AI Coding Using Python

AI Coding Using Python — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Spanner (database)

  Spanner is a distributed SQL database management and storage service developed by Google. It provides features such as global transactions, strongly consistent reads, and automatic multi-site replication and failover. Spanner is used in Google F1, the database for its advertising business Google Ads, as well as Gmail and Google Photos. == Features == Spanner stores large amounts of mutable structured data. Spanner allows users to perform arbitrary queries using SQL with relational data while maintaining strong consistency and high availability for that data with synchronous replication. Key features of Spanner: Transactions can be applied across rows, columns, tables, and databases within a Spanner universe. Clients can control the replication and placement of data using automatic multi-site replication and failover. Replication is synchronous and strongly consistent. Reads are strongly consistent and data is versioned to allow for stale reads: clients can read previous versions of data, subject to garbage collection windows. Supports a native SQL interface for reading and writing data. Support for Graph Query Language == History == Spanner was first described in 2012 for internal Google data centers. Spanner's SQL capability was added in 2017 and documented in a SIGMOD 2017 paper. It became available as part of Google Cloud Platform in 2017, under the name "Cloud Spanner". == Architecture == Spanner uses the Paxos algorithm as part of its operation to shard (partition) data across up to hundreds of servers. It makes heavy use of hardware-assisted clock synchronization using GPS clocks and atomic clocks to ensure global consistency. TrueTime is the brand name for Google's distributed cloud infrastructure, which provides Spanner with the ability to generate monotonically increasing timestamps in data centers around the world. Google's F1 SQL database management system (DBMS) is built on top of Spanner, replacing Google's custom MySQL variant.

  Read more →
• 

  Semidefinite embedding

  Maximum Variance Unfolding (MVU), also known as Semidefinite Embedding (SDE), is an algorithm in computer science that uses semidefinite programming to perform non-linear dimensionality reduction of high-dimensional vectorial input data. It is motivated by the observation that kernel Principal Component Analysis (kPCA) does not reduce the data dimensionality, as it leverages the Kernel trick to non-linearly map the original data into an inner-product space. == Algorithm == MVU creates a mapping from the high dimensional input vectors to some low dimensional Euclidean vector space in the following steps: A neighbourhood graph is created. Each input is connected with its k-nearest input vectors (according to Euclidean distance metric) and all k-nearest neighbors are connected with each other. If the data is sampled well enough, the resulting graph is a discrete approximation of the underlying manifold. The neighbourhood graph is "unfolded" with the help of semidefinite programming. Instead of learning the output vectors directly, the semidefinite programming aims to find an inner product matrix that maximizes the pairwise distances between any two inputs that are not connected in the neighbourhood graph while preserving the nearest neighbors distances. The low-dimensional embedding is finally obtained by application of multidimensional scaling on the learned inner product matrix. The steps of applying semidefinite programming followed by a linear dimensionality reduction step to recover a low-dimensional embedding into a Euclidean space were first proposed by Linial, London, and Rabinovich. == Optimization formulation == Let X {\displaystyle X\,\!} be the original input and Y {\displaystyle Y\,\!} be the embedding. If i , j {\displaystyle i,j\,\!} are two neighbors, then the local isometry constraint that needs to be satisfied is: | X i − X j | 2 = | Y i − Y j | 2 {\displaystyle |X_{i}-X_{j}|^{2}=|Y_{i}-Y_{j}|^{2}\,\!} Let G , K {\displaystyle G,K\,\!} be the Gram matrices of X {\displaystyle X\,\!} and Y {\displaystyle Y\,\!} (i.e.: G i j = X i ⋅ X j , K i j = Y i ⋅ Y j {\displaystyle G_{ij}=X_{i}\cdot X_{j},K_{ij}=Y_{i}\cdot Y_{j}\,\!} ). We can express the above constraint for every neighbor points i , j {\displaystyle i,j\,\!} in term of G , K {\displaystyle G,K\,\!} : G i i + G j j − G i j − G j i = K i i + K j j − K i j − K j i {\displaystyle G_{ii}+G_{jj}-G_{ij}-G_{ji}=K_{ii}+K_{jj}-K_{ij}-K_{ji}\,\!} In addition, we also want to constrain the embedding Y {\displaystyle Y\,\!} to center at the origin: 0 = | ∑ i Y i | 2 ⇔ ( ∑ i Y i ) ⋅ ( ∑ i Y i ) ⇔ ∑ i , j Y i ⋅ Y j ⇔ ∑ i , j K i j {\displaystyle 0=|\sum _{i}Y_{i}|^{2}\Leftrightarrow (\sum _{i}Y_{i})\cdot (\sum _{i}Y_{i})\Leftrightarrow \sum _{i,j}Y_{i}\cdot Y_{j}\Leftrightarrow \sum _{i,j}K_{ij}} As described above, except the distances of neighbor points are preserved, the algorithm aims to maximize the pairwise distance of every pair of points. The objective function to be maximized is: T ( Y ) = 1 2 N ∑ i , j | Y i − Y j | 2 {\displaystyle T(Y)={\dfrac {1}{2N}}\sum _{i,j}|Y_{i}-Y_{j}|^{2}} Intuitively, maximizing the function above is equivalent to pulling the points as far away from each other as possible and therefore "unfold" the manifold. The local isometry constraint Let τ = m a x { η i j | Y i − Y j | 2 } {\displaystyle \tau =max\{\eta _{ij}|Y_{i}-Y_{j}|^{2}\}\,\!} where η i j := { 1 if i is a neighbour of j 0 otherwise . {\displaystyle \eta _{ij}:={\begin{cases}1&{\mbox{if}}\ i{\mbox{ is a neighbour of }}j\\0&{\mbox{otherwise}}.\end{cases}}} prevents the objective function from diverging (going to infinity). Since the graph has N points, the distance between any two points | Y i − Y j | 2 ≤ N τ {\displaystyle |Y_{i}-Y_{j}|^{2}\leq N\tau \,\!} . We can then bound the objective function as follows: T ( Y ) = 1 2 N ∑ i , j | Y i − Y j | 2 ≤ 1 2 N ∑ i , j ( N τ ) 2 = N 3 τ 2 2 {\displaystyle T(Y)={\dfrac {1}{2N}}\sum _{i,j}|Y_{i}-Y_{j}|^{2}\leq {\dfrac {1}{2N}}\sum _{i,j}(N\tau )^{2}={\dfrac {N^{3}\tau ^{2}}{2}}\,\!} The objective function can be rewritten purely in the form of the Gram matrix: T ( Y ) = 1 2 N ∑ i , j | Y i − Y j | 2 = 1 2 N ∑ i , j ( Y i 2 + Y j 2 − Y i ⋅ Y j − Y j ⋅ Y i ) = 1 2 N ( ∑ i , j Y i 2 + ∑ i , j Y j 2 − ∑ i , j Y i ⋅ Y j − ∑ i , j Y j ⋅ Y i ) = 1 2 N ( ∑ i , j Y i 2 + ∑ i , j Y j 2 − 0 − 0 ) = 1 N ( ∑ i Y i 2 ) = 1 N ( T r ( K ) ) {\displaystyle {\begin{aligned}T(Y)&{}={\dfrac {1}{2N}}\sum _{i,j}|Y_{i}-Y_{j}|^{2}\\&{}={\dfrac {1}{2N}}\sum _{i,j}(Y_{i}^{2}+Y_{j}^{2}-Y_{i}\cdot Y_{j}-Y_{j}\cdot Y_{i})\\&{}={\dfrac {1}{2N}}(\sum _{i,j}Y_{i}^{2}+\sum _{i,j}Y_{j}^{2}-\sum _{i,j}Y_{i}\cdot Y_{j}-\sum _{i,j}Y_{j}\cdot Y_{i})\\&{}={\dfrac {1}{2N}}(\sum _{i,j}Y_{i}^{2}+\sum _{i,j}Y_{j}^{2}-0-0)\\&{}={\dfrac {1}{N}}(\sum _{i}Y_{i}^{2})={\dfrac {1}{N}}(Tr(K))\\\end{aligned}}\,\!} Finally, the optimization can be formulated as: Maximize T r ( K ) subject to K ⪰ 0 , ∑ i j K i j = 0 and G i i + G j j − G i j − G j i = K i i + K j j − K i j − K j i , ∀ i , j where η i j = 1 , {\displaystyle {\begin{aligned}&{\text{Maximize}}&&Tr(\mathbf {K} )\\&{\text{subject to}}&&\mathbf {K} \succeq 0,\sum _{ij}\mathbf {K} _{ij}=0\\&{\text{and}}&&G_{ii}+G_{jj}-G_{ij}-G_{ji}=K_{ii}+K_{jj}-K_{ij}-K_{ji},\forall i,j{\mbox{ where }}\eta _{ij}=1,\end{aligned}}} After the Gram matrix K {\displaystyle K\,\!} is learned by semidefinite programming, the output Y {\displaystyle Y\,\!} can be obtained via Cholesky decomposition. In particular, the Gram matrix can be written as K i j = ∑ α = 1 N ( λ α V α i V α j ) {\displaystyle K_{ij}=\sum _{\alpha =1}^{N}(\lambda _{\alpha }V_{\alpha i}V_{\alpha j})\,\!} where V α i {\displaystyle V_{\alpha i}\,\!} is the i-th element of eigenvector V α {\displaystyle V_{\alpha }\,\!} of the eigenvalue λ α {\displaystyle \lambda _{\alpha }\,\!} . It follows that the α {\displaystyle \alpha \,\!} -th element of the output Y i {\displaystyle Y_{i}\,\!} is λ α V α i {\displaystyle {\sqrt {\lambda _{\alpha }}}V_{\alpha i}\,\!} .

  Read more →
• 

  Ordinal regression

  In statistics, ordinal regression, also called ordinal classification, is a type of regression analysis used for predicting an ordinal variable, i.e. a variable whose value exists on an arbitrary scale where only the relative ordering between different values is significant. It can be considered an intermediate problem between regression and classification. Examples of ordinal regression are ordered logit and ordered probit. Ordinal regression turns up often in the social sciences, for example in the modeling of human levels of preference (on a scale from, say, 1–5 for "very poor" through "excellent"), as well as in information retrieval. In machine learning, ordinal regression may also be called ranking learning. == Linear models for ordinal regression == Ordinal regression can be performed using a generalized linear model (GLM) that fits both a coefficient vector and a set of thresholds to a dataset. Suppose one has a set of observations, represented by length-p vectors x1 through xn, with associated responses y1 through yn, where each yi is an ordinal variable on a scale 1, ..., K. For simplicity, and without loss of generality, we assume y is a non-decreasing vector, that is, yi ≤ {\displaystyle \leq } yi+1. To this data, one fits a length-p coefficient vector w and a set of thresholds θ1, ..., θK−1 with the property that θ1 < θ2 < ... < θK−1. This set of thresholds divides the real number line into K disjoint segments, corresponding to the K response levels. The model can now be formulated as Pr ( y ≤ i ∣ x ) = σ ( θ i − w ⋅ x ) {\displaystyle \Pr(y\leq i\mid \mathbf {x} )=\sigma (\theta _{i}-\mathbf {w} \cdot \mathbf {x} )} or, the cumulative probability of the response y being at most i is given by a function σ (the inverse link function) applied to a linear function of x. Several choices exist for σ; the logistic function σ ( θ i − w ⋅ x ) = 1 1 + e − ( θ i − w ⋅ x ) {\displaystyle \sigma (\theta _{i}-\mathbf {w} \cdot \mathbf {x} )={\frac {1}{1+e^{-(\theta _{i}-\mathbf {w} \cdot \mathbf {x} )}}}} gives the ordered logit model, while using the CDF of the standard normal distribution gives the ordered probit model. A third option is to use an exponential function σ ( θ i − w ⋅ x ) = 1 − exp ⁡ ( − exp ⁡ ( θ i − w ⋅ x ) ) {\displaystyle \sigma (\theta _{i}-\mathbf {w} \cdot \mathbf {x} )=1-\exp(-\exp(\theta _{i}-\mathbf {w} \cdot \mathbf {x} ))} which gives the proportional hazards model. === Latent variable model === The probit version of the above model can be justified by assuming the existence of a real-valued latent variable (unobserved quantity) y, determined by y ∗ = w ⋅ x + ε {\displaystyle y^{}=\mathbf {w} \cdot \mathbf {x} +\varepsilon } where ε is normally distributed with zero mean and unit variance, conditioned on x. The response variable y results from an "incomplete measurement" of y, where one only determines the interval into which y falls: y = { 1 if y ∗ ≤ θ 1 , 2 if θ 1 < y ∗ ≤ θ 2 , 3 if θ 2 < y ∗ ≤ θ 3 ⋮ K if θ K − 1 < y ∗ . {\displaystyle y={\begin{cases}1&{\text{if}}~~y^{}\leq \theta _{1},\\2&{\text{if}}~~\theta _{1} Read more →

• 

  Correspondence analysis

  Correspondence analysis (CA) is a multivariate statistical technique proposed by Herman Otto Hartley (Hirschfeld) and later developed by Jean-Paul Benzécri. It is conceptually similar to principal component analysis, but applies to categorical rather than continuous data. In a manner similar to principal component analysis, it provides a means of displaying or summarising a set of data in two-dimensional graphical form. Its aim is to display in a biplot any structure hidden in the multivariate setting of the data table. As such it is a technique from the field of multivariate ordination. Since the variant of CA described here can be applied either with a focus on the rows or on the columns it should in fact be called simple (symmetric) correspondence analysis. It is traditionally applied to the contingency table of a pair of nominal variables where each cell contains either a count or a zero value. If more than two categorical variables are to be summarized, a variant called multiple correspondence analysis should be chosen instead. CA may also be applied to binary data given the presence/absence coding represents simplified count data i.e. a 1 describes a positive count and 0 stands for a count of zero. Depending on the scores used CA preserves the chi-square distance between either the rows or the columns of the table. Because CA is a descriptive technique, it can be applied to tables regardless of a significant chi-squared test. Although the χ 2 {\displaystyle \chi ^{2}} statistic used in inferential statistics and the chi-square distance are computationally related they should not be confused since the latter works as a multivariate statistical distance measure in CA while the χ 2 {\displaystyle \chi ^{2}} statistic is in fact a scalar not a metric. == Details == Like principal components analysis, correspondence analysis creates orthogonal components (or axes) and, for each item in a table i.e. for each row, a set of scores (sometimes called factor scores, see Factor analysis). Correspondence analysis is performed on the data table, conceived as matrix C of size m × n where m is the number of rows and n is the number of columns. In the following mathematical description of the method capital letters in italics refer to a matrix while letters in italics refer to vectors. Understanding the following computations requires knowledge of matrix algebra. === Preprocessing === Before proceeding to the central computational step of the algorithm, the values in matrix C have to be transformed. First compute a set of weights for the columns and the rows (sometimes called masses), where row and column weights are given by the row and column vectors, respectively: w m = 1 n C C 1 , w n = 1 n C 1 T C . {\displaystyle w_{m}={\frac {1}{n_{C}}}C\mathbf {1} ,\quad w_{n}={\frac {1}{n_{C}}}\mathbf {1} ^{T}C.} Here n C = ∑ i = 1 n ∑ j = 1 m C i j {\displaystyle n_{C}=\sum _{i=1}^{n}\sum _{j=1}^{m}C_{ij}} is the sum of all cell values in matrix C, or short the sum of C, and 1 {\displaystyle \mathbf {1} } is a column vector of ones with the appropriate dimension. Put in simple words, w m {\displaystyle w_{m}} is just a vector whose elements are the row sums of C divided by the sum of C, and w n {\displaystyle w_{n}} is a vector whose elements are the column sums of C divided by the sum of C. The weights are transformed into diagonal matrices W m = diag ⁡ ( 1 / w m ) {\displaystyle W_{m}=\operatorname {diag} (1/{\sqrt {w_{m}}})} and W n = diag ⁡ ( 1 / w n ) {\displaystyle W_{n}=\operatorname {diag} (1/{\sqrt {w_{n}}})} where the diagonal elements of W n {\displaystyle W_{n}} are 1 / w n {\displaystyle 1/{\sqrt {w_{n}}}} and those of W m {\displaystyle W_{m}} are 1 / w m {\displaystyle 1/{\sqrt {w_{m}}}} respectively i.e. the vector elements are the inverses of the square roots of the masses. The off-diagonal elements are all 0. Next, compute matrix P {\displaystyle P} by dividing C {\displaystyle C} by its sum P = 1 n C C . {\displaystyle P={\frac {1}{n_{C}}}C.} In simple words, Matrix P {\displaystyle P} is just the data matrix (contingency table or binary table) transformed into portions i.e. each cell value is just the cell portion of the sum of the whole table. Finally, compute matrix S {\displaystyle S} , sometimes called the matrix of standardized residuals, by matrix multiplication as S = W m ( P − w m w n ) W n {\displaystyle S=W_{m}(P-w_{m}w_{n})W_{n}} Note, the vectors w m {\displaystyle w_{m}} and w n {\displaystyle w_{n}} are combined in an outer product resulting in a matrix of the same dimensions as P {\displaystyle P} . In words the formula reads: matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} is subtracted from matrix P {\displaystyle P} and the resulting matrix is scaled (weighted) by the diagonal matrices W m {\displaystyle W_{m}} and W n {\displaystyle W_{n}} . Multiplying the resulting matrix by the diagonal matrices is equivalent to multiply the i-th row (or column) of it by the i-th element of the diagonal of W m {\displaystyle W_{m}} or W n {\displaystyle W_{n}} , respectively. === Interpretation of preprocessing === The vectors w m {\displaystyle w_{m}} and w n {\displaystyle w_{n}} are the row and column masses or the marginal probabilities for the rows and columns, respectively. Subtracting matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} from matrix P {\displaystyle P} is the matrix algebra version of double centering the data. Multiplying this difference by the diagonal weighting matrices results in a matrix containing weighted deviations from the origin of a vector space. This origin is defined by matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} . In fact matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} is identical with the matrix of expected frequencies in the chi-squared test. Therefore S {\displaystyle S} is computationally related to the independence model used in that test. But since CA is not an inferential method the term independence model is inappropriate here. === Orthogonal components === The table S {\displaystyle S} is then decomposed by a singular value decomposition as S = U Σ V ∗ {\displaystyle S=U\Sigma V^{}\,} where U {\displaystyle U} and V {\displaystyle V} are the left and right singular vectors of S {\displaystyle S} and Σ {\displaystyle \Sigma } is a square diagonal matrix with the singular values σ i {\displaystyle \sigma _{i}} of S {\displaystyle S} on the diagonal. Σ {\displaystyle \Sigma } is of dimension p ≤ ( min ( m , n ) − 1 ) {\displaystyle p\leq (\min(m,n)-1)} hence U {\displaystyle U} is of dimension m×p and V {\displaystyle V} is of n×p. As orthonormal vectors U {\displaystyle U} and V {\displaystyle V} fulfill U ∗ U = V ∗ V = I {\displaystyle U^{}U=V^{}V=I} . In other words, the multivariate information that is contained in C {\displaystyle C} as well as in S {\displaystyle S} is now distributed across two (coordinate) matrices U {\displaystyle U} and V {\displaystyle V} and a diagonal (scaling) matrix Σ {\displaystyle \Sigma } . The vector space defined by them has as number of dimensions p, that is the smaller of the two values, number of rows and number of columns, minus 1. === Inertia === While a principal component analysis may be said to decompose the (co)variance, and hence its measure of success is the amount of (co-)variance covered by the first few PCA axes - measured in eigenvalue -, a CA works with a weighted (co-)variance which is called inertia. The sum of the squared singular values is the total inertia I {\displaystyle \mathrm {I} } of the data table, computed as I = ∑ i = 1 p σ i 2 . {\displaystyle \mathrm {I} =\sum _{i=1}^{p}\sigma _{i}^{2}.} The total inertia I {\displaystyle \mathrm {I} } of the data table can also computed directly from S {\displaystyle S} as I = ∑ i = 1 n ∑ j = 1 m s i j 2 . {\displaystyle \mathrm {I} =\sum _{i=1}^{n}\sum _{j=1}^{m}s_{ij}^{2}.} The amount of inertia covered by the i-th set of singular vectors is ι i {\displaystyle \iota _{i}} , the principal inertia. The higher the portion of inertia covered by the first few singular vectors i.e. the larger the sum of the principal inertiae in comparison to the total inertia, the more successful a CA is. Therefore, all principal inertia values are expressed as portion ϵ i {\displaystyle \epsilon _{i}} of the total inertia ϵ i = σ i 2 / ∑ i = 1 p σ i 2 {\displaystyle \epsilon _{i}=\sigma _{i}^{2}/\sum _{i=1}^{p}\sigma _{i}^{2}} and are presented in the form of a scree plot. In fact a scree plot is just a bar plot of all principal inertia portions ϵ i {\displaystyle \epsilon _{i}} . === Coordinates === To transform the singular vectors to coordinates which preserve the chi-square distances between rows or columns an additional weighting step is necessary. The resulting coordinates are called principal coordinates in CA text books. If principal coordinates are used for

  Read more →
• 

  Color layout descriptor

  In digital image and video processing, a color layout descriptor (CLD) is designed to capture the spatial distribution of color in an image. The feature extraction process consists of two parts: grid based representative color selection and discrete cosine transform with quantization. Color is the most basic quality of the visual contents, therefore it is possible to use colors to describe and represent an image. The MPEG-7 standard has tested the most efficient procedure to describe the color and has selected those that have provided more satisfactory results. This standard proposes different methods to obtain these descriptors, and one tool defined to describe the color is the CLD, that permits describing the color relation between sequences or group of images. The CLD captures the spatial layout of the representative colors on a grid superimposed on a region or image. Representation is based on coefficients of the discrete cosine transform (DCT). This is a very compact descriptor being highly efficient in fast browsing and search applications. It can be applied to still images as well as to video segments. == Definition == The CLD is a very compact and resolution-invariant representation of color for high-speed image retrieval and it has been designed to efficiently represent the spatial distribution of colors. This feature can be used for a wide variety of similarity-based retrieval, content filtering and visualization. It is especially useful for spatial structure-based retrieval applications. This descriptor is obtained by applying the DCT transformation on a 2-D array of local representative colors in Y or Cb or Cr color space. The functionalities of the CLD are basically the matching: – Image-to-image matching – Video clip-to-video clip matching Remark that the CLD is one of the most precise and fast color descriptor. == Extraction == The extraction process of this color descriptor consists of four stages: Image partitioning Representative color selection DCT transformation Zigzag scanning The standard MPEG-7 recommends using the YCbCr color space for the CLD. === Image partitioning === In the image partitioning stage, the input picture (on RGB color space) is divided into 64 blocks to guarantee the invariance to resolution or scale. The inputs and outputs of this step are summarized in the following table: === Representative color selection === After the image partitioning stage, a single representative color is selected from each block. Any method to select the representative color can be applied, but the standard recommends the use of the average of the pixel colors in a block as the corresponding representative color, since it is simpler and the description accuracy is sufficient in general. The selection results in a tiny image icon of size 8x8. The next figure shows this process. Note that in the image of the figure, the resolution of the original image has been maintained only in order to facilitate its representation. The inputs and outputs of this stage are summarized in the next table: Once the tiny image icon is obtained, the color space conversion between RGB and YCbCr is applied. === DCT transformation === In the fourth stage, the luminance (Y) and the blue and red chrominance (Cb and Cr) are transformed by 8x8 DCT, so three sets of 64 DCT coefficients are obtained. To calculate the DCT in a 2D array, the formulas below are used. B p q = α p α q ∑ m = 0 M − 1 ∑ n = 0 N − 1 A m n cos ⁡ π ( 2 m + 1 ) p 2 M cos ⁡ π ( 2 n + 1 ) q 2 N , 0 ≤ p ≤ M − 1 , 0 ≤ q ≤ N − 1 {\displaystyle B_{pq}=\alpha _{p}\alpha _{q}\sum _{m=0}^{M-1}\sum _{n=0}^{N-1}A_{mn}\cos {\frac {\pi (2m+1)p}{2M}}\cos {\frac {\pi (2n+1)q}{2N}},\qquad 0\leq p\leq M-1,\;0\leq q\leq N-1} α p = { 1 M , p = 0 2 M , 1 ≤ p ≤ M − 1 α q = { 1 N , q = 0 2 N , 1 ≤ q ≤ N − 1 {\displaystyle \alpha _{p}={\begin{cases}{\frac {1}{\sqrt {M}}},&p=0\\{\sqrt {\frac {2}{M}}},&1\leq p\leq M-1\end{cases}}\qquad \alpha _{q}={\begin{cases}{\frac {1}{\sqrt {N}}},&q=0\\{\sqrt {\frac {2}{N}}},&1\leq q\leq N-1\end{cases}}} The inputs and outputs of this stage are summarized in the next table: === Zigzag scanning === A zigzag scanning is performed with these three sets of 64 DCT coefficients, following the schema presented in the figure. The purpose of the zigzag scan is to group the low frequency coefficients of the 8x8 matrix into a vector. The inputs and outputs of this stage are summarized in the next table: Finally, these three set of matrices correspond to the CLD of the input image. == Matching == The matching process helps to evaluate if two elements are equal comparing both elements and calculating the distance between them. In the case of color descriptors the matching process helps to evaluate if two images are similar. Its procedure is the following: – Given an image as an input, the application attempts to find an image with a similar descriptor in a data base of images. If we consider two CLDs: {DY, DCb, DCr} { DY‟, DCb‟, DCr‟ }, The distance between the two descriptors can be computed as: D = ∑ i w y i ( D Y i − D Y i ′ ) 2 + ∑ i w b i ( D C b i − D C b i ′ ) 2 + ∑ i w r i ( D C r i − D C r i ′ ) 2 {\displaystyle D={\sqrt {\sum _{i}w_{yi}(DY_{i}-DY_{i}')^{2}}}+{\sqrt {\sum _{i}w_{bi}(DCb_{i}-DCb_{i}')^{2}}}+{\sqrt {\sum _{i}w_{ri}(DCr_{i}-DCr_{i}')^{2}}}} The subscript i represents the zigzag-scanning order of the coefficients. Furthermore, notice that is possible to weight the coefficients (w) in order to adjust the performance of the matching process. These weights let us give to some components of the descriptor more importance than others. Observing the formula, it can be extracted that: – 2 images are the same if the distance is 0 – 2 images are similar if the distance is near to 0 Therefore, this matching process will let to identify images with similar color descriptors. Since the complexity of the similarity matching process shown above is low, high-speed image matching can be achieved.

  Read more →
• 

  Multiple discriminant analysis

  Multiple Discriminant Analysis (MDA) is a multivariate dimensionality reduction technique. It has been used to predict signals as diverse as neural memory traces and corporate failure. MDA is not directly used to perform classification. It merely supports classification by yielding a compressed signal amenable to classification. The method described in Duda et al. (2001) §3.8.3 projects the multivariate signal down to an M−1 dimensional space where M is the number of categories. MDA is useful because most classifiers are strongly affected by the curse of dimensionality. In other words, when signals are represented in very-high-dimensional spaces, the classifier's performance is catastrophically impaired by the overfitting problem. This problem is reduced by compressing the signal down to a lower-dimensional space as MDA does. MDA has been used to reveal neural codes.

  Read more →
• 

  Rectified linear unit

  In the context of artificial neural networks, the rectifier or ReLU (rectified linear unit) activation function is an activation function defined as the non-negative part of its argument, i.e., the ramp function: ReLU ⁡ ( x ) = x + = max ( 0 , x ) = x + | x | 2 = { x if x > 0 , 0 x ≤ 0 {\displaystyle \operatorname {ReLU} (x)=x^{+}=\max(0,x)={\frac {x+|x|}{2}}={\begin{cases}x&{\text{if }}x>0,\\0&x\leq 0\end{cases}}} where x {\displaystyle x} is the input to a neuron. This is analogous to half-wave rectification in electrical engineering. ReLU is one of the most popular activation functions for artificial neural networks, and finds application in computer vision and speech recognition using deep neural nets and computational neuroscience. == History == The ReLU was first used by Alston Householder in 1941 as a mathematical abstraction of biological neural networks. Kunihiko Fukushima in 1969 used ReLU in the context of visual feature extraction in hierarchical neural networks. In 1998, Gregory Woodbury demonstrated that the rectified linear function could account for a broad range of emergent properties in the visual cortex. His work showed that a single unified model could drive the joint development of refined retinotopic maps, ocular dominance columns, and orientation selectivity. By utilizing the rectifier's "cutoff" property, Woodbury achieved a close quantitative fit to biological data, matching the spatial periodicities and topographic refinement patterns observed in macaque and cat cortical maps. Furthermore, he extended this framework to adult plasticity, accurately replicating the spatial and temporal dynamics of lesion-induced cortical reorganization. This research established that the rectified linear response was a necessary mechanism for the stable self-organisation and maintenance of complex, multi-feature neural maps. In 2000, Hahnloser et al. argued that ReLU approximates the biological relationship between neural firing rates and input current, in addition to enabling recurrent neural network dynamics to stabilise under weaker criteria. Prior to 2010, most activation functions used were the logistic sigmoid (which is inspired by probability theory; see logistic regression) and its more numerically efficient counterpart, the hyperbolic tangent. Around 2010, the use of ReLU became common again. Jarrett et al. (2009) noted that rectification by either absolute or ReLU (which they called "positive part") was critical for object recognition in convolutional neural networks (CNNs), specifically because it allows average pooling without neighboring filter outputs cancelling each other out. They hypothesized that the use of sigmoid or tanh was responsible for poor performance in previous CNNs. Nair and Hinton (2010) made a theoretical argument that the softplus activation function should be used, in that the softplus function numerically approximates the sum of an exponential number of linear models that share parameters. They then proposed ReLU as a good approximation to it. Specifically, they began by considering a single binary neuron in a Boltzmann machine that takes x {\displaystyle x} as input, and produces 1 as output with probability σ ( x ) = 1 1 + e − x {\displaystyle \sigma (x)={\frac {1}{1+e^{-x}}}} . They then considered extending its range of output by making infinitely many copies of it X 1 , X 2 , X 3 , … {\displaystyle X_{1},X_{2},X_{3},\dots } , that all take the same input, offset by an amount 0.5 , 1.5 , 2.5 , … {\displaystyle 0.5,1.5,2.5,\dots } , then their outputs are added together as ∑ i = 1 ∞ X i {\displaystyle \sum _{i=1}^{\infty }X_{i}} . They then demonstrated that ∑ i = 1 ∞ X i {\displaystyle \sum _{i=1}^{\infty }X_{i}} is approximately equal to N ( log ⁡ ( 1 + e x ) , σ ( x ) ) {\displaystyle {\mathcal {N}}(\log(1+e^{x}),\sigma (x))} , which is also approximately equal to ReLU ⁡ ( N ( x , σ ( x ) ) ) {\displaystyle \operatorname {ReLU} ({\mathcal {N}}(x,\sigma (x)))} , where N {\displaystyle {\mathcal {N}}} stands for the gaussian distribution. They also argued for another reason for using ReLU: that it allows "intensity equivariance" in image recognition. That is, multiplying input image by a constant k {\displaystyle k} multiplies the output also. In contrast, this is false for other activation functions like sigmoid or tanh. They found that ReLU activation allowed good empirical performance in restricted Boltzmann machines. Glorot et al (2011) argued that ReLU has the following advantages over sigmoid or tanh: ReLU is more similar to biological neurons' responses in their main operating regime. ReLU avoids vanishing gradients. ReLU is cheaper to compute. ReLU creates sparse representation naturally, because many hidden units output exactly zero for a given input. They also found empirically that deep networks trained with ReLU can achieve strong performance without unsupervised pre-training, especially on large, purely supervised tasks. In 2017, the rectified linear function became a central component of the transformer architecture introduced in the Vaswani et al paper "Attention Is All You Need". Within every transformer layer, ReLU is utilized in the position-wise feed-forward networks (FFN), defined by Equation 2 of their paper: FFN ⁡ ( x ) = max ( 0 , x W 1 + b 1 ) W 2 + b 2 {\displaystyle \operatorname {FFN} (x)=\max(0,xW_{1}+b_{1})W_{2}+b_{2}} This equation is foundational to the model's capacity; while the attention mechanism determines the relationships between tokens, the ReLU-based FFN performs the majority of the numerical computation and houses the bulk of the model's parameters. The efficiency and scalability of this rectified framework triggered a global technological revolution, enabling the development of Large Language Models that have had a profound economic impact. The industrial response to this architecture—including the massive expansion of AI-specific hardware and the birth of the generative AI sector—has positioned the Transformer as a cornerstone of 21st-century infrastructure. During the post 2017 period of rapid AI advancement, the rectified linear unit function has been key to achieving increased model performance and scaling due to the fact that it zeros out responses that are immaterial for a given stimuli, preventing them from accumulating in massive scale models. It is the complete silencing of the parts of the model found to be stimuli-irrelevant during learning that allows for scaling. As the stimuli-irrelevant proportion of the model becomes more massive, these highly numerous connections within the model would inevitably accumulate during scaling no matter how small each individual response is. Therefore, the rectified linear unit function, with its absolute zeroing property, enabled the scaling to hundred billion parameter models and beyond. Early Transformer scaling giants like GPT-3 (2020) and Falcon-180B (2023) relied on the rectified linear unit function explicitly, while successors such as GPT-4 (2023) and Llama 3 (2024) utilized smoother variants like GELU or SwiGLU. These variants were used to improve training stability while fundamentally preserving the rectified principle of zeroing low responses. At the centre of modern artificial intelligence ReLU and its variants maintain absolute zero response across the bulk of the model at any one time, while maintaining approximately linear reponses for stimuli-relevant connections enabling high performance on each specific cognitive task. This feature of activation sparsity has been critical for massive scaling and performance gains of AI models right up to the present day. == Advantages == Advantages of ReLU include: Sparse activation: for example, in a randomly initialized network, only about 50% of hidden units are activated (i.e. have a non-zero output). Better gradient propagation: fewer vanishing gradient problems compared to sigmoidal activation functions that saturate in both directions. Efficiency: only requires comparison and addition. Scale-invariant (homogeneous, or "intensity equivariance"): max ( 0 , a x ) = a max ( 0 , x ) for a ≥ 0 {\displaystyle \max(0,ax)=a\max(0,x){\text{ for }}a\geq 0} . == Potential problems == Possible downsides can include: Non-differentiability at zero (however, it is differentiable anywhere else, and the value of the derivative at zero can be chosen to be 0 or 1 arbitrarily). Not zero-centered: ReLU outputs are always non-negative. This can make it harder for the network to learn during backpropagation, because gradient updates tend to push weights in one direction (positive or negative). Batch normalization can help address this. ReLU is unbounded. Redundancy of the parametrization: Because ReLU is scale-invariant, the network computes the exact same function by scaling the weights and biases in front of a ReLU activation by k {\displaystyle k} , and the weights after by 1 / k {\displaystyle 1/k} . Dying ReLU: ReLU neurons can sometimes be pushed into states

  Read more →
• 

  Detrended correspondence analysis

  Detrended correspondence analysis (DCA) is a multivariate statistical technique widely used by ecologists to find the main factors or gradients in large, species-rich but usually sparse data matrices that typify ecological community data. DCA is frequently used to suppress artifacts inherent in most other multivariate analyses when applied to gradient data. == History == DCA was created in 1979 by Mark Hill of the United Kingdom's Institute for Terrestrial Ecology (now merged into Centre for Ecology and Hydrology) and implemented in FORTRAN code package called DECORANA (Detrended Correspondence Analysis), a correspondence analysis method. DCA is sometimes erroneously referred to as DECORANA; however, DCA is the underlying algorithm, while DECORANA is a tool implementing it. == Issues addressed == According to Hill and Gauch, DCA suppresses two artifacts inherent in most other multivariate analyses when applied to gradient data. An example is a time-series of plant species colonising a new habitat; early successional species are replaced by mid-successional species, then by late successional ones (see example below). When such data are analysed by a standard ordination such as a correspondence analysis: the ordination scores of the samples will exhibit the 'edge effect', i.e. the variance of the scores at the beginning and the end of a regular succession of species will be considerably smaller than that in the middle, when presented as a graph the points will be seen to follow a horseshoe shaped curve rather than a straight line ('arch effect'), even though the process under analysis is a steady and continuous change that human intuition would prefer to see as a linear trend. Outside ecology, the same artifacts occur when gradient data are analysed (e.g. soil properties along a transect running between 2 different geologies, or behavioural data over the lifespan of an individual) because the curved projection is an accurate representation of the shape of the data in multivariate space. Ter Braak and Prentice (1987, p. 121) cite a simulation study analysing two-dimensional species packing models resulting in a better performance of DCA compared to CA. == Method == DCA is an iterative algorithm that has shown itself to be a highly reliable and useful tool for data exploration and summary in community ecology (Shaw 2003). It starts by running a standard ordination (CA or reciprocal averaging) on the data, to produce the initial horse-shoe curve in which the 1st ordination axis distorts into the 2nd axis. It then divides the first axis into segments (default = 26), and rescales each segment to have mean value of zero on the 2nd axis - this effectively squashes the curve flat. It also rescales the axis so that the ends are no longer compressed relative to the middle, so that 1 DCA unit approximates to the same rate of turnover all the way through the data: the rule of thumb is that 4 DCA units mean that there has been a total turnover in the community. Ter Braak and Prentice (1987, p. 122) warn against the non-linear rescaling of the axes due to robustness issues and recommend using detrending-by-polynomials only. == Drawbacks == No significance tests are available with DCA, although there is a constrained (canonical) version called DCCA in which the axes are forced by Multiple linear regression to correlate optimally with a linear combination of other (usually environmental) variables; this allows testing of a null model by Monte-Carlo permutation analysis. == Example == The example shows an ideal data set: The species data is in rows, samples in columns. For each sample along the gradient, a new species is introduced but another species is no longer present. The result is a sparse matrix. Ones indicate the presence of a species in a sample. Except at the edges each sample contains five species. The plot of the first two axes of the correspondence analysis result on the right hand side clearly shows the disadvantages of this procedure: the edge effect, i.e. the points are clustered at the edges of the first axis, and the arch effect. == Software == An open source implementation of DCA, based on the original FORTRAN code, is available in the vegan R-package.

  Read more →
• 

  Condensation algorithm

  The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran

  Read more →
• 

  Artificial development

  Artificial development, also known as artificial embryogeny or machine intelligence or computational development, is an area of computer science and engineering concerned with computational models motivated by genotype–phenotype mappings in biological systems. Artificial development is often considered a sub-field of evolutionary computation, although the principles of artificial development have also been used within stand-alone computational models. Within evolutionary computation, the need for artificial development techniques was motivated by the perceived lack of scalability and evolvability of direct solution encodings (Tufte, 2008). Artificial development entails indirect solution encoding. Rather than describing a solution directly, an indirect encoding describes (either explicitly or implicitly) the process by which a solution is constructed. Often, but not always, these indirect encodings are based upon biological principles of development such as morphogen gradients, cell division and cellular differentiation (e.g. Doursat 2008), gene regulatory networks (e.g. Guo et al., 2009), degeneracy (Whitacre et al., 2010), grammatical evolution (de Salabert et al., 2006), or analogous computational processes such as re-writing, iteration, and time. The influences of interaction with the environment, spatiality and physical constraints on differentiated multi-cellular development have been investigated more recently (e.g. Knabe et al. 2008). Artificial development approaches have been applied to a number of computational and design problems, including electronic circuit design (Miller and Banzhaf 2003), robotic controllers (e.g. Taylor 2004), and the design of physical structures (e.g. Hornby 2004).

  Read more →
• 

  Andrej Mrvar

  Andrej Mrvar is a Slovenian computer scientist and a professor at the University of Ljubljana's Faculty of Social Sciences. He is known for his work in network analysis, graph drawing, decision making, virtual reality, timing and data processing of sports competitions. == Education and career == He is well known for his work on Pajek, a free software for analysis and visualization of large networks. Mrvar began work on Pajek in 1996 with Vladimir Batagelj. His book Exploratory Social Network Analysis with Pajek, coauthored with Wouter de Nooy and Vladimir Batagelj, is his most cited work. It was published by Cambridge University Press in three editions (first 2005, second 2011, and third 2018). The book was translated into Japanese (2009) and Chinese (first edition 2012, second 2014). With Anuška Ferligoj, he was a founding co-editor-in-chief of the Metodološki zvezki - Advances in Methodology and Statistics journal. == Awards and honors == Vidmar Award (Faculty of Electrical and Computer Engineering, University of Ljubljana): 1988, 1990 First prizes for contributions (with Vladimir Batagelj) to Graph Drawing Contests in years: 1995, 1996, 1997, 1998, 1999, 2000 and 2005 / Graph Drawing Hall of Fame. Award of University of Ljubljana for contributions in education and research (Svečana listina Univerze v Ljubljani za pomembne dosežke na področju vzgojnoizobraževalnega in znanstvenoraziskovalega dela): 2001 The INSNA's William D. Richards Software award for work on Pajek (with Vladimir Batagelj): 2013 Award of Faculty of Social Sciences, University of Ljubljana for scientific excellence (Priznanje za znanstveno odličnost): 2013 == Selected publications == Wouter de Nooy, Andrej Mrvar, Vladimir Batagelj, Mark Granovetter (Series Editor), Exploratory Social Network Analysis with Pajek (Structural Analysis in the Social Sciences), Cambridge University Press (First Edition: 2005, Second Edition: 2011, Third Edition: 2018 ). Japanese Translation (2010). Chinese Translation (First Edition: 2012, Second Edition: 2014) Andrej Mrvar and Vladimir Batagelj, Analysis and visualization of large networks with program package Pajek. Complex Adaptive Systems Modeling, 4:6. SpringerOpen, 2016 Vladimir Batagelj and Andrej Mrvar, Some Analyses of Erdős Collaboration Graph, Social Networks, 22, 173–186, 2000 Vladimir Batagelj and Andrej Mrvar, A Subquadratic Triad Census Algorithm for Large Sparse Networks with Small Maximum Degree. Social Networks, 23, 237–243, 2001 Patrick Doreian and Andrej Mrvar, A Partitioning Approach to Structural Balance, Social Networks, 18, 149–168, 1996 Patrick Doreian and Andrej Mrvar, Partitioning Signed Social Networks, Social Networks, 31, 1–11, 2009 Andrej Mrvar and Patrick Doreian, Partitioning Signed Two-Mode Networks, Journal of Mathematical Sociology, 33, 196–221, 2009 Patrick Doreian and Andrej Mrvar, The international reach of the Koch brothers network. In: Antonyuk, A. and Basov, N. (Eds.): Networks in the Global World V. NetGloW 2020. Lecture Notes in Networks and Systems, 181, 225–235. Springer, 2021 Patrick Doreian and Andrej Mrvar, Delineating Changes in the Fundamental Structure of Signed Networks, Frontiers in Physics, 294, 1–11, 2021 Patrick Doreian and Andrej Mrvar, Hubs and Authorities in the Koch Brothers Network. Social Networks, Social Networks, 64, 148–157, 2021 Patrick Doreian and Andrej Mrvar, Public issues, policy proposals, social movements, and the interests of the Koch Brothers network of allies, Quality and Quantity, 56, 305–322, 2022 Douglas R. White, Vladimir Batagelj, Andrej Mrvar, Analyzing Large Kinship and Marriage Networks with Pgraph and Pajek. Social Science Computer Review, 17, 245–274, 1999 Ion Georgiou, Ronald Concer, Andrej Mrvar, A Systemic Approach to Sociometric Group Research: Advancing The Work of Leslie Day Zeleny, 1939–1947, Social Networks, 63, 174–200, 2020

  Read more →
• 

  Bayesian network

  A Bayesian network (also known as a Bayes network, Bayes net, belief network, or decision network) is a probabilistic graphical model that represents a set of variables and their conditional dependencies via a directed acyclic graph (DAG). While it is one of several forms of causal notation, causal networks are special cases of Bayesian networks. Bayesian networks are ideal for taking an event that occurred and predicting the likelihood that any one of several possible known causes was the contributing factor. For example, a Bayesian network could represent the probabilistic relationships between diseases and symptoms. Given symptoms, the network can be used to compute the probabilities of the presence of various diseases. Efficient algorithms can perform inference and learning in Bayesian networks. Bayesian networks that model sequences of variables (e.g. speech signals or protein sequences) are called dynamic Bayesian networks. Generalizations of Bayesian networks that can represent and solve decision problems under uncertainty are called influence diagrams. == Graphical model == Formally, Bayesian networks are directed acyclic graphs (DAGs) whose nodes represent variables in the Bayesian sense: they may be observable quantities, latent variables, unknown parameters or hypotheses. Each edge represents a direct conditional dependency. Any pair of nodes that are not connected (i.e. no path connects one node to the other) represent variables that are conditionally independent of each other. Each node is associated with a probability function that takes, as input, a particular set of values for the node's parent variables, and gives (as output) the probability (or probability distribution, if applicable) of the variable represented by the node. For example, if m {\displaystyle m} parent nodes represent m {\displaystyle m} Boolean variables, then the probability function could be represented by a table of 2 m {\displaystyle 2^{m}} entries, one entry for each of the 2 m {\displaystyle 2^{m}} possible parent combinations. Similar ideas may be applied to undirected, and possibly cyclic, graphs such as Markov networks. == Example == Suppose we want to model the dependencies between three variables: the sprinkler (or more appropriately, its state - whether it is on or not), the presence or absence of rain and whether the grass is wet or not. Observe that two events can cause the grass to become wet: an active sprinkler or rain. Rain has a direct effect on the use of the sprinkler (namely that when it rains, the sprinkler usually is not active). This situation can be modeled with a Bayesian network (shown to the right). Each variable has two possible values, T (for true) and F (for false). The joint probability function is, by the chain rule of probability, Pr ( G , S , R ) = Pr ( G ∣ S , R ) Pr ( S ∣ R ) Pr ( R ) {\displaystyle \Pr(G,S,R)=\Pr(G\mid S,R)\Pr(S\mid R)\Pr(R)} where G = "Grass wet (true/false)", S = "Sprinkler turned on (true/false)", and R = "Raining (true/false)". The model can answer questions about the presence of a cause given the presence of an effect (so-called inverse probability) like "What is the probability that it is raining, given the grass is wet?" by using the conditional probability formula and summing over all nuisance variables: Pr ( R = T ∣ G = T ) = Pr ( G = T , R = T ) Pr ( G = T ) = ∑ x ∈ { T , F } Pr ( G = T , S = x , R = T ) ∑ x , y ∈ { T , F } Pr ( G = T , S = x , R = y ) {\displaystyle \Pr(R=T\mid G=T)={\frac {\Pr(G=T,R=T)}{\Pr(G=T)}}={\frac {\sum _{x\in \{T,F\}}\Pr(G=T,S=x,R=T)}{\sum _{x,y\in \{T,F\}}\Pr(G=T,S=x,R=y)}}} Using the expansion for the joint probability function Pr ( G , S , R ) {\displaystyle \Pr(G,S,R)} and the conditional probabilities from the conditional probability tables (CPTs) stated in the diagram, one can evaluate each term in the sums in the numerator and denominator. For example, Pr ( G = T , S = T , R = T ) = Pr ( G = T ∣ S = T , R = T ) Pr ( S = T ∣ R = T ) Pr ( R = T ) = 0.99 × 0.01 × 0.2 = 0.00198. {\displaystyle {\begin{aligned}\Pr(G=T,S=T,R=T)&=\Pr(G=T\mid S=T,R=T)\Pr(S=T\mid R=T)\Pr(R=T)\\&=0.99\times 0.01\times 0.2\\&=0.00198.\end{aligned}}} Then the numerical results (subscripted by the associated variable values) are Pr ( R = T ∣ G = T ) = 0.00198 T T T + 0.1584 T F T 0.00198 T T T + 0.288 T T F + 0.1584 T F T + 0.0 T F F = 891 2491 ≈ 35.77 % . {\displaystyle \Pr(R=T\mid G=T)={\frac {0.00198_{TTT}+0.1584_{TFT}}{0.00198_{TTT}+0.288_{TTF}+0.1584_{TFT}+0.0_{TFF}}}={\frac {891}{2491}}\approx 35.77\%.} To answer an interventional question, such as "What is the probability that it would rain, given that we wet the grass?" the answer is governed by the post-intervention joint distribution function Pr ( S , R ∣ do ( G = T ) ) = Pr ( S ∣ R ) Pr ( R ) {\displaystyle \Pr(S,R\mid {\text{do}}(G=T))=\Pr(S\mid R)\Pr(R)} obtained by removing the factor Pr ( G ∣ S , R ) {\displaystyle \Pr(G\mid S,R)} from the pre-intervention distribution. The do operator forces the value of G to be true. The probability of rain is unaffected by the action: Pr ( R ∣ do ( G = T ) ) = Pr ( R ) . {\displaystyle \Pr(R\mid {\text{do}}(G=T))=\Pr(R).} To predict the impact of turning the sprinkler on: Pr ( R , G ∣ do ( S = T ) ) = Pr ( R ) Pr ( G ∣ R , S = T ) {\displaystyle \Pr(R,G\mid {\text{do}}(S=T))=\Pr(R)\Pr(G\mid R,S=T)} with the term Pr ( S = T ∣ R ) {\displaystyle \Pr(S=T\mid R)} removed, showing that the action affects the grass but not the rain. These predictions may not be feasible given unobserved variables, as in most policy evaluation problems. The effect of the action do ( x ) {\displaystyle {\text{do}}(x)} can still be predicted, however, whenever the back-door criterion is satisfied. It states that, if a set Z of nodes can be observed that d-separates (or blocks) all back-door paths from X to Y then Pr ( Y , Z ∣ do ( x ) ) = Pr ( Y , Z , X = x ) Pr ( X = x ∣ Z ) . {\displaystyle \Pr(Y,Z\mid {\text{do}}(x))={\frac {\Pr(Y,Z,X=x)}{\Pr(X=x\mid Z)}}.} A back-door path is one that ends with an arrow into X. Sets that satisfy the back-door criterion are called "sufficient" or "admissible." For example, the set Z = R is admissible for predicting the effect of S = T on G, because R d-separates the (only) back-door path S ← R → G. However, if S is not observed, no other set d-separates this path and the effect of turning the sprinkler on (S = T) on the grass (G) cannot be predicted from passive observations. In that case P(G | do(S = T)) is not "identified". This reflects the fact that, lacking interventional data, the observed dependence between S and G is due to a causal connection or is spurious (apparent dependence arising from a common cause, R). (see Simpson's paradox) To determine whether a causal relation is identified from an arbitrary Bayesian network with unobserved variables, one can use the three rules of "do-calculus" and test whether all do terms can be removed from the expression of that relation, thus confirming that the desired quantity is estimable from frequency data. Using a Bayesian network can save considerable amounts of memory over exhaustive probability tables, if the dependencies in the joint distribution are sparse. For example, a naive way of storing the conditional probabilities of 10 two-valued variables as a table requires storage space for 2 10 = 1024 {\displaystyle 2^{10}=1024} values. If no variable's local distribution depends on more than three parent variables, the Bayesian network representation stores at most 10 ⋅ 2 3 = 80 {\displaystyle 10\cdot 2^{3}=80} values. One advantage of Bayesian networks is that it is intuitively easier for a human to understand (a sparse set of) direct dependencies and local distributions than complete joint distributions. == Inference and learning == Bayesian networks perform three main inference tasks: Inferring unobserved variables Parameter learning for the probability distributions of each node in the network Structure learning of the graphical network === Inferring unobserved variables === Because a Bayesian network is a complete model for its variables and their relationships, it can be used to answer probabilistic queries about them. For example, the network can be used to update knowledge of the state of a subset of variables when other variables (the evidence variables) are observed. This process of computing the posterior distribution of variables given evidence is called probabilistic inference. The posterior gives a universal sufficient statistic for detection applications, when choosing values for the variable subset that minimize some expected loss function, for instance the probability of decision error. A Bayesian network can thus be considered a mechanism for automatically applying Bayes' theorem to complex problems. The most common exact inference methods are: variable elimination, which eliminates (by integration or summation) the non-observed non-query variables one by one by distributing the sum over the prod

  Read more →
• 

  VideoPoet

  VideoPoet is a large language model developed by Google Research in 2023 for video making. It can be asked to animate still images. The model accepts text, images, and videos as inputs, with a program to add feature for any input to any format generated content. VideoPoet was publicly announced on December 19, 2023. It uses an autoregressive language model.

  Read more →
• 

  Non-negative matrix factorization

  Non-negative matrix factorization (NMF or NNMF), also non-negative matrix approximation is a group of algorithms in multivariate analysis and linear algebra where a matrix V is factorized into (usually) two matrices W and H, with the property that all three matrices have no negative elements. This non-negativity makes the resulting matrices easier to inspect. Also, in applications such as processing of audio spectrograms or muscular activity, non-negativity is inherent to the data being considered. Since the problem is not exactly solvable in general, it is commonly approximated numerically. NMF finds applications in such fields as astronomy, computer vision, document clustering, missing data imputation, chemometrics, audio signal processing, recommender systems, and bioinformatics. == History == In chemometrics non-negative matrix factorization has a long history under the name "self modeling curve resolution". In this framework the vectors in the right matrix are continuous curves rather than discrete vectors. Also early work on non-negative matrix factorizations was performed by a Finnish group of researchers in the 1990s under the name positive matrix factorization. It became more widely known as non-negative matrix factorization after Lee and Seung investigated the properties of the algorithm and published some simple and useful algorithms for two types of factorizations. == Background == Let matrix V be the product of the matrices W and H, V = W H . {\displaystyle \mathbf {V} =\mathbf {W} \mathbf {H} \,.} Matrix multiplication can be implemented as computing the column vectors of V as linear combinations of the column vectors in W using coefficients supplied by columns of H. That is, each column of V can be computed as follows: v i = W h i , {\displaystyle \mathbf {v} _{i}=\mathbf {W} \mathbf {h} _{i}\,,} where vi is the i-th column vector of the product matrix V and hi is the i-th column vector of the matrix H. When multiplying matrices, the dimensions of the factor matrices may be significantly lower than those of the product matrix and it is this property that forms the basis of NMF. NMF generates factors with significantly reduced dimensions compared to the original matrix. For example, if V is an m × n matrix, W is an m × p matrix, and H is a p × n matrix then p can be significantly less than both m and n. Here is an example based on a text-mining application: Let the input matrix (the matrix to be factored) be V with 10000 rows and 500 columns where words are in rows and documents are in columns. That is, we have 500 documents indexed by 10000 words. It follows that a column vector v in V represents a document. Assume we ask the algorithm to find 10 features in order to generate a features matrix W with 10000 rows and 10 columns and a coefficients matrix H with 10 rows and 500 columns. The product of W and H is a matrix with 10000 rows and 500 columns, the same shape as the input matrix V and, if the factorization worked, it is a reasonable approximation to the input matrix V. From the treatment of matrix multiplication above it follows that each column in the product matrix WH is a linear combination of the 10 column vectors in the features matrix W with coefficients supplied by the coefficients matrix H. This last point is the basis of NMF because we can consider each original document in our example as being built from a small set of hidden features. NMF generates these features. It is useful to think of each feature (column vector) in the features matrix W as a document archetype comprising a set of words where each word's cell value defines the word's rank in the feature: The higher a word's cell value the higher the word's rank in the feature. A column in the coefficients matrix H represents an original document with a cell value defining the document's rank for a feature. We can now reconstruct a document (column vector) from our input matrix by a linear combination of our features (column vectors in W) where each feature is weighted by the feature's cell value from the document's column in H. == Clustering property == NMF has an inherent clustering property, i.e., it automatically clusters the columns of input data V = ( v 1 , … , v n ) {\displaystyle \mathbf {V} =(v_{1},\dots ,v_{n})} . More specifically, the approximation of V {\displaystyle \mathbf {V} } by V ≃ W H {\displaystyle \mathbf {V} \simeq \mathbf {W} \mathbf {H} } is achieved by finding W {\displaystyle W} and H {\displaystyle H} that minimize the error function (using the Frobenius norm) ‖ V − W H ‖ F , {\displaystyle \left\|V-WH\right\|_{F},} subject to W ≥ 0 , H ≥ 0. {\displaystyle W\geq 0,H\geq 0.} , If we furthermore impose an orthogonality constraint on H {\displaystyle \mathbf {H} } , i.e. H H T = I {\displaystyle \mathbf {H} \mathbf {H} ^{T}=I} , then the above minimization is mathematically equivalent to the minimization of K-means clustering. Furthermore, the computed H {\displaystyle H} gives the cluster membership, i.e., if H k j > H i j {\displaystyle \mathbf {H} _{kj}>\mathbf {H} _{ij}} for all i ≠ k, this suggests that the input data v j {\displaystyle v_{j}} belongs to k {\displaystyle k} -th cluster. The computed W {\displaystyle W} gives the cluster centroids, i.e., the k {\displaystyle k} -th column gives the cluster centroid of k {\displaystyle k} -th cluster. This centroid's representation can be significantly enhanced by convex NMF. When the orthogonality constraint H H T = I {\displaystyle \mathbf {H} \mathbf {H} ^{T}=I} is not explicitly imposed, the orthogonality holds to a large extent, and the clustering property holds too. When the error function to be used is Kullback–Leibler divergence, NMF is identical to the probabilistic latent semantic analysis (PLSA), a popular document clustering method. == Types == === Approximate non-negative matrix factorization === Usually the number of columns of W and the number of rows of H in NMF are selected so the product WH will become an approximation to V. The full decomposition of V then amounts to the two non-negative matrices W and H as well as a residual U, such that: V = WH + U. The elements of the residual matrix can either be negative or positive. When W and H are smaller than V they become easier to store and manipulate. Another reason for factorizing V into smaller matrices W and H, is that if one's goal is to approximately represent the elements of V by significantly less data, then one has to infer some latent structure in the data. === Convex non-negative matrix factorization === In standard NMF, matrix factor W ∈ R+m × k， i.e., W can be anything in that space. Convex NMF restricts the columns of W to convex combinations of the input data vectors ( v 1 , … , v n ) {\displaystyle (v_{1},\dots ,v_{n})} . This greatly improves the quality of data representation of W. Furthermore, the resulting matrix factor H becomes more sparse and orthogonal. === Nonnegative rank factorization === In case the nonnegative rank of V is equal to its actual rank, V = WH is called a nonnegative rank factorization (NRF). The problem of finding the NRF of V, if it exists, is known to be NP-hard. === Different cost functions and regularizations === There are different types of non-negative matrix factorizations. The different types arise from using different cost functions for measuring the divergence between V and WH and possibly by regularization of the W and/or H matrices. Two simple divergence functions studied by Lee and Seung are the squared error (or Frobenius norm) and an extension of the Kullback–Leibler divergence to positive matrices (the original Kullback–Leibler divergence is defined on probability distributions). Each divergence leads to a different NMF algorithm, usually minimizing the divergence using iterative update rules. The factorization problem in the squared error version of NMF may be stated as: Given a matrix V {\displaystyle \mathbf {V} } find nonnegative matrices W and H that minimize the function F ( W , H ) = ‖ V − W H ‖ F 2 {\displaystyle F(\mathbf {W} ,\mathbf {H} )=\left\|\mathbf {V} -\mathbf {WH} \right\|_{F}^{2}} Another type of NMF for images is based on the total variation norm. When L1 regularization (akin to Lasso) is added to NMF with the mean squared error cost function, the resulting problem may be called non-negative sparse coding due to the similarity to the sparse coding problem, although it may also still be referred to as NMF. === Online NMF === Many standard NMF algorithms analyze all the data together; i.e., the whole matrix is available from the start. This may be unsatisfactory in applications where there are too many data to fit into memory or where the data are provided in streaming fashion. One such use is for collaborative filtering in recommendation systems, where there may be many users and many items to recommend, and it would be inefficient to recalculate everything when one user or one item is added to the system. The cost function for o

  Read more →
• 

  (1+ε)-approximate nearest neighbor search

  (1+ε)-approximate nearest neighbor search is a variant of the nearest neighbor search problem. A solution to the (1+ε)-approximate nearest neighbor search is a point or multiple points within distance (1+ε) R from a query point, where R is the distance between the query point and its true nearest neighbor. Reasons to approximate nearest neighbor search include the space and time costs of exact solutions in high-dimensional spaces (see curse of dimensionality) and that in some domains, finding an approximate nearest neighbor is an acceptable solution. Approaches for solving (1+ε)-approximate nearest neighbor search include k-d trees, locality-sensitive hashing and brute-force search.

  Read more →