AI Code Editor Online Free

AI Code Editor Online Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  PropBank

  PropBank is a corpus that is annotated with verbal propositions and their arguments—a "proposition bank". Although "PropBank" refers to a specific corpus produced by Martha Palmer et al., the term propbank is also coming to be used as a common noun referring to any corpus that has been annotated with propositions and their arguments. The PropBank project has played a role in research in natural language processing, and has been used in semantic role labelling. == Comparison == PropBank differs from FrameNet, the resource to which it is most frequently compared, in several ways. PropBank is a verb-oriented resource, while FrameNet is centered on the more abstract notion of frames, which generalizes descriptions across similar verbs (e.g. "describe" and "characterize") as well as nouns and other words (e.g. "description"). PropBank does not annotate events or states of affairs described using nouns. PropBank commits to annotating all verbs in a corpus, whereas the FrameNet project chooses sets of example sentences from a large corpus and only in a few cases has annotated longer continuous stretches of text. PropBank-style annotations often remain close to the syntactic level, while FrameNet-style annotations are sometimes more semantically motivated. From the start, PropBank was developed with the idea of serving as training data for machine learning-based semantic role labeling systems in mind. It requires that all arguments to a verb be syntactic constituents and different senses of a word are only distinguished if the differences bear on the arguments. Due to such differences, semantic role labeling with respect to PropBank is often a somewhat easier task than producing FrameNet-style annotations.

  Read more →
• 

  Ontology for Biomedical Investigations

  The Ontology for Biomedical Investigations (OBI) is an open-access, integrated ontology for the description of biological and clinical investigations. OBI provides a model for the design of an investigation, the protocols and instrumentation used, the materials used, the data generated and the type of analysis performed on it. The project is being developed as part of the OBO Foundry and as such adheres to all the principles therein such as orthogonal coverage (i.e. clear delineation from other foundry member ontologies) and the use of a common formal language. In OBI the common formal language used is the Web Ontology Language (OWL). As of March 2008, a pre-release version of the ontology was made available at the project's SVN repository. == Scope == The Ontology for Biomedical Investigations (OBI) addresses the need for controlled vocabularies to support integration and joint ("cross-omics") analysis of experimental data, a need originally identified in the transcriptomics domain by the FGED Society, which developed the MGED Ontology as an annotation resource for microarray data.Smith B, Ashburner M, Rosse C, Bard J, Bug W, Ceusters W, et al. (November 2007). "The OBO Foundry: coordinated evolution of ontologies to support biomedical data integration". Nature Biotechnology. 25 (11): 1251–5. doi:10.1038/nbt1346. PMC 2814061. PMID 17989687. OBI uses the basic formal ontology upper-level ontology as a means of describing general entities that do not belong to a specific problem domain. As such, all OBI classes are a subclass of some BFO class. The ontology has the scope of modeling all biomedical investigations and as such contains ontology terms for aspects such as: biological material – for example blood plasma instrument (and parts of an instrument therein) – for example DNA microarray, centrifuge information content – such as an image or a digital information entity such as an electronic medical record design and execution of an investigation (and individual experiments therein) – for example study design, electrophoresis material separation data transformation (incorporating aspects such as data normalization and data analysis) – for example principal components analysis dimensionality reduction, mean calculation Less 'concrete' aspects such as the role a given entity may play in a particular scenario (for example the role of a chemical compound in an experiment) and the function of an entity (for example the digestive function of the stomach to nutriate the body) are also covered in the ontology. == OBI consortium == The MGED Ontology was originally identified in the transcriptomics domain by the FGED Society and was developed to address the needs of data integration. Following a mutual decision to collaborate, this effort later became a wider collaboration between groups such as FGED, PSI and MSI in response to the needs of areas such as transcriptomics, proteomics and metabolomics and the FuGO (Functional Genomics Investigation Ontology) was created. This later became the OBI covering the wider scope of all biomedical investigations. As an international, cross-domain initiative, the OBI consortium draws upon a pool of experts from a variety of fields, not limited to biology. The current list of OBI consortium members is available at the OBI consortium website. The consortium is made up of a coordinating committee which is a combination of two subgroups, the Community Representative (those representing a particular biomedical community) and the Core Developers (ontology developers who may or may not be members of any single community). Separate to the coordinating committee is the Developers Working Group which consists of developers within the communities collaborating in the development of OBI at the discretion of current OBI Consortium members. == Papers on OBI ==

  Read more →
• 

  NCSA Brown Dog

  NCSA Brown Dog is a research project to develop a method for easily accessing historic research data stored in order to maintain the long-term viability of large bodies of scientific research. It is supported by the National Center for Supercomputing Applications (NCSA) that is funded by the National Science Foundation (NSF). == History == Brown Dog is part of the DataNet partners program funded by NSF in 2008. DataNet was conceived to address the increasingly digital and data-intensive nature of science, engineering and education. Brown Dog is part of a follow-on effort called Data Infrastructure Building Blocks (DIBBs), focused on building software to support DataNet. The project was proposed by researchers at NCSA and the University of Illinois Urbana-Champaign as well as researchers from Boston University and the University of North Carolina at Chapel Hill. == Unstructured, uncurated, long tail data == Much scientific data is smaller, unstructured and uncurated and thus not easily shared. Such data is sometimes referred to as "long tail" data. This borrows a term from statistics and refers to the tail of the distribution of project sizes. The majority of smaller projects lack the resources to properly steward the data they produce. This so-called "long tail" data, both past and present, has the potential to inform future research in many study areas. Much of this data has become inaccessible due to obsolete software and file formats. The resulting impossibility of reviewing data from older research disrupts the overall scientific research project. == Approach == Brown Dog describes itself as the "super mutt" of software (thus the name "Brown Dog"), serving as a low-level data infrastructure to interface digital data content across the internet. Its approach is to use every possible source of automated help (i.e., software) in existence in a robust and provenance-preserving manner to create a service that can deal with as much of this data as possible. The project sees the broader impact of its work in its potential to serve the general public as a sort of "DNS for data", with the goal of making all data and all file formats as accessible as webpages are today. == Technology == Brown Dog seeks to address problems involving the use of uncurated and unstructured data collections through the development of two services: the Data Access Proxy (DAP) to aid in the conversion of file formats and the Data Tilling Services (DTS) for the automatic extraction of metadata from file contents. Once developed, researchers and general public users will be able to download browser plugins and other tools from the Brown Dog tool catalog. === Data Tilling Service === Data Tilling Service (DTS) will allow users to search data collections using an existing file to discover other similar files in a collection. A DTS search field will be appended to configured browsers where example files can be dropped. This tells DTS to search all the files under a given URL for files similar to the dropped file. For example, while browsing an online image collection, a user could drop an image of three people into the search field, and the DTS would return all images in the collection that also contain three people. If DTS encounters a foreign file format, it will utilize DAP to make the file accessible. DTS also indexes the data and extract and appends metadata to files and collections enabling users to gain some sense of the type of data they are encountering. This service runs on port 9443. === Data Access Proxy === Data Access Proxy (DAP) allows users to access data files that would otherwise be unreadable. Similar to an internet gateway or Domain Name Service, the DAP configuration would be entered into a user's machine and browser settings. Data requests over HTTP would first be examined by DAP to determine if the native file format is readable on the client device. If not, DAP converts the file into the best available format readable by the client machine. Alternatively, the user could specify the desired format themselves. This service runs on port 8184. == Use cases == Brown Dog targets three use cases proposed by groups within the EarthCube research communities. Developers and researchers from these communities will work together on use cases that span geoscience, engineering, biology and social science. === Long tail vegetation data in ecology and global change biology === This use case is led by Michael Dietze, Boston University Data on the abundance, species composition, and size structure of vegetation is critically important for a wide array of sub-disciplines in ecology, conservation, natural resource management, and global change biology. However, addressing many of the pressing questions in these disciplines will require that terrestrial biosphere and hydrologic models are able to assimilate the large amount of long-tail data that exists but is largely inaccessible. The Brown Dog team in cooperation with researches from Dietze's lab will facilitate the capture of a huge body of smaller research-oriented vegetation data sets collected over many decades and historical vegetation data embedded in Public Land Survey data dating back to 1785. This data will be used as initial conditions for models, to make sense of other large data sets and for model calibration and validation. === Designing green infrastructure considering storm water and human requirements === This use case is led by Barbara Minsker], University of Illinois at Urbana-Champaign]; William Sullivan, University of Illinois at Urbana-Champaign; Arthur Schmidt, University of Illinois at Urbana-Champaign. This case study involves developing novel green infrastructure design criteria and models that integrate requirements for storm water management and ecosystem and human health and well being. To address the scientific and social problems associated with the design of green spaces, data accessibility and availability is a major challenge. This study will focus on identified areas of the Green Healthy Neighborhood Planning region within the City of Chicago where existing local sewer performance is most deficient and where changes in impervious area through green infrastructure would be beneficial to under served neighborhoods. Brown Dog will be used to extract long-tail experimental data on human landscape preferences and health impacts. This data will be used to develop a human health impacts model that will then be linked together with a terrestrial biosphere model and a storm water model using Brown Dog technology. === Development and application for critical zone studies === This use case is led by Praveen Kumar, University of Illinois at Urbana-Champaign Critical Zone (CZ) is the "skin" of the earth that extends from the treetops to the bedrock that is created by life processes working at scales from microbes to biomes. The Critical Zone supports all terrestrial living systems. Its upper part is the bio-mantle. This is where terrestrial biota live, reproduce, use and expend energy, and where their wastes and remains accumulate and decompose. It encompasses the soil, which acts as a geomembrane through which water and solutes, energy, gases, solids, and organisms interact with the atmosphere, biosphere, hydrosphere, and lithosphere. A variety of drivers affect this bio-dynamic zone, ranging from climate and deforestation to agriculture, grazing and human development. Understanding and predicting these effects is central to managing and sustaining vital ecosystem services such as soil fertility, water purification, and production of food resources, and, at larger scales, global carbon cycling and carbon sequestration. The CZ provides a unifying framework for integrating terrestrial surface and near-surface environments, and reflects an intricate web of biological and chemical processes and human impacts occurring at vastly different temporal and spatial scales. The nature of these data create significant challenges for inter-disciplinary studies of the CZ because integration of the variety and number of data products and models has been a barrier. On the other hand, CZ data provides an excellent opportunity for defining, testing and implementing Brown Dog technologies. In this context "unstructured" data is viewed broadly as consisting of a collection of heterogeneous data with formats that reflect temporal and disciplinary legacies, data from emerging low cost open hardware based sensors and embedded sensor networks that lack well defined metadata and sensor characteristics, as well as data that are available as maps, images and text. == NSF Award == CIF21 DIBBs: Brown Dog was awarded in the winter of 2013 with a start date of October 1, 2013. Estimated expiration date is September 30, 2018. The award amount was $10,519,716.00, the largest DIBB award. The principal investigator is Kenton McHenry of NCSA at the University of Illinois at Urbana-Champaign. Coleaders are Jong Lee NCSA/UIU

  Read more →
• 

  Informationist

  An informationist (or information specialist in context) provides research and knowledge management services in the context of clinical care or biomedical research. Although there is no one educational pathway or formalized set of skills or knowledge for informationists, one way to think of the informationist is as one who possesses the knowledge and skill of a medical librarian with extensive research specialization and some formal clinical or public health education that goes beyond on-the-job osmosis. Medical librarians and other biomedical professional organizations have been exploring the possibilities for evaluating how informationists are being used and whether their activities supplement or replace medical library activity. More generally, an informationist is a professional who works with information within a particular business, analytic or scientific context to drive toward outcomes based on evidence, analysis, prediction and execution. For example, an extension of the term is increasingly emerging in financial services, life sciences and health care industries. Though still nascently in use, its adoption applies to individuals with extensive industry expertise, acute familiarity with organizational structures and processes, deep domain level information mastery and information systems technical savvy. Informationists in this context support transformational initiatives within and across functional areas of an enterprise as architects, governance experts, continuous improvement advocates and strategists. == Background == The term was proposed in 2000 by Davidoff & Florance. Their editorial suggested that physicians should be delegating their information needs to informationists, just as they currently order CT scans from radiologists or cardiac catheterizations from cardiologists. They conceived of an information professional who was embedded in (and indeed, supported by) the clinical departments. Supporters of the concept see it as a means for librarians to reinvigorate connections with the faculty/clinicians, as well as provide superior service by dint of informationists' biomedical training. Critics complained that the idea is nothing new; librarians already provide in-depth, high quality information services and clinical medical librarians have been working alongside physicians, nurses and other clinicians for years. Large informationist programs in the U.S. exist at the National Institutes of Health and at Vanderbilt University. Welch Medical Library at Johns Hopkins University (JHU) is developing an informationist service model in which its 10 clinical and public health librarians are moving from serving as liaison librarians for assigned departments toward becoming embedded informationists within their departments. To prepare for the embedded informationist role, librarians are undertaking education as needed to supplement their backgrounds. For example, librarians bring experience in clinical behavior counseling, public health, nursing, and more. Informationist training can then focus upon filling gaps in research methods knowledge more so than on gaining additional knowledge in the librarian's area of expertise. Courses, seminars and workshops being undertaken include those covering systematic reviews, evidence-based medicine, critical appraisal, medical language, anatomy and physiology, biostatistics, and clinical research. The term informationist is related to that of informatician—also informaticist—and many informationists do possess skills in clinical topics, bioinformatics, and biomedical informatics. Harvard University, the University of Pittsburgh, and Washington University in St. Louis are examples of institutional libraries which have hired PhD-level scientists (who may or may not have library degrees) to provide informatics support for biomedical research.

  Read more →
• 

  Language Server Protocol

  The Language Server Protocol (LSP) is an open, JSON-RPC-based protocol for use between source-code editors or integrated development environments (IDEs) and servers that provide "language intelligence tools": programming language-specific features like code completion, syntax highlighting and marking of warnings and errors, as well as refactoring routines. The goal of the protocol is to allow programming language support to be implemented and distributed independently of any given editor or IDE. In the early 2020s, LSP quickly became a "norm" for language intelligence tools providers. == History == LSP was originally developed for Microsoft Visual Studio Code and is now an open standard. On June 27, 2016, Microsoft announced a collaboration with Red Hat and Codenvy to standardize the protocol's specification. Its specification is hosted and developed on GitHub. == Background == Modern IDEs provide programmers with sophisticated features like code completion, refactoring, navigating to a symbol's definition, syntax highlighting, and error and warning markers. For example, in a text-based programming language, a programmer might want to rename a method read. The programmer could either manually edit the respective source code files and change the appropriate occurrences of the old method name into the new name, or instead use an IDE's refactoring capabilities to make all the necessary changes automatically. To be able to support this style of refactoring, an IDE needs a sophisticated understanding of the programming language that the program's source is written in. A programming tool without such an understanding—for example, one that performs a naive search-and-replace instead—could introduce errors. When renaming a read method, for example, the tool should not replace the partial match in a variable that might be called readyState, nor should it replace the portion of a code comment containing the word "already". Neither should renaming a local variable read, for example, end up altering identically-named variables in other scopes. Conventional compilers or interpreters for a specific programming language are typically unable to provide these language services, because they are written with the goal of either transforming the source code into object code or immediately executing the code. Additionally, language services must be able to handle source code that is not well-formed, e.g. because the programmer is in the middle of editing and has not yet finished typing a statement, procedure, or other construct. Additionally, small changes to a source code file which are done during typing usually change the semantics of the program. In order to provide instant feedback to the user, the editing tool must be able to very quickly evaluate the syntactical and semantical consequences of a specific modification. Compilers and interpreters therefore provide a poor candidate for producing the information needed for an editing tool to consume. Prior to the design and implementation of the Language Server Protocol for the development of Visual Studio Code, most language services were generally tied to a given IDE or other editor. In the absence of the Language Server Protocol, language services are typically implemented by using a tool-specific extension API. Providing the same language service to another editing tool requires effort to adapt the existing code so that the service may target the second editor's extension interfaces. The Language Server Protocol allows for decoupling language services from the editor so that the services may be contained within a general-purpose language server. Any editor can inherit sophisticated support for many different languages by making use of existing language servers. Similarly, a programmer involved with the development of a new programming language can make services for that language available to existing editing tools. Making use of language servers via the Language Server Protocol thus also reduces the burden on vendors of editing tools, because vendors do not need to develop language services of their own for the languages the vendor intends to support, as long as the language servers have already been implemented. The Language Server Protocol also enables the distribution and development of servers contributed by an interested third party, such as end users, without additional involvement by either the vendor of the compiler for the programming language in use or the vendor of the editor to which the language support is being added. LSP is not restricted to programming languages. It can be used for any kind of text-based language, like specifications or domain-specific languages (DSL). == Technical overview == When a user edits one or more source code files using a language server protocol-enabled tool, the tool acts as a client that consumes the language services provided by a language server. The tool may be a text editor or IDE and the language services could be refactoring, code completion, etc. The client informs the server about what the user is doing, e.g., opening a file or inserting a character at a specific text position. The client can also request the server to perform a language service, e.g. to format a specified range in the text document. The server answers a client's request with an appropriate response. For example, the formatting request is answered either by a response that transfers the formatted text to the client or by an error response containing details about the error. The Language Server Protocol defines the messages to be exchanged between client and language server. They are JSON-RPC preceded by headers similar to HTTP. Messages may originate from the server or client. The protocol does not make any provisions about how requests, responses and notifications are transferred between client and server. For example, client and server could be components within the same process exchanging JSON strings via method calls. They could also be different processes on the same or on different machines communicating via network sockets. == Registry == There are lists of LSP-compatible implementations, maintained by the community-driven Langserver.org or Microsoft.

  Read more →
• 

  Geospatial metadata

  Geospatial metadata (also geographic metadata) is a type of metadata applicable to geographic data and information. Such objects may be stored in a geographic information system (GIS) or may simply be documents, data-sets, images or other objects, services, or related items that exist in some other native environment but whose features may be appropriate to describe in a (geographic) metadata catalog (may also be known as a data directory or data inventory). == Definition == ISO 19115:2013 "Geographic Information – Metadata" from ISO/TC 211, the industry standard for geospatial metadata, describes its scope as follows: [This standard] provides information about the identification, the extent, the quality, the spatial and temporal aspects, the content, the spatial reference, the portrayal, distribution, and other properties of digital geographic data and services. ISO 19115:2013 also provides for non-digital mediums: Though this part of ISO 19115 is applicable to digital data and services, its principles can be extended to many other types of resources such as maps, charts, and textual documents as well as non-geographic data. The U.S. Federal Geographic Data Committee (FGDC) describes geospatial metadata as follows: A metadata record is a file of information, usually presented as an XML document, which captures the basic characteristics of a data or information resource. It represents the who, what, when, where, why and how of the resource. Geospatial metadata commonly document geographic digital data such as Geographic Information System (GIS) files, geospatial databases, and earth imagery but can also be used to document geospatial resources including data catalogs, mapping applications, data models and related websites. Metadata records include core library catalog elements such as Title, Abstract, and Publication Data; geographic elements such as Geographic Extent and Projection Information; and database elements such as Attribute Label Definitions and Attribute Domain Values. == History == The growing appreciation of the value of geospatial metadata through the 1980s and 1990s led to the development of a number of initiatives to collect metadata according to a variety of formats either within agencies, communities of practice, or countries/groups of countries. For example, NASA's "DIF" metadata format was developed during an Earth Science and Applications Data Systems Workshop in 1987, and formally approved for adoption in 1988. Similarly, the U.S. FGDC developed its geospatial metadata standard over the period 1992–1994. The Spatial Information Council of Australia and New Zealand (ANZLIC), a combined body representing spatial data interests in Australia and New Zealand, released version 1 of its "metadata guidelines" in 1996. ISO/TC 211 undertook the task of harmonizing the range of formal and de facto standards over the approximate period 1999–2002, resulting in the release of ISO 19115 "Geographic Information – Metadata" in 2003 and a subsequent revision in 2013. As of 2011 individual countries, communities of practice, agencies, etc. have started re-casting their previously used metadata standards as "profiles" or recommended subsets of ISO 19115, occasionally with the inclusion of additional metadata elements as formal extensions to the ISO standard. The growth in popularity of Internet technologies and data formats, such as Extensible Markup Language (XML) during the 1990s led to the development of mechanisms for exchanging geographic metadata on the web. In 2004, the Open Geospatial Consortium released the current version (3.1) of Geography Markup Language (GML), an XML grammar for expressing geospatial features and corresponding metadata. With the growth of the Semantic Web in the 2000s, the geospatial community has begun to develop ontologies for representing semantic geospatial metadata. Some examples include the Hydrology and Administrative ontologies developed by the Ordnance Survey in the United Kingdom. == ISO 19115: Geographic information – Metadata == ISO 19115 is a standard of the International Organization for Standardization (ISO). The standard is part of the ISO geographic information suite of standards (19100 series). ISO 19115 and its parts define how to describe geographical information and associated services, including contents, spatial-temporal purchases, data quality, access and rights to use. The objective of this International Standard is to provide a clear procedure for the description of digital geographic data-sets so that users will be able to determine whether the data in a holding will be of use to them and how to access the data. By establishing a common set of metadata terminology, definitions and extension procedures, this standard promotes the proper use and effective retrieval of geographic data. ISO 19115 was revised in 2013 to accommodate growing use of the internet for metadata management, as well as add many new categories of metadata elements (referred to as codelists) and the ability to limit the extent of metadata use temporally or by user. == ISO 19139 Geographic information Metadata XML schema implementation == ISO 19139:2012 provides the XML implementation schema for ISO 19115 specifying the metadata record format and may be used to describe, validate, and exchange geospatial metadata prepared in XML. The standard is part of the ISO geographic information suite of standards (19100 series), and provides a spatial metadata XML (spatial metadata eXtensible Mark-up Language (smXML)) encoding, an XML schema implementation derived from ISO 19115, Geographic information – Metadata. The metadata includes information about the identification, constraint, extent, quality, spatial and temporal reference, distribution, lineage, and maintenance of the digital geographic data-set. == Metadata directories == Also known as metadata catalogues or data directories. (need discussion of, and subsections on GCMD, FGDC metadata gateway, ASDD, European and Canadian initiatives, etc. etc.) GIS Inventory – National GIS Inventory System which is maintained by the US-based National States Geographic Information Council (NSGIC) as a tool for the entire US GIS Community. Its primary purpose is to track data availability and the status of geographic information system (GIS) implementation in state and local governments to aid the planning and building of statewide spatial data infrastructures (SSDI). The Random Access Metadata for Online Nationwide Assessment (RAMONA) database is a critical component of the GIS Inventory. RAMONA moves its FGDC-compliant metadata (CSDGM Standard) for each data layer to a web folder and a Catalog Service for the Web (CSW) that can be harvested by Federal programs and others. This provides far greater opportunities for discovery of user information. The GIS Inventory website was originally created in 2006 by NSGIC under award NA04NOS4730011 from the Coastal Services Center, National Oceanic and Atmospheric Administration, U.S. Department of Commerce. The Department of Homeland Security has been the principal funding source since 2008 and they supported the development of the Version 5 during 2011/2012 under Order Number HSHQDC-11-P-00177. The Federal Emergency Management Agency and National Oceanic and Atmospheric Administration have provided additional resources to maintain and improve the GIS Inventory. Some US Federal programs require submission of CSDGM-Compliant Metadata for data created under grants and contracts that they issue. The GIS Inventory provides a very simple interface to create the required Metadata. GCMD - Global Change Master Directory's goal is to enable users to locate and obtain access to Earth science data sets and services relevant to global change and Earth science research. The GCMD database holds more than 20,000 descriptions of Earth science data sets and services covering all aspects of Earth and environmental sciences. ECHO - The EOS Clearing House (ECHO) is a spatial and temporal metadata registry, service registry, and order broker. It allows users to more efficiently search and access data and services through the Reverb Client or Application Programmer Interfaces (APIs). ECHO stores metadata from a variety of science disciplines and domains, totalling over 3400 Earth science data sets and over 118 million granule records. GoGeo - GoGeo is a service run by EDINA (University of Edinburgh) and is supported by Jisc. GoGeo allows users to conduct geographically targeted searches to discover geospatial datasets. GoGeo searches many data portals from the HE and FE community and beyond. GoGeo also allows users to create standards compliant metadata through its Geodoc metadata editor. == Geospatial metadata tools == There are many proprietary GIS or geospatial products that support metadata viewing and editing on GIS resources. For example, ESRI's ArcGIS Desktop, SOCET GXP, Autodesk's AutoCAD Map 3D 2008, Arcitecta's Mediaflux and Intergraph's Geo

  Read more →
• 

  OpenSMILE

  openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.

  Read more →
• 

  Pointer jumping

  Pointer jumping or path doubling is a design technique for parallel algorithms that operate on pointer structures, such as linked lists and directed graphs. Pointer jumping allows an algorithm to follow paths with a time complexity that is logarithmic with respect to the length of the longest path. It does this by "jumping" to the end of the path computed by neighbors. The basic operation of pointer jumping is to replace each neighbor in a pointer structure with its neighbor's neighbor. In each step of the algorithm, this replacement is done for all nodes in the data structure, which can be done independently in parallel. In the next step when a neighbor's neighbor is followed, the neighbor's path already followed in the previous step is added to the node's followed path in a single step. Thus, each step effectively doubles the distance traversed by the explored paths. Pointer jumping is best understood by looking at simple examples such as list ranking and root finding. == List ranking == One of the simpler tasks that can be solved by a pointer jumping algorithm is the list ranking problem. This problem is defined as follows: given a linked list of N nodes, find the distance (measured in the number of nodes) of each node to the end of the list. The distance d(n) is defined as follows, for nodes n that point to their successor by a pointer called next: If n.next is nil, then d(n) = 0. For any other node, d(n) = d(n.next) + 1. This problem can easily be solved in linear time on a sequential machine, but a parallel algorithm can do better: given n processors, the problem can be solved in logarithmic time, O(log N), by the following pointer jumping algorithm: The pointer jumping occurs in the last line of the algorithm, where each node's next pointer is reset to skip the node's direct successor. It is assumed, as in common in the PRAM model of computation, that memory access are performed in lock-step, so that each n.next.next memory fetch is performed before each n.next memory store; otherwise, processors may clobber each other's data, producing inconsistencies. The following diagram follows how the parallel list ranking algorithm uses pointer jumping for a linked list with 11 elements. As the algorithm describes, the first iteration starts initialized with all ranks set to 1 except those with a null pointer for next. The first iteration looks at immediate neighbors. Each subsequent iteration jumps twice as far as the previous. Analyzing the algorithm yields a logarithmic running time. The initialization loop takes constant time, because each of the N processors performs a constant amount of work, all in parallel. The inner loop of the main loop also takes constant time, as does (by assumption) the termination check for the loop, so the running time is determined by how often this inner loop is executed. Since the pointer jumping in each iteration splits the list into two parts, one consisting of the "odd" elements and one of the "even" elements, the length of the list pointed to by each processor's n is halved in each iteration, which can be done at most O(log N) time before each list has a length of at most one. == Root finding == Following a path in a graph is an inherently serial operation, but pointer jumping reduces the total amount of work by following all paths simultaneously and sharing results among dependent operations. Pointer jumping iterates and finds a successor — a vertex closer to the tree root — each time. By following successors computed for other vertices, the traversal down each path can be doubled every iteration, which means that the tree roots can be found in logarithmic time. Pointer doubling operates on an array successor with an entry for every vertex in the graph. Each successor[i] is initialized with the parent index of vertex i if that vertex is not a root or to i itself if that vertex is a root. At each iteration, each successor is updated to its successor's successor. The root is found when the successor's successor points to itself. The following pseudocode demonstrates the algorithm. algorithm Input: An array parent representing a forest of trees. parent[i] is the parent of vertex i or itself for a root Output: An array containing the root ancestor for every vertex for i ← 1 to length(parent) do in parallel successor[i] ← parent[i] while true for i ← 1 to length(successor) do in parallel successor_next[i] ← successor[successor[i]] if successor_next = successor then break for i ← 1 to length(successor) do in parallel successor[i] ← successor_next[i] return successor The following image provides an example of using pointer jumping on a small forest. On each iteration the successor points to the vertex following one more successor. After two iterations, every vertex points to its root node. == History and examples == Although the name pointer jumping would come later, JáJá attributes the first uses of the technique in early parallel graph algorithms and list ranking. The technique has been described with other names such as shortcutting, but by the 1990s textbooks on parallel algorithms consistently used the term pointer jumping. Today, pointer jumping is considered a software design pattern for operating on recursive data types in parallel. As a technique for following linked paths, graph algorithms are a natural fit for pointer jumping. Consequently, several parallel graph algorithms utilizing pointer jumping have been designed. These include algorithms for finding the roots of a forest of rooted trees, connected components, minimum spanning trees, and biconnected components. However, pointer jumping has also shown to be useful in a variety of other problems including computer vision, image compression, and Bayesian inference.

  Read more →
• 

  Photoanalysis

  Photoanalysis (or photo analysis) refers to the study of pictures to compile various types of data, for example, to measure the size distribution of virtually anything that can be captured by photo. Photoanalysis technology has changed the way mines and mills quantify fragmented material. Images are an effective way to document conditions before, after, and even during blasting activities. The technology is advancing at a high rate, and lenses, storage media memory, light sensitivity and resolution have been improving steadily. Today's digital cameras and camcorders include high-resolution optics, compact size, automatic time and date stamps, good battery life, shutters to freeze motion, and computers to autofocus and eliminate jitter using image stabilization. == Mining == Photoanalysis in mining operations can provide an automated system that forewarns a company of potential problems with materials, leading to economies and reduced damage caused from over-sized materials. It can also help determine the effectiveness of blasts. A company can use this technology to monitor materials moving on a conveyor belt in an underground environment, to measure piles left over from a blast, and even measure the amount of material being carried by dump trucks or vessels to a destination. Photoanalysis is being used on SAG mills worldwide to control the size of rock being crushed. Companies are using this technology to determine the size of particles being processed in the SAG Mill.[1] Archived 2009-05-23 at the Wayback Machine Having oversize material entering the SAG mill makes an operation less efficient, costing companies money in electrical and maintenance costs. Photoanalysis technology can eliminate unwanted material before it enters the mill, keeping rock crushing costs low. == Forestry == Wood chip size can affect the overall quality of a product. With automated photoanalysis systems, companies can remove any unwanted wrong-size particles without stopping their mill process. Photoanalysis can affect how efficiently forestry companies operate. In mills worldwide, photoanalysis technology is improving the use of lumber products, cutting back on the amount of trees being used to operate, and saving companies money through quality control optimization.[2] With the current downturn in the North American forestry industry, operators are looking at making their mills more efficient and effective when processing materials. Photoanalysis technology helps identify any weaknesses in the process by continuously monitoring different sections of an operation. == Agriculture == Agricultural companies can, using photoanalysis, monitor conveyor belts of food without contaminating the product by touching it. Other benefits of photoanalysis systems include: Automated removal of any unwanted material on food conveyor Improved quality control for the most important parts of the agricultural process Pinpoint accuracy that helps the efficiency and effectiveness of product handling techniques The importance of photoanalysis technology is being noticed by the agricultural industry as it identifies any unwanted materials going through the process. In an example, if a mouse is on a conveyor of corn, photoanalysis technology would be able to identify the unwanted object and remove it before it contaminates the whole process. == Origins of photoanalysis technology == Photoanalysis technology was created by using the Waterloo Image Enhancement Process in the 1980s. After further development of the imaging process with explosives producer DuPont, engineers Tom Palangio and Takis Katsabanis began selling photoanalysis software commercially. They later renamed the process WipFrag, standing for Waterloo Image Process Fragmentation Today, photoanalysis technology has evolved into stabilized and portable systems that can automatically capture and analyze results instantly. Thousands of these products are currently being used around the world to measure fragmented material. == Photoanalysis equipment photos == == Fragmentation analysis == Fragmentation analysis is becoming a popular term in mining, agricultural and forestry industries. With the majority of money in these industries directed towards the proper sizing of materials, companies are using fragmentation analysis to determine various factors within an operation.[3] The two main ways a company keeps track of fragmented material are through manual and automated sieving procedures. Manual sieving involves extracting a sample of material to analyze the size distribution. The results can be tabulated within two days. Automated sieving is an advanced way of sieving materials running through a process. Without having to extract the material, photoanalysis can take place, allowing for immediate results with pinpoint accuracy. == Blast Fragmentation Software == Operators are using fragmentation analysis to determine the effectiveness of various blasts. With automated sieving technology, workers can track the success of these blasts and receive instant results. Companies are using these results to determine what blasting method yielded the best results for their specific operation. The common variables associated with blast optimization are the provided Particle Size Distribution (PSD) from a shovel fragmentation system, geology including rock type and fracturing, and energy factor. By using photoanalysis the fragmented materials can be monitored, offering pinpoint accuracy and allowing mine operators to make adjustments to future blasting procedures. See Optical Granulometry to view the automated sieving process. == Pre-crushing analysis == Maintenance costs can be significantly reduced if an operation focuses on the fragmentation of the particles passing through their process. Automated sieving systems can detect and help remove any oversize material before it enters the crusher and causes maintenance problems. It also helps determine the effectiveness of the mining process prior to crushing; the sizing of material is always a critical part of operations in the mining, forestry and agricultural industries. Having an analysis taking place at every major point in an operation allows for the proper tracking of material being processed. Engineers can then determine what part of the process needs improving based solely on the size of material. == Post-crushing analysis == Measuring how effective industrial crushers are, can help save a company millions of dollars in energy costs on an annual basis. There are two components that affect a typical crusher: the size of the material inputted, and the speed at which the crusher is moving. If the user can find a perfect balance between these two components, the materials will be crushed to the right size in the shortest time possible. Meeting the material standards set by governments and large companies can be hard. Having a post-crushing analysis taking place ensures that no oversize material gets shipped; eliminating the chance of getting fined for not meeting industry specifications.

  Read more →
• 

  Ubiquitous robot

  Ubiquitous robot is a term used in an analogous way to ubiquitous computing. Software useful for "integrating robotic technologies with technologies from the fields of ubiquitous and pervasive computing, sensor networks, and ambient intelligence". The emergence of mobile phone, wearable computers and ubiquitous computing makes it likely that human beings will live in a ubiquitous world in which all devices are fully networked. The existence of ubiquitous space resulting from developments in computer and network technology will provide motivations to offer desired services by any IT device at any place and time through user interactions and seamless applications. This shift has hastened the ubiquitous revolution, which has further manifested itself in the new multidisciplinary research area, ubiquitous robotics. It initiates the third generation of robotics following the first generation of the industrial robot and the second generation of the personal robot. Ubiquitous robot (Ubibot) is a robot incorporating three components including virtual software robot or avatar, real-world mobile robot and embedded sensor system in surroundings. Software robot within a virtual world can control a real-world robot as a brain and interact with human beings. Researchers of KAIST, Korea describe these three components as a Sobot (Software robot), Mobot (Mobile robot), and Embot (Embedded robot).

  Read more →
• 

  Interviewer effect

  The interviewer effect (also called interviewer variance or interviewer error) is the distortion of response to an interviewer-administered data collection effort which results from differential reactions to the social style and personality of interviewers or to their presentation of particular questions. The use of fixed-wording questions is one method of reducing interviewer bias. Anthropological research and case-studies are also affected by the problem, which is exacerbated by the self-fulfilling prophecy, when the researcher is also the interviewer it is also any effect on data gathered from interviewing people that is caused by the behavior or characteristics (real or perceived) of the interviewer. Interviewer effects can also be associated with the characteristics of the interviewer, such as race. Whether black respondents are interviewed by white interviewers or black interviewers has a strong impact on their responses to both attitude questions and behavioral ones. In the latter case, for example, if black respondents are interviewed by black interviewers in pre-election surveys, they are more likely to actually vote in the upcoming election than if they are interviewed by white interviewers. Furthermore, the race of the interviewer can also affect answers to factual questions that might take the form of a test of how informed the respondent is. Black respondents in a survey of political knowledge, for example, get fewer correct answers to factual questions about politics when interviewed by white interviewers than when interviewed by black interviewers. This is consistent with the research literature on stereotype threat, which finds diminished test performance of potentially stigmatised groups when the interviewer or test supervisor is from a perceived higher status group. Interviewer effects can be mitigated somewhat by randomly assigning subjects to different interviewers, or by using tools such as computer-assisted telephone interviewing (CATI).

  Read more →
• 

  Communication-avoiding algorithm

  Communication-avoiding algorithms minimize movement of data within a memory hierarchy for improving its running-time and energy consumption. These minimize the total of two costs (in terms of time and energy): arithmetic and communication. Communication, in this context refers to moving data, either between levels of memory or between multiple processors over a network. It is much more expensive than arithmetic. == Formal theory == === Two-level memory model === A common computational model in analyzing communication-avoiding algorithms is the two-level memory model: There is one processor and two levels of memory. Level 1 memory is infinitely large. Level 0 memory ("cache") has size M {\displaystyle M} . In the beginning, input resides in level 1. In the end, the output resides in level 1. Processor can only operate on data in cache. The goal is to minimize data transfers between the two levels of memory. === Matrix multiplication === Corollary 6.2: More general results for other numerical linear algebra operations can be found in. The following proof is from. == Motivation == Consider the following running-time model: Measure of computation = Time per FLOP = γ Measure of communication = No. of words of data moved = β ⇒ Total running time = γ·(no. of FLOPs) + β·(no. of words) From the fact that β >> γ as measured in time and energy, communication cost dominates computation cost. Technological trends indicate that the relative cost of communication is increasing on a variety of platforms, from cloud computing to supercomputers to mobile devices. The report also predicts that gap between DRAM access time and FLOPs will increase 100× over coming decade to balance power usage between processors and DRAM. Energy consumption increases by orders of magnitude as we go higher in the memory hierarchy. United States president Barack Obama cited communication-avoiding algorithms in the FY 2012 Department of Energy budget request to Congress: New Algorithm Improves Performance and Accuracy on Extreme-Scale Computing Systems. On modern computer architectures, communication between processors takes longer than the performance of a floating-point arithmetic operation by a given processor. ASCR researchers have developed a new method, derived from commonly used linear algebra methods, to minimize communications between processors and the memory hierarchy, by reformulating the communication patterns specified within the algorithm. This method has been implemented in the TRILINOS framework, a highly-regarded suite of software, which provides functionality for researchers around the world to solve large scale, complex multi-physics problems. == Objectives == Communication-avoiding algorithms are designed with the following objectives: Reorganize algorithms to reduce communication across all memory hierarchies. Attain the lower-bound on communication when possible. The following simple example demonstrates how these are achieved. === Matrix multiplication example === Let A, B and C be square matrices of order n × n. The following naive algorithm implements C = C + A B: for i = 1 to n for j = 1 to n for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) Arithmetic cost (time-complexity): n2(2n − 1) for sufficiently large n or O(n3). Rewriting this algorithm with communication cost labelled at each step for i = 1 to n {read row i of A into fast memory} - n2 reads for j = 1 to n {read C(i,j) into fast memory} - n2 reads {read column j of B into fast memory} - n3 reads for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) {write C(i,j) back to slow memory} - n2 writes Fast memory may be defined as the local processor memory (CPU cache) of size M and slow memory may be defined as the DRAM. Communication cost (reads/writes): n3 + 3n2 or O(n3) Since total running time = γ·O(n3) + β·O(n3) and β >> γ the communication cost is dominant. The blocked (tiled) matrix multiplication algorithm reduces this dominant term: ==== Blocked (tiled) matrix multiplication ==== Consider A, B and C to be n/b-by-n/b matrices of b-by-b sub-blocks where b is called the block size; assume three b-by-b blocks fit in fast memory. for i = 1 to n/b for j = 1 to n/b {read block C(i,j) into fast memory} - b2 × (n/b)2 = n2 reads for k = 1 to n/b {read block A(i,k) into fast memory} - b2 × (n/b)3 = n3/b reads {read block B(k,j) into fast memory} - b2 × (n/b)3 = n3/b reads C(i,j) = C(i,j) + A(i,k) B(k,j) - {do a matrix multiply on blocks} {write block C(i,j) back to slow memory} - b2 × (n/b)2 = n2 writes Communication cost: 2n3/b + 2n2 reads/writes << 2n3 arithmetic cost Making b as large possible: 3b2 ≤ M we achieve the following communication lower bound: 31/2n3/M1/2 + 2n2 or Ω (no. of FLOPs / M1/2) == Previous approaches for reducing communication == Most of the approaches investigated in the past to address this problem rely on scheduling or tuning techniques that aim at overlapping communication with computation. However, this approach can lead to an improvement of at most a factor of two. Ghosting is a different technique for reducing communication, in which a processor stores and computes redundantly data from neighboring processors for future computations. Cache-oblivious algorithms represent a different approach introduced in 1999 for fast Fourier transforms, and then extended to graph algorithms, dynamic programming, etc. They were also applied to several operations in linear algebra as dense LU and QR factorizations. The design of architecture specific algorithms is another approach that can be used for reducing the communication in parallel algorithms, and there are many examples in the literature of algorithms that are adapted to a given communication topology.

  Read more →
• 

  Audio inpainting

  Audio inpainting (also known as audio interpolation) is an audio restoration task which deals with the reconstruction of missing or corrupted portions of a digital audio signal. Inpainting techniques are employed when parts of the audio have been lost due to various factors such as transmission errors, data corruption or errors during recording. The goal of audio inpainting is to fill in the gaps (i.e., the missing portions) in the audio signal seamlessly, making the reconstructed portions indistinguishable from the original content and avoiding the introduction of audible distortions or alterations. Many techniques have been proposed to solve the audio inpainting problem and this is usually achieved by analyzing the temporal and spectral information surrounding each missing portion of the considered audio signal. Classic methods employ statistical models or digital signal processing algorithms to predict and synthesize the missing or damaged sections. Recent solutions, instead, take advantage of deep learning models, thanks to the growing trend of exploiting data-driven methods in the context of audio restoration. Depending on the extent of the lost information, the inpainting task can be divided in three categories. Short inpainting refers to the reconstruction of few milliseconds (approximately less than 10) of missing signal, that occurs in the case of short distortions such as clicks or clipping. In this case, the goal of the reconstruction is to recover the lost information exactly. In long inpainting instead, with gaps in the order of hundreds of milliseconds or even seconds, this goal becomes unrealistic, since restoration techniques cannot rely on local information. Therefore, besides providing a coherent reconstruction, the algorithms need to generate new information that has to be semantically compatible with the surrounding context (i.e., the audio signal surrounding the gaps). The case of medium duration gaps lays between short and long inpainting. It refers to the reconstruction of tens of millisecond of missing data, a scale where the non-stationary characteristic of audio already becomes important. == Definition == Consider a digital audio signal x {\displaystyle \mathbf {x} } . A corrupted version of x {\displaystyle \mathbf {x} } , which is the audio signal presenting missing gaps to be reconstructed, can be defined as x ~ = m ∘ x {\displaystyle \mathbf {\tilde {x}} =\mathbf {m} \circ \mathbf {x} } , where m {\displaystyle \mathbf {m} } is a binary mask encoding the reliable or missing samples of x {\displaystyle \mathbf {x} } , and ∘ {\displaystyle \circ } represents the element-wise product. Audio inpainting aims at finding x ^ {\displaystyle \mathbf {\hat {x}} } (i.e., the reconstruction), which is an estimation of x {\displaystyle \mathbf {x} } . This is an ill-posed inverse problem, which is characterized by a non-unique set of solutions. For this reason, similarly to the formulation used for the inpainting problem in other domains, the reconstructed audio signal can be found through an optimization problem that is formally expressed as x ^ ∗ = argmin X ^ L ( m ∘ x ^ , x ~ ) + R ( x ^ ) {\displaystyle \mathbf {\hat {x}} ^{}={\underset {\hat {\mathbf {X} }}{\text{argmin}}}~L(\mathbf {m} \circ \mathbf {\hat {x}} ,\mathbf {\tilde {x}} )+R(\mathbf {\hat {x}} )} . In particular, x ^ ∗ {\displaystyle \mathbf {\hat {x}} ^{}} is the optimal reconstructed audio signal and L {\displaystyle L} is a distance measure term that computes the reconstruction accuracy between the corrupted audio signal and the estimated one. For example, this term can be expressed with a mean squared error or similar metrics. Since L {\displaystyle L} is computed only on the reliable frames, there are many solutions that can minimize L ( m ∘ x ^ , x ~ ) {\displaystyle L(\mathbf {m} \circ \mathbf {\hat {x}} ,\mathbf {\tilde {x}} )} . It is thus necessary to add a constraint to the minimization, in order to restrict the results only to the valid solutions. This is expressed through the regularization term R {\displaystyle R} that is computed on the reconstructed audio signal x ^ {\displaystyle \mathbf {\hat {x}} } . This term encodes some kind of a-priori information on the audio data. For example, R {\displaystyle R} can express assumptions on the stationarity of the signal, on the sparsity of its representation or can be learned from data. == Techniques == There exist various techniques to perform audio inpainting. These can vary significantly, influenced by factors such as the specific application requirements, the length of the gaps and the available data. In the literature, these techniques are broadly divided in model-based techniques (sometimes also referred as signal processing techniques) and data-driven techniques. === Model-based techniques === Model-based techniques involve the exploitation of mathematical models or assumptions about the underlying structure of the audio signal. These models can be based on prior knowledge of the audio content or statistical properties observed in the data. By leveraging these models, missing or corrupted portions of the audio signal can be inferred or estimated. An example of a model-based techniques are autoregressive models. These methods interpolate or extrapolate the missing samples based on the neighboring values, by using mathematical functions to approximate the missing data. In particular, in autoregressive models the missing samples are completed through linear prediction. The autoregressive coefficients necessary for this prediction are learned from the surrounding audio data, specifically from the data adjacent to each gap. Some more recent techniques approach audio inpainting by representing audio signals as sparse linear combinations of a limited number of basis functions (as for example in the Short Time Fourier Transform). In this context, the aim is to find the sparse representation of the missing section of the signal that most accurately matches the surrounding, unaffected signal. The aforementioned methods exhibit optimal performance when applied to filling in relatively short gaps, lasting only a few tens of milliseconds, and thus they can be included in the context of short inpainting. However, these signal-processing techniques tend to struggle when dealing with longer gaps. The reason behind this limitation lies in the violation of the stationarity condition, as the signal often undergoes significant changes after the gap, making it substantially different from the signal preceding the gap. As a way to overcome these limitations, some approaches add strong assumptions also about the fundamental structure of the gap itself, exploiting sinusoidal modeling or similarity graphs to perform inpainting of longer missing portions of audio signals. === Data-driven techniques === Data-driven techniques rely on the analysis and exploitation of the available audio data. These techniques often employ deep learning algorithms that learn patterns and relationships directly from the provided data. They involve training models on large datasets of audio examples, allowing them to capture the statistical regularities present in the audio signals. Once trained, these models can be used to generate missing portions of the audio signal based on the learned representations, without being restricted by stationarity assumptions. Data-driven techniques also offer the advantage of adaptability and flexibility, as they can learn from diverse audio datasets and potentially handle complex inpainting scenarios. As of today, such techniques constitute the state-of-the-art of audio inpainting, being able to reconstruct gaps of hundreds of milliseconds or even seconds. These performances are made possible by the use of generative models that have the capability to generate novel content to fill in the missing portions. For example, generative adversarial networks, which are the state-of-the-art of generative models in many areas, rely on two competing neural networks trained simultaneously in a two-player minmax game: the generator produces new data from samples of a random variable, the discriminator attempts to distinguish between generated and real data. During the training, the generator's objective is to fool the discriminator, while the discriminator attempts to learn to better classify real and fake data. In GAN-based inpainting methods the generator acts as a context encoder and produces a plausible completion for the gap only given the available information surrounding it. The discriminator is used to train the generator and tests the consistency of the produced inpainted audio. Recently, also diffusion models have established themselves as the state-of-the-art of generative models in many fields, often beating even GAN-based solutions. For this reason they have also been used to solve the audio inpainting problem, obtaining valid results. These models generate new data instances by inverting the

  Read more →
• 

  Token-based replay

  Token-based replay technique is a conformance checking algorithm that checks how well a process conforms with its model by replaying each trace on the model (in Petri net notation ). Using the four counters produced tokens, consumed tokens, missing tokens, and remaining tokens, it records the situations where a transition is forced to fire and the remaining tokens after the replay ends. Based on the count at each counter, we can compute the fitness value between the trace and the model. == The algorithm == Source: The token-replay technique uses four counters to keep track of a trace during the replaying: p: Produced tokens c: Consumed tokens m: Missing tokens (consumed while not there) r: Remaining tokens (produced but not consumed) Invariants: At any time: p + m ≥ c ≥ m {\displaystyle p+m\geq c\geq m} At the end: r = p + m − c {\displaystyle r=p+m-c} At the beginning, a token is produced for the source place (p = 1) and at the end, a token is consumed from the sink place (c' = c + 1). When the replay ends, the fitness value can be computed as follows: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})} == Example == Suppose there is a process model in Petri net notation as follows: === Example 1: Replay the trace (a, b, c, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity c {\displaystyle \mathbf {c} } consumes 1 token and produces 1 token ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} and c = 2 + 1 = 3 {\displaystyle c=2+1=3} ). Step 5: The activity d {\displaystyle \mathbf {d} } consumes 2 tokens and produces 1 token ( p = 5 + 1 = 6 {\displaystyle p=5+1=6} , c = 3 + 2 = 5 {\displaystyle c=3+2=5} ). Step 6: The token at the end place is consumed ( c = 5 + 1 = 6 {\displaystyle c=5+1=6} ). The trace is complete. The fitness of the trace ( a , b , c , d {\displaystyle \mathbf {a,b,c,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 0 6 ) + 1 2 ( 1 − 0 6 ) = 1 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {0}{6}})+{\frac {1}{2}}(1-{\frac {0}{6}})=1} === Example 2: Replay the trace (a, b, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity d {\displaystyle \mathbf {d} } needs to be fired but there are not enough tokens. One artificial token was produced and the missing token counter is increased by one ( m = 1 {\displaystyle m=1} ). The artificial token and the token at place [ b , d ] {\displaystyle [\mathbf {b,d} ]} are consumed ( c = 2 + 2 = 4 {\displaystyle c=2+2=4} ) and one token is produced at place end ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} ). Step 5: The token in the end place is consumed ( c = 4 + 1 = 5 {\displaystyle c=4+1=5} ). The trace is complete. There is one remaining token at place [ a , c ] {\displaystyle [\mathbf {a,c} ]} ( r = 1 {\displaystyle r=1} ). The fitness of the trace ( a , b , d {\displaystyle \mathbf {a,b,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 1 5 ) + 1 2 ( 1 − 1 5 ) = 0.8 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {1}{5}})+{\frac {1}{2}}(1-{\frac {1}{5}})=0.8}

  Read more →
• 

  Uncertain database

  An uncertain database is a kind of database studied in database theory. The goal of uncertain databases is to manage information on which there is some uncertainty. Uncertain databases make it possible to explicitly represent and manage uncertainty on the data, usually in a succinct way. == Formal definition == At the basis of uncertain databases is the notion of possible world. Specifically, a possible world of an uncertain database is a (certain) database which is one of the possible realizations of the uncertain database. A given uncertain database typically has more than one, and potentially infinitely many, possible worlds. A formalism to represent uncertain databases then explains how to succinctly represent a set of possible worlds into one uncertain database. == Types of uncertain databases == Uncertain database models differ in how they represent and quantify these possible worlds: Incomplete databases are a compact representation of the set of possible worlds – the use of NULL in SQL, arguably the most commonplace instantiation of uncertain databases, is an example of incomplete database model. Probabilistic databases are a compact representation of a probability distribution over the set of possible worlds. Fuzzy databases are a compact representation of a fuzzy set of the possible worlds. Though mostly studied in the relational setting, uncertain database models can also be defined in other relational models such as graph databases or XML databases. === Incomplete database === The most common database model is the relational model. Multiple incomplete database models have been defined over the relational model, that form extensions to the relational algebra. These have been called Imieliński–Lipski algebras: Relations with NULL values, also called Codd tables c-tables v-tables === Example === The following table is a relation of an incomplete database, described in the formalism of NULL values: There are infinitely many possible worlds for this incomplete database, obtained by replacing the "NULL" values with concrete values. For instance, the following relation is a possible world:

  Read more →