AI Data Analyst Zalando

AI Data Analyst Zalando — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Artificial consciousness

    Artificial consciousness

    Artificial consciousness, also known as machine consciousness, synthetic consciousness, or digital consciousness, is consciousness hypothesized to be possible for artificial intelligence. It is also the corresponding field of study, which draws insights from philosophy of mind, philosophy of artificial intelligence, cognitive science and neuroscience. The term "sentience" can be used when specifically designating ethical considerations stemming from a form of phenomenal consciousness (P-consciousness, or the ability to feel qualia). Since sentience involves the ability to experience ethically positive or negative (i.e., valenced) mental states, it may justify welfare concerns and legal protection, as with non-human animals. Some scholars believe that consciousness is generated by the interoperation of various parts of the brain; these mechanisms are labeled the neural correlates of consciousness (NCC). Some further believe that constructing a system (e.g., a computer system) that can emulate this NCC interoperation would result in a system that is conscious. Some scholars reject the possibility of non-biological conscious beings. == Philosophical views == As there are many hypothesized types of consciousness, there are many potential implementations of artificial consciousness. In the philosophical literature, perhaps the most common taxonomy of consciousness is into "access" and "phenomenal" variants. Access consciousness concerns those aspects of experience that can be apprehended, while phenomenal consciousness concerns those aspects of experience that seemingly cannot be apprehended, instead being characterized qualitatively in terms of "raw feels", "what it is like" or qualia. === Plausibility debate === Type-identity theorists and other skeptics hold the view that consciousness can be realized only in particular physical systems because consciousness has properties that necessarily depend on physical constitution. In his 2001 article "Artificial Consciousness: Utopia or Real Possibility," Giorgio Buttazzo says that a common objection to artificial consciousness is that, "Working in a fully automated mode, they [the computers] cannot exhibit creativity, unreprogrammation (which means can 'no longer be reprogrammed', from rethinking), emotions, or free will. A computer, like a washing machine, is a slave operated by its components." For other theorists (e.g., functionalists), who define mental states in terms of causal roles, any system that can instantiate the same pattern of causal roles, regardless of physical constitution, will instantiate the same mental states, including consciousness. ==== Thought experiments ==== David Chalmers proposed two thought experiments intending to demonstrate that "functionally isomorphic" systems (those with the same "fine-grained functional organization", i.e., the same information processing) will have qualitatively identical conscious experiences, regardless of whether they are based on biological neurons or digital hardware. The "fading qualia" is a reductio ad absurdum thought experiment. It involves replacing, one by one, the neurons of a brain with a functionally identical component, for example based on a silicon chip. Chalmers makes the hypothesis, knowing it in advance to be absurd, that "the qualia fade or disappear" when neurons are replaced one-by-one with identical silicon equivalents. Since the original neurons and their silicon counterparts are functionally identical, the brain's information processing should remain unchanged, and the subject's behaviour and introspective reports would stay exactly the same. Chalmers argues that this leads to an absurd conclusion: the subject would continue to report normal conscious experiences even as their actual qualia fade away. He concludes that the subject's qualia actually don't fade, and that the resulting robotic brain, once every neuron is replaced, would remain just as sentient as the original biological brain. Similarly, the "dancing qualia" thought experiment is another reductio ad absurdum argument. It supposes that two functionally isomorphic systems could have different perceptions (for instance, seeing the same object in different colors, like red and blue). It involves a switch that alternates between a chunk of brain that causes the perception of red, and a functionally isomorphic silicon chip, that causes the perception of blue. Since both perform the same function within the brain, the subject would not notice any change during the switch. Chalmers argues that this would be highly implausible if the qualia were truly switching between red and blue, hence the contradiction. Therefore, he concludes that the equivalent digital system would not only experience qualia, but it would perceive the same qualia as the biological system (e.g., seeing the same color). Greg Egan's short story Learning To Be Me (mentioned in §In fiction), illustrates how undetectable duplication of the brain and its functionality could be from a first-person perspective. Critics object that Chalmers' proposal begs the question in assuming that all mental properties and external connections are already sufficiently captured by abstract causal organization. Van Heuveln et al. argue that the dancing qualia argument contains an equivocation fallacy, conflating a "change in experience" between two systems with an "experience of change" within a single system. Mogensen argues that the fading qualia argument can be resisted by appealing to vagueness at the boundaries of consciousness and the holistic structure of conscious neural activity, which suggests consciousness may require specific biological substrates rather than being substrate-independent. Anil Seth argues that the complexity of brain neurons intrinsically matters in addition to their function and that it is not possible to replace any part of the brain with a perfect silicon equivalent. He points out that some of biological neurons exhibit activity aimed at cleaning up metabolic waste products, and writes that a perfect silicon replacement would require a silicon-based metabolism, but silicon is not suitable for creating such artificial metabolism. ==== In large language models ==== In 2022, Google engineer Blake Lemoine made a viral claim that Google's LaMDA chatbot was sentient. Lemoine supplied as evidence the chatbot's humanlike answers to many of his questions; however, the chatbot's behavior was judged by the scientific community as likely a consequence of mimicry, rather than machine sentience. Lemoine's claim was widely derided for being ridiculous. Moreover, attributing consciousness based solely on the basis of LLM outputs or the immersive experience created by an algorithm is considered a fallacy. However, while philosopher Nick Bostrom states that LaMDA is unlikely to be conscious, he additionally poses the question of "what grounds would a person have for being sure about it?" One would have to have access to unpublished information about LaMDA's architecture, and also would have to understand how consciousness works, and then figure out how to map the philosophy onto the machine: "(In the absence of these steps), it seems like one should be maybe a little bit uncertain. [...] there could well be other systems now, or in the relatively near future, that would start to satisfy the criteria." David Chalmers argued in 2023 that LLMs today display impressive conversational and general intelligence abilities, but are likely not conscious yet, as they lack some features that may be necessary, such as recurrent processing, a global workspace, and unified agency. Nonetheless, he considers that non-biological systems can be conscious, and suggested that future, extended models (LLM+s) incorporating these elements might eventually meet the criteria for consciousness, raising both profound scientific questions and significant ethical challenges. However, the view that consciousness can exist without biological phenomena is controversial and some reject it. Kristina Šekrst cautions that anthropomorphic terms such as "hallucination" can obscure important ontological differences between artificial and human cognition. While LLMs may produce human-like outputs, she argues that it does not justify ascribing mental states or consciousness to them. Instead, she advocates for an epistemological framework (such as reliabilism) that recognizes the distinct nature of AI knowledge production. She suggests that apparent understanding in LLMs may be a sophisticated form of AI hallucination. She also questions what would happen if an LLM were trained without any mention of consciousness. === Testing === Sentience is an inherently first-person phenomenon. Because of that, and due to the lack of an empirical definition of sentience, directly measuring it may be impossible. Although systems may display numerous behaviors correlated with sentience, determining whether a system is sentient is known as the hard pr

    Read more →
  • AdBlock

    AdBlock

    AdBlock is an ad-blocking browser extension for Google Chrome, Apple Safari (desktop and mobile), Firefox, Samsung Internet, Microsoft Edge and Opera. AdBlock allows users to prevent page elements, such as advertisements, from being displayed. It is free to download and use, and it includes optional donations to the developers. The AdBlock extension was created on December 8, 2009, which is the day that supports for extensions was added to Google Chrome. It was one of the first Google Chrome extensions that was made. Since 2016, AdBlock has been based on the Adblock Plus source code. In July 2018, AdBlock acquired uBlock, a commercial ad-blocker owned by uBlock LLC and based on uBlock Origin. In April 2021, eyeo GmbH (developer of Adblock Plus) announced its purchase of AdBlock, Inc (formerly BetaFish, Inc). == Crowdfunding == Gundlach launched a crowdfunding campaign on Crowdtilt in August 2013 in order to fund an ad campaign to raise awareness of ad-blocking and to rent a billboard at Times Square. After the one-month campaign, it raised $55,000. == Sales and acceptable ads == AdBlock was sold to an anonymous buyer in 2015 and on October 15, 2015, Gundlach's name was taken down from the site. In the terms of the deal, the original developer Michael Gundlach left operations to Adblock's continuing director, Gabriel Cubbage, and as of October 2, 2015, AdBlock began participating in the Acceptable Ads program. Acceptable Ads identifies "non-annoying" ads, which AdBlock shows by default. The intent is to allow non-invasive advertising, to either maintain support for websites that rely on advertising as a main source of revenue or for websites that have an agreement with the program. == Filters == AdBlock uses EasyList, the same filter syntax as Adblock Plus for Firefox, and natively supports the use of a number of filter lists. == Partnership with Amnesty International == On March 12, 2016, in support of World Day Against Cyber Censorship, and in partnership with Amnesty International, instead of blocking ads, AdBlock replaced ads with banners linked to articles on Amnesty's website, written by prominent free speech advocates such as Edward Snowden, to raise awareness of government-imposed online censorship and digital privacy issues around the world. The campaign was met with both praise and criticism, with AdBlock's CEO, Gabriel Cubbage, defending the decision in an essay on AdBlock's website, saying "We’re showing you Amnesty banners, just for today, because we believe users should be part of the conversation about online privacy. Tomorrow, those spaces will be vacant again. But take a moment to consider that in an increasingly information-driven world, when your right to digital privacy is threatened, so is your right to free expression." Meanwhile, Simon Sharwood of The Register characterized Cubbage's position as "'You should control your computer except when we feel political', says AdBlock CEO". == AdBlock for Firefox == On September 13, 2014, the AdBlock team released a version for Firefox users, ported from the code for Google Chrome, released under the same free software license as the original Adblock. The extension was removed on April 2, 2015, by an administrator on Mozilla Add-ons. On December 7, 2015, the official AdBlock site's knowledge base article stated that with version 44 or higher of Firefox desktop and Firefox Mobile, AdBlock will not be supported. The last version of Adblock for those platforms will work on older versions of Firefox. AdBlock was released again on Mozilla Add-ons on November 17, 2016. On April 1, 2012, Adblock developer Michael Gundlach tweaked the code to display LOLcats instead of simply blocking ads. Initially developed as a short-lived April Fools joke, the response was so positive that CatBlock was continued to be offered as an optional add-on supported by a monthly subscription. On October 23, 2014, the developer decided to end official support for CatBlock, and made it open-source, under GPLv3 licensing, as the original extension.

    Read more →
  • Automated storage and retrieval system

    Automated storage and retrieval system

    An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie

    Read more →
  • VoxForge

    VoxForge

    VoxForge is a free speech corpus and acoustic model repository for open source speech recognition engines. VoxForge was set up to collect transcribed speech to create a free GPL speech corpus in order to be uses with open source speech recognition engines. The speech audio files will be 'compiled' into acoustic models for use with open source speech recognition engines such as Julius, ISIP, and Sphinx and HTK (note: HTK has distribution restrictions). VoxForge has used LibriVox as a source of audio data since 2007.

    Read more →
  • User-defined function

    User-defined function

    A user-defined function (UDF) is a function provided by the user of a program or environment, in a context where the usual assumption is that functions are built into the program or environment. UDFs are usually written for the requirement of its creator. == BASIC language == In some old implementations of the BASIC programming language, user-defined functions are defined using the "DEF FN" syntax. More modern dialects of BASIC are influenced by the structured programming paradigm, where most or all of the code is written as user-defined functions or procedures, and the concept becomes practically redundant. == COBOL language == In the COBOL programming language, a user-defined function is an entity that is defined by the user by specifying a FUNCTION-ID paragraph. A user-defined function must return a value by specifying the RETURNING phrase of the procedure division header and they are invoked using the function-identifier syntax. See the ISO/IEC 1989:2014 Programming Language COBOL standard for details. As of May 2022, the IBM Enterprise COBOL for z/OS 6.4 (IBM COBOL) compiler contains support for user-defined functions. == Databases == In relational database management systems, a user-defined function provides a mechanism for extending the functionality of the database server by adding a function, that can be evaluated in standard query language (usually SQL) statements. The SQL standard distinguishes between scalar and table functions. A scalar function returns only a single value (or NULL), whereas a table function returns a (relational) table comprising zero or more rows, each row with one or more columns. User-defined functions in SQL are declared using the CREATE FUNCTION statement. For example, a user-defined function that converts Celsius to Fahrenheit (a temperature scale used in USA) might be declared like this: Once created, a user-defined function may be used in expressions in SQL statements. For example, it can be invoked where most other intrinsic functions are allowed. This also includes SELECT statements, where the function can be used against data stored in tables in the database. Conceptually, the function is evaluated once per row in such usage. For example, assume a table named Elements, with a row for each known chemical element. The table has a column named BoilingPoint for the boiling point of that element, in Celsius. The query would retrieve the name and the boiling point from each row. It invokes the CtoF user-defined function as declared above in order to convert the value in the column to a value in Fahrenheit. Each user-defined function carries certain properties or characteristics. The SQL standard defines the following properties: Language - defines the programming language in which the user-defined function is implemented; examples include SQL, C, C# and Java. Parameter style - defines the conventions that are used to pass the function parameters and results between the implementation of the function and the database system (only applicable if language is not SQL). Specific name - a name for the function that is unique within the database. Note that the function name does not have to be unique, considering overloaded functions. Some SQL implementations require that function names are unique within a database, and overloaded functions are not allowed. Determinism - specifies whether the function is deterministic or not. The determinism characteristic has an influence on the query optimizer when compiling a SQL statement. SQL-data access - tells the database management system whether the function contains no SQL statements (NO SQL), contains SQL statements but does not access any tables or views (CONTAINS SQL), reads data from tables or views (READS SQL DATA), or actually modifies data in the database (MODIFIES SQL DATA). User-defined functions should not be confused with stored procedures. Stored procedures allow the user to group a set of SQL commands. A procedure can accept parameters and execute its SQL statements depending on those parameters. A procedure is not an expression and, thus, cannot be used like user-defined functions. Some database management systems allow the creation of user defined functions in languages other than SQL. Microsoft SQL Server, for example, allows the user to use .NET languages including C# for this purpose. DB2 and Oracle support user-defined functions written in C or Java programming languages. === SQL Server 2000 === There are three types of UDF in Microsoft SQL Server 2000: scalar functions, inline table-valued functions, and multistatement table-valued functions. Scalar functions return a single data value (not a table) with RETURNS clause. Scalar functions can use all scalar data types, with exception of timestamp and user-defined data types. Inline table-valued functions return the result set of a single SELECT statement. Multistatement table-valued functions return a table, which was built with many TRANSACT-SQL statements. User-defined functions can be invoked from a query like built‑in functions such as OBJECT_ID, LEN, DATEDIFF, or can be executed through an EXECUTE statement like stored procedures. Performance Notes: User-defined functions are subroutines made of one or more Transact-SQL statements that can be used to encapsulate code for reuse. It takes zero or more arguments and evaluates a return value. Has both control-flow and DML statements in its body similar to stored procedures. Does not allow changes to any Global Session State, like modifications to database or external resource, such as a file or network. Does not support output parameter. DEFAULT keyword must be specified to pass the default value of parameter. Errors in UDF cause UDF to abort which, in turn, aborts the statement that invoked the UDF. === Apache Hive === Apache Hive defines, in addition to the regular user-defined functions (UDF), also user-defined aggregate functions (UDAF) and table-generating functions (UDTF). Hive enables developers to create their own custom functions with Java. === Apache Doris === Apache Doris, an open-source real-time analytical database, allows external users to contribute their own UDFs written in C++ to it.

    Read more →
  • Quantum image processing

    Quantum image processing

    Quantum image processing (QIMP) is using quantum computing or quantum information processing to create and work with quantum images. Due to some of the properties inherent to quantum computation, notably entanglement and parallelism, it is hoped that QIMP technologies will offer capabilities and performances that surpass their traditional equivalents, in terms of computing speed, security, and minimum storage requirements. == Background == A. Y. Vlasov's work in 1997 focused on using a quantum system to recognize orthogonal images. This was followed by efforts using quantum algorithms to search specific patterns in binary images and detect the posture of certain targets. Notably, more optics-based interpretations for quantum imaging were initially experimentally demonstrated in and formalized in after seven years. In 2003, Salvador Venegas-Andraca and S. Bose presented Qubit Lattice, the first published general model for storing, processing and retrieving images using quantum systems. Later on, in 2005, Latorre proposed another kind of representation, called the Real Ket, whose purpose was to encode quantum images as a basis for further applications in QIMP. Furthermore, in 2010 Venegas-Andraca and Ball presented a method for storing and retrieving binary geometrical shapes in quantum mechanical systems in which it is shown that maximally entangled qubits can be used to reconstruct images without using any additional information. Technically, these pioneering efforts with the subsequent studies related to them can be classified into three main groups: Quantum-assisted digital image processing (QDIP): These applications aim at improving digital or classical image processing tasks and applications. Optics-based quantum imaging (OQI) Classically inspired quantum image processing (QIMP) A survey of quantum image representation has been published in. Furthermore, the recently published book Quantum Image Processing provides a comprehensive introduction to quantum image processing, which focuses on extending conventional image processing tasks to the quantum computing frameworks. It summarizes the available quantum image representations and their operations, reviews the possible quantum image applications and their implementation, and discusses the open questions and future development trends. == Quantum image representations == There are various approaches for quantum image representation, that are usually based on the encoding of color information. A common representation is FRQI (Flexible Representation for Quantum Images), that captures the color and position at every pixel of the image, and defined as: | I ⟩ = 1 2 n ∑ i = 0 2 2 n − 1 | c i ⟩ ⊗ | i ⟩ {\displaystyle \vert I\rangle ={\frac {1}{2^{n}}}\sum _{i=0}^{2^{2n-1}}\vert c_{i}\rangle \otimes \vert i\rangle } where | i ⟩ {\textstyle |i\rangle } is the position and | c i ⟩ = c o s θ i | 0 ⟩ + s i n θ i | 1 ⟩ {\textstyle \vert c_{i}\rangle =cos\theta _{i}\vert 0\rangle +sin\theta _{i}\vert 1\rangle } the color with a vector of angles θ i ∈ [ 0 , π / 2 ] {\textstyle \theta _{i}\in \left[0,\pi /2\right]} . As it can be seen, | c i ⟩ {\textstyle \vert c_{i}\rangle } is a regular qubit state of the form | ψ ⟩ = α | 0 ⟩ + β | 1 ⟩ {\displaystyle \vert \psi \rangle =\alpha \vert 0\rangle +\beta \vert 1\rangle } , with basis states | 0 ⟩ = ( 1 0 ) {\textstyle \vert 0\rangle ={\begin{pmatrix}1\\0\end{pmatrix}}} and | 1 ⟩ = ( 0 1 ) {\textstyle \vert 1\rangle ={\begin{pmatrix}0\\1\end{pmatrix}}} , as well as amplitudes α {\textstyle \alpha } and β {\textstyle \beta } that satisfy | α | 2 + | β | 2 = 1 {\textstyle \left|\alpha \right|^{2}+\left|\beta \right|^{2}=1} . Another common representation is MCQI (Multi-Channel Representation for Quantum Images), that uses the RGB channels with quantum states and following FRQI definition: | I ⟩ = 1 2 n + 1 ∑ i = 0 2 2 n − 1 | C R G B i ⟩ ⊗ | i ⟩ {\displaystyle \vert I\rangle ={\frac {1}{2^{n+1}}}\sum _{i=0}^{2^{2n-1}}\vert C_{RGB}^{i}\rangle \otimes \vert i\rangle } | C R G B i ⟩ = cos ⁡ θ R i | 000 ⟩ + cos ⁡ θ G i | 001 ⟩ + cos ⁡ θ B i | 010 ⟩ + sin ⁡ θ R i | 100 ⟩ + sin ⁡ θ G i | 101 ⟩ + sin ⁡ θ B i | 110 ⟩ + cos ⁡ θ α | 011 ⟩ + sin ⁡ θ α | 111 ⟩ {\displaystyle {\begin{aligned}{\begin{aligned}\vert C_{RGB}^{i}\rangle &={\cos \theta _{R}^{i}\vert 000\rangle }+{\cos \theta _{G}^{i}\vert 001\rangle }+{\cos \theta _{B}^{i}\vert 010\rangle }\\&\quad +{\sin \theta _{R}^{i}\vert 100\rangle }+{\sin \theta _{G}^{i}\vert 101\rangle }+{\sin \theta _{B}^{i}\vert 110\rangle }\\&\quad +{\cos {\theta _{\alpha }}\vert 011\rangle }+{\sin \theta _{\alpha }\vert 111\rangle }\end{aligned}}\end{aligned}}} Departing from the angle-based approach of FRQI and MCQI, and using a qubit sequence, NEQR (Novel Enhanced Representation for Quantum Images) is another representation approach, that uses a function f ( y , x ) = C y x q − 1 C y x q − 2 … C y x 1 C y x 0 {\textstyle f\left(y,x\right)=C_{yx}^{q-1}C_{yx}^{q-2}\ldots C_{yx}^{1}C_{yx}^{0}} to encode color values for a 2 n × 2 n {\displaystyle 2^{n}\times 2^{n}} image: | I ⟩ = 1 2 n ∑ y = 0 2 n − 1 ∑ x = 0 2 n − 1 | f ( y , x ) ⟩ | y x ⟩ {\displaystyle \vert I\rangle ={\frac {1}{2^{n}}}\sum _{y=0}^{2^{n}-1}\sum _{x=0}^{2^{n}-1}\vert f\left(y,x\right)\rangle \vert yx\rangle } == Quantum image manipulations == A lot of the effort in QIMP has been focused on designing algorithms to manipulate the position and color information encoded using flexible representation of quantum images (FRQI) and its many variants. For instance, FRQI-based fast geometric transformations including (two-point) swapping, flip, (orthogonal) rotations and restricted geometric transformations to constrain these operations to a specified area of an image were initially proposed. Recently, NEQR-based quantum image translation to map the position of each picture element in an input image into a new position in an output image and quantum image scaling to resize a quantum image were discussed. While FRQI-based general form of color transformations were first proposed by means of the single qubit gates such as X, Z, and H gates. Later, Multi-Channel Quantum Image-based channel of interest (CoI) operator to entail shifting the grayscale value of the preselected color channel and the channel swapping (CS) operator to swap the grayscale values between two channels have been fully discussed. To illustrate the feasibility and capability of QIMP algorithms and application, researchers always prefer to simulate the digital image processing tasks on the basis of the QIRs that we already have. By using the basic quantum gates and the aforementioned operations, so far, researchers have contributed to quantum image feature extraction, quantum image segmentation, quantum image morphology, quantum image comparison, quantum image filtering, quantum image classification, quantum image stabilization, among others. In particular, QIMP-based security technologies have attracted extensive interest of researchers as presented in the ensuing discussions. Similarly, these advancements have led to many applications in the areas of watermarking, encryption, and steganography etc., which form the core security technologies highlighted in this area. In general, the work pursued by the researchers in this area are focused on expanding the applicability of QIMP to realize more classical-like digital image processing algorithms; propose technologies to physically realize the QIMP hardware; or simply to note the likely challenges that could impede the realization of some QIMP protocols. == Quantum image transform == By encoding and processing the image information in quantum-mechanical systems, a framework of quantum image processing is presented, where a pure quantum state encodes the image information: to encode the pixel values in the probability amplitudes and the pixel positions in the computational basis states. Given an image F = ( F i , j ) M × L {\displaystyle F=(F_{i,j})_{M\times L}} , where F i , j {\displaystyle F_{i,j}} represents the pixel value at position ( i , j ) {\displaystyle (i,j)} with i = 1 , … , M {\displaystyle i=1,\dots ,M} and j = 1 , … , L {\displaystyle j=1,\dots ,L} , a vector f → {\displaystyle {\vec {f}}} with M L {\displaystyle ML} elements can be formed by letting the first M {\displaystyle M} elements of f → {\displaystyle {\vec {f}}} be the first column of F {\displaystyle F} , the next M {\displaystyle M} elements the second column, etc. A large class of image operations is linear, e.g., unitary transformations, convolutions, and linear filtering. In the quantum computing, the linear transformation can be represented as | g ⟩ = U ^ | f ⟩ {\displaystyle |g\rangle ={\hat {U}}|f\rangle } with the input image state | f ⟩ {\displaystyle |f\rangle } and the output image state | g ⟩ {\displaystyle |g\rangle } . A unitary transformation can be implemented as a unitary evolution. Some basic and commonly used image transforms (e.g., the Fourier, Hadamard, an

    Read more →
  • Automated dispensing cabinet

    Automated dispensing cabinet

    An automated dispensing cabinet (ADC), also called a unit-based cabinet (UBC), automated dispensing device (ADD), or automated dispensing machine (ADM)[1], is a computerized medicine cabinet for hospitals and healthcare settings. ADCs allow medications to be stored and dispensed near the point of care while controlling and tracking drug distribution. == Overview == Hospital pharmacies have provided medications for patients by filling patient-specific cassettes of unit-dose medications that were then delivered to the nursing unit and stored in medication cabinets or carts. ADCs, originally designed for hospital use, were introduced in hospitals in the 1980s and have facilitated the transition to alternative delivery models and more decentralized medication distribution systems.[2] Implementing automated dispensing cabinets as part of a decentralized or hybrid medication distribution system can improve patient safety and the accountability of the inventory, streamline certain billing processes. However, in the 2000s, the technology began to be deployed into other care settings where medication doses were stored onsite, and higher security methods were needed to control inventory, access, and dispensing of each patient dose. Settings that now deploy ADCs include long-term care facilities, hospice, critical access hospitals, surgery centers, group homes, residential care facilities, rehab and psych environments, animal health, dental clinics, and nursing education simulation. These diverse care settings share a common need to safely store, account for, and dispense individual doses of medications, especially narcotics and high-value medications, at the point of care.[3] ADCs track user access and dispensed medications, and their use can improve control over medication inventory. The real-time inventory reports generated by many cabinets can simplify the filling process and help the pharmacy track expired drugs. Furthermore, by restricting individual drugs – such as high-risk medications and controlled substances – to unique drawers within the cabinet, overall inventory management, patient safety, and medication security can be improved. Automated dispensing cabinets allow the pharmacy department to profile physician orders before they are dispensed.[4] ADCs can also enable providers to record medication charges upon dispensing, reducing the billing paperwork the pharmacy is responsible for. In addition, nurses can note returned medications using the cabinets' computers, enabling direct credits to patients' accounts. Since automated cabinets can be located on the nursing unit floor, nursing have speedier access to a patient's medications. Also, shorter waiting time ensures improved patient comfort and care.[5] == Role of automated dispensing in healthcare == Automated dispensing is a pharmacy practice in which a device dispenses medications and fills prescriptions. ADCs, which can handle many different medications, are available from a number of manufacturers such as BD, ARxIUM, and Omnicell. Though members of the pharmacy community have been utilizing automation technology since the 1980s, companies are constantly improving ADCs to meet changing needs and health standards in the industry. Several goals can be met by implementing an automated product in a healthcare facility. Patient safety can be ensured with the use of ADC technology such as barcoding. Anesthesia ADCs in operating rooms and perioperative areas may include label printing to prevent mix-ups such as errors between morphine and hydromorphone, two different opioid analgesics that frequently get confused. These systems also communicate with the pharmacy and its information management system to track medications removed and support inventory replenishment. == Key features == ADCs are like automated teller machines whose specific technologies such as barcode scanning and clinical decision support can improve medication safety. Some have metal locking drawers for added security and some have automated single-dose dispensing to prevent the need for a blind count each time a controlled substance is accessed. Over the years, ADCs have been adapted to facilitate compliance with emerging regulatory requirements such as pharmacy review of medication orders and safe practice recommendations. ADCs incorporate advanced software and electronic interfaces to synthesize high-risk steps in the medication use process. These unit-based medication repositories provide computer-controlled storage, dispensation, tracking, and documentation of medication distribution in the resident care unit. Since automated dispensing cabinets are not located in the pharmacy, they are considered "decentralized" medication distribution systems. Instead, they can be found at the point of care on the resident care unit. Tracking of the stocking and distribution process can occur by interfacing the unit with a central pharmacy computer. These cabinets can also be interfaced with other external databases such as resident profiles, the facility's admission/discharge/transfer system, and billing systems. Most ADC providers offer scalable systems since several important factors vary widely by facility such as budget, physical room size, patient population/demographics, type of healthcare facility, etc.

    Read more →
  • Time-compressed speech

    Time-compressed speech

    Time-compressed speech refers to an audio recording of verbal text in which the text is presented in a much shorter time interval than it would through normally-paced real time speech. The basic purpose is to make recorded speech contain more words in a given time, yet still be understandable. For example: a paragraph that might normally be expected to take 20 seconds to read, might instead be presented in 15 seconds, which would represent a time-compression of 25% (5 seconds out of 20). The term "time-compressed speech" should not be confused with "speech compression", which controls the volume range of a sound, but does not alter its time envelope. == Methods == While some voice talents are capable of speaking at rates significantly in excess of general norms, the term "time-compressed speech" most usually refers to examples in which the time-reduction has been accomplished through some form of electronic processing of the recorded speech. In general, recorded speech can be electronically time-compressed by: increasing its speed (linear compression); removing silences (selective editing); a combination of the two (non-linear compression). The speed of a recording can be increased, which will cause the material to be presented at a faster rate (and hence in a shorter amount of time), but this has the undesirable side-effect of increasing the frequency of the whole passage, raising the pitch of the voices, which can reduce intelligibility. There are normally silences between words and sentences, and even small silences within certain words, both of which can be reduced or removed ("edited-out") which will also reduce the amount of time occupied by the full speech recording. However, this can also have the effect of removing verbal "punctuation" from the speech, causing words and sentences to run together unnaturally, again reducing intelligibility. Vowels are typically held a minimum of 20 milliseconds, over many cycles of the fundamental pitch. DSP systems can detect the beginning and end of each cycle and then skip over some fraction of those cycles, causing the material to be presented at a faster rate, without changing the pitch, maintaining a "normal" tone of voice. The current preferred method of time-compression is called "non-linear compression", which employs a combination of selectively removing silences; speeding up the speech to make the reduced silences sound normally-proportioned to the text; and finally applying various data algorithms to bring the speech back down to the proper pitch. This produces a more acceptable result than either of the two earlier techniques; however, if unrestrained, removing the silences and increasing the speed can make a selection of speech sound more insistent, possibly to the point of unpleasantness. == Applications == === Advertising === Time-compressed speech is frequently used in television and radio advertising. The advantage of time-compressed speech is that the same number of words can be compressed into a smaller amount of time, reducing advertising costs, and/or allowing more information to be included in a given radio or TV advertisement. It is usually most noticeable in the information-dense caveats and disclaimers presented (usually by legal requirement) at the end of commercials—the aural equivalent of the "fine print" in a printed contract. This practice, however, is not new: before electronic methods were developed, spokespeople who could talk extremely quickly and still be understood were widely used as voice talents for radio and TV advertisements, and especially for recording such disclaimers. === Education === Time-compressed speech has educational applications such as increasing the information density of trainings, and as a study aid. A number of studies have demonstrated that the average person is capable of relatively easily comprehending speech delivered at higher-than-normal rates, with the peak occurring at around 25% compression (that is, 25% faster than normal); this facility has been demonstrated in several languages. Conversational speech (in English) takes place at a rate of around 150 wpm (words per minute), but the average person is able to comprehend speech presented at rates of up to 200-250 wpm without undue difficulty. Blind and severely visually impaired subjects scored similar comprehension levels at even higher rates, up to 300-350 wpm. Blind people have been found to use time-compressed speech extensively, for example, when reviewing recorded lectures from high school and college classes, or professional trainings. Comprehension rates in older blind subjects have been found to be as good, or in some cases better than those found in younger sighted subjects. Other studies have determined that the ability to comprehend highly time-compressed speech tends to fall off with increased age, and is also reduced when the language of the time-compressed speech is not the listener's native language. Non-native speakers can, however, improve their comprehension level of time-compressed speech with multiday training. === Voice Mail === Voice mail systems have employed time-compressed speech since as far back as the 1970s. In this application, the technology enables the rapid review of messages in high-traffic systems, by a relatively small number of people. === Streaming Multimedia === Time-compressed speech has been explored as one of a variety of interrelated factors which may be manipulated to increase the efficiency of streaming multimedia presentations, by significantly reducing the latency times involved in the transfer of large digitally encoded media files.

    Read more →
  • Sequence labeling

    Sequence labeling

    In machine learning, sequence labeling is a type of pattern recognition task that involves the algorithmic assignment of a categorical label to each member of a sequence of observed values. A common example of a sequence labeling task is part of speech tagging, which seeks to assign a part of speech to each word in an input sentence or document. Sequence labeling can be treated as a set of independent classification tasks, one per member of the sequence. However, accuracy is generally improved by making the optimal label for a given element dependent on the choices of nearby elements, using special algorithms to choose the globally best set of labels for the entire sequence at once. As an example of why finding the globally best label sequence might produce better results than labeling one item at a time, consider the part-of-speech tagging task just described. Frequently, many words are members of multiple parts of speech, and the correct label of such a word can often be deduced from the correct label of the word to the immediate left or right. For example, the word "sets" can be either a noun or verb. In a phrase like "he sets the books down", the word "he" is unambiguously a pronoun, and "the" unambiguously a determiner, and using either of these labels, "sets" can be deduced to be a verb, since nouns very rarely follow pronouns and are less likely to precede determiners than verbs are. But in other cases, only one of the adjacent words is similarly helpful. In "he sets and then knocks over the table", only the word "he" to the left is helpful (cf. "...picks up the sets and then knocks over..."). Conversely, in "... and also sets the table" only the word "the" to the right is helpful (cf. "... and also sets of books were ..."). An algorithm that proceeds from left to right, labeling one word at a time, can only use the tags of left-adjacent words and might fail in the second example above; vice versa for an algorithm that proceeds from right to left. Most sequence labeling algorithms are probabilistic in nature, relying on statistical inference to find the best sequence. The most common statistical models in use for sequence labeling make a Markov assumption, i.e. that the choice of label for a particular word is directly dependent only on the immediately adjacent labels; hence the set of labels forms a Markov chain. This leads naturally to the hidden Markov model (HMM), one of the most common statistical models used for sequence labeling. Other common models in use are the maximum entropy Markov model and conditional random field.

    Read more →
  • Game Jolt

    Game Jolt

    Game Jolt is a social community platform for video games, gamers and content creators. Founded by Yaprak and David DeCarmine, it is available on iOS, Android, and on the web and as a desktop app for Windows and Linux. Users share interactive content through a variety of formats including images, videos, live streams, chat rooms, and virtual events. == Features == === Crowd streaming === In 2021 Game Jolt revealed their own live streaming feature called Firesides. Firesides allowed multiple users to simultaneously livestream together with nearly no delay. The feature launched with a virtual concert showcasing its ability to accommodate multiple streamers. On October 16, 2023, Firesides were removed from Game Jolt. === Mobile app === Game Jolt Social by Game Jolt Inc. launched on both the Apple App Store and Google Play Store in March 2022. "It's clear to us that Gen Z is tired of generic social media and they want a place specifically for gaming that supports all types of content they're creating–art, videos, thoughts, and livestreams all in one place." said Game Jolt founder and CEO Yaprak DeCarmine, in a statement to VentureBeat. === Game API === The Game Jolt Application Programming Interface (usually known as the Game Jolt Game API) allows any developer using a game development platform that supports HTTP operations and MD5 or SHA-1. Game Jolt advertises that the API can: Create multiple "scoreboards" which collect high scores from players made publicly available on the game's profile and give user accounts EXP Award player's trophies which give user accounts EXP Store game data on Game Jolt's data servers Log whether a user is currently playing a game they're logged into via the GJAPI == Game jams and competitions == Game Jolt regularly hosts game jams where participants are encouraged to develop games for a chance to win prizes. They hosted their first game jam in 2009, Shocking Contest. In November 2014, Game Jolt announced the "Indies vs PewDiePie" game jam, partnering with the popular YouTuber Felix "PewDiePie" Kjellberg. Developers were given a weekend (21–24 November) to create a game with the theme of "fun to play, fun to watch" to suit the Let's Plays entertainment style. Users could rate entries afterwards until December 1 when the scores were counted up. The prize to the top 10 rated games was Felix playing the games on his channel as a means of promotion for the developers, although later he played other entries. One of the participants of the jam, now known as Outerminds Inc. was discovered and hired by PewDiePie to develop his mobile game, Legend of the Brofist. Game Jolt partnered with Felix, Sean "Jacksepticeye" McLoughlin and Mark "Markiplier" Fischbach to host "Indies vs Gamers" in July 2015. The requirements for entries were arcade games using the Game Jolt Game API highscore tables, to be made between the July 17–20 and the top 5 games were played on the partner's YouTube channels. Following the "Indies vs PewDiePie" game jam in 2014, Game Jolt released their internal jam hosting tools public for all users to use as a service, to create their own game jams that integrated with the main site. Today, Game Jolt focuses on hosting and co-hosting game competitions with established brands in order to bring monetary and educational opportunities to their users. On April 15, 2024, an announcement was made about a collaboration with Pocket Worlds for the "HighRise Game Jam". Pocket Worlds had sold NFTs up until roughly 2022, causing a community outburst. The situation was addressed, and the situation started to disperse. == Contests == == Events == Game Jolt hosts both physical and virtual events to entertain and prank its users, which consists of the following: == History == Game Jolt has supported independent creators with a central platform to manage their content and communities since its start in 2003. David DeCarmine began development of Game Jolt at the age of 14 for a group of hobbyists, making games and sharing on forums in an early iteration known as Holo World. The original intention was to create a platform for gamers where new games could be discoverable and quickly playable, and where feedback could be provided directly to the creators, allowing them to continue improving their games. In 2008, Game Jolt was registered as an LLC, then incorporated as Game Jolt Inc. in September 2020. A new site launched in 2015 featuring a responsive design, automated curation for both games and game news articles which weighs how recent a game was uploaded and how popular it is ("hot") and filtering options on game listings for platform, maturity rating and development status. In March 2022, Game Jolt launched a mobile application simultaneously on the Google Play Store and Apple App Store targeted at Gen Z gamers and creators. While in beta, the mobile app had 100,000 installs pre-launch. === Game store === Game Jolt continues to host a large library of independent games. Game developers can upload their games directly to the site to share or sell. They would allow distribution for downloadable games, later adding support for Adobe Flash, Unity and Java games which allowed support for browser based games. In February 2013, Game Jolt built support for browser-based HTML5 games as well. A user levelling system was released into public beta in April 2013, incorporating the GJAPI trophies and highscores, as well as site activity, to generate 'EXP' (experience points). Game Jolt Jams released in early 2014 as a service to allow users to create their own game jams that integrated with the main site. In April 2016, an online marketplace was announced and released the following month with an exclusive set of game titles, including Bendy and the Ink Machine, allowing developers to sell their games on the site. In January 2016, Game Jolt released source code of the client and site's front end on GitHub under MIT license. In January 2022, Game Jolt banned adult games from appearing on the site, stating in an email to developers that the site had become a "social media platform" and they "had to make decisions around the direction and future of the brand which has now included the removal of hosted games with explicitly adult content." In response to a tweet by Itch.io saying the site is not for prudes, they wrote in their own tweet: "Game Jolt is a platform with a large audience of 13-16 year olds. Our users asked us to clean up, so here we are." == Investments == After bootstrapping Game Jolt with revenue earned from ads on the website for years, the DeCarmines secured venture capital in 2020 from SoftBank, doing so again in 2021 from founders of Twitch, Rec Room, Modio and more.

    Read more →
  • Pharmacy automation

    Pharmacy automation

    Pharmacy automation involves the mechanical processes of handling and distributing medications. Any pharmacy task may be involved, including counting small objects (e.g., tablets, capsules); measuring and mixing powders and liquids for compounding; tracking and updating customer information in databases (e.g., personally identifiable information (PII), medical history, drug interaction risk detection); and inventory management. This article focuses on the changes that have taken place in the local, or community pharmacy since the 1960s. == History == Dispensing medications in a community pharmacy before the 1970s was a time-consuming operation. The pharmacist dispensed prescriptions in tablet or capsule form with a simple tray and spatula. Many new medications were developed by pharmaceutical manufacturers at an ever-increasing pace, and medications prices were rising steeply. A typical community pharmacist was working longer hours and often forced to hire staff to handle increased workloads which resulted in less time to focus on safety issues. These additional factors led to use of a machine to count medications. The original electronic portable digital tablet counting technology was invented in Manchester, England between 1967 and 1970 by the brothers John and Frank Kirby. I had the original idea of how the machine would work and it was my patent, but it was a joint effort getting it to work in a saleable form. It was 3 years of very hard work. I had originally studied heavy electrical engineering before changing over to Medical School and qualifying as a Medical Doctor in 1968. In fact I was Senior House (Casualty) Officer (A&E or ER) in 1970 at North Manchester General Hospital when I filed the patent. I must have been the only hospital doctor in Britain with an oscilloscope, a soldering iron and a drawing board in his room in the Doctors' Residence. The housekeepers were bemused by all the wires. Frank originally trained as a Banker but quit to take a job with a local electronics firm during the development. He died in 1987, a terrible loss. [Extract from personal communication received in March 2010 from John Kirby.] Frank and John Kirby and their associate Rodney Lester were pioneers in pharmacy automation and small-object counting technology. In 1967, the Kirbys invented a portable digital tablet counter to count tablets and capsules. With Lester they formed a limited company. In 1970, their invention was patented and put into production in Oldham, England. The tablet counter aided the pharmacy industry with time-consuming manual counting of drug prescriptions. A counting machine consistently counted medications accurately and quickly. This aspect of pharmacy automation was quickly adopted, and innovations emerged every decade to aid the pharmacy industry to deliver medications quickly, safely, and economically. Modern pharmacies have many new options to improve their workflow by using the new technology, and can choose intelligently from the many options available. === Chronology === On 1 January 1971 commercial production of the first portable digital tablet counters in the World began. John Kirby had filed U.K. Patent number GB1358378(A) on 8 September 1970 and U.S. patent number 3789194 on 9 August 1971. These early electronic counters were designed to help pharmacies replace the common (but often inaccurate) practice of counting medications by hand. In 1975, the digital technology was exported to America. In early 1980 a dedicated research, development and production facility was built in Oldham, England at a cost of £500,000. Between 1982 and 1983, two separate development facilities had been created. In America, overseen by Rodney Lester; and in England, overseen by the Kirby brothers. In 1987, Frank Kirby died. In 1989, John Kirby moved his UK facility to Devon, England. A simple to operate machine had been developed to accurately and quickly count prescription medications. Technology improvements soon resulted in a more compact model. The price of such equipment in 1980 was around £1,300. This substantial investment in new technology was a major financial consideration, but the pharmacy community considered the use of a counting machine as a superior method compared to hand-counting medications. These early devices became known as tablet counter, capsule counter, pill counter, or drug counter. The new counting technology replaced manual methods in many industries such as, vitamin and diet supplement manufacturing. Technicians needed a small, affordable device to count and bottle medications. In England and America, the 1980s and 1990s saw new the development of high-speed machines for counting and bottle filling, Like their pharmacy-based counterparts, these industrial units were designed to be fast and simple to operate, yet remain small and cost effective. In America, in the late 1990s/early 2000s a new type of tablet counter appeared. It was simple to use, compact, inexpensive, and had good counting accuracy. At the turn of the millennium technical advances allowed the design of counters with a software verification system. With an onboard computer, displaying photo images of medications to assist the pharmacist or pharmacy technician to verify that the correct medication was being dispensed. In addition, a database for storing all prescriptions that were counted on the device. Between September 2005 and May 2007, American Capital made a major financial investment in Kirby Lester, which then relocated to a larger facility to expand its research and development capabilities. This move added extra space for product research and development facility (R&D). It allowed the opportunity to develop new advanced technology products that met the pharmacy's needs for simple, accurate, and cost-effective ways to dispense prescriptions safely. Pictured here is an early American type of integrated counter and packaging device. This machine was a third generation step in the evolution of pharmacy automated devices. Later models held pre-counted containers of commonly-prescribed medications. == Global variations == In the EU member states legislation was introduced in 1998 which had a major effect on UK Pharmacy operations. It effectively prohibited the use of tablet counters for counting and dispensing bulk packaged tablets. Both usage and sales of the machines in the UK declined rapidly as a result of the introduction of blister packaging for medicines. == Current state of the industry == A tablet counter has become a standard in more than 30,000 sites in 35 countries (as of 2010) (including many non-pharmacy sites, such as manufacturing facilities that use a counting machine as a check for small items). During the 1990s through 2012, numerous new pharmacy automation products came to market. During this timeframe, counting technologies, robotics, workflow management software, and interactive voice recognition (IVR) systems for retail (both chain and independent), outpatient, government, and closed-door pharmacies (mail order and central fill) were all introduced. Additionally, the concept of scalability - of migrating from an entry-level product to the next level of automation (e.g., counting technology to robotics) - was introduced and subsequently launched a new product line in 1997. Pharmacists everywhere are making the switch to automation for its increased speed, greater accuracy, and better security. As the industry evolves and customer expectations grow, automation is becoming less of a luxury and more of a necessity. Especially for independent pharmacies, automation is now a means of keeping up with the competition of large chain pharmacies. == Technological changes and design improvements == Constant developments in technology make the dispensing of prescription medications safer, more accurate and more efficient. In America, in 2008, "next-generation" counting and verification systems were introduced. Based on the counting technology employed in preceding models, later machines included the ability to help the pharmacy operate more effectively. Equipped with a new computer interface to a pharmacy management system, with workflow and inventory software. It also included "checks and balances" to ensure the technician and pharmacist were dispensing the correct medication for each patient. This is something that is important to keep reported correctly when dealing with controlled substances like narcotics. This was a step forward to verify all 100% of prescriptions that were dispensed by pharmacy staff. In America, in 2009, further advanced counters were designed that included the ability to dispense hands-free – a feature that many operators had desired. This allowed pharmacies to automate their most commonly dispensed medications via calibrated cassettes. Thirty of a pharmacy's common medications would now be dispensed automatically. Another new model doubled that throughput via an enclosed robotic mechanism. Robo

    Read more →
  • Tensor operator

    Tensor operator

    In pure and applied mathematics, quantum mechanics and computer graphics, a tensor operator generalizes the notion of operators which are scalars and vectors. A special class of these are spherical tensor operators which apply the notion of the spherical basis and spherical harmonics. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. The coordinate-free generalization of a tensor operator is known as a representation operator. == The general notion of scalar, vector, and tensor operators == In quantum mechanics, physical observables that are scalars, vectors, and tensors, must be represented by scalar, vector, and tensor operators, respectively. Whether something is a scalar, vector, or tensor depends on how it is viewed by two observers whose coordinate frames are related to each other by a rotation. Alternatively, one may ask how, for a single observer, a physical quantity transforms if the state of the system is rotated. Consider, for example, a system consisting of a molecule of mass M {\displaystyle M} , traveling with a definite center of mass momentum, p z ^ {\displaystyle p{\mathbf {\hat {z}} }} , in the z {\displaystyle z} direction. If we rotate the system by 90 ∘ {\displaystyle 90^{\circ }} about the y {\displaystyle y} axis, the momentum will change to p x ^ {\displaystyle p{\mathbf {\hat {x}} }} , which is in the x {\displaystyle x} direction. The center-of-mass kinetic energy of the molecule will, however, be unchanged at p 2 / 2 M {\displaystyle p^{2}/2M} . The kinetic energy is a scalar and the momentum is a vector, and these two quantities must be represented by a scalar and a vector operator, respectively. By the latter in particular, we mean an operator whose expected values in the initial and the rotated states are p z ^ {\displaystyle p{\mathbf {\hat {z}} }} and p x ^ {\displaystyle p{\mathbf {\hat {x}} }} . The kinetic energy on the other hand must be represented by a scalar operator, whose expected value must be the same in the initial and the rotated states. In the same way, tensor quantities must be represented by tensor operators. An example of a tensor quantity (of rank two) is the electrical quadrupole moment of the above molecule. Likewise, the octupole and hexadecapole moments would be tensors of rank three and four, respectively. Other examples of scalar operators are the total energy operator (more commonly called the Hamiltonian), the potential energy, and the dipole-dipole interaction energy of two atoms. Examples of vector operators are the momentum, the position, the orbital angular momentum, L {\displaystyle {\mathbf {L} }} , and the spin angular momentum, S {\displaystyle {\mathbf {S} }} . (Fine print: Angular momentum is a vector as far as rotations are concerned, but unlike position or momentum it does not change sign under space inversion, and when one wishes to provide this information, it is said to be a pseudovector.) Scalar, vector and tensor operators can also be formed by products of operators. For example, the scalar product L ⋅ S {\displaystyle {\mathbf {L} }\cdot {\mathbf {S} }} of the two vector operators, L {\displaystyle {\mathbf {L} }} and S {\displaystyle {\mathbf {S} }} , is a scalar operator, which figures prominently in discussions of the spin–orbit interaction. Similarly, the quadrupole moment tensor of our example molecule has the nine components Q i j = ∑ α q α ( 3 r α , i r α , j − r α 2 δ i j ) . {\displaystyle Q_{ij}=\sum _{\alpha }q_{\alpha }\left(3r_{\alpha ,i}r_{\alpha ,j}-r_{\alpha }^{2}\delta _{ij}\right).} Here, the indices i {\displaystyle i} and j {\displaystyle j} can independently take on the values 1, 2, and 3 (or x {\displaystyle x} , y {\displaystyle y} , and z {\displaystyle z} ) corresponding to the three Cartesian axes, the index α {\displaystyle \alpha } runs over all particles (electrons and nuclei) in the molecule, q α {\displaystyle q_{\alpha }} is the charge on particle α {\displaystyle \alpha } , and r α , i {\displaystyle r_{\alpha ,i}} is the i {\displaystyle i} -th component of the position of this particle. Each term in the sum is a tensor operator. In particular, the nine products r α , i r α , j {\displaystyle r_{\alpha ,i}r_{\alpha ,j}} together form a second rank tensor, formed by taking the outer product of the vector operator r α {\displaystyle {\mathbf {r} }_{\alpha }} with itself. == Rotations of quantum states == === Quantum rotation operator === The rotation operator about the unit vector n (defining the axis of rotation) through angle θ is U [ R ( θ , n ^ ) ] = exp ⁡ ( − i θ ℏ n ^ ⋅ J ) {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right)} where J = (Jx, Jy, Jz) are the rotation generators (also the angular momentum matrices): J x = ℏ 2 ( 0 1 0 1 0 1 0 1 0 ) J y = ℏ 2 ( 0 i 0 − i 0 i 0 − i 0 ) J z = ℏ ( − 1 0 0 0 0 0 0 0 1 ) {\displaystyle J_{x}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&1&0\\1&0&1\\0&1&0\end{pmatrix}}\,\quad J_{y}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&i&0\\-i&0&i\\0&-i&0\end{pmatrix}}\,\quad J_{z}=\hbar {\begin{pmatrix}-1&0&0\\0&0&0\\0&0&1\end{pmatrix}}} and let R ^ = R ^ ( θ , n ^ ) {\displaystyle {\widehat {R}}={\widehat {R}}(\theta ,{\hat {\mathbf {n} }})} be a rotation matrix. According to the Rodrigues' rotation formula, the rotation operator then amounts to U [ R ( θ , n ^ ) ] = 1 1 − i sin ⁡ θ ℏ n ^ ⋅ J − 1 − cos ⁡ θ ℏ 2 ( n ^ ⋅ J ) 2 . {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=1\!\!1-{\frac {i\sin \theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} -{\frac {1-\cos \theta }{\hbar ^{2}}}({\hat {\mathbf {n} }}\cdot \mathbf {J} )^{2}.} An operator Ω ^ {\displaystyle {\widehat {\Omega }}} is invariant under a unitary transformation U if Ω ^ = U † Ω ^ U ; {\displaystyle {\widehat {\Omega }}={U}^{\dagger }{\widehat {\Omega }}U;} in this case for the rotation U ^ ( R ) {\displaystyle {\widehat {U}}(R)} , Ω ^ = U ( R ) † Ω ^ U ( R ) = exp ⁡ ( i θ ℏ n ^ ⋅ J ) Ω ^ exp ⁡ ( − i θ ℏ n ^ ⋅ J ) . {\displaystyle {\widehat {\Omega }}={U(R)}^{\dagger }{\widehat {\Omega }}U(R)=\exp \left({\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right){\widehat {\Omega }}\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right).} === Angular momentum eigenkets === The orthonormal basis set for total angular momentum is | j , m ⟩ {\displaystyle |j,m\rangle } , where j is the total angular momentum quantum number and m is the magnetic angular momentum quantum number, which takes values −j, −j + 1, ..., j − 1, j. A general state within the j subspace | ψ ⟩ = ∑ m c j m | j , m ⟩ {\displaystyle |\psi \rangle =\sum _{m}c_{jm}|j,m\rangle } rotates to a new state by: | ψ ¯ ⟩ = U ( R ) | ψ ⟩ = ∑ m c j m U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =U(R)|\psi \rangle =\sum _{m}c_{jm}U(R)|j,m\rangle } Using the completeness condition: I = ∑ m ′ | j , m ′ ⟩ ⟨ j , m ′ | {\displaystyle I=\sum _{m'}|j,m'\rangle \langle j,m'|} we have | ψ ¯ ⟩ = I U ( R ) | ψ ⟩ = ∑ m m ′ c j m | j , m ′ ⟩ ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =IU(R)|\psi \rangle =\sum _{mm'}c_{jm}|j,m'\rangle \langle j,m'|U(R)|j,m\rangle } Introducing the Wigner D matrix elements: D ( R ) m ′ m ( j ) = ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle {D(R)}_{m'm}^{(j)}=\langle j,m'|U(R)|j,m\rangle } gives the matrix multiplication: | ψ ¯ ⟩ = ∑ m m ′ c j m D m ′ m ( j ) | j , m ′ ⟩ ⇒ | ψ ¯ ⟩ = D ( j ) | ψ ⟩ {\displaystyle |{\bar {\psi }}\rangle =\sum _{mm'}c_{jm}D_{m'm}^{(j)}|j,m'\rangle \quad \Rightarrow \quad |{\bar {\psi }}\rangle =D^{(j)}|\psi \rangle } For one basis ket: | j , m ¯ ⟩ = ∑ m ′ D ( R ) m ′ m ( j ) | j , m ′ ⟩ {\displaystyle |{\overline {j,m}}\rangle =\sum _{m'}{D(R)}_{m'm}^{(j)}|j,m'\rangle } For the case of orbital angular momentum, the eigenstates | ℓ , m ⟩ {\displaystyle |\ell ,m\rangle } of the orbital angular momentum operator L and solutions of Laplace's equation on a 3d sphere are spherical harmonics: Y ℓ m ( θ , ϕ ) = ⟨ θ , ϕ | ℓ , m ⟩ = ( 2 ℓ + 1 ) 4 π ( ℓ − m ) ! ( ℓ + m ) ! P ℓ m ( cos ⁡ θ ) e i m ϕ {\displaystyle Y_{\ell }^{m}(\theta ,\phi )=\langle \theta ,\phi |\ell ,m\rangle ={\sqrt {{(2\ell +1) \over 4\pi }{(\ell -m)! \over (\ell +m)!}}}\,P_{\ell }^{m}(\cos {\theta })\,e^{im\phi }} where Pℓm is an associated Legendre polynomial, ℓ is the orbital angular momentum quantum number, and m is the orbital magnetic quantum number which takes the values −ℓ, −ℓ + 1, ... ℓ − 1, ℓ The formalism of spherical harmonics have wide applications in applied mathematics, and are closely related to the formalism of spherical tensors, as shown below. Spherical harmonics are functions of the polar and azimuthal angles, ϕ and θ respectively, which can be conveniently collected into a unit vector n(θ, ϕ) pointing in the direction of those angles, in the Cartesian basis it is: n ^ ( θ , ϕ ) = cos ⁡ ϕ sin ⁡ θ e x + s

    Read more →
  • Autognostics

    Autognostics

    Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware. It is considered one of the major components of Autonomic Networking. == Introduction == One of the most important characteristics of today's Internet that has contributed to its success is its basic design principle: a simple and transparent core with intelligence at the edges (the so-called "end-to-end principle"). Based on this principle, the network carries data without knowing the characteristics of that data (e.g., voice, video, etc.) - only the end-points have application-specific knowledge. If something goes wrong with the data, only the edge may be able to recognize that since it knows about the application and what the expected behavior is. The core has no information about what should happen with that data - it only forwards packets. Although an effective and beneficial attribute, this design principle has also led to many of today's problems, limitations, and frustrations. Currently, it is almost impossible for most end-users to know why certain network-based applications do not work well and what they need to do to make it better. Also, network operators who interact with the core in low-level terms such as router configuration have problems expressing their high-level goals into low-level actions. In high-level terms, this may be summarized as a weak coupling between the network and application layers of the overall system. As a consequence of the Internet end-to-end principle, the network performance experienced by a particular application is difficult to attribute based on the behavior of the individual elements. At any given moment, the measure of performance between any two points is typically unknown and applications must operate blindly. As a further consequence, changes to the configuration of given element, or changes in the end-to-end path, cannot easily be validated. Optimization and provisioning cannot then be automated except against only the simplest design specifications. There is an increasing interest in Autonomic Networking research, and a strong conviction that an evolution from the current networking status quo is necessary. Although to date there have not been any practical implementations demonstrating the benefits of an effective autonomic networking paradigm, there seems to be a consensus as to the characteristics which such implementations would need to demonstrate. These specifically include continuous monitoring, identifying, diagnosing and fixing problems based on high-level policies and objectives. Autognostics, as a major part of the autonomic networking concept, intends to bring networks to a new level of awareness and eliminate the lack of visibility which currently exists in today's networks. == Definition == Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware, in part and as a whole, and dynamically adapt to the applications running on them by autonomously monitoring, identifying, diagnosing, resolving issues, subsequently verifying that any remediation was successful, and reporting the impact with respect to the application's use (i.e., providing visibility into the changes to networks and their effects). Although similar to the concept of network awareness, i.e., the capability of network devices and applications to be aware of network characteristics (see References section below), it is noteworthy that autognostics takes that concept one step further. The main difference is the auto part of autognostics, which entails that network devices are self-aware of network characteristics, and have the capability to adapt themselves as a result of continuous monitoring and diagnostics. == Path to autognostics == Autognostics, or in other words deep self-knowledge, can be best described as the ability of a network to know itself and the applications that run on it. This knowledge is used to autonomously adapt to dynamic network and application conditions such as utilization, capacity, quality of service/application/user experience, etc. In order to achieve autognosis, networks need a means to: Continuously monitor/test the network for application-specific performance Analyze the monitoring/test data to detect problems (e.g., performance degradation) Diagnose, identify and localize sources of degradation Automatically take actions to resolve problems via remediation/provisioning Verify the problems have been resolved (potentially rolling back changes if ineffective) Subsequently, continue to monitor/test for performance

    Read more →
  • Voice search

    Voice search

    Voice search, also called voice-enabled search, allows the user to use a voice to search the Internet, a website, or an app. In a broader definition, voice search includes open-domain keyword query on any information on the Internet, for example in Google Voice Search, Cortana, Siri and Amazon Echo. Voice search is often interactive, involving several rounds of interaction that allows a system to ask for clarification. Voice search is a type of dialog system. Voice search is not a replacement for typed search. Rather the search terms, experience and use cases can differ heavily depending on the input type. == Supported language == Language is the most essential factor for a system to understand, and provide the most accurate results of what the user searches. This covers across languages, dialects, and accents, as users want a voice assistant that both understands them and speaks to them understandably. While spoken and written languages differ, voice search should support natural spoken language instead of only transforming voice into text and doing a regular text search with the help speech recognition. For example, in typed search an eCommerce user can easily copy and paste an alphanumeric product code to search field, but when speaking the search terms can be very different, such as "show me the new Bluetooth headphones by Samsung". == How it works == The difference between text and voice search is not only the input type. The mechanism must include an automatic speech recognition (ASR) for input, but it can also include natural language understanding for natural spoken search queries such as "What's the population for the United States" It can include text-to-speech (TTS) or a regular display for output modalities. Users might sometimes be required to activate the search by using a wake word. Then, the search system will detect the language spoken by the user. It will then detect the keywords and context of the sentence. Lastly, the device will return results depending on its output. A device with a screen might display the results, while a device without a screen will speak them back to the searcher.

    Read more →
  • BeeSafe

    BeeSafe

    BeeSafe is a personal safety mobile app launched in 2015 as a Slovak startup. It is a location-based security service that notifies family members and friends in case the user of the app gets in danger. The app has received numerous awards. The app has more than 700 downloads and 250 active logins from more than 60 countries worldwide. == History == BeeSafe was founded on March 20, 2015 by Peter Stražovec and Michal Kačerík. The project was a winner of Žilina’s Startup Weekend 2013 and a StartupAwards.SK 2015 finalist. Later on, the app was released in the Android and iOS marketplace. The whole BeeSafe project was in The Spot booster and incubator in Bratislava for three months. BeeSafe entered into an agreement with the city of Piešťany in November 2015 to increase the security of its citizen by connecting the mobile app with the police platform. It is the first city that started using the BeeSafe platform. Further on, the application tries to help people in other Slovak cities. The cities can see the users only if they are in danger. == Awards == BeeSafe app received the Via Bona award, it is a winner of a Slovak startup and has other nominations too.

    Read more →