AI Chat Exporter Firefox

AI Chat Exporter Firefox — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Truth discovery

Truth discovery (also known as truth finding) is the process of choosing the actual true value for a data item when different data sources provide conflicting information on it. Several algorithms have been proposed to tackle this problem, ranging from simple methods like majority voting to more complex ones able to estimate the trustworthiness of data sources. Truth discovery problems can be divided into two sub-classes: single-truth and multi-truth. In the first case only one true value is allowed for a data item (e.g birthday of a person, capital city of a country). While in the second case multiple true values are allowed (e.g. cast of a movie, authors of a book). Typically, truth discovery is the last step of a data integration pipeline, when the schemas of different data sources have been unified and the records referring to the same data item have been detected. == General principles == The abundance of data available on the web makes more and more probable to find that different sources provide (partially or completely) different values for the same data item. This, together with the fact that we are increasing our reliance on data to derive important decisions, motivates the need of developing good truth discovery algorithms. Many currently available methods rely on a voting strategy to define the true value of a data item. Nevertheless, recent studies, have shown that, if we rely only on majority voting, we could get wrong results even in 30% of the data items. The solution to this problem is to assess the trustworthiness of the sources and give more importance to votes coming from trusted sources. Ideally, supervised learning techniques could be exploited to assign a reliability score to sources after hand-crafted labeling of the provided values; unfortunately, this is not feasible since the number of needed labeled examples should be proportional to the number of sources, and in many applications the number of sources can be prohibitive. == Single-truth vs multi-truth discovery == Single-truth and multi-truth discovery are two very different problems. Single-truth discovery is characterized by the following properties: only one true value is allowed for each data item; different values provided for a given data item oppose to each other; values and sources can either be correct or erroneous. While in the multi-truth case the following properties hold: the truth is composed by a set of values; different values could provide a partial truth; claiming one value for a given data item does not imply opposing to all the other values; the number of true values for each data item is not known a priori. Multi-truth discovery has unique features that make the problem more complex and should be taken into consideration when developing truth-discovery solutions. The examples below point out the main differences of the two methods. Knowing that in both examples the truth is provided by source 1, in the single truth case (first table) we can say that sources 2 and 3 oppose to the truth and as a result provide wrong values. On the other hand, in the second case (second table), sources 2 and 3 are neither correct nor erroneous, they instead provide a subset of the true values and at the same time they do not oppose the truth. == Source trustworthiness == The vast majority of truth discovery methods are based on a voting approach: each source votes for a value of a certain data item and, at the end, the value with the highest vote is select as the true one. In the more sophisticated methods, votes do not have the same weight for all the data sources, more importance is indeed given to votes coming from trusted sources. Source trustworthiness usually is not known a priori but estimated with an iterative approach. At each step of the truth discovery algorithm the trustworthiness score of each data source is refined, improving the assessment of the true values that in turn leads to a better estimation of the trustworthiness of the sources. This process usually ends when all the values reach a convergence state. Source trustworthiness can be based on different metrics, such as accuracy of provided values, copying values from other sources and domain coverage. Detecting copying behaviors is very important, in fact, copy allows to spread false values easily making truth discovery very hard, since many sources would vote for the wrong values. Usually systems decrease the weight of votes associated to copied values or even don’t count them at all. == Single-truth methods == Most of the currently available truth discovery methods have been designed to work well only in the single-truth case. Below are reported some of the characteristics of the most relevant typologies of single-truth methods and how different systems model source trustworthiness. === Majority voting === Majority voting is the simplest method, the most popular value is selected as the true one. Majority voting is commonly used as a baseline when assessing the performances of more complex methods. === Web-link based === These methods estimate source trustworthiness exploiting a similar technique to the one used to measure authority of web pages based on web links. The vote assigned to a value is computed as the sum of the trustworthiness of the sources that provide that particular value, while the trustworthiness of a source is computed as the sum of the votes assigned to the values that the source provides. === Information-retrieval based === These methods estimate source trustworthiness using similarity measures typically used in information retrieval. Source trustworthiness is computed as the cosine similarity (or other similarity measures) between the set of values provided by the source and the set of values considered true (either selected in a probabilistic way or obtained from a ground truth). === Bayesian based === These methods use Bayesian inference to define the probability of a value being true conditioned on the values provided by all the sources. P ( v ∣ ψ ( o ) ) = P ( ψ ( o ) ∣ v ) ⋅ P ( v ) P ( ψ ( o ) ) {\displaystyle P(v\mid \psi (o))={\frac {P(\psi (o)\mid v)\cdot P(v)}{P(\psi (o))}}} where v {\displaystyle \textstyle v} is a value provided for a data item o {\displaystyle \textstyle o} and ψ ( o ) {\displaystyle \textstyle \psi (o)} is the set of the observed values provided by all the sources for that specific data item. The trustworthiness of a source is then computed based on the accuracy of the values that provides. Other more complex methods exploit Bayesian inference to detect copying behaviors and use these insights to better assess source trustworthiness. == Multi-truth methods == Due to its complexity, less attention has been devoted to the study of the multi-truth discovery Below are reported two typologies of multi-truth methods and their characteristics. === Bayesian based === These methods use Bayesian inference to define the probability of a group of values being true conditioned on the values provided by all the data sources. In this case, since there could be multiple true values for each data item, and sources can provide multiple values for a single data item, it is not possible to consider values individually. An alternative is to consider mappings and relations between set of provided values and sources providing them. The trustworthiness of a source is then computed based on the accuracy of the values that provides. More sophisticated methods also consider domain coverage and copying behaviors to better estimate source trustworthiness. === Probabilistic Graphical Models based === These methods use probabilistic graphical models to automatically define the set of true values of given data item and also to assess source quality without need of any supervision. == Applications == Many real-world applications can benefit from the use of truth discovery algorithms. Typical domains of application include: healthcare, crowd/social sensing, crowdsourcing aggregation, information extraction and knowledge base construction. Truth discovery algorithms could be also used to revolutionize the way in which web pages are ranked in search engines, going from current methods based on link analysis like PageRank, to procedures that rank web pages based on the accuracy of the information they provide.
Read more →
Manual override

A manual override (MO) or manual analog override (MAO) is a mechanism where control is taken from an automated system and given to the user. For example, a manual override in photography refers to the ability for the human photographer to turn off the automatic aperture sizing, automatic focusing, or any other automated system on the camera. Some manual overrides can be used to veto an automated system's judgment when the system is in error. An example of this is a printer's ink level detection: in one case, a researcher found that when he overrode the system, up to 38% more pages could be printed at good quality by the printer than the automated system would have allowed. Automated systems are becoming increasingly common and integrated into everyday objects such as automobiles and domestic appliances. This development of ubiquitous computing raises general issues of policy and law about the need for manual overrides for matters of great importance such as life-threatening situations and major economic decisions. The loyalty of such autonomous devices then becomes an issue. If they follow rules installed by the manufacturer or required by law and refuse to cede control in some situations then the owners of the devices may feel disempowered, alienated and lacking true ownership. == Major incidents == China Airlines Flight 140 crashed, causing many deaths, due to a misunderstanding about the manual overrides for the autopilot. The Take-Off/Go Around system had been activated to abort a landing. It was programmed to ignore manual controls in this situation but the human pilots tried to continue the landing. The conflicting control signals from the pilots and autopilot then resulted in the aircraft stalling and crashing. The autopilot for this aircraft type was then reprogrammed so that it would never ignore a manual override.
Read more →
Qlone

Qlone is a 3D scanning app based on photogrammetry for creation of 3D models on mobile devices. The resultant 3D models can be exported for external use. Qlone was featured at the Apple Worldwide Developers Conference in 2021. It was also featured on BBC Click. == Qlone features == === 3D scanning === 3D scanning with Qlone requires the use of an included mat design. The user prints the mat onto a sheet of paper, then places the object to be scanned in the centre of the mat. An augmented reality dome within the Qlone app guides the user through the subsequent scanning process. The iOS version of Qlone allows scanning without the mat. === 3D editing === Qlone's editing features allow users to adjust 3D scanned models using texture mapping, polygon mesh size simplification, digital sculpting, cleaning and smoothing, and artistic effects. === File export === Qlone exports directly to multiple 3D platforms including SketchFab, i.materialise, Lens Studio for Snapchat, Shapeways and CGTrader. Models can also be exported in different 3D formats for use in other 3D tools – OBJ, STL, FBX, USDZ, GLB (Binary gLTF), PLY, and X3D. == Use in Science, Education and Academia == Due to its inexpensive, simple and accessible nature for creating 3D models, Qlone was used in many academically educational and scientific research projects. The European Space Agency used Qlone to scan rocks in a Tele-Robotic rock collection experiment. Neurosurgeons from the University of Southern California and surgeons from Tulane University School of Medicine used Qlone to create 3D models of cadaveric specimens and anatomical models with the aim of increasing access to such components for enhancing anatomy training and allowing realistic surgical simulations for neurosurgeons and practitioners worldwide. Archaeologists from Texas A&M University used Qlone to create 3D replicas of artifacts and models and students from Vancouver iTech Preparatory Middle School used Qlone to create 3D scans of more than 100 artifacts from Fort Vancouver National Historic Site.
Read more →
RIPAC (microprocessor)

RIPAC was a VLSI single-chip microprocessor designed for automatic recognition of the connected speech, one of the first of this use. The project of the microprocessor RIPAC started in 1984. RIPAC was aimed to provide efficient real-time speech recognition services to the italian telephone system provided by SIP. The microprocessor was presented in September 1986 at The Hague (Netherlands) at EUSPICO conference. It was composed of 70.000 transistors and structured as Harvard architecture. The name RIPAC is the acronym for "Riconoscimento del PArlato Connesso", that means "Recognition of the connected speech" in Italian. The microprocessor was designed by the Italian companies CSELT and ELSAG and was produced by SGS: a combination of Hidden Markov Model and Dynamic Time Warping algorithms was used for processing speech signals. It was able to do real-time speech recognition of Italian and many languages with a good affordability. The chip, issued by U.S. Patent No. 4,907,278, worked at first run.
Read more →
Semantic folding

Semantic folding theory describes a procedure for encoding the semantics of natural language text in a semantically grounded binary representation. This approach provides a framework for modelling how language data is processed by the neocortex. == Theory == Semantic folding theory draws inspiration from Douglas R. Hofstadter's Analogy as the Core of Cognition which suggests that the brain makes sense of the world by identifying and applying analogies. The theory hypothesises that semantic data must therefore be introduced to the neocortex in such a form as to allow the application of a similarity measure and offers, as a solution, the sparse binary vector employing a two-dimensional topographic semantic space as a distributional reference frame. The theory builds on the computational theory of the human cortex known as hierarchical temporal memory (HTM), and positions itself as a complementary theory for the representation of language semantics. A particular strength claimed by this approach is that the resulting binary representation enables complex semantic operations to be performed simply and efficiently at the most basic computational level. == Two-dimensional semantic space == Analogous to the structure of the neocortex, Semantic Folding theory posits the implementation of a semantic space as a two-dimensional grid. This grid is populated by context-vectors in such a way as to place similar context-vectors closer to each other, for instance, by using competitive learning principles. This vector space model is presented in the theory as an equivalence to the well known word space model described in the information retrieval literature. Given a semantic space (implemented as described above) a word-vector can be obtained for any given word Y by employing the following algorithm: For each position X in the semantic map (where X represents cartesian coordinates) if the word Y is contained in the context-vector at position X then add 1 to the corresponding position in the word-vector for Y else add 0 to the corresponding position in the word-vector for Y The result of this process will be a word-vector containing all the contexts in which the word Y appears and will therefore be representative of the semantics of that word in the semantic space. It can be seen that the resulting word-vector is also in a sparse distributed representation (SDR) format [Schütze, 1993] & [Sahlgreen, 2006]. Some properties of word-SDRs that are of particular interest with respect to computational semantics are: high noise resistance: As a result of similar contexts being placed closer together in the underlying map, word-SDRs are highly tolerant of false or shifted "bits". boolean logic: It is possible to manipulate word-SDRs in a meaningful way using boolean (OR, AND, exclusive-OR) and/or arithmetical (SUBtract) functions . sub-sampling: Word-SDRs can be sub-sampled to a high degree without any appreciable loss of semantic information. topological two-dimensional representation: The SDR representation maintains the topological distribution of the underlying map therefore words with similar meanings will have similar word-vectors. This suggests that a variety of measures can be applied to the calculation of semantic similarity, from a simple overlap of vector elements, to a range of distance measures such as: Euclidean distance, Hamming distance, Jaccard distance, cosine similarity, Levenshtein distance, Sørensen-Dice index, etc. == Semantic spaces == Semantic spaces in the natural language domain aim to create representations of natural language that are capable of capturing meaning. The original motivation for semantic spaces stems from two core challenges of natural language: Vocabulary mismatch (the fact that the same meaning can be expressed in many ways) and ambiguity of natural language (the fact that the same term can have several meanings). The application of semantic spaces in natural language processing (NLP) aims at overcoming limitations of rule-based or model-based approaches operating on the keyword level. The main drawback with these approaches is their brittleness, and the large manual effort required to create either rule-based NLP systems or training corpora for model learning. Rule-based and machine learning-based models are fixed on the keyword level and break down if the vocabulary differs from that defined in the rules or from the training material used for the statistical models. Research in semantic spaces dates back more than 20 years. In 1996, two papers were published that raised a lot of attention around the general idea of creating semantic spaces: latent semantic analysis from Microsoft and Hyperspace Analogue to Language from the University of California. However, their adoption was limited by the large computational effort required to construct and use those semantic spaces. A breakthrough with regard to the accuracy of modelling associative relations between words (e.g. "spider-web", "lighter-cigarette", as opposed to synonymous relations such as "whale-dolphin", "astronaut-driver") was achieved by explicit semantic analysis (ESA) in 2007. ESA was a novel (non-machine learning) based approach that represented words in the form of vectors with 100,000 dimensions (where each dimension represents an Article in Wikipedia). However practical applications of the approach are limited due to the large number of required dimensions in the vectors. More recently, advances in neural networking techniques in combination with other new approaches (tensors) led to a host of new recent developments: Word2vec from Google and GloVe from Stanford University. Semantic folding represents a novel, biologically inspired approach to semantic spaces where each word is represented as a sparse binary vector with 16,000 dimensions (a semantic fingerprint) in a 2D semantic map (the semantic universe). Sparse binary representation are advantageous in terms of computational efficiency, and allow for the storage of very large numbers of possible patterns. == Visualization == The topological distribution over a two-dimensional grid (outlined above) lends itself to a bitmap type visualization of the semantics of any word or text, where each active semantic feature can be displayed as e.g. a pixel. As can be seen in the images shown here, this representation allows for a direct visual comparison of the semantics of two (or more) linguistic items. Image 1 clearly demonstrates that the two disparate terms "dog" and "car" have, as expected, very obviously different semantics. Image 2 shows that only one of the meaning contexts of "jaguar", that of "Jaguar" the car, overlaps with the meaning of Porsche (indicating partial similarity). Other meaning contexts of "jaguar" e.g. "jaguar" the animal clearly have different non-overlapping contexts. The visualization of semantic similarity using Semantic Folding bears a strong resemblance to the fMRI images produced in a research study conducted by A.G. Huth et al., where it is claimed that words are grouped in the brain by meaning. voxels, little volume segments of the brain, were found to follow a pattern were semantic information is represented along the boundary of the visual cortex with visual and linguistic categories represented on posterior and anterior side respectively.
Read more →
Subvocal recognition

Subvocal recognition (SVR) is the process of taking subvocalization and converting the detected results to a digital output, aural or text-based. A silent speech interface is a device that allows speech communication without using the sound made when people vocalize their speech sounds. It works by the computer identifying the phonemes that an individual pronounces from nonauditory sources of information about their speech movements. These are then used to recreate the speech using speech synthesis. == Input methods == Silent speech interface systems have been created using ultrasound and optical camera input of tongue and lip movements. Electromagnetic devices are another technique for tracking tongue and lip movements. The detection of speech movements by electromyography of speech articulator muscles and the larynx is another technique. Another source of information is the vocal tract resonance signals that get transmitted through bone conduction called non-audible murmurs. They have also been created as a brain–computer interface using brain activity in the motor cortex obtained from intracortical microelectrodes. == Uses == Such devices are created as aids to those unable to create the sound phonation needed for audible speech such as after laryngectomies. Another use is for communication when speech is masked by background noise or distorted by self-contained breathing apparatus. A further practical use is where a need exists for silent communication, such as when privacy is required in a public place, or hands-free data silent transmission is needed during a military or security operation. In 2002, the Japanese company NTT DoCoMo announced it had created a silent mobile phone using electromyography and imaging of lip movement. The company stated that "the spur to developing such a phone was ridding public places of noise," adding that, "the technology is also expected to help people who have permanently lost their voice." The feasibility of using silent speech interfaces for practical communication has since then been shown. In 2019, Arnav Kapur, a researcher from the Massachusetts Institute of Technology, conducted a study known as AlterEgo. Its implementation of the silent speech interface enables direct communication between the human brain and external devices through stimulation of the speech muscles. By leveraging neural signals associated with speech and language, the AlterEgo system deciphers the user's intended words and translates them into text or commands without the need for audible speech. == Research and patents == With a grant from the U.S. Army, research into synthetic telepathy using subvocalization is taking place at the University of California, Irvine under lead scientist Mike D'Zmura. NASA's Ames Research Laboratory in Mountain View, California, under the supervision of Charles Jorgensen is conducting subvocalization research. The Brain Computer Interface R&D program at Wadsworth Center under the New York State Department of Health has confirmed the existing ability to decipher consonants and vowels from imagined speech, which allows for brain-based communication using imagined speech, however using EEGs instead of subvocalization techniques. US Patents on silent communication technologies include: US Patent 6587729 "Apparatus for audibly communicating speech using the radio frequency hearing effect", US Patent 5159703 "Silent subliminal presentation system", US Patent 6011991 "Communication system and method including brain wave analysis and/or use of brain activity", US Patent 3951134 "Apparatus and method for remotely monitoring and altering brain waves". Latter two rely on brain wave analysis. == In fiction == The decoding of silent speech using a computer played an important role in Arthur C. Clarke's story and Stanley Kubrick's associated film A Space Odyssey. In this, HAL 9000, a computer controlling spaceship Discovery One, bound for Jupiter, discovers a plot to deactivate it by the mission astronauts Dave Bowman and Frank Poole through lip reading their conversations. In Orson Scott Card's series (including Ender's Game), the artificial intelligence can be spoken to while the protagonist wears a movement sensor in his jaw, enabling him to converse with the AI without making noise. He also wears an ear implant. In Speaker for the Dead and subsequent novels, author Orson Scott Card described an ear implant, called a "jewel", that allows subvocal communication with computer systems. Author Robert J. Sawyer made use of subvocal recognition to allow silent commands to the cybernetic 'companion implants' used by the advanced Neanderthal characters in his Neanderthal Parallax trilogy of science fiction novels. In Earth, David Brin depicts this technology and its uses as a normal gear in the near future. In Down and Out in the Magic Kingdom, Cory Doctorow has cellphone technology become silent through a cochlear implant and miking the throat to pick up subvocalization. William Gibson's Sprawl Trilogy frequently uses sub-vocalization systems in various devices. In Kage Baker's Company novels, the immortal cyborgs communicate subvocally. In the Hugo Award-winning Hyperion Cantos by Dan Simmons, the characters often use subvocalization to communicate. In the Culture novels by Iain M. Banks, more highly advanced species often communicate subvocally through their technology. In Deus Ex: Human Revolution (2011), the protagonist is augmented with a subvocalization implant for sending covert communications (and a corresponding cochlear implant for receiving covert communications). In the tabletop RPG and video game series Shadowrun, player characters can communicate via subvocal microphones in some instances. In Paranoia, all citizens can speak to the computer via their "cerebral cortech" implants. Alistair Reynolds Revelation Space trilogy frequently uses sub-vocalization systems in various devices.
Read more →
CodeCheck

CodeCheck is a mobile app that provides consumers with information about the ingredients in cosmetic products, as well as the ingredients and nutritional values of food. Users can access this information by scanning the product’s barcode with a smartphone or by using a text-based search. The app is available for iOS and Android devices in Germany, Austria, Switzerland, the United Kingdom, the United States, and the Netherlands. == History == CodeCheck was founded in 2010 as an association, online database, and app by Roman Bleichenbacher, who was then a student in Zurich. A website of the same name had already been launched in 2002, where users could enter information about ingredients, nutritional values, and manufacturers of products. The first round of financing took place in July 2014 and raised over 1.1 million Swiss francs, which coincided with the founding of CodeCheck AG. Investors included Doodle founders Myke Näf and Paul E. Sevinç. The company subsequently expanded to Austria and Germany. In the same year, Boris Manhart became CEO. CodeCheck GmbH was established in Berlin in 2016. The app became available in the United States in 2017 and in the United Kingdom in November 2019. In 2020, it was also launched in the Netherlands. Following insolvency proceedings, the app has been owned by Producto Check GmbH since 2022. == Functions == The app can be used to scan the barcode of food and cosmetic products. It then displays information about ingredients, nutritional values, manufacturers and certification labels. For many years, users were able to enter and edit product information themselves and indicate advantages and disadvantages of individual products. Since 2020, the app has placed greater emphasis on machine text recognition. The collected data is combined with substance ratings using an algorithm. These ratings are based on scientific studies and expert assessments, including those from the Consumer Advice Centre in Hamburg, Greenpeace, the WWF and the German Association for the Environment and Nature Conservation (BUND e. V.), and cannot be modified by users or manufacturers. The app also provides information on the sugar and fat content of food products. In addition, it indicates whether a product contains hormone-active substances, microplastics, palm oil, animal-derived ingredients, lactose or gluten. Since 2020, the app has displayed a climate score for food products in cooperation with the Eaternity Institute. == Financing == CodeCheck is primarily financed through native advertising and banner ads. Since 2018, the company has also offered analysis services and survey tools directly to fast-moving consumer goods (FMCG) manufacturers. In addition, access to the API is available, enabling other companies to use the product database. With the introduction of a subscription model in 2019, the CodeCheck app can be used ad-free and in offline mode. Since 2021, CodeCheck has also offered its own “Green Label” certification for manufacturers. Products are certified if at least 90 percent of their ingredients are classified as harmless. == Awards == In May 2015, the app topped the download charts for the first time, reaching 2.3 million installations. By September 2019, the app had once again reached the top of the German app charts, surpassing five million downloads.
Read more →
Transfer function matrix

In control system theory, and various branches of engineering, a transfer function matrix, or just transfer matrix is a generalisation of the transfer functions of single-input single-output (SISO) systems to multiple-input and multiple-output (MIMO) systems. The matrix relates the outputs of the system to its inputs. It is a particularly useful construction for linear time-invariant (LTI) systems because it can be expressed in terms of the s-plane. In some systems, especially ones consisting entirely of passive components, it can be ambiguous which variables are inputs and which are outputs. In electrical engineering, a common scheme is to gather all the voltage variables on one side and all the current variables on the other regardless of which are inputs or outputs. This results in all the elements of the transfer matrix being in units of impedance. The concept of impedance (and hence impedance matrices) has been borrowed into other energy domains by analogy, especially mechanics and acoustics. Many control systems span several different energy domains. This requires transfer matrices with elements in mixed units. This is needed both to describe transducers that make connections between domains and to describe the system as a whole. If the matrix is to properly model energy flows in the system, compatible variables must be chosen to allow this. == General == A MIMO system with m outputs and n inputs is represented by a m × n matrix. Each entry in the matrix is in the form of a transfer function relating an output to an input. For example, for a three-input, two-output system, one might write, [ y 1 y 2 ] = [ g 11 g 12 g 13 g 21 g 22 g 23 ] [ u 1 u 2 u 3 ] {\displaystyle {\begin{bmatrix}y_{1}\\y_{2}\end{bmatrix}}={\begin{bmatrix}g_{11}&g_{12}&g_{13}\\g_{21}&g_{22}&g_{23}\end{bmatrix}}{\begin{bmatrix}u_{1}\\u_{2}\\u_{3}\end{bmatrix}}} where the un are the inputs, the ym are the outputs, and the gmn are the transfer functions. This may be written more succinctly in matrix operator notation as, Y = G U {\displaystyle \mathbf {Y} =\mathbf {G} \mathbf {U} } where Y is a column vector of the outputs, G is a matrix of the transfer functions, and U is a column vector of the inputs. In many cases, the system under consideration is a linear time-invariant (LTI) system. In such cases, it is convenient to express the transfer matrix in terms of the Laplace transform (in the case of continuous time variables) or the z-transform (in the case of discrete time variables) of the variables. This may be indicated by writing, for instance, Y ( s ) = G ( s ) U ( s ) {\displaystyle \mathbf {Y} (s)=\mathbf {G} (s)\mathbf {U} (s)} which indicates that the variables and matrix are in terms of s, the complex frequency variable of the s-plane arising from Laplace transforms, rather than time. The examples in this article are all assumed to be in this form, although that is not explicitly indicated for brevity. For discrete time systems s is replaced by z from the z-transform, but this makes no difference to subsequent analysis. The matrix is particularly useful when it is a proper rational matrix, that is, all its elements are proper rational functions. In this case, the state-space representation can be applied. In systems engineering, the overall system transfer matrix G (s) is decomposed into two parts: H (s) representing the system being controlled, and C(s) representing the control system. C (s) takes as its inputs the inputs of G (s) and the outputs of H (s). The outputs of C (s) form the inputs for H (s). == Electrical systems == In electrical systems, it is often the case that the distinction between input and output variables is ambiguous. They can be either, depending on circumstance and point of view. In such cases, the concept of port (a place where energy is transferred from one system to another) can be more useful than input and output. It is customary to define two variables for each port (p): the voltage across it (Vp) and the current entering it (Ip). For instance, the transfer matrix of a two-port network can be defined as follows, [ V 1 V 2 ] = [ z 11 z 12 z 21 z 22 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\\\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} where the zmn are called the impedance parameters, or z-parameters. They are so-called because they are in units of impedance and relate port currents to a port voltage. The z-parameters are not the only way that transfer matrices are defined for two-port networks. Six basic matrices relate voltages and currents, each with advantages for particular system network topologies. However, only two of these can be extended beyond two ports to an arbitrary number of ports. These two are the z-parameters and their inverse, the admittance parameters or y-parameters. To understand the relationship between port voltages and currents and inputs and outputs, consider the simple voltage divider circuit. If we only wish to consider the output voltage (V2) resulting from applying the input voltage (V1) then the transfer function can be expressed as, [ V 2 ] = [ R 2 R 1 + R 2 ] [ V 1 ] {\displaystyle {\begin{bmatrix}V_{2}\end{bmatrix}}={\begin{bmatrix}{\dfrac {R_{2}}{R_{1}+R_{2}}}\end{bmatrix}}{\begin{bmatrix}V_{1}\end{bmatrix}}} which can be considered the trivial case of a 1×1 transfer matrix. The expression correctly predicts the output voltage if there is no current leaving port 2, but is increasingly inaccurate as the load increases. If, however, we attempt to use the circuit in reverse, driving it with a voltage at port 2 and calculate the resulting voltage at port 1 the expression gives completely the wrong result even with no load on port 1. It predicts a greater voltage at port 1 than was applied at port 2, an impossibility with a purely resistive circuit like this one. To correctly predict the behaviour of the circuit, the currents entering or leaving the ports must also be taken into account, which is what the transfer matrix does. The impedance matrix for the voltage divider circuit is, [ V 1 V 2 ] = [ R 1 + R 2 R 2 R 2 R 2 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}R_{1}+R_{2}&R_{2}\\R_{2}&R_{2}\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} which fully describes its behaviour under all input and output conditions. At microwave frequencies, none of the transfer matrices based on port voltages and currents are convenient to use in practice. Voltage is difficult to measure directly, current next to impossible, and the open circuits and short circuits required by the measurement technique cannot be achieved with any accuracy. For waveguide implementations, circuit voltage and current are entirely meaningless. Transfer matrices using different sorts of variables are used instead. These are the powers transmitted into, and reflected from a port, which are readily measured in the transmission line technology used in distributed-element circuits in the microwave band. The most well-known and widely used of these sorts of parameters is the scattering parameters, or s-parameters. == Mechanical and other systems == The concept of impedance can be extended into the mechanical and other domains through a mechanical-electrical analogy, hence the impedance parameters and other forms of 2-port network parameters can also be extended to the mechanical domain. To do this, an effort variable and a flow variable are made analogues of voltage and current, respectively. For mechanical systems under translation these variables are force and velocity respectively. Expressing the behaviour of a mechanical component as a two-port or multi-port with a transfer matrix is a useful thing to do because, like electrical circuits, the component can often be operated in reverse and its behaviour is dependent on the loads at the inputs and outputs. For instance, a gear train is often characterised simply by its gear ratio, a SISO transfer function. However, the gearbox output shaft can be driven around to turn the input shaft, requiring a MIMO analysis. In this example, the effort and flow variables are torque T and angular velocity ω, respectively. The transfer matrix in terms of z-parameters will look like, [ T 1 T 2 ] = [ z 11 z 12 z 21 z 22 ] [ ω 1 ω 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\T_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\end{bmatrix}}{\begin{bmatrix}\omega _{1}\\\omega _{2}\end{bmatrix}}} However, the z-parameters are not necessarily the most convenient for characterising gear trains. A gear train is the analogue of an electrical transformer and the h-parameters (hybrid parameters) better describe transformers because they directly include the turns ratios (the analogue of gear ratios). The gearbox transfer matrix in h-parameter format is, [ T 1 ω 2 ] = [ h 11 h 12 h 21 h 22 ] [ ω 1 T 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\\omega _{2}\end{bm
Read more →
ISSCO Graphics

Integrated Software Systems Corporation (ISSCO), doing business as ISSCO Graphics, was an American software developer and publisher based in San Diego, California, and active from 1970 to 1986. They were best known for their enterprise graphics software packages, including Tellagraf, CueChart and Disspla. == History == ISSCO Graphics had considered acquiring Breakthrough Software, whose software focus involved PC DOS, as a means of getting into the PC arena, but backed off when Computer Associates made an offer to acquire ISSCO. By early 1987 it was reported that "Issco users breathe sigh of relief" that all was well. The ISSCO User's Group was founded in 1976. ISSCO, which was founded in 1970 by Peter Preuss, was acquired by Computer Associates in 1986. == Notable products == === Tellagraf === ISSCO's Tellagraf is an early software package designed to allow end-users to "turn out full color, professional quality charts" with initial results displayed on a screen, modified as needed, and then "a final 'hard-copy' can be made .. or made into 35mm color transparencies for projection onto a screen." Users of Tellagraf often had access to CueChart and Disspla software. Often computer sites having one had all three. Terminals with varying degrees of graphics, such as the DEC's VT100 and Tektronix's Tektronix 4xxx family of text and graphics terminals. were supported, and the software ran on popular computing platforms. Four years are important to Tellagraf's early history: 1978: ease of use 1980: graphic-artist quality 1982: introduction of CueChart, and recognition by IEEE. 1983: "quality graphics enters the mainstream of data processing with ..." Tellegraf was eventually acquired by Computer Associates and renamed CA-Tellegraf. SAS users found it helpful. Universities, research institutes and financial services firms were among early users. === Disspla === Disspla is a package of data plotting subroutines that can be used from high level languages. It was also acquired by Computer Associates. === Tellaplan === In 1983 ISSCO introduced Tellaplan, "a project planning, report and schedule charting system for Tell-A- Graf users in IBM MVS or CMS or Digital Equipment Corp. VAX computers" atop which they built "two visual project management software packages" three years later.
Read more →
Artifact (app)

Artifact was a personalized social news aggregator app that uses recommender systems to suggest articles. Launched in January 2023 by Nokto, Inc., a company founded by co-founders of Instagram Kevin Systrom and Mike Krieger, the app is available for iOS and Android. The app's name is a portmanteau of the words "articles", "artificial intelligence", and "fact". The app shut down in January 2024 as a result of low interest. == History == Nokto, Inc. was established on March 3, 2022, as a foreign stock company in California, with its headquarters in San Francisco. The company's main product, Artifact, is the first new product launched by Krieger and Systrom since their 2018 resignation from Instagram after conflicts with parent company Meta, which acquired Instagram in 2012. Artifact launched on January 31, 2023, after the team had been working on it for over a year, offering the option to sign up for a waiting list for its private beta, which grew to about 160,000 people, and then launching in open beta on February 22, 2023. With a team of seven employees in San Francisco, the app was free throughout its lifetime, with the founders explaining at the time that different business models - such as advertising or subscription fees - could be explored in the future. In January 2024, cofounder Kevin Systrom announced that the app would be shutting down after concluding that "the market opportunity isn’t big enough to warrant continued investment in this way." In April 2024, it was announced Artifact had been acquired by Yahoo, who intended to use the service's technology in an upgraded Yahoo! News app. == Features == Frequently described as "TikTok for text" and a competitor to Twitter, Artifact was a news aggregator that used machine learning to make personalized recommendations based on topics, news sources, and authors that the reader is interested in. In addition to reading articles, the app offered the ability to like articles, leave comments, or listen to an audio version of an article read by AI-generated voices, including a simulation of the voices of Snoop Dogg or Gwyneth Paltrow. AI also would rewrite clickbait headlines that users flagged. Artifact later expanded to a social network where users could post links, images and text to their profile, which could be liked or commented on by other users. Similar to other social news websites like Reddit, reader accounts had profiles with reputation scores.
Read more →
Outline of robotics

The following outline is provided as an overview of and topical guide to robotics: Robotics is a branch of mechanical engineering, electrical engineering and computer science that deals with the design, construction, operation, and application of robots, as well as computer systems for their control, sensory feedback, and information processing. These technologies deal with automated machines that can take the place of humans in dangerous environments or manufacturing processes, or resemble humans in appearance, behaviour, and or cognition. Many of today's robots are inspired by nature contributing to the field of bio-inspired robotics. The word "robot" was introduced to the public by Czech writer Karel Čapek in his play R.U.R. (Rossum's Universal Robots), published in 1920. The term "robotics" was coined by Isaac Asimov in his 1941 science fiction short-story "Liar!" == Nature of robotics == Robotics can be described as: An applied science – scientific knowledge transferred into a physical environment. A branch of computer science – A branch of electrical engineering – A branch of mechanical engineering – Research and development – A branch of technology – == Branches of robotics == Adaptive control – control method used by a controller which must adapt to a controlled system with parameters which vary, or are initially uncertain. For example, as an aircraft flies, its mass will slowly decrease as a result of fuel consumption; a control law is needed that adapts itself to such changing conditions. Aerial robotics – development of unmanned aerial vehicles (UAVs), commonly known as drones, aircraft without a human pilot aboard. Their flight is controlled either autonomously by onboard computers or by the remote control of a pilot on the ground or in another vehicle. Android science – interdisciplinary framework for studying human interaction and cognition based on the premise that a very humanlike robot (that is, an android) can elicit human-directed social responses in human beings. Anthrobotics – science of developing and studying robots that are either entirely or in some way human-like. Artificial intelligence – the intelligence of machines and the branch of computer science that aims to create it. Artificial neural networks – a mathematical model inspired by biological neural networks. Autonomous car – an autonomous vehicle capable of fulfilling the human transportation capabilities of a traditional car Autonomous research robotics – Bayesian network – BEAM robotics – a style of robotics that primarily uses simple analogue circuits instead of a microprocessor in order to produce an unusually simple design (in comparison to traditional mobile robots) that trades flexibility for robustness and efficiency in performing the task for which it was designed. Behavior-based robotics – the branch of robotics that incorporates modular or behavior based AI (BBAI). Bio-inspired robotics – making robots that are inspired by biological systems. Biomimicry and bio-inspired design are sometimes confused. Biomimicry is copying the nature while bio-inspired design is learning from nature and making a mechanism that is simpler and more effective than the system observed in nature. Biomimetic – see Bionics. Biomorphic robotics – a sub-discipline of robotics focused upon emulating the mechanics, sensor systems, computing structures and methodologies used by animals. Bionics – also known as biomimetics, biognosis, biomimicry, or bionical creativity engineering is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. Biorobotics – a study of how to make robots that emulate or simulate living biological organisms mechanically or even chemically. Cloud robotics – is a field of robotics that attempts to invoke cloud technologies such as cloud computing, cloud storage, and other Internet technologies centered around the benefits of converged infrastructure and shared services for robotics. Cognitive robotics – views animal cognition as a starting point for the development of robotic information processing, as opposed to more traditional Artificial Intelligence techniques. Clustering – Computational neuroscience – study of brain function in terms of the information processing properties of the structures that make up the nervous system. Robot control – a study of controlling robots Robotics conventions – Data mining Techniques – Degrees of freedom – in mechanics, the degree of freedom (DOF) of a mechanical system is the number of independent parameters that define its configuration. It is the number of parameters that determine the state of a physical system and is important to the analysis of systems of bodies in mechanical engineering, aeronautical engineering, robotics, and structural engineering. Developmental robotics – a methodology that uses metaphors from neural development and developmental psychology to develop the mind for autonomous robots Digital control – a branch of control theory that uses digital computers to act as system controllers. Digital image processing – the use of computer algorithms to perform image processing on digital images. Dimensionality reduction – the process of reducing the number of random variables under consideration, and can be divided into feature selection and feature extraction. Distributed robotics – Electronic stability control – is a computerized technology that improves the safety of a vehicle's stability by detecting and reducing loss of traction (skidding). Evolutionary computation – Evolutionary robotics – a methodology that uses evolutionary computation to develop controllers for autonomous robots Extended Kalman filter – Flexible Distribution functions – Feedback control and regulation – Human–computer interaction – a study, planning and design of the interaction between people (users) and computers Human robot interaction – a study of interactions between humans and robots Intelligent vehicle technologies – comprise electronic, electromechanical, and electromagnetic devices - usually silicon micromachined components operating in conjunction with computer controlled devices and radio transceivers to provide precision repeatability functions (such as in robotics artificial intelligence systems) emergency warning validation performance reconstruction. Computer vision – Machine vision – Kinematics – study of motion, as applied to robots. This includes both the design of linkages to perform motion, their power, control and stability; also their planning, such as choosing a sequence of movements to achieve a broader task. Laboratory robotics – the act of using robots in biology or chemistry labs Robot learning – learning to perform tasks such as obstacle avoidance, control and various other motion-related tasks Direct manipulation interface – In computer science, direct manipulation is a human–computer interaction style which involves continuous representation of objects of interest and rapid, reversible, and incremental actions and feedback. The intention is to allow a user to directly manipulate objects presented to them, using actions that correspond at least loosely to the physical world. Manifold learning – Microrobotics – a field of miniature robotics, in particular mobile robots with characteristic dimensions less than 1 mm Motion planning – (a.k.a., the "navigation problem", the "piano mover's problem") is a term used in robotics for the process of detailing a task into discrete motions. Motor control – information processing related activities carried out by the central nervous system that organize the musculoskeletal system to create coordinated movements and skilled actions. Nanorobotics – the emerging technology field creating machines or robots whose components are at or close to the scale of a nanometer (10−9 meters). Passive dynamics – refers to the dynamical behavior of actuators, robots, or organisms when not drawing energy from a supply (e.g., batteries, fuel, ATP). Programming by Demonstration – an End-user development technique for teaching a computer or a robot new behaviors by demonstrating the task to transfer directly instead of programming it through machine commands. Quantum robotics – a subfield of robotics that deals with using quantum computers to run robotics algorithms more quickly than digital computers can. Rapid prototyping – automatic construction of physical objects via additive manufacturing from virtual models in computer aided design (CAD) software, transforming them into thin, virtual, horizontal cross-sections and then producing successive layers until the items are complete. As of June 2011, used for making models, prototype parts, and production-quality parts in relatively small numbers. Reinforcement learning – an area of machine learning in computer science, concerned with how an agent ought to take actions in an environment so as to maximize some notion of cumulative reward. Robot
Read more →
AARON

AARON is the collective name for a series of computer programs written by artist Harold Cohen that create original artistic images autonomously, which set it apart from previous programs. Proceeding from Cohen's initial question "What are the minimum conditions under which a set of marks functions as an image?", AARON was in development between 1972 and the 2010s. As the software is not open source, its development effectively ended with Cohen's death in 2016. The name "AARON" does not seem to be an acronym; rather, it was a name chosen to start with the letter "A" so that the names of successive programs could follow it alphabetically. However, Cohen did not create any other major programs. Initial versions of AARON created abstract drawings that grew more complex through the 1970s. More representational imagery was added in the 1980s; first rocks, then plants, then people. In the 1990s more representational figures set in interior scenes were added, along with color. AARON returned to more abstract imagery, this time in color, in the early 2000s. Cohen used machines that allowed AARON to produce physical artwork. The first machines drew in black and white using a succession of custom-built "turtle" and flatbed plotter devices. Cohen would sometimes color these images by hand in fabric dye (Procion), or scale them up to make larger paintings and murals. In the 1990s Cohen built a series of digital painting machines to output AARON's images in ink and fabric dye. His later work used a large-scale inkjet printer on canvas. Development of AARON began in the C programming language then switched to Lisp in the early 1990s. Cohen credits Lisp with helping him solve the challenges he faced in adding color capabilities to AARON. An article about Cohen appeared in Computer Answers that describes AARON and shows two line drawings that were exhibited at the Tate gallery. The article goes on to describe the workings of AARON, then running on a DEC VAX 750 minicomputer. Raymond Kurzweil's company has produced a downloadable screensaver of AARON for Microsoft Windows PCs. This version of AARON can also produce printable images. AARON's source code is not publicly available, but Cohen has described AARON's operations in various essays and it is discussed in abstract in Pamela McCorduck's book. AARON cannot learn new styles or imagery on its own; each new capability must be hand-coded by Cohen. It is capable of producing a practically infinite supply of distinct images in its own style. Examples of these images have been exhibited in galleries worldwide. AARON's artwork has been used as an artistic equivalent of the Turing test. It does seem however that AARON's output follows a noticeable formula (figures standing next to a potted plant, framed within a colored square is a common theme). Cohen is very careful not to claim that AARON is creative. But he does ask "If what AARON is making is not art, what is it exactly, and in what ways, other than its origin, does it differ from the 'real thing?' If it is not thinking, what exactly is it doing?" — The further exploits of AARON, Painter. The Whitney Museum featured AARON in 2024, showcasing the evolution of AARON as the earliest artificial intelligence (AI) program for artmaking.
Read more →
Gödel machine

A Gödel machine is a hypothetical self-improving computer program that solves problems in an optimal way. It uses a recursive self-improvement protocol in which it rewrites its own code when it can prove the new code provides a better strategy. The machine was invented by Jürgen Schmidhuber (first proposed in 2003), but is named after Kurt Gödel who inspired the mathematical theories. The Gödel machine is often discussed when dealing with issues of meta-learning, also known as "learning to learn." Applications include automating human design decisions and transfer of knowledge between multiple related tasks, and may lead to design of more robust and general learning architectures. Though theoretically possible, no full implementation has been created. The Gödel machine is often compared with Marcus Hutter's AIXI, another formal specification for an artificial general intelligence. Schmidhuber points out that the Gödel machine could start out by implementing AIXItl as its initial sub-program, and self-modify after it finds proof that another algorithm for its search code will be better. == Limitations == Traditional problems solved by a computer only require one input and provide some output. Computers of this sort had their initial algorithm hardwired. This does not take into account the dynamic natural environment, and thus was a goal for the Gödel machine to overcome. The Gödel machine has limitations of its own, however. According to Gödel's First Incompleteness Theorem, any formal system that encompasses arithmetic is either flawed or allows for statements that cannot be proved in the system. Hence even a Gödel machine with unlimited computational resources must ignore those self-improvements whose effectiveness it cannot prove. == Variables of interest == There are three variables that are particularly useful in the run time of the Gödel machine. At some time t {\displaystyle t} , the variable time {\displaystyle {\text{time}}} will have the binary equivalent of t {\displaystyle t} . This is incremented steadily throughout the run time of the machine. Any input meant for the Gödel machine from the natural environment is stored in variable x {\displaystyle x} . It is likely the case that x {\displaystyle x} will hold different values for different values of variable time {\displaystyle {\text{time}}} . The outputs of the Gödel machine are stored in variable y {\displaystyle y} , where y ( t ) {\displaystyle y(t)} would be the output bit-string at some time t {\displaystyle t} . At any given time t {\displaystyle t} , where ( 1 ≤ t ≤ T ) {\displaystyle (1\leq t\leq T)} , the goal is to maximize future success or utility. A typical utility function follows the pattern u ( s , E n v ) : S × E → R {\displaystyle u(s,\mathrm {Env} ):S\times E\rightarrow \mathbb {R} } : u ( s , E n v ) = E μ [ ∑ τ = time T r ( τ ) ∣ s , E n v ] {\displaystyle u(s,\mathrm {Env} )=E_{\mu }{\Bigg [}\sum _{\tau ={\text{time}}}^{T}r(\tau )\mid s,\mathrm {Env} {\Bigg ]}} where r ( t ) {\displaystyle r(t)} is a real-valued reward input (encoded within s ( t ) {\displaystyle s(t)} ) at time t {\displaystyle t} , E μ [ ⋅ ∣ ⋅ ] {\displaystyle E_{\mu }[\cdot \mid \cdot ]} denotes the conditional expectation operator with respect to some possibly unknown distribution μ {\displaystyle \mu } from a set M {\displaystyle M} of possible distributions ( M {\displaystyle M} reflects whatever is known about the possibly probabilistic reactions of the environment), and the above-mentioned time = time ⁡ ( s ) {\displaystyle {\text{time}}=\operatorname {time} (s)} is a function of state s {\displaystyle s} which uniquely identifies the current cycle. Note that we take into account the possibility of extending the expected lifespan through appropriate actions. == Instructions used by proof techniques == The nature of the six proof-modifying instructions below makes it impossible to insert an incorrect theorem into proof, thus trivializing proof verification. === get-axiom(n) === Appends the n-th axiom as a theorem to the current theorem sequence. Below is the initial axiom scheme: Hardware Axioms formally specify how components of the machine could change from one cycle to the next. Reward Axioms define the computational cost of hardware instruction and the physical cost of output actions. Related Axioms also define the lifetime of the Gödel machine as scalar quantities representing all rewards/costs. Environment Axioms restrict the way new inputs x are produced from the environment, based on previous sequences of inputs y. Uncertainty Axioms/String Manipulation Axioms are standard axioms for arithmetic, calculus, probability theory, and string manipulation that allow for the construction of proofs related to future variable values within the Gödel machine. Initial State Axioms contain information about how to reconstruct parts or all of the initial state. Utility Axioms describe the overall goal in the form of utility function u. === apply-rule(k, m, n) === Takes in the index k of an inference rule (such as Modus tollens, Modus ponens), and attempts to apply it to the two previously proved theorems m and n. The resulting theorem is then added to the proof. === delete-theorem(m) === Deletes the theorem stored at index m in the current proof. This helps to mitigate storage constraints caused by redundant and unnecessary theorems. Deleted theorems can no longer be referenced by the above apply-rule function. === set-switchprog(m, n) === Replaces switchprog S pm:n, provided it is a non-empty substring of S p. === check() === Verifies whether the goal of the proof search has been reached. A target theorem states that given the current axiomatized utility function u (Item 1f), the utility of a switch from p to the current switchprog would be higher than the utility of continuing the execution of p (which would keep searching for alternative switchprogs). === state2theorem(m, n) === Takes in two arguments, m and n, and attempts to convert the contents of Sm:n into a theorem. == Example applications == === Time-limited NP-hard optimization === The initial input to the Gödel machine is the representation of a connected graph with a large number of nodes linked by edges of various lengths. Within given time T it should find a cyclic path connecting all nodes. The only real-valued reward will occur at time T. It equals 1 divided by the length of the best path found so far (0 if none was found). There are no other inputs. The by-product of maximizing expected reward is to find the shortest path findable within the limited time, given the initial bias. === Fast theorem proving === Prove or disprove as quickly as possible that all even integers > 2 are the sum of two primes (Goldbach’s conjecture). The reward is 1/t, where t is the time required to produce and verify the first such proof. === Maximizing expected reward with bounded resources === A cognitive robot that needs at least 1 liter of gasoline per hour interacts with a partially unknown environment, trying to find hidden, limited gasoline depots to occasionally refuel its tank. It is rewarded in proportion to its lifetime, and dies after at most 100 years or as soon as its tank is empty or it falls off a cliff, and so on. The probabilistic environmental reactions are initially unknown but assumed to be sampled from the axiomatized Speed Prior, according to which hard-to-compute environmental reactions are unlikely. This permits a computable strategy for making near-optimal predictions. One by-product of maximizing expected reward is to maximize expected lifetime.
Read more →
Group of Governmental Experts on Lethal Autonomous Weapons Systems

The Group of Governmental Experts on Lethal Autonomous Weapons Systems, commonly known as the GGE on LAWS, refers to a group of governmental experts established under the framework of the Convention on Certain Conventional Weapons (CCW), a United Nations arms control framework. The group examines legal, ethical, societal and moral questions that arise from the increased use of autonomous robots to carry weapons and to be programmed to engage in combat in various situations that might arise, including battles between countries, or in patrolling border areas or sensitive areas, or other similar roles. As of 18 March 2025, the Convention on Certain Conventional Weapons had 128 High Contracting Parties. In the Geneva Conventions, the term "High Contracting Parties" refers to the states that have joined the conventions and are therefore bound to uphold them. Among the countries that have joined are states with tense relations or ongoing armed conflict with one another, including Russia and Ukraine, Israel and the State of Palestine, and Pakistan and Afghanistan. == Background == In 2013, the Meeting of State Parties to the Convention on Certain Conventional Weapons agreed on a mandate on lethal autonomous weapon systems and tasked its chairperson with convening an informal Meeting of Experts to discuss issues related to emerging technologies in the area of LAWS. Those informal Meetings of Experts were then held in 2014, 2015 and 2016, and their reports fed into subsequent meetings of the High Contracting Parties. At the Fifth CCW Review Conference in 2016, the High Contracting Parties decided to establish an open-ended Group of Governmental Experts on emerging technologies in the area of LAWS, building on the earlier expert meetings. Since then, the group has been reconvened annually. In 2023, the Meeting of the High Contracting Parties to the CCW decided that the GGE on LAWS would continue its work in 2024 and 2025. The group was tasked with developing, by consensus, elements of a possible instrument, without predetermining its form, as well as other measures addressing lethal autonomous weapon systems, drawing on existing CCW protocols, earlier recommendations, state proposals, and legal, military, and technological expertise. == 2024 == In 2024, the GGE met twice, and the group was chaired by Robert in den Bosch, the Netherlands' disarmament ambassador. The 2024 Meeting of the High Contracting Parties decided that the group would meet for 10 days in 2025, in two five-day sessions, and reaffirmed its mandate to continue work by consensus on possible elements of an instrument and other measures addressing lethal autonomous weapon systems. == 2025 == At its first 2025 session, held in Geneva from 3 to 7 March 2025, the Group of Governmental Experts on Lethal Autonomous Weapon Systems discussed revisions to the chair's rolling text. The text was structured into five sections, or "boxes", though delegates held differing views on whether headings were useful or appropriate. Broadly, the discussions covered the characterization of lethal autonomous weapon systems, the application of international humanitarian law, possible prohibitions and regulations, legal review, and questions of accountability and responsibility. At its second session, held from 1 to 5 September 2025, delegations continued work on the chair's rolling text, which set out elements of a possible instrument and was organized into five thematic "boxes". == 2026 == === Developments before the 2026 session === A few weeks before the meeting, autonomous weapons drew renewed attention when the United States pressured Anthropic to revise the terms of use for its AI model Claude. Anthropic prohibited the model's use for mass domestic surveillance and for fully autonomous weapons operating without human oversight, while reports also emerged that OpenAI had reached an agreement with the U.S. Department of War for the use of its AI models, reportedly stipulating that they would not independently direct autonomous weapons where human control was required. The U.S. military nevertheless continued to use Claude during its war on Iran, and there was increasing alarm about the use of AI-assisted semi-autonomous weapons in conflicts including those in Ukraine, Sudan, Gaza, and Iran. Before the start of the sessions, Robert in den Bosch, as chair, warned that progress was urgent because technological developments were moving quickly. At the same time, although states agreed that international humanitarian law applied to LAWS, specific internationally binding standards governing such systems remained largely absent. A key divide before the session was that Russia and the United States opposed new legally binding instruments, while other states argued that new rules were necessary. According to Robert in den Bosch, the talks could lead to new rules, amendments to an existing convention, or a new treaty. === First session === From 2 to 6 March 2026, the group held its penultimate session under the group's three-year mandate. Delegations discussed the chair's rolling draft text, circulated in December 2025, on elements of a possible instrument or other measures concerning lethal autonomous weapon systems. In revised text circulated by the chair on 5 March 2026, a lethal autonomous weapon system was characterized as "a functionally integrated combination of one or more weapons and technological components, that can identify, select, and engage a target, without intervention by a human operator in the execution of these tasks". The text was divided into five boxes to structure discussion. During the session, delegates conducted a first reading of the draft text, and the chair later circulated revised language for several sections. Informal consultations were also held. According to campaign groups and participating observers, support grew during the week for moving to negotiations on the basis of the rolling text, with more than 70 states said to support that step by the end of the session, though some participants warned that attempts to bridge differences risked blurring the group's core purpose. The International Committee of the Red Cross argued that the text should not only restate existing international humanitarian law, but also clarify how those rules apply to autonomous weapons and set out additional measures tailored to the specific challenges such systems raise. Stop Killer Robots likewise emphasized the need to preserve meaningful human judgment and control over increasingly autonomous systems. During the discussions, the U.S. delegation opposed the term "human control" and reportedly proposed the alternative phrase "good faith human judgment and care". Other delegations rejected that wording as too weak, while many states continued to insist that meaningful human control over weapon systems remained essential.
Read more →
Layers (digital image editing)

Layers are used in digital image editing to separate different elements of an image. A layer can be compared to a transparency on which imaging effects or images are applied and placed over or under an image. Today they are an integral feature of image editors. In the early days of computing, memory was at a premium and the idea of using multi-layered images was considered infeasible in personal computer applications as the tradeoffs were image size and color depth. As the price of memory fell it became feasible to apply the concept of layering to raster images. The first software known to apply the concept of layers was LALF, which was released in 1989 for the NEC PC-9801. LALF's terminology for layers is "cells", after the concept of drawing animation frames over-top of a stencil. Layers were introduced in Western markets by Fauve Matisse (later Macromedia xRes), and then available in Adobe Photoshop 3.0, in 1994, which lead to widespread adoption. In vector image editors that support animation, layers are used to further enable manipulation along a common timeline for the animation; in SVG images, the equivalent to layers are "groups". == Layer types == There are different kinds of layers, and not all of them exist in all programs. They represent a part of a picture, either as pixels or as modification instructions. They are stacked on top of each other, and depending on the order, determine the appearance of the final picture. In graphics software, layers are the different levels at which one can place an object or image file. In the program, layers can be stacked, merged, or defined when creating a digital image. Layers can be partially obscured allowing portions of images within a layer to be hidden or shown in a translucent manner within another image. Layers can also be used to combine two or more images into a single digital image. For the purpose of editing, working with layers allows for applying changes to just one specific layer. == Layer (basic) == The standard layer available to most programs consists of a rectangular, semitransparent picture which may be superimposed over other layers. Some programs require that layers cover the same area as the final canvas, but others offer layers of multiple sizes. Each layer may bear individual settings, such as opacity, blending modes, dynamic filters, and potentially hundreds of other properties. == Layer mask == A layer mask is linked to a layer and hides part of the layer from the picture. What is painted black on the layer mask will not be visible in the final picture. What is grey will be more or less transparent depending on the shade of grey. As the layer mask can be both edited and moved around independently of both the background layer and the layer it applies to, it gives the user the ability to test a lot of different combinations of overlay. == Adjustment layer == An adjustment layer typically applies a common effect like brightness or saturation to other layers. However, as the effect is stored in a separate layer, it is easy to try it out and switch between different alternatives, without changing the original layer. In addition, an adjustment layer can easily be edited, just like a layer mask, so an effect can be applied to just part of the image.
Read more →