AI Code Programming

AI Code Programming — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Software design

Software design is the process of conceptualizing how a software system will work before it is implemented or modified. Software design also refers to the direct result of the design process – the concepts of how the software will work which may be formally documented or may be maintained less formally, including via oral tradition. The design process enables a designer to model aspects of a software system before it exists with the intent of making the effort of writing the code more efficiently. Creativity, past experience, a sense of what makes "good" software, and a commitment to quality are success factors for a competent design. A software design can be compared to an architected plan for a house. High-level plans represent the totality of the house (e.g., a three-dimensional rendering of the house). Lower-level plans provide guidance for constructing each detail (e.g., the plumbing lay). Similarly, the software design model provides a variety of views of the proposed software solution. == Part of the overall process == In terms of the waterfall development process, software design is the activity that occurs after requirements analysis and before coding. Requirements analysis determines what the system needs to do without determining how it will do it, and thus, multiple designs can be imagined that satisfy the requirements. The design can be created while coding, without a plan or requirements analysis, but for more complex projects this is less feasible. Completing a design prior to coding allows for multidisciplinary designers and subject-matter experts to collaborate with programmers to produce software that is useful and technically sound. Sometimes, a simulation or prototype is created to model the system in an effort to determine a valid and good design. == Code as design == A common point of confusion with the term design in software is that the process applies at multiple levels of abstraction such as a high-level software architecture and lower-level components, functions and algorithms. A relatively formal process may occur at high levels of abstraction but at lower levels, the design process is almost always less formal where the only artifact of design may be the code itself. To the extent that this is true, software design refers to the design of the design. Edsger W. Dijkstra referred to this layering of semantic levels as the "radical novelty" of computer programming, and Donald Knuth used his experience writing TeX to describe the futility of attempting to design a program prior to implementing it: TEX would have been a complete failure if I had merely specified it and not participated fully in its initial implementation. The process of implementation constantly led me to unanticipated questions and to new insights about how the original specifications could be improved. == Artifacts == A design process may include the production of art Software design documentation such as flow chart, use case, Pseudocode, Unified Modeling Language model and other Fundamental modeling concepts. For user centered software, design may involve user experience design yielding a storyboard to help determine those specifications. Documentation may be reviewed to allow constraints, specifications and even requirements to be adjusted prior to coding. == Iterative design == Software systems inherently deal with uncertainties, and the size of software components can significantly influence a system's outcomes, both positively and negatively. Neal Ford and Mark Richards propose an iterative approach to address the challenge of identifying and right-sizing components. This method emphasizes continuous refinement as teams develop a more nuanced understanding of system behavior and requirements. The approach typically involves a cycle with several stages: A high-level partitioning strategy is established, often categorized as technical or domain-based. Guidelines for the smallest meaningful deployable unit, referred to as "quanta," are defined. While these foundational decisions are made early, they may be revisited later in the cycle if necessary. Initial components are identified based on the established strategy. Requirements are assigned to the identified components. The roles and responsibilities of each component are analyzed to ensure clarity and minimize overlap. Architectural characteristics, such as scalability, fault tolerance, and maintainability, are evaluated. Components may be restructured based on feedback from development teams. This cycle serves as a general framework and can be adapted to different domains. == Design principles == Design principles enable a software engineer to navigate the design process. Davis suggested principles which have been refined over time as: The design process should not suffer from "tunnel vision" A good designer should consider alternative approaches, judging each based on the requirements of the problem, the resources available to do the job. The design should be traceable to the analysis model Because a single element of the design model can often be traced back to multiple requirements, it is necessary to have a means for tracking how requirements have been satisfied by the design model. The design should not reinvent the wheel Systems are constructed using a set of design patterns, many of which have likely been encountered before. These patterns should always be chosen as an alternative to reinvention. Time is short and resources are limited; design time should be invested in representing (truly new) ideas by integrating patterns that already exist (when applicable). The design should "minimize the intellectual distance" between the software and the problem as it exists in the real world That is, the structure of the software design should, whenever possible, mimic the structure of the problem domain. The design should exhibit uniformity and integration A design is uniform if it appears fully coherent. In order to achieve this outcome, rules of style and format should be defined for a design team before design work begins. A design is integrated if care is taken in defining interfaces between design components. The design should be structured to accommodate change The design concepts discussed in the next section enable a design to achieve this principle. The design should be structured to degrade gently, even when aberrant data, events, or operating conditions are encountered Well-designed software should never "bomb"; it should be designed to accommodate unusual circumstances, and if it must terminate processing, it should do so in a graceful manner. Design is not coding, coding is not design Even when detailed procedural designs are created for program components, the level of abstraction of the design model is higher than the source code. The only design decisions made at the coding level should address the small implementation details that enable the procedural design to be coded. The design should be assessed for quality as it is being created, not after the fact A variety of design concepts and design measures are available to assist the designer in assessing quality throughout the development process. The design should be reviewed to minimize conceptual (semantic) errors There is sometimes a tendency to focus on minutiae when the design is reviewed, missing the forest for the trees. A design team should ensure that major conceptual elements of the design (omissions, ambiguity, inconsistency) have been addressed before worrying about the syntax of the design model. == Design concepts == Design concepts provide a designer with a foundation from which more sophisticated methods can be applied. Design concepts include: Abstraction Reducing the information content of a concept or an observable phenomenon, typically to retain only information that is relevant for a particular purpose. It is an act of Representing essential features without including the background details or explanations. Architecture The overall structure of the software and the ways in which that structure provides conceptual integrity for a system. Good software architecture will yield a good return on investment with respect to the desired outcome of the project, e.g. in terms of performance, quality, schedule and cost. Control hierarchy A program structure that represents the organization of a program component and implies a hierarchy of control. Data structure Representing the logical relationship between elements of data. Design pattern A designer may identify a design aspect of the system that has solved in the past. The reuse of such patterns can increase software development velocity. Information hiding Modules should be specified and designed so that information contained within a module is inaccessible to other modules that have no need for such information. Modularity Dividing the solution into parts (modules). Refinement The process of elaboration. A hierarchy is developed by decomposing a macrosco
Read more →
Government Secure Intranet

Government Secure Intranet (GSi) was a United Kingdom government wide area network, whose main purpose was to enable connected organisations to communicate electronically and securely at low protective marking levels. It was known for the '.gsi.gov.uk' family of domains for government email. Migration away from these domains began in 2019 and was completed in 2023. == History == === Use === Many UK government organisations used the GSi to transfer files on a peer-to-peer (P2P) basis between similarly accredited networks. The network itself was open within the context of its accreditation – it imposed no restrictions on traffic types carried across the network, restrictions and policy control were left to the connecting departments. Email traffic in and out of the network was filtered by an external provider. === Origin === The concept of GSi was defined by the Cabinet Office, and was turned into practical reality by the Internet Special Products group of Cable & Wireless (then known as Mercury Communications) at their Brentford premises. GSi development started late 1996, and can be roughly dated by checking the registration date of its first domain name, 'gsi.net', registered 30 May 1997. The formal go-live date was several months later (according to the Central Computer and Telecommunications Agency (CCTA) this was February 1998). The main drivers behind the development of GSi was the plethora of inter-agency connections in UK government which made managing security and connectivity budgets problematic. GSi not only provided better oversight, it also normalised connectivity. GSi was designed as an accredited, dual link connected Internet Protocol backbone, it imposed no restrictions on what type of traffic it carried; any restrictions were considered a policy decision for each connecting department. The design of GSi partly supported the then developing eGIF interoperability standards. This was a direct consequence of the two key technical people driving the project, one from Cable & Wireless, one from the UK government in the form of the CCTA. GSi used SMTP as mail transport protocol, and the conversion from the then prevalent X.400 email facilities to SMTP proved for many departments an improvement in reliability and speed. In the case of X.400, this conversion also cut email costs substantially as X.400 message conversions were still chargeable even if the conversion failed due to message size. In some cases, the ROI of such an email conversion was as short as two months. The creation of GSi handed Cable & Wireless a monopoly on UK government data connectivity. GSi can be considered one of the more successful UK government IT projects from the point of view of take up - even when still in pilot phase, demand increased to a point where service windows had to be imposed to continue building the platform to full strength. The development of GSi was also the root of the creation of the CESG Listed Adviser Scheme (CLAS). During the build of GSi, the need for accredited advisers became clear as advice on connectivity invariably involved discussing government confidential matters. CESG eventually responded with the above CLAS scheme. === Operations contract === GSi was operated on a five-year renewable contract basis. Energis won this contract from Cable & Wireless in August 2003. Cable & Wireless then bought Energis in 2005, thus regaining control over the platform. Cable and Wireless Worldwide won the GSi Convergence Framework (GCF) contract in 2011. The GSi and Managed Telecommunications Service (MTS) framework agreements finished in August 2011 with contracts running on to 12 February 2012. GCF is intended to facilitate the migration to the Public Services Network. === Previous developments === Government Connect went live across local authorities in England and Wales. Government Connect is a pan-government programme providing an accredited and secure network between central government and every local authority in England and Wales and allows exchange of RESTRICTED information between authorities. The GCSX network is part of the wider GSi and provides connectivity to nearly all central departments. Scottish local authorities have already established a similar network known as the Government Secure Extranet (GSX). Local authorities with a GCSX connection can now use a GCSX email account to exchange sensitive data, including DWP benefits data, patient identifiable data, with health sector staff who have a NHS.net email address, e.g. PCT staff and GPs. As both GCSX and the Police National Network (PNN) are both connected to the wider Government Secure Intranet (GSi), data can be transferred securely between local authorities and the Police. GC Mail can be used now to replace the existing less efficient and less secure methods of exchanging data between local authorities and the Police. Local authorities that deliver Housing and Council Tax benefits are taking part in the e-Transfers programme, which is e-enabling the process for delivery of Local Authority Input Documents (LAIDs) and Local Authority Claim Information (LACIs). Version 4.1 of the Code of Connection for compliance was introduced in 2010. Compared with version 3.2 the main Code of Connection version 4.1 areas of are: Mobile working - full implementation of compliant service Firewall specification (EAL 4) Execution of unauthorised software Requirement for IT Healthchecks (CHECK / CREST / TigerScheme) Labelling e-mails with protective markings. == Public Services Network == The Public Services Network is a UK Government programme that unified the provision of network infrastructure across the United Kingdom public sector into an interconnected "network of networks". This included large elements of GSi. It is now a legacy network. Centrally procured public sector networks migrated across to the PSN framework as they reached the end of their contract terms, either through an interim framework or directly. The Government Secure Intranet (GSi) contracts expired in September 2011, running on to 12 February 2012 and were replaced by the transitional Government Secure Intranet Convergence Framework (GCF).
Read more →
Ciphertext expansion

In cryptography, the term ciphertext expansion refers to the length increase of a message when it is encrypted. Many modern cryptosystems cause some degree of expansion during the encryption process, for instance when the resulting ciphertext must include a message-unique Initialization Vector (IV). Probabilistic encryption schemes cause ciphertext expansion, as the set of possible ciphertexts is necessarily greater than the set of input plaintexts. Certain schemes, such as Cocks Identity Based Encryption, or the Goldwasser-Micali cryptosystem result in ciphertexts hundreds or thousands of times longer than the plaintext. Ciphertext expansion may be offset or increased by other processes which compress or expand the message, e.g., data compression or error correction coding. == Reasons why Ciphertext expansion can occur == === Probabilistic Encryption === Probabilistic encryption schemes, such as the Goldwasser-Micali cryptosystem, necessarily produce ciphertexts that are longer than the original plaintexts. This is because the set of possible ciphertexts must be larger than the set of plaintexts to achieve semantic security. === Initialization Vectors (IVs) === Many block cipher modes of operation, like Cipher Block Chaining (CBC), require the use of an Initialization Vector (IV) that is unique for each message. The IV is typically appended to the ciphertext, resulting in expansion. === Redundancy and Error Correction === Some cryptographic schemes intentionally introduce redundancy or error correction codes into the ciphertext to protect against tampering or transmission errors. This added data increases the ciphertext size. === Specific Cryptosystems === Certain cryptographic schemes, such as Cocks Identity-Based Encryption, can produce ciphertexts that are hundreds or thousands of times longer than the original plaintext. This extreme expansion is a design choice to achieve the desired security properties. Ciphertext expansion can be offset or increased by other processes that compress or expand the message, such as data compression or error correction coding. The overall impact on message size depends on the relative strengths of these competing effects.
Read more →
Data storage

Data storage is the recording (storing) of information (data) in a storage medium. Handwriting, phonographic recording, magnetic tape, and optical discs are all examples of storage media. Biological molecules such as RNA and DNA are considered by some as data storage. Recording may be accomplished with virtually any form of energy. Electronic data storage requires electrical power to store and retrieve data. Data stored in a digital, machine-readable medium is called digital data. Computer data storage is one of the core functions of a general-purpose computer. Electronic documents can be stored in much less space than paper documents. Barcodes and magnetic ink character recognition (MICR) are two ways of recording machine-readable data on paper. == Recording media == A recording medium is physical material that holds information. Newly created information is distributed and can be stored in four storage media–print, film, magnetic, and optical–and seen or heard in four information flows–telephone, radio, TV, and the Internet as well as being observed directly. Digital information is stored on electronic media in many different recording formats. With electronic media, the data and the recording media are sometimes referred to as "software" despite the more common use of the word to describe computer software. With (traditional art) static media, art materials such as crayons may be considered both equipment and medium as the wax, charcoal or chalk material from the equipment becomes part of the surface of the medium. Some recording media may be temporary, either by design or by nature. Volatile organic compounds may be used to purposely make data expire over time or to reduce environmental impact. Data such as smoke signals or skywriting are temporary by nature. Depending on the volatility, a gas (e.g., atmosphere, smoke) or a liquid surface such as a lake would be considered a temporary recording medium, if it could be considered a recording medium at all. == Global capacity, digitization, and trends == A 2003 UC Berkeley report estimated that about five exabytes of new information were produced in 2002 and that 92% of this data was stored on magnetic media (primarily hard disk drives). This was about twice the data produced in 1999. The amount of data transmitted over telecommunications systems in 2002 was nearly 18 exabytes—three and a half times more than was recorded on non-volatile storage. Telephone calls constituted 98% of the telecommunicated information in 2002. The researchers' highest estimate for the growth rate of newly stored information (uncompressed) was more than 30% per year. In a more limited study, the International Data Corporation estimated that the total amount of digital data in 2007 was 281 exabytes and that the total amount of digital data produced exceeded the global storage capacity for the first time. A 2011 article in Science estimated that the year 2002 was the beginning of the digital age for information storage: an age in which more information is stored on digital storage devices than on analog storage devices. In 1986, approximately 1% of the world's capacity to store information was in digital format; this grew to 3% by 1993, to 25% by 2000, and to 94% by 2007. These figures correspond to less than three compressed exabytes in 1986, and 295 compressed exabytes in 2007. The quantity of digital storage doubled roughly every three to four years. It is estimated that around 120 zettabytes of data will be generated in 2023, an increase of 60x from 2010, and that it will increase to 181 zettabytes generated in 2025. == Mass storage ==
Read more →
Condensation algorithm

The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran
Read more →
Business intelligence

Business intelligence (BI) consists of strategies, methodologies, and technologies used by enterprises for data analysis and management of business information to inform business strategies and business operations. Common functions of BI technologies include reporting, online analytical processing, analytics, dashboard development, data mining, process mining, complex event processing, business performance management, benchmarking, text mining, predictive analytics, and prescriptive analytics. BI tools can handle large amounts of structured and sometimes unstructured data to help organizations identify, develop, and otherwise create new strategic business opportunities. They aim to allow for the easy interpretation of these big data. Identifying new opportunities and implementing an effective strategy based on insights is assumed to potentially provide businesses with a competitive market advantage and long-term stability, and help them take strategic decisions. Business intelligence can be used by enterprises to support a wide range of business decisions ranging from operational to strategic. Basic operating decisions include product positioning or pricing. Strategic business decisions involve priorities, goals, and directions at the broadest level. In all cases, business intelligence is considered most effective when it combines data from the market in which a company operates (external data) with data from internal company sources, such as financial and operational information. When integrated, external and internal data provide a comprehensive view that creates ‘intelligence’ not possible from any single data source alone. Among their many uses, business intelligence tools empower organizations to gain insight into new markets, to assess demand and suitability of products and services for different market segments, and to gauge the impact of marketing efforts. BI applications use data gathered from a data warehouse (DW) or from a data mart, and the concepts of BI and DW combine as "BI/DW" or as "BIDW". A data warehouse contains a copy of analytical data that facilitates decision support. == History == The earliest known use of the term business intelligence is in Richard Millar Devens' Cyclopædia of Commercial and Business Anecdotes (1865). Devens used the term to describe how the banker Sir Henry Furnese gained profit by receiving and acting upon information about his environment, prior to his competitors: Throughout Holland, Flanders, France, and Germany, he maintained a complete and perfect train of business intelligence. The news of the many battles fought was thus received first by him, and the fall of Namur added to his profits, owing to his early receipt of the news. The ability to collect and react accordingly based on the information retrieved, Devens says, is central to business intelligence. When Hans Peter Luhn, a researcher at IBM, used the term business intelligence in an article published in 1958, he employed the Webster's Dictionary definition of intelligence: "the ability to apprehend the interrelationships of presented facts in such a way as to guide action towards a desired goal." In 1989, Howard Dresner (later a Gartner analyst) proposed business intelligence as an umbrella term to describe "concepts and methods to improve business decision making by using fact-based support systems." It was not until the late 1990s that this usage was widespread. == Definition == According to Solomon Negash and Paul Gray, business intelligence (BI) can be defined as systems that combine: Data gathering Data storage Knowledge management with analysis to evaluate complex corporate and competitive information for presentation to planners and decision makers, with the objective of improving the timeliness and the quality of the input to the decision process." According to Forrester Research, business intelligence is "a set of methodologies, processes, architectures, and technologies that transform raw data into meaningful and useful information used to enable more effective strategic, tactical, and operational insights and decision-making." Under this definition, business intelligence encompasses information management (data integration, data quality, data warehousing, master-data management, text- and content-analytics, et al.). Therefore, Forrester refers to data preparation and data usage as two separate but closely linked segments of the business-intelligence architectural stack. Some elements of business intelligence are: Multidimensional aggregation and allocation Denormalization, tagging, and standardization Realtime reporting with analytical alert A method of interfacing with unstructured data sources Group consolidation, budgeting, and rolling forecasts Statistical inference and probabilistic simulation Key performance indicators optimization Version control and process management Open item management Forrester distinguishes this from the business-intelligence market, which is "just the top layers of the BI architectural stack, such as reporting, analytics, and dashboards." === Compared with competitive intelligence === Though the term business intelligence is sometimes a synonym for competitive intelligence (because they both support decision making), BI uses technologies, processes, and applications to analyze mostly internal, structured data and business processes while competitive intelligence gathers, analyzes, and disseminates information with a topical focus on company competitors. If understood broadly, competitive intelligence can be considered as a subset of business intelligence. === Compared with business analytics === Business intelligence and business analytics are sometimes used interchangeably, but there are alternate definitions. Thomas Davenport, professor of information technology and management at Babson College argues that business intelligence should be divided into querying, reporting, Online analytical processing (OLAP), an "alerts" tool, and business analytics. In this definition, business analytics is the subset of BI focusing on statistics, prediction, and optimization, rather than the reporting functionality. == Unstructured data == Business operations can generate a very large amount of data in the form of emails, memos, notes from call centers, news, user groups, chats, reports, web pages, presentations, image files, video files, and marketing material. According to Merrill Lynch, more than 85% of all business information exists in these forms; a company might only use such a document a single time. Because of the way it is produced and stored, this information is either unstructured or semi-structured. The management of semi-structured data is an unsolved problem in the information technology industry. According to projections from Gartner (2003), white-collar workers spend 30–40% of their time searching, finding, and assessing unstructured data. BI uses both structured and unstructured data. The former is easy to search, and the latter contains a large quantity of the information needed for analysis and decision-making. Because of the difficulty of properly searching, finding, and assessing unstructured or semi-structured data, organizations may not draw upon these vast reservoirs of information, which could influence a particular decision, task, or project. This can ultimately lead to poorly informed decision-making. Therefore, when designing a business intelligence/DW solution, the specific problems associated with semi-structured and unstructured data must be accommodated, as well as those associated with structured data. === Limitations of semi-structured and unstructured data === There are several challenges to developing BI with semi-structured data. According to Inmon & Nesavich, some of those are: Physically accessing unstructured textual data – unstructured data is stored in a huge variety of formats. Terminology – Among researchers and analysts, there is a need to develop standardized terminology. Volume of data – As stated earlier, up to 85% of all data exists as semi-structured data. Couple that with the need for word-to-word and semantic analysis. Searchability of unstructured textual data – A simple search on some data, e.g. apple, results in links where there is a reference to that precise search term. (Inmon & Nesavich, 2008) gives an example: "a search is made on the term felony. In a simple search, the term felony is used, and everywhere there is a reference to felony, a hit to an unstructured document is made. But a simple search is crude. It does not find references to crime, arson, murder, embezzlement, vehicular homicide, and such, even though these crimes are types of felonies". === Metadata === To solve problems with searchability and assessment of data, it is necessary to know something about the content. This can be done by adding context through the use of metadata. Many systems already capture some metadata (e.g. filename, author, size, etc.), but more usef
Read more →
Cryptographic bill of materials

Cryptographic bill of materials (CBOM—also cryptography bill of materials) is a structured inventory of all cryptographic assets present in a software, firmware, device, or system. It enumerates algorithms (and parameters such as key sizes and modes), cryptographic libraries or modules, digital certificates, keys and related material, and protocols in use, and maps their relationships to the components that implement or invoke them. CBOMs are used to improve security analysis, compliance, and cryptographic agility, and are increasingly referenced in guidance for post‑quantum cryptography (PQC) migration. == Definition and scope == A CBOM inventories cryptographic primitives and materials—such as encryption and signature algorithms (with specific variants and modes), key sizes, cryptographic libraries/modules, digital certificates (e.g., X.509), keys and other related cryptographic material, and security protocols (e.g., TLS, IPsec). It also documents dependencies (for example, an application uses an algorithm provided by a library; a protocol uses several algorithms) and can capture certificate lifecycles, cryptographic module certifications (e.g., FIPS 140‑3), and policy conformance metadata. In common practice, a CBOM may be embedded within an SBOM format (such as CycloneDX) or exported as a separate, linked artifact. === Typical CBOM fields === The exact schema varies by implementation, but common fields are summarized below (see CycloneDX CBOM guide and NIST SP 1800‑38B). == Relation to SBOM == A CBOM is complementary to, but distinct from, a software bill of materials (SBOM). Whereas an SBOM lists software components and their versions, a CBOM focuses specifically on the cryptography present and how it is configured and used. For example, an SBOM might enumerate inclusion of a library such as OpenSSL, while the CBOM would identify which algorithms and parameters that library enables (e.g., RSA‑2048, ECDH P‑256, AES‑GCM) and list relevant keys and certificates. The pairing enables both supply‑chain transparency and cryptographic transparency. == History == The term and practice emerged in the early–mid 2020s alongside software‑supply‑chain transparency and PQC planning. The OWASP CycloneDX standard introduced native CBOM support (v1.6 and later), modeling algorithms, keys, certificates, and protocols as first‑class “cryptographic assets” and providing dependency semantics (uses/implements) between software and cryptography. Open tooling from industry and researchers (e.g., IBM's CBOMkit and related generators/viewers) appeared to automate discovery and representation of cryptographic use in the CycloneDX CBOM schema. == Regulatory and policy context == In the United States, policy has emphasized cryptographic inventories as a prerequisite to PQC migration. The White House's National Security Memorandum 10 (2022) directed a government‑wide transition to quantum‑resistant cryptography; the Office of Management and Budget's M‑23‑02 (November 2022) operationalized this by requiring agencies to submit a prioritized inventory of cryptographic systems (with algorithm and key details) by 4 May 2023 and annually thereafter, and tasked CISA/NSA/NIST to develop automated discovery and inventory strategies. A 2024 Office of the National Cyber Director report reiterated that a “comprehensive cryptographic inventory” is the baseline for PQC planning and must be maintained iteratively with both automated and manual discovery. NIST's NCCoE practice guide (SP 1800‑38B, preliminary draft) provides concrete methods for cryptographic discovery and documentation across enterprises, aligning with CBOM‑style representations. CISA later published a strategy to migrate federal agencies to automated cryptography discovery and inventory tools to support continuous reporting. Separately, NSA, CISA, and NIST issued joint guidance encouraging all organisations to prepare cryptographic inventories and roadmaps for PQC, beyond government environments. == Role in quantum readiness and cryptographic agility == Because large‑scale quantum computing threatens widely used public‑key algorithms (e.g., RSA, ECC), organisations are planning multi‑year transitions to post-quantum cryptography. CBOMs enable that planning by identifying where quantum‑vulnerable algorithms appear, prioritising high‑impact systems, and tracking replacements over time. A machine‑readable CBOM also supports cryptographic agility and incident response: if an algorithm, library, or certificate lifecycle becomes non‑compliant or vulnerable, the CBOM indicates which products and systems are affected and where mitigations must be applied first. == Standards and tooling == CycloneDX (OWASP): Native CBOM modelling (v1.6+) for algorithms, certificates, keys/related material, and protocols, with dependency semantics and examples. The project publishes a CBOM guide and use‑case profiles (e.g., certificate and algorithm inventories). NIST NCCoE SP 1800‑38 series: Practice guides for PQC migration include enterprise cryptographic discovery methods that produce CBOM‑like inventories and integrate multiple discovery tools. Government automation initiatives: Following M‑23‑02, CISA issued a strategy to migrate to automated cryptography discovery and inventory tools to support agency reporting and continuous inventory management. Open‑source and vendor tools: IBM's CBOMkit and related components generate, analyse, and visualise CBOMs; the IBM CBOM specification work was upstreamed into CycloneDX 1.6. === Data model and interchange (example) === CycloneDX provides machine‑readable encodings (JSON/XML) for CBOM content. The example below (subset) shows an application depending on a crypto library that provides the AES‑256‑GCM algorithm, and the application also depends on a leaf X.509 certificate. See the CycloneDX CBOM guide, JSON reference, and the “Implementation details” use‑case for the semantics of `dependsOn` and `provides`. == Relationship to cybersecurity supply chain initiatives == CBOMs complement SBOM‑focused supply‑chain transparency introduced by U.S. Executive Order 14028 and NTIA/NIST SBOM work. SBOMs document software components; CBOMs add detail on embedded cryptography to support risk management, policy compliance (e.g., disallowing deprecated algorithms), and PQC transition planning.
Read more →
ESign (India)

Aadhaar eSign is an online electronic signature service in India to facilitate an Aadhaar holder to digitally sign a document. The signature service is facilitated by authenticating the Aadhaar holder via the Aadhaar-based e-KYC (electronic Know Your Customer) service. To eSign a document, one has to have an Aadhaar card and a mobile number registered with Aadhaar. With these two things, an Indian citizen can sign a document remotely without being physically present. == Procedure == The notification issued by Government of India in this regard stipulates the following procedure for the e-authentication using Aadhaar e-KYC services. Authentication of an electronic record by e-authentication technique, which shall be done by the applicable use of e-authentication, hash function, and asymmetric cryptosystem techniques, leading to issuance of digital signature certificate by Certifying Authority, a trusted third party service by subscriber's key pair generation, storing of the key pairs on hardware security module and creation of digital signature provided that the trusted third party shall be offered by the certifying authority (the trusted third party shall send application form and certificate signing request to the Certifying Authority for issuing a digital signature certificate to the subscriber), issuance of digital signature certificate by Certifying Authority shall be based on e-authentication, particulars given in the prescribed format, digitally signed verified information from Aadhaar e-KYC services and electronic consent of digital signature certificate applicant, the manner and requirements for e-authentication shall be as issued by the Controller from time to time, the security procedure for creating the subscriber's key pair shall be in accordance with the e-authentication guidelines issued by the Controller, the standards referred to in rule 6 of the Information Technology (Certifying Authorities) Rules, 2000 shall be complied with, in so far as they relate to the certification function of public key of Digital Signature Certificate applicant, and the manner in which information is authenticated by means of digital signature shall comply with the standards specified in rule 6 of the Information Technology (Certifying Authorities) Rules, 2000 in so far as they relate to the creation, storage and transmission of Digital Signature. == eSign Service Providers == Organisations and individuals seeking to obtain the eSigning Service can utilize the services of various service providers. There are empanelled service providers with whom organisations can register as an Application Service Prover after submitting the requisite documents, getting UAT access, building the application around the service and going through an IT Audit by an CERT-IN empanelled auditor. However, the process of registering as an Application Service Provider is cumbersome, and requires huge investments of time, money and resources in complying with the regulations and building a suitable application. Most organisations prefer using services of plug-n-play gateway providers who take the responsibility of complying with the regulations, hence simplifying the process for the market.
Read more →
Multicloud

Multicloud (also written as multi-cloud or multi cloud) is a term with varying interpretations, generally referring to a system using multiple cloud computing providers. According to ISO/IEC 22123-1: "multi-cloud is a cloud deployment model in which a customer uses public cloud services provided by two or more cloud service providers". Multi-cloud can involve various deployment models, including public, private, and hybrid clouds, and multiple service models, such as Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service (SaaS). Multicloud incorporates workload, data, traffic, and workflow portability options, which can result in varying implementation complexity. When effectively implemented, multicloud solutions can enhance architectural resilience, reduce dependence on a single vendor, and improve flexibility by leveraging services from different providers. However, multicloud strategies also present challenges, including increased operational complexity, security risks, higher costs, and integration difficulties. According to the 2024 State of the Cloud Report by Flexera, multi-cloud adoption has continued to rise in 2024. Enterprises increasingly silo applications into specific clouds and select best-fit services. Key use cases include data analysis in separate clouds and cross-cloud disaster recovery. == Advantages and challenges == There are several advantages to using a multicloud approach, including the ability to negotiate better pricing with cloud providers, the ability to quickly switch to another provider if needed, and the ability to avoid vendor lock-in. Multicloud can also be a good way to hedge against the risks of obsolescence, as it allows you to rely on multiple vendors and open standards, which can prolong the life of your systems. Additional benefits of the multicloud architecture include adherence to local policies that require certain data to be physically present within the area/country, geographical distribution of processing requests from physically closer cloud unit which in turn reduces latency and protect against disasters. Various issues and challenges also present themselves in a multicloud environment. Security and governance is more complicated, and more "moving parts" may create resiliency issues. == Difference between multicloud and hybrid cloud == Multicloud differs from hybrid cloud in that it refers to multiple cloud services from different vendors rather than multiple deployment modes (on-premises hardware, and public and private, cloud hosting). However, when considering a broad definition of multi-cloud, hybrid cloud can still be regarded as a special form of multi-cloud.
Read more →
Data exchange

Data exchange is the process of moving data from one information system to another. It often involves transforming data that is native to the source system into a form that is consumable by the target system or to a standardized form that is consumable by any compatible system. In particular, data exchange allows data to be shared between computer programs. Data exchange is similar to data integration except that data may be restructured with possible loss of content. There may be no way to transform a particular collection based on exchange constraints. Conversely, there may be multiple ways to transform the data, in which case one option must be identified in order to achieve compatibility between source and target. There are two main types of data exchange: broadcast and peer-to-peer (a.k.a. unicast). For broadcast, data is transmitted simultaneously to all consumers. Just as a conference call, all participants get the same information from the speaker at the same time. For peer-to-peer, data is sent to a single receiver, defined by a specific address. For example, a letter goes to just one mail box. == Single-domain == In some domains, a multiple source and target schema (proprietary data formats) may exist. An exchange or interchange format is often developed for a single domain, and then necessary routines (mappings) are written to (indirectly) transform/translate each and every source schema to each and every target schema by using the interchange format as an intermediate step. That requires less work than writing and debugging the many routines that would be required to directly translate each source schema directly to each target schema. Examples of these transformative interchange formats include: Standard Interchange Format for geospatial data; Data Interchange Format for spreadsheet data; Open Document Format for spreadsheets, charts, presentations and word processing documents; GPS eXchange Format or Keyhole Markup Language for describing GPS data; GDSII for integrated circuit layout. == Representation == A data exchange (a.k.a. interchange) language defines a domain-independent way to represent data. These languages have evolved from being markup and display-oriented to support the encoding of metadata that describes the structural attributes of the information. Practice has shown that certain types of formal languages are better suited for this task than others, since their specification is driven by a formal process instead of particular software implementation. For example, XML is a markup language that was designed to enable the creation of dialects (the definition of domain-specific sublanguages). However, it does not contain domain-specific dictionaries or fact types. Beneficial to a reliable data exchange is the availability of standard dictionaries-taxonomies and tools libraries such as parsers, schema validators, and transformation tools. === XML === The popularity of XML for data exchange on the World Wide Web has several reasons. First of all, it is closely related to the preexisting standards Standard Generalized Markup Language (SGML) and Hypertext Markup Language (HTML), and as such a parser written to support these two languages can be easily extended to support XML as well. For example, XHTML has been defined as a format that is formal XML, but understood correctly by most (if not all) HTML parsers. === YAML === YAML was designed to be human-readable and authored via a text editor with notion similar to reStructuredText and wiki syntax. YAML 1.2 also includes a shorthand notion that is compatible with JSON, and as such any JSON document is also valid YAML; this however does not hold the other way. === REBOL === REBOL was designed to be human-readable and authored via a text editor. It uses a simple free-form syntax with minimal punctuation and a rich set of data types (such as URL, email, date and time, tuple, string, tag) that respect common standards. It is designed to not need any additional meta-language, being designed in a metacircular fashion which is why the parse dialect used for definitions and transformations of REBOL dialects is also itself a dialect of REBOL. REBOL was used as a source of inspiration for JSON. === Gellish === Gellish English is a formalized subset of natural English (language), which includes a simple grammar and a large, extensible dictionary (taxonomy) that defines the general and domain specific terminology, whereas the concepts are arranged in a hierarchy, which supports inheritance of knowledge and requirements. The dictionary also includes standardized fact types. The terms and relation types together can be used to create and interpret expressions of facts, knowledge, requirements and other information. Gellish can be used in combination with SQL, RDF/XML, OWL and various other meta-languages. The Gellish standard is a combination of ISO 10303-221 (AP221) and ISO 15926. === List === The following describes and compares popular data exchange languages. Columns Schemas – Whether supports representing domain specific data structure definition Flexible – Whether supports extension of the semantic expression capabilities without modifying the schema Semantic verification – Whether supports semantic verification of the correctness of expressions in the language Dictionary – Whether includes a dictionary and a taxonomy (hierarchy) of concepts with inheritance Information model – Whether supports an information model Synonyms and homonyms – Whether supports the use of synonyms and homonyms in expressions Dialecting – Whether is available in multiple natural languages or dialects Web standard – Whether is standardized by a recognized body Transformations – Whether includes a translation to other standards Lightweight – Whether a lightweight version is available Human readable – Whether expressions are understandable without training Compatibility – Which other tools can be used or are required
Read more →
AS1 (networking)

AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.
Read more →
Social media therapy

Social media therapy is a form of expressive therapy. It uses the act of creating and sharing user-generated content as a way of connecting with and understanding people. Social media therapy combines different expressive therapy aspects of talk therapy, art therapy, writing therapy, and drama therapy and applies them to the web domain. Within social media therapy, synchronous or asynchronous dialogue occurs through exchanges of audio, text or visual information. The digital content is published online to serve as a form of therapy. == Background == Time spent online via email, websites, instant messaging and social media has increased: since 1999, more than 2,554 million people have become internet users. This alters the way people communicate with each other, and alters the connotation of certain words. The concepts of "identity", "friend", "like" and "connected" have adapted alongside technology. People are influenced by data sharing, social marketing, and technological tools. There are multiple therapeutic services offered through the internet. E-therapy, online counseling, cyber therapy, and social media therapy are similar in that each utilizes the internet in order to provide therapy for patients. == Controversy == There are pros and cons when it comes to the subject of online therapy. Criticism of providing therapy through online methods comes from concerns over the lack of physical contact. There are important features of therapy created through face-to-face therapy such as transference and countertransference that can not be created through online therapy. Patricia R. Recupero and Samara E. Rainey stated in their article "Informed Consent to E-Therapy" of American Journal of Psychotherapy that the lack of face-to-face interaction increased the risk of misdiagnosis and misunderstanding between the E-therapist and patient, thereby increasing the risk of uncertainty for the clinician. There are also concerns over the internet creating a distraction from the therapy itself. Confidentiality and privacy concerns have been raised as well. However, several systematic reviews have found that online psychotherapy can produce clinical outcomes comparable to face-to-face treatment, suggesting that physical distance does not inherently reduce therapeutic effectiveness.
Read more →
Elements (toolchain)

RemObjects Elements is a toolchain for software development, comprising six programming languages: C#, Swift, Go, Java, Oxygene (a form of modern Object Pascal), and Visual Basic .NET. All languages interoperate, meaning a single project can use any combination of languages, and they can all be compiled to .NET, the JVM, native, or WebAssembly. Elements supports Microsoft Windows, all Apple Inc. platforms (including iOS, visionOS and watchOS), Android, and Linux. Elements also supports language conversion, allowing source code in one language to be rewritten in another. Elements is supported in Visual Studio, but RemObjects also makes their own IDEs, Fire (on MacOS) and Water (on Windows.) == Background == RemObjects began in 2002, creating software for Delphi, but in 2005 in response to the growth of .NET and that Delphi was targeting only native Windows, they released Oxygene (known as Chrome at the time) as a new version of Object Pascal, with more modern syntax as well as being .NET-native. Since then, five other languages have been added to the suite, as well as compiling for the web via WebAssembly and to native architectures (eg Intel 32/64 or ARM64). Elements is primarily intended for developers who want to pull together libraries and codebases written in multiple languages, including legacy codebases in older languages while modernizing either with newer syntax and features or by adding in the use of newer or more popular languages. Because of the Oxygene flavour of Object Pascal, supporting Delphi apps is a primary focus, including allowing Pascal to be compiled for other architectures or providing language features that match other prominent languages. == Approach == New versions of the Elements come out approximately every week. RemObjects names its programming languages after chemical elements, sometimes with poetic or musical spelling, rather than referring to them directly. They are: C#: Hydrogene Object Pascal: Oxygene Java: Iodine Visual Basic: Mercury Go: Gold Swift: Silver == History == The Elements compiler was first introduced with version 1.0 in 2005 under the name "Chrome", with support for only the Oxygene language on the .NET platform, primarily as a response to the then-new and not well-received Delphi .NET compiler from Embarcadero. Chrome saw updates to version 1.5 'Floorshow' and Chrome 2.0 'Joyride' over the next few years, moving in parallel with major advancements on the .NET platform for .NET 2.0 (Generics) and .NET 3.x (LINQ), respectively. With the release of version 3.0 (code-named Oxygène after the Jean-Michel Jarre album of the same name) Chrome was rebranded to Oxygene in 2008, and also shipped co-branded by Embarcadero as Delphi Prism (later just Prism) as part of RAD Studio, replacing Embarcadero's own and now-defunct Delphi.NET compiler. 2010 saw the release of Oxygene 4 ("Echoes"), the last version to focus on just a single language and platform. With Oxygene 5 in 2011 and Oxygene 6 in 2013, RemObjects introduced new platform support for Java/Android (code-name "Cooper") and then Cocoa, the Apple development platform (code-name "Toffee"). Elements 7.0 was released at the beginning of 2014, adding the second programming language, C# to the compiler, and delegating Oxygene from the product name to merely branding the Object Pascal-based language. Over the subsequent years, Elements gained support for additional languages, with Apple Swift in 2015, Java in 2017, and subsequently Google's Go and Mercury, a revitalized Visual Basic.NET. Elements also gained support for its fourth target platform, "Island", for CPU-native compilation for Windows, Linux, and WebAssembly. In addition to the chemical elements-based names for the different languages, the "Elements" concept was carried on with the introduction of dedicated development environments alchemically named Fire (for the Mac, in 2015) and Water (for Windows, in 2018). == Fire and Water (IDEs) == Fire and Water are integrated development environments developed by RemObjects Software. They are designed specifically for use with the Elements Compiler. Fire is the version developed for macOS, while Water is intended for Microsoft Windows. Both IDEs are designed to work closely with the Elements compiler and are primarily intended for developers using the RemObjects language ecosystem. They support software development across multiple platforms, including .NET, Android, iOS, macOS, Windows, Linux, and WebAssembly. The IDEs include standard development tools such as syntax highlighting, code completion, debugging, and project navigation. Build operations are managed using a custom system known as EBuild, which is part of the broader Elements toolchain. The IDEs are distributed as part of the RemObjects Elements package and are updated in coordination with the compiler itself. == In media == Oxygene has been mentioned several times by Verity Stob in their Chronicles of Delphi series, currently living at The Register.
Read more →
Instant messaging

Instant messaging (IM) technology is a type of synchronous computer-mediated communication involving the immediate (real-time) transmission of messages between two or more parties over the Internet or another computer network. Originally involving simple text message exchanges, modern instant messaging applications and services (also variously known as instant messenger, messaging app, chat app, chat client, or simply a messenger) tend to also feature the exchange of multimedia, emojis, file transfer, VoIP (voice calling), and video chat capabilities. Instant messaging systems facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list") or in chat rooms, and can be standalone apps or integrated into a wider social media platform, or in a website where it can, for instance, be used for conversational commerce. Originally the term "instant messaging" was distinguished from "text messaging" by being run on a computer network instead of a cellular/mobile network, being able to write longer messages, real-time communication, presence ("status"), and being free (only cost of access instead of per SMS message sent). Instant messaging was pioneered in the early Internet era; the IRC protocol was the earliest to achieve wide adoption. Later in the 1990s, ICQ was among the first closed and commercialized instant messengers, and several rival services appeared afterwards as it became a popular use of the Internet. Beginning with its first introduction in 2005, BlackBerry Messenger became the first popular example of mobile-based IM, combining features of traditional IM and mobile SMS. Instant messaging remains very popular today; IM apps are the most widely used smartphone apps: in 2018 for instance there were 980 million monthly active users of WeChat and 1.3 billion monthly users of WhatsApp, the largest IM network. == Overview == Instant messaging (IM), sometimes also called "messaging" or "texting", consists of computer-based human communication between two users (private messaging) or more (chat room or "group") in real-time, allowing immediate receipt of acknowledgment or reply. This is in direct contrast to email, where conversations are not in real-time, and the perceived quasi-synchrony of the communications by the users (although many systems allow users to send offline messages that the other user receives when logging in). Earlier IM networks were limited to text-based communication, not dissimilar to mobile text messaging. As technology has moved forward, IM has expanded to include voice calling using a microphone, videotelephony using webcams, file transfer, location sharing, image and video transfer, voice notes, and other features. IM is conducted over the Internet or other types of networks (see also LAN messenger). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client–server (when all clients have to first connect to the central server). Primary IM services are controlled by their corresponding companies and usually follow the client-server model. At one point, the term "Instant Messenger" was a service mark of AOL Time Warner and could not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". === Clients === Modern IM services generally provide their own client, either a separately installed application or a browser-based client. They are normally centralised networks run by the servers of the platform's operators, unlike peer-to-peer protocols like XMPP. These usually only work within the same IM network, although some allow limited function with other services (see #Interoperability). Third-party client software applications exist that will connect with most of the major IM services. There is the class of instant messengers that uses the serverless model, which doesn't require servers, and the IM network consists only of clients. There are several serverless messengers: RetroShare, Tox, Bitmessage, Ricochet. See also: LAN messenger. Some examples of popular IM services today include Signal, Telegram, WhatsApp Messenger, WeChat, QQ Messenger, Viber, Line, and Snapchat. The popularity of certain apps greatly differ between different countries. Certain apps have an emphasis on certain uses - for example, Skype focuses on video calling, Slack focuses on messaging and file sharing for work teams, and Snapchat focuses on image messages. Some social networking services offer messaging services as a component of their overall platform, such as Facebook's Facebook Messenger, who also own WhatsApp. Others have a direct IM function as an additional adjunct component of their social networking platforms, like Instagram, Reddit, Tumblr, TikTok, Clubhouse and Twitter; this also includes for example dating websites, such as OkCupid or Plenty of Fish, and online gaming chat platforms. === Features === ==== Private and group messaging ==== Private chat allows users to converse privately with another person or a group. Privacy can also be enhanced in several ways, such as end-to-end encryption by default. Public and group chat features allow users to communicate with multiple people simultaneously. ==== Calling ==== Many major IM services and applications offer a call feature for user-to-user voice calls, conference calls, and voice messages. The call functionality is useful for professionals who utilize the application for work purposes and as a hands-free method. Videotelephony using a webcam is also possible by some. ==== Games and entertainment ==== Some IM applications include in-app games for entertainment. Yahoo! Messenger, for example, introduced these where users could play a game and viewed by friends in real-time. MSN Messenger featured a number of playable games within the interface. Facebook's Messenger has had a built-in option to play games with people in a chat, including games like Tetris and Blackjack. Discord features multiple games built inside the "activities" tab in voice channels. ==== Payments ==== A relatively new feature to instant messaging, peer-to-peer payments are available for financial tasks on top of communication. The lack of a service fee also makes these advantageous to financial applications. IM services such as Facebook Messenger and the WeChat 'super-app' for example offer a payment feature. == History == === Early systems === Though the term dates from the 1990s, instant messaging predates the Internet, first appearing on multi-user operating systems like Compatible Time-Sharing System (CTSS) and Multiplexed Information and Computing Service (Multics) in the mid-1960s. Initially, some of these systems were used as notification systems for services like printing, but quickly were used to facilitate communication with other users logged into the same machine. CTSS facilitated communication via text message for up to 30 people. Parallel to instant messaging were early online chat facilities, the earliest of which was Talkomatic (1973) on the PLATO system, which allowed 5 people to chat simultaneously on a 512 x 512 plasma display (5 lines of text + 1 status line per person). During the bulletin board system (BBS) phenomenon that peaked during the 1980s, some systems incorporated chat features which were similar to instant messaging; Freelancin' Roundtable was one prime example. The first such general-availability commercial online chat service (as opposed to PLATO, which was educational) was the CompuServe CB Simulator in 1980, created by CompuServe executive Alexander "Sandy" Trevor in Columbus, Ohio. As networks developed, the protocols spread with the networks. Some of these used a peer-to-peer protocol (e.g. talk, ntalk and ytalk), while others required peers to connect to a server (see talker and IRC). The Zephyr Notification Service (still in use at some institutions) was invented at MIT's Project Athena in the 1980s to allow service providers to locate and send messages to users. Early instant messaging programs were primarily real-time text, where characters appeared as they were typed. This includes the Unix "talk" command line program, which was popular in the 1980s and early 1990s. Some BBS chat programs (i.e. Celerity BBS) also used a similar interface. Modern implementations of real-time text also exist in instant messengers, such as AOL's Real-Time IM as an optional feature. In the latter half of the 1980s and into the early 1990s, the Quantum Link online service for Commodore 64 computers offered user-to-user messages between concurrently connected customers, which they called "On-Line Messages" (or OLM for short), and later "FlashMail." Quantum Link later became America Online and made AOL Instant Messenger (AIM, discussed later). While the Quantum Link client software ran on a Commodore 64, using only
Read more →
Strategic Air Command Digital Information Network

The Strategic Air Command DIgital Network (SACDIN) was a United States military computer network that provided computerized record communications, replacing the Data Transmission Subsystem and part of the Data Display Subsystem of the SAC Automated Command and Control System. SACDIN enabled a rapid flow of communications from headquarters SAC to its fielded forces, such as B-52 bases and ICBM Launch Control Centers. == Logistics == Major portions of SACDIN were developed, engineered and installed by the International Telephone and Telegraph (ITT) company, under contract to the Electronic Systems Center. == Chronology == 1969 - Headquarters SAC submits a request to the Joint Chiefs of Staff to study an expanded communications system, known as the SAC Total Information Network (SATIN). It would interconnect Air Force Satellite Communications (AFSATCOM), Advanced Airborne Command Post (AABNCP), Airborne Command Post (ABNCP), high frequency/single sideband radio HF/SSB radio, SAC Automated Command and Control System (SACCS), Automatic Digital Information Network (AUTODIN), Survivable Low Frequency Communications System (SLFCS) and Command Data Buffer (CDB) 1977 1 November - SATIN IV was effectively terminated by Congress. The restructured program was renamed SAC Digital Network (SACDIN), and was formulated to meet SAC's minimum essential data communications requirements, but also had the capability to grow in a modular fashion. 1986 ?? ??? - SACDIN replaces much of the SAC Automated Command and Control System (SACCS) and the SAC Automated Total Information Network (SATIN)
Read more →