AI Code Breaker

AI Code Breaker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Audio mining

  Audio mining is a technique by which the content of an audio signal can be automatically analyzed and searched. It is most commonly used in the field of automatic speech recognition, where the analysis tries to identify any speech within the audio. The term audio mining is sometimes used interchangeably with audio indexing, phonetic searching, phonetic indexing, speech indexing, audio analytics, speech analytics, word spotting, and information retrieval. Audio indexing, however, is mostly used to describe the pre-process of audio mining, in which the audio file is broken down into a searchable index of words. == History == Academic research on audio mining began in the late 1970s in schools like Carnegie Mellon University, Columbia University, the Georgia Institute of Technology, and the University of Texas. Audio data indexing and retrieval began to receive attention and demand in the early 1990s, when multimedia content started to develop and the volume of audio content significantly increased. Before audio mining became the mainstream method, written transcripts of audio content were created and manually analyzed. == Process == Audio mining is typically split into four components: audio indexing, speech processing and recognition systems, feature extraction and audio classification. The audio will typically be processed by a speech recognition system in order to identify word or phoneme units that are likely to occur in the spoken content. This information may either be used immediately in pre-defined searches for keywords or phrases (a real-time "word spotting" system), or the output of the speech recognizer may be stored in an index file. One or more audio mining index files can then be loaded at a later date in order to run searches for keywords or phrases. The results of a search will normally be in terms of hits, which are regions within files that are good matches for the chosen keywords. The user may then be able to listen to the audio corresponding to these hits in order to verify if a correct match was found. === Audio Indexing === In audio, there is the main problem of information retrieval - there is a need to locate the text documents that contain the search key. Unlike humans, a computer is not able to distinguish between the different types of audios such as speed, mood, noise, music or human speech - an effective searching method is needed. Hence, audio indexing allows efficient search for information by analyzing an entire file using speech recognition. An index of content is then produced, bearing words and their locations done through content-based audio retrieval, focusing on extracted audio features. It is done through mainly two methods: Large Vocabulary Continuous Speech Recognition (LVCSR) and Phonetic-based Indexing. ==== Large Vocabulary Continuous Speech Recognizers (LVCSR) ==== In text-based indexing or large vocabulary continuous speech recognition (LVCSR), the audio file is first broken down into recognizable phonemes. It is then run through a dictionary that can contain several hundred thousand entries and matched with words and phrases to produce a full text transcript. A user can then simply search a desired word term and the relevant portion of the audio content will be returned. If the text or word could not be found in the dictionary, the system will choose the next most similar entry it can find. The system uses a language understanding model to create a confidence level for its matches. If the confidence level be below 100 percent, the system will provide options of all the found matches. ===== Advantages and disadvantages ===== The main draw of LVCSR is its high accuracy and high searching speed. In LVCSR, statistical methods are used to predict the likelihood of different word sequences, hence the accuracy is much higher than the single word lookup of a phonetic search. If the word can be found, the probability of the word spoken is very high. Meanwhile, while initial processing of audio takes a fair bit of time, searching is quick as just a simple test to text matching is needed. On the other hand, LVCSR is susceptible to common issues of speech recognition. The inherent random nature of audio and problems of external noise all affect the accuracies of text-based indexing. Another problem with LVCSR is its over reliance on its dictionary database. LVCSR only recognizes words that are found in their dictionary databases, and these dictionaries and databases are unable to keep up with the constant evolving of new terminology, names and words. Should the dictionary not contain a word, there is no way for the system to identify or predict it. This reduces the accuracy and reliability of the system. This is named the Out-of-vocabulary (OOV) problem. Audio mining systems try to cope with OOV by continuously updating the dictionary and language model used, but the problem still remains significant and has probed a search for alternatives. Additionally, due to the need to constantly update and maintain task-based knowledge and large training databases to cope with the OOV problem, high computational costs are incurred. This makes LVCSR an expensive approach to audio mining. ==== Phonetic-based Indexing ==== Phonetic-based indexing also breaks the audio file into recognizable phonemes, but instead of converting them to a text index, they are kept as they are and analyzed to create a phonetic-based index. The process of phonetic-based indexing can be split into two phases. The first phase is indexing. It begins by converting the input media into a standard audio representation format (PCM). Then, an acoustic model is applied to the speech. This acoustic model represents characteristics of both an acoustic channel (an environment in which the speech was uttered and a transducer through which it was recorded) and a natural language (in which human beings expressed the input speech). This produces a corresponding phonetic search track, or phonetic audio track (PAT), a highly compressed representation of the phonetic content of the input media. The second phase is searching. The user's search query term is parsed into a possible phoneme string using a phonetic dictionary. Then, multiple PAT files can be scanned at high speed during a single search for likely phonetic sequences that closely match corresponding strings of phonemes in the query term. ===== Advantages and disadvantages ===== Phonetic indexing is most attractive as it is largely unaffected by linguistic issues such as unrecognized words and spelling errors. Phonetic preprocessing maintains an open vocabulary that does not require updating. That makes it particularly useful for searching specialized terminology or words in foreign languages that do not commonly appear in dictionaries. It is also more effective for searching audio files with disruptive background noise and/or unclear utterances as it can compile results based on the sounds it can discern, and should the user wish to, they can search through the options until they find the desired item. Furthermore, in contrast to LVCSR, it can process audio files very quickly as there are very few unique phonemes between languages. However, phonemes cannot be effectively indexed like an entire word, thus searching on a phonetic-based system is slow. An issue with phonetic indexing is its low accuracy. Phoneme-based searches result in more false matches than text-based indexing. This is especially prevalent for short search terms, which have a stronger likelihood of sounding similar to other words or being part of bigger words. It could also return irrelevant results from other languages. Unless the system recognizes exactly the entire word, or understands phonetic sequences of languages, it is difficult for phonetic-based indexing to return accurate findings. === Speech processing and recognition system === Deemed as the most critical and complex component of audio mining, speech recognition requires the knowledge of human speech production system and its modeling. To correspond the Human speech production system, the electrical speech production system is developed to consist of: Speech generation Speech perception Voiced & unvoiced speech Model of human speech The electrical speech production system converts acoustic signal into corresponding representation of the spoken through the acoustic models in their software where all phonemes are represented. A statistical language model aids in the process by identifying how likely words are to follow each other in certain languages. Put together with a complex probability analysis, the speech recognition system is capable of taking an unknown speech signal and transcribing it into words based on the program's dictionary. ASR (automatic speech recognition) system includes: Acoustic analysis: input sound waveform is transformed into a feature Acoustic model: establishes relationship between speech signal and phonemes, pronunciation model and lang

  Read more →
• 

  Hardware random number generator

  In computing, a hardware random number generator (HRNG), true random number generator (TRNG), non-deterministic random bit generator (NRBG), or physical random number generator is a device that generates random numbers from a physical process capable of producing entropy, unlike a pseudorandom number generator (PRNG) that utilizes a deterministic algorithm and non-physical nondeterministic random bit generators that do not include hardware dedicated to generation of entropy. Many natural phenomena generate low-level, statistically random "noise" signals, including thermal and shot noise, jitter and metastability of electronic circuits, Brownian motion, and atmospheric noise. Researchers also used the photoelectric effect, involving a beam splitter, other quantum phenomena, and even nuclear decay (due to practical considerations the latter, as well as the atmospheric noise, is not viable except for fairly restricted applications or online distribution services). While "classical" (non-quantum) phenomena are not truly random, an unpredictable physical system is usually acceptable as a source of randomness, so the qualifiers "true" and "physical" are used interchangeably. A hardware random number generator is expected to output near-perfect random numbers ("full entropy"). A physical process usually does not have this property, and a practical TRNG typically includes a few blocks: a noise source that implements the physical process producing the entropy. Usually this process is analog, so a digitizer is used to convert the output of the analog source into a binary representation; a conditioner (randomness extractor) that improves the quality of the random bits; health tests. TRNGs are mostly used in cryptographical algorithms that get completely broken if the random numbers have low entropy, so the testing functionality is usually included. Hardware random number generators generally produce only a limited number of random bits per second. In order to increase the available output data rate, they are often used to generate the "seed" for a faster PRNG. PRNG also helps with the noise source "anonymization" (whitening out the noise source identifying characteristics) and entropy extraction. With a proper PRNG algorithm selected (cryptographically secure pseudorandom number generator, CSPRNG), the combination can satisfy the requirements of Federal Information Processing Standards and Common Criteria standards. == Uses == Hardware random number generators can be used in any application that needs randomness. However, in many scientific applications additional cost and complexity of a TRNG (when compared with pseudo random number generators) provide no meaningful benefits. TRNGs have additional drawbacks for data science and statistical applications: impossibility to re-run a series of numbers unless they are stored, reliance on an analog physical entity can obscure the failure of the source. The TRNGs therefore are primarily used in the applications where their unpredictability and the impossibility to re-run the sequence of numbers are crucial to the success of the implementation: in cryptography and gambling machines. === Cryptography === The major use for hardware random number generators is in the field of data encryption, for example to create random cryptographic keys and nonces needed to encrypt and sign data. In addition to randomness, there are at least two additional requirements imposed by the cryptographic applications: forward secrecy guarantees that the knowledge of the past output and internal state of the device should not enable the attacker to predict future data; backward secrecy protects the "opposite direction": knowledge of the output and internal state in the future should not divulge the preceding data. A typical way to fulfill these requirements is to use a TRNG to seed a cryptographically secure pseudorandom number generator. == History == Physical devices were used to generate random numbers for thousands of years, primarily for gambling. Dice in particular have been known for more than 5000 years (found on locations in modern Iraq and Iran), and flipping a coin (thus producing a random bit) dates at least to the times of ancient Rome. The first documented use of a physical random number generator for scientific purposes was by Francis Galton (1890). He devised a way to sample a probability distribution using a common gambling die. In addition to the top digit, Galton also looked at the face of a die closest to him, thus creating 64 = 24 outcomes (about 4.6 bits of randomness). Kendall and Babington-Smith (1938) used a fast-rotating 10-sector disk that was illuminated by periodic bursts of light. The sampling was done by a human who wrote the number under the light beam onto a pad. The device was utilized to produce a 100,000-digit random number table (at the time such tables were used for statistical experiments, like PRNG nowadays). On 29 April 1947, the RAND Corporation began generating random digits with an "electronic roulette wheel", consisting of a random frequency pulse source of about 100,000 pulses per second gated once per second with a constant frequency pulse and fed into a five-bit binary counter. Douglas Aircraft built the equipment, implementing Cecil Hasting's suggestion (RAND P-113) for a noise source (most likely the well known behavior of the 6D4 miniature gas thyratron tube, when placed in a magnetic field). Twenty of the 32 possible counter values were mapped onto the 10 decimal digits and the other 12 counter values were discarded. The results of a long run from the RAND machine, filtered and tested, were converted into a table, which originally existed only as a deck of punched cards, but was later published in 1955 as a book, 50 rows of 50 digits on each page (A Million Random Digits with 100,000 Normal Deviates). The RAND table was a significant breakthrough in delivering random numbers because such a large and carefully prepared table had never before been available. It has been a useful source for simulations, modeling, and for deriving the arbitrary constants in cryptographic algorithms to demonstrate that the constants had not been selected maliciously ("nothing up my sleeve numbers"). Since the early 1950s, research into TRNGs has been highly active, with thousands of research works published and about 2000 patents granted by 2017. == Physical phenomena with random properties == Multiple different TRNG designs were proposed over time with a large variety of noise sources and digitization techniques ("harvesting"). However, practical considerations (size, power, cost, performance, robustness) dictate the following desirable traits: use of a commonly available inexpensive silicon process; exclusive use of digital design techniques. This allows an easier system-on-chip integration and enables the use of FPGAs; compact and low-power design. This discourages use of analog components (e.g., amplifiers); mathematical justification of the entropy collection mechanisms. Stipčević & Koç in 2014 classified the physical phenomena used to implement TRNG into four groups: electrical noise; free-running oscillators; chaos; quantum effects. === Electrical noise-based RNG === Noise-based RNGs generally follow the same outline: the source of a noise generator is fed into a comparator. If the voltage is above threshold, the comparator output is 1, otherwise 0. The random bit value is latched using a flip-flop. Sources of noise vary and include: Johnson–Nyquist noise ("thermal noise"); Zener noise; avalanche breakdown. The drawbacks of using noise sources for an RNG design are: noise levels are hard to control, they vary with environmental changes and device-to-device; calibration processes needed to ensure a guaranteed amount of entropy are time-consuming; noise levels are typically low, thus the design requires power-hungry amplifiers. The sensitivity of amplifier inputs enables manipulation by an attacker; circuitry located nearby generates a lot of non-random noise thus lowering the entropy; a proof of randomness is near-impossible as multiple interacting physical processes are involved. === Chaos-based RNG === The idea of chaos-based noise stems from the use of a complex system that is hard to characterize by observing its behavior over time. For example, lasers can be put into (undesirable in other applications) chaos mode with chaotically fluctuating power, with power detected using a photodiode and sampled by a comparator. The design can be quite small, as all photonics elements can be integrated on-chip. Stipčević & Koç characterize this technique as "most objectionable", mostly due to the fact that chaotic behavior is usually controlled by a differential equation and no new randomness is introduced, thus there is a possibility of the chaos-based TRNG producing a limited subset of possible output strings. === Free-running oscillators-based RNG === The TRNGs based on a free-running oscilla

  Read more →
• 

  Data profiling

  Data profiling is the process of examining the data available from an existing information source (e.g. a database or a file) and collecting statistics or informative summaries about that data. The purpose of these statistics may be to: Find out whether existing data can be easily used for other purposes Improve the ability to search data by tagging it with keywords, descriptions, or assigning it to a category Assess data quality, including whether the data conforms to particular standards or patterns Assess the risk involved in integrating data in new applications, including the challenges of joins Discover metadata of the source database, including value patterns and distributions, key candidates, foreign-key candidates, and functional dependencies Assess whether known metadata accurately describes the actual values in the source database Understanding data challenges early in any data intensive project, so that late project surprises are avoided. Finding data problems late in the project can lead to delays and cost overruns. Have an enterprise view of all data, for uses such as master data management, where key data is needed, or data governance for improving data quality. == Introduction == Data profiling refers to the analysis of information for use in a data warehouse in order to clarify the structure, content, relationships, and derivation rules of the data. Profiling helps to not only understand anomalies and assess data quality, but also to discover, register, and assess enterprise metadata. The result of the analysis is used to determine the suitability of the candidate source systems, usually giving the basis for an early go/no-go decision, and also to identify problems for later solution design. == How data profiling is conducted == Data profiling utilizes methods of descriptive statistics such as minimum, maximum, mean, mode, percentile, standard deviation, frequency, variation, aggregates such as count and sum, and additional metadata information obtained during data profiling such as data type, length, discrete values, uniqueness, occurrence of null values, typical string patterns, and abstract type recognition. The metadata can then be used to discover problems such as illegal values, misspellings, missing values, varying value representation, and duplicates. Different analyses are performed for different structural levels. E.g. single columns could be profiled individually to get an understanding of frequency distribution of different values, type, and use of each column. Embedded value dependencies can be exposed in a cross-columns analysis. Finally, overlapping value sets possibly representing foreign key relationships between entities can be explored in an inter-table analysis. Normally, purpose-built tools are used for data profiling to ease the process. The computational complexity increases when going from single column, to single table, to cross-table structural profiling. Therefore, performance is an evaluation criterion for profiling tools. == When is data profiling conducted? == According to Kimball, data profiling is performed several times and with varying intensity throughout the data warehouse developing process. A light profiling assessment should be undertaken immediately after candidate source systems have been identified and DW/BI business requirements have been satisfied. The purpose of this initial analysis is to clarify at an early stage if the correct data is available at the appropriate detail level and that anomalies can be handled subsequently. If this is not the case the project may be terminated. Additionally, more in-depth profiling is done prior to the dimensional modeling process in order assess what is required to convert data into a dimensional model. Detailed profiling extends into the ETL system design process in order to determine the appropriate data to extract and which filters to apply to the data set. Additionally, data profiling may be conducted in the data warehouse development process after data has been loaded into staging, the data marts, etc. Conducting data at these stages helps ensure that data cleaning and transformations have been done correctly and in compliance of requirements. == Benefits and examples == Data profiling can improve data quality, shorten the implementation cycle of major projects, and improve users' understanding of data. Discovering business knowledge embedded in data itself is one of the significant benefits derived from data profiling. It can improve data accuracy in corporate databases.

  Read more →
• 

  Data preservation

  Data preservation is the act of conserving and maintaining both the safety and integrity of data. Preservation is done through formal activities that are governed by policies, regulations and strategies directed towards protecting and prolonging the existence and authenticity of data and its metadata. Data can be described as the elements or units in which knowledge and information is created, and metadata are the summarizing subsets of the elements of data; or the data about the data. The main goal of data preservation is to protect data from being lost or destroyed and to contribute to the reuse and progression of the data. == History == Most historical data collected over time has been lost or destroyed. War and natural disasters combined with the lack of materials and necessary practices to preserve and protect data has caused this. Usually, only the most important data sets were saved, such as government records and statistics, legal contracts and economic transactions. Scientific research and doctoral theses data have mostly been destroyed from improper storage and lack of data preservation awareness and execution. Over time, data preservation has evolved and has generated importance and awareness. We now have many different ways to preserve data and many different important organizations involved in doing so. The first digital data preservation storage solutions appeared in the 1950s, which were usually flat or hierarchically structured. While there were still issues with these solutions, it made storing data much cheaper, and more easily accessible. In the 1970s relational databases as well as spreadsheets appeared. Relational data bases structure data into tables using structured query languages which made them more efficient than the preceding storage solutions, and spreadsheets hold high volumes of numeric data which can be applied to these relational databases to produce derivative data. More recently, non-relational (non-structured query language) databases have appeared as complements to relational databases which hold high volumes of unstructured or semi-structured data. == Importance == The scope of data preservation is vast. Everything from governmental to business records to art essentially can be represented as data, and is amenable to be lost. This then leads to loss of human history, for perpetuity. Data can be lost on a small or independent scale whether it's personal data loss, or data loss within businesses and organizations, as well as on a larger or national or global scale which can negatively and potentially permanently affect things such as environmental protection, medical research, homeland security, public health and safety, economic development and culture. The mechanisms of data loss are also as many as they are varied, spanning from disaster, wars, data breaches, negligence, all the way through simple forgetting to natural decay. Ways in which data collections can be used when preserved and stored properly can be seen through the U.S. Geological Survey, which stores data collections on natural hazards, natural resources, and landscapes. The data collected by the Survey is used by federal and state land management agencies towards land use planning and management, and continually needs access to historical reference data. == Related Concepts == In contrast, data holdings are collections of gathered data that are informally kept, and not necessarily prepared for long-term preservation. For example, a collection or back-up of personal files. Data holdings are generally the storage methods used in the past when data has been lost due to environmental and other historical disasters. Furthermore, data retention differs from data preservation in the sense that by definition, to retain an object (data) is to hold or keep possession or use of the object. To preserve an object is to protect, maintain and keep up for future use. Retention policies often circle around when data should be deleted on purpose as well, and held from public access, while preservation prioritizes permanence and more widely shared access. Thus, data preservation exceeds the concept of having or possessing data or back up copies of data. Data preservation ensures reliable access to data by including back-up and recovery mechanisms that precede the event of a disaster or technological change. == Methods == === Digital === Digital preservation, is similar to data preservation, but is mainly concerned with technological threats, and solely digital data. Essentially digital data is a set of formal activities to enable ongoing or persistent use and access of digital data exceeding the occurrence of technological malfunction or change. Digital preservation is aware of the inevitable change in technology and protocols, and prepares for data that will need to be accessible across new types of technologies and platforms while the integrity of the data and metadata are being conserved. Technology, while providing great process in conserving data that may not have been possible in the past, is also changing at such a quick rate that digital data may not be accessible anymore due to the format being incompatible with new software. Without the use of data preservation much of our existing digital data is at risk. The majority of methods used towards data preservation today are digital methods, which are so far the most effective methods that exist. === Archives === Archives are a collection of historical documents and records. Archives contribute and work towards the preservation of data by collecting data that is well organized, while providing the appropriate metadata to confirm it. An example of an important data archive is The LONI Image Data Archive, which is an archive that collects data regarding clinical trials and clinical research studies. === Catalogues, directories and portals === Catalogues, directories and portals are consolidated resources which are kept by individual institutions, and are associated with data archives and holdings. In other words, the data is not presented on the site, but instead might act as metadata and aggregators, and may administer thorough inventories. === Repositories === Repositories are places where data archives and holdings can be accessed and stored. The goal of repositories is to make sure that all requirements and protocols of archives and holdings are being met, and data is being certified to ensure data integrity and user trust. Single-site Repositories A repository that holds all data sets on a single site. An example of a major single-site repository the Data Archiving and Networking Services which is a repository which provides ongoing access to digital research resources for the Netherlands. Multi-Site Repositories A repository that hosts data set on multiple institutional sites. An example of a well known multi-site repository is OpenAIRE which is a repository that hosts research data and publications collaborating all of the EU countries and more. OpenAIRE promotes open scholarship and seeks to improves discover-ability and re-usability of data. Trusted Digital Repository A repository that seeks to provide reliable, trusted access over a long period of time. The repository can be single or multi-sited but must cooperate with the Reference Model for an Open Archival Information System, as well as adhere to a set of rules or attributes that contribute to its trust such as having persistent financial responsibility, organizational buoyancy, administrative responsibility security and safety. An example of a trusted digital repository is The Digital Repository of Ireland (DRI) which is a multi-site repository that hosts Ireland's humanity and social science data sets. === Cyber Infrastructures === Cyber infrastructures which consists of archive collections which are made available through the system of hardware, technologies, software, policies, services and tools. Cyber infrastructures are geared towards the sharing of data supporting peer-to-peer collaborations and a cultural community. An example of a major cyber-infrastructure is The Canadian Geo-spatial Data Infrastructure which provides access to spatial data in Canada.

  Read more →
• 

  Luxafor

  Luxafor () is a brand of office productivity tools designed to improve efficiency and communication in workplaces. The brands main product is LED status indicators for use in office settings. Luxafor is a product line under the company SIA Greynut, based in Riga, Latvia. == History == Luxafor was developed by the technology company SIA Greynut. The brand first gained attention through a Kickstarter campaign in 2015, which aimed to fund its initial product, the Luxafor Flag. Although the campaign was unsuccessful in reaching its funding goal, the product was still brought to market. In 2017, Luxafor launched another Kickstarter campaign for the Luxafor Bluetooth, a wireless version of its LED status indicator. This campaign also did not meet its funding goal, but like its predecessor, the product was still developed and released. Despite initial setbacks, Luxafor Bluetooth has become one of the brand's leading products. == Products == Luxafors main product range is LED status indicators, including: === Luxafor Flag === A USB-powered LED indicator that shows different colors to signal the user's availability. === Luxafor Bluetooth === A wireless LED indicator controlled via Bluetooth, integrating with productivity tools like Slack and Microsoft Teams. === Luxafor Switch === An advanced status indicator designed to manage room and workspace availability. === Other === Other Luxafor products include CO2 Dongle, Smart Button, Mute Button, Pomodoro Timer and others. == Features == Luxafor products are known for their customizable indicators, integration capabilities with IFTTT, Zapier, and remote control features. They are compatible with various operating systems, including Windows and macOS, and can be integrated with numerous communication and productivity platforms, like Microsoft Teams and Cisco Jabber.

  Read more →
• 

  Data lineage

  Data lineage refers to the process of tracking how data is generated, transformed, transmitted and used across systems over time. It documents data's origins, transformations and movements, providing detailed visibility into its life cycle. This process simplifies the identification of errors in data analytics workflows, by enabling users to trace issues back to their root causes. Data lineage facilitates the ability to replay specific segments or inputs of the dataflow. This can be used in debugging or regenerating lost outputs. In database systems, this concept is closely related to data provenance, which involves maintaining records of inputs, entities, systems and processes that influence data. Data provenance provides a historical record of data origins and transformations. It supports forensic activities such as data-dependency analysis, error/compromise detection, recovery, auditing and compliance analysis: "Lineage is a simple type of why provenance." Data governance plays a critical role in managing metadata by establishing guidelines, strategies and policies. Enhancing data lineage with data quality measures and master data management adds business value. Although data lineage is typically represented through a graphical user interface (GUI), the methods for gathering and exposing metadata to this interface can vary. Based on the metadata collection approach, data lineage can be categorized into three types: Those involving software packages for structured data, programming languages and Big data systems. Data lineage information includes technical metadata about data transformations. Enriched data lineage may include additional elements such as data quality test results, reference data, data models, business terminology, data stewardship information, program management details and enterprise systems associated with data points and transformations. Data lineage visualization tools often include masking features that allow users to focus on information relevant to specific use cases. To unify representations across disparate systems, metadata normalization or standardization may be required. == Representation of data lineage == Representation broadly depends on the scope of the metadata management and reference point of interest. Data lineage provides sources of the data and intermediate data flow hops from the reference point with backward data lineage, leading to the final destination's data points and its intermediate data flows with forward data lineage. These views can be combined with end-to-end lineage for a reference point that provides a complete audit trail of that data point of interest from sources to their final destinations. As the data points or hops increase, the complexity of such representation becomes incomprehensible. Thus, the best feature of the data lineage view is the ability to simplify the view by temporarily masking unwanted peripheral data points. Tools with the masking feature enable scalability of the view and enhance analysis with the best user experience for both technical and business users. Data lineage also enables companies to trace sources of specific business data to track errors, implement changes in processes and implementing system migrations to save significant amounts of time and resources. Data lineage can improve efficiency in business intelligence BI processes. Data lineage can be represented visually to discover the data flow and movement from its source to destination via various changes and hops on its way in the enterprise environment. This includes how the data is transformed along the way, how the representation and parameters change and how the data splits or converges after each hop. A simple representation of the Data Lineage can be shown with dots and lines, where dots represent data containers for data points, and lines connecting them represent transformations the data undergoes between the data containers. Data lineage can be visualized at various levels based on the granularity of the view. At a very high-level, data lineage is visualized as systems that the data interacts with before it reaches its destination. At its most granular, visualizations at the data point level can provide the details of the data point and its historical behavior, attribute properties and trends and data quality of the data passed through that specific data point in the data lineage. The scope of the data lineage determines the volume of metadata required to represent its data lineage. Usually, data governance and data management of an organization determine the scope of the data lineage based on their regulations, enterprise data management strategy, data impact, reporting attributes and critical data elements of the organization. == Rationale == Distributed systems like Google Map Reduce, Microsoft Dryad, Apache Hadoop (an open-source project) and Google Pregel provide such platforms for businesses and users. However, even with these systems, Big Data analytics can take several hours, days or weeks to run, simply due to the data volumes involved. For example, a ratings prediction algorithm for the Netflix Prize challenge took nearly 20 hours to execute on 50 cores, and a large-scale image processing task to estimate geographic information took 3 days to complete using 400 cores. "The Large Synoptic Survey Telescope is expected to generate terabytes of data every night and eventually store more than 50 petabytes, while in the bioinformatics sector, the 12 largest genome sequencing houses in the world now store petabytes of data apiece. It is very difficult for a data scientist to trace an unknown or an unanticipated result. === Big data debugging === Big data analytics is the process of examining large data sets to uncover hidden patterns, unknown correlations, market trends, customer preferences and other useful business information. Machine learning, among other algorithms, is used to transform and analyze the data. Due to the large size of the data, there could be unknown features in the data. The massive scale and unstructured nature of data, the complexity of these analytics pipelines, and long runtimes pose significant manageability and debugging challenges. Even a single error in these analytics can be extremely difficult to identify and remove. While one may debug them by re-running the entire analytics through a debugger for stepwise debugging, this can be expensive due to the amount of time and resources needed. Auditing and data validation are other major problems due to the growing ease of access to relevant data sources for use in experiments, the sharing of data between scientific communities and use of third-party data in business enterprises. As such, more cost-efficient ways of analyzing data intensive scale-able computing (DISC) are crucial to their continued effective use. === Challenges in Big Data debugging === ==== Massive scale ==== According to an EMC/IDC study, 2.8 ZB of data were created and replicated in 2012. Furthermore, the same study states that the digital universe will double every two years between now and 2020, and that there will be approximately 5.2 TB of data for every person in 2020. Based on current technology, the storage of this much data will mean greater energy usage by data centers. ==== Unstructured data ==== Unstructured data usually refers to information that doesn't reside in a traditional row-column database. Unstructured data files often include text and multimedia content, such as e-mail messages, word processing documents, videos, photos, audio files, presentations, web pages and many other kinds of business documents. While these types of files may have an internal structure, they are still considered "unstructured" because the data they contain doesn't fit neatly into a database. The amount of unstructured data in enterprises is growing many times faster than structured databases are growing. Big data can include both structured and unstructured data, but IDC estimates that 90 percent of Big Data is unstructured data. The fundamental challenge of unstructured data sources is that they are difficult for non-technical business users and data analysts alike to unbox, understand and prepare for analytic use. Beyond issues of structure, the sheer volume of this type of data contributes to such difficulty. Because of this, current data mining techniques often leave out valuable information and make analyzing unstructured data laborious and expensive. In today's competitive business environment, companies have to find and analyze the relevant data they need quickly. The challenge is going through the volumes of data and accessing the level of detail needed, all at a high speed. The challenge only grows as the degree of granularity increases. One possible solution is hardware. Some vendors are using increased memory and parallel processing to crunch large volumes of data quickly. Another method is putting data in-memory but using a grid

  Read more →
• 

  Data analysis

  Data analysis is the process of inspecting, cleansing, transforming, and modeling data with the goal of discovering useful information, informing conclusions, and supporting decision-making. Data analysis has multiple facets and approaches, encompassing diverse techniques under a variety of names, and is used in different business, science, and social science domains. In today's business world, data analysis plays an important role in making decisions more scientific and helping businesses operate more effectively. It is widely used in fields such as business analytics, healthcare, and artificial intelligence to extract meaningful insights from data. Data mining is a particular data analysis technique that focuses on statistical modeling and knowledge discovery for predictive rather than purely descriptive purposes, while business intelligence covers data analysis that relies heavily on aggregation, focusing mainly on business information. In statistical applications, data analysis can be divided into descriptive statistics, exploratory data analysis (EDA), and confirmatory data analysis (CDA). EDA focuses on discovering new features in the data, while CDA focuses on confirming or falsifying existing hypotheses. Predictive analytics focuses on the application of statistical models for predictive forecasting or classification, while text analytics applies statistical, linguistic, and structural techniques to extract and classify information from textual sources, a variety of unstructured data. All of the above are varieties of data analysis. == Data analysis process == Data analysis is a process for obtaining raw data, and subsequently converting it into information useful for decision-making by users. Statistician John Tukey, defined data analysis in 1961, as:"Procedures for analyzing data, techniques for interpreting the results of such procedures, ways of planning the gathering of data to make its analysis easier, more precise or more accurate, and all the machinery and results of (mathematical) statistics which apply to analyzing data." There are several phases, and they are iterative, in that feedback from later phases may result in additional work in earlier phases. === Data requirements === The data is necessary as inputs to the analysis, which is specified based upon the requirements of those directing the analytics (or customers, who will use the finished product of the analysis). The general type of entity upon which the data will be collected is referred to as an experimental unit (e.g., a person or population of people). Specific variables regarding a population (e.g., age and income) may be specified and obtained. Data may be numerical or categorical (i.e., a text label for numbers). === Data collection === Data may be collected from a variety of sources. A list of data sources are available for study & research. The requirements may be communicated by analysts to custodians of the data; such as, Information Technology personnel within an organization. Data collection or data gathering is the process of gathering and measuring information on targeted variables in an established system, which then enables one to answer relevant questions and evaluate outcomes. The data may also be collected from sensors in the environment, including traffic cameras, satellites, recording devices, etc. It may also be obtained through interviews, downloads from online sources, or reading documentation. === Data processing === Data integration is a precursor to data analysis: Data, when initially obtained, must be processed or organized for analysis. For instance, this may involve placing data into rows and columns in a table format (known as structured data) for further analysis, often through the use of spreadsheet (e.g. Excel) or statistical software. === Data cleaning === Once processed and organized, the data may be incomplete, contain duplicates, or contain errors. The need for data cleaning will arise from problems in the way that the data is entered and stored. Data cleaning is the process of preventing and correcting these errors. Common tasks include record matching, identifying inaccuracy of data, overall quality of existing data, deduplication, and column segmentation. Such data problems can also be identified through a variety of analytical techniques. For example; with financial information, the totals for particular variables may be compared against separately published numbers that are believed to be reliable. Unusual amounts, above or below predetermined thresholds, may also be reviewed. There are several types of data cleaning that are dependent upon the type of data in the set; this could be phone numbers, email addresses, employers, or other values. Quantitative data methods for outlier detection can be used to get rid of data that appears to have a higher likelihood of being input incorrectly. Text data spell checkers can be used to lessen the amount of mistyped words. However, it is harder to tell if the words are contextually (i.e., semantically and idiomatically) correct. === Exploratory data analysis === Once the datasets are cleaned, they can then begin to be analyzed using exploratory data analysis. The process of data exploration may result in additional data cleaning or additional requests for data; thus, the initialization of the iterative phases mentioned above. Descriptive statistics, such as the average, median, and standard deviation, are often used to broadly characterize the data. Data visualization is also used, in which the analyst is able to examine the data in a graphical format in order to obtain additional insights about messages within the data. === Modeling and algorithms === Mathematical formulas or mathematical models (supported by algorithms) may be applied to the data in order to identify relationships among the variables; for example, checking for correlation and by determining whether or not there is the presence of causality. In general terms, models may be developed to evaluate a specific variable based on other variable(s) contained within the dataset, with some residual error depending on the implemented model's accuracy (e.g., Data = Model + Error). Inferential statistics utilizes techniques that measure the relationships between particular variables. For example, regression analysis may be used to model whether a change in advertising (independent variable X), provides an explanation for the variation in sales (dependent variable Y), i.e. is Y a function of X? This can be described as (Y = aX + b + error), where the model is designed such that (a) and (b) minimize the error when the model predicts Y for a given range of values of X. === Data product === A data product is a computer application that takes data inputs and generates outputs, feeding them back into the environment. It may be based on a model or algorithm. For instance, an application that analyzes data about customer purchase history, and uses the results to recommend other purchases the customer might enjoy. === Communication === Once data is analyzed, it may be presented in many formats to the users of the analysis to support their requirements. The users may have feedback, which results in additional analysis. When determining how to communicate the results, the analyst may consider implementing a variety of data visualization techniques to help communicate the message more clearly and efficiently to the audience. Data visualization uses information displays (graphics such as, tables and charts) to help communicate key messages contained in the data. Tables are a valuable tool by enabling the ability of a user to query and focus on specific numbers; while charts (e.g., bar charts or line charts), may help explain the quantitative messages contained in the data. == Quantitative messages == Stephen Few described eight types of quantitative messages that users may attempt to communicate from a set of data, including the associated graphs. Time-series: A single variable is captured over a period of time, such as the unemployment rate over a 10-year period. A line chart may be used to demonstrate the trend. Ranking: Categorical subdivisions are ranked in ascending or descending order, such as a ranking of sales performance (the measure) by salespersons (the category, with each salesperson a categorical subdivision) during a single period. A bar chart may be used to show the comparison across the salespersons. Part-to-whole: Categorical subdivisions are measured as a ratio to the whole (i.e., a percentage out of 100%). A pie chart or bar chart can show the comparison of ratios, such as the market share represented by competitors in a market. Deviation: Categorical subdivisions are compared against a reference, such as a comparison of actual vs. budget expenses for several departments of a business for a given time period. A bar chart can show the comparison of the actual versus the reference amount. Frequency distribution:

  Read more →
• 

  PGP word list

  The PGP Word List ("Pretty Good Privacy word list", also called a biometric word list for reasons explained below) is a list of words for conveying data bytes in a clear unambiguous way via a voice channel. They are analogous in purpose to the NATO phonetic alphabet, except that a longer list of words is used, each word corresponding to one of the 256 distinct numeric byte values. == History and structure == The PGP Word List was designed in 1995 by Patrick Juola, a computational linguist, and Philip Zimmermann, creator of PGP. The words were carefully chosen for their phonetic distinctiveness, using genetic algorithms to select lists of words that had optimum separations in phoneme space. The candidate word lists were randomly drawn from Grady Ward's Moby Pronunciator list as raw material for the search, successively refined by the genetic algorithms. The automated search converged to an optimized solution in about 40 hours on a DEC Alpha, a particularly fast machine in that era. The Zimmermann–Juola list was originally designed to be used in PGPfone, a secure VoIP application, to allow the two parties to verbally compare a short authentication string to detect a man-in-the-middle attack (MiTM). It was called a biometric word list because the authentication depended on the two human users recognizing each other's distinct voices as they read and compared the words over the voice channel, binding the identity of the speaker with the words, which helped protect against the MiTM attack. The list can be used in many other situations where a biometric binding of identity is not needed, so calling it a biometric word list may be imprecise. Later, it was used in PGP to compare and verify PGP public key fingerprints over a voice channel. This is known in PGP applications as the "biometric" representation. When it was applied to PGP, the list of words was further refined, with contributions by Jon Callas. More recently, it has been used in Zfone and the ZRTP protocol, the successor to PGPfone. The list is actually composed of two lists, each containing 256 phonetically distinct words, in which each word represents a different byte value between 0 and 255. Two lists are used because reading aloud long random sequences of human words usually risks three kinds of errors: 1) transposition of two consecutive words, 2) duplicate words, or 3) omitted words. To detect all three kinds of errors, the two lists are used alternately for the even-offset bytes and the odd-offset bytes in the byte sequence. Each byte value is actually represented by two different words, depending on whether that byte appears at an odd or an even offset from the beginning of the byte sequence. The two lists are readily distinguished by the number of syllables; the odd list has words of three syllables, the even list has two. The two lists have a maximum word length of 11 and 9 letters, respectively. Using a two-list scheme was suggested by Zhahai Stewart. == Examples == Each byte in a bytestring is encoded as a single word. A sequence of bytes is rendered in network byte order, from left to right. For example, the leftmost (i.e. byte 0) is considered "even" and is encoded using the PGP Even Word table. The next byte to the right (i.e. byte 1) is considered "odd" and is encoded using the PGP Odd Word table. This process repeats until all bytes are encoded. Thus, "E582" produces "topmost Istanbul", whereas "82E5" produces "miser travesty". A PGP public key fingerprint that displayed in hexadecimal as E582 94F2 E9A2 2748 6E8B 061B 31CC 528F D7FA 3F19 would display in PGP Words (the "biometric" fingerprint) as topmost Istanbul Pluto vagabond treadmill Pacific brackish dictator goldfish Medusa afflict bravado chatter revolver Dupont midsummer stopwatch whimsical cowbell bottomless The order of bytes in a bytestring depends on endianness. == Other word lists for data == There are several other word lists for conveying data in a clear unambiguous way via a voice channel: the NATO phonetic alphabet maps individual letters and digits to individual words the S/KEY system maps 64 bit numbers to 6 short words of 1 to 4 characters each from a publicly accessible 2048-word dictionary. The same dictionary is used in RFC 1760 and RFC 2289. the Diceware system maps five base-6 random digits (almost 13 bits of entropy) to a word from a dictionary of 7,776 distinct words. the Electronic Frontier Foundation has published a set of improved word lists based on the same concept FIPS 181: Automated Password Generator converts random numbers into somewhat pronounceable "words". mnemonic encoding converts 32 bits of data into 3 words from a vocabulary of 1626 words. what3words encodes geographic coordinates in 3 dictionary words. the BIP39 standard permits encoding a cryptographic key of fixed size (128 or 256 bits, usually the unencrypted master key of a Cryptocurrency wallet) into a short sequence of readable words known as the seed phrase, for the purpose of storing the key offline. This is used in cryptocurrencies such as Bitcoin or Monero. Like the PGP word list, the Bytewords standard maps each possible byte to a word. There is only one list, rather than two. The words are uniformly four letters long and can be uniquely identified by their first and last letters

  Read more →
• 

  Text-to-video model

  A text-to-video model is a form of generative artificial intelligence that uses a natural language description as input to produce a video relevant to the input text. Advancements during the 2020s in the generation of high-quality, text-conditioned videos have largely been driven by the development of video diffusion models. == Models == There are different models, including open source models. Chinese-language input CogVideo is the earliest text-to-video model "of 9.4 billion parameters" to be developed, with its demo version of open source codes first presented on GitHub in 2022. That year, Meta Platforms released a partial text-to-video model called "Make-A-Video", and Google's Brain (later Google DeepMind) introduced Imagen Video, a text-to-video model with 3D U-Net. === 2023 === In February 2023, Runway released Gen-1 and Gen-2, among the first commercially available text-to-video and video-to-video models accessible to the public through a web interface. Gen-1, initially released as a video-to-video model, allowed users to transform existing video footage using text or image prompts. Gen-2, introduced in March 2023 and made publicly available in June 2023, added text-to-video capabilities, enabling users to generate videos from text prompts alone. In March 2023, a research paper titled "VideoFusion: Decomposed Diffusion Models for High-Quality Video Generation" was published, presenting a novel approach to video generation. The VideoFusion model decomposes the diffusion process into two components: base noise and residual noise, which are shared across frames to ensure temporal coherence. By utilizing a pre-trained image diffusion model as a base generator, the model efficiently generated high-quality and coherent videos. Fine-tuning the pre-trained model on video data addressed the domain gap between image and video data, enhancing the model's ability to produce realistic and consistent video sequences. In the same month, Adobe introduced Firefly AI as part of its features. === 2024 === In January 2024, Google announced development of a text-to-video model named Lumiere which is anticipated to integrate advanced video editing capabilities. Matthias Niessner and Lourdes Agapito at AI company Synthesia work on developing 3D neural rendering techniques that can synthesise realistic video by using 2D and 3D neural representations of shape, appearances, and motion for controllable video synthesis of avatars. In June 2024, Luma Labs launched its Dream Machine video tool. That same month, Kuaishou extended its Kling AI text-to-video model to international users. In July 2024, TikTok owner ByteDance released Jimeng AI in China, through its subsidiary, Faceu Technology. By September 2024, the Chinese AI company MiniMax debuted its video-01 model, joining other established AI model companies like Zhipu AI, Baichuan, and Moonshot AI, which contribute to China's involvement in AI technology. In December 2024 Lightricks launched LTX Video as an open source model. === 2025 === Alternative approaches to text-to-video models include Google's Phenaki, Hour One, Colossyan, Runway's Gen-3 Alpha, and OpenAI's Sora, Several additional text-to-video models, such as Plug-and-Play, Text2LIVE, and TuneAVideo, have emerged. FLUX.1 developer Black Forest Labs has announced its text-to-video model SOTA. Google was preparing to launch a video generation tool named Veo for YouTube Shorts in 2025. In May 2025, Google launched the Veo 3 iteration of the model. It was noted for its impressive audio generation capabilities, which were a previous limitation for text-to-video models. In July 2025 Lightricks released an update to LTX Video capable of generating clips reaching 60 seconds, and in October 2025 it released LTX-2, with audio capabilities built in. === 2026 === In February 2026, ByteDance released Seedance 2.0, it was noted for its impressive realistic generation, motion and camera control and 15 second generation, however the model faced huge critiscism from Motion Picture Association for copyright infringement. After viewing a viral clip of a fight between actors Brad Pitt and Tom Cruise, Rhett Reese, who is the co-writer of Deadpool & Wolverine and Zombieland announced that on social media "I hate to say it. It’s likely over for us," further stating that "In next to no time, one person is going to be able to sit at a computer and create a movie indistinguishable from what Hollywood now releases." == Architecture and training == There are several architectures that have been used to create text-to-video models. Similar to text-to-image models, these models can be trained using Recurrent Neural Networks (RNNs) such as long short-term memory (LSTM) networks, which has been used for Pixel Transformation Models and Stochastic Video Generation Models, which aid in consistency and realism respectively. An alternative for these include transformer models. Generative adversarial networks (GANs), Variational autoencoders (VAEs), — which can aid in the prediction of human motion — and diffusion models have also been used to develop the image generation aspects of the model. Text-video datasets used to train models include, but are not limited to, WebVid-10M, HDVILA-100M, CCV, ActivityNet, and Panda-70M. These datasets contain millions of original videos of interest, generated videos, captioned-videos, and textual information that help train models for accuracy. Text-video datasets used to train models include, but are not limited to PromptSource, DiffusionDB, and VidProM. These datasets provide the range of text inputs needed to teach models how to interpret a variety of textual prompts. The video generation process involves synchronizing the text inputs with video frames, ensuring alignment and consistency throughout the sequence. This predictive process is subject to decline in quality as the length of the video increases due to resource limitations. The Will Smith Eating Spaghetti test is a benchmark for models. == Limitations == Despite the rapid evolution of text-to-video models in their performance, a primary limitation is that they are very computationally heavy which limits its capacity to provide high quality and lengthy outputs. Additionally, these models require a large amount of specific training data to be able to generate high quality and coherent outputs, which brings about the issue of accessibility. Moreover, models may misinterpret textual prompts, resulting in video outputs that deviate from the intended meaning. This can occur due to limitations in capturing semantic context embedded in text, which affects the model's ability to align generated video with the user's intended message. Various models, including Make-A-Video, Imagen Video, Phenaki, CogVideo, GODIVA, and NUWA, are currently being tested and refined to enhance their alignment capabilities and overall performance in text-to-video generation. Another issue with the outputs is that text or fine details in AI-generated videos often appear garbled, a problem that stable diffusion models also struggle with. Examples include distorted hands and unreadable text. == Ethics == The deployment of text-to-video models raises ethical considerations related to content generation. These models have the potential to create inappropriate or unauthorized content, including explicit material, graphic violence, misinformation, and likenesses of real individuals without consent. Ensuring that AI-generated content complies with established standards for safe and ethical usage is essential, as content generated by these models may not always be easily identified as harmful or misleading. The ability of AI to recognize and filter out NSFW or copyrighted content remains an ongoing challenge, with implications for both creators and audiences. == Impacts and applications == Text-to-video models offer a broad range of applications that may benefit various fields, from educational and promotional to creative industries. These models can streamline content creation for training videos, movie previews, gaming assets, and visualizations, making it easier to generate content. During the Russo-Ukrainian war, fake videos made with artificial intelligence were created as part of a propaganda war against Ukraine and shared in social media. These included depictions of children in the Ukrainian Armed Forces, fake ads targeting children encouraging them to denounce critics of the Ukrainian government, or fictitious statements by Ukrainian President Volodymyr Zelenskyy about the country's surrender, among others. === Movies === Kaur vs Kore is the first Indian feature film made using generative AI which features dual role for the AI character of Sunny Leone, set to release in 2026. Chiranjeevi Hanuman – The Eternal is an Indian movie made entirely using Generative AI created by Vijay Subramaniam which is set for theatrical release in 2026. The movie was widely criticised by the Film makers in the Bollywood industr

  Read more →
• 

  European Grid Infrastructure

  EGI (originally an initialism for European Grid Infrastructure) is a federation of computing and storage resource providers that deliver advanced computing and data analytics services for research and innovation. The Federation is governed by its participants represented in the EGI Council and coordinated by the EGI Foundation. As of 2024, the EGI Federation supports 160 scientific communities worldwide and over 95,000 users in their intensive data analysis. The most significant scientific communities supported by EGI in 2022 were Medical and Health Sciences, High Energy Physics, and Engineering and Technology. The EGI Federation provideds services through over 150 data centres, of which 25 are cloud sites, in 43 countries and 64 Research Infrastructures (4 of which are members of the Federation). == Name == Originally, EGI stood for European Grid Infrastructure. This reflected its focus on providing access to high-throughput computing resources across Europe using Grid computing techniques. However, as EGI's service offerings expanded beyond traditional grid computing, particularly with the incorporation of federated cloud services, the original meaning of the acronym became less accurate. To emphasise the broader scope of EGI's services and avoid any confusion associated with the outdated term "grid," it is recommended to refer to EGI simply as EGI. == Structure == === EGI Federation === The EGI Federation delivers a scalable digital research infrastructure (e-infrastructure), empowering tens of thousands of researchers across diverse scientific disciplines. Through the EGI Federation, researchers gain access to advanced computing and data analytics capabilities, including large-scale data analysis, while benefiting from the collaborative efforts of hundreds of service providers from both public and private sectors, consolidating resources from Europe and beyond. Overall, the EGI Federation offers a range of services, encompassing distributed high-throughput computing and cloud computing, storage and data management capabilities, co-development of new solutions, expert support, and comprehensive training opportunities. This ecosystem propels collaboration, scientific progress and innovation. === EGI Foundation === The EGI Foundation is the coordinating body of the EGI Federation. It was established in 2010 with headquarters in Amsterdam, Netherlands. The Foundation coordinates the research and innovation efforts of its members, spanning technical areas critical to data-intensive science, including large-scale data processing and analysis, distributed Artificial Intelligence/Machine Learning, federated Identity and access management and the application of digital twins for research. The day-to-day running of the EGI Foundation is supervised by the Executive Board. The board’s members work closely with the EGI Director on operational, technical and financial issues. The Executive Board’s members are appointed by the EGI Council for a two-year term. === EGI Council === The EGI Council is responsible for defining the strategic direction of the EGI Federation. The Council acts as the senior decision-making and supervisory authority of the EGI Foundation, with a mandate to define the strategic direction of the entire EGI ecosystem. === EGI Services === EGI offers a suite of services to support data-intensive research. These services include compute resources, orchestration tools, storage and data management solutions, training programmes, security and identity services, and applications. Compute resources encompass cloud compute, cloud container compute, high-throughput compute, and software distribution. Orchestration tools include the Workload Manager and infrastructure manager. Storage and data management solutions include online storage, data transfer, and DataHub. Training programmes cover FitSM, ISO 27001, and general training infrastructure. EGI Check-in and Secrets Store are key security and identity services, while applications such as Notebooks and Replay enhance research productivity. In addition to services for Research, EGI also provides services for Federation and Business. Services for Federation are designed to help resource providers and user communities collaborate and share resources. EGI also offers a range of services to support businesses in their digital transformation. Through the EGI Digital Innovation Hub (EGI DIH), companies can access advanced computing resources, networking, funding and training opportunities, collaborate with research institutions, and test solutions before investing. == History == In 2002, the first large-scale experimental facility was successfully demonstrated by the DataGrid project under the lead of CERN with tens of technical architects from the major High Energy Physics institutes in the world. For the first time, distributed computing was applied to data-intensive processing. It aimed at developing a large-scale computational grid to facilitate distributed data-intensive scientific computing across High Energy Physics, Earth Observation, and Biology science applications. On 28 February 2003, the first software release of LCG-MW was published. gLite, the Lightweight Middleware for Grid Computing and LCG, Large Hadron Collider Computing Grid, are the cornerstone of the Worldwide LHC Computing Grid, which expanded over time towards the EGI Federation. 2004 marks the year of the first pilot infrastructure, seeing the participation of CERN and data centres in the United Kingdom, Spain, Germany, the Netherlands, France, Canada, Russia, Bulgaria, the Asia-Pacific region and Switzerland. Over the years, the infrastructure has grown into a federation of 128 data centres and 25 cloud providers serving more than 95,000 users worldwide. In 2004, the first data processing tasks started being formally recorded in a central accounting system. The EGI Accounting Portal provides the accounting data for Compute, Storage and Data services gathered from the data centres of the EGI Federation. A few years later, in 2010, EGI was established as the coordinating body of the EGI Federation to build an integrated pan-European infrastructure to support European research communities primarily. In the same year, EGI launched the flagship project EGI Inspire. That project brought together European organisations to establish a sustainable European Grid Infrastructure for large-scale data analysis. The success of the project was due to the adoption of a distributed computing model to solve big data problems. Moreover, EGI-Inspire harmonised operational policies across its federation of affiliated data centres and cloud service providers worldwide, integrating e-infrastructures from 57 countries. The EGI Federation was the first to apply federation to cloud provisioning, opening a new avenue in large-scale interactive data analysis. In 2015, within EGI Engage, opening a new avenue in large-scale interactive data analysis. The EGI Federated Cloud is an IaaS-type cloud, incorporating academic and private clouds and virtualised resources built using open standards. Its development is driven by the needs of the scientific community, resulting in a novel research e-infrastructure that relies on well-established federated operational services, making EGI a dependable resource for scientific endeavours. In 2015, EGI, EUDAT, GÉANT, LIBER and OpenAIRE published a position paper on a 'European Open Science Cloud for Research'. With the EOSC-hub project in 2016, EGI started contributing in practice to shaping the services for the EOSC. The work continued with a series of projects, like EOSC Enhance, EOSC Life and EOSC Synergy. With EGI-ACE and its contribution to EOSC Future, EGI has continued developing the EOSC Core. In early 2024, EGI started providing services to the EOSC EU Node, and with EOSC Beyond it will provide new EOSC Core capabilities and pilot additional national and thematic nodes. In October 2024, EUDAT, GÉANT, OpenAIRE, PRACE and EGI signed a Memorandum of Understanding establishing the European e-Infrastructures Assembly. This collaboration will bolster the position and promote the services of e-Infrastructures, empowering researchers across Europe to drive innovation and advance scientific discovery.

  Read more →
• 

  PitchYaGame

  PitchYaGame or #PitchYaGame (sometimes abbreviated to PYG) is a volunteer movement hosted on the social media platform Twitter to showcase, and present awards for, independent video games from around the world. == Description == PitchYaGame is hosted on the social media platform Twitter to showcase independent video games from around the world. Video pitches are presented by developers in June and November each year, and use the hashtag #PitchYaGame to identify and reference news about the showcase and the individual pitches, and the presentation of awards. The showcase was founded in May 2020 by Liam Twose, with the mission of recognising independent video games, and "focused on empowering indie game developers to strengthen their position in the industry." Twose has made clear that PitchYaGame is a showcase and not a hardcore competition, with "[j]ust enough of a push to make sure people put their best pitch forward." The team now comprises Twose (@LiamTwose at Twitter), operations manager "Indie Game Lover" (@IndieGameLover), and host Sarah Clancy (@ImSarahNow). The pitches were originally made monthly, with entries split into a number of categories, but this proved unmanageable. PitchYaGame collaborator, Sarah Clancy reported that judging the many entries on a monthly basis was "difficult and unwieldy." Therefore, pitches were later switched to six monthly, "feature creep" was reduced, and awards streamlined into gold, silver, bronze, runners-up, and most viral. == Sponsorship == In June 2021, PitchYaGame prizes were sponsored by Xsolla, and in November 2021 by Aurora Punks and Cold Pixel. No cash prizes were available in 2022, as the organisers moved PitchYaGame into a less-competitive, "more showcase centric format". == Reception == In October 2020, Elijah Beahm at The Escapist wrote that "One of the greatest challenges for any game is landing a solid pitch. You have to sell people, maybe even a publisher, to take your idea seriously. Most of the time, it's an obfuscated process that leaves the average developer scratching their heads, but Liam Twose and his team behind #PitchYaGame, 'PYG' for short, are looking to change all that with some clever social engineering." In March 2021, Cameron Koch at GameSpot wrote that "Using the #PitchYaGame, thousands of indie developers tweeted out pitches for their games on November 2 as part of a social media contest, and the results are astounding." He went on to say that "There is no arguing with the results. According to Twose, around 1100-1300 games were shared with the hashtag, and some real gems look to have shined through." In November 2021, Stafano "Stef" Castelli at IGN Italia wrote that "I myself enjoyed 'browsing through' the competitors, discovering a handful of intriguing video games in development." (translated from Italian). In November 2022, Eric Bartelson at Premortem Games wrote that "It's a great way to get games noticed by fellow developers, but also publishers, investors and press." In June 2023, Mark Plunkett in Kotaku wrote about the impossibility of keeping up with all the video game releases, and described PitchYaGame, which has attracted over 10,000 pitches since 2020, as an "astoundingly simple idea" that has "become an increasingly useful spot to catch up on some excellent-looking games that we may have otherwise completely slept on."

  Read more →
• 

  List of broadband over power line deployments

  This is a list of broadband over power line deployments. In this sense, "broadband" usually refers to Internet access using power line communication technology. == BPL pilot projects - 1st Gen (UPA) == === Inactive pilot projects === North America: United States: The United Telecom Council publishes the Federal Communications Commission (FCC)-mandated BPL Interference Resolution website, which provides a list of all BPL deployments in the US. Canada: Quebec: As of 2005, PLC communication technology developed by Ariane Controls is being installed inside and outside existing buildings to control lights and other energy-hungry devices. The cheap devices allow energy consumption to be better managed, and so save much energy and bring a clear return on investment. Western Europe: Sweden: Vattenfall is using PLC technology at 1200 baud for automatic meter reading based on an Iskraemeco product. Central and Eastern Europe, and Eurasia: Russian Federation: Electro-com has deployed widely BPL/PLC technology and offers internet access service in Moscow, Nizhny Novgorod, Ryazan, Kaluga and Rostov-on-Don, planning to extend coverage to main Russian cities. Currently the company does not provide other services, though plans to start providing telephone, and television services someday. Base equipment is a DefiDev modem with a DS2 chipset. The company had 35,000 subscribers and an annual growth of 15-20%. The company has, however, halted operations in Moscow in September, 2008, having sold its client network to an IDSL internet provider. Romania: In January, 2006, the Ministry of Communications and Information Technology introduced a PLC trial in the rural locality of Band, Mureș County, offering phone and broadband internet access for €7 per month. The technology was introduced to 50 households. Montenegro: In March, 2002, the Internet Crna Gora biggest internet provider in Montenegro launched a pilot project in town of Cetinje. Serbia: In August 2002, the Star Engineering from Niš launched a pilot project to show a completely new way to access the Internet, which is a new in that time in most countries around the world. Hungary: The first powerline service in Hungary was realized in September, 2003, in the Riverside apartment house in Budapest by 23Vnet Ltd. The PLC equipment was supplied by ASCOM Powerline. After four months the service was counting 100 users from 450 apartment owners. The bandwidth is 4.5 Mbit/s. Asia, Pacific, and Oceania: Indonesia: PT Kejora Gemilang Internusa "KEJORA", under their banner PLANET BROADBAND, is currently rolling out broadband over power line, with over 300,000 homes expected to be enabled by August 2010. PT. Kejora Gemilang Internusa signed an 8-year Joint Venture concession agreement with ICON+ a division of PT. Perusahaan Listrik Negara (Indonesia electricity company). Under the terms of the agreement PLAnet Broadband are to supply BPL/PLC to Jakarta West and West Java. Another company, PT. Broadband Powerline Indonesia, has been developing broadband over power line in apartment buildings since 2006. PT. BPI also produces data couplers to make broadband over powerline possible in three phases (R, S, T) with a single master. India : In India IIIT Allahabad has completed a project in co-operation with Corinex Communications Canada to implement a prototype of BPL for University campus and nearby villages. Africa and the Middle East: Egypt: The Engineering Office for Integrated Projects (EOIP) has deployed PLC technology widely in Alexandria, Fayed, and Tanta. Based on a locally developed system, the company provides AMR for electricity utilities. Currently, the company has about 70,000 subscribers. South Africa: Goal Technology Solutions (GTS) trialled the technology and is offering service in the suburbs of Pretoria, and plans to extend it to other areas. The tests were done with Mitsubishi equipment using a DS2 chipset, and the company claims a maximum throughput of 90 Mbit/s although initially only "512 Kbits/s ADSL equivalent speeds" are available. Now it uses DefiDev's equipment, and according to GTS's website, it will expand available bandwidth up to 5-20 Mbit/s. Ghana: Cactel Communications, Ltd. successfully deployed an MV solution pilot project in the Graphic Communications Group in Accra in June, 2005. A Cactel Remote Energy Management System (REMS) pilot project for the Electricity Company of Ghana (ECG) is running a 40-user pilot project at the University of Ghana in Legon. The current project combines fiber, radio link, Wi-Fi and PLC to provide broadband internet access and telephony. It showcases the interoperability of PLC technology and the company's expertise in emerging market design and deployment. Cactel hopes to deploy nationally, and is in deliberations with the national stakeholders and with Ghana's Ministry of Communications (MoC). AllTerra Communications successfully implemented a pilot test of broadband over power lines in Akosombo. In partnership with VRA, this test involves demonstrating transmission of broadband from medium to low voltage signals. AllTerra is working with VRA to expand the pilot project to include essential grid management utilities that will help balance and manage the current electricity transmission throughout their various substations. Using IT as a catalyst for economic development, AllTerra is expanding into numerous areas throughout Ghana. Vobiss Solutions Ltd successfully implemented a Hybrid Fibre BPL pilot network within EMEFS Hillview Estate in collaboration with ECG. Saudi Arabia: ElectroNet has been working with the Saudi Electric Company since 2005 on a pilot project using broadband over power lines over medium voltage cables and linking into low voltage distribution within a shopping mall. The pilot project also integrates automatic meter readers. Powerlines Communications Co. Ltd. implemented an AMR pilot project for Saudi Electricity Company in 2006. The project was located in the city of Jeddah on the west coast of Saudi Arabia. Digital KWh meters were installed in parallel with analog KWh meters. Readings taken by the Saudi Electricity Company showed variations of less than 1%. A BPL pilot project was included. Saudi Arabian Computer Management Consultants (SACMAC) has signed a deal to become an official system integrator and distributor for Mitsubishi PLC. It is expected to become a great success, because the existing broadband service, monopolized by the Saudi Telecom Company, is expensive and has poor customer service (some clients report that company techs arrive months after ordering). SACMAC has declined to talk about specifics of availability and price but says it will start rolling out the service in a few months (as of May 2006) and its price will be lower than current broadband providers. === Concluded pilot projects === The following pilot projects have ended: Australia, Tasmania: In November 2007, electricity retailer Aurora Energy ended its involvement with BPL and announced it was switching to Optical Fiber. This ended their commercial trial begun in September 2005, offering BPL services to 500 homes in the suburb of Tolmans Hill near Hobart, which had followed a successful technological trial earlier that year. Portugal ended BPL/PLC deployments in the country in October 2006, reportedly for economic reasons., Russian Federation: In September 2008, Russia's only BPL provider Electro-com ended deployments in Moscow for economic reasons. Spain: In May 2007 Iberdrola and Endesa (the main power companies in Spain) ended their projects to deploy PLC. United States: As of July 2010, the City of Manassas, VA has shut down their BPL deployment, which was the largest in the country. As of April 2007, Motorola has shuttered its Powerline LV Access BPL and reportedly plans to re-purpose the technology to a new system called Powerline MU, which is for use within multiple-unit dwellings. Motorola's system uses only residential-side low-voltage power lines for transmission to reduce the antenna effect, and successfully demonstrated frequency-notching for reduced potential for interference over the Amperion Inc. and Current Technologies LLC systems. Motorola invited the American Radio Relay League to participate with these tests, and even installed the Motorola system at their headquarters. Preliminary results were very positive with regard to interference, because the Motorola system does not use BPL on the powerlines leading up to the neighborhood. The BPL carrier is only used for the last leg of the trip from the pole to the house, and gets the signal to the pole via radio. This limits the interference to the area surrounding the last leg to the house. === Dismantled pilot projects === The following other BPL trials in the US are dismantled as of May 2008:

  Read more →
• 

  North Atlantic Population Project

  The North Atlantic Population Project (NAPP) is a collaboration of historical demographers in Britain, Canada, Denmark, Germany, Iceland, Norway, and Sweden to produce a massive census microdata collection for the North Atlantic Region in the late-nineteenth century. The database includes complete individual-level census enumerations for each country, and provides information on over 110 million people. This large scale allows detailed analysis of small geographic areas and population subgroups. The NAPP database is designed to be compatible with the Integrated Public Use Microdata Series (IPUMS), and is disseminated through the IPUMS data-access system at the Minnesota Population Center, University of Minnesota. Major collaborators on the project include Lisa Dillon, University of Montreal; Chad Gaffield, University of Ottawa; Ólöf Garðarsdóttir, Statistics Iceland; Marianne Jarnes Erikstad, University of Tromsø; Jan Oldervall University of Bergen; Evan Roberts, University of Minnesota; Steven Ruggles, University of Minnesota; Kevin Schürer, UK Data Archive; Gunnar Thorvaldsen, University of Tromsø; and Matthew Woollard, UK Data Archive. The project is also coordinated by the Minnesota Population Center at the University of Minnesota.

  Read more →
• 

  NRENum.net

  The NRENum.net service is an end-user ENUM service run by TERENA and the participating national research and education networking organisations (NRENs), primarily for academia. NRENum.net is considered as a complementary service and a valid alternative to the Golden ENUM tree. The domain nrenum.net is being populated in order to provide the infrastructure in DNS for storage of E.164 numbers. The NRENum.net service includes the operation of the Tier-0 root Domain Name Server(s) and the delegation of county codes to NRENum.net Registries. NRENum.net is a registered community trademark of TERENA. == Service description == E.164 Telephone Number Mapping (ENUM) is a standard protocol that is the result of work of the Internet Engineering Task Force's Telephone Number Mapping working group. ENUM translates a telephone number into a domain name. This allows users to continue to use the existing phone number formats they are familiar with, while allowing the call to be routed using DNS. This makes ENUM a quick, stable and cheap link between telecommunications systems and the Internet. RFC 3761 discusses the use of the Domain Name System for storage of E.164 numbers. More specifically, how DNS can be used for identifying available services connected to one E.164 number. The RIPE NCC provides DNS operations for e164.arpa (known as Golden ENUM tree) in accordance with the instructions from the Internet Architecture Board. The NRENum.net service is an end-user ENUM service run by TERENA and the participating NRENs primarily for academia. NRENum.net is considered as a complementary service and a valid alternative to the Golden ENUM tree. The domain nrenum.net is being populated in order to provide the infrastructure in DNS for storage of E.164 numbers. The NRENum.net service includes the operation of the Tier-0 root Domain Name Servers and the delegation of county codes to NRENum.net Registries. NRENum.net is a registered community trademark of TERENA. NRENum.net facilitates services such as Voice over IP and videoconferencing. NRENum.net tree refers to the tree structure where: Tier-0 root Domain Name Servers (technically one master and several secondary servers ensuring resilience) are run by the hosting organisations and coordinated by the NRENum.net Operations Team. Tier-1 Domain Name Servers are run by the NRENum.net (national or regional) Registries responsible for the country code(s) delegated. Tier-2 and lower DNS sub-delegations may be implemented, regulated by the national service policies. An NRENum.net Registry is an entity that is authorised by the NRENum.net Operations Team to operate the national or regional Tier-1 Domain Name Server and be responsible for the county code(s) delegated. In many countries there is a National Research and Education Networking organisation (NREN) that acts as the Registry of the country. An NRENum.net Registrar is responsible for the number/block registration in the Tier-1 DNS and a Number Validation Entity is responsible for the validation of the E.164 telephone numbers to be registered. The NREN may at the same time have the role of the NRENum.net Registry, Registrar and Validation Entity for the country code(s) delegated. A Registrant (end user) is an E.164 telephone number holder. Holders of E.164 numbers who want to be listed in the service must contact the appropriate NRENum.net Registrar. Number (block) delegation is the technical process of assigning country codes to national registries, or number blocks under country codes to end users. Number (block) registration is the technical process of configuring DNS and populating it with the appropriate ENUM records (i.e., adding NAPTR records to DNS) via registrars. The ITU-T strictly regulates the number structure of valid E.164 telephone numbers and assigns number blocks to national authorities (telecom regulators) or recently to global entities directly. The national authorities can further delegate the number ranges to local operators within the country or region. A virtual number has either a non-valid E.164 number structure (e.g., longer than 15 digits) or has a valid structure but is not assigned to any national authorities or operators. The number Validation Entity is responsible for checking the numbers to be registered to NRENum.net. == History == The idea for the NRENum.net service was conceived in 2006. NRENum.net became operational in August 2006, and was run by Bernie Höneisen, a staff member of SWITCH, and Kewin Stöckigt, a staff member of AARNet, as a private service, with technical support from SWITCH and the participants in the TERENA Task Force on Enhanced Communication Services (TF-ECS). When that task force completed its activities in 2008, TERENA agreed to take over the coordination of the NRENum.net service. By that time, nine NRENs had joined NRENum.net. The service continued to grow during the next years, and in March 2012 NRENum.net went global when RNP from Brazil joined the service as its 14th partificpant and the first outside Europe. In 2011, the participants decided to migrate the operation of the service's master Domain Name Server to NIIF and the operation of the two secondary DNSs to CARNET and SWITCH. In 2013, Internet2, AARNet and NORDUnet set up additional secondary Domain Name Servers for their regions, thereby completing the global distribution of DNS slaves and bringing the resilience of the NRENum.net infrastructure to a high level. == Governance == TERENA has established a lightweight global governance structure. The Global NRENum.net Governance Committee (GNGC) is the highest-level strategic body responsible for overall NRENum.net service definition, sustainability and long-term strategy. This includes formulating and recommending service governance principles and policies. Its members are nominated by the NRENum.net Registries in the various world regions, and are appointed by TERENA. The GNGC is composed of two members representing Europe, two representing the Asia-Pacific region, and two representing the Americas. The NRENum.net Operations Team is responsible for the day-to-day operations of the Tier-0 root DNSs and the handling of country code delegation requests. It may escalate technical or policy issues to the GNGC for discussion. TERENA is responsible for ensuring the correct and secure operations of the NRENum.net service performed by the NRENum.net Operations Team and governance by the GNGC. TERENA also supports the development of technical improvements to the NRENum.net service and promotes the deployment of NRENum.net worldwide. == Geographical deployment == Thirty-two county codes are delegated in the NRENum.net service. Below these are listed per world region. === Europe === === Asia-Pacific === === North America === +1 United States (Internet2) === Latin America === === Caribbean === === Africa === +262 Réunion, Mayotte (RENATER)

  Read more →
• 

  Code (cryptography)

  In cryptology, a code is a method used to encrypt a message that operates at the level of meaning; that is, words or phrases are converted into something else. A code might transform "change" into "CVGDK" or "cocktail lounge". The U.S. National Security Agency defined a code as "A substitution cryptosystem in which the plaintext elements are primarily words, phrases, or sentences, and the code equivalents (called "code groups") typically consist of letters or digits (or both) in otherwise meaningless combinations of identical length." A codebook is needed to encrypt, and decrypt the phrases or words. By contrast, ciphers encrypt messages at the level of individual letters, or small groups of letters, or even, in modern ciphers, individual bits. Messages can be transformed first by a code, and then by a cipher. Such multiple encryption, or "superencryption" aims to make cryptanalysis more difficult. Another comparison between codes and ciphers is that a code typically represents a letter or groups of letters directly without the use of mathematics. As such the numbers are configured to represent these three values: 1001 = A, 1002 = B, 1003 = C, ... . The resulting message, then would be 1001 1002 1003 to communicate ABC. Ciphers, however, utilize a mathematical formula to represent letters or groups of letters. For example, A = 1, B = 2, C = 3, ... . Thus the message ABC results by multiplying each letter's value by 13. The message ABC, then would be 13 26 39. Codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing the cumbersome codebooks, so ciphers are now the dominant technique in modern cryptography. In contrast, because codes are representational, they are not susceptible to mathematical analysis of the individual codebook elements. In the example, the message 13 26 39 can be cracked by dividing each number by 13 and then ranking them alphabetically. However, the focus of codebook cryptanalysis is the comparative frequency of the individual code elements matching the same frequency of letters within the plaintext messages using frequency analysis. In the above example, the code group, 1001, 1002, 1003, might occur more than once and that frequency might match the number of times that ABC occurs in plain text messages. (In the past, or in non-technical contexts, code and cipher are often used to refer to any form of encryption). == One- and two-part codes == Codes are defined by "codebooks" (physical or notional), which are dictionaries of codegroups listed with their corresponding plaintext. Codes originally had the codegroups assigned in 'plaintext order' for convenience of the code designed, or the encoder. For example, in a code using numeric code groups, a plaintext word starting with "a" would have a low-value group, while one starting with "z" would have a high-value group. The same codebook could be used to "encode" a plaintext message into a coded message or "codetext", and "decode" a codetext back into plaintext message. In order to make life more difficult for codebreakers, codemakers designed codes with no predictable relationship between the codegroups and the ordering of the matching plaintext. In practice, this meant that two codebooks were now required, one to find codegroups for encoding, the other to look up codegroups to find plaintext for decoding. Such "two-part" codes required more effort to develop, and twice as much effort to distribute (and discard safely when replaced), but they were harder to break. The Zimmermann Telegram in January 1917 used the German diplomatic "0075" two-part code system which contained upwards of 10,000 phrases and individual words. == One-time code == A one-time code is a prearranged word, phrase or symbol that is intended to be used only once to convey a simple message, often the signal to execute or abort some plan or confirm that it has succeeded or failed. One-time codes are often designed to be included in what would appear to be an innocent conversation. Done properly they are almost impossible to detect, though a trained analyst monitoring the communications of someone who has already aroused suspicion might be able to recognize a comment like "Aunt Bertha has gone into labor" as having an ominous meaning. Famous example of one time codes include: In the Bible, Jonathan prearranges a code with David, who is going into hiding from Jonathan's father, King Saul. If, during archery practice, Jonathan tells the servant retrieving arrows "the arrows are on this side of you," David may safely return to court; if the command is "the arrows are beyond you," David must flee. "One if by land; two if by sea" in "Paul Revere's Ride" made famous in the poem by Henry Wadsworth Longfellow "Climb Mount Niitaka" - the signal to Japanese planes to begin the attack on Pearl Harbor During World War II the British Broadcasting Corporation's overseas service frequently included "personal messages" as part of its regular broadcast schedule. The seemingly nonsensical stream of messages read out by announcers were actually one time codes intended for Special Operations Executive (SOE) agents operating behind enemy lines. An example might be "The princess wears red shoes" or "Mimi's cat is asleep under the table". Each code message was read out twice. By such means, the French Resistance were instructed to start sabotaging rail and other transport links the night before D-day. "Over all of Spain, the sky is clear" was a signal (broadcast on radio) to start the nationalist military revolt in Spain on July 17, 1936. Sometimes messages are not prearranged and rely on shared knowledge hopefully known only to the recipients. An example is the telegram sent to U.S. President Harry Truman, then at the Potsdam Conference to meet with Soviet premier Joseph Stalin, informing Truman of the first successful test of an atomic bomb. "Operated on this morning. Diagnosis not yet complete but results seem satisfactory and already exceed expectations. Local press release necessary as interest extends great distance. Dr. Groves pleased. He returns tomorrow. I will keep you posted." == Idiot code == An idiot code is a code that is created by the parties using it. This type of communication is akin to the hand signals used by armies in the field. Example: Any sentence where 'day' and 'night' are used means 'attack'. The location mentioned in the following sentence specifies the location to be attacked. Plaintext: Attack X. Codetext: We walked day and night through the streets but couldn't find it! Tomorrow we'll head into X. An early use of the term appears to be by George Perrault, a character in the science fiction book Friday by Robert A. Heinlein: The simplest sort [of code] and thereby impossible to break. The first ad told the person or persons concerned to carry out number seven or expect number seven or it said something about something designated as seven. This one says the same with respect to code item number ten. But the meaning of the numbers cannot be deduced through statistical analysis because the code can be changed long before a useful statistical universe can be reached. It's an idiot code... and an idiot code can never be broken if the user has the good sense not to go too often to the well. Terrorism expert Magnus Ranstorp said that the men who carried out the September 11 attacks on the United States used basic e-mail and what he calls "idiot code" to discuss their plans. == Cryptanalysis of codes == While solving a monoalphabetic substitution cipher is easy, solving even a simple code is difficult. Decrypting a coded message is a little like trying to translate a document written in a foreign language, with the task basically amounting to building up a "dictionary" of the codegroups and the plaintext words they represent. One fingerhold on a simple code is the fact that some words are more common than others, such as "the" or "a" in English. In telegraphic messages, the codegroup for "STOP" (i.e., end of sentence or paragraph) is usually very common. This helps define the structure of the message in terms of sentences, if not their meaning, and this is cryptanalytically useful. Further progress can be made against a code by collecting many codetexts encrypted with the same code and then using information from other sources spies newspapers diplomatic cocktail party chat the location from where a message was sent where it was being sent to (i.e., traffic analysis) the time the message was sent, events occurring before and after the message was sent the normal habits of the people sending the coded messages etc. For example, a particular codegroup found almost exclusively in messages from a particular army and nowhere else might very well indicate the commander of that army. A codegroup that appears in messages preceding an attack on a particular location may very well stand for that location. Cribs can be an immediate giveaway to the definiti

  Read more →