AI Avatar Software

AI Avatar Software — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Automatic meter reading

  Automatic meter reading (AMR) is the technology of automatically collecting consumption, diagnostic, and status data from water meter or energy metering devices (gas, electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. This timely information coupled with analysis can help both utility providers and customers better control the use and production of electric energy, gas usage, or water consumption. AMR technologies include handheld, mobile and network technologies based on telephony platforms (wired and wireless), radio frequency (RF), or powerline transmission. == Technologies == === Touch technology === With touch-based AMR, a meter reader carries a handheld computer or data collection device with a wand or probe. The device automatically collects the readings from a meter by touching or placing the read probe close to a reading coil enclosed in the touchpad. When a button is pressed, the probe sends an interrogate signal to the touch module to collect the meter reading. The software in the device matches the serial number to one in the route database, and saves the meter reading for later download to a billing or data collection computer. Since the meter reader still has to go to the site of the meter, this is sometimes referred to as "on-site" AMR. Another form of contact reader uses a standardized infrared port to transmit data. Protocols are standardized between manufacturers by such documents as ANSI C12.18 or IEC 61107. === AMR hosting === AMR hosting is a back-office solution which allows a user to track their electricity, water, or gas consumption over the Internet. All data is collected in near real-time, and is stored in a database by data acquisition software. The user can view the data via a web application, and can analyze the data using various online analysis tools such as charting load profiles, analyzing tariff components, and verify their utility bill. === Radio frequency network === Radio frequency based AMR can take many forms. The more common ones are handheld, mobile, satellite and fixed network solutions. There are both two-way RF systems and one-way RF systems in use that use both licensed and unlicensed RF bands. In a two-way or "wake up" system, a radio signal is normally sent to an AMR meter's unique serial number, instructing its transceiver to power-up and transmit its data. The meter transceiver and the reading transceiver both send and receive radio signals. In a one-way "bubble-up" or continuous broadcast type system, the meter transmits continuously and data is sent every few seconds. This means the reading device can be a receiver only, and the meter a transmitter only. Data travels only from the meter transmitter to the reading receiver. There are also hybrid systems that combine one-way and two-way techniques, using one-way communication for reading and two-way communication for programming functions. RF-based meter reading usually eliminates the need for the meter reader to enter the property or home, or to locate and open an underground meter pit. The utility saves money by increased speed of reading, has less liability from entering private property, and has fewer missed readings from being unable to access the meter. The technology based on RF is not readily accepted everywhere. In several Asian countries, the technology faces a barrier of regulations in place pertaining to use of the radio frequency of any radiated power. For example, in India the radio frequency which is generally in ISM band is not free to use even for low power radio of 10 mW. The majority of manufacturers of electricity meters have radio frequency devices in the frequency band of 433/868 MHz for large scale deployment in European countries. The frequency band of 2.4 GHz can be now used in India for outdoor as well as indoor applications, but few manufacturers have shown products within this frequency band. Initiatives in radio frequency AMR in such countries are being taken up with regulators wherever the cost of licensing outweighs the benefits of AMR. ==== Handheld ==== In handheld AMR, a meter reader carries a handheld computer with a built-in or attached receiver/transceiver (radio frequency or touch) to collect meter readings from an AMR capable meter. This is sometimes referred to as "walk-by" meter reading since the meter reader walks by the locations where meters are installed as they go through their meter reading route. Handheld computers may also be used to manually enter readings without the use of AMR technology as an alternate but this will not support exhaustive data which can be accurately read using the meter reading electronically. ==== Mobile ==== Mobile or "drive-by" meter reading is where a reading device is installed in a vehicle. The meter reader drives the vehicle while the reading device automatically collects the meter readings. Often, for mobile meter reading, the reading equipment includes navigational and mapping features provided by GPS and mapping software. With mobile meter reading, the reader does not normally have to read the meters in any particular route order, but just drives the service area until all meters are read. Components often consist of a laptop or proprietary computer, software, RF receiver/transceiver, and external vehicle antennas. ==== Satellite ==== Transmitters for data collection satellites can be installed in the field next to existing meters. The satellite AMR devices communicate with the meter for readings, and then sends those readings over a fixed or mobile satellite network. This network requires a clear view to the sky for the satellite transmitter/receiver, but eliminates the need to install fixed towers or send out field technicians, thereby being particularly suited for areas with low geographic meter density. ==== RF technologies commonly used for AMR ==== Narrow Band (single fixed radio frequency) Spread spectrum Direct-sequence spread spectrum (DSSS) Frequency-hopping spread spectrum (FHSS) There are also meters using AMR with RF technologies such as cellular phone data systems, Zigbee, Bluetooth, Wavenis and others. Some systems operate with U.S. Federal Communications Commission (FCC) licensed frequencies and others under FCC Part 15, which allows use of unlicensed radio frequencies. ==== Wi-Fi ==== WiSmart is a versatile platform which can be used by a variety of electrical home appliances in order to provide wireless TCP/IP communication using the 802.11 b/g protocol. Devices such as the Smart Thermostat permit a utility to lower a home's power consumption to help manage power demand. The city of Corpus Christi became one of the first cities in the United States to implement citywide Wi-Fi, which had been free until May 31, 2007, mainly to facilitate AMR after a meter reader was attacked by a dog. Today many meters are designed to transmit using Wi-Fi, even if a Wi-Fi network is not available, and they are read using a drive-by local Wi-Fi hand held receiver. The meters installed in Corpus Christi are not directly Wi-Fi enabled, but rather transmit narrow-band burst telemetry on the 460 MHz band. This narrow-band signal has much greater range than Wi-Fi, so the number of receivers required for the project are far fewer. Special receiver stations then decode the narrow-band signals and resend the data via Wi-Fi. Most of the automated utility meters installed in the Corpus Christi area are battery powered. Wi-Fi technology is unsuitable for long-term battery-powered operation. === Power line communication === PLC is a method where electronic data is transmitted over power lines back to the substation, then relayed to a central computer in the utility's main office. This would be considered a type of fixed network system—the network being the distribution network which the utility has built and maintains to deliver electric power. Such systems are primarily used for electric meter reading. Some providers have interfaced gas and water meters to feed into a PLC type system. == Brief history == In 1972, Theodore George "Ted" Paraskevakos, while working with Boeing in Huntsville, Alabama, developed a sensor monitoring system which used digital transmission for security, fire and medical alarm systems as well as meter reading capabilities for all utilities. This technology was a spin-off of the automatic telephone line identification system, now known as caller ID. In 1974, Paraskevakos was awarded a U.S. patent for this technology. In 1977, he launched Metretek, Inc., which developed and produced the first fully automated, commercially available remote meter reading and load management system. Since this system was developed pre-Internet, Metret

  Read more →
• 

  Cognitive computer

  A cognitive computer is a computer that hardwires artificial intelligence and machine learning algorithms into an integrated circuit that closely reproduces the behavior of the human brain. It generally adopts a neuromorphic engineering approach. Synonyms include neuromorphic chip and cognitive chip. In 2023, IBM's proof-of-concept NorthPole chip (optimized for 2-, 4- and 8-bit precision) achieved remarkable performance in image recognition. In 2013, IBM developed Watson, a cognitive computer that uses neural networks and deep learning techniques. The following year, it developed the 2014 TrueNorth microchip architecture which is designed to be closer in structure to the human brain than the von Neumann architecture used in conventional computers. In 2017, Intel also announced its version of a cognitive chip in "Loihi, which it intended to be available to university and research labs in 2018. Intel (most notably with its Pohoiki Beach and Springs systems), Qualcomm, and others are improving neuromorphic processors steadily. == IBM TrueNorth chip == TrueNorth was a neuromorphic CMOS integrated circuit produced by IBM in 2014. It is a manycore processor network on a chip design, with 4096 cores, each one having 256 programmable simulated neurons for a total of just over a million neurons. In turn, each neuron has 256 programmable "synapses" that convey the signals between them. Hence, the total number of programmable synapses is just over 268 million (228). Its basic transistor count is 5.4 billion. In 2023 Zhejiang University and Alibaba developed Darwin a neuromorphic chip The darwin3 chip was designed around 2023 so it is fairly modern compared to IBM's TrueNorth or Intel's LoihI. === Details === Memory, computation, and communication are handled in each of the 4096 neurosynaptic cores, TrueNorth circumvents the von Neumann-architecture bottleneck and is very energy-efficient, with IBM claiming a power consumption of 70 milliwatts and a power density that is 1/10,000th of conventional microprocessors. The SyNAPSE chip operates at lower temperatures and power because it only draws power necessary for computation. Skyrmions have been proposed as models of the synapse on a chip. The neurons are emulated using a Linear-Leak Integrate-and-Fire (LLIF) model, a simplification of the leaky integrate-and-fire model. According to IBM, it does not have a clock, operates on unary numbers, and computes by counting to a maximum of 19 bits. The cores are event-driven by using both synchronous and asynchronous logic, and are interconnected through an asynchronous packet-switched mesh network on chip (NOC). IBM developed a new network to program and use TrueNorth. It included a simulator, a new programming language, an integrated programming environment, and libraries. This lack of backward compatibility with any previous technology (e.g., C++ compilers) poses serious vendor lock-in risks and other adverse consequences that may prevent it from commercialization in the future. === Research === In 2018, a cluster of TrueNorth network-linked to a master computer was used in stereo vision research that attempted to extract the depth of rapidly moving objects in a scene. == IBM NorthPole chip == In 2023, IBM released its NorthPole chip, which is a proof-of-concept for dramatically improving performance by intertwining compute with memory on-chip, thus eliminating the Von Neumann bottleneck. It blends approaches from IBM's 2014 TrueNorth system with modern hardware designs to achieve speeds about 4,000 times faster than TrueNorth. It can run ResNet-50 or Yolo-v4 image recognition tasks about 22 times faster, with 25 times less energy and 5 times less space, when compared to GPUs which use the same 12-nm node process that it was fabricated with. It includes 224 MB of RAM and 256 processor cores and can perform 2,048 operations per core per cycle at 8-bit precision, and 8,192 operations at 2-bit precision. It runs at between 25 and 425 MHz. This is an inferencing chip, but it cannot yet handle GPT-4 because of memory and accuracy limitations == Intel Loihi chip == === Pohoiki Springs === Pohoiki Springs is a system that incorporates Intel's self-learning neuromorphic chip, named Loihi, introduced in 2017, perhaps named after the Hawaiian seamount Lōʻihi. Intel claims Loihi is about 1000 times more energy efficient than general-purpose computing systems used to train neural networks. In theory, Loihi supports both machine learning training and inference on the same silicon independently of a cloud connection, and more efficiently than convolutional neural networks or deep learning neural networks. Intel points to a system for monitoring a person's heartbeat, taking readings after events such as exercise or eating, and using the chip to normalize the data and work out the ‘normal’ heartbeat. It can then spot abnormalities and deal with new events or conditions. The first iteration of the chip was made using Intel's 14 nm fabrication process and houses 128 clusters of 1,024 artificial neurons each for a total of 131,072 simulated neurons. This offers around 130 million synapses, far less than the human brain's 800 trillion synapses, and behind IBM's TrueNorth. Loihi is available for research purposes among more than 40 academic research groups as a USB form factor. In October 2019, researchers from Rutgers University published a research paper to demonstrate the energy efficiency of Intel's Loihi in solving simultaneous localization and mapping. In March 2020, Intel and Cornell University published a research paper to demonstrate the ability of Intel's Loihi to recognize different hazardous materials, which could eventually aid to "diagnose diseases, detect weapons and explosives, find narcotics, and spot signs of smoke and carbon monoxide". === Pohoiki Beach === Intel's Loihi 2, named Pohoiki Beach, was released in September 2021 with 64 cores. It boasts faster speeds, higher-bandwidth inter-chip communications for enhanced scalability, increased capacity per chip, a more compact size due to process scaling, and improved programmability. === Hala Point === Hala Point packages 1,152 Loihi 2 processors produced on Intel 3 process node in a six-rack-unit chassis. The system supports up to 1.15 billion neurons and 128 billion synapses distributed over 140,544 neuromorphic processing cores, consuming 2,600 watts of power. It includes over 2,300 embedded x86 processors for ancillary computations. Intel claimed in 2024 that Hala Point was the world’s largest neuromorphic system. It uses Loihi 2 chips. It is claimed to offer 10x more neuron capacity and up to 12x higher performance. The Darwin3 chip exceeds these specs. Hala Point provides up to 20 quadrillion operations per second, (20 petaops), with efficiency exceeding 15 trillion (8-bit) operations s−1 W−1 on conventional deep neural networks. Hala Point integrates processing, memory and communication channels in a massively parallelized fabric, providing 16 PB s−1 of memory bandwidth, 3.5 PB s−1 of inter-core communication bandwidth, and 5 TB s−1 of inter-chip bandwidth. The system can process its 1.15 billion neurons 20 times faster than a human brain. Its neuron capacity is roughly equivalent to that of an owl brain or the cortex of a capuchin monkey. Loihi-based systems can perform inference and optimization using 100 times less energy at speeds as much as 50 times faster than CPU/GPU architectures. Intel claims that Hala Point can create LLMs. Much further research is needed == SpiNNaker == SpiNNaker (Spiking Neural Network Architecture) is a massively parallel, manycore supercomputer architecture designed by the Advanced Processor Technologies Research Group at the Department of Computer Science, University of Manchester. == Criticism == Critics argue that a room-sized computer – as in the case of IBM's Watson – is not a viable alternative to a three-pound human brain. Some also cite the difficulty for a single system to bring so many elements together, such as the disparate sources of information as well as computing resources. In 2021, The New York Times released Steve Lohr's article "What Ever Happened to IBM’s Watson?". He wrote about some costly failures of IBM Watson. One of them, a cancer-related project called the Oncology Expert Advisor, was abandoned in 2016 as a costly failure. During the collaboration, Watson could not use patient data. Watson struggled to decipher doctors’ notes and patient histories. The development of LLMs has placed a new emphasis on cognitive computers, because the Transformer technology that underpins LLMs demands huge energy for GPUs and PCs. Cognitive computers use significantly less energy, but the details of STDPs and neuron models cannot yet match the accuracy of backprop, and so ANN to SNN weight translations such as QAT and PQT or progressive quantization are becoming popular, with their own limitations.

  Read more →
• 

  Xu Li (computer scientist)

  Xu Li is a Chinese computer scientist and co-founder and current CEO of SenseTime, an artificial intelligence (AI) company. Xu has led SenseTime since the company's incorporation and helped it independently develop its proprietary deep learning platform. == Education and research == Xu obtained both his bachelor's and master's degrees in computer science from Shanghai Jiao Tong University. He received his doctorate in computer science from the Chinese University of Hong Kong. Xu has published more than 50 papers at international conferences and in journals in the field of computer vision and won the Best Paper Award at the international conference on Non-Photorealistic Rendering and Animation (NPAR) 2012 and the Best Reviewer Award at the international conferences Asian Conference on Computer Vision ACCV 2012 and International Conference on Computer Vision (ICCV) 2015. He has three algorithms that have been included into the visual open-source platform OpenCV, and his "L0 Smoothing" algorithm garnered the most citations in research papers over a span of five years (2011–2015) within the ACM Transactions on Graphics (TOG), a scientific journal that Thomson Reuters InCites has placed first among software engineering journals. == Career == Previously, Xu worked at Lenovo Corporate Research & Development. He was also a visiting researcher at Motorola China R&D Institute, Omron Research Institute, and Microsoft Research. == Selected publications == Jimmy Ren, Xiaohao Chen, Jianbo Liu, Wenxiu Sun, Li Xu, Jiahao Pang, Qiong Yan, Yu-wing Tai, "Accurate Single Stage Detector Using Recurrent Rolling Convolution", (CVPR), 2017. Jimmy SJ. Ren, Yongtao Hu, Yu-Wing Tai, Chuan Wang, Li Xu, Wenxiu Sun, Qiong Yan, "Look, Listen and Learn – A Multimodal LSTM for Speaker Identification", The 30th AAAI Conference on Artificial Intelligence (AAAI), 2016 Jimmy SJ. Ren, Li Xu, Qiong Yan, Wenxiu Sun, "Shepard Convolutional Neural Networks" Advances in Neural Information Processing Systems (NIPS), 2015. Xiaoyong Shen, Chao Zhou, Li Xu, Jiaya Jia, "Mutual-Structure for Joint Filtering" International Conference on Computer Vision (ICCV), (oral presentation), 2015. Jianping Shi, Qiong Yan, Li Xu, Jiaya Jia, "Hierarchical Image Saliency Detection on Extended CSSD" IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI), 2015. Jianping Shi, Xin Tao, Li Xu, Jiaya Jia, "Break Ames Room Illusion: Depth from General Single Images" ACM Transactions on Graphics (TOG), (Proc. ACM SIGGRAPH ASIA2015). Yongtao Hu, Jimmy SJ. Ren, Jingwen Dai, Chang Yuan, Li Xu, Wenping Wang, "Deep Multimodal Speaker Naming" ACM International Conference on Multimedia (MM), 2015. Li Xu, Jimmy SJ. Ren, Qiong Yan, Renjie Liao, Jiaya Jia "Deep Edge-Aware Filters" International Conference on Machine Learning (ICML), 2015. Jianping Shi, Li Xu, Jiaya Jia "Just Noticeable Defocus Blur Detection and Estimation" IEEE Conference on Computer Vision and Pattern Recognition (CVPR), 2015. Ziyang Ma, Renjie Liao, Xin Tao, Li Xu, Jiaya Jia, Enhua Wu "Handling Motion Blur in Multi-Frame Super-Resolution" IEEE Conference on Computer Vision and Pattern Recognition (CVPR), 2015. Xiaoyong Shen, Qiong Yan, Li Xu, Lizhuang Ma, Jiaya Jia"Multispectral Joint Image Restoration via Optimizing a Scale Map" IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI), 2015. Jimmy SJ. Ren, Li Xu, "On Vectorization of Deep Convolutional Neural Networks for Vision Tasks" AAAI Conference on Artificial Intelligence (AAAI), 2015. == Awards and honors == Xu was ranked 7th in Fortune magazine's 2018 edition of its 40 Under 40. He was also named "China's Outstanding AI Industry Leader" by The Economic Observer, received the "Innovative Business Leader" Award under NetEase's "Future Technology Talent Awards", and was honored as Sina's "2017 Top Ten Economic Figures". In 2018, Xu was named EY's "Entrepreneur of the Year China" in the Technology category.

  Read more →
• 

  The Best Free AI Clip Maker for Beginners

  Looking for the best AI clip maker? An AI clip maker is software that uses machine learning to help you get more done — it can save you hours every week by automating repetitive work. Most options offer a generous free tier, with paid plans unlocking higher limits, faster processing, and team features. Whether you are a beginner or a pro, the right AI clip maker slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.

  Read more →
• 

  Intrinsic dimension

  In mathematics, the intrinsic dimension of a subset can be thought of as the minimal number of variables needed to represent the subset. The concept has widespread applications in geometry, dynamical systems, signal processing, statistics, and other fields. Due to its widespread applications and vague conceptualization, there are many different ways to define it rigorously. Consequently, the same set might have different intrinsic dimensions according to different definitions. The intrinsic dimension can be used as a lower bound of what dimension it is possible to compress a data set into through dimension reduction, but it can also be used as a measure of the complexity of the data set or signal. For a data set or signal of N variables, its intrinsic dimension M satisfies 0 ≤ M ≤ N, although estimators may yield higher values. == Exact dimension == === Differential === In differential geometry, given a differentiable manifold N and a submanifold M, the intrinsic dimension of M is its dimension. Suppose N has n dimensions and M has m dimensions, then that means around any point in M, there exists a local coordinate system ( x 1 , … , x m , x m + 1 , … , x n ) {\displaystyle (x_{1},\dots ,x_{m},x_{m+1},\dots ,x_{n})} of N, such that the manifold M is simply the subset of N defined by x m + 1 = 0 , … , x n = 0 {\displaystyle x_{m+1}=0,\dots ,x_{n}=0} . === Metric === Given a mere metric space, we can still define its intrinsic dimension. The most general case is the Hausdorff dimension, though for metric spaces occurring in practice, the box-counting dimension and the packing dimension often are identical to the Hausdorff dimension. Let X , d {\textstyle X,d} be a metric space and A ⊂ X {\textstyle A\subset X} be totally bounded. Define the covering number N ( A , ε ) = min { k : A ⊂ ⋃ i = 1 k B ( x i , ε ) } . {\displaystyle N(A,\varepsilon )=\min \left\{k:A\subset \bigcup _{i=1}^{k}B\left(x_{i},\varepsilon \right)\right\}.} The metric entropy is H ( A , ε ) = log ⁡ N ( A , ε ) {\textstyle H(A,\varepsilon )=\log N(A,\varepsilon )} (any log base). The upper and lower metric entropy dimensions are dim ¯ E A = lim sup ε ↓ 0 H ( A , ε ) log ⁡ ( 1 / ε ) , dim _ E A = lim inf ε ↓ 0 H ( A , ε ) log ⁡ ( 1 / ε ) . {\displaystyle {\overline {\dim }}_{E}A=\limsup _{\varepsilon \downarrow 0}{\frac {H(A,\varepsilon )}{\log(1/\varepsilon )}},\quad {\underline {\dim }}_{E}A=\liminf _{\varepsilon \downarrow 0}{\frac {H(A,\varepsilon )}{\log(1/\varepsilon )}}.} If they are equal, then dim E ⁡ A {\textstyle \operatorname {dim} _{E}A} is that common value, called the metric entropy dimension. The entropy dimensions are usually used in information theory, and especially coding theory, since entropy is involved in its definition. === Topological === If X {\displaystyle X} is merely a topological space, then we can still define its intrinsic dimension, using the topological dimension or Lebesgue covering dimension. An open cover of a topological space X is a family of open sets Uα such that their union is the whole space, ∪ α {\displaystyle \cup _{\alpha }} Uα = X. The order or ply of an open cover A {\displaystyle {\mathfrak {A}}} = {Uα} is the smallest number m (if it exists) for which each point of the space belongs to at most m open sets in the cover: in other words Uα1 ∩ ⋅⋅⋅ ∩ Uαm+1 = ∅ {\displaystyle \emptyset } for α1, ..., αm+1 distinct. A refinement of an open cover A {\displaystyle {\mathfrak {A}}} = {Uα} is another open cover B {\displaystyle {\mathfrak {B}}} = {Vβ}, such that each Vβ is contained in some Uα. The covering dimension of a topological space X is defined to be the minimum value of n such that every finite open cover A {\displaystyle {\mathfrak {A}}} of X has an open refinement B {\displaystyle {\mathfrak {B}}} with order n + 1. The refinement B {\displaystyle {\mathfrak {B}}} can always be chosen to be finite. Thus, if n is finite, Vβ1 ∩ ⋅⋅⋅ ∩ Vβn+2 = ∅ {\displaystyle \emptyset } for β1, ..., βn+2 distinct. If no such minimal n exists, the space is said to have infinite covering dimension. == Introductory example == Let f ( x 1 , x 2 ) {\textstyle f(x_{1},x_{2})} be a two-variable function (or signal) which is of the form f ( x 1 , x 2 ) = g ( x 1 ) {\textstyle f(x_{1},x_{2})=g(x_{1})} for some one-variable function g which is not constant. This means that f varies, in accordance to g, with the first variable or along the first coordinate. On the other hand, f is constant with respect to the second variable or along the second coordinate. It is only necessary to know the value of one, namely the first, variable in order to determine the value of f. Hence, it is a two-variable function but its intrinsic dimension is one. A slightly more complicated example is f ( x 1 , x 2 ) = g ( x 1 + x 2 ) {\textstyle f(x_{1},x_{2})=g(x_{1}+x_{2})} . f is still intrinsic one-dimensional, which can be seen by making a variable transformation y 1 = x 1 + x 2 {\textstyle y_{1}=x_{1}+x_{2}} and y 2 = x 1 − x 2 {\textstyle y_{2}=x_{1}-x_{2}} which gives f ( y 1 + y 2 2 , y 1 − y 2 2 ) = g ( y 1 ) {\textstyle f\left({\frac {y_{1}+y_{2}}{2}},{\frac {y_{1}-y_{2}}{2}}\right)=g\left(y_{1}\right)} . Since the variation in f can be described by the single variable y1 its intrinsic dimension is one. For the case that f is constant, its intrinsic dimension is zero since no variable is needed to describe variation. For the general case, when the intrinsic dimension of the two-variable function f is neither zero or one, it is two. In the literature, functions which are of intrinsic dimension zero, one, or two are sometimes referred to as i0D, i1D or i2D, respectively. == Signal processing == In signal processing of multidimensional signals, the intrinsic dimension of the signal describes how many variables are needed to generate a good approximation of the signal. For an N-variable function f, the set of variables can be represented as an N-dimensional vector x: f = f ( x ) where x = ( x 1 , … , x N ) {\textstyle f=f\left(\mathbf {x} \right){\text{ where }}\mathbf {x} =\left(x_{1},\dots ,x_{N}\right)} . If for some M-variable function g and M × N matrix A it is the case that for all x; f ( x ) = g ( A x ) , {\textstyle f(\mathbf {x} )=g(\mathbf {Ax} ),} M is the smallest number for which the above relation between f and g can be found, then the intrinsic dimension of f is M. The intrinsic dimension is a characterization of f, it is not an unambiguous characterization of g nor of A. That is, if the above relation is satisfied for some f, g, and A, it must also be satisfied for the same f and g′ and A′ given by g ′ ( y ) = g ( B y ) {\textstyle g'\left(\mathbf {y} \right)=g\left(\mathbf {By} \right)} and A ′ = B − 1 A {\textstyle \mathbf {A'} =\mathbf {B} ^{-1}\mathbf {A} } where B is a non-singular M × M matrix, since f ( x ) = g ′ ( A ′ x ) = g ( B A ′ x ) = g ( A x ) {\textstyle f\left(\mathbf {x} \right)=g'\left(\mathbf {A'x} \right)=g\left(\mathbf {BA'x} \right)=g\left(\mathbf {Ax} \right)} . == The Fourier transform of signals of low intrinsic dimension == An N variable function which has intrinsic dimension M < N has a characteristic Fourier transform. Intuitively, since this type of function is constant along one or several dimensions its Fourier transform must appear like an impulse (the Fourier transform of a constant) along the same dimension in the frequency domain. === A simple example === Let f be a two-variable function which is i1D. This means that there exists a normalized vector n ∈ R 2 {\textstyle \mathbf {n} \in \mathbb {R} ^{2}} and a one-variable function g such that f ( x ) = g ( n T x ) {\textstyle f(\mathbf {x} )=g(\mathbf {n} ^{\operatorname {T} }\mathbf {x} )} for all x ∈ R 2 {\textstyle \mathbf {x} \in \mathbb {R} ^{2}} . If F is the Fourier transform of f (both are two-variable functions) it must be the case that F ( u ) = G ( n T u ) ⋅ δ ( m T u ) {\textstyle F\left(\mathbf {u} \right)=G\left(\mathbf {n} ^{\mathrm {T} }\mathbf {u} \right)\cdot \delta \left(\mathbf {m} ^{\mathrm {T} }\mathbf {u} \right)} . Here G is the Fourier transform of g (both are one-variable functions), δ is the Dirac impulse function and m is a normalized vector in R 2 {\textstyle \mathbb {R} ^{2}} perpendicular to n. This means that F vanishes everywhere except on a line which passes through the origin of the frequency domain and is parallel to m. Along this line F varies according to G. === The general case === Let f be an N-variable function which has intrinsic dimension M, that is, there exists an M-variable function g and M × N matrix A such that f ( x ) = g ( A x ) ∀ x {\textstyle f(\mathbf {x} )=g(\mathbf {Ax} )\quad \forall \mathbf {x} } . Its Fourier transform F can then be described as follows: F vanishes everywhere except for a subspace of dimension M The subspace M is spanned by the rows of the matrix A In the subspace, F varies according to G the Fourier transform of g == Generalizations == The type of intrinsic dimension described above assume

  Read more →
• 

  The Best Free AI Photo Editor for Beginners

  Comparing the best AI photo editor? An AI photo editor is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI photo editor slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

  Read more →
• 

  Moore machine

  In the theory of computation, a Moore machine is a finite-state machine whose current output values are determined only by its current state. This is in contrast to a Mealy machine, whose output values are determined both by its current state and by the values of its inputs. Like other finite state machines, in Moore machines, the input typically influences the next state. Thus the input may indirectly influence subsequent outputs, but not the current or immediate output. The Moore machine is named after Edward F. Moore, who presented the concept in a 1956 paper, “Gedanken-experiments on Sequential Machines.” == Formal definition == A Moore machine can be defined as a 6-tuple ( S , s 0 , Σ , Λ , δ , G ) {\displaystyle (S,s_{0},\Sigma ,\Lambda ,\delta ,G)} consisting of the following: A finite set of states S {\displaystyle S} A start state (also called initial state) s 0 {\displaystyle s_{0}} which is an element of S {\displaystyle S} A finite set called the input alphabet Σ {\displaystyle \Sigma } A finite set called the output alphabet Λ {\displaystyle \Lambda } A transition function δ : S × Σ → S {\displaystyle \delta :S\times \Sigma \rightarrow S} mapping a state and the input alphabet to the next state An output function G : S → Λ {\displaystyle G:S\rightarrow \Lambda } mapping each state to the output alphabet "Evolution across time" is realized in this abstraction by having the state machine consult the time-changing input symbol at discrete "timer ticks" t 0 , t 1 , t 2 , . . . {\displaystyle t_{0},t_{1},t_{2},...} and react according to its internal configuration at those idealized instants, or else having the state machine wait for a next input symbol (as on a FIFO) and react whenever it arrives. A Moore machine can be regarded as a restricted type of finite-state transducer. == Visual representation == === Table === A state transition table is a table listing all the triples in the transition relation δ : S × Σ → S {\displaystyle \delta :S\times \Sigma \rightarrow S} . === Diagram === The state diagram for a Moore machine, or Moore diagram, is a state diagram that associates an output value with each state. == Relationship with Mealy machines == As Moore and Mealy machines are both types of finite-state machines, they are equally expressive: either type can be used to parse a regular language. The difference between Moore machines and Mealy machines is that in the latter, the output of a transition is determined by the combination of current state and current input ( S × Σ {\displaystyle S\times \Sigma } as the domain of G {\displaystyle G} ), as opposed to just the current state ( S {\displaystyle S} as the domain of G {\displaystyle G} ). When represented as a state diagram, for a Moore machine, each node (state) is labeled with an output value; for a Mealy machine, each arc (transition) is labeled with an output value. Every Moore machine M {\displaystyle M} is equivalent to the Mealy machine with the same states and transitions and the output function G ( s , σ ) = G M ( δ M ( s , σ ) ) {\displaystyle G(s,\sigma )=G_{M}(\delta _{M}(s,\sigma ))} , which takes each state-input pair ( s , σ ) {\displaystyle (s,\sigma )} and yields G M ( δ M ( s , σ ) ) {\displaystyle G_{M}(\delta _{M}(s,\sigma ))} , where G M {\displaystyle G_{M}} is M {\displaystyle M} 's output function and δ M {\displaystyle \delta _{M}} is M {\displaystyle M} 's transition function. However, not every Mealy machine can be converted to an equivalent Moore machine. Some can be converted only to an almost equivalent Moore machine, with outputs shifted in time. This is due to the way that state labels are paired with transition labels to form the input/output pairs. Consider a transition s i → s j {\displaystyle s_{i}\rightarrow s_{j}} from state s i {\displaystyle s_{i}} to state s j {\displaystyle s_{j}} . The input causing the transition s i → s j {\displaystyle s_{i}\rightarrow s_{j}} labels the edge ( s i , s j ) {\displaystyle (s_{i},s_{j})} . The output corresponding to that input, is the label of state s i {\displaystyle s_{i}} . Notice that this is the source state of the transition. So for each input, the output is already fixed before the input is received, and depends solely on the present state. This is the original definition by E. Moore. It is a common mistake to use the label of state s j {\displaystyle s_{j}} as output for the transition s i → s j {\displaystyle s_{i}\rightarrow s_{j}} . == Examples == Types according to number of inputs/outputs. === Simple === Simple Moore machines have one input and one output: edge detector using XOR binary adding machine clocked sequential systems (a restricted form of Moore machine where the state changes only when the global clock signal changes) Most digital electronic systems are designed as clocked sequential systems. Clocked sequential systems are a restricted form of Moore machine where the state changes only when the global clock signal changes. Typically the current state is stored in flip-flops, and a global clock signal is connected to the "clock" input of the flip-flops. Clocked sequential systems are one way to solve metastability problems. A typical electronic Moore machine includes a combinational logic chain to decode the current state into the outputs (lambda). The instant the current state changes, those changes ripple through that chain, and almost instantaneously the output gets updated. There are design techniques to ensure that no glitches occur on the outputs during that brief period while those changes are rippling through the chain, but most systems are designed so that glitches during that brief transition time are ignored or are irrelevant. The outputs then stay the same indefinitely (LEDs stay bright, power stays connected to the motors, solenoids stay energized, etc.), until the Moore machine changes state again. ==== Worked example ==== A sequential network has one input and one output. The output becomes 1 and remains 1 thereafter when at least two 0's and two 1's have occurred as inputs. A Moore machine with nine states for the above description is shown on the right. The initial state is state A, and the final state is state I. The state table for this example is as follows: === Complex === More complex Moore machines can have multiple inputs as well as multiple outputs. == Gedanken-experiments == In Moore's 1956 paper "Gedanken-experiments on Sequential Machines", the ( n ; m ; p ) {\displaystyle (n;m;p)} automata (or machines) S {\displaystyle S} are defined as having n {\displaystyle n} states, m {\displaystyle m} input symbols and p {\displaystyle p} output symbols. Nine theorems are proved about the structure of S {\displaystyle S} , and experiments with S {\displaystyle S} . Later, " S {\displaystyle S} machines" became known as "Moore machines". At the end of the paper, in Section "Further problems", the following task is stated: Another directly following problem is the improvement of the bounds given at the theorems 8 and 9. Moore's Theorem 8 is formulated as: Given an arbitrary ( n ; m ; p ) {\displaystyle (n;m;p)} machine S {\displaystyle S} , such that every two of its states are distinguishable from one another, then there exists an experiment of length n ( n − 1 ) 2 {\displaystyle {\tfrac {n(n-1)}{2}}} which determines the state of S {\displaystyle S} at the end of the experiment. In 1957, A. A. Karatsuba proved the following two theorems, which completely solved Moore's problem on the improvement of the bounds of the experiment length of his "Theorem 8". Theorem A. If S {\displaystyle S} is an ( n ; m ; p ) {\displaystyle (n;m;p)} machine, such that every two of its states are distinguishable from one another, then there exists a branched experiment of length at most ( n − 1 ) ( n − 2 ) 2 + 1 {\displaystyle {\tfrac {(n-1)(n-2)}{2}}+1} through which one may determine the state of S {\displaystyle S} at the end of the experiment. Theorem B. There exists an ( n ; m ; p ) {\displaystyle (n;m;p)} machine, every two states of which are distinguishable from one another, such that the length of the shortest experiments establishing the state of the machine at the end of the experiment is equal to ( n − 1 ) ( n − 2 ) 2 + 1 {\displaystyle {\tfrac {(n-1)(n-2)}{2}}+1} . Theorems A and B were used for the basis of the course work of a student of the fourth year, A. A. Karatsuba, "On a problem from the automata theory", which was distinguished by testimonial reference at the competition of student works of the faculty of mechanics and mathematics of Moscow State University in 1958. The paper by Karatsuba was given to the journal Uspekhi Mat. Nauk on 17 December 1958 and was published there in June 1960. Until the present day (2011), Karatsuba's result on the length of experiments is the only exact nonlinear result, both in automata theory, and in similar problems of computational complexity theory.

  Read more →
• 

  Erkki Oja

  Erkki Oja (born 22 March 1948) is a Finnish computer scientist and Aalto Distinguished Professor in the Department of Information and Computer Science at Aalto University School of Science. He is recognized for developing Oja's rule, which is a model of how neurons in the brain or in artificial neural networks learn over time. == Early life and education == Oja was born in Helsinki and studied at Helsinki University of Technology, where he received his diploma engineer in 1972, licentiate in technology in 1975 and Doctor of Technology in 1977. == Career == Oja was a research associate at the Center for Cognitive Science at Brown University between 1977 and 1978 and a research fellow at the Academy of Finland from 1976 to 1981. Since 1981, he took up a professorship in applied mathematics at Kuopio University (now University of Eastern Finland). He was a visiting research scholar at Tokyo Institute of Technology from 1983 to 1984. From 1987 to 1993, he was a professor in computer science at the Lappeenranta University of Technology. He moved back to the Helsinki University of Technology (now Aalto University) from 1993 as a professor in computer science. He retired in 2015. == Honors and awards == Oja is a Fellow of the International Association for Pattern Recognition and the IEEE, and a member of the Finnish Academy of Sciences. He served as chairman of the European Neural Network Society between 2000 and 2005, and as the chairman of the Academy of Finland’s Research Council for Natural Sciences and Engineering between 2007 and 2012. He was awarded the Frank Rosenblatt Award for his contributions to artificial intelligence research in 2019. Oja was a member of the Board of Governors for the International Neural Network Society (INNIS) in 2003. He received honorary doctorates from Uppsala University and Lappeenranta University of Technology in 2008.

  Read more →
• 

  Gonioreflectometer

  A gonioreflectometer is a device for measuring a bidirectional reflectance distribution function (BRDF). The device consists of a light source illuminating the material to be measured and a sensor that captures light reflected from that material. The light source should be able to illuminate and the sensor should be able to capture data from a hemisphere around the target. The hemispherical rotation dimensions of the sensor and light source are the four dimensions of the BRDF. The 'gonio' part of the word refers to the device's ability to measure at different angles. Several similar devices have been built and used to capture data for similar functions. Most of these devices use a camera instead of the light intensity-measuring sensor to capture a two-dimensional sample of the target. Examples include: a spatial gonioreflectometer for capturing the SBRDF (McAllister, 2002). a camera gantry for capturing the light field (Levoy and Hanrahan, 1996). an unnamed device for capturing the bidirectional texture function (Dana et al., 1999).

  Read more →
• 

  Best AI Image Generators in 2026

  Comparing the best AI image generator? An AI image generator is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI image generator slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

  Read more →
• 

  AI Background Removers Reviews: What Actually Works in 2026

  Trying to pick the best AI background remover? An AI background remover is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI background remover slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

  Read more →
• 

  Baum–Welch algorithm

  In electrical engineering, statistical computing and bioinformatics, the Baum–Welch algorithm is a special case of the expectation–maximization algorithm used to find the unknown parameters of a hidden Markov model (HMM). It makes use of the forward-backward algorithm to compute the statistics for the expectation step. The Baum–Welch algorithm, the primary method for inference in hidden Markov models, is numerically unstable due to its recursive calculation of joint probabilities. As the number of variables grows, these joint probabilities become increasingly small, leading to the forward recursions rapidly approaching values below machine precision. == History == The Baum–Welch algorithm was named after its inventors Leonard E. Baum and Lloyd R. Welch. The algorithm and the Hidden Markov models were first described in a series of articles by Baum and his peers at the IDA Center for Communications Research, Princeton in the late 1960s and early 1970s. One of the first major applications of HMMs was to the field of speech processing. In the 1980s, HMMs were emerging as a useful tool in the analysis of biological systems and information, and in particular genetic information. They have since become an important tool in the probabilistic modeling of genomic sequences. == Description == A hidden Markov model describes the joint probability of a collection of "hidden" and observed discrete random variables. It relies on the assumption that the i-th hidden variable given the (i − 1)-th hidden variable is independent of previous hidden variables, and the current observation variables depend only on the current hidden state. The Baum–Welch algorithm uses the well known EM algorithm to find the maximum likelihood estimate of the parameters of a hidden Markov model given a set of observed feature vectors. Let X t {\displaystyle X_{t}} be a discrete hidden random variable with N {\displaystyle N} possible values (i.e. We assume there are N {\displaystyle N} states in total). We assume the P ( X t ∣ X t − 1 ) {\displaystyle P(X_{t}\mid X_{t-1})} is independent of time t {\displaystyle t} , which leads to the definition of the time-independent stochastic transition matrix A = { a i j } = P ( X t = j ∣ X t − 1 = i ) . {\displaystyle A=\{a_{ij}\}=P(X_{t}=j\mid X_{t-1}=i).} The initial state distribution (i.e. when t = 1 {\displaystyle t=1} ) is given by π i = P ( X 1 = i ) . {\displaystyle \pi _{i}=P(X_{1}=i).} The observation variables Y t {\displaystyle Y_{t}} can take one of K {\displaystyle K} possible values. We also assume the observation given the "hidden" state is time independent. The probability of a certain observation y i {\displaystyle y_{i}} at time t {\displaystyle t} for state X t = j {\displaystyle X_{t}=j} is given by b j ( y i ) = P ( Y t = y i ∣ X t = j ) . {\displaystyle b_{j}(y_{i})=P(Y_{t}=y_{i}\mid X_{t}=j).} Taking into account all the possible values of Y t {\displaystyle Y_{t}} and X t {\displaystyle X_{t}} , we obtain the N × K {\displaystyle N\times K} matrix B = { b j ( y i ) } {\displaystyle B=\{b_{j}(y_{i})\}} where b j {\displaystyle b_{j}} belongs to all the possible states and y i {\displaystyle y_{i}} belongs to all the observations. An observation sequence is given by Y = ( Y 1 = y 1 , Y 2 = y 2 , … , Y T = y T ) {\displaystyle Y=(Y_{1}=y_{1},Y_{2}=y_{2},\ldots ,Y_{T}=y_{T})} . Thus we can describe a hidden Markov chain by θ = ( A , B , π ) {\displaystyle \theta =(A,B,\pi )} . The Baum–Welch algorithm finds a local maximum for θ ∗ = a r g m a x θ ⁡ P ( Y ∣ θ ) {\displaystyle \theta ^{}=\operatorname {arg\,max} _{\theta }P(Y\mid \theta )} (i.e. the HMM parameters θ {\displaystyle \theta } that maximize the probability of the observation). === Algorithm === Set θ = ( A , B , π ) {\displaystyle \theta =(A,B,\pi )} with random initial conditions. They can also be set using prior information about the parameters if it is available; this can speed up the algorithm and also steer it toward the desired local maximum. ==== Forward procedure ==== Let α i ( t ) = P ( Y 1 = y 1 , … , Y t = y t , X t = i ∣ θ ) {\displaystyle \alpha _{i}(t)=P(Y_{1}=y_{1},\ldots ,Y_{t}=y_{t},X_{t}=i\mid \theta )} , the probability of seeing the observations y 1 , y 2 , … , y t {\displaystyle y_{1},y_{2},\ldots ,y_{t}} and being in state i {\displaystyle i} at time t {\displaystyle t} . This is found recursively: α i ( 1 ) = π i b i ( y 1 ) , {\displaystyle \alpha _{i}(1)=\pi _{i}b_{i}(y_{1}),} α i ( t + 1 ) = b i ( y t + 1 ) ∑ j = 1 N α j ( t ) a j i . {\displaystyle \alpha _{i}(t+1)=b_{i}(y_{t+1})\sum _{j=1}^{N}\alpha _{j}(t)a_{ji}.} Since this series converges exponentially to zero, the algorithm will numerically underflow for longer sequences. However, this can be avoided in a slightly modified algorithm by scaling α {\displaystyle \alpha } in the forward and β {\displaystyle \beta } in the backward procedure below. ==== Backward procedure ==== Let β i ( t ) = P ( Y t + 1 = y t + 1 , … , Y T = y T ∣ X t = i , θ ) {\displaystyle \beta _{i}(t)=P(Y_{t+1}=y_{t+1},\ldots ,Y_{T}=y_{T}\mid X_{t}=i,\theta )} that is the probability of the ending partial sequence y t + 1 , … , y T {\displaystyle y_{t+1},\ldots ,y_{T}} given starting state i {\displaystyle i} at time t {\displaystyle t} . We calculate β i ( t ) {\displaystyle \beta _{i}(t)} as, β i ( T ) = 1 , {\displaystyle \beta _{i}(T)=1,} β i ( t ) = ∑ j = 1 N β j ( t + 1 ) a i j b j ( y t + 1 ) . {\displaystyle \beta _{i}(t)=\sum _{j=1}^{N}\beta _{j}(t+1)a_{ij}b_{j}(y_{t+1}).} ==== Update ==== We can now calculate the temporary variables, according to Bayes' theorem: γ i ( t ) = P ( X t = i ∣ Y , θ ) = P ( X t = i , Y ∣ θ ) P ( Y ∣ θ ) = α i ( t ) β i ( t ) ∑ j = 1 N α j ( t ) β j ( t ) , {\displaystyle \gamma _{i}(t)=P(X_{t}=i\mid Y,\theta )={\frac {P(X_{t}=i,Y\mid \theta )}{P(Y\mid \theta )}}={\frac {\alpha _{i}(t)\beta _{i}(t)}{\sum _{j=1}^{N}\alpha _{j}(t)\beta _{j}(t)}},} which is the probability of being in state i {\displaystyle i} at time t {\displaystyle t} given the observed sequence Y {\displaystyle Y} and the parameters θ {\displaystyle \theta } ξ i j ( t ) = P ( X t = i , X t + 1 = j ∣ Y , θ ) = P ( X t = i , X t + 1 = j , Y ∣ θ ) P ( Y ∣ θ ) = α i ( t ) a i j β j ( t + 1 ) b j ( y t + 1 ) ∑ k = 1 N ∑ w = 1 N α k ( t ) a k w β w ( t + 1 ) b w ( y t + 1 ) , {\displaystyle \xi _{ij}(t)=P(X_{t}=i,X_{t+1}=j\mid Y,\theta )={\frac {P(X_{t}=i,X_{t+1}=j,Y\mid \theta )}{P(Y\mid \theta )}}={\frac {\alpha _{i}(t)a_{ij}\beta _{j}(t+1)b_{j}(y_{t+1})}{\sum _{k=1}^{N}\sum _{w=1}^{N}\alpha _{k}(t)a_{kw}\beta _{w}(t+1)b_{w}(y_{t+1})}},} which is the probability of being in state i {\displaystyle i} and j {\displaystyle j} at times t {\displaystyle t} and t + 1 {\displaystyle t+1} respectively given the observed sequence Y {\displaystyle Y} and parameters θ {\displaystyle \theta } . The denominators of γ i ( t ) {\displaystyle \gamma _{i}(t)} and ξ i j ( t ) {\displaystyle \xi _{ij}(t)} are the same ; they represent the probability of making the observation Y {\displaystyle Y} given the parameters θ {\displaystyle \theta } . The parameters of the hidden Markov model θ {\displaystyle \theta } can now be updated: π i ∗ = γ i ( 1 ) , {\displaystyle \pi _{i}^{}=\gamma _{i}(1),} which is the expected frequency spent in state i {\displaystyle i} at time 1 {\displaystyle 1} . a i j ∗ = ∑ t = 1 T − 1 ξ i j ( t ) ∑ t = 1 T − 1 γ i ( t ) , {\displaystyle a_{ij}^{}={\frac {\sum _{t=1}^{T-1}\xi _{ij}(t)}{\sum _{t=1}^{T-1}\gamma _{i}(t)}},} which is the expected number of transitions from state i to state j compared to the expected total number of transitions starting in state i, including from state i to itself. The number of transitions starting in state i is equivalent to the number of times state i is observed in the sequence from t = 1 to t = T − 1. b i ∗ ( v k ) = ∑ t = 1 T 1 y t = v k γ i ( t ) ∑ t = 1 T γ i ( t ) , {\displaystyle b_{i}^{}(v_{k})={\frac {\sum _{t=1}^{T}1_{y_{t}=v_{k}}\gamma _{i}(t)}{\sum _{t=1}^{T}\gamma _{i}(t)}},} where 1 y t = v k = { 1 if y t = v k , 0 otherwise {\displaystyle 1_{y_{t}=v_{k}}={\begin{cases}1&{\text{if }}y_{t}=v_{k},\\0&{\text{otherwise}}\end{cases}}} is an indicator function, and b i ∗ ( v k ) {\displaystyle b_{i}^{}(v_{k})} is the expected number of times the output observations have been equal to v k {\displaystyle v_{k}} while in state i {\displaystyle i} over the expected total number of times in state i {\displaystyle i} . These steps are now repeated iteratively until a desired level of convergence. Note: It is possible to over-fit a particular data set. That is, P ( Y ∣ θ final ) > P ( Y ∣ θ true ) {\displaystyle P(Y\mid \theta _{\text{final}})>P(Y\mid \theta _{\text{true}})} . The algorithm also does not guarantee a global maximum. ==== Multiple sequences ==== The algorithm described thus far assumes a single observed sequence Y = y 1 , … , y T {\displaystyle Y=y_{1},\ldots ,y_{T}} . However, in many situations, there are several sequences observed: Y 1 ,

  Read more →
• 

  Core FTP

  Core FTP LE is a freeware secure FTP client for Windows, developed by CoreFTP.com. Features include FTP, SSL/TLS, SFTP via SSH, and HTTP/HTTPS support. Secure FTP clients encrypt account information and data transferred across the internet, protecting data from being seen, or sniffed across networks. Core FTP is a traditional FTP client with local files displayed on the left, remote files on the right. Core FTP Server is a secure FTP server for Windows, developed by CoreFTP.com, starting in 2010. == Licensing == CoreFTP LE is free for personal, educational, non-profit, and business use.

  Read more →
• 

  NFA minimization

  In automata theory (a branch of theoretical computer science), NFA minimization is the task of transforming a given nondeterministic finite automaton (NFA) into an equivalent NFA that has a minimum number of states, transitions, or both. While efficient algorithms exist for DFA minimization, NFA minimization is PSPACE-complete. No efficient (polynomial time) algorithms are known, and under the standard assumption that P ≠ PSPACE, none exist. The most efficient known algorithm is the Kameda–Weiner algorithm. == Non-uniqueness of minimal NFA == Unlike deterministic finite automata, minimal NFAs may not be unique. There may be multiple NFAs with the same number of states that accept the same regular language, but for which there is no equivalent NFA or DFA with fewer states.

  Read more →
• 

  AI Video Generators Reviews: What Actually Works in 2026

  Comparing the best AI video generator? An AI video generator is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI video generator slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

  Read more →