AI Content Internet Study

AI Content Internet Study — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Waveform graphics

  Waveform graphics is a simple vector graphics system introduced by Digital Equipment Corporation (DEC) on the VT55 and VT105 terminals in the mid-1970s. It was used to produce graphics output from mainframes and minicomputers. DEC used the term "waveform graphics" to refer specifically to the hardware, but it was used more generally to describe the whole system. The system was designed to use as little computer memory as possible. At any given X location it could draw two dots at given Y locations, making it suitable for producing two superimposed waveforms, line charts or histograms. Text and graphics could be mixed, and there were additional tools for drawing axes and markers. The waveform graphics system was used only for a short period of time before it was replaced by the more sophisticated ReGIS system, first introduced on the VT125 in 1981. ReGIS allowed the construction of arbitrary vectors and other shapes. Whereas DEC normally provided a backward compatible solution in newer terminal models, they did not choose to do this when ReGIS was introduced, and waveform graphics disappeared from later terminals. == Description == Waveform graphics was introduced on the VT55 terminal in October 1975, an era when memory was extremely expensive. Although it was technically possible to produce a bitmap display using a framebuffer using technology of the era, the memory needed to do so at a reasonable resolution was typically beyond the price point that made it practical. All sorts of systems were used to replace computer memory with other concepts, like the storage tubes used in the Tektronix 4010 terminals, or the zero memory racing-the-beam system used in the Atari 2600. DEC chose to attack this problem through a clever use of a small buffer representing only the vertical positions on the screen. Such a system could not draw arbitrary shapes, but would allow the display of graph data. The system was based on a 512 by 236 pixel display, producing 512 vertical columns along the X-axis, and 236 horizontal rows on the Y-axis. Y locations were counted up from the bottom, so the coordinate 0,0 was in the lower left, and 511, 235 in the upper right. Had this been implemented using a framebuffer with each location represented by a single bit, 512 × 236 × 1 = 120,832 bits, or 15,104 bytes, would have been required. At the time, memory cost about $50 per kilobyte, so the buffer alone would cost over $700 (equivalent to $4,570 in 2025). Instead, the waveform graphic system used one byte of memory for each X axis location, with the byte's value representing the Y location. This required only 512 bytes for each graph, a total of 1024 bytes for the two graphs. Drawing a line required the programmer to construct a series of Y locations and send them as individual points, the terminal could not connect the dots itself. To make this easier, the terminal automatically incremented the X location every time an Y coordinate was received, so a graph line could be sent as a long string of numbers for subsequent Y locations instead of having to repeatedly send the X location every time. Drawing normally started by sending a single instruction to set the initial X location, often 0 on the left, and then sending in data for the entire curve. The system also included storage for up to 512 markers on both lines. These were always drawn centered on the Y value of the line they were associated with, meaning that a simple on/off indication for X locations was all that was needed, requiring only 1024 bits, or 128 bytes, in total. The markers extended 16 pixels vertically, and could only be aligned on 16-pixel boundaries, so they were not necessarily centered across the underlying graph. Markers were used to indicate important points on the graph, where a symbol of some sort would normally be used. The system also allowed a vertical line to be drawn for every horizontal location and a horizontal one at every vertical location. These were also stored as simple on/off bits, requiring another 128 bytes of memory. These lines were used to draw axes and scale lines, or could be used for a screen-spanning crosshair cursor. A separate set of two 7-bit registers held additional information about the drawing style and other settings. Although complex from the user's perspective, this system was easy to implement in hardware. A cathode ray tube produces a display by scanning the screen in a series of horizontal motions, moving down one vertical line after each horizontal scan. At any given instant during this process, the display hardware examines a few memory locations to see if anything needs to be displayed. For instance, it can determine whether to draw a marker on graph 0 by examining register 1 to see if markers are turned on, looking in the marker buffer to see if there is a 1 at the current X location, and then examining the Y location of graph 0 to see if it is within 16 pixels of the current scan line. If all of these are true, a spot is drawn to present that portion of the marker. As this will be true for 16 vertical locations during the scanning process, a 16-pixel high marker will be drawn. Sold alone, the VT55 was priced at $2,496 (equivalent to $16,295 in 2025),. Like other models of the VT50 series, the terminal could be equipped with an optional wet-paper printer in a panel on the right of the screen. This added $800 (equivalent to $5,223 in 2025) to the price. DEC also offered VT55 in a package with a small model of the PDP-11 to create one model of the DEClab 11/03 system. The DEClab normally sold for $14,000 (equivalent to $91,397 in 2025) with a DECwriter II (LA36) hard-copy terminal for $15,000 (equivalent to $97,925 in 2025), with the VT55. The system had I/O channels for up to 15 lab devices, and included libraries for FORTRAN and BASIC for reading the data and creating graphs. The fairly extensive VT55 Programmers Manual covered the latter in depth. == Commands and data == Data was sent to the terminal using an extended set of codes similar to those introduced on the VT52. VT52 codes generally started with the ESC character (octal 33, decimal 27) and was then followed by a single letter instruction. For instance, the string of four characters ESC H ESC J would reposition the cursor in the upper left (home) and then clear the screen from that point down. These codes were basically modeless; triggered by the ESC the resulting escape mode automatically exited again when the command was complete. Escape codes could be interspersed with display text anywhere in the stream of data. In contrast, the graphics system was entirely modal, with escape sequences being sent to cause the terminal to enter or exit graph drawing mode. Data sent between these two codes were interpreted by the graphics hardware, so text and graphics could not be mixed in a single stream of instructions. Graphics mode was entered by sending the string ESC 1, and exited again with the string ESC 2. Even the commands within the graphics mode were modal; characters were interpreted as being additional data for the previous load character (command) until another load character is seen. Ten load characters were available: @ - no operation, used to tell the terminal the last command is no longer active A - load data into register 0, selecting the drawing mode for the two graphs I - load data into register 1, selecting other drawing options H - load the starting X position (Horizontal) for the following commands B - load data for Y locations for graph 0 starting at the H position selected earlier J - load data for Y locations for graph 1 starting at the H position selected earlier C - store a marker on graph 0 at the following X location K - store a marker on graph 1 at the following X location D - draw a horizontal line at the given Y location L - draw a vertical line at the given X location X and Y locations were sent as 10-bit decimal numbers, encoded as ASCII characters, with 5 bits per character. This means that any number within the 1024 number space (210) can be stored as a string of two characters. To ensure the characters can be transmitted over 7-bit links, the pattern 01 is placed in front of both 5-bit numbers, producing 7-bit ASCII values that are always within the printable range. This results in a somewhat complex encoding algorithm. For instance, if one wanted to encode the decimal value 102, first you convert that to the 10-bit decimal pattern 0010010010. That is then split that into upper and lower 5-bit parts, 00100 and 10010. Then append 01 binary to produce 7-bit numbers 0100100 and 0110010. Individually convert back to decimal 40 and 50, and then look up those characters in an ASCII chart, finding ( and 2. These have to be sent to the terminal least significant character first. If these were being used to set the X coordinate, the complete string would be H2(. When used as X and Y locations for the graphs, extra digits were ignored. For instance, the 512 pixel X axis r

  Read more →
• 

  Eduroam

  eduroam (a portmanteau of education and roaming) is an international Wi-Fi internet access roaming service for users in research, higher education and further education. It provides researchers, teachers, and students network access when visiting an institution other than their own. Users are authenticated with credentials from their home institution, regardless of the location of the eduroam access point. Authorization to access the Internet and other resources are handled by the visited institution. Users do not have to pay to use eduroam. In some countries, Internet access via eduroam is also available at other locations than the participating institutions, e.g. in libraries, public buildings, railway stations, city centres and airports. It is also available at many primary and secondary education institutions in Brazil and the US. == History == The eduroam initiative started in 2002 when during the preparations for the creation of TERENA's task force TF-Mobility, Klaas Wierenga of SURFnet shared the idea of combining a RADIUS-based infrastructure with IEEE 802.1X technology to provide roaming network access across research and education networks. Initially, the service was joined by institutions in the Netherlands, Germany, Finland, Portugal, Croatia and the United Kingdom. Later, other NRENs in Europe embraced the idea and started joining the infrastructure, which was then called eduroam. Since 2004, the European Union co-funded further research and development work related to the eduroam service through the GN2 and GN3 projects. From September 2007, the European Union also funded through these projects the continued operation and maintenance of the eduroam service at the European level. The first non-European country to join eduroam was Australia, in December 2004. In Canada, eduroam started as an initiative of the University of British Columbia, which was later taken over by CANARIE as a service of its Canadian Access Federation. In the United States, eduroam was initially a pilot project between the National Science Foundation and the University of Tennessee (UTK). In 2012, Internet2 announced the addition of eduroam to its NET+ service offerings. AnyRoam LLC, a private company, was formed by former UTK staff to serve as an Internet2 active corporate member administering the US top-level servers. In 2021, Internet2 assumed direct management of the eduroam service for US-based organizations. == Technology == The eduroam service uses IEEE 802.1X as the authentication method and a hierarchical system of RADIUS servers. The hierarchy typically consists of RADIUS servers at the participating institutions, national RADIUS servers run by the National Roaming Operators, and regional top-level RADIUS servers for individual world regions. In some cases, institutions contact each other directly via DNS lookups () When a user visits a remote institution, the user's device presents their credentials to the local RADIUS server. That RADIUS server discovers that it is not responsible for the realm of the user's home institution and proxies the access request to another RADIUS server, typically the national RADIUS server. If the visited institution is in a different country than the home institution, the request is in turn proxied to the regional top-level RADIUS server, and then to the national RADIUS server of the user's home country. That national server forwards the credentials to the home institution, where they are verified. The RADIUS response travels back over the proxy-hierarchy to the visited institution and the user is granted access. In eduroam, the user credentials are always presented in the form of an EAP method (). The EAP method is responsible for ensuring that the users credentials are secure, and private. The users credentials can then travel via a number of intermediate servers, not under the control of the home institution of the user. This requirement limits the types of EAP methods that can be used. EAP methods which do not provide for security or privacy of user credentials cannot be used in eduroam. The most commonly used EAP methods in eduroam are EAP-TLS, PEAP, and EAP-TTLS. The methods used generally fall into two broad categories: those that use credentials in the form of some public-key mechanism with certificates and those that use so-called tunnelled authentication with "inner" passwords or other credentials. Most institutions use a tunnelled authentication method that requires a server certificate. These server certificates are used to set up a secure tunnel between the mobile device and the authentication server, through which the user credentials (e.g. name and password) are securely transported. A complication arises if the user's home institution does not use a two-letter country-code top-level domain as part of its realm, but a generic top-level domain such as .edu or .org. By inspection of such realms, it is not possible to determine which national RADIUS server the request should be routed to. Such domains will thus, by default, fail to work in international roaming. The workaround for this problem involves the creation of exceptions in the international RADIUS request routing tables; however, this workaround does not scale as the number of exception entries grows. Several solutions have been proposed to eliminate this workaround in the future, the most promising of which is RADIUS over TLS with Dynamic Discovery, which does not rely on static routing tables inside a RADIUS server configuration to route requests to their proper destination. Instead, the participating institution adds one NAPTR DNS resource record to its own domain's DNS zone, which states by which server eduroam authentication for the domain is handled. == Governance == GÉANT has established a lightweight global governance structure. Recognising the large variety in the organisation and funding of research and education (networking) in different countries and regions, rules imposed on the operations of eduroam are limited to technical and administrative requirements that are necessary to ensure the smooth and secure operations of eduroam worldwide. Moreover, the eduroam operators have the leading role in creating and maintaining the rules of the global eduroam governance. The Global eduroam Governance Committee (GeGC) has the central role in the global eduroam governance structure. While its structure has evolved over time, it presently has three representatives from each of five regions — mirroring those used by the Regional Internet registries — serving a two-year term. In addition, GÉANT may appoint one or more experts as non-voting members of the GeGC. == Geographical deployment == eduroam is available at selected locations in countries with a National Roaming Operator that has signed the eduroam Compliance Statement. Those sixty-seven countries are listed below. In addition, there may be pilot deployments in countries that are in the process of joining eduroam. === Middle East === eduroam is deployed in: === Europe === The NRENs that are members of the consortium of the GN3 project have joined the European eduroam confederation by signing the confederation's policy that requires its members to comply with a set of technical and organisational requirements, which are more specific than those in the global eduroam Compliance Statement. As a consequence, eduroam is deployed in the following countries: In addition, three NRENs that are associate members of the consortium of the GN3 project without voting rights joined the European eduroam confederation; they represent Belarus (UIIP), Moldova (RENAM) and Russia (Joint Supercomputer Center of the Russian Academy of Sciences). Finally, five NRENs not involved in the GN3 project joined the European eduroam confederation on a voluntary basis, enabling the deployment of the service in: The European top-level RADIUS servers are operated by SURFnet and Forskningsnettet. === Asia-Pacific === eduroam is deployed in the following countries and economies: The Asia-Pacific top-level RADIUS servers are operated by AARNet and by the University of Hong Kong. === North America === eduroam is deployed in: === Latin America === eduroam is deployed in: === Africa === eduroam is deployed in: The inter-African RADIUS servers are operated by West-African research and education network WACREN, the UbuntuNet Alliance and TENET.

  Read more →
• 

  Brooklyn Bridge (software)

  The Brooklyn Bridge from White Crane Systems was a data transfer enabler. Although it came with some hardware, it was the software which was the basis of the product. It also could transform the data's format. == Overview == The New York Times described its category as being among "communications packages used to transfer files." In an era of 300 baud, Brooklyn Bridge operated at "115,200 baud" so that a transfer which "at 300 baud took 4 minutes and 36 seconds" only needed 5 seconds. Unlike some communications packages, this one retains the original version-date, so as not to alarm people when they seem to have what looks like an update, when it's not. == Description == Once the software is installed, users comfortable with typing the word "COPY" can do so as readily as they sneakernet. An earlier review described it as "less cumbersome than conventional communications software" The use of neither specialized hardware nor specialized software is ideal in an era when this can be done using online or other "outside" services.

  Read more →
• 

  Strong cryptography

  Strong cryptography or cryptographically strong are general terms used to designate the cryptographic algorithms that, when used correctly, provide a very high (usually insurmountable) level of protection against any eavesdropper, including the government agencies. There is no precise definition of the boundary line between the strong cryptography and (breakable) weak cryptography, as this border constantly shifts due to improvements in hardware and cryptanalysis techniques. These improvements eventually place the capabilities once available only to the NSA within the reach of a skilled individual, so in practice there are only two levels of cryptographic security, "cryptography that will stop your kid sister from reading your files, and cryptography that will stop major governments from reading your files" (Bruce Schneier). The strong cryptography algorithms have high security strength, for practical purposes usually defined as a number of bits in the key. For example, the United States government, when dealing with export control of encryption, considered as of 1999 any implementation of the symmetric encryption algorithm with the key length above 56 bits or its public key equivalent to be strong and thus potentially a subject to the export licensing. To be strong, an algorithm needs to have a sufficiently long key and be free of known mathematical weaknesses, as exploitation of these effectively reduces the key size. At the beginning of the 21st century, the typical security strength of the strong symmetrical encryption algorithms is 128 bits (slightly lower values still can be strong, but usually there is little technical gain in using smaller key sizes). Demonstrating the resistance of any cryptographic scheme to attack is a complex matter, requiring extensive testing and reviews, preferably in a public forum. Good algorithms and protocols are required (similarly, good materials are required to construct a strong building), but good system design and implementation is needed as well: "it is possible to build a cryptographically weak system using strong algorithms and protocols" (just like the use of good materials in construction does not guarantee a solid structure). Many real-life systems turn out to be weak when the strong cryptography is not used properly, for example, random nonces are reused A successful attack might not even involve algorithm at all, for example, if the key is generated from a password, guessing a weak password is easy and does not depend on the strength of the cryptographic primitives. A user can become the weakest link in the overall picture, for example, by sharing passwords and hardware tokens with the colleagues. == Background == The level of expense required for strong cryptography originally restricted its use to the government and military agencies, until the middle of the 20th century the process of encryption required a lot of human labor and errors (preventing the decryption) were very common, so only a small share of written information could have been encrypted. US government, in particular, was able to keep a monopoly on the development and use of cryptography in the US into the 1960s. In the 1970, the increased availability of powerful computers and unclassified research breakthroughs (Data Encryption Standard, the Diffie-Hellman and RSA algorithms) made strong cryptography available for civilian use. Mid-1990s saw the worldwide proliferation of knowledge and tools for strong cryptography. By the 21st century the technical limitations were gone, although the majority of the communication were still unencrypted. At the same the cost of building and running systems with strong cryptography became roughly the same as the one for the weak cryptography. The use of computers changed the process of cryptanalysis, famously with Bletchley Park's Colossus. But just as the development of digital computers and electronics helped in cryptanalysis, it also made possible much more complex ciphers. It is typically the case that use of a quality cipher is very efficient, while breaking it requires an effort many orders of magnitude larger - making cryptanalysis so inefficient and impractical as to be effectively impossible. == Cryptographically strong algorithms == This term "cryptographically strong" is often used to describe an encryption algorithm, and implies, in comparison to some other algorithm (which is thus cryptographically weak), greater resistance to attack. But it can also be used to describe hashing and unique identifier and filename creation algorithms. See for example the description of the Microsoft .NET runtime library function Path.GetRandomFileName. In this usage, the term means "difficult to guess". An encryption algorithm is intended to be unbreakable (in which case it is as strong as it can ever be), but might be breakable (in which case it is as weak as it can ever be) so there is not, in principle, a continuum of strength as the idiom would seem to imply: Algorithm A is stronger than Algorithm B which is stronger than Algorithm C, and so on. The situation is made more complex, and less subsumable into a single strength metric, by the fact that there are many types of cryptanalytic attack and that any given algorithm is likely to force the attacker to do more work to break it when using one attack than another. There is only one known unbreakable cryptographic system, the one-time pad, which is not generally possible to use because of the difficulties involved in exchanging one-time pads without them being compromised. So any encryption algorithm can be compared to the perfect algorithm, the one-time pad. The usual sense in which this term is (loosely) used, is in reference to a particular attack, brute force key search — especially in explanations for newcomers to the field. Indeed, with this attack (always assuming keys to have been randomly chosen), there is a continuum of resistance depending on the length of the key used. But even so there are two major problems: many algorithms allow use of different length keys at different times, and any algorithm can forgo use of the full key length possible. Thus, Blowfish and RC5 are block cipher algorithms whose design specifically allowed for several key lengths, and who cannot therefore be said to have any particular strength with respect to brute force key search. Furthermore, US export regulations restrict key length for exportable cryptographic products and in several cases in the 1980s and 1990s (e.g., famously in the case of Lotus Notes' export approval) only partial keys were used, decreasing 'strength' against brute force attack for those (export) versions. More or less the same thing happened outside the US as well, as for example in the case of more than one of the cryptographic algorithms in the GSM cellular telephone standard. The term is commonly used to convey that some algorithm is suitable for some task in cryptography or information security, but also resists cryptanalysis and has no, or fewer, security weaknesses. Tasks are varied, and might include: generating randomness encrypting data providing a method to ensure data integrity Cryptographically strong would seem to mean that the described method has some kind of maturity, perhaps even approved for use against different kinds of systematic attacks in theory and/or practice. Indeed, that the method may resist those attacks long enough to protect the information carried (and what stands behind the information) for a useful length of time. But due to the complexity and subtlety of the field, neither is almost ever the case. Since such assurances are not actually available in real practice, sleight of hand in language which implies that they are will generally be misleading. There will always be uncertainty as advances (e.g., in cryptanalytic theory or merely affordable computer capacity) may reduce the effort needed to successfully use some attack method against an algorithm. In addition, actual use of cryptographic algorithms requires their encapsulation in a cryptosystem, and doing so often introduces vulnerabilities which are not due to faults in an algorithm. For example, essentially all algorithms require random choice of keys, and any cryptosystem which does not provide such keys will be subject to attack regardless of any attack resistant qualities of the encryption algorithm(s) used. == Legal issues == Widespread use of encryption increases the costs of surveillance, so the government policies aim to regulate the use of the strong cryptography. In the 2000s, the effect of encryption on the surveillance capabilities was limited by the ever-increasing share of communications going through the global social media platforms, that did not use the strong encryption and provided governments with the requested data. Murphy talks about a legislative balance that needs to be struck between the power of the government that are broad enough to be able to follow the qui

  Read more →
• 

  Adobe Encore

  Adobe Encore (previously Adobe Encore DVD) was a DVD authoring software tool produced by Adobe Systems and targeted at professional video producers. Video and audio resources could be used in their current format for development, allowing the user to transcode them to MPEG-2 video and Dolby Digital audio upon project completion. DVD menus could be created and edited in Adobe Photoshop using special layering techniques. Adobe Encore did not support writing to a Blu-ray Disc using AVCHD 2.0. Encore is bundled with Adobe Premiere Pro CS6. Adobe Encore CS6 was the last release. While Premiere Pro CC has moved to the Creative Cloud, Encore has now been discontinued. == Licensing == All forms of Adobe Encore used a proprietary licensing system from its developer, Adobe Systems. Versions 1.0 and 1.5 required a separate license fee (rather than making 1.5 available as a free update). Version 3, also known as CS3, was sold only in bundle with Premiere CS3. Encore CS4, CS5, CS5.5 and CS6 were only sold in the Premiere Pro CS4, CS5, CS5.5 and CS6 bundles, respectively. Adobe CC subscribers no longer have access to Adobe Encore CS6. Adobe Encore is not included with Premiere Pro CC. == Functionality == Adobe Encore allowed for creating interactive DVD menus from Photoshop documents, which could be tweaked from within Encore. Video and audio streams could be embedded in the DVD and be made to play when certain elements of the menu are interacted with. It had similar functionality to Adobe Flash and Premiere Pro, due to its ability to both edit video on a timeline and embed interactive content.

  Read more →
• 

  Change data capture

  In databases, change data capture (CDC) is a set of software design patterns used to determine and track the data that has changed (the "deltas") so that action can be taken using the changed data. The result is a delta-driven dataset. CDC is an approach to data integration that is based on the identification, capture and delivery of the changes made to enterprise data sources. For instance it can be used for incremental update of data loading. CDC occurs often in data warehouse environments since capturing and preserving the state of data across time is one of the core functions of a data warehouse, but CDC can be utilized in any database or data repository system. == Methodology == System developers can set up CDC mechanisms in a number of ways and in any one or a combination of system layers from application logic down to physical storage. In a simplified CDC context, one computer system has data believed to have changed from a previous point in time, and a second computer system needs to take action based on that changed data. The former is the source, the latter is the target. It is possible that the source and target are the same system physically, but that would not change the design pattern logically. Multiple CDC solutions can exist in a single system. === Timestamps on rows === Tables whose changes must be captured may have a column that represents the time of last change. Names such as LAST_UPDATE, LAST_MODIFIED, etc. are common. Any row in any table that has a timestamp in that column that is more recent than the last time data was captured is considered to have changed. Timestamps on rows are also frequently used for optimistic locking so this column is often available. === Version numbers on rows === Database designers give tables whose changes must be captured a column that contains a version number. Names such as VERSION_NUMBER, etc. are common. One technique is to mark each changed row with a version number. A current version is maintained for the table, or possibly a group of tables. This is stored in a supporting construct such as a reference table. When a change capture occurs, all data with the latest version number is considered to have changed. Once the change capture is complete, the reference table is updated with a new version number. (Do not confuse this technique with row-level versioning used for optimistic locking. For optimistic locking each row has an independent version number, typically a sequential counter. This allows a process to atomically update a row and increment its counter only if another process has not incremented the counter. But CDC cannot use row-level versions to find all changes unless it knows the original "starting" version of every row. This is impractical to maintain.) === Status indicators on rows === This technique can either supplement or complement timestamps and versioning. It can configure an alternative if, for example, a status column is set up on a table row indicating that the row has changed (e.g., a boolean column that, when set to true, indicates that the row has changed). Otherwise, it can act as a complement to the previous methods, indicating that a row, despite having a new version number or a later date, still shouldn't be updated on the target (for example, the data may require human validation). === Time/version/status on rows === This approach combines the three previously discussed methods. As noted, it is not uncommon to see multiple CDC solutions at work in a single system, however, the combination of time, version, and status provides a particularly powerful mechanism and programmers should utilize them as a trio where possible. The three elements are not redundant or superfluous. Using them together allows for such logic as, "Capture all data for version 2.1 that changed between 2005-06-01 00:00 and 2005-07-01 00:00 where the status code indicates it is ready for production." === Triggers on tables === May include a publish/subscribe pattern to communicate the changed data to multiple targets. In this approach, triggers log events that happen to the transactional table into another queue table that can later be "played back". For example, imagine an Accounts table, when transactions are taken against this table, triggers would fire that would then store a history of the event or even the deltas into a separate queue table. The queue table might have schema with the following fields: Id, TableName, RowId, Timestamp, Operation. The data inserted for our Account sample might be: 1, Accounts, 76, 2008-11-02 00:15, Update. More complicated designs might log the actual data that changed. This queue table could then be "played back" to replicate the data from the source system to a target. Data capture offers a challenge in that the structure, contents and use of a transaction log is specific to a database management system. Unlike data access, no standard exists for transaction logs. Most database management systems do not document the internal format of their transaction logs, although some provide programmatic interfaces to their transaction logs (for example: Oracle, DB2, SQL/MP, SQL/MX and SQL Server 2008). Other challenges in using transaction logs for change data capture include: Coordinating the reading of the transaction logs and the archiving of log files (database management software typically archives log files off-line on a regular basis). Translation between physical storage formats that are recorded in the transaction logs and the logical formats typically expected by database users (e.g., some transaction logs save only minimal buffer differences that are not directly useful for change consumers). Dealing with changes to the format of the transaction logs between versions of the database management system. Eliminating uncommitted changes that the database wrote to the transaction log and later rolled back. Dealing with changes to the metadata of tables in the database. CDC solutions based on transaction log files have distinct advantages that include: minimal impact on the database (even more so if one uses log shipping to process the logs on a dedicated host). no need for programmatic changes to the applications that use the database. low latency in acquiring changes. transactional integrity: log scanning can produce a change stream that replays the original transactions in the order they were committed. Such a change stream include changes made to all tables participating in the captured transaction. no need to change the database schema == Confounding factors == As often occurs in complex domains, the final solution to a CDC problem may have to balance many competing concerns. === Unsuitable source systems === Change data capture both increases in complexity and reduces in value if the source system saves metadata changes when the data itself is not modified. For example, some Data models track the user who last looked at but did not change the data in the same structure as the data. This results in noise in the Change Data Capture. === Tracking the capture === Actually tracking the changes depends on the data source. If the data is being persisted in a modern database then Change Data Capture is a simple matter of permissions. Two techniques are in common use: Tracking changes using database triggers Reading the transaction log as, or shortly after, it is written. If the data is not in a modern database, CDC becomes a programming challenge. === Push versus pull === Push: the source process creates a snapshot of changes within its own process and delivers rows downstream. The downstream process uses the snapshot, creates its own subset and delivers them to the next process. Pull: the target that is immediately downstream from the source, prepares a request for data from the source. The downstream target delivers the snapshot to the next target, as in the push model. === Alternatives === Sometimes the slowly changing dimension is used as an alternative method. CDC and SCD are similar in that both methods can detect changes in a data set. The most common forms of SCD are type 1 (overwrite), type 2 (maintain history) or 3 (only previous and current value). SCD 2 can be useful if history is needed in the target system. CDC overwrites in the target system (akin to SCD1), and is ideal when only the changed data needs to arrive at the target, i.e. a delta-driven dataset.

  Read more →
• 

  Myrinet

  Myrinet, ANSI/VITA 26-1998, is a high-speed local area networking system designed by the company Myricom to be used as an interconnect between multiple machines to form computer clusters. == Description == Myrinet was promoted as having lower protocol overhead than standards such as Ethernet, and therefore better throughput, less interference, and lower latency while using the host CPU. Although it can be used as a traditional networking system, Myrinet is often used directly by programs that "know" about it, thereby bypassing a call into the operating system. Earlier versions of Myrinet used a variety of media and connectors: Generation 2 used copper media with DC-37 (Myrinet-LAN, M2L- controllers and switches) or microribbon (Myrinet-SAN, M2M-) connectors. Generation 3 used copper media with HSSDC (Myrinet-Serial, M3S-) or microribbon (Myrinet-SAN, M3M-) connectors, or fiber with LC-connectors (Myrinet-Fiber, M3F-). The later versions of Myrinet physically consist of two fibre optic cables, upstream and downstream, connected to the host computers with a single connector. Machines are connected via low-overhead routers and switches, as opposed to connecting one machine directly to another. Myrinet includes a number of fault-tolerance features, mostly backed by the switches. These include flow control, error control, and "heartbeat" monitoring on every link. The "fourth-generation" Myrinet, called Myri-10G, supported a 10 Gbit/s data rate and can use 10 Gigabit Ethernet on PHY, the physical layer (cables, connectors, distances, signaling). Myri-10G started shipping at the end of 2005. Myrinet was approved in 1998 by the American National Standards Institute for use on the VMEbus as ANSI/VITA 26-1998. One of the earliest publications on Myrinet is a 1995 IEEE article. === Performance === Myrinet is a lightweight protocol with little overhead that allows it to operate with throughput close to the basic signaling speed of the physical layer. For supercomputing, the low latency of Myrinet is even more important than its throughput performance, since, according to Amdahl's law, a high-performance parallel system tends to be bottlenecked by its slowest sequential process, which in all but the most embarrassingly parallel supercomputer workloads is often the latency of message transmission across the network. === Deployment === According to Myricom, 141 (28.2%) of the June 2005 TOP500 supercomputers used Myrinet technology. In the November 2005 TOP500, the number of supercomputers using Myrinet was down to 101 computers, or 20.2%, in November 2006, 79 (15.8%), and by November 2007, 18 (3.6%), a long way behind gigabit Ethernet at 54% and InfiniBand at 24.2%. In the June 2014 TOP500 list, the number of supercomputers using Myrinet interconnect was 1 (0.2%). In November 2013, the assets of Myricom (including the Myrinet technology) were acquired by CSP Inc. In 2016, it was reported that Google had also offered to buy the company.

  Read more →
• 

  Blocknots

  Blocknots were random sequences of numbers contained in a book and organized by numbered rows and columns and were used as additives in the reciphering of Soviet Union codes, during World War II. The Blocknot consisted of a booklet of fifty sheets of 5-figure random additive, 100 additive groups to a sheet. No sheet was used more than once, thus the blocknots were in effect a form of one-time pad. The Soviet Unions highest grade ciphers that were used in the East, were the 5-figure codebook enciphered with the Blocknot book, and were generally considered unbreakable. == Technical Description == Blocknots were distributed centrally from an office in Moscow. Every Blocknot contained 5-figure groups in a number of sheets, for the enciphering of 5-figure messages. The encipherment was effected by applying additives taken from the pad, of which 50-100 5-figure groups appeared. Each pad had a 5-figure number and each sheet had a 2-figure number running consecutively. There were 5 different types of Blocknots, in two different categories The Individual in which each table of random numbers was used only once. The General in which each page of the Blocknot was valid for one day. The security of the additive sequence rested on the choice of different starting points for each message. In 5-figure messages, the blocknot was one of the first 10 Groups in the message. Its position changed at long intervals, but was always easy to re-identify. The Russians differentiated between three types of blocks: The 3-block, DRIERBLOCK. I-block for Individual Block: 50 pages, additive read off in one direction only. The messages could be used and read only between 2 wireless telegraphy stations on one net. The 6-block, SECHSERBLOCK. Z-block for Circular Block: 30 pages, additive read off in either direction. The messages could be used and read, between all W/T stations in a net. The 2-block, ZWEIERBLOCK. OS-block. Used only in traffic from lower to higher formations. Two other types were used, in lower echelons. Notblock: Used in an emergency. Blocknot used for passing on traffic. The distribution of Blocknots was carried out centrally from Moscow to Army Groups then to Armies. The Army was responsible for their distribution throughout the lower levels of the army down to company level. Independent units took their cipher material with them. Occasionally the same blocknot was distributed to two units on different parts of the front, which enabled Depth to be established. Records of all Blocknots used were kept in Berlin and when a repeat was noticed a BLOCKNOT ANGEBOT message was sent out to all German Signals units, to indicate that it may have been possible to break the code using it. There was no certainty in this. A cryptanalyst with the General der Nachrichtenaufklärung stated while being interrogated by TICOM: It seems that depths of up to 8 were established at the beginning of the Russian Campaign but that no 5-figure code was broken after May 1943 German cryptanalysts who were prisoners of war stated under interrogation, that each of the figures 0 to 9 were placed en clair usually within the first ten groups of the text or sometimes at the end. One indicator was the Blocknot number and the consisted of two random figures, the figure representing the type, and the remaining two, the page of the Blocknot being used. In long messages, 000000 was placed in the message when the end of a page had been reached. == Chi number == The Chi-number was the serial numbering of all 5-figure messages passing through the hands of the Cipher Officer, starting on the first of January and ending on thirty-first December of the current year. It always appeared as the last group in an intercepted message, e.g. 00001 on the 1st January, or when the unit was newly set up. The progression of Chi-numbers was carefully observed and recorded in the form of a graph. A Russian corps had about 10 5-figure messages per day, and Army about 20-30 and a Front about 60–100. After only a relatively short time, the individual curves separated sharply and the type of formation could be recognized by the height of the Chi-number alone. == Monitoring == Blocknots were tracked in a card index, that was maintained by the Signal Intelligence Evaluation Centre (NAAS). The NAAS functionality included evaluation and traffic analysis, cryptanalysis, collation and dissemination of intelligence. The card index, which was one amongst several Card Indexes. A careful recording and study of blocks provided the positive clues in the identification and tracking of formations using 5-figure ciphers. The index was subdivided into two files: Search card index, contained all blocknots and chi-numbers whether or not they were known. Unit card index, contained only known Block and Chi-numbers. Inspector Berger, who was the chief cryptanalyst of NAAS 1 stated that the two files formed: The most important and surest instruments for identifying Russian radio nets, known to him. The Blocknots were also used in the Stationary Intercept Company (Feste), the military unit that were designed to work at a lower level to the NAAS, at the Army level and were semi-motorized, and closer to the front. The Feste used the Blocknot value along with several other parameters to build a network diagram. The network diagram was studied extensively, as part of a 6-stage process, that involved several departments within the Feste. The outcome was a metric which determined the most interesting circuit for traffic monitoring, and least interesting, where monitoring of traffic should cease. == Analysis == Johannes Marquart was a mathematician and cryptanalyst who initially worked for Inspectorate 7/VI and later led Referat Ia of Group IV of the General der Nachrichtenaufklärung. Marquart was assigned the study of the Soviet Union Blocknot traffic. Marquart and his unit conducted extensive research in an attempt to discover the method by which they were produced. All the counts which they made, however, failed to reveal any non-random characteristics in the design of the tables, and while they thought the Blocknots must have been generated by machine, they were never able to draw any concrete deductions as a result of their research. == Example == The Soviet 3rd Guard Tank Army transmits a 5-figure message with the Blocknot of 37581 (one of the first 10 groups in the message). On the same day the Block 37582 was used by the same formation. The next day 37583 appeared. Thereafter, for a period, the Army was not heard by German Wireless telegraphy intercept operators, as it was maintaining wireless silence. After a few days, an unidentified net with the Blocknot 37588 is picked up. This message net is claimed, because of the proximity of the blocks (88/83) to be the 3rd Guard Tank Army. The missing Blocknots 84-87 were presumably used in telegraphic, telephonic or courier communications. The Chi number provides confirmation of the first assumption, based on proximity of blocknots in most cases.

  Read more →
• 

  NetOwl

  NetOwl is a suite of multilingual text and identity analytics products that analyze big data in the form of text data – reports, web, social media, etc. – as well as structured entity data about people, organizations, places, and things. NetOwl utilizes artificial intelligence (AI)-based approaches, including natural language processing (NLP), machine learning (ML), and computational linguistics, to extract entities, relationships, and events; to perform sentiment analysis; to assign latitude/longitude to geographical references in text; to translate names written in foreign languages; and to perform name matching and identity resolution. NetOwl's uses include semantic search and discovery, geospatial analysis, intelligence analysis, content enrichment, compliance monitoring, cyber threat monitoring, risk management, and bioinformatics. == History == The first NetOwl product was NetOwl Extractor, which was initially released in 1996. Since then, Extractor has added many new capabilities, including relationship and event extraction, categorization, name translation, geotagging, and sentiment analysis, as well as entity extraction in other languages. Other products were added later to the NetOwl suite, namely TextMiner, NameMatcher, and EntityMatcher. NetOwl has participated in several 3rd party-sponsored text and entity analytics software benchmarking events. NetOwl Extractor was the top-scoring named entity extraction system at the DARPA-sponsored Message Understanding Conference MUC-6 and the top-scoring link and event extraction system in MUC-7. It was also the top-scoring system at several of the NIST-sponsored Automatic Content Extraction (ACE) evaluation tasks. NetOwl NameMatcher was the top-scoring system at the MITRE Challenge for Multicultural Person Name Matching. == Products == The NetOwl suite includes, among others, the following text and entity analytics products: === Text Analytics === NetOwl Extractor performs entity extraction from unstructured texts using natural language processing (NLP), machine learning (ML), and computational linguistics. Extractor also performs semantic relationship and event extraction as well as geotagging of text. It is used for a variety of data sources including both traditional sources (e.g., news, reports, web pages, email) and social media (e.g., Twitter, Facebook, chats, blogs). It runs on a variety of Big Data analytics platforms, including Apache Hadoop and LexisNexis’s High-Performance Computer Cluster (HPCC) technology. It has been integrated with a number of 3rd party analytical tools such as Esri ArcGIS and Google Earth/Maps. === Identity Analytics === NetOwl NameMatcher and EntityMatcher perform name matching and identity resolution for large multicultural and multilingual entity databases using machine learning (ML) and computational linguistics approaches. They are used for applications such as anti–money laundering (AML), watch lists, regulatory compliance, fraud detection, etc.

  Read more →
• 

  Coreu

  COREU (French: Correspondance Européenne – Telex network of European correspondents, also EUKOR-Netzwerk in Austria) is a communication network of the European Union for the communication of the Council of the European Union, the European correspondents of the foreign ministries of the EU member states, permanent representatives of member states in Brussels, the European Commission, and the General Secretariat of the Council of the European Union. The European Parliament is not among the participants. COREU is the European equivalent of the American Secret Internet Protocol Router Network (SIPRNet, also known as Intelink-S). COREU's official aim is fast communication in case of crisis. The network enables a closer cooperation in matters regarding foreign affairs. In actuality the system's function exceeds that of mere communication, it also enables decision-making. COREU's first goal is to enable the exchange of information before and after decisions. Relaying upfront negotiations in preparation of meetings is the second goal. In addition, the system also allows the editing of documents and the decision-making, especially if there is little time. While the first two goals are preparatory measures for a shared foreign policy, the third is a methodical variant marked by practise that is defining for the image of the Common Foreign and Security Policy. == Members == (The following information dates from 2013): There is one representative in each of the capital cities in the EU.(since 1973) In Germany for example, this is the European correspondent (EU-KOR) from the Foreign Office. In Austria it is the European correspondent from the Referat II.1.a in the Federal Ministry for Europe, Integration and Foreign Affairs They are the correspondents (since 1982) for the European Commission They comprise the secretariat for the European Council They also make up the European External Action Service (EEAS) (responsible for foreign policy issues, since 1987) == Data volume and technical details == COREU functions as a spoke-hub distribution paradigm system with the hub in Brussels. The network is operated by the European Union Intelligence and Situation Centre (formerly Joint Situation Center, JSC). The technical infrastructure is located in a building of the European Council. COREU may be described as an advanced telex system with encrypted messages via dedicated terminals. Once a message has reached the destination, it is then redistributed via the local media. In contrast, messages of governments are transmitted via local media to the correspondents and from there delivered point-to-point to Brussels via COREU. In 2010, approximately 8500 communications had been distributed over this network. == History == A telex-based communication system under the name COREU was established in 1973. Originally, only the ministries of Foreign Affairs in the European capitals were connected to it. This telex system was replaced in 1997 by the mail system CORTESY (COREU Terminal Equipment System). The name was retained despite the technical innovation. COREU was reportedly compromised by hackers working for the People's Liberation Army Strategic Support Force, allowing for the theft of thousands of low-classified documents and diplomatic cables.

  Read more →
• 

  Data Management Association

  The Data Management Association (DAMA), formerly known as the Data Administration Management Association, is a global not-for-profit organization which aims to advance concepts and practices about information management and data management. It describes itself as vendor-independent, all-volunteer organization, and has a membership consisting of technical and business professionals. Its international branch is called DAMA International (or DAMA-I), and DAMA also has various continental and national branches around the world. == History == The Data Management Association International was founded in 1980 in Los Angeles. Other early chapters were: San Francisco, Portland, Seattle, Minneapolis, New York, and Washington D.C. == Data Management Body of Knowledge == DAMA has published the Data Management Body of Knowledge (DMBOK), which contains suggestions on best practices and suggestions of a common vernacular for enterprise data management. The first edition (DAMA-DMBOK) was published on 2009 November 1, the second edition (DAMA-DMBOK2) was published on 2017 July 1., and the Revised second edition (DAMA-DMBOK2 rev.2) was published on 2019 March 19. DMBOK has been described by the authors as being an "equivalent" to the Project Management Body of Knowledge (PMBOK) and Business Analysis Body of Knowledge (BABOK). It encompasses topics such as data architecture, security, quality, modelling, governance, big data, data science, and more. DMBOK also includes the DAMA Data Wheel, an infographic which represents core data management practices. The center of the infographic is data governance, and the surrounding segments each represent a different aspect of data management: Data architecture Data modeling and design Data storage and operations Data security Data integration and interoperability Document management Content management Master data management Reference data and master data Data warehousing Metadata management Data quality Business intelligence Data science == Professional Accreditation == DAMA also provides a professional data management certification for individuals known as a Certified Data Management Professional (CDMP), which is based on the DMBOK as a study reference. There are four levels of certification based on career experience and exam results. The highest level, Fellow, requires 25 years of experience and nomination by DAMA members. It is an example of one of many competing certifications for data management professionals.

  Read more →
• 

  Viber

  Rakuten Viber, commonly known as Viber, is a cross-platform voice over IP (VoIP) and instant messaging (IM) software application owned by the Japanese technology company Rakuten Group. The service is available as freeware for Android, iOS, Microsoft Windows, macOS and Linux. Users are registered and identified through a mobile phone number, although the service can also be accessed on desktop platforms without mobile connectivity. In addition to instant messaging, the platform allows users to exchange media such as images, videos and files, and provides a paid international calling service called Viber Out. The software was launched in 2010 by the company Viber Media, founded by Talmon Marco and Igor Magazinnik. Rakuten acquired Viber Media in 2014 and later renamed the company Rakuten Viber. The company is headquartered in Cyprus and maintains offices in London, Manila, Paris, San Francisco, Singapore, Tokyo and Beijing. == History == === Founding (2010) === Viber Media was founded in Tel Aviv, Israel, in 2010 by Talmon Marco and Igor Magazinnik. Marco and Magazinnik are also co-founders of the peer-to-peer media and file-sharing client iMesh. The company was run from Israel and was registered in Cyprus. Sani Maroli and Ofer Smocha soon joined the company as well. Marco said Viber allows instant calling and synchronization with contacts because the ID is the user's cell number. In its early days, Viber relied on a patchwork of outsourcing partners from different countries, commissioning specific solutions from external vendors — including teams based in Cyprus and Belarus. According to the company's statements, development of Viber's core functionality historically originated from its Tel Aviv office — a testament to its roots — even though the legal entity was registered elsewhere. === Early monetisation (2011) === In its first two years of availability, Viber did not generate revenues. It began doing so in 2013, via user payments for Viber Out voice calling and the Viber graphical messaging "sticker market". The company was originally funded by individual investors, described by Marco as "friends and family". They invested $20 million in the company, which had 120 employees as of May 2013. On 24 July 2013, Viber's support system was defaced by the Syrian Electronic Army. According to Viber, no sensitive user information was accessed. By the time Rakuten came forward with its acquisition deal in 2014, Viber had already stopped working with external vendors, choosing instead to consolidate development under its own offices. === Rakuten acquires Viber (2014) === On 13 February 2014, Rakuten announced they had acquired Viber Media for $900 million, and since then Viber has been owned by Rakuten, Inc., an e-commerce conglomerate headquartered in Tokyo. The sale of Viber earned the Shabtai family (Benny, his brother Gilad, and Gilad's son Ofer) some $500 million from their 55.2% stake in the company. At that sale price, the founders each realized over 30 times return on their investments. Later that year, the company established a UK presence with the incorporation of Viber UK Limited in London. Djamel Agaoua became Viber Media CEO in February 2017, replacing co-founder Marco who left in 2015. In July 2017 the corporate name of Viber Media was changed to Rakuten Viber and a new wordmark logo was introduced. Its legal name remains Viber Media, S.à r.l. based in Luxembourg. === Post-acquisition === In August 2015 Viber opened a regional office for Central and Eastern Europe in Sofia to support growth in the region. In 2017, Rakuten Viber and the World Wildlife Fund engaged in a commercial transaction aimed at raising awareness and protecting wildlife. After first using Viber to spread its message in June 2020, the International Federation of the Red Cross launched an official chatbot and community on the messaging app to combat the spread of false information, which they termed an infodemic, about COVID-19. The chatbot is still active as of June 2022, with over 1.4 million subscribers. In 2020, Rakuten Viber and the World Health Organization (the WHO) engaged in a commercial transaction for a chatbot to inform users of issues such as women's health. and an anti-smoking campaign. In the wake of the July–August 2020 Belarusian election protests, to avoid sanctions and harassment from monopolies the company closed its office in Minsk. In 2022, Ofir Eyal became Viber CEO, replacing Djamel Agaoua. Eyal is a Viber veteran; he worked as Vice President of Product in 2014 before his promotion to Chief Operating Officer in 2019. Shortly after the appointment of a new CEO, Viber continued its international expansion. In March 2022, Rakuten announced the opening of a development center in Tbilisi, Georgia, intended to support work on mobile applications and technology projects in the region. In July 2022, Rakuten Viber partnered with Rapyd to launch instant cross-border P2P payments. The company launched payments on the Viber app first in Greece and Germany, and then in other countries. In August, Mineski teamed up with Viber to develop a social minigame platform that can play off Viber's application. In May 2022, Rakuten Viber launched the premium chat service Viber Plus that offers exclusive features, including sticker market privileges, ad-free use, priority Viber support, exclusive badge, unique Viber icon, large file sharing, and more. In 2022, Viber joined the European Union’s Code of Conduct on countering illegal hate speech online. As part of this framework, the company undertook to review reported content and remove material identified as hate speech in accordance with the Code and its platform rules. In January 2024 Rakuten (the company behind Viber) established an office in Kyiv to bring together engineering and marketing departments. Alongside launching its Kyiv office the company joined Diia.City as a resident. Subsequently in October 2024 Rakuten Viber inaugurated an office in Manila to broaden its operations, in the Philippines. The company’s legal entity remains Viber Media S.à r.l., registered in Luxembourg. Viber’s engineering work has been carried out across multiple countries and through external partners, including outsourcing and near-shore vendors. As a result, its development operations are distributed internationally rather than concentrated in a single location. In December 2024, Viber was blocked in Russia. Roskomnadzor announced the nationwide blocking of the messaging app due to non-compliance with local legal requirements. == Security audit == On 4 November 2014, Viber scored 1 out of 7 points on the Electronic Frontier Foundation's "Secure Messaging Scorecard". Viber received a point for encryption during transit but lost points because communications were not encrypted with keys that the provider did not have access to (i.e. the communications were not end-to-end encrypted), users could not verify contacts' identities, past messages were not secure if the encryption keys were stolen (i.e. the service did not provide forward secrecy), the code was not open to independent review (i.e. the code was not open-source), the security design was not properly documented, and there had not been a recent independent security audit. On 14 November 2014, the EFF changed Viber's score to 2 out of 7 after it had received an external security audit from Ernst & Young's Advanced Security Centre. On 19 April 2016, with the announcement of Viber version 6.0, Rakuten added end-to-end encryption to their service. The company said that the encryption protocol had only been audited internally, and promised to commission external audits "in the coming weeks". In May 2016, Viber published an overview of their encryption protocol, saying that it is a custom implementation that "uses the same concepts" as the Signal Protocol. In 2022, Rakuten Viber won a Security Award, by test.de, a tech firm based in Germany where there are over 3 million Viber users. In 2024, Rakuten Viber received SOC certification following an audit conducted by Ernst & Young. The certification relates to the company’s controls for data protection and information security. == Market share == As of December 2016, Viber had 800 million registered users. According to Statista, there are 260 million monthly active users as of January 2019. The Viber messenger is very popular in the Philippines, Greece, Eastern Europe, Russia, the Middle East, and some Asian markets. India was the largest market for Viber as of December 2014 with 33 million registered users, the fifth most popular instant messenger in the country. At the same time there were 30 million users in the United States, 28 million in Russia and 18 million in Brazil. Viber is particularly popular in Eastern Europe, being the most downloaded messaging app on Android in Belarus, Moldova and Ukraine as of 2016. It is also popular in Iraq, Libya and Nepal. Viber is translated in 44 languages and used in more than 190 co

  Read more →
• 

  Mountain car problem

  Mountain Car, a standard testing domain in Reinforcement learning, is a problem in which an under-powered car must drive up a steep hill. Since gravity is stronger than the car's engine, even at full throttle, the car cannot simply accelerate up the steep slope. The car is situated in a valley and must learn to leverage potential energy by driving up the opposite hill before the car is able to make it to the goal at the top of the rightmost hill. The domain has been used as a test bed in various reinforcement learning papers. == Introduction == The mountain car problem, although fairly simple, is commonly applied because it requires a reinforcement learning agent to learn on two continuous variables: position and velocity. For any given state (position and velocity) of the car, the agent is given the possibility of driving left, driving right, or not using the engine at all. In the standard version of the problem, the agent receives a negative reward at every time step when the goal is not reached; the agent has no information about the goal until an initial success. == History == The mountain car problem appeared first in Andrew Moore's PhD thesis (1990). It was later more strictly defined in Singh and Sutton's reinforcement learning paper with eligibility traces. The problem became more widely studied when Sutton and Barto added it to their book Reinforcement Learning: An Introduction (1998). Throughout the years many versions of the problem have been used, such as those which modify the reward function, termination condition, and the start state. == Techniques used to solve mountain car == Q-learning and similar techniques for mapping discrete states to discrete actions need to be extended to be able to deal with the continuous state space of the problem. Approaches often fall into one of two categories, state space discretization or function approximation. === Discretization === In this approach, two continuous state variables are pushed into discrete states by bucketing each continuous variable into multiple discrete states. This approach works with properly tuned parameters but a disadvantage is information gathered from one state is not used to evaluate another state. Tile coding can be used to improve discretization and involves continuous variables mapping into sets of buckets offset from one another. Each step of training has a wider impact on the value function approximation because when the offset grids are summed, the information is diffused. === Function approximation === Function approximation is another way to solve the mountain car. By choosing a set of basis functions beforehand, or by generating them as the car drives, the agent can approximate the value function at each state. Unlike the step-wise version of the value function created with discretization, function approximation can more cleanly estimate the true smooth function of the mountain car domain. === Eligibility traces === One aspect of the problem involves the delay of actual reward. The agent is not able to learn about the goal until a successful completion. Given a naive approach for each trial the car can only backup the reward of the goal slightly. This is a problem for naive discretization because each discrete state will only be backed up once, taking a larger number of episodes to learn the problem. This problem can be alleviated via the mechanism of eligibility traces, which will automatically backup the reward given to states before, dramatically increasing the speed of learning. Eligibility traces can be viewed as a bridge from temporal difference learning methods to Monte Carlo methods. == Technical details == The mountain car problem has undergone many iterations. This section focuses on the standard well-defined version from Sutton (2008). === State variables === Two-dimensional continuous state space. V e l o c i t y = ( − 0.07 , 0.07 ) {\displaystyle Velocity=(-0.07,0.07)} P o s i t i o n = ( − 1.2 , 0.6 ) {\displaystyle Position=(-1.2,0.6)} === Actions === One-dimensional discrete action space. m o t o r = ( l e f t , n e u t r a l , r i g h t ) {\displaystyle motor=(left,neutral,right)} === Reward === For every time step: r e w a r d = − 1 {\displaystyle reward=-1} === Update function === For every time step: A c t i o n = [ − 1 , 0 , 1 ] {\displaystyle Action=[-1,0,1]} V e l o c i t y = V e l o c i t y + ( A c t i o n ) ∗ 0.001 + cos ⁡ ( 3 ∗ P o s i t i o n ) ∗ ( − 0.0025 ) {\displaystyle Velocity=Velocity+(Action)0.001+\cos(3Position)(-0.0025)} P o s i t i o n = P o s i t i o n + V e l o c i t y {\displaystyle Position=Position+Velocity} === Starting condition === Optionally, many implementations include randomness in both parameters to show better generalized learning. P o s i t i o n = − 0.5 {\displaystyle Position=-0.5} V e l o c i t y = 0.0 {\displaystyle Velocity=0.0} === Termination condition === End the simulation when: P o s i t i o n ≥ 0.6 {\displaystyle Position\geq 0.6} == Variations == There are many versions of the mountain car which deviate in different ways from the standard model. Variables that vary include but are not limited to changing the constants (gravity and steepness) of the problem so specific tuning for specific policies become irrelevant and altering the reward function to affect the agent's ability to learn in a different manner. An example is changing the reward to be equal to the distance from the goal, or changing the reward to zero everywhere and one at the goal. Additionally, a 3D mountain car can be used, with a 4D continuous state space.

  Read more →
• 

  Group key

  In cryptography, a group key is a cryptographic key that is shared between a group of users. Typically, group keys are distributed by sending them to individual users, either physically, or encrypted individually for each user using either that user's pre-distributed private key. A common use of group keys is to allow a group of users to decrypt a broadcast message that is intended for that entire group of users, and no one else. For example, in the Second World War, group keys (known as "iodoforms", a term invented by a classically educated non-chemist, and nothing to do with the chemical of the same name) were sent to groups of agents by the Special Operations Executive. These group keys allowed all the agents in a particular group to receive a single coded message. In present-day applications, group keys are commonly used in conditional access systems, where the key is the common key used to decrypt the broadcast signal, and the group in question is the group of all paying subscribers. In this case, the group key is typically distributed to the subscribers' receivers using a combination of a physically distributed secure cryptoprocessor in the form of a smartcard and encrypted over-the-air messages.

  Read more →
• 

  Star Awards for Social Media Award

  The Star Awards for Social Media Award was an award presented annually from 2014 to 2016 at the Star Awards, where Mediacorp of Singapore recognises entertainers under their employment with awards for artistic and technical merit for outstanding performances of the year. == History == The category was introduced in 2014, at the 20th Star Awards ceremony; Jeanette Aw received the award and it is given in honour of a Mediacorp artiste with the most social media engagement. The results are based on the calculations from three international social media analysis systems; artistes must be active on at least one of the following platforms in order to qualify: Facebook, Twitter and Instagram. Since its inception, the award has been given to two artistes. Carrie Wong is the most recent and final winner in this category. Since the ceremony held in 2016, Aw remains as the only artiste to win in this category twice, surpassing Wong who has one win. The award was discontinued from 2017 onwards as the popularity element of the award is already represented in the Top 10 Most Popular Male Artistes and Top 10 Most Popular Female Artistes awards. == Recipients ==

  Read more →