AI Avatar Video Generator With Voice

AI Avatar Video Generator With Voice — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Army Chief Information Officer/G-6

In September 2020, the Army realigned the previously consolidated CIO/G-6 function into two separate roles, Office of the Chief Information Officer and Deputy Chief of Staff, G-6, that report to the secretary of the Army and chief of staff of the Army, respectively. The realignment came after several months of planning and coordination. Lt. Gen. John Morrison was nominated to the Senate for promotion and assignment as the G-6 and confirmed, assuming that position in August 2020. Subsequently, the Secretary of the Army, Ryan McCarthy appointed Dr. Raj G. Iyer as the first civilian Chief Information Officer, a career Senior Executive Service position in November 2020. == G-6 == Advise chief of staff of the Army and the Chief Information Officer on planning, fielding, and execution of C4IT worldwide Army operations Develop and execute the plan for the Unified Network Implement Army information assurance Supervise C4IT, Signal support, Information security, Force structure and equipping activities in support of warfighting operations Oversee management of the Signal forces == Planned realignment == On June 11, 2020, the Army announced that the two roles of CIO and Deputy Chief of Staff, G-6 (DCS, G-6) would be realigned no later than August 31, 2020, with separate individuals responsible for each position. With the realignment: CIO core functions will be policy, governance, and oversight. Focus areas include: Information Environment, Cybersecurity, Enterprise Architecture, and Data Policy/Oversight/Governance, Enterprise Architecture, Enterprise Cloud Management and IT Spend/Category Management. DCS, G-6 core functions will be planning, strategy, and implementation. Focus areas include: Information Environment/Network, Planning and Integration, Theater Synchronization, Architecture Integration, Enterprise Information Environment (EIE) Mission Area Portfolio Management and Mission Decision Packet Management. In order to support multi-domain operations, the Army will have to connect Enterprise networks and tactical networks. —LTG Morrison, DCS, G-6 DCS G-6 released the Army Unified Network Plan under the Army Digital Transformation Strategy, to help the Army to establish a Multi-Domain Operations capable force by 2028. The Unified Network will enable Army formations, as part of the Joint Force, to operate in highly contested and congested operational environments with the speed and global range to achieve decision dominance and maintain overmatch. The plan shapes, synchronizes, integrates and governs Unified Network efforts and aligns the personnel, organizational structure and capabilities required to enable MDO at all echelons. == Chief signal officers and their successors == Chief signal officers (1860–1964) Maj. Albert J. Myer 1860–1863 Lt. Col. William J. L. Nicodemus 1863–1864 Col. Benjamin F. Fisher 1864–1866 Col. Albert J. Myer 1866–1880 (promoted to brigadier general 16 June 1880) Brig. Gen. William B. Hazen 1880–1887 Brig. Gen. Adolphus W. Greely 1887–1906 Brig. Gen. James Allen 1906–1913 Brig. Gen. George P. Scriven 1913–1917 Brig. Gen. George O. Squier 1917–1923 (promoted to major general 6 October 1917) Maj. Gen. Charles McK. Saltzman 1924–1928 Maj. Gen. George Sabin Gibbs 1928–1931 Maj. Gen. Irving J. Carr 1931–1934 Maj. Gen. James B. Allison 1935–1937 Maj. Gen. Joseph O. Mauborgne 1937–1941 Maj. Gen. Dawson Olmstead 1941–1943 Maj. Gen. Harry C. Ingles 1943–1947 Maj. Gen. Spencer B. Akin 1947–1951 Maj. Gen. George I. Back 1951–1955 Lt. Gen. James D. O’Connell 1955–1959 Maj. Gen. Ralph T. Nelson 1959–1962 Maj. Gen. Earle F. Cook 1962–1963 Maj. Gen. David Parker Gibbs 1963–1964 Chiefs of communications-electronics (1964–1967) Maj. Gen. David Parker Gibbs 1964–1966 Maj. Gen. Walter E. Lotz, Jr. 1966–1967 Assistant chiefs of staff for communications-electronics (1967–1974) Maj. Gen. Walter E. Lotz, Jr. 1967–1968 Maj. Gen. George E. Pickett 1968–1972 Lt. Gen. Thomas Rienzi 1972–1974 Directors of telecommunications and command and control (1974–1978) (a directorate of ODCSOPS) Lt. Gen. Thomas Rienzi 1974–1977 Lt. Gen. Charles R. Myer 1977–1978 Assistant chiefs of staff for automation and communications (1978–1981) Lt. Gen. Charles R. Myer 1978–1979 Maj. Gen. Clay T. Buckingham 1979–1981 Assistant deputy chiefs of staff for operations and plans (command, control, communications, and computers) (1981–1984) Maj. Gen. Clay T. Buckingham 1981–1982 Maj. Gen. James M. Rockwell 1982–1984 Assistant chiefs of staff for information management (1984–1987) Lt. Gen. David K. Doyle 1984–1986 Lt. Gen. Thurman D. Rodgers 1986–1987 Directors of information systems for command, control, communications, and computers Lt. Gen. Thurman D. Rodgers 1987–1988 Lt. Gen. Bruce R. Harris 1988–1990 Lt. Gen. Jerome B. Hilmes 1990–1992 Lt. Gen. Peter A. Kind 1992–1994 Lt. Gen. Otto J. Guenther 1995–1997 Lt. Gen. William H. Campbell Chief Information Officer, Military Deputy to the Army Acquisition Executive, and Director of Information Systems for Command, Control, Communications and Computers Lt. Gen. William H. Campbell 1997–2000
Read more →
Ontology alignment

Ontology alignment, or ontology matching, is the process of determining correspondences between concepts in ontologies. A set of correspondences is also called an alignment. The phrase takes on a slightly different meaning, in computer science, cognitive science or philosophy. == Computer science == For computer scientists, concepts are expressed as labels for data. Historically, the need for ontology alignment arose out of the need to integrate heterogeneous databases, ones developed independently and thus each having their own data vocabulary. In the Semantic Web context involving many actors providing their own ontologies, ontology matching has taken a critical place for helping heterogeneous resources to interoperate. Ontology alignment tools find classes of data that are semantically equivalent, for example, "truck" and "lorry". The classes are not necessarily logically identical. According to Euzenat and Shvaiko (2007), there are three major dimensions for similarity: syntactic, external, and semantic. Coincidentally, they roughly correspond to the dimensions identified by Cognitive Scientists below. A number of tools and frameworks have been developed for aligning ontologies, some with inspiration from Cognitive Science and some independently. Ontology alignment tools have generally been developed to operate on database schemas, XML schemas, taxonomies, formal languages, entity-relationship models, dictionaries, and other label frameworks. They are usually converted to a graph representation before being matched. Since the emergence of the Semantic Web, such graphs can be represented in the Resource Description Framework line of languages by triples of the form , as illustrated in the Notation 3 syntax. In this context, aligning ontologies is sometimes referred to as "ontology matching". The problem of Ontology Alignment has been tackled recently by trying to compute matching first and mapping (based on the matching) in an automatic fashion. Systems like DSSim, X-SOM or COMA++ obtained at the moment very high precision and recall. The Ontology Alignment Evaluation Initiative aims to evaluate, compare and improve the different approaches. === Formal definition === Given two ontologies i = ⟨ C i , R i , I i , T i , V i ⟩ {\displaystyle i=\langle C_{i},R_{i},I_{i},T_{i},V_{i}\rangle } and j = ⟨ C j , R j , I j , T j , V j ⟩ {\displaystyle j=\langle C_{j},R_{j},I_{j},T_{j},V_{j}\rangle } where C {\displaystyle C} is the set of classes, R {\displaystyle R} is the set of relations, I {\displaystyle I} is the set of individuals, T {\displaystyle T} is the set of data types, and V {\displaystyle V} is the set of values, we can define different types of (inter-ontology) relationships. Such relationships will be called, all together, alignments and can be categorized among different dimensions: similarity vs logic: this is the difference between matchings (predicating about the similarity of ontology terms), and mappings (logical axioms, typically expressing logical equivalence or inclusion among ontology terms) atomic vs complex: whether the alignments we considered are one-to-one, or can involve more terms in a query-like formulation (e.g., LAV/GAV mapping) homogeneous vs heterogeneous: do the alignments predicate on terms of the same type (e.g., classes are related only to classes, individuals to individuals, etc.) or we allow heterogeneity in the relationship? type of alignment: the semantics associated to an alignment. It can be subsumption, equivalence, disjointness, part-of or any user-specified relationship. Subsumption, atomic, homogeneous alignments are the building blocks to obtain richer alignments, and have a well defined semantics in every Description Logic. Let's now introduce more formally ontology matching and mapping. An atomic homogeneous matching is an alignment that carries a similarity degree s ∈ [ 0 , 1 ] {\displaystyle s\in [0,1]} , describing the similarity of two terms of the input ontologies i {\displaystyle i} and j {\displaystyle j} . Matching can be either computed, by means of heuristic algorithms, or inferred from other matchings. Formally we can say that, a matching is a quadruple m = ⟨ i d , t i , t j , s ⟩ {\displaystyle m=\langle id,t_{i},t_{j},s\rangle } , where t i {\displaystyle t_{i}} and t j {\displaystyle t_{j}} are homogeneous ontology terms, s {\displaystyle s} is the similarity degree of m {\displaystyle m} . A (subsumption, homogeneous, atomic) mapping is defined as a pair μ = ⟨ t i , t j ⟩ {\displaystyle \mu =\langle t_{i},t_{j}\rangle } , where t i {\displaystyle t_{i}} and t j {\displaystyle t_{j}} are homogeneous ontology terms. == Cognitive science == For cognitive scientists interested in ontology alignment, the "concepts" are nodes in a semantic network that reside in brains as "conceptual systems." The focal question is: if everyone has unique experiences and thus different semantic networks, then how can we ever understand each other? This question has been addressed by a model called ABSURDIST (Aligning Between Systems Using Relations Derived Inside Systems for Translation). Three major dimensions have been identified for similarity as equations for "internal similarity, external similarity, and mutual inhibition." == Ontology alignment methods == Two sub research fields have emerged in ontology mapping, namely monolingual ontology mapping and cross-lingual ontology mapping. The former refers to the mapping of ontologies in the same natural language, whereas the latter refers to "the process of establishing relationships among ontological resources from two or more independent ontologies where each ontology is labelled in a different natural language". Existing matching methods in monolingual ontology mapping are discussed in Euzenat and Shvaiko (2007). Approaches to cross-lingual ontology mapping are presented in Fu et al. (2011).
Read more →
Document capture software

Document capture software refers to applications that provide the ability and feature set to automate the process of scanning paper documents or importing electronic documents, often for the purposes of feeding advanced document classification and data collection processes. Most scanning hardware, both scanners and copiers, provides the basic ability to scan to any number of image file formats, including: PDF, TIFF, JPG, BMP, etc. This basic functionality is augmented by document capture software, which can add efficiency and standardization to the process. == Typical features == Typical features of Document Capture Software include: Barcode recognition Patch Code recognition Separation Optical Character Recognition (OCR) Optical Mark Recognition (OMR) Quality Assurance Indexing Migration === Goal for implementation of a document capture solution === The goal for implementing a document capture solution is to reduce the amount of time spent scanning, separating, enhancing, organizing, classifying, normalizing, and collecting information from document collections, and to produce metadata along with an image/PDF file, and/or OCR text. This information is then migrated to a file share, FTP site, database, Document Management or Enterprise Content Management system. These systems often provide a search function, allowing search of the assets based on the produced metadata, and then viewed using document imaging software. == General document capture system solutions == === Integration with document management system === ECM (Enterprise Content management) and their DMS component (Document Management System) are being adopted by many organizations as a corporate document management system for all types of electronic files, e.g. MS word, PDF ... However, much of the information held by organisations is on paper and this needs to be integrated within the same document repository. By converting paper documents into digital format through scanning, organizations convert paper into image formats such as TIF, JPG, and PDF, and also extract valuable index information or business data from the document using OCR technology. Digital documents and associated metadata can easily be stored in the ECM in a variety of formats. The most popular of these formats is PDF which not only provides an accurate representation of the document but also allows all the OCR text in the document to be stored behind the PDF image. This format is known as PDF with hidden text or text-searchable PDF. This allows users to search for documents by using keywords in the metadata fields or by searching the content of PDF files across the repository. ==== Advantages of scanning documents into a ECM/DMS ==== Information held on paper is usually just as valuable to organisations as the electronic documents that are generated internally. Often this information represents a large proportion of the day to day correspondence with suppliers and customers. Having the ability to manage and share this information internally through a document management system such as SharePoint or a CMIS-compatible repository improves collaboration between departments or employees and also eliminates the risk of losing this information through disasters such as floods or fire. Organisations adopting an ECM/DMS often implement electronic workflow which allows the information held on paper to be included as part of an electronic business process and incorporated into a customer record file along with other associated office documents and emails. For business critical documents, such as purchase orders and supplier invoices, digitising documents helps speed up business transactions as well as reduce manual effort involved in keying data into business systems, such as CRM, ERP and Accounting. Scanned invoices can also be routed to managers for payment approval via email or an electronic workflow. == Electronic document capture == In the earlier implementations of Document Capture Software, the technology focused solely on the digitization and capture of information from paper documents. Document images were acquired from document scanners via TWAIN/ISIS drivers. Only image-based file formats like TIF, JPG, and BMP were typically compatible with these solutions. But in recent years, as the volume of electronically-created documents and the number of proprietary file formats continues to increase at exponential rates, the need for handling documents existing in electronic formats has grown. The relevant document capture products have adapted to function with non-image file formats with the end-goal of creating a unified processing workflow capable of handling all incoming documents The ability to import files from a variety of sources is one example of such adaptation. Importing documents from ECM/DMS software solutions, email servers, FTP, and EDI is now as much of a requirement of document capture software as is paper capture. The normalization of output files to text-based PDF format is now another critical factor in long-term archival of proprietary electronic file formats. Normalization expands access and usage of files to users throughout the enterprise, rather than only those that created the original electronic file.
Read more →
Information strategist

An information strategist analyses the information flow within an organisation and directs its information resources to better serve the organisation's strategic goals. They work with information technology or within a corporate library to direct high quality information from a variety of sources to users, based upon their profiles and needs. In warfare, information strategists not only seek to improve information flows for their own side but also try to disrupt the information flows of the enemy in order to demoralize and deceive them.
Read more →
IT8

IT8 is a set of American National Standards Institute (ANSI) standards for color communications and control specifications. Formerly governed by the IT8 Committee, IT8 activities were merged with those of the Committee for Graphics Arts Technologies Standards (CGATS Archived November 9, 2018, at the Wayback Machine) in 1994. == Standards list == The following is a list of the IT8 standards, according to the NPES Standards Blue Book Archived July 19, 2011, at the Wayback Machine: === IT8.6 - 2002 - Graphic technology - Prepress digital data exchange - Diecutting data (DDES3) === This standard establishes a data exchange format to enable transfer of numerical control information between diecutting systems and electronic prepress systems. The information will typically consist of numerical control information used in the manufacture of dies. 37 pp. === IT8.7/1 - 1993 (R2003) - Graphic technology - Color transmission target for input scanner calibration === This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set used to create the target. It is intended to address the color transparency products that are generally used for input to the preparatory process for printing and publishing. This standard defines the layout and colorimetric values of a target that can be manufactured on any positive color transparency film and that is intended for use in the calibration of a photographic film/scanner combination. 32 pp. === IT8.7/2 - 1993 (R2003) Graphic technology - Color reflection target for input scanner calibration === This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set used to create the target. It is intended to address the color photographic paper products that are generally used for input to the preparatory process for printing and publishing. It defines the layout and colorimetric values of the target that can be manufactured on any color photographic paper and is intended for use in the calibration of a photographic paper/scanner combination. 29 pp. === IT8.7/3 - 1993 (R2003) Graphic technology - Input data for characterization of 4-color process printing === The purpose of this standard is to specify an input data file, a measurement procedure and an output data format to characterize any four-color printing process. The output data (characterization) file should be transferred with any four-color (cyan, magenta, yellow and black) halftone image files to enable a color transformation to be undertaken when required. 29 pp. == Targets == Calibrating all devices involved in the process chain (original, scanner/digital camera, monitor/printer) is required for an authentic color reproduction, because their actual color spaces differ device-specifically from the reference color spaces. An IT8 calibration is done with what are called IT8 targets, which are defined by the IT8 standards. Example Special targets, implementing the IT8.7/1 (transparent target) or IT8.7/2 (reflective target) standards, are needed for calibrating scanners. These targets consists of 24 grey fields and 264 color fields in 22 columns: Column 01 to 12: HCL color model, which differ in Hue, Chroma, and Lightness Column 13 to 16: CMYK-Colors Cyan, Magenta, Yellow, and Key (black) in different steps of brightness Column 17 to 19: RGB-Colors Red, Green, and Blue in different steps of brightness Column 20 to 22: undefined, producers' choice After scanning such a target, an ICC profile gets calculated on the basis of reference values. This profile is used for all subsequent scans and assures color fidelity.
Read more →
UI data binding

UI data binding is a software design pattern to simplify development of GUI applications. UI data binding binds UI elements to an application domain model. Most frameworks employ the Observer pattern as the underlying binding mechanism. To work efficiently, UI data binding has to address input validation and data type mapping. A bound control is a widget whose value is tied or bound to a field in a recordset (e.g., a column in a row of a table). Changes made to data within the control are automatically saved to the database when the control's exit event triggers. == Example == == Data binding frameworks and tools == === Delphi === DSharp third-party data binding tool OpenWire Visual Live Binding - third-party visual data binding tool === Java === JFace Data Binding JavaFX Property === .NET === Windows Forms data binding overview WPF data binding overview Avalonia Unity 3D data binding framework (available in modifications for NGUI, iGUI and EZGUI libraries) === JavaScript === Angular AngularJS Backbone.js Ember.js Datum.js knockout.js Meteor, via its Blaze live update engine OpenUI5 React Vue.js
Read more →
Artificial imagination

Artificial imagination is a narrow subcomponent of artificial general intelligence which generates, simulates, and facilitates real or possible fiction models to create predictions, inventions, or conscious experiences. The term artificial imagination is also used to describe a property of machines or programs. Some of the traits that researchers hope to simulate include creativity, vision, digital art, humor, and satire. Practitioners in the field are researching various aspects of Artificial imagination, such as Artificial (visual) imagination, Artificial (aural) Imagination, modeling/filtering content based on human emotions and Interactive Search. Some articles on the topic speculate on how artificial imagination may evolve to create an artificial world "people may be comfortable enough to escape from the real world". Some researchers such as G. Schleis and M. Rizki have focused on using artificial neural networks to simulate artificial imagination. Another important project is being led by Hiroharu Kato and Tatsuya Harada at the University of Tokyo in Japan. They have developed a computer capable of translating a description of an object into an image, which could be the easiest way to define what imagination is. Their idea is based on the concept of an image as a series of pixels divided into short sequences that correspond to a specific part of an image. The scientists call this sequences "visual words" and those can be interpreted by the machine using statistical distribution to read an create an image of an object the machine has not encountered. The topic of artificial imagination has garnered interest from scholars outside the computer science domain, such as noted communications scholar Ernest Bormann, who came up with the Symbolic Convergence Theory and worked on a project to develop artificial imagination in computer systems. An interdisciplinary research seminar organized by the artist Grégory Chatonsky on artificial imagination and postdigital art has taken place since 2017 at the Ecole Normale Supérieure in Paris. == Use in interactive search == The typical application of artificial imagination is for an interactive search. Interactive searching has been developed since the mid-1990s, accompanied by the World Wide Web's development and the optimization of search engines. Based on the first query and feedback from a user, the databases to be searched are reorganized to improve the searching results. Artificial imagination allows us to synthesize images and to develop a new image, whether it is in the database, regardless its existence in the real world. For example, the computer shows results that are based on the answer from the initial query. The user selects several relevant images, and then the technology analyzes these selections and reorganizes the images' ranks to fit the query. In this process, artificial imagination is used to synthesize the selected images and to improve the searching result with additional relevant synthesized images. This technique is based on several algorithms, including the Rocchio algorithm and the evolutionary algorithm. The Rocchio algorithm, locating a query point near relevant examples and far away from irrelevant examples, is simple and works well in a small system where the databases are arranged in certain ranks. The evolutionary synthesis is composed of two steps: a standard algorithm and an enhancement of the standard algorithm. Through feedback from the user, there would be additional images synthesized so as to be suited to what the user is looking for. == General artificial imagination == Artificial imagination has a more general definition and wide applications. The traditional fields of artificial imagination include visual imagination and aural imagination. More generally, all the actions to form ideas, images and concepts can be linked to imagination. Thus, artificial imagination means more than only generating graphs. For example, moral imagination is an important research subfield of artificial imagination, although classification of artificial imagination is difficult. Morals are an important part to human beings' logic, while artificial morals are important in artificial imagination and artificial intelligence. A common criticism of artificial intelligence is whether human beings should take responsibility for machines' mistakes or decisions and how to develop well-behaved machines. As nobody can give a clear description of the best moral rules, it is impossible to create machines with commonly accepted moral rules. However, recent research about artificial morals circumvent the definition of moral. Instead, machine learning methods are applied to train machines to imitate human morals. As the data about moral decisions from thousands of different people are considered, the trained moral model can reflect widely accepted rules. Memory is another major field of artificial imagination. Researchers such as Aude Oliva have performed extensive work on artificial memory, especially visual memory. Compared to visual imagination, the visual memory focuses more on how machine understand, analyse and store pictures in a human way. In addition, characters like spatial features are also considered. As this field is based on the brains' biological structures, extensive research on neuroscience has also been performed, which makes it a large intersection between biology and computer science.
Read more →
Online analytical processing

In computing, online analytical processing (OLAP) (), is an approach to quickly answer multi-dimensional analytical (MDA) queries. The term OLAP was created as a slight modification of the traditional database term online transaction processing (OLTP). OLAP is part of the broader category of business intelligence, which also encompasses relational databases, report writing and data mining. Typical applications of OLAP include business reporting for sales, marketing, management reporting, business process management (BPM), budgeting and forecasting, financial reporting and similar areas, with new applications emerging, such as agriculture. OLAP tools enable users to analyse multidimensional data interactively from multiple perspectives. OLAP consists of three basic analytical operations: consolidation (roll-up), drill-down, and slicing and dicing. Consolidation involves the aggregation of data that can be accumulated and computed in one or more dimensions. For example, all sales offices are rolled up to the sales department or sales division to anticipate sales trends. By contrast, the drill-down is a technique that allows users to navigate through the details. For instance, users can view the sales by individual products that make up a region's sales. Slicing and dicing is a feature whereby users can take out (slicing) a specific set of data of the OLAP cube and view (dicing) the slices from different viewpoints. These viewpoints are sometimes called dimensions (such as looking at the same sales by salesperson, or by date, or by customer, or by product, or by region, etc.). Databases configured for OLAP use a multidimensional data model, allowing for complex analytical and ad hoc queries with a rapid execution time. They borrow aspects of navigational databases, hierarchical databases and relational databases. OLAP is typically contrasted to OLTP (online transaction processing), which is generally characterized by much less complex queries, in a larger volume, to process transactions rather than for the purpose of business intelligence or reporting. Whereas OLAP systems are mostly optimized for read, OLTP has to process all kinds of queries (read, insert, update and delete). == Overview of OLAP systems == At the core of any OLAP system is an OLAP cube (also called a 'multidimensional cube' or a hypercube). It consists of numeric facts called measures that are categorized by dimensions. The measures are placed at the intersections of the hypercube, which is spanned by the dimensions as a vector space. The usual interface to manipulate an OLAP cube is a matrix interface, like Pivot tables in a spreadsheet program, which performs projection operations along the dimensions, such as aggregation or averaging. The cube metadata is typically created from a star schema or snowflake schema or fact constellation of tables in a relational database. Measures are derived from the records in the fact table and dimensions are derived from the dimension tables. Each measure can be thought of as having a set of labels, or meta-data associated with it. A dimension is what describes these labels; it provides information about the measure. A simple example would be a cube that contains a store's sales as a measure, and Date/Time as a dimension. Each Sale has a Date/Time label that describes more about that sale. For example: Sales Fact Table +-------------+----------+ | sale_amount | time_id | +-------------+----------+ Time Dimension | 930.10| 1234 |----+ +---------+-------------------+ +-------------+----------+ | | time_id | timestamp | | +---------+-------------------+ +---->| 1234 | 20080902 12:35:43 | +---------+-------------------+ === Multidimensional databases === Multidimensional structure is defined as "a variation of the relational model that uses multidimensional structures to organize data and express the relationships between data". The structure is broken into cubes and the cubes are able to store and access data within the confines of each cube. "Each cell within a multidimensional structure contains aggregated data related to elements along each of its dimensions". Even when data is manipulated it remains easy to access and continues to constitute a compact database format. The data still remains interrelated. Multidimensional structure is quite popular for analytical databases that use online analytical processing (OLAP) applications. Analytical databases use these databases because of their ability to deliver answers to complex business queries swiftly. Data can be viewed from different angles, which gives a broader perspective of a problem unlike other models. === Aggregations === It has been claimed that for complex queries OLAP cubes can produce an answer in around 0.1% of the time required for the same query on OLTP relational data. The most important mechanism in OLAP which allows it to achieve such performance is the use of aggregations. Aggregations are built from the fact table by changing the granularity on specific dimensions and aggregating up data along these dimensions, using an aggregate function (or aggregation function). The number of possible aggregations is determined by every possible combination of dimension granularities. The combination of all possible aggregations and the base data contains the answers to every query which can be answered from the data. Because usually there are many aggregations that can be calculated, often only a predetermined number are fully calculated; the remainder are solved on demand. The problem of deciding which aggregations (views) to calculate is known as the view selection problem. View selection can be constrained by the total size of the selected set of aggregations, the time to update them from changes in the base data, or both. The objective of view selection is typically to minimize the average time to answer OLAP queries, although some studies also minimize the update time. View selection is NP-complete. Many approaches to the problem have been explored, including greedy algorithms, randomized search, genetic algorithms and A search algorithm. Some aggregation functions can be computed for the entire OLAP cube by precomputing values for each cell, and then computing the aggregation for a roll-up of cells by aggregating these aggregates, applying a divide and conquer algorithm to the multidimensional problem to compute them efficiently. For example, the overall sum of a roll-up is just the sum of the sub-sums in each cell. Functions that can be decomposed in this way are called decomposable aggregation functions, and include COUNT, MAX, MIN, and SUM, which can be computed for each cell and then directly aggregated; these are known as self-decomposable aggregation functions. In other cases, the aggregate function can be computed by computing auxiliary numbers for cells, aggregating these auxiliary numbers, and finally computing the overall number at the end; examples include AVERAGE (tracking sum and count, dividing at the end) and RANGE (tracking max and min, subtracting at the end). In other cases, the aggregate function cannot be computed without analyzing the entire set at once, though in some cases approximations can be computed; examples include DISTINCT COUNT, MEDIAN, and MODE; for example, the median of a set is not the median of medians of subsets. These latter are difficult to implement efficiently in OLAP, as they require computing the aggregate function on the base data, either computing them online (slow) or precomputing them for possible rollouts (large space). == Types == OLAP systems have been traditionally categorized using the following taxonomy. === Multidimensional OLAP (MOLAP) === MOLAP (multi-dimensional online analytical processing) is the classic form of OLAP and is sometimes referred to as just OLAP. MOLAP stores this data in an optimized multi-dimensional array storage, rather than in a relational database. Some MOLAP tools require the pre-computation and storage of derived data, such as consolidations – the operation known as processing. Such MOLAP tools generally utilize a pre-calculated data set referred to as a data cube. The data cube contains all the possible answers to a given range of questions. As a result, they have a very fast response to queries. On the other hand, updating can take a long time depending on the degree of pre-computation. Pre-computation can also lead to what is known as data explosion. Other MOLAP tools, particularly those that implement the functional database model do not pre-compute derived data but make all calculations on demand other than those that were previously requested and stored in a cache. Advantages of MOLAP Fast query performance due to optimized storage, multidimensional indexing and caching. Smaller on-disk size of data compared to data stored in relational database due to compression techniques. Automated computation of higher-level aggregates of the data. It is very compact for low dimension data se
Read more →
Clef (app)

Clef was a San Francisco-based technology company, known for developing a mobile app that created a two-factor authentication for websites. It allowed users to access sites with a single login password management service which stores encrypted passwords in private accounts. It had a standard verification method that requires access to data on the mobile phone to confirm the user's identity. The application required a Wi-Fi or mobile network, and the user could log in by scanning the computer screen with their phone. == History == Clef was founded in 2013 by Mark Hudnall, B. Byrne and Jesse Pollak. It raised $1.6 million in seed funding in November 2014. Clef integrated with many websites and applications, including WordPress. On March 17, 2017, Clef announced they would no longer support the plugin after June 6, 2017; Clef was acquired by Authy, another 2FA service, which later got acquired by Twilio.
Read more →
Shapiro–Senapathy algorithm

The Shapiro—Senapathy algorithm (S&S) is a computational method for identifying splice sites in eukaryotic genes. The algorithm employs a Position Weight Matrix (PWM) scoring formula to predict donor and acceptor splice sites in any given gene. This methodology has been used to discover splice sites and disease-causing splice site mutations in the human genome, and has become a standard tool in clinical genomics. The S&S algorithm has been cited in thousands of clinical studies, according to Google Scholar. It has also formed the basis of widely used software, including Human Splicing Finder, SROOGLE, and Alamut, which identify splice sites and splice site mutations that cause disease. The algorithm has uncovered splicing mutations in diseases ranging from cancers to inherited disorders, and predicted the deleterious effects of these mutations including exon skipping, intron retention, and cryptic splice site activation. == The algorithm == A splice site defines the boundary between a coding exon and a non-coding intron in eukaryotic genes. The S&S algorithm employs a sliding window, corresponding to the length of the splice site motif, to scan a gene sequence and detect potential splice sites. For each sliding window, the algorithm calculates a score by comparing the nucleotide sequence to a Position Weight Matrix (PWM) derived from known splice sites. This formula generates a percentile score, indicating the likelihood that a given sequence functions as a donor or acceptor splice site. The majority of disease-causing mutations in the human genome are located in splice sites. Clinical genomics studies analyze the splice site scores generated by the S&S algorithm to predict the consequences of splice site mutations including exon skipping and intron retention. The algorithm's sensitivity to single-nucleotide changes allows it to determine mutations that may impact RNA splicing and contribute to disease. In addition to identifying real splice sites, the S&S algorithm has been used to discover cryptic splice sites — alternative splice sites activated by mutations — which may disrupt normal splicing. The algorithm detects mutations that lead to the activation of cryptic splice sites, which may be located proximal to real splice sites or deep within non-coding introns. It has thus been used to determine the causes of numerous diseases that are due to cryptic splicing. == Cancer gene discovery using S&S == The S&S algorithm has been used to identify splice-site mutations in genes associated with several cancers. For example, genes causing commonly occurring cancers including breast cancer, ovarian cancer, colorectal cancer, leukemia, head and neck cancers, prostate cancer, retinoblastoma, squamous cell carcinoma, gastrointestinal cancer, melanoma, liver cancer, Lynch syndrome, skin cancer, and neurofibromatosis have been found. In addition, splicing mutations in genes causing less commonly known cancers including gastric cancer, gangliogliomas, Li-Fraumeni syndrome, Loeys–Dietz syndrome, Osteochondromas (bone tumor), Nevoid basal cell carcinoma syndrome, and Pheochromocytomas have been identified. Specific mutations in different splice sites in various genes causing breast cancer (e.g., BRCA1, PALB2), ovarian cancer (e.g., SLC9A3R1, COL7A1, HSD17B7), colon cancer (e.g., APC, MLH1, DPYD), colorectal cancer (e.g., COL3A1, APC, HLA-A), skin cancer (e.g., COL17A1, XPA, POLH), and Fanconi anemia (e.g., FANC, FANA) have been uncovered. The mutations in the donor and acceptor splice sites in different genes causing a variety of cancers that have been identified by S&S are shown in Table 1. == Discovery of genes causing inherited disorders using S&S == Specific mutations in different splice sites in various genes that cause inherited disorders, including, for example, Type 1 diabetes (e.g., PTPN22, TCF1 (HCF-1A)), hypertension (e.g., LDL, LDLR, LPL), Marfan syndrome (e.g., FBN1, TGFBR2, FBN2), cardiac diseases (e.g., COL1A2, MYBPC3, ACTC1), eye disorders (e.g., EVC, VSX1) have been uncovered. A few example mutations in the donor and acceptor splice sites in different genes causing a variety of inherited disorders identified using S&S are shown in Table 2. == Genes causing immune system disorders == More than 100 immune system disorders affect humans, including inflammatory bowel diseases, multiple sclerosis, systemic lupus erythematosus, bloom syndrome, familial cold autoinflammatory syndrome, and dyskeratosis congenita. The Shapiro–Senapathy algorithm has been used to discover genes and mutations involved in many immune disorder diseases, including Ataxia telangiectasia, B-cell defects, epidermolysis bullosa, and X-linked agammaglobulinemia. Xeroderma pigmentosum, an autosomal recessive disorder is caused by faulty proteins formed due to new preferred splice donor site identified using S&S algorithm and resulted in defective nucleotide excision repair. Type I Bartter syndrome (BS) is caused by mutations in the gene SLC12A1. S&S algorithm helped in disclosing the presence of two novel heterozygous mutations c.724 + 4A > G in intron 5 and c.2095delG in intron 16 leading to complete exon 5 skipping. Mutations in the MYH gene, which is responsible for removing the oxidatively damaged DNA lesion are cancer-susceptible in the individuals. The IVS1+5C plays a causative role in the activation of a cryptic splice donor site and the alternative splicing in intron 1, S&S algorithm shows, guanine (G) at the position of IVS+5 is well conserved (at the frequency of 84%) among primates. This also supported the fact that the G/C SNP in the conserved splice junction of the MYH gene causes the alternative splicing of intron 1 of the β type transcript. Splice site scores were calculated according to S&S to find EBV infection in X-linked lymphoproliferative disease. Identification of Familial tumoral calcinosis (FTC) is an autosomal recessive disorder characterized by ectopic calcifications and elevated serum phosphate levels and it is because of aberrant splicing. == Application of S&S in hospitals for clinical practice and research == The Shapiro–Senapathy (S&S) algorithm has played a significant role in advancing the diagnosis and treatment of human diseases through its application in modern clinical genomics. With the widespread adoption of next-generation sequencing (NGS) technologies, the S&S algorithm is now routinely integrated into clinical practice by geneticists and diagnostic laboratories. It is implemented in various computational tools such as Human Splicing Finder (HSF), Splice Site Finder (SSF), and Alamut Visual, which assist in interpreting the functional impact of genetic variants on RNA splicing. The algorithm is particularly useful in identifying pathogenic splice site mutations in cases where the clinical presentation is unclear or where conventional diagnostic methods have failed to identify a causative gene. Its utility has been demonstrated across diverse patient cohorts, including individuals from different ethnic backgrounds with various cancers and inherited genetic disorders. The following are selected examples illustrating its application in clinical research. === Cancers === === Inherited disorders === == S&S - Algorithm for identifying splice sites, exons and split genes == The Shapiro–Senapathy algorithm (SSA) was developed to identify splice sites in uncharacterized genomic sequences, with early applications in the Human Genome Project. The method introduced a Position Weight Matrix (PWM)-based approach to analyze splicing sequences across eukaryotic organisms, marking the first computational framework to systematically define splice sites using probabilistic scoring. Key innovations of the algorithm included: Exon Detection – Exons were defined as sequences bounded by acceptor and donor splice sites with S&S scores above a threshold, requiring an open reading frame (ORF) for validation. Gene Prediction – The method enabled the identification of complete genes by assembling predicted exons, forming a basis for later gene-finding tools. Mutation Analysis – The algorithm distinguishes deleterious splice-site mutations (which disrupt protein function by lowering S&S scores) from neutral variations. This capability allowed researchers to study disease-linked cryptic splice sites in humans, animals, and plants. SSA's PWM-based framework influenced subsequent computational methods, including machine learning and neural network approaches, for splice-site prediction and alternative splicing research. It remains a foundational tool in genomics and disease studies. == Discovering the mechanisms of aberrant splicing in diseases == The Shapiro–Senapathy algorithm has been used to determine the various aberrant splicing mechanisms in genes due to deleterious mutations in the splice sites, which cause numerous diseases. Deleterious splice site mutations impair the normal splicing of the gene transcripts, and thereby make the encoded protei
Read more →
Magic state distillation

Magic state distillation is a method for creating more accurate quantum states from multiple noisy ones, which is important for building fault tolerant quantum computers. It has also been linked to quantum contextuality, a concept thought to contribute to quantum computers' power. The technique was first proposed by Emanuel Knill in 2004, and further analyzed by Sergey Bravyi and Alexei Kitaev the same year. Thanks to the Gottesman–Knill theorem, it is known that some quantum operations (operations in the Clifford group) can be perfectly simulated in polynomial time on a classical computer. In order to achieve universal quantum computation, a quantum computer must be able to perform operations outside this set. Magic state distillation achieves this, in principle, by concentrating the usefulness of imperfect resources, represented by mixed states, into states that are conducive for performing operations that are difficult to simulate classically. A variety of qubit magic state distillation routines and distillation routines for qubits with various advantages have been proposed. == Stabilizer formalism == The Clifford group consists of a set of n {\displaystyle n} -qubit operations generated by the gates {H, S, CNOT} (where H is Hadamard and S is [ 1 0 0 i ] {\displaystyle {\begin{bmatrix}1&0\\0&i\end{bmatrix}}} ) called Clifford gates. The Clifford group generates stabilizer states which can be efficiently simulated classically, as shown by the Gottesman–Knill theorem. This set of gates with a non-Clifford operation is universal for quantum computation. == Magic states == Magic states are purified from n {\displaystyle n} copies of a mixed state ρ {\displaystyle \rho } . These states are typically provided via an ancilla to the circuit. A magic state for the π / 6 {\displaystyle \pi /6} rotation operator is | M ⟩ = cos ⁡ ( β / 2 ) | 0 ⟩ + e i π 4 sin ⁡ ( β / 2 ) | 1 ⟩ {\displaystyle |M\rangle =\cos(\beta /2)|0\rangle +e^{i{\frac {\pi }{4}}}\sin(\beta /2)|1\rangle } where β = arccos ⁡ ( 1 3 ) {\displaystyle \beta =\arccos \left({\frac {1}{\sqrt {3}}}\right)} . A non-Clifford gate can be generated by combining (copies of) magic states with Clifford gates. Since a set of Clifford gates combined with a non-Clifford gate is universal for quantum computation, magic states combined with Clifford gates are also universal. == Purification algorithm for distilling |M〉 == The first magic state distillation algorithm, invented by Sergey Bravyi and Alexei Kitaev, is as follows. Input: Prepare 5 imperfect states. Output: An almost pure state having a small error probability. repeat Apply the decoding operation of the five-qubit error correcting code and measure the syndrome. If the measured syndrome is | 0000 ⟩ {\displaystyle |0000\rangle } , the distillation attempt is successful. else Get rid of the resulting state and restart the algorithm. until The states have been distilled to the desired purity.
Read more →
NoSQL

NoSQL (originally meaning "not only SQL" or "non-relational") refers to a type of database design that stores and retrieves data differently from the traditional table-based structure of relational databases. Unlike relational databases, which organize data into rows and columns like a spreadsheet, NoSQL databases use a single data structure—such as key–value pairs, wide columns, graphs, or documents—to hold information. Since this non-relational design does not require a fixed schema, it scales easily to manage large, often unstructured datasets. NoSQL systems are sometimes called "Not only SQL" because they can support SQL-like query languages or work alongside SQL databases in polyglot-persistent setups, where multiple database types are combined. Non-relational databases date back to the late 1960s, but the term "NoSQL" emerged in the early 2000s, spurred by the needs of Web 2.0 companies like social media platforms. NoSQL databases are popular in big data and real-time web applications due to their simple design, ability to scale across clusters of machines (called horizontal scaling), and precise control over data availability. These structures can speed up certain tasks and are often considered more adaptable than fixed database tables. However, many NoSQL systems prioritize speed and availability over strict consistency (per the CAP theorem), using eventual consistency—where updates reach all nodes eventually, typically within milliseconds, but may cause brief delays in accessing the latest data, known as stale reads. While most lack full ACID transaction support, some, like MongoDB, include it as a key feature. == Barriers to adoption == Barriers to wider NoSQL adoption include their use of low-level query languages instead of SQL, inability to perform ad hoc joins across tables, lack of standardized interfaces, and significant investments already made in relational databases. Some NoSQL systems risk losing data through lost writes or other forms, though features like write-ahead logging—a method to record changes before they’re applied—can help prevent this. For distributed transaction processing across multiple databases, keeping data consistent is a challenge for both NoSQL and relational systems, as relational databases cannot enforce rules linking separate databases, and few systems support both ACID transactions and X/Open XA standards for managing distributed updates. Limitations within the interface environment are overcome using semantic virtualization protocols, such that NoSQL services are accessible to most operating systems. == History == The term NoSQL was used by Carlo Strozzi in 1998 to name his lightweight Strozzi NoSQL open-source relational database that did not expose the standard Structured Query Language (SQL) interface, but was still relational. His NoSQL RDBMS is distinct from the around-2009 general concept of NoSQL databases. Strozzi suggests that, because the current NoSQL movement "departs from the relational model altogether, it should therefore have been called more appropriately 'NoREL'", referring to "not relational". Johan Oskarsson, then a developer at Last.fm, reintroduced the term NoSQL in early 2009 when he organized an event to discuss "open-source distributed, non-relational databases". The name attempted to label the emergence of an increasing number of non-relational, distributed data stores, including open source clones of Google's Bigtable/MapReduce and Amazon's DynamoDB. == Types and examples == There are various ways to classify NoSQL databases, with different categories and subcategories, some of which overlap. What follows is a non-exhaustive classification by data model, with examples: === Key–value store === Key–value (KV) stores use the associative array (also called a map or dictionary) as their fundamental data model. In this model, data is represented as a collection of key–value pairs, such that each possible key appears at most once in the collection. The key–value model is one of the simplest non-trivial data models, and richer data models are often implemented as an extension of it. The key–value model can be extended to a discretely ordered model that maintains keys in lexicographic order. This extension is computationally powerful, in that it can efficiently retrieve selective key ranges. Key–value stores can use consistency models ranging from eventual consistency to serializability. Some databases support ordering of keys. There are various hardware implementations, and some users store data in memory (RAM), while others on solid-state drives (SSD) or rotating disks (aka hard disk drive (HDD)). === Document store === The central concept of a document store is that of a "document". While the details of this definition differ among document-oriented databases, they all assume that documents encapsulate and encode data (or information) in some standard formats or encodings. Encodings in use include XML, YAML, and JSON and binary forms like BSON. Documents are addressed in the database via a unique key that represents that document. Another defining characteristic of a document-oriented database is an API or query language to retrieve documents based on their contents. Different implementations offer different ways of organizing and/or grouping documents: Collections Tags Non-visible metadata Directory hierarchies Compared to relational databases, collections could be considered analogous to tables and documents analogous to records. But they are different – every record in a table has the same sequence of fields, while documents in a collection may have fields that are completely different. === Graph === Graph databases are designed for data whose relations are well represented as a graph consisting of elements connected by a finite number of relations. Examples of data include social relations, public transport links, road maps, network topologies, etc. Graph databases and their query language == Performance == The performance of NoSQL databases is usually evaluated using the metric of throughput, which is measured as operations per second. Performance evaluation must pay attention to the right benchmarks such as production configurations, parameters of the databases, anticipated data volume, and concurrent user workloads. Ben Scofield rated different categories of NoSQL databases as follows: Performance and scalability comparisons are most commonly done using the YCSB benchmark. == Handling relational data == Since most NoSQL databases lack ability for joins in queries, the database schema generally needs to be designed differently. There are three main techniques for handling relational data in a NoSQL database. (See table join and ACID support for NoSQL databases that support joins.) === Multiple queries === Instead of retrieving all the data with one query, it is common to do several queries to get the desired data. NoSQL queries are often faster than traditional SQL queries, so the cost of additional queries may be acceptable. If an excessive number of queries would be necessary, one of the other two approaches is more appropriate. === Caching, replication and non-normalized data === Instead of only storing foreign keys, it is common to store actual foreign values along with the model's data. For example, each blog comment might include the username in addition to a user id, thus providing easy access to the username without requiring another lookup. When a username changes, however, this will now need to be changed in many places in the database. Thus this approach works better when reads are much more common than writes. === Nesting data === With document databases like MongoDB it is common to put more data in a smaller number of collections. For example, in a blogging application, one might choose to store comments within the blog post document, so that with a single retrieval one gets all the comments. Thus in this approach a single document contains all the data needed for a specific task. == ACID and join support == A database is marked as supporting ACID properties (atomicity, consistency, isolation, durability) or join operations if the documentation for the database makes that claim. However, this doesn't necessarily mean that the capability is fully supported in a manner similar to most SQL databases. == Query optimization and indexing in NoSQL databases == Different NoSQL databases, such as DynamoDB, MongoDB, Cassandra, Couchbase, HBase, and Redis, exhibit varying behaviors when querying non-indexed fields. Many perform full-table or collection scans for such queries, applying filtering operations after retrieving data. However, modern NoSQL databases often incorporate advanced features to optimize query performance. For example, MongoDB supports compound indexes and query-optimization strategies, Cassandra offers secondary indexes and materialized views, and Redis employs custom indexing mechanisms tailored to specific use cases. Systems like El
Read more →
Incremental heuristic search

Incremental heuristic search algorithms combine both incremental and heuristic search to speed up searches of sequences of similar search problems, which is important in domains that are only incompletely known or change dynamically. Incremental search has been studied at least since the late 1960s. Incremental search algorithms reuse information from previous searches to speed up the current search and solve search problems potentially much faster than solving them repeatedly from scratch. Similarly, heuristic search has also been studied at least since the late 1960s. Heuristic search algorithms, often based on A, use heuristic knowledge in the form of approximations of the goal distances to focus the search and solve search problems potentially much faster than uninformed search algorithms. The resulting search problems, sometimes called dynamic path planning problems, are graph search problems where paths have to be found repeatedly because the topology of the graph, its edge costs, the start vertex or the goal vertices change over time. So far, three main classes of incremental heuristic search algorithms have been developed: The first class restarts A at the point where its current search deviates from the previous one (example: Fringe Saving A). The second class updates the h-values (heuristic, i.e. approximate distance to goal) from the previous search during the current search to make them more informed (example: Generalized Adaptive A). The third class updates the g-values (distance from start) from the previous search during the current search to correct them when necessary, which can be interpreted as transforming the A search tree from the previous search into the A search tree for the current search (examples: Lifelong Planning A, D, D Lite). All three classes of incremental heuristic search algorithms are different from other replanning algorithms, such as planning by analogy, in that their plan quality does not deteriorate with the number of replanning episodes. == Applications == Incremental heuristic search has been extensively used in robotics, where a larger number of path planning systems are based on either D (typically earlier systems) or D Lite (current systems), two different incremental heuristic search algorithms.
Read more →
Block swap algorithms

In computer algorithms, block swap algorithms swap two regions of elements of an array. It is simple to swap two non-overlapping regions of an array of equal size. However, it is not as simple to swap two contiguous regions of an array of unequal sizes (algorithms that perform such swapping are called rotation algorithms). A few well-known algorithms can accomplish this: Bentley's juggling (also known as the dolphin algorithm), Gries-Mills rotation, triple reversal algorithm, conjoined triple reversal algorithm (also known as the trinity rotation) and Successive rotation. == Triple reversal algorithm == The triple reversal algorithm is the simplest to explain, using rotations. A rotation is an in-place reversal of array elements. This method swaps two elements of an array from outside in within a range. The rotation works for an even or odd number of array elements. The reversal algorithm uses three in-place rotations to accomplish an in-place block swap: Rotate region A Rotate region B Rotate region AB Where A and B are adjacent regions of an array that together form the region AB. Gries-Mills and reversal algorithms perform better than Bentley's juggling, because of their cache-friendly memory access pattern behavior. The triple reversal algorithm parallelizes well, because rotations can be split into sub-regions, which can be rotated independently of others.
Read more →
Information access

Information access is the freedom or ability to identify, obtain and make use of database or information effectively. There are various research efforts in information access for which the objective is to simplify and make it more effective for human users to access and further process large and unwieldy amounts of data and information. == Technology == Several technologies applicable to the general area are Information Retrieval, Text Mining, Machine Translation, and Text Categorisation. During discussions on free access to information as well as on information policy, information access is understood as concerning the insurance of free and closed access to information. Information access covers many issues including copyright, open source, privacy, and security. == Groups == Groups such as the American Library Association, the American Association of Law Libraries, Ralph Nader's Taxpayers Assets Project have advocated for free access to legal information. The vendor neutral citation movement in the legal field is working to ensure that courts will accept citations from cases on the web which do not have the traditional (copyrighted) page numbers from the West Publishing company. There is a worldwide Free Access to Law Movement which advocates free access to legal information. The Wired article "Who Owns The Law" is an introduction to the access to legal information issue. Postsecondary organizations such as K-12 work to share information. They feel it is a legal and moral obligation to provide access (including to people with disabilities or impairments) to information through the services and programs they offer. Some effects of charging for information access, such as literature searches for physicians, is studied in the article "Fee or Free: The Effect of Charging on Information Demand". In this study, a $5 charge resulted in a 77% decrease in searches.
Read more →