AI Chatbot No Filter No Limit

AI Chatbot No Filter No Limit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Deep Learning Super Sampling

Deep Learning Super Sampling (DLSS) is a suite of real-time deep learning image enhancement and upscaling technologies developed by Nvidia that are available in a number of video games. The goal of these technologies is to allow the majority of the graphics pipeline to run at a lower resolution for increased performance, and then infer a higher resolution image from this that approximates the same level of detail as if the image had been rendered at this higher resolution. This allows for higher graphical settings or frame rates for a given output resolution, depending on user preference. All generations of DLSS are available on all RTX-branded cards from Nvidia in supported titles. However, the Frame Generation feature is only supported on RTX 40 series GPUs or newer and Multi Frame Generation is only available on 50 series GPUs. == History == Nvidia advertised DLSS as a key feature of GeForce RTX 20 series GPUs when they launched in September 2018. At that time, the results were limited to a few video games, namely Battlefield V, or Metro Exodus, because the algorithm had to be trained specifically on each game on which it was applied and the results were usually not as good as simple resolution upscaling. In 2019, Control shipped with ray tracing and an image processing algorithm that approximated DLSS, which did not use the Tensor Cores. In April 2020, Nvidia advertised and shipped an improved version of DLSS named DLSS 2 with driver version 445.75. DLSS 2.0 was available for a few existing games including Control and Wolfenstein: Youngblood, and would later be added to many newly released games and game engines such as Unreal Engine and Unity. This time Nvidia said that it used the Tensor Cores again, and that the AI did not need to be trained specifically on each game. Despite sharing the DLSS branding, the two iterations of DLSS differ significantly and are not backwards-compatible. In January 2025, Nvidia stated that there are over 540 games and apps supporting DLSS, and that over 80% of Nvidia RTX users activate DLSS. In March 2025, there were more than 100 games that support DLSS 4, according to Nvidia. By May 2025, over 125 games supported DLSS 4. The first video game console to use DLSS, the Nintendo Switch 2, was released on June 5, 2025. Nvidia announced DLSS 4.5 at CES 2026. In January 2026, Nvidia stated that over 250 games and applications support Multi Frame Generation. On March 16, 2026, at GTC 2026, Nvidia CEO Jensen Huang presented DLSS 5, a real-time AI model based on neural rendering that realistically enhances lighting and material surfaces at up to 4K resolution while retaining the developer's intended art style. It is planned to release in fall of 2026. In a blog post on its website, Nvidia has announced that DLSS 5 will be available in such games as Assassin's Creed Shadows, Delta Force, Hogwarts Legacy, Naraka: Bladepoint, Phantom Blade Zero, Resident Evil Requiem, Starfield, The Elder Scrolls IV: Oblivion Remastered, and more. On May 31, 2026, Nvidia announced an updated version of Ray Reconstruction for DLSS 4.5 in a blog post, scheduled for release on all RTX GPUs in August of the same year. They said it is designed to better embed spatial awareness into scenes and analyze engine data on movements and lighting conditions, resulting in a sharper, more stable, and less noisy image. === Release timeline === == Technology == === DLSS 1 === The first iteration of DLSS is a predominantly spatial image upscaler with two stages, both relying on convolutional auto-encoder neural networks. The first step is an image enhancement network which uses the current frame and motion vectors to perform edge enhancement, and spatial anti-aliasing. The second stage is an image upscaling step which uses the single raw, low-resolution frame to upscale the image to the desired output resolution. Using just a single frame for upscaling means the neural network itself must generate a large amount of new information to produce the high-resolution output, which can result in slight hallucinations such as leaves that differ in style to the source content. The neural networks are trained on a per-game basis by generating a "perfect frame" using traditional supersampling to 64 samples per pixel, as well as the motion vectors for each frame. The data collected must be as comprehensive as possible, including as many levels, times of day, graphical settings, resolutions, etc. as possible. This data is also augmented using common augmentations such as rotations, colour changes, and random noise to help generalize the test data. Training is performed on Nvidia's Saturn V supercomputer. This first iteration received a mixed response, with many criticizing the often soft appearance and artifacts along with glitches in certain situations; likely a side effect of the limited data from only using a single frame input to the neural networks which could not be trained to perform optimally in all scenarios and edge-cases. Nvidia also demonstrated the ability for the auto-encoder networks to learn the ability to recreate depth-of-field and motion blur, although this functionality has never been included in a publicly released product. === DLSS 2 === DLSS 2 is a temporal anti-aliasing upsampling (TAAU) implementation, using data from previous frames extensively through sub-pixel jittering to resolve fine detail and reduce aliasing. The data DLSS 2 collects includes: the raw low-resolution input, motion vectors, depth buffers, and exposure / brightness information. It can also be used as a simpler TAA implementation where the image is rendered at 100% resolution, rather than being upsampled by DLSS, Nvidia brands this as DLAA (Deep Learning Anti-Aliasing). TAA(U) is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLSS 2 uses a convolutional auto-encoder neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLSS 2 can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. This is why DLSS 2 can sometimes produce a sharper image than rendering at higher, or even native resolutions using traditional TAA. However, no temporal solution is perfect, and artifacts (ghosting in particular) are still visible in some scenarios when using DLSS 2. Because temporal artifacts occur in most art styles and environments in broadly the same way, the neural network that powers DLSS 2 does not need to be retrained when being used in different games. Despite this, Nvidia does frequently ship new minor revisions of DLSS 2 with new titles, so this could suggest some minor training optimizations may be performed as games are released, although Nvidia does not provide changelogs for these minor revisions to confirm this. The main advancements compared to DLSS 1 include: Significantly improved detail retention, a generalized neural network that does not need to be re-trained per-game, and ~2x less overhead (~1–2 ms vs ~2–4 ms). It should also be noted that forms of TAAU such as DLSS 2 are not upscalers in the same sense as techniques such as ESRGAN or DLSS 1, which attempt to create new information from a low-resolution source; instead, TAAU works to recover data from previous frames, rather than creating new data. In practice, this means low resolution textures in games will still appear low-resolution when using current TAAU techniques. This is why Nvidia recommends game developers use higher resolution textures than they would normally for a given rendering resolution by applying a mip-map bias when DLSS 2 is enabled. === DLSS 3 === Augments DLSS 2 with improved image quality and the introduction of a new motion interpolation feature, called Frame Generation. The DLSS Frame Generation algorithm takes two rendered frames from the rendering pipeline and generates a new frame that smoothly transitions between them. For every frame rendered, one additional frame is generated. DLSS 3.0 makes use of a new generation Optical Flow Accelerator (OFA) included in the Ada Lovelace architecture of GeForce RTX 40 series GPUs and with that is exclusive to them. The new OFA is said to be faster and more accurate than the one already available in previous Turing and Ampere RTX GPUs. === DLSS 3.5 === DLSS 3.5 adds Ray Reconstruction, replacing multiple denoising algorithms with a single AI model trained o
Read more →
Painworth

PainWorth is a justice, legal and insurance services application founded by Canadian entrepreneurs Mike Zouhri, Chris Trudel and Ryan Bencic. The application is a "robot lawyer" that uses artificial intelligence to automate personal injury claims for injury victims. It is currently available in Canada and the United States. PainWorth has been featured by several news outlets, including CTV, Global News, CBC, and has also been featured by the American Bar Association and LexisNexis for its role addressing social issues such as access to justice and other systemic issues in the legal and insurance industry. == Application == PainWorth began as a tool for calculating non-pecuniary damages for injury victims but has since expanded beyond a personal injury calculator to include features that help injury victims and business users with pecuniary damages, economic calculations, prescribed rates and providing informational guides to help navigate settlement negotiation, managing claims records and other issues encountered by self-represented litigants or claims managers. The platform makes use of automation to provide free user-guided calculations, steps and processes to successfully settle an injury claim. The application is supported by Microsoft Azure. == Personal Injury Calculator == PainWorth is the first service to use Artificial Intelligence to interpret case law in order to determine the value of pain and suffering incurred by specific injury types and injury severities. The cited case law is used as evidence and presented in statistical models to determine an accurate valuation compliant with the jurisdiction, regulatory rules and case complexities. == General Damages Calculator == PainWorth also offers a personal injury settlement calculator that assesses general damages based on specific case complexities and jurisdiction. The service takes into account medical complications and recovery in order to calculate the fair valuation. == Injury Settlement Platform == PainWorth insurance settlement platform facilitates a direct and automated way resolution center to settle cases for their assessed value without enduring the hardship of litigation. In 2021, Painworth won the title of World's Best Emerging Insurance Product for the development of this platform. == History == In 2019, Mike Zouhri was struck by a drunk driver which left him seriously injured and resulted in a lawsuit. Frustrated by the slow and expensive process, Zouhri went down to the law library and learned how to manage injury claims. After learning the process, he partnered lawyers and legal advisors to create an app to allow users to quickly settle their own injury claims fairly and accurately. Immediately after its launch, PainWorth quickly became widely used by thousands of users and gained significant media coverage. Global News reported that the bot had successfully helped people with more than $10 million in claims in only a few short months, all free of charge. In July 2020, PainWorth began raising concern over injustices and gender bias in the legal system. in Canadian courts.
Read more →
Type-1 OWA operators

Type-1 OWA operators are a set of aggregation operators that generalise the Yager's OWA (ordered weighted averaging) operators in the interest of aggregating fuzzy sets rather than crisp values in soft decision making and data mining. These operators provide a mathematical technique for directly aggregating uncertain information with uncertain weights via OWA mechanism in soft decision making and data mining, where these uncertain objects are modelled by fuzzy sets. The two definitions for type-1 OWA operators are based on Zadeh's Extension Principle and α {\displaystyle \alpha } -cuts of fuzzy sets. The two definitions lead to equivalent results. == Definitions == === Definition 1 === Let F ( X ) {\displaystyle F(X)} be the set of fuzzy sets with domain of discourse X {\displaystyle X} , a type-1 OWA operator is defined as follows: Given n linguistic weights { W i } i = 1 n {\displaystyle \left\{{W^{i}}\right\}_{i=1}^{n}} in the form of fuzzy sets defined on the domain of discourse U = [ 0 , 1 ] {\displaystyle U=[0,1]} , a type-1 OWA operator is a mapping, Φ {\displaystyle \Phi } , Φ : F ( X ) × ⋯ × F ( X ) ⟶ F ( X ) {\displaystyle \Phi \colon F(X)\times \cdots \times F(X)\longrightarrow F(X)} ( A 1 , ⋯ , A n ) ↦ Y {\displaystyle (A^{1},\cdots ,A^{n})\mapsto Y} such that μ Y ( y ) = sup ∑ k = 1 n w ¯ i a σ ( i ) = y ( μ W 1 ( w 1 ) ∧ ⋯ ∧ μ W n ( w n ) ∧ μ A 1 ( a 1 ) ∧ ⋯ ∧ μ A n ( a n ) ) {\displaystyle \mu _{Y}(y)=\displaystyle \sup _{\displaystyle \sum _{k=1}^{n}{\bar {w}}_{i}a_{\sigma (i)}=y}\left({\begin{array}{{1}l}\mu _{W^{1}}(w_{1})\wedge \cdots \wedge \mu _{W^{n}}(w_{n})\wedge \mu _{A^{1}}(a_{1})\wedge \cdots \wedge \mu _{A^{n}}(a_{n})\end{array}}\right)} where w ¯ i = w i ∑ i = 1 n w i {\displaystyle {\bar {w}}_{i}={\frac {w_{i}}{\sum _{i=1}^{n}{w_{i}}}}} , and σ : { 1 , ⋯ , n } ⟶ { 1 , ⋯ , n } {\displaystyle \sigma \colon \{1,\cdots ,n\}\longrightarrow \{1,\cdots ,n\}} is a permutation function such that a σ ( i ) ≥ a σ ( i + 1 ) , ∀ i = 1 , ⋯ , n − 1 {\displaystyle a_{\sigma (i)}\geq a_{\sigma (i+1)},\ \forall i=1,\cdots ,n-1} , i.e., a σ ( i ) {\displaystyle a_{\sigma (i)}} is the i {\displaystyle i} th highest element in the set { a 1 , ⋯ , a n } {\displaystyle \left\{{a_{1},\cdots ,a_{n}}\right\}} . === Definition 2 === Using the alpha-cuts of fuzzy sets: Given the n linguistic weights { W i } i = 1 n {\displaystyle \left\{{W^{i}}\right\}_{i=1}^{n}} in the form of fuzzy sets defined on the domain of discourse U = [ 0 , 1 ] {\displaystyle U=[0,\;\;1]} , then for each α ∈ [ 0 , 1 ] {\displaystyle \alpha \in [0,\;1]} , an α {\displaystyle \alpha } -level type-1 OWA operator with α {\displaystyle \alpha } -level sets { W α i } i = 1 n {\displaystyle \left\{{W_{\alpha }^{i}}\right\}_{i=1}^{n}} to aggregate the α {\displaystyle \alpha } -cuts of fuzzy sets { A i } i = 1 n {\displaystyle \left\{{A^{i}}\right\}_{i=1}^{n}} is: Φ α ( A α 1 , … , A α n ) = { ∑ i = 1 n w i a σ ( i ) ∑ i = 1 n w i | w i ∈ W α i , a i ∈ A α i , i = 1 , … , n } {\displaystyle \Phi _{\alpha }\left({A_{\alpha }^{1},\ldots ,A_{\alpha }^{n}}\right)=\left\{{{\frac {\sum \limits _{i=1}^{n}{w_{i}a_{\sigma (i)}}}{\sum \limits _{i=1}^{n}{w_{i}}}}\left|{w_{i}\in W_{\alpha }^{i},\;a_{i}}\right.\in A_{\alpha }^{i},\;i=1,\ldots ,n}\right\}} where W α i = { w | μ W i ( w ) ≥ α } , A α i = { x | μ A i ( x ) ≥ α } {\displaystyle W_{\alpha }^{i}=\{w|\mu _{W_{i}}(w)\geq \alpha \},A_{\alpha }^{i}=\{x|\mu _{A_{i}}(x)\geq \alpha \}} , and σ : { 1 , ⋯ , n } → { 1 , ⋯ , n } {\displaystyle \sigma :\{\;1,\cdots ,n\;\}\to \{\;1,\cdots ,n\;\}} is a permutation function such that a σ ( i ) ≥ a σ ( i + 1 ) , ∀ i = 1 , ⋯ , n − 1 {\displaystyle a_{\sigma (i)}\geq a_{\sigma (i+1)},\;\forall \;i=1,\cdots ,n-1} , i.e., a σ ( i ) {\displaystyle a_{\sigma (i)}} is the i {\displaystyle i} th largest element in the set { a 1 , ⋯ , a n } {\displaystyle \left\{{a_{1},\cdots ,a_{n}}\right\}} . == Representation theorem of Type-1 OWA operators == Given the n linguistic weights { W i } i = 1 n {\displaystyle \left\{{W^{i}}\right\}_{i=1}^{n}} in the form of fuzzy sets defined on the domain of discourse U = [ 0 , 1 ] {\displaystyle U=[0,\;\;1]} , and the fuzzy sets A 1 , ⋯ , A n {\displaystyle A^{1},\cdots ,A^{n}} , then we have that Y = G {\displaystyle Y=G} where Y {\displaystyle Y} is the aggregation result obtained by Definition 1, and G {\displaystyle G} is the result obtained by in Definition 2. == Programming problems for Type-1 OWA operators == According to the Representation Theorem of Type-1 OWA Operators, a general type-1 OWA operator can be decomposed into a series of α {\displaystyle \alpha } -level type-1 OWA operators. In practice, this series of α {\displaystyle \alpha } -level type-1 OWA operators is used to construct the resulting aggregation fuzzy set. So we only need to compute the left end-points and right end-points of the intervals Φ α ( A α 1 , ⋯ , A α n ) {\displaystyle \Phi _{\alpha }\left({A_{\alpha }^{1},\cdots ,A_{\alpha }^{n}}\right)} . Then, the resulting aggregation fuzzy set is constructed with the membership function as follows: μ G ( x ) = ⋁ α : x ∈ Φ α ( A α 1 , ⋯ , A α n ) α ⁡ α {\displaystyle \mu _{G}(x)=\operatorname {\bigvee } \limits _{\alpha :x\in \Phi _{\alpha }\left({A_{\alpha }^{1},\cdots ,A_{\alpha }^{n}}\right)_{\alpha }}\alpha } For the left end-points, we need to solve the following programming problem: Φ α ( A α 1 , ⋯ , A α n ) − = min W α − i ≤ w i ≤ W α + i A α − i ≤ a i ≤ A α + i ⁡ ∑ i = 1 n w i a σ ( i ) / ∑ i = 1 n w i {\displaystyle \Phi _{\alpha }\left({A_{\alpha }^{1},\cdots ,A_{\alpha }^{n}}\right)_{-}=\operatorname {\min } \limits _{\begin{array}{l}W_{\alpha -}^{i}\leq w_{i}\leq W_{\alpha +}^{i}A_{\alpha -}^{i}\leq a_{i}\leq A_{\alpha +}^{i}\end{array}}\sum \limits _{i=1}^{n}{w_{i}a_{\sigma (i)}/\sum \limits _{i=1}^{n}{w_{i}}}} while for the right end-points, we need to solve the following programming problem: Φ α ( A α 1 , ⋯ , A α n ) + = max W α − i ≤ w i ≤ W α + i A α − i ≤ a i ≤ A α + i ⁡ ∑ i = 1 n w i a σ ( i ) / ∑ i = 1 n w i {\displaystyle \Phi _{\alpha }\left({A_{\alpha }^{1},\cdots ,A_{\alpha }^{n}}\right)_{+}=\operatorname {\max } \limits _{\begin{array}{l}W_{\alpha -}^{i}\leq w_{i}\leq W_{\alpha +}^{i}A_{\alpha -}^{i}\leq a_{i}\leq A_{\alpha +}^{i}\end{array}}\sum \limits _{i=1}^{n}{w_{i}a_{\sigma (i)}/\sum \limits _{i=1}^{n}{w_{i}}}} A fast method has been presented to solve two programming problem so that the type-1 OWA aggregation operation can be performed efficiently, for details, please see the paper. == Alpha-level approach to Type-1 OWA operation == Three-step process: Step 1—To set up the α {\displaystyle \alpha } - level resolution in [0, 1]. Step 2—For each α ∈ [ 0 , 1 ] {\displaystyle \alpha \in [0,1]} , Step 2.1—To calculate ρ α + i 0 ∗ {\displaystyle \rho _{\alpha +}^{i_{0}^{\ast }}} Let i 0 = 1 {\displaystyle i_{0}=1} ; If ρ α + i 0 ≥ A α + σ ( i 0 ) {\displaystyle \rho _{\alpha +}^{i_{0}}\geq A_{\alpha +}^{\sigma (i_{0})}} , stop, ρ α + i 0 {\displaystyle \rho _{\alpha +}^{i_{0}}} is the solution; otherwise go to Step 2.1-3. i 0 ← i 0 + 1 {\displaystyle i_{0}\leftarrow i_{0}+1} , go to Step 2.1-2. Step 2.2 To calculate ρ α − i 0 ∗ {\displaystyle \rho _{\alpha -}^{i_{0}^{\ast }}} Let i 0 = 1 {\displaystyle i_{0}=1} ; If ρ α − i 0 ≥ A α − σ ( i 0 ) {\displaystyle \rho _{\alpha -}^{i_{0}}\geq A_{\alpha -}^{\sigma (i_{0})}} , stop, ρ α − i 0 {\displaystyle \rho _{\alpha -}^{i_{0}}} is the solution; otherwise go to Step 2.2-3. i 0 ← i 0 + 1 {\displaystyle i_{0}\leftarrow i_{0}+1} , go to step Step 2.2-2. Step 3—To construct the aggregation resulting fuzzy set G {\displaystyle G} based on all the available intervals [ ρ α − i 0 ∗ , ρ α + i 0 ∗ ] {\displaystyle \left[{\rho _{\alpha -}^{i_{0}^{\ast }},\;\rho _{\alpha +}^{i_{0}^{\ast }}}\right]} : μ G ( x ) = ⋁ α : x ∈ [ ρ α − i 0 ∗ , ρ α + i 0 ∗ ] ⁡ α {\displaystyle \mu _{G}(x)=\operatorname {\bigvee } \limits _{\alpha :x\in \left[{\rho _{\alpha -}^{i_{0}^{\ast }},\;\rho _{\alpha +}^{i_{0}^{\ast }}}\right]}\alpha } == Some Examples == The type-1 OWA operator with the weights shown in the top figure is used to aggregate the fuzzy sets (solide lines) in the bottom figure, and the dashed line is the aggregation result. == Special cases == Any OWA operators, like maximum, minimum, mean operators; Join operators of (type-1) fuzzy sets, i.e., fuzzy maximum operators; Meet operators of (type-1) fuzzy sets, i.e., fuzzy minimum operators; Join-like operators of (type-1) fuzzy sets; Meet-like operators of (type-1) fuzzy sets. == Generalizations == Type-2 OWA operators have been suggested to aggregate the type-2 fuzzy sets for soft decision making. == Applications == Type-1 OWA operators have been applied to different domains for soft decision making. Improved efficiency of computing approach ; Type reduction of type-2 fuzzy sets ; Group decision making ; Credit risk evaluation ; Information fusion ; Linguistic expressions and symbolic translation ; Sentiment analysis ; Ro
Read more →
Big Mechanism

Big Mechanism is a $45 million DARPA research program, begun in 2014, aimed at developing software that will read cancer research papers, integrate them into a cancer model and frame new hypotheses by the end of 2017 through the automated collection of big data and integrating across various disciplines such as knowledge-based NLP, curation and ontology, systems and mathematical biology by reading research abstracts and papers to extract pieces of causal mechanisms. == Ras gene == The program focuses on mutations in the Ras gene family, which underlie some one-third of human cancers. Currently, a rough road map shows interaction sequences among proteins affecting cell replication and death. However, the causal relations are poorly understood. == Plan == The program is to occur in three stages. The first is to read literature and convert it into formal representations. Second is to integrate the knowledge into computational models. Third is to produce experimentally testable explanations and predictions. Research teams are developing four separate systems targeting all three tasks. In February 2015, an evaluation meeting reviewed progress on the first stage. Multiple tasks were considered. One was extraction of experimental procedure details and evaluating statements such as "we demonstrate" and "we suggest." Another worked to map sentence meaning and relationships. The best machine-reading system extracted 40% of relevant information from a small corpus and correctly determined how each passage related to the model. The second stage is to become active in summer 2015, when members attempt to produce a single reference model. The third stage is the most challenging, because the artificial intelligence community has had limited success at developing hypothesis generators. Molecular biology may be more amenable, because most domain knowledge is technical and available in written form.
Read more →
Something Big Is Happening

"Something Big Is Happening" is an essay by Matt Shumer, an AI entrepreneur, about the impact of artificial intelligence, published in February 2026, that has since been reportedly viewed more than 80 million times and widely discussed. Shumer noted that the technology has crossed an important threshold, where AI has become capable of creating self-improving systems. Referring to one the most recent AI models, he wrote: "It was making intelligent decisions. It had something that felt, for the first time, like judgment. Like taste." Speaking to CNBC's Power Lunch, Shumer said that his "core message" is "people in the workforce should start to use and experiment with AI tools so they can understand what’s coming". Even as the essay was widely shared and discussed, the essay also elicited criticism. Paulo Carvao, in an essay published by the Forbes Magazine stated that some of his advice is sound, but added: "It reads at times like a sales pitch. He urges readers to subscribe to the most advanced AI tools. He implies that those with access to premium models will outpace those without. He frames paid AI subscriptions as a form of insurance against obsolescence." Writing in The Guardian, Dan Milmo and Aisha Down mentioned Shumer as having a history of AI hype and stated, "He previously excited the internet by announcing the release of the world's "top open-source model", which it was not". Many workers in the technology sector criticized the article in blog posts shared on Hacker News; Edward Zitron commented that "while coding LLMs can test products, or scan/fix some bugs, this suggests they A) do this autonomously without human input, B) they do this correctly every time (or ever!)." In an article alluding to Shumer's original post, Ari Colaprete wrote "the LLM is fundamentally a writing machine, it does everything via text, and if you make it produce writing that exists purely to serve some sort of mechanical function, and you train it to succeed in that task, then it will tend to do so, even with vast intricacy."
Read more →
Overwatch

Overwatch (abbreviated as OW) is a multimedia franchise centered on a series of multiplayer first-person shooter (FPS) video games developed by Blizzard Entertainment. Overwatch was released in 2016. Overwatch 2 was released in 2022 and the original game was taken offline upon its release, though Blizzard renamed it back to Overwatch in 2026. Overwatch features hero-based combat between two teams of players fighting over various objectives, along with other traditional gameplay modes. Released in 2016, Overwatch lacked a traditional story mode. Instead, Blizzard employed a transmedia storytelling strategy to disseminate lore regarding the game's characters, releasing comics and other literary media, as well as animated media that includes short films. The game enjoyed both critical and commercial success, and garnered a devoted following. The fan community around the franchise has produced a large amount of content including art, cosplay, fan fiction, anime-influenced music videos, Internet memes, and pornography. Blizzard helped launch and promote an esports scene surrounding the game, including an annual Overwatch World Cup, Overwatch League a minor league, and the Overwatch Champions Series which borrowed elements found in traditional American sports leagues. == Gameplay == Both games in the Overwatch series are team-based hero shooters. Players select a hero character from a large roster (52 as of Season 2), divided among three class types. These are: Tanks, who have higher health and generally meant to help protect their teammates from damage, but are larger and easier to hit; Damage, who act as the team's offensive leads; and Support, who heal, provide buffs for teammates, or de-buff the opposing team. Each role also features sub-roles with extra passives. These sub-roles include 'Initiator', 'Stalwart', and 'Bruiser' for Tank. 'Specialist', 'Flanker', 'Recon', and 'Sharpshooter' for Damage. 'Medic', 'Tactician', and 'Survivor' for Support. Players are generally free to change to different heroes while inside their spawn room during the course of a match in response to the current tactics employed by other players. As of the development of Overwatch 2, a standard game features one tank player, two damage players and two support players, a change from having two of each class in its predecessor. Players choose their class before the match, and can only pick characters within that class for the duration of the game. There are different styles of game modes, however, that allow players to choose characters from any class throughout the game. Each hero has a skill kit that includes a primary attack, active skills that require a cooldown period before they can be used again, passive skills that remain active at all times, and an Ultimate skill that can only be used once they fill their Ultimate meter either by damaging opponents, mitigating damage, healing teammates or by passively generating it over time. An update in 2025 saw each hero receive a total of four unique abilities known as perks. Each hero has two minor and two major perks; minor perks consist of smaller changes to a hero's kit, while major perks are intended to affect the match more significantly. At the beginning of each match, all heroes are set to level 1 for each player. As the match progresses, players can individually level up their respective heroes, minor perks are unlocked at level 2, and major perks are unlocked at the maximum level 3. When perks become available, players may only select one of each type of perk; a selected perk becomes irreversibly attached to the current hero for the remainder of the match. If a player switches to another hero mid-match, the previously selected hero retains their level and perk progress. Game types of Overwatch are split between standard matches, competitive play, custom games, and arcade modes. Standard matches have matchmaking based loosely on the player's skill level as measured by the game. Competitive mode uses more strict matchmaking based on a player's current rank on the competitive ladder, with their rank increasing or decreasing when they win or lose a game, respectively. Arcade modes do not use matchmaking and are generally more experimental modes compared to standard and competitive modes. Custom games are created via the workshop and can be utilised to make game modes that are very different from the base game. The workshop, is the software in Overwatch which creates the game using either presets and settings or rules and conditions made by code. These game modes can be published directly onto Overwatch’s custom browse tab or shared off platform using a 5 digit alphanumeric code. Standard and competitive game modes are randomly selected at the start of each match, and are objective based, requiring teams to control a fixed objective point for a duration of time, or escort a payload to a target zone before match time expires. These modes include: Assault (introduced in Overwatch): Also known as 2 Capture Points (or 2CP), Assault has the attacking team tasked with capturing two target points in sequence on the map, while the defending team must stop them. Assault-style maps were removed from main gameplay rotation after Overwatch 2 released but available in the game's arcade mode. It is still available in the game's custom game modes. Since Season 2, Assault-style maps are available in Arcade Mode daily routines. Escort (introduced in Overwatch): Also known as "Payload" by the community, The attacking team is tasked with escorting a payload to a certain delivery point before time runs out, while the defending team must stop them. The payload vehicle moves along a fixed track when any player on the attacking team is close to it, increasing in speed if multiple attackers are present, the increase capping at 3, but will stop if a defending player is nearby; should no attacker be near the vehicle, it will start to move backwards along the track. The payload will also heal any attacking players by 10 health per second while they are near the payload. Passing specific checkpoints will extend the match time and prevent the payload from moving backwards from that point. Hybrid (Assault/Escort) (introduced in Overwatch): The attacking team has to capture the payload (as if it were a target point from Assault) and escort it to its destination, while the defending team tries to hold them back. Control (introduced in Overwatch): Each team tries to capture and maintain a common control point until their capture percentage reaches 100%. This game mode is played in a best-of-three format. Control maps are laid out in a symmetric fashion so no team has an intrinsic position advantage. Push (introduced in Overwatch 2's launch): Each team attempts to secure control of a large robot that pushes one of two barriers to the opposing team's side of the map, whilst being escorted by at least one team member, stopping when enemy players are nearby, similar to the payload movement system in Escort. The team that pushes the payload fully to the other side, or furthest into the enemy territory before the time runs out, wins the match. Flashpoint (introduced in Overwatch 2 in 2023): Similar to Control, each team attempts to capture and maintain a common control point until their capture percentage reaches 100%. This game mode takes place on significantly larger maps with five separate control points, which take a shorter amount of time to capture as compared to a standard Control map. A central control point is always activated first; after it is secured by one team, the remaining four are activated in a random order. The first team to secure three control points wins. Clash (introduced in Overwatch 2 in 2024): Clash maps feature symmetrical maps with five control points. Teams initially vie for control of the central point, with the winning team progressing to the next control point, towards the opponent's base. Opponents can push back by winning control points and shifting the next point away from their base. If a team captures the point closest to the opponent's base, they win. Otherwise the match plays out until one team wins control five times. Arcade modes may include variations of the above modes with experimental rules, and can also include modes like Deathmatch and Capture the Flag. Other common arcade modes include: Elimination (introduced in Overwatch in 2016): Two teams face off in a series of rounds, attempting to wipe out the other team; once a player is killed they remain out of the game until the next round, though they can be revived by Mercy's 'Resurrect' ability. If no team has won a round by a certain time, then the winners are decided by the team that can first take a neutral control point. Players cannot change heroes until the next round. Some of these can be played in "lockout" mode, in which the heroes selected by the winning team for a round are "locked" and cannot be selected in future rounds. Total Mayhem (i
Read more →
Blended artificial intelligence

Blended artificial intelligence (blended AI) refers to the blending of different artificial intelligence techniques or approaches to achieve more robust and practical solutions. It involves integrating multiple AI models, algorithms, and technologies to leverage their respective strengths and compensate for their weaknesses. == Background == In the context of machine learning, blended AI can involve using different types of models, such as generative AI, decision trees, neural networks, and support vector machines. By combining their results, predictions are more accurate and reliable. This blending of models can be done through techniques like ensemble learning, where multiple models are trained independently and their predictions are combined to make a final decision. Blended AI can also involve combining different AI techniques or technologies, such as natural language processing, computer vision, and expert systems, to tackle complex problems that require a multi-dimensional approach. For example, in a sales scenario AI could be used for lead generation and gathering information from social media such as LinkedIn posts, or understanding a prospect's hobbies and interests. Another blended AI could achieve customer profiling including past interactions and purchasing habits, by them, their industry and growth areas. Blended AI could be used to do predictive analytics to look at historical sales data, market trends, and external factors to generate accurate sales forecasts. This method is critical to gauge and increase "efficiency, revenue, and productivity". Lastly, another could integrate all the information into the CRM to build and maintain better prospect and customer profiles. Blended AI aims to leverage the strengths of different AI techniques and technologies, allowing them to complement each other and create more powerful and comprehensive AI solutions. By combining multiple approaches, blended AI aims to achieve better performance, higher accuracy, improved robustness, and enhanced capabilities in solving diverse and challenging problems.
Read more →
Polyworld

Polyworld is a cross-platform (Linux, Mac OS X) program written by Larry Yaeger to evolve Artificial Intelligence through natural selection and evolutionary algorithms. It uses the Qt graphics toolkit and OpenGL to display a graphical environment in which a population of trapezoid agents search for food, mate, have offspring, and prey on each other. The population is typically only in the hundreds, as each individual is rather complex and the environment consumes considerable computer resources. The graphical environment is necessary since the individuals actually move around the 2-D plane and must be able to "see." Since some basic abilities, like eating carcasses or randomly generated food, seeing other individuals, mating or fighting with them, etc., are possible, a number of interesting behaviours have been observed to spontaneously arise after prolonged evolution, such as cannibalism, predators and prey, and mimicry. Each individual makes decisions based on a neural net using Hebbian learning; the neural net is derived from each individual's genome. The genome does not merely specify the wiring of the neural nets, but also determines their size, speed, color, mutation rate and a number of other factors. The genome is randomly mutated at a set probability, which are also changed in descendant organisms.
Read more →
Meesho

Meesho Limited (short for Meri shop, transl. My shop) is an Indian e-commerce company, headquartered in Bengaluru. Founded by Vidit Aatrey and Sanjeev Barnwal in December 2015, Meesho is an online marketplace in categories such as fashion, home and kitchen, beauty and personal care, electronics accessories, and daily use products. == History == Meesho Private Limited, formerly Fashnear Technologies Private Limited, was established by IIT Delhi graduates Vidit Aatrey and Sanjeev Barnwal in December, 2015 In 2016, the founders came up with the idea of re-establishing the platform as Meesho, one that would enable country-wide shipping for resellers with the use of social media sites as tools for marketing. In February 2019, the platform reported having around 209,000 users and about 1.2 million monthly orders, and in March 2020, it reported approximately 563,000 users and 3.1 million monthly orders. In 2021, the Meesho mobile application was ranked among the most downloaded shopping apps globally. In 2022, Meesho had about 120 million monthly users and about 910 million orders were made through the platform, with a gross merchandise value (GMV) of about $5 billion. According to report as of August 2023 Meesho delisted 42 lakh counterfeit listings and 10 lakh restricted products under its initiative Project Suraksha. During the same period, the platform blocked access for over 12,000 user accounts flagged for policy violations. The Court granted injunctive relief by directing domain registrars to suspend the infringing websites. Additionally, the Court ordered law enforcement authorities to initiate criminal investigations, freeze associated financial accounts against the identified offenders. In 2023, Meesho became the fastest shopping app to cross over 500 million downloads. In 2024, Meesho introduced Valmo, a logistics marketplace, to provide shipment services to sellers by aggregating multiple logistics providers. Meesho employs over 3,000 small businesses and 10-12 large firms for warehousing and sorting operations within its logistics framework. According to media reports, Valmo operating in approximately 15,000 pincodes in India with around 6,000 partners. It is reported to handle over 50% of Meesho's daily orders. In November 2024, Meesho introduced a generative AI-powered voice bot for customer support, managing approximately 60,000 calls daily in English and Hindi. According to media reports, the system resolves the majority of queries without human assistance, with only a small fraction of calls requiring manual intervention. According to media reports, in 2024, Meesho prevented over 22 million suspicious or potentially fraudulent transactions on its platform. The company initiated legal proceedings, resulting in the filing of twelve cases, including nine specifically targeting over forty individuals in the cities of Kolkata and Ranchi. The company filed a suit in the Delhi High Court for a permanent injunction against parties operating deceptive websites misappropriating its brand identity. Meesha went public through an initial public offering in December 2025, raising $603 million. It is listed on both the BSE and NSE. == Recognition == In 2023, Meesho was named one of the most influential companies of the year by Time (magazine).
Read more →
Federation of International Robot-soccer Association

The Federation of International Robot-soccer Association (FIRA) is an international organisation organising competitive soccer competitions between autonomous robots. The matches are usually five-a-side. == History == In 1996 and 1997, this competition was known as MiroSot and was held in Daejeon, Korea. The 1996 competition offered a challenging arena to the younger generation and researchers working with autonomous mobile robotic systems. From 1998 through 2008, it was called the FIRA Cup, and in 2009, it became the FIRA RoboWorld Cup & Congress. The 15th RoboWorld Cup was held at Amrita Vishwa Vidyapeetham, Bangalore, India in September 2010. In 2013, it took place in Kuala Lumpur, Malaysia. The championship started on August 24, 2013, and ended on August 29. At that time, it involved five categories: Micro-Robot Soccer Tournament, Amire, Naro, Simulated Robot, Android, Robo and Humanoid Robot. It attracted teams from Singapore, Indonesia, Taiwan, India, China, South Korea, the United Kingdom, Mexico, Canada, Russia and Malaysia. 80 teams from 11 countries participated. In 2018, the competition had 277 teams participating from 12 countries. === Past Events === == FIRA RoboWorld Cup & Congress == This competition has 4 leagues: FIRA AIR, FIRA Sports, FIRA Challenges, and FIRA Youth. Each league has its own competitions, and each competition can have several events. === FIRA AIR === The FIRA AIR league has two associated competitions, Autonomous Race and Emergency Service. === FIRA Sports === The FIRA Sports league has four associated competitions, HuroCup, RoboSot, SimuroSot, and AndroSot. This the robot soccer league. HuroCup consists of single events for bipedal humanoid robots. The events are: archery, sprint, marathon, united soccer, obstacle run, long jump, spartan race, marathon, weightlifting, and basketball. There is an all-round competition for the single robot that performs the best overall. === FIRA Challenges === The FIRA Challenges league has three associated competitions, Autonomous Cars, Autonomous Cars Simulation, Innovation and Business. === FIRA Youth === The FIRA Youth league has six associated challenges, Sport Robots, HuroCup Junior, CityRacer, DRV_Explorer, Cliff Hanger, and Mission Impossible.
Read more →
Darwin among the Machines

"Darwin among the Machines" is a letter to the editor published in The Press newspaper on 13 June 1863 in Christchurch, New Zealand. The title, which was chosen by the author, references the work of Charles Darwin. Written by Samuel Butler but signed Cellarius, the letter raised the possibility that machines were a kind of "mechanical life" undergoing constant evolution, and that eventually machines might supplant humans as the dominant species. == Book of the Machines == Butler developed this and subsequent articles into The Book of the Machines, three chapters of Erewhon, published anonymously in 1872. The Erewhonian society Butler envisioned had long ago undergone a revolution that destroyed most mechanical inventions. The narrator of the story finds a book that details the reasons for this revolution, which he translates for the reader. Despite the initial popularity of Erewhon, Butler commented in the preface to the second edition that reviewers had "in some cases been inclined to treat the chapters on Machines as an attempt to reduce Mr. Darwin's theory to an absurdity." He protested that "few things would be more distasteful to me than any attempt to laugh at Mr. Darwin", but also added "I am surprised, however, that the book at which such an example of the specious misuse of analogy would seem most naturally levelled should have occurred to no reviewer; neither shall I mention the name of the book here, though I should fancy that the hint given will suffice", which may suggest that the chapter on Machines was in fact a satire intended to illustrate the "specious misuse of analogy", even if the target was not Darwin; Butler, fearing that he had offended Darwin, wrote him a letter explaining that the actual target was Joseph Butler's 1736 The Analogy of Religion, Natural and Revealed, to the Constitution and Course of Nature. The Victorian scholar Herbert Sussman has suggested that although Butler's exploration of machine evolution was intended to be whimsical, he may also have been genuinely interested in the notion that living organisms are a type of mechanism and was exploring this notion with his writings on machines, while the philosopher Louis Flaccus called it "a mixture of fun, satire, and thoughtful speculation." == Evolution of Global Intelligence == George Dyson applies Butler's original premise to the artificial life and intelligence of Alan Turing in Darwin Among the Machines: The Evolution of Global Intelligence (1998) ISBN 0-7382-0030-1, to suggest that the internet is a living, sentient being. Dyson's main claim is that the evolution of a conscious mind from today's technology is inevitable. It is not clear whether this will be a single mind or multiple minds, how smart that mind would be, and even if we will be able to communicate with it. He also clearly suggests that there are forms of intelligence on Earth that we are currently unable to understand. From the book: "What mind, if any, will become apprehensive of the great coiling of ideas now under way is not a meaningless question, but it is still too early in the game to expect an answer that is meaningful to us."
Read more →
Torment: Tides of Numenera

Torment: Tides of Numenera is a 2017 role-playing video game developed by inXile Entertainment and published by Techland Publishing for Microsoft Windows, macOS, Linux, PlayStation 4 and Xbox One. It is a spiritual successor to 1999's Planescape: Torment. The game takes place in The Ninth World, a science fantasy campaign setting written by Monte Cook for his tabletop RPG Numenera. Torment: Tides of Numenera, like its predecessor, is primarily story-driven while placing greater emphasis on interaction with the world and characters, with combat and item accumulation taking a secondary role. The game was crowd-funded through Kickstarter in March 2013. At the campaign's conclusion, Torment: Tides of Numenera had set the record for highest-funded video game on Kickstarter with over US$4 million pledged. The release date was initially set for December 2014, but was pushed back to February 2017. == Gameplay == Torment: Tides of Numenera uses the Unity engine to display the pre-rendered 2.5D isometric perspective environments. The tabletop ruleset of Monte Cook's Numenera has been adapted to serve as the game's rule mechanic, and its Ninth World setting is where the events of Torment: Tides of Numenera take place. The player experiences the game from the point of view of the Last Castoff, a human host that was once inhabited by a powerful being, but was suddenly abandoned without memory of prior events. As with its spiritual predecessor, Planescape: Torment, the gameplay of Torment: Tides of Numenera places a large emphasis on storytelling, which unfolds through a "rich, personal narrative", and complex character interaction through the familiar dialog tree system. The player is able to select the gender of the protagonist, who will otherwise start the game as a "blank slate", and may develop his or her skills and personality from their interactions with the world. The Numenera setting provides three base character classes: Glaive (warrior), Nano (wizard) and Jack (rogue). These classes can be further customized with a number of descriptors (such as "Tough" or "Mystical") and foci, which allow the character to excel in a certain role or combat style. Instead of a classic alignment system acting as a character's ethical and moral compass, Torment: Tides of Numenera uses "Tides" to represent the reactions a person inspires in their peers. Each Tide has a specific color and embodies a number of nuanced concepts that are associated with it. The composition of Tides a character has manipulated the most determines their Legacy, which roughly describes the way they have taken in life. Different Legacies may affect what bonuses and powers certain weapons and relics provide, as well as give a character special abilities and enhance certain skills. == Synopsis == === Setting === Tides of Numenera has a science fantasy setting. In the far future (one billion years), the rise and fall of countless civilizations have left Earth in a roughly medieval state, with most of humanity living in simple settlements, surrounded by technological relics of the mysterious past. The current age is called the "Ninth World" by its scholars, who believe that eight great ages existed and were destroyed, disappeared or left the Earth for unknown reasons before the present day, leaving ruins and various oddities and artifacts behind. These artifacts are known as the "numenera" and represent what is left of the science and technology of these past civilizations. Many of them are irreparably broken, but some are still able to function in ways that are beyond the level of understanding of most humans, who believe these objects to be magical in nature. === Characters === Character complexity and dialogue depth were identified among the primary elements of the Planescape: Torment legacy to be preserved and refined by the developers of Torment: Tides of Numenera. The tormented nature of the game's protagonist, the Last Castoff, attracts other, similarly affected people. They will play a significant role in his or her story as friends and companions, or as powerful enemies. The game contains seven companions in total: Aligern, Callistege, Erritis, Matkina, Oom, Tybir, and Rhin. === Plot === The protagonist of the story, known as the Last Castoff, is the final vessel for the consciousness of an ancient man, who managed to find a way to leave his physical body and be reborn in a new one, thus achieving a kind of immortality by means of the relics. The actions of this man, known as the Changing God to some, attracted the enmity of "The Sorrow" (renamed from "The Angel of Entropy" to reduce the potential to imply a religious role), who now seeks to destroy him and his creations. The Last Castoff, being one such "creation", is also targeted by the Sorrow, and must find their master before both are undone. To do so, the protagonist must explore the Ninth World, discovering other castoffs, making friends and enemies along the way. One means of such exploration are the "Meres" – artifacts that let their user gain control over the lives of other castoffs, and experience different worlds or dimensions through them. Through these travels the Last Castoff will leave their mark on the world – their Legacy – and will find an answer to the fundamental question of the story: What does one life matter? While the overall story varies wildly depending on personal preferences and specific interactions, the central storyline follows the Last Castoff as they search for a way to defeat or escape the Sorrow. They explore Sagus Cliffs after falling from a great height into a domed structure, destroying an artifact known as a resonance chamber that is believed to be capable saving the Last Castoff from the Sorrow. Finding another castoff, Matkina, The Last uses a Mere, a repository of memory to locate the entrance to Sanctuary. Using the Mere also alters the past, allowing Matkina to be healed of her mental damage. The Last finds Sanctuary, which the Changing God created as a hiding place from the Sorrow, where the Last finds a number of castoffs who represent both sides of the Eternal War: a conflict between followers of the Changing God, and followers of the First Castoff, who believe the God is selfish and malevolent. The Sorrow breaches Sanctuary after the Last is told that the resonance chamber will "defeat" the Sorrow by destroying every castoff in existence. After escaping the Sorrow through a portal to the Bloom, an apparition appears claiming to be the actual Changing God and attempts to possess the Last by force of will. == Development == In a 2007 interview, designers Chris Avellone and Colin McComb, who had worked on Planescape: Torment, stated that although a direct sequel was not considered because the game's story was over, they were open to the idea of a similar-themed Planescape game if they could gather most of the original development team and find an "understanding set of investors". This combination was deemed infeasible at the time. Talks about creating a sequel with the help of a crowd funding platform resumed in 2012, but attempts to acquire a Planescape license from Wizards of the Coast failed. Later that year, Colin McComb joined inXile, which was at the time working on its successfully crowd funded Wasteland 2 project. The studio gained the rights to the Torment title shortly thereafter. In January 2013, inXile's CEO Brian Fargo announced that the spiritual successor to Planescape: Torment was in pre-production and would be set in the Numenera RPG universe created by Monte Cook. Cook acted as one of the designers of the Planescape setting, and Fargo saw the Numenera setting as the natural place to continue the themes of the previous Torment title. Although the connections to its predecessor will not be relatively overt, due to licensing issues, it was noted that certain traditional RPG elements are relatively hard to copyright, and some elements of Planescape: Torment may make a reappearance. Development of the game began shortly after the acquisition of the Torment license, and various inXile staff will transition over to the Numenera team as production on Wasteland 2 winds down. In late January 2013, inXile confirmed the game's title as Torment: Tides of Numenera, and announced that Planescape: Torment composer Mark Morgan would create the soundtrack. The pre-production period was initially expected to continue until October 2013. During this phase, team composition for the project was to be finalised and development would focus on production planning, game design and dialog writing. With the Wasteland 2 project facing delays in 2014, full production of Torment: Tides of Numenera was rescheduled to a later date. A Kickstarter campaign to crowd fund Torment: Tides of Numenera was launched on March 6, 2013 with a US$900,000 goal. Project director Kevin Saunders explained this choice of a funding source by stating that the traditional publisher-based funding model is flawed
Read more →
Morphological antialiasing

Morphological antialiasing (MLAA) is a spatial anti-aliasing technique used in real-time computer graphics. It reduces artifacts, such as jaggies, when representing a high-resolution image at a lower resolution. MLAA is a post-process filtering which detects borders in the resulting image and then finds specific patterns in these. Anti-aliasing is achieved by blending pixels in these borders, according to the pattern they belong to and their position within the pattern. Introduced in 2009, MLAA was an early and influential example of anti-aliasing techniques done in post-processing, which makes them suitable for deferred shading. A similar method in this class is fast approximate anti-aliasing (FXAA). Temporal anti-aliasing, also a post-process, has become the most common anti-aliasing method for real-time rendering and video games. Enhanced subpixel morphological antialiasing, or SMAA, is an image-based GPU-based implementation of MLAA developed by Universidad de Zaragoza and Crytek.
Read more →
Computer-assisted legal research

Computer-assisted legal research (CALR) or computer-based legal research is a mode of legal research that uses databases of court opinions, statutes, court documents, and secondary material. Electronic databases make large bodies of case law easily available. Databases also have additional benefits, such as Boolean searches, evaluating case authority, organizing cases by topic, and providing links to cited material. Databases are available through paid subscription or for free. Subscription-based services include Westlaw, LexisNexis, JustCite, HeinOnline, Bloomberg Law, Lex Intell, VLex and LexEur. As of 2015, the commercial market grossed $8 billion. Free services include OpenJurist, Google Scholar, AltLaw, Ravel Law, WIPO Lex, Law Delta and the databases of the Free Access to Law Movement. == Purposes == Computer-assisted legal research is undertaken by a variety of actors. It is taught as a topic in many law degrees and is used extensively by undergraduate and postgraduate law students in meeting the work requirements of their degree courses. Professors of Law rely on the digitization of primary and secondary sources of law when conducting their research and writing the material that they submit for publication. Professional lawyers rely on computer-assisted legal research in order to properly understand the status of the law and so to act effectively in the best interest of their client. They may also consult the text of case judgements and statutes specifically, as well as wider academic comment, in order to form the basis of (or response to) an appeal. The availability of legal information online differs by type, jurisdiction and subject matter. The types of information available include: Texts of statutes, statutory instruments, civil codes, etc. Explanatory notes and government publications relating to statutes and their operation Texts of governing documents such as constitutions and treaties Case judgements Journals on legal matters or legal theory Dictionaries and legal encyclopedia Legal texts and materials in the form of e-books Current affairs and market information Educational information on the law and its operation == Before the Internet == Prior to the advent and popularization of the World Wide Web, access to digital legal information was largely through the use of CD-ROMs, designed and sold by commercial organizations. Dial-up services were also available from the 1970s. As the use of the Internet spread in the early 1990s, companies such as LexisNexis and Westlaw incorporated Internet connectivity into their software packages. Browser-based legal information started to be published by Legal Information Institutes from 1992. == Publicly available information == The first effort to provide free computer access to legal information was made by two academics, Peter Martin and Tom Bruce, in 1992. Today, the Legal Information Institute freely publishes such resources as the text of the United States Constitution, judgements of the United States Supreme Court, and the text of the United States Code. The Australasian Legal Information Institute (AusLII) was established soon after in 1995. Other legal information institutes, such as those of Great Britain and Ireland (BAILII), Canada (CII) and South Africa (SAfLI) soon followed. LIIs were partially formalized in 2002 following the signing of the Declaration of Free Access to the Law, which has been signed by 54 countries. At the time of writing, the World Legal Information Institute contains in excess of 1800 databases from 123 jurisdictions. Many governments also publish legal information online. For example, UK legislation and statutory instruments have been publicly available online since 2010. Depending on the jurisdiction in question, the decisions of higher appellate courts may also be published online, either by the Legal Information Institute or by the court service directly. Sources of European Union Law are published for free by EUR-Lex in 23 languages, including judgments of the European Courts. Similarly, judgements of the European Court of Human Rights are published on its website.
Read more →
Combs method

The Combs method is a rule base reduction method of writing fuzzy logic rules described by William E. Combs in 1997. It is designed to prevent combinatorial explosion in fuzzy logic rules. The Combs method takes advantage of the logical equality ( ( p ∧ q ) ⇒ r ) ⟺ ( ( p ⇒ r ) ∨ ( q ⇒ r ) ) {\displaystyle ((p\land q)\Rightarrow r)\iff ((p\Rightarrow r)\lor (q\Rightarrow r))} . == Equality proof == The simplest proof of given equality involves usage of truth tables: == Combinatorial explosion == Suppose we have a fuzzy system that considers N variables at a time, each of which can fit into at least one of S sets. The number of rules necessary to cover all the cases in a traditional fuzzy system is S N {\displaystyle S^{N}} , whereas the Combs method would need only S × N {\displaystyle S\times N} rules. For example, if we have five sets and five variables to consider to produce one output, covering all the cases would require 3125 rules in a traditional system, while the Combs method would require only 25 rules, taming the combinatorial explosion that occurs when more inputs or more sets are added to the system. This article will focus on the Combs method itself. To learn more about the way rules are traditionally formed, see fuzzy logic and fuzzy associative matrix. == Example == Suppose we were designing an artificial personality system that determined how friendly the personality is supposed to be towards a person in a strategic video game. The personality would consider its own fear, trust, and love in the other person. A set of rules in the Combs system might look like this: The table translates to: [IF Fear IS Unafraid THEN Friendship IS Enemies OR IF Fear IS ModerateFear THEN Friendship IS Neutral OR IF Fear IS Afraid THEN Friendship IS GoodFriends ] OR [IF Trust IS Distrusting THEN Friendship IS Enemies OR IF Trust IS ModerateTrust THEN Friendship IS Neutral OR IF Trust IS Trusting THEN Friendship IS GoodFriends] OR [IF Love IS Unloving THEN Friendship IS Enemies OR IF Love IS ModerateLove THEN Friendship IS Neutral OR IF Love IS Loving THEN Friendship IS GoodFriends] In this case, because the table follows a straightforward pattern in the output, it could be rewritten as: Each column of the table maps to the output provided in the last row. To obtain the output of the system, we just average the outputs of each rule for that output. For example, to calculate how much the computer is Enemies with the player, we take the average of how much the computer is Unafraid, Distrusting, and Unloving of the player. When all three averages are obtained, the result can then be defuzzified by any of the traditional means.
Read more →