AI Data Delivery

AI Data Delivery — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Pixel binning

Pixel binning, also known as binning, is a process image sensors of digital cameras use to combine adjacent pixels throughout an image, by summing or averaging their values, during or after readout. It improves low-light performance while still allowing for highly detailed photographs in good light. Charge from adjacent pixels in CCD or charge-coupled device image sensors and some other image sensors can be combined during readout, increasing the line rate or frame rate. In the context of image processing, binning is the procedure of combining clusters of adjacent pixels, throughout an image, into single pixels. For example, in 2×2 binning, an array of 4 pixels becomes a single larger pixel, reducing the number of pixels to 1/4 and halving the image resolution in each dimension. The result can be the sum, average, median, minimum, or maximum value of the cluster. Some systems use more advanced algorithms such as considering the values of nearby pixels, edge detection, self-claimed "AI", etc. to increase the perceived visual quality of the final downsized image. This aggregation, although associated with loss of information, reduces the amount of data to be processed, facilitating analysis. The binned image has lower resolution, but the relative noise level in each pixel is generally reduced. == History == Normally, an increase in megapixel count on a constant image sensor size would lead to a sacrifice of the surface size of the individual pixels, which would result in each pixel being able to catch less light in the same time, thus leading to a darker and/or noisier image in low light (given the same exposure time). In the past, camera manufacturers had to compromise between low-light performance and the amount of detail in good light, by dropping the megapixel count like HTC did in 2013 with their four-megapixel "UltraPixel" camera. However, this results in less detailed images in daylight where enough light is available. With pixel binning, the camera has "the best of both worlds", meaning both the benefit of high detail in good light and the benefit of high brightness in low light. In low light, the surfaces of four or more pixels can act as one large pixel that catches far more light. For example, some smartphones such as the Samsung Galaxy A15 are able to capture photographs with up to fifty megapixels in daylight. However, in low light, the individual pixels would be too small to capture the light needed for a bright image with the short exposure time available for handheld shooting. Therefore, with pixel binning activated, the 50-megapixel image sensor acts as a 12.5-megapixel image sensor, a quarter of its original resolution, with an accordingly larger surface area per pixel.
Read more →
Gold (linker)

In software engineering, gold is a linker for ELF files. It became an official GNU package and was added to binutils in March 2008 and first released in binutils version 2.19. gold was developed by Ian Lance Taylor and a small team at Google. The motivation for writing gold was to make a linker that is faster than the GNU linker, especially for large applications coded in C++. Unlike the GNU linker, gold does not use the BFD library to process object files. While this limits the object file formats it can process to ELF only, it is also claimed to result in a cleaner and faster implementation without an additional abstraction layer. The author cited complete removal of BFD as a reason to create a new linker from scratch rather than incrementally improve the GNU linker. This rewrite also fixes some bugs in old ld that break ELF files in various minor ways. To specify gold in a makefile, one sets the LD or LD environment variable to ld.gold. To specify gold through a compiler option, one can use the gcc option -fuse-ld=gold. Fedora has moved gold from binutils into its own package due to concerns it is suffering from bitrot after Google's interest has moved to LLVM. In particular, gold does not read LDFLAGS variable, so cannot see libraries in folders like /usr/local/lib. On 2025-02-02 the 2.44 version of GNU Binutils removed gold from the default source distribution and into a separate package, stating that "the gold linker is now deprecated and will eventually be removed unless volunteers step forward and offer to continue development and maintenance".
Read more →
Cloud load balancing

Cloud load balancing is a type of load balancing that is performed in cloud computing. Cloud load balancing is the process of distributing workloads across multiple computing resources. Cloud load balancing reduces costs associated with document management systems and maximizes availability of resources. It is a type of load balancing and not to be confused with Domain Name System (DNS) load balancing. While DNS load balancing uses software or hardware to perform the function, cloud load balancing uses services offered by various computer network companies. == Comparison With DNS load balancing == Cloud load balancing has an advantage over DNS load balancing as it can transfer loads to servers globally as opposed to distributing it across local servers. In the event of a local server outage, cloud load balancing delivers users to the closest regional server without interruption for the user. Cloud load balancing addresses issues relating to TTL reliance present during DNS load balancing. DNS directives can only be enforced once in every TTL cycle and can take several hours if switching between servers during a lag or server failure. Incoming server traffic will continue to route to the original server until the TTL expires and can create an uneven performance as different internet service providers may reach the new server before other internet service providers. Another advantage is that cloud load balancing improves response time by routing remote sessions to the best performing data centers. == Importance of Load Balancing == Cloud computing brings advantages in "cost, flexibility and availability of service users." Those advantages drive the demand for Cloud services. The demand raises technical issues in Service Oriented Architectures and Internet of Services (IoS)-style applications, such as high availability and scalability. As a major concern in these issues, load balancing allows cloud computing to "scale up to increasing demands" by efficiently allocating dynamic local workload evenly across all nodes. == Load Balancing Techniques == === Scheduling Algorithms === Opportunistic Load Balancing (OLB) is the algorithm that assigns workloads to nodes in free order. It is simple but does not consider the expected execution time of each node. Load balance Min-Min (LBMM) assigns sub-tasks to the node which requires minimum execution time. === Load Balancing Policies === Workload and Client Aware Policy (WCAP) specifies the unique and special property (USP) of requests and computing nodes. With the information of USP, the schedule can decide the most suitable node to complete a request. WCAP makes the most of computing nodes by reducing their idle time. Also, it reduces performance time through searches based on content information. === A Comparative Study of Algorithms === Biased Random Sampling bases its job allocation on the network represented by a directed graph. For each execution node in this graph, in-degree means available resources and out-degree means allocated jobs. In-degree will decrease during job execution while out-degree will increase after job allocation. Active Clustering is a self-aggregation algorithm to rewire the network. The experiment result is that"Active Clustering and Random Sampling Walk predictably perform better as the number of processing nodes is increased" while the Honeyhive algorithm does not show the increasing pattern. == Client-side Load Balancer Using Cloud Computing == Load balancer forwards packets to web servers according to different workloads on servers. However, it is hard to implement a scalable load balancer because of both the "cloud's commodity business model and the limited infrastructure control allowed by cloud providers." Client-side Load Balancer (CLB) solve this problem by using a scalable cloud storage service. CLB allows clients to choose back-end web servers for dynamic content although it delivers static content.
Read more →
Cloudflare

Cloudflare, Inc., is an American technology company headquartered in San Francisco, California, that provides a range of internet services, including content delivery network (CDN) services, cloud cybersecurity, DDoS mitigation, and ICANN-accredited domain registration. The company's services act primarily as a reverse proxy between website visitors and a customer's hosting provider, improving performance and protecting against malicious traffic. Cloudflare was founded in 2009 by Matthew Prince, Lee Holloway, and Michelle Zatlyn. The company went public on the New York Stock Exchange in 2019 under the ticker symbol NET. Cloudflare has since expanded its offerings to include edge computing through its Workers platform, a public DNS resolver (1.1.1.1), and a VPN-like service known as WARP. In recent years, the company has integrated artificial intelligence into its infrastructure, acquiring companies such as Replicate and launching tools to manage AI bots and scrapers. According to W3Techs, Cloudflare is used by approximately 21.3% of all websites on the Internet as of January 2026. The company has been the subject of controversy regarding its policy of content neutrality. While Cloudflare executives have historically advocated for remaining a neutral infrastructure provider, the company has terminated services for specific high-profile websites associated with hate speech and violence, including The Daily Stormer, 8chan, and Kiwi Farms, following significant public pressure. Cloudflare has also faced criticism and litigation regarding copyright infringement by websites using its services, notably losing a lawsuit against Japanese publishers in 2025. The company experienced significant global outages in late 2025 which disrupted services for major platforms internationally. == History == Cloudflare was founded on July 26, 2009, by Matthew Prince, Lee Holloway, and Michelle Zatlyn. Prince and Holloway had previously collaborated on Project Honey Pot, a product of Unspam Technologies that partly inspired the basis of Cloudflare. In 2009, the company was venture-capital funded. On August 15, 2019, Cloudflare submitted its S-1 filing for an initial public offering on the New York Stock Exchange under the stock ticker NET. It opened for public trading on September 13, 2019, at $15 per share. According to the company, the name 'Cloudflare' was chosen, over the initial 'WebWall', because it best described what they were trying to do: build a "firewall in the cloud." In 2020, Cloudflare co-founder and COO Michelle Zatlyn was named president. Cloudflare has acquired web-services and security companies, including StopTheHacker (February 2014), CryptoSeal (June 2014), Eager Platform Co. (December 2016), Neumob (November 2017), S2 Systems (January 2020), Linc (December 2020), Zaraz (December 2021), Vectrix (February 2022), Area 1 Security (February 2022), Nefeli Networks (March 2024), BastionZero (May 2024), and Kivera (October 2024). Replicate (November 2025), and Human Native (January 2026). Since at least 2017, Cloudflare has used a wall of lava lamps at its San Francisco headquarters as a source of randomness for encryption keys, alongside double pendulums at its London offices and a Geiger counter at its Singapore offices. The lava lamp installation implements the Lavarand method, where a camera transforms the unpredictable shapes of the "lava" blobs into a digital image. In Q4 2022, Cloudflare provided paid services to 162,086 customers. In October 2024, Cloudflare won a lawsuit against patent troll Sable Networks. Sable paid Cloudflare $225,000, granted it a royalty-free license to its patent portfolio, and dedicated its patents to the public by abandoning its patent rights. In November 2025, it was announced Cloudflare had agreed to acquire Replicate, a San Francisco–based platform that enables software developers to run, fine-tune, and deploy open-source machine-learning models via an API without managing infrastructure. In January 2026, Cloudflare released an analysis regarding BGP routing leaks observed from the Venezuelan state-owned ISP CANTV (AS8048), which occurred on January 2 coincides with the arrest of Nicolás Maduro. While some security researchers had speculated that the outages were linked to U.S. cyber operations, Cloudflare's data indicated that the anomalies were consistent with a pattern of "insufficient routing export and import policies" by the ISP rather than malicious external interference. In January 2026, Cloudflare acquired Human Native, an AI data marketplace that brokers transactions between developers and content creators, for an undisclosed amount. On January 16, 2026, Cloudflare acquired The Astro Technology Company, the developers behind the open-source web framework Astro. In May 2026, Cloudflare announced the elimination of approximately 1,100 positions, around 20 percent of its workforce, in a restructuring the company attributed to the rapid adoption of artificial intelligence tools. The announcement coincided with the company's first-quarter 2026 earnings, which reported a record $639.8 million in quarterly revenue, a 34 percent year-over-year increase. CEO Matthew Prince stated the cuts were not driven by performance concerns but reflected roles made obsolete by AI, and that Cloudflare expected to employ more people by the end of 2027 than at any point during 2026. == Products == Cloudflare provides network and security products for consumers and businesses, utilizing edge computing, reverse proxies for web traffic, data center interconnects, and a content distribution network to serve content across its network of servers. It supports transport layer protocols TCP, UDP, QUIC, and many application layer protocols such as DNS over HTTPS, SMTP, and HTTP/2 with support for HTTP/2 Server Push. As of 2023, Cloudflare handles an average of 45 million HTTP requests per second. As of 2024, Cloudflare servers are powered by AMD EPYC 9684X processors. Cloudflare also provides analysis and reports on large-scale outages, including Verizon's October 2024 outage. === Artificial intelligence === In 2023, Cloudflare launched "Workers AI", a framework allowing for use of Nvidia GPU's within Cloudflare's network. In 2024, Cloudflare launched a tool that prevents bots from scraping websites. To build automatic bot detector models, the company analyzed "AI" bots and crawler traffic. The company also launched an "AI" assistant to generate charts based on queries by leveraging "Workers AI". Cloudflare announced plans in September 2024 to launch a marketplace where website owners can sell "AI" model providers access to scrape their site's content. In March 2025, Cloudflare announced a new feature called "AI Labyrinth", which combats unauthorized "AI" data scraping by serving fake "AI"-generated content to LLM bots. In July, the company rolled out a permission-based setting to allow websites to automatically block online bots from scraping data and content. Cloudflare released AutoRAG into beta in 2025. AutoRAG (retrieval augmented generation) creates a vector database of a website's unstructured content to identify relationships between concepts. It is part of an initiative with Microsoft, alongside their NLWeb standard, to make websites easier for people and automated systems to query. Cloudflare and GoDaddy partnered in April 2026 to enable AI Crawl Control features on GoDaddy hosted websites. This would allow site owners to decide how AI bot crawlers interact with their content. === DDoS mitigation === Cloudflare provides free and paid DDoS mitigation services that protect customers from distributed denial of service (DDoS) attacks. Cloudflare received media attention in June 2011 for providing DDoS mitigation for the website of LulzSec, a black hat hacking group. In March 2013, The Spamhaus Project was targeted by a DDoS attack that Cloudflare reported exceeded 300 gigabits per second (Gbit/s). Patrick Gilmore, of Akamai, stated that at the time it was "the largest publicly announced DDoS attack in the history of the Internet". While trying to defend Spamhaus against the DDoS attacks, Cloudflare ended up being attacked as well; Google and other companies eventually came to Spamhaus' defense and helped it to absorb the unprecedented amount of attack traffic. In 2014, Cloudflare began providing free DDoS mitigation for artists, activists, journalists, and human rights groups under the name "Project Galileo". In 2017, it extended the service to electoral infrastructure and political campaigns under the name "Athenian Project". By 2025, more than 2,900 users and organizations were participating in Project Galileo, including 31 US states. In February 2014, Cloudflare claimed to have mitigated an NTP reflection attack against an unnamed European customer, which it stated peaked at 400 Gbit/s. In November 2014, it reported a 500 Gbit/s DDoS attack in Hong Kong. In July 2021, the company claimed to have absorbed a DDoS atta
Read more →
Hyperparameter (machine learning)

In machine learning, a hyperparameter is a parameter that can be set in order to define any configurable part of a model's learning process. Hyperparameters can be classified as either model hyperparameters (such as the topology and size of a neural network) or algorithm hyperparameters (such as the learning rate and the batch size of an optimizer). These are named hyperparameters in contrast to parameters, which are characteristics that the model learns from the data. Hyperparameters are not required by every model or algorithm. Some simple algorithms such as ordinary least squares regression require none. However, the LASSO algorithm, for example, adds a regularization hyperparameter to ordinary least squares which must be set before training. Even models and algorithms without a strict requirement to define hyperparameters may not produce meaningful results if these are not carefully chosen. However, optimal values for hyperparameters are not always easy to predict. Some hyperparameters may have no meaningful effect, or one important variable may be conditional upon the value of another. Often a separate process of hyperparameter tuning is needed to find a suitable combination for the data and task. As well as improving model performance, hyperparameters can be used by researchers to introduce robustness and reproducibility into their work, especially if it uses models that incorporate random number generation. == Considerations == The time required to train and test a model can depend upon the choice of its hyperparameters. A hyperparameter is usually of continuous or integer type, leading to mixed-type optimization problems. The existence of some hyperparameters is conditional upon the value of others, e.g. the size of each hidden layer in a neural network can be conditional upon the number of layers. === Difficulty-learnable parameters === The objective function is typically non-differentiable with respect to hyperparameters. As a result, in most instances, hyperparameters cannot be learned using gradient-based optimization methods (such as gradient descent), which are commonly employed to learn model parameters. These hyperparameters are those parameters describing a model representation that cannot be learned by common optimization methods, but nonetheless affect the loss function. An example would be the tolerance hyperparameter for errors in support vector machines. === Untrainable parameters === Sometimes, hyperparameters cannot be learned from the training data because they aggressively increase the capacity of a model and can push the loss function to an undesired minimum (overfitting to the data), as opposed to correctly mapping the richness of the structure in the data. For example, if we treat the degree of a polynomial equation fitting a regression model as a trainable parameter, the degree would increase until the model perfectly fit the data, yielding low training error, but poor generalization performance. === Tunability === Most performance variation can be attributed to just a few hyperparameters. The tunability of an algorithm, hyperparameter, or interacting hyperparameters is a measure of how much performance can be gained by tuning it. For an LSTM, while the learning rate followed by the network size are its most crucial hyperparameters, batching and momentum have no significant effect on its performance. Although some research has advocated the use of mini-batch sizes in the thousands, other work has found the best performance with mini-batch sizes between 2 and 32. === Robustness === An inherent stochasticity in learning directly implies that the empirical hyperparameter performance is not necessarily its true performance. Methods that are not robust to simple changes in hyperparameters, random seeds, or even different implementations of the same algorithm cannot be integrated into mission critical control systems without significant simplification and robustification. Reinforcement learning algorithms, in particular, require measuring their performance over a large number of random seeds, and also measuring their sensitivity to choices of hyperparameters. Their evaluation with a small number of random seeds does not capture performance adequately due to high variance. Some reinforcement learning methods, e.g. DDPG (Deep Deterministic Policy Gradient), are more sensitive to hyperparameter choices than others. == Optimization == Hyperparameter optimization finds a tuple of hyperparameters that yields an optimal model which minimizes a predefined loss function on given test data. The objective function takes a tuple of hyperparameters and returns the associated loss. Typically these methods are not gradient based, and instead apply concepts from derivative-free optimization or black box optimization. == Reproducibility == Apart from tuning hyperparameters, machine learning involves storing and organizing the parameters and results, and making sure they are reproducible. In the absence of a robust infrastructure for this purpose, research code often evolves quickly and compromises essential aspects like bookkeeping and reproducibility. Online collaboration platforms for machine learning go further by allowing scientists to automatically share, organize and discuss experiments, data, and algorithms. Reproducibility can be particularly difficult for deep learning models. For example, research has shown that deep learning models depend very heavily even on the random seed selection of the random number generator.
Read more →
IBM ALP

IBM Assembly Language Processor (ALP) is an assembler written by IBM for 32-bit OS/2 Warp (OS/2 3.0), which was released in 1994. ALP accepts source programs compatible with Microsoft Macro Assembler (MASM) version 5.1, which was originally used to build many of the device drivers included with OS/2. For OS/2 versions 3 and 4, ALP was distributed, along with other tools and documentation, as part of the Device Driver Kit (DDK). The DDK was withdrawn in 2004 as part of IBM's discontinuance of OS/2.
Read more →
Color balance

In photography and image processing, color balance is the global adjustment of the intensities of the colors (typically red, green, and blue primary colors). An important goal of this adjustment is to render specific colors – particularly neutral colors like white or grey – correctly. Hence, the general method is sometimes called gray balance, neutral balance, or white balance. Color balance changes the overall mixture of colors in an image and is used for color correction. Generalized versions of color balance are used to correct colors other than neutrals or to deliberately change them for effect. White balance is one of the most common kinds of balancing, and is when colors are adjusted to make a white object (such as a piece of paper or a wall) appear white and not a shade of any other colour. Image data acquired by sensors – either film or electronic image sensors – must be transformed from the acquired values to new values that are appropriate for color reproduction or display. Several aspects of the acquisition and display process make such color correction essential – including that the acquisition sensors do not match the sensors in the human eye, that the properties of the display medium must be accounted for, and that the ambient viewing conditions of the acquisition differ from the display viewing conditions. The color balance operations in popular image editing applications usually operate directly on the red, green, and blue channel pixel values, without respect to any color sensing or reproduction model. In film photography, color balance is typically achieved by using color correction filters over the lights or on the camera lens. == Generalized color balance == Sometimes the adjustment to keep neutrals neutral is called white balance, and the phrase color balance refers to the adjustment that in addition makes other colors in a displayed image appear to have the same general appearance as the colors in an original scene. It is particularly important that neutral (gray, neutral, white) colors in a scene appear neutral in the reproduction. === Psychological color balance === Humans relate to flesh tones more critically than other colors. Trees, grass and sky can all be off without concern, but if human flesh tones are 'off' then the human subject can look sick or dead. To address this critical color balance issue, the tri-color primaries themselves are formulated to not balance as a true neutral color. The purpose of this color primary imbalance is to more faithfully reproduce the flesh tones through the entire brightness range. == Illuminant estimation and adaptation == Most digital cameras have means to select color correction based on the type of scene lighting, using either manual lighting selection, automatic white balance, or custom white balance. The algorithms for these processes perform generalized chromatic adaptation. Many methods exist for color balancing. Setting a button on a camera is a way for the user to indicate to the processor the nature of the scene lighting. Another option on some cameras is a button which one may press when the camera is pointed at a gray card or other neutral colored object. This captures an image of the ambient light, which enables a digital camera to set the correct color balance for that light. There is a large literature on how one might estimate the ambient lighting from the camera data and then use this information to transform the image data. A variety of algorithms have been proposed, and the quality of these has been debated. A few examples and examination of the references therein will lead the reader to many others. Examples are Retinex, an artificial neural network or a Bayesian method. == Chromatic colors == Color balancing an image affects not only the neutrals, but other colors as well. An image that is not color balanced is said to have a color cast, as everything in the image appears to have been shifted towards one color. Color balancing may be thought in terms of removing this color cast. Color balance is also related to color constancy. Algorithms and techniques used to attain color constancy are frequently used for color balancing, as well. Color constancy is, in turn, related to chromatic adaptation. Conceptually, color balancing consists of two steps: first, determining the illuminant under which an image was captured; and second, scaling the components (e.g., R, G, and B) of the image or otherwise transforming the components so they conform to the viewing illuminant. Viggiano found that white balancing in the camera's native RGB color model tended to produce less color inconstancy (i.e., less distortion of the colors) than in monitor RGB for over 4000 hypothetical sets of camera sensitivities. This difference typically amounted to a factor of more than two in favor of camera RGB. This means that it is advantageous to get color balance right at the time an image is captured, rather than edit later on a monitor. If one must color balance later, balancing the raw image data will tend to produce less distortion of chromatic colors than balancing in monitor RGB. == Mathematics of color balance == Color balancing is sometimes performed on a three-component image (e.g., RGB) using a 3x3 matrix. This type of transformation is appropriate if the image was captured using the wrong white balance setting on a digital camera, or through a color filter. Changing the color balance of an image can improve classifier results on a trained ML model. === Scaling monitor R, G, and B === In principle, one wants to scale all relative luminances in an image so that objects which are believed to be neutral appear so. If, say, a surface with R = 240 {\displaystyle R=240} was believed to be a white object, and if 255 is the count which corresponds to white, one could multiply all red values by 255/240. Doing analogously for green and blue would result, at least in theory, in a color balanced image. In this type of transformation the 3x3 matrix is a diagonal matrix. [ R G B ] = [ 255 / R w ′ 0 0 0 255 / G w ′ 0 0 0 255 / B w ′ ] [ R ′ G ′ B ′ ] {\displaystyle \left[{\begin{array}{c}R\\G\\B\end{array}}\right]=\left[{\begin{array}{ccc}255/R'_{w}&0&0\\0&255/G'_{w}&0\\0&0&255/B'_{w}\end{array}}\right]\left[{\begin{array}{c}R'\\G'\\B'\end{array}}\right]} where R {\displaystyle R} , G {\displaystyle G} , and B {\displaystyle B} are the color balanced red, green, and blue components of a pixel in the image; R ′ {\displaystyle R'} , G ′ {\displaystyle G'} , and B ′ {\displaystyle B'} are the red, green, and blue components of the image before color balancing, and R w ′ {\displaystyle R'_{w}} , G w ′ {\displaystyle G'_{w}} , and B w ′ {\displaystyle B'_{w}} are the red, green, and blue components of a pixel which is believed to be a white surface in the image before color balancing. This is a simple scaling of the red, green, and blue channels, and is why color balance tools in Photoshop have a white eyedropper tool. It has been demonstrated that performing the white balancing in the phosphor set assumed by sRGB tends to produce large errors in chromatic colors, even though it can render the neutral surfaces perfectly neutral. === Scaling X, Y, Z === If the image may be transformed into CIE XYZ tristimulus values, the color balancing may be performed there. This has been termed a "wrong von Kries" transformation. Although it has been demonstrated to offer usually poorer results than balancing in monitor RGB, it is mentioned here as a bridge to other things. Mathematically, one computes: [ X Y Z ] = [ X w / X w ′ 0 0 0 Y w / Y w ′ 0 0 0 Z w / Z w ′ ] [ X ′ Y ′ Z ′ ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\left[{\begin{array}{ccc}X_{w}/X'_{w}&0&0\\0&Y_{w}/Y'_{w}&0\\0&0&Z_{w}/Z'_{w}\end{array}}\right]\left[{\begin{array}{c}X'\\Y'\\Z'\end{array}}\right]} where X {\displaystyle X} , Y {\displaystyle Y} , and Z {\displaystyle Z} are the color-balanced tristimulus values; X w {\displaystyle X_{w}} , Y w {\displaystyle Y_{w}} , and Z w {\displaystyle Z_{w}} are the tristimulus values of the viewing illuminant (the white point to which the image is being transformed to conform to); X w ′ {\displaystyle X'_{w}} , Y w ′ {\displaystyle Y'_{w}} , and Z w ′ {\displaystyle Z'_{w}} are the tristimulus values of an object believed to be white in the un-color-balanced image, and X ′ {\displaystyle X'} , Y ′ {\displaystyle Y'} , and Z ′ {\displaystyle Z'} are the tristimulus values of a pixel in the un-color-balanced image. If the tristimulus values of the monitor primaries are in a matrix P {\displaystyle \mathbf {P} } so that: [ X Y Z ] = P [ L R L G L B ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\mathbf {P} \left[{\begin{array}{c}L_{R}\\L_{G}\\L_{B}\end{array}}\right]} where L R {\displaystyle L_{R}} , L G {\displaystyle L_{G}} , and L B {\displaystyle L_{B}} are the un-gamma corrected monitor RGB, one may use: [ L R L G L B ] = P − 1 [ X w / X w ′ 0 0
Read more →
Test data management

Test data management (TDM) is a process in software testing concerned with the creation, preparation, and control of data used for testing software systems. It involves supplying datasets required to execute test cases and verifying system behaviour under defined conditions. Test data management is an integral part of the software development lifecycle (SDLC) and is utilized in both manual and automated testing processes. It is applied in environments that use continuous integration and DevOps practices, where test execution requires consistent and repeatable data conditions. == Overview == Test data management includes the generation, selection, and preparation of data for testing purposes, as well as its distribution across test environments. It also involves controlling data versions and ensuring that datasets correspond to specific test scenarios. In many cases, production data is adapted for testing through techniques such as masking or subsetting to reduce size and remove sensitive content. Test data management ensures that test cases are executed with relevant, consistent, and readily available data. This reduces variability in test results and supports reproducibility across test cycles. == Importance == The role of test data management has expanded with the growth of complex, data-driven systems and regulatory requirements governing data usage. Testing often depends on data that reflects real-world conditions, but direct use of production data may introduce security and privacy risks. As a result, organizations apply methods such as data masking and anonymization to meet compliance requirements, including those set by the California Privacy Rights Act (CPRA) and Europe’s General Data Protection Regulation (GDPR). Inadequate control of test data can lead to incomplete test coverage, unreliable test results, or delays in testing processes due to unavailable or inconsistent datasets. == Techniques and tools == Test data management leverages various techniques for preparing and controlling data used in testing. These include the generation of synthetic data, the extraction of subsets from production datasets, and the modification of data to remove or obscure sensitive information. A key technical requirement in these processes is maintaining referential integrity, or ensuring that relationships between data entities remain consistent across different tables and systems after masking or subsetting. Data virtualization is also used to provide access to datasets without full replication. These methods may be implemented using software tools that automate data preparation, masking, and distribution.
Read more →
Image formation

The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.
Read more →
Viaweb

Viaweb was a web-based application that allowed users to build and host their own online stores with little technical expertise using a web browser. The company was started in July 1995 by Paul Graham, Robert Morris (using the pseudonym "John McArtyem"), and Trevor Blackwell. Graham claims Viaweb was the first application service provider. Viaweb was also unusual for being partially written in the Lisp programming language. The software was originally called Webgen, but another company was using the same name, so the company renamed it to Viaweb, "because it worked via the Web". In 1998, Yahoo! Inc. bought Viaweb for 455,000 shares of Yahoo! capital stock, valued at about $49 million, and renamed it Yahoo! Store. Viaweb's example has been influential in Silicon Valley's entrepreneurial culture, largely due to Graham's widely read essays and his subsequent career as a successful venture capitalist.
Read more →
Content Disarm and Reconstruction

Content Disarm and Reconstruction (CDR) is a computer security technology for removing potentially malicious code from files. Unlike malware analysis, CDR technology does not determine or detect malware's functionality but removes all file components that are not approved within the system's definitions and policies. It is used to prevent cyber security threats from entering a corporate network perimeter. Channels that CDR can be used to protect include email and website traffic. Advanced solutions can also provide similar protection on computer endpoints, or cloud email and file sharing services. There are three levels of CDR; 1) flattening and converting the original file to a PDF, 2) stripping active content while keeping the original file type, and 3) eliminating all file-borne risk while maintaining file type, integrity and active content. Beyond these three levels, there are also more advanced forms of CDR that is able to perform "soft conversion" and "hard conversion", based on the user's preference in balancing usability and security. == Applications == CDR works by processing all incoming files of an enterprise network, deconstructing them, and removing the elements that do not match the file type's standards or set policies. CDR technology then rebuilds the files into clean versions that can be sent on to end users as intended. Because CDR removes all potentially malicious code, it can be effective against zero-day vulnerabilities that rely on being an unknown threat that other security technologies would need to patch against to maintain protection. CDR can be used to prevent cyber threats from variety of sources: Email Data Diodes Web Browsers Endpoints File Servers FTP Cloud email or webmail programs SMB/CIFS Removable media scanning (CDR Kiosk) CDR can be applied to a variety of file formats including: Images Office documents PDF Audio/video file formats Archives HTML == Open source implementations == DocBleach ExeFilter
Read more →
Kounta (software company)

Kounta is an Australian software company founded in 2012. The company's flagship product, Kounta, comprises a cloud based point of sale mobile app. == History == Kounta was founded in 2012 by entrepreneur Nick Cloete. The company is headquartered in Sydney, Australia. In 2012, the company launched its flagship product, Kounta, a hospitality-focused point of sale (POS) mobile app for iPad, Android, Mac, and Windows. The app was initially a web-based application, and later developed into an online cash register and inventory management system that allows businesses to take payments from customers via mobile devices. The app has been made available for iPad, iPhone, and Android devices; as well as iOS, Windows, and other peripherals. In 2012, Kounta partnered with Epson, providing a cloud-based POS platform for Epson printers. In 2013, the company formed a partnership with PayPal, integrating cashless and cardless transaction options via PayPal's mobile app. In 2014, MYOB (company) made an undisclosed investment towards Kounta. This partnership led to the development of MYOB Kounta, a co-branded application merging Kounta's POS with MYOB's application software. MYOB Kounta launched in October of the same year. In 2016, Kounta announced a partnership with the Commonwealth Bank of Australia to include the Kounta app onto "Albert", the bank's EFTPOS tablet, which allowed the Commonwealth Bank of Australia to become the first bank to manage all customers operations from a single device and mobile application. == Technology == The Kounta POS is a software-as-a-service (SaaS) that runs as an application in web browsers as well as natively on iOS and Android operating systems. Kounta also incorporates an Open API, making it possible for other software providers to integrate complementary apps, further extending the software's use. Traditional IT tasks, such as data backup and encryption, hardware maintenance, and server upgrades are handled by Kounta's data center. Kounta is made accessible via paid monthly subscription licenses. == Acquisition by Lightspeed == In October 2019, Kounta was acquired by Lightspeed, an advanced commerce platform for retail, hospitality, and golf businesses based in Montreal, Canada. Lightspeed acquired Kounta for $35.3 million USD.
Read more →
International Medical Education Directory

The International Medical Education Directory (IMED) was a public database of worldwide medical schools. The IMED was published as a joint collaboration of the Educational Commission for Foreign Medical Graduates (ECFMG) and the Foundation for Advancement of International Medical Education and Research (FAIMER). The information available in IMED was derived from data collected by the Educational Commission for Foreign Medical Graduates (ECFMG) throughout its history of evaluating the medical education credentials of international medical graduates. Using these data as a starting point, Foundation for Advancement of International Medical Education and Research (FAIMER) began developing IMED in 2001 and made it publicly available in April 2002. In April 2014, IMED was merged with the Avicenna Directory to create the World Directory of Medical Schools. The World Directory is now the definitive list of medical schools in the world, as IMED and Avicenna were discontinued in 2015.
Read more →
Test data management

Test data management (TDM) is a process in software testing concerned with the creation, preparation, and control of data used for testing software systems. It involves supplying datasets required to execute test cases and verifying system behaviour under defined conditions. Test data management is an integral part of the software development lifecycle (SDLC) and is utilized in both manual and automated testing processes. It is applied in environments that use continuous integration and DevOps practices, where test execution requires consistent and repeatable data conditions. == Overview == Test data management includes the generation, selection, and preparation of data for testing purposes, as well as its distribution across test environments. It also involves controlling data versions and ensuring that datasets correspond to specific test scenarios. In many cases, production data is adapted for testing through techniques such as masking or subsetting to reduce size and remove sensitive content. Test data management ensures that test cases are executed with relevant, consistent, and readily available data. This reduces variability in test results and supports reproducibility across test cycles. == Importance == The role of test data management has expanded with the growth of complex, data-driven systems and regulatory requirements governing data usage. Testing often depends on data that reflects real-world conditions, but direct use of production data may introduce security and privacy risks. As a result, organizations apply methods such as data masking and anonymization to meet compliance requirements, including those set by the California Privacy Rights Act (CPRA) and Europe’s General Data Protection Regulation (GDPR). Inadequate control of test data can lead to incomplete test coverage, unreliable test results, or delays in testing processes due to unavailable or inconsistent datasets. == Techniques and tools == Test data management leverages various techniques for preparing and controlling data used in testing. These include the generation of synthetic data, the extraction of subsets from production datasets, and the modification of data to remove or obscure sensitive information. A key technical requirement in these processes is maintaining referential integrity, or ensuring that relationships between data entities remain consistent across different tables and systems after masking or subsetting. Data virtualization is also used to provide access to datasets without full replication. These methods may be implemented using software tools that automate data preparation, masking, and distribution.
Read more →
Crucible (software)

Crucible is a collaborative code review application by Australian software company Atlassian. Like other Atlassian products, Crucible is a Web-based application primarily aimed at enterprise, and certain features that enable peer review of a codebase may be considered enterprise social software. Crucible is particularly tailored to remote workers, and facilitates asynchronous review and commenting on code. Crucible also integrates with popular source control tools, such as Git and Subversion. Crucible is not open source, but customers are allowed to view and modify the code for their own use.
Read more →