AI Content Udemy

AI Content Udemy — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Nona-binning

  Nona-binning is a pixel binning technique used in high-resolution image sensors, primarily in smartphone cameras. The method is based on merging groups of nine neighbouring pixels arranged in a 3×3 pattern. This configuration allows a sensor with very small individual pixels to increase its effective light sensitivity when operating in low-light conditions, while still maintaining high nominal resolution in bright environments. == Overview == Nona-binning is most commonly implemented in sensors with a resolution of 108 megapixels and higher. As pixel counts grew, the physical dimensions of individual pixels continued to shrink, reducing the amount of light captured by each. The 3×3 binning structure enables a sensor to operate in two modes. In well-lit scenes, each pixel is processed separately, providing the full resolution of the sensor. In darker settings, nine pixels with identical colour filters are combined into a single output unit, increasing signal strength and reducing noise. == Technical principles == Unlike the traditional Bayer colour filter array, which alternates colours on a per-pixel basis, nona-binning uses a grouped layout. The sensor forms blocks of nine pixels with matching colour filters — typically within a Quad Bayer–derived arrangement extended to 3×3 regions. When operating in the binning mode, the sensor aggregates the charge generated by all nine pixels in each block. This increases effective sensitivity but lowers the final image resolution. When lighting conditions allow, the sensor returns to processing pixel data individually. == Applications == Nona-binning is primarily used in: Smartphone photography, particularly in devices equipped with sensors exceeding 100 megapixels. Low-light imaging, where increased sensitivity improves exposure stability and reduces noise. Computational photography systems, such as multi-frame processing and HDR capture. == Related technologies == Nona-binning belongs to the broader group of pixel-binning approaches used in modern sensors. Other implementations include Tetracell, which merges four pixels in a 2×2 block, and hexa-binning, which combines six pixels, though it is less common. All of these methods aim to balance the high nominal resolution of mobile sensors with the need for improved low-light performance.

  Read more →
• 

  Defining length

  In the field of genetic algorithms, a schema (plural: schemata) is a template that represents a subset of potential solutions. These templates use fixed symbols (e.g., `0` or `1`) for specific positions and a wildcard or "don't care" symbol (often `#` or ``) for others. The defining length of a schema, denoted as L(H), measures the distance between the outermost fixed positions in the template. According to the Schema theorem, a schema with a shorter defining length is less likely to be disrupted by the genetic operator of crossover. As a result, short schemata are considered more robust and are more likely to be propagated to the next generation. In genetic programming, where solutions are often represented as trees, the defining length is the number of links in the minimum tree fragment that includes all the non-wildcard symbols within a schema H. == Example == The defining length is calculated by subtracting the position of the first fixed symbol from the position of the last one. Using 1-based indexing for a string of length 5: The schema `1##0#` has its first fixed symbol (`1`) at position 1 and its last fixed symbol (`0`) at position 4. Its defining length is 4 − 1 = 3. The schema `00##0` has its first fixed symbol at position 1 and its last at position 5. Its defining length is 5 − 1 = 4. The schema `##0##` has only one fixed symbol at position 3. The first and last fixed positions are the same, so its defining length is 3 − 3 = 0.

  Read more →
• 

  Physical neural network

  A physical neural network is a type of artificial neural network in which an electrically adjustable material is used to emulate the function of a neural synapse or a higher-order (dendritic) neuron model. "Physical" neural network is used to emphasize the reliance on physical hardware used to emulate neurons as opposed to software-based approaches. More generally the term is applicable to other artificial neural networks in which a memristor or other electrically adjustable resistance material is used to emulate a neural synapse. == Types of physical neural networks == === ADALINE === In the 1960s Bernard Widrow and Ted Hoff developed ADALINE (Adaptive Linear Neuron) which used electrochemical cells called memistors (memory resistors) to emulate synapses of an artificial neuron. The memistors were implemented as 3-terminal devices operating based on the reversible electroplating of copper such that the resistance between two of the terminals is controlled by the integral of the current applied via the third terminal. The ADALINE circuitry was briefly commercialized by the Memistor Corporation in the 1960s enabling some applications in pattern recognition. However, since the memistors were not fabricated using integrated circuit fabrication techniques the technology was not scalable and was eventually abandoned as solid-state electronics became mature. === Analog VLSI === In 1989 Carver Mead published his book Analog VLSI and Neural Systems, which spun off perhaps the most common variant of analog neural networks. The physical realization is implemented in analog VLSI. This is often implemented as field effect transistors in low inversion. Such devices can be modelled as translinear circuits. This is a technique described by Barrie Gilbert in several papers around mid 1970th, and in particular his Translinear Circuits from 1981. With this method circuits can be analyzed as a set of well-defined functions in steady-state, and such circuits assembled into complex networks. === Physical Neural Network === Alex Nugent describes a physical neural network as one or more nonlinear neuron-like nodes used to sum signals and nanoconnections formed from nanoparticles, nanowires, or nanotubes which determine the signal strength input to the nodes. Alignment or self-assembly of the nanoconnections is determined by the history of the applied electric field performing a function analogous to neural synapses. Numerous applications for such physical neural networks are possible. For example, a temporal summation device can be composed of one or more nanoconnections having an input and an output thereof, wherein an input signal provided to the input causes one or more of the nanoconnection to experience an increase in connection strength thereof over time. Another example of a physical neural network is taught by U.S. Patent No. 7,039,619 entitled "Utilized nanotechnology apparatus using a neural network, a solution and a connection gap," which issued to Alex Nugent by the U.S. Patent & Trademark Office on May 2, 2006. A further application of physical neural network is shown in U.S. Patent No. 7,412,428 entitled "Application of hebbian and anti-hebbian learning to nanotechnology-based physical neural networks," which issued on August 12, 2008. Nugent and Molter have shown that universal computing and general-purpose machine learning are possible from operations available through simple memristive circuits operating the AHaH plasticity rule. More recently, it has been argued that also complex networks of purely memristive circuits can serve as neural networks. === Phase change neural network === In 2002, Stanford Ovshinsky described an analog neural computing medium in which phase-change material has the ability to cumulatively respond to multiple input signals. An electrical alteration of the resistance of the phase change material is used to control the weighting of the input signals. === Memristive neural network === Greg Snider of HP Labs describes a system of cortical computing with memristive nanodevices. The memristors (memory resistors) are implemented by thin film materials in which the resistance is electrically tuned via the transport of ions or oxygen vacancies within the film. DARPA's SyNAPSE project has funded IBM Research and HP Labs, in collaboration with the Boston University Department of Cognitive and Neural Systems (CNS), to develop neuromorphic architectures which may be based on memristive systems. === Protonic artificial synapses === In 2022, researchers reported the development of nanoscale brain-inspired artificial synapses, using the ion proton (H+), for 'analog deep learning'.

  Read more →
• 

  Random projection

  In mathematics and statistics, random projection is a technique used to reduce the dimensionality of a set of points which lie in Euclidean space. According to theoretical results, random projection preserves distances well, but empirical results are sparse. They have been applied to many natural language tasks under the name random indexing. == Dimensionality reduction == Dimensionality reduction, as the name suggests, is reducing the number of random variables using various mathematical methods from statistics and machine learning. Dimensionality reduction is often used to reduce the problem of managing and manipulating large data sets. Dimensionality reduction techniques generally use linear transformations in determining the intrinsic dimensionality of the manifold as well as extracting its principal directions. For this purpose there are various related techniques, including: principal component analysis, linear discriminant analysis, canonical correlation analysis, discrete cosine transform, random projection, etc. Random projection is a simple and computationally efficient way to reduce the dimensionality of data by trading a controlled amount of error for faster processing times and smaller model sizes. The dimensions and distribution of random projection matrices are controlled so as to approximately preserve the pairwise distances between any two samples of the dataset. == Method == The core idea behind random projection is given in the Johnson-Lindenstrauss lemma, which states that if points in a vector space are of sufficiently high dimension, then they may be projected into a suitable lower-dimensional space in a way which approximately preserves pairwise distances between the points with high probability. In random projection, the original d {\displaystyle d} -dimensional data is projected to a k {\displaystyle k} -dimensional subspace, by multiplying on the left by a random matrix R ∈ R k × d {\displaystyle R\in \mathbb {R} ^{k\times d}} . Using matrix notation: If X d × N {\displaystyle X_{d\times N}} is the original set of N d-dimensional observations, then X k × N R P = R k × d X d × N {\displaystyle X_{k\times N}^{RP}=R_{k\times d}X_{d\times N}} is the projection of the data onto a lower k-dimensional subspace. Random projection is computationally simple: form the random matrix "R" and project the d × N {\displaystyle d\times N} data matrix X onto K dimensions of order O ( d k N ) {\displaystyle O(dkN)} . If the data matrix X is sparse with about c nonzero entries per column, then the complexity of this operation is of order O ( c k N ) {\displaystyle O(ckN)} . === Orthogonal random projection === A unit vector can be orthogonally projected to a random subspace. Let u {\displaystyle u} be the original unit vector, and let v {\displaystyle v} be its projection. The norm-squared ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as projecting a random point, uniformly sampled on the unit sphere, to its first k {\displaystyle k} coordinates. This is equivalent to sampling a random point in the multivariate gaussian distribution x ∼ N ( 0 , I d × d ) {\displaystyle x\sim {\mathcal {N}}(0,I_{d\times d})} , then normalizing it. Therefore, ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as ∑ i = 1 k x i 2 ∑ i = 1 k x i 2 + ∑ i = k + 1 d x i 2 {\displaystyle {\frac {\sum _{i=1}^{k}x_{i}^{2}}{\sum _{i=1}^{k}x_{i}^{2}+\sum _{i=k+1}^{d}x_{i}^{2}}}} , which by the chi-squared construction of the Beta distribution, has distribution Beta ⁡ ( k / 2 , ( d − k ) / 2 ) {\displaystyle \operatorname {Beta} (k/2,(d-k)/2)} , with mean k / d {\displaystyle k/d} . We have a concentration inequality P r [ | ‖ v ‖ 2 − k d | ≥ ϵ k d ] ≤ 3 exp ⁡ ( − k ϵ 2 / 64 ) {\displaystyle Pr\left[\left|\|v\|_{2}-{\frac {k}{d}}\right|\geq \epsilon {\sqrt {\frac {k}{d}}}\right]\leq 3\exp \left(-k\epsilon ^{2}/64\right)} for any ϵ ∈ ( 0 , 1 ) {\displaystyle \epsilon \in (0,1)} . === Gaussian random projection === The random matrix R can be generated using a Gaussian distribution. The first row is a random unit vector uniformly chosen from S d − 1 {\displaystyle S^{d-1}} . The second row is a random unit vector from the space orthogonal to the first row, the third row is a random unit vector from the space orthogonal to the first two rows, and so on. In this way of choosing R, and the following properties are satisfied: Spherical symmetry: For any orthogonal matrix A ∈ O ( d ) {\displaystyle A\in O(d)} , RA and R have the same distribution. Orthogonality: The rows of R are orthogonal to each other. Normality: The rows of R are unit-length vectors. === More computationally efficient random projections === Achlioptas has shown that the random matrix can be sampled more efficiently. Either the full matrix can be sampled IID according to R i , j = 3 / k × { + 1 with probability 1 6 0 with probability 2 3 − 1 with probability 1 6 {\displaystyle R_{i,j}={\sqrt {3/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{6}}\\0&{\text{with probability }}{\frac {2}{3}}\\-1&{\text{with probability }}{\frac {1}{6}}\end{cases}}} or the full matrix can be sampled IID according to R i , j = 1 / k × { + 1 with probability 1 2 − 1 with probability 1 2 {\displaystyle R_{i,j}={\sqrt {1/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{2}}\\-1&{\text{with probability }}{\frac {1}{2}}\end{cases}}} Both are efficient for database applications because the computations can be performed using integer arithmetic. More related study is conducted in. It was later shown how to use integer arithmetic while making the distribution even sparser, having very few nonzeroes per column, in work on the Sparse JL Transform. This is advantageous since a sparse embedding matrix means being able to project the data to lower dimension even faster. === Random Projection with Quantization === Random projection can be further condensed by quantization (discretization), with 1-bit (sign random projection) or multi-bits. It is the building block of SimHash, RP tree, and other memory efficient estimation and learning methods. == Large quasiorthogonal bases == The Johnson-Lindenstrauss lemma states that large sets of vectors in a high-dimensional space can be linearly mapped in a space of much lower (but still high) dimension n with approximate preservation of distances. One of the explanations of this effect is the exponentially high quasiorthogonal dimension of n-dimensional Euclidean space. There are exponentially large (in dimension n) sets of almost orthogonal vectors (with small value of inner products) in n–dimensional Euclidean space. This observation is useful in indexing of high-dimensional data. Quasiorthogonality of large random sets is important for methods of random approximation in machine learning. In high dimensions, exponentially large numbers of randomly and independently chosen vectors from equidistribution on a sphere (and from many other distributions) are almost orthogonal with probability close to one. This implies that in order to represent an element of such a high-dimensional space by linear combinations of randomly and independently chosen vectors, it may often be necessary to generate samples of exponentially large length if we use bounded coefficients in linear combinations. On the other hand, if coefficients with arbitrarily large values are allowed, the number of randomly generated elements that are sufficient for approximation is even less than dimension of the data space. == Implementations == RandPro - An R package for random projection sklearn.random_projection - A module for random projection from the scikit-learn Python library Weka implementation [1]

  Read more →
• 

  Doubao

  Doubao (Chinese: 豆包) is an artificial intelligence assistant developed by ByteDance. == History == The chatbot was launched in August 2023. By November 2024, it had become China's most popular AI chatbot, with approximately 60 million monthly active users according to industry analytics. == Design == Doubao is powered by Volcano Engine (Volcengine), 120 trillion tokens consumed per day. == Variants == === Dola === The international version of Doubao is Dola which was launched in August 2023 as Cici. Dola is powered by OpenAI's GPT series of large language models and by Google's Gemini.

  Read more →
• 

  Evolutionary attractor

  An evolutionary attractor is a point in an evolutionary space where a selection process will always drive trait values towards that point from the region around it. Because of the importance of evolution through natural selection, often such an evolutionary space will be defined by genetic or phenotypic traits, or possibly both. In this case the selection process will be a form of natural selection. The existence of an evolutionary attractor in a biological evolutionary space does not always imply that it can be reached from all points in that evolutionary space, nor does it identify what will happen when the evolutionary attractor is reached. While an evolutionary attractor may represent a point in evolutionary space that is resistant to further selection, such as an evolutionarily stable strategy, other possibilities are available. Because identification of an evolutionary attractor on its own does not describe everything about the evolutionary space in which it lies, this has led to interest in the evolutionary dynamics surrounding evolutionary attractors and in evolutionary spaces in general. (Theoretical biologists and mathematicians working in the area may prefer the terms adaptive dynamics or evolutionary invasion analysis to evolutionary dynamics.) These fields use differential equations which allows a more complete understanding of the dynamics in evolutionary spaces including the existence or otherwise of evolutionary attractors. Advances in the study of molecular evolution have also led to the identification of evolutionary attractors at a molecular level. Because biological evolutionary processes have been studied using evolutionary game theory, a technique inspired by game theory originally derived to address economic problems, not only can evolutionary attractors be found in biology but economists studying evolutionary economic models have also identified evolutionary attractors. Evolution in biology has also inspired evolutionary computation in computer science. Many algorithms in this field use a form of selection inspired by natural selection to generate results through evolutionary algorithms. This is therefore another area in which evolutionary attractors have been identified. == Evolutionary attractors in biology == It is not probably not surprising that biology is the field where most examples of evolutionary attractors have been identified, given the importance of evolution through natural selection. === Evolutionary attractors in adaptive landscapes === An evolutionary attractor is a point in genetic and/or phenotypic trait space, that evolution will always drive trait values towards via a selection process. The concept of an evolutionary attractor arose in population genetics following the origin of the adaptive landscape originally proposed by Sewall Wright in 1932. The height of a point in an adaptive landscape is a measure of evolutionary fitness. If a point in an adaptive landscape is a peak, then selection will always drive traits towards it and it will be an evolutionary attractor. While population genetics deals with discrete genetic traits, quantitative genetics extended such concepts to deal with continuous genetic traits, where the concept of evolutionary attractor is also valid. === Evolutionary attractors in evolutionary game models === Evolutionary game theory introduced into evolutionary biology concepts originally used in economics, with the advantage that evolution could be studied in relation to strategic choices made in animal conflicts. This is of particular interest because of the concept of the evolutionarily stable strategy or ESS, a strategy that once established is resistant to invasion by other strategies. ESSs will not always be evolutionary attractors, but if they are they will persist over evolutionary time. === Dynamics around evolutionary attractors in biology === Evolutionary attractors in biology do not exist in isolation. By definition they must exist in an evolutionary trait space where selection drives all traits towards them from a region immediately around them. That is, they must be convergence stable. Eshel (1983) modified the definition of an ESS by considering individually advantageous reduction from a majority deviation: he created the term continuous stability. A continuously stable ESS can be shown to be convergence stable, therefore it will act as an evolutionary attractor. But the nature of evolutionary trait spaces in biology means that it is not possible to guarantee that the region of convergence to the evolutionary attractor covers the whole of the trait space, nor that there is only one evolutionary attractor in a particular trait space. These issues have led to the emergence of the related fields of evolutionary dynamics, adaptive dynamics and evolutionary invasion analysis, all of which use differential equations to understand the dynamics in evolutionary trait spaces. Hence, if one or more evolutionary attractor exists in an evolutionary trait space, they provide techniques to understand the dynamics in that trait space around the evolutionary attractor. === Evolutionary attractors in an ecological context === Evolution in biology does not take place in single species in isolation. Ecological interaction of species leads to coevolution. Important examples of this are host-parasite or host-pathogen interaction, which can make both the dynamics around evolutionary attractors more complex, and the occurrence and number of evolutionary attractors more diverse. Evolutionary attractors have been identified in the analysis of evolutionary epidemiology of plant pathogens. In the above study working on plant populations the authors were able to identify evolutionary attractors using methods from adaptive dynamics. A model applied to the analysis of a maize (Zea mays L.) virus identified convergence stable equilibria through simulation modelling. A related model identified evolutionary attractors in the interaction of plants with fungal pathogens. === Evolutionary attractors in molecular genetics === As mentioned above much of the consideration of evolutionary attractors in biology has been through investigation of selection at a genetic or phenotypic level or both, in a single species or in coevolving species. Advances in the study of molecular genetics now allow the study of evolutionary attractors to be taken to a molecular genetic level. Wilson et. al (2019) studied the evolution of gene regulatory networks and identified the emergence of evolutionary attractors. == Evolutionary attractors in economics == Evolutionary game theory as applied in biology was inspired by game theory originally devised for applications in economics. Game theory remains an active field of research outside of biology, and thus it is not surprising that researchers in evolutionary economics use evolutionary game theory. Evolutionary attractors have been demonstrated by economists studying the evolutionary dynamics of market entry with market dynamics based on the replicator dynamics of biological evolutionary games. == Evolutionary attractors in computing == Evolutionary computation is a branch of computer science inspired by biological evolution. Many algorithms in evolutionary computation use a form of selection. Thus evolutionary attractors have been identified in computer science as well as in biology and economics. Evolutionary algorithms have generated evolutionary attractors, probably because of the similarity between adaptive hill-climbing in evolutionary heuristics and the adaptive landscape originated to explain evolution through natural selection.

  Read more →
• 

  Generalized blockmodeling of valued networks

  Generalized blockmodeling of valued networks is an approach of the generalized blockmodeling, dealing with valued networks (e.g., non-binary). While the generalized blockmodeling signifies a "formal and integrated approach for the study of the underlying functional anatomies of virtually any set of relational data", it is in principle used for binary networks. This is evident from the set of ideal blocks, which are used to interpret blockmodels, that are binary, based on the characteristic link patterns. Because of this, such templates are "not readily comparable with valued empirical blocks". To allow generalized blockmodeling of valued directional (one-mode) networks (e.g. allowing the direct comparisons of empirical valued blocks with ideal binary blocks), a non–parametric approach is used. With this, "an optional parameter determines the prominence of valued ties as a minimum percentile deviation between observed and expected flows". Such two–sided application of parameter then introduces "the possibility of non–determined ties, i.e. valued relations that are deemed neither prominent (1) nor non–prominent (0)." Resulted occurrences of links then motivate the modification of the calculation of inconsistencies between empirical and ideal blocks. At the same time, such links also give a possibility to measure the interpretational certainty, which is specific to each ideal block. Such maximum two–sided deviation threshold, holding the aggregate uncertainty score at zero or near–zero levels, is then proposed as "a measure of interpretational certainty for valued blockmodels, in effect transforming the optional parameter into an outgoing state". Problem with blockmodeling is the standard set of ideal block, as they are all specified using binary link (tie) patters; this results in "a non–trivial exercise to match and count inconsistencies between such ideal binary ties and empirical valued ties". One approach to solve this is by using dichotomization to transform the network into a binary version. The other two approaches were first proposed by Aleš Žiberna in 2007 by introducing valued (generalized) blockmodeling and also homogeneity blockmodeling. The basic idea of the latter is "that the inconsistency of an empirical block with its ideal block can be measured by within block variability of appropriate values". The newly–formed ideal blocks, which are appropriate for blockmodeling of valued networks, are then presented together with the definitions of their block inconsistencies. Two other approaches were later suggested by Carl Nordlund in 2019: deviational approach and correlation-based generalized approach. Both Nordlund's approaches are based on the idea, that valued networks can be compared with the ideal block without values. With this approach, more information is retained for analysis, which also means, that there are fewer partitions having identical values of the criterion function. This means, that the generalized blockmodeling of valued networks measures the inconsistencies more precisely. Usually, only one optimal partition is found in this approach, especially when it is used by homogeneity blockmodeling. Contrary, while using binary blockmodeling on the same sample, usually more than one optimal partition had occurred on several occasions.

  Read more →
• 

  Markov blanket

  In statistics and machine learning, a Markov blanket of a random variable is a set of variables that renders the variable conditionally independent of all other variables in the system. This concept is central in probabilistic graphical models and feature selection. If a Markov blanket is minimal—meaning that no variable in it can be removed without losing this conditional independence—it is called a Markov boundary. Identifying a Markov blanket or boundary allows for efficient inference and helps isolate relevant variables for prediction or causal reasoning. The terms Markov blanket and Markov boundary were coined by Judea Pearl in 1988. A Markov blanket may be derived from the structure of a probabilistic graphical model such as a Bayesian network or Markov random field. == Definition == A Markov blanket of a random variable Y {\displaystyle Y} in a random variable set S = { X 1 , … , X n } {\displaystyle {\mathcal {S}}=\{X_{1},\ldots ,X_{n}\}} is any subset S 1 {\displaystyle {\mathcal {S}}_{1}} of S {\displaystyle {\mathcal {S}}} , conditioned on which other variables are independent with Y {\displaystyle Y} : Y ⊥ ⊥ S ∖ S 1 ∣ S 1 {\displaystyle Y\perp \!\!\!\perp {\mathcal {S}}\smallsetminus {\mathcal {S}}_{1}\mid {\mathcal {S}}_{1}} It means that S 1 {\displaystyle {\mathcal {S}}_{1}} contains at least all the information one needs to infer Y {\displaystyle Y} , where the variables in S ∖ S 1 {\displaystyle {\mathcal {S}}\smallsetminus {\mathcal {S}}_{1}} are redundant. In general, a given Markov blanket is not unique. Any set in S {\displaystyle {\mathcal {S}}} that contains a Markov blanket is also a Markov blanket itself. Specifically, S {\displaystyle {\mathcal {S}}} is a Markov blanket of Y {\displaystyle Y} in S {\displaystyle {\mathcal {S}}} . === Example === In a Bayesian network, the Markov blanket of a node consists of its parents, its children, and its children's other parents (i.e., co-parents). Knowing the values of these nodes makes the target node conditionally independent of the rest of the network. In a Markov random field, the Markov blanket of a node is simply its immediate neighbors. == Markov condition == The concept of a Markov blanket is rooted in the Markov condition, which states that in a probabilistic graphical model, each variable is conditionally independent of its non-descendants given its parents. This condition implies the existence of a minimal separating set — the Markov blanket — that shields a variable from the rest of the network. For instance, when a person holds an object stationary against gravity, the object’s acceleration is fully determined by its direct causes—namely, the upward force from the hand and the downward gravitational pull. Other variables such as air pressure or temperature are causally irrelevant. == Markov boundary == A Markov boundary of Y {\displaystyle Y} in S {\displaystyle {\mathcal {S}}} is a subset S 2 {\displaystyle {\mathcal {S}}_{2}} of S {\displaystyle {\mathcal {S}}} , such that S 2 {\displaystyle {\mathcal {S}}_{2}} itself is a Markov blanket of Y {\displaystyle Y} , but any proper subset of S 2 {\displaystyle {\mathcal {S}}_{2}} is not a Markov blanket of Y {\displaystyle Y} . In other words, a Markov boundary is a minimal Markov blanket. The Markov boundary of a node A {\displaystyle A} in a Bayesian network is the set of nodes composed of A {\displaystyle A} 's parents, A {\displaystyle A} 's children, and A {\displaystyle A} 's children's other parents. In a Markov random field, the Markov boundary for a node is the set of its neighboring nodes. In a dependency network, the Markov boundary for a node is the set of its parents. === Uniqueness of Markov boundary === The Markov boundary always exists. Under some mild conditions, the Markov boundary is unique. However, for most practical and theoretical scenarios multiple Markov boundaries may provide alternative solutions. When there are multiple Markov boundaries, quantities measuring causal effect could fail. == In cognitive science == In the study of consciousness, brain function, and complex adaptive systems, Markov blankets are proposed as a mathematical mechanism which delimits the extent of cognitive entities, whether it be physical or causal.

  Read more →
• 

  Charge-coupled device

  A charge-coupled device (CCD) is an integrated circuit containing an array of linked, or coupled, capacitors. Under the control of an external circuit, each capacitor can transfer its electric charge to a neighboring capacitor. CCD sensors are a major technology used in digital imaging. In a CCD image sensor, pixels are represented by p-doped metal–oxide–semiconductor (MOS) capacitors. These MOS capacitors, the basic building blocks of a CCD, are biased above the threshold for inversion when image acquisition begins, allowing the conversion of incoming photons into electron charges at the semiconductor-oxide interface; the CCD is then used to read out these charges. Although CCDs are not the only technology to allow for light detection, CCD image sensors are widely used in professional, medical, and scientific applications where high-quality image data are required. In applications with less exacting quality demands, such as consumer and professional digital cameras, active pixel sensors, also known as CMOS sensors (complementary MOS sensors), are generally used. However, the large quality advantage CCDs enjoyed early on has narrowed over time and since the late 2010s CMOS sensors are the dominant technology, having largely if not completely replaced CCD image sensors. == History == The basis for the CCD is the metal–oxide–semiconductor (MOS) structure, with MOS capacitors being the basic building blocks of a CCD, and a depleted MOS structure used as the photodetector in early CCD devices. In the late 1960s, Willard Boyle and George E. Smith at Bell Labs were researching MOS technology while working on semiconductor bubble memory. They realized that an electric charge was the analog of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. This led to the invention of the charge-coupled device by Boyle and Smith in 1969. They conceived of the design of what they termed, in their notebook, "Charge 'Bubble' Devices". The initial paper describing the concept in April 1970 listed possible uses as memory, a delay line, and an imaging device. The device could also be used as a shift register. The essence of the design was the ability to transfer charge along the surface of a semiconductor from one storage capacitor to the next. The first experimental device demonstrating the principle was a row of closely spaced metal squares on an oxidized silicon surface electrically accessed by wire bonds. It was demonstrated by Gil Amelio, Michael Francis Tompsett and George Smith in April 1970. This was the first experimental application of the CCD in image sensor technology, and used a depleted MOS structure as the photodetector. The first patent (U.S. patent 4,085,456) on the application of CCDs to imaging was assigned to Tompsett, who filed the application in 1971. The first working CCD made with integrated circuit technology was a simple 8-bit shift register, reported by Tompsett, Amelio and Smith in August 1970. This device had input and output circuits and was used to demonstrate its use as a shift register and as a crude eight pixel linear imaging device. Development of the device progressed at a rapid rate. By 1971, Bell researchers led by Michael Tompsett were able to capture images with simple linear devices. Several companies, including Fairchild Semiconductor, RCA and Texas Instruments, picked up on the invention and began development programs. Fairchild's effort, led by ex-Bell researcher Gil Amelio, was the first with commercial devices, and by 1974 had a linear 500-element device and a 2D 100 × 100 pixel device. Peter L. P. Dillon, a scientist at Kodak Research Labs, invented the first color CCD image sensor by overlaying a color filter array on this Fairchild 100 x 100 pixel Interline CCD starting in 1974. Steven Sasson, an electrical engineer working for the Kodak Apparatus Division, invented a digital still camera using this same Fairchild 100 × 100 CCD in 1975. The interline transfer (ILT) CCD device was proposed by L. Walsh and R. Dyck at Fairchild in 1973 to reduce smear and eliminate a mechanical shutter. To further reduce smear from bright light sources, the frame-interline-transfer (FIT) CCD architecture was developed by K. Horii, T. Kuroda and T. Kunii at Matsushita (now Panasonic) in 1981. The first KH-11 KENNEN reconnaissance satellite equipped with charge-coupled device array (800 × 800 pixels) technology for imaging was launched in December 1976. Under the leadership of Kazuo Iwama, Sony started a large development effort on CCDs involving a significant investment. Eventually, Sony managed to mass-produce CCDs for their camcorders. Before this happened, Iwama died in August 1982. Subsequently, a CCD chip was placed on his tombstone to acknowledge his contribution. The first mass-produced consumer CCD video camera, the CCD-G5, was released by Sony in 1983, based on a prototype developed by Yoshiaki Hagiwara in 1981. Early CCD sensors suffered from shutter lag. This was largely resolved with the invention of the pinned photodiode (PPD). It was invented by Nobukazu Teranishi, Hiromitsu Shiraki and Yasuo Ishihara at NEC in 1980. They recognized that lag can be eliminated if the signal carriers could be transferred from the photodiode to the CCD. This led to their invention of the pinned photodiode, a photodetector structure with low lag, low noise, high quantum efficiency and low dark current. It was first publicly reported by Teranishi and Ishihara with A. Kohono, E. Oda and K. Arai in 1982, with the addition of an anti-blooming structure. The new photodetector structure invented at NEC was given the name "pinned photodiode" (PPD) by B.C. Burkey at Kodak in 1984. In 1987, the PPD began to be incorporated into most CCD devices, becoming a fixture in consumer electronic video cameras and then digital still cameras. Since then, the PPD has been used in nearly all CCD sensors and then CMOS sensors. In January 2006, Boyle and Smith were awarded the National Academy of Engineering Charles Stark Draper Prize, and in 2009 they were awarded the Nobel Prize for Physics for their invention of the CCD concept. Michael Tompsett was awarded the 2010 National Medal of Technology and Innovation, for pioneering work and electronic technologies including the design and development of the first CCD imagers. He was also awarded the 2012 IEEE Edison Medal for "pioneering contributions to imaging devices including CCD Imagers, cameras and thermal imagers". == Basics of operation == In a CCD for capturing images, there is a photoactive region (an epitaxial layer of silicon), and a transmission region made out of a shift register (the CCD, properly speaking). An image is projected through a lens onto the capacitor array (the photoactive region), causing each capacitor to accumulate an electric charge proportional to the light intensity at that location. A one-dimensional array, used in line-scan cameras, captures a single slice of the image, whereas a two-dimensional array, used in video and still cameras, captures a two-dimensional picture corresponding to the scene projected onto the focal plane of the sensor. Once the array has been exposed to the image, a control circuit causes each capacitor to transfer its contents to its neighbor (operating as a shift register). The last capacitor in the array dumps its charge into a charge amplifier, which converts the charge into a voltage. By repeating this process, the controlling circuit converts the entire contents of the array in the semiconductor to a sequence of voltages. In a digital device, these voltages are then sampled, digitized, and usually stored in memory; in an analog device (such as an analog video camera), they are processed into a continuous analog signal (e.g. by feeding the output of the charge amplifier into a low-pass filter), which is then processed and fed out to other circuits for transmission, recording, or other processing. == Detailed physics of operation == === Charge generation === Before the MOS capacitors are exposed to light, they are biased into the depletion region; in n-channel CCDs, the silicon under the bias gate is slightly p-doped or intrinsic. The gate is then biased at a positive potential, above the threshold for strong inversion, which will eventually result in the creation of an n channel below the gate as in a MOSFET. However, it takes time to reach this thermal equilibrium: up to hours in high-end scientific cameras cooled at low temperature. Initially after biasing, the holes are pushed far into the substrate, and no mobile electrons are at or near the surface; the CCD thus operates in a non-equilibrium state called deep depletion. Then, when electron–hole pairs are generated in the depletion region, they are separated by the electric field, the elec

  Read more →
• 

  Fitness function

  A fitness function is a particular type of objective or cost function that is used to summarize, as a single figure of merit, how close a given candidate solution is to achieving the set aims. It is an important component of evolutionary algorithms (EA), such as genetic programming, evolution strategies or genetic algorithms. An EA is a metaheuristic that reproduces the basic principles of biological evolution as a computer algorithm in order to solve challenging optimization or planning tasks, at least approximately. For this purpose, many candidate solutions are generated, which are evaluated using a fitness function in order to guide the evolutionary development towards the desired goal. Similar quality functions are also used in other metaheuristics, such as ant colony optimization or particle swarm optimization. In the field of EAs, each candidate solution, also called an individual, is commonly represented as a string of numbers (referred to as a chromosome). After each round of testing or simulation the idea is to delete the n worst individuals, and to breed n new ones from the best solutions. Each individual must therefore to be assigned a quality number indicating how close it has come to the overall specification, and this is generated by applying the fitness function to the test or simulation results obtained from that candidate solution. Two main classes of fitness functions exist: one where the fitness function does not change, as in optimizing a fixed function or testing with a fixed set of test cases; and one where the fitness function is mutable, as in niche differentiation or co-evolving the set of test cases. Another way of looking at fitness functions is in terms of a fitness landscape, which shows the fitness for each possible chromosome. In the following, it is assumed that the fitness is determined based on an evaluation that remains unchanged during an optimization run. A fitness function does not necessarily have to be able to calculate an absolute value, as it is sometimes sufficient to compare candidates in order to select the better one. A relative indication of fitness (candidate a is better than b) is sufficient in some cases, such as tournament selection or Pareto optimization. == Requirements of evaluation and fitness function == The quality of the evaluation and calculation of a fitness function is fundamental to the success of an EA optimisation. It implements Darwin's principle of "survival of the fittest". Without fitness-based selection mechanisms for mate selection and offspring acceptance, EA search would be blind and hardly distinguishable from the Monte Carlo method. When setting up a fitness function, one must always be aware that it is about more than just describing the desired target state. Rather, the evolutionary search on the way to the optimum should also be supported as much as possible (see also section on auxiliary objectives), if and insofar as this is not already done by the fitness function alone. If the fitness function is designed badly, the algorithm will either converge on an inappropriate solution, or will have difficulty converging at all. Definition of the fitness function is not straightforward in many cases and often is performed iteratively if the fittest solutions produced by an EA is not what is desired. Interactive genetic algorithms address this difficulty by outsourcing evaluation to external agents which are normally humans. == Computational efficiency == The fitness function should not only closely align with the designer's goal, but also be computationally efficient. Execution speed is crucial, as a typical evolutionary algorithm must be iterated many times in order to produce a usable result for a non-trivial problem. Fitness approximation may be appropriate, especially in the following cases: Fitness computation time of a single solution is extremely high Precise model for fitness computation is missing The fitness function is uncertain or noisy. Alternatively or also in addition to the fitness approximation, the fitness calculations can also be distributed to a parallel computer in order to reduce the execution times. Depending on the population model of the EA used, both the EA itself and the fitness calculations of all offspring of one generation can be executed in parallel. == Multi-objective optimization == Practical applications usually aim at optimizing multiple and at least partially conflicting objectives. Two fundamentally different approaches are often used for this purpose, Pareto optimization and optimization based on fitness calculated using the weighted sum. === Weighted sum and penalty functions === When optimizing with the weighted sum, the single values of the O {\displaystyle O} objectives are first normalized so that they can be compared. This can be done with the help of costs or by specifying target values and determining the current value as the degree of fulfillment. Costs or degrees of fulfillment can then be compared with each other and, if required, can also be mapped to a uniform fitness scale. Without loss of generality, fitness is assumed to represent a value to be maximized. Each objective o i {\displaystyle o_{i}} is assigned a weight w i {\displaystyle w_{i}} in the form of a percentage value so that the overall raw fitness f r a w {\displaystyle f_{raw}} can be calculated as a weighted sum: f r a w = ∑ i = 1 O o i ⋅ w i w i t h ∑ i = 1 O w i = 1 {\displaystyle f_{raw}=\sum _{i=1}^{O}{o_{i}\cdot w_{i}}\quad {\mathsf {with}}\quad \sum _{i=1}^{O}{w_{i}}=1} A violation of R {\displaystyle R} restrictions r j {\displaystyle r_{j}} can be included in the fitness determined in this way in the form of penalty functions. For this purpose, a function p f j ( r j ) {\displaystyle pf_{j}(r_{j})} can be defined for each restriction which returns a value between 0 {\displaystyle 0} and 1 {\displaystyle 1} depending on the degree of violation, with the result being 1 {\displaystyle 1} if there is no violation. The previously determined raw fitness is multiplied by the penalty function(s) and the result is then the final fitness f f i n a l {\displaystyle f_{final}} : f f i n a l = f r a w ⋅ ∏ j = 1 R p f j ( r j ) = ∑ i = 1 O ( o i ⋅ w i ) ⋅ ∏ j = 1 R p f j ( r j ) {\displaystyle f_{final}=f_{raw}\cdot \prod _{j=1}^{R}{pf_{j}(r_{j})}=\sum _{i=1}^{O}{(o_{i}\cdot w_{i})}\cdot \prod _{j=1}^{R}{pf_{j}(r_{j})}} This approach is simple and has the advantage of being able to combine any number of objectives and restrictions. The disadvantage is that different objectives can compensate each other and that the weights have to be defined before the optimization. This means that the compromise lines must be defined before optimization, which is why optimization with the weighted sum is also referred to as the a priori method. In addition, certain solutions may not be obtained, see the section on the comparison of both types of optimization. === Pareto optimization === A solution is called Pareto-optimal if the improvement of one objective is only possible with a deterioration of at least one other objective. The set of all Pareto-optimal solutions, also called Pareto set, represents the set of all optimal compromises between the objectives. The figure below on the right shows an example of the Pareto set of two objectives f 1 {\displaystyle f_{1}} and f 2 {\displaystyle f_{2}} to be maximized. The elements of the set form the Pareto front (green line). From this set, a human decision maker must subsequently select the desired compromise solution. Constraints are included in Pareto optimization in that solutions without constraint violations are per se better than those with violations. If two solutions to be compared each have constraint violations, the respective extent of the violations decides. It was recognized early on that EAs with their simultaneously considered solution set are well suited to finding solutions in one run that cover the Pareto front sufficiently well. They are therefore well suited as a-posteriori methods for multi-objective optimization, in which the final decision is made by a human decision maker after optimization and determination of the Pareto front. Besides the SPEA2, the NSGA-II and NSGA-III have established themselves as standard methods. The advantage of Pareto optimization is that, in contrast to the weighted sum, it provides all alternatives that are equivalent in terms of the objectives as an overall solution. The disadvantage is that a visualization of the alternatives becomes problematic or even impossible from four objectives on. Furthermore, the effort increases exponentially with the number of objectives. If there are more than three or four objectives, some have to be combined using the weighted sum or other aggregation methods. === Comparison of both types of assessment === With the help of the weighted sum, the total Pareto front can be obtained by a suitable choice of weights, provided that it is convex

  Read more →
• 

  International Conference on Acoustics, Speech, and Signal Processing

  ICASSP, the International Conference on Acoustics, Speech, and Signal Processing, is an annual flagship conference organized by IEEE Signal Processing Society. Ei Compendex has indexed all papers included in its proceedings. The first ICASSP was held in 1976 in Philadelphia, Pennsylvania, based on the success of a conference in Massachusetts four years earlier that had focused specifically on speech signals. As ranked by Google Scholar's h-index metric in 2016, ICASSP has the highest h-index of any conference in the Signal Processing field. The Brazilian ministry of education gave the conference an 'A1' rating based on its h-index. == Conference list ==

  Read more →
• 

  Gremlin (query language)

  Gremlin is a graph traversal language and virtual machine developed by Apache TinkerPop of the Apache Software Foundation. Gremlin works for both OLTP-based graph databases as well as OLAP-based graph processors. Gremlin's automata and functional language foundation enable Gremlin to naturally support imperative and declarative querying, host language agnosticism, user-defined domain specific languages, an extensible compiler/optimizer, single- and multi-machine execution models, and hybrid depth- and breadth-first evaluation with Turing completeness. As an explanatory analogy, Apache TinkerPop and Gremlin are to graph databases what the JDBC and SQL are to relational databases. Likewise, the Gremlin traversal machine is to graph computing as what the Java virtual machine is to general purpose computing. == History == 2009-10-30 the project is born, and immediately named "TinkerPop" 2009-12-25 v0.1 is the first release 2011-05-21 v1.0 is released 2012-05-24 v2.0 is released 2015-01-16 TinkerPop becomes an Apache Incubator project 2015-07-09 v3.0.0-incubating is released 2016-05-23 Apache TinkerPop becomes a top-level project 2016-07-18 v3.1.3 and v3.2.1 are first releases as Apache TinkerPop 2017-12-17 v3.3.1 is released 2018-05-08 v3.3.3 is released 2019-08-05 v3.4.3 is released 2020-02-20 v3.4.6 is released 2021-05-01 v3.5.0 is released 2022-04-04 v3.6.0 is released 2023-07-31 v3.7.0 is released 2025-11-12 v3.8.0 is released == Vendor integration == Gremlin is an Apache2-licensed graph traversal language that can be used by graph system vendors. There are typically two types of graph system vendors: OLTP graph databases and OLAP graph processors. The table below outlines those graph vendors that support Gremlin. == Traversal examples == The following examples of Gremlin queries and responses in a Gremlin-Groovy environment are relative to a graph representation of the MovieLens dataset. The dataset includes users who rate movies. Users each have one occupation, and each movie has one or more categories associated with it. The MovieLens graph schema is detailed below. === Simple traversals === For each vertex in the graph, emit its label, then group and count each distinct label. What year was the oldest movie made? What is Die Hard's average rating? === Projection traversals === For each category, emit a map of its name and the number of movies it represents. For each movie with at least 11 ratings, emit a map of its name and average rating. Sort the maps in decreasing order by their average rating. Emit the first 10 maps (i.e. top 10). === Declarative pattern matching traversals === Gremlin supports declarative graph pattern matching similar to SPARQL. For instance, the following query below uses Gremlin's match()-step. What 80's action movies do 30-something programmers like? Group count the movies by their name and sort the group count map in decreasing order by value. Clip the map to the top 10 and emit the map entries. === OLAP traversal === Which movies are most central in the implicit 5-stars graph? == Gremlin graph traversal machine == Gremlin is a virtual machine composed of an instruction set as well as an execution engine. An analogy is drawn between Gremlin and Java. === Gremlin steps (instruction set) === The following traversal is a Gremlin traversal in the Gremlin-Java8 dialect. The Gremlin language (i.e. the fluent-style of expressing a graph traversal) can be represented in any host language that supports function composition and function nesting. Due to this simple requirement, there exists various Gremlin dialects including Gremlin-Groovy, Gremlin-Scala, Gremlin-Clojure, etc. The above Gremlin-Java8 traversal is ultimately compiled down to a step sequence called a traversal. A string representation of the traversal above provided below. The steps are the primitives of the Gremlin graph traversal machine. They are the parameterized instructions that the machine ultimately executes. The Gremlin instruction set is approximately 30 steps. These steps are sufficient to provide general purpose computing and what is typically required to express the common motifs of any graph traversal query. Given that Gremlin is a language, an instruction set, and a virtual machine, it is possible to design another traversal language that compiles to the Gremlin traversal machine (analogous to how Scala compiles to the JVM). For instance, the popular SPARQL graph pattern match language can be compiled to execute on the Gremlin machine. The following SPARQL query would compile to In Gremlin-Java8, the SPARQL query above would be represented as below and compile to the identical Gremlin step sequence (i.e. traversal). === Gremlin Machine (virtual machine) === The Gremlin graph traversal machine can execute on a single machine or across a multi-machine compute cluster. Execution agnosticism allows Gremlin to run over both graph databases (OLTP) and graph processors (OLAP).

  Read more →
• 

  Glyph (data visualization)

  In the context of data visualization, a glyph is any marker, such as an arrow or similar marking, used to specify part of a visualization. This is a representation to visualize data where the data set is presented as a collection of visual objects. These visual objects are collectively called a glyph. It helps visualizing data relation in data analysis, statistics, etc. by using any custom notation. In the context of data visualization, a glyph is the visual representation of a piece of data where the attributes of a graphical entity are dictated by one or more attributes of a data record. == Constructing glyphs == Glyph construction can be a complex process when there are many dimensions to be represented in the visualization. Maguire et al proposed a taxonomy based approach to glyph-design that uses a tree to guide the visual encodings used to representation various data items. Duffy et al created perhaps one of the most complex glyph representations with their representation of sperm movement.

  Read more →
• 

  Accumulated local effects

  Accumulated local effects (ALE) is a machine learning interpretability method. == Concepts == ALE uses a conditional feature distribution as an input and generates augmented data, creating more realistic data than a marginal distribution. It ignores far out-of-distribution (outlier) values. Unlike partial dependence plots and marginal plots, ALE is not defeated in the presence of correlated predictors. It analyzes differences in predictions instead of averaging them by calculating the average of the differences in model predictions over the augmented data, instead of the average of the predictions themselves. == Example == Given a model that predicts house prices based on its distance from city center and size of the building area, ALE compares the differences of predictions of houses of different sizes. The result separates the impact of the size from otherwise correlated features. == Limitations == Defining evaluation windows is subjective. High correlations between features can defeat the technique. ALE requires more and more uniformly distributed observations than PDP so that the conditional distribution can be reliably determined. The technique may produce inadequate results if the data is highly sparse, which is more common with high-dimensional data (curse of dimensionality).

  Read more →
• 

  Persian Speech Corpus

  The Persian Speech Corpus is a Modern Persian speech corpus for speech synthesis. The corpus contains phonetic and orthographic transcriptions of about 2.5 hours of Persian speech aligned with recorded speech on the phoneme level, including annotations of word boundaries. Previous spoken corpora of Persian include FARSDAT, which consists of read aloud speech from newspaper texts from 100 Persian speakers and the Telephone FARsi Spoken language DATabase (TFARSDAT) which comprises seven hours of read and spontaneous speech produced by 60 native speakers of Persian from ten regions of Iran. The Persian Speech Corpus was built using the same methodologies laid out in the doctoral project on Modern Standard Arabic of Nawar Halabi at the University of Southampton. The work was funded by MicroLinkPC, who own an exclusive license to commercialise the corpus, though the corpus is available for non-commercial use through the corpus' website. It is distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The corpus was built for speech synthesis purposes, but has been used for building HMM based voices in Persian. It can also be used to automatically align other speech corpora with their phonetic transcript and could be used as part of a larger corpus for training speech recognition systems. == Contents == The corpus is downloadable from its website, and contains the following: 396 .wav files containing spoken utterances 396 .lab files containing text utterances 396 .TextGrid files containing the phoneme labels with time stamps of the boundaries where these occur in the .wav files. phonetic-transcript.txt which has the form "[wav_filename]" "[Phoneme Sequence]" in every line orthographic-transcript.txt which has the form "[wav_filename]" "[Orthographic Transcript]" in every line

  Read more →