AI Content Creator Course Review

AI Content Creator Course Review — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Discrete skeleton evolution

  Discrete Skeleton Evolution (DSE) describes an iterative approach to reducing a morphological or topological skeleton. It is a form of pruning in that it removes noisy or redundant branches (spurs) generated by the skeletonization process, while preserving information-rich "trunk" segments. The value assigned to individual branches varies from algorithm to algorithm, with the general goal being to convey the features of interest of the original contour with a few carefully chosen lines. Usually, clarity for human vision (aka. the ability to "read" some features of the original shape from the skeleton) is valued as well. DSE algorithms are distinguished by complex, recursive decision-making processes with high computational requirements. Pruning methods such as by structuring element (SE) convolution and the Hough transform are general purpose algorithms which quickly pass through an image and eliminate all branches shorter than a given threshold. DSE methods are most applicable when detail retention and contour reconstruction are valued. == Methodology == === Pre-processing === Input images will typical contain more data than is necessary to generate an initial skeleton, and thus must be reduced in some way. Reducing the resolution, converting to grayscale, and then binary by masking or thresholding are common first steps. Noise removal may occur before and/or after converting an image to binary. Morphological operations such as closing, opening, and smoothing of the binary image may also be part of pre-processing. Ideally, the binarized contour should be as noise-free as possible before the skeleton is generated. === Skeletonization === DSE techniques may be applied to an existing skeleton or incorporated as part of the skeleton growing algorithm. Suitable skeletons may be obtained using a variety of methods: Thinning algorithms, such as the Grassfire transform Voronoi diagram Medial Axis Transform or Symmetry Axis Transform Distance Mapping === Significance Measures === DSE and related methods remove entire spurious branches while leaving the main trunk intact. The intended result is typically optimized for visual clarity and retention of information, such that the original contour can be reconstructed from the fully pruned skeleton. The value of various properties must be weighted by the application, and improving the efficiency is an ongoing topic of research in computer vision and image processing. Some significance measures include: Discrete Bisector Function Contour length Bending Potential Ratio Discrete Curve Evolution === Iteration === Each branch is evaluated during a pass through the skeletonized image according to the specific algorithm being used. Low value branches are removed and the process is repeated until a desired threshold of simplicity is reached. === Reconstruction === If all points on the output skeleton are the center points of maximal disks of the image and the radius information is retained, a contour image can be reconstructed == Applications == === Handwriting and text parsing === Variability in hand-written text is an ongoing challenge, simplification makes it somewhat easier for computer vision algorithms to make judgements about intended characters. === Soft body classification (animals) === The maximal disks centered on the skeleton imply roughly spherical masses, the features of the extracted skeleton are relatively unchanged even as the soft body deforms or self-occludes. Skeleton information is one facet of determining whether two animals are the "same" some way, though it must usually be paired with another technique to effectively identify a target. === Medical uses === Investigation of organs, tissue damage and deformation caused by disease.

  Read more →
• 

  Natural Language Toolkit

  The Natural Language Toolkit, or more commonly NLTK, is a suite of libraries and programs for symbolic and statistical natural language processing (NLP) for English written in the Python programming language. It supports classification, tokenization, stemming, tagging, parsing, and semantic reasoning functionalities. It was developed by Steven Bird and Edward Loper in the Department of Computer and Information Science at the University of Pennsylvania. NLTK includes graphical demonstrations and sample data. It is accompanied by a book that explains the underlying concepts behind the language processing tasks supported by the toolkit, plus a cookbook. NLTK is intended to support research and teaching in NLP or closely related areas, including empirical linguistics, cognitive science, artificial intelligence, information retrieval, and machine learning. NLTK has been used successfully as a teaching tool, as an individual study tool, and as a platform for prototyping and building research systems. == Library highlights == Discourse representation Lexical analysis: Word and text tokenizer n-gram and collocations Part-of-speech tagger Tree model and Text chunker for capturing Named-entity recognition

  Read more →
• 

  Stereo cameras

  The stereo cameras approach is a method of distilling a noisy video signal into a coherent data set that a computer can begin to process into actionable symbolic objects, or abstractions. Stereo cameras is one of many approaches used in the broader fields of computer vision and machine vision. == Calculation == In this approach, two cameras with a known physical relationship (i.e. a common field of view the cameras can see, and how far apart their focal points sit in physical space) are correlated via software. By finding mappings of common pixel values, and calculating how far apart these common areas reside in pixel space, a rough depth map can be created. This is very similar to how the human brain uses stereoscopic information from the eyes to gain depth cue information, i.e. how far apart any given object in the scene is from the viewer. The camera attributes must be known, focal length and distance apart etc., and a calibration done. Once this is completed, the systems can be used to sense the distances of objects by triangulation. Finding the same singular physical point in the two left and right images is known as the correspondence problem. Correctly locating the point gives the computer the capability to calculate the distance that the robot or camera is from the object. On the BH2 Lunar Rover the cameras use five steps: a bayer array filter, photometric consistency dense matching algorithm, a Laplace of Gaussian (LoG) edge detection algorithm, a stereo matching algorithm and finally uniqueness constraint. == Uses == This type of stereoscopic image processing technique is used in applications such as 3D reconstruction, robotic control and sensing, crowd dynamics monitoring and off-planet terrestrial rovers; for example, in mobile robot navigation, tracking, gesture recognition, targeting, 3D surface visualization, immersive and interactive gaming. Although the Xbox Kinect sensor is also able to create a depth map of an image, it uses an infrared camera for this purpose, and does not use the dual-camera technique. Other approaches to stereoscopic sensing include time of flight sensors and ultrasound.

  Read more →
• 

  News analytics

  In trading strategy, news analysis refers to the measurement of the various qualitative and quantitative attributes of textual (unstructured data) news stories. Some of these attributes are: sentiment, relevance, and novelty. Expressing news stories as numbers and metadata permits the manipulation of everyday information in a mathematical and statistical way. This data is often used in financial markets as part of a trading strategy or by businesses to judge market sentiment and make better business decisions. News analytics are usually derived through automated text analysis and applied to digital texts using elements from natural language processing and machine learning such as latent semantic analysis, support vector machines, "bag of words" among other techniques. == Applications and strategies == The application of sophisticated linguistic analysis to news and social media has grown from an area of research to mature product solutions since 2007. News analytics and news sentiment calculations are now routinely used by both buy-side and sell-side in alpha generation, trading execution, risk management, and market surveillance and compliance. There is however a good deal of variation in the quality, effectiveness and completeness of currently available solutions. A large number of companies use news analysis to help them make better business decisions. Academic researchers have become interested in news analysis especially with regards to predicting stock price movements, volatility and traded volume. Provided a set of values such as sentiment and relevance as well as the frequency of news arrivals, it is possible to construct news sentiment scores for multiple asset classes such as equities, Forex, fixed income, and commodities. Sentiment scores can be constructed at various horizons to meet the different needs and objectives of high and low frequency trading strategies, whilst characteristics such as direction and volatility of asset returns as well as the traded volume may be addressed more directly via the construction of tailor-made sentiment scores. Scores are generally constructed as a range of values. For instance, values may range between 0 and 100, where values above and below 50 convey positive and negative sentiment, respectively. === Absolute return strategies === The objective of absolute return strategies is absolute (positive) returns regardless of the direction of the financial market. To meet this objective, such strategies typically involve opportunistic long and short positions in selected instruments with zero or limited market exposure. In statistical terms, absolute return strategies should have very low correlation with the market return. Typically, hedge funds tend to employ absolute return strategies. Below, a few examples show how news analysis can be applied in the absolute return strategy space with the purpose to identify alpha opportunities applying a market neutral strategy or based on volatility trading. Example 1 Scenario: The gap between the news sentiment scores for direction, S {\displaystyle S} , of Company X {\displaystyle X} and Market Y {\displaystyle Y} has moved beyond + 20 {\displaystyle +20} . That is, S X − S Y {\displaystyle S_{X}-S_{Y}} ≥ 20 {\displaystyle 20} . Action: Buy the stock on Company X {\displaystyle X} and short the future on Market Y {\displaystyle Y} . Exit Strategy: When the gap in the news sentiment scores for direction of Company X {\displaystyle X} and Market Y {\displaystyle Y} has disappeared, S X − S Y {\displaystyle S_{X}-S_{Y}} = 0 {\displaystyle 0} , sell the stock on Company X {\displaystyle X} and go long the future on Market Y {\displaystyle Y} to close the positions. Example 2 Scenario: The news sentiment score for volatility of Company X {\displaystyle X} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} indicating an expected volatility above the option implied volatility. Action: Buy a short-dated straddle (the purchase of both a put and a call) on the stock of Company X {\displaystyle X} . Exit Strategy: Keep the straddle on Company X {\displaystyle X} until expiry or until a certain profit target has been reached. === Relative return strategies === The objective of relative return strategies is to either replicate (passive management) or outperform (active management) a theoretical passive reference portfolio or benchmark. To meet these objectives such strategies typically involve long positions in selected instruments. In statistical terms, relative return strategies often have high correlation with the market return. Typically, mutual funds tend to employ relative return strategies. Below, a few examples show how news analysis can be applied in the relative return strategy space with the purpose to outperform the market applying a stock picking strategy and by making tactical tilts to ones asset allocation model. Example 1 Scenario: The news sentiment score for direction of Company X {\displaystyle X} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} . Action: Buy the stock on Company X {\displaystyle X} . Exit Strategy: When the news sentiment score for direction of Company X {\displaystyle X} falls below 60 {\displaystyle 60} , sell the stock on Company X {\displaystyle X} to close the position. Example 2 Scenario: The news sentiment score for direction of Sector Z {\displaystyle Z} goes above 70 {\displaystyle 70} out of 100 {\displaystyle 100} . Action: Include Sector Z {\displaystyle Z} as a tactical bet in the asset allocation model. Exit Strategy: When the news sentiment score for direction of Sector Z {\displaystyle Z} falls below 60 {\displaystyle 60} , remove the tactical bet for Sector Z {\displaystyle Z} from the asset allocation model. === Financial risk management === The objective of financial risk management is to create economic value in a firm or to maintain a certain risk profile of an investment portfolio by using financial instruments to manage risk exposures, particularly credit risk and market risk. Other types include Foreign exchange, Shape, Volatility, Sector, Liquidity, Inflation risks, etc. Below, a few examples show how news analysis can be applied in the financial risk management space with the purpose to either arrive at better risk estimates in terms of Value at Risk (VaR) or to manage the risk of a portfolio to meet ones portfolio mandate. Example 1 Scenario: The bank operates a VaR model to manage the overall market risk of its portfolio. Action: Estimate the portfolio covariance matrix taking into account the development of the news sentiment score for volume. Implement the relevant hedges to bring the VaR of the bank in line with the desired levels. Example 2 Scenario: A portfolio manager operates his portfolio towards a certain desired risk profile. Action: Estimate the portfolio covariance matrix taking into account the development of the news sentiment score for volume. Scale the portfolio exposure according to the targeted risk profile. === Computer algorithms using news analytics === Within 0.33 seconds, computer algorithms using news analytics can notify subscribers which company the news is about, if the news article sentiment is positive or negative, if the news is ranked as high or low relative importance … relative relevance. the stock price reaction and the increase in trade volume is concentrated in the first 5 seconds after an news article is released. === Algorithmic order execution === The objective of algorithmic order execution, which is part of the concept of algorithmic trading, is to reduce trading costs by optimizing on the timing of a given order. It is widely used by hedge funds, pension funds, mutual funds, and other institutional traders to divide up large trades into several smaller trades to manage market impact, opportunity cost, and risk more effectively. The example below shows how news analysis can be applied in the algorithmic order execution space with the purpose to arrive at more efficient algorithmic trading systems. Example 1 Scenario: A large order needs to be placed in the market for the stock on Company X {\displaystyle X} . Action: Scale the daily volume distribution for Company X {\displaystyle X} applied in the algorithmic trading system, thus taking into account the news sentiment score for volume. This is followed by the creation of the desired trading distribution forcing greater market participation during the periods of the day when volume is expected to be heaviest. == Effects == Being able to express news stories as numbers permits the manipulation of everyday information in a statistical way that allows computers not only to make decisions once made only by humans, but to do so more efficiently. Since market participants are always looking for an edge, the speed of computer connections and the delivery of news analysis, measured in milliseconds, have become essential.

  Read more →
• 

  Maximum inner-product search

  Maximum inner-product search (MIPS) is a search problem, with a corresponding class of search algorithms which attempt to maximise the inner product between a query and the data items to be retrieved. MIPS algorithms are used in a wide variety of big data applications, including recommendation algorithms and machine learning. Formally, for a database of vectors x i {\displaystyle x_{i}} defined over a set of labels S {\displaystyle S} in an inner product space with an inner product ⟨ ⋅ , ⋅ ⟩ {\displaystyle \langle \cdot ,\cdot \rangle } defined on it, MIPS search can be defined as the problem of determining a r g m a x i ∈ S ⟨ x i , q ⟩ {\displaystyle {\underset {i\in S}{\operatorname {arg\,max} }}\ \langle x_{i},q\rangle } for a given query q {\displaystyle q} . Although there is an obvious linear-time implementation, it is generally too slow to be used on practical problems. However, efficient algorithms exist to speed up MIPS search. Under the assumption of all vectors in the set having constant norm, MIPS can be viewed as equivalent to a nearest neighbor search (NNS) problem in which maximizing the inner product is equivalent to minimizing the corresponding distance metric in the NNS problem. Like other forms of NNS, MIPS algorithms may be approximate or exact. MIPS search is used as part of DeepMind's RETRO algorithm.

  Read more →
• 

  Universal portfolio algorithm

  The universal portfolio algorithm is a portfolio selection algorithm from the field of machine learning and information theory. The algorithm learns adaptively from historical data and maximizes log-optimal growth rate in the long run, per the Kelly criterion. It was introduced by the late Stanford University information theorist Thomas M. Cover. The algorithm rebalances the portfolio at the beginning of each trading period. At the beginning of the first trading period it starts with a naive diversification. In the following trading periods the portfolio composition depends on the historical total return of all possible constant-rebalanced portfolios. The universal portfolio algorithm is the predecessor of the various online portfolio selection methodologies.

  Read more →
• 

  Weight initialization

  In deep learning, weight initialization or parameter initialization describes the initial step in creating a neural network. A neural network contains trainable parameters that are modified during training: weight initialization is the pre-training step of assigning initial values to these parameters. The choice of weight initialization method affects the speed of convergence, the scale of neural activation within the network, the scale of gradient signals during backpropagation, and the quality of the final model. Proper initialization is necessary for avoiding issues such as vanishing and exploding gradients and activation function saturation. Note that even though this article is titled "weight initialization", both weights and biases are used in a neural network as trainable parameters, so this article describes how both of these are initialized. Similarly, trainable parameters in convolutional neural networks (CNNs) are called kernels and biases, and this article also describes these. == Constant initialization == We discuss the main methods of initialization in the context of a multilayer perceptron (MLP). Specific strategies for initializing other network architectures are discussed in later sections. For an MLP, there are only two kinds of trainable parameters, called weights and biases. Each layer l {\displaystyle l} contains a weight matrix W ( l ) ∈ R n l − 1 × n l {\displaystyle W^{(l)}\in \mathbb {R} ^{n_{l-1}\times n_{l}}} and a bias vector b ( l ) ∈ R n l {\displaystyle b^{(l)}\in \mathbb {R} ^{n_{l}}} , where n l {\displaystyle n_{l}} is the number of neurons in that layer. A weight initialization method is an algorithm for setting the initial values for W ( l ) , b ( l ) {\displaystyle W^{(l)},b^{(l)}} for each layer l {\displaystyle l} . The simplest form is zero initialization: W ( l ) = 0 , b ( l ) = 0 {\displaystyle W^{(l)}=0,b^{(l)}=0} Zero initialization is usually used for initializing biases, but it is not used for initializing weights, as it leads to symmetry in the network, causing all neurons to learn the same features. In this page, we assume b = 0 {\displaystyle b=0} unless otherwise stated. Recurrent neural networks typically use activation functions with bounded range, such as sigmoid and tanh, since unbounded activation may cause exploding values. (Le, Jaitly, Hinton, 2015) suggested initializing weights in the recurrent parts of the network to identity and zero bias, similar to the idea of residual connections and LSTM with no forget gate. In most cases, the biases are initialized to zero, though some situations can use a nonzero initialization. For example, in multiplicative units, such as the forget gate of LSTM, the bias can be initialized to 1 to allow good gradient signal through the gate. For neurons with ReLU activation, one can initialize the bias to a small positive value like 0.1, so that the gradient is likely nonzero at initialization, avoiding the dying ReLU problem. == Random initialization == Random initialization means sampling the weights from a normal distribution or a uniform distribution, usually independently. === LeCun initialization === LeCun initialization, popularized in (LeCun et al., 1998), is designed to preserve the variance of neural activations during the forward pass. It samples each entry in W ( l ) {\displaystyle W^{(l)}} independently from a distribution with mean 0 and variance 1 / n l − 1 {\displaystyle 1/n_{l-1}} . For example, if the distribution is a continuous uniform distribution, then the distribution is U ( ± 3 / n l − 1 ) {\displaystyle {\mathcal {U}}(\pm {\sqrt {3/n_{l-1}}})} . === Glorot initialization === Glorot initialization (or Xavier initialization) was proposed by Xavier Glorot and Yoshua Bengio. It was designed as a compromise between two goals: to preserve activation variance during the forward pass and to preserve gradient variance during the backward pass. For uniform initialization, it samples each entry in W ( l ) {\displaystyle W^{(l)}} independently and identically from U ( ± 6 / ( n l + 1 + n l − 1 ) ) {\displaystyle {\mathcal {U}}(\pm {\sqrt {6/(n_{l+1}+n_{l-1})}})} . In the context, n l − 1 {\displaystyle n_{l-1}} is also called the "fan-in", and n l + 1 {\displaystyle n_{l+1}} the "fan-out". When the fan-in and fan-out are equal, then Glorot initialization is the same as LeCun initialization. === He initialization === As Glorot initialization performs poorly for ReLU activation, He initialization (or Kaiming initialization) was proposed by Kaiming He et al. for networks with ReLU activation. It samples each entry in W ( l ) {\displaystyle W^{(l)}} from N ( 0 , 2 / n l − 1 ) {\displaystyle {\mathcal {N}}(0,2/n_{l-1})} . === Orthogonal initialization === (Saxe et al. 2013) proposed orthogonal initialization: initializing weight matrices as uniformly random (according to the Haar measure) semi-orthogonal matrices, multiplied by a factor that depends on the activation function of the layer. It was designed so that if one initializes a deep linear network this way, then its training time until convergence is independent of depth. Sampling a uniformly random semi-orthogonal matrix can be done by initializing X {\displaystyle X} by IID sampling its entries from a standard normal distribution, then calculate ( X X ⊤ ) − 1 / 2 X {\displaystyle \left(XX^{\top }\right)^{-1/2}X} or its transpose, depending on whether X {\displaystyle X} is tall or wide. For CNN kernels with odd widths and heights, orthogonal initialization is done this way: initialize the central point by a semi-orthogonal matrix, and fill the other entries with zero. As an illustration, a kernel K {\displaystyle K} of shape 3 × 3 × c × c ′ {\displaystyle 3\times 3\times c\times c'} is initialized by filling K [ 2 , 2 , : , : ] {\displaystyle K[2,2,:,:]} with the entries of a random semi-orthogonal matrix of shape c × c ′ {\displaystyle c\times c'} , and the other entries with zero. (Balduzzi et al., 2017) used it with stride 1 and zero-padding. This is sometimes called the Orthogonal Delta initialization. Related to this approach, unitary initialization proposes to parameterize the weight matrices to be unitary matrices, with the result that at initialization they are random unitary matrices (and throughout training, they remain unitary). This is found to improve long-sequence modelling in LSTM. Orthogonal initialization has been generalized to layer-sequential unit-variance (LSUV) initialization. It is a data-dependent initialization method, and can be used in convolutional neural networks. It first initializes weights of each convolution or fully connected layer with orthonormal matrices. Then, proceeding from the first to the last layer, it runs a forward pass on a random minibatch, and divides the layer's weights by the standard deviation of its output, so that its output has variance approximately 1. === Fixup initialization === In 2015, the introduction of residual connections allowed very deep neural networks to be trained, much deeper than the ~20 layers of the previous state of the art (such as the VGG-19). Residual connections gave rise to their own weight initialization problems and strategies. These are sometimes called "normalization-free" methods, since using residual connection could stabilize the training of a deep neural network so much that normalizations become unnecessary. Fixup initialization is designed specifically for networks with residual connections and without batch normalization, as follows: Initialize the classification layer and the last layer of each residual branch to 0. Initialize every other layer using a standard method (such as He initialization), and scale only the weight layers inside residual branches by L − 1 2 m − 2 {\displaystyle L^{-{\frac {1}{2m-2}}}} . Add a scalar multiplier (initialized at 1) in every branch and a scalar bias (initialized at 0) before each convolution, linear, and element-wise activation layer. Similarly, T-Fixup initialization is designed for Transformers without layer normalization. === Others === Instead of initializing all weights with random values on the order of O ( 1 / n ) {\displaystyle O(1/{\sqrt {n}})} , sparse initialization initialized only a small subset of the weights with larger random values, and the other weights zero, so that the total variance is still on the order of O ( 1 ) {\displaystyle O(1)} . Random walk initialization was designed for MLP so that during backpropagation, the L2 norm of gradient at each layer performs an unbiased random walk as one moves from the last layer to the first. Looks linear initialization was designed to allow the neural network to behave like a deep linear network at initialization, since W R e L U ( x ) − W R e L U ( − x ) = W x {\displaystyle W\;\mathrm {ReLU} (x)-W\;\mathrm {ReLU} (-x)=Wx} . It initializes a matrix W {\displaystyle W} of shape R n 2 × m {\displaystyle \mathbb {R} ^{{\frac {n}{2}}\times m}} by any method, such as orthogonal initialization, t

  Read more →
• 

  Confusion network

  A confusion network (sometimes called a word confusion network or informally known as a sausage) is a natural language processing method that combines outputs from multiple automatic speech recognition or machine translation systems. Confusion networks are simple linear directed acyclic graphs with the property that each a path from the start node to the end node goes through all the other nodes. The set of words represented by edges between two nodes is called a confusion set. In machine translation, the defining characteristic of confusion networks is that they allow multiple ambiguous inputs, deferring committal translation decisions until later stages of processing. This approach is used in the open source machine translation software Moses and the proprietary translation API in IBM Bluemix Watson.

  Read more →
• 

  Concept mining

  Concept mining is an activity that results in the extraction of concepts from artifacts. Solutions to the task typically involve aspects of artificial intelligence and statistics, such as data mining and text mining. Because artifacts are typically a loosely structured sequence of words and other symbols (rather than concepts), the problem is nontrivial, but it can provide powerful insights into the meaning, provenance and similarity of documents. == Methods == Traditionally, the conversion of words to concepts has been performed using a thesaurus, and for computational techniques the tendency is to do the same. The thesauri used are either specially created for the task, or a pre-existing language model, usually related to Princeton's WordNet. The mappings of words to concepts are often ambiguous. Typically each word in a given language will relate to several possible concepts. Humans use context to disambiguate the various meanings of a given piece of text, where available machine translation systems cannot easily infer context. For the purposes of concept mining, however, these ambiguities tend to be less important than they are with machine translation, for in large documents the ambiguities tend to even out, much as is the case with text mining. There are many techniques for disambiguation that may be used. Examples are linguistic analysis of the text and the use of word and concept association frequency information that may be inferred from large text corpora. Recently, techniques that base on semantic similarity between the possible concepts and the context have appeared and gained interest in the scientific community. == Applications == === Detecting and indexing similar documents in large corpora === One of the spin-offs of calculating document statistics in the concept domain, rather than the word domain, is that concepts form natural tree structures based on hypernymy and meronymy. These structures can be used to generate simple tree membership statistics, that can be used to locate any document in a Euclidean concept space. If the size of a document is also considered as another dimension of this space then an extremely efficient indexing system can be created. This technique is currently in commercial use locating similar legal documents in a 2.5 million document corpus. === Clustering documents by topic === Standard numeric clustering techniques may be used in "concept space" as described above to locate and index documents by the inferred topic. These are numerically far more efficient than their text mining cousins, and tend to behave more intuitively, in that they map better to the similarity measures a human would generate.

  Read more →
• 

  Lexical Markup Framework

  Language resource management – Lexical markup framework (LMF; ISO 24613), produced by ISO/TC 37, is the ISO standard for natural language processing (NLP) and machine-readable dictionary (MRD) lexicons. The scope is standardization of principles and methods relating to language resources in the contexts of multilingual communication. == Objectives == The goals of LMF are to provide a common model for the creation and use of lexical resources, to manage the exchange of data between and among these resources, and to enable the merging of large number of individual electronic resources to form extensive global electronic resources. Types of individual instantiations of LMF can include monolingual, bilingual or multilingual lexical resources. The same specifications are to be used for both small and large lexicons, for both simple and complex lexicons, for both written and spoken lexical representations. The descriptions range from morphology, syntax, computational semantics to computer-assisted translation. The covered languages are not restricted to European languages but cover all natural languages. The range of targeted NLP applications is not restricted. LMF is able to represent most lexicons, including WordNet, EDR and PAROLE lexicons. == History == In the past, lexicon standardization has been studied and developed by a series of projects like GENELEX, EDR, EAGLES, MULTEXT, PAROLE, SIMPLE and ISLE. Then, the ISO/TC 37 National delegations decided to address standards dedicated to NLP and lexicon representation. The work on LMF started in Summer 2003 by a new work item proposal issued by the US delegation. In Fall 2003, the French delegation issued a technical proposition for a data model dedicated to NLP lexicons. In early 2004, the ISO/TC 37 committee decided to form a common ISO project with Nicoletta Calzolari (CNR-ILC Italy) as convenor and Gil Francopoulo (Tagmatica France) and Monte George (ANSI, United States) as editors. The first step in developing LMF was to design an overall framework based on the general features of existing lexicons and to develop a consistent terminology to describe the components of those lexicons. The next step was the actual design of a comprehensive model that best represented all of the lexicons in detail. A large panel of 60 experts contributed a wide range of requirements for LMF that covered many types of NLP lexicons. The editors of LMF worked closely with the panel of experts to identify the best solutions and reach a consensus on the design of LMF. Special attention was paid to the morphology in order to provide powerful mechanisms for handling problems in several languages that were known as difficult to handle. 13 versions have been written, dispatched (to the National nominated experts), commented and discussed during various ISO technical meetings. After five years of work, including numerous face-to-face meetings and e-mail exchanges, the editors arrived at a coherent UML model. In conclusion, LMF should be considered a synthesis of the state of the art in NLP lexicon field. == Current stage == The ISO number is 24613. The LMF specification has been published officially as an International Standard on 17 November 2008. == As one of the members of the ISO/TC 37 family of standards == The ISO/TC 37 standards are currently elaborated as high level specifications and deal with word segmentation (ISO 24614), annotations (ISO 24611 a.k.a. MAF, ISO 24612 a.k.a. LAF, ISO 24615 a.k.a. SynAF, and ISO 24617-1 a.k.a. SemAF/Time), feature structures (ISO 24610), multimedia containers (ISO 24616 a.k.a. MLIF), and lexicons (ISO 24613). These standards are based on low level specifications dedicated to constants, namely data categories (revision of ISO 12620), language codes (ISO 639), scripts codes (ISO 15924), country codes (ISO 3166) and Unicode (ISO 10646). The two level organization forms a coherent family of standards with the following common and simple rules: the high level specification provides structural elements that are adorned by the standardized constants; the low level specifications provide standardized constants as metadata. == Key standards == The linguistics constants like /feminine/ or /transitive/ are not defined within LMF but are recorded in the Data Category Registry (DCR) that is maintained as a global resource by ISO/TC 37 in compliance with ISO/IEC 11179-3:2003. And these constants are used to adorn the high level structural elements. The LMF specification complies with the modeling principles of Unified Modeling Language (UML) as defined by Object Management Group (OMG). The structure is specified by means of UML class diagrams. The examples are presented by means of UML instance (or object) diagrams. An XML DTD is given in an annex of the LMF document. == Model structure == LMF is composed of the following components: The core package that is the structural skeleton which describes the basic hierarchy of information in a lexical entry. Extensions of the core package which are expressed in a framework that describes the reuse of the core components in conjunction with the additional components required for a specific lexical resource. The extensions are specifically dedicated to morphology, MRD, NLP syntax, NLP semantics, NLP multilingual notations, NLP morphological patterns, multiword expression patterns, and constraint expression patterns. == Example == In the following example, the lexical entry is associated with a lemma clergyman and two inflected forms clergyman and clergymen. The language coding is set for the whole lexical resource. The language value is set for the whole lexicon as shown in the following UML instance diagram. The elements Lexical Resource, Global Information, Lexicon, Lexical Entry, Lemma, and Word Form define the structure of the lexicon. They are specified within the LMF document. On the contrary, languageCoding, language, partOfSpeech, commonNoun, writtenForm, grammaticalNumber, singular, plural are data categories that are taken from the Data Category Registry. These marks adorn the structure. The values ISO 639-3, clergyman, clergymen are plain character strings. The value eng is taken from the list of languages as defined by ISO 639-3. With some additional information like dtdVersion and feat, the same data can be expressed by the following XML fragment: This example is rather simple, while LMF can represent much more complex linguistic descriptions the XML tagging is correspondingly complex. == Selected publications about LMF == The first publication about the LMF specification as it has been ratified by ISO (this paper became (in 2015) the 9th most cited paper within the Language Resources and Evaluation conferences from LREC papers): Language Resources and Evaluation LREC-2006/Genoa: Gil Francopoulo, Monte George, Nicoletta Calzolari, Monica Monachini, Nuria Bel, Mandy Pet, Claudia Soria: Lexical Markup Framework (LMF) About semantic representation: Gesellschaft für linguistische Datenverarbeitung GLDV-2007/Tübingen: Gil Francopoulo, Nuria Bel, Monte George Nicoletta Calzolari, Monica Monachini, Mandy Pet, Claudia Soria: Lexical Markup Framework ISO standard for semantic information in NLP lexicons About African languages: Traitement Automatique des langues naturelles, Marseille, 2014: Mouhamadou Khoule, Mouhamad Ndiankho Thiam, El Hadj Mamadou Nguer: Toward the establishment of a LMF-based Wolof language lexicon (Vers la mise en place d'un lexique basé sur LMF pour la langue wolof) [in French] About Asian languages: Lexicography, Journal of ASIALEX, Springer 2014: Lexical Markup Framework: Gil Francopoulo, Chu-Ren Huang: An ISO Standard for Electronic Lexicons and its Implications for Asian Languages DOI 10.1007/s40607-014-0006-z About European languages: COLING 2010: Verena Henrich, Erhard Hinrichs: Standardizing Wordnets in the ISO Standard LMF: Wordnet-LMF for GermaNet EACL 2012: Judith Eckle-Kohler, Iryna Gurevych: Subcat-LMF: Fleshing out a standardized format for subcategorization frame interoperability EACL 2012: Iryna Gurevych, Judith Eckle-Kohler, Silvana Hartmann, Michael Matuschek, Christian M Meyer, Christian Wirth: UBY - A Large-Scale Unified Lexical-Semantic Resource Based on LMF. About Semitic languages: Journal of Natural Language Engineering, Cambridge University Press (to appear in Spring 2015): Aida Khemakhem, Bilel Gargouri, Abdelmajid Ben Hamadou, Gil Francopoulo: ISO Standard Modeling of a large Arabic Dictionary. Proceedings of the seventh Global Wordnet Conference 2014: Nadia B M Karmani, Hsan Soussou, Adel M Alimi: Building a standardized Wordnet in the ISO LMF for aeb language. Proceedings of the workshop: HLT & NLP within Arabic world, LREC 2008: Noureddine Loukil, Kais Haddar, Abdelmajid Ben Hamadou: Towards a syntactic lexicon of Arabic Verbs. Traitement Automatique des Langues Naturelles, Toulouse (in French) 2007: Khemakhem A, Gargouri B, Abdelwahed A, Francopoulo G: Modélisation des paradigmes de fl

  Read more →
• 

  Application-release automation

  Application-release automation (ARA) refers to the process of packaging and deploying an application or update of an application from development, across various environments, and ultimately to production. ARA solutions must combine the capabilities of deployment automation, environment management and modeling, and release coordination. == Relationship with DevOps == ARA tools help cultivate DevOps best practices by providing a combination of automation, environment modeling and workflow-management capabilities. These practices help teams deliver software rapidly, reliably and responsibly. ARA tools achieve a key DevOps goal of implementing continuous delivery with a large quantity of releases quickly. == Relationship with deployment == ARA is more than just software-deployment automation – it deploys applications using structured release-automation techniques that allow for an increase in visibility for the whole team. It combines workload automation and release-management tools as they relate to release packages, as well as movement through different environments within the DevOps pipeline. ARA tools help regulate deployments, how environments are created and deployed, and how and when releases are deployed. == ARA Solutions == All ARA solutions must include capabilities in automation, environment modeling, and release coordination. Additionally, the solution must provide this functionality without reliance on other tools.

  Read more →
• 

  Keith Youngin George II

  Keith "Youngin" George II is a former mixtape DJ, music executive, manager, producer, and technology app director. He has collaborated with Maino, T-Pain, Nas and Soulja Boy, among others. He was instrumental in the launch of social media app and website, Kandiid in 2021 and served as Fliiks App Director of Regional Development. == Career == Keith Anthony George II was born in Upper Heyford, Oxfordshire, England. His father was in the Air Force which exposed him to different cultures and music. He graduated from Allen High School and attended San Antonio College. George's music career began in 2006 as a mixtape DJ working as DJ Youngin Beatz. He performed at various shows and worked with a variety of artists, managers, and music executives. In 2007, George released the mixtape, Untapped market Vol. 1 (Da Underdogz), which featured tracks from artists including Kanye West, Lil Wayne, 50 Cent, Yung Berg, and Nelly. In 2008, he began working with Def Jam executive Sarah Alminawi who was managing Maino at the time. George played a key role in the marketing and promotional success of Maino's single, Hi Hater, which peaked at #8 on Billboard's US Bubbling Under Hot 100 chart. In 2021, George was an advisor and infrastructure head at Kandiid, a social media app which won a W3 Award in 2022. In 2023, he became involved with Fliiks App as Director of Regional Development which earned a Telly Award, two Muse Awards, and a W3 Award in 2025. In 2025, George was a composer and producer on two singles on Sekou Andrews's album, Koumami; The Chosen One: ACT 1 (featuring Lion Babe) and Love Don't Care (featuring Jordin Sparks and Omari Hardwick). In 2025, he was awarded an Atlanta City Proclamation for Philanthropy and Community Leadership for his partnership with Women's International Grail, a nonprofit organization that assists women, single mothers, and low-income families. He also collaborates with local youth programs, creative networks, and minority-owned startups, providing access to mentorship and industry knowledge. == Awards ==

  Read more →
• 

  Bag-of-words model

  The bag-of-words (BoW) model is a model of text which uses an unordered collection (a "bag") of words. It is used in natural language processing and information retrieval (IR). It disregards word order (and thus most of syntax or grammar) but captures multiplicity. The bag-of-words model is commonly used in methods of document classification where, for example, the (frequency of) occurrence of each word is used as a feature for training a classifier. It has also been used for computer vision. An early reference to "bag of words" in a linguistic context can be found in Zellig Harris's 1954 article on Distributional Structure. == Definition == The following models a text document using bag-of-words. Here are two simple text documents: Based on these two text documents, a list is constructed as follows for each document: Representing each bag-of-words as a JSON object, and attributing to the respective JavaScript variable: Each key is the word, and each value is the number of occurrences of that word in the given text document. The order of elements is free, so, for example {"too":1,"Mary":1,"movies":2,"John":1,"watch":1,"likes":2,"to":1} is also equivalent to BoW1. It is also what we expect from a strict JSON object representation. Note: if another document is like a union of these two, its JavaScript representation will be: So, as we see in the bag algebra, the "union" of two documents in the bags-of-words representation is, formally, the disjoint union, summing the multiplicities of each element. === Word order === The BoW representation of a text removes all word ordering. For example, the BoW representation of "man bites dog" and "dog bites man" are the same, so any algorithm that operates with a BoW representation of text must treat them in the same way. Despite this lack of syntax or grammar, BoW representation is fast and may be sufficient for simple tasks that do not require word order. For instance, for document classification, if the words "stocks" "trade" "investors" appears multiple times, then the text is likely a financial report, even though it would be insufficient to distinguish between Yesterday, investors were rallying, but today, they are retreating.andYesterday, investors were retreating, but today, they are rallying.and so the BoW representation would be insufficient to determine the detailed meaning of the document. == Implementations == Implementations of the bag-of-words model might involve using frequencies of words in a document to represent its contents. The frequencies can be "normalized" by the inverse of document frequency, or tf–idf. Additionally, for the specific purpose of classification, supervised alternatives have been developed to account for the class label of a document. Lastly, binary (presence/absence or 1/0) weighting is used in place of frequencies for some problems (e.g., this option is implemented in the WEKA machine learning software system). == Hashing trick == A common alternative to using dictionaries is the hashing trick, where words are mapped directly to indices with a hash function. When using a hash function, no memory is required to store a dictionary. In practice, hashing simplifies the implementation of bag-of-words models and improves scalability. Collisions can occur when two words are hashed to the same index, but this happens infrequently and may function as a form of regularization.

  Read more →
• 

  Open information extraction

  In natural language processing, open information extraction (OIE) is the task of generating a structured, machine-readable representation of the information in text, usually in the form of triples or n-ary propositions. == Overview == A proposition can be understood as truth-bearer, a textual expression of a potential fact (e.g., "Dante wrote the Divine Comedy"), represented in an amenable structure for computers [e.g., ("Dante", "wrote", "Divine Comedy")]. An OIE extraction normally consists of a relation and a set of arguments. For instance, ("Dante", "passed away in" "Ravenna") is a proposition formed by the relation "passed away in" and the arguments "Dante" and "Ravenna". The first argument is usually referred as the subject while the second is considered to be the object. The extraction is said to be a textual representation of a potential fact because its elements are not linked to a knowledge base. Furthermore, the factual nature of the proposition has not yet been established. In the above example, transforming the extraction into a full fledged fact would first require linking, if possible, the relation and the arguments to a knowledge base. Second, the truth of the extraction would need to be determined. In computer science transforming OIE extractions into ontological facts is known as relation extraction. In fact, OIE can be seen as the first step to a wide range of deeper text understanding tasks such as relation extraction, knowledge-base construction, question answering, semantic role labeling. The extracted propositions can also be directly used for end-user applications such as structured search (e.g., retrieve all propositions with "Dante" as subject). OIE was first introduced by TextRunner developed at the University of Washington Turing Center headed by Oren Etzioni. Other methods introduced later such as Reverb, OLLIE, ClausIE or CSD helped to shape the OIE task by characterizing some of its aspects. At a high level, all of these approaches make use of a set of patterns to generate the extractions. Depending on the particular approach, these patterns are either hand-crafted or learned. == OIE systems and contributions == Reverb suggested the necessity to produce meaningful relations to more accurately capture the information in the input text. For instance, given the sentence "Faust made a pact with the devil", it would be erroneous to just produce the extraction ("Faust", "made", "a pact") since it would not be adequately informative. A more precise extraction would be ("Faust", "made a pact with", "the devil"). Reverb also argued against the generation of overspecific relations. OLLIE stressed two important aspects for OIE. First, it pointed to the lack of factuality of the propositions. For instance, in a sentence like "If John studies hard, he will pass the exam", it would be inaccurate to consider ("John", "will pass", "the exam") as a fact. Additionally, the authors indicated that an OIE system should be able to extract non-verb mediated relations, which account for significant portion of the information expressed in natural language text. For instance, in the sentence "Obama, the former US president, was born in Hawaii", an OIE system should be able to recognize a proposition ("Obama", "is", "former US president"). ClausIE introduced the connection between grammatical clauses, propositions, and OIE extractions. The authors stated that as each grammatical clause expresses a proposition, each verb mediated proposition can be identified by solely recognizing the set of clauses expressed in each sentence. This implies that to correctly recognize the set of propositions in an input sentence, it is necessary to understand its grammatical structure. The authors studied the case in the English language that only admits seven clause types, meaning that the identification of each proposition only requires defining seven grammatical patterns. The finding also established a separation between the recognition of the propositions and its materialization. In a first step, the proposition can be identified without any consideration of its final form, in a domain-independent and unsupervised way, mostly based on linguistic principles. In a second step, the information can be represented according to the requirements of the underlying application, without conditioning the identification phase. Consider the sentence "Albert Einstein was born in Ulm and died in Princeton". The first step will recognize the two propositions ("Albert Einstein", "was born", "in Ulm") and ("Albert Einstein", "died", "in Princeton"). Once the information has been correctly identified, the propositions can take the particular form required by the underlying application [e.g., ("Albert Einstein", "was born in", "Ulm") and ("Albert Einstein", "died in", "Princeton")]. CSD introduced the idea of minimality in OIE. It considers that computers can make better use of the extractions if they are expressed in a compact way. This is especially important in sentences with subordinate clauses. In these cases, CSD suggests the generation of nested extractions. For example, consider the sentence "The Embassy said that 6,700 Americans were in Pakistan". CSD generates two extractions [i] ("6,700 Americans", "were", "in Pakistan") and [ii] ("The Embassy", "said", "that [i]"). This is usually known as reification.

  Read more →
• 

  Language identification

  In natural language processing, language identification or language guessing is the problem of determining which natural language a given content is in. Computational approaches to this problem view it as a special case of text categorization, solved with various statistical methods. == Overview == === Logical approach === A common non-statistical intuitive approach (though highly uncertain) is to look for common letter combinations, or distinctive diacritics or punctuation. === Statistical approach === There are several statistical approaches to language identification. An older statistical method by Grefenstette was based on the frequency of short n-grams, which are often function morphemes. For example, "ing" is more common in English than in French, while the sequence "que" is more common in French. Given a new page found on the Web, one counts the number of occurrences of each such short sequence and picks the language whose frequency table it matches the most. One technique is to compare the compressibility of the text to the compressibility of texts in a set of known languages. This approach is known as mutual information based distance measure. The same technique can also be used to empirically construct family trees of languages which closely correspond to the trees constructed using historical methods. Mutual information based distance measure is essentially equivalent to more conventional model-based methods and is not generally considered to be either novel or better than simpler techniques. Another technique, as described by Cavnar and Trenkle (1994) and Dunning (1994) is to create a language n-gram model from a "training text" for each of the languages. These models can be based on characters (Cavnar and Trenkle) or encoded bytes (Dunning); in the latter, language identification and character encoding detection are integrated. Then, for any piece of text needing to be identified, a similar model is made, and that model is compared to each stored language model. The most likely language is the one with the model that is most similar to the model from the text needing to be identified. This approach can be problematic when the input text is in a language for which there is no model. In that case, the method may return another, "most similar" language as its result. Also problematic for any approach are pieces of input text that are composed of several languages, as is common on the Web. As of 2025, a commonly used baseline method is via the fastText library, which has comparable classification accuracy as deep learning techniques, but much faster. == Identifying similar languages == One of the great bottlenecks of language identification systems is to distinguish between closely related languages. Similar languages like Bulgarian and Macedonian or Indonesian and Malay present significant lexical and structural overlap, making it challenging for systems to discriminate between them. In 2014 the DSL shared task has been organized providing a dataset (Tan et al., 2014) containing 13 different languages (and language varieties) in six language groups: Group A (Bosnian, Croatian, Serbian), Group B (Indonesian, Malaysian), Group C (Czech, Slovak), Group D (Brazilian Portuguese, European Portuguese), Group E (Peninsular Spanish, Argentine Spanish), Group F (American English, British English). The best system reached performance of over 95% results (Goutte et al., 2014). Results of the DSL shared task are described in Zampieri et al. 2014. == Software == Apache OpenNLP includes char n-gram based statistical detector and comes with a model that can distinguish 103 languages Apache Tika contains a language detector for 18 languages

  Read more →