AI Chatbot No Filter No Limit

AI Chatbot No Filter No Limit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Clapper (service)

Clapper is an American short-form video-hosting service headquartered in Dallas, Texas. It was founded in 2020 by Edison Chen as an alternative for TikTok for mature audiences. The app is functionally similar to TikTok and includes tipping and e-commerce features. Following an influx of far-right content in early 2021, Clapper strengthened its moderation practices. It achieved 2 million monthly active users by 2023, and the number of downloads increased after a U.S. bill that would potentially ban TikTok in the country was signed in 2024. == History == With its offices in Dallas, Texas, Clapper was founded in July 2020 by Chinese-American entrepreneur Edison Chen. Chen considered that most online platforms, such as TikTok, were being targeted to young generations, such as Generation Z. He then concepted Clapper as a service with short-form content for mature audiences among Generation X and millennials, while not intending to compete directly with TikTok. Clapper averaged fewer than ten thousand daily active users during 2020, reaching 500 thousand downloads in the next year. Initially without paying for external advertising, the company raised about $3 million during a 2021 seed funding round. In 2023, the app reportedly reached about 300 to 400 thousand daily active users and 2 million monthly active users. The average user was between the ages of 35 and 55. Following the April 2024 signing of the Protecting Americans from Foreign Adversary Controlled Applications Act, which would potentially enact a ban on TikTok in the U.S. in January 2025, Clapper averaged 200 thousand weekly downloads. In 2025, before the day scheduled for the ban (January 19), TikTok users migrated to other apps. As a result, Clapper received 1.4 million new downloads in a week preceding the date. It was listed as the third most-downloaded free app on Apple's App Store on January 14, behind Xiaohongshu and Lemon8, and the term "TikTok refugee" became a trending term. == Features == Clapper presents similarities with TikTok in its layout, including "Following" and "For You" tabs with videos up to three minutes long that can be liked, commented on or shared. A "Clapback" feature allows users to create responses to videos from others. Users can create livestreams and chat rooms in the app. Users can tip Clapper creators through its Clapper Fam monetization feature, in place of in-app advertisements. The Clapper Shop allows for e-commerce between users. The service had distributed $10 million to its users in total by 2023, according to Clapper CEO Chen. == Content == Clapper includes a policy requiring users to be at least 17 years of age, although Clapper CEO Chen described that "there is no adult content" on the platform. Lindsay Dodgson of Business Insider described the content as generally outdated and "reminiscent of 'getting owned' compilations of the earlier internet." The Washington Post's Tatum Hunter characterized Clapper as including sexual or engagement baiting content more prevalently than TikTok. === Moderation === Clapper's team, which had fifteen employees in early 2021, initially stated it would not moderate content as strictly as TikTok and would mostly rely on user reports. Following that year's January 6 United States Capitol attack, far-right conservative videos promoting QAnon and anti-vaccine conspiracy theories appeared on Clapper's "For You" page to a substantial degree for weeks. The videos were made in protest against decisions by platforms, particularly TikTok, to ban such content. Clapper's team stated in January 10 that its rules prohibiting incitements to violence would be strictly enforced. By February, videos and accounts promoting the conspiracy theories had been removed, and QAnon-related content was banned permanently. Clapper's team hired more content auditors and implemented moderation by artificial intelligence for further community guideline violations.
Read more →
IAmAnas

#IAmAnas (I Am Anas) is a Twitter hashtag and social media campaign that started in 2015. Users tweeted to express support for the undercover investigative works of Ghanaian journalist Anas Aremeyaw Anas. The campaign restarted in 2018 when the Ghanaian MP and financier of the New Patriotic Party, Kennedy Agyapong, announced his intention to reveal the identity of Anas following the journalist's exposé of corruption at the Ghana Football Association. Anas maintains that "being anonymous has always been his secret weapon." Pictures purported to be of Anas were first released by a TV station owned by Agyapong, and were quickly picked up by other media houses. At least one person, a Dutch-Brazilian model, has claimed ownership of one picture that was released, and has threatened legal action against Agyapong for possibly putting his life in danger. In response to Agyapong, social media users retweeted photos of themselves, random people, or even comic images of entities that resemble the trademark covered face of Anas. When the hashtag first began in 2015, along with other popular uses of the journalist's name, Elizabeth Ohene wrote an article about Ghanaians use of humour in response to dealing with the expose of government corruption. "I do not know when these words will make it into Wikipedia or the Oxford English Dictionary but for the moment you can take it from me that: To go undercover is to anas, to make secret recordings is to anas-anas, to wear disguises is to do an anas, to be caught in the act is to be anased. To have someone exposed taking bribes is to have that person being given the full Anas Aremeyaw Anas."
Read more →
BitClout

BitClout was an open source blockchain-based social media platform. On the platform, users could post short-form writings and photos, award money to posts they particularly like by clicking a diamond icon, as well as buy and sell "creator coins" (personalized tokens whose value depends on people's reputations). BitClout ran on a custom proof of work blockchain, and was a prototype of what can be built on DeSo (short for "Decentralized Social"). BitClout's founder and primary leader is Nader al-Naji, known pseudonymously as "Diamondhands". Under development since 2019, BitClout's blockchain created its first block in January 2021, and BitClout itself launched publicly in March 2021. The platform launched with 15,000 "reserved" accounts — a move intended to prevent impersonation, but which backfired as some people with reserved accounts tried to actively distance themselves. Later, in September 2021, BitClout was revealed to be the flagship product of the DeSo blockchain. == History == === Origins (2019 - March 2021) === In early 2019, Nader al-Naji became interested in "mixing investing and social media". He started creating a custom blockchain in May 2019, but didn't tell anyone else until November 2020. However, in the fall of 2020, al-Naji pitched BitClout's own investors under his real name and began posting job listings for a "new operation". Although BitClout was not originally intended to launch until mid-2021, its development was sped up due to "zeitgeist about decentralized social media" in January 2021. BitClout's first block was mined on 18 January 2021. Its next block was mined on 1 March 2021. === As BitClout (March - September 2021) === In early March 2021, about fifty investors received links to a password-protected website with the BitClout white paper. They were encouraged to explore the site and send the same link to "two or three other 'trusted contacts'". Within weeks users were spending millions of dollars per day on the platform. The platform's founders said they were "completely unprepared", having planned to have a "soft-launch". The leader went by the name "diamondhands" on the platform. On 24 March 2021, BitClout launched out of private beta. Investors include Sequoia Capital, Andreessen Horowitz, the venture capital firm Social Capital, Coinbase Ventures, Winklevoss Capital Management, Alexis Ohanian, Polychain, Pantera, and Digital Currency Group (CoinDesk's parent company). During its initial launch, BitClout's currency could be bought with bitcoin, but not sold except on Discord servers or Twitter threads. A single bitcoin wallet related to BitClout received more than $165M worth of deposits. In March 2021, law firm Anderson Kill P.C. sent Nader al-Naji, the presumed leader of the BitClout platform, a cease-and-desist letter, demanding the removal of Brandon Curtis's account and alleging that BitClout violated sections 1798 and 3344 of the California Civil Code by using Curtis's name and likeness without his consent. Curtis also tweeted, "Adopting Bitcoin's aesthetic to raise VC funding to carry out unethical and blatantly illegal schemes like BitClout: not cool". (However, Curtis's coin, despite not being listed on the official website, can still be bought by users searching for the original username.) Additionally, in April 2021, Lee Hsien Loong asked for his name and photograph to be removed from the site, stating that he has "nothing to do with the platform" and that "it is misleading and done without [his] permission". On 18 May 2021, diamondhands announced that 100% of the BitClout code went public. On 12 June 2021, the supply of BitClout was capped at around 11 million coins. On 18 July 2021, BitClout added the ability for users to mint and purchase NFTs within the platform. === As part of DeSo (September 2021 - July 2024) === On 21 September 2021, it was revealed that BitClout was a prototype built on DeSo, short for "Decentralized Social". As a part of this revelation, diamondhands confirmed his identity as Nader al-Naji. (As early as April 2021, it had been believed that diamondhands indeed was that person.)The Bitclout project raised $200M in funding, which went to setting up the DeSo Foundation. === End and aftermath (July 2024 - present) === In July 2024, al-Naji was arrested by the FBI and charged with wire fraud involving BitClout. He also faced civil charges of securities fraud and unregistered offers and sales of securities from the Securities and Exchange Commission. In response, the official "deso" account posted that al-Naji was "safe and at home" and "that this experience has only reinforced [his] commitment to DeSo". In February 2025, the Justice Department dropped its case against al-Naji. In March 2026, the SEC voluntarily dismissed the enforcement case with prejudice. == Design == BitClout is a social media platform. Its users can post short-form writings and photos (similarly to Twitter). They can award money to posts they particularly like by clicking a diamond icon (similarly to Twitch Bits). The prices of each account's "creator coin" goes up and down with the popularity of the celebrity behind it. For example, if someone says something negative, the value of their corresponding account may go down. This price is computed automatically according to the formula p r i c e _ i n _ b i t c l o u t = .003 ∗ c r e a t o r _ c o i n s _ i n _ c i r c u l a t i o n 2 {\displaystyle price\_in\_bitclout=.003creator\_coins\_in\_circulation^{2}} . At launch time, BitClout scraped 15,000 profiles of celebrities from Twitter to create "reserved" accounts in their names. To claim a reserved account, the account holder would need to tweet about it (which also serves as a marketing strategy). At least 80 such reserved profiles have been claimed. Proof of stake was introduced in March 2024.
Read more →
FaceApp

FaceApp is a photo and video editing application for iOS and Android developed by FaceApp Technology Limited, a company based in Cyprus. The app generates highly realistic transformations of human faces in photographs by using neural networks. The app can transform a face to make it smile, look younger, look older, or change gender. == History == FaceApp was launched on iOS in January 2017 and on Android in February 2017. It was developed by Yaroslav Goncharov, a former executive at Yandex, and created by the Russian company Wireless Lab. == Features == There are multiple options to manipulate the photo uploaded such as editor options of adding an impression, make-up, smiles, hair colors, hairstyles, glasses, age or beards. Filters, lens blur and backgrounds along with overlays, tattoos, and vignettes are also a part of the app. The gender change transformations of FaceApp have attracted particular interest from the LGBT and transgender communities, due to their ability to realistically simulate the appearance of a person as the opposite gender. == Criticism == In 2017, FaceApp faced criticism for a "hot" filter that appeared to lighten users' skin tones, prompting accusations of racial bias. The feature was briefly renamed "spark" before being removed. Founder Yaroslav Goncharov attributed the issue to training data bias and apologized. In August of that year, more criticism arose when it featured "ethnicity filters" depicting "White", "Black", "Asian", and "Indian". The filters were immediately removed from the app. In 2019, FaceApp faced criticism over its handling of user data, including concerns that it stored users' photos on its servers and could use them for commercial purposes. Founder Yaroslav Goncharov stated that images were processed on cloud servers like Google Cloud Platform and Amazon Web Services, not transferred to Russia, and were temporarily stored only to support editing functions before being deleted. U.S. Senator Chuck Schumer raised concerns about data privacy and called for an FBI investigation.
Read more →
Snap (computer graphics)

In computer graphics, snapping allows an object to be easily positioned in alignment with grid lines, guide lines or another object, by causing it to automatically jump to an exact position when the user drags it to the proximity of the desired location. Some CAD software provides a "Snap" pull-down menu with diverse options as preferences for the practice of the operation. In Windows, with the "snap windows" option enabled, snapping a window against the top (or side) edge of the screen causes it to change into full screen (or half-screen for multitasking). Software snapping is analogous to hardware detents which serve to indicate discrete values or steps of an input device.
Read more →
Dynamic web page

A dynamic web page is a web page constructed at runtime (during software execution), as opposed to a static web page, delivered as it is stored. A server-side dynamic web page is a web page whose construction is controlled by an application server processing server-side scripts. In server-side scripting, parameters determine how the assembly of every new web page proceeds, and including the setting up of more client-side processing. A client-side dynamic web page processes the web page using JavaScript running in the browser as it loads. JavaScript can interact with the page via Document Object Model (DOM), to query page state and modify it. Even though a web page can be dynamic on the client-side, it can still be hosted on a static hosting service such as GitHub Pages or Amazon S3 as long as there is not any server-side code included. A dynamic web page is then reloaded by the user or by a computer program to change some variable content. The updating information could come from the server, or from changes made to that page's DOM. This may or may not truncate the browsing history or create a saved version to go back to, but a dynamic web page update using AJAX technologies will neither create a page to go back to, nor truncate the web browsing history forward of the displayed page. Using AJAX, the end user gets one dynamic page managed as a single page in the web browser while the actual web content rendered on that page can vary. The AJAX engine sits only on the browser requesting parts of its DOM, the DOM, for its client, from an application server. A particular application server could offer a standardized REST style interface to offer services to the web application. DHTML is the umbrella term for technologies and methods used to create web pages that are not static web pages, though it has fallen out of common use since the popularization of AJAX, a term which is now itself rarely used. Client-side-scripting, server-side scripting, or a combination of these make for the dynamic web experience in a browser. == Basic concepts == Classical hypertext navigation, with HTML or XHTML alone, provides "static" content, meaning that the user requests a web page and simply views the page and the information on that page. However, a web page can also provide a "live", "dynamic", or "interactive" user experience. Content (text, images, form fields, etc.) on a web page can change, in response to different contexts or conditions. There are two ways to create this kind of effect: Using client-side scripting to change interface behaviors within a specific web page, in response to mouse or keyboard actions, data received from a web API, websocket or at specified timing events. In this case the dynamic behavior occurs within the presentation. Using server-side scripting to change the supplied page source code between pages, adjusting the sequence or reload of the web pages or web content supplied to the browser. Server responses may be determined by such conditions as data in a posted HTML form, parameters in the URL, the type of browser being used, the passage of time, or a database or server state. Web pages that use client-side scripting must use presentation technology broadly called rich interfaced pages. Client-side scripting languages like JavaScript or ActionScript, used for Dynamic HTML (DHTML) and Flash technologies respectively, are frequently used to orchestrate media types (sound, animations, changing text, etc.) of the presentation. The scripting also allows use of remote scripting, a technique by which the DHTML page requests additional information from a server, using a hidden Frame, XMLHttpRequests, or a web service. It is also possible to use a web framework to create a web API, which the client, via the use of JavaScript, uses to obtain data and alter its appearance or behavior dynamically depending on the data. Web pages that use server-side scripting are often created with the help of server-side languages such as PHP, Perl, ASP, JSP, ColdFusion and other languages. These server-side languages typically use the Common Gateway Interface (CGI) to produce dynamic web pages. These kinds of pages can also use, on the client-side, the first kind (DHTML, etc.). == History == It is difficult to be precise about "dynamic web page beginnings" or chronology because the precise concept makes sense only after the "widespread development of web pages". HTTP has existed since 1989, HTML, publicly standardized since 1996. The web browser's rise in popularity started with Mosaic in 1993. Between 1995 and 1996, multiple dynamic web products were introduced to the market, including Coldfusion, WebObjects, PHP, and Active Server Pages. The introduction of JavaScript (then known as LiveScript) enabled the production of client-side dynamic web pages, with JavaScript code executed in the client's browser. The letter "J" in the term AJAX originally indicated the use of JavaScript, as well as XML. With the rise of server side JavaScript processing, for example, Node.js, originally developed in 2009, JavaScript is also used to dynamically create pages on the server that are sent fully formed to clients. MediaWiki, the content management system that powers Wikipedia, is an example for an originally server-side dynamic web page, interacted with through form submissions and URL parameters. Throughout time, progressively enhancing extensions such as the visual editor have also added elements that are dynamic on the client side, while the original dynamic server-side elements such as the classic edit form remain available to be fallen back on (graceful degradation) in case of error or incompatibility. == Server-side scripting == A program running on a web server is used to generate the web content on various web pages, manage user sessions, and control workflow. Server responses may be determined by such conditions as data in a posted HTML form, parameters in the URL, the type of browser being used, the passage of time, or a database or server state. Such web pages are often created with the help of server-side languages such as ASP, ColdFusion, Java, JavaScript, Perl, PHP, Ruby, Python, and other languages, by a support server that can run on the same hardware as the web server. These server-side languages often use the Common Gateway Interface (CGI) to produce dynamic web pages. Two notable exceptions are ASP.NET, and JSP, which reuse CGI concepts in their APIs but actually dispatch all web requests into a shared virtual machine. The server-side languages are used to embed tags or markers within the source file of the web page on the web server. When a user on a client computer requests that web page, the web server interprets these tags or markers to perform actions on the server. For example, the server may be instructed to insert information from a database or information such as the current date. Dynamic web pages are often cached when there are few or no changes expected and the page is anticipated to receive considerable amount of web traffic that would wastefully strain the server and slow down page loading if it had to generate the pages on the fly for each request. == Client-side scripting == Client-side scripting is changing interface behaviors within a specific web page in response to input device actions, or at specified timing events. In this case, the dynamic behavior occurs within the presentation. The client-side content is generated on the user's local computer system. Such web pages use presentation technology called rich interfaced pages. Client-side scripting languages like JavaScript or ActionScript, used for Dynamic HTML (DHTML) and Flash technologies respectively, are frequently used to orchestrate media types (sound, animations, changing text, etc.) of the presentation. Client-side scripting also allows the use of remote scripting, a technique by which the DHTML page requests additional information from a server, using a hidden frame, XMLHttpRequests, or a Web service. The first public use of JavaScript was in 1995, when the language was implemented in Netscape Navigator 2, standardized as ECMAScript two years later. Example The client-side content is generated on the client's computer. The web browser retrieves a page from the server, then processes the code embedded in the page (typically written in JavaScript) and displays the retrieved page's content to the user. The innerHTML property (or write command) can illustrate the client-side dynamic page generation: two distinct pages, A and B, can be regenerated (by an "event response dynamic") as document.innerHTML = A and document.innerHTML = B; or "on load dynamic" by document.write(A) and document.write(B). == Combination technologies == All of the client and server components that collectively build a dynamic web page are called a web application. Web applications manage user interactions, state, security, and performance. Ajax uses a combination of both client-side script
Read more →
Feature detection (web development)

Feature detection (also feature testing) is a technique used in web development for handling differences between runtime environments (typically web browsers or user agents), by programmatically testing for clues that the environment may or may not offer certain functionality. This information is then used to make the application adapt in some way to suit the environment: to make use of certain APIs, or tailor for a better user experience. Its proponents claim it is more reliable and future-proof than other techniques like user agent sniffing and browser-specific CSS hacks. == Techniques == A feature test can take many forms. It is essentially any snippet of code which gives some level of confidence that a required feature is indeed supported. However, in contrast to other techniques, feature detection usually focuses on performing actions which directly relate to the feature to be detected, rather than heuristics. === JavaScript === JavaScript feature detection can inspect the DOM and the local JavaScript environment to test whether browser features or APIs are supported. The simplest technique is to check for the existence of a relevant object or property. For example, the Geolocation API (used for accessing the device's knowledge of its geographical location, possibly obtained from a GPS navigation device) exposes a geolocation property on the navigator object in the DOM; the presence of which implies the Geolocation API is supported: if ('geolocation' in navigator) { // Geolocation API is supported } For a higher level of confidence, some feature tests will attempt to invoke the feature then look for clues that it behaved properly. For example, a test for support for cookies might attempt to set a value as a cookie and then verify it can be read back. === CSS === In CSS, the at-rule @supports introduced in 2015 allows to test if a given feature is supported. For instance the following code activates the declarations only if the user agent supports display: flex: == Undetectables == Some browser features are considered undetectable, because no clues are known to give sufficient confidence that a feature is supported. These are often because of limited information available to the JavaScript environment in the browser; generally features must be exposed via the DOM in some way in order to be detectable using JavaScript. When undetectables are encountered, it is common to turn to user agent sniffing as an alternative mechanism, or to employ defensive coding to minimise the impact if the feature turns out not to be supported. The Modernizr project maintains a record of known undetectables on their wiki.
Read more →
Information Age

The Information Age is a historical period that began in the mid-20th century. It is characterized by a rapid shift from traditional industries, as established during the Industrial Revolution, to an economy centered on information technology. The onset of the Information Age has been linked to the development of the transistor in 1947. Advances in computer miniaturization, internet communication, and semiconductor technology enabled the rapid expansion of digital systems and global information networks. The Information Age transformed industries such as education, healthcare, finance, entertainment, and communication through digital infrastructure and connected technologies. The rise of smartphones and cloud-based services further accelerated global internet accessibility and digital interaction. == Digital applications and mobile technology == The expansion of Android and iOS ecosystems during the 21st century contributed to the widespread use of utility applications and mobile productivity tools. Applications related to calculations, scheduling, digital organization, and educational support became increasingly common on smartphones and tablets. Mobile utility software demonstrates how modern digital platforms support accessibility and everyday online services. Independent developers have contributed to this technological ecosystem through lightweight applications focused on mobile usability and internet-based functionality. == Influence on modern society == The Information Age has reshaped the way individuals communicate, consume information, and interact with digital services. Social media platforms, artificial intelligence systems, cloud storage, and mobile computing continue to influence modern economies and online communities worldwide. Emerging technologies such as the Internet of things, machine learning, and advanced automation are often associated with the transition toward the Fourth Industrial Revolution. == History == The digital revolution converted technology from analog format to digital format. By doing this, it became possible to make copies that were identical to the original. In digital communications, for example, repeating hardware was able to amplify the digital signal and pass it on with no loss of information in the signal. Of equal importance to the revolution was the ability to easily move the digital information between media and to access or distribute it remotely. One turning point of the revolution was the change from analog to digitally recorded music. During the 1980s, the digital format of optical compact discs gradually replaced analog formats, such as vinyl records and cassette tapes, as the popular medium of choice. === Previous inventions === Humans have manufactured tools for counting and calculating since ancient times, such as the abacus, astrolabe, equatorium, and mechanical timekeeping devices. More complicated devices started appearing in the 1600s, including the slide rule and mechanical calculators. By the early 1800s, the Industrial Revolution had produced mass-market calculators like the arithmometer and the enabling technology of the punch card. Charles Babbage proposed a mechanical general-purpose computer called the Analytical Engine, but it was never successfully built, and was largely forgotten by the 20th century, and unknown to most of the inventors of modern computers. The Second Industrial Revolution, in the last quarter of the 19th century, developed useful electrical circuits and the telegraph. In the 1880s, Herman Hollerith developed electromechanical tabulating and calculating devices using punch cards and unit record equipment, which became widespread in business and government. Meanwhile, various analog computer systems used electrical, mechanical, or hydraulic systems to model problems and calculate answers. These included an 1872 tide-predicting machine, differential analysers, perpetual calendar machines, the Deltar for water management in the Netherlands, network analyzers for electrical systems, and various machines for aiming military guns and bombs. The construction of problem-specific analog computers continued in the late 1940s and beyond, with FERMIAC for neutron transport, Project Cyclone for various military applications, and the Phillips Machine for economic modeling. Building on the complexity of the Z1 and Z2, German inventor Konrad Zuse used electromechanical systems to complete in 1941 the Z3, the world's first working programmable, fully automatic digital computer. Also, during World War II, Allied engineers constructed electromechanical bombes to break the German Enigma machine encoding. The base-10 electromechanical Harvard Mark I was completed in 1944, and was to some degree improved with inspiration from Charles Babbage's designs. === 1947–1969: Origins === In 1947, the first working transistor, the germanium-based point-contact transistor, was invented by John Bardeen and Walter Houser Brattain while working under William Shockley at Bell Labs. This led the way to more advanced digital computers. From the late 1940s, universities, the military, and businesses developed computer systems to digitally replicate and automate previously manually performed mathematical calculations, with the LEO being the first commercially available general-purpose computer. Digital communication became economical for widespread adoption after the invention of the personal computer in the 1970s. Claude Shannon, a Bell Labs mathematician, is generally credited with laying the foundations of digitalization in his pioneering 1948 article, A Mathematical Theory of Communication. In 1948, Bardeen and Brattain patented an insulated-gate transistor (IGFET) with an inversion layer. Their concept forms the basis of CMOS and DRAM technology today. In 1957, at Bell Labs, Frosch and Derick were able to manufacture planar silicon dioxide transistors, later a team at Bell Labs demonstrated a working MOSFET. The first integrated circuit milestone was achieved by Jack Kilby in 1958. Other important technological developments included the invention of the monolithic integrated circuit chip by Robert Noyce at Fairchild Semiconductor in 1959, made possible by the planar process developed by Jean Hoerni. In 1963, complementary MOS (CMOS) was developed by Chih-Tang Sah and Frank Wanlass at Fairchild Semiconductor. The self-aligned gate transistor, which further facilitated mass production, was invented in 1966 by Robert Bower at Hughes Aircraft and independently by Robert Kerwin, Donald Klein, and John Sarace at Bell Labs. In 1962, AT&T deployed the T-carrier for long-haul pulse-code modulation (PCM) digital voice transmission. The T1 format carried 24 pulse-code modulated, time-division multiplexed speech signals, each encoded in 64 kbit/s streams, leaving 8 kbit/s of framing information, which facilitated the synchronization and demultiplexing at the receiver. Over the subsequent decades, the digitisation of voice became the norm for all but the last mile (where analogue continued to be the norm right into the late 1990s). Following the development of MOS integrated circuit chips in the early 1960s, MOS chips reached higher transistor density and lower manufacturing costs than bipolar integrated circuits by 1964. MOS chips further increased in complexity at a rate predicted by Moore's law, leading to large-scale integration (LSI) with hundreds of transistors on a single MOS chip by the late 1960s. The application of MOS LSI chips to computing was the basis for the first microprocessors, as engineers began recognizing that a complete computer processor could be contained on a single MOS LSI chip. In 1968, Fairchild engineer Federico Faggin improved MOS technology with his development of the silicon-gate MOS chip, which he later used to develop the Intel 4004, the first single-chip microprocessor. It was released by Intel in 1971 and laid the foundations for the microcomputer revolution that began in the 1970s. MOS technology also led to the development of semiconductor image sensors suitable for digital cameras. The first such image sensor was the charge-coupled device, developed by Willard S. Boyle and George E. Smith at Bell Labs in 1969, based on MOS capacitor technology. === 1969–1989: Invention of the internet, rise of home computers === The public was first introduced to the concepts that led to the Internet when a message was sent over the ARPANET in 1969. Packet switched networks such as ARPANET, Mark I, CYCLADES, Merit Network, Tymnet, and Telenet, were developed in the late 1960s and early 1970s using a variety of protocols. The ARPANET in particular led to the development of protocols for internetworking, in which multiple separate networks could be joined into a network of networks. The Whole Earth movement of the 1960s advocated the use of new technology. In the 1970s, the home computer was introduced, time-sharing computers, the video game console, the first coin-op vide
Read more →
Machine vision

Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the
Read more →
OpenWebRTC

OpenWebRTC (OWR) is a free software stack that implements the WebRTC standard, a set of protocols and application programming interfaces defined by the World Wide Web Consortium (W3C) and the Internet Engineering Task Force (IETF). It is an alternative to the reference implementation that is based on software from Global IP Solutions (GIPS). It is published under the terms of the Simplified (2-clause) BSD license and officially supports iOS, Linux, OS X, and Android operating systems. It is meant to also work outside web browsers, e.g. to power native mobile apps. It is mostly written in C and based largely on the multimedia framework GStreamer and a number of other, smaller external libraries. It officially supports both VP8 and H.264 as video formats. For H.264 it uses OpenH264 to which Cisco pays the patent licensing bills. Development of OpenWebRTC started at Ericsson Research under the lead of Stefan Ålund. They released it as free software in September 2014, together with the proof-of-concept web browser "Bowser" that is based on the stack. Among other things, this initial version didn't support data channels yet and was said to still be less mature than Google's reference implementation.
Read more →
Infone

Infone was a service launched by Metro One Telecommunications in 2003. The service was discontinued effective December 14, 2005. == How it worked == Infone included directory assistance and other services via a toll-free phone number. A user could call 888-411-1111 to request directory assistance, directions, traffic information, movie times, call completion, dinner reservation assistance and other services. Infone provided a number of innovative 411 'concierge'-like services, including movie listings from a live operator, and offered a feature where they could provide information from a linked Microsoft Outlook calendar when set up in advance. For a period of time they advertised heavily on U.S. television, featuring ads with then Governor of Minnesota Jesse Ventura, emphasizing their use of all U.S. based operators. The price offered was $0.89 per call up to 15 minutes (for use when the operator connects you to the requested number, as well as for additional information requests afterwards), with $0.05 for each additional minute, making Infone also a competitively priced long-distance service. New users received 5–10 free calls. Infone identified a registered user (along with billing information; the service was only payable by credit card) by caller ID (numbers were registered on signing up) and by an advanced voiceprint recognition system (VPRS) from SpeechWorks that identified the user when the user called from an unregistered telephone number (or no caller ID) through the use of a personal phrase spoken by the user (e.g., "Hello Infone!") after the welcome tone.
Read more →
ISO/IEC 11801

International standard ISO/IEC 11801 Information technology — Generic cabling for customer premises specifies general-purpose telecommunication cabling systems (structured cabling) that are suitable for a wide range of applications (analog and ISDN telephony, various data communication standards, building control systems, factory automation). It is published by ISO/IEC JTC 1/SC 25/WG 3 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It covers both balanced copper cabling and optical fibre cabling. The standard was designed for use within commercial premises that may consist of either a single building or of multiple buildings on a campus. It was optimized for premises that span up to 3 km, up to 1 km2 office space, with between 50 and 50,000 persons, but can also be applied for installations outside this range. A major revision was released in November 2017, unifying requirements for commercial, home and industrial networks. == Classes and categories == The standard defines several link/channel classes and cabling categories of twisted-pair copper interconnects, which differ in the maximum frequency for which a certain channel performance is required: Class A: Up to 100 kHz using Category 1 cable and connectors Class B: Up to 1 MHz using Category 2 cable and connectors Class C: Up to 16 MHz using Category 3 cable and connectors Class D: Up to 100 MHz using Category 5e cable and connectors Class E: Up to 250 MHz using Category 6 cable and connectors Class EA: Up to 500 MHz using category 6A cable and connectors (Amendments 1 and 2 to ISO/IEC 11801, 2nd Ed.) Class F: Up to 600 MHz using Category 7 cable and connectors Class FA: Up to 1 GHz (1000 MHz) using Category 7A cable and connectors (Amendments 1 and 2 to ISO/IEC 11801, 2nd Ed.) Class BCT-B: Up to 1 GHz (1000 MHz) using with coaxial cabling for BCT applications. (ISO/IEC 11801-1, Edition 1.0 2017-11) Class I: Up to 2 GHz (2000 MHz) using Category 8.1 cable and connectors (ISO/IEC 11801-1, Edition 1.0 2017-11) Class II: Up to 2 GHz (2000 MHz) using Category 8.2 cable and connectors (ISO/IEC 11801-1, Edition 1.0 2017-11) The standard link impedance is 100 Ω. (The older 1995 version of the standard also permitted 120 Ω and 150 Ω in Classes A−C, but this was removed from the 2002 edition.) The standard defines several classes of optical fiber interconnect: OM1: Multimode, 62.5 μm core; minimum modal bandwidth of 200 MHz·km at 850 nm OM2: Multimode, 50 μm core; minimum modal bandwidth of 500 MHz·km at 850 nm OM3: Multimode, 50 μm core; minimum modal bandwidth of 2000 MHz·km at 850 nm OM4: Multimode, 50 μm core; minimum modal bandwidth of 4700 MHz·km at 850 nm OM5: Multimode, 50 μm core; minimum modal bandwidth of 4700 MHz·km at 850 nm and 2470 MHz·km at 953 nm OS1: Single-mode, maximum attenuation 1 dB/km at 1310 and 1550 nm OS1a: Single-mode, maximum attenuation 1 dB/km at 1310, 1383, and 1550 nm OS2: Single-mode, maximum attenuation 0.4 dB/km at 1310, 1383, and 1550 nm Grandfathered === OM5 === OM5 fiber is designed for wideband applications using SWDM multiplexing of 4–16 carriers (40G=4λ×10G, 100G=4λ×25G, 400G=4×4λ×25G) in the 850–953 nm range. === Category 7 === Class F channel and Category 7 cable are backward compatible with Class D/Category 5e and Class E/Category 6. Class F features even stricter specifications for crosstalk and system noise than Class E. To achieve this, shielding was added for individual wire pairs and the cable as a whole. Unshielded cables rely on the quality of the twists to protect from EMI. This involves a tight twist and carefully controlled design. Cables with individual shielding per pair such as Category 7 rely mostly on the shield and therefore have pairs with longer twists. The Category 7 cable standard was ratified in 2002, and primarily introduced to support 10 gigabit Ethernet over 100 m of copper cabling. Like the earlier standards, it contains four twisted copper wire pairs rated for transmission frequencies of up to 600 MHz. However, in 2006, Category 6A was ratified for Ethernet to allow 10 Gbit/s while still using the conventional 8P8C connector. Care is required to avoid signal degradation by mixing cable and connectors not designed for that use, however similar. Most manufacturers of active equipment and network cards have chosen to support the 8P8C for their 10 gigabit Ethernet products on copper and not GG45, ARJ45, or TERA connectors as Class F would have originally called for. Therefore, the Category 6 specification was revised to Category 6A to permit this use; products therefore require a Class EA channel (ie, Cat 6A). As of 2019, some equipment has been introduced which has connectors supporting the Class F (Category 7) channel. Note, however, that Category 7 is not recognized by the TIA/EIA. === Category 7A === Class FA (Class F Augmented) channels and Category 7A cables, introduced by ISO 11801 Edition 2 Amendment 2 (2010), are defined at frequencies up to 1000 MHz. The intent of the Class FA was to possibly support the future 40 gigabit Ethernet: 40GBASE-T. Simulation results have shown that 40 gigabit Ethernet may be possible at 50 meters and 100 gigabit Ethernet at 15 meters. In 2007, researchers at Pennsylvania State University predicted that either 32 nm or 22 nm circuits would allow for 100 gigabit Ethernet at 100 meters. However, in 2016, the IEEE 802.3bq working group ratified the amendment 3 which defines 25GBASE-T and 40GBASE-T on Category 8 cabling specified to 2000 MHz. The Class FA therefore does not support 40G Ethernet. As of 2025, there is no equipment that has connectors supporting the Class FA (Category 7A) channel. Category 7A is not recognized in TIA/EIA. === Category 8 === Category 8 was ratified by the TR43 working group under ANSI/TIA 568-C.2-1. It is defined up to 2000 MHz and only for distances up to 30 m or 36 m, depending on the patch cords used. ISO/IEC JTC 1/SC 25/WG 3 developed the equivalent standard ISO/IEC 11801-1:2017/COR 1:2018, with two options: Class I channel (Category 8.1 cable): minimum cable design U/FTP or F/UTP, fully backward compatible and interoperable with Class EA (Category 6A) using 8P8C connectors; Class II channel (Category 8.2 cable): F/FTP or S/FTP minimum, interoperable with Class FA (Category 7A) using TERA or GG45. == Abbreviations for twisted pairs == Annex E, Acronyms for balanced cables, provides a system to specify the exact construction for both unshielded and shielded balanced twisted pair cables. It uses three letters—U for unshielded, S for braided shielding, and F for foil shielding—to form a two-part abbreviation in the form of xx/xTP, where the first part specifies the type of overall cable shielding, and the second part specifies shielding for individual cable elements. Common cable types include U/UTP (unshielded cable); U/FTP (individual pair shielding without the overall screen); F/UTP, S/UTP, or SF/UTP (overall screen without individual shielding); and F/FTP, S/FTP, or SF/FTP (overall screen with individual foil shielding). == 2017 edition == In November 2017, a new edition was released by ISO/IEC JTC 1/SC 25 "Interconnection of information technology equipment" subcommittee. It is a major revision of the standard which has unified several prior standards for commercial, home, and industrial networks, as well as data centers, and defines requirements for generic cabling and distributed building networks. The new series of standards replaces the former 11801 standard and includes six parts: == Versions == ISO/IEC 11801:1995 (Ed. 1) ISO/IEC 11801:2000 (Ed. 1.1) – Edition 1, Amendment 1 ISO/IEC 11801:2002 (Ed. 2) ISO/IEC 11801:2008 (Ed. 2.1) – Edition 2, Amendment 1 ISO/IEC 11801:2010 (Ed. 2.2) – Edition 2, Amendment 2 ISO/IEC 11801-1:2017, -1:2017/Cor 1:2018, -2:2017, -3:2017, -3:2017/Amd 1:2021, -3:2017/Cor 1:2018, -4:2017, -4:2017/Cor 1:2018, -5:2017, -5:2017/Cor 1:2018, -6:2017, -6:2017/Cor 1:2018 (As of September 2023, this set is current.)
Read more →
SemEval

SemEval (Semantic Evaluation) is an ongoing series of evaluations of computational semantic analysis systems; it evolved from the Senseval word sense evaluation series. The evaluations are intended to explore the nature of meaning in language. While meaning is intuitive to humans, transferring those intuitions to computational analysis has proved elusive. This series of evaluations provides a mechanism to characterize in more precise terms exactly what is necessary to compute in meaning. As such, the evaluations provide an emergent mechanism to identify the problems and solutions for computations with meaning. These exercises have evolved to articulate more of the dimensions that are involved in our use of language. They began with apparently simple attempts to identify word senses computationally. They have evolved to investigate the interrelationships among the elements in a sentence (e.g., semantic role labeling), relations between sentences (e.g., coreference), and the nature of what we are saying (semantic relations and sentiment analysis). The purpose of the SemEval and Senseval exercises is to evaluate semantic analysis systems. "Semantic Analysis" refers to a formal analysis of meaning, and "computational" refer to approaches that in principle support effective implementation. The first three evaluations, Senseval-1 through Senseval-3, were focused on word sense disambiguation (WSD), each time growing in the number of languages offered in the tasks and in the number of participating teams. Beginning with the fourth workshop, SemEval-2007 (SemEval-1), the nature of the tasks evolved to include semantic analysis tasks outside of word sense disambiguation. Triggered by the conception of the SEM conference, the SemEval community had decided to hold the evaluation workshops yearly in association with the SEM conference. It was also the decision that not every evaluation task will be run every year, e.g. none of the WSD tasks were included in the SemEval-2012 workshop. == History == === Early evaluation of algorithms for word sense disambiguation === From the earliest days, assessing the quality of word sense disambiguation algorithms had been primarily a matter of intrinsic evaluation, and “almost no attempts had been made to evaluate embedded WSD components”. Only very recently (2006) had extrinsic evaluations begun to provide some evidence for the value of WSD in end-user applications. Until 1990 or so, discussions of the sense disambiguation task focused mainly on illustrative examples rather than comprehensive evaluation. The early 1990s saw the beginnings of more systematic and rigorous intrinsic evaluations, including more formal experimentation on small sets of ambiguous words. === Senseval to SemEval === In April 1997, Martha Palmer and Marc Light organized a workshop entitled Tagging with Lexical Semantics: Why, What, and How? in conjunction with the Conference on Applied Natural Language Processing. At the time, there was a clear recognition that manually annotated corpora had revolutionized other areas of NLP, such as part-of-speech tagging and parsing, and that corpus-driven approaches had the potential to revolutionize automatic semantic analysis as well. Kilgarriff recalled that there was "a high degree of consensus that the field needed evaluation", and several practical proposals by Resnik and Yarowsky kicked off a discussion that led to the creation of the Senseval evaluation exercises. === SemEval's 3, 2 or 1 year(s) cycle === After SemEval-2010, many participants feel that the 3-year cycle is a long wait. Many other shared tasks such as Conference on Natural Language Learning (CoNLL) and Recognizing Textual Entailments (RTE) run annually. For this reason, the SemEval coordinators gave the opportunity for task organizers to choose between a 2-year or a 3-year cycle. The SemEval community favored the 3-year cycle. Although the votes within the SemEval community favored a 3-year cycle, organizers and coordinators had settled to split the SemEval task into 2 evaluation workshops. This was triggered by the introduction of the new SEM conference. The SemEval organizers thought it would be appropriate to associate our event with the SEM conference and collocate the SemEval workshop with the SEM conference. The organizers got very positive responses (from the task coordinators/organizers and participants) about the association with the yearly SEM, and 8 tasks were willing to switch to 2012. Thus was born SemEval-2012 and SemEval-2013. The current plan is to switch to a yearly SemEval schedule to associate it with the SEM conference but not every task needs to run every year. ==== List of Senseval and SemEval Workshops ==== Senseval-1 took place in the summer of 1998 for English, French, and Italian, culminating in a workshop held at Herstmonceux Castle, Sussex, England on September 2–4. Senseval-2 took place in the summer of 2001, and was followed by a workshop held in July 2001 in Toulouse, in conjunction with ACL 2001. Senseval-2 included tasks for Basque, Chinese, Czech, Danish, Dutch, English, Estonian, Italian, Japanese, Korean, Spanish and Swedish. Senseval-3 took place in March–April 2004, followed by a workshop held in July 2004 in Barcelona, in conjunction with ACL 2004. Senseval-3 included 14 different tasks for core word sense disambiguation, as well as identification of semantic roles, multilingual annotations, logic forms, subcategorization acquisition. SemEval-2007 (Senseval-4) took place in 2007, followed by a workshop held in conjunction with ACL in Prague. SemEval-2007 included 18 different tasks targeting the evaluation of systems for the semantic analysis of text. A special issue of Language Resources and Evaluation is devoted to the result. SemEval-2010 took place in 2010, followed by a workshop held in conjunction with ACL in Uppsala. SemEval-2010 included 18 different tasks targeting the evaluation of semantic analysis systems. SemEval-2012 took place in 2012; it was associated with the new SEM, First Joint Conference on Lexical and Computational Semantics, and co-located with NAACL, Montreal, Canada. SemEval-2012 included 8 different tasks targeting at evaluating computational semantic systems. However, there was no WSD task involved in SemEval-2012, the WSD related tasks were scheduled in the upcoming SemEval-2013. SemEval-2013 was associated with NAACL 2013, North American Association of Computational Linguistics, Georgia, USA and took place in 2013. It included 13 different tasks targeting at evaluating computational semantic systems. SemEval-2014 took place in 2014. It was co-located with COLING 2014, 25th International Conference on Computational Linguistics and SEM 2014, Second Joint Conference on Lexical and Computational Semantics, Dublin, Ireland. There were 10 different tasks in SemEval-2014 evaluating various computational semantic systems. SemEval-2015 took place in 2015. It was co-located with NAACL-HLT 2015, 2015 Conference of the North American Chapter of the Association for Computational Linguistics – Human Language Technologies and SEM 2015, Third Joint Conference on Lexical and Computational Semantics, Denver, USA. There were 17 different tasks in SemEval-2015 evaluating various computational semantic systems. == SemEval Workshop framework == The framework of the SemEval/Senseval evaluation workshops emulates the Message Understanding Conferences (MUCs) and other evaluation workshops ran by ARPA (Advanced Research Projects Agency, renamed the Defense Advanced Research Projects Agency (DARPA)). Stages of SemEval/Senseval evaluation workshops Firstly, all likely participants were invited to express their interest and participate in the exercise design. A timetable towards a final workshop was worked out. A plan for selecting evaluation materials was agreed. 'Gold standards' for the individual tasks were acquired, often human annotators were considered as a gold standard to measure precision and recall scores of computer systems. These 'gold standards' are what the computational systems strive towards. In WSD tasks, human annotators were set on the task of generating a set of correct WSD answers (i.e. the correct sense for a given word in a given context) The gold standard materials, without answers, were released to participants, who then had a short time to run their programs over them and return their sets of answers to the organizers. The organizers then scored the answers and the scores were announced and discussed at a workshop. == Semantic evaluation tasks == Senseval-1 & Senseval-2 focused on evaluation WSD systems on major languages that were available corpus and computerized dictionary. Senseval-3 looked beyond the lexemes and started to evaluate systems that looked into wider areas of semantics, such as Semantic Roles (technically known as Theta roles in formal semantics), Logic Form Transformation (commonly semantics of phrases, clauses or sentences were represented
Read more →
Virtual advertising

Virtual advertising is the use of digital technology to insert virtual advertisements into a live or pre-recorded television show, often in sports events. This technique is often used to allow broadcasters to overlay existing physical advertising panels inside the sports venue with virtual content on the screen when broadcasting the same event in multiple regions; a Spanish football game can be broadcast in Mexico with Mexican advertisements. Similarly, virtual content can be inserted onto empty space within the sports venue such as the pitch, where physical advertising cannot be placed due to regulatory or safety reasons. Virtual advertising content is intended to be photorealistic, so that the viewer has the impression they are seeing the real in-stadium advertising. == History == Throughout the 1980s, 1990s, and 2000s, advertising on television and in newspapers was a popular method of spreading information. The marketer Jeremiah Lynwood stated that "Thirty years ago, [U.S.] consumers viewed an average of 560 ads per day", mostly from newspapers, television shows, gasoline pumps, and so on. Lynwood also stated that, at the time, "American consumers may be exposed to 3,000 commercial messages every day". Within that time frame, the exposure of daily ads have supported many local and big businesses. With the arrival of the 2000s and 2010s, technological advances have created new opportunities for many businesses to grow. In the 21st century, virtual advertising has been used to create virtual product placements in television shows hours, days, or years after they have been produced. Advertisements can be targeted to regional markets and updated over time to ensure maximum efficiency of advertising money. A good example of how virtual advertising is used in everyday life is in sports. Virtual advertising uses the latest technology to place an ad in position to the field of play, regardless of camera motion, and the players' movement over the logos. Recently, the NHL have virtually inserted sponsors on the glass above the physical boards in NHL stadiums. Big brands will not spend their time or money on hitting a certain region when their main goal is to build global brand awareness. Digital signage opportunities allow these larger brands to purchase signage in a stadium during games that are instead nationally televised. This gets even more expansive thanks to social media outlets like Twitter, Facebook, and Amazon. On the other hand, local businesses sign when there are smaller games going on. The signage is much more affordable and still reaches a vast number of people. Virtual advertising may even make live attendance more attractive to sport fans because the technology allows the playing field and surrounding areas to be cleared of advertisements while television viewers at home are exposed to commercials. For the most part, virtual advertising makes a live attendance more attractive to sports fans, because instead of being at home watching commercials, live fans are able to be clear of advertisements and enjoy the game without pop-up ads. == Technology == The technology used in virtual insertions often uses automated processes such as: automatic detection of playfield limits, automatic detection of cuts, recognition of playfield surface, recognition of existing logos for logo replacements, etc. An operator is usually dedicated to the visual control of the effect but new systems allow to use the instant replay operator. == Examples == === Live events === Virtual advertisements can be effectively integrated into live television in real-time. For example, Fox Sports Net places a virtual advertisement on the glass behind the goaltender that can only be seen on television. The advertising in the playfields is property of the club, except in some professional sports where the league or federation owns the advertising rights. However, the advertising rights broadcast on the screen are property of the broadcasters or the TV channel. This means that second right holders can benefit from selling this virtual advertising. The number of TV viewers is also higher than the people in the stadium, generating more visibility to the advertised marks and more income to the broadcasters. Virtual advertising was first introduced in football during the 2015 Audi Cup at the Allianz Arena in Munich. AIM Sport implemented the technology to digitally overlay advertisements on the stadium's perimeter boards, allowing different sponsors to be displayed to viewers in different broadcast regions. In Formula One, virtual ads are placed on the grass or as virtual billboards. In baseball, Major League Baseball places virtual advertisements on a back-board behind the batter which can be targeted differently in local markets or countries. During the World Series, MLB international broadcasts of the World Series feature different advertisements on a per market basis, showing a different ad in the US, Canadian, Latin American and Japanese markets. In tennis, e.g. during the 2019 ATP Finals in London's O2 Arena certain logos in the background were replaced for various country feeds. In table tennis e.g. during the ITTF World Tour Australian Open 2019 virtual advertising overlays were used by uniqFEED AG in Switzerland. Since the 2022–23 season, the National Hockey League (NHL) has used digitally enhanced dasherboards (DED) to erase and replace ads on each arena's boards with up to 120 thirty-second segments on all or part of the rink. Each broadcaster can use a different set of ads. DED were first used at the 2016 World Cup of Hockey, which was organized by the NHL. At UEFA Euro 2024, AIM Sport provided virtual advertising for all matches, marking one of the largest implementations of the technology in an international tournament. In addition to the tournament itself, virtual advertising was also used in the participating teams' domestic matches, extending region-specific advertising beyond the competition itself.
Read more →
Scandiweb

scandiweb is a web development, digital strategy, AI consultation & implementation agency specializing in the Magento (Adobe Commerce) platform. The company was established in 2003 in Latvia by Antons Sapriko. It has offices in the United States, Sweden, Latvia, and Georgia. scandiweb provides solutions for primarily eCommerce businesses and acts as a strategic partner for IT development focusing on web, mobile, and big data analysis. T == Partnerships == scandiweb is an official Adobe Gold Partner, with the largest team of Adobe Commerce-certified employees. The company holds the Google Premier Partner status for 2025, placing it among top 3% agencies globally. scandiweb is a BigCommerce Certified Partner and a Pimcore Platinum Partner. Since 2016, scandiweb has been collaborating with Oro, Inc., an open-source business application development firm. scandiweb is a Platinum Partner of Hyvä, working with the Magento 2 frontend theme to optimize performance metrics. The company is also a Sanity Agency Partner, assisting with content management through Sanity’s headless CMS.
Read more →