AI Content Ko Humanize Kaise Kare

AI Content Ko Humanize Kaise Kare — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Common data model

    Common data model

    A common data model (CDM) can refer to any standardised data model which allows for data and information exchange between different applications and data sources. Common data models aim to standardise logical infrastructure so that related applications can "operate on and share the same data", and can be seen as a way to "organize data from many sources that are in different formats into a standard structure". A common data model has been described as one of the components of a "strong information system". A standardised common data model has also been described as a typical component of a well designed agile application besides a common communication protocol. Providing a single common data model within an organisation is one of the typical tasks of a data warehouse. == Examples of common data models == === Border crossings === X-trans.eu was a cross-border pilot project between the Free State of Bavaria (Germany) and Upper Austria with the aim of developing a faster procedure for the application and approval of cross-border large-capacity transports. The portal was based on a common data model that contained all the information required for approval. === Climate data === The Climate Data Store Common Data Model is a common data model set up by the Copernicus Climate Change Service for harmonising essential climate variables from different sources and data providers. === General information technology === Within service-oriented architecture, S-RAMP is a specification released by HP, IBM, Software AG, TIBCO, and Red Hat which defines a common data model for SOA repositories as well as an interaction protocol to facilitate the use of common tooling and sharing of data. Content Management Interoperability Services (CMIS) is an open standard for inter-operation of different content management systems over the internet, and provides a common data model for typed files and folders used with version control. The NetCDF software libraries for array-oriented scientific data implements a common data model called the NetCDF Java common data model, which consists of three layers built on top of each other to add successively richer semantics. === Health === Within genomic and medical data, the Observational Medical Outcomes Partnership (OMOP) research program established under the U.S. National Institutes of Health has created a common data model for claims and electronic health records which can accommodate data from different sources around the world. PCORnet, which was developed by the Patient-Centered Outcomes Research Institute, is another common data model for health data including electronic health records and patient claims. The Sentinel Common Data Model was initially started as Mini-Sentinel in 2008. It is used by the Sentinel Initiative of the USA's Food and Drug Administration. The Generalized Data Model was first published in 2019. It was designed to be a stand-alone data model as well as to allow for further transformation into other data models (e.g., OMOP, PCORNet, Sentinel). It has a hierarchical structure to flexibly capture relationships among data elements. The JANUS clinical trial data repository also provides a common data model which is based on the SDTM standard to represent clinical data submitted to regulatory agencies, such as tabulation datasets, patient profiles, listings, etc. === Logistics === SX000i is a specification developed jointly by the Aerospace and Defence Industries Association of Europe (ASD) and the American Aerospace Industries Association (AIA) to provide information, guidance and instructions to ensure compatibility and the commonality. The associated SX002D specification contains a common data model. === Microsoft Common Data Model === The Microsoft Common Data Model is a collection of many standardised extensible data schemas with entities, attributes, semantic metadata, and relationships, which represent commonly used concepts and activities in various businesses areas. It is maintained by Microsoft and its partners, and is published on GitHub. Microsoft's Common Data Model is used amongst others in Microsoft Dataverse and with various Microsoft Power Platform and Microsoft Dynamics 365 services. === Rail transport === RailTopoModel is a common data model for the railway sector. === Other === There are many more examples of various common data models for different uses published by different sources.

    Read more →
  • Verifiable secret sharing

    Verifiable secret sharing

    In cryptography, a secret sharing scheme is verifiable if auxiliary information is included that allows players to verify their shares as consistent. More formally, verifiable secret sharing ensures that even if the dealer is malicious there is a well-defined secret that the players can later reconstruct. (In standard secret sharing, the dealer is assumed to be honest.) The concept of verifiable secret sharing (VSS) was first introduced in 1985 by Benny Chor, Shafi Goldwasser, Silvio Micali and Baruch Awerbuch. In a VSS protocol a distinguished player who wants to share the secret is referred to as the dealer. The protocol consists of two phases: a sharing phase and a reconstruction phase. Sharing: Initially the dealer holds secret as input and each player holds an independent random input. The sharing phase may consist of several rounds. At each round each player can privately send messages to other players and can also broadcast a message. Each message sent or broadcast by a player is determined by its input, its random input and messages received from other players in previous rounds. Reconstruction: In this phase each player provides its entire view from the sharing phase and a reconstruction function is applied and is taken as the protocol's output. An alternative definition given by Oded Goldreich defines VSS as a secure multi-party protocol for computing the randomized functionality corresponding to some (non-verifiable) secret sharing scheme. This definition is stronger than that of the other definitions and is very convenient to use in the context of general secure multi-party computation. Verifiable secret sharing is important for secure multiparty computation. Multiparty computation is typically accomplished by making secret shares of the inputs, and manipulating the shares to compute some function. To handle "active" adversaries (that is, adversaries that corrupt nodes and then make them deviate from the protocol), the secret sharing scheme needs to be verifiable to prevent the deviating nodes from throwing off the protocol. == Feldman's scheme == A commonly used example of a simple VSS scheme is the protocol by Paul Feldman, which is based on Shamir's secret sharing scheme combined with any encryption scheme which satisfies a specific homomorphic property (that is not necessarily satisfied by all homomorphic encryption schemes). The following description gives the general idea, but is not secure as written. (Note, in particular, that the published value gs leaks information about the dealer's secret s.) First, a cyclic group G of prime order q, along with a generator g of G, is chosen publicly as a system parameter. The group G must be chosen such that computing discrete logarithms is hard in this group. (Typically, one takes an order-q subgroup of (Z/pZ)×, where q is a prime dividing p − 1.) The dealer then computes (and keeps secret) a random polynomial P of degree t with coefficients in Zq, such that P(0) = s, where s is the secret. Each of the n share holders will receive a value P(1), ..., P(n) modulo q. Any t + 1 share holders can recover the secret s by using polynomial interpolation modulo q, but any set of at most t share holders cannot. (In fact, at this point any set of at most t share holders has no information about s.) So far, this is exactly Shamir's scheme. To make these shares verifiable, the dealer distributes commitments to the coefficients of P modulo q. If P(x) = s + a1x + ... + atxt, then the commitments that must be given are: c0 = gs, c1 = ga1, ... ct = gat. Once these are given, any party can verify their share. For instance, to verify that v = P(i) modulo q, party i can check that g v = c 0 c 1 i c 2 i 2 ⋯ c t i t = ∏ j = 0 t c j i j = ∏ j = 0 t g a j i j = g ∑ j = 0 t a j i j = g P ( i ) {\displaystyle g^{v}=c_{0}c_{1}^{i}c_{2}^{i^{2}}\cdots c_{t}^{i^{t}}=\prod _{j=0}^{t}c_{j}^{i^{j}}=\prod _{j=0}^{t}g^{a_{j}i^{j}}=g^{\sum _{j=0}^{t}a_{j}i^{j}}=g^{P(i)}} . This scheme is, at best, secure against computationally bounded adversaries, namely the intractability of computing discrete logarithms. Pedersen proposed later a scheme where no information about the secret is revealed even with a dealer with unlimited computing power. == Baghery's hash-based scheme == A recent line of research has proposed a unified framework, for building practical VSS schemes that do not necessarily require homomorphic commitments —a key requirement in traditional constructions such as Feldman's and Pedersen's schemes. The framework allows instantiations with different commitment schemes, including post-quantum secure options such as hash-based commitments. This offers a flexible and efficient approach to build VSS schemes, in which the verifiability of shares is decoupled from the need for homomorphic commitments, which are often tied to assumptions like the Discrete Logarithm (DL) problem, known to be insecure against quantum adversaries. One instantiation of the new framework uses hash-based commitments and a random oracle to construct a hash-based VSS scheme based on Shamir's secret sharing. === Protocol Overview === Sharing Phase: Given a secure hash-based commitment scheme C {\displaystyle {\mathcal {C}}} and a hash function H {\displaystyle {\mathcal {H}}} (modeled as a random oracle), to share a secret value s {\displaystyle s} among n {\displaystyle n} parties with threshold t {\displaystyle t} , the dealer acts as follows: Following Shamir sharing, the dealer samples a random degree- t {\displaystyle t} polynomial P ( X ) {\displaystyle P(X)} over a filed or ring, with P ( 0 ) = s {\displaystyle P(0)=s} . Each of the n {\displaystyle n} parties will receive a value v i = P ( i ) {\displaystyle v_{i}=P(i)} modulo q {\displaystyle q} as a share. To prove the validity of the shares, the dealer acts as follows: Samples another random degree- t {\displaystyle t} polynomial R ( X ) {\displaystyle R(X)} and n {\displaystyle n} random values γ 1 , … , γ n {\displaystyle \gamma _{1},\dots ,\gamma _{n}} from the same filed or ring. Computes a set of commitments c i = C ( P ( i ) , R ( i ) , γ i ) {\displaystyle c_{i}={\mathcal {C}}(P(i),R(i),\gamma _{i})} for i = 1 , 2 , … , n {\displaystyle i=1,2,\dots ,n} . Note that, the additional randomness γ i {\displaystyle \gamma _{i}} is used when the secret s {\displaystyle s} does not have sufficient entropy, but it can be omitted when sharing a uniformly random secret. Each of the n {\displaystyle n} parties will also receive a value γ i {\displaystyle \gamma _{i}} modulo q {\displaystyle q} as a share. Calculates a challenge value d {\displaystyle d} via a hash function d = H ( c 1 , … , c n ) {\displaystyle d={\mathcal {H}}(c_{1},\dots ,c_{n})} and then computes a polynomial Z ( X ) = R ( X ) + d ⋅ P ( X ) {\displaystyle Z(X)=R(X)+d\cdot P(X)} . Broadcasts the commitments c 1 , … , c n {\displaystyle c_{1},\dots ,c_{n}} along with Z ( X ) {\displaystyle Z(X)} as the proof and privately sends ( v i , γ i ) {\displaystyle (v_{i},\gamma _{i})} as the individual share to party i {\displaystyle i} . Verification Phase: Given an individual share ( v i , γ i ) {\displaystyle (v_{i},\gamma _{i})} and a proof ( c 1 , … , c n , Z ( X ) ) {\displaystyle (c_{1},\dots ,c_{n},Z(X))} , party i {\displaystyle i} verifies the correctness of it as below: Checks that Z ( X ) {\displaystyle Z(X)} is a valid (up to) degree- t {\displaystyle t} polynomial. Recomputes the challenge value d = H ( c 1 , … , c n ) {\displaystyle d={\mathcal {H}}(c_{1},\dots ,c_{n})} , and verifies the commitment equation c i = C ( v i , Z ( i ) − d v i , γ i ) {\displaystyle c_{i}={\mathcal {C}}(v_{i},Z(i)-dv_{i},\gamma _{i})} . If the verification fails, similar to Feldman’s and Pedersen’s schemes, the party raises a complaint. If too many complaints (more than t {\displaystyle t} ) are raised, the dealer is disqualified. In case of a complaint, the dealer can publicly reveal the disputed share to allow global verification. Honest parties can then collectively agree to either continue or disqualify the dealer. This scheme supports the sharing of both low-entropy and high-entropy secrets. Moreover, since it relies solely on secure hash functions for commitments and on a (quantum) random oracle, it plausibly achieves security even against quantum adversaries. Additionally, by using only lightweight cryptographic primitives, the scheme is considerably more efficient in practice compared to traditional VSS constructions based on number-theoretic assumptions. == Benaloh's scheme == Once n shares are distributed to their holders, each holder should be able to verify that all shares are collectively t-consistent (i.e., any subset t of n shares will yield the same, correct, polynomial without exposing the secret). In Shamir's secret sharing scheme the shares s 1 , s 2 , . . . , s n {\displaystyle s_{1},s_{2},...,s_{n}} are t-consistent if and only if the interpolation of the points ( 1 , s 1 ) , ( 2 , s 2 ) , . . . , (

    Read more →
  • Ultra (cryptography)

    Ultra (cryptography)

    Ultra was the designation adopted by British military intelligence in June 1941 for wartime signals intelligence obtained by breaking high-level encrypted enemy radio and teleprinter communications at the Government Code and Cypher School (GC&CS) at Bletchley Park. Ultra eventually became the standard designation among the western Allies for all such intelligence. The name arose because the intelligence obtained was considered more important than that designated by the highest British security classification then used (Most Secret) and so was regarded as being Ultra Secret. Several other cryptonyms had been used for such intelligence. The code name "Boniface" was used as a cover name for Ultra. In order to ensure that the successful code-breaking did not become apparent to the Germans, British intelligence created a fictional MI6 master spy, Boniface, who controlled a fictional series of agents throughout Germany. Information obtained through code-breaking was often attributed to the human intelligence from the Boniface network. The U.S. used the codename Magic for its decrypts from Japanese sources, including the "Purple" cipher. Much of the German cipher traffic was encrypted on the Enigma machine. Used properly, the German military Enigma would have been virtually unbreakable; in practice, shortcomings in operation allowed it to be broken. The term "Ultra" has often been used almost synonymously with "Enigma decrypts". However, Ultra also encompassed decrypts of the German Lorenz SZ 40/42 machines that were used by the German High Command, and the Hagelin machine. Many observers, at the time and later, regarded Ultra as immensely valuable to the Allies. Winston Churchill was reported to have told King George VI, when presenting to him Stewart Menzies (head of the Secret Intelligence Service and the person who controlled distribution of Ultra decrypts to the government): "It is thanks to the secret weapon of General Menzies, put into use on all the fronts, that we won the war!" F. W. Winterbotham quoted the western Supreme Allied Commander, Dwight D. Eisenhower, at war's end describing Ultra as having been "decisive" to Allied victory. Sir Harry Hinsley, Bletchley Park veteran and official historian of British Intelligence in World War II, made a similar assessment of Ultra, saying that while the Allies would have won the war without it, "the war would have been something like two years longer, perhaps three years longer, possibly four years longer than it was." However, Hinsley and others have emphasized the difficulties of counterfactual history in attempting such conclusions, and some historians, such as John Keegan, have said the shortening might have been as little as the three months it took the United States to deploy the atomic bomb. == Sources of intelligence == Most Ultra intelligence was derived from reading radio messages that had been encrypted with cipher machines, complemented by material from radio communications using traffic analysis and direction finding. In the early phases of the war, particularly during the eight-month Phoney War, the Germans could transmit most of their messages using land lines and so had no need to use radio. This meant that those at Bletchley Park had some time to build up experience of collecting and starting to decrypt messages on the various radio networks. German Enigma messages were the main source, with those of the German air force (the Luftwaffe) predominating, as they used radio more and their operators were particularly ill-disciplined. === German === ==== Enigma ==== "Enigma" refers to a family of electro-mechanical rotor cipher machines. These produced a polyalphabetic substitution cipher and were widely thought to be unbreakable in the 1920s, when a variant of the commercial Model D was first used by the Reichswehr. The German Army (Heer), Navy, Air Force, Nazi party, Gestapo and German diplomats used Enigma machines in several variants. Abwehr (German military intelligence) used a four-rotor machine without a plugboard and Naval Enigma used different key management from that of the army or air force, making its traffic far more difficult to cryptanalyse; each variant required different cryptanalytic treatment. The commercial versions were not as secure and Dilly Knox of GC&CS is said to have broken one before the war. German military Enigma was first broken in December 1932 by Marian Rejewski and the Polish Cipher Bureau, using a combination of brilliant mathematics, the services of a spy in the German office responsible for administering encrypted communications, and good luck. The Poles read Enigma to the outbreak of World War II and beyond, in France. At the turn of 1939, the Germans made the systems ten times more complex, which required a tenfold increase in Polish decryption equipment, which they could not meet. On 25 July 1939, the Polish Cipher Bureau handed reconstructed Enigma machines and their techniques for decrypting ciphers to the French and British. Gordon Welchman wrote, Ultra would never have got off the ground if we had not learned from the Poles, in the nick of time, the details both of the German military Enigma machine, and of the operating procedures that were in use. At Bletchley Park, some of the key people responsible for success against Enigma included mathematicians Alan Turing and Hugh Alexander and, at the British Tabulating Machine Company, chief engineer Harold Keen. After the war, interrogation of German cryptographic personnel led to the conclusion that German cryptanalysts understood that cryptanalytic attacks against Enigma were possible but were thought to require impracticable amounts of effort and investment. The Poles' early start at breaking Enigma and the continuity of their success gave the Allies an advantage when World War II began. ==== Lorenz cipher ==== In June 1941, the Germans started to introduce on-line stream cipher teleprinter systems for strategic point-to-point radio links, to which the British gave the code-name Fish. Several systems were used, principally the Lorenz SZ 40/42 (codenamed "Tunny" by the British) and Geheimfernschreiber ("Sturgeon"). These cipher systems were cryptanalysed, particularly Tunny, which the British thoroughly penetrated. It was eventually attacked using Colossus machines, which were the first digital programme-controlled electronic computers. In many respects the Tunny work was more difficult than for the Enigma, since the British codebreakers had no knowledge of the machine producing it and no head-start such as that the Poles had given them against Enigma. Although the volume of intelligence derived from this system was much smaller than that from Enigma, its importance was often far higher because it produced primarily high-level, strategic intelligence that was sent between Wehrmacht high command (Oberkommando der Wehrmacht, OKW). The eventual bulk decryption of Lorenz-enciphered messages contributed significantly, and perhaps decisively, to the defeat of Nazi Germany. Nevertheless, the Tunny story has become much less well known among the public than the Enigma one. At Bletchley Park, some of the key people responsible for success in the Tunny effort included mathematicians W. T. "Bill" Tutte and Max Newman and electrical engineer Tommy Flowers. === Italian === In June 1940, the Italians were using book codes for most of their military messages, except for the Italian Navy, which in early 1941 had started using a version of the Hagelin rotor-based cipher machine C-38. This was broken from June 1941 onwards by the Italian subsection of GC&CS at Bletchley Park. === Japanese === In the Pacific theatre, a Japanese cipher machine, called "Purple" by the Americans, was used for highest-level Japanese diplomatic traffic. It produced a polyalphabetic substitution cipher, but unlike Enigma, was not a rotor machine, being built around electrical stepping switches. It was broken by the US Army Signal Intelligence Service and disseminated as Magic. Detailed reports by the Japanese ambassador to Germany were encrypted on the Purple machine. His reports included reviews of German assessments of the military situation, reviews of strategy and intentions, reports on direct inspections by the ambassador (in one case, of Normandy beach defences), and reports of long interviews with Hitler. The Japanese are said to have obtained an Enigma machine in 1937, although it is debated whether they were given it by the Germans or bought a commercial version, which, apart from the plugboard and internal wiring, was the German Heer/Luftwaffe machine. Having developed a similar machine, the Japanese did not use the Enigma machine for their most secret communications. The chief fleet communications code system used by the Imperial Japanese Navy was called JN-25 by the Americans, and by early 1942 the US Navy had made considerable progress in decrypting Japanese naval messages. The US Army also made progress on the

    Read more →
  • Myrinet

    Myrinet

    Myrinet, ANSI/VITA 26-1998, is a high-speed local area networking system designed by the company Myricom to be used as an interconnect between multiple machines to form computer clusters. == Description == Myrinet was promoted as having lower protocol overhead than standards such as Ethernet, and therefore better throughput, less interference, and lower latency while using the host CPU. Although it can be used as a traditional networking system, Myrinet is often used directly by programs that "know" about it, thereby bypassing a call into the operating system. Earlier versions of Myrinet used a variety of media and connectors: Generation 2 used copper media with DC-37 (Myrinet-LAN, M2L- controllers and switches) or microribbon (Myrinet-SAN, M2M-) connectors. Generation 3 used copper media with HSSDC (Myrinet-Serial, M3S-) or microribbon (Myrinet-SAN, M3M-) connectors, or fiber with LC-connectors (Myrinet-Fiber, M3F-). The later versions of Myrinet physically consist of two fibre optic cables, upstream and downstream, connected to the host computers with a single connector. Machines are connected via low-overhead routers and switches, as opposed to connecting one machine directly to another. Myrinet includes a number of fault-tolerance features, mostly backed by the switches. These include flow control, error control, and "heartbeat" monitoring on every link. The "fourth-generation" Myrinet, called Myri-10G, supported a 10 Gbit/s data rate and can use 10 Gigabit Ethernet on PHY, the physical layer (cables, connectors, distances, signaling). Myri-10G started shipping at the end of 2005. Myrinet was approved in 1998 by the American National Standards Institute for use on the VMEbus as ANSI/VITA 26-1998. One of the earliest publications on Myrinet is a 1995 IEEE article. === Performance === Myrinet is a lightweight protocol with little overhead that allows it to operate with throughput close to the basic signaling speed of the physical layer. For supercomputing, the low latency of Myrinet is even more important than its throughput performance, since, according to Amdahl's law, a high-performance parallel system tends to be bottlenecked by its slowest sequential process, which in all but the most embarrassingly parallel supercomputer workloads is often the latency of message transmission across the network. === Deployment === According to Myricom, 141 (28.2%) of the June 2005 TOP500 supercomputers used Myrinet technology. In the November 2005 TOP500, the number of supercomputers using Myrinet was down to 101 computers, or 20.2%, in November 2006, 79 (15.8%), and by November 2007, 18 (3.6%), a long way behind gigabit Ethernet at 54% and InfiniBand at 24.2%. In the June 2014 TOP500 list, the number of supercomputers using Myrinet interconnect was 1 (0.2%). In November 2013, the assets of Myricom (including the Myrinet technology) were acquired by CSP Inc. In 2016, it was reported that Google had also offered to buy the company.

    Read more →
  • Film recorder

    Film recorder

    A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record

    Read more →
  • Vans challenge

    Vans challenge

    The Vans challenge is a viral internet challenge that began in March 2019 where people show their Vans shoes landing right-side up after tossing them in the air. The viral sensation reportedly started after a Twitter user shared a video of the occurrence, which was captioned: “Did you know it doesn’t matter how you throw your Vans they will land facing up.” Since then, multiple people on social media posted similar videos of them throwing their Vans in the air and landing right-side up, along with Crocs, UGG boots, and other popular shoes. This theory proved false, as these shoes have not always landed facing up after tossing them.

    Read more →
  • WhoSay

    WhoSay

    WhoSay was an American social media service and branding platform for celebrities and their fans. Founded in Los Angeles in 2010, with financing by Creative Artists Agency (CAA), Amazon.com and other investors, it is notable for allowing its users to retain ownership rights over the content that they post to their accounts, through copyright branding, and for enabling users to post content to other social media sites like Twitter, Facebook, Instagram and Tumblr simultaneously. WhoSay describes itself as a "social celebrity magazine" whose editorial team keeps its users informed about the latest celebrity and entertainment news. Clients such as Dylan McDermott and Chris Rock lauded the service for its ability to add content to multiple social network sites easily. Rock in particular has commented on its ease of use for those who are not part of a tech-savvy demographic, commenting, "It's perfect for someone that's not 25." WhoSay's competitors included theAudience, which is operated by the William Morris Endeavor. == History == WhoSay was founded in March 2010, by Steve Ellis and the Los Angeles-based talent agency Creative Artists Agency (CAA). It was financed through investments Amazon.com (who along with CAA, holds a minority stake in the company), Comcast, Greylock Partners, and High Peak Ventures. The company's main headquarters are in The New York Times Building in Manhattan, with additional headquarters in CAA's office building in the Silicon Beach area of Los Angeles, and in London. The company was founded to protect celebrities' intellectual property and enable the celebrities themselves to profit themselves from their own content through copyright branding. Its chief executive is co-founder Steve Ellis, who, after leaving Getty Images, was contacted by CAA, who were looking to resolve the issue of celebrities losing the rights to their own photos and videos when uploading them to social network sites. Ellis explained WhoSay's mission thus: "We work with people who are constantly being utilized by third parties for the wrong reasons. [The company was formed] to give celebrities and other influential people a set of tools to allow them to manage and control their presence in the digital world." In this way, WhoSay is likened by Ellis to "a People magazine by the people themselves who are in it." The company started slowly, until CAA client Tom Hanks signed onto WhoSay three months after the service's launch. The company continued to maintain a low profile for the first three years of operation, during which it accumulated a client list of 1,500 actors, musicians and artists. Clients are accepted by the service on an invitation-only basis, although they are not restricted to Creative Artists clients. Among them are Kelly Clarkson, Julia Louis-Dreyfus, Paula Patton, Kevin Spacey, Jim Carrey, John Cusack, Bill Maher, Johnny Knoxville, Chelsea Handler, Eva Longoria, Spike Lee, Enrique Iglesias and Katie Couric. Clients are not charged for the service, and are given a share of any revenue that is generated by advertisements. They are also given the ability share in the database of e-mail addresses that come with registration, in order to communicate directly with fans. Actor Dylan McDermott was introduced to WhoSay by his agent, as a way of easily posting content to Facebook, Twitter, Tumblr and even China's Tencent social network with relative ease. McDermott comments, "When you put something out there, you can hit everything at one time. It makes it easy for me." Comedian Chris Rock has commented that WhoSay is ideal for people like him have developed difficulty in keeping track of different websites as they get older, saying, "It's perfect for someone that's not 25." In September 2013 WhoSay introduced a mobile application for consumers. By October 2013, the company's website attracted 12 million monthly visitors. In July 2014 Rob Gregory left his role as president of Newsweek's The Daily Beast to become WhoSay's chief revenue officer. Among his responsibilities are developing ways to monetize WhoSay's web and mobile products, such as premium advertising strategies and brand partnerships. WhoSay does not allow consumers to create accounts, nor does it include search features, making it difficult to access a celebrity's account unless a user is directed there from one of their other social pages. According to Ellis, consumers have enough social media choices, saying, "Frankly they don't really need the services that we provide, and there are a lot of very specific features built into our service that really only benefit someone who is of a high profile." By February 2015, WhoSay had amassed 4.8 million unique users, and expanded its accounts to companies that employ celebrities for branded content. Such companies include Lexus, which partnered with the company to promote a campaign in which actress Rosario Dawson, during the lead up to the 87th Academy Awards, released five short videos on her social media accounts. The videos feature her driving through Los Angeles in preparation for the grand opening of her pop-up store, which sells Studio One Eighty Nine, a clothing line tied to her foundation promoting African culture and content. That April, WhoSay partnered with Chevrolet's #BestDayEver social media campaign for April Fool's Day, enlisting Olivia Wilde, Norman Reedus, Alec Baldwin, Ian Somerhalder, and Nikki Reed to surprise students in four U.S. classrooms as their substitute teachers. For example, Baldwin, dressed as Abraham Lincoln, surprised students in an Occidental College class on U.S. Culture and Society. Other companies that WhoSay has partnered with include KFC, JCPenney, Dunkin' Donuts and Crest. In January 2018, the website was acquired by Viacom (now Paramount Global).

    Read more →
  • Philco computers

    Philco computers

    Philco was one of the pioneers of transistorized computers, also known as second-generation computers. After the company developed the surface-barrier transistor, which was much faster than previous point-contact types, it was awarded contracts for military and government computers. Commercialized derivatives of some of these designs became successful business and scientific computers. The TRANSAC (Transistor Automatic Computer) Model S-1000 was released as a scientific computer. The TRANSAC S-2000 mainframe computer system was first produced in 1958, and a family of compatible machines, with increasing performance, was released over the next several years. However, the mainframe computer market was dominated by IBM. Other companies could not deploy resources for development, customer support and marketing on the scale that IBM could afford, making competition in this segment difficult after the introduction of the IBM 360 family. Philco went bankrupt and was purchased in 1961 by Ford Motor Company, but the computer division carried on until the Philco division of Ford exited the computer business in 1963. The Ford company maintained one Philco mainframe in use until 1981. == The surface-barrier transistor == The surface-barrier transistor developed by Philco in 1953 had a much higher frequency response than the original point-contact transistors. The transistor was made of a thin crystal of germanium, which was electrolytically etched with pits on either side forming a very thin base region, on the order of 5 micrometers. Philco's process for etching was United States patent number 2,885,571. Philco surface-barrier transistors were used in TX-0, and in early models of what would become the DEC PDP product line. Although relatively fast, the small size of the devices limited their power to circuits operating at a few tens of milliwatts. == Military and government == Between 1955 and 1957, Philco built transistor computers for use in aircraft, models C-1000, C-1100, and C-1102, intended for airborne real-time applications. By 1957, the C-1102 had been used by a civilian sector customer. The BASICPAC AN/TYK 6V (first delivery in 1961), COMPAC AN/TYK 4V (not completed), and LOGICPAC systems were built for the US Army as transportable computer systems for use with their Fieldata concept of integrated information management. BASICPAC was a transistorized computer with up to 28,672 words of 38-bit core memory (including sign and parity), available in several configurations from a minimum system, to a truck-borne mobile version, to a fully expanded system. Basic clock periods was 1 microsecond (which gives a clock rate of 1 MHz), with 12 microsecond memory access and a fixed-point multiplication taking 242 microseconds. Input/output was by paper tape reader and punch, or through a teletypewriter. With additional hardware, magnetic tape storage was also available, with up to seven I/O devices. The instruction set had 31 basic operation codes and nine opcodes for I/O === CXPQ === Philco was contracted by the US Navy to build the CXPQ computer. One model was completed and installed at the David Taylor Model Basin. This design was later adapted to become the commercial TRANSAC S-2000. Only one CXPQ was built. The CXPQ is a 48-bit transistorized computer. === SOLO === In 1955, the National Security Agency through the US Navy contracted with Philco to produce a computer suitable for use as a workstation, with an architecture based on the vacuum-tube computer system called Atlas II already in use at the NSA, and similar to the commercial UNIVAC 1103. At the time, Philco was the largest producer of surface barrier transistors, which were the only type available with the speed and quantities required for a computer. The SOLO prototype was delivered in 1958, but required extensive debugging at NSA. Difficulties were encountered with core memory and power supplies. SOLO used paper tape and teleprinter machines for input and output. SOLO cost about $1 million US, and contained 8,000 transistors. While the system was extensively used for training, testing, research and development, no additional units were ordered. SOLO was removed from active service in 1963. The design of the SOLO became commercialized as Philco's TRANSAC Model S-1000. == Commercial == === S-1000 === The TRANSAC S-1000 was a scientific computer with a 36-bit word length and 4096 words of core memory. It was packaged in a container about the size of a large office desk, and used only 1.2 kilowatts, much less than vacuum-tube-based computers of similar capacity. In a 1961 survey, about 15 S-1000 computer installations had been identified. It weighed about 1,650 pounds (750 kg). === S-2000 === The TRANSAC S-2000 was a large mainframe system intended for both business and scientific work. It had a 48-bit word length and supported calculations in fixed point, floating point and binary-coded decimal formats. The original S-2000 "TRANSAC" (Transistor Automatic Computer) released in 1958 was later designated Model 210; it was used internally at Philco. Similar to the Control Data Corporation Model 1604, it was a 48-bit fully transistorized computer. Three succeeding models were released in the series, all compatible with the software of the original model. The Model 211 was introduced in 1960, using micro-alloy diffused field-effect transistors, requiring significant redesign of circuits compared to the original. The TRANSAC S-2000/Philco 210/211 weighed about 2,000 pounds (910 kg). By 1964, eighteen Model 210, eighteen Model 211 and seven Model 212 systems had been sold. After Philco was purchased by Ford Motor Company, the Model 212 was introduced in 1962 and released in 1963. It had 65,535 words of 48-bit memory. Initially made with 6-microsecond core memory, it had better performance than the IBM 7094 transistor computer. It was later upgraded in 1964 to 2-microsecond core memory, which gave the machine floating-point performance greater than the IBM 7030 Stretch computer. A Model 213 was announced in 1964 but never built. By that time competition from IBM had made the Philco computer operations no longer profitable for Ford, and the division was closed down. The Model 212 could carry out a floating-point multiplication in 22 microseconds. Each word contained two 24-bit instructions with 16 bits of address information and eight bits for the opcode. There were 225 different valid opcodes in the Model 212; invalid opcodes were detected and halted the machine. The CPU had an accumulator register of 48 bits, three general-purpose registers of 24 bits, and 32 index registers of 15 bits. Main memory size ranged from 4K words to 64K words. Only the first model had a magnetic drum memory; later editions used tape drives. The Model 212 weighed about 6,500 pounds (3.3 short tons; 2.9 t). Software for the S-2000 initially consisted of TAC (Translator-Assembler-Compiler), and ALTAC, a FORTRAN II-like language with some differences from the IBM 704 FORTRAN implementation. A COBOL compiler was also available, targeted at business applications. The Philco 2400 was the input/output system for the S-2000. Operations such as reading cards or printing were carried out through magnetic tapes, thereby offloading the S-2000 from relatively slow input/output processing. The 2400 had a 24-bit word length and could be supplied with 4K to 32K characters (1K to 8K words) of core memory, rated at 3-microsecond cycle time. The instruction set was aimed at character I/O use. The idea of base registers, implemented in Philco computers, influenced the design of IBM/360. The last Philco TRANSAC S-2000 Model 212 was taken out of service in December 1981, after 19 years of service at Ford.

    Read more →
  • Cybersecurity in space

    Cybersecurity in space

    Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.

    Read more →
  • Subliminal channel

    Subliminal channel

    In cryptography, subliminal channels are covert channels that can be used to communicate secretly in normal looking communication over an insecure channel. Subliminal channels in digital signature crypto systems were found in 1984 by Gustavus Simmons. Simmons describes how the "Prisoners' Problem" can be solved through parameter substitution in digital signature algorithms. == Examples == An easy example of a narrowband subliminal channel for normal human-language text would be to define that an even word count in a sentence is associated with the bit "0" and an odd word count with the bit "1". The question "Hello, how do you do?" would therefore send the subliminal message "1". The Digital Signature Algorithm has one subliminal broadband and three subliminal narrow-band channels == Improvements == A modification to the Brickell and DeLaurentis signature scheme provides a broadband channel without the necessity to share the authentication key. The Newton channel is not a subliminal channel, but it can be viewed as an enhancement. == Countermeasures == With the help of the zero-knowledge proof and the commitment scheme it is possible to prevent the usage of the subliminal channel. This countermeasure has a 1-bit subliminal channel because for is the problem that a proof can succeed or purposely fail. Another countermeasure can detect, and not prevent, the subliminal usage of the randomness.

    Read more →
  • Merit Network

    Merit Network

    Merit Network, Inc., is a nonprofit member-governed organization providing high-performance computer networking and related services to educational, government, health care, and nonprofit organizations, primarily in Michigan. Created in 1966, Merit operates the longest running regional computer network in the United States. == Organization == Created in 1966 as the Michigan Educational Research Information Triad by Michigan State University (MSU), the University of Michigan (U-M), and Wayne State University (WSU), Merit was created to investigate resource sharing by connecting the mainframe computers at these three Michigan public research universities. Merit's initial three node packet-switched computer network was operational in October 1972 using custom hardware based on DEC PDP-11 minicomputers and software developed by the Merit staff and the staffs at the three universities. Over the next dozen years the initial network grew as new services such as dial-in terminal support, remote job submission, remote printing, and file transfer were added; as gateways to the national and international Tymnet, Telenet, and Datapac networks were established, as support for the X.25 and TCP/IP protocols was added; as additional computers such as WSU's MVS system and the UM's electrical engineering's VAX running UNIX were attached; and as new universities became Merit members. Merit's involvement in national networking activities started in the mid-1980s with connections to the national supercomputing centers and work on the 56 kbit/s National Science Foundation Network (NSFNET), the forerunner of today's Internet. From 1987 until April 1995, Merit re-engineered and managed the NSFNET backbone service. MichNet, Merit's regional network in Michigan was attached to NSFNET and in the early 1990s Merit began extending "the Internet" throughout Michigan, offering both direct connect and dial-in services, and upgrading the statewide network from 56 kbit/s to 1.5 Mbit/s, and on to 45, 155, 622 Mbit/s, and eventually 1 and 10 Gbit/s. In 2003 Merit began its transition to a facilities based network, using fiber optic facilities that it shares with its members, that it purchases or leases under long-term agreements, or that it builds. In addition to network connectivity services, Merit offers a number of related services within Michigan and beyond, including: Internet2 connectivity, VPN, Network monitoring, Voice over IP (VOIP), Cloud storage, E-mail, Domain Name, Network Time, VMware and Zimbra software licensing, Colocation, and professional development seminars, workshops, classes, conferences, and meetings. == History == === Creating the network: 1966 to 1973 === The Michigan Educational Research Information Triad (MERIT) was formed in the fall of 1966 by Michigan State University (MSU), University of Michigan (U-M), and Wayne State University (WSU). More often known as the Merit Computer Network or simply Merit, it was created to design and implement a computer network connecting the mainframe computers at the universities. In the fall of 1969, after funding for the initial development of the network had been secured, Bertram Herzog was named director for MERIT. Eric Aupperle was hired as senior engineer, and was charged with finding hardware to make the network operational. The National Science Foundation (NSF) and the State of Michigan provided the initial funding for the network. In June 1970, the Applied Dynamics Division of Reliance Electric in Saline, Michigan was contracted to build three Communication Computers or CCs. Each would consist of a Digital Equipment Corporation (DEC) PDP-11 computer, dataphone interfaces, and interfaces that would attach them directly to the mainframe computers. The cost was to be slightly less than the $300,000 ($2,487,100, adjusted for inflation) originally budgeted. Merit staff wrote the software that ran on the CCs, while staff at each of the universities wrote the mainframe software to interface to the CCs. The first completed connection linked the IBM S/360-67 mainframe computers running the Michigan Terminal System at WSU and U-M, and was publicly demonstrated on December 14, 1971. The MSU node was completed in October 1972, adding a CDC 6500 mainframe running Scope/Hustler. The network was officially dedicated on May 15, 1973. === Expanding the network: 1974 to 1985 === In 1974, Herzog returned to teaching in the University of Michigan's Industrial Engineering Department, and Aupperle was appointed as director. Use of the all uppercase name "MERIT" was abandoned in favor of the mixed case "Merit". The first network connections were host to host interactive connections which allowed person to remote computer or local computer to remote computer interactions. To this, terminal to host connections, batch connections (remote job submission, remote printing, batch file transfer), and interactive file copy were added. And, in addition to connecting to host computers over custom hardware interfaces, the ability to connect to hosts or other networks over groups of asynchronous ports and via X.25 were added. Merit interconnected with Telenet (later SprintNet) in 1976 to give Merit users dial-in access from locations around the United States. Dial-in access within the U.S. and internationally was further expanded via Merit's interconnections to Tymnet, ADP's Autonet, and later still the IBM Global Network as well as Merit's own expanding network of dial-in sites in Michigan, New York City, and Washington, D.C. In 1978, Western Michigan University (WMU) became the fourth member of Merit (prompting a name change, as the acronym Merit no longer made sense as the group was no longer a triad). To expand the network, the Merit staff developed new hardware interfaces for the Digital PDP-11 based on printed circuit technology. The new system became known as the Primary Communications Processor (PCP), with the earliest PCPs connecting a PDP-10 located at WMU and a DEC VAX running UNIX at U-M's Electrical Engineering department. A second hardware technology initiative in 1983 produced the smaller Secondary Communication Processors (SCP) based on DEC LSI-11 processors. The first SCP was installed at the Michigan Union in Ann Arbor, creating UMnet, which extended Merit's network connectivity deeply into the U-M campus. In 1983 Merit's PCP and SCP software was enhanced to support TCP/IP and Merit interconnected with the ARPANET. === National networking, NSFNET, and the Internet: 1986 to 1995 === In 1986 Merit engineered and operated leased lines and satellite links that allowed the University of Michigan to access the supercomputing facilities at Pittsburgh, San Diego, and NCAR. In 1987, Merit, IBM and MCI submitted a winning proposal to NSF to implement a new NSFNET backbone network. The new NSFNET backbone network service began July 1, 1988. It interconnected supercomputing centers around the country at 1.5 megabits per second (T1), 24 times faster than the 56 kilobits-per-second speed of the previous network. The NSFNET backbone grew to link scientists and educators on university campuses nationwide and connect them to their counterparts around the world. The NSFNET project caused substantial growth at Merit, nearly tripling the staff and leading to the establishment of a new 24-hour Network Operations Center at the U-M Computer Center. In September 1990 in anticipation of the NSFNET T3 upgrade and the approaching end of the 5-year NSFNET cooperative agreement, Merit, IBM, and MCI formed Advanced Network and Services (ANS), a new non-profit corporation with a more broadly based Board of Directors than the Michigan-based Merit Network. Under its cooperative agreement with NSF, Merit remained ultimately responsible for the operation of NSFNET, but subcontracted much of the engineering and operations work to ANS. In 1991 the NSFNET backbone service was expanded to additional sites and upgraded to a more robust 45 Mbit/s (T3) based network. The new T3 backbone was named ANSNet and provided the physical infrastructure used by Merit to deliver the NSFNET Backbone Service. On April 30, 1995, the NSFNET project came to an end, when the NSFNET backbone service was decommissioned and replaced by a new Internet architecture with commercial Internet service providers (ISPs) interconnected at Network Access Points provided by multiple providers across the country. === Bringing the Internet to Michigan: 1985 to 2001 === During the 1980s, Merit Network grew to serve eight member universities, with Oakland University joining in 1985 and Central Michigan University, Eastern Michigan University, and Michigan Technological University joining in 1987. In 1990, Merit's board of directors formally changed the organization's name to Merit Network, Inc., and created the name MichNet to refer to Merit's statewide network. The board also approved a staff proposal to allow organizations other than publicly supported universities, referred to as aff

    Read more →
  • Application delivery network

    Application delivery network

    An application delivery network (ADN) is a suite of technologies that, when deployed together, provide availability, security, visibility, and acceleration for Internet applications such as websites. ADN components provide supporting functionality that enables website content to be delivered to visitors and other users of that website, in a fast, secure, and reliable way. Gartner defines application delivery networking as the combination of WAN optimization controllers (WOCs) and application delivery controllers (ADCs). At the data center end of an ADN is the ADC, an advanced traffic management device that is often also referred to as a web switch, content switch, or multilayer switch, the purpose of which is to distribute traffic among a number of servers or geographically dislocated sites based on application specific criteria. In the branch office portion of an ADN is the WAN optimization controller, which works to reduce the number of bits that flow over the network using caching and compression, and shapes TCP traffic using prioritization and other optimization techniques. Some WOC components are installed on PCs or mobile clients, and there is typically a portion of the WOC installed in the data center. Application delivery networks are also offered by some CDN vendors. The ADC, one component of an ADN, evolved from layer 4-7 switches in the late 1990s when it became apparent that traditional load balancing techniques were not robust enough to handle the increasingly complex mix of application traffic being delivered over a wider variety of network connectivity options. == Application delivery techniques == The Internet was designed according to the end-to-end principle. This principle keeps the core network relatively simple and moves the intelligence as much as possible to the network end-points: the hosts and clients. An Application Delivery Network (ADN) enhances the delivery of applications across the Internet by employing a number of optimization techniques. Many of these techniques are based on established best-practices employed to efficiently route traffic at the network layer including redundancy and load balancing In theory, an Application Delivery Network (ADN) is closely related to a content delivery network. The difference between the two delivery networks lies in the intelligence of the ADN to understand and optimize applications, usually referred to as application fluency. Application Fluent Network (AFN) is based on the concept of Application Fluency to refer to WAN optimization techniques applied at Layer Four to Layer Seven of the OSI model for networks. Application Fluency implies that the network is fluent or intelligent in understanding and being able to optimize delivery of each application. Application Fluent Network is an addition of SDN capabilities. The acronym 'AFN' is used by Alcatel-Lucent Enterprise to refer to an Application Fluent Network. Application delivery uses one or more layer 4–7 switches, also known as a web switch, content switch, or multilayer switch to intelligently distribute traffic to a pool, also known as a cluster or farm, of servers. The application delivery controller (ADC) is assigned a single virtual IP address (VIP) that represents the pool of servers. Traffic arriving at the ADC is then directed to one of the servers in the pool (cluster, farm) based on a number of factors including application specific data values, application transport protocol, availability of servers, current performance metrics, and client-specific parameters. An ADN provides the advantages of load distribution, increase in capacity of servers, improved scalability, security, and increased reliability through application specific health checks. Increasingly the ADN comprises a redundant pair of ADC on which is integrated a number of different feature sets designed to provide security, availability, reliability, and acceleration functions. In some cases these devices are still separate entities, deployed together as a network of devices through which application traffic is delivered, each providing specific functionality that enhances the delivery of the application. == ADN optimization techniques == === TCP multiplexing === TCP Multiplexing is loosely based on established connection pooling techniques utilized by application server platforms to optimize the execution of database queries from within applications. An ADC establishes a number of connections to the servers in its pool and keeps the connections open. When a request is received by the ADC from the client, the request is evaluated and then directed to a server over an existing connection. This has the effect of reducing the overhead imposed by establishing and tearing down the TCP connection with the server, improving the responsiveness of the application. Some ADN implementations take this technique one step further and also multiplex HTTP and application requests. This has the benefit of executing requests in parallel, which enhances the performance of the application. === TCP optimization === There are a number of Request for Comments (RFCs) which describe mechanisms for improving the performance of TCP. Many ADN implement these RFCs in order to provide enhanced delivery of applications through more efficient use of TCP. The RFCs most commonly implemented are: Delayed Acknowledgements Nagle Algorithm Selective Acknowledgements Explicit Congestion Notification ECN Limited and Fast Retransmits Adaptive Initial Congestion Windows === Data compression and caching === ADNs also provide optimization of application data through caching and compression techniques. There are two types of compression used by ADNs today: industry standard HTTP compression and proprietary data reduction algorithms. It is important to note that the cost in CPU cycles to compress data when traversing a LAN can result in a negative performance impact and therefore best practices are to only utilize compression when delivering applications via a WAN or particularly congested high-speed data link. HTTP compression is asymmetric and transparent to the client. Support for HTTP compression is built into web servers and web browsers. All commercial ADN products currently support HTTP compression. A second compression technique is achieved through data reduction algorithms. Because these algorithms are proprietary and modify the application traffic, they are symmetric and require a device to reassemble the application traffic before the client can receive it. A separate class of devices known as WAN Optimization Controllers (WOC) provide this functionality, but the technology has been slowly added to the ADN portfolio over the past few years as this class of device continues to become more application aware, providing additional features for specific applications such as CIFS and SMB. == ADN reliability and availability techniques == === Advanced health checking === Advanced health checking is the ability of an ADN to determine not only the state of the server on which an application is hosted, but the status of the application it is delivering. Advanced health checking techniques allow the ADC to intelligently determine whether or not the content being returned by the server is correct and should be delivered to the client. This feature enables other reliability features in the ADN, such as resending a request to a different server if the content returned by the original server is found to be erroneous. === Load balancing algorithms === The load balancing algorithms found in today's ADN are far more advanced than the simplistic round-robin and least connections algorithms used in the early 1990s. These algorithms were originally loosely based on operating systems' scheduling algorithms, but have since evolved to factor in conditions peculiar to networking and application environments. It is more accurate to describe today's "load balancing" algorithms as application routing algorithms, as most ADN employ application awareness to determine whether an application is available to respond to a request. This includes the ability of the ADN to determine not only whether the application is available, but whether or not the application can respond to the request within specified parameters, often referred to as a service level agreement. Typical industry standard load balancing algorithms available today include: Round Robin Least Connections Fastest Response Time Weighted Round Robin Weighted Least Connections Custom values assigned to individual servers in a pool based on SNMP or other communication mechanism === Fault tolerance === The ADN provides fault tolerance at the server level, within pools or farms. This is accomplished by designating specific servers as a 'backup' that is activated automatically by the ADN in the event that the primary server(s) in the pool fail. The ADN also ensures application availability and reliability through its ability to seamlessly "failover"

    Read more →
  • List of monochrome and RGB color formats

    List of monochrome and RGB color formats

    This list of monochrome and RGB palettes includes generic repertoires of colors (color palettes) to produce black-and-white and RGB color pictures by a computer's display hardware. RGB is the most common method to produce colors for displays; so these complete RGB color repertoires have every possible combination of R-G-B triplets within any given maximum number of levels per component. Each palette is represented by a series of color patches. When the number of colors is low, a 1-pixel-size version of the palette appears below it, for easily comparing relative palette sizes. Huge palettes are given directly in one-color-per-pixel color patches. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 256-level grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet, and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. These images are not necessarily representative of how the image would be displayed on the original graphics hardware, as the hardware may have additional limitations regarding the maximum display resolution, pixel aspect ratio and color placement. Implementation of these formats is specific to each machine. Therefore, the number of colors that can be simultaneously displayed in a given text or graphic mode might be different. Also, the actual displayed colors are subject to the output format used - PAL or NTSC, composite or component video, etc. - and might be slightly different. For simulated images and specific hardware and alternate methods to produce colors other than RGB (ex: composite), see the List of 8-bit computer hardware palettes, the List of 16-bit computer hardware palettes and the List of video game console palettes. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit color depth displays, see the List of software palettes. == Monochrome palettes == These palettes only have some shades of gray, from black to white (considered the darkest and lightest "grays", respectively). The general rule is that those palettes have 2n different shades of gray, where n is the number of bits needed to represent a single pixel. === Monochrome (1-bit grayscale) === Monochrome graphics displays typically have a black background with a white or light gray image, though green and amber monochrome monitors were also common. Such a palette requires only one bit per pixel. Where photo-realism was desired, these early computer systems had a heavy reliance on dithering to make up for the limits of the technology. In some systems, as Hercules and CGA graphic cards for the IBM PC, a bit value of 1 represents white pixels (light on) and a value of 0 the black ones (light off); others, like the Playdate and Atari ST and Apple Macintosh with monochrome monitors, a bit value of 0 means a white pixel (no ink) and a value of 1 means a black pixel (dot of ink), which it approximates to the printing logic. === 2-bit Grayscale === In a 2-bit color palette each pixel's value is represented by 2 bits resulting in a 4-value palette (22 = 4). 2-bit dithering: It has black, white and two intermediate levels of gray as follows: A monochrome 2-bit palette is used on: The Monochrome Display Adapter for the IBM PC NeXT Computer, NeXTcube and NeXTstation monochrome graphic displays. Original Game Boy system portable video game console. Macintosh PowerBook 150 monochrome LC displays. Amiga with A2024 monochrome monitor in high-resolution mode. The original Amazon Kindle The original WonderSwan The Tiger Electronics Game.com portable video game console The original Neo Geo Pocket. === 4-bit Grayscale === In a 4-bit color palette each pixel's value is represented by 4 bits resulting in a 16-value palette (24 = 16): 4-bit grayscale dithering does a fairly good job of reducing visible banding of the level changes: A monochrome 4-bit palette is used on: MOS Technology VDC (on the Commodore 128 with monochrome monitor) Amstrad CPC series with a GT64/GT65 Green Monitor (16 unique green shades) Amstrad CPC Plus series with the MM12 Monochrome monitor (16 shades of grey) Some Apple PowerBooks equipped with monochrome displays like the PowerBook 5300 The original VideoNow === 8-bit Grayscale === In an 8-bit color palette each pixel's value is represented by 8 bits resulting in a 256-value palette (28 = 256). This is usually the maximum number of grays in ordinary monochrome systems; each image pixel occupies a single memory byte. Most scanners can capture images in 8-bit grayscale, and image file formats like TIFF and JPEG natively support this monochrome palette size. Alpha channels employed for video overlay also use (conceptually) this palette. The gray level indicates the opacity of the blended image pixel over the background image pixel. == Dichrome palettes == === 16-bit RG palette === The RG or red–green color space is a color space that uses only two primary colors: red and green. It was used on early color processes for films. It was used as an additive format, similar to the RGB color model but without a blue channel, on processes such as Kinemacolor, Prizma, Technicolor I, Raycol, etc., producing shades of black, red, green and yellow. Alternatively, it was used as a subtractive format on Brewster Color I, Kodachrome I, Prizma II, Technicolor II, etc., producing shades of transparent, red, green and black. Until recently, its primary use was in low-cost light-emitting diode displays in which red and green tended to be far more common than the still nascent blue LED technology, but full-color LEDs with blue have become more common in recent years. ColorCode 3-D, a anaglyph stereoscopic color scheme, uses the RG color space to simulate a broad spectrum of color in one eye, while the blue portion of the spectrum transmits a black-and-white (black-and-blue) image to the other eye to give depth perception. === 16-bit RB palette === === 16-bit GB palette === == Regular RGB palettes == Here are grouped those full RGB hardware palettes that have the same number of binary levels (i.e., the same number of bits) for every red, green and blue components using the full RGB color model. Thus, the total number of colors are always the number of possible levels by component, n, raised to a power of 3: n×n×n = n3. === 3-bit RGB === 3-bit RGB dithering: Systems with a 3-bit RGB palette use 1 bit for each of the red, green and blue color components. That is, each component is either "on" or "off" with no intermediate states. This results in an 8-color palette ((21)3 = 23 = 8) that has black, white, the three RGB primary colors red, green and blue and their correspondent complementary colors cyan, magenta and yellow as follows: The color indices vary between implementations; therefore, index numbers are not given. The 3-bit RGB palette is used by: Text terminals following the ECMA-48 standard (sometimes known as the "ANSI standard", although ANSI X3.128 does not define colors) World System Teletext Level 1/1.5 Videotex Oric computers BBC Micro PC-8801 (up to the MkII) PC-9801 (with original 8086 CPU, before the VM/VX models) Sharp X1 (models before the X1 Turbo Z) Sharp MZ 700 FM-7, FM New 7, FM 77 (before the FM77AV) Sinclair QL Space Invaders Part II (arcade hardware) Macintosh SE (with a color printer or external monitor) Atari 2600 (SECAM version) Color Maximite (PIC32 based microcomputer) Arcadia 2001 PV-1000 Monkey Magic (arcade hardware) VIC-20 (high-res mode) Mouse Trap (arcade hardware) Sanyo MBC-550 series Windows 1.0 (includes dithering) === 6-bit RGB === Systems with a 6-bit RGB palette use 2 bits for each of the red, green, and blue color components. This results in a (22)3 = 43 = 64-color palette as follows: 6-bit RGB systems include the following: Enhanced Graphics Adapter (EGA) for IBM PC/AT (16 colors at once) Sega Master System video game console (32 colors at once) GIME for TRS-80 Color Computer 3 (16 colors at once) Pebble Time smartwatch which has a 6-bit (64 color) e-paper display Parallax Propeller using the reference VGA circuit === 9-bit RGB === Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (23)3 = 83 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega Nomad TurboGrafx-16 (NEC PC-Engine) ZX Spectrum Next The NEC PC-88

    Read more →
  • Factorization of polynomials over finite fields

    Factorization of polynomials over finite fields

    In mathematics and computer algebra the factorization of a polynomial consists of decomposing it into a product of irreducible factors. This decomposition is theoretically possible and is unique for polynomials with coefficients in any field, but rather strong restrictions on the field of the coefficients are needed to allow the computation of the factorization by means of an algorithm. In practice, algorithms have been designed only for polynomials with coefficients in a finite field, in the field of rationals or in a finitely generated field extension of one of them. All factorization algorithms, including the case of multivariate polynomials over the rational numbers, reduce the problem to this case; see polynomial factorization. It is also used for various applications of finite fields, such as coding theory (cyclic redundancy codes and BCH codes), cryptography (public key cryptography by the means of elliptic curves), and computational number theory. As the reduction of the factorization of multivariate polynomials to that of univariate polynomials does not have any specificity in the case of coefficients in a finite field, only polynomials with one variable are considered in this article. == Background == === Finite field === The theory of finite fields, whose origins can be traced back to the works of Gauss and Galois, has played a part in various branches of mathematics. Due to the applicability of the concept in other topics of mathematics and sciences like computer science there has been a resurgence of interest in finite fields and this is partly due to important applications in coding theory and cryptography. Applications of finite fields introduce some of these developments in cryptography, computer algebra and coding theory. A finite field or Galois field is a field with a finite order (number of elements). The order of a finite field is always a prime or a power of prime. For each prime power q = pr, there exists exactly one finite field with q elements, up to isomorphism. This field is denoted GF(q) or Fq. If p is prime, GF(p) is the prime field of order p; it is the field of residue classes modulo p, and its p elements are denoted 0, 1, ..., p−1. Thus a = b in GF(p) means the same as a ≡ b (mod p). === Irreducible polynomials === Let F be a finite field. As for general fields, a non-constant polynomial f in F[x] is said to be irreducible over F if it is not the product of two polynomials of positive degree. A polynomial of positive degree that is not irreducible over F is called reducible over F. Irreducible polynomials allow us to construct the finite fields of non-prime order. In fact, for a prime power q, let Fq be the finite field with q elements, unique up to isomorphism. A polynomial f of degree n greater than one, which is irreducible over Fq, defines a field extension of degree n which is isomorphic to the field with qn elements: the elements of this extension are the polynomials of degree lower than n; addition, subtraction and multiplication by an element of Fq are those of the polynomials; the product of two elements is the remainder of the division by f of their product as polynomials; the inverse of an element may be computed by the extended GCD algorithm (see Arithmetic of algebraic extensions). It follows that, to compute in a finite field of non prime order, one needs to generate an irreducible polynomial. For this, the common method is to take a polynomial at random and test it for irreducibility. For sake of efficiency of the multiplication in the field, it is usual to search for polynomials of the shape xn + ax + b. Irreducible polynomials over finite fields are also useful for pseudorandom number generators using feedback shift registers and discrete logarithm over F2n. The number of irreducible monic polynomials of degree n over Fq is the number of aperiodic necklaces, given by Moreau's necklace-counting function Mq(n). The closely related necklace function Nq(n) counts monic polynomials of degree n which are primary (a power of an irreducible); or alternatively irreducible polynomials of all degrees d which divide n. === Example === The polynomial P = x4 + 1 is irreducible over Q but not over any finite field. On any field extension of F2, P = (x + 1)4. On every other finite field, at least one of −1, 2 and −2 is a square, because the product of two non-squares is a square and so we have If − 1 = a 2 , {\displaystyle -1=a^{2},} then P = ( x 2 + a ) ( x 2 − a ) . {\displaystyle P=(x^{2}+a)(x^{2}-a).} If 2 = b 2 , {\displaystyle 2=b^{2},} then P = ( x 2 + b x + 1 ) ( x 2 − b x + 1 ) . {\displaystyle P=(x^{2}+bx+1)(x^{2}-bx+1).} If − 2 = c 2 , {\displaystyle -2=c^{2},} then P = ( x 2 + c x − 1 ) ( x 2 − c x − 1 ) . {\displaystyle P=(x^{2}+cx-1)(x^{2}-cx-1).} === Complexity === Polynomial factoring algorithms use basic polynomial operations such as products, divisions, gcd, powers of one polynomial modulo another, etc. A multiplication of two polynomials of degree at most n can be done in O(n2) operations in Fq using "classical" arithmetic, or in O(nlog(n) log(log(n)) ) operations in Fq using "fast" arithmetic. A Euclidean division (division with remainder) can be performed within the same time bounds. The cost of a polynomial greatest common divisor between two polynomials of degree at most n can be taken as O(n2) operations in Fq using classical methods, or as O(nlog2(n) log(log(n)) ) operations in Fq using fast methods. For polynomials h, g of degree at most n, the exponentiation hq mod g can be done with O(log(q)) polynomial products, using exponentiation by squaring method, that is O(n2log(q)) operations in Fq using classical methods, or O(nlog(q)log(n) log(log(n))) operations in Fq using fast methods. In the algorithms that follow, the complexities are expressed in terms of number of arithmetic operations in Fq, using classical algorithms for the arithmetic of polynomials. == Factoring algorithms == Many algorithms for factoring polynomials over finite fields include the following three stages: Square-free factorization Distinct-degree factorization Equal-degree factorization An important exception is Berlekamp's algorithm, which combines stages 2 and 3. === Berlekamp's algorithm === Berlekamp's algorithm is historically important as being the first factorization algorithm which works well in practice. However, it contains a loop on the elements of the ground field, which implies that it is practicable only over small finite fields. For a fixed ground field, its time complexity is polynomial, but, for general ground fields, the complexity is exponential in the size of the ground field. === Square-free factorization === The algorithm determines a square-free factorization for polynomials whose coefficients come from the finite field Fq of order q = pm with p a prime. This algorithm firstly determines the derivative and then computes the gcd of the polynomial and its derivative. If it is not one then the gcd is again divided into the original polynomial, provided that the derivative is not zero (a case that exists for non-constant polynomials defined over finite fields). This algorithm uses the fact that, if the derivative of a polynomial is zero, then it is a polynomial in xp, which is, if the coefficients belong to Fp, the pth power of the polynomial obtained by substituting x by x1/p. If the coefficients do not belong to Fp, the pth root of a polynomial with zero derivative is obtained by the same substitution on x, completed by applying the inverse of the Frobenius automorphism to the coefficients. This algorithm works also over a field of characteristic zero, with the only difference that it never enters in the blocks of instructions where pth roots are computed. However, in this case, Yun's algorithm is much more efficient because it computes the greatest common divisors of polynomials of lower degrees. A consequence is that, when factoring a polynomial over the integers, the algorithm which follows is not used: one first computes the square-free factorization over the integers, and to factor the resulting polynomials, one chooses a p such that they remain square-free modulo p. Algorithm: SFF (Square-Free Factorization) Input: A monic polynomial f in Fq[x] where q = pm Output: Square-free factorization of f R ← 1 # Make w be the product (without multiplicity) of all factors of f that have # multiplicity not divisible by p c ← gcd(f, f′) w ← f/c # Step 1: Identify all factors in w i ← 1 while w ≠ 1 do y ← gcd(w, c) fac ← w / y R ← R · faci w ← y; c ← c / y; i ← i + 1 end while # c is now the product (with multiplicity) of the remaining factors of f # Step 2: Identify all remaining factors using recursion # Note that these are the factors of f that have multiplicity divisible by p if c ≠ 1 then c ← c1/p R ← R·SFF(c)p end if Output(R) The idea is to identify the product of all irreducible factors of f with the same multiplicity. This is done in two steps. The first step uses the formal d

    Read more →
  • Azuqua

    Azuqua

    Azuqua is an American cloud-based integration and automation company headquartered in Seattle, Washington. As such, they integrate SaaS applications and create automations that are designed to eliminate manual work. Azuqua's platform has the ability to set up workflows between multiple applications so disparate teams can stay in the loop. Azuqua's customers include companies such as Charles Schwab, General Electric, General Motors, HubSpot, and Airbnb. == History == Nikhil Hasija and Craig Unger founded Azuqua in 2011. In 2013, the team participated in Techstars Microsoft's Windows Azure Accelerator, a Seattle-based incubator that helps entrepreneurs gain traction through deep mentor engagement and rapid iteration cycles. Azuqua announced in 2014 that they have received their Series A funding from Ignition Partners which amounted to $5 million. 2017 included a 65% growth in new customers, a doubling of new SaaS connectors, and a 50% growth in overall employee headcount. Azuqua also received their Series B funding which totaled to $10.8 million. This funding was led by Insight Ventures Partners, with DFJ and Ignition Partners also joining the round In March 2018, Azuqua hired Todd Owens as CEO. Owens was previously CEO of Appuri, a customer data platform. Hasija has transitioned to the role of Chief Product Officer. Azuqua also hired on Dan Kogan who has taken on the role of Chief Marketing Officer. Kogan previously worked at Tableau, a BI and analytics company, as a Senior Director of Product Marketing. Okta acquired Azuqua in 2019. == Product Description/Features == Logic Library: Logic functions that can be used for data processing, branching logic, and business rules Drag and Drop Visual Designer: No-code visual designer Use of API's for each cloud service a business is using to allow the various apps to communicate and share data API Publishing: Integrations and automations can be made available as secure endpoints, webhooks, or open services Connector Builder: Build a connector to an application Connector Library: Pre-built connectors to SaaS applications Error Handling: Automations that execute when an error is detected

    Read more →