AI Chatbot Interface

AI Chatbot Interface — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • ACLU Mobile Justice

    ACLU Mobile Justice

    ACLU Mobile Justice was a video live streaming application developed for smartphones by various state chapters of the American Civil Liberties Union. It was intended to allow instant, secure video recording and transmission of interactions with, and perceived abuses by, law enforcement officers. Since its release by the ACLU of California for California residents, other versions of the app have been released for 16 other states and the District of Columbia by their ACLU chapters. It was discontinued in February 2025.

    Read more →
  • TRAME

    TRAME

    TRAME (TRAnsmission of MEssages) was the name of the second computer network in the world similar to the internet to be used in an electric utility. Like the internet, the base technology was packet switching; it was developed by the electric utility ENHER in Barcelona. It was deployed by the same utility, first in Catalonia and Aragón, Spain, and later in other places. Its development started in 1974 and the first routers, called nodes at that time, were deployed by 1978. The network was in operation until 2016 (38 years) with successive technological software and hardware updates. == Beginnings == In 1974, packet switching was a technology known only in research circles. The concept began in 1968 in association with the United States' Advanced Research Projects Agency (ARPA) research project ARPANET. The idea of applying the packet switching concept to electric utilities control communication networks first appeared in 1974 when the Swedish power utility Vattenfall started to create its TIDAS packet-switching network and was followed by the Spanish electric utility ENHER, which aimed to telecontrol and automate its high-voltage power grid. For this purpose, ENHER created a specific team of people to develop both the packet-switching network and the supervisory control and data acquisition (SCADA) system, also called the telecontrol system. By 1978 the first four TRAME routers were available and by 1980, eight of them were deployed and operating. The printed circuit boards (PCBs) controlling the communication lines were connected to a shared memory PCB allowing them to exchange data and messages. The project was developed together with its main initial application, the Telecontrol or SCADA system SICL (Sistema Integral de Control Local) with which initially they shared a very similar hardware. The maximum link capacity was 9600 bit/s, which in 1980 was the maximum possible on a 4 kHz wide voice channel at the time. These channels were the basic unit of the then-analog communication systems in use. By that time power utilities used either telephone calls or low speed (below 1200bit/s) dedicated links for telecontrol, typically shared among ten high-voltage electrical substations. == Services == The basic service provided by the TRAME network was SCADA or Telecontrol to automate the high-voltage power grid, thus improving operational efficiency, which was until then operated manually with telephone communication between human operators. Each TRAME router was associated with one or more remote terminal units (RTUs) of the SICL telecontrol system. It also had connected screens, and later PCs, located in electrical substations to interchange messages between them and with the Control Center located in the well-known Casa Fuster in Barcelona. It was a kind of predecessor to today's e-mail. Later, in the 1990s, other protocols (X.25, IP) were developed to include corporate information technology (IT) terminals, company physical surveillance systems and other services. Additionally, applications and terminals were developed for the transmission of voice and video over the TRAME network. == Protocols == The TRAME routing system, like that of the original ARPANET, was based on the Bellman-Ford algorithm but with "split-horizon" as in the Swedish TIDAS network, but with an original improvement. This protocol allows optimal paths to be found in meshed networks for each packet to be transmitted, allowing the shared use of the same network by multiple services. In contrast, traditional circuit-switched technology used to establish dedicated circuits for each service or communication. The addressing of routers and terminals used a proprietary system with a 16-bit address; it would be the equivalent of the well-known IP (Internet Protocol) version 4 (IPv4), still in use on the internet today, which uses 32-bit addresses. It is necessary to take into account that in 1978, the IPv4 protocol did not yet exist since the IPv4 version used on the internet did not appear until 1981, and in fact, did not reach the general public until much later. The line protocols were also proprietary and were called UCL (Unidad de Control de Línea, 'line control unit'), which linked the routers together, and UTR (Unión TRAME-Remotas), the access protocol. They were designed to offer the highest quality of service required by the telecontrol/SCADA function in terms of data integrity and availability set by the International Electrotechnical Commission (IEC) IEC-870-5-1 and ANSI C37.1. standards, and because the protocol used at the time in corporate computer networks, HDLC (high-level data link control), did not offer enough quality for critical industrial applications. Later on, other protocols like X.25 and IP were also made compatible with the aforementioned TRAME protocols. In 2000, the UTR protocol was replaced by the international standard IEC 60870- 5-101/104. Initially network flow control was based on the management of eight data priorities in head-of-the-line (HOL) waiting queues. Later and after some experimentation, a flow control method based on a bit indicating route congestion and management of the gap between packets when accessing the network was adopted. This required measuring the capacity of the route bottleneck. An end-to-end protocol was also added for some flows requiring order preservation like X.25. == Evolution == To last for 38 years, the technology had to endure intense evolution. There were essentially four TRAME generations which are summarized in the table. A description of the four generations of TRAME is provided below. === TRAME 1 === The project began in 1974 and in 1978 a first network with four routers was already installed and in operation at the electric utility ENHER. In 1980, the network had eight nodes in operation (see Figure I). The hardware was based on the Zilog Z80 processor and had a multiprocessor structure with 16 processors sharing a common memory. The software was developed at ENHER's headquarters located in the well-known Casa Fuster, Passeig de Gràcia, 132, Barcelona, using the Z80 assembly language. Beyond 1980 the software began to be written in C programming language and an HP64000 Logic Development System emulator was used for the purpose. The hardware was produced by ISEL, an INI (Instituto Nacional de Indústria) company. The routing system was a variant of Bellman-Ford with split-horizon. It was an improvement of the original ARPA network routing system consisting of an original update procedure which allowed for a faster reaction to changes. The distance function was the number of packets in the output waiting queues plus one. The line protocols (UCL for internal lines linking routers and UTR for accessing the network) were designed to meet the stringent requirements set for telecontrol (SCADA) of high-voltage power networks (IEC-870-5-1 and ANSI C37.1 standards). At the OSI transport layer, windows with a width of 1 to 8, depending on the required service, residing in the terminals were used. Initially, addresses were only 14 bits long to address both the routers (called nodes by then) and the devices connected to them. They were made up of two fields, an 8-bit field to address the router and a 6-bit sub-address to address the terminals connected to it. The node address was assigned to the nodes and not to the ends of the links as in the internet. The basic advantages of TRAME over other technologies used in electric utilities at the time were in part due to the packet technology itself: ability to manage any network topology, automatic adaptability to topological and traffic changes, integration of different link technologies (digital or analog) and capacities in a single network, open and decentralized intercommunicability between users and devices, simultaneous communication with several users and locations from a single physical connection, and integrated network supervision. In fact, the network was provided from its inception with a supervision center consisting of a computer and a synoptic board located at the company's headquarters (see Figure II). But other advantages were due to the specific design of TRAME: high data integrity, priority support for packets, and ease of including special protocols such as the many SCADA protocols in use at that time. All of the above resulted in improved quality of service, especially with respect to data availability and data integrity, and in the integration of services in a single network. Part of the evolution of its deployment can be seen in Figures II to IV. === TRAME 2 === In 1990, TRAME 2 was fully deployed and TRAME 1 was replaced. The processor of the new hardware was Intel 80286 and the hardware structure and external appearance of the routers was very similar to that of TRAME 1. The software was written in C and the above-mentioned emulator continued to be used. Improvements over TRAME 1 were the introduction of the standardized X.25 access protocol

    Read more →
  • Data stream management system

    Data stream management system

    A data stream management system (DSMS) is a computer software system to manage continuous data streams. It is similar to a database management system (DBMS), which is, however, designed for static data in conventional databases. A DBMS also offers a flexible query processing so that the information needed can be expressed using queries. However, in contrast to a DBMS, a DSMS executes a continuous query that is not only performed once, but is permanently installed. Therefore, the query is continuously executed until it is explicitly uninstalled. Since most DSMS are data-driven, a continuous query produces new results as long as new data arrive at the system. This basic concept is similar to complex event processing so that both technologies are partially coalescing. == Functional principle == One important feature of a DSMS is the possibility to handle potentially infinite and rapidly changing data streams by offering flexible processing at the same time, although there are only limited resources such as main memory. The following table provides various principles of DSMS and compares them to traditional DBMS. == Processing and streaming models == One of the biggest challenges for a DSMS is to handle potentially infinite data streams using a fixed amount of memory and no random access to the data. There are different approaches to limit the amount of data in one pass, which can be divided into two classes. For the one hand, there are compression techniques that try to summarize the data and for the other hand there are window techniques that try to portion the data into (finite) parts. === Synopses === The idea behind compression techniques is to maintain only a synopsis of the data, but not all (raw) data points of the data stream. The algorithms range from selecting random data points called sampling to summarization using histograms, wavelets or sketching. One simple example of a compression is the continuous calculation of an average. Instead of memorizing each data point, the synopsis only holds the sum and the number of items. The average can be calculated by dividing the sum by the number. However, it should be mentioned that synopses cannot reflect the data accurately. Thus, a processing that is based on synopses may produce inaccurate results. === Windows === Instead of using synopses to compress the characteristics of the whole data streams, window techniques only look on a portion of the data. This approach is motivated by the idea that only the most recent data are relevant. Therefore, a window continuously cuts out a part of the data stream, e.g. the last ten data stream elements, and only considers these elements during the processing. There are different kinds of such windows like sliding windows that are similar to FIFO lists or tumbling windows that cut out disjoint parts. Furthermore, the windows can also be differentiated into element-based windows, e.g., to consider the last ten elements, or time-based windows, e.g., to consider the last ten seconds of data. There are also different approaches to implementing windows. There are, for example, approaches that use timestamps or time intervals for system-wide windows or buffer-based windows for each single processing step. Sliding-window query processing is also suitable to being implemented in parallel processors by exploiting parallelism between different windows and/or within each window extent. == Query processing == Since there are a lot of prototypes, there is no standardized architecture. However, most DSMS are based on the query processing in DBMS by using declarative languages to express queries, which are translated into a plan of operators. These plans can be optimized and executed. A query processing often consists of the following steps. === Formulation of continuous queries === The formulation of queries is mostly done using declarative languages like SQL in DBMS. Since there are no standardized query languages to express continuous queries, there are a lot of languages and variations. However, most of them are based on SQL, such as the Continuous Query Language (CQL), StreamSQL and ESP. There are also graphical approaches where each processing step is a box and the processing flow is expressed by arrows between the boxes. The language strongly depends on the processing model. For example, if windows are used for the processing, the definition of a window has to be expressed. In StreamSQL, a query with a sliding window for the last 10 elements looks like follows: This stream continuously calculates the average value of "price" of the last 10 tuples, but only considers those tuples whose prices are greater than 100.0. In the next step, the declarative query is translated into a logical query plan. A query plan is a directed graph where the nodes are operators and the edges describe the processing flow. Each operator in the query plan encapsulates the semantic of a specific operation, such as filtering or aggregation. In DSMSs that process relational data streams, the operators are equal or similar to the operators of the Relational algebra, so that there are operators for selection, projection, join, and set operations. This operator concept allows the very flexible and versatile processing of a DSMS. === Optimization of queries === The logical query plan can be optimized, which strongly depends on the streaming model. The basic concepts for optimizing continuous queries are equal to those from database systems. If there are relational data streams and the logical query plan is based on relational operators from the Relational algebra, a query optimizer can use the algebraic equivalences to optimize the plan. These may be, for example, to push selection operators down to the sources, because they are not so computationally intensive like join operators. Furthermore, there are also cost-based optimization techniques like in DBMS, where a query plan with the lowest costs is chosen from different equivalent query plans. One example is to choose the order of two successive join operators. In DBMS this decision is mostly done by certain statistics of the involved databases. But, since the data of a data streams is unknown in advance, there are no such statistics in a DSMS. However, it is possible to observe a data stream for a certain time to obtain some statistics. Using these statistics, the query can also be optimized later. So, in contrast to a DBMS, some DSMS allows to optimize the query even during runtime. Therefore, a DSMS needs some plan migration strategies to replace a running query plan with a new one. === Transformation of queries === Since a logical operator is only responsible for the semantics of an operation but does not consist of any algorithms, the logical query plan must be transformed into an executable counterpart. This is called a physical query plan. The distinction between a logical and a physical operator plan allows more than one implementation for the same logical operator. The join, for example, is logically the same, although it can be implemented by different algorithms like a Nested loop join or a Sort-merge join. Notice, these algorithms also strongly depend on the used stream and processing model. Finally, the query is available as a physical query plan. === Execution of queries === Since the physical query plan consists of executable algorithms, it can be directly executed. For this, the physical query plan is installed into the system. The bottom of the graph (of the query plan) is connected to the incoming sources, which can be everything like connectors to sensors. The top of the graph is connected to the outgoing sinks, which may be for example a visualization. Since most DSMSs are data-driven, a query is executed by pushing the incoming data elements from the source through the query plan to the sink. Each time when a data element passes an operator, the operator performs its specific operation on the data element and forwards the result to all successive operators. == Examples == AURORA, StreamBase Systems, Inc. Archived 23 March 2009 at the Wayback Machine Hortonworks DataFlow IBM Streams NIAGARA Query Engine NiagaraST: A Research Data Stream Management System at Portland State University Odysseus, an open source Java-based framework for Data Stream Management Systems Pipeline DB PIPES Archived 24 December 2016 at the Wayback Machine, webMethods Business Events QStream SAS Event Stream Processing SQLstream STREAM StreamGlobe StreamInsight TelegraphCQ WSO2 Stream Processor

    Read more →
  • PGP word list

    PGP word list

    The PGP Word List ("Pretty Good Privacy word list", also called a biometric word list for reasons explained below) is a list of words for conveying data bytes in a clear unambiguous way via a voice channel. They are analogous in purpose to the NATO phonetic alphabet, except that a longer list of words is used, each word corresponding to one of the 256 distinct numeric byte values. == History and structure == The PGP Word List was designed in 1995 by Patrick Juola, a computational linguist, and Philip Zimmermann, creator of PGP. The words were carefully chosen for their phonetic distinctiveness, using genetic algorithms to select lists of words that had optimum separations in phoneme space. The candidate word lists were randomly drawn from Grady Ward's Moby Pronunciator list as raw material for the search, successively refined by the genetic algorithms. The automated search converged to an optimized solution in about 40 hours on a DEC Alpha, a particularly fast machine in that era. The Zimmermann–Juola list was originally designed to be used in PGPfone, a secure VoIP application, to allow the two parties to verbally compare a short authentication string to detect a man-in-the-middle attack (MiTM). It was called a biometric word list because the authentication depended on the two human users recognizing each other's distinct voices as they read and compared the words over the voice channel, binding the identity of the speaker with the words, which helped protect against the MiTM attack. The list can be used in many other situations where a biometric binding of identity is not needed, so calling it a biometric word list may be imprecise. Later, it was used in PGP to compare and verify PGP public key fingerprints over a voice channel. This is known in PGP applications as the "biometric" representation. When it was applied to PGP, the list of words was further refined, with contributions by Jon Callas. More recently, it has been used in Zfone and the ZRTP protocol, the successor to PGPfone. The list is actually composed of two lists, each containing 256 phonetically distinct words, in which each word represents a different byte value between 0 and 255. Two lists are used because reading aloud long random sequences of human words usually risks three kinds of errors: 1) transposition of two consecutive words, 2) duplicate words, or 3) omitted words. To detect all three kinds of errors, the two lists are used alternately for the even-offset bytes and the odd-offset bytes in the byte sequence. Each byte value is actually represented by two different words, depending on whether that byte appears at an odd or an even offset from the beginning of the byte sequence. The two lists are readily distinguished by the number of syllables; the odd list has words of three syllables, the even list has two. The two lists have a maximum word length of 11 and 9 letters, respectively. Using a two-list scheme was suggested by Zhahai Stewart. == Examples == Each byte in a bytestring is encoded as a single word. A sequence of bytes is rendered in network byte order, from left to right. For example, the leftmost (i.e. byte 0) is considered "even" and is encoded using the PGP Even Word table. The next byte to the right (i.e. byte 1) is considered "odd" and is encoded using the PGP Odd Word table. This process repeats until all bytes are encoded. Thus, "E582" produces "topmost Istanbul", whereas "82E5" produces "miser travesty". A PGP public key fingerprint that displayed in hexadecimal as E582 94F2 E9A2 2748 6E8B 061B 31CC 528F D7FA 3F19 would display in PGP Words (the "biometric" fingerprint) as topmost Istanbul Pluto vagabond treadmill Pacific brackish dictator goldfish Medusa afflict bravado chatter revolver Dupont midsummer stopwatch whimsical cowbell bottomless The order of bytes in a bytestring depends on endianness. == Other word lists for data == There are several other word lists for conveying data in a clear unambiguous way via a voice channel: the NATO phonetic alphabet maps individual letters and digits to individual words the S/KEY system maps 64 bit numbers to 6 short words of 1 to 4 characters each from a publicly accessible 2048-word dictionary. The same dictionary is used in RFC 1760 and RFC 2289. the Diceware system maps five base-6 random digits (almost 13 bits of entropy) to a word from a dictionary of 7,776 distinct words. the Electronic Frontier Foundation has published a set of improved word lists based on the same concept FIPS 181: Automated Password Generator converts random numbers into somewhat pronounceable "words". mnemonic encoding converts 32 bits of data into 3 words from a vocabulary of 1626 words. what3words encodes geographic coordinates in 3 dictionary words. the BIP39 standard permits encoding a cryptographic key of fixed size (128 or 256 bits, usually the unencrypted master key of a Cryptocurrency wallet) into a short sequence of readable words known as the seed phrase, for the purpose of storing the key offline. This is used in cryptocurrencies such as Bitcoin or Monero. Like the PGP word list, the Bytewords standard maps each possible byte to a word. There is only one list, rather than two. The words are uniformly four letters long and can be uniquely identified by their first and last letters

    Read more →
  • Personoid

    Personoid

    Personoid is the concept coined by Stanisław Lem, a Polish science-fiction writer, in Non Serviam, from his book A Perfect Vacuum (1971). His personoids are an abstraction of functions of human mind and they live in computers; they do not need any human-like physical body. In cognitive and software modeling, personoid is a research approach to the development of intelligent autonomous agents. In frame of the IPK (Information, Preferences, Knowledge) architecture, it is a framework of abstract intelligent agent with a cognitive and structural intelligence. It can be seen as an essence of high intelligent entities. From the philosophical and systemics perspectives, personoid societies can also be seen as the carriers of a culture. According to N. Gessler, the personoids study can be a base for the research on artificial culture and culture evolution. == Personoids on TV and cinema == Welt am Draht (1973) The Thirteenth Floor (1999)

    Read more →
  • Bus encryption

    Bus encryption

    Bus encryption is the use of encrypted program instructions on a data bus in a computer that includes a secure cryptoprocessor for executing the encrypted instructions. Bus encryption is used primarily in electronic systems that require high security, such as automated teller machines, TV set-top boxes, and secure data communication devices such as two-way digital radios. Bus encryption can also mean encrypted data transmission on a data bus from one processor to another processor. For example, from the CPU to a GPU which does not require input of encrypted instructions. Such bus encryption is used by Windows Vista and newer Microsoft operating systems to protect certificates, BIOS, passwords, and program authenticity. PVP-UAB (Protected Video Path) provides bus encryption of premium video content in PCs as it passes over the PCIe bus to graphics cards to enforce digital rights management. The need for bus encryption arises when multiple people have access to the internal circuitry of an electronic system, either because they service and repair such systems, stock spare components for the systems, own the system, steal the system, or find a lost or abandoned system. Bus encryption is necessary not only to prevent tampering of encrypted instructions that may be easily discovered on a data bus or during data transmission, but also to prevent discovery of decrypted instructions that may reveal security weaknesses that an intruder can exploit. In TV set-top boxes, it is necessary to download program instructions periodically to customer's units to provide new features and to fix bugs. These new instructions are encrypted before transmission, but must also remain secure on data buses and during execution to prevent the manufacture of unauthorized cable TV boxes. This can be accomplished by secure crypto-processors that read encrypted instructions on the data bus from external data memory, decrypt the instructions in the cryptoprocessor, and execute the instructions in the same cryptoprocessor.

    Read more →
  • InfiniBand

    InfiniBand

    InfiniBand (IB) is a computer networking standard used in high-performance computing that features very high throughput and very low latency. It is used for data interconnect both among and within computers. InfiniBand is also used as either a direct or switched interconnect between servers and storage systems, as well as an interconnect between storage systems. It is designed to be scalable and uses a switched fabric network topology. Between 2014 and June 2016, it was the most commonly used interconnect in the TOP500 list of supercomputers. Mellanox (acquired by Nvidia) manufactures InfiniBand host bus adapters and network switches, which are used by large computer system and database vendors in their product lines. As a computer cluster interconnect, IB competes with Ethernet, Fibre Channel, and Intel Omni-Path. The technology is promoted by the InfiniBand Trade Association. == History == InfiniBand originated in 1999 from the merger of two competing designs: Future I/O and Next Generation I/O (NGIO). NGIO was led by Intel, with a specification released in 1998, and joined by Sun Microsystems and Dell. Future I/O was backed by Compaq, IBM, and Hewlett-Packard. This led to the formation of the InfiniBand Trade Association (IBTA), which included both sets of hardware vendors as well as software vendors such as Microsoft. At the time it was thought some of the more powerful computers were approaching the interconnect bottleneck of the PCI bus, in spite of upgrades like PCI-X. Version 1.0 of the InfiniBand Architecture Specification was released in 2000. Initially the IBTA vision for IB was simultaneously a replacement for PCI in I/O, Ethernet in the machine room, cluster interconnect and Fibre Channel. IBTA also envisaged decomposing server hardware on an IB fabric. Mellanox had been founded in 1999 to develop NGIO technology, but by 2001 shipped an InfiniBand product line called InfiniBridge at 10 Gbit/second speeds. Following the burst of the dot-com bubble there was hesitation in the industry to invest in such a far-reaching technology jump. By 2002, Intel announced that instead of shipping IB integrated circuits ("chips"), it would focus on developing PCI Express, and Microsoft discontinued IB development in favor of extending Ethernet. Sun Microsystems and Hitachi continued to support IB. In 2003, the System X supercomputer built at Virginia Tech used InfiniBand in what was estimated to be the third largest computer in the world at the time. The OpenIB Alliance (later renamed OpenFabrics Alliance) was founded in 2004 to develop an open set of software for the Linux kernel. By February, 2005, the support was accepted into the 2.6.11 Linux kernel. In November 2005 storage devices finally were released using InfiniBand from vendors such as Engenio. Cisco, desiring to keep technology superior to Ethernet off the market, adopted a "buy to kill" strategy. Cisco successfully killed InfiniBand switching companies such as Topspin via acquisition. Of the top 500 supercomputers in 2009, Gigabit Ethernet was the internal interconnect technology in 259 installations, compared with 181 using InfiniBand. In 2010, market leaders Mellanox and Voltaire merged, leaving just one other IB vendor, QLogic, primarily a Fibre Channel vendor. At the 2011 International Supercomputing Conference, links running at about 56 gigabits per second (known as FDR, see below), were announced and demonstrated by connecting booths in the trade show. In 2012, Intel acquired QLogic's InfiniBand technology, leaving only one independent supplier. By 2014, InfiniBand was the most popular internal connection technology for supercomputers, although within two years, 10 Gigabit Ethernet started displacing it. In 2016, it was reported that Oracle Corporation (an investor in Mellanox) might engineer its own InfiniBand hardware. In 2019 Nvidia acquired Mellanox, the last independent supplier of InfiniBand products. == Specification == Specifications are published by the InfiniBand trade association. === Performance === Original names for speeds were single-data rate (SDR), double-data rate (DDR) and quad-data rate (QDR) as given below. Subsequently, other three-letter initialisms were added for even higher data rates. Notes Each link is duplex. Links can be aggregated: most systems use a 4 link/lane connector (QSFP). HDR often makes use of 2x links (aka HDR100, 100 Gb link using 2 lanes of HDR, while still using a QSFP connector). NDR introduced OSFP connectors which host one or two links at 2x (NDR200) or 4x (NDR400). They are not logically configured as a single 8x link, even when connecting switches together with an OSFP cable. InfiniBand provides remote direct memory access (RDMA) capabilities for low CPU overhead. === Topology === InfiniBand uses a switched fabric topology, as opposed to early shared medium Ethernet. All transmissions begin or end at a channel adapter. Each processor contains a host channel adapter (HCA) and each peripheral has a target channel adapter (TCA). These adapters can also exchange information for security or quality of service (QoS). === Messages === InfiniBand transmits data in packets of up to 4 KB that are taken together to form a message. A message can be: a remote direct memory access read or write a channel send or receive a transaction-based operation (that can be reversed) a multicast transmission an atomic operation === Physical interconnection === In addition to a board form factor connection, it can use both active and passive copper (up to 10 meters) and optical fiber cable (up to 10 km). QSFP connectors are used. The InfiniBand Association also specified the CXP connector system for speeds up to 120 Gbit/s over copper, active optical cables, and optical transceivers using parallel multi-mode fiber cables with 24-fiber MPO connectors. === Software interfaces === Mellanox operating system support is available for Solaris, FreeBSD, Red Hat Enterprise Linux, SUSE Linux Enterprise Server (SLES), Windows, HP-UX, VMware ESX, and AIX. InfiniBand has no specific standard application programming interface (API). The standard only lists a set of verbs such as ibv_open_device or ibv_post_send, which are abstract representations of functions or methods that must exist. The syntax of these functions is left to the vendors. Sometimes for reference this is called the verbs API. The de facto standard software is developed by OpenFabrics Alliance and called the Open Fabrics Enterprise Distribution (OFED). It is released under two licenses GPL2 or BSD license for Linux and FreeBSD, and as Mellanox OFED for Windows (product names: WinOF / WinOF-2; attributed as host controller driver for matching specific ConnectX 3 to 5 devices) under a choice of BSD license for Windows. It has been adopted by most of the InfiniBand vendors, for Linux, FreeBSD, and Microsoft Windows. IBM refers to a software library called libibverbs, for its AIX operating system, as well as "AIX InfiniBand verbs". The Linux kernel support was integrated in 2005 into the kernel version 2.6.11. === Ethernet over InfiniBand === Ethernet over InfiniBand, abbreviated to EoIB, is an Ethernet implementation over the InfiniBand protocol and connector technology. EoIB enables multiple Ethernet bandwidths varying on the InfiniBand (IB) version. Ethernet's implementation of the Internet Protocol Suite, usually referred to as TCP/IP, is different in some details compared to the direct InfiniBand protocol in IP over IB (IPoIB).

    Read more →
  • Forward anonymity

    Forward anonymity

    Forward anonymity is a property of a cryptographic system which prevents an attacker who has recorded past encrypted communications from discovering its contents and participants in the future. This property is analogous to forward secrecy. An example of a system which uses forward anonymity is a public key cryptography system, where the public key is well-known and used to encrypt a message, and an unknown private key is used to decrypt it. In this system, one of the keys is always said to be compromised, but messages and their participants are still unknown by anyone without the corresponding private key. In contrast, an example of a system which satisfies the perfect forward secrecy property is one in which a compromise of one key by an attacker (and consequent decryption of messages encrypted with that key) does not undermine the security of previously used keys. Forward secrecy does not refer to protecting the content of the message, but rather to the protection of keys used to decrypt messages. == History == Originally introduced by Whitfield Diffie, Paul van Oorschot, and Michael James Wiener to describe a property of STS (station-to-station protocol) involving a long term secret, either a private key or a shared password. == Public Key Cryptography == Public Key Cryptography is a common form of a forward anonymous system. It is used to pass encrypted messages, preventing any information about the message from being discovered if the message is intercepted by an attacker. It uses two keys, a public key and a private key. The public key is published, and is used by anyone to encrypt a plaintext message. The Private key is not well known, and is used to decrypt cyphertext. Public key cryptography is known as an asymmetric decryption algorithm because of different keys being used to perform opposing functions. Public key cryptography is popular because, while it is computationally easy to create a pair of keys, it is extremely difficult to determine the private key knowing only the public key. Therefore, the public key being well known does not allow messages which are intercepted to be decrypted. This is a forward anonymous system because one compromised key (the public key) does not compromise the anonymity of the system. == Web of Trust == A variation of the public key cryptography system is a Web of trust, where each user has both a public and private key. Messages sent are encrypted using the intended recipient's public key, and only this recipient's private key will decrypt the message. They are also signed with the senders private key. This creates added security where it becomes more difficult for an attacker to pretend to be a user, as the lack of a private key signature indicates a non-trusted user. == Limitations == A forward anonymous system does not necessarily mean a wholly secure system. A successful cryptanalysis of a message or sequence of messages can still decode the information without the use of a private key or long term secret. == News == Forward anonymity, along with other privacy-protecting measures, received a burst of media attention after the leak of classified information by Edward Snowden, beginning in June, 2013, which indicated that the NSA and FBI, through specially crafted backdoors in software and computer systems, were conducting mass surveillance over large parts of the population of both the United States (see Mass surveillance in the United States), Europe, Asia, and other parts of the world. They justified this practice as an aid to catch predatory pedophiles. Opponents to this practice argue that leaving in a back door to law enforcement increases the risk of attackers being able to decrypt information, as well as questioning its legality under the US Constitution, specifically being a form of illegal Search and Seizure.

    Read more →
  • Softwarp

    Softwarp

    Softwarp is a software technique to warp an image so that it can be projected on a curved screen. This can be done in real time by inserting the softwarp as a last step in the rendering cycle. The problem is to know how the image should be warped to look correct on the curved screen. There are several techniques to auto calibrate the warping by projecting a pattern and using cameras and/or sensors. The information from the sensors is sent to the software so that it can analyze the data and calculate the curvature of the projection screen. == Usage == The softwarp can be used to project virtual views on curved walls and domes. These are usually used in vehicle simulators, for instance boat-, car- and airplane simulators. To make it possible to cover a dome with a 360 degree view you need to use several projectors. A problem with using several projectors on the same screen is that the edges between the projected images get about twice the amount of light. This is solved by using a technique called edge blending. With this technique a “filter” is inserted on the edge that fades the image from 100% light strength (luminance) to 0% (the lowest luminance depends on the contrast ratio of the projector). == History == The first warping technologies used a hardware image processing unit to warp the image. This processing unit was inserted between the graphics card and the projector. The problem with this technique is that it depends on the type of signal and the quality of the signal from the graphics card to warp it correctly. The process unit also needs several lines of image information before it can start sending out the warped image. This adds a latency to the display system that could be a problem in simulators that need fast response time, for instance fighter jet simulators. Softwarping eliminates the latency.

    Read more →
  • Social media newsroom

    Social media newsroom

    A social media newsroom is a company resource, set up to increase the functionality and usability of the traditional online newsroom. Social media newsrooms (SMNs) are intended to encourage dialogue and information sharing. Unlike online newsrooms, content is accessible to more than just journalists, but to all those with whom the company engages such as bloggers, their prospects, customers, business partners and investors. It gives these stakeholders access to news, public relations announcements, images, audio, video and other multimedia files. In addition to posting press releases and corporate news, companies can integrate other social content from sites such as YouTube, Flickr and Slideshow as well as streams from corporate Twitter accounts. Traditional tools for journalists such as corporate fast facts, leadership information, a multimedia library, financial information, awards and other recent media coverage are also included in an SMN. Examples of companies effectively using social media newsrooms include Opel Group, Pressat, First Direct, MyNewsdesk, Scania and Newport Beach.

    Read more →
  • Data Transformation Services

    Data Transformation Services

    Data Transformation Services (DTS) is a Microsoft database tool with a set of objects and utilities to allow the automation of extract, transform and load operations to or from a database. The objects are DTS packages and their components, and the utilities are called DTS tools. DTS was included with earlier versions of Microsoft SQL Server, and was almost always used with SQL Server databases, although it could be used independently with other databases. DTS allows data to be transformed and loaded from heterogeneous sources using OLE DB, ODBC, or text-only files, into any supported database. DTS can also allow automation of data import or transformation on a scheduled basis, and can perform additional functions such as FTPing files and executing external programs. In addition, DTS provides an alternative method of version control and backup for packages when used in conjunction with a version control system, such as Microsoft Visual SourceSafe. DTS has been superseded by SQL Server Integration Services in later releases of Microsoft SQL Server though there was some backwards compatibility and ability to run DTS packages in the new SSIS for a time. == History == In SQL Server versions 6.5 and earlier, database administrators (DBAs) used SQL Server Transfer Manager and Bulk Copy Program, included with SQL Server, to transfer data. These tools had significant shortcomings, and many DBAs used third-party tools such as Pervasive Data Integrator to transfer data more flexibly and easily. With the release of SQL Server 7 in 1998, "Data Transformation Services" was packaged with it to replace all these tools. The concept, design, and implementation of the Data Transformation Services was led by Stewart P. MacLeod (SQL Server Development Group Program Manager), Vij Rajarajan (SQL Server Lead Developer), and Ted Hart (SQL Server Lead Developer). The goal was to make it easier to import, export, and transform heterogeneous data and simplify the creation of data warehouses from operational data sources. SQL Server 2000 expanded DTS functionality in several ways. It introduced new types of tasks, including the ability to FTP files, move databases or database components, and add messages into Microsoft Message Queue. DTS packages can be saved as a Visual Basic file in SQL Server 2000, and this can be expanded to save into any COM-compliant language. Microsoft also integrated packages into Windows 2000 security and made DTS tools more user-friendly; tasks can accept input and output parameters. DTS comes with all editions of SQL Server 7 and 2000, but was superseded by SQL Server Integration Services in the Microsoft SQL Server 2005 release in 2005. == DTS packages == The DTS package is the fundamental logical component of DTS; every DTS object is a child component of the package. Packages are used whenever one modifies data using DTS. All the metadata about the data transformation is contained within the package. Packages can be saved directly in a SQL Server, or can be saved in the Microsoft Repository or in COM files. SQL Server 2000 also allows a programmer to save packages in a Visual Basic or other language file (when stored to a VB file, the package is actually scripted—that is, a VB script is executed to dynamically create the package objects and its component objects). A package can contain any number of connection objects, but does not have to contain any. These allow the package to read data from any OLE DB-compliant data source, and can be expanded to handle other sorts of data. The functionality of a package is organized into tasks and steps. A DTS Task is a discrete set of functionalities executed as a single step in a DTS package. Each task defines a work item to be performed as part of the data movement and data transformation process or as a job to be executed. Data Transformation Services supplies a number of tasks that are part of the DTS object model and that can be accessed graphically through the DTS Designer or accessed programmatically. These tasks, which can be configured individually, cover a wide variety of data copying, data transformation and notification situations. For example, the following types of tasks represent some actions that you can perform by using DTS: executing a single SQL statement, sending an email, and transferring a file with FTP. A step within a DTS package describes the order in which tasks are run and the precedence constraints that describe what to do in the case damage or of failure. These steps can be executed sequentially or in parallel. Packages can also contain global variables which can be used throughout the package. SQL Server 2000 allows input and output parameters for tasks, greatly expanding the usefulness of global variables. DTS packages can be edited, password protected, scheduled for execution, and retrieved by version. == DTS tools == DTS tools packaged with SQL Server include the DTS wizards, DTS Designer, and DTS Programming Interfaces. === DTS wizards === The DTS wizards can be used to perform simple or common DTS tasks. These include the Import/Export Wizard and the Copy of Database Wizard. They provide the simplest method of copying data between OLE DB data sources. There is a great deal of functionality that is not available by merely using a wizard. However, a package created with a wizard can be saved and later altered with one of the other DTS tools. A Create Publishing Wizard is also available to schedule packages to run at certain times. This only works if SQL Server Agent is running; otherwise the package will be scheduled, but will not be executed. === DTS Designer === The DTS Designer is a graphical tool used to build complex DTS Packages with workflows and event-driven logic. DTS Designer can also be used to edit and customize DTS Packages created with the DTS wizard. Each connection and task in DTS Designer is shown with a specific icon. These icons are joined with precedence constraints, which specify the order and requirements for tasks to be run. One task may run, for instance, only if another task succeeds (or fails). Other tasks may run concurrently. The DTS Designer has been criticized for having unusual quirks and limitations, such as the inability to visually copy and paste multiple tasks at one time. Many of these shortcomings have been overcome in SQL Server Integration Services, DTS's successor. === DTS Query Designer === A graphical tool used to build queries in DTS. === DTS Run Utility === DTS Packages can be run from the command line using the DTSRUN Utility. The utility is invoked using the following syntax: dtsrun /S server_name[\instance_name] { {/[~]U user_name [/[~]P password]} | /E } ] { {/[~]N package_name } | {/[~]G package_guid_string} | {/[~]V package_version_guid_string} } [/[~]M package_password] [/[~]F filename] [/[~]R repository_database_name] [/A global_variable_name:typeid=value] [/L log_file_name] [/W NT_event_log_completion_status] [/Z] [/!X] [/!D] [/!Y] [/!C] ] When passing in parameters which are mapped to Global Variables, you are required to include the typeid. This is rather difficult to find on the Microsoft site. Below are the TypeIds used in passing in these values.

    Read more →
  • Computer network

    Computer network

    In computer science, computer engineering, and telecommunications, a network is a group of communicating computers and peripherals known as hosts, which communicate data to other hosts via communication protocols, as facilitated by networking hardware. Within a computer network, hosts are identified by network addresses, which allow networking hardware to locate and identify hosts. Hosts may also have hostnames, memorable labels for the host nodes, which can be mapped to a network address using a hosts file or a name server such as Domain Name Service. The physical medium that supports information exchange includes wired media like copper cables, optical fibers, and wireless radio-frequency media. The arrangement of hosts and hardware within a network architecture is known as the network topology. The first computer network was created in 1940 when George Stibitz connected a terminal at Dartmouth to his Complex Number Calculator at Bell Labs in New York. Today, almost all computers are connected to a computer network, such as the global Internet or embedded networks such as those found in many modern electronic devices. Many applications have only limited functionality unless they are connected to a network. Networks support applications and services, such as access to the World Wide Web, digital video and audio, application and storage servers, printers, and email and instant messaging applications. == History == === Early origins (1940 – 1960s) === In 1940, George Stibitz of Bell Labs connected a teletype at Dartmouth to a Bell Labs computer running his Complex Number Calculator to demonstrate the use of computers at long distance. This was the first real-time, remote use of a computing machine. In the late 1950s, a network of computers was built for the U.S. military Semi-Automatic Ground Environment (SAGE) radar system using the Bell 101 modem. It was the first commercial modem for computers, released by AT&T Corporation in 1958. The modem allowed digital data to be transmitted over regular unconditioned telephone lines at a speed of 110 bits per second (bit/s). In 1959, Christopher Strachey filed a patent application for time-sharing in the United Kingdom and John McCarthy initiated the first project to implement time-sharing of user programs at MIT. Strachey passed the concept on to J. C. R. Licklider at the inaugural UNESCO Information Processing Conference in Paris that year. McCarthy was instrumental in the creation of three of the earliest time-sharing systems (the Compatible Time-Sharing System in 1961, the BBN Time-Sharing System in 1962, and the Dartmouth Time-Sharing System in 1963). In 1959, Anatoly Kitov proposed to the Central Committee of the Communist Party of the Soviet Union a detailed plan for the re-organization of the control of the Soviet armed forces and of the Soviet economy on the basis of a network of computing centers. Kitov's proposal was rejected, as later was the 1962 OGAS economy management network project. During the 1960s, Paul Baran and Donald Davies independently invented the concept of packet switching for data communication between computers over a network. Baran's work addressed adaptive routing of message blocks across a distributed network, but did not include routers with software switches, nor the idea that users, rather than the network itself, would provide the reliability. Davies' hierarchical network design included high-speed routers, communication protocols and the essence of the end-to-end principle. The NPL network, a local area network at the National Physical Laboratory (United Kingdom), pioneered the implementation of the concept in 1968-69 using 768 kbit/s links. Both Baran's and Davies' inventions were seminal contributions that influenced the development of computer networks. === ARPANET (1969 – 1974) === In 1962 and 1963, J. C. R. Licklider sent a series of memos to office colleagues discussing the concept of the "Intergalactic Computer Network", a computer network intended to allow general communications among computer users. This ultimately became the basis for the ARPANET, which began in 1969. That year, the first four nodes of the ARPANET were connected using 50 kbit/s circuits between the University of California at Los Angeles, the Stanford Research Institute, the University of California, Santa Barbara, and the University of Utah. Designed principally by Bob Kahn, the network's routing, flow control, software design and network control were developed by the IMP team working for Bolt Beranek & Newman. In the early 1970s, Leonard Kleinrock carried out mathematical work to model the performance of packet-switched networks, which underpinned the development of the ARPANET. His theoretical work on hierarchical routing in the late 1970s with student Farouk Kamoun remains critical to the operation of the Internet today. In 1973, Peter Kirstein put internetworking into practice at University College London (UCL), connecting the ARPANET to British academic networks, the first international heterogeneous computer network. That same year, Robert Metcalfe wrote a formal memo at Xerox PARC describing Ethernet, a local area networking system he created with David Boggs. It was inspired by the packet radio ALOHAnet, started by Norman Abramson and Franklin Kuo at the University of Hawaii in the late 1960s. Metcalfe and Boggs, with John Shoch and Edward Taft, also developed the PARC Universal Packet for internetworking. That year, the French CYCLADES network, directed by Louis Pouzin was the first to make the hosts responsible for the reliable delivery of data, rather than this being a centralized service of the network itself. === The internet (1974 – present) === In 1974, Vint Cerf and Bob Kahn published their seminal 1974 paper on internetworking, A Protocol for Packet Network Intercommunication. Later that year, Cerf, Yogen Dalal, and Carl Sunshine wrote the first Transmission Control Protocol (TCP) specification, RFC 675, coining the term Internet as a shorthand for internetworking. In July 1976, Metcalfe and Boggs published their paper "Ethernet: Distributed Packet Switching for Local Computer Networks" and in December 1977, together with Butler Lampson and Charles P. Thacker, they received U.S. patent 4063220A for their invention. In 1976, John Murphy of Datapoint Corporation created ARCNET, a token-passing network first used to share storage devices. In 1979, Robert Metcalfe pursued making Ethernet an open standard. In 1980, Ethernet was upgraded from the original 2.94 Mbit/s protocol to the 10 Mbit/s protocol, which was developed by Ron Crane, Bob Garner, Roy Ogus, Hal Murray, Dave Redell and Yogen Dalal. In 1986, the National Science Foundation (NSF) launched the National Science Foundation Network (NSFNET) as a general-purpose research network connecting various NSF-funded sites to each other and to regional research and education networks. In 1995, the transmission speed capacity for Ethernet increased from 10 Mbit/s to 100 Mbit/s. By 1998, Ethernet supported transmission speeds of 1 Gbit/s. Subsequently, higher speeds of up to 800 Gbit/s were added (as of 2025). The scaling of Ethernet has been a contributing factor to its continued use. In the 1980s and 1990s, as embedded systems were becoming increasingly important in factories, cars, and airplanes, network protocols were developed to allow the embedded computers to communicate. In the late 1990s and 2000s, ubiquitous computing and an Internet of Things became popular. === Commercial usage === In 1960, the commercial airline reservation system semi-automatic business research environment (SABRE) went online with two connected mainframes. In 1965, Western Electric introduced the first widely used telephone switch that implemented computer control in the switching fabric. In 1972, commercial services were first deployed on experimental public data networks in Europe. Public data networks in Europe, North America and Japan began using X.25 in the late 1970s and interconnected with X.75. This underlying infrastructure was used for expanding TCP/IP networks in the 1980s. In 1977, the first long-distance fiber network was deployed by GTE in Long Beach, California. == Hardware == === Network links === The transmission media used to link devices to form a computer network include electrical cable, optical fiber, and free space. In the OSI model, the software to handle the media is defined at layers 1 and 2 — the physical layer and the data link layer. Common examples of networking technologies include: Ethernet is a widely adopted family of networking technologies that use copper and fiber media in local area networks (LAN). The media and protocol standards that enable communication between networked devices over Ethernet are defined by IEEE 802.3. Wireless LAN standards, which use radio waves. Some standards use infrared signals as a transmission medium. Power line communication uses a building's power cabling to transmit

    Read more →
  • Slopaganda

    Slopaganda

    Slopaganda is a portmanteau of "AI slop" and "propaganda", referring to AI-generated content designed to manipulate beliefs, emotions, and political decision-making at scale. The term is credited to Michał Klincewicz, an assistant professor in the Department of Computational Cognitive Science at Tilburg University, in 2025. == Definition == Slopaganda is distinguished from traditional propaganda by three features: scale, scope, and speed. Generative AI makes it possible to produce large volumes of content quickly and at low cost, allows for highly personalised and targeted messaging to specific sub-audiences, and leverages the hyper-connectivity of social networks to accelerate dissemination beyond what conventional media could achieve. Unlike traditional propaganda, which delivers a uniform message to all recipients, slopaganda can be micro-targeted — tailored to individuals based on estimated prior beliefs to reinforce political biases or emotional associations. The authors note that it need not aim at literal deception: much slopaganda is expressive rather than truth-apt, designed to create emotional associations rather than false factual beliefs. == Relation to AI slop == Slopaganda is a subset of AI slop — low-quality, mass-produced AI-generated content — distinguished by intent. Where AI slop may be produced indifferently for commercial or engagement-farming purposes, slopaganda is deployed with a deliberate political or ideological goal. == Notable examples == Examples discussed by the term's originators include Donald Trump's prolific use of AI in Truth Social posts and Iranian Lego-themed music videos. AI-generated videos posted by the White House mixing real military footage with clips from films and video games; and deepfake audio imitating political candidates during the 2024 US presidential campaign have also been given the label slopaganda.

    Read more →
  • Hyper-encryption

    Hyper-encryption

    Hyper-encryption is a form of encryption invented by Michael O. Rabin which uses a high-bandwidth source of public random bits, together with a secret key that is shared by only the sender and recipient(s) of the message. It uses the assumptions of Ueli Maurer's bounded-storage model as the basis of its secrecy. Although everyone can see the data, decryption by adversaries without the secret key is still not feasible, because of the space limitations of storing enough data to mount an attack against the system. Unlike almost all other cryptosystems except the one-time pad, hyper-encryption can be proved to be information-theoretically secure, provided the storage bound cannot be surpassed. Moreover, if the necessary public information cannot be stored at the time of transmission, the plaintext can be shown to be impossible to recover, regardless of the computational capacity available to an adversary in the future, even if they have access to the secret key at that future time. A highly energy-efficient implementation of a hyper-encryption chip was demonstrated by Krishna Palem et al. using the Probabilistic CMOS or PCMOS technology and was shown to be ~205 times more efficient in terms of Energy-Performance-Product.

    Read more →
  • Data monetization

    Data monetization

    Data monetization, a form of monetization, may refer to the act of generating measurable economic benefits from available data sources (analytics). Less commonly, it may also refer to the act of monetizing data services. In the case of analytics, typically, these benefits accrue as revenue or expense savings, but may also include market share or corporate market value gains. Data monetization leverages data generated through business operations, available exogenous data or content, as well as data associated with individual actors such as that collected via electronic devices and sensors participating in the internet of things. For example, the ubiquity of the internet of things is generating location data and other data from sensors and mobile devices at an ever-increasing rate. When this data is collated against traditional databases, the value and utility of both sources of data increases, leading to tremendous potential to mine data for social good, research and discovery, and achievement of business objectives. Closely associated with data monetization are the emerging data as a service models for transactions involving data by the data item. There are three ethical and regulatory vectors involved in data monetization due to the sometimes conflicting interests of actors involved in the digital supply chain. The individual data creator who generates files and records through his own efforts or owns a device such as a sensor or a mobile phone that generates data has a claim to ownership of data. The business entity that generates data in the course of its operations, such as its transactions with financial institutions or risk factors discovered through feedback from customers also has a claim on data captured through their systems and platforms. However, the person that contributed the data may also have a legitimate claim on the data. Internet platforms and service providers, such as Google or Facebook that require a user to forgo some ownership interest in their data in exchange for use of the platform also have a legitimate claim on the data. Thus the practice of data monetization, although common since 2000, is now getting increasing attention from regulators. The European Union and the United States Congress have begun to address these issues. For instance, in the financial services industry, regulations involving data are included in the Gramm–Leach–Bliley Act and Dodd-Frank. Some individual creators of data are shifting to using personal data vaults and implementing vendor relationship management concepts as a reflection of an increasing resistance to their data being federated or aggregated and resold without compensation. Groups such as the Personal Data Ecosystem Consortium, Patient privacy rights, and others are also challenging corporate cooptation of data without compensation. Financial services companies are a relatively good example of an industry focused on generating revenue by leveraging data. Credit card issuers and retail banks use customer transaction data to improve targeting of cross-sell offers. Partners are increasingly promoting merchant based reward programs which leverage a bank’s data and provide discounts to customers at the same time. == Types of data monetization == Internal data monetization - An organization's data is used internally, resulting in economic benefit. This is commonly the case in organizations using analytics to uncover insights, resulting in improved profit, cost savings or the avoidance of risk. Internal data monetization is currently the most common form of monetization, requiring far fewer security, intellectual property, and legal precautions when compared to other types. The potential economic gains from this type of data monetization are limited by the organization's internal structure and situation. External data monetization - A person or organization makes data they possess available on a for-fee basis to external parties, or as a broker for same. This type of monetization is less common and requires various methods to distribute the data to potential buyers and consumers. However, the economic gain that results from collecting data, packaging and distributing it, can be quite large. == Steps == Identification of available data sources – this includes data currently available for monetization as well as other external data sources that may enhance the value of what’s currently available. Connect, aggregate, attribute, validate, authenticate, and exchange data - this allows data to be converted directly into actionable or revenue generating insight or services. Set terms and prices and facilitate data trading - methods for data vetting, storage, and access. For example, many global corporations have locked and siloed data storage infrastructures, which hinders efficient access to data and cooperative and real-time exchange. Perform Research and analytics – draw predictive insights from existing data as a basis for using data for to reduce risk, enhance product development or performance, or improve customer experience or business outcomes. Action and leveraging – the last phase of monetizing data includes determining alternative or improved data centric products, ideas, or services. Examples may include real-time actionable triggered notifications or enhanced channels such as web or mobile response mechanisms. == Pricing variables and factors == A fee for use of a platform to connect buyers and sellers use of a platform to configure, organize, and otherwise process data included in a data trade connecting or including a device or sensor into a data supply chain connecting and credentialing a creator of a data source and a data buyer – often through a federated identity connecting a data source to other data sources to be included in a data supply chain use of an internet service or other transmission services for uploading and downloading data – sometimes, for an individual, through a personal cloud use of encrypted keys to achieve secure data transfer use of a search algorithm specifically designed to tag data sources that contain data points of value to the data buyer linking a data creator or generator to a data collection protocol or form server actions – such as a notification – triggered by an update to a data item or data source included in a data supply chain A price or exchange or other trade value assigned by a data creator or generator to a data item or a data source offered by a data buyer to a data creator assigned by a data buyer for a data item or a data source formatted according to criteria set by a data buyer An incremental fee assigned by a data buyer for a data item or a data set scaled to the reputation of the data creator == Benefits == Improved decision-making that leads to real time crowd sourced research, improved profits, decreased costs, reduced risk and improved compliance More impactful decisions (e.g., make real-time decisions) More timely (lower latency) decisions (e.g., a vendor making purchase recommendations while the customer is still on the phone or in the store, a customer connecting with multiple vendors to discover the best price, triggered notifications when thresholds are reached for data values) More granular decisions (e.g., localized pricing decisions at an individual or device or sensor level versus larger aggregates). Targeted Marketing (e.g., Vendors with access to big data can make targeted advertisements to specific customers within a set data pool decreasing costs for the advertiser and reaching most interested customers) == Frameworks == There are a wide variety of industries, firms and business models related to data monetization. The following frameworks have been offered to help understand the types of business models that are used: Roger Ehrenberg of IA Ventures, a venture capital firm that invests in this sector, has defined three basic types of data product firms: Contributory databases. The magic of these businesses is that a customer provides their own data in exchange for receiving a more robust set of aggregated data back that provides insight into the broader marketplace, or provides a vehicle for expressing a view. Give a little, get a lot back in return – a pretty compelling value proposition, and one that frequently results in a payment from the data contributor in exchange for receiving enriched, aggregated data. Once these contributory databases are developed and customers become reliant on their insights, they become extremely valuable and persistent data assets. Data processing platforms. These businesses create barriers through a combination of complex data architectures, proprietary algorithms, and rich analytics to help customers consume data in whatever form they please. Often these businesses have special relationships with key data providers, that when combined with other data and processed as a whole create valuable differentiation and competitive barriers. Bloomberg is an example of a powerful

    Read more →