AI Data Analyst Zalando

AI Data Analyst Zalando — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Auto-defrost

Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.
Read more →
Protocol Builder

Protocol Builder is a tool in programming languages to generate code to build protocols in a fast and reliable way. Network programming for all kinds of protocols (such as TCP, UDP, and SNMP) includes converting data to be transferred to raw bytes in the sending side and parsing these bytes in the receiving side. Protocol builders facilitate this stage, usually by automatically generating the code. Protocol Programming has many components to be developed, these are: server listener, server connection, client connection, packets, and loggers. Most protocol builders implement these components automatically so developers save time and money. Currently, there are two Protocol Builders in the market, one for C++ from UpRedSun which is for TCP and UDP protocols. The second one is for .Net languages which generates the code in C# for TCP Protocols, this tool is called .Net Protocol Builder.
Read more →
Software configuration management

Software configuration management (SCM), a.k.a. software change and configuration management (SCCM), is the software engineering practice of tracking and controlling changes to a software system. It is part of the larger cross-disciplinary field of configuration management (CM). SCM includes version control and the establishment of baselines. == Goals == The goals of SCM include: Configuration identification - Identifying configurations, configuration items and baselines. Configuration control - Implementing a controlled change process. This is usually achieved by setting up a change control board whose primary function is to approve or reject all change requests that are sent against any baseline. Configuration status accounting - Recording and reporting all the necessary information on the status of the development process. Configuration auditing - Ensuring that configurations contain all their intended parts and are sound with respect to their specifying documents, including requirements, architectural specifications and user manuals. Build management - Managing the process and tools used for builds. Process management - Ensuring adherence to the organization's development process. Environment management - Managing the software and hardware that host the system. Teamwork - Facilitate team interactions related to the process. Defect tracking - Making sure every defect has traceability back to the source. With the introduction of cloud computing and DevOps the purposes of SCM tools have become merged in some cases. The SCM tools themselves have become virtual appliances that can be instantiated as virtual machines and saved with state and version. The tools can model and manage cloud-based virtual resources, including virtual appliances, storage units, and software bundles. The roles and responsibilities of the actors have become merged as well with developers now being able to dynamically instantiate virtual servers and related resources. == History == == Examples == Ansible – Open-source software platform for remote configuring and managing computers CFEngine – Configuration management software Chef – Configuration management toolPages displaying short descriptions of redirect targets LCFG – Computer configuration management system NixOS – Linux distribution OpenMake Software – DevOps company Otter Puppet – Open source configuration management software Salt – Configuration management software Rex – Open source software
Read more →
Cloud-based quantum computing

Cloud-based quantum computing refers to the remote access of quantum computing resources—such as quantum emulators, simulators, or processors—via the internet. Cloud access enables users to develop, test, and execute quantum algorithms without the need for direct interaction with specialized hardware, facilitating broader participation in quantum software development and experimentation. In 2016, IBM launched the IBM Quantum Experience, one of the first publicly accessible quantum processors connected to the cloud. In early 2017, researchers at Rigetti Computing demonstrated programmable quantum cloud access through their software platform Forest, which included the pyQuil Python library. Since the early-2020s, cloud-based quantum computing has grown significantly, with multiple providers offering access to a variety of quantum hardware modalities, including superconducting qubits, trapped ions, neutral atoms, and photonic systems. Major platforms such as Amazon Braket, Azure Quantum, and qBraid aggregate quantum devices from hardware developers like IonQ, Rigetti Computing, QuEra, Pasqal, Oxford Quantum Circuits, and IBM Quantum. These platforms provide unified interfaces for users to write and execute quantum algorithms across diverse backends, often supporting open-source SDKs such as Qiskit, Cirq, and PennyLane. The proliferation of cloud-based access has played a key role in accelerating quantum education, algorithm research, and early-stage application development by lowering the barrier to experimentation with real quantum hardware. Cloud-based quantum computing has expanded access to quantum hardware and tools beyond traditional research laboratories. These platforms support educational initiatives, algorithm development, and early-stage commercial applications. == Applications == Cloud-based quantum computing is used across education, research, and software development, offering remote access to quantum systems without the need for on-site infrastructure. === Education === Quantum cloud platforms have become valuable tools in education, allowing students and instructors to engage with real quantum processors through user-friendly interfaces. Educators use these platforms to teach foundational concepts in quantum mechanics and quantum computing, as well as to demonstrate and implement quantum algorithms in a classroom or laboratory setting. === Scientific Research === Cloud-based access to quantum hardware has enabled researchers to conduct experiments in quantum information, test quantum algorithms, and compare quantum hardware platforms. Experiments such as testing Bell's theorem or evaluating quantum teleportation protocols have been performed on publicly available quantum processors. === Software Development and Prototyping === Developers use cloud-based platforms to prototype quantum software applications across fields such as optimization, machine learning, and chemistry. These platforms offer SDKs and APIs that integrate classical and quantum workflows, enabling experimentation with quantum algorithms in real-world or simulated environments. === Public Engagement and Games === Quantum cloud tools have also been used to create educational games and interactive applications aimed at increasing public understanding of quantum concepts. These efforts help bridge the gap between theoretical content and intuitive learning. == Existing platforms == qBraid Lab by qBraid is a cloud-based platform for quantum computing. It provides software tools for researchers and developers in quantum, as well as access to quantum hardware. qBraid provides cloud based access to Microsoft Azure Quantum and Amazon Braket devices including IQM, QuEra, Pasqal, Rigetti, IonQ, QIR simulators, Amazon Braket simulators, and the NEC Vector Annealer, as of August 2025. qBraid's base version is free, where unlimited hardware and simulator access is available with the purchase of credits. Quandela Cloud by Quandela is the platform to access first cloud-accessible European photonic quantum computer. The computer is interfaced using the Perceval scripting language, with tutorials and documentation available online for free. Xanadu Quantum Cloud by Xanadu is a platform with cloud-based access to three fully programmable photonic quantum computers. Forest by Rigetti Computing is a tool suite for cloud-based quantum computing. It includes a programming language, development tools and example algorithms. LIQUi> by Microsoft is a software architecture and tool suite for quantum computing. It includes a programming language, example optimization and scheduling algorithms, and quantum simulators. Q#, a quantum programming language by Microsoft on the .NET Framework seen as a successor to LIQUi|>. IBM Quantum Platform by IBM, providing access to quantum hardware as well as HPC simulators. These can be accessed programmatically using the Python-based Qiskit framework, or via graphical interface with the IBM Q Experience GUI. Both are based on the OpenQASM standard for representing quantum operations. There is also a tutorial and online community. Quantum in the Cloud by The University of Bristol, which consists of a quantum simulator and a four qubit optical quantum system. Quantum Playground by Google is an educational resource which features a simulator with a simple interface, and a scripting language and 3D quantum state visualization. Quantum in the Cloud is an experimental quantum cloud platform for access to a four-qubit nuclear magnetic resonance-NMRCloudQ computer, managed by Tsinghua University. Quantum Inspire by Qutech is the first platform in Europe providing cloud-based quantum computing to two hardware chips. Next to a 5-qubit transmon processor, Quantum Inspire is the first platform in the world to provide online access to a fully programmable 2-qubit electron spin quantum processor. Amazon Braket is a cloud-based quantum computing platform hosted by AWS which, as of June 2025, provides access to quantum computers built by IonQ, Rigetti, IQM, and QuEra. Braket also provides a quantum algorithm development environment and simulator. Forge by QC Ware is a cloud-based quantum computing platform that provides access to D-Wave hardware, as well as Google and IBM simulators. The platform offers a 30-day free trial, including one minute of quantum computing time. Quantum-as-a-Service by Scaleway is a cloud-based platform created in 2022 to access to real quantum hardware from IQM Quantum Computers, Alpine Quantum Technologies, Quandela and Pasqal. It also include access to GPU-powered emulators such as Aer, Qsim and Quandela proprietary emulation.
Read more →
Adversarial machine learning

Adversarial machine learning is the study of the attacks on machine learning algorithms, and of the defenses against such attacks. Machine learning techniques are mostly designed to work on specific problem sets, under the assumption that the training and test data are generated from the same statistical distribution (IID). However, this assumption is often violated in practical high-stake applications, where users may intentionally supply fabricated data that violates the statistical assumption. Most common attacks in adversarial machine learning include evasion attacks, data poisoning attacks, Byzantine attacks and model extraction. == History == At the MIT Spam Conference in January 2004, John Graham-Cumming showed that a machine-learning spam filter could be used to defeat another machine-learning spam filter by automatically learning which words to add to a spam email to get the email classified as not spam. In 2004, Nilesh Dalvi and others noted that linear classifiers used in spam filters could be defeated by simple "evasion attacks" as spammers inserted "good words" into their spam emails. (Around 2007, some spammers added random noise to fuzz words within "image spam" in order to defeat OCR-based filters.) In 2006, Marco Barreno and others published "Can Machine Learning Be Secure?", outlining a broad taxonomy of attacks. As late as 2013 many researchers continued to hope that non-linear classifiers (such as support vector machines and neural networks) might be robust to adversaries, until Battista Biggio and others demonstrated the first gradient-based attacks on such machine-learning models (2012–2013). In 2012, deep neural networks began to dominate computer vision problems; starting in 2014, Christian Szegedy and others demonstrated that deep neural networks could be fooled by adversaries, again using a gradient-based attack to craft adversarial perturbations. Further work would show that adversarial attacks are harder to produce in uncontrolled environments, due to the different environmental constraints that cancel out the effect of noise. For example, any small rotation or slight illumination on an adversarial image can destroy the adversariality. In addition, researchers such as Google Brain's Nick Frosst point out that it is much easier to make self-driving cars miss stop signs by physically removing the sign itself, rather than creating adversarial examples. Frosst also believes that the adversarial machine learning community incorrectly assumes models trained on a certain data distribution will also perform well on a completely different data distribution. He suggests that a new approach to machine learning should be explored, and is currently working on a unique neural network that has characteristics more similar to human perception than state-of-the-art approaches. While adversarial machine learning continues to be heavily rooted in academia, large tech companies such as Google, Microsoft, and IBM have begun curating documentation and open source code bases to allow others to concretely assess the robustness of machine learning models and minimize the risk of adversarial attacks. === Examples === Examples include attacks in spam filtering, where spam messages are obfuscated through the misspelling of "bad" words or the insertion of "good" words; attacks in computer security, such as obfuscating malware code within network packets or modifying the characteristics of a network flow to mislead intrusion detection; attacks in biometric recognition where fake biometric traits may be exploited to impersonate a legitimate user; or to compromise users' template galleries that adapt to updated traits over time. Researchers showed that by changing only one-pixel it was possible to fool deep learning algorithms. Others 3-D printed a toy turtle with a texture engineered to make Google's object detection AI classify it as a rifle regardless of the angle from which the turtle was viewed. Creating the turtle required only low-cost commercially available 3-D printing technology. A machine-tweaked image of a dog was shown to look like a cat to both computers and humans. A 2019 study reported that humans can guess how machines will classify adversarial images. Researchers discovered methods for perturbing the appearance of a stop sign such that an autonomous vehicle classified it as a merge or speed limit sign. A data poisoning filter called Nightshade was released in 2023 by researchers at the University of Chicago. It was created for use by visual artists to put on their artwork to corrupt the data set of text-to-image models, which usually scrape their data from the internet without the consent of the image creator. McAfee attacked Tesla's former Mobileye system, fooling it into driving 50 mph over the speed limit, simply by adding a two-inch strip of black tape to a speed limit sign. Adversarial patterns on glasses or clothing designed to deceive facial-recognition systems or license-plate readers, have led to a niche industry of "stealth streetwear". An adversarial attack on a neural network can allow an attacker to inject algorithms into the target system. Researchers can also create adversarial audio inputs to disguise commands to intelligent assistants in benign-seeming audio; a parallel literature explores human perception of such stimuli. Clustering algorithms are used in security applications. Malware and computer virus analysis aims to identify malware families, and to generate specific detection signatures. In the context of malware detection, researchers have proposed methods for adversarial malware generation that automatically craft binaries to evade learning-based detectors while preserving malicious functionality. Optimization-based attacks such as GAMMA use genetic algorithms to inject benign content (for example, padding or new PE sections) into Windows executables, framing evasion as a constrained optimization problem that balances misclassification success with the size of the injected payload and showing transferability to commercial antivirus products. Complementary work uses generative adversarial networks (GANs) to learn feature-space perturbations that cause malware to be classified as benign; Mal-LSGAN, for instance, replaces the standard GAN loss with a least-squares objective and modified activation functions to improve training stability and produce adversarial malware examples that substantially reduce true positive rates across multiple detectors. == Challenges in applying machine learning to security == Researchers have observed that the constraints under which machine-learning techniques function in the security domain are different from those of common benchmark domains. Security data may change over time, include mislabeled samples, or reflect adversarial behavior, which complicates evaluation and reproducibility. === Data collection issues === Security datasets vary across formats, including binaries, network traces, and log files. Studies have reported that the process of converting these sources into features can introduce bias or inconsistencies. In addition, time-based leakage can occur when related malware samples are not properly separated across training and testing splits, which may lead to overly optimistic results. === Labeling and ground truth challenges === Malware labels are often unstable because different antivirus engines may classify the same sample in conflicting ways. Ceschin et al. note that families may be renamed or reorganized over time, causing further discrepancies in ground truth and reducing the reliability of benchmarks. === Concept drift === Because malware creators continuously adapt their techniques, the statistical properties of malicious samples also change. This form of concept drift has been widely documented and may reduce model performance unless systems are updated regularly or incorporate mechanisms for incremental learning. === Feature robustness === Researchers differentiate between features that can be easily manipulated and those that are more resistant to modification. For example, simple static attributes, such as header fields, may be altered by attackers, while structural features, such as control-flow graphs, are generally more stable but computationally expensive to extract. === Class imbalance === In realistic deployment environments, the proportion of malicious samples can be extremely low, ranging from 0.01% to 2% of total data. This unbalanced distribution causes models to develop a bias towards the majority class, achieving high accuracy but failing to identify malicious samples. Prior approaches to this problem have included both data-level solutions and sequence-specific models. Methods like n-gram and Long Short-Term Memory (LSTM) networks can model sequential data, but their performance has been shown to decline significantly when malware samples are realistically proportioned in the training set, demonstrating the limitations in
Read more →
Supper (Spotify)

Supper is a web-based application on the Spotify digital music streaming platform. The Supper app was born from a group of friends who had backgrounds in the music and gastronomy industries. Digital music solutions company Artisan Council later executed it. The app now sits in the top 40 applications on Spotify. == About == The Supper Spotify application matches recipes for all occasions and skill levels with a playlist for both preparation and presentation, as envisioned by the chefs themselves. Supper is credited with being one of the first apps to pair music with food. Playing on the social nature of music and food culture, users can seamlessly experience both for the first time with real time music streaming. == Supper.mx == In May 2014 Supper was launched outside of the Spotify streaming platform. Though still in partnership with Spotify, supper.mx allows users to view Supper's music + food collaborations on mobile, tablet and desktop, without the need to download Spotify directly. == Curators == All of the recipes and playlists featured on the Supper app come straight from a growing network of tastemakers, including chefs, musicians and institutions around the world. Each month the recipes and playlists are updated in conjunction with current holidays, events and seasons. === Launch === Launching in October 2013 the first edition of Supper featured content from a range of eating institutions and culture makers from the US and Australia. Brooklyn Bowl (Brooklyn) Roberta's Pizza (Brooklyn) Fancy Hanks (Melbourne) The Foresters/Queenies Upstairs (Sydney) Hipstamatic Panama House (Bondi) Sweetwater Inn (Melbourne) Soul Clap (Syd record label) Yellow Birds (Melbourne) === November 2013 === Yardbird (Hong Kong) Sonoma Bakery (Sydney) Do or Dine (Brooklyn) Cameo Gallery (Brooklyn) Hypertrak (Blog) Blue Smoke (NYC) The Crepes of Wrath (Blog) Willin Low // Wild Rocket - Wild Oats - Relish === December 2013 === The Copper Mill (Sydney) Thug Kitchen Mamak (Sydney) Tutu's (Brooklyn) Chin Chin (Melbourne) Flat Iron Steak (London) Greasy Spoon (Copenhagen) === January 2014 === Mexicali Taco & Co. (LA) Church & State (LA) Salts Cure (LA) Nopa (SF) L & E Oyster (LA) 4100 bar (LA) Golden Gopher (LA) The Pie Hole (LA) State Bird Provisions (SF) === Momofuku === In February 2014 Supper teamed up with restaurant heavy weights Momofuku. The recipes featured came from their iconic New York, Toronto and Sydney restaurants. Head office also got involved with an instructional from Brand Director Sue Chan on how to paint Momofuku vibes on to any party. === SXSW === March sees the Supper team migrate to Austin, Texas for SXSW, bringing together the best eateries the city has to offer as well as the music that has influenced them. Restaurants and eateries on board in 2014 included: The Backspace Kelis Swifts Attic Uchi Jackalope Paul Qui/East Side King Thai Kun Wonderland Hole in the Wall Justine's Brasserie The Liberty === Kelis === In April 2014 Kelis presented 5 of her recipes paired with a personal playlist for Supper. Kelis shared her recipes for apple farro, jerk ribs, New York vanilla bean cheesecake and Jerk Ribs. The Kelis/Supper collaboration coincided with the release of Kelis' 2014 album titled 'Food'. === Roberta's Pizza === In May 2014 Bushwick's Roberta's Pizza was guest curator on the Supper app and website. Included in their selections were restaurants and bars from across New York including Bun-ker Vietnamese, Old Stanley's Bar, St. Anselm, Chuko, Frank's Cocktail Lounge, Junior's Cheesecake, Xi'an Famous Foods, Xe Lua, 124 Old Rabbit and Yuji Ramen.
Read more →
Private cloud computing infrastructure

Private cloud computing infrastructure is a category of cloud computing that provides comparable benefits to public cloud systems, such as self-service and scalability, but it does so via a proprietary framework. In contrast to public clouds, which cater to multiple entities, a private cloud is specifically designed for the requirements and objectives of one organization. == Definition == A private cloud computing infrastructure constitutes a distinctive model of cloud computing that facilitates a secure and distinct cloud environment where only the intended client can function. It can either be physically housed in the organization's in-house data center or be managed by a third-party provider. In a private cloud, the infrastructure and services are always sustained on a private network, and both the hardware and software are devoted exclusively to a single organization. == History == The concept of private cloud infrastructure started to take shape around the mid-2000s, coinciding with the rise of other cloud computing forms. It came into existence as a solution to the shortcomings of public clouds, particularly concerns over data control, security, and network performance. IT departments began to mirror the automation and self-service features of the public cloud in their data centers. Over time, these services became more advanced, and private cloud technology has been refined to address businesses and organizations' diverse needs. == Architecture == Private cloud computing infrastructure generally involves a mix of hardware, network infrastructure, and virtualization software. The hardware, often referred to as a cloud server or cloud array, consists of a server rack or a collection of server racks containing the storage and processors that constitute the cloud. The virtualization software, such as Hyper-V, OpenStack, or VMWare, establishes and oversees virtual machines with which users interact. The network infrastructure connects the private cloud to users and may facilitate connectivity with other on-premises data centers or clouds. == Applications == Private cloud infrastructures are usually utilized by medium to large businesses and organizations that need robust control over their data, have extensive computing needs, or have specific regulatory or compliance obligations. This includes healthcare organizations, government agencies, financial institutions, and any business that needs to process and store large data volumes.
Read more →
Gcore

Gcore is an edge AI, cloud, network, and security company headquartered in Luxembourg. Founded in 2014, the company provides low-latency services to industries including finance, healthcare, manufacturing, gaming, media and telecommunications internationally. As of March 2024, its global network includes over 180 Points of Presence (PoPs) across six continents. == History == Gcore was founded in 2014 in Luxembourg. The company built its own content delivery network, originally designed for the needs of the gaming industry. In 2016, Gcore's infrastructure expanded to multiple regions that were underserved by hyperscale cloud providers. In 2020, the company formed partnerships with Intel and Equinix. In 2022, Gcore launched the European AI Cloud, providing access to infrastructure for machine learning tasks. In March 2024, Gcore announced the acquisition of a web application and API protection (WAAP) solution from StackPath. In April 2024, Gcore received a commendation in the Industry Innovation category at the NVIDIA Partner Network Awards EMEA for developing the first speech-to-text technology for Luxembourgish, using the LuxemBERT AI model. In May 2024, Philipp Rösler, former vice-chancellor of Germany and federal minister of health joined the Gcore board. In July 2024, Gcore raised $60 million in a Series A funding round, marking the company's first external investment since its founding. In August 2024, Gcore was recognized as a Major Player in the IDC MarketScape report for European public cloud Infrastructure (IaaS) 2024 by IDC, the global market intelligence firm. In May 2025, Feiyu Xu became a member of the Gcore advisory board. == Network infrastructure == According to the company's website, Gcore has network locations in six continents: Europe, North America, Asia, South America, Africa, and Australia with over 14,000 peering partners and a network capacity exceeding 200 Tbps. According to a 2025 review by Geekflare, Gcore's CDN achieved an average global response time of around 30 milliseconds. Gcore offers AI cloud clusters, including a generative AI cluster with Nvidia GPUs in Luxembourg and additional sites in the Netherlands and Wales, as part of its European AI infrastructure. == Products and services == Gcore offers a range of services, including content delivery network (CDN), cloud computing,virtual machines, bare-metal servers, object storage AI infrastructure and inference, Kubernetes, video streaming, DDoS mitigation, web application and API protection (WAAP), Domain Name System (DNS). Gcore provides AI services and GPU cloud infrastructure to support model development, training, fine-tuning, and inference. In January 2025, the company introduced Everywhere Inference, a serverless inference solution that enables AI model deployment. == Controversies == Correctiv and Tageszeitung reported that Gcore supported the distribution of the TV network RT until April 2023, which has been under sanctions by the EU since March 2022. However, Gcore denies these allegations. == Collaborations == In 2024, Gcore and Qareeb Data Centres, a data center provider in the Middle East, launched a collaboration to integrate Gcore's AI, cloud and edge services across data centers in multiple Middle Eastern countries. In June 2025, Gcore joined the SmartSpires initiative, a €3.1 million smart city project co-funded by the Connecting Europe Facility. The three-year programme is coordinated by a public–private consortium including 5SKYE, the Luxembourg Institute of Science and Technology (LIST), Orange Luxembourg, and Gcore. The project aims to transform the Belval campus into a smart city by deploying 5G-enabled smart towers that integrate edge computing, artificial intelligence and IoT services. Within the consortium, Gcore acts as project coordinator and is responsible for the deployment of the edge infrastructure.
Read more →
Operational image

An operational image, also known as operative image, is an image that serves a functional, rather than aesthetic, purpose. Operational images are not intended to be viewed by people as representations of the real world; they are created to be used as instruments in performing some task or operation, often by machine automation. Operational images are used in a wide variety of applications, such as weapons targeting and guidance systems, and assisting surgeons performing robot-assisted surgery. The term "operational image" was first coined in 2000 by German filmmaker Harun Farocki in the first part of his three-part audiovisual installation, Eye/Machine. Farocki's installation included operational images used by militaries, such as weapons guidance and targeting systems. Eye/Machine featured images shown to the public by the United States military from the cameras used by laser-guided missiles in the Gulf War. Farocki defined operational images as "Images without a social goal, not for edification, not for reflection," and that they "do not represent an object, but rather are part of an operation." According to Volker Pantenburg, operational images are more accurately characterized as "visualizations of data". He describes operational images as a "working image" or an image that "performs work". Operational images are ubiquitous in modern society, used for a variety of military and non-military applications, such as inspecting sewer piping, and assisting surgeons performing robotic surgery.
Read more →
Teechart

TeeChart is a charting library for programmers, developed and managed by Steema Software of Girona, Catalonia, Spain. It is available as commercial and non-commercial software. TeeChart has been included in most Delphi and C++Builder products since 1997, and TeeChart Standard currently is part of Embarcadero RAD Studio 13 Florence. TeeChart Pro version is a commercial product that offers shareware releases for all of its formats. The TeeChart Charting Library offers charts, maps and gauges in versions for Delphi VCL/FMX, ActiveX, C# for Microsoft Visual Studio .NET. Full source code has always been available for all versions except the ActiveX version. TeeChart's user interface is translated into 38 languages. == History == The first version of TeeChart was authored in 1995 by David Berneda, co-founder of Steema, using the Borland Delphi Visual Component Library programming environment and TeeChart was first released as a shareware version and made available via Compuserve in the same year. It was written in the first version of Delphi VCL, as a 16-bit Charting Library named TeeChart version 1. The next version of TeeChart was released as a 32-bit library (Delphi 2 supported 32-bit compilation) but was badged as TeeChart VCL v3 to coincide with Borland's naming convention for inclusion on the toolbox palette of Borland Delphi v3 in 1997 and with C++ Builder v3 in 1998. It has been on the Delphi/C++ Builder toolbox palette ever since. The current version is Embarcadero RAD Studio 13 Florence. TeeChart's first ActiveX version named "version 3" too, to match the VCL version's nomenclature, was released in 1998. The version was optimised to work with Microsoft's Visual Studio v97 and v6.0 developer suites that include Visual Basic and Microsoft Visual C++ programming languages. Support for new programming environments followed with TeeChart's first native C# version for Microsoft Visual Studio .NET released in 2002 and TeeChart.Lite for .NET, a free charting component, released for Visual Studio.NET in 2003 and supporting too, Mono (programming). Steema Software released the first native TeeChart Java (programming language) version in 2006 and TeeChart's first native PHP version was released in 2009 and published as open-source in June 2010. Mobile versions of TeeChart, for Android (operating system) devices and Windows Phone 7 devices were released during the first half of 2011. In 2012 TeeChart extended functionality to iPhone/iPad and BlackBerry OS devices and a new JavaScript version was released in the same year to support HTML5 Canvas. In 2013 Steema launched TeeChart for .NET Chart for Windows Store applications and included support for Microsoft's Windows Phone 8 mobile platform. TeeChart for Xamarin.Forms written with 100% C# code and cross-platform support for .NET desktops, Windows Phone, iOS and Android was released in 2014. Also since 2014 Webforms charts now offers HTML5 interactivity. Steema launched TeeChart for Avalonia (software framework) in 2022 and in 2023 .NET_MAUI support was added to the TeeChart for .NET. == Usage == TeeChart is a general purpose charting component designed for use in differing ambits, offering a wide range of aesthetics to chart data. Generally TeeCharts published in the field, in areas where large amounts of data must be interpreted regularly, remain by designer choice in their simplest form to maximize the "data-ink ratio". Sloan Digital Sky Survey, SDSS Web Services' use for charting "Scientific .. plotting of online data" at The Virtual Observatory Spectrum Services reflects that approach. The SDSS chart authors choose to represent data using TeeChart's standard 2D line display. Speed is also a factor when choosing how to most effectively plot data. Realtime data, at frequencies of up to tens or hundreds of data points or more per second, require the most processor economic approach to charting. Computer processing time dedicated to the plotting of data needs to be as lightweight as possible, freeing-up computer tasks "to achieve real-time data acquisition, display and analysis". A critical and stated aspect of many data visualisation applications is the ability to offer interactivity to the user; NASA's document, the Orbital Debris Engineering Model Model ORDEM 3.0 - User's Guide, 2014, states that "The user may manipulate the graphs to zoom, pan, and copy to the clipboard and export to various file types" and Computer and Computing Technologies in Agriculture II, Volume 1, Daoliang, Li; Chunjiang, Zhao (2009), also using TeeChart, states "the properties at any point in the chart can be viewed moving the mouse over it". Writing about control education, Juha Lindfors states "The desired charting functionality (such as zooming and scaling) is achieved..". Charting applications have become increasingly 'onlined', made available either to a wider public or to a territorially remote userbase via networked applications. The World Wide Web (the Web) has become "by far, the most popular Internet protocol" to disseminate online applications. Most major IDEs now offer environments for web application developede aimed at browser hosted applications. Charting components, TeeChart among them, have adapted to provide models that work within a browser environment, often using static images and scripted layering techniques such as Ajax (programming) to offer a level of interactivity, improve response times and hide apparent delay from the user. Options to enrich client, browser-side processing flexibility are exploited by TeeChart libraries via modules that offer 'micro-environments' within the browser, such as the long established ActiveX technology, Adobe Flash, Microsoft Silverlight or Java Applets. Serverside environments offer too, a means to interact with browser based script to dynamically respond to charting requests. Joomla and CodeIgniter are host environments for TeeChart PHP and an example of an Embarcadero IntraWeb VCL designed application using TeeChart, is documented here. == Programmer reference == The Code Project includes a demo that uses TeeChart.Lite, called 'Self-Organizing Feature Maps (Kohonen maps)' written by Bashir Magomedovl and SourceForge includes a Database Stress and Monitor that also uses TeeChart.Lite. Books and information sources that include substantial sections about working with the Delphi version of TeeChart include "Mastering Delphi 6" by Marco Cantù, "C++ Builder 5 developer's guide", a video Delphi Tutorial on charting JPEG compression and support forums and reference pages at TeeChart Support Forums. Non-English language document sources include, in Czech "Myslíme v jazyku Delphi 7: knihovna zkušeného programátora" by Marco Cantù, and Chinese, Delphi 6, Delphi, and Delphi 5.
Read more →
WorkingPoint

WorkingPoint is a web-based application that provides a suite of small business management tools. It is designed to serve as a single point of access for various business operations, featuring a user-friendly interface. WorkingPoint's functionalities include double-entry bookkeeping, contact management, inventory management, invoicing, and bill and expense management. == Company == WorkingPoint, formerly Netbooks Inc, is a privately held corporation based in San Francisco, CA. The company is backed by CMEA Capital, also based in San Francisco. WorkingPoint has about ten employees and is led by CEO Tate Holt and Chairman Tom Proulx. Proulx is a co-founder of Intuit and an original author of that company’s Quicken personal finance software. The company was founded in 2007 under its original name Netbooks by co-creator Ridgely Evers. Evers set out to design a product that was more user-friendly than Intuit’s Quickbooks, which he also co-created. In mid-2009 the company officially rebranded itself and its flagship product “WorkingPoint”. The purpose of the re-branding was to disassociate the company from the product category of small laptops also known as netbooks. == Social Media Presence == WorkingPoint maintains a daily blog geared toward small business owners and managers. Each week the blog is updated with 3 WorkingPoint product feature or “how-to” posts, 2 subscriber company profiles, and 2 small business coaching posts. The company also maintains a Twitter page and a Facebook page. == Product Description (Free Version) == WorkingPoint allows businesses to invoice up to five customers (repeatedly) and provides account access for up to two individual users free of charge. Online Invoicing WorkingPoint allows users to create customized quotes and invoices online. The invoices can be used to bill customers via email or hardcopy post. WorkingPoint compiles the info from these invoices so users can track customer payments, inventory costs, shipping charges, accounts receivable and sales taxes. Users can also manage customer overpayments, provide customer loyalty discounts, and view a customer invoice history. Bill & Expense Management Users can track their bills and expenses by entering info into the WorkingPoint interface. WorkingPoint compiles this info so users can track categorized expenses, accounts paid, accounts payable, and vendor purchase history. The interface also allows users to add to their inventory while entering billing info. Double-Entry Bookeeping WorkingPoint automatically records entries under the double-entry bookkeeping system (also known as debits and credits) when the user completes invoicing and expense forms. Users can view transactions in general ledger format and perform closing entries if necessary. This functionality is designed for users who do not have an accounting background. Business Contact Management WorkingPoint provides an interface for users to manage their customer and vendor contact info. The software automatically tracks the user’s relationship with contacts, so users can track a contact’s sales and purchase history. Contacts can be imported and exported via numerous email clients including Microsoft Outlook, Yahoo! Mail, Google Gmail, and Mac Address Book. Inventory Management The software automatically adjusts inventory quantities after every purchase and sale. Users can track their current inventory quantity, average cost of inventory on-hand, cost of goods sold (COGS) and top-selling products. Users can also make manual adjustments to inventory when necessary. Financial Reporting Users can view a balance sheet, income statement, or cash flow statement pertaining to their business. The software automatically manages accruals to produce the balance sheet and income statement. Users can choose a data range from which to draw any of these reports. Financial reports can be converted to pdf format or exported (with formulas intact) to OpenOffice or Microsoft Excel. Cash Management WorkingPoint enables users to monitor cash balances on their bank accounts. The software automatically tracks cash inflows and outflows when users manage their accounts payable and accounts receivable. Business Dashboard The Business Dashboard visually and graphically displays key real-time business data. Users can customize the Dashboard to display data of their choosing. Online Company Profile Users can create an online company profile in order to have a presence on the Internet and as a basis for participation in WorkingPoint’s small business community features. Public profiles are featured in the WorkingPoint Company Directory and can be viewed externally using the URL format: https://businessname.workingpoint.com. == Product Description (Premium Version) == The premium version of WorkingPoint costs $10 per month. It includes all of the functionalities of the free version, allowing unlimited invoicing and account access. It also offers the following functions: 1099 Tax Reporting, invoice payment collection via PayPal, Email Marketing via VerticalResponse, and the Premium Reports & Accounting Package. 1099 Tax Reporting Users can identify qualifying companies and individuals for IRS Form 1099 or IRS Form 1096 reporting. WorkingPoint automatically tracks payments made to these companies and individuals. Users can then generate 1099 reports for distribution. Premium Reports & Accounting Package This includes: a Daily Operating Report providing users with sales and cash flow information, customizable accounts categorization, and cash flow statements using the indirect method of reporting. Invoice Payment Collection via PayPal Users can collect payment on their invoices via PayPal. Email Marketing via VerticalResponse The WorkingPoint premium package includes 500 email credits with the email marketing firm VerticalResponse.
Read more →
Business Controls Corporation

Business Controls Corporation is a privately held computer company that developed an application-program-generator and also a series of accounting software packages. These packages were widely enough used for various business magazines to have back-of-the-book ads for companies seeking accountants with experience in one or more of them. Computer magazines ran coverage for their SB-5 application-program-generator as from time to time new versions were released, each with new or improved features. == Early days == The company's initial offerings were packages for the DEC PDP-8, although Business Controls Corporation also wrote custom-written programs for customers. Large customers with mainframes who also used smaller systems for departmental use and distributed processing also used BCC's services. == SB-5 == The addition of an application-program-generator named SB-5 that, from specifications, could generate COBOL code was a major step forward. Although this began with supporting the DEC PDP-11, they subsequently began to support COBOL on DEC's DECsystem-10 & DECSYSTEM-20. VAX support came later. The specifications also permitted COBOL inserts and overrides: SB-5 could build an application that was all COBOL, yet only code the portions that varied from BCC's "vanilla" accounting packages. === Similar offerings === A similar idea was done for the IBM mainframe world in the form of a series of application-program-generators from Dylakor Corporation. They were named DYL-250, DYL-260, DYL-270 & DYL-280. Dylakor was acquired by Computer Associates. The specific syntax was different, but it had wider use, and - a mark of success and recognition in the industry - syntax-compatible implementations were released by a competitor. Still another alternative was Peat Marwick Mitchell's PMM2170 application-program-generator package. Like the others, it supported COBOL inserts and overrides. === Extended integration === Business Controls Corporation subsequently extended SB-5's feature set to provide support for System 1022, a product for the DECsystem-10 & DECSYSTEM-20; 1022's vendor also had a VAX/VMS (later OpenVMS) product, System 1032.
Read more →
Plant Nanny

Plant Nanny is a water tracker mobile application which reminds users to drink water. It was developed by Taiwanese app maker Fourdesire. The app was first released in 2013 and is available on the Apple App Store for iPhones and the Google Play Store for Android devices. == Description == Play Nanny uses a game method that allows users to turn their virtual selves into plants, which grows and thrives as the user drinks more water. The app sends occasional push notifications to remind users to drink water throughout the day. Users can choose from a wide range of plants, including cacti and carnations, and track their water intake. The app uses two resources, How to calculate how much water you should drink by Jennifer Stone (2018) and Human energy requirements by the Food and Agriculture Organization (2004), to calculate the recommended daily water intake for its users. Upon downloading the app, users are prompted to input basic personal information which is then used to calculate the recommended daily water intake and prompts them to drink the appropriate amount. == Accolades ==
Read more →
Carrier cloud

In cloud computing, a carrier cloud is a class of cloud that integrates wide area networks (WAN) and other attributes of communications service providers’ carrier-grade networks to enable the deployment of highly-complex applications in the cloud. In contrast, classic cloud computing focuses on the data center and does not address the network connecting data centers and cloud users. This may result in unpredictable response times and security issues when business-critical data are transferred over the Internet. == History == The advent of virtualization technology, cost-effective computing hardware, and ubiquitous Internet connectivity have enabled the first wave of cloud services starting in the early years of the 21st century. But many businesses and other organizations hesitated to move to more demanding applications, from on-premises dedicated hardware to private or public clouds. As a response, communications service providers started in the 2010/2011 time frame to develop carrier clouds that address perceived weaknesses in existing cloud services. Cited weaknesses vary but often include possible downtime, security issues, high cost of custom software and data transfer, inflexibility of some cloud apps, poor customer and nonfulfillment of service level agreements (SLAs). == Characteristics == To enable the deployment of time-sensitive and business critical applications in the cloud, the carrier cloud is designed to match or even exceed the characteristics of on-premises deployments. Therefore, the carrier cloud is characterized by some or all of the following items: Configurable, elastic network performance: Typical cloud computing solutions use the best effort of the public Internet to connect cloud users and data centers. This approach provides instant connectivity but does not offer control over network capacities, latencies, and jitter. Carrier clouds address these gaps with content delivery networks and/or dedicated virtual private networks (VPN) at OSI layers 1 (optical wavelengths), 2 (data link layer), and 3 (network layer). These VPNs can be configured to offer the desired performance parameters and exhibit the same type of elasticity for the network that regular clouds provide for servers and storage. To achieve the requested performance parameters, such as low latency, cloud applications can be (automatically) allocated to distributed data centers that are close enough to the cloud users. Automatic resource placement: For a cloud with multiple data centers, information about both the data center and the connecting network is relevant for a decision of where to place cloud images and storage volumes. For this decision, carrier clouds can obtain relevant information about the network, e.g., using the Application-Layer Traffic Optimization (ALTO) protocol. High level of security and governance: Cloud application providers are subject to general and domain specific security, privacy, and governance requirements and regulations, such as the European Data Protection Directive and the U.S. Health Insurance Portability and Accountability Act. For added security, the wide area network of the carrier cloud can provide segregated encrypted or unencrypted network links that are not accessible from the general Internet. At the data center, the carrier cloud provides e.g. virtual private servers, management processes, logs, and documentation to fulfill security and governance rules. Location control: Fundamentally, cloud users should not be concerned with the geographic location of their cloud resources. However, privacy and other regulations may mandate that certain types of data must not be sent outside a national jurisdiction or other geographical region. Open APIs: Carrier clouds provide graphical user interfaces and Web application programming interfaces that allow cloud application providers to set up, manage, and monitor both, the data center and the WAN, of their cloud services. == Architecture == Carrier clouds encompass data centers at different network tiers and wide area networks that connect multiple data centers to each other as well as to the cloud users. Links between data centers are used for failover, overflow, backup, and geographic diversity. Carrier clouds can be set up as public, private, or hybrid clouds. The carrier cloud federates these cloud entities by using a single management system to orchestrate, manage, and monitor data center and network resources as a single system.
Read more →
Dave's Redistricting

Dave's Redistricting App (DRA) is an online web app originally created by Dave Bradlee that allows anyone to simulate redistricting a U.S. state's congressional and legislative districts. == Purpose == According to Bradlee, the software was designed to "put power in people's hands," and so that they "can see how the process works, so it's a little less mysterious than it was 10 years ago." Bradlee has noticed that many citizens are taking this process seriously and using his app to create legitimate redistricting maps that could be put in place. Some websites have called Bradlee the pioneer and cause of the rise of do-it-yourself redistricting. States such as Montana in 2021 allowed the general population to use it to submit redistricting proposals following the 2020 United States Census. Dave's Redistricting has frequently been mentioned as a resource that can be used to combat gerrymandering, given that the public has free access to it. Political science firms such as FiveThirtyEight have used the website to draw examples of gerrymandered districts, including on their famous Atlas of Redistricting. Dave Bradlee built the first generation of DRA. DRA 2020 is built by a small team of volunteers—Dave Bradlee, Terry Crowley, Alec Ramsay, and David Rinn—all with a shared passion for technology & democracy and all Microsoft veterans. Their mission is to empower civic organizations and citizen activists to advocate for fair congressional and legislative districts and increased transparency in the redistricting process. == Functions == Users can redraw the congressional and state legislative districts for all 50 states, the District of Columbia, and Puerto Rico using a variety of census and election datasets including Cook PVI. Maps can be optimized for different criteria. DRA 2020 added several major features to the first generation app: Sharing & collaborative editing of maps, like Google Docs Multiple statewide elections for all 50 states including the ability to import your own data Comprehensive analytics for evaluating and comparing maps Custom overlays, and Block-level editing DRA remains free to use. == Versions == 2.2: This uses Bing Maps, an outdated software that projects the districts of a single state onto a map of the United States. 2.5: After Bing Maps announced that it would no longer be updating for the foreseen future, the U.S. Map feature was removed. DRA 2020: At the end of 2018, a beta version of 2020 was released. This version that did not require Microsoft Silverlight and could be used in any web browser. DRA 2020 has been under continuous development since and is built using React (JavaScript library), Mapbox, OpenStreetMap, TypeScript, Node.js, Amazon Web Services, as well as many open source components, tools, and icons.
Read more →