Cloud computing is defined by the International Organization for Standardization (ISO) as "a paradigm for enabling network access to a scalable and elastic pool of shareable physical or virtual resources with self-service provisioning and administration on demand". It is commonly referred to as "the cloud". == Characteristics == In 2011, the National Institute of Standards and Technology (NIST) identified five "essential characteristics" for cloud systems. Below are the exact definitions according to NIST: On-demand self-service: "A consumer can unilaterally provision computing capabilities, such as server time and network storage, as needed automatically without requiring human interaction with each service provider." Broad network access: "Capabilities are available over the network and accessed through standard mechanisms that promote use by heterogeneous thin or thick client platforms (e.g., mobile phones, tablets, laptops, and workstations)." Resource pooling: " The provider's computing resources are pooled to serve multiple consumers using a multi-tenant model, with different physical and virtual resources dynamically assigned and reassigned according to consumer demand." Rapid elasticity: "Capabilities can be elastically provisioned and released, in some cases automatically, to scale rapidly outward and inward commensurate with demand. To the consumer, the capabilities available for provisioning often appear unlimited and can be appropriated in any quantity at any time." Measured service: "Cloud systems automatically control and optimize resource use by leveraging a metering capability at some level of abstraction appropriate to the type of service (e.g., storage, processing, bandwidth, and active user accounts). Resource usage can be monitored, controlled, and reported, providing transparency for both the provider and consumer of the utilized service. By 2023, the International Organization for Standardization (ISO) had expanded and refined the list. == History == The history of cloud computing extends to the 1960s, with the initial concepts of time-sharing becoming popularized via remote job entry (RJE). The "data center" model, where users submitted jobs to operators to run on mainframes, was predominantly used during this era. This period saw broad experimentation with making large-scale computing power more accessible through time-sharing, while optimizing infrastructure, platforms, and applications to improve efficiency for end users. The "cloud" metaphor for virtualized services dates to 1994, when it was used by General Magic for the universe of "places" that mobile agents in the Telescript environment could "go". The metaphor is credited to David Hoffman, a General Magic communications specialist, based on its long-standing use in networking and telecom. The expression cloud computing became more widely known in 1996 when Compaq Computer Corporation drew up a business plan for future computing and the Internet. The company's ambition was to supercharge sales with "cloud computing-enabled applications". The business plan foresaw that online consumer file storage would likely be commercially successful. As a result, Compaq decided to sell server hardware to internet service providers. In the 2000s, the application of cloud computing began to take shape with the establishment of Amazon Web Services (AWS) in 2002, which allowed developers to build applications independently. In 2006 Amazon Simple Storage Service, known as Amazon S3, and the Amazon Elastic Compute Cloud (EC2) were released. In 2008 NASA's development of the first open-source software for deploying private and hybrid clouds. The following decade saw the launch of various cloud services. In 2010, Microsoft launched Microsoft Azure, and Rackspace Hosting and NASA initiated an open-source cloud-software project, OpenStack. IBM introduced the IBM SmartCloud framework in 2011, and Oracle announced the Oracle Cloud in 2012. In December 2019, Amazon launched AWS Outposts, a service that extends AWS infrastructure, services, APIs, and tools to customer data centers, co-location spaces, or on-premises facilities. == Value proposition == Cloud computing can shorten time to market by offering pre-configured tools, scalable resources, and managed services, allowing users to focus on core business value rather than maintaining infrastructure. Cloud platforms can enable organizations and individuals to reduce upfront capital expenditures on physical infrastructure by shifting to an operational expenditure model, where costs scale with usage. Cloud platforms also offer managed services and tools, such as artificial intelligence, data analytics, and machine learning, which might otherwise require significant in-house expertise and infrastructure investment. While cloud computing can offer cost advantages through effective resource optimization, organizations often face challenges such as unused resources, inefficient configurations, and hidden costs without proper oversight and governance. Many cloud platforms provide cost management tools, such as AWS Cost Explorer and Azure Cost Management, and frameworks like FinOps have emerged to standardize financial operations in the cloud. Cloud computing also facilitates collaboration, remote work, and global service delivery by enabling secure access to data and applications from any location with an internet connection. Cloud providers offer various redundancy options for core services, such as managed storage and managed databases, though redundancy configurations often vary by service tier. Advanced redundancy strategies, such as cross-region replication or failover systems, typically require explicit configuration and may incur additional costs or licensing fees. Cloud environments operate under a shared responsibility model, where providers are typically responsible for infrastructure security, physical hardware, and software updates, while customers are accountable for data encryption, identity and access management (IAM), and application-level security. These responsibilities vary depending on the cloud service model—Infrastructure as a Service (IaaS), Platform as a Service (PaaS), or Software as a Service (SaaS)—with customers typically having more control and responsibility in IaaS environments and progressively less in PaaS and SaaS models, often trading control for convenience and managed services. == Adoption and suitability == The decision to adopt cloud computing or maintain on-premises infrastructure depends on factors such as scalability, cost structure, latency requirements, regulatory constraints, and infrastructure customization. Organizations with variable or unpredictable workloads, limited capital for upfront investments, or a focus on rapid scalability benefit from cloud adoption. Startups, SaaS companies, and e-commerce platforms often prefer the pay-as-you-go operational expenditure (OpEx) model of cloud infrastructure. Additionally, companies prioritizing global accessibility, remote workforce enablement, disaster recovery, and leveraging advanced services such as AI/ML and analytics are well-suited for the cloud. In recent years, some cloud providers have started offering specialized services for high-performance computing and low-latency applications, addressing some use cases previously exclusive to on-premises setups. On the other hand, organizations with strict regulatory requirements, highly predictable workloads, or reliance on deeply integrated legacy systems may find cloud infrastructure less suitable. Businesses in industries like defense, government, or those handling highly sensitive data often favor on-premises setups for greater control and data sovereignty. Additionally, companies with ultra-low latency requirements, such as high-frequency trading (HFT) firms, rely on custom hardware (e.g., FPGAs) and physical proximity to exchanges, which most cloud providers cannot fully replicate despite recent advancements. Similarly, tech giants like Google, Meta, and Amazon build their own data centers due to economies of scale, predictable workloads, and the ability to customize hardware and network infrastructure for optimal efficiency. However, these companies also use cloud services selectively for certain workloads and applications where it aligns with their operational needs. In practice, many organizations are increasingly adopting hybrid cloud architectures, combining on-premises infrastructure with cloud services. This approach allows businesses to balance scalability, cost-effectiveness, and control, offering the benefits of both deployment models while mitigating their respective limitations. == Challenges and limitations == One of the primary challenges of cloud computing, compared with traditional on-premises systems, is maintaining data security and privacy. Cloud users entrust their sensitive data to third-party providers, who may not have adequate measures to protect it from unau
Topological deep learning
Topological deep learning (TDL) is a research field that extends deep learning to handle complex, non-Euclidean data structures. Traditional deep learning models, such as convolutional neural networks (CNNs) and recurrent neural networks (RNNs), excel in processing data on regular grids and sequences. However, scientific and real-world data often exhibit more intricate data domains encountered in scientific computations, including point clouds, meshes, time series, scalar fields graphs, or general topological spaces like simplicial complexes and CW complexes. TDL addresses this by incorporating topological concepts to process data with higher-order relationships, such as interactions among multiple entities and complex hierarchies. This approach leverages structures like simplicial complexes and hypergraphs to capture global dependencies and qualitative spatial properties, offering a more nuanced representation of data. TDL also encompasses methods from computational and algebraic topology that permit studying properties of neural networks and their training process, such as their predictive performance or generalization properties. The mathematical foundations of TDL are algebraic topology, differential topology, and geometric topology. Therefore, TDL can be generalized for data on differentiable manifolds, knots, links, tangles, curves, etc. == History and motivation == Traditional techniques from deep learning often operate under the assumption that a dataset is residing in a highly-structured space (like images, where convolutional neural networks exhibit outstanding performance over alternative methods) or a Euclidean space. The prevalence of new types of data, in particular graphs, meshes, and molecules, resulted in the development of new techniques, culminating in the field of geometric deep learning, which originally proposed a signal-processing perspective for treating such data types. While originally confined to graphs, where connectivity is defined based on nodes and edges, follow-up work extended concepts to a larger variety of data types, including simplicial complexes and CW complexes, with recent work proposing a unified perspective of message-passing on general combinatorial complexes. An independent perspective on different types of data originated from topological data analysis, which proposed a new framework for describing structural information of data, i.e., their "shape," that is inherently aware of multiple scales in data, ranging from local information to global information. While at first restricted to smaller datasets, subsequent work developed new descriptors that efficiently summarized topological information of datasets to make them available for traditional machine-learning techniques, such as support vector machines or random forests. Such descriptors ranged from new techniques for feature engineering over new ways of providing suitable coordinates for topological descriptors, or the creation of more efficient dissimilarity measures. Contemporary research in this field is largely concerned with either integrating information about the underlying data topology into existing deep-learning models or obtaining novel ways of training on topological domains. == Learning on topological spaces == One of the core concepts in topological deep learning is considering the domain upon which this data is defined and supported. In case of Euclidean data, such as images, this domain is a grid, upon which the pixel value of the image is supported. In a more general setting this domain might be a topological domain. Studying and developing deep learning models that are supported ln topological domains constitute the essence of topological deep learning. Next, we introduce the most common topological domains that are encountered in a deep learning setting. These domains include, but not limited to, graphs, simplicial complexes, cell complexes, combinatorial complexes and hypergraphs. Given a finite set S of abstract entities, a neighborhood function N {\displaystyle {\mathcal {N}}} on S is an assignment that attach to every point x {\displaystyle x} in S a subset of S or a relation. Such a function can be induced by equipping S with an auxiliary structure. Edges provide one way of defining relations among the entities of S. More specifically, edges in a graph allow one to define the notion of neighborhood using, for instance, the one hop neighborhood notion. Edges however, limited in their modeling capacity as they can only be used to model binary relations among entities of S since every edge is connected typically to two entities. In many applications, it is desirable to permit relations that incorporate more than two entities. The idea of using relations that involve more than two entities is central to topological domains. Such higher-order relations allow for a broader range of neighborhood functions to be defined on S to capture multi-way interactions among entities of S. Next we review the main properties, advantages, and disadvantages of some commonly studied topological domains in the context of deep learning, including (abstract) simplicial complexes, regular cell complexes, hypergraphs, and combinatorial complexes. ==== Comparisons among topological domains ==== Each of the enumerated topological domains has its own characteristics, advantages, and limitations: Simplicial complexes Simplest form of higher-order domains. Extensions of graph-based models. Admit hierarchical structures, making them suitable for various applications. Hodge theory can be naturally defined on simplicial complexes. Require relations to be subsets of larger relations, imposing constraints on the structure. Cell Complexes Generalize simplicial complexes. Provide more flexibility in defining higher-order relations. Each cell in a cell complex is homeomorphic to an open ball, attached together via attaching maps. Boundary cells of each cell in a cell complex are also cells in the complex. Represented combinatorially via incidence matrices. Hypergraphs Allow arbitrary set-type relations among entities. Relations are not imposed by other relations, providing more flexibility. Do not explicitly encode the dimension of cells or relations. Useful when relations in the data do not adhere to constraints imposed by other models like simplicial and cell complexes. Combinatorial Complexes : Generalize and bridge the gaps between simplicial complexes, cell complexes, and hypergraphs. Allow for hierarchical structures and set-type relations. Combine features of other complexes while providing more flexibility in modeling relations. Can be represented combinatorially, similar to cell complexes. ==== Hierarchical structure and set-type relations ==== The properties of simplicial complexes, cell complexes, and hypergraphs give rise to two main features of relations on higher-order domains, namely hierarchies of relations and set-type relations. ===== Rank function ===== A rank function on a higher-order domain X is an order-preserving function rk: X → Z, where rk(x) attaches a non-negative integer value to each relation x in X, preserving set inclusion in X. Cell and simplicial complexes are common examples of higher-order domains equipped with rank functions and therefore with hierarchies of relations. ===== Set-type relations ===== Relations in a higher-order domain are called set-type relations if the existence of a relation is not implied by another relation in the domain. Hypergraphs constitute examples of higher-order domains equipped with set-type relations. Given the modeling limitations of simplicial complexes, cell complexes, and hypergraphs, we develop the combinatorial complex, a higher-order domain that features both hierarchies of relations and set-type relations. The learning tasks in TDL can be broadly classified into three categories: Cell classification: Predict targets for each cell in a complex. Examples include triangular mesh segmentation, where the task is to predict the class of each face or edge in a given mesh. Complex classification: Predict targets for an entire complex. For example, predict the class of each input mesh. Cell prediction: Predict properties of cell-cell interactions in a complex, and in some cases, predict whether a cell exists in the complex. An example is the prediction of linkages among entities in hyperedges of a hypergraph. In practice, to perform the aforementioned tasks, deep learning models designed for specific topological spaces must be constructed and implemented. These models, known as topological neural networks, are tailored to operate effectively within these spaces. === Topological neural networks === Central to TDL are topological neural networks (TNNs), specialized architectures designed to operate on data structured in topological domains. Unlike traditional neural networks tailored for grid-like structures, TNNs are adept at handling more intricate data representations, such as graphs
Wunderlist
Wunderlist is a discontinued cloud-based task management application. It allowed users to create lists to manage their tasks from a smartphone, tablet, computer and smartwatch. Wunderlist was free; additional collaboration features were available in a paid version known as Wunderlist Pro, released April 2013. Wunderlist was created in 2011 by Berlin-based startup 6Wunderkinder (Engl.: 6Prodigies). The company was acquired by Microsoft in June 2015, at which time the app had over 13 million users. In April 2017, Microsoft announced that Wunderlist would eventually be discontinued in favor of Microsoft To Do, a new multi-platform app developed by the Wunderlist team that has direct integration with the company's Office 365 service. On December 6, 2019, Microsoft announced that it would shut down Wunderlist on May 6, 2020. After this date, the application would no longer sync but users could still import their content into Microsoft To Do. == History == In 2009, Wunderlist's CEO Christian Reber called on the social network platform XING for business partners to create a new to-do app. Frank Thelen responded and together Reber and Thelen developed first concepts for Wunderlist. The necessary seed funding was granted by High-Tech Gründerfonds and e42 GmbH. The first version of Wunderlist was launched on November 9, 2010. Initially, the program was created for desktop PCs and platforms such as Windows, Linux and Mac OS X. In December 2011, the app received approval for the iPhone. Subsequently, the developers released a version prepared for the iPad with the name Wunderlist HD. In September 2012, the developers announced a shutdown of their service Wunderkit. Instead they wanted to focus on creating a new version of Wunderlist, which was later on released in December 2012 under the name Wunderlist 2. In September 2013, the company announced it had over 5 million users. In July 2014, a new major update was released under the name of Wunderlist 3, with a new real-time sync architecture. Wunderlist reached 10 million users in December 2014. On June 1, 2015, it was announced that Microsoft had acquired 6Wunderkinder, makers of Wunderlist, for between US$100 million and US$200 million (~$258 million in 2024). Following its acquisition of the app, Microsoft announced in April 2017 a preview of To-Do, a multi-platform task management app developed by the Wunderlist team that was intended to eventually replace Wunderlist and incorporate most of its features. As of January 2019, To-Do had not yet reached feature parity with Wunderlist, with its team citing that the service had to be completely re-written to use Microsoft Azure instead of Amazon Web Services. Frustrated by the perceived lack of roadmap, in September 2019, Reber began to publicly ask Microsoft-related accounts on Twitter whether he could buy Wunderlist back. Shortly afterward, however, Microsoft unveiled updates to To-Do that make it more closely resemble Wunderlist. In December 2019, Microsoft announced that it would fully shut down Wunderlist as of May 6, 2020. The team responsible for creating Wunderlist, led by co-founder Christian Reber, created that Superlist app in early 2024. == Finances == In its initial round of funding, 100,000 euro was invested in 6Wunderkinder by Frank Thelen and others. In December 2010, High-Tech Gründerfonds invested 500,000 euro (approximately US$660,000) in the company. T-Venture also invested an undisclosed amount in the startup. In its Series A round of funding in November 2011, Atomico invested $4.2 million (~$5.76 million in 2024) while High-Tech Gründerfonds invested an undisclosed additional amount. In May 2012, High-Tech Gründerfonds sold off its stake in 6Wunderkinder to Earlybird Venture Capital. In November 2013, $19 million (~$25.2 million in 2024) was raised in a Series B round led by Sequoia Capital with participation from Earlybird and Atomico. == Awards == In 2013, Wunderlist for Mac was named App of the Year. Wunderlist was selected as a Google Play Top Developer in 2013. In 2014, Wunderlist won the "Golden Mi" award from Xiaomi, and also named as one of its Best Apps of 2014 was given a "Google Play Editor's Choice" award, and was named in Google Play's Best Apps of 2014 as well as Apple's Best of 2014.
Serverless computing
Serverless computing is "a cloud service category where the customer can use different cloud capability types without the customer having to provision, deploy and manage either hardware or software resources, other than providing customer application code or providing customer data. Serverless computing represents a form of virtualized computing", according to ISO/IEC 22123-2. Serverless computing is a broad ecosystem that includes the cloud provider, function as a service (FaaS), managed services, tools, frameworks, engineers, stakeholders, and other interconnected elements. == Overview == Serverless is a misnomer in the sense that servers are still used by cloud service providers to execute code for developers. The definition of serverless computing has evolved over time, leading to varied interpretations. According to Ben Kehoe, serverless represents a spectrum rather than a rigid definition. Emphasis should shift from strict definitions and specific technologies to adopting a serverless mindset, focusing on leveraging serverless solutions to address business challenges. Serverless computing does not eliminate complexity but shifts much of it from the operations team to the development team. However, this shift is not absolute, as operations teams continue to manage aspects such as identity and access management (IAM), networking, security policies, and cost optimization. Additionally, while breaking down applications into finer-grained components can increase management complexity, the relationship between granularity and management difficulty is not strictly linear. There is often an optimal level of modularization where the benefits outweigh the added management overhead. According to Yan Cui, serverless techniques should be adopted only when they help to deliver customer value faster. And while adopting, organizations should take small steps and de-risk along the way. == Challenges == Serverless applications are prone to fallacies of distributed computing. In addition, they are prone to the following fallacies: Versioning is simple Compensating transactions always work Observability is optional === Monitoring and debugging === Monitoring and debugging serverless applications can present unique challenges due to their distributed, event-driven nature and proprietary environments. Traditional tools may fall short, making it difficult to track execution flows across services. However, modern solutions such as distributed tracing tools (e.g., AWS X-Ray, Datadog), centralized logging, and cloud-agnostic observability platforms are mitigating these challenges. Emerging technologies like OpenTelemetry, AI-powered anomaly detection, and serverless-specific frameworks are further improving visibility and root cause analysis. While challenges persist, advancements in monitoring and debugging tools are steadily addressing these limitations. === Security === According to OWASP, serverless applications are vulnerable to variations of traditional attacks, insecure code, and some serverless-specific attacks (like denial of wallet). So, the risks have changed and attack prevention requires a shift in mindset. === Vendor lock-in === Serverless computing is provided as a third-party service. Applications and software that run in the serverless environment are by default locked to a specific cloud vendor. This issue is exacerbated in serverless computing, as with its increased level of abstraction, public vendors only allow customers to upload code to a FaaS platform without the authority to configure underlying environments. More importantly, when considering a more complex workflow that includes backend-as-a-service (BaaS), a BaaS offering can typically only natively trigger a FaaS offering from the same provider. This makes the workload migration in serverless computing virtually impossible. Therefore, considering how to design and deploy serverless workflows from a multi-cloud perspective could mitigate this. == High-performance computing == Serverless computing may not be ideal for certain high-performance computing (HPC) workloads due to resource limits often imposed by cloud providers, including maximum memory, CPU, and runtime restrictions. For workloads requiring sustained or predictable resource usage, bulk-provisioned servers can sometimes be more cost-effective than the pay-per-use model typical of serverless platforms. However, serverless computing is increasingly capable of supporting specific HPC workloads, particularly those that are highly parallelizable and event-driven, by leveraging its scalability and elasticity. The suitability of serverless computing for HPC continues to evolve with advancements in cloud technologies. == Anti-patterns == The grain of sand anti-pattern refers to the creation of excessively small components (e.g., functions) within a system, often resulting in increased complexity, operational overhead, and performance inefficiencies. Lambda pinball is a related anti-pattern that can occur in serverless architectures when functions (e.g., AWS Lambda, Azure functions) excessively invoke each other in fragmented chains, leading to latency, debugging and testing challenges, and reduced observability. These anti-patterns are associated with the formation of a distributed monolith. These anti-patterns are often addressed through the application of clear domain boundaries, which distinguish between public and published interfaces. Public interfaces are technically accessible interfaces, such as methods, classes, API endpoints, or triggers, but they do not come with formal stability guarantees. In contrast, published interfaces involve an explicit stability contract, including formal versioning, thorough documentation, a defined deprecation policy, and often support for backward compatibility. Published interfaces may also require maintaining multiple versions simultaneously and adhering to formal deprecation processes when breaking changes are introduced. Fragmented chains of function calls are often observed in systems where serverless components (functions) interact with other resources in complex patterns, sometimes described as spaghetti architecture or a distributed monolith. In contrast, systems exhibiting clearer boundaries typically organize serverless components into cohesive groups, where internal public interfaces manage inter-component communication, and published interfaces define communication across group boundaries. This distinction highlights differences in stability guarantees and maintenance commitments, contributing to reduced dependency complexity. Additionally, patterns associated with excessive serverless function chaining are sometimes addressed through architectural strategies that emphasize native service integrations instead of individual functions, a concept referred to as the functionless mindset. However, this approach is noted to involve a steeper learning curve, and integration limitations may vary even within the same cloud vendor ecosystem. Reporting on serverless databases presents challenges, as retrieving data for a reporting service can either break the bounded contexts, reduce the timeliness of the data, or do both. This applies regardless of whether data is pulled directly from databases, retrieved via HTTP, or collected in batches. Mark Richards refers to this as the reach-in reporting anti-pattern. A possible alternative to this approach is for databases to asynchronously push the necessary data to the reporting service instead of the reporting service pulling it. While this method requires a separate contract between services and the reporting service and can be complex to implement, it helps preserve bounded contexts while maintaining a high level of data timeliness. == Principles == Adopting DevSecOps practices can help improve the use and security of serverless technologies. In serverless applications, the distinction between infrastructure and business logic is often blurred, with applications typically distributed across multiple services. To maximize the effectiveness of testing, integration testing is emphasized for serverless applications. Additionally, to facilitate debugging and implementation, orchestration is used within the bounded context, while choreography is employed between different bounded contexts. Ephemeral resources are typically kept together to maintain high cohesion. However, shared resources with long spin-up times, such as AWS RDS clusters and landing zones, are often managed in separate repositories, deployment pipeline, and stacks.
ActivityPub
ActivityPub is a protocol and open standard for decentralized social networking. It provides a client-to-server (C2S) API for creating and modifying content, as well as a federated server-to-server (S2S) protocol for delivering notifications and content to other servers. ActivityPub is the defining standard of the Fediverse, a decentralised social network of various social interaction models, and content types, which consists of independently managed instances of software such as Mastodon, Pixelfed and PeerTube, among others. ActivityPub is considered to be an update to the ActivityPump protocol used in pump.io, and the official W3C repository for ActivityPub is identified as a fork of ActivityPump. The creation of a new standard for decentralized social networking was prompted by the complexity of OStatus, the most commonly used protocol at the time. OStatus was built using a multitude of technologies (such as Atom, Salmon, WebSub and WebFinger), a product of the infrastructure used in GNU social (the originator and largest user of the OStatus protocol), which made it difficult to implement the protocol into new software. OStatus was also only designed to work with microblogging services, with little flexibility to the types of data that it could hold. The standard was first published by the World Wide Web Consortium (W3C) as a W3C Recommendation in January 2018 by the Social Web Working Group (SocialWG), a working group chartered to build the protocols and vocabularies needed to create a standard for social functionality. Shortly after, further development was moved to the Social Web Community Group (SocialCG), the successor to the SocialWG. == Design == ActivityPub uses the ActivityStreams 2.0 format for building its content, which itself uses JSON-LD. The three main data types used in ActivityPub are Objects, Activities and Actors. Objects are the most common data type, and can be images, videos, or more abstract items such as locations or events. Activities are actions that create and modify objects, for example a Create activity creates an object. Actors are representative of an individual, a group, an application or a service, and are the owners of objects. Every actor type contains an inbox and outbox stream, which sends and receives activities for a user. In order to publish data (for example liking an article), a user creates an activity that declares that they liked an Article object and publishes it to their outbox, where it is then delivered by the ActivityPub server via a POST request to the inboxes listed in the activity's to, bto, cc and bcc fields. The receiving servers then account for the newly received activity and update the article by adding the like action to it. === Example data === An example actor object that represents a user account: An example activity that likes an article object: An example article object: == Project status == The SocialCG previously organized a yearly free conference called ActivityPub Conf about the future of ActivityPub. Triages are held regularly to review issues pertaining to the ActivityPub and ActivityStreams 2.0 specifications as part of the SocialCG. In 2023, Germany's Sovereign Tech Fund donated €152,000 to socialweb.coop with the goal of building a new suite for testing various ActivityPub implementations and their compliance with the specification. === Adoption === The initial wave of adoption for ActivityPub (circa 2016–2018) came from software that was already using OStatus as their federation protocol, such as Mastodon, GNU social and Pleroma. Following the acquisition of Twitter by Elon Musk in 2022, many groups of users that were critical of the acquisition migrated to Mastodon, bringing new attention to the ActivityPub protocol with it. Various major social media platforms and corporations have since pledged to implement ActivityPub support, including Tumblr, Flipboard and Meta Platforms' Threads. Threads introduced crossposting to ActivityPub in 2024 for users outside of the European Economic Area, however full 2-way compatibility remains incomplete as of 2025. == Criticism == === Accidental denial-of-service attacks === Poorly optimized ActivityPub implementations can cause unintentional distributed denial-of-service (DDOS) attacks on other websites and servers, due to the decentralized nature of the network. An example would be Mastodon's implementation of OpenGraph link previews, wherein every instance that receives a post that contains a link with OpenGraph metadata will download the associated data, such as a thumbnail, in a very short timeframe, which can slow down or crash servers as a result of the sudden burst of requests. === Account migration === ActivityPub has been criticized for not natively supporting moving accounts from one server to another, forcing implementations to build their own solutions. While there has been work on building a standardized system for migrating accounts using the Move activity via the Fediverse Enhancement Proposal organization, the current proposal only allows for basic follower migration, with all other data remaining linked to the original account. === Missing content and data === ActivityPub implementations have been criticized for missing replies and parts of reply threads from remote posts, and presenting outdated statistics (e.g. likes and reposts) about remote posts. However, this isn't a problem with the ActivityPub protocol itself, but with implementations not refreshing their content for updated data when needed. == Software using ActivityPub == === Future implementations === Flarum, an internet forum software Forgejo, a Git forge and development platform === Uncertain future implementations === GitLab, a Git forge and development platform which had previously had an open issue discussing the topic, but was later closed due to the development team moving focus to other areas. Tumblr, a microblogging platform. Despite previous statements from Automattic CEO Matt Mullenweg, ActivityPub integration has been delayed indefinitely. The integration would have been implemented with its WordPress migration, as the first-party plugin for interoperability would have been used for federation. Flickr, an image and video hosting site.
Thinkfree Office
Thinkfree Office is a web-based commercial office productivity suite developed by South Korea-based Thinkfree Inc. It includes Word (a word processor), Spreadsheet (a spreadsheet) and Presentation (a presentation program). They are compatible with Microsoft Office's Word, PowerPoint, and Excel. It also features collaborative editing. The product is hosted on the client's server. == Supported file formats == Thinkfree Office supports ISO/IEC international standard ISO/IEC 26300 Open Document Format for Office Applications (odf, odt, odp, ods, odg). It also supports Microsoft's XML formats (docx, pptx, xlsx) and Microsoft's legacy binary formats (doc, ppt, xls). == Naming == The software was previously marketed under different names, such as Thinkfree Server, Thinkfree Online, Hancom Office Online, and Hancom Office Web. Eventually, the brand was consolidated under the name Thinkfree Office. == History == In June 2000, Thinkfree Inc. released Thinkfree Office, based in Silicon Valley, California. It is recognized as the world's first online office editor (predating Google Docs and Microsoft 365) and attracted significant media coverage, including reports on CNN. In 2001, Microsoft CEO Steve Ballmer highlighted Thinkfree as a significant competitor in a magazine interview, considering it a potential threat to his company, second only to Linux. In November 2003, Hancom, a South Korean office software company, signed a memorandum of understanding and subsequently acquired Thinkfree. In January 2004, Thinkfree expanded into other foreign markets. Subsidiary Haansoft USA, Inc. was created in San Jose, California to begin formal commercial operations in the US market. At the same time, a partnership was established with Riverdeep with the purpose of improving marketshare. In February 2004, expansion into the Japanese market began. A commercial agency agreement was signed with PSI in Shinjuku, Japan, which allowed for localized distribution. In addition, a global agreement was entered into with Yamada Denki, one of the three main computer distributors in Japan, for a total of 180,000 units. In May 2006, Thinkfree Office received the "Product of the Year" award at the Well-Connected Awards, USA. In January 2009, Thinkfree Mobile was launched at CES 2009 in Las Vegas. In April 2009, Thinkfree Live, Korea's first web office service, was launched. In June 2018, a partnership was formed with Amazon Web Services to integrate Thinkfree Office into WorkDocs, an in-house office suite. In October 2023, Hancom split its online office business unit as "Thinkfree Inc.".
Pandas (software)
Pandas (styled as pandas) is a software library written for the Python programming language for data manipulation and analysis. In particular, it offers data structures and operations for manipulating numerical tables and time series. It is free software released under the three-clause BSD license. The name is derived from the term "panel data", an econometrics term for data sets that include observations over multiple time periods for the same individuals, as well as a play on the phrase "Python data analysis". Wes McKinney started building what would become Pandas at AQR Capital while he was a researcher there from 2007 to 2010. The development of Pandas introduced into Python many comparable features of working with DataFrames that were established in the R programming language. The library is built upon another library, NumPy. == History == Developer Wes McKinney started working on Pandas in 2008 while at AQR Capital Management out of the need for a high performance, flexible tool to perform quantitative analysis on financial data. Before leaving AQR, he was able to convince management to allow him to open source the library in 2009. Another AQR employee, Chang She, joined the effort in 2012 as the second major contributor to the library. In 2015, Pandas signed on as a fiscally sponsored project of NumFOCUS, a 501(c)(3) nonprofit charity in the United States. == Data model == Pandas is built around data structures called Series and DataFrames. Data for these collections can be imported from various file formats such as comma-separated values, JSON, Parquet, SQL database tables or queries, and Microsoft Excel. === Series === A Series is a one-dimensional array-like object that stores a sequence of values together with an associated set of labels, called an index. It is built on top of NumPy's array and affords many similar functionalities, but instead of using implicit integer positions, a Series allows explicit index labels of many data types. A Series can be created from Python lists, dictionaries, or NumPy arrays. If no index is provided, pandas automatically assigns a default integer index ranging from 0 to n-1, where n is the number of items in the Series. A simple example with customized labels is: To access a value or list of values from a Series, use its index or list of indices: Series can be used arithmetically, as in the statement series_3 = series_1 + series_2. This will align data points with corresponding index values in series_1 and series_2 (similar to a join in relational algebra), then add them together to produce new values in series_3. A Series has various attributes, such as name (Series name), dtype (data type of values), shape (number of rows), values, and index. They can be used in many of the same operations as NumPy arrays, with additional methods for reindexing, label-based selection, and handling missing data. === DataFrame === A DataFrame is a two-dimensional, tabular data structure with labeled rows and columns. Each column is stored internally as a Series and may hold a different data type (numeric, string, boolean, etc.). DataFrames can be created by a variety of means, including dictionaries of lists, NumPy arrays, and external files such as CSV or Excel spreadsheets: To retrieve a DataFrame column as a Series, use either 1) the index (dict-like notation) or 2) the name of column if the name is a valid Python identifier (attribute-like access). DataFrames support operations such as column assignment, row and column deletion, label-based indexing with loc, position-based indexing with iloc, reshaping, grouping, and joining. Merge operations implement a subset of relational algebra and allow one-to-one, many-to-one, and many-to-many joins. Some common attributes of a DataFrame include dtypes (data type of each column), shape (dimensions of the DataFrame returned as a tuple with form (number of rows, number of columns)), index/columns (labels of the DataFrame's rows/columns, respectively, returned as an Index object), values (data in the DataFrame returned as a 2D array), and empty (returns True if the DataFrame is empty). === Index === Index objects hold metadata for Series and Dataframe objects, such as axis labels and names, and are automatically created from input data. By default, a pandas index is a series of integers ascending from 0, similar to the indices of Python arrays. However, indices can also use any NumPy data type, including floating point, timestamps, or strings. Indices are also immutable, which allows them to be safely shared across multiple objects. pandas' syntax for mapping index values to relevant data is the same syntax Python uses to map dictionary keys to values. For example, if s is a Series, s['a'] will return the data point at index a. Unlike dictionary keys, index values are not guaranteed to be unique. If a Series uses the index value a for multiple data points, then s['a'] will instead return a new Series containing all matching values. A DataFrame's column names are stored and implemented identically to an index. As such, a DataFrame can be thought of as having two indices: one column-based and one row-based. Because column names are stored as an index, these are not required to be unique. If data is a Series, then data['a'] returns all values with the index value of a. However, if data is a DataFrame, then data['a'] returns all values in the column(s) named a. To avoid this ambiguity, Pandas supports the syntax data.loc['a'] as an alternative way to filter using the index. Pandas also supports the syntax data.iloc[n], which always takes an integer n and returns the nth value, counting from 0. This allows a user to act as though the index is an array-like sequence of integers, regardless of how it is actually defined. pandas also supports hierarchical indices with multiple values per data point through the "MultiIndex" class. MultiIndex objects allow a single DataFrame to represent multiple dimensions, similar to a pivot table in Microsoft Excel, where each level can optionally carry its own unique name. In practice, data with more than 2 dimensions is often represented using DataFrames with hierarchical indices, instead of the higher-dimension Panel and Panel4D data structures. == Functionality == pandas supports a variety of indexing and subsetting techniques, allowing data to be selected by label, index, or Boolean conditions. For example, df[df['col1'] > 5] will return all rows in the DataFrame df for which the value of the column col1 exceeds 5. The library also implements grouping operations based on the split-apply-combine approach, enabling users to aggregate, transform, or restructure data according to column values or functions applied to index labels. For example, df['col1'].groupby(df['col2']) groups the data in 'col1' by their values in 'col2', while df.groupby(lambda i: i % 2) groups all data in the whole DataFrame by whether their index is even. The library also provides extensive tools for transforming, filtering and summarizing data. Users may apply arbitrary functions to Series and DataFrames, and because the library is built on top of Numpy, most NumPy functions can be applied directly to pandas objects as well. The library also includes built-in operations for arithmetic operations, string processing, and descriptive statistics such as mean, median, and standard deviation. These built-in functions are designed to handle missing data, usually represented by the floating-point value NaN. In addition, pandas includes tools for reorganizing data into different structural formats, with methods that can reshape tabular data between "wide" and "long" formats and pivot values based on column labels. pandas also implements a flexible set of relational operations for combining datasets. For instance, merge() links row in DataFrames based on one or more shared keys or indices, supporting one-to-one, one-to-many, and many-to-many relationships in a manner analogous to join operations in relational databases like SQL. DataFrames can also be concatenated or stacked together along an axis through the concat() method, and overlapping data can be further spliced together using combine_first() to fill in missing values. Furthermore, the library includes specialized support for working with time-series data. Features include the ability to interpolate values and filter using a range of timestamps, such as data['1/1/2023':'2/2/2023'] , which will return all dates between January 1 and February 2. Missing values in time-series data are represented by a dedicated NaT (Not a Timestamp) object, instead of the NaN value it uses elsewhere. == Criticisms == Pandas has been criticized for its inefficiency. The entire dataset must be loaded in RAM, and the library does not optimize query plans or support parallel computing across multiple cores. Wes McKinney, the creator of Pandas, has recommended Apache Arrow as an alternative to address these performance concerns and ot