AI Chatbot Development

AI Chatbot Development — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Deep tomographic reconstruction

  Deep Tomographic Reconstruction is a set of methods for using deep learning methods to perform tomographic reconstruction of medical and industrial images. It uses artificial intelligence and machine learning, especially deep artificial neural networks or deep learning, to overcome challenges such as measurement noise, data sparsity, image artifacts, and computational inefficiency. This approach has been applied across various imaging modalities, including CT, MRI, PET, SPECT, ultrasound, and optical imaging == Historical background == Traditional tomographic reconstruction relies on analytic methods such as filtered back-projection, or iterative methods which incrementally compute inverse transformations from measurement data (e.g., Radon or Fourier transform data). However, these approaches are not sufficient for certain imaging techniques such as low-dose CT and fast MRI, or scenarios involving metal artifacts and patient motion. == Use in imaging modalities == === Computed tomography (CT) === In CT, deep learning models can be particularly effective in reducing radiation exposure while maintaining image quality. Deep neural networks can also be able to reconstruct images of fair quality from sparsely sampled data without sacrificing diagnostic performance. Deep learning-based generative AI models can reduce CT metal artifacts. === Magnetic resonance imaging (MRI) === In magnetic resonance imaging (MRI), deep learning can lead to reduced MRI motion artifacts, and increased acquisition speed, referred to as fast MRI. Despite suffering from disadvantages such as lower signal-to-noise ratio (SNR), deep learning can enhance image quality in low field MRI, making these systems clinically viable. === Positron emission tomography (PET) and single-photon emission CT (SPECT) === For PET imaging, deep learning models can provide substantial improvements in low-dose imaging and motion artifact correction. Also, deep learning can help SPECT for generation of attenuation background. A notable technique for PET denoising involves integrating MR data through multimodal networks, which use anatomical information from MRI to enhance PET image quality. === Ultrasound imaging === Deep learning can enhance ultrasound imaging by reducing speckle noise and motion blur. For ultrasound beamforming, deep neural networks can allow superior image quality with limited data at high speed. === Optical imaging and microscopy === Diffuse optical tomography, optical coherence tomography and microscopy can be improved by deep neural networks beyond traditional methods. Furthermore, deep learning can also enhance Photoacoustic imaging (see Deep learning in photoacoustic imaging), addressing challenges like high noise, low contrast, and limited resolution. Deep learning has also been applied to label-free live-cell imaging, where convolutional neural networks predict fluorescence labels from transmitted light images, a technique known as in silico labeling. This method can enable high-throughput, non-invasive cell analysis and phenotyping without the need for traditional fluorescent dyes.

  Read more →
• 

  Data marketplace

  Data marketplace is an online platform for sharing and consuming data in the form of data assets or data products. Part of the data management stack, it aims to bring together data producers and data consumers (including business users and AI) in a single space, with the objective of increasing access to understandable, high-quality data. Included within its Data Marketplaces and Exchange (DME) category by Gartner, data marketplaces can provide data internally within an organization, externally with partners, or as open data. == Concept == Digitization has dramatically increased data volumes within organizations, with IDC predicting that by 2025 the world will contain 175 zettabytes of data. This has created a need to both manage this data and provide access to it to enable business intelligence and data analysis. However, data is often scattered within multiple systems (such as data warehouses and data lakes), and is in formats that are only understandable by technical experts, such as data scientists. According to IDC, 81% of IT leaders cite data silos as a major barrier to digital transformation. This means that data is not freely available to business users or external audiences such as partners or citizens, limiting its value, and holding back AI deployments. Data marketplaces solve this issue, providing seamless, self-service access to high-quality data in an understandable, secure and auditable manner. They break down data silos, reduce friction in data access, and enable a broader range of users, including non-technical profiles, to find, understand, and consume data autonomously. Data assets on the marketplace can be raw data, data visualizations or data products. Data marketplaces combine data management functions such as data governance with the user-friendly experience offered by e-commerce marketplaces in order to increase the usage of data. These include features such as powerful search engines, feedback, ratings, subscriptions and product description sheets. According to Gartner, data marketplaces provide infrastructure, transactional capabilities, and services for both consumers and providers of data assets. == History and timeline == Data marketplaces have evolved since they first emerged in terms of both their scope and usage. === 2000s === With the rise of the internet, data brokers began collecting, aggregating, distributing and selling personal, financial and marketing data to third parties online. Data marketplaces were deployed to monetize this data, making it discoverable and accessible to users, either through subscriptions or one-off purchases. At the same time, regulations, such as the US Open Government Initiative of 2009 and others around the world mandated greater transparency and data sharing with the public. Data sharing portals were created by public and government bodies to make this information available through self-service to all users. === 2010s === Due to the growth of big data and cloud platforms, cloud-based data exchange platforms emerged. These were offered by major infrastructure providers, and included Amazon Web Services (AWS) Data Exchange, Snowflake Data Marketplace, and the Google Cloud Platform. These platforms moved beyond simple data brokerage or open data by providing structured, catalogued data sharing between organizations. === 2020s === Driven by a need to increase internal data sharing with both business users and AI, organizations are now looking to adopt internal data marketplaces. These aim to democratize data consumption by providing seamless access for all employees and AI to trusted data, including data products, through an intuitive, e-commerce style experience. According to Gartner analyst Richa Jha, "by providing a single, governed platform for discovering, sharing, and scaling data products, data marketplaces drive productivity, collaboration, and ROI across the enterprise." == Data marketplaces within the overall data architecture == Data marketplaces provide a consumption and collaboration layer for data. That means they complement and integrate with other parts of the overall data architecture, including: === Data warehouses and data lakes === Data marketplaces connect to data sources, such as data warehouses or data lakes, to provide intuitive access to the data stored within them, enabling data to be shared and distributed to non-technical audiences. Access can be direct, with data and data products stored within the data marketplace or virtualized. === Data catalog === A data catalog provides a technical inventory of an organization's data estate. It collects technical information on all available data assets within an organization, based on metadata descriptions. This ensures traceability, and supports compliance and governance requirements. Unlike a data marketplace, a data catalog does not provide access to data, and is designed to be used by data professionals, rather than the business. This means it lacks an intuitive, understandable interface and is consequently not easily accessible by business users. === Data mesh === Data mesh is an architecture and framework for data management, first defined by Zhamak Dehghani in 2019. It aims to decentralize data ownership to delegate responsibility, empowering teams and focusing on delivering data to users in the form of self-service data products. The data marketplace is a central pillar of data mesh, providing intuitive access to these data products, and creating a collaboration space for data owners and data consumers. === Data product === Data products are high-value, consumable data assets that package high-quality data and associated tools to enable seamless usage by business users at scale. First defined by McKinsey in 2022, they have an identified owner, a service level agreement (SLA), and a reusability logic. == Core components of a data marketplace == A data marketplace typically includes specific core components: === E-commerce style interface === An e-commerce style experience that engages non-technical users, minimizes the need for training and builds confidence and trust in data. Look and feel should be customizable to incorporate corporate design guidelines to ensure consistency with other organizational applications. === Built-in data catalog === As in a standalone data catalog, this indexes all available data, based on metadata that includes type, source, owner, freshness, and quality level. === Discovery and search engine === This enables users to search, filter, explore and discover available data intuitively. As in an e-commerce marketplace, it should be intelligent, and provide relevant results based on natural language queries. === Access control and security management === Data marketplaces will contain data that needs to be protected under regulations such as the General Data Protection Regulation (GDPR) in Europe, the California Consumer Privacy Act (CCPA) in the United States, and sector-specific frameworks in industries such as finance and healthcare. To ensure both security and compliance while maximizing data consumption, the data marketplace should include granular access management and a full audit trail. === Semantic layer and business glossary === Different parts of the business are likely to use different terms to describe data. This leads to inconsistencies and an inability to share data across systems and teams. The semantic layer and business glossary standardize a shared vocabulary and common definitions of business indicators and concepts, providing a single language for data across the business and for AI agents. === Data governance mechanisms === These enforce corporate data governance policies, ensuring data traceability through data lineage, quality certification, usage monitoring, and continuous improvement through user feedback loops. === Collaboration features === As on an e-commerce website, a data marketplace should provide collaboration features that bring together data users and data owners. This includes the ability to rate data products, share use cases, and provide feedback to data owners, creating a community around data and supporting a data-driven culture. == Types of data marketplace == While they share the same underlying technology, data marketplaces can be deployed in three broad ways: === Internal data marketplaces === These bring together data from across an organization and make it available via self-service to employees from across the business. They aim to widen access to data and consequently to improve decision-making and reporting, increase performance and maximize efficiency. === Ecosystem data marketplaces === These extend sharing beyond a single organization, enabling multiple partners (public institutions, industry players, research bodies) to share and consume data within a governed framework. Data can be provided by all parties or simply by one organization and consumed by others. Ecosystem data marketplaces are particularly relevant in

  Read more →
• 

  Sumazi

  Sumazi is a social media and social intelligence platform for enterprises, brands, and celebrities. Its technology performs social data analysis across social networking services including Facebook, Twitter and LinkedIn, to identify key people in his/her network who are experts, influencers or are located in a specific area for marketing, advertising or sales campaigns. The technology company was founded in 2011 by former Sun Microsystems employee Sumaya Kazi. The company was headquartered in San Francisco, California. The company was out of business by 2017. == Reception == Sumazi was one of 25 startups selected out of more than 1,200 to compete at TechCrunch Disrupt Startup Battlefield, where it won the Omidyar Network award for the startup "Most Likely to Change the World." Sumazi, which was based out of San Francisco, California, had been profiled in The New York Times as well as USA Today, which commented the advantages of the startup's location in the Silicon Valley. American Express OPEN Forum also featured Sumazi as a "Startup of the Week". Sumazi has additionally been mentioned in articles by Mashable, The Wall Street Journal, Current Editorials, Harvard Business Review, Smashing Magazine, and TechCrunch.

  Read more →
• 

  Information Networking Institute

  Information Networking Institute (INI) is an academic department within the College of Engineering at Carnegie Mellon University. The institute was established in 1989 as the nation's first research and education center devoted to information networking. The INI also partners with research and outreach entities to extend educational and training programs to a broad audience of people using information networking as part of their daily lives. The INI is the educational partner of Carnegie Mellon CyLab, a university-wide, multidisciplinary research center involving more than 50 faculty and 100 graduate students. == Center of Academic Excellence Designations == Through the work of the INI and CyLab, Carnegie Mellon University has been designated by the National Security Agency and the Department of Homeland Security as a National Center of Academic Excellence in Information Assurance/Cyber Defense Education (CAE-IA/CD) and a National Center of Academic Excellence in Information Assurance/Cyber Defense Research (CAE-R). It has also been designated by the NSA and the U.S. Cyber Command as a National Center of Academic Excellence in Cyber Operations (CAE-Cyber Ops). Through these designations, the INI and CyLab participate in the: Federal CyberCorps Scholarship for Service (SFS) Program - Students pursuing graduate degrees in information security (MSIS or MSISPM) are eligible for scholarships under the SFS program. Information Assurance Scholarship Program (IASP) - Students pursuing graduate degrees in information security and seeking careers with the Department of Defense may be eligible for scholarships under the IASP. Capacity Building Program for Faculty from Historically Black and Hispanic Serving Institutions - The INI and CyLab developed a month-long, in-residence summer program to help build information assurance education and research capacity at colleges and universities designated as Minority Serving Institutions – specifically, Historically Black Colleges and Universities (HBCUs) and Hispanic Serving Institutions (HSIs). This program is supported through a grant from the National Science Foundation. == Faculty and researchers == Faculty involved in teaching and advising in the INI programs are conducting research in all aspects of information networking and information security. Affiliated research centers are: Carnegie Mellon CyLab SEI's CERT Division == Alumni == The INI has graduated over 1,400 alumni who currently occupy positions in a variety of sectors across industry, government and academia.

  Read more →
• 

  List of large language models

  A large language model (LLM) is a type of machine learning model designed for natural language processing tasks such as language generation. LLMs are language models with many parameters, and are trained with self-supervised learning on a vast amount of text. == List == For the training cost column, 1 petaFLOP-day equals 1 petaFLOP/sec × 1 day, or 8.64×1019 FLOP (floating point operations). Only the cost of the largest model is shown. The number of parameters is measured in billions, and the training cost is measured in petaFLOP-days. === 2018 === === 2019 === === 2020 === === 2021 === === 2022 === === 2023 === === 2024 === === 2025 === === 2026 ===

  Read more →
• 

  Factorization of polynomials over finite fields

  In mathematics and computer algebra the factorization of a polynomial consists of decomposing it into a product of irreducible factors. This decomposition is theoretically possible and is unique for polynomials with coefficients in any field, but rather strong restrictions on the field of the coefficients are needed to allow the computation of the factorization by means of an algorithm. In practice, algorithms have been designed only for polynomials with coefficients in a finite field, in the field of rationals or in a finitely generated field extension of one of them. All factorization algorithms, including the case of multivariate polynomials over the rational numbers, reduce the problem to this case; see polynomial factorization. It is also used for various applications of finite fields, such as coding theory (cyclic redundancy codes and BCH codes), cryptography (public key cryptography by the means of elliptic curves), and computational number theory. As the reduction of the factorization of multivariate polynomials to that of univariate polynomials does not have any specificity in the case of coefficients in a finite field, only polynomials with one variable are considered in this article. == Background == === Finite field === The theory of finite fields, whose origins can be traced back to the works of Gauss and Galois, has played a part in various branches of mathematics. Due to the applicability of the concept in other topics of mathematics and sciences like computer science there has been a resurgence of interest in finite fields and this is partly due to important applications in coding theory and cryptography. Applications of finite fields introduce some of these developments in cryptography, computer algebra and coding theory. A finite field or Galois field is a field with a finite order (number of elements). The order of a finite field is always a prime or a power of prime. For each prime power q = pr, there exists exactly one finite field with q elements, up to isomorphism. This field is denoted GF(q) or Fq. If p is prime, GF(p) is the prime field of order p; it is the field of residue classes modulo p, and its p elements are denoted 0, 1, ..., p−1. Thus a = b in GF(p) means the same as a ≡ b (mod p). === Irreducible polynomials === Let F be a finite field. As for general fields, a non-constant polynomial f in F[x] is said to be irreducible over F if it is not the product of two polynomials of positive degree. A polynomial of positive degree that is not irreducible over F is called reducible over F. Irreducible polynomials allow us to construct the finite fields of non-prime order. In fact, for a prime power q, let Fq be the finite field with q elements, unique up to isomorphism. A polynomial f of degree n greater than one, which is irreducible over Fq, defines a field extension of degree n which is isomorphic to the field with qn elements: the elements of this extension are the polynomials of degree lower than n; addition, subtraction and multiplication by an element of Fq are those of the polynomials; the product of two elements is the remainder of the division by f of their product as polynomials; the inverse of an element may be computed by the extended GCD algorithm (see Arithmetic of algebraic extensions). It follows that, to compute in a finite field of non prime order, one needs to generate an irreducible polynomial. For this, the common method is to take a polynomial at random and test it for irreducibility. For sake of efficiency of the multiplication in the field, it is usual to search for polynomials of the shape xn + ax + b. Irreducible polynomials over finite fields are also useful for pseudorandom number generators using feedback shift registers and discrete logarithm over F2n. The number of irreducible monic polynomials of degree n over Fq is the number of aperiodic necklaces, given by Moreau's necklace-counting function Mq(n). The closely related necklace function Nq(n) counts monic polynomials of degree n which are primary (a power of an irreducible); or alternatively irreducible polynomials of all degrees d which divide n. === Example === The polynomial P = x4 + 1 is irreducible over Q but not over any finite field. On any field extension of F2, P = (x + 1)4. On every other finite field, at least one of −1, 2 and −2 is a square, because the product of two non-squares is a square and so we have If − 1 = a 2 , {\displaystyle -1=a^{2},} then P = ( x 2 + a ) ( x 2 − a ) . {\displaystyle P=(x^{2}+a)(x^{2}-a).} If 2 = b 2 , {\displaystyle 2=b^{2},} then P = ( x 2 + b x + 1 ) ( x 2 − b x + 1 ) . {\displaystyle P=(x^{2}+bx+1)(x^{2}-bx+1).} If − 2 = c 2 , {\displaystyle -2=c^{2},} then P = ( x 2 + c x − 1 ) ( x 2 − c x − 1 ) . {\displaystyle P=(x^{2}+cx-1)(x^{2}-cx-1).} === Complexity === Polynomial factoring algorithms use basic polynomial operations such as products, divisions, gcd, powers of one polynomial modulo another, etc. A multiplication of two polynomials of degree at most n can be done in O(n2) operations in Fq using "classical" arithmetic, or in O(nlog(n) log(log(n)) ) operations in Fq using "fast" arithmetic. A Euclidean division (division with remainder) can be performed within the same time bounds. The cost of a polynomial greatest common divisor between two polynomials of degree at most n can be taken as O(n2) operations in Fq using classical methods, or as O(nlog2(n) log(log(n)) ) operations in Fq using fast methods. For polynomials h, g of degree at most n, the exponentiation hq mod g can be done with O(log(q)) polynomial products, using exponentiation by squaring method, that is O(n2log(q)) operations in Fq using classical methods, or O(nlog(q)log(n) log(log(n))) operations in Fq using fast methods. In the algorithms that follow, the complexities are expressed in terms of number of arithmetic operations in Fq, using classical algorithms for the arithmetic of polynomials. == Factoring algorithms == Many algorithms for factoring polynomials over finite fields include the following three stages: Square-free factorization Distinct-degree factorization Equal-degree factorization An important exception is Berlekamp's algorithm, which combines stages 2 and 3. === Berlekamp's algorithm === Berlekamp's algorithm is historically important as being the first factorization algorithm which works well in practice. However, it contains a loop on the elements of the ground field, which implies that it is practicable only over small finite fields. For a fixed ground field, its time complexity is polynomial, but, for general ground fields, the complexity is exponential in the size of the ground field. === Square-free factorization === The algorithm determines a square-free factorization for polynomials whose coefficients come from the finite field Fq of order q = pm with p a prime. This algorithm firstly determines the derivative and then computes the gcd of the polynomial and its derivative. If it is not one then the gcd is again divided into the original polynomial, provided that the derivative is not zero (a case that exists for non-constant polynomials defined over finite fields). This algorithm uses the fact that, if the derivative of a polynomial is zero, then it is a polynomial in xp, which is, if the coefficients belong to Fp, the pth power of the polynomial obtained by substituting x by x1/p. If the coefficients do not belong to Fp, the pth root of a polynomial with zero derivative is obtained by the same substitution on x, completed by applying the inverse of the Frobenius automorphism to the coefficients. This algorithm works also over a field of characteristic zero, with the only difference that it never enters in the blocks of instructions where pth roots are computed. However, in this case, Yun's algorithm is much more efficient because it computes the greatest common divisors of polynomials of lower degrees. A consequence is that, when factoring a polynomial over the integers, the algorithm which follows is not used: one first computes the square-free factorization over the integers, and to factor the resulting polynomials, one chooses a p such that they remain square-free modulo p. Algorithm: SFF (Square-Free Factorization) Input: A monic polynomial f in Fq[x] where q = pm Output: Square-free factorization of f R ← 1 # Make w be the product (without multiplicity) of all factors of f that have # multiplicity not divisible by p c ← gcd(f, f′) w ← f/c # Step 1: Identify all factors in w i ← 1 while w ≠ 1 do y ← gcd(w, c) fac ← w / y R ← R · faci w ← y; c ← c / y; i ← i + 1 end while # c is now the product (with multiplicity) of the remaining factors of f # Step 2: Identify all remaining factors using recursion # Note that these are the factors of f that have multiplicity divisible by p if c ≠ 1 then c ← c1/p R ← R·SFF(c)p end if Output(R) The idea is to identify the product of all irreducible factors of f with the same multiplicity. This is done in two steps. The first step uses the formal d

  Read more →
• 

  Electronic lab notebook

  An electronic lab notebook or electronic laboratory notebook (ELN) is a computer program designed to replace paper laboratory notebooks. Lab notebooks in general are used by scientists, engineers, and technicians to document research, experiments, and procedures performed in a laboratory. A lab notebook is often maintained to be a legal document and may be used in a court of law as evidence. Similar to an inventor's notebook, the lab notebook is also often referred to in patent prosecution and intellectual property litigation. Electronic lab notebooks offer many benefits to the user as well as organizations; they are easier to search upon, simplify data copying and backups, and support collaboration amongst many users. ELNs can have fine-grained access controls, and can be more secure than their paper counterparts. They also allow the direct incorporation of data from instruments, replacing the practice of printing out data to be stapled into a paper notebook. == Types == ELNs can be divided into two categories: "Specific ELNs" contain features designed to work with specific applications, scientific instrumentation or data types. "Cross-disciplinary ELNs" or "Generic ELNs" are designed to support access to all data and information that needs to be recorded in a lab notebook. Lab Platforms that combine an ELN, LIMS, and scientific data management together, all-in-one configurable software environment. Solutions range from specialized programs designed from the ground up for use as an ELN, to modifications or direct use of more general programs. Examples of using more general software as an ELN include using OpenWetWare, a MediaWiki install (running the same software that Wikipedia uses), WordPress, or the use of general note taking software such as OneNote as an ELN. ELN's come in many different forms. They can be standalone programs, use a client-server model, or be entirely web-based. Some use a lab-notebook approach, others resemble a blog. ELNs are embracing artificial intelligence and LLM technology to provide scientific AI chat assistants. A good many variations on the "ELN" acronym have appeared. Differences between systems with different names are often subtle, with considerable functional overlap between them. Examples include "ERN" (Electronic Research Notebook), "ERMS" (Electronic Resource (or Research or Records) Management System (or Software) and SDMS (Scientific Data (or Document) Management System (or Software). Ultimately, these types of systems all strive to do the same thing: Capture, record, centralize and protect scientific data in a way that is highly searchable, historically accurate, and legally stringent, and which also promotes secure collaboration, greater efficiency, reduced mistakes and lowered total research costs. == Objectives == A good electronic laboratory notebook should offer a secure environment to protect the integrity of both data and process, whilst also affording the flexibility to adopt new processes or changes to existing processes without recourse to further software development. The package architecture should be a modular design, so as to offer the benefit of minimizing validation costs of any subsequent changes that you may wish to make in the future as your needs change. A good electronic laboratory notebook should be an "out of the box" solution that, as standard, has fully configurable forms to comply with the requirements of regulated analytical groups through to a sophisticated ELN for inclusion of structures, spectra, chromatograms, pictures, text, etc. where a preconfigured form is less appropriate. All data within the system may be stored in a database (e.g. MySQL, MS-SQL, Oracle) and be fully searchable. The system should enable data to be collected, stored and retrieved through any combination of forms or ELN that best meets the requirements of the user. The application should enable secure forms to be generated that accept laboratory data input via PCs and/or laptops / palmtops, and should be directly linked to electronic devices such as laboratory balances, pH meters, etc. Networked or wireless communications should be accommodated for by the package which will allow data to be interrogated, tabulated, checked, approved, stored and archived to comply with the latest regulatory guidance and legislation. A system should also include a scheduling option for routine procedures such as equipment qualification and study related timelines. It should include configurable qualification requirements to automatically verify that instruments have been cleaned and calibrated within a specified time period, that reagents have been quality-checked and have not expired, and that workers are trained and authorized to use the equipment and perform the procedures. == Regulatory and legal aspects == The laboratory accreditation criteria found in the ISO 17025 standard needs to be considered for the protection and computer backup of electronic records. These criteria can be found specifically in clause 4.13.1.4 of the standard. Electronic lab notebooks used for development or research in regulated industries, such as medical devices or pharmaceuticals, are expected to comply with FDA regulations related to software validation. The purpose of the regulations is to ensure the integrity of the entries in terms of time, authorship, and content. Unlike ELNs for patent protection, FDA is not concerned with patent interference proceedings, but is concerned with avoidance of falsification. Typical provisions related to software validation are included in the medical device regulations at 21 CFR 820 (et seq.) and Title 21 CFR Part 11. Essentially, the requirements are that the software has been designed and implemented to be suitable for its intended purposes. Evidence to show that this is the case is often provided by a Software Requirements Specification (SRS) setting forth the intended uses and the needs that the ELN will meet; one or more testing protocols that, when followed, demonstrate that the ELN meets the requirements of the specification and that the requirements are satisfied under worst-case conditions. Security, audit trails, prevention of unauthorized changes without substantial collusion of otherwise independent personnel (i.e., those having no interest in the content of the ELN such as independent quality unit personnel) and similar tests are fundamental. Finally, one or more reports demonstrating the results of the testing in accordance with the predefined protocols are required prior to release of the ELN software for use. If the reports show that the software failed to satisfy any of the SRS requirements, then corrective and preventive action ("CAPA") must be undertaken and documented. Such CAPA may extend to minor software revisions, or changes in architecture or major revisions. CAPA activities need to be documented as well. Aside from the requirements to follow such steps for regulated industry, such an approach is generally a good practice in terms of development and release of any software to assure its quality and fitness for use. There are standards related to software development and testing that can be applied (see ref.).

  Read more →
• 

  Cipher device

  A cipher device was a term used by the US military in the first half of the 20th century to describe a manually operated cipher equipment that converted the plaintext into ciphertext or vice versa. A similar term, cipher machine, was used to describe the cipher equipment that required external power for operation. Cipher box or crypto box is a physical cryptographic device used to encrypt and decrypt messages between plaintext (unencrypted) and ciphertext (encrypted or secret) forms. The ciphertext is suitable for transmission over a channel, such as radio, that might be observed by an adversary the communicating parties wish to conceal the plaintext from.

  Read more →
• 

  Color moments

  Color moments are measures that characterise color distribution in an image in the same way that central moments uniquely describe a probability distribution. Color moments are mainly used for color indexing purposes as features in image retrieval applications in order to compare how similar two images are based on color. Usually one image is compared to a database of digital images with pre-computed features in order to find and retrieve a similar Image. Each comparison between images results in a similarity score, and the lower this score is the more identical the two images are supposed to be. == Overview == Color moments are scaling and rotation invariant. It is usually the case that only the first three color moments are used as features in image retrieval applications as most of the color distribution information is contained in the low-order moments. Since color moments encode both shape and color information they are a good feature to use under changing lighting conditions, but they cannot handle occlusion very successfully. Color moments can be computed for any color model. Three color moments are computed per channel (e.g. 9 moments if the color model is RGB and 12 moments if the color model is CMYK). Computing color moments is done in the same way as computing moments of a probability distribution. === Mean === The first color moment can be interpreted as the average color in the image, and it can be calculated by using the following formula E i = ∑ j = 1 N 1 N p i j {\displaystyle E_{i}=\textstyle \sum _{j=1}^{N}{\frac {1}{N}}p_{ij}} where N is the number of pixels in the image and p i j {\displaystyle p_{ij}} is the value of the j-th pixel of the image at the i-th color channel. === Standard Deviation === The second color moment is the standard deviation, which is obtained by taking the square root of the variance of the color distribution. σ i = ( 1 N ∑ j = 1 N ( p i j − E i ) 2 ) {\displaystyle \sigma _{i}={\sqrt {({\frac {1}{N}}\textstyle \sum _{j=1}^{N}(p_{ij}-E_{i})^{2})}}} where E i {\displaystyle E_{i}} is the mean value, or first color moment, for the i-th color channel of the image. === Skewness === The third color moment is the skewness. It measures how asymmetric the color distribution is, and thus it gives information about the shape of the color distribution. Skewness can be computed with the following formula: s i = ( 1 N ∑ j = 1 N ( p i j − E i ) 3 ) 3 σ i {\displaystyle s_{i}={\frac {\sqrt[{3}]{\left({\frac {1}{N}}\textstyle \sum _{j=1}^{N}(p_{ij}-E_{i})^{3}\right)}}{\sigma _{i}}}} === Kurtosis === Kurtosis is the fourth color moment, and, similarly to skewness, it provides information about the shape of the color distribution. More specifically, kurtosis is a measure of how extreme the tails are in comparison to the normal distribution. === Higher-order color moments === Higher-order color moments are usually not part of the color moments feature set in image retrieval tasks as they require more data in order to obtain a good estimate of their value, and also the lower-order moments generally provide enough information. == Applications == Color moments have significant applications in image retrieval. They can be used in order to compare how similar two images are. This is a relatively new approach to color indexing. The greatest advantage of using color moments comes from the fact that there is no need to store the complete color distribution. This greatly speeds up image retrieval since there are less features to compare. In addition, the first three color moments have the same units, which allows for comparison between them. === Color indexing === Color indexing is the main application of color moments. Images can be indexed, and the index will contain the computed color moments. Then, if someone has a particular image and wants to find similar images in the database, the color moments of the image of interest will also be computed. After that the following function will be used in order to compute a similarity score between the image of interest and all the images in the database: d m o m ( H , I ) = ∑ i = 1 r w i 1 | E i 1 − E i 2 | + w i 2 | σ i 1 − σ i 2 | + w i 3 | s i 1 − s i 2 | {\displaystyle d_{mom}(H,I)=\textstyle \sum _{i=1}^{r}w_{i1}|E_{i}^{1}-E_{i}^{2}|+w_{i2}|\sigma _{i}^{1}-\sigma _{i}^{2}|+w_{i3}|s_{i}^{1}-s_{i}^{2}|} where: H and I are the color distributions of the two images that are being compared i is the channel index and r is the total number of channels E i 1 {\displaystyle E_{i}^{1}} and E i 2 {\displaystyle E_{i}^{2}} are the first order moments computed for the image distributions. σ i 1 {\displaystyle \sigma _{i}^{1}} and σ i 2 {\displaystyle \sigma _{i}^{2}} are the second order moments computed for the image distributions. s_i^1 and s_i^2 are the third order moments computed for the image distributions. w i 1 {\displaystyle w_{i1}} , w i 2 {\displaystyle w_{i2}} , and w i 3 {\displaystyle w_{i3}} are weights, specified by the user, for each of the three color moments used. Finally, the images in the database will be ranked according to the computed similarity score with the image of interest, and the database images with the lowest d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} value should be retrieved. "A retrieval based on d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} may produce false positives because the index contains no information about the correlation between the color channels". == Example == A simple and concise example of the use of color moments for image retrieval tasks is illustrated in. Consider having several test images in a database and a "New Image". The goal is to retrieve images from the database that are similar to the "New Image". The first three color moments are used as features. There are several steps in this computation. Image preprocessing (Optional) - The image preprocessing step of the computation process is optional. For example, in this step all images could be modified to be the same size (in terms of pixels). However, since color moments are invariant to scaling, it is not necessary to make all images the same width and height. Computing the features - Use the color moments formulae in order to compute the first three moments for each of the color channels in the image. For example, if the HSV color space is used, this means that for each of the images, 9 features in total will be computed (the first three order moments for the Hue, Saturation, and Value channels). Calculating the similarity score - After computing the color moments the weights for each of the moments in the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} function should be determined by the user. The weights have to be adjusted each time in accordance with the application or condition and quality of the images. Following that the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} function is used to calculate a similarity score for the "New Image" and each of the images in the database. Ranking and image retrieval - From the previous step the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} values were obtained. Now a comparison of these values can be made in order to decide which of the images in the database are more similar to the "New Image", and thus rank the database images accordingly. The smaller the d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} value is the more similar the two color distributions are supposed to be. Finally, some of the top ranked images (the ones with the smallest d m o m ( H , I ) {\displaystyle d_{mom}(H,I)} value) from the database are retrieved.

  Read more →
• 

  Knapsack problem

  The knapsack problem is the following problem in combinatorial optimization: Given a set of items, each with a weight and a value, determine which items to include in the collection so that the total weight is less than or equal to a given limit and the total value is as large as possible. It derives its name from the problem faced by someone who is constrained by a fixed-size knapsack and must fill it with the most valuable items. The problem often arises in resource allocation where the decision-makers have to choose from a set of non-divisible projects or tasks under a fixed budget or time constraint, respectively. The knapsack problem has been studied for more than a century, with early works dating back to 1897. The subset sum problem is a special case of the decision and 0-1 problems where for each kind of item, the weight equals the value: w i = v i {\displaystyle w_{i}=v_{i}} . In the field of cryptography, the term knapsack problem is often used to refer specifically to the subset sum problem. The subset sum problem is one of Karp's 21 NP-complete problems. == Applications == Knapsack problems appear in real-world decision-making processes in a wide variety of fields, such as finding the least wasteful way to cut raw materials, selection of investments and portfolios, selection of assets for asset-backed securitization, and generating keys for the Merkle–Hellman and other knapsack cryptosystems. One early application of knapsack algorithms was in the construction and scoring of tests in which the test-takers have a choice as to which questions they answer. For small examples, it is a fairly simple process to provide the test-takers with such a choice. For example, if an exam contains 12 questions each worth 10 points, the test-taker need only answer 10 questions to achieve a maximum possible score of 100 points. However, on tests with a heterogeneous distribution of point values, it is more difficult to provide choices. Feuerman and Weiss proposed a system in which students are given a heterogeneous test with a total of 125 possible points. The students are asked to answer all of the questions to the best of their abilities. Of the possible subsets of problems whose total point values add up to 100, a knapsack algorithm would determine which subset gives each student the highest possible score. A 1999 study of the Stony Brook University Algorithm Repository showed that, out of 75 algorithmic problems related to the field of combinatorial algorithms and algorithm engineering, the knapsack problem was the 19th most popular and the third most needed after suffix trees and the bin packing problem. == Definition == The most common problem being solved is the 0-1 knapsack problem, which restricts the number x i {\displaystyle x_{i}} of copies of each kind of item to zero or one. Given a set of n {\displaystyle n} items numbered from 1 up to n {\displaystyle n} , each with a weight w i {\displaystyle w_{i}} and a value v i {\displaystyle v_{i}} , along with a maximum weight capacity W {\displaystyle W} , maximize ∑ i = 1 n v i x i {\displaystyle \sum _{i=1}^{n}v_{i}x_{i}} subject to ∑ i = 1 n w i x i ≤ W {\displaystyle \sum _{i=1}^{n}w_{i}x_{i}\leq W} and x i ∈ { 0 , 1 } {\displaystyle x_{i}\in \{0,1\}} . Here x i {\displaystyle x_{i}} represents the number of instances of item i {\displaystyle i} to include in the knapsack. Informally, the problem is to maximize the sum of the values of the items in the knapsack so that the sum of the weights is less than or equal to the knapsack's capacity. The bounded knapsack problem (BKP) removes the restriction that there is only one of each item, but restricts the number x i {\displaystyle x_{i}} of copies of each kind of item to a maximum non-negative integer value c {\displaystyle c} : maximize ∑ i = 1 n v i x i {\displaystyle \sum _{i=1}^{n}v_{i}x_{i}} subject to ∑ i = 1 n w i x i ≤ W {\displaystyle \sum _{i=1}^{n}w_{i}x_{i}\leq W} and x i ∈ { 0 , 1 , 2 , … , c } . {\displaystyle x_{i}\in \{0,1,2,\dots ,c\}.} The unbounded knapsack problem (UKP) places no upper bound on the number of copies of each kind of item and can be formulated as above except that the only restriction on x i {\displaystyle x_{i}} is that it is a non-negative integer. maximize ∑ i = 1 n v i x i {\displaystyle \sum _{i=1}^{n}v_{i}x_{i}} subject to ∑ i = 1 n w i x i ≤ W {\displaystyle \sum _{i=1}^{n}w_{i}x_{i}\leq W} and x i ∈ N . {\displaystyle x_{i}\in \mathbb {N} .} One example of the unbounded knapsack problem is given using the figure shown at the beginning of this article and the text "if any number of each book is available" in the caption of that figure. == Computational complexity == The knapsack problem is interesting from the perspective of computer science for many reasons: The decision problem form of the knapsack problem (Can a value of at least V be achieved without exceeding the weight W?) is NP-complete, thus there is no known algorithm that is both correct and fast (polynomial-time) in all cases. There is no known polynomial algorithm which can tell, given a solution, whether it is optimal (which would mean that there is no solution with a larger V). This problem is co-NP-complete. There is a pseudo-polynomial time algorithm using dynamic programming. There is a fully polynomial-time approximation scheme, which uses the pseudo-polynomial time algorithm as a subroutine, described below. Many cases that arise in practice, and "random instances" from some distributions, can nonetheless be solved exactly. There is a link between the "decision" and "optimization" problems in that if there exists a polynomial algorithm that solves the "decision" problem, then one can find the maximum value for the optimization problem in polynomial time by applying this algorithm iteratively while increasing the value of k. On the other hand, if an algorithm finds the optimal value of the optimization problem in polynomial time, then the decision problem can be solved in polynomial time by comparing the value of the solution output by this algorithm with the value of k. Thus, both versions of the problem are of similar difficulty. One theme in research literature is to identify what the "hard" instances of the knapsack problem look like, or viewed another way, to identify what properties of instances in practice might make them more amenable than their worst-case NP-complete behaviour suggests. The goal in finding these "hard" instances is for their use in public-key cryptography systems, such as the Merkle–Hellman knapsack cryptosystem. More generally, better understanding of the structure of the space of instances of an optimization problem helps to advance the study of the particular problem and can improve algorithm selection. Furthermore, notable is the fact that the hardness of the knapsack problem depends on the form of the input. If the weights and profits are given as integers, it is weakly NP-complete, while it is strongly NP-complete if the weights and profits are given as rational numbers. However, in the case of rational weights and profits it still admits a fully polynomial-time approximation scheme. === Unit-cost models === The NP-hardness of the Knapsack problem relates to computational models in which the size of integers matters (such as the Turing machine). In contrast, decision trees count each decision as a single step. Dobkin and Lipton show an 1 2 n 2 {\displaystyle {1 \over 2}n^{2}} lower bound on linear decision trees for the knapsack problem, that is, trees where decision nodes test the sign of affine functions. This was generalized to algebraic decision trees by Steele and Yao. If the elements in the problem are real numbers or rationals, the decision-tree lower bound extends to the real random-access machine model with an instruction set that includes addition, subtraction and multiplication of real numbers, as well as comparison and either division or remaindering ("floor"). This model covers more algorithms than the algebraic decision-tree model, as it encompasses algorithms that use indexing into tables. However, in this model all program steps are counted, not just decisions. An upper bound for a decision-tree model was given by Meyer auf der Heide who showed that for every n there exists an O(n4)-deep linear decision tree that solves the subset-sum problem with n items. Note that this does not imply any upper bound for an algorithm that should solve the problem for any given n. == Solving == Several algorithms are available to solve knapsack problems, based on the dynamic programming approach, the branch and bound approach or hybridizations of both approaches. === Dynamic programming in-advance algorithm === The unbounded knapsack problem (UKP) places no restriction on the number of copies of each kind of item. Besides, here we assume that x i > 0 {\displaystyle x_{i}>0} m [ w ′ ] = max ( ∑ i = 1 n v i x i ) {\displaystyle m[w']=\max \left(\sum _{i=1}^{n}v_{i}x_{i}\right)} subject to ∑

  Read more →
• 

  Radical trust

  Radical trust is the confidence that any structured organization, such as a government, library, business, religion, or museum, has in collaboration and empowerment within online communities. Specifically, it pertains to the use of blogs, wiki and online social networking platforms by organizations to cultivate relationships with an online community that then can provide feedback and direction for the organization's interest. The organization 'trusts' and uses that input in its management. One of the first appearances of the notion of radical trust appears in an info graphic outlining the base principles of web 2.0 in Tim O'Reilly's weblog post "What is Web 2.0". Radical Trust is listed as the guiding example of trusting the validity of consumer generated media. This concept is considered to be an underlying assumption of Library 2.0. The adoption of radical trust by a library would require its management let go of some of its control over the library and building an organization without an end result in mind. The direction a library would take would be based on input provided by people through online communities. These changes in the organization may merely be anecdotal in nature, making this method of organization management dramatically distinct from data-based or evidence based management. In marketing, Collin Douma further describes the notion of radical trust as a key mindset required for marketers and advertisers to enter the social media marketing space. Conventional marketing dictates and maintains control of messages to cause the greatest persuasion in consumer decisions, but Douma argued that in the social media space, brands would need to cede that control in order to build brand loyalty.

  Read more →
• 

  G.9972

  G.9972 (also known as G.cx) is a Recommendation developed by ITU-T that specifies a coexistence mechanism for networking transceivers capable of operating over electrical power line wiring. It allows G.hn devices to coexist with other devices implementing G.9972 and operating on the same power line wiring. G.9972 received consent during the meeting of ITU-T Study Group 15, on October 9, 2009, and final approval on June 11, 2010. G.9972 specifies two mechanisms for coexistence between G.hn home networks and broadband over power lines (BPL) Internet access networks: Frequency-division multiplexing (FDM), in which the available spectrum is divided into two parts: frequencies below 10 or 14 MHz (specific value can be selected by the access network) are reserved for the access network, while frequencies above them are reserved for the in-home network. Time-division multiplexing (TDM), in which the available channel time is split equally between both networks. 50% of time slots are allocated for the access network, and 50% are allocated to the in-home network.

  Read more →
• 

  Parasolid

  Parasolid is a geometric modeling kernel originally developed by Shape Data Limited, now owned and developed by Siemens Digital Industries Software. It can be licensed by other companies for use in their 3D computer graphics software products. Parasolid's abilities include model creation and editing utilities such as Boolean modeling operators, feature modeling support, advanced surfacing, thickening and hollowing, blending and filleting, and sheet modeling. It also incorporates modeling with mesh surfaces and lattices. Parasolid also includes tools for direct model editing, including tapering, offsetting, geometry replacement and removing feature details with automated regeneration of surrounding data. Parasolid also provides wide-ranging graphical and rendering support, including hidden-line, wireframe and drafting, tessellation, and model data inquiries. To use Parasolid effectively, software developers need knowledge of CAD in general, computational geometry, and topology. Parasolid is available for Windows (32-bit, 64-bit and AArch64), Linux (64-bit and AArch64), macOS (Apple silicon and Intel), iOS, and Android. == Parasolid XT format == Parasolid parts are normally saved in XT format, which usually has the file extension .X_T. The format is documented and open. There is also a binary version of the format, usually with an .X_B extension, which is somewhat more compact. Both .X_T and .X_B are used for parts files. == Applications == It is used in many computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided engineering (CAE), product visualization, and CAD data exchange packages. Notable uses include:

  Read more →
• 

  Voice inversion

  Voice inversion scrambling is an analog method of obscuring the content of a transmission. It is sometimes used in public service radio, automobile racing, cordless telephones and the Family Radio Service. Without a descrambler, the transmission makes the speaker "sound like Donald Duck". Despite the term, the technique operates on the passband of the information and so can be applied to any information being transmitted. == Forms and details == There are various forms of voice inversion which offer differing levels of security. Overall, voice inversion scrambling offers little true security as software and even hobbyist kits are available from kit makers for scrambling and descrambling. The cadence of the speech is not changed. It is often easy to guess what is happening in the conversation by listening for other audio cues like questions, short responses and other language cadences. In the simplest form of voice inversion, the frequency p {\displaystyle p} of each component is replaced with s − p {\displaystyle s-p} , where s {\displaystyle s} is the frequency of a carrier wave. This can be done by amplitude modulating the speech signal with the carrier, then applying a low-pass filter to select the lower sideband. This will make the low tones of the voice sound like high ones and vice versa. This process also occurs naturally if a radio receiver is tuned to a single sideband transmission but set to decode the wrong sideband. There are more advanced forms of voice inversion which are more complex and require more effort to descramble. One method is to use a random code to choose the carrier frequency and then change this code in real time. This is called Rolling Code voice inversion and one can often hear the "ticks" in the transmission which signal the changing of the inversion point. Another method is split band voice inversion. This is where the band is split and then each band is inverted separately. A rolling code can also be added to this method for variable split band inversion (VSB). Common carrier frequencies are: 2.632 kHz, 2.718 kHz, 2.868 kHz, 3.023 kHz, 3.107 kHz, 3.196 kHz, 3.333 kHz, 3.339 kHz, 3.496 kHz, 3.729 kHz and 4.096 kHz. Voice inversion offers no security at all and software is available to restore the original voice, which is why it is no longer used to protect conversations today. However, voice inversion is still found in low-end Chinese walkie talkies.

  Read more →
• 

  Data steward

  A data steward is an oversight or data governance role within an organization, and is responsible for ensuring the quality and fitness for purpose of the organization's data assets, including the metadata for those data assets. A data steward may share some responsibilities with a data custodian, such as the awareness, accessibility, release, appropriate use, security and management of data. A data steward would also participate in the development and implementation of data assets. A data steward may seek to improve the quality and fitness for purpose of other data assets their organization depends upon but is not responsible for. Data stewards have a specialist role that utilizes an organization's data governance processes, policies, guidelines and responsibilities for administering an organizations' entire data in compliance with policy and/or regulatory obligations (e.g., GDPR, HIPAA). The overall objective of a data steward is the data quality of the data assets, datasets, data records and data elements. This includes documenting metainformation for the data, such as definitions, related rules/governance, physical manifestation, and related data models (most of these properties being specific to an attribute/concept relationship), identifying owners/custodian's various responsibilities, relations insight pertaining to attribute quality, aiding with project requirement data facilitation and documentation of capture rules. Data stewards begin the stewarding process with the identification of the data assets and elements which they will steward, with the ultimate result being standards, controls and data entry. The steward works closely with business glossary standards analysts (for standards), with data architect/modelers (for standards), with DQ analysts (for controls) and with operations team members (good-quality data going in per business rules) while entering data. Data stewardship roles are common when organizations attempt to exchange data precisely and consistently between computer systems and to reuse data-related resources. Master data management often makes references to the need for data stewardship for its implementation to succeed. Data stewardship must have precise purpose, fit for purpose or fitness. == Data steward responsibilities == A data steward ensures that each assigned data element: Has clear and unambiguous data element definition Does not conflict with other data elements in the metadata registry (removes duplicates, overlap etc.) Has clear enumerated value definitions if it is of type Code Is still being used (remove unused data elements) Is being used consistently in various computer systems Is being used, fit for purpose = Data Fitness Has adequate documentation on appropriate usage and notes Documents the origin and sources of authority on each metadata element Is protected against unauthorised access or change Responsibilities of data stewards vary between different organisations and institutions. For example, at Delft University of Technology, data stewards are perceived as the first contact point for any questions related to research data. They also have subject-specific background allowing them to easily connect with researchers and to contextualise data management problems to take into account disciplinary practices. == Types of data stewards == Depending on the set of data stewardship responsibilities assigned to an individual, there are 4 types (or dimensions of responsibility) of data stewards typically found within an organization: Data object data steward - responsible for managing reference data and attributes of one business data entity Business data steward - responsible for managing critical data, both reference and transactional, created or used by one business function. The data steward may also serve as a liaison between the organization's data users and technical teams, helping to bridge the gap between business needs and technical requirements. They may also play a role in educating others within the organization about best practices for data management, and advocating for data-driven decision-making. Process data steward - responsible for managing data across one business process System data steward - responsible for managing data for at least one IT system == Benefits of data stewardship == Systematic data stewardship can foster: Faster analysis Consistent use of data management resources Easy mapping of data between computer systems and exchange documents Lower costs associated with migration to (for example) service-oriented architecture (SOA) Mitigation of data risk Better control of dangers associated with privacy, legal, errors, etc. Assignment of each data element to a person sometimes seems like an unimportant process. But multiple groups have found that users have greater trust and usage rates in systems where they can contact a person with questions on each data element. == Examples == Delft University of Technology (TU Delft) offers an example of data stewardship implementation at a research institution. In 2017 the Data Stewardship Project was initiated at TU Delft to address research data management needs in a disciplinary manner across the whole campus. Dedicated data stewards with subject-specific background were appointed at every TU Delft faculty to support researchers with data management questions and to act as a linking point with the other institutional support services. The project is coordinated centrally by TU Delft Library, and it has its own website, blog and a YouTube channel. The [1]EPA metadata registry furnishes an example of data stewardship. Note that each data element therein has a "POC" (point of contact). In 2023, ETH Zurich launched the Data Stewardship Network (DSN) to facilitate collaboration among employees engaged in data management, analysis, and code development across research groups. The DSN serves as a platform for networking and knowledge exchange, aiming to professionalize the role of data stewards who support research data management and reproducible workflows. Established by the team for Research Data Management and Digital Curation at the ETH Library, the DSN collaborates with Scientific IT Services to provide expertise in areas such as storage infrastructure and reproducible workflows. == Data stewardship applications == Information stewardship applications are business solutions used by business users acting in the role of information steward (interpreting and enforcing information governance policy, for example). These developing solutions represent, for the most part, an amalgam of a number of disparate, previously IT-centric tools already on the market, but are organized and presented in such a way that information stewards (a business role) can support the work of information policy enforcement as part of their normal, business-centric, day-to-day work in a range of use cases. The initial push for the formation of this new category of packaged software came from operational use cases — that is, use of business data in and between transactional and operational business applications. This is where most of the master data management efforts are undertaken in organizations. However, there is also now a faster-growing interest in the new data lake arena for more analytical use cases.

  Read more →