AI Chat Character Apps

AI Chat Character Apps — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Neural computation

  Neural computation is the information processing performed by networks of neurons. Neural computation is affiliated with the philosophical tradition of computationalism, which advances the thesis that neural computation explains cognition. Warren McCulloch and Walter Pitts were the first to propose an account of neural activity as being computational in their seminal 1943 paper "A Logical Calculus of the Ideas Immanent in Nervous Activity." There are three general branches of computationalism, including classicism, connectionism, and computational neuroscience. All three branches agree that cognition is computation, however, they disagree on what sorts of computations constitute cognition. The classicism tradition believes that computation in the brain is digital, analogous to digital computing. Both connectionism and computational neuroscience do not require that the computations that realize cognition are necessarily digital computations. However, the two branches greatly disagree upon which sorts of experimental data should be used to construct explanatory models of cognitive phenomena. Connectionists rely upon behavioral evidence to construct models to explain cognitive phenomena, whereas computational neuroscience leverages neuroanatomical and neurophysiological information to construct mathematical models that explain cognition. When comparing the three main traditions of the computational theory of mind, as well as the different possible forms of computation in the brain, it is helpful to define what we mean by computation in a general sense. Computation is the processing of information, otherwise known as variables or entities, according to a set of rules. A rule in this sense is simply an instruction for executing a manipulation on the current state of the variable, in order to produce a specified output. In other words, a rule dictates which output to produce given a certain input to the computing system. A computing system is a mechanism whose components must be functionally organized to process the information in accordance with the established set of rules. The types of information processed by a computing system determine which type of computations it performs. Traditionally in cognitive science, there have been two proposed types of computation related to neural activity, digital and analog, with the vast majority of theoretical work incorporating a digital understanding of cognition. Computing systems that perform digital computation are functionally organized to execute operations on strings of digits with respect to the type and location of the digit on the string. It has been argued that neural spike train signaling implements some form of digital computation, since neural spikes may be considered as discrete units or digits, like 0 or 1—the neuron either fires an action potential or it does not. Accordingly, neural spike trains could be seen as strings of digits. Alternatively, analog computing systems perform manipulations on non-discrete, irreducibly continuous variables, that is, entities that vary continuously as a function of time. These sorts of operations are characterized by systems of differential equations. Neural computation can be studied by, for example, building models of neural computation. Work on artificial neural networks has been somewhat inspired by knowledge of neural computation.

  Read more →
• 

  Codebook

  A codebook is a type of document used for gathering and storing cryptography codes. Originally, codebooks were often literally books, but today "codebook" is a byword for the complete record of a series of codes, regardless of physical format. == Cryptography == In cryptography, a codebook is a document used for implementing a code. A codebook contains a lookup table for coding and decoding; each word or phrase has one or more strings which replace it. To decipher messages written in code, corresponding copies of the codebook must be available at either end. The distribution and physical security of codebooks presents a special difficulty in the use of codes compared to the secret information used in ciphers, the key, which is typically much shorter. The United States National Security Agency documents sometimes use codebook to refer to block ciphers; compare their use of combiner-type algorithm to refer to stream ciphers. Codebooks come in two forms, one-part or two-part: In one-part codes, the plaintext words and phrases and the corresponding code words are in the same alphabetical order. They are organized similar to a standard dictionary. Such codes are half the size of two-part codes but are more vulnerable since an attacker who recovers some code word meanings can often infer the meaning of nearby code words. One-part codes may be used simply to shorten messages for transmission or have their security enhanced with superencryption methods, such as adding a secret number to numeric code words. In two-part codes, one part is for converting plaintext to ciphertext, the other for the opposite purpose. They are usually organized similarly to a language translation dictionary, with plaintext words (in the first part) and ciphertext words (in the second part) presented like dictionary headwords. The earliest known use of a codebook system was by Gabriele de Lavinde in 1379 working for the Antipope Clement VII. Two-part codebooks go back as least as far as Antoine Rossignol in the 1800s. From the 15th century until the middle of the 19th century, nomenclators (named after nomenclator) were the most used cryptographic method. Codebooks with superencryption were the most used cryptographic method of World War I. The JN-25 code used in World War II used a codebook of 30,000 code groups superencrypted with 30,000 random additives. The book used in a book cipher or the book used in a running key cipher can be any book shared by sender and receiver and is different from a cryptographic codebook. == Social sciences == In social sciences, a codebook is a document containing a list of the codes used in a set of data to refer to variables and their values, for example locations, occupations, or clinical diagnoses. == Data compression == Codebooks were also used in 19th- and 20th-century commercial codes for the non-cryptographic purpose of data compression. Codebooks are used in relation to precoding and beamforming in mobile networks such as 5G and LTE. The usage is standardized by 3GPP, for example in the document TS 38.331, NR; Radio Resource Control (RRC); Protocol specification.

  Read more →
• 

  Ciphertext

  In cryptography, ciphertext or cyphertext is the result of encryption performed on plaintext using an algorithm, called a cipher. Ciphertext is also known as encrypted or encoded information because it contains a form of the original plaintext that is unreadable by a human or computer without the proper cipher to decrypt it. This process prevents the loss of sensitive information via hacking. Decryption, the inverse of encryption, is the process of turning ciphertext into readable plaintext. Ciphertext is not to be confused with codetext, because the latter is a result of a code, not a cipher. == Conceptual underpinnings == Let m {\displaystyle m\!} be the plaintext message that Alice wants to secretly transmit to Bob and let E k {\displaystyle E_{k}\!} be the encryption cipher, where k {\displaystyle _{k}\!} is a cryptographic key. Alice must first transform the plaintext into ciphertext, c {\displaystyle c\!} , in order to securely send the message to Bob, as follows: c = E k ( m ) . {\displaystyle c=E_{k}(m).\!} In a symmetric-key system, Bob knows Alice's encryption key. Once the message is encrypted, Alice can safely transmit it to Bob (assuming no one else knows the key). In order to read Alice's message, Bob must decrypt the ciphertext using E k − 1 {\displaystyle {E_{k}}^{-1}\!} which is known as the decryption cipher, D k : {\displaystyle D_{k}:\!} D k ( c ) = D k ( E k ( m ) ) = m . {\displaystyle D_{k}(c)=D_{k}(E_{k}(m))=m.\!} Alternatively, in a non-symmetric key system, everyone, not just Alice and Bob, knows the encryption key; but the decryption key cannot be inferred from the encryption key. Only Bob knows the decryption key D k , {\displaystyle D_{k},} and decryption proceeds as D k ( c ) = m . {\displaystyle D_{k}(c)=m.} == Types of ciphers == The history of cryptography began thousands of years ago. Cryptography uses a variety of different types of encryption. Earlier algorithms were performed by hand and are substantially different from modern algorithms, which are generally executed by a machine. === Historical ciphers === Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include: Substitution cipher: the units of plaintext are replaced with ciphertext (e.g., Caesar cipher and one-time pad) Polyalphabetic substitution cipher: a substitution cipher using multiple substitution alphabets (e.g., Vigenère cipher and Enigma machine) Polygraphic substitution cipher: the unit of substitution is a sequence of two or more letters rather than just one (e.g., Playfair cipher) Transposition cipher: the ciphertext is a permutation of the plaintext (e.g., rail fence cipher) Historical ciphers are not generally used as a standalone encryption technique because they are quite easy to crack. Many of the classical ciphers, with the exception of the one-time pad, can be cracked using brute force. === Modern ciphers === Modern ciphers are more secure than classical ciphers and are designed to withstand a wide range of attacks. An attacker should not be able to find the key used in a modern cipher, even if they know any specifics about the plaintext and its corresponding ciphertext. Modern encryption methods can be divided into the following categories: Private-key cryptography (symmetric key algorithm): one shared key is used for encryption and decryption Public-key cryptography (asymmetric key algorithm): two different keys are used for encryption and decryption In a symmetric key algorithm (e.g., DES, AES), the sender and receiver have a shared key established in advance: the sender uses the shared key to perform encryption; the receiver uses the shared key to perform decryption. Symmetric key algorithms can either be block ciphers or stream ciphers. Block ciphers operate on fixed-length groups of bits, called blocks, with an unvarying transformation. Stream ciphers encrypt plaintext digits one at a time on a continuous stream of data, with the transformation of successive digits varying during the encryption process. In an asymmetric key algorithm (e.g., RSA), there are two different keys: a public key and a private key. The public key is published, thereby allowing any sender to perform encryption. The private key is kept secret by the receiver, thereby allowing only the receiver to correctly perform decryption. == Cryptanalysis == Cryptanalysis (also referred to as codebreaking or cracking the code) is the study of applying various methodologies to obtain the meaning of encrypted information, without having access to the cipher required to correctly decrypt the information. This typically involves gaining an understanding of the system design and determining the cipher. Cryptanalysts can follow one or more attack models to crack a cipher, depending upon what information is available and the type of cipher being analyzed. Ciphertext is generally the most easily obtained part of a cryptosystem and therefore is an important part of cryptanalysis. === Attack models === Ciphertext-only: the cryptanalyst has access only to a collection of ciphertexts or code texts. This is the weakest attack model because the cryptanalyst has limited information. Modern ciphers rarely fail under this attack. Known-plaintext: the attacker has a set of ciphertexts to which they know the corresponding plaintext Chosen-plaintext attack: the attacker can obtain the ciphertexts corresponding to an arbitrary set of plaintexts of their own choosing Batch chosen-plaintext attack: where the cryptanalyst chooses all plaintexts before any of them are encrypted. This is often the meaning of an unqualified use of "chosen-plaintext attack". Adaptive chosen-plaintext attack: where the cryptanalyst makes a series of interactive queries, choosing subsequent plaintexts based on the information from the previous encryptions. Chosen-ciphertext attack: the attacker can obtain the plaintexts corresponding to an arbitrary set of ciphertexts of their own choosing Adaptive chosen-ciphertext attack Indifferent chosen-ciphertext attack Related-key attack: similar to a chosen-plaintext attack, except the attacker can obtain ciphertexts encrypted under two different keys. The keys are unknown, but the relationship between them is known (e.g., two keys that differ in the one bit). == Famous ciphertexts == The Babington Plot ciphers The Shugborough inscription The Zimmermann Telegram The Magic Words are Squeamish Ossifrage The cryptogram in "The Gold-Bug" Beale ciphers Kryptos Zodiac Killer ciphers

  Read more →
• 

  What I eat in a day video

  "What I eat in a day" videos are a trend on several social media platforms where a person describes all the meals and snacks that they eat during a given day, often as part of a given diet. The videos, shared on platforms including Twitter, TikTok and YouTube, become increasingly popular in 2020, with some of them accumulating millions of views, and they are considered a profitable industry for the people making them. Some have raised concerns that the videos may promote an unrealistic standard for healthy eating and contribute to the development of eating disorders. == Format == These videos often feature a montage of the food that the creator eats over the course of the day, sometimes with the associated calorie count of the foods that they describe. Unlike related mukbang videos, however, in which participants eat large amounts of food, the diets described are often restrictive. However, other videos are labeled as "unhealthy" and depict large portion sizes and higher amounts of processed food. == Popularity == "What I eat in a day" videos have existed for a long time, especially on YouTube, but they have become much more widespread in recent years. This phenomenon is self-reinforcing because when social media users watch or like these videos they are likely to see more of them in the future. Indeed, some of the most successful videos have tens of millions of view each. == Criticism and controversy == Several dieticians and mental health professionals over the impacts that these videos can have, as they can advocate a restrictive style of eating and not "promote body diversity." They have also raised concerns that this trend could contribute to a rise in disordered eating, especially since use of social media is known to increase feelings of negative body image. This trend is particularly prevalent among young adults, which are also the group with the highest vulnerability to eating disorders. More recently, a portion of these videos have begun to challenge diets and depict more realistic ways of eating in order to reduce the potential consequences of the trend.

  Read more →
• 

  Artificial psychology

  Artificial psychology (AP) has had multiple meanings dating back to 19th century, with recent usage related to artificial intelligence (AI).Artificial psychology is a theoretical field related to artificial intelligence, cognitive science, and psychology, which explores how advanced AI systems may develop human-like decision-making processes. In 1999, Zhiliang Wang and Lun Xie presented a theory of artificial psychology based on artificial intelligence. They analyze human psychology using information science research methods and artificial intelligence research to probe deeper into the human mind. == Main Theory == Dan Curtis (b. 1963) proposed AP is a theoretical discipline. The theory considers the situation when an artificial intelligence approaches the level of complexity where the intelligence meets two conditions: Condition I A: Makes all of its decisions autonomously B: Is capable of making decisions based on information that is New Abstract Incomplete C: The artificial intelligence is capable of reprogramming itself based on the new data, allowing it to evolve. D: And is capable of resolving its own programming conflicts, even in the presence of incomplete data. This means that the intelligence autonomously makes value-based decisions, referring to values that the intelligence has created for itself. Condition II All four criteria are met in situations that are not part of the original operating program When both conditions are met, then, according to this theory, the possibility exists that the intelligence will reach irrational conclusions based on real or created information. At this point, the criteria are met for intervention which will not necessarily be resolved by simple re-coding of processes due to extraordinarily complex nature of the codebase itself; but rather a discussion with the intelligence in a format which more closely resembles classical (human) psychology. If the intelligence cannot be reprogrammed by directly inputting new code, but requires the intelligence to reprogram itself through a process of analysis and decision based on information provided by a human, in order for it to overcome behavior which is inconsistent with the machines purpose or ability to function normally, then artificial psychology is by definition, what is required. The level of complexity that is required before these thresholds are met is currently a subject of extensive debate. The theory of artificial psychology does not address the specifics of what those levels may be, but only that the level is sufficiently complex that the intelligence cannot simply be recoded by a software developer, and therefore dysfunctionality must be addressed through the same processes that humans must go through to address their own dysfunctionalities. Along the same lines, artificial psychology does not address the question of whether or not the intelligence is conscious. As of 2022, the level of artificial intelligence does not approach any threshold where any of the theories or principles of artificial psychology can even be tested, and therefore, artificial psychology remains a largely theoretical discipline. Even at a theoretical level, artificial psychology remains an advanced stage of artificial intelligence.

  Read more →
• 

  Code (cryptography)

  In cryptology, a code is a method used to encrypt a message that operates at the level of meaning; that is, words or phrases are converted into something else. A code might transform "change" into "CVGDK" or "cocktail lounge". The U.S. National Security Agency defined a code as "A substitution cryptosystem in which the plaintext elements are primarily words, phrases, or sentences, and the code equivalents (called "code groups") typically consist of letters or digits (or both) in otherwise meaningless combinations of identical length." A codebook is needed to encrypt, and decrypt the phrases or words. By contrast, ciphers encrypt messages at the level of individual letters, or small groups of letters, or even, in modern ciphers, individual bits. Messages can be transformed first by a code, and then by a cipher. Such multiple encryption, or "superencryption" aims to make cryptanalysis more difficult. Another comparison between codes and ciphers is that a code typically represents a letter or groups of letters directly without the use of mathematics. As such the numbers are configured to represent these three values: 1001 = A, 1002 = B, 1003 = C, ... . The resulting message, then would be 1001 1002 1003 to communicate ABC. Ciphers, however, utilize a mathematical formula to represent letters or groups of letters. For example, A = 1, B = 2, C = 3, ... . Thus the message ABC results by multiplying each letter's value by 13. The message ABC, then would be 13 26 39. Codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing the cumbersome codebooks, so ciphers are now the dominant technique in modern cryptography. In contrast, because codes are representational, they are not susceptible to mathematical analysis of the individual codebook elements. In the example, the message 13 26 39 can be cracked by dividing each number by 13 and then ranking them alphabetically. However, the focus of codebook cryptanalysis is the comparative frequency of the individual code elements matching the same frequency of letters within the plaintext messages using frequency analysis. In the above example, the code group, 1001, 1002, 1003, might occur more than once and that frequency might match the number of times that ABC occurs in plain text messages. (In the past, or in non-technical contexts, code and cipher are often used to refer to any form of encryption). == One- and two-part codes == Codes are defined by "codebooks" (physical or notional), which are dictionaries of codegroups listed with their corresponding plaintext. Codes originally had the codegroups assigned in 'plaintext order' for convenience of the code designed, or the encoder. For example, in a code using numeric code groups, a plaintext word starting with "a" would have a low-value group, while one starting with "z" would have a high-value group. The same codebook could be used to "encode" a plaintext message into a coded message or "codetext", and "decode" a codetext back into plaintext message. In order to make life more difficult for codebreakers, codemakers designed codes with no predictable relationship between the codegroups and the ordering of the matching plaintext. In practice, this meant that two codebooks were now required, one to find codegroups for encoding, the other to look up codegroups to find plaintext for decoding. Such "two-part" codes required more effort to develop, and twice as much effort to distribute (and discard safely when replaced), but they were harder to break. The Zimmermann Telegram in January 1917 used the German diplomatic "0075" two-part code system which contained upwards of 10,000 phrases and individual words. == One-time code == A one-time code is a prearranged word, phrase or symbol that is intended to be used only once to convey a simple message, often the signal to execute or abort some plan or confirm that it has succeeded or failed. One-time codes are often designed to be included in what would appear to be an innocent conversation. Done properly they are almost impossible to detect, though a trained analyst monitoring the communications of someone who has already aroused suspicion might be able to recognize a comment like "Aunt Bertha has gone into labor" as having an ominous meaning. Famous example of one time codes include: In the Bible, Jonathan prearranges a code with David, who is going into hiding from Jonathan's father, King Saul. If, during archery practice, Jonathan tells the servant retrieving arrows "the arrows are on this side of you," David may safely return to court; if the command is "the arrows are beyond you," David must flee. "One if by land; two if by sea" in "Paul Revere's Ride" made famous in the poem by Henry Wadsworth Longfellow "Climb Mount Niitaka" - the signal to Japanese planes to begin the attack on Pearl Harbor During World War II the British Broadcasting Corporation's overseas service frequently included "personal messages" as part of its regular broadcast schedule. The seemingly nonsensical stream of messages read out by announcers were actually one time codes intended for Special Operations Executive (SOE) agents operating behind enemy lines. An example might be "The princess wears red shoes" or "Mimi's cat is asleep under the table". Each code message was read out twice. By such means, the French Resistance were instructed to start sabotaging rail and other transport links the night before D-day. "Over all of Spain, the sky is clear" was a signal (broadcast on radio) to start the nationalist military revolt in Spain on July 17, 1936. Sometimes messages are not prearranged and rely on shared knowledge hopefully known only to the recipients. An example is the telegram sent to U.S. President Harry Truman, then at the Potsdam Conference to meet with Soviet premier Joseph Stalin, informing Truman of the first successful test of an atomic bomb. "Operated on this morning. Diagnosis not yet complete but results seem satisfactory and already exceed expectations. Local press release necessary as interest extends great distance. Dr. Groves pleased. He returns tomorrow. I will keep you posted." == Idiot code == An idiot code is a code that is created by the parties using it. This type of communication is akin to the hand signals used by armies in the field. Example: Any sentence where 'day' and 'night' are used means 'attack'. The location mentioned in the following sentence specifies the location to be attacked. Plaintext: Attack X. Codetext: We walked day and night through the streets but couldn't find it! Tomorrow we'll head into X. An early use of the term appears to be by George Perrault, a character in the science fiction book Friday by Robert A. Heinlein: The simplest sort [of code] and thereby impossible to break. The first ad told the person or persons concerned to carry out number seven or expect number seven or it said something about something designated as seven. This one says the same with respect to code item number ten. But the meaning of the numbers cannot be deduced through statistical analysis because the code can be changed long before a useful statistical universe can be reached. It's an idiot code... and an idiot code can never be broken if the user has the good sense not to go too often to the well. Terrorism expert Magnus Ranstorp said that the men who carried out the September 11 attacks on the United States used basic e-mail and what he calls "idiot code" to discuss their plans. == Cryptanalysis of codes == While solving a monoalphabetic substitution cipher is easy, solving even a simple code is difficult. Decrypting a coded message is a little like trying to translate a document written in a foreign language, with the task basically amounting to building up a "dictionary" of the codegroups and the plaintext words they represent. One fingerhold on a simple code is the fact that some words are more common than others, such as "the" or "a" in English. In telegraphic messages, the codegroup for "STOP" (i.e., end of sentence or paragraph) is usually very common. This helps define the structure of the message in terms of sentences, if not their meaning, and this is cryptanalytically useful. Further progress can be made against a code by collecting many codetexts encrypted with the same code and then using information from other sources spies newspapers diplomatic cocktail party chat the location from where a message was sent where it was being sent to (i.e., traffic analysis) the time the message was sent, events occurring before and after the message was sent the normal habits of the people sending the coded messages etc. For example, a particular codegroup found almost exclusively in messages from a particular army and nowhere else might very well indicate the commander of that army. A codegroup that appears in messages preceding an attack on a particular location may very well stand for that location. Cribs can be an immediate giveaway to the definiti

  Read more →
• 

  Hyper-encryption

  Hyper-encryption is a form of encryption invented by Michael O. Rabin which uses a high-bandwidth source of public random bits, together with a secret key that is shared by only the sender and recipient(s) of the message. It uses the assumptions of Ueli Maurer's bounded-storage model as the basis of its secrecy. Although everyone can see the data, decryption by adversaries without the secret key is still not feasible, because of the space limitations of storing enough data to mount an attack against the system. Unlike almost all other cryptosystems except the one-time pad, hyper-encryption can be proved to be information-theoretically secure, provided the storage bound cannot be surpassed. Moreover, if the necessary public information cannot be stored at the time of transmission, the plaintext can be shown to be impossible to recover, regardless of the computational capacity available to an adversary in the future, even if they have access to the secret key at that future time. A highly energy-efficient implementation of a hyper-encryption chip was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be ~205 times more efficient in terms of Energy-Performance-Product.

  Read more →
• 

  Control-flow diagram

  A control-flow diagram (CFD) is a diagram to describe the control flow of a business process, process or review. Control-flow diagrams were developed in the 1950s, and are widely used in multiple engineering disciplines. They are one of the classic business process modeling methodologies, along with flow charts, drakon-charts, data flow diagrams, functional flow block diagram, Gantt charts, PERT diagrams, and IDEF. == Overview == A control-flow diagram can consist of a subdivision to show sequential steps, with if-then-else conditions, repetition, and/or case conditions. Suitably annotated geometrical figures are used to represent operations, data, or equipment, and arrows are used to indicate the sequential flow from one to another. There are several types of control-flow diagrams, for example: Change-control-flow diagram, used in project management Configuration-decision control-flow diagram, used in configuration management Process-control-flow diagram, used in process management Quality-control-flow diagram, used in quality control. In software and systems development, control-flow diagrams can be used in control-flow analysis, data-flow analysis, algorithm analysis, and simulation. Control and data are most applicable for real time and data-driven systems. These flow analyses transform logic and data requirements text into graphic flows which are easier to analyze than the text. PERT, state transition, and transaction diagrams are examples of control-flow diagrams. == Types of control-flow diagrams == === Process-control-flow diagram === A flow diagram can be developed for the process [control system] for each critical activity. Process control is normally a closed cycle in which a sensor. The application determines if the sensor information is within the predetermined (or calculated) data parameters and constraints. The results of this comparison, which controls the critical component. This [feedback] may control the component electronically or may indicate the need for a manual action. This closed-cycle process has many checks and balances to ensure that it stays safe. It may be fully computer controlled and automated, or it may be a hybrid in which only the sensor is automated and the action requires manual intervention. Further, some process control systems may use prior generations of hardware and software, while others are state of the art. === Performance-seeking control-flow diagram === The figure presents an example of a performance-seeking control-flow diagram of the algorithm. The control law consists of estimation, modeling, and optimization processes. In the Kalman filter estimator, the inputs, outputs, and residuals were recorded. At the compact propulsion-system-modeling stage, all the estimated inlet and engine parameters were recorded. In addition to temperatures, pressures, and control positions, such estimated parameters as stall margins, thrust, and drag components were recorded. In the optimization phase, the operating-condition constraints, optimal solution, and linear-programming health-status condition codes were recorded. Finally, the actual commands that were sent to the engine through the DEEC were recorded.

  Read more →
• 

  Message queuing service

  A message queueing service is a message-oriented middleware or MOM deployed in a compute cloud using software as a service model. Service subscribers access queues and or topics to exchange data using point-to-point or publish and subscribe patterns. It's important to differentiate between event-driven and message-driven (aka queue driven) services: Event-driven services (e.g. AWS SNS) are decoupled from their consumers. Whereas queue / message driven services (e.g. AWS SQS) are coupled with their consumers. Message queues can be a good buffer to handle spiky workloads but they have a finite capacity. According to Gregor Hohpe, message queues require proper mechanisms (aka flow controls) to avoid filling the queue beyond its manageable capacity and to keep the system stable. == Ordering Guarantees in Message Queues == Amazon SQS FIFO and Azure Service Bus sessions are queue-based messaging systems that provide ordering guarantees within a message group or session attempt but do not necessarily guarantee ordered delivery in cases of retries or failures. In SQS FIFO, messages in the same message group are processed in order, with subsequent messages held until the preceding message is successfully processed or moved to the dead-letter queue (DLQ). Once a message is placed in the DLQ, it is no longer retried, creating a gap in the sequence. However, the remaining messages continue to be delivered in order. Azure Service Bus sessions function similarly by maintaining ordering within a session, provided a single consumer processes messages sequentially. The implementation differs from SQS FIFO but follows the same fundamental ordering principle. In contrast, Apache Kafka is a distributed log-based messaging system that guarantees ordering within individual partitions rather than across the entire topic. Unlike queue-based systems, Kafka retains messages in a durable, append-only log, allowing multiple consumers to read at different offsets. Kafka uses manual offset management, giving consumers control over retries and failure handling. If a consumer fails to process a message, it can delay committing the offset, preventing further progress in that partition while other partitions remain unaffected. This partition-based design enables fault isolation and parallel processing while allowing ordering to be maintained within partitions, depending on consumer handling. == Vendors == Apache Kafka Apache Kafka is a distributed system consisting of servers that store and forward messages between producer client and consumer applications. IBM MQ IBM MQ offers a managed service that can be used on IBM Cloud and Amazon Web Services. Microsoft Azure Service Bus Service Bus offers queues, topics & subscriptions, and rules/actions in order to support publish-subscribe, temporal decoupling, and load balancing scenarios. Azure Service Bus is built on AMQP allowing any existing AMQP 1.0 client stack to interact with Service Bus directly or via existing .Net, Java, Node, and Python clients. Standard and Premium tiers allow for pay as you go or isolated resources at massive scale. Oracle Messaging Cloud Service This service provides a messaging solution for applications for asynchronous communication and is influenced by the Java Message Service (JMS) API specification. Any application platform that understands HTTP can also use Oracle Messaging Cloud Service through the REST interface. For Java applications, Oracle Messaging Cloud Service provides a Java library that implements and extends the JMS 1.1 interface. The Java library implements the JMS API by acting as a client of the REST API. Amazon Simple Queue Service Supports messages natively up to 256K, or up to 2GB by transmitting payload via S3. Highly scalable, durable and resilient. Provides loose-FIFO and 'at least once' delivery in order to provide massive scale. Supports REST API and optional Java Message Service client. Low latency. Utilizes Amazon Web Services. IronMQ Supports messages up to 64k; guarantees order; guarantees once only delivery; no delays retrieving messages. Supports REST API and beanstalkd open source protocol. Runs on multiple clouds including AWS and Rackspace. Scaling must be managed by user. RabbitMQ RabbitMQ is a reliable and mature messaging and streaming broker, which is easy to deploy on cloud environments, on-premises, and on your local machine. Supports AMQP, STOMP, MQTT StormMQ Open platform supports messages up to 50Mb. Uses AMQP to avoid vendor lock-in and provide language neutrality. Locate-It Option allows customers to audit the location of their data at all times and satisfy data protection principles. AnypointMQ An enterprise multi-tenant, cloud messaging service that performs advanced asynchronous messaging scenarios between applications. Anypoint MQ is fully integrated with Anypoint Platform, offering role based access control, client application management, and connectors.

  Read more →
• 

  Computer network engineering

  Computer network engineering is a technology discipline within engineering that deals with the design, implementation, and management of computer networks. These systems contain both physical components, such as routers, switches, cables, and some logical elements, such as protocols and network services. Computer network engineers attempt to ensure that the data is transmitted efficiently, securely, and reliably over both local area networks (LANs) and wide area networks (WANs), as well as across the Internet. Computer networks often play a large role in modern industries ranging from telecommunications to cloud computing, enabling processes such as email and file sharing, as well as complex real-time services like video conferencing and online gaming. == Background == The evolution of network engineering is marked by significant milestones that have greatly impacted communication methods. These milestones particularly highlight the progress made in developing communication protocols that are vital to contemporary networking. This discipline originated in the 1960s with projects like ARPANET, which initiated important advancements in reliable data transmission. The advent of protocols such as TCP/IP revolutionized networking by enabling interoperability among various systems, which, in turn, fueled the rapid growth of the Internet. Key developments include the standardization of protocols and the shift towards increasingly complex layered architectures. These advancements have profoundly changed the way devices interact across global networks. == Network infrastructure design == The foundation of computer network engineering lies in the design of the network infrastructure. This involves planning both the physical layout of the network and its logical topology to ensure optimal data flow, reliability, and scalability. === Physical infrastructure === The physical infrastructure consists of the hardware used to transmit data, which is represented by the first layer of the OSI model. ==== Cabling ==== Copper cables such as ethernet over twisted pair are commonly used for short-distance connections, especially in local area networks (LANs), while fiber optic cables are favored for long-distance communication due to their high-speed transmission capabilities and lower susceptibility to interference. Fiber optics play a significant role in the backbone of large-scale networks, such as those used in data centers and internet service provider (ISP) infrastructures. ==== Wireless networks ==== In addition to wired connections, wireless networks have become a common component of physical infrastructure. These networks facilitate communication between devices without the need for physical cables, providing flexibility and mobility. Wireless technologies use a range of transmission methods, including radio frequency (RF) waves, infrared signals, and laser-based communication, allowing devices to connect to the network. Wi-Fi based on IEEE 802.11 standards is the most widely used wireless technology in local area networks and relies on RF waves to transmit data between devices and access points. Wireless networks operate across various frequency bands, including 2.4 GHz and 5 GHz, each offering unique ranges and data rates; the 2.4 GHz band provides broader coverage, while the 5 GHz band supports faster data rates with reduced interference, ideal for densely populated environments. Beyond Wi-Fi, other wireless transmission methods, such as infrared and laser-based communication, are used in specific contexts, like short-range, line-of-sight links or secure point-to-point communication. In mobile networks, cellular technologies like 3G, 4G, and 5G enable wide-area wireless connectivity. 3G introduced faster data rates for mobile browsing, while 4G significantly improved speed and capacity, supporting advanced applications like video streaming. The latest evolution, 5G, operates across a range of frequencies, including millimeter-wave bands, and provides high data rates, low latency, and support for more device connectivity, useful for applications like the Internet of Things (IoT) and autonomous systems. Together, these wireless technologies allow networks to meet a variety of connectivity needs across local and wide areas. ==== Network devices ==== Routers and switches help direct data traffic and assist in maintaining network security; network engineers configure these devices to optimize traffic flow and prevent network congestion. In wireless networks, wireless access points (WAP) allow devices to connect to the network. To expand coverage, multiple access points can be placed to create a wireless infrastructure. Beyond Wi-Fi, cellular network components like base stations and repeaters support connectivity in wide-area networks, while network controllers and firewalls manage traffic and enforce security policies. Together, these devices enable a secure, flexible, and scalable network architecture suitable for both local and wide-area coverage. === Logical topology === Beyond the physical infrastructure, a network must be organized logically, which defines how data is routed between devices. Various topologies, such as star, mesh, and hierarchical designs, are employed depending on the network’s requirements. In a star topology, for example, all devices are connected to a central hub that directs traffic. This configuration is relatively easy to manage and troubleshoot but can create a single point of failure. In contrast, a mesh topology, where each device is interconnected with several others, offers high redundancy and reliability but requires a more complex design and larger hardware investment. Large networks, especially those in enterprises, often employ a hierarchical model, dividing the network into core, distribution, and access layers to enhance scalability and performance. == Network protocols and communication standards == Communication protocols dictate how data in a network is transmitted, routed, and delivered. Depending on the goals of the specific network, protocols are selected to ensure that the network functions efficiently and securely. The Transmission Control Protocol/Internet Protocol (TCP/IP) suite is fundamental to modern computer networks, including the Internet. It defines how data is divided into packets, addressed, routed, and reassembled. The Internet Protocol (IP) is critical for routing packets between different networks. In addition to traditional protocols, advanced protocols such as Multiprotocol Label Switching (MPLS) and Segment Routing (SR) enhance traffic management and routing efficiency. For intra-domain routing, protocols like Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP) provide dynamic routing capabilities. On the local area network (LAN) level, protocols like Virtual Extensible LAN (VXLAN) and Network Virtualization using Generic Routing Encapsulation (NVGRE) facilitate the creation of virtual networks. Furthermore, Internet Protocol Security (IPsec) and Transport Layer Security (TLS) secure communication channels, ensuring data integrity and confidentiality. For real-time applications, protocols such as Real-time Transport Protocol (RTP) and WebRTC provide low-latency communication, making them suitable for video conferencing and streaming services. Additionally, protocols like QUIC enhance web performance and security by establishing secure connections with reduced latency. == Network security == As networks have become essential for business operations and personal communication, the demand for robust security measures has increased. Network security is a critical component of computer network engineering, concentrating on the protection of networks against unauthorized access, data breaches, and various cyber threats. Engineers are responsible for designing and implementing security measures that ensure the integrity and confidentiality of data transmitted across networks. Firewalls serve as barriers between trusted internal networks and external environments, such as the Internet. Network engineers configure firewalls, including next-generation firewalls (NGFW), which incorporate advanced features such as deep packet inspection and application awareness, thereby enabling more refined control over network traffic and protection against sophisticated attacks. In addition to firewalls, engineers use encryption protocols, including Internet Protocol Security (IPsec) and Transport Layer Security (TLS), to secure data in transit. These protocols provide a means of safeguarding sensitive information from interception and tampering. For secure remote access, Virtual Private Networks (VPNs) are deployed, using technologies to create encrypted tunnels for data transmission over public networks. These VPNs are often used for maintaining security when remote users access corporate networks but are also used ion other settings. To enhance threat detection and r

  Read more →
• 

  SIGINT Activity Designator

  A SIGINT Activity Designator (or SIGAD) identifies a signals intelligence (SIGINT) line of collection activity associated with a signals collection station, such as a base or a ship. For example, the SIGAD for Menwith Hill in the UK is USD1000. SIGADs are used by the signals intelligence agencies of Australia, Canada, New Zealand, the United Kingdom, and the United States (the Five Eyes). There are several thousand SIGADs including the substation SIGADs denoted with a trailing alpha character. Several dozen of these are significant. The leaked Boundless Informant reporting screenshot showed that it summarized 504 active SIGADs during a 30-day period in March 2013. == General format == A SIGAD consists of five to eight case insensitive alphanumeric characters. It takes the general form of an alphanumeric designator normally composed of a two- or three-letter prefix followed by one to three numbers. Often a dash is used to separate the alphabetic and numeric characters in the primary part of the designator, but less frequently a space is used as a separator or the alphabetic and numeric characters are concatenated together. An additional alphabetic character can be added to denote a sub-designator for a subset of the primary unit, such as a detachment. Lastly, a numeric character can be added after the aforementioned alphabetic to provide for a sub-sub-designator. In the examples below an X represents an alphabetic character and an N represents a numeric character that are part of the primary designator. Likewise, an x represents an alphabetic character and an n represents a numeric character that are part of a sub-designator. Here are valid generalized examples of SIGADs: The first two characters show which country operates the particular SIGINT facility, which can be US for the United States, UK for the United Kingdom, CA for Canada, AU for Australia and NZ for New Zealand. A third letter shows what sort of staff runs the station. SIGADs beginning with US without a third letter are used for intercept facilities run by the NSA. == PRISM SIGAD == One prominent SIGAD as of April 2013 is US-984XN, with an unclassified codename of PRISM. It is "the number one source of raw intelligence used for NSA analytic reports" according to National Security Agency sources in a document leaked by Edward Snowden. The President's Daily Brief, an all-source intelligence product, cited SIGAD US-984XN as a source in 1,477 items in 2012. The U.S. government operates the PRISM electronic surveillance collection program through NSA's Special Source Operations, an alliance with trusted telecommunications providers. == SIGADs for spy ships == The declassified SIGAD for the USS Liberty (AGTR-5) was USN-855. The USS Liberty incident occurred on 8 June 1967, during the Six-Day War, when Israeli Air Force jet fighter aircraft and Israeli Navy motor torpedo boats attacked the USS Liberty in international waters. The USS Pueblo (AGER-2) was a technical research ship, which was boarded and captured by North Korean forces on 23 January 1968, in what is known as the Pueblo incident. The declassified SIGAD for the NSA Direct Support Unit (DSU) from the Naval Security Group (NSG) on the USS Pueblo patrol involved in the incident was USN-467Y. The USS Pueblo, which officially remains a commissioned vessel of the United States Navy, is the only ship of the U.S. Navy currently being held captive. == Vietnam War SIGADs == The following are the Vietnam War-era declassified SIGADs from inside South Vietnam during the period of 1969 to 1975: Some locations have multiple SIGADs due to different types of collection activities and/or collection at different times during the period. The SIGADs beginning with USA were operated by the United States Air Force's United States Air Force Security Service (USAFSS). The SIGADs beginning with USM were operated by the United States Army's Army Security Agency (ASA). Lastly, the SIGADs beginning with USN were operated by the United States Navy's Naval Security Group (NAVSECGRU). All three of these units have been merged into other units or inactivated. The above list consists of the higher-echelon SIGADs. It does not include the numerous miscellaneous and temporary detachments, or direction finding stations belonging to major units or sites unless that detachment or site was the only one stationed in South Vietnam. Many of the "dets" were short-lived, often formed to support ongoing MACV operations or forward deployments of combat operational or maneuver units. These detachments usually were designated by a letter suffix attached to the higher-echelon SIGAD such as "USM-633J," which was a detachment of the 372d Radio Research Company, USM-633, supporting the United States Army's 25th Infantry Division. === Supporting Southeast Asia SIGADs === The following declassified SIGADs were highly relevant to the Vietnam Campaign, but were located in areas outside of South Vietnam in Southeast Asia. Again, detachments are not listed separately. In the case of the USS Maddox, naval Direct Support Units (DSUs) used the SIGAD USN-467 as a generic designator for their missions. Each specific patrol received a letter suffix for its duration. The subsequent mission would receive the next letter in an alphabetic sequence. Thus, SIGAD USN-467N specifically designates the USS Maddox patrol involved with the Gulf of Tonkin incident. == Joint Base SIGADs == In November 2005, the US Congress performed a fifth round of Base Realignment and Closure. This 2005 law also created twelve joint bases by merging adjacent installations belonging to different services in an effort to reduce costs and improve efficiencies. Joint bases with a primarily SIGINT mission have SIGADs that begin with USJ. A joint base would have a primary SIGAD in the general form of USJ-NNN, where NNN are numeric characters. An actual example is not given, since these units are currently active.

  Read more →
• 

  IBM remote batch terminals

  The IBM 2780 and the IBM 3780 are devices developed by IBM for performing remote job entry (RJE) and other batch functions over telephone lines; they communicate with the mainframe via Binary Synchronous Communications (BSC or Bisync) and replaced older terminals using synchronous transmit-receive (STR). In addition, IBM has developed workstation programs for the 1130, 360/20, 2922, System/360 other than 360/20, System/370 and System/3. == 2780 Data Transmission Terminal == The 2780 Data Transmission Terminal first shipped in 1967. It consists of: A line printer similar to the IBM 1443 that can print up to 240 lines per minute (lpm), or 300 lpm using an extremely restricted character set. A card reader/punch unit, similar to an IBM 1442, that can read up to 400 cards per minute (cpm) and can punch up to 355 cpm. A line buffer that stores data received or to be transmitted over the communications line. A binary synchronous adapter which controls the flow of data over the communications line. The 2780 is capable of local (offline) card to print operation. It comes in four models: Model 1: Can read punched cards and transmit the data to a remote host computer, and can receive and print data sent by the host. Model 2: Same as Model 1 but adds the ability to punch card data received from the host. Model 3: Can only print data received from the host, but not send data to it. Model 4: Can read and punch card data, but has no printing capabilities. The 2780 uses a dedicated communication line at speeds of 1200, 2000, 2400 or 4800 bits per second. It is a half duplex device, although full duplex lines can be used with some increase in throughput. It can communicate in Transcode (a 6-bit code), 8-bit EBCDIC, or 7-bit ASCII. == 2770 Data Communication System == The 2770, announced in 1969, "was said to surpass all other IBM terminals in the variety of available input-output devices." The 2770 was developed by the IBM General Products Division (GPD) in Rochester, MN. It comes standard with a desktop terminal with keyboard. The printer and other devices (any two in any combination) can be attached to the 2772 Multi-Purpose Control unit. Possible devices include: 50 Magnetic Data Inscriber 545 Card Punch Model 3 (non-printing) or Model 4 (printing) 1017 Paper Tape Reader 1018 Paper Tape Punch 1053 Printer Model 1 1255 Magnetic Character Reader Models 1, 2 or 3 2203 Printer Model A1 or A2 2213 Printer Model 1 or 2 2265 Display Station Model 2 2502 Card Reader Model A1 or A2 5496 Data Recorder == 3780 Data Communications Terminal == In May 1972, IBM announced the IBM 3780, an enhanced version of the 2780. The 3780 was developed by IBM's Data Processing Division (DPD). There is one model, with an optional card punch. The 3780 drops Transcode support and incorporates several performance enhancements. It supports compression of blank fields in data using run-length encoding. It provides the ability to interleave data between devices, introduces double buffering, and adds support for the Wait-before-transmit ACKnowledgement (WACK) and Temporary Text Delay (TTD) Binary Synchronous control characters. The integrated punched card unit can read cards at 600 cards per minute. The integrated printer is rated at 300, 350 or 425 lines per minute based on characters set (63, 52 or 39 characters). The 3781 Card Punch is an optional feature. It punches 160 columns per second, or 91 cards per minute if all 80 columns are punched. The IBM 2780 and 3780 were later emulated on various types of equipment, including eventually the personal computer. A notable early emulation was the DN60, by Digital Equipment Corporation in the late 1970s. == 3770 Data Communications System == In 1974 IBM Data Processing Division (DPD) offered a successor to the 3780, called the 3770 Data Communications System, supporting SDLC, BSC, BSC Multi-leaving and SNA, depending on the configuration. The 3770 is a family of desk console style terminals that offers a variety of keyboard and printer combinations as well as I/O equipment attachment and communications features. The terminals come built into a desk and include the following models: 3771 Communication Terminal (optional card reader, optional card punch, wire matrix printer) Models 1 (40 cps printer), 2 (80 cps printer), and 3 (120 cps printer). 3773 Communication Terminal (diskette, wire matrix printer) Models 1 (40 cps printer), 2 (80 cps printer), and 3 (120 cps printer). Each model has a P version which adds some programming features. 3774 Communication Terminal (optional card reader, optional card punch, optional belt printer, wire matrix printer) Models 1 (80 cps printer), and 2 (120 cps printer). Each model has a P version which adds some programming features, a 480-character display and a non-removable diskette. 3775 Communication Terminal (optional card reader, optional card punch, optional diskette, belt printer) Model 1 (120 lpm printer). The model P1 adds some programming features, a 480-character display and a non-removable diskette. 3776 Communication Terminal (optional card reader, optional card punch, optional diskette, belt printer) Models 1 (300 lpm printer) and 2 (400 lpm printer). Models 3 and 4 are similar to models 1 and 2. 3777 Communication Terminal (optional card reader, optional diskette, train printer) Model 1 (up to 1000 lpm printer depending on character set). Model 2 adds an optional card punch, model 3 adds an optional magnetic tape drive and model 4 replaces the train printer with a slower model called the IBM 3262. The model 4 also allows a second, optional, 3262. The following I/O devices can be attached to a 3770 terminal: IBM 2502 Card Reader: Models A1 (up to 150 card per minute), A2 (up to 300 cards per minute) or A3 (up to 400 cards per minute) IBM 3203 Printer Model 3: 1000 LPM using 48 character set IBM 3501 Card Reader: Up to 50 cards per minute desktop unit IBM 3521 Card Punch: Up to 50 cards per minute IBM 3782 Card Attachment unit, which allows the 2502 or 3521 to be attached to any terminal except the 3777 IBM 3784 Line Printer, can be attached to a 3774 as a second printer. Up to 155 LPM with 48 characters set print belt. == Workstation programs == IBM distributes workstation programs with systems software including OS/360 Attached Support Processor (ASP) Houston Automatic Spooling Priority (HASP and HASP II) Operating System/Virtual Storage 1 (OS/VS1) Operating System/Virtual Storage 2 (OS/VS2 MVS) Release 2 through 3.8 MVS versions from MVS/SP Version 1 through z/OS Priority Output Writers, Execution processors and input Readers (POWER) Remote Spooling Communications Subsystem (RSCS) Except for the RJE workstation programs in OS/360, these programs use a variation of BSC known as Multi-leaving. In addition, IBM provides separately ordered workstation programs using BSC. Systems Network Architecture (SNA) and TCP/IP. Workstation programs are available from IBM and third-party vendors to support all of these protocols: 2770/3770 2780/3780 Multileaving Network Job Entry (NJE) OS/360 RJE SNA TCP/IP

  Read more →
• 

  Signal transfer function

  The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}

  Read more →
• 

  Cambridge Semantics

  Cambridge Semantics is a privately held company headquartered in Boston, Massachusetts with an office in San Diego, California. The company is an enterprise big data management and exploratory analytics software company. == History == Cambridge Semantics was founded in 2007 by Sean Martin, Lee Feigenbaum, Simon Martin, Rouben Meschian, Ben Szekely and Emmett Eldred who all previously worked at IBM's Advanced Technology Internet Group. In 2012, Cambridge Semantics appointed Chuck Pieper as chief executive. Pieper was previously at Credit Suisse. In January 2016, Cambridge Semantics acquired SPARQL City and its graph database intellectual property. On April 18, 2024, Altair Engineering acquired Cambridge Semantics. On 26 March 2025, Siemens announced the acquisition of Altair. == Products == Anzo Smart Data Lake uses Semantic Web Technologies. It allows IT departments and their business users to access data. AnzoGraph DB Graph database. AnzoGraph DB is a massively parallel processing (MPP) native graph database built for diverse data harmonization and analytics at scale (trillions of triples and more), speed and deep link insights. It is used for embedded analytics that require graph algorithms, graph views, named queries, aggregates, geospatial, built-in data science functions, data warehouse-style BI and reporting functions. It allows users to load and query RDF data using SPARQL or Cypher for OLAP-style analytics. == Marketing == Cambridge Semantics named SIIA Codie award 2018 finalist. Cambridge Semantics named 2018 Gold Stevie Award Winner for 'Big Data Solutions'. Cambridge Semantics named KMWorld’s 2018 ‘100 Companies That Matter in Knowledge Management’. Cambridge Semantics named to Database Trends and Applications' 'Trend-Setting Products in Data and Information Management for 2018'. Cambridge Semantics named to KMWorld Trend-Setting Products of 2017. Cambridge Semantics named to Database Trends and Applications 'DBTA 100: The Companies That Matter Most in Data'. Cambridge Semantics named SIIA Codie award 2017 winner for ‘Best Text Analytics and Semantic Technology Solution’. Cambridge Semantics named 2017 Silver Stevie Award Winner for 'Big Data Solutions'. Cambridge Semantics named KMWorld’s 2017 ‘100 Companies That Matter in Knowledge Management’. Cambridge Semantics named SIIA Codie award 2016 finalist. Cambridge Semantics named KMWorld’s 2016 ‘100 Companies That Matter in Knowledge Management’ and KMWorld Trend-Setting Products of 2015. Cambridge Semantics named 2016 Bio-IT World Best of Show People's Choice Award Contenders and 2015 Bio-IT best of show finalist. Anzo Insider Trading Investigation and Surveillance named 2015 CODiE Award finalist. Cambridge Semantics Selected as Finalist for 2014 MIT Sloan CIO Symposium's Innovation Showcase. Cambridge Semantics named SIIA CODiE Award 2014 finalist. Cambridge Semantics Win 2013 SIIA CODiE Award for best business intelligence and analytics solution. Cambridge Semantics wins KMWorld 2012 Promise Award. Cambridge Semantics wins Best of Show at 2012 Bio-IT World Conference.

  Read more →
• 

  Transparent decryption

  Transparent decryption is a method of decrypting data which unavoidably produces evidence that the decryption operation has taken place. The idea is to prevent the covert decryption of data. In particular, transparent decryption protocols allow a user Alice to share with Bob the right to access data, in such a way that Bob may decrypt at a time of his choosing, but only while simultaneously leaving evidence for Alice of the fact that decryption occurred. Transparent decryption supports privacy, because this evidence alerts data subjects to the fact that information about them has been decrypted and disincentivises data misuse. Recent work further formalizes transparent decryption and explores practical implementations based on cryptographic protocols and blockchain systems. == Applications == Transparent decryption has been proposed for several systems where there is a need to simultaneously achieve accountability and secrecy. For example: In lawful interception, law enforcement agencies can access private messages and emails. Transparent decryption can make such accesses accountable, giving citizens guarantees about how their private information is accessed. Data arising from vehicles and IoT devices may contain personal information about the vehicle or device owners and their activities. Nevertheless, the data is typically processed in order to provide user functionality and also to investigate and fight crime. Transparent decryption can be used to help users monitor when and how data about them is being accessed and used. == Implementation == In transparent decryption, the decryption key is distributed among a set of agents (called trustees); they use their key share only if the required transparency conditions have been satisfied. Typically, the transparency condition can be formulated as the presence of the decryption request in a distributed ledger. == Alternative solutions == Besides transparent decryption, some other techniques have been proposed for achieving law enforcement while preserving privacy. Solutions that allow competing parties to unify their data access policies. Attribute-based encryption with oblivious attribute translation (OTABE) is an extension of attribute-based encryption that allows translation between proprietary attributes belonging to different organisations, and it has been applied to the problem of law-enforcement access to phone call metadata. Solutions that rely on sophisticated cryptography, such as zero-knowledge proofs that the actions of law enforcement is consistent with judge rulings and the actions of companies, and multi-party computation to compute results.

  Read more →