AI Content Internet Study

AI Content Internet Study — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Subvocal recognition

    Subvocal recognition

    Subvocal recognition (SVR) is the process of taking subvocalization and converting the detected results to a digital output, aural or text-based. A silent speech interface is a device that allows speech communication without using the sound made when people vocalize their speech sounds. It works by the computer identifying the phonemes that an individual pronounces from nonauditory sources of information about their speech movements. These are then used to recreate the speech using speech synthesis. == Input methods == Silent speech interface systems have been created using ultrasound and optical camera input of tongue and lip movements. Electromagnetic devices are another technique for tracking tongue and lip movements. The detection of speech movements by electromyography of speech articulator muscles and the larynx is another technique. Another source of information is the vocal tract resonance signals that get transmitted through bone conduction called non-audible murmurs. They have also been created as a brain–computer interface using brain activity in the motor cortex obtained from intracortical microelectrodes. == Uses == Such devices are created as aids to those unable to create the sound phonation needed for audible speech such as after laryngectomies. Another use is for communication when speech is masked by background noise or distorted by self-contained breathing apparatus. A further practical use is where a need exists for silent communication, such as when privacy is required in a public place, or hands-free data silent transmission is needed during a military or security operation. In 2002, the Japanese company NTT DoCoMo announced it had created a silent mobile phone using electromyography and imaging of lip movement. The company stated that "the spur to developing such a phone was ridding public places of noise," adding that, "the technology is also expected to help people who have permanently lost their voice." The feasibility of using silent speech interfaces for practical communication has since then been shown. In 2019, Arnav Kapur, a researcher from the Massachusetts Institute of Technology, conducted a study known as AlterEgo. Its implementation of the silent speech interface enables direct communication between the human brain and external devices through stimulation of the speech muscles. By leveraging neural signals associated with speech and language, the AlterEgo system deciphers the user's intended words and translates them into text or commands without the need for audible speech. == Research and patents == With a grant from the U.S. Army, research into synthetic telepathy using subvocalization is taking place at the University of California, Irvine under lead scientist Mike D'Zmura. NASA's Ames Research Laboratory in Mountain View, California, under the supervision of Charles Jorgensen is conducting subvocalization research. The Brain Computer Interface R&D program at Wadsworth Center under the New York State Department of Health has confirmed the existing ability to decipher consonants and vowels from imagined speech, which allows for brain-based communication using imagined speech, however using EEGs instead of subvocalization techniques. US Patents on silent communication technologies include: US Patent 6587729 "Apparatus for audibly communicating speech using the radio frequency hearing effect", US Patent 5159703 "Silent subliminal presentation system", US Patent 6011991 "Communication system and method including brain wave analysis and/or use of brain activity", US Patent 3951134 "Apparatus and method for remotely monitoring and altering brain waves". Latter two rely on brain wave analysis. == In fiction == The decoding of silent speech using a computer played an important role in Arthur C. Clarke's story and Stanley Kubrick's associated film A Space Odyssey. In this, HAL 9000, a computer controlling spaceship Discovery One, bound for Jupiter, discovers a plot to deactivate it by the mission astronauts Dave Bowman and Frank Poole through lip reading their conversations. In Orson Scott Card's series (including Ender's Game), the artificial intelligence can be spoken to while the protagonist wears a movement sensor in his jaw, enabling him to converse with the AI without making noise. He also wears an ear implant. In Speaker for the Dead and subsequent novels, author Orson Scott Card described an ear implant, called a "jewel", that allows subvocal communication with computer systems. Author Robert J. Sawyer made use of subvocal recognition to allow silent commands to the cybernetic 'companion implants' used by the advanced Neanderthal characters in his Neanderthal Parallax trilogy of science fiction novels. In Earth, David Brin depicts this technology and its uses as a normal gear in the near future. In Down and Out in the Magic Kingdom, Cory Doctorow has cellphone technology become silent through a cochlear implant and miking the throat to pick up subvocalization. William Gibson's Sprawl Trilogy frequently uses sub-vocalization systems in various devices. In Kage Baker's Company novels, the immortal cyborgs communicate subvocally. In the Hugo Award-winning Hyperion Cantos by Dan Simmons, the characters often use subvocalization to communicate. In the Culture novels by Iain M. Banks, more highly advanced species often communicate subvocally through their technology. In Deus Ex: Human Revolution (2011), the protagonist is augmented with a subvocalization implant for sending covert communications (and a corresponding cochlear implant for receiving covert communications). In the tabletop RPG and video game series Shadowrun, player characters can communicate via subvocal microphones in some instances. In Paranoia, all citizens can speak to the computer via their "cerebral cortech" implants. Alistair Reynolds Revelation Space trilogy frequently uses sub-vocalization systems in various devices.

    Read more →
  • Electronic submission

    Electronic submission

    Electronic submission refers to the submission of a document by electronic means: that is, via e-mail or a web form on the Internet, or on an electronic medium such as a compact disc, a hard disk or a USB flash drive. Traditionally, the term "manuscript" referred to anything that was explicitly "written by hand". However, in popular usage and especially in the context of computers and the internet, the term "manuscript" may even refer to documents (text or otherwise) typed out or prepared on typewriters and computers and can be extended to digital photographs and videos, and online surveys too. In other words, any manuscript prepared and submitted online can be considered to be an electronic submission. == History and early usage == There is no concrete data indicating when and by whom were electronic submissions used for the first time. However, research based universities in several countries have been encouraging the collection of course assignments and projects in the form of electronic submissions for almost a decade now. Several governments and organizations are also switching to electronic submissions for the collection of research papers, grant applications and government application forms. == Types of electronic submissions == Since modern computers can store and process information and data in virtually any format and with the Internet allowing easy transfer of this data, the number of scenarios in which submissions can be collected electronically has increased exponentially in the last few years. Some of these scenarios are described below. In most of these scenarios, submissions were collected on hard paper until the Information Technology revolution occurred. === Academic Submissions === Teachers, professors and teaching assistants often collect course assignments and projects electronically. Electronic submissions are usually collected using a web-based system which more often than not also helps in the management of submissions collected and stored on it. (Explained By Henny L, University of Lethbridge, AB, Canada) === Research Papers === In call-for-paper or academic conferences, prospective presenters are usually asked to submit a short abstract or a full paper on their presentation or research work electronically, which is reviewed before being accepted for the conference. === Proposals for Grants === Several grant-giving organizations like the NSA, W3C, NIA, NIH etc. require grant seekers to submit a proposal which if accepted result in the desired grants. A majority of these proposals are now submitted electronically on systems that also help in the managing and tracking the proposals submitted. === Articles for Publication === Magazines, newspapers and other publishing houses have begun accepting electronic submissions for articles from various sources - both internal (by journalists and writers hired by them) as well as external (by users and popular readers). The submitted articles are stored on a server hosted by the publication house or by a third-party Archived 2019-10-13 at the Wayback Machine vendor and are usually evaluated before being given a green signal. === Contests and Competition Entries === Almost every kind of contest or competition requires participants to submit an entry in a format described by the organizers of the contest. If the contest is an Internet-based one, then the entries or nominations for the contest are collected electronically using e-mail or other electronic means depending on feasibility and the choice of the organizers. === Government Applications === The governments of several countries are turning to electronic submission of applications and forms for various government procedures. Electronic submissions allow easier management of the applications and forms submitted. === Legal documents === Many legal documents may be submitted to the courts electronically. In England and Wales, the Civil Procedure Rules include a suitable "document exchange" as an acceptable "method of service". Case law in employment law cases has established that where a claim is submitted electronically, a prudent legal adviser should "check that it has been received and there must be systems in place for doing that". === Resumés and CVs === It has become commonplace for job-seekers to submit soft copies (electronic versions) of their resumés and CVs to recruiting agencies and online job portals. This is usually done over the Internet using e-mail or a pre-hosted web-based system. == Submission management systems == The art and science of collecting and managing electronic submissions is called Submission Management. Certain software vendors have begun developing submission management systems to assist in the collection, tracking and management of complex submission processes realized electronically. Most of these systems are web based and accessible from any device with a browser and an Internet connection. However, a majority of these systems are application specific and cannot be applied to all submission management scenarios. == Resistance to electronic submissions == Despite the easier management and tracking of electronic submissions compared to their paper-based counterparts, widespread adoption and use of electronic submissions and systems for managing them has been hampered by several facts, which include but are not limited to: Inconvenience while drawing figures, diagrams and equations on a computer Resistance to change and adoption of new technologies Lack of or limited access to the Internet.

    Read more →
  • Digital journalism

    Digital journalism

    Digital journalism, also known as netizen journalism or online journalism, is a contemporary form of journalism where editorial content is distributed via the Internet, as opposed to publishing via print or broadcast. What constitutes digital journalism is debated amongst scholars. However, the primary product of journalism, which is news and features on current affairs, is presented solely or in combination as text, audio, video, or some interactive forms like storytelling stories or newsgames and disseminated through digital media technology. Fewer barriers to entry, lowered distribution costs and diverse computer networking technologies have led to the widespread practice of digital journalism. It has democratized the flow of information that was previously controlled by traditional media including newspapers, magazines, radio and television. Most readers expect online journalists to be reliable and competent, but these journalists often fail to meet this standard because they have very short deadlines and do not have enough resources to produce decent work. Some have asserted that a greater degree of creativity can be exercised with digital journalism when compared to traditional journalism and traditional media. The digital aspect may be central to the journalistic message and remains, to some extent, within the creative control of the writer, editor and/or publisher. It has been acknowledged that reports of its growth have tended to be exaggerated. In fact, a 2019 Pew survey showed a 16% decline in the time spent on online news sites since 2016. In the United States, reports issued by the Federal Communications Commission (FCC) in 2011 and by the Government Accountability Office (GAO) and the Congressional Research Service (CRS) in 2023 found that increases in newsroom staffing at digital-native news websites from 2008 to 2020 were not offsetting cuts in newsroom staffing among newspapers (which numbered in the tens of thousands of jobs), and that newspapers and television (which had been seeing declining newsroom staffing alongside newspapers) still employed the majority of payrolled newsroom staff in the United States in 2022 while online-only news websites employed less than 10%. The GAO and CRS reports noted further that the reduction in subscription and advertising revenue for the U.S. newspaper industry from 2000 to 2020 that constituted the overwhelming majority of its inflation-adjusted total revenue was not being offset by digital circulation or online advertising despite almost two-thirds of U.S. advertising spending in total by 2020 being online. Also, while the FCC report noted that local television stations in the United States had become some of the largest providers of local news online, the FCC found in a 2021 working paper that inflation-adjusted advertising revenue for television stations fell nationally from 2010 to 2018. == Overview == Digital journalism flows as journalism flows and is difficult to pinpoint where it is and where it is going. In partnership with digital media, digital journalism uses facets of digital media to perform journalist tasks, for example, using the internet as a tool rather than a singular form of digital media. There is no absolute agreement as to what constitutes digital journalism. Mu Lin argues that, "Web and mobile platforms demand us to adopt a platform-free mindset for an all-inclusive production approach – create the [digital] contents first, then distribute via appropriate platforms." The repurposing of print content for an online audience is sufficient for some, while others require content created with the digital medium's unique features like hypertextuality. Fondevila Gascón adds multimedia and interactivity to complete the digital journalism essence. For Deuze, online journalism can be functionally differentiated from other kinds of journalism by its technological component which journalists have to consider when creating or displaying content. Digital journalistic work may range from purely editorial content like CNN (produced by professional journalists) online to public-connectivity websites like Slashdot (communication lacking formal barriers of entry). The difference of digital journalism from traditional journalism may be in its re-conceptualised role of the reporter in relation to audiences and news organizations. The expectations of society for instant information was important for the evolution of digital journalism. However, it is likely that the exact nature and roles of digital journalism will not be fully known for some time. Some researchers even argue that the free distribution of online content, online advertisement and the new way recipients use news could undermine the traditional business model of mass media distributors that is based on single-copy sales, subscriptions and the selling of advertisement space. == History == The first type of digital journalism, called teletext, was invented in the UK in 1970. Teletext is a system allowing viewers to choose which stories they wish to read and see it immediately. The information provided through teletext is brief and instant, similar to the information seen in digital journalism today. The information was broadcast between the frames of a television signal in what was called the vertical blanking interval or VBI. American journalist Hunter S. Thompson relied on early digital communication technology beginning by using a fax machine to report from the 1971 US presidential campaign trail as documented in his book Fear and Loathing on the Campaign Trail. After the invention of teletext was the invention of videotex, of which Prestel was the world's first system, launching commercially in 1979 with various British newspapers, such as the Financial Times lining up to deliver newspaper stories online through it. Videotex closed down in 1986 due to failing to meet end-user demand. American newspaper companies took notice of the new technology and created their own videotex systems, the largest and most ambitious being Viewtron, a service of Knight-Ridder launched in 1981. Others were Keycom in Chicago and Gateway in Los Angeles. All of them had closed by 1986. Next came computer Bulletin Board Systems. In the late 1980s and early 1990s, several smaller newspapers started online news services using BBS software and telephone modems. The first of these was the Albuquerque Tribune in 1989. Computer Gaming World in September 1992 broke the news of Electronic Arts' acquisition of Origin Systems on Prodigy, before its next issue went to press. Online news websites began to proliferate in the 1990s. An early adopter was The News & Observer in Raleigh, North Carolina which offered online news as Nando. Steve Yelvington wrote on the Poynter Institute website about Nando, owned by The N&O, by saying "Nando evolved into the first serious, professional news site on the World Wide Web". It originated in the early 1990s as "NandO Land". It is believed that a major increase in digital online journalism occurred around this time when the first commercial web browsers, Netscape Navigator (1994) and Internet Explorer (1995). By 1996, most news outlets had an online presence. Although journalistic content was repurposed from original text/video/audio sources without change in substance, it could be consumed in different ways because of its online form through toolbars, topically grouped content, and intertextual links. A twenty-four-hour news cycle and new ways of user-journalist interaction web boards were among the features unique to the digital format. Later, portals such as AOL and Yahoo! and their news aggregators (sites that collect and categorize links from news sources) led to news agencies such as The Associated Press to supplying digitally suited content for aggregation beyond the limit of what client news providers could use in the past. Also, Salon, was founded in 1995. In 2001, the American Journalism Review called Salon the Internet's "preeminent independent venue for journalism." In 2008, for the first time, more Americans reported getting their national and international news from the internet, rather than newspapers. Young people aged 18 to 29 now primarily get their news via the Internet, according to a Pew Research Center report. Audiences to news sites continued to grow due to the launch of new news sites, continued investment in news online by conventional news organizations, and the continued growth in internet audiences overall. Sixty-five percent of youth now primarily access the news online. Mainstream news sites are the most widespread form of online news media production. As of 2000, the vast majority of journalists in the Western world now use the internet regularly in their daily work. In addition to mainstream news sites, digital journalism is found in index and category sites (sites without much original content but multiple links to existing news sites), meta- and comment sites (sites about

    Read more →
  • Death and the Internet

    Death and the Internet

    A recent extension to the cultural relationship with death is the increasing number of people who die having created a large amount of digital content, such as social media profiles, that will remain after death. This may result in concern and confusion, because of automated features of dormant accounts (e.g. birthday reminders), uncertainty of the deceased's preferences that profiles be deleted or left as a memorial, and whether information that may violate the deceased's privacy (such as email or browser history) should be made accessible to family. Issues with how this information is sensitively dealt with are further complicated as it may belong to the service provider (not the deceased) and many do not have clear policies on what happens to the accounts of deceased users. While some sites, including Facebook and X (formerly Twitter), have policies related to death, others remain dormant until if applicable, deleted due to inactivity or transferred to family or friends. The FADA (Fiduciary Access to Digital Assets Act) was set in place to make it possible to transfer digital possessions legally. More broadly, the heavy increase in social media use is affecting cultural practices surrounding death. "Virtual funerals" and other forms of previously physical memorabilia are being introduced into the digital world, complete with public details of a person's life and death. == E-mail == Gmail and Hotmail allow the email accounts of the deceased to be accessed provided certain requirements are met. Yahoo! Mail will not provide access, citing the No Right of Survivorship and Non-Transferability clause in the Yahoo! terms of service. In 2005, Yahoo! was ordered by the Probate Court of Oakland County, Michigan, to release emails of deceased US Marine Justin Ellsworth to his father, John Ellsworth. == By website == === Facebook === ==== Policies ==== In its early days, Facebook used to delete profiles of dead people, but does not anymore. In October 2009, the company introduced "memorial pages" in response to multiple user requests related to the 2007 Virginia Tech shooting. After receiving a proof of death via a special form, the profile would be converted into a tribute page with minimal personal details, where friends and family members could share their grief. In February 2015, Facebook allowed users to appoint a friend or family member as a "legacy contact" with the rights to manage their page after death. It also gave Facebook users an option to have their account permanently deleted when they die. As of January 2019, all 3 options were active. ==== Controversies ==== In 2013, BuzzFeed criticized Facebook for the lack of control over memorialization that resulted in a "Facebook death" prank aimed at locking users out of their own accounts. In 2017, Reuters reported that a German court rejected a mother's demand to access her deceased daughter's memorialized account stating that the right to private telecommunications outweighed the right to inheritance. In July 2018, Dubai's DIFC Courts ruling clarified that Facebook, Twitter and other social media accounts should be bequeathed in legally binding will. Social media networks have also been criticized for not responding to relatives' requests to alter information on memorialized accounts. Another criticism is that Facebook users often are unaware that their content is ultimately owned not by them, but by Facebook. === Dropbox === ==== Policies ==== Dropbox determines inactive accounts by looking at sign-ins, file shares, and file activity over the previous 12 months. Once an account is determined inactive, Dropbox deletes the files on the account. To request access to the account of a deceased person, heirs are required to send appropriate documents by physical mail. === Google === ==== Policies ==== In April 2013, Google announced the creation of the 'Inactive Account Manager', which allows users of Google services to set up a process in which ownership and control of inactive accounts is transferred to a delegated user. Google also allows users to submit a range of requests regarding accounts belonging to deceased users. Google works with immediate family members and representatives to close online accounts in some cases once a user is known to be deceased, and in certain circumstances may also provide content from a deceased user's account. === X (formerly Twitter) === ==== Policies ==== Until 2010, Twitter (launched in July 2006) did not have a policy on handling deceased user accounts, and simply deleted timelines of deceased users. In August 2010, Twitter allowed memorialization of accounts upon request from family members, and also provided them with an option of either deleting the account or obtaining a permanent backup of the deceased user's public tweets. In 2014, Twitter updated its policy to include an option to delete deceased user photographs. This policy was implemented after multiple Twitter trolls sent Zelda Williams, daughter of Robin Williams, photoshopped images of her father. As of January 2019, the only option that Twitter offered for the accounts of dead people was account deactivation. Previously published content is not removed. To deactivate an account Twitter requires an immediate family member to present a copy of their ID and a death certificate of the deceased. Twitter specified that it does not provide account access to anyone, but does allow people having account login information to continue posting. A prominent example is Roger Ebert's account maintained by his wife Chaz. ==== Controversies ==== In 2012, The Next Web columnist Martin Bryant noticed that since Twitter, unlike Facebook, did not have a "one account per real person" emphasis, memorializing accounts presented a difficulty to the service. He also criticized the service for the lack of control over hacking of such accounts and disapproved the practice of passing dead people's usernames to new owners after a certain period of inactivity. In 2013, Variety ran a feature about Cory Monteith's Twitter account that had 1.5 million followers at the moment on his death and gained almost 1 million new followers afterwards. Monteith's fans also launched #DontDeleteCorysTwitter campaign. As of February 2019, the celebrity's account had 1.63 million followers. Various media reported awkward incidents related to automatic posting and account hacking. === iTunes === ==== Policies ==== iCloud and iTunes accounts are "non transferable" since the content is not owned — users only have a licence to access it. === Wikipedia === Users who have made at least several hundred edits or are otherwise known for substantial contributions to Wikipedia can be noted at a central memorial page. Wikipedia user pages are ordinarily fully edit-protected after the user has died, to prevent vandalism. === YouTube === YouTube grants access to accounts of deceased persons under certain conditions. It is one of the data options that one can select to give access to a trusted contact with Google's Inactive Account Manager. === Instagram === ==== Policies ==== As of the COVID-19 pandemic, Instagram has notified its users of a delay in time of reviewing reports of deceased users due to the limited staff the pandemic has caused. Users that submit a report on a deceased user on Instagram can either memorialize the account or remove it from Instagram's platform. Through memorializing the account, Instagram secures and protects a platform of a deceased user, but per their policy, they do not supply any of the login credentials to the account. For both memorializing or removing a deceased users account, a verified user needs to submit a tangible document that shows proof of death of the user. However, to fully remove an account, the user must be a close or direct family member to the deceased person, and show proof of credibility as well. === Microsoft === ==== Policies ==== Per Microsoft's policies, they do not supply any of the login credentials to a deceased user's Microsoft account. A user does not have to contact or notify Microsoft of the deceased user, as the related user is able to close the account themselves. At default, Microsoft removes accounts after 2 years of inactivity. If the user does not have access to the deceased user's account, Microsoft recommends that the user deletes all bank accounts linked to that of the deceased to ensure no subscriptions are still going through. If the user wants to request to gain access to the deceased user's account, a court order or a subpoena has to be provided to Microsoft, but does not guarantee access to the deceased user's account. For users that live in Germany, more documentation is needed to gain access of a deceased user's account, including the deceased user's death certificate, a form of ID, and a documentation of consent from the deceased. The requesting user needs to provide a form of ID as well. == Digital inheritance == Digital inheritance is the process of handing over

    Read more →
  • 2018 Google data breach

    2018 Google data breach

    The 2018 Google data breach was a major data privacy scandal in which the Google+ API exposed the private data of over five hundred thousand users. Google+ managers first noticed harvesting of personal data in March 2018, during a review following the Facebook–Cambridge Analytica data scandal. The bug, despite having been fixed immediately, exposed the private data of approximately 500,000 Google+ users to the public. Google did not reveal the leak to the network's users. In November 2018, another data breach occurred following an update to the Google+ API. Although Google found no evidence of failure, approximately 52.5 million personal profiles were potentially exposed. In August 2019, Google declared a shutdown of Google+ due to low use and technological challenges. == Overview of Google+ == Google+ was launched in June 2011 as an invite-only social network, but was opened for public access later in the year. It was managed by Vic Gundotra. Similar to Facebook, Google+ also included key features Circles, Hangouts and Sparks. Circles let users personalize their social groups by sorting friends into different categories. Once allowed into a Circle, users could regulate information in their individual spaces. Hangouts included video chatting and instant messaging between users. Sparks allowed Google to track users' past searches to find news and content related to their interests. Google+ was linked to other Google services, such as YouTube, Google Drive and Gmail, giving it access to roughly 2 billion user accounts. However, less than 400 million consumers actively used Google+, with 90% of those users using it for less than five seconds. == The breaches == In March 2018, Google developers found a data breach within the Google+ People API in which external apps acquired access to Profile fields that were not marked as public. According to The Wall Street Journal, Google didn’t disclose the breach when it was first discovered in March to avoid regulatory scrutiny and reputational damage. 500,000 Google+ accounts were included in the breach, which allowed 438 external apps unauthorized access to private users' names, emails, addresses, occupations, genders and ages. This information was available between 2015 and 2018. Google found no evidence of any user's personal information being misused, nor that any third-party app developers were aware of the leak. In November 2018, a software update created another data breach within the Google+ API. The bug impacted 52.5 million users, where, similarly to the March breach, unauthorized apps were able to access Google+ profiles, including users' names, email addresses, occupations and ages. Apps could not access financial information, national identification, numbers, or passwords. Blog posts, messages and phone numbers also remained inaccessible if marked as private. Unlike the previous breach, access was only available for six days before Google+ learned of the breach. Once more, Google+ found no evidence of data being misused by third-party developers. == Responses == In October 2018, the Wall Street Journal published an article outlining the initial breach and Google's decision to not disclose it to users. At the time, there was no federal law that required Google to inform their consumers of data breaches. Google+ originally did not disclose the breach out of fears of being compared to Facebook's recent data leak and subsequent loss of consumer confidence. In response to the Wall Street Journal article, Google announced the shutdown of Google+ in August 2019. After the second data leak, the date was moved to April 2019. In response to the data breach, enterprise consumers were notified of the bug's impact and given instructions on how to save, download and delete their data prior to the Google+ shut down. Google's Privacy and Data Protection Office found no misuse of user data. Prior to the Google+ shutdown, Google set a 10-month period in which users could download and migrate their data. After the 10-month period, user content was deleted. On 4 February 2019, consumers were no longer able to create new Google+ profiles. Google shut down Google+ APIs on 7 March 2019 to ensure that developers did not continue to rely on the APIs prior to the Google+ shutdown. Google is the principal entity of its parent company, Alphabet Inc. After the data breach, Alphabet Inc. share prices fell by 1% to $1,157.06 on 9 October 2018 after an earlier drop of $1,135.40 that morning, the lowest price since 5 July 2018. After the publication of The Wall Street Journal article, share prices dropped as low as 2.1% in two days on 10 October 2018. Share prices steadily increased from this point and met the 8 October 2018 share price on 5 February 2019. Google planned to rebuild Google+ as a corporate enterprise network. Google Play will now assess which apps can ask for permission to access the user's SMS data. Only the default app for telephone distribution is able to make requests. Prior to the data breaches, apps were able to request access to all of a consumer's data simultaneously. Now, each app must request permission for each aspect of a consumer's profile.

    Read more →
  • Awwwards

    Awwwards

    Awwwards (Awwwards Online SL) is an organization that hosts web design competitions and conferences across Europe and the United States. Website owners and developers can participate by submitting their websites for review. Submissions are assessed by a jury, and top entries are presented and awarded prizes on a rotational basis. == Nomination process == Web designers submit their websites through Awwwards' platform for consideration for the Site of the Day. A jury, composed of industry professionals, and the Awwwards community evaluate the entries. The best daily sites are published annually in "The 365 Best Websites Around the World" book. == Jury == The jury consists of international designers, developers, and agencies who assess the creativity, technical skills, and insight of the submitted web projects. The panel's expertise ensures a comprehensive review process. === Developer Award === Awwwards, in partnership with Microsoft, created the Developer Award to recognize web developers who demonstrate excellence in creating websites that meet modern standards. The award highlights websites that work seamlessly across various platforms and devices, using best practices in HTML5, JavaScript, and CSS. == Annual winners == Some prominent Site of the Year winners include Mercedes-Benz, Bloomberg L.P., Bose Corporation, Warner Brothers, Volkswagen, Uber, and Google. == Awwwards conference == Awwwards also organizes two-day conferences featuring speakers from major tech companies and industry leaders such as Microsoft, Google, Spotify, Adobe, Opera, and Smashing Magazine. These events focus on the latest trends in web design and development. Speakers at Awwwards conferences have included notable figures in the design and technology industry such as Stefan Sagmeister, Paula Scher, and design leaders from companies including Wix. == Corporate affairs == === Platform === Awwwards operates an online platform where web designers and developers submit websites for evaluation and awards. Submitted projects are reviewed by a jury based on design, usability, creativity, and content. The platform also serves as a community hub for discovering digital trends, showcasing work, and accessing educational resources including talks and interviews. Design professionals from international companies have participated in Awwwards events and platform content. For example, Wix, a cloud-based web development company known for its website builder tools, has featured prominently in Awwwards conferences, with its design leadership contributing to discussions on design trends and creative thinking.

    Read more →
  • Digital first

    Digital first

    Digital first is a communication theory that publishers should release content into new media channels in preference to old media. The premise behind the theory is that after the advent of Internet, most established media organizations continued to give priority to traditional media. Over time, those organizations faced a choice to either publish first in digital media or traditional media. A "digital first" decision occurs when a publisher chooses to distribute information online in preference to or at the expense of traditional media like print publishing. Many employers and employees find it challenging to imagine using digital first practices. Distributing content digital first introduces new practices, including a need to manage the data which tracks readership. Many paper print publishers feel intimidated by the idea of publishing content online before publishing it in paper media. Comedian John Oliver in the show Last Week Tonight criticized digital first practices as a cause of lower standards in journalism. == Digital-First Transformation in Business and Education == The classical perspective of an information system is that it represents and reflects physical reality. However, it is increasingly evident that digital technologies not only represent reality but also actively shape it, as, in many instances, the digital version is created first, and the physical version follows. Gradually, digital infrastructures are integrated in people's work and life, shaping a digital environment through technologies such as 5G, sensors, and blockchain. The Digital First Framework, developed by Professor Youngjin Yoo, is a conceptual approach that helps the physical companies in the integration of digital technologies into the core of product and service design. The shift from traditional cars, where the physical vehicle precedes its digital representation on Google maps, to autonomous vehicles, where the digital representation (the blue dot) is created first, emphasizes the digital-first mindset in the design and operation of systems. In today's business environment, it's critical for organizations to embrace a digital-first strategy. Companies built on digital platforms will significantly diverge from traditional, hierarchical business structures that typically focus on a single product or market. These digitally-centered enterprises will offer products and services that are tailored to individual requirements, utilizing algorithms to assess needs based on specific situations, and relying on external partners to provide these solutions. This highlights the need to transform traditional R&D practices. It's essential for R&D teams to move beyond their laboratories and immerse themselves in the environments of their users. Understanding the context of use is fundamental to creating a relevant platform. As an illustration, the concept of Digital-first, as defined by Rohm et al. (2019), involves the integration of digital projects within educational courses, exemplified by institutions like M-School. The program adopts a programmatic approach, where successive courses progressively build upon one another, adopting an all-encompassing perspective that regards all aspects of marketing as inherently digital. Students actively participate in real-world projects, including campaigns for community improvement, and are tasked with generating content for diverse platforms. Through hands-on collaboration with live clients and the utilization of tools such as Google AdWords and Facebook Advertising, students acquire practical experience in the realms of digital marketing and analytics. == vBook == A vBook is an eBook that is digital first media with embedded video, images, graphs, tables, text, and other media.

    Read more →
  • Hardware trojan

    Hardware trojan

    A hardware trojan (HT) is a malicious modification of the circuitry of an integrated circuit. A hardware trojan is completely characterized by its physical representation and its behavior. The payload of an HT is the entire activity that the Trojan executes when it is triggered. In general, trojans try to bypass or disable the security fence of a system: for example, leaking confidential information by radio emission. HTs also could disable, damage or destroy the entire chip or components of it. Hardware trojans may be introduced as hidden front-doors that are inserted while designing a computer chip, by using a pre-made application-specific integrated circuit (ASIC) semiconductor intellectual property core (IP core) that have been purchased from a non-reputable source, or inserted internally by a rogue employee, either acting on their own, or on behalf of rogue special interest groups, or state sponsored spying and espionage. One paper published by IEEE in 2015 explains how a hardware design containing a trojan could leak a cryptographic key leaked over an antenna or network connection, provided that the correct "easter egg" trigger is applied to activate the data leak. In high security governmental IT departments, hardware trojans are a well known problem when buying hardware such as: a KVM switch, keyboards, mice, network cards, or other network equipment. This is especially the case when purchasing such equipment from non-reputable sources that could have placed hardware trojans to leak keyboard passwords, or provide remote unauthorized entry. == Background == In a diverse global economy, outsourcing of production tasks is a common way to lower a product's cost. Embedded hardware devices are not always produced by the firms that design and/or sell them, nor in the same country where they will be used. Outsourced manufacturing can raise doubt about the evidence for the integrity of the manufactured product (i.e., one's certainty that the end-product has no design modifications compared to its original design). Anyone with access to the manufacturing process could, in theory, introduce some change to the final product. For complex products, small changes with large effects can be difficult to detect. The threat of a serious, malicious, design alteration can be especially relevant to government agencies. Resolving doubt about hardware integrity is one way to reduce technology vulnerabilities in the military, finance, energy and political sectors of an economy. Since fabrication of integrated circuits in untrustworthy factories is common, advanced detection techniques have emerged to discover when an adversary has hidden additional components in, or otherwise sabotaged, the circuit's function. == Characterization of hardware trojans == An HT can be characterized by several methods such as by its physical representation, activation phase and its action phase. Alternative methods characterize the HT by trigger, payload and stealth. === Physical characteristics === One of this physical trojan characteristics is the type. The type of a trojan can be either functional or parametric. A trojan is functional if the adversary adds or deletes any transistors or gates to the original chip design. The other kind of trojan, the parametric trojan, modifies the original circuitry, e.g. thinning of wires, weakening of flip-flops or transistors, subjecting the chip to radiation, or using focused ion-beams (FIB) to reduce the reliability of a chip. The size of a trojan is its physical extension or the number of components it is made of. Because a trojan can consist of many components, the designer can distribute the parts of a malicious logic on the chip. The additional logic can occupy the chip wherever it is needed to modify, add, or remove a function. Malicious components can be scattered, called loose distribution, or consist of only few components, called tight distribution, so the area is small where the malicious logic occupies the layout of the chip. In some cases, high-effort adversaries in may regenerate the layout so that the placement of the components of the IC is altered. In rare cases the chip dimension is altered. These changes are structural alterations. === Activation characteristics === The typical trojan is condition-based: It is triggered by sensors, internal logic states, a particular input pattern or an internal counter value. Condition-based trojans are detectable with power traces to some degree when inactive. That is due to the leakage currents generated by the trigger or counter circuit activating the trojan. Hardware trojans can be triggered in different ways. A trojan can be internally activated, which means it monitors one or more signals inside the IC. The malicious circuitry could wait for a count down logic an attacker added to the chip, so that the trojan awakes after a specific time-span. The opposite is externally activated. There can be malicious logic inside a chip, that uses an antenna or other sensors the adversary can reach from outside the chip. For example, a trojan could be inside the control system of a cruising missile. The owner of the missile does not know, that the enemy will be able to switch off the rockets by radio. A trojan which is always-on can be a reduced wire. A chip that is modified in this way produces errors or fails every time the wire is used intensely. Always-on circuits are hard to detect with power trace. In this context combinational trojans and sequential trojans are distinguished. A combinational trojan monitors internal signals until a specific condition happens. A sequential trojan is also an internally activated condition-based circuit, but it monitors the internal signals and searches for sequences not for a specific state or condition like the combinational trojans do. ==== Cryptographic key extraction ==== Extraction of secret keys by means of a hardware trojan without detecting the trojan requires that the trojan uses a random signal or some cryptographic implementation itself. To avoid storing a cryptographic key in the trojan itself and reduction, a physical unclonable function can be used. Physical unclonable functions are small in size and can have an identical layout while the cryptographic properties are different. === Action characteristics === A HT could modify the chip's function or could change the chip's parametric properties (e.g. provokes a process delay). Confidential information can also be transmitted to the adversary (transmission of key information). === Peripheral device hardware trojans === A relatively new threat vector to networks and network endpoints is a HT appearing as a physical peripheral device that is designed to interact with the network endpoint using the approved peripheral device's communication protocol. For example, a USB keyboard that hides all malicious processing cycles from the target network endpoint to which it is attached by communicating with the target network endpoint using unintended USB channels. Once sensitive data is ex-filtrated from the target network endpoint to the HT, the HT can process the data and decide what to do with the data: store the data to memory for later physical retrieval of the HT or possibly ex-filtrate the data to the internet using wireless or using the compromised network endpoint as a pivot. == Potential of threat == A common trojan is passive most of the time-span an altered device is in use. If a trojan is activated the device functionality can be changed, the device can be destroyed or disabled, the device can leak confidential information or the HT may tear down the security and safety of the device. Trojans are stealthy, to avoid detection of the trojan the precondition for activation is a very rare event. Traditional testing techniques are not sufficient. A manufacturing fault happens at a random position while malicious changes are well placed to avoid detection. == Detection == === Physical inspection === First, the molding coat is cut to reveal the circuitry. Then, the engineer repeatedly scans the surface while grinding the layers of the chip. There are several operations to scan the circuitry. Typical visual inspection methods are: scanning optical microscopy (SOM), scanning electron microscopy (SEM), pico-second imaging circuit analysis (PICA), voltage contrast imaging (VCI), light induced voltage alteration (LIVA) or charge induced voltage alteration (CIVA). To compare the floor plan of the chip has to be compared with the image of the actual chip. This is still quite challenging to do. To detect Trojan hardware which include (crypto) keys which are different, an image diff can be taken to reveal the different structure on the chip. The only known hardware Trojan using unique crypto keys but having the same structure is. This property enhances the undetectability of the trojan. === Functional testing === This detection method stimulates the input ports of a chip and monitors the output

    Read more →
  • ELIZA

    ELIZA

    ELIZA is an early natural language processing computer program developed from 1964 to 1967 at MIT by Joseph Weizenbaum. Created to explore communication between humans and machines, ELIZA simulated conversation by using a pattern matching and substitution methodology that gave users an illusion of understanding on the part of the program, but gave no response that could be considered really understanding what was being said by either party. Whereas the ELIZA program itself was written (originally) in MAD-SLIP, the pattern matching directives that contained most of its language capability were provided in separate "scripts", represented in a Lisp-like expression. The most famous script, DOCTOR, simulated a psychotherapist of the Rogerian school (in which the therapist often reflects back the patient's words to the patient), and used rules, dictated in the script, to respond with non-directional questions to user inputs. As such, ELIZA was one of the first chatbots (originally "chatterbots") and one of the first programs capable of attempting the Turing test. Weizenbaum intended the program as a method to explore communication between humans and machines. He was surprised that some people, including his secretary, attributed human-like feelings to the computer program, a phenomenon that came to be called the ELIZA effect. Many academics believed that the program would be able to positively influence the lives of many people, particularly those with psychological issues, and that it could aid doctors working on such patients' treatment. While ELIZA was capable of engaging in discourse, it could not converse with true understanding. However, many early users were convinced of ELIZA's intelligence and understanding, despite Weizenbaum's insistence to the contrary. The original ELIZA source code had been missing since its creation in the 1960s, as it was not common to publish articles that included source code at that time. However, more recently the MAD-SLIP source code was discovered in the MIT archives and published on various platforms, such as the Internet Archive. The source code is of high historical interest since it demonstrates not only the specificity of programming languages and techniques at that time, but also the beginning of software layering and abstraction as a means of achieving sophisticated software programming. == Overview == Joseph Weizenbaum's ELIZA, running the DOCTOR script, created a conversational interaction somewhat similar to what might take place in the office of "a [non-directive] psychotherapist in an initial psychiatric interview" and to "demonstrate that the communication between man and machine was superficial". While ELIZA is best known for acting in the manner of a psychotherapist, the speech patterns are due to the data and instructions supplied by the DOCTOR script. ELIZA itself examined the text for keywords, applied values to said keywords, and transformed the input into an output; the script that ELIZA ran determined the keywords, set the values of keywords, and set the rules of transformation for the output. Weizenbaum chose to make the DOCTOR script in the context of psychotherapy to "sidestep the problem of giving the program a data base of real-world knowledge", allowing it to reflect back the patient's statements to carry the conversation forward. The result was a somewhat intelligent-seeming response that reportedly deceived some early users of the program. Weizenbaum named his program ELIZA after Eliza Doolittle, a working-class character in George Bernard Shaw's Pygmalion (also appearing in the musical My Fair Lady, which was based on the play and was hugely popular at the time). According to Weizenbaum, ELIZA's ability to be "incrementally improved" by various users made it similar to Eliza Doolittle, since Eliza Doolittle was taught to speak with an upper-class accent in Shaw's play. However, unlike the human character in Shaw's play, ELIZA is incapable of learning new patterns of speech or new words through interaction alone. Edits must be made directly to ELIZA's active script in order to change the manner by which the program operates. Weizenbaum first implemented ELIZA in his own SLIP list-processing language, where, depending upon the initial entries by the user, the illusion of human intelligence could appear, or be dispelled through several interchanges. Some of ELIZA's responses were so convincing that Weizenbaum and several others have anecdotes of users becoming emotionally attached to the program, occasionally forgetting that they were conversing with a computer. Weizenbaum's own secretary reportedly asked Weizenbaum to leave the room so that she and ELIZA could have a real conversation. Weizenbaum was surprised by this, later writing: "I had not realized ... that extremely short exposures to a relatively simple computer program could induce powerful delusional thinking in quite normal people." In 1966, interactive computing (via a teletype) was new. It was 11 years before the personal computer became familiar to the general public, and three decades before most people encountered attempts at natural language processing in Internet services like Ask.com or PC help systems such as Microsoft Office Clippit. Although those programs included years of research and work, ELIZA remains a milestone because it was the first time a programmer had attempted such a human-machine interaction with the goal of creating the illusion (however brief) of human–human interaction. At the ICCC 1972, ELIZA was brought together with another early artificial-intelligence program named PARRY for a computer-only conversation. While ELIZA was built to speak as a doctor, PARRY was intended to simulate a patient with schizophrenia. == Design and implementation == Weizenbaum originally wrote ELIZA in MAD-SLIP for CTSS on an IBM 7094 as a program to make natural-language conversation possible with a computer. To accomplish this, Weizenbaum identified five "fundamental technical problems" for ELIZA to overcome: the identification of key words, the discovery of a minimal context, the choice of appropriate transformations, the generation of responses in the absence of key words, and the provision of an editing capability for ELIZA scripts. Weizenbaum solved these problems and made ELIZA such that it had no built-in contextual framework or universe of discourse. However, this required ELIZA to have a script of instructions on how to respond to inputs from users. ELIZA starts its process of responding to an input by a user by first examining the text input for a "keyword". A "keyword" is a word designated as important by the acting ELIZA script, which assigns to each keyword a precedence number, or a RANK, designed by the programmer. If such words are found, they are put into a "keystack", with the keyword of the highest RANK at the top. The input sentence is then manipulated and transformed as the rule associated with the keyword of the highest RANK directs. For example, when the DOCTOR script encounters words such as "alike" or "same", it would output a message pertaining to similarity, in this case "In what way?", as these words had high precedence number. This also demonstrates how certain words, as dictated by the script, can be manipulated regardless of contextual considerations, such as switching first-person pronouns and second-person pronouns and vice versa, as these too had high precedence numbers. Such words with high precedence numbers are deemed superior to conversational patterns and are treated independently of contextual patterns. Following the first examination, the next step of the process is to apply an appropriate transformation rule, which includes two parts: the "decomposition rule" and the "reassembly rule". First, the input is reviewed for syntactical patterns in order to establish the minimal context necessary to respond. Using the keywords and other nearby words from the input, different disassembly rules are tested until an appropriate pattern is found. Using the script's rules, the sentence is then "dismantled" and arranged into sections of the component parts as the "decomposition rule for the highest-ranking keyword" dictates. The example that Weizenbaum gives is the input "You are very helpful", which is transformed to "I are very helpful". This is then broken into (1) empty (2) "I" (3) "are" (4) "very helpful". The decomposition rule has broken the phrase into four small segments that contain both the keywords and the information in the sentence. The decomposition rule then designates a particular reassembly rule, or set of reassembly rules, to follow when reconstructing the sentence. The reassembly rule takes the fragments of the input that the decomposition rule had created, rearranges them, and adds in programmed words to create a response. Using Weizenbaum's example previously stated, such a reassembly rule would take the fragments and apply them to the phrase "What makes

    Read more →
  • Hardware backdoor

    Hardware backdoor

    A hardware backdoor is a backdoor implemented within the physical components of a computer system, also known as its hardware. They can be created by introducing malicious code to a component's firmware, or even during the manufacturing process of an integrated circuit. Often, they are used to undermine security in smartcards and cryptoprocessors, unless investment is made in anti-backdoor design methods. They have also been considered for car hacking. Backdoors differ from hardware Trojans as backdoors are introduced intentionally by the original designer or during the design process, whereas hardware Trojans are inserted later by an external party. == Background == The existence of hardware backdoors poses significant security risks for several reasons. They are difficult to detect and are impossible to remove using conventional methods like antivirus software. They can also bypass other security measures, such as disk encryption. Hardware trojans can be introduced during manufacturing where the end-user lacks control over the production chain. == History == In 2008, the FBI reported the discovery of approximately 3,500 counterfeit Cisco network components in the United States, some of which were introduced in military and government infrastructure. In the same year, the possibility of a backdoor SPARC CPU was demonstrated with an FPGA running Linux that supported various hidden malicious services. A few years later, in 2011, Jonathan Brossard presented "Rakshasa", a proof-of-concept hardware backdoor. This backdoor could be installed by an individual with physical access to the hardware. It utilized coreboot to re-flash the BIOS with a SeaBIOS and iPXE-based bootkit composed of legitimate, open-source tools, allowing malware to be fetched from the internet during the boot process. The following year, in 2012, Sergei Skorobogatov and Christopher Woods from the University of Cambridge Computer Laboratory reported the discovery of a backdoor in a military-grade FPGA device, which could be exploited to access and modify sensitive information. It has been said that this was proven to be a software problem and not a deliberate attempt at sabotage. This still brought to attention that equipment manufacturers should ensure that microchips operate as intended. Later that year, two mobile phones developed by the Chinese company ZTE were found to carry a root access backdoor. According to security researcher Dmitri Alperovitch, the exploit used a hard-coded password in its software. Starting in 2012, the United States stated that Huawei might have backdoors present in their products. In 2013, researchers at the University of Massachusetts devised a method of breaking a CPU's internal cryptographic mechanisms by introducing specific impurities into the crystalline structure of transistors to change Intel's random-number generator. Documents revealed from 2013 onwards during the surveillance disclosures initiated by Edward Snowden showed that the Tailored Access Operations (TAO) unit and other NSA employees intercepted servers, routers, and other network gear being shipped to organizations targeted for surveillance to install covert implant firmware onto them before delivery. These tools include custom BIOS exploits that survive the reinstallation of operating systems and USB cables with spy hardware and radio transceiver packed inside. In June 2016 it was reported that University of Michigan Department of Electrical Engineering and Computer Science had built a hardware backdoor that leveraged "analog circuits to create a hardware attack" so that after the capacitors store up enough electricity to be fully charged, it would be switched on, to give an attacker complete access to whatever system or device − such as a PC − that contains the backdoored chip. In the study that won the "best paper" award at the IEEE Symposium on Privacy and Security they also note that microscopic hardware backdoor wouldn't be caught by practically any modern method of hardware security analysis, and could be planted by a single employee of a chip factory. In October 2018 Bloomberg reported that an attack by Chinese spies reached almost 30 U.S. companies, including Amazon and Apple, by compromising America's technology supply chain. == Countermeasures == Skorobogatov has developed a technique capable of detecting malicious insertions into chips. New York University Tandon School of Engineering researchers have developed a way to corroborate a chip's operation using verifiable computing whereby "manufactured for sale" chips contain an embedded verification module that proves the chip's calculations are correct and an associated external module validates the embedded verification module. Another technique developed by researchers at University College London (UCL) relies on distributing trust between multiple identical chips from disjoint supply chains. Assuming that at least one of those chips remains honest the security of the device is preserved. Researchers at the University of Southern California Ming Hsieh Department of Electrical and Computer Engineering and the Photonic Science Division at the Paul Scherrer Institute have developed a new technique called Ptychographic X-ray laminography. This technique is the only current method that allows for verification of the chips blueprint and design without destroying or cutting the chip. It also does so in significantly less time than other current methods. Anthony F. J. Levi Professor of electrical and computer engineering at University of Southern California explains “It’s the only approach to non-destructive reverse engineering of electronic chips—[and] not just reverse engineering but assurance that chips are manufactured according to design. You can identify the foundry, aspects of the design, who did the design. It’s like a fingerprint.” This method currently is able to scan chips in 3D and zoom in on sections and can accommodate chips up to 12 millimeters by 12 millimeters easily accommodating an Apple A12 chip but not yet able to scan a full Nvidia Volta GPU. "Future versions of the laminography technique could reach a resolution of just 2 nanometers or reduce the time for a low-resolution inspection of that 300-by-300-micrometer segment to less than an hour, the researchers say."

    Read more →
  • Telecommunications device for the deaf

    Telecommunications device for the deaf

    A telecommunications device for the deaf (TDD) is a teleprinter, an electronic device for text communication over a telephone line, that is designed for use by persons with hearing or speech difficulties. Other names for the device include teletypewriter (TTY), textphone (common in Europe), and minicom (United Kingdom). The typical TDD is a device about the size of a typewriter or laptop computer with a QWERTY keyboard and small screen that uses an LED, LCD, or VFD screen to display typed text electronically. In addition, TDDs commonly have a small spool of paper on which text is also printed – old versions of the device had only a printer and no screen. The text is transmitted live, via a telephone line, to a compatible device, i.e. one that uses a similar communication protocol. Special telephone services have been developed to carry the TDD functionality even further. In certain countries, there are systems in place so that a deaf person can communicate with a hearing person on an ordinary voice phone using a human relay operator. There are also "carry-over" services, enabling people who can hear but cannot speak ("hearing carry-over", a.k.a. "HCO"), or people who cannot hear but are able to speak ("voice carry-over", a.k.a. "VCO") to use the telephone. The term TDD is sometimes discouraged because people who are deaf are increasingly using mainstream devices and technologies to carry out most of their communication. The devices described here were developed for use on the partially-analog Public Switched Telephone Network (PSTN). They do not work well on the new internet protocol (IP) networks. Thus as society increasingly moves toward IP based telecommunication, the telecommunication devices used by people who are deaf will not be TDDs. In the US and Canada, the devices are referred to as TTYs. Teletype Corporation, of Skokie, Illinois, made page printers for text, notably for news wire services and telegrams, but these used standards different from those for deaf communication, and although in quite widespread use, were technically incompatible. Furthermore, these were sometimes referred to by the "TTY" initialism, short for "Teletype". When computers had keyboard input mechanisms and page printer output, before CRT terminals came into use, Teletypes were the most widely used devices. They were called "console typewriters". (Telex used similar equipment, but was a separate international communication network.) == History == === APCOM acoustic coupler or MODEM device === The TDD concept was developed by James C. Marsters (1924–2009), a dentist and private airplane pilot who became deaf as an infant because of scarlet fever, and Robert Weitbrecht, a deaf physicist. In 1964, Marsters, Weitbrecht and Andrew Saks, an electrical engineer and grandson of the founder of the Saks Fifth Avenue department store chain, founded APCOM (Applied Communications Corp.), located in the San Francisco Bay area, to develop the acoustic coupler, or modem; their first product was named the PhoneType. APCOM collected old teleprinter machines (TTYs) from the Department of Defense and junkyards. Acoustic couplers were cabled to TTYs enabling the AT&T standard Model 500 telephone to couple, or fit, into the rubber cups on the coupler, thus allowing the device to transmit and receive a unique sequence of tones generated by the different corresponding TTY keys. The entire configuration of teleprinter machine, acoustic coupler, and telephone set became known as the TTY. Weitbrecht invented the acoustic coupler modem in 1964. The actual mechanism for TTY communications was accomplished electro-mechanically through frequency-shift keying (FSK) allowing only half-duplex communication, where only one person at a time can transmit. === Paul Taylor TTY device === During the late 1960s, Paul Taylor combined Western Union Teletype machines with modems to create teletypewriters, known as TTYs. He distributed these early, non-portable devices to the homes of many in the deaf community in St. Louis, Missouri. He worked with others to establish a local telephone wake-up service. In the early 1970s, these small successes in St. Louis evolved into the nation's first local telephone relay system for the deaf. === Micon Industries MCM device === In 1973, the Manual Communications Module (MCM), which was the world's first electronic portable TTY allowing two-way telecommunications, premiered at the California Association of the Deaf convention in Sacramento, California. The battery-powered MCM was invented and designed by a deaf news anchor and interpreter, Kit Patrick Corson, in conjunction with Michael Cannon and physicist Art Ogawa. It was manufactured by Michael Cannon's company, Micon Industries, and initially marketed by Kit Corson's company, Silent Communications. In order to be compatible with the existing TTY network, the MCM was designed around the five-bit Baudot code established by the older TTY machines instead of the ASCII code used by computers. The MCM was an instant success with the deaf community despite the drawback of a $599 cost. Within six months there were more MCMs in use by the deaf and hard of hearing than TTY machines. After a year Micon took over the marketing of the MCM and subsequently concluded a deal with Pacific Bell (who coined the term "TDD") to purchase MCMs and rent them to deaf telephone subscribers for $30 per month. After Micon formed an alliance with APCOM, Michael Cannon (Micon), Paul Conover (Micon), and Andrea Saks (APCOM) successfully petitioned the California Public Utilities Commission (CPUC), resulting in a tariff that paid for TTY devices to be distributed free of cost to deaf persons. Micon produced over 1,000 MCMs per month, resulting in approximately 50,000 MCMs being disseminated into the deaf community. Before he left Micon in 1980, Michael Cannon developed several computer compatible variations of the MCM and a portable, battery operated printing TTY, but they were never as popular as the original MCM. Newer model TTYs could communicate with selectable codes that allow communications at a higher bit rate on those models similarly equipped. However, the lack of true computer interface functionality spelled the demise of the original TTY and its clones. During the mid-1970s, other so-called portable telephone devices were being cloned by other companies, and this was the time period when the term "TDD" began being used largely by those outside the deaf community. === Text messaging and the Def-Tone System (DTS) === This relay system became known commonly as the Def-Tone System (DTS) because the tones representing letters of the alphabet were eventually carried in tones outside the range of human hearing. Today, this is commonly called multi-tap because you press a number 1, 2 or 3 times to get a corresponding letter. In 1994 Joseph Alan Poirier, a college student-worker, recommended using the system to send texts to forklifts to improve delivery of parts to the assembly line at GM Powertrain in Toledo, Ohio, and sending a text to pagers. He recommended taking pagers to alphanumeric displays incorporating the same system in discussions with the pager supplier for Outback Steakhouse and having relays put in the forklifts to ping alert messages to the pagers used in that system. He called it text messaging, coining the phrase. It is theorized that when Toyota forklift was allegedly hired by GM for this work, one of the subcontractors, Kyocera, utilized the work for the Toyota forklift company to create text messaging for cell phones. === Marsters Award === In 2009, AT&T received the James C. Marsters Promotion Award from TDI (formerly Telecommunications for the Deaf, Inc.) for its efforts to increase accessibility to communication for people with disabilities. The award holds some irony; it was AT&T that, in the 1960s, resisted efforts to implement TTY technology, claiming it would damage its communication equipment. In 1968, the Federal Communications Commission struck down AT&T's policy and forced it to offer TTY access to its network. == Protocols == There are many different standards for TDDs and textphones. === Original 5-bit Baudot code === The original standard used by TTYs is a variant of the Baudot code. The maximum speed of this protocol is 10 characters per second. This is a half-duplex protocol, which means that only one person at a time may transmit characters. If both try to transmit at the same time, the characters will be garbled on the other end. This protocol is commonly used in the United States. This is a variant of the Baudot code, implemented as 5-bits per character transmitted asynchronously using frequency-shift key-modulation at either 45.5 or 50 baud, 1 start bit, 5 data bits, and 1.5 stop bits. Details of the protocol implementation are available in TIA-825-A and also in T-REC V.18 Annex A "5-bit operational mode". === Turbo Code === The UltraTec company implements another protocol known as Enh

    Read more →
  • NexDock

    NexDock

    NexDock is a series of lapdock devices (containing a laptop screen, keyboard, trackpad, and battery connected to a phone or other device) sold by Nex Computer LLC. The product can be used with mobile desktop environments, including Samsung DeX and the former Windows Continuum. Critical reception for the series has been mixed, with reviewers praising the concept's utility for mobile productivity while noting hardware limitations and its niche appeal. == History == The first NexDock was introduced in 2016 through a successful Indiegogo campaign. Its development coincided with interest in smartphone-powered desktop interfaces, and it was marketed as a companion for Windows 10 Mobile's Continuum feature. Subsequent models, often launched via Kickstarter, added features like higher-resolution displays, touchscreens, and convertible hinges to adapt to the growing capabilities of smartphones. == Models == === NexDock (Original, 2016) === The first model featured a 14.1-inch 1366x768 display and connected primarily via a mini HDMI port. === NexDock 2 (2019) === This model introduced a 13.3-inch 1080p IPS display and a USB-C port, improvements aimed at better supporting platforms like Samsung DeX. === NexDock Touch (2020) === A touchscreen was added to the 13.3-inch display, allowing for more direct interaction with the connected device's operating system. === NexDock 360 (2021) === This version incorporated a 360-degree hinge, allowing the device to be used in laptop, tablet, tent, or stand modes. === NexDock Wireless (2023) === Wireless display connectivity was the key feature of this model, offering a cable-free connection to compatible phones and computers. === NexDock XL (2023) === The screen size was increased to 15.6 inches. It retained the 360-degree hinge and also offered a version with wireless charging for a connected phone. == Reception == Reviews of NexDock products have been mixed, generally praising the concept while pointing out execution flaws. The devices are often lauded for their utility with Samsung DeX, turning a high-end Samsung phone into a viable portable workstation. A review of the NexDock 2 from ZDNet concluded it was a "great companion for the modern road warrior," and Digital Trends called the original a "no-brainer shell" for expanding a phone's capability. However, reviewers have consistently highlighted hardware limitations. In its review of the NexDock Touch, TechRadar stated that while it was a "compelling package for a very specific niche," the "trackpad and keyboard are a bit of a letdown and the screen could be brighter." This sentiment was echoed in other reviews, with criticism often aimed at the trackpad's performance and feel. A review of the NexDock 2 from Android Authority described the experience as being "janky at times," concluding that the device "delivers on its promise — sort of." A common point across many reviews is that the overall performance is entirely dependent on the power of the connected phone, and the experience is often best suited for light productivity tasks rather than replacing a dedicated laptop.

    Read more →
  • Advanced automation functions

    Advanced automation functions

    In automation production technology the actions performed by an automated process are executed by a program of instructions which is run during a work cycle. To execute work cycle programs, an automated system should be available to execute these advanced functions. == Safety monitoring == If there is a need for workers in an automated system, a safety monitoring is required for the occupational safety and health of the workers. In a safety monitoring various steps can take place including a complete stop of the system, sounding an alarm or reducing the operating speed. Usually, limiting switches are sensors like temperature probes, heat and smoke detectors or pressure sensitive floor pads. == Maintenance and repair diagnostics == There are three modes of operations which are used in a cycle of maintenance and repair diagnostics: status monitoring, failure diagnostics and recommendation of the repair procedure. In the status monitoring mode, the current system status is displayed. The failure diagnostics mode takes place when a failure occurs. The system will then suggest an adequate repair procedure to a team of experts. == Error detection and recovery == The error detection mode is a step to determine if and when a failure occurs in automated system. The possible errors can be divided into three categories. random errors, systematic errors and aberrations. While in the error recovery mode, remedy actions take place for all detected errors.

    Read more →
  • Blocking of Twitter in Nigeria

    Blocking of Twitter in Nigeria

    Twitter was blocked in Nigeria from 5 June 2021 to 13 January 2022. The government imposed a ban on the social network after it deleted tweets made by, and temporarily suspended, the Nigerian president Muhammadu Buhari, warning the southeastern people of Nigeria, predominantly Igbo people, of a potential repeat of the 1967 Nigerian Civil War due to the ongoing insurgency in Southeastern Nigeria. The Nigerian government claimed that the deletion of the president's tweets factored into their decision, but it was ultimately based on "a litany of problems with the social media platform in Nigeria, where misinformation and fake news spread through it have had real world violent consequences", citing the persistent use of the platform for activities that are capable of undermining Nigeria's corporate existence. In January 2022, Nigeria lifted its blocking of Twitter after the platform agreed to establish a legal entity within the country sometime in the first quarter of 2022. == Background == On 1 June 2021, Nigerian President Muhammadu Buhari posted a tweet threatening a crackdown on regional separatists "in the language they understand". The next day, Twitter deleted the tweet, claiming it was in violation of Twitter rules, but gave no further details. Nigeria's Information Minister Lai Mohammed said that Twitter's actions were part of an unfair double standard, as Twitter had not banned incitement tweets from other groups. During the Nigerian Civil War a majority of deaths resulted from the blockade of Biafra which caused the deaths of millions of civilians from starvation, a fact that was not alluded to in the tweet. The Nigerian government has long held concerns over the use of Twitter in the country. The ongoing local End SARS protest began on Twitter and got amplified in 2020 when it had 48 million tweets in ten days. Buhari's government floated the idea of social media regulation on different occasions prior to banning Twitter. Attempts to pass an anti-social media bill in the past have failed majorly due to massive outcry on Twitter. Days before the ban, the country's minister of information called Twitter's activities in Nigeria suspicious, citing its influence on the End SARS protests. == Aftermath == Three days after Twitter was suspended, it was reported that the move had cost the country over 6 billion naira and would also contribute to the worsening unemployment in the country. ExpressVPN reported an over 200 percent increase in web traffic and searches for VPN spiked across the country. In response, Nigeria's Minister of Justice and Attorney General of the Federation Abubakar Malami at first openly threatened to prosecute citizens who bypass the ban using a VPN but then denied saying so after a screenshot of a Twitter deactivation notification he shared on Facebook showed a VPN logo. Nigeria's cultural minister Lai Mohammed stated the ban would be lifted once Twitter submitted to locally licensing, registration and conditions. "It will be licensed by the broadcasting commission, and must agree not to allow its platform to be used by those who are promoting activities that are inimical to the corporate existence of Nigeria." In late June 2021, Twitter announced it would enter talks with the Nigerian government over the platform's suspension. The talks began in July 2021. On 15 September 2021, Mohammed said the Nigerian government will lift the ban on Twitter in a "few days." The Minister said Twitter gave a progress report of their talks with them, adding that it has been productive and quite respectful. On 1 October 2021, President Muhammadu Buhari in his Independence Day broadcast said Twitter must meet the Nigerian government's five conditions before the suspension of the social media platform will be lifted. The conditions are: Respect for national security and cohesion; registration, physical presence and representation in Nigeria; fair taxation; dispute resolution; local content. == Reactions == The ban was condemned by Amnesty International, the British, Canadian and Swedish diplomatic missions to Nigeria, as well as the United States and the European Union in a joint statement. Two domestic organizations, the Socio-Economic Rights and Accountability Project (SERAP) and the Nigerian Bar Association, indicated intent to challenge the ban in court. Twitter itself called the ban "deeply concerning". Former U.S. President Donald Trump, who was permanently suspended from Twitter following the United States Capitol attack in January, praised the ban, stating "Congratulations to the country of Nigeria, who just banned Twitter because they banned their President", and also called on other countries to ban Twitter and Facebook due to "not allowing free and open speech." == Lifting of the ban == On 12 January 2022, the Nigerian Government lifted the ban after Twitter agreed to pay an "applicable tax" and establish "a legal entity in Nigeria during the first quarter of 2022".

    Read more →
  • Hardware backdoor

    Hardware backdoor

    A hardware backdoor is a backdoor implemented within the physical components of a computer system, also known as its hardware. They can be created by introducing malicious code to a component's firmware, or even during the manufacturing process of an integrated circuit. Often, they are used to undermine security in smartcards and cryptoprocessors, unless investment is made in anti-backdoor design methods. They have also been considered for car hacking. Backdoors differ from hardware Trojans as backdoors are introduced intentionally by the original designer or during the design process, whereas hardware Trojans are inserted later by an external party. == Background == The existence of hardware backdoors poses significant security risks for several reasons. They are difficult to detect and are impossible to remove using conventional methods like antivirus software. They can also bypass other security measures, such as disk encryption. Hardware trojans can be introduced during manufacturing where the end-user lacks control over the production chain. == History == In 2008, the FBI reported the discovery of approximately 3,500 counterfeit Cisco network components in the United States, some of which were introduced in military and government infrastructure. In the same year, the possibility of a backdoor SPARC CPU was demonstrated with an FPGA running Linux that supported various hidden malicious services. A few years later, in 2011, Jonathan Brossard presented "Rakshasa", a proof-of-concept hardware backdoor. This backdoor could be installed by an individual with physical access to the hardware. It utilized coreboot to re-flash the BIOS with a SeaBIOS and iPXE-based bootkit composed of legitimate, open-source tools, allowing malware to be fetched from the internet during the boot process. The following year, in 2012, Sergei Skorobogatov and Christopher Woods from the University of Cambridge Computer Laboratory reported the discovery of a backdoor in a military-grade FPGA device, which could be exploited to access and modify sensitive information. It has been said that this was proven to be a software problem and not a deliberate attempt at sabotage. This still brought to attention that equipment manufacturers should ensure that microchips operate as intended. Later that year, two mobile phones developed by the Chinese company ZTE were found to carry a root access backdoor. According to security researcher Dmitri Alperovitch, the exploit used a hard-coded password in its software. Starting in 2012, the United States stated that Huawei might have backdoors present in their products. In 2013, researchers at the University of Massachusetts devised a method of breaking a CPU's internal cryptographic mechanisms by introducing specific impurities into the crystalline structure of transistors to change Intel's random-number generator. Documents revealed from 2013 onwards during the surveillance disclosures initiated by Edward Snowden showed that the Tailored Access Operations (TAO) unit and other NSA employees intercepted servers, routers, and other network gear being shipped to organizations targeted for surveillance to install covert implant firmware onto them before delivery. These tools include custom BIOS exploits that survive the reinstallation of operating systems and USB cables with spy hardware and radio transceiver packed inside. In June 2016 it was reported that University of Michigan Department of Electrical Engineering and Computer Science had built a hardware backdoor that leveraged "analog circuits to create a hardware attack" so that after the capacitors store up enough electricity to be fully charged, it would be switched on, to give an attacker complete access to whatever system or device − such as a PC − that contains the backdoored chip. In the study that won the "best paper" award at the IEEE Symposium on Privacy and Security they also note that microscopic hardware backdoor wouldn't be caught by practically any modern method of hardware security analysis, and could be planted by a single employee of a chip factory. In October 2018 Bloomberg reported that an attack by Chinese spies reached almost 30 U.S. companies, including Amazon and Apple, by compromising America's technology supply chain. == Countermeasures == Skorobogatov has developed a technique capable of detecting malicious insertions into chips. New York University Tandon School of Engineering researchers have developed a way to corroborate a chip's operation using verifiable computing whereby "manufactured for sale" chips contain an embedded verification module that proves the chip's calculations are correct and an associated external module validates the embedded verification module. Another technique developed by researchers at University College London (UCL) relies on distributing trust between multiple identical chips from disjoint supply chains. Assuming that at least one of those chips remains honest the security of the device is preserved. Researchers at the University of Southern California Ming Hsieh Department of Electrical and Computer Engineering and the Photonic Science Division at the Paul Scherrer Institute have developed a new technique called Ptychographic X-ray laminography. This technique is the only current method that allows for verification of the chips blueprint and design without destroying or cutting the chip. It also does so in significantly less time than other current methods. Anthony F. J. Levi Professor of electrical and computer engineering at University of Southern California explains “It’s the only approach to non-destructive reverse engineering of electronic chips—[and] not just reverse engineering but assurance that chips are manufactured according to design. You can identify the foundry, aspects of the design, who did the design. It’s like a fingerprint.” This method currently is able to scan chips in 3D and zoom in on sections and can accommodate chips up to 12 millimeters by 12 millimeters easily accommodating an Apple A12 chip but not yet able to scan a full Nvidia Volta GPU. "Future versions of the laminography technique could reach a resolution of just 2 nanometers or reduce the time for a low-resolution inspection of that 300-by-300-micrometer segment to less than an hour, the researchers say."

    Read more →