AI Content Ko Humanize Kaise Kare

AI Content Ko Humanize Kaise Kare — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Advanced automation functions

  In automation production technology the actions performed by an automated process are executed by a program of instructions which is run during a work cycle. To execute work cycle programs, an automated system should be available to execute these advanced functions. == Safety monitoring == If there is a need for workers in an automated system, a safety monitoring is required for the occupational safety and health of the workers. In a safety monitoring various steps can take place including a complete stop of the system, sounding an alarm or reducing the operating speed. Usually, limiting switches are sensors like temperature probes, heat and smoke detectors or pressure sensitive floor pads. == Maintenance and repair diagnostics == There are three modes of operations which are used in a cycle of maintenance and repair diagnostics: status monitoring, failure diagnostics and recommendation of the repair procedure. In the status monitoring mode, the current system status is displayed. The failure diagnostics mode takes place when a failure occurs. The system will then suggest an adequate repair procedure to a team of experts. == Error detection and recovery == The error detection mode is a step to determine if and when a failure occurs in automated system. The possible errors can be divided into three categories. random errors, systematic errors and aberrations. While in the error recovery mode, remedy actions take place for all detected errors.

  Read more →
• 

  Data event

  A data event is a relevant state transition defined in an event schema. Typically, event schemata are described by pre- and post condition for a single or a set of data items. In contrast to ECA (Event condition action), which considers an event to be a signal, the data event not only refers to the change (signal), but describes specific state transitions, which are referred to in ECA as conditions. Considering data events as relevant data item state transitions allows defining complex event-reaction schemata for a database. Defining data event schemata for relational databases is limited to attribute and instance events. Object-oriented databases also support collection properties, which allows defining changes in collections as data events, too.

  Read more →
• 

  IEEE Transactions on Visualization and Computer Graphics

  IEEE Transactions on Visualization and Computer Graphics is a peer-reviewed scientific journal published by the IEEE Computer Society. It covers subjects related to computer graphics and visualization techniques, systems, software, hardware, and user interface issues. TVCG has been considered the top journal in the field of visualization. Since 2011, TVCG has allowed authors to present recently accepted papers at partner conferences. These include: IEEE Visualization (VIS), including VAST, InfoVis, and SciVis. IEEE Virtual Reality Conference (IEEE VR) IEEE International Symposium on Mixed and Augmented Reality (ISMAR) ACM Symposium on Interactive 3D Graphics and Games (I3D) IEEE Pacific Visualization Conference (IEEE PacificVis) ACM SIGGRAPH/Eurographics Symposium on Computer Animation (SCA) Eurographics Symposium on Geometry Processing (SGP) Pacific Graphics Conference (PG) Eurovis - The EG and VGTC Conference on Visualization Graphics Interfaces (GI)

  Read more →
• 

  Hierarchical RBF

  In computer graphics, hierarchical RBF is an interpolation method based on radial basis functions (RBFs). Hierarchical RBF interpolation has applications in treatment of results from a 3D scanner, terrain reconstruction, and the construction of shape models in 3D computer graphics (such as the Stanford bunny, a popular 3D model). This problem is informally named as "large scattered data point set interpolation." == Method == The steps of the interpolation method (in three dimensions) are as follows: Let the scattered points be presented as set P = { c i = ( x i , y i , z i ) | i = 1 N ⊂ R 3 } {\displaystyle \mathbf {P} =\{\mathbf {c} _{i}=(\mathbf {x} _{i},\mathbf {y} _{i},\mathbf {z} _{i})\vert _{i=1}^{N}\subset \mathbb {R} ^{3}\}} Let there exist a set of values of some function in scattered points H = { h i | i = 1 N ⊂ R } {\displaystyle \mathbf {H} =\{\mathbf {h} _{i}\vert _{i=1}^{N}\subset \mathbb {R} \}} Find a function f ( x ) {\displaystyle \mathbf {f} (\mathbf {x} )} that will meet the condition f ( x ) = 1 {\displaystyle \mathbf {f} (\mathbf {x} )=1} for points lying on the shape and f ( x ) ≠ 1 {\displaystyle \mathbf {f} (\mathbf {x} )\neq 1} for points not lying on the shape As J. C. Carr et al. showed, this function takes the form f ( x ) = ∑ i = 1 N λ i φ ( x , c i ) {\displaystyle \mathbf {f} (\mathbf {x} )=\sum _{i=1}^{N}\lambda _{i}\varphi (\mathbf {x} ,\mathbf {c} _{i})} where φ {\displaystyle \varphi } is a radial basis function and λ {\displaystyle \lambda } are the coefficients that are the solution of the following linear system of equations: [ φ ( c 1 , c 1 ) φ ( c 1 , c 2 ) . . . φ ( c 1 , c N ) φ ( c 2 , c 1 ) φ ( c 2 , c 2 ) . . . φ ( c 2 , c N ) . . . . . . . . . . . . φ ( c N , c 1 ) φ ( c N , c 2 ) . . . φ ( c N , c N ) ] ∗ [ λ 1 λ 2 . . . λ N ] = [ h 1 h 2 . . . h N ] {\displaystyle {\begin{bmatrix}\varphi (c_{1},c_{1})&\varphi (c_{1},c_{2})&...&\varphi (c_{1},c_{N})\\\varphi (c_{2},c_{1})&\varphi (c_{2},c_{2})&...&\varphi (c_{2},c_{N})\\...&...&...&...\\\varphi (c_{N},c_{1})&\varphi (c_{N},c_{2})&...&\varphi (c_{N},c_{N})\end{bmatrix}}{\begin{bmatrix}\lambda _{1}\\\lambda _{2}\\...\\\lambda _{N}\end{bmatrix}}={\begin{bmatrix}h_{1}\\h_{2}\\...\\h_{N}\end{bmatrix}}} For determination of surface, it is necessary to estimate the value of function f ( x ) {\displaystyle \mathbf {f} (\mathbf {x} )} in specific points x. A lack of such method is a considerable complication on the order of O ( n 2 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{2})} to calculate RBF, solve system, and determine surface. == Other methods == Reduce interpolation centers ( O ( n 2 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{2})} to calculate RBF and solve system, O ( m n ) {\displaystyle \mathbf {O} (\mathbf {m} \mathbf {n} )} to determine surface) Compactly support RBF ( O ( n log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {n} \log {\mathbf {n} })} to calculate RBF, O ( n 1.2..1.5 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{1.2..1.5})} to solve system, O ( m log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {m} \log {\mathbf {n} })} to determine surface) FMM ( O ( n 2 ) {\displaystyle \mathbf {O} (\mathbf {n} ^{2})} to calculate RBF, O ( n log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {n} \log {\mathbf {n} })} to solve system, O ( m + n log ⁡ n ) {\displaystyle \mathbf {O} (\mathbf {m} +\mathbf {n} \log {\mathbf {n} })} to determine surface) == Hierarchical algorithm == A hierarchical algorithm allows for an acceleration of calculations due to decomposition of intricate problems on the great number of simple (see picture). In this case, hierarchical division of space contains points on elementary parts, and the system of small dimension solves for each. The calculation of surface in this case is taken to the hierarchical (on the basis of tree-structure) calculation of interpolant. A method for a 2D case is offered by Pouderoux J. et al. For a 3D case, a method is used in the tasks of 3D graphics by W. Qiang et al. and modified by Babkov V.

  Read more →
• 

  The AI Con

  The AI Con: How to Fight Big Tech's Hype and Create the Future We Want is a 2025 non-fiction book by linguist Emily M. Bender and sociologist Alex Hanna. It argues that much of what is labeled "artificial intelligence" is a misleading term that obscures ordinary automation while concentrating power in a small number of technology firms. The book was published in May 2025 by Harper in the United States and Bodley Head in the United Kingdom. It was developed alongside the authors' long-running podcast Mystery AI Hype Theater 3000, which critiques exaggerated claims about AI. == Synopsis == The authors present AI as a marketing umbrella that encourages audiences to infer understanding and agency where none exist. They argue readers should treat such language skeptically and to separate specific automated tasks from broad claims of intelligence. The book describes a recurring hype cycle in which corporate narratives justify data and labor extraction, the replacement of human services with cheaper substitutes, and the diversion of attention from present harms to speculative futures. While acknowledging limited uses such as pattern recognition, the authors argue that contemporary systems are best understood as text and media generators shaped by training data and human labor, not as thinking or reasoning entities. A central theme is the social and environmental cost of scaling these systems, including increased energy and water use, the appropriation of creative work for training, and the outsourcing of ghost work to low-paid data workers worldwide. These costs are linked to workplace effects, with the authors arguing that automation rarely eliminates jobs outright and more often degrades them through surveillance, work intensification, and unpaid oversight. As alternatives to passive adoption, the authors propose concrete responses: asking precise questions about what is being automated and why, demanding transparency about data and evaluation, and practicing what they call strategic refusal when deployment conflicts with evidence or values. The book also develops a vocabulary for public debate, rejecting both boosterish and doomerish narratives as grounded in the same assumption that AI is a singular, autonomous force. The authors recommend reading strategies such as favoring trusted human sources over automated summaries and using humor to deflate inflated claims. They describe a link between language to policy and power, arguing that precise terminology can help policymakers and the public resist austerity-driven automation and demand accountability for errors and harms. == Reception == The Guardian praised the book's myth-busting approach and its analysis of how hype erodes cultural and civic life by normalizing synthetic media as a substitute for human judgment. Kirkus Reviews described it as a contrarian account that catalogs concrete risks while cutting through speculative predictions. An interview in Business Insider highlighted the authors' accessible frameworks, including their proposal to describe chatbots as conversation simulators and to evaluate systems in terms of values, labor, and evidence. Coverage in GeekWire emphasized the book's call for resistance through collective bargaining, stronger data rights, and a norm of rejecting deployments that fail basic standards of necessity and evaluation. Some reviews were more critical. A review in LLRX argued that the book's tone could be overly polemical and that it gave limited attention to potential benefits claimed for generative systems. Coverage in the Financial Times, focused on Bender's broader public scholarship, situated the book within her long-standing critique of anthropomorphic narratives about large language models and her advocacy for more democratic oversight of automated systems.

  Read more →
• 

  Sports Card Investor

  Sports Card Investor is an American sports collectibles media platform and mobile application founded by Geoff Wilson. The platform provides market data, analysis, and editorial content focused on sports trading cards and related collectibles. It operates a website, mobile app, and digital media channels covering developments in the sports card industry. The company posted its first YouTube video in July 2019, shortly before a period of rapid growth in sports card collecting in the early 2020s, which was marked by increased trading volumes and mainstream media attention. == History == Sports Card Investor was founded by Geoff Wilson, an entrepreneur and collector who began publishing sports card–related content online before launching the platform's dedicated app and subscription tools. In February 2020, the company launched Market Movers, the first website and app to chart sports card prices and track card collections. The platform expanded its media presence through partnerships and distribution agreements. In 2023, Yahoo Sports announced a new collectibles coverage initiative that included additional content from Sports Card Investor. In February 2024, the Sports Card Investor studio relocated to CardsHQ in Atlanta, Georgia, and visitors to the facility can watch Sports Card Investor videos being filmed. == Platform and content == The Sports Card Investor app provides users with pricing data, portfolio-tracking tools, and market-trend analysis for trading cards. The company also produces video and editorial content discussing market developments, grading trends, and major card releases. Coverage in industry publications has referenced Sports Card Investor in discussions about shifts in sports card licensing rights and hobby market reactions. == Industry context == The growth of Sports Card Investor coincided with a broader resurgence in trading card markets, including record sales and expanded retail presence. Mainstream outlets have cited the company and its founder in reporting on collectibles investing trends, grading practices, and market volatility. The Sports Card Investor app has attracted over 37,000 reviews on the Apple App Store, reflecting its strong user engagement within the sports card community.

  Read more →
• 

  Voyages: The Trans-Atlantic Slave Trade Database

  Voyages: The Trans-Atlantic Slave Trade Database is a database hosted at Rice University that aims to present all documentary material pertaining to the transatlantic slave trade. It is a sister project to African Origins. The database breaks down the kingdoms and countries that engaged in the Atlantic trade. By 2008, the project had gathered data on nearly 35,000 transatlantic slave voyages from 1501 to 1867. For each voyage they sought to establish dates, owners, vessels, captains, African visits, American destinations, numbers of slaves embarked, and numbers landed. They have been able to find much of this material for an estimated 80 percent of the entire transatlantic African slave trade. With corrections for missing voyages, the Project has estimated the entire size of the transatlantic slave trade with more comprehension, precision, and accuracy than before. They reckon that in 366 years, slaving vessels embarked about 12.5 million captives in Africa, and landed 10.7 million in the New World. A horrific discovery is a careful estimate that the Middle Passage took a toll of more than 1.8 million African lives. In this quantitative database, the numbers are enslaved people.

  Read more →
• 

  Magiran

  Magiran (Persian: مگیران)—Iran's publications database—is a digital library that was founded in 2000 and includes digitized versions of scientific journals, which currently provides the possibility of searching among the full text of 1,500 journals. Registration is required for full access to the database, but access to some items such as newspapers is also possible without registration. A list of Iranian researchers is also maintained there.

  Read more →
• 

  Quantification (machine learning)

  In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation

  Read more →
• 

  WIPO GREEN

  WIPO GREEN is a World Intellectual Property Organization program established in 2013 that supports global efforts to address climate change and food security through sharing of sustainable technology innovations. == WIPO GREEN database == The WIPO GREEN database is the foundation of the platform. The database is a free, solutions-oriented, global innovation catalog that connects needs for solving environmental or climate change problems with sustainable solutions from prototypes to marketable products available for sale, license, collaborations, knowledge transfer, joint ventures, or collaborations. Green technology innovators can promote their products, businesses, organizations, and governments looking for green technologies can explain their needs and seek collaboration with providers. As of July 2022, WIPO GREEN has over 120,000 technologies, needs and experts, more than 2000 users in 110 countries, and has recorded over 1000 connections made between technology providers and seekers. The database utilizes AI-assisted auto-matching, user uploads tracing and alerts, full-text search for solutions based on long need descriptions, and the Patent2Solution search function for finding commercial applications of a patent, which are some of the unique features of the database. Free registration is required for detailed record view and uploading. All technologies uploaded to the WIPO GREEN database remain the property of the rights holder. It is up to the rights holder and the collaborating parties to structure agreements in the manner they feel is most appropriate and effective. WIPO GREEN does not require that technologies or innovations uploaded to the database be patented or in the process of being patented. Therefore, technology providers can upload their technology while related patent applications are pending. Technology providers are encouraged to upload technology solutions on the WIPO GREEN database and connect with other users to explore partnerships, technology transfers, including funding and licensing opportunities. == Acceleration projects == Acceleration projects work with WIPO GREEN partners and local organizations to explore local challenges and green opportunities for particular environmental needs. These projects are organized annually in different countries or regions around and connect providers and seekers of green technologies. For example, the Latin America Acceleration Project explores innovative new technologies in the region and facilitates green technology exchange between providers and seekers in green opportunities in intensified crop rotation, soil re-carbonization, and forest management in Argentina; zero-till or conservation agriculture in Brazil; and wine production in Chile. In October 2021, a project in Indonesia on palm oil mill effluent (POME), a by-product of palm oil production that emits greenhouse gases and reportedly harms flora and fauna in local rivers, identified viable green solutions to turn the high organic content of POME wastewater into biogas and other environmentally friendly uses. Former projects took place in Cambodia, Indonesia, and the Philippines around wastewater treatment, agriculture, and water technologies. == The Green Technology Book == In November 2022 at UNFCCC COP27, WIPO introduced its new Flagship publication the Green Technology Book. This digital-first publication aims to put innovation, technology and intellectual property at the forefront in the fight against climate change. The inaugural edition of this annual publication focused on available solutions for climate-change adaptation to reduce vulnerability as well as to increase resilience to the impacts of climate change. The book was created in cooperation with the Climate Technology Center and Network (CTCN) and the Egyptian Academy of Scientific Research and Technology (ASTR). It features 200 adaptation technologies, which are also available in the WIPO GREEN database of innovative technologies and needs. == Partners Network == WIPO GREEN partners are public or private institutions that wish to collaborate to advance WIPO GREEN’s mission. The network is aimed at helping the implementation and diffusion of green technology innovations around the world. Partners include government institutions, intergovernmental organizations, academia, and businesses – from small and medium-sized enterprises to Fortune 500 companies. As of 2022, WIPO GREEN has a network of over 146 partner organizations involved in green technology.

  Read more →
• 

  MetaMask

  MetaMask is a software cryptocurrency wallet developed by ConsenSys for interacting with the Ethereum blockchain and other EVM-compatible networks. It enables users to manage Ethereum accounts and connect to decentralized applications (dApps) via a browser extension or mobile app. As of early 2026, MetaMask reports over 100 million users worldwide. == Overview == MetaMask allows users to store and manage private keys, send and receive Ethereum-based cryptocurrencies and tokens (including ERC-20 and ERC-721 standards), broadcast transactions, and interact with dApps. dApps connect to the wallet via JavaScript interfaces, prompting users to approve signatures or transactions. The wallet features MetaMask Swaps, an in-app token swap aggregator sourcing liquidity from multiple decentralized exchanges (DEXs), with a service fee of 0.875%. In 2025, MetaMask introduced the MetaMask Rewards program (initially mobile-only), where users earn points for activities such as swaps, bridging, and referrals. Season 1 (October 2025 – January 2026) distributed over $30 million in Linea tokens and other perks to participants. == History == MetaMask launched in 2016 as open-source software under the MIT license. It initially supported browser extensions for Chrome and Firefox. Mobile versions were in closed beta from 2019 and publicly released for iOS and Android in September 2020. In August 2020, the license changed to a custom proprietary one. MetaMask Swaps launched on desktop in October 2020 and on mobile in March 2021. The Rewards program launched in late 2025 with Linea integration. == Criticism == MetaMask has faced criticism over privacy, including default analytics settings that share some user data (which can be disabled). Its reliance on Infura (acquired by ConsenSys in 2019) has raised concerns about centralization in Ethereum infrastructure. The wallet regularly issues warnings about phishing scams and fake airdrops impersonating MetaMask.

  Read more →
• 

  Comparison of operating systems

  These tables provide a comparison of operating systems, of computer devices, as listing general and technical information for a number of widely used and currently available PC or handheld (including smartphone and tablet computer) operating systems. The article "Usage share of operating systems" provides a broader, and more general, comparison of operating systems that includes servers, mainframes and supercomputers. Because of the large number and variety of available Linux distributions, they are all grouped under a single entry; see comparison of Linux distributions for a detailed comparison. There is also a variety of BSD and DOS operating systems, covered in comparison of BSD operating systems and comparison of DOS operating systems. == Nomenclature == The nomenclature for operating systems varies among providers and sometimes within providers. For purposes of this article the terms used are; kernel In some operating systems, the OS is split into a low level region called the kernel and higher level code that relies on the kernel. Typically the kernel implements processes but its code does not run as part of a process. hybrid kernel monolithic kernel Nucleus In some operating systems there is OS code permanently present in a contiguous region of memory addressable by unprivileged code; in IBM systems this is typically referred to as the nucleus. The nucleus typically contains both code that requires special privileges and code that can run in an unprivileged state. Typically some code in the nucleus runs in the context of a dispatching unit, e.g., address space, process, task, thread, while other code runs independent of any dispatching unit. In contemporary operating systems unprivileged applications cannot alter the nucleus. License and pricing policies vary widely among different systems. Among others, the tables below use the following terms: BSD BSD licenses are a family of permissive free software licenses, imposing minimal restrictions on the use and distribution of covered software. bundled The fee is included in the price of the hardware == General information == == Technical information == == Security == == Commands == For POSIX compliant (or partly compliant) systems like FreeBSD, Linux, macOS or Solaris, the basic commands are the same because they are standardized. NOTE: Linux systems may vary by distribution which specific program, or even 'command' is called, via the POSIX alias function. For example, if you wanted to use the DOS dir to give you a directory listing with one detailed file listing per line you could use alias dir='ls -lahF' (e.g. in a session configuration file).

  Read more →
• 

  BabyCenter

  BabyCenter is an online media company based in San Francisco, New York City, Chicago, and Los Angeles that provides information on conception, pregnancy, birth, and early childhood development for parents and expecting parents. BabyCenter operates 8 country and region specific properties including websites, apps, emails, print publications, and an online community where parents can connect on a variety of topics. The visitors of website and the users of the app can sign up for free weekly email newsletters that guide them through pregnancy and their child's development. In addition to publishing detailed, medically reviewed information about pregnancy and parenting, BabyCenter, under its Mission Motherhood initiative, ran numerous social programs and has participated in public health initiatives in partnership with hospitals, healthcare agencies, nonprofits, NGOs, and government agencies to provide pregnancy and parenting advice. It also annually publishes the most popular baby names. BabyCenter LLC is part of the Everyday Health Group, a division of Ziff Davis. == History == BabyCenter was founded in October 1997 by Stanford University MBA graduates Matt Glickman and Mark Selcow, who recognized a need for information about pregnancy and parenting on the internet. BabyCenter was initially funded through $13.5 million in startup capital funding from venture capital firms, including Bessemer Venture Partners, Intel, and Trinity Ventures. The funds were used to open the BabyCenter Store in October 1998. In the early years of its operation, BabyCenter offered multiple resources and services for parents, including a website that provided medically reviewed information and guidance to new and expectant parents on such topics as fertility, labor, and childcare; a weekly email for pregnant women tailored to their week of pregnancy (based on their pregnancy due date); and community groups and chat rooms for pregnant couples and parents to discuss pregnancy and child-rearing strategies. The site grew quickly, and by early 1999 had 175 employees and an annual revenue of $35 million. In April of that year, the two founders sold BabyCenter to another website, eToys.com, for $190 million in stock. Twenty-three months later, in 2001, shortly before declaring bankruptcy, eToys sold the site to Johnson & Johnson for $10 million. During the eToys ownership, BabyCenter launched its first international E-commerce site in the UK during the spring of 2000. Starting in 2005, BabyCenter launched an expansion plan, extending its global network to Australia, Canada and other countries, staffing each outpost with local editors. In 2007, BabyCenter debuted a Mandarin-language site in China, initiated operations in India, launched a Spanish language website, and introduced its first mobile site. BabyCenter released My Pregnancy Today, its first mobile app, to Apple's App Store in August 2010 and to the Android market in April 2011. The app provided daily information, nutrition tips, advice relevant to the user's week of pregnancy, and 3-D animated videos showcasing a baby's development in utero. The My Pregnancy app was joined by a My Baby Today app in October 2011. In 2015, BabyCenter released Mom Feed, its first mobile app for parents of toddlers and older children (ages 1 to 8). Mom Feed offered personalized, stage-based information as well as content from the BabyCenter Community and Blog in a real-time stream. In 2016, BabyCenter launched its web-based Baby Names Finder. In 2018, Mom Feed was discontinued and BabyCenter replaced that experience with a separate Child Health content area on its website. Also in 2018, BabyCenter launched its mobile baby name generator, the Baby Names app, which, like the web-based Baby Names Finder, leverages data from hundreds of thousands of parents that culminates in its annual most popular Baby Names Report. In 2019, Johnson & Johnson sold Baby Center to Everyday Health Group, a division of New York-based parent company of Ziff Davis, Inc. Neither side disclosed terms of the deal. == Popular research == BabyCenter's most popular baby names is released annually and often cited by the media. In March 2024, BabyCenter did a review of the app Temu and said that the website has found products that have been recalled, could be counterfeit or circumvent U.S. safety standards and features that are important in preventing issues like choking. In 2025, BabyCenter released a report about the cost of raising a newborn baby in the first year. == Content and products == === Websites === BabyCenter has 8 country and region-specific websites around the world, including sites for the United States, Canada, Australia, Brazil, India, Germany, the United Kingdom, and Latin America. Users can find parenting and pregnancy advice in seven languages: English, Spanish, Portuguese, Arabic, French, German, and Hindi BabyCenter content for each country- or region-specific site is written by an editorial team based in that country or region. Medical and health content for each site is reviewed by a medical advisory board based there and adheres to that country or region's medical standards. For example, the U.S. site works with and follows the recommendations of such U.S. medical authorities as the American Academy of Pediatrics, the American Congress of Obstetrics & Gynecology and the Society for Maternal-Fetal Medicine. BabyCenter regularly conducts research and provides thought leadership on pregnancy and parenting topics, popularly cited by major media outlets including The Wall Street Journal, Forbes, The Washington Post, BuzzFeed, Insider, MarketWatch, Axios. === Community, blogs and social === From its earliest days, BabyCenter has had a community area that allows people to join a group of parents with children born in the same month, known as a Birth Club. BabyCenter launched a blog called Momformation in 2007. Eventually, the name was changed to BabyCenter Blog. In April 2021, the BabyCenter Community was identified in a research article within the journal PLOS Computational Biology as facilitating "unobstructed communication" between parents, which avoids the "strong echo chamber phenomena" that can foster and perpetuate vaccine misinformation. === My Pregnancy and Baby Today App === The app is available in six languages, although not all features are supported for every market. Initially the apps only featured pregnancy articles that could be found on the BabyCenter website, but over the years the feature set has expanded to include a growing list of app-specific tools such as weekly fetal development information, a kick tracker, a birth plan worksheet, a contraction timer, a baby growth tracker, a photo journal for pregnant women to record their pregnancy bellies, and a photo journal for documenting a baby's first year. === Mission Motherhood™ === BabyCenter was a cofounder of the Mobile Alliance for Maternal Action (MAMA), a public-private partnership between USAID, Johnson & Johnson, the UN Foundation, and BabyCenter from 2011 to-to 2015. The MAMA program sparked the creation of MomConnect, an initiative of the South African Department of Health for which BabyCenter developed SMS messages with health information about pregnancy and a child's first year of life. BabyCenter helped develop similar messages for mMitra, a voice messaging program in India. A research article in the Maternal and Child Health Journal stated the mMitra program offered strong evidence "that tailored mobile phone voice messages can improve key infant care knowledge and practices that lead to improved infant health outcomes in low-resource settings. BabyCenter's Mission Motherhood Messages were available to qualifying organizations on the BabyCenter website. BabyCenter contributed websites for Free Basics. These websites featured age and stage-based pregnancy and baby articles targeted to low-income, lower-education women who would not otherwise have access to health information. Content developed for this program was also used to support a UNICEF SMS program during the 2016 Zika outbreak. == Awards and recognition == In 1998, BabyCenter won a Webby Award for Best Home Site. Since then, it has been nominated for a Webby Award 19 times and won either a Webby or a People's Choice Webby Award 12 times – including a People's Voice win in 2021 for Lifestyle websites and mobile sites. In 2002, it won Service Journalism award from Online Journalism Awards (OJA). In 2015, BabyCenter won five Digital Health Awards for content about autism in children. In 2016, BabyCenter won seven Digital Health Awards: four for videos about the aches and pains of pregnancy, baby sleep, and the walking milestone in child development; two for articles about baby sleep training and sleep apnea in babies; and one for the BabyCenter mobile app My Pregnancy & Baby Today. In 2021, Forbes Health chose My Pregnancy & Baby Today as the best pregnancy app of 2021, and Women's Health identified it

  Read more →
• 

  Data access layer

  A data access layer (DAL) is a software architectural layer that provides access to data from one or more sources, such as a relational database, NoSQL database, SQL query engine, file system, or other persistent storage. It separates client code from the details of storage systems, query execution, connection handling, and data retrieval. Data access layers are commonly used to centralize data access logic, reduce coupling between applications and data sources, and provide a consistent interface for retrieving, writing, or querying data. Depending on the system, a data access layer may be implemented as application code, a shared library, an intermediary service, or part of a broader database abstraction layer. == In application architecture == In application software, a data access layer provides a boundary between business logic or application code and the systems used to store or retrieve data. For example, a data access layer may expose methods or interfaces for retrieving, writing, or querying data while hiding details such as connection management, SQL statements, storage APIs, error handling, and result conversion. Depending on the application, the layer may return objects, records, tabular results, documents, streams, or other representations of data. A common implementation is a set of classes, functions, or methods that directly reference database queries, stored procedures, storage APIs, or other data sources. For example, instead of using commands such as insert, delete, and update throughout an application to access a specific table, methods such as registerUser or loginUser may be implemented inside the data access layer. Business logic methods from an application can also be mapped to the data access layer. Instead of making several database queries directly, an application can call a single DAL method that abstracts those database calls. Applications using a data access layer may be either dependent on or independent from a particular database server. If the data access layer supports multiple database systems, the application can use any database system that the DAL can access. In either case, the data access layer provides a centralized location for calls into the underlying data store, which can make it easier to maintain, test, or port the application to other storage systems. == Implementation patterns == A data access layer can be implemented using several patterns and technologies, including data access objects, repositories, stored procedures, query builders, database drivers, or object–relational mapping tools. These mechanisms may implement part or all of a data access layer, but are not always equivalent to the layer itself. Object–relational mapping tools are commonly used in data access layers for object-oriented applications that map records in a relational database to objects in a programming language. Other data access layers may expose lower-level database interfaces, tabular results, document-oriented data, files, streams, or protocol-level interfaces. == Use with multiple underlying data systems == A data access layer may be used to abstract differences between multiple underlying data systems, allowing applications to access them through a more consistent interface. In such designs, applications call the DAL rather than interacting directly with each database or storage system. The layer may then handle connection management, query generation, result mapping, error handling, and other implementation details. A data access layer may be implemented as a shared library or as an intermediary service, such as a proxy or gateway. In this configuration, client applications or services connect to the data access layer, which then communicates with one or more underlying databases or query engines. This can provide a common location for authentication, authorization, logging, routing, and translation between different database interfaces. == Interfaces and protocols == Data access layers may expose or use standardized interfaces and protocols for database access. Examples include Open Database Connectivity (ODBC), Java Database Connectivity (JDBC), database-native wire protocols, and newer interfaces such as Apache Arrow Database Connectivity (ADBC) and Arrow Flight SQL. In systems that support multiple data stores, a data access layer may provide a consistent interface while using different drivers, protocols, or query mechanisms internally. == Distinction from related patterns == A data access layer is related to, but broader than, a data access object, which is usually an object-oriented design pattern for encapsulating access to a persistence mechanism. It is also related to a database abstraction layer, which focuses on hiding differences between database systems. In practice, the terms may overlap.

  Read more →
• 

  Parkerian Hexad

  The Parkerian Hexad is a set of six elements of information security proposed by Donn B. Parker in 1998. The Parkerian Hexad adds three additional attributes to the three classic security attributes of the CIA triad (confidentiality, integrity, availability). The Parkerian Hexad attributes are the following: Confidentiality Possession or Control Integrity Authenticity Availability Utility These attributes of information are atomic in that they are not broken down into further constituents; they are non-overlapping in that they refer to unique aspects of information. Any information security breach can be described as affecting one or more of these fundamental attributes of information. == Attributes from the CIA triad == === Confidentiality === Confidentiality refers to the "quality or state of being private or secret; known only to a limited few", or "the property that information is not made available or disclosed to unauthorized individuals, entities, or processes". For example: If an enterprise's strategic plans are leaked to competitors then this is a breach of confidentiality; If unauthorized persons gain access to an individual's financial records then that individual's confidentiality is breached. === Integrity === Integrity refers to being correct or consistent with the intended state of information. Any unauthorized modification of data, whether deliberate or accidental, is a breach of data integrity. For example: Data stored on disk are expected to be stable. If the data is changed at random by problems with a disk controller then this is a breach of integrity; Data generated by a medical device is transmitted and stored in the healthcare center but neither altered nor tampered with; Application programs are supposed to record information correctly. If the application introduces deviations from the intended values then this is a breach of integrity. "From Donn Parker: My definition of information integrity comes from the dictionaries. Integrity means that the information is whole, sound, and unimpaired (not necessarily correct). It means nothing is missing from the information it is complete and in intended good order". === Availability === Availability means having timely access to information. For example: A disk crash or denial-of-service attacks both cause a breach of availability. Any delay in response of a system that exceeds the expected service levels for that system can be described as a breach of availability. GPS jamming can lead to loss of Availability of the GPS system. == Parker's added attributes == === Authenticity === Authenticity is the "quality of being authentic or of established authority for truth and correctness". Parker defines it thus: "is the information genuine and accurate? Does it conform to reality and have validity?" and "authoritative, valid, true, real, genuine, or worthy of acceptance or belief by reason of conformity to fact and reality". === Possession or control === Possession or control refers to the loss of data by the authorized user (even if the ʺthiefʺ cannot access the data). From a control systems perspective, it is any loss of control (the ability to change settings and functions) or loss of view (the ability to monitor the system’s operation and its response to controls). Suppose a thief were to steal a sealed envelope containing a bank debit card and its personal identification number. Even if the thief did not open that envelope, it's reasonable for the victim to be concerned that the thief could do so at any time. That situation illustrates a loss of control or possession of information but does not involve the breach of confidentiality. === Utility === Utility refers to the data's usefulness. For example: Suppose someone encrypted data on disk to prevent unauthorized access or undetected modifications–and then lost the decryption key: that would be a breach of utility. The data would be confidential, controlled, integral, authentic, and available–they just wouldn't be useful in that form. The conversion of salary data from one currency into an inappropriate currency would be a breach of utility, as would the storage of data in a format inappropriate for a specific computer architecture; e.g., EBCDIC instead of ASCII or 9-track magnetic tape instead of DVD-ROM. A tabular representation of data substituted for a graph could be described as a breach of utility if the substitution made it more difficult to interpret the data. Utility is often confused with availability because breaches such as those described in these examples may also require time to work around the change in data format or presentation. However, the concept of usefulness is distinct from that of availability.

  Read more →