AI Content Youtube Demonetized

AI Content Youtube Demonetized — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Zeuthen strategy

    Zeuthen strategy

    The Zeuthen strategy in cognitive science is a negotiation strategy used by some artificial agents. Its purpose is to measure the willingness to risk conflict. An agent will be more willing to risk conflict if it does not have much to lose in case that the negotiation fails. In contrast, an agent is less willing to risk conflict when it has more to lose. The value of a deal is expressed in its utility. An agent has much to lose when the difference between the utility of its current proposal and the conflict deal is high. When both agents use the monotonic concession protocol, the Zeuthen strategy leads them to agree upon a deal in the negotiation set. This set consists of all conflict free deals, which are individually rational and Pareto optimal, and the conflict deal, which maximizes the Nash product. The strategy was introduced in 1930 by the Danish economist Frederik Zeuthen. == Three key questions == The Zeuthen strategy answers three open questions that arise when using the monotonic concession protocol, namely: Which deal should be proposed at first? On any given round, who should concede? In case of a concession, how much should the agent concede? The answer to the first question is that any agent should start with its most preferred deal, because that deal has the highest utility for that agent. The second answer is that the agent with the smallest value of Risk(i,t) concedes, because the agent with the lowest utility for the conflict deal profits most from avoiding conflict. To the third question, the Zeuthen strategy suggests that the conceding agent should concede just enough raise its value of Risk(i,t) just above that of the other agent. This prevents the conceding agent to have to concede again in the next round. == Risk == Risk ( i , t ) = { 1 U i ( δ ( i , t ) ) = 0 U i ( δ ( i , t ) ) − U i ( δ ( j , t ) ) U i ( δ ( i , t ) ) otherwise {\displaystyle {\text{Risk}}(i,t)={\begin{cases}1&U_{i}(\delta (i,t))=0\\{\frac {U_{i}(\delta (i,t))-U_{i}(\delta (j,t))}{U_{i}(\delta (i,t))}}&{\text{otherwise}}\end{cases}}} Risk(i,t) is a measurement of agent i's willingness to risk conflict. The risk function formalizes the notion that an agent's willingness to risk conflict is the ratio of the utility that agent would lose by accepting the other agent's proposal to the utility that agent would lose by causing a conflict. Agent i is said to be using a rational negotiation strategy if at any step t + 1 that agent i sticks to his last proposal, Risk(i,t) > Risk(j,t). == Sufficient concession == If agent i makes a sufficient concession in the next step, then, assuming that agent j is using a rational negotiation strategy, if agent j does not concede in the next step, he must do so in the step after that. The set of all sufficient concessions of agent i at step t is denoted SC(i, t). == Minimal sufficient concession == δ ′ = arg ⁡ max δ ∈ S C ( A , t ) { U A ( δ ) } {\displaystyle \delta '=\arg \max _{\delta \in {SC(A,t)}}\{U_{A}(\delta )\}} is the minimal sufficient concession of agent A in step t. Agent A begins the negotiation by proposing δ ( A , 0 ) = arg ⁡ max δ ∈ N S U A ( δ ) {\displaystyle \delta (A,0)=\arg \max _{\delta \in {NS}}U_{A}(\delta )} and will make the minimal sufficient concession in step t + 1 if and only if Risk(A,t) ≤ Risk(B,t). Theorem If both agents are using Zeuthen strategies, then they will agree on δ = arg ⁡ max δ ′ ∈ N S { π ( δ ′ ) } , {\displaystyle \delta =\arg \max _{\delta '\in {NS}}\{\pi (\delta ')\},} that is, the deal which maximizes the Nash product. Proof Let δA = δ(A,t). Let δB = δ(B,t). According to the Zeuthen strategy, agent A will concede at step t {\displaystyle t} if and only if R i s k ( A , t ) ≤ R i s k ( B , t ) . {\displaystyle Risk(A,t)\leq Risk(B,t).} That is, if and only if U A ( δ A ) − U A ( δ B ) U A ( δ A ) ≤ U B ( δ B ) − U B ( δ A ) U B ( δ B ) {\displaystyle {\frac {U_{A}(\delta _{A})-U_{A}(\delta _{B})}{U_{A}(\delta _{A})}}\leq {\frac {U_{B}(\delta _{B})-U_{B}(\delta _{A})}{U_{B}(\delta _{B})}}} U B ( δ B ) ( U A ( δ A ) − U A ( δ B ) ) ≤ U A ( δ A ) ( U B ( δ B ) − U B ( δ A ) ) {\displaystyle U_{B}(\delta _{B})(U_{A}(\delta _{A})-U_{A}(\delta _{B}))\leq U_{A}(\delta _{A})(U_{B}(\delta _{B})-U_{B}(\delta _{A}))} U A ( δ A ) U B ( δ B ) − U A ( δ B ) U B ( δ B ) ≤ U A ( δ A ) U B ( δ B ) − U A ( δ A ) U B ( δ A ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{B})U_{B}(\delta _{B})\leq U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{A})U_{B}(\delta _{A})} − U A ( δ B ) U B ( δ B ) ≤ − U A ( δ A ) U B ( δ A ) {\displaystyle -U_{A}(\delta _{B})U_{B}(\delta _{B})\leq -U_{A}(\delta _{A})U_{B}(\delta _{A})} U A ( δ A ) U B ( δ A ) ≤ U A ( δ B ) U B ( δ B ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{A})\leq U_{A}(\delta _{B})U_{B}(\delta _{B})} π ( δ A ) ≤ π ( δ B ) {\displaystyle \pi (\delta _{A})\leq \pi (\delta _{B})} Thus, Agent A will concede if and only if δ A {\displaystyle \delta _{A}} does not yield the larger product of utilities. Therefore, the Zeuthen strategy guarantees a final agreement that maximizes the Nash Product.

    Read more →
  • MeituPic

    MeituPic

    Meitu Xiu Xiu ("Meitu") (Chinese: 美图秀秀) is an image editing software that is mostly used in Mainland China but is also popular in Hong Kong and Taiwan. It is only available on Google Play and App Store in certain countries. It provides tools for editing photos: filters, retouching, collage, scenes, frames, and photo decorations, as well as generative AI features such as text-to-images, AI removal and AI repainting etc. Meitu is one of the apps developed by Meitu, Inc.; it also produced BeautyCam, Wink and X-Design. == History == Meitu's PC version was created in 2008 by Wu Xinhong, the CEO of Meitu. In 2013, its mobile version became one of the first must-have mobile apps in China. Meitu, Inc. is a photo and video-centered app developer, which was founded in 2008 in Xiamen. Currently, the major revenue source of Meitu is premium subscription. Meitu, Inc. was initially funded by Cai Wensheng, a well-known angel investor. The company has an approximately 250 million monthly active users globally. == Function == === Edit === MeituPic provides a number of photo-editing tools. The major functions are auto enhance, edit, enhance, filters, frames, magic brush, mosaic, text, and blur. Auto enhance focuses on the nature of photos taken, while Edit includes functions of cropping, rotation, sharpening, and adjustment of ratio. For Enhance, users can apply slight adjustment on the photo by controlling the levels of brightness, contrast, colour temperature, saturation, highlight, shadow and smart light. Major types of filters are LOMO, beauty, style as well as art. Different frames can be chosen from poster, simple, and fantasy. Magic brush provides a great variety of brushes with different colours and patterns for users to decorate the photos. Mosaic brush enables users to cover certain parts of the photo. Texts can be added to the photo. Choices of different bubbles, font as well as style of words are available. Blurring effect is also available to make the photo less distinct and clear. === Beauty Retouch === There are seven major functions for retouching a photo: automatic retouch, smooth and whiten skin, remove blemish, make slimmer, remove dark circles and bags under the eyes, make taller, and enhance the eyes. Automatic retouch enhances portraits by lightening the skin tone, brightening the eyes, and simulating a face-lift by tapping on just one button. This helps to remove wrinkles and optimizes the skin tone. Acne, blemishes, and other skin imperfections can also be removed. The face-lift and weight-loss functions in the slimming option can be used to reshape the body. The option to make the subject taller can be used to change the perceived height of the subject and give the impression of slimmer, longer legs. The option to enhance the eyes can enlarge and brighten the eyes. === Collage === Collage has four types: template, freestyle, poster, PicStrip, which all maximize to insert nine photos. Template integrates photos in a vertical rectangle tightly. MeituPic has 15 frames or free download function for users. MeituPic also provides different templates according to number of photos inserted. Freestyle separates photos on a background freely. There are two parts of background: custom and more. For custom, users choose from album. For more, there are plain and picture with 18 choices. Poster makes a poster with photos. Users choose a poster among 8 choices or tap ‘more’ to download a new one. PicStrip combines photos vertically making an elongated file. Users choose a frame from 15 choices. Pinching thumb and forefinger together or apart zooms photos in/out. Putting two fingers and turning hand rotates photos. Pressing moves photos to ideal location. After designing, users tap ‘save/share’ on the upper right corner and the photo made is saved into album automatically. == Awards ==

    Read more →
  • Tea (app)

    Tea (app)

    Tea, officially Tea Dating Advice, is a dating surveillance mobile phone application that allows women to post personal data about men they are interested in or are currently dating. Founded by Sean Cook, the app rose to prominence in July 2025 after it was the subject of three major data leaks in July and August 2025. It was removed from Apple's App Store in October 2025, but remains available on the Google Play Store. == History == The app enables its users to upload, view, and comment on photos of men, check men's public records, and perform image searches. It also provides the ability to rate and review men, as well as a group chat function. The app uses artificial intelligence to verify that the user is a woman through facial analysis and other personal information to preserve the app as a women-only space. Users are required to submit their photo and an ID to access the app. The company that created the app was founded by businessman and tech capitalist Sean Cook, who stated in July 2025 that he was inspired to create the app because of his mother's experiences from online dating. According to the company, users remain anonymous, and the requirement to upload an ID was removed in 2023. An August 2025 investigation by 404 Media suggested that much of the information given by Cook on the historical background of the company was inaccurate. In July 2025, private messages, other personally identifying information, and approximately 72,000 images were leaked via 4chan. A further 1.1 million private messages were subsequently leaked using a separate security vulnerability; these included intimate conversations about controversial topics such as adultery and other forms of infidelity to their partners, discussions of abortion, phone numbers, meeting locations, and other confidential communications. The app's publishers subsequently revoked the ability to private message users in the app. Shortly after, the app was hidden from search on Android and an interactive, unverified map was also created of those in the files. By 7 August 2025, ten class action lawsuits had been filed. A further leak was reported later that month. Proponents have praised the app as an aid for women's safety by helping them check men for adultery, catfishing, criminal convictions and other "red flag" behaviors. Critics have described the app as a doxing tool and a violation of privacy, an opportunity for defamation against innocent individuals, and a witch hunt. Cook has stated that the company's legal team receives about three legal threats per day. Another mobile app, called TeaOnHer, was created in response of the app’s popularity. It was described as the male version of the Tea app. The app also reported a data breach in August 2025. In October 2025, Apple removed the app from their app store, telling journalists that the removal was due to a failure to meet company terms regarding content moderation and user privacy. Apple also mentioned an excessive amount of complaints, including allegations that the personal information of minors was being shared. The app remains on the Google Play Store.

    Read more →
  • RockMyRun

    RockMyRun

    Rock My Run (stylized as RockMyRun; trademarked slogan: "The Best Running Music in the World™") is a mobile running/fitness app founded in 2011 that provides running and workout music in the form of DJ mixes. It is owned by Rock My World, Inc., a health and fitness technology company based in San Diego, California. The app allows users to listen to these professional DJ mixes on their smartphone while running or working out to enhance and motivate their performance. Rock My World, Inc. also developed the app Jolt.ai for the software Slack. == History == During the early stages of the company, Rock My World, Inc. raised more than $2 million in funding generated by the Irvine Company's The Vine SD and from institutional investors including Skullcandy, ZTE and Lighter Capital and were admitted to the Plug and Play Tech Center in Sunnyvale and to the tech incubator EvoNexus in San Diego. In an interview with co-founder and ex-Qualcomm staff Adam Riggs-Zeigen, he said that "from the beginning [their] big goal is to help people live healthier lives." == Features == The RockMyRun app contains thousands of mixes or "stations" produced by its professional DJs intended to increase enjoyment and performance during exercise. DJs who have provided mixes for the app include David Guetta, Zedd, Steve Aoki, Major Lazer and Afrojack. All of the music can be personalized based on the user's steps per minute, heart rate or ideal cadence allowing the user to "always hear the right music at the right time at the right tempo". All RockMyRun mixes are organized into stations to help users discover music that suits their needs. RockMyRun contains mixes of all genres and each station is categorized into their respective genres and displays tags to let users know the type of music contained in the mix. RockMyRun has two membership types; it is free as a standard member, but for uninterrupted listening and additional features, users can upgrade to a paid "Rockstar" membership. Since March 2023, couples can now be on the same RockMyRun playlists and "share" earbuds. This allows people to train together, easier. A group of DJs curate playlists for specific training needs and different energy levels. == Reception == RockMyRun has been featured on television programs such as The Today Show on two occasions and on The Rachael Ray Show, and in positive reviews by many publications and websites including The New York Times on four separate occasions, TIME, The Huffington Post, The Denver Post, Men's Fitness, Real Simple, The Vulcan Post, The L.A. Times, Glamour, Paste magazine, PCMag, Dubai Week, BetaNews, CNET, CNBC, Reuters, Insider, Tom's Guide and Yahoo! Tech. RockMyRun has also been mentioned/recommended in books/publications such as A Practical Guide to Teacher Wellbeing by Elizabeth Holmes and Applying Music in Exercise and Sport by Dr. Costas Karageorghis. Ultimate Ears placed RockMyRun at the top of their list at No. 1 on their "5 Favorite Workout Music Apps". In a positive review by David Strausser for AndroidGuys in 2015, he praised the app in a detailed review, saying "The mixes are incredible and the rates are reasonable. The app is quick, beautiful." In 2015, Jill Duffy of PC Magazine gave a review of the app, pointing out its key features, and stating that the app is great if you enjoy listening to different, or new music, that can match your tempo while running. Also in 2015, Digital Trends listed RockMyRun, as one of the best exercise music apps in the article "No need to make exercise playlists with these music apps". In 2018, Redbull.com recommended RockMyRun in preparation for the Wings for Life World Run in their article "10 essential hacks for running to work to get you in World Run shape". In 2019, The Fashion Spot included RockMyRun in their list of "The Best Workout Apps for People Who Hate to Work Out", saying: "RockMyRun matches music to the tempo of your running pace – the music literally follows your steps/heart rate. The app has thousands of mixes/music options along with tracking capabilities." Also in 2019, MakeUseOf.com included RockMyRun in their list of "The 7 Best Running and Workout Music Apps". In September 2022, VeryWellFit listed RockMyRun as the first of three "Other Playlist Options" in the article "How to Create a Running Playlist, According to Running Coaches". Tech Grapple recommended the app in "The best workout free music apps for iPhone and Android" saying that "RockMyRun is the best application that you can use during workout. It comes with amazing DJs to craft mixes that will keep you moving." == Partners == RockMyRun is partnered with the following brands/companies: C25K Del Taco JLab Audio iFit Active Network, LLC Night Nation Run (the world's first running music festival) Lady Foot Locker Mayweather Boxing + Fitness Mio Global Orangetheory Fitness Red Rock Apps Tapout Fitness

    Read more →
  • Puck App

    Puck App

    Puck App is a mobile application that allows hockey players to quickly find and rent a hockey goalie. Founded in 2015 in Toronto, the application primarily operates throughout Canada. It is available on Apple's App Store and Google Play. == History == Puck App was founded in 2016 by Niki Sawni. Users can rate the goalies, message with available goalies, and coordinate skill levels. In 2017, Puck App expanded to Western Canada and has over 1,000 goalies registered. In 2018, Puck App charged approximately $40 CDN to rent a goalie with more than 2 hours notice. Previously, Puck App was a competitor to a similar application called GoalieUp. As of 2024, both companies have agreed to a merger deal.

    Read more →
  • Magiran

    Magiran

    Magiran (Persian: مگیران)—Iran's publications database—is a digital library that was founded in 2000 and includes digitized versions of scientific journals, which currently provides the possibility of searching among the full text of 1,500 journals. Registration is required for full access to the database, but access to some items such as newspapers is also possible without registration. A list of Iranian researchers is also maintained there.

    Read more →
  • Comparison of color models in computer graphics

    Comparison of color models in computer graphics

    This article provides introductory information about the RGB, HSV, and HSL color models from a computer graphics (web pages, images) perspective. An introduction to colors is also provided to support the main discussion. == Basics of color == === Primary colors and hue === First, "color" refers to the human brain's subjective interpretation of combinations of a narrow band of wavelengths of light. For this reason, the definition of "color" is not based on a strict set of physical phenomena. Therefore, even basic concepts like "primary colors" are not clearly defined. For example, traditional "Painter's Colors" use red, blue, and yellow as the primary colors, "Printer's Colors" use cyan, yellow, and magenta, and "Light Colors" use red, green, and blue. "Light colors", more formally known as additive colors, are formed by combining red, green, and blue light. This article refers to additive colors and refers to red, green, and blue as the primary colors. Hue is a term describing a pure color, that is, a color not modified by tinting or shading (see below). In additive colors, hues are formed by combining two primary colors. When two primary colors are combined in equal intensities, the result is a "secondary color". === Color wheel === A color wheel is a tool that provides a visual representation of the relationships between all possible hues. The primary colors are arranged around a circle at equal (120 degree) intervals. (Warning: Color wheels frequently depict "Painter's Colors" primary colors, which leads to a different set of hues than additive colors.) The illustration shows a simple color wheel based on the additive colors. Note that the position (top, right) of the starting color, typically red, is arbitrary, as is the order of green and blue (clockwise, counter-clockwise). The illustration also shows the secondary colors, yellow, cyan, and magenta, located halfway between (60 degrees) the primary colors. == Complementary color == The complement of a hue is the hue that is opposite it (180 degrees) on the color wheel. Using additive colors, mixing a hue and its complement in equal amounts produces white. === Tints and shades === The following discussion uses an illustration involving three projectors pointing to the same spot on a screen. Each projector is capable of generating one hue. The "intensities" of each projector are "matched" and can be equally adjusted from zero to full. (Note: "Intensity" is used here in the same sense as the RGB color model. The subject of matching, or "gamma correction", is beyond the level of this article.) A shade is produced by "dimming" a maximum chroma color. Painters refer to this as "adding black". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Dimming" is accomplished by decreasing each projector's intensity setting to the same fraction of its start setting. In the shade example, with any fully shaded hue, that all three projectors are set to zero intensity, resulting in black. A tint is produced by "lightening" a maximum chroma color. Painters refer to this as "adding white". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Lightening" is accomplished by increasing each projector's intensity setting by the same fraction from its start setting to full. In the tinting example, note that the third projector is now contributing. When the hue is fully lightened, all three projectors are each at full intensity, and the result is white. Note an attribute of the total intensity in the additive model. If full intensity for one projector is 1, then a primary color has a combined intensity of 1. A secondary color has a total intensity of 2. White has a total intensity of 3. Tinting, or "adding white", increases the total intensity of the hue. While this is simply a fact, the HSL model will take this fact into account in its design. === Tones === Tone is a general term, typically used by painters, to refer to the effects of reducing the "colorfulness" of a maximum chroma color; painters refer to it as "adding gray". Note that gray is not a color or even a single concept but refers to all the range of values between black and white where all three primary colors are equally represented. The general term is provided as more specific terms have conflicting definitions in different color models. Thus, shading takes a hue toward black, tinting takes a hue towards white, and tones cover the range between. == Choosing a color model == No one color model is necessarily "better" than another. Typically, the choice of a color model is dictated by external factors, such as a graphics tool or the need to specify colors according to the CSS2 or CSS3 standard. The following discussion only describes how the models function, centered on the concepts of hue, shade, tint, and tone. === RGB === The RGB model's approach to colors is important because: It directly reflects the physical properties of "Truecolor" displays As of 2011, most graphic cards define pixel values in terms of the colors red, green, and blue. The typical range of intensity values for each color, 0–255, is based on taking a binary number with 32 bits and breaking it up into four bytes of 8 bits each. 8 bits can hold a value from 0 to 255. The fourth byte is used to specify the "alpha", or the opacity, of the color. Opacity comes into play when layers with different colors are stacked. If the color in the top layer is less than fully opaque (alpha < 255), the color from underlying layers "shows through". In the RGB model, hues are represented by specifying one color as full intensity (255), a second color with a variable intensity, and the third color with no intensity (0). The following provides some examples using red as the full-intensity and green as the partial-intensity colors; blue is always zero: Shades are created by multiplying the intensity of each primary color by 1 minus the shade factor, in the range 0 to 1. A shade factor of 0 does nothing to the hue, a shade factor of 1 produces black: new intensity = current intensity (1 – shade factor) The following provides examples using orange: Tints are created by modifying each primary color as follows: the intensity is increased so that the difference between the intensity and full intensity (255) is decreased by the tint factor, in the range 0 to 1. A tint factor of 0 does nothing, a tint factor of 1 produces white: new intensity = current intensity + (255 – current intensity) tint factor The following provides examples using orange: Tones are created by applying both a shade and a tint. The order in which the two operations are performed does not matter, with the following restriction: when a tint operation is performed on a shade, the intensity of the dominant color becomes the "full intensity"; that is, the intensity value of the dominant color must be used in place of 255. The following provides examples using orange: === HSV === The HSV, or HSB, model describes colors in terms of hue, saturation, and value (brightness). Note that the range of values for each attribute is arbitrarily defined by various tools or standards. Be sure to determine the value ranges before attempting to interpret a value. Hue corresponds directly to the concept of hue in the Color Basics section. The advantages of using hue are The angular relationship between tones around the color circle is easily identified Shades, tints, and tones can be generated easily without affecting the hue Saturation corresponds directly to the concept of tint in the Color Basics section, except that full saturation produces no tint, while zero saturation produces white, a shade of gray, or black. Value corresponds directly to the concept of intensity in the Color Basics section. Pure colors are produced by specifying a hue with full saturation and value Shades are produced by specifying a hue with full saturation and less than full value Tints are produced by specifying a hue with less than full saturation and full value Tones are produced by specifying a hue and both less than full saturation and value White is produced by specifying zero saturation and full value, regardless of hue Black is produced by specifying zero value, regardless of hue or saturation Shades of gray are produced by specifying zero saturation and between zero and full value The advantage of HSV is that each of its attributes corresponds directly to the basic color concepts, which makes it conceptually simple. The perceived disadvantage of HSV is that the saturation attribute corresponds to tinting, so desaturated colors have increasing total intensity. For this reason, the CSS3 standard plans to support RGB and HSL but not HSV. === HSL === The HSL model describes colors in terms of hue, saturation, and lightness (also called luminance). (Note: the definition of sa

    Read more →
  • IEEE Transactions on Visualization and Computer Graphics

    IEEE Transactions on Visualization and Computer Graphics

    IEEE Transactions on Visualization and Computer Graphics is a peer-reviewed scientific journal published by the IEEE Computer Society. It covers subjects related to computer graphics and visualization techniques, systems, software, hardware, and user interface issues. TVCG has been considered the top journal in the field of visualization. Since 2011, TVCG has allowed authors to present recently accepted papers at partner conferences. These include: IEEE Visualization (VIS), including VAST, InfoVis, and SciVis. IEEE Virtual Reality Conference (IEEE VR) IEEE International Symposium on Mixed and Augmented Reality (ISMAR) ACM Symposium on Interactive 3D Graphics and Games (I3D) IEEE Pacific Visualization Conference (IEEE PacificVis) ACM SIGGRAPH/Eurographics Symposium on Computer Animation (SCA) Eurographics Symposium on Geometry Processing (SGP) Pacific Graphics Conference (PG) Eurovis - The EG and VGTC Conference on Visualization Graphics Interfaces (GI)

    Read more →
  • Educational robotics

    Educational robotics

    Educational robotics teaches the design, analysis, application and operation of robots. Robots include articulated robots, mobile robots or autonomous vehicles. Educational robotics can be taught from elementary school to graduate programs. Robotics may also be used to motivate and facilitate the instruction other, often foundational, topics such as computer programming, artificial intelligence or engineering design. == Education and training == Robotics engineers design robots, maintain them, develop new applications for them, and conduct research to expand the potential of robotics. Robots have become a popular educational tool in some middle and high schools, as well as in numerous youth summer camps, raising interest in programming, artificial intelligence and robotics among students. First-year computer science courses at several universities now include programming of a robot in addition to traditional software engineering-based coursework. == Category of Educational robotics == The categories of educational robots seen as having more than one category. It can be alienated into different categories based on their physical design and coding method. Generally they are categorised as arm robots, wheeled mobile robots and humanoid robots. Tangibly, coded robots uses a physical means of coding instead of the screens coding. === Initiatives in schools === Leachim, was a robot teacher programmed with the class curricular, as well as certain biographical information on the 40 students whom it was programmed to teach. Leachim could synthesize human speech using Diphone synthesis. It was invented by Michael J. Freeman in 1974 and was tested in a fourth grade classroom in the Bronx, New York. === Post-secondary degree programs === From approximately 1960 through 2005, robotics education at post-secondary institutions took place through elective courses, thesis experiences and design projects offered as part of degree programs in traditional academic disciplines, such as mechanical engineering, electrical engineering, industrial engineering or computer science. Since 2005, more universities have begun granting degrees in robotics as a discipline in its own right, often under the name "Robotic Engineering". Based on a 2015 web-based survey of robotics educators, the degree programs and their estimates annual graduates are listed alphabetically below. Note that only official degree programs where the word "robotics" appears on the transcript or diploma are listed here; whereas degree programs in traditional disciplines with course concentrations or thesis topics related to robotics are deliberately omitted. === Certification === The Robotics Certification Standards Alliance (RCSA) is an international robotics certification authority that confers various industry- and educational-related robotics certifications. === Summer robotics camp === Several summer camp programs include robotics as part of their core curriculum. In addition, youth summer robotics programs are frequently offered by celebrated museums such as the American Museum of Natural History and The Tech Museum of Innovation in Silicon Valley, CA, just to name a few. There are of benefits that come from attending robotics camps. It teaches students how to use teamwork, resilience and motivation, and decision-making. Students learn teamwork because most camps involve exciting activities requiring teamwork. Resilience and motivation is expected because by completing the challenging programs, students feel talented and accomplished after they complete the program. Also students are given unique situations making them make decisions to further their situation. === Educational robotics in special education === Educational robotics can be a useful tool in early and special education. According to a journal on new perspectives in science education, educational robotics can help to develop abilities that promote autonomy and assist their integration into society. Social and personal skills can also be developed through educational robotics. Using Lego Mindstorms NXT, schoolteachers were able to work with middle school aged children in order to develop programs and improve the children's social and personal skills. Additionally, problem solving skills and creativity were utilized through the creation of artwork and scenery to house the robots. Other studies show the benefits of educational robotics in special education as promoting superior cognitive functions, including executive functions. This can lead to an increased ability in "problem solving, reasoning and planning in typically developing preschool children." Through eight weeks of weekly forty-five-minute group sessions using the Bee-Bot, an increase in interest, attention, and interaction between both peers and adults was found in the school and preschool-aged children with Down Syndrome. This study suggests that educational robotics in the classroom can also lead to an improvement in visuo-spatial memory and mental planning. Furthermore, executive functions seemed to be possible in one child during this study.

    Read more →
  • Device-independent pixel

    Device-independent pixel

    A device-independent pixel (also: density-independent pixel, dip, dp) is a unit of length. A typical use is to allow mobile device software to scale the display of information and user interaction to different screen sizes. The abstraction allows an application to work in pixels as a measurement, while the underlying graphics system converts the abstract pixel measurements of the application into real pixel measurements appropriate to the particular device. For example, on the Android operating system a device-independent pixel is equivalent to one physical pixel on a 160 dpi screen, while the Windows Presentation Foundation specifies one device-independent pixel as equivalent to 1/96th of an inch. As dp is a physical unit it has an absolute value which can be measured in traditional units, e.g. for Android devices 1 dp equals 1/160 of inch or 0.15875 mm. While traditional pixels only refer to the display of information, device-independent pixels may also be used to measure user input such as input on a touch screen device.

    Read more →
  • Visual hull

    Visual hull

    A visual hull is a geometric entity created by shape-from-silhouette 3D reconstruction technique introduced by A. Laurentini. This technique assumes the foreground object in an image can be separated from the background. Under this assumption, the original image can be thresholded into a foreground/background binary image, which we call a silhouette image. The foreground mask, known as a silhouette, is the 2D projection of the corresponding 3D foreground object. Along with the camera viewing parameters, the silhouette defines a back-projected generalized cone that contains the actual object; this cone is called a silhouette cone. The intersection of the two silhouette cones defines a visual hull. which is a bounding geometry of the actual 3D object. When the reconstructed geometry is only used for rendering from a different viewpoint, the implicit reconstruction together with rendering can be done using graphics hardware. == In two dimensions == A technique used in some modern touchscreen devices employs cameras placed in the corners situated opposite infrared LEDs. The one-dimensional projection (shadow) of objects on the surface may be used to reconstruct the convex hull of the object. Visual hull generation method has also been used within experimental tele-meeting systems that aim to allow a user in a remote location to interact with virtual objects. The method uses multiple cameras to capture the real-world movements and interactions of the "sender", employing hardware-accelerated volumetric visual hull representation to create 3D volume from 2D multi-view images. Its ultimate aim is to allow 3D collaboration between the two users in the virtual realm, with the visual hull technique reducing the computational power required to allow this type of interaction and enabling the use of consumer goods such as the Wii Remote as a tool for interaction.

    Read more →
  • MetaMask

    MetaMask

    MetaMask is a software cryptocurrency wallet developed by ConsenSys for interacting with the Ethereum blockchain and other EVM-compatible networks. It enables users to manage Ethereum accounts and connect to decentralized applications (dApps) via a browser extension or mobile app. As of early 2026, MetaMask reports over 100 million users worldwide. == Overview == MetaMask allows users to store and manage private keys, send and receive Ethereum-based cryptocurrencies and tokens (including ERC-20 and ERC-721 standards), broadcast transactions, and interact with dApps. dApps connect to the wallet via JavaScript interfaces, prompting users to approve signatures or transactions. The wallet features MetaMask Swaps, an in-app token swap aggregator sourcing liquidity from multiple decentralized exchanges (DEXs), with a service fee of 0.875%. In 2025, MetaMask introduced the MetaMask Rewards program (initially mobile-only), where users earn points for activities such as swaps, bridging, and referrals. Season 1 (October 2025 – January 2026) distributed over $30 million in Linea tokens and other perks to participants. == History == MetaMask launched in 2016 as open-source software under the MIT license. It initially supported browser extensions for Chrome and Firefox. Mobile versions were in closed beta from 2019 and publicly released for iOS and Android in September 2020. In August 2020, the license changed to a custom proprietary one. MetaMask Swaps launched on desktop in October 2020 and on mobile in March 2021. The Rewards program launched in late 2025 with Linea integration. == Criticism == MetaMask has faced criticism over privacy, including default analytics settings that share some user data (which can be disabled). Its reliance on Infura (acquired by ConsenSys in 2019) has raised concerns about centralization in Ethereum infrastructure. The wallet regularly issues warnings about phishing scams and fake airdrops impersonating MetaMask.

    Read more →
  • Leakage (machine learning)

    Leakage (machine learning)

    In statistics and machine learning, leakage (also known as data leakage or target leakage) refers to the use of information during model training that would not be available at prediction time. This results in overly optimistic performance estimates, as the model appears to perform better during evaluation than it actually would in a production environment. Leakage is often subtle and indirect, making it difficult to detect and eliminate. It can lead a statistician or modeler to select a suboptimal model, which may be outperformed by a leakage-free alternative. == Leakage modes == Leakage can occur at multiple stages of the machine learning workflow. Broadly, its sources can be divided into two categories: those arising from features and those arising from training examples. === Feature leakage === Feature or column-wise leakage is caused by the inclusion of columns which are one of the following: a duplicate label, a proxy for the label, or the label itself. These features, known as anachronisms, will not be available when the model is used for predictions, and result in leakage if included when the model is trained. For example, including a "MonthlySalary" column when predicting "YearlySalary"; or "MinutesLate" when predicting "IsLate". === Training example leakage === Row-wise leakage is caused by improper sharing of information between rows of data. Types of row-wise leakage include: Premature featurization; leaking from premature featurization before Cross-validation/Train/Test split (must fit MinMax/ngrams/etc on only the train split, then transform the test set) Duplicate rows between train/validation/test (for example, oversampling a dataset to pad its size before splitting; or, different rotations/augmentations of a single image; bootstrap sampling before splitting; or duplicating rows to up sample the minority class) Non-independent and identically distributed random (non-IID) data Time leakage (for example, splitting a time-series dataset randomly instead of newer data in test set using a train/test split or rolling-origin cross-validation) Group leakage—not including a grouping split column (for example, Andrew Ng's group had 100k x-rays of 30k patients, meaning ~3 images per patient. The paper used random splitting instead of ensuring that all images of a patient were in the same split. Hence the model partially memorized the patients instead of learning to recognize pneumonia in chest x-rays.) A 2023 review found data leakage to be "a widespread failure mode in machine-learning (ML)-based science", having affected at least 294 academic publications across 17 disciplines, and causing a potential reproducibility crisis. == Detection == Data leakage in machine learning can be detected through various methods, focusing on performance analysis, feature examination, data auditing, and model behavior analysis. Performance-wise, unusually high accuracy or significant discrepancies between training and test results often indicate leakage. Inconsistent cross-validation outcomes may also signal issues. Feature examination involves scrutinizing feature importance rankings and ensuring temporal integrity in time series data. A thorough audit of the data pipeline is crucial, reviewing pre-processing steps, feature engineering, and data splitting processes. Detecting duplicate entries across dataset splits is also important. For language models, the Min-K% method can detect the presence of data in a pretraining dataset. It presents a sentence suspected to be present in the pretraining dataset, and computes the log-likelihood of each token, then compute the average of the lowest K of these. If this exceeds a threshold, then the sentence is likely present. This method is improved by comparing against a baseline of the mean and variance. Analyzing model behavior can reveal leakage. Models relying heavily on counter-intuitive features or showing unexpected prediction patterns warrant investigation. Performance degradation over time when tested on new data may suggest earlier inflated metrics due to leakage. Advanced techniques include backward feature elimination, where suspicious features are temporarily removed to observe performance changes. Using a separate hold-out dataset for final validation before deployment is advisable.

    Read more →
  • JotterPad

    JotterPad

    JotterPad is a text editor app for Android, developed by Two App Studio. It is proprietary software that uses the freemium pricing strategy. == Features == Jotterpad supports the markdown and fountain markup languages. Among its features are themes, synchronisation with Google Drive and Dropbox, dictionary and thesaurus, and snapshots. JotterPad uses a freemium pricing model, which means that a restricted version of the app is offered for free, while access to additional functionality requires payment. About half of the features are available in the free version. The synchronisation feature was originally limited to one account, and in Jotterpad 12 the option to synchronise using multiple accounts was added as a monthly subscription service.

    Read more →
  • MoFA Mitra

    MoFA Mitra

    MoFA Mitra is a mobile application launched by the Ministry of Foreign Affairs of Nepal to provide digital consular services, emergency support, rescue coordination, and complaint registration facilities for Nepali citizens living and working abroad. The application allows Nepali migrant workers, students, tourists, and Non-Resident Nepalis (NRNs) to access embassy services, emergency help, and official information directly from their smartphones. == Background == The need for a centralized digital support platform for Nepalis abroad had been discussed for several years due to increasing complaints related to labor exploitation, rescue delays, documentation problems, and lack of communication with Nepali diplomatic missions. Media organizations and migrant rights advocates had continuously highlighted issues faced by Nepali workers abroad, including human trafficking, fraudulent recruitment, delayed repatriation, and difficulties in receiving emergency assistance. In response, the Ministry of Foreign Affairs developed the MoFA Mitra app to digitize complaint handling, improve communication between embassies and citizens, and make emergency response faster and more accessible. == Features == The app includes several services and features for Nepali citizens abroad, including complaint registration, rescue coordination, embassy communication, and digital consular support services. Features of the application include: Online complaint registration Emergency rescue request system Direct contact with Nepali embassies and consulates Digital consular information Passport and document-related assistance Labor and migration support information Emergency hotline access Real-time notifications and alerts Location-based embassy information Tracking and coordination support for stranded citizens According to reports, the application was designed to simplify access to diplomatic services and strengthen emergency response coordination for Nepalis abroad. == Launch == The application was officially launched by Nepal’s Ministry of Foreign Affairs in Kathmandu in May 2026. Government officials stated that the app would strengthen Nepal’s digital governance system and improve support mechanisms for Nepali citizens residing overseas. Officials said the platform would help improve communication between Nepali diplomatic missions and citizens during emergencies and rescue operations. == Reception == The launch of the app received positive coverage from Nepali and international media outlets. Commentators described the initiative as a significant step toward modernization of Nepal’s diplomatic and consular services and digital governance infrastructure. Some observers also emphasized the importance of effective implementation, rapid response mechanisms, and continuous monitoring to ensure practical benefits for migrant workers abroad.

    Read more →