AI Content Understanding

AI Content Understanding — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Shadow and highlight enhancement

  Shadow and highlight enhancement refers to an image processing technique used to correct exposure. The use of this technique has been gaining popularity, making its way onto magazine covers, digital media, and photos. It is, however, considered by some to be akin to other destructive Photoshop filters, such as the Watercolor filter, or the Mosaic filter. == Shadow recovery == A conservative application of the shadow/highlight tool can be very useful in recovering shadows, though it tends to leave a telltale halo around the boundary between highlight and shadow if used incorrectly. A way to avoid this is to use the bracketing technique, although this usually requires a tripod. == Highlight recovery == Recovering highlights with this tool, however, has mixed results, especially when using it on images with skin in them, and often makes people look like they have been "sprayed with fake tan". == Shadow brightening - manual == One way to brighten shadows in image editing software such as GIMP or Adobe Photoshop is to duplicate the background layer, invert the copy and set the blend modes of that top layer to "Soft Light". You can also use an inverted black and white copy of the image as a mask on a brightening layer, such as Curves or Levels. == Shadow brightening - automatic == Several automatic computer image processing-based shadow recovery and dynamic range compression methods can yield a similar effect. Some of these methods include the retinex method and homomorphic range compression. The retinex method is based on work from 1963 by Edwin Land, the founder of Polaroid. Shadow enhancement can also be accomplished using adaptive image processing algorithms such as adaptive histogram equalization or contrast limiting adaptive histogram equalization (CLAHE).

  Read more →
• 

  Radar geo-warping

  Radar geo-warping is the adjustment of geo-referenced radar images and video data to be consistent with a geographical projection. This image warping avoids any restrictions when displaying it together with video from multiple radar sources or with other geographical data including scanned maps and satellite images which may be provided in a particular projection. There are many areas where geo warping has unique benefits: Single radar video signal displayed together with maps of different geographical projections. E.g. Mercator UTM stereographic Multiple radar video signals displayed simultaneously: Having the computing power to do so on one computer. Adapting the projection of all radar signals allowing the geographically correct display and accurate superimposition of those videos. Slant range correction: a modern 3D radar system can measure the height of a target and hence it is possible to correct the radar video by the real corrected range of the target. Slant Range Correction also allows to compensate the radar tower height e.g. for maritime surveillance radars. == Introduction == Radar video presents the echoes of electromagnetic waves a radar system has emitted and received as reflections afterwards. These echoes are typically presented on a computer screen with a color-coding scheme depicting the reflection strength. Two problems have to be solved during such a visualization process. The first problem arises from the fact that typically the radar antenna turns around its position and measures the reflection echo distances from its position in one direction. This effectively means that the radar video data are present in polar coordinates. In older systems the polar oriented picture has been displayed in so called plan position indicators (PPI). The PPI-scope uses a radial sweep pivoting about the center of the presentation. This results in a map-like picture of the area covered by the radar beam. A long-persistence screen is used so that the display remains visible until the sweep passes again. Bearing to the target is indicated by the target's angular position in relation to an imaginary line extending vertically from the sweep origin to the top of the scope. The top of the scope is either true north (when the indicator is operated in the true bearing mode) or ship's heading (when the indicator is operated in the relative bearing mode). For visualization on a modern computer screen the polar coordinates have to be converted into Cartesian coordinates. This process called radar scan conversion is presented with more detail in the next section. The second problem to solve arises from the fact that a radar system is placed in the real world and measures real world echo positions. These echoes have to be displayed together with other real world data like object positions, vector maps and satellite images in a consistent way. All this information refers to the curved earth surface but is displayed on a flat computer display. Building a link from real world earth positions to display pixels is commonly called geographical referencing or in short geo-referencing. Part of the geo-referencing process is to map the 3D earth surface onto a 2D display. This process of a geographical projection can be performed in many ways, but different data sources have their own 'natural' projection. E.g. Cartesian radar video data from a radar source on the earth surface are geo-referenced by a so-called radar projection. When using this radar projection the Cartesian radar video pixels can directly displayed on a computer screen (only being linearly transformed according to the current position on the screen and e.g. the current zoom level). A problem now arises if e.g. also a satellite map shall be shown together with the radar video data. The 'natural' geographical projection of a satellite image would be a satellite projection which depends on the satellite orbit, position and further parameters. Now either the satellite image has to be reprojected to a radar projection or the radar video has to use the satellite projection. This geographical re-projection is also called geographical warping or Geo Warping where each image pixel has to be transformed from one projection into another. This article describes in further detail the Geo Warping of radar video images in real time. It will also show that radar video Geo Warping is done most efficiently when it is integrated with the radar scan conversion process. == Radar-scan conversion == This section describes the principles of the radar-scan conversion (RSC) process. The radar supplies its measured data in polar coordinates (ρ,θ) directly from the rotating antenna. ρ defines the target/echo distance and θ the target angle in polar world coordinates. These data are measured, digitized and stored in a polar coordinate polar store or polar pixmap. The main RSC task is to convert these data to Cartesian (x, y) display coordinates, creating the necessary display pixels. The RSC process is influenced by the current zoom, shift and rotation settings defining which part of the 'world' shall be visible in the display image. As detailed later the RSC process also takes the currently used geographical projection into account when the radar video images are Geo Warped. The OpenGL RSC is implemented using a reverse scan conversion approach which calculates for every image pixel the most appropriate radar amplitude value in the polar store. This approach generates an optimal image without any artifacts known from forward spoke fill algorithms. By applying bi-linear filtering between adjacent pixels in the polar store during the conversion process the OpenGL RSC finally achieves a very high visual quality radar display image for every zoom level, creating smooth images of the radar echoes. == Radar projection == This section illustrates how radar video data are geo referenced and displayed on a computer screen. The radar sensor is positioned on the earth surface with a height h above the ground. It measures the direct distance d to the target (and not e.g. the distance the target is away from the radar if one would move on the earth surface). This distance is then used in the display plane after adjustment to the current display zoom level by the radar scan converter (RSC). Now it has to be clarified how the radar video data is geo referenced. This basically means, that if we want to display a geographical real world object (like e.g. a light house) which is at the same real world position as the radar target, that it also shall appear at the same position in the display plane. This is realized by calculating the distance from the radar sensor to the respective real world object and use that distance in the display plane. The position of the real world object is typically given in geographical coordinates (latitude, longitude and height above the earth surface). In other words, using a radar projection with geographical data is done by simulating a radar measurement process with the real world objects and use the resulting range and azimuth in the display plane. The second picture to the right shows an example radar projection with the center of projection (COP) at latitude 50.0° and longitude 0.0° which is also the radar position. The dashed lines are the equal-latitude and equal-longitude lines on top of the background map. The solid lines show equal-range and equal-azimuth with the respect to the radar position. It is a feature of the radar projection that equal-range lines are circles and equal-azimuth lines are straight lines. This is necessary to display radar video consistently with other map data when using a radar projection where the projection center has to be the radar position. == Geo Warping process == This section explains the actual geo warping or re-projection process when applied to radar video in real time. Assume we want to display radar video on top of a satellite image. As an example we use the CIB projection which is used to display satellite data in CIB (Controlled Image Base) format. The Figure Geo Warping Radar to CIB Projection shows dashed the maximal range circle for a range of 111 km or 60 miles using the radar projection. Such a range is typical for long range coastal surveillance radars. As stated in the last section this is a perfect circle also on the computer screen. The solid line ellipse shows the same range circle for the CIB projection. Typically the errors occurring without Geo Warping are smallest near the radar position if at least the projection center (COP) coincides with the radar position, as realized in our example. Otherwise the error distribution depends both on the used projection and also on the projection parameters. Thus, in our case the errors are most significant near the maximum radar range. The CIB projection error corrected in east–west direction at half the radar range is 2.6 km and is 5.3 km at the full radar range of 111 km. An error of 5.3 km is

  Read more →
• 

  Graphics suite

  A graphics suite is a software suite for graphics work that are distributed together. The programs are usually able to interact with each other on a higher level than the operating system would normally allow. There is no hard, fast rule regarding the programs to be included in a graphics application suite, but most will include at least a bitmap graphics editor and a vector graphics editor. In addition to these, the suite may contain VRML editors, animation editors, and morphing tools.

  Read more →
• 

  Fluency Voice Technology

  Fluency Voice Technology was a company that developed and sold packaged speech recognition solutions for use in call centers. Fluency's Speech Recognition solutions are used by call centers worldwide to improve customer service and significantly reduce costs and are available on-premises and hosted. == History == 1998 – Fluency was created as a spin-off from the Voice Research & Development team of a company called netdecisions. This R&D operation was established in Cambridge UK. The focus of the development was speech recognition systems based on the VXML standard. 2001 – Fluency became a separate entity in May 2001. Fluency began the creation of a software development platform specifically aimed at automating call center activities. This platform became Fluency's VoiceRunner. 2002 to 2004 – Fluency establishes accomplishes many successful deployments in customer sites such as National Express and Barclaycard. 2003 – Fluency expanded into the USA. Fluency also acquires Vocalis of Cambridge, UK in August 2003. 2004 – Fluency receives £6 million investment from leading European Venture Capitalists and establishes a global OEM partnership with Avaya, and the acquisition of SRC Telecom. 2008 – Fluency is acquired by Syntellect Ltd == Customers == Call Centers around the world use Fluency to improve service and reduce costs. They include Travelodge, Standard Life Bank, Sutton and East Surrey Water, Pizza Hut, CWT, Barclays, Powergen, First Choice, OutRight, J D Williams, Capital Blue Cross, Chelsea Building Society, EDF, bss, TV Licensing and Capita Software Services.

  Read more →
• 

  Separable filter

  A separable filter in image processing can be written as product of two more simple filters. Typically a 2-dimensional convolution operation is separated into two 1-dimensional filters. This reduces the computational costs on an N × M {\displaystyle N\times M} image with a m × n {\displaystyle m\times n} filter from O ( M ⋅ N ⋅ m ⋅ n ) {\displaystyle {\mathcal {O}}(M\cdot N\cdot m\cdot n)} down to O ( M ⋅ N ⋅ ( m + n ) ) {\displaystyle {\mathcal {O}}(M\cdot N\cdot (m+n))} . == Examples == 1. A two-dimensional smoothing filter: 1 3 [ 1 1 1 ] ∗ 1 3 [ 1 1 1 ] = 1 9 [ 1 1 1 1 1 1 1 1 1 ] {\displaystyle {\frac {1}{3}}{\begin{bmatrix}1\\1\\1\end{bmatrix}}{\frac {1}{3}}{\begin{bmatrix}1&1&1\end{bmatrix}}={\frac {1}{9}}{\begin{bmatrix}1&1&1\\1&1&1\\1&1&1\end{bmatrix}}} 2. Another two-dimensional smoothing filter with stronger weight in the middle: 1 4 [ 1 2 1 ] ∗ 1 4 [ 1 2 1 ] = 1 16 [ 1 2 1 2 4 2 1 2 1 ] {\displaystyle {\frac {1}{4}}{\begin{bmatrix}1\\2\\1\end{bmatrix}}{\frac {1}{4}}{\begin{bmatrix}1&2&1\end{bmatrix}}={\frac {1}{16}}{\begin{bmatrix}1&2&1\\2&4&2\\1&2&1\end{bmatrix}}} 3. The Sobel operator, used commonly for edge detection: [ 1 2 1 ] ∗ [ 1 0 − 1 ] = [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\begin{bmatrix}1\\2\\1\end{bmatrix}}{\begin{bmatrix}1&0&-1\end{bmatrix}}={\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} This works also for the Prewitt operator. In the examples, there is a cost of 3 multiply–accumulate operations for each vector which gives six total (horizontal and vertical). This is compared to the nine operations for the full 3x3 matrix. Another notable example of a separable filter is the Gaussian blur whose performance can be greatly improved the bigger the convolution window becomes.

  Read more →
• 

  Iterative reconstruction

  Iterative reconstruction refers to iterative algorithms used to reconstruct 2D and 3D images in certain imaging techniques. For example, in computed tomography an image must be reconstructed from projections of an object. Here, iterative reconstruction techniques are usually a better, but computationally more expensive alternative to the common filtered back projection (FBP) method, which directly calculates the image in a single reconstruction step. In recent research works, scientists have shown that extremely fast computations and massive parallelism is possible for iterative reconstruction, which makes iterative reconstruction practical for commercialization. == Basic concepts == The reconstruction of an image from the acquired data is an inverse problem. Often, it is not possible to exactly solve the inverse problem directly. In this case, a direct algorithm has to approximate the solution, which might cause visible reconstruction artifacts in the image. Iterative algorithms approach the correct solution using multiple iteration steps, which allows to obtain a better reconstruction at the cost of a higher computation time. There are a large variety of algorithms, but each starts with an assumed image, computes projections from the image, compares the original projection data and updates the image based upon the difference between the calculated and the actual projections. === Algebraic reconstruction === The Algebraic Reconstruction Technique (ART) was the first iterative reconstruction technique used for computed tomography by Hounsfield. === Iterative Sparse Asymptotic Minimum Variance === The iterative sparse asymptotic minimum variance algorithm is an iterative, parameter-free superresolution tomographic reconstruction method inspired by compressed sensing, with applications in synthetic-aperture radar, computed tomography scan, and magnetic resonance imaging (MRI). === Statistical reconstruction === There are typically five components to statistical iterative image reconstruction algorithms, e.g. An object model that expresses the unknown continuous-space function f ( r ) {\displaystyle f(r)} that is to be reconstructed in terms of a finite series with unknown coefficients that must be estimated from the data. A system model that relates the unknown object to the "ideal" measurements that would be recorded in the absence of measurement noise. Often this is a linear model of the form A x + ϵ {\displaystyle \mathbf {A} x+\epsilon } , where ϵ {\displaystyle \epsilon } represents the noise. A statistical model that describes how the noisy measurements vary around their ideal values. Often Gaussian noise or Poisson statistics are assumed. Because Poisson statistics are closer to reality, it is more widely used. A cost function that is to be minimized to estimate the image coefficient vector. Often this cost function includes some form of regularization. Sometimes the regularization is based on Markov random fields. An algorithm, usually iterative, for minimizing the cost function, including some initial estimate of the image and some stopping criterion for terminating the iterations. === Learned Iterative Reconstruction === In learned iterative reconstruction, the updating algorithm is learned from training data using techniques from machine learning such as convolutional neural networks, while still incorporating the image formation model. This typically gives faster and higher quality reconstructions and has been applied to CT and MRI reconstruction. == Advantages == The advantages of the iterative approach include improved insensitivity to noise and capability of reconstructing an optimal image in the case of incomplete data. The method has been applied in emission tomography modalities like SPECT and PET, where there is significant attenuation along ray paths and noise statistics are relatively poor. Statistical, likelihood-based approaches: Statistical, likelihood-based iterative expectation-maximization algorithms are now the preferred method of reconstruction. Such algorithms compute estimates of the likely distribution of annihilation events that led to the measured data, based on statistical principle, often providing better noise profiles and resistance to the streak artifacts common with FBP. Since the density of radioactive tracer is a function in a function space, therefore of extremely high-dimensions, methods which regularize the maximum-likelihood solution turning it towards penalized or maximum a-posteriori methods can have significant advantages for low counts. Examples such as Ulf Grenander's Sieve estimator or Bayes penalty methods, or via I.J. Good's roughness method may yield superior performance to expectation-maximization-based methods which involve a Poisson likelihood function only. As another example, it is considered superior when one does not have a large set of projections available, when the projections are not distributed uniformly in angle, or when the projections are sparse or missing at certain orientations. These scenarios may occur in intraoperative CT, in cardiac CT, or when metal artifacts require the exclusion of some portions of the projection data. In Magnetic Resonance Imaging it can be used to reconstruct images from data acquired with multiple receive coils and with sampling patterns different from the conventional Cartesian grid and allows the use of improved regularization techniques (e.g. total variation) or an extended modeling of physical processes to improve the reconstruction. For example, with iterative algorithms it is possible to reconstruct images from data acquired in a very short time as required for real-time MRI (rt-MRI). In Cryo Electron Tomography, where the limited number of projections are acquired due to the hardware limitations and to avoid the biological specimen damage, it can be used along with compressive sensing techniques or regularization functions (e.g. Huber function) to improve the reconstruction for better interpretation. Here is an example that illustrates the benefits of iterative image reconstruction for cardiac MRI.

  Read more →
• 

  Eat App

  Eat App is a global restaurant technology company that provides a cloud-based management platform for restaurants, hotels, and other venues. The platform enables venues to accept online reservations seamlessly, manage tables, and enhance customer relationship management (CRM). It utilizes AI to improve operational efficiency, provides marketing automation, and helps build a comprehensive guestbook. The company also offers a consumer app and website for discovering and booking restaurant tables online. According to the company, the system has seated over 100 million guests, and the number continues to grow. Eat was founded by Nezar Kadhem and David Feuillard in 2015 and has raised $13M to date from Silicon Valley's 500 startups, Middle East Venture Partners (MEVP), Derayah VC, amongst other business angels. The company is currently operational across the world, with offices in Dubai and the United States. == Product overview == === For restaurants === Eat App’s reservation system allows for a digital record of all reservations, all guests that have previously visited the restaurant, as well as analytics on the performance of the restaurant. The table management feature simplifies traditional restaurant operations by providing a live snapshot of current status, seating optimization, and shift management. The CRM and analytics suite gathers and monitors data to build a segmented guestbook for personalized marketing and provides dashboards for data-driven decision-making. Additionally, the review feature makes it easy for restaurants to automatically collect reviews from their guests. Additionally, Eat App includes a chit printer function that seamlessly prints reservation details at host stands and a review management feature that allows restaurants to manage online reviews directly within the platform. == History == In February 2015, Eat App raised $300k from Bahrain-based business angel group TENMOU. In June 2018, Eat raised $1.2 million from Dubai-based Middle East Venture Partners (MEVP). In February 2020, Eat App raised $5 million in a Series B funding round led by 500 Startups, Derayah Venture Fund, and MEVP, with participation from a few angel investors and family members. In February 2021, Eat App launched its technology with The Emaar Hospitality Group, implementing it across over 50 restaurants in Emaar properties and hotels. The cloud-based system runs natively on iPads in each restaurant, providing Emaar staff access to reservations and guest information, and integrates with the U by Emaar loyalty app to personalize service. On September 28, 2022, Eat App announced the closing of an $11 million Series B funding round. The investment was led by Middle East Venture Partners (MEVP), 500 Startups, Derayah Venture Capital, Dallah Albaraka, Ali Zaid Al Quraishi & Brothers Company, and Rasameel Investment Company, with participation from existing investors.

  Read more →
• 

  Light scanning photomacrography

  Light Scanning Photomacrography (LSP), also known as Scanning Light Photomacrography (SLP) or Deep-Field Photomacrography, is a photographic film technique that allows for high magnification light imaging with exceptional depth of field (DOF). This method overcomes the limitations of conventional macro photography, which typically only keeps a portion of the subject in acceptable focus at high magnifications. == Historical background == The principles of LSP were first documented in the early 1960s by Dan McLachlan Jr., who highlighted its capability for extreme focal depth in microscopy and in 1968 patented the process. The technique was revived and further developed in the 1980s by photographers such as Darwin Dale and Nile Root, a faculty member at the Rochester Institute of Technology. In the early 1990s, William Sharp and Charles Kazilek, both researchers at Arizona State University, also published articles describing their technique and system setup for capturing SLP images. == Predecessor to stack image photography == Light Scanning Photomacrography offered a powerful analog tool for high-detail imaging in the age of film photography. It provided a comprehensive depth of field, making it invaluable in scientific and biomedical photography. As technology and techniques continue to evolve, LSP has been replaced by digital image focus stacking. This technique uses a collection of images captured in series at different focal depths, which are then processed using computer software to create a single image with a greater focus depth than any single image. == LSP technique and results == LSP involves the use of a thin plane of light that scans across the subject, which is mounted on a stage moving perpendicular to the film plane. The technique utilizes traditional optics and is governed by the physical laws of depth of field. By moving the subject through a narrow band of illumination, the entire subject can be recorded in sharp focus from the nearest details to the farthest ones. This analog process produces sharp and detailed images by slowly recording the image on film as the specimen passes through the sheet of light that is thinner than the effective DOF. Because the image is captured at the same relative distance from the camera lens, the resulting images are axonometric rather than perspective projection, which is what the human eye sees and is typically captured by a film camera. Because all parts of an LSP image are captured at the same distance from the lens, relative measurements can be taken from an LSP photograph and can be used for comparison. == Equipment and setup == A typical LSP setup includes: A stage that can move the subject perpendicular to the film plane. Light sources, in some cases modified projectors, are used to project a thin plane of light. A camera mounted on a stable stand such as a tabletop copy stand. In 1991, Sharp and Kazilek described their SLP system that used three Kodak Ektagraphic slide projectors with zoom lenses to create a thin plane of light. The projectors each had a slide mount with two razor blades placed edge-to-edge to create a thin slit for the light to pass through. The image was captured using a Nikon FE-2 SLR camera mounted above the specimen. Kodachrome 25 slide film was used to record the image and to minimize film grain size and maximize image sharpness == Commercial systems == A commercial SLP instrument was produced by the Irvine Optical Corp. Their DYNAPHOT system was based on a photomacroscope and could capture images on 4x5 film. The instrument came with two or three illumination sources and a motorized specimen stage. The system advertised a 2X – 40X magnification range and the ability to capture images in black and white and color. Other systems have been developed by Nile Root and Theodore Clarke and reported higher magnification (up to 100X). == LSP process == Alignment and Focusing: The light sources are aligned and focused to project a thin, consistent plane of light across the subject. Stage Movement: The subject stage moves at a controlled speed, scanning through the plane of light. Image Capture: The camera shutter is set to a long exposure or can be opened and closed manually. As the subject moves through the illuminated plane, it is recorded on the film. This process is very much like painting an image onto the film using photons instead of paint. == Applications == LSP was particularly useful in biomedical photography, where it was used to document magnified subjects with increased depth of field over traditional macro and micro photography. It has been employed to capture detailed images of biological specimens, such as imaging small insects and their parts. SLP has been used to document shell collections for scientific documentation and research. Other applications include forensic science, mineralogy, and the imaging of fractured surfaces and parts == Advantages and challenges of LSP imaging == === Advantages === Exceptional depth of field: Subjects are rendered in sharp focus throughout. High magnification: Detailed images at significant magnification without sacrificing DOF. Analog precision: Provides a non-digital solution with accurate image representation. Versatility: Can be used for a range of subject sizes, from macro to non-macro scales. === Challenges === Technical complexity: Requires precise setup and alignment. Exposure time: Typically requires long exposure times due to the scanning process. Contrast control: The highly directional lighting can create harsh shadows and high contrast, which may need to be managed. Digital competition: Focus stacking has largely replaced LSP in the digital era due to convenience and flexibility. == DIY contributions == Enthusiasts and researchers have contributed to the development and accessibility of LSP by creating and sharing DIY guides. These contributions have enabled others to build their own LSP systems using readily available materials and components. Nile Root's publications provide detailed instructions and recommendations for constructing an LSP setup. These DIY systems have allowed a wider audience to explore and utilize the benefits of LSP imaging in various fields.

  Read more →
• 

  Cooliris (plugin)

  Cooliris (for Desktop), formerly known as PicLens, was a web browser extension developed by Cooliris, Inc, and later acquired by Yahoo. The plugin provides an interactive 3D-like experience for viewing digital images and videos from the web and from desktop applications. The software places a small icon atop image thumbnails that appear on a webpage. Clicking on the icon loads the Cooliris 3D Wall, a browsing environment that gives the user the effect of flying through a three-dimensional space. Released to the public in January 2008, The New York Times described Cooliris as the "new immersive approach to Web navigation". Cooliris went out to win the 2008 Crunchies Award for Best Design. The plugin has received over 50 million downloads. As of May 2014 browser plugins are unavailable from the official website. There are only links to tablet apps - for iOS and Android.

  Read more →
• 

  Odor source localization

  Odor source localization (OSL) is the problem of locating the origin of an airborne or waterborne chemical plume using one or more mobile sensors, typically robots equipped with chemical sensors. The task sits at the intersection of robotics, fluid dynamics and machine olfaction. Chemical plumes in turbulent flows are intermittent and patchy, and most chemical sensors respond slowly and have limited selectivity, so the instantaneous reading available to a moving sensor is a poor proxy for the underlying time-averaged concentration field. Robotic OSL has been studied since the late 1980s and has applications including the detection of gas leaks, search and rescue after industrial accidents, and environmental monitoring of industrial emissions. == History == Robotic odor search emerged in the late 1980s and 1990s, drawing on earlier work in chemical ecology that had described how moths and other insects locate distant pheromone sources. R. A. Russell at Monash University was among the first to build mobile robots that followed chemical trails on the floor and tracked airborne odor plumes. Distributed and multi-robot odor search were investigated by Hayes, Martinoli and Goodman at the California Institute of Technology and EPFL, who studied cooperative plume-tracing on simulated and physical robot swarms. In 2007 Vergassola, Villermaux and Shraiman introduced infotaxis, an information-theoretic search strategy in which a sensor moves so as to maximize the expected information gain about source location, rather than following a chemical concentration gradient; the paper appeared in Nature and prompted substantial follow-up work in the robotics community. From the mid-2010s, multi-rotor unmanned aerial vehicles carrying lightweight chemical sensors became a common experimental platform for OSL research. == Problem formulation == OSL is generally decomposed into three sub-problems: plume detection (deciding whether a chemical signal is present), plume traversal (moving so as to remain in contact with the plume), and source declaration (deciding when the source has been reached). The mathematical difficulty depends strongly on the assumed dispersion model. In laminar or low-Reynolds number flows a Gaussian advection–diffusion model gives a smooth concentration field with a well-defined gradient. In turbulent flows, which dominate most realistic environments, the plume is filamentary: the sensor receives short, randomly spaced bursts of chemical separated by periods of zero signal, and the time-averaged field is not a useful guide on the time scales at which a robot must act. Source-term estimation, surveyed by Hutchinson and colleagues, additionally aims to recover both the position and the release rate of the source from the observed concentrations, often using probabilistic filters. == Biological inspiration == Many OSL strategies are explicitly modeled on the behavior of male moths flying upwind toward a pheromone source. As reviewed by Cardé and Willis, moths combine an upwind surge whenever they detect a filament of pheromone with a wider crosswind cast when contact is lost, producing a characteristic zig-zag trajectory that has been transposed onto mobile robots by several groups. Other biological models draw on the search behavior of dogs and of marine animals such as blue crabs and lobsters, which integrate chemical and bilateral hydrodynamic cues over much shorter ranges. == Algorithms and strategies == === Reactive strategies === Reactive strategies select the next motion as a direct function of the current sensor reading. Chemotaxis steers along the locally estimated concentration gradient, which is effective in laminar plumes but degrades severely in turbulence. Anemotaxis exploits a measured wind direction by surging upwind when chemical contact is made. The bio-inspired cast-and-surge family combines anemotaxis with a deterministic crosswind cast on contact loss, and is the dominant reactive approach for turbulent environments. === Probabilistic and information-theoretic strategies === Probabilistic methods maintain a posterior distribution over possible source locations and choose actions that improve that distribution. The infotaxis strategy of Vergassola, Villermaux and Shraiman selects the move that maximizes the expected reduction in entropy of the source-location posterior, and is effective in regimes where the spatial gradient is unusable. Bayesian source-term estimation extends this idea by inferring both source position and release rate, typically using particle filters or sequential Monte Carlo. === Map-based strategies === Map-based methods build a spatial model of the time-averaged gas distribution from sensor readings collected along the robot's trajectory and search for local maxima in that model. Lilienthal and colleagues describe a family of kernel-based gas distribution mapping techniques in which point measurements are convolved with a Gaussian kernel to produce a spatially extrapolated estimate. Such methods are most useful when the source can be assumed quasi-stationary and the robot is able to revisit locations. === Multi-robot and swarm strategies === Multiple robots searching cooperatively can shorten search times. Cooperative formations spread the sensors across the crosswind axis, making detection of an intermittent plume more likely. Swarm-based approaches, reviewed by Wang and colleagues, deploy larger numbers of simpler agents and rely on collective behavior rather than centralized planning; reported advantages include improved coverage of the search area and the possibility of locating multiple sources in parallel. == Sensors and platforms == Most OSL systems use metal-oxide semiconductor (MOX) sensors, photoionization detectors or electrochemical cells, which trade off sensitivity, selectivity, response time and power consumption. Ishida and colleagues describe how these sensors interact with airflow around the robot body, an effect that motivates careful aerodynamic design and active sampling. Mobile platforms include wheeled ground robots for indoor and structured outdoor environments, multi-rotor unmanned aerial vehicles for open spaces and elevated sources, and autonomous underwater vehicles for chemical plumes in the marine environment. == Notable systems == Among the early demonstrations, R. A. Russell's series of differential-drive robots at Monash University localized volatile sources in still and ventilated rooms during the 1990s. The Smelling Nano Aerial Vehicle reported by Burgués and colleagues used a Crazyflie nano-quadcopter (approximately 27 grams in mass and 10 cm across) carrying a custom MOX gas sensing board, and built three-dimensional gas distribution maps of indoor releases from sweeping flights of less than three minutes. The GADEN simulator, released by Monroy and colleagues, couples three-dimensional dispersion computed from an OpenFOAM CFD solver with models of MOX and photo-ionization gas sensors, and is widely used to test mobile-robot olfaction algorithms in simulation. == Applications == Reported applications include the localization of natural-gas and methane leaks in urban infrastructure, search for chemical contamination after industrial accidents, search and rescue, and environmental monitoring of industrial emissions. Drug- and explosives-detection robots are an adjacent application area, although these typically rely on close-range sniffing rather than long-range plume tracking. == Open challenges == Open challenges identified in recent reviews include the limited speed, selectivity and stability of available chemical sensors; the scarcity of standardized, large-scale benchmarks comparable to those available in computer vision; reliable handling of multi-source environments, where standard single-source assumptions fail; and the integration of OSL with other autonomous-vehicle subsystems such as obstacle avoidance and navigation in three-dimensional turbulent flow.

  Read more →
• 

  Dating app

  An online dating application, commonly known as a dating app, is an online dating service presented through a mobile phone application. These apps often take advantage of a smartphone's GPS location capabilities, always on-hand presence, and access to mobile wallets. These apps aim to speed up the online dating process of sifting through potential dating partners, chatting, flirting, and potentially meeting or becoming romantically involved. Online dating apps are now mainstream in the United States. As of 2017, online dating (which included both apps and other online dating services) was the principal method by which new couples in the U.S. met. The percentage of couples meeting online is predicted to increase to 70% by 2040. == Origins == The first computerized dating service was launched in 1964, the St. James Computer Dating Service, which became known as Com-Pat. The first U.S. dating service that used computerized match making was Operation Match. It required men and women to complete a questionnaire and was launched in 1965. Operation Match inspired the methodology of Dateline, which became popular in the 1970s and 1980s. Match.com was launched in 1995 and turned computerized match making into a profitable business. Grindr targeted gay and bisexual men at launch. Tinder, launched in 2012, led to a growth of online dating applications by both new providers and existing online dating services that expanded into the mobile app market. == Usage by demographic group == Online dating applications typically target a younger demographic group, though some apps, like Senior Match and Silver Singles are geared toward the 50 and up demographic. In 2016, almost 50% of people knew of someone who use the services or had met their loved one through the service. After the iPhone launch in 2007, online dating data has mushroomed as application usage increased. In 2005, only 10% of 18-24 year olds reported to have used online dating services; this number quickly grew to over 27%, making this target demographic the largest number of users for most applications. When Pew Research Center conducted a study in 2016, they found that 59% of U.S. adults agreed that online dating is a good way to meet people compared to 44% in 2005. This explosion in usage can be explained by the increased use of smartphones. By the end of 2022, it is expected there will be 413 million active users of online dating services worldwide. A 2023 Pew Research Center survey of 6,034 American adults found that 30% had ever used an online dating site or app, including 53% of those aged 18 to 29, 37% of those aged 30 to 49, and 17% of those aged 50 and over. Lesbian, gay and bisexual respondents reported using dating apps at nearly twice the rate of straight respondents (51% versus 28%), and 36% of divorced, separated or widowed adults had used one, compared with 16% of married adults. The increased use of smartphones by those 65 and older has also driven that population to the use dating apps. The Pew Research Center found that usage increase by 8 points since last surveyed in 2012. A study in 2021 found that more than one-third of seniors have dated in the past 5 years, and roughly one-third of those dating seniors have turned to dating apps. During the COVID-19 pandemic, Morning Consult found that more Americans were using online dating apps than ever before. In one survey in April 2020, the company discovered that 53% of U.S. adults who use online dating apps have been using them more during the pandemic. As of February 2021, that share increased to 71 percent. Research using Hofstede's cultural dimensions theory has indicated that norms about online dating applications tend to differ across cultures. A study published in the Journal of Creative Communications looked into the relationships between dating-app advertisements from over 51 countries and the cultural dimensions of these countries. The results revealed that dating-app advertisements appealed to multiple cultural needs, including the needs for relationships, friendship, entertainment, sex, status, design and identity. The use of these appeals was found to be 'congruent with ... the individualism/collectivism and uncertainty avoidance cultural dimensions.' == Popular applications == Following Tinder's success, other companies released dating applications. Raya was released in 2015 as a membership-based dating app, allowing entrance only through referrals, which was marketed as a dating app for celebrities. In early 2026, Hily surpassed Bumble to become the third most-used dating application in the United States and the fifth highest-grossing overall, driven largely by growing popularity among Generation Z users, while remaining behind Tinder and Hinge, both owned by Match Group. A number of dating apps have been created targeting adherents of particular religions seeking partners of the same religion, such as Muzmatch for Muslims, Christian Mingle, SALT, and Christian Connection for Christians, and JSwipe and JDate for Jews. === VR Dating === VR Dating is an application of Social VR where people can exist, collaborate, and perform various activities together. Virtual reality apps use virtual and augmented realities to make the dating experience more lifelike and more effective, as well as allow people to expand what is already possible in the world of online dating. There are several online platforms of VR Dating. The VR dating app Nevermet is the VR equivalent of Tinder, where people can search and find on dates. However, instead of actual real-life pictures, users will update pictures of virtual selves and will be interacting with avatars rather than real faces. Flirtual is a self-contained social VR app that serves to match users who then decide where and how to meet in VR. Flirtual hosts speed dating and social events in VR. == Effects on dating == The usage of online dating applications can have both advantages and disadvantages: === Advantages === Many of the applications provide personality tests for matching or use algorithms to match users. These factors enhance the possibility of users getting matched with a compatible candidate. Users are in control; they are provided with many options so there are enough matches that fit their particular type. Users can simply choose to not match the candidates that they know they are not interested in. Narrowing down options is easy. Once users think they are interested, they are able to chat and get to know the potential candidate. This form of communication can reduce the time, cost, and uncertainty often associated with traditional dating methods. Online dating offers convenience; people want dating to work around their schedules. Online dating can also increase self-confidence; even if users get rejected, they know there are hundreds of other candidates that will want to match with them so they can simply move on to the next option. In fact, 60% of U.S. adults agree that online dating is a good way to meet people and 66% say they have gone on a real date with someone they met through an application. Today, 5% of married Americans or Americans in serious relationships said they met their significant other online. The 39% of online dating users (representing 12% of all U.S. adults) say they have been in a committed relationship or married someone they met on a dating site or app. ==== Rejection sensitive individuals ==== Individuals high in rejection sensitivity are more likely to use online dating applications. As they tend to expect, perceive and overreact to rejection, rejection sensitive individuals struggle with traditional dating. Online dating applications allow for them to better reveal their true selves, potentially increasing their dating success. Online dating applications also obscure rejection cues, alleviating the rejection-related distress experienced by rejection sensitive individuals. ==== Anxiously attached individuals ==== Individuals high in attachment anxiety are also more likely to use online dating applications. While they harbour negative self-views, anxiously attached individuals are also more eager to enter and commit to relationships. Online dating applications allow for them to present "an authentic yet ideal version of themselves", mitigating their tendencies to view themselves as undesirable. This increases their romantic confidence, and potentially alleviates their anxiety when searching for a romantic partner. === Disadvantages === Sometimes having too many options can be overwhelming. With so many options available, users can get lost in their choices and end up spending too much time looking for the "perfect" candidate instead of using that time to start a real relationship. In addition, the algorithms and matching systems put in place may not always be as accurate as users think. There is no perfect system that can match two people's personalities perfectly every time. Communication online also lacks the physical chemistry aspec

  Read more →
• 

  AppBlock

  AppBlock is a software tool for managing screen time that limits access to selected mobile applications and websites. Developed by the Czech studio MobileSoft, it is distributed for Android and iOS devices as well as through browser extensions for Google Chrome, Microsoft Edge and Brave, and as desktop solutions. The application is used primarily to restrict time spent on social media and similar distracting services while working and studying. By 2025, the application reported 700,000 monthly active users, with the domestic Czech market accounting for less than one percent of its total user base and revenue. == History == === Origins === AppBlock was created by the Czech software studio MobileSoft, based in Hradec Králové. The studio was founded in 2012 by Miroslav Novosvětský, who remains the sole owner. The idea for the application arose from the use of browser-based website blockers on desktop computers. AppBlock was conceived as a way to reduce the time spent on mobile devices. === Early releases === In its early phase, AppBlock was available only for phones running on Android. Early versions allowed users to limit access to selected applications and websites during specified periods. From the outset, the application was distributed internationally rather than only within the Czech market, and early coverage reported a multi-million number of downloads worldwide. === Expansion of functionality === Over time, AppBlock has expanded beyond basic application blocking to include additional functions related to limiting procrastination and managing attention. The development of AppBlock accelerated during the COVID-19 pandemic. Following a reduction in external client orders, the studio reallocated resources from contract development to the application. Increased digital content consumption during lockdowns contributed to a rise in the application's usage and revenue. As the application developed, it became the company's product with the largest user base. Novosvětský described an increase in downloads over a twelve-month period, which he linked in part to the company's activities abroad, including participation in events focused on mobile marketing in the United States. These activities were an important factor in the further development of AppBlock. === Internationalization and market expansion === Within roughly the first eight years of the company's existence, MobileSoft became active both in the domestic Czech market and in the United States, supported among other things by participation in the CzechAccelerator program, which is intended to help Czech firms enter foreign markets. In mid-August 2021 the developers launched a version for iOS, which soon began to attract paying users. The expansion to iOS was accompanied by plans for cooperation with the Procrastination.com platform, intended to complement the blocking functions with educational content related to digital media use, sleep and work habits. By 2025, AppBlock was localised into 15 languages, with the largest share of users in the United States, the United Kingdom, Germany, and France, with recent growth in Brazil, and usage extending across several continents. AppBlock has reached more than 10 million installations. In the same period its creators announced plans to refine existing functions and to expand support beyond mobile phones to desktop use, including through support for additional web browsers. == Features == === Supported platforms === AppBlock is distributed as a mobile application for Android and iOS users through Google Play and the Apple App Store. Browser extensions for desktop systems are available for Google Chrome, Microsoft Edge and Brave. === Functionality === AppBlock's core function is to restrict access to selected applications and websites. The mobile application shows a list of installed apps and lets the user select which ones to block. It also includes tools to block specific websites and, on iOS, to block certain phrases entered in the Safari browser. AppBlock can mute notifications from selected applications, so alerts from those apps do not appear while blocking is active. In addition to choosing which apps or content to block, the software also offers an allowlist mode, where only selected applications remain accessible and all others are blocked. Blocking rules are organized into configurable schedules, called profiles. Users can create profiles that define time periods when selected apps and websites are unavailable. Newer versions also allow profiles to be activated automatically based on the time of day, days of the week, the device's location, or connection to specific Wi-Fi networks. The iOS version lets users set limits on how often or how long certain apps can be used before they are blocked, and it can track and restrict screen time for individual apps. In addition to these recurring rules, AppBlock includes a Quick Block feature that temporarily blocks selected apps and websites with a single action, without requiring a separate long-term schedule. Strict Mode is an optional setting that limits the ability to change blocking once it is active. For a specified period, it prevents editing AppBlock's rules and can be configured to stop the app from being uninstalled during that time. While Strict Mode is enabled, users cannot modify or disable the restrictions they have set. Deactivation requires specific verification steps, such as connecting the device to a charger or obtaining approval from a designated contact person. The mobile application also includes statistical and reporting features. In addition to blocking, AppBlock lets users view statistics and data about their use of applications and websites, including screen-time summaries and focus sessions that silence notifications and enforce blocking during defined work or study periods. Browser extensions for desktop environments apply AppBlock's website-blocking functions on Windows and macOS systems through supported web browsers. == Business model == AppBlock uses a freemium revenue model. The basic version of the application is available free of charge and allows blocking of up to three applications at the same time. The premium version removes this limit and adds further configuration options. In 2020, the application shifted from a one-time payment structure to a subscription model. By 2021, AppBlock had more than seven thousand paying users and annual revenue of about four million Czech crowns. By 2025, annual revenue reached approximately 4 million US dollars (80 million CZK) before taxes and platform fees, with roughly 20 percent of active users subscribing to the paid version. == Usage == AppBlock limits access to selected applications and websites in order to reduce smartphone overuse and digital distraction. It is used to block social media, games and other services considered addictive, with the aim of reducing frequent checking of mobile devices and creating time intervals in which these services are unavailable. Reported use cases of AppBlock cover work, students, parents, ADHD, mental health, well-being and business. The application is used both by individual users and within workplace initiatives in which employees install it to reduce digital distractions during working hours.

  Read more →
• 

  Uniform convergence in probability

  Uniform convergence in probability is a form of convergence in probability in statistical asymptotic theory and probability theory. It means that, under certain conditions, the empirical frequencies of all events in a certain event-family uniformly converge to their theoretical probabilities. Uniform convergence in probability has applications to statistics as well as machine learning as part of statistical learning theory. Specifically, the Glivenko-Cantelli theorem and the homonymous classes of functions are fundamentally related to uniform convergence. The law of large numbers says that, for each single event A {\displaystyle A} , its empirical frequency in a sequence of independent trials converges (with high probability) to its theoretical probability. In many application however, the need arises to judge simultaneously the probabilities of events of an entire class S {\displaystyle S} from one and the same sample. Moreover, it, is required that the relative frequency of the events converge to the probability uniformly over the entire class of events S {\displaystyle S} . The Uniform Convergence Theorem gives a sufficient condition for this convergence to hold. Roughly, if the event-family is sufficiently simple (its VC dimension is sufficiently small) then uniform convergence holds. == Definitions == For a class of predicates H {\displaystyle H} defined on a set X {\displaystyle X} and a set of samples x = ( x 1 , x 2 , … , x m ) {\displaystyle x=(x_{1},x_{2},\dots ,x_{m})} , where x i ∈ X {\displaystyle x_{i}\in X} , the empirical frequency of h ∈ H {\displaystyle h\in H} on x {\displaystyle x} is Q ^ x ( h ) = 1 m | { i : 1 ≤ i ≤ m , h ( x i ) = 1 } | . {\displaystyle {\widehat {Q}}_{x}(h)={\frac {1}{m}}|\{i:1\leq i\leq m,h(x_{i})=1\}|.} The theoretical probability of h ∈ H {\displaystyle h\in H} is defined as Q P ( h ) = P { y ∈ X : h ( y ) = 1 } . {\displaystyle Q_{P}(h)=P\{y\in X:h(y)=1\}.} The Uniform Convergence Theorem states, roughly, that if H {\displaystyle H} is "simple" and we draw samples independently (with replacement) from X {\displaystyle X} according to any distribution P {\displaystyle P} , then with high probability, the empirical frequency will be close to its expected value, which is the theoretical probability. Here "simple" means that the Vapnik–Chervonenkis dimension of the class H {\displaystyle H} is small relative to the size of the sample. In other words, a sufficiently simple collection of functions behaves roughly the same on a small random sample as it does on the distribution as a whole. The Uniform Convergence Theorem was first proved by Vapnik and Chervonenkis using the concept of growth function. == Uniform Convergence Theorem == The statement of the Uniform Convergence Theorem is as follows: If H {\displaystyle H} is a set of { 0 , 1 } {\displaystyle \{0,1\}} -valued functions defined on a set X {\displaystyle X} and P {\displaystyle P} is a probability distribution on X {\displaystyle X} then for ε > 0 {\displaystyle \varepsilon >0} and m {\displaystyle m} a positive integer, we have: P m { | Q P ( h ) − Q x ^ ( h ) | ≥ ε for some h ∈ H } ≤ 4 Π H ( 2 m ) e − ε 2 m / 8 . {\displaystyle P^{m}\{|Q_{P}(h)-{\widehat {Q_{x}}}(h)|\geq \varepsilon {\text{ for some }}h\in H\}\leq 4\Pi _{H}(2m)e^{-\varepsilon ^{2}m/8}.} In the above, for any x ∈ X m , {\displaystyle x\in X^{m},} Q P ( h ) = P { ( y ∈ X : h ( y ) = 1 } , {\displaystyle Q_{P}(h)=P\{(y\in X:h(y)=1\},} Q ^ x ( h ) = 1 m | { i : 1 ≤ i ≤ m , h ( x i ) = 1 } | {\displaystyle {\widehat {Q}}_{x}(h)={\frac {1}{m}}|\{i:1\leq i\leq m,h(x_{i})=1\}|} and | x | = m . {\displaystyle |x|=m.} P m {\displaystyle P^{m}} indicates that the probability is taken over x {\displaystyle x} consisting of m {\displaystyle m} i.i.d. draws from the distribution P . {\displaystyle P.} Finally, the growth function Π H {\displaystyle \Pi _{H}} is defined in the following way, for any { 0 , 1 } {\displaystyle \{0,1\}} -valued functions H {\displaystyle H} over X {\displaystyle X} and for any natural number m {\displaystyle m} : Π H ( m ) = max | { h ∩ D : D ⊆ X , | D | = m , h ∈ H } | . {\displaystyle \Pi _{H}(m)=\max |\{h\cap D:D\subseteq X,|D|=m,h\in H\}|.} From the point of view of Learning Theory one can consider H {\displaystyle H} to be the Concept/Hypothesis class defined over the instance set X {\displaystyle X} . Crucially, the Sauer–Shelah lemma implies that Π H ( m ) ≤ m d {\displaystyle \Pi _{H}(m)\leq m^{d}} , where d {\displaystyle d} is the VC dimension of H {\displaystyle H} . == Proof of the Uniform Convergence Theorem == and are the sources of the proof below. Before we get into the details of the proof of the Uniform Convergence Theorem we will present a high level overview of the proof. Symmetrization: We transform the problem of analyzing | Q P ( h ) − Q ^ x ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{x}(h)|\geq \varepsilon } into the problem of analyzing | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} , where r {\displaystyle r} and s {\displaystyle s} are i.i.d samples of size m {\displaystyle m} drawn according to the distribution P {\displaystyle P} . One can view r {\displaystyle r} as the original randomly drawn sample of length m {\displaystyle m} , while s {\displaystyle s} may be thought as the testing sample which is used to estimate Q P ( h ) {\displaystyle Q_{P}(h)} . Permutation: Since r {\displaystyle r} and s {\displaystyle s} are picked identically and independently, so swapping elements between them will not change the probability distribution on r {\displaystyle r} and s {\displaystyle s} . So, we will try to bound the probability of | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} for some h ∈ H {\displaystyle h\in H} by considering the effect of a specific collection of permutations of the joint sample x = r | | s {\displaystyle x=r||s} . Specifically, we consider permutations σ ( x ) {\displaystyle \sigma (x)} which swap x i {\displaystyle x_{i}} and x m + i {\displaystyle x_{m+i}} in some subset of 1 , 2 , . . . , m {\displaystyle {1,2,...,m}} . The symbol r | | s {\displaystyle r||s} means the concatenation of r {\displaystyle r} and s {\displaystyle s} . Reduction to a finite class: We can now restrict the function class H {\displaystyle H} to a fixed joint sample and hence, if H {\displaystyle H} has finite VC Dimension, it reduces to the problem to one involving a finite function class. We present the technical details of the proof. It should be stressed that this proof glosses over details like the measurability of the events V {\displaystyle V} and R {\displaystyle R} ; measurability is granted in the case of H {\displaystyle H} being finite or countable, but this is not normally the case in standard applications of the theorem (e.g. for statistical learning theory or to prove the Glivenko-Cantelli theorem). To get measurability, one needs to use a notion of separability of the underlying space, possibly related to H {\displaystyle H} . === Symmetrization === Lemma: Let V = { x ∈ X m : | Q P ( h ) − Q ^ x ( h ) | ≥ ε for some h ∈ H } {\displaystyle V=\{x\in X^{m}:|Q_{P}(h)-{\widehat {Q}}_{x}(h)|\geq \varepsilon {\text{ for some }}h\in H\}} and R = { ( r , s ) ∈ X m × X m : | Q r ^ ( h ) − Q ^ s ( h ) | ≥ ε / 2 for some h ∈ H } . {\displaystyle R=\{(r,s)\in X^{m}\times X^{m}:|{\widehat {Q_{r}}}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2{\text{ for some }}h\in H\}.} Then for m ≥ 2 ε 2 {\displaystyle m\geq {\frac {2}{\varepsilon ^{2}}}} , P m ( V ) ≤ 2 P 2 m ( R ) {\displaystyle P^{m}(V)\leq 2P^{2m}(R)} . Proof: By the triangle inequality, if | Q P ( h ) − Q ^ r ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon } and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2} then | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} . Therefore, P 2 m ( R ) ≥ P 2 m { ∃ h ∈ H , | Q P ( h ) − Q ^ r ( h ) | ≥ ε and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 } = ∫ V P m { s : ∃ h ∈ H , | Q P ( h ) − Q ^ r ( h ) | ≥ ε and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 } d P m ( r ) = A {\displaystyle {\begin{aligned}&P^{2m}(R)\\[5pt]\geq {}&P^{2m}\{\exists h\in H,|Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon {\text{ and }}|Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2\}\\[5pt]={}&\int _{V}P^{m}\{s:\exists h\in H,|Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon {\text{ and }}|Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2\}\,dP^{m}(r)\\[5pt]={}&A\end{aligned}}} since r {\displaystyle r} and s {\displaystyle s} are independent. Now for r ∈ V {\displaystyle r\in V} fix an h ∈ H {\displaystyle h\in H} such that | Q P ( h ) − Q ^ r ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon } . For this h {\displaystyle h} , we shall

  Read more →
• 

  Opponent process

  The opponent process is a hypothesis of color vision that states that the human visual system interprets information about color by processing signals from the three types of photoreceptor cells in an antagonistic manner. The three types of cones are called L, M, and S. The names stand for "Long wavelength sensitive,” "middle wavelength sensitive," and "short wavelength sensitive." The opponent-process theory implicates three opponent channels: L versus M, S versus (L+M), and a luminance channel (+ versus -). These cone-opponent mechanisms were at one time thought to be the neural substrate for a psychological theory called Hering's Opponent Colors Theory, which calls for three psychologically important opponent color processes: red versus green, blue versus yellow, and black versus white (luminance). The Opponent Colors Theory is named for the German physiologist Ewald Hering who proposed the idea in the late 19th century. However, it has been argued that Hering’s Opponent Colors Theory lacks adequate phenomenological and empirical support, and may not be a necessary feature of normal human color experience. Correspondingly, considerable physiological and behavioral evidence proves that the physiological cone opponent mechanisms do not constitute the neurobiological basis for Hering's Opponent Colors Theory. == Color theory == === Complementary colors === When staring at a bright color for a while (e.g. red), then looking away at a white field, an afterimage is perceived, such that the original color will evoke its complementary color (cyan, in the case of red input). When complementary colors are combined or mixed, they "cancel each other out" and become neutral (white or gray). That is, complementary colors are never perceived as a mixture; there is no "greenish red" or "yellowish blue", despite claims to the contrary. The strongest color contrast that a color can have is its complementary color. Complementary colors may also be called "opposite colors" and they were originally considered the primary evidence in support of Hering's Opponent Colors Theory. There are two fatal problems with this evidence. First, the complement of red is not green, as called for by Hering's theory; it is bluish-green. And second, there exists a complementary color for every color, so there is nothing special about the set of complementary pairs picked out by Hering's theory. === Unique hues === The colors that define the extremes for each opponent channel are called unique hues, as opposed to composite (mixed) hues. Ewald Hering first defined the unique hues as red, green, blue, and yellow, and based them on the concept that these colors could not be simultaneously perceived. For example, a color cannot appear both red and green. These definitions have been experimentally refined and are represented today by average hue angles of 353° (carmine red), 128° (cobalt green), 228° (cobalt blue), 58° (yellow). The unique hues are a defining feature of many psychological color spaces, but there is substantial evidence showing that the unique hues are not hard wired in the nervous system, contrary to the stipulations of Hering's Opponent Colors Theory. Unique hues can differ between individuals and are often used in psychophysical research to measure variations in color perception due to color-vision deficiencies or color adaptation. While there is considerable inter-subject variability when defining unique hues experimentally, an individual's unique hues are very consistent, to within a few nanometers of wavelength. == Physiological basis == === Relation to LMS color space === The trichromatic theory is in conflict with Hering's Opponent Colors Theory, although it is compatible with a physiological opponent process that compares the outputs of the different classes of cone types. The poles of these cone opponent mechanisms do not correspond to the unique hues of Hering's Opponent Colors Theory and unlike the unique hues, have no privilege in color perception. Most humans have three different cone cells in their retinas that facilitate trichromatic color vision. Colors are determined by the proportional excitation of these three cone types, i.e. their quantum catch. The levels of excitation of each cone type are the parameters that define LMS color space. To calculate the opponent process tristimulus values from the LMS color space, the cone excitations must be compared: The luminous (achromatic) opponent channel is a weighted sum of all three cone cells (plus the rod cells in some conditions). The red–green opponent channel is equal to the difference of the L- and M-cones. The blue–yellow opponent channel is equal to the difference of the S-cone and the average/weighted sum of the L- and M-cones. Most mammals have no L cone (the primate L cone arose from a gene duplication of the M cone opsin gene). These mammals still show two kinds of opponent channels in their retinal ganglion cells: the achromatic channel and the blue-yellow opponency channel. === Cone opponent mechanisms are encoded in the retina === The output of different types of cones are compared by cells in the retina including retina bipolar cells (which compare signals from L and M cones) and bistratified retinal ganglion cells (which compare S cone signals with L and M cone signals). The output of bipolar cells is relayed to the visual cortex by the retinal ganglion cells (RGCs) by way of a thalamic relay station called the lateral geniculate nucleus (LGN) of the thalamus. Much of the scientific knowledge of retinal ganglion cell physiology was obtained by neural recordings of cells in the LGN. The cone-opponent mechanisms in the retina and LGN represent a fundamental physiological opponent process but do not represent the unique hues (or Hering's Opponent Colors Theory). For example, the colors that best elicit responses of the bistratified S-(L+M)-opponent neurons are best described as purplish (or lavender) and lime-green, not "blue" and "yellow". The neurons are sometimes referred to as "blue–yellow" neurons, but this is a historical artifact dating to the time when it was thought that Hering's Opponent Colors Theory was hardwired by the retina and the mismatch between the colors to which they are optimally tuned and Hering's Opponent Colors was overlooked. Cone opponent mechanisms exist in the retinas of many mammals, including monkeys, mice, and cats. In primates, the LGN contains three major classes of layers: Magnocellular layers (M, large-cell) – responsible largely for the luminance channel Parvocellular layers (P, small-cell) – responsible largely for red–green opponency Koniocellular layers (K) – responsible largely for blue–yellow opponency, poor spatial resolution, long latency Other mammals such as cats also have three cell types denoted as X (magno), Y (parvo), and W (konio). The W type is beyond most doubt homologous to the primate K type. There are some subtle differences between the M and X types as well as the Y and P types to make the correspondence unclear. === Advantage === Transmitting information in opponent-channel color space could be advantageous over transmitting it in LMS color space ("raw" signals from each cone type). There is some overlap in the wavelengths of light to which the three types of cones (L for long-wave, M for medium-wave, and S for short-wave light) respond, so it is more efficient for the visual system (from a perspective of dynamic range) to record differences between the responses of cones, rather than each type of cone's individual response. Hurvich and Jameson argued that the use of opponent-channel color space would increase color contrast, making the information easier to process by later stages of vision. === Color blindness === Color blindness can be classified by the cone cell that is affected (protan, deutan, tritan) or by the opponent channel that is affected (red–green or blue–yellow). In either case, the channel can either be inactive (in the case of dichromacy) or have a lower dynamic range (in the case of anomalous trichromacy). For example, individuals with deuteranopia see little difference between the red and green unique hues. == History == Johann Wolfgang von Goethe first studied the physiological effect of opposed colors in his Theory of Colours in 1810. Goethe arranged his color wheel symmetrically "for the colours diametrically opposed to each other in this diagram are those which reciprocally evoke each other in the eye. Thus, yellow demands purple; orange, blue; red, green; and vice versa: Thus again all intermediate gradations reciprocally evoke each other." Ewald Hering proposed opponent color theory in 1892. He thought that the colors red, yellow, green, and blue are special in that any other color can be described as a mix of them, and that they exist in opposite pairs. That is, either red or green is perceived and never greenish-red: Even though yellow is a mixture of red and green in the RGB color theory, humans

  Read more →
• 

  Act! LLC

  ACT! (previously known as Activity Control Technology, Automated Contact Tracking, ACT! by Sage, and Sage ACT!) is a customer relationship management and marketing automation software platform designed for small and medium-sized businesses. It has over 2.8 million registered users as of December 2014. == History == The company Conductor Software was founded in 1986, in Dallas, Texas, by Pat Sullivan and Mike Muhney. The original name for the software was Activity Control Technology; it was renamed to Automated Contact Tracking, later abbreviated to ACT. The name of the company was subsequently changed to Contact Software International and it was sold in 1993 to Symantec Corporation, who in 1999 then sold it to SalesLogix. The Sage Group purchased Interact Commerce (formerly SalesLogix) in 2001 through Best Software, then its North American software division. Swiftpage acquired it in 2013. Beginning with the 2006 version, the name was styled ACT! by Sage, and in 2010 revised to Sage ACT!. Following its 2013 acquisition by Swiftpage, it was renamed to ACT! Swiftpage. In May 2018, ACT! was sold to SFW Advisors. In December 2018, Kuvana, a marketing automation software solution, was acquired by SFW and merged with ACT! This add-on is now a complementary service to the core CRM solution. In December 2019, ACT! hired Steve Oriola as chairman and CEO. In 2020, Swiftpage changed its company name to ACT!. In March 2023, ACT! hired Bruce Reading as President and CEO. == Software == ACT! features include contact, company and opportunity management, a calendar, marketing automation and e-marketing tools, reports, interactive dashboards with graphical visualizations, and the ability to track prospective customers. ACT! integrates with Microsoft Word, Excel, Outlook, Google Contacts, Gmail, and other applications via Zapier. For custom integrations, ACT! has an in-built API. ACT! can be accessed from Windows desktops (Win7 and later) with local or network shared database; synchronized to laptops or remote officers; Citrix or Remote Desktop; Web browsers (Premium only) with self or SaaS hosting; smartphones and tablets via HTML5 Web (Premium only); smartphones and tablets via sync with Handheld Contact.

  Read more →