AI Avatar Of Deceased

AI Avatar Of Deceased — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  NASA AI Assisted-Air Quality Monitoring Project

  The NASA Expert-System Ion Trap Mass Spectrometer (ES-ITMS) Project was a public-private partnership to develop an artificial intelligence assisted, air quality monitoring system and was qualified for use on the Space Shuttle. The partnership was also the first cost and intellectual property shared public-partnership implemented by NASA, which used the commercial Research and Development Limited Partnership (RDLP) model that had been adopted by the Reagan Administration for Department of Defense semiconductor development, and recommended for use by NASA for space commercialization. The project partners included NASA, the University of Florida and Finnigan MAT Corporation, was organized and administered by the NASA Joint Enterprise Institute (subsequently NASA Joint Sponsored Program) and ran from 1988 through 1990. The partnership concluded final testing in 1991, generating four patents, expert system software and application protocol reports. The system was space qualified for use on the Shuttle and elements of the ES-ITMS system were integrated into the product Improvements for Finnigan MAT corporation. The success of the partnership lead NASA to create a pilot program to develop partnership business models as an ongoing management practice. == Purpose and objectives == The need to monitor air quality in confined spaces represented an increasing challenge for NASA's planned space missions and private sector facility managers facing the increased scrutiny of possible air contaminants. Up to the early 1980's, air quality monitors generally required large spaces and human technicians to interpret readings. This created a need for miniaturized air quality monitors that could generate reliable and accurate analytic results without on-site technician presence. NASA initiated projects to develop..."mobile and/or portable mass spectrometers" that evaluated the "tradeoff between instrumentation capabilities and space, weight and power considerations." NASA selected a "commercial ITMS instrument capable of generating electron ionization, chemical ionization and mass spectrometry data", to develop a linked expert system to accomplish analysis without human intervention. The commercial instrumentation was from Finnigan MAT corporation while the scientific expertise to support expert system development was available at the University of Florida. The project managers at NASA Ames created a single, integrated project using the RDLP model with objectives to: Develop AI/expert system software for instrument control (NASA's role) Expand sensitivity, selectivity and speed of the spectrometer (Univ Florida role) Expand the spectrometer analytic capability and automate the screening (Finnigan role) == Membership == The partnership included seven specialists from five member organizations: Federal Government National Aeronautics and Space Administration (NASA) NASA Ames Research Center (ARC) NASA Kennedy Space Center (KSC) Commercial Finnigan MAT Corporation (Thermo-Fisher Scientific) TGS Technology, Inc. Research Management University of Florida == Organization, management and administration == The technical project was organized into two development teams, one located in at the NASA Ames Research Center covering expert systems and analytic capabilities and one in Florida covering improved sensitivity and testing. The partnership management and administration was provided by a non-profit, partnership support organization: the Joint Enterprise Institute operating through San Francisco State University Foundation (SFSUF) with a NASA employee liaison, Syed Shariq. == Public-private partnership == The partnership structure was as a prototype test of a pilot NASA program to develop public-private partnership business models. The pilot program was known as the NASA Joint Sponsored Research Program (JSRP), which operated as the NASA Joint Enterprise Institute between 1988 and 1991. The partnership was the first public-private, research and development partnership implemented by NASA in response to national policy shifts to increase technology transfer and space commercialization. The partnership structure included a two year technology development and testing plan that cost $610,000, of which NASA funded $310,000, Finnigan $175,000 and the University of Florida $95,000. == Results and commercialization == The project generated patents (4), software (2) and application protocol reports (8). NASA gained use of the patents and jointly development software while Finnigan received commercial utilization rights. The results were commercialized within eighteen months of project completion. == Recognition == NASA recognized the project as a space qualified instrument. Its achievements were reported to the NASA Administrator, directly leading to establishment of the agency-wide Joint Sponsored Research Program.

  Read more →
• 

  Naive Bayes classifier

  In statistics, naive (sometimes simple or idiot's) Bayes classifiers are a family of "probabilistic classifiers" which assume that the features are conditionally independent, given the target class. In other words, a naive Bayes model assumes the information about the class provided by each variable is unrelated to the information from the others, with no information shared between the predictors. The highly unrealistic nature of this assumption, called the naive independence assumption, is what gives the classifier its name. These classifiers are some of the simplest Bayesian network models. Naive Bayes classifiers generally perform worse than more advanced models like logistic regressions, especially at quantifying uncertainty (with naive Bayes models often producing wildly overconfident probabilities). However, they are highly scalable, requiring only one parameter for each feature or predictor in a learning problem. Maximum-likelihood training can be done by evaluating a closed-form expression (simply by counting observations in each group), rather than the expensive iterative approximation algorithms required by most other models. Despite the use of Bayes' theorem in the classifier's decision rule, naive Bayes is not (necessarily) a Bayesian method, and naive Bayes models can be fit to data using either Bayesian or frequentist methods. == Introduction == Naive Bayes is a simple technique for constructing classifiers: models that assign class labels to problem instances, represented as vectors of feature values, where the class labels are drawn from some finite set. There is not a single algorithm for training such classifiers, but a family of algorithms based on a common principle: all naive Bayes classifiers assume that the value of a particular feature is independent of the value of any other feature, given the class variable. For example, a fruit may be considered to be an apple if it is red, round, and about 10 cm in diameter. A naive Bayes classifier considers each of these features to contribute independently to the probability that this fruit is an apple, regardless of any possible correlations between the color, roundness, and diameter features. In many practical applications, parameter estimation for naive Bayes models uses the method of maximum likelihood; in other words, one can work with the naive Bayes model without accepting Bayesian probability or using any Bayesian methods. Despite their naive design and apparently oversimplified assumptions, naive Bayes classifiers have worked quite well in many complex real-world situations. In 2004, an analysis of the Bayesian classification problem showed that there are sound theoretical reasons for the apparently implausible efficacy of naive Bayes classifiers. Still, a comprehensive comparison with other classification algorithms in 2006 showed that Bayes classification is outperformed by other approaches, such as boosted trees or random forests. An advantage of naive Bayes is that it only requires a small amount of training data to estimate the parameters necessary for classification. == Probabilistic model == Abstractly, naive Bayes is a conditional probability model: it assigns probabilities p ( C k ∣ x 1 , … , x n ) {\displaystyle p(C_{k}\mid x_{1},\ldots ,x_{n})} for each of the K possible outcomes or classes C k {\displaystyle C_{k}} given a problem instance to be classified, represented by a vector x = ( x 1 , … , x n ) {\displaystyle \mathbf {x} =(x_{1},\ldots ,x_{n})} encoding some n features (independent variables). The problem with the above formulation is that if the number of features n is large or if a feature can take on a large number of values, then basing such a model on probability tables is infeasible. The model must therefore be reformulated to make it more tractable. Using Bayes' theorem, the conditional probability can be decomposed as: p ( C k ∣ x ) = p ( C k ) p ( x ∣ C k ) p ( x ) {\displaystyle p(C_{k}\mid \mathbf {x} )={\frac {p(C_{k})\ p(\mathbf {x} \mid C_{k})}{p(\mathbf {x} )}}\,} In plain English, using Bayesian probability terminology, the above equation can be written as posterior = prior × likelihood evidence {\displaystyle {\text{posterior}}={\frac {{\text{prior}}\times {\text{likelihood}}}{\text{evidence}}}\,} In practice, there is interest only in the numerator of that fraction, because the denominator does not depend on C {\displaystyle C} and the values of the features x i {\displaystyle x_{i}} are given, so that the denominator is effectively constant. The numerator is equivalent to the joint probability model p ( C k , x 1 , … , x n ) {\displaystyle p(C_{k},x_{1},\ldots ,x_{n})\,} which can be rewritten as follows, using the chain rule for repeated applications of the definition of conditional probability: p ( C k , x 1 , … , x n ) = p ( x 1 , … , x n , C k ) = p ( x 1 ∣ x 2 , … , x n , C k ) p ( x 2 , … , x n , C k ) = p ( x 1 ∣ x 2 , … , x n , C k ) p ( x 2 ∣ x 3 , … , x n , C k ) p ( x 3 , … , x n , C k ) = ⋯ = p ( x 1 ∣ x 2 , … , x n , C k ) p ( x 2 ∣ x 3 , … , x n , C k ) ⋯ p ( x n − 1 ∣ x n , C k ) p ( x n ∣ C k ) p ( C k ) {\displaystyle {\begin{aligned}p(C_{k},x_{1},\ldots ,x_{n})&=p(x_{1},\ldots ,x_{n},C_{k})\\&=p(x_{1}\mid x_{2},\ldots ,x_{n},C_{k})\ p(x_{2},\ldots ,x_{n},C_{k})\\&=p(x_{1}\mid x_{2},\ldots ,x_{n},C_{k})\ p(x_{2}\mid x_{3},\ldots ,x_{n},C_{k})\ p(x_{3},\ldots ,x_{n},C_{k})\\&=\cdots \\&=p(x_{1}\mid x_{2},\ldots ,x_{n},C_{k})\ p(x_{2}\mid x_{3},\ldots ,x_{n},C_{k})\cdots p(x_{n-1}\mid x_{n},C_{k})\ p(x_{n}\mid C_{k})\ p(C_{k})\\\end{aligned}}} Now the "naive" conditional independence assumptions come into play: assume that all features in x {\displaystyle \mathbf {x} } are mutually independent, conditional on the category C k {\displaystyle C_{k}} . Under this assumption, p ( x i ∣ x i + 1 , … , x n , C k ) = p ( x i ∣ C k ) . {\displaystyle p(x_{i}\mid x_{i+1},\ldots ,x_{n},C_{k})=p(x_{i}\mid C_{k})\,.} Thus, the joint model can be expressed as p ( C k ∣ x 1 , … , x n ) ∝ p ( C k , x 1 , … , x n ) = p ( C k ) p ( x 1 ∣ C k ) p ( x 2 ∣ C k ) p ( x 3 ∣ C k ) ⋯ = p ( C k ) ∏ i = 1 n p ( x i ∣ C k ) , {\displaystyle {\begin{aligned}p(C_{k}\mid x_{1},\ldots ,x_{n})\varpropto \ &p(C_{k},x_{1},\ldots ,x_{n})\\&=p(C_{k})\ p(x_{1}\mid C_{k})\ p(x_{2}\mid C_{k})\ p(x_{3}\mid C_{k})\ \cdots \\&=p(C_{k})\prod _{i=1}^{n}p(x_{i}\mid C_{k})\,,\end{aligned}}} where ∝ {\displaystyle \varpropto } denotes proportionality since the denominator p ( x ) {\displaystyle p(\mathbf {x} )} is omitted. This means that under the above independence assumptions, the conditional distribution over the class variable C {\displaystyle C} is: p ( C k ∣ x 1 , … , x n ) = 1 Z p ( C k ) ∏ i = 1 n p ( x i ∣ C k ) {\displaystyle p(C_{k}\mid x_{1},\ldots ,x_{n})={\frac {1}{Z}}\ p(C_{k})\prod _{i=1}^{n}p(x_{i}\mid C_{k})} where the evidence Z = p ( x ) = ∑ k p ( C k ) p ( x ∣ C k ) {\displaystyle Z=p(\mathbf {x} )=\sum _{k}p(C_{k})\ p(\mathbf {x} \mid C_{k})} is a scaling factor dependent only on x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} , that is, a constant if the values of the feature variables are known. Often, it is only necessary to discriminate between classes. In that case, the scaling factor is irrelevant, and it is sufficient to calculate the log-probability up to a factor: ln ⁡ p ( C k ∣ x 1 , … , x n ) = ln ⁡ p ( C k ) + ∑ i = 1 n ln ⁡ p ( x i ∣ C k ) − ln ⁡ Z ⏟ irrelevant {\displaystyle \ln p(C_{k}\mid x_{1},\ldots ,x_{n})=\ln p(C_{k})+\sum _{i=1}^{n}\ln p(x_{i}\mid C_{k})\underbrace {-\ln Z} _{\text{irrelevant}}} The scaling factor is irrelevant, since discrimination subtracts it away: ln ⁡ p ( C k ∣ x 1 , … , x n ) p ( C l ∣ x 1 , … , x n ) = ( ln ⁡ p ( C k ) + ∑ i = 1 n ln ⁡ p ( x i ∣ C k ) ) − ( ln ⁡ p ( C l ) + ∑ i = 1 n ln ⁡ p ( x i ∣ C l ) ) {\displaystyle \ln {\frac {p(C_{k}\mid x_{1},\ldots ,x_{n})}{p(C_{l}\mid x_{1},\ldots ,x_{n})}}=\left(\ln p(C_{k})+\sum _{i=1}^{n}\ln p(x_{i}\mid C_{k})\right)-\left(\ln p(C_{l})+\sum _{i=1}^{n}\ln p(x_{i}\mid C_{l})\right)} There are two benefits of using log-probability. One is that it allows an interpretation in information theory, where log-probabilities are units of information in nats. Another is that it avoids arithmetic underflow. === Constructing a classifier from the probability model === The discussion so far has derived the independent feature model, that is, the naive Bayes probability model. The naive Bayes classifier combines this model with a decision rule. One common rule is to pick the hypothesis that is most probable so as to minimize the probability of misclassification; this is known as the maximum a posteriori or MAP decision rule. The corresponding classifier, a Bayes classifier, is the function that assigns a class label y ^ = C k {\displaystyle {\hat {y}}=C_{k}} for some k as follows: y ^ = argmax k ∈ { 1 , … , K } p ( C k ) ∏ i = 1 n p ( x i ∣ C k ) . {\displaystyle {\hat {y}}={\underset {k\in \{1,\ldots ,K\}}{\operatorname {argmax} }}\ p(C_{k})\displays

  Read more →
• 

  Neural Networks (journal)

  Neural Networks is a monthly peer-reviewed scientific journal and an official journal of the International Neural Network Society, European Neural Network Society, and Japanese Neural Network Society. == History == The journal was established in 1988 and is published by Elsevier. It covers all aspects of research on artificial neural networks. The founding editor-in-chief was Stephen Grossberg (Boston University). The current editors-in-chief are DeLiang Wang (Ohio State University) and Taro Toyoizumi (RIKEN Center for Brain Science). == Abstracting and indexing == The journal is abstracted and indexed in Scopus and the Science Citation Index Expanded. According to the Journal Citation Reports, the journal has a 2022 impact factor of 7.8.

  Read more →
• 

  U-matrix

  The U-matrix (unified distance matrix) is a representation of a self-organizing map (SOM) where the Euclidean distance between the codebook vectors of neighboring neurons is depicted in a grayscale image. This image is used to visualize the data in a high-dimensional space using a 2D image. == Construction procedure == Once the SOM is trained using the input data, the final map is not expected to have any twists. If the map is twist-free, the distance between the codebook vectors of neighboring neurons gives an approximation of the distance between different parts of the underlying data. When such distances are depicted in a grayscale image, light colors depict closely spaced node codebook vectors and darker colors indicate more widely separated node codebook vectors. Thus, groups of light colors can be considered as clusters, and the dark parts as the boundaries between the clusters. This representation can help to visualize the clusters in the high-dimensional spaces, or to automatically recognize them using relatively simple image processing techniques.

  Read more →
• 

  Cumulus (software)

  Cumulus is a digital asset management software designed for client/server system which is developed by Canto Software. The product makes use of metadata for indexing, organizing, and searching. == History == Cumulus was first released as a Macintosh application in 1992, and was named by Apple Computer as the "Most Innovative Product of 1992". Cumulus introduced search capabilities beyond those available in the Macintosh at the time, particularly relating to thumbnails. Cumulus 1.0 was a single-user product with no network capabilities. Among the main features of Cumulus 1.0, the search function automatically generated previews and contained support for the included AppleTalk – Peer-to-Peer – network. Cumulus 2.5 was available in five different languages and received the 1993 MacUser magazine Eddy award for "Best Publishing & Graphics Utility". In 1995, Canto introduced the scanner software "Cirrus" to focus on the development of Cumulus. Cumulus 3, released in 1996, introduced a server version for the first time and contained the possibility to spread files over the Internet via the "Web Publisher". Since Apple offered Cumulus 3 with its "Workgroup Server" as a bundle, Cumulus became one of the leading digital asset management systems. Cumulus 4 was the first version that was network-ready, and was available for Macintosh, Windows and UNIX operating systems allowing for cross-platform file sharing. Released in 1998, the support of Solaris was discounted later. Cumulus 5 modified the software core to use an open architecture providing an API to external systems and databases. The open architecture of Cumulus 5 also enabled a more functional bridge between Cumulus and the Internet. Cumulus 6 introduced Embedded Java Plugin (EJP) which allowed system integrators to build custom Java plug-ins in order to extend the functionality of the Cumulus client. Cumulus 6.5 marked the end of the Cumulus Single User Edition product, which was licensed to MediaDex for further development and distribution. Cumulus 7 was introduced summer of 2006. Cumulus 8 was released in June 2009, with new indexing capabilities taking advantage of multicore/multiprocessor systems, and ability to manage a wider variety of file formats. Cumulus 8.5 was released in May 2011. Support was added for multilingual metadata, sometimes referred to as "World Metadata." Cumulus Sites was updated to support metadata editing and file uploads. Cumulus 8.6 was released in July 2012, and contains an updated user interface for the administration of Cumulus Sites and additional features for web-based administration of Cumulus. Other additions include features for collaboration links, multi-language support and automated version control. Cumulus 9 was released in September 2013 and introduced a new Web Client User Interface and the Cumulus Video Cloud. The Cumulus Web Client UI was redesigned to provide users with a modern, easy-to-use interface to support and guide the user while addressing modern business needs. The Cumulus Video Cloud extends the Cumulus video handling capabilities to add conversion and global streaming. Cumulus 9 also saw the addition of upload collection links which allow external collaborators to drag and drop files directly into Cumulus without needing a Cumulus account. Cumulus 9.1 was released in May 2014 and introduced the Adobe Drive Adapter for Cumulus which allows users to browse and search digital assets in Cumulus directly from Adobe work environments such as Photoshop, InDesign, Illustrator, Premier and other Adobe applications. Cumulus 10 (Cumulus X) was released July 2015 and introduced two mobile-friendly products: the Cumulus app and Portals. The Cumulus app on iOS was designed to allow users to collaborate either on an iPhone or iPad. Portals is the read-only version of the Cumulus Web Client where users can work with assets that admins allow. Cumulus 10.1 was introduced in January 2016 and included the InDesign Client integration where users can work with Adobe InDesign while accessing their assets from Cumulus. Cumulus 10.2 was introduced in September 2016 and brought the Media Delivery Cloud using Amazon Web Services (AWS). It allows users to manage their media rendition in a single source and distribute media files globally across different channels and devices. Cumulus 10.2.3 was released in February 2017 and came with a "crop and customize photos" feature for Portals and the Web Client. == Product overview == The cataloging of the file via upload into the archive is where Cumulus transfers maximum information about the file from the metadata. For image or photo files, this is typically Exif and IPTC data. The metadata is mainly used to search the archive. The use of embargo data supports license management for copyrighted material. The managed files can be cataloged and their usage can be set. The indexing is based on a predefined taxonomy, which is governed by the internal rules of the organization or by industry standards. You can specify whether files can only be used for specific purposes or only by certain groups of people. The production management system includes version management for files. Via the publication function, the files can be distributed directly via links or e-mails. It's also possible to access from the outside via the Cumulus Portals web interface, which allows a read access to released content from the catalog. There are different variants, starting with the "Workgroup archive server" up to the "Enterprise Business Server" for large companies. Both server and client are extensible through a Java-based plug-in architecture. Since version 7.0, there is a web application based on Ajax with a separate user interface. For access to the Cumulus catalog on mobile, there has been an application for Apple devices based on iOS since 2010. == Miscellaneous == In 2015, Cumulus developer Canto established the first Canto digital asset management (DAM) event. The event is held annually in Berlin. The Henry Stewart team has been hosting DAM conferences since 2006.

  Read more →
• 

  Chromosome (evolutionary algorithm)

  A chromosome or genotype in evolutionary algorithms (EA) is a set of parameters which define a proposed solution of the problem that the evolutionary algorithm is trying to solve. The set of all solutions, also called individuals according to the biological model, is known as the population. The genome of an individual consists of one, more rarely of several, chromosomes and corresponds to the genetic representation of the task to be solved. A chromosome is composed of a set of genes, where a gene consists of one or more semantically connected parameters, which are often also called decision variables. They determine one or more phenotypic characteristics of the individual or at least have an influence on them. In the basic form of genetic algorithms, the chromosome is represented as a binary string, while in later variants and in EAs in general, a wide variety of other data structures are used. == Chromosome design == When creating the genetic representation of a task, it is determined which decision variables and other degrees of freedom of the task should be improved by the EA and possible additional heuristics and how the genotype-phenotype mapping should look like. The design of a chromosome translates these considerations into concrete data structures for which an EA then has to be selected, configured, extended, or, in the worst case, created. Finding a suitable representation of the problem domain for a chromosome is an important consideration, as a good representation will make the search easier by limiting the search space; similarly, a poorer representation will allow a larger search space. In this context, suitable mutation and crossover operators must also be found or newly defined to fit the chosen chromosome design. An important requirement for these operators is that they not only allow all points in the search space to be reached in principle, but also make this as easy as possible. The following requirements must be met by a well-suited chromosome: It must allow the accessibility of all admissible points in the search space. Design of the chromosome in such a way that it covers only the search space and no additional areas. so that there is no redundancy or only as little redundancy as possible. Observance of strong causality: small changes in the chromosome should only lead to small changes in the phenotype. This is also called locality of the relationship between search and problem space. Designing the chromosome in such a way that it excludes prohibited regions in the search space completely or as much as possible. While the first requirement is indispensable, depending on the application and the EA used, one usually only has to be satisfied with fulfilling the remaining requirements as far as possible. The evolutionary search is supported and possibly considerably accelerated by a fulfillment as complete as possible. == Examples of chromosomes == === Chromosomes for binary codings === In their classical form, GAs use bit strings and map the decision variables to be optimized onto them. An example for one Boolean and three integer decision variables with the value ranges 0 ≤ D 1 ≤ 60 {\displaystyle 0\leq D_{1}\leq 60} , 28 ≤ D 2 ≤ 30 {\displaystyle 28\leq D_{2}\leq 30} and − 12 ≤ D 3 ≤ 14 {\displaystyle -12\leq D_{3}\leq 14} may illustrate this: Note that the negative number here is given in two's complement. This straight forward representation uses five bits to represent the three values of D 2 {\displaystyle D_{2}} , although two bits would suffice. This is a significant redundancy. An improved alternative, where 28 is to be added for the genotype-phenotype mapping, could look like this: with D 2 = 28 + D 2 ′ = 29 {\displaystyle D_{2}=28+D'_{2}=29} . === Chromosomes with real-valued or integer genes === For the processing of tasks with real-valued or mixed-integer decision variables, EAs such as the evolution strategy or the real-coded GAs are suited. In the case of mixed-integer values, rounding is often used, but this represents some violation of the redundancy requirement. If the necessary precisions of the real values can be reasonably narrowed down, this violation can be remedied by using integer-coded GAs. For this purpose, the valid digits of real values are mapped to integers by multiplication with a suitable factor. For example, 12.380 becomes the integer 12380 by multiplying by 1000. This must of course be taken into account in genotype-phenotype mapping for evaluation and result presentation. A common form is a chromosome consisting of a list or an array of integer or real values. === Chromosomes for permutations === Combinatorial problems are mainly concerned with finding an optimal sequence of a set of elementary items. As an example, consider the problem of the traveling salesman who wants to visit a given number of cities exactly once on the shortest possible tour. The simplest and most obvious mapping onto a chromosome is to number the cities consecutively, to interpret a resulting sequence as permutation and to store it directly in a chromosome, where one gene corresponds to the ordinal number of a city. Then, however, the variation operators may only change the gene order and not remove or duplicate any genes. The chromosome thus contains the path of a possible tour to the cities. As an example the sequence 3 , 5 , 7 , 1 , 4 , 2 , 9 , 6 , 8 {\displaystyle 3,5,7,1,4,2,9,6,8} of nine cities may serve, to which the following chromosome corresponds: In addition to this encoding frequently called path representation, there are several other ways of representing a permutation, for example the ordinal representation or the matrix representation. === Chromosomes for co-evolution === When a genetic representation contains, in addition to the decision variables, additional information that influences evolution and/or the mapping of the genotype to the phenotype and is itself subject to evolution, this is referred to as co-evolution. A typical example is the evolution strategy (ES), which includes one or more mutation step sizes as strategy parameters in each chromosome. Another example is an additional gene to control a selection heuristic for resource allocation in a scheduling tasks. This approach is based on the assumption that good solutions are based on an appropriate selection of strategy parameters or on control gene(s) that influences genotype-phenotype mapping. The success of the ES gives evidence to this assumption. === Chromosomes for complex representations === The chromosomes presented above are well suited for processing tasks of continuous, mixed-integer, pure-integer or combinatorial optimization. For a combination of these optimization areas, on the other hand, it becomes increasingly difficult to map them to simple strings of values, depending on the task. The following extension of the gene concept is proposed by the EA GLEAM (General Learning Evolutionary Algorithm and Method) for this purpose: A gene is considered to be the description of an element or elementary trait of the phenotype, which may have multiple parameters. For this purpose, gene types are defined that contain as many parameters of the appropriate data type as are required to describe the particular element of the phenotype. A chromosome now consists of genes as data objects of the gene types, whereby, depending on the application, each gene type occurs exactly once as a gene or can be contained in the chromosome any number of times. The latter leads to chromosomes of dynamic length, as they are required for some problems. The gene type definitions also contain information on the permissible value ranges of the gene parameters, which are observed during chromosome generation and by corresponding mutations, so they cannot lead to lethal mutations. For tasks with a combinatorial part, there are suitable genetic operators that can move or reposition genes as a whole, i.e. with their parameters. A scheduling task is used as an illustration, in which workflows are to be scheduled that require different numbers of heterogeneous resources. A workflow specifies which work steps can be processed in parallel and which have to be executed one after the other. In this context, heterogeneous resources mean different processing times at different costs in addition to different processing capabilities. Each scheduling operation therefore requires one or more parameters that determine the resource selection, where the value ranges of the parameters depend on the number of alternative resources available for each work step. A suitable chromosome provides one gene type per work step and in this case one corresponding gene, which has one parameter for each required resource. The order of genes determines the order of scheduling operations and, therefore, the precedence in case of allocation conflicts. The exemplary gene type definition of work step 15 with two resources, for which there are four and seven alternatives respectively

  Read more →
• 

  World Programming System

  The World Programming System, also known as WPS Analytics or WPS, is a software product developed by a company called World Programming (acquired by Altair Engineering). WPS Analytics supports users of mixed ability to access and process data and to perform data science tasks. It has interactive visual programming tools using data workflows, and it has coding tools supporting the use of the SAS language mixed with Python, R and SQL. == About == WPS can use programs written in the language of SAS without the need for translating them into any other language. In this regard WPS is compatible with the SAS system. WPS has a built-in language interpreter able to process the language of SAS and produce similar results. WPS is available to run on z/OS, Windows, macOS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX. On all supported platforms, programs written in the language of SAS can be executed from a WPS command line interface, often referred to as running in batch mode. WPS can also be used from a graphical user interface known as the WPS Workbench for managing, editing and running programs written in the language of SAS. The WPS Workbench user interface is based on Eclipse. WPS version 4 (released in March 2018) introduced a drag-and-drop workflow canvas providing interactive blocks for data retrieval, blending and preparation, data discovery and profiling, predictive modelling powered by machine learning algorithms, model performance validation and scorecards. WPS version 3 (released in February 2012) provided a new client/server architecture that allows the WPS Workbench GUI to execute SAS programs on remote server installations of WPS in a network or cloud. The resulting output, data sets, logs, etc., can then all be viewed and manipulated from inside the Workbench as if the workloads had been executed locally. SAS programs do not require any special language statements to use this feature. == Summary of main features == Runs on Windows, macOS, z/OS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX An integrated development environment based on Eclipse for Linux, macOS and Windows. Support for language of SAS elements. Support for the language of SAS Macros. Matrix Programming support using PROC IML. Support for generating band plots, bar charts, box plots, bubble plots, contour plots, dendrogram plots, ellipse plots, fringe plots, heat maps, high-low plots, histograms, loess plots, needle plots, pie charts, penalised b-spline, radar charts, reference lines, scatter plots, series plots, step plots, regression plots and vector plots. Support for statistical procedures ACECLUS, ASSOCRULES, ANOVA, BIN, BOXPLOT, CANCORR, CANDISC, CLUSTER, CORRESP, DISCRIM, DISTANCE, FACTOR, FASTCLUS, FREQ, GAM, GANNO, GENMOD, GLIMMIX, GLM, GLMMOD, GLMSELECT, ICLIFETEST, KDE, LIFEREG, LIFETEST, LOESS, LOGISTIC, MDS, MEANS, MI, MIANALYSE, MIXED, MODECLUS, NESTED, NLIN, NPAR1WAY, PHREG, PLAN, PLS, POWER, PRINCOMP, PROBIT, QUANTREG, RBF, REG, ROBUSTREG, RSREG, SCORE, SEGMENT, SIMNORMAL, STANDARD, STDSIZE, STDRATE, STEPDISC, SUMMARY, SURVEYMEANS, SURVEYSELECT, TPSPLINE, TRANSREG, TREE, TTEST, UNIVARIATE, VARCLUS, VARCOMP Support for time series procedures ARIMA, AUTOREG, ESM, EXPAND, FORECAST, LOAN, SEVERITY, SPECTRA, TIMESERIES, X12 Support for machine learning procedures DECISIONFOREST, DECISIONTREE, GMM, MLP, OPTIMALBIN, SEGMENT, SVM Support for ODS. Reads and writes SAS datasets (compressed or uncompressed). Access: Actian Matrix (previously known as ParAccel), DASD, DB2, Excel, Greenplum, Hadoop, Informix, Kognitio Archived 2012-08-24 at the Wayback Machine, MariaDB, MySQL, Netezza, ODBC, OLEDB, Oracle, PostgreSQL, SAND, Snowflake, SPSS/PSPP, SQL Server, Sybase, Sybase IQ, Teradata, VSAM, Vertica and XML. Support for SAS Tape Format. Direct output of reports to CSV, PDF and HTML. Support to connect WPS systems programmatically, remote submit parts of a program to execute on connected remote servers, upload and download data between the connected systems. Support for Hadoop Support for R Support for Python == Industry recognition == Gartner recognized World Programming in their Cool Vendors in Data Science, 2014 Report. == Lawsuit == In 2010 World Programming defended its use of the language of SAS in the High Court of England and Wales in SAS Institute Inc. v World Programming Ltd. The software was the subject of a lawsuit by SAS Institute. The EU Court of Justice ruled in favor of World Programming, stating that the copyright protection does not extend to the software functionality, the programming language used and the format of the data files used by the program. It stated that there is no copyright infringement when a company which does not have access to the source code of a program studies, observes and tests that program to create another program with the same functionality.

  Read more →
• 

  Medoid

  Medoids are representative objects of a data set or a cluster within a data set whose sum of dissimilarities to all the objects in the cluster is minimal. Medoids are similar in concept to means or centroids, but medoids are always restricted to be members of the data set. Medoids are most commonly used on data when a mean or centroid cannot be defined, such as graphs. They are also used in contexts where the centroid is not representative of the dataset like in images, 3-D trajectories and gene expression (where while the data is sparse the medoid need not be). These are also of interest while wanting to find a representative using some distance other than squared euclidean distance (for instance in movie-ratings). For some data sets there may be more than one medoid, as with medians. A common application of the medoid is the k-medoids clustering algorithm, which is similar to the k-means algorithm but works when a mean or centroid is not definable. This algorithm basically works as follows. First, a set of medoids is chosen at random. Second, the distances to the other points are computed. Third, data are clustered according to the medoid they are most similar to. Fourth, the medoid set is optimized via an iterative process. Note that a medoid is not equivalent to a median, a geometric median, or centroid. A median is only defined on 1-dimensional data, and it only minimizes dissimilarity to other points for metrics induced by a norm (such as the Manhattan distance or Euclidean distance). A geometric median is defined in any dimension, but unlike a medoid, it is not necessarily a point from within the original dataset. == Definition == Let X := { x 1 , x 2 , … , x n } {\textstyle {\mathcal {X}}:=\{x_{1},x_{2},\dots ,x_{n}\}} be a set of n {\textstyle n} points in a space with a distance function d. Medoid is defined as x medoid = arg ⁡ min y ∈ X ∑ i = 1 n d ( y , x i ) . {\displaystyle x_{\text{medoid}}=\arg \min _{y\in {\mathcal {X}}}\sum _{i=1}^{n}d(y,x_{i}).} == Clustering with medoids == Medoids are a popular replacement for the cluster mean when the distance function is not (squared) Euclidean distance, or not even a metric (as the medoid does not require the triangle inequality). When partitioning the data set into clusters, the medoid of each cluster can be used as a representative of each cluster. Clustering algorithms based on the idea of medoids include: Partitioning Around Medoids (PAM), the standard k-medoids algorithm Hierarchical Clustering Around Medoids (HACAM), which uses medoids in hierarchical clustering == Algorithms to compute the medoid of a set == From the definition above, it is clear that the medoid of a set X {\displaystyle {\mathcal {X}}} can be computed after computing all pairwise distances between points in the ensemble. This would take O ( n 2 ) {\textstyle O(n^{2})} distance evaluations (with n = | X | {\displaystyle n=|{\mathcal {X}}|} ). In the worst case, one can not compute the medoid with fewer distance evaluations. However, there are many approaches that allow us to compute medoids either exactly or approximately in sub-quadratic time under different statistical models. If the points lie on the real line, computing the medoid reduces to computing the median which can be done in O ( n ) {\textstyle O(n)} by Quick-select algorithm of Hoare. However, in higher dimensional real spaces, no linear-time algorithm is known. RAND is an algorithm that estimates the average distance of each point to all the other points by sampling a random subset of other points. It takes a total of O ( n log ⁡ n ϵ 2 ) {\textstyle O\left({\frac {n\log n}{\epsilon ^{2}}}\right)} distance computations to approximate the medoid within a factor of ( 1 + ϵ Δ ) {\textstyle (1+\epsilon \Delta )} with high probability, where Δ {\textstyle \Delta } is the maximum distance between two points in the ensemble. Note that RAND is an approximation algorithm, and moreover Δ {\textstyle \Delta } may not be known apriori. RAND was leveraged by TOPRANK which uses the estimates obtained by RAND to focus on a small subset of candidate points, evaluates the average distance of these points exactly, and picks the minimum of those. TOPRANK needs O ( n 5 3 log 4 3 ⁡ n ) {\textstyle O(n^{\frac {5}{3}}\log ^{\frac {4}{3}}n)} distance computations to find the exact medoid with high probability under a distributional assumption on the average distances. trimed presents an algorithm to find the medoid with O ( n 3 2 2 Θ ( d ) ) {\textstyle O(n^{\frac {3}{2}}2^{\Theta (d)})} distance evaluations under a distributional assumption on the points. The algorithm uses the triangle inequality to cut down the search space. Meddit leverages a connection of the medoid computation with multi-armed bandits and uses an upper-Confidence-bound type of algorithm to get an algorithm which takes O ( n log ⁡ n ) {\textstyle O(n\log n)} distance evaluations under statistical assumptions on the points. Correlated Sequential Halving also leverages multi-armed bandit techniques, improving upon Meddit. By exploiting the correlation structure in the problem, the algorithm is able to provably yield drastic improvement (usually around 1-2 orders of magnitude) in both number of distance computations needed and wall clock time. == Implementations == An implementation of RAND, TOPRANK, and trimed can be found here. An implementation of Meddit can be found here and here. An implementation of Correlated Sequential Halving can be found here. == Medoids in text and natural language processing (NLP) == Medoids can be applied to various text and NLP tasks to improve the efficiency and accuracy of analyses. By clustering text data based on similarity, medoids can help identify representative examples within the dataset, leading to better understanding and interpretation of the data. === Text clustering === Text clustering is the process of grouping similar text or documents together based on their content. Medoid-based clustering algorithms can be employed to partition large amounts of text into clusters, with each cluster represented by a medoid document. This technique helps in organizing, summarizing, and retrieving information from large collections of documents, such as in search engines, social media analytics and recommendation systems. === Text summarization === Text summarization aims to produce a concise and coherent summary of a larger text by extracting the most important and relevant information. Medoid-based clustering can be used to identify the most representative sentences in a document or a group of documents, which can then be combined to create a summary. This approach is especially useful for extractive summarization tasks, where the goal is to generate a summary by selecting the most relevant sentences from the original text. === Sentiment analysis === Sentiment analysis involves determining the sentiment or emotion expressed in a piece of text, such as positive, negative, or neutral. Medoid-based clustering can be applied to group text data based on similar sentiment patterns. By analyzing the medoid of each cluster, researchers can gain insights into the predominant sentiment of the cluster, helping in tasks such as opinion mining, customer feedback analysis, and social media monitoring. === Topic modeling === Topic modeling is a technique used to discover abstract topics that occur in a collection of documents. Medoid-based clustering can be applied to group documents with similar themes or topics. By analyzing the medoids of these clusters, researchers can gain an understanding of the underlying topics in the text corpus, facilitating tasks such as document categorization, trend analysis, and content recommendation. === Techniques for measuring text similarity in medoid-based clustering === When applying medoid-based clustering to text data, it is essential to choose an appropriate similarity measure to compare documents effectively. Each technique has its advantages and limitations, and the choice of the similarity measure should be based on the specific requirements and characteristics of the text data being analyzed. The following are common techniques for measuring text similarity in medoid-based clustering: ==== Cosine similarity ==== Cosine similarity is a widely used measure to compare the similarity between two pieces of text. It calculates the cosine of the angle between two document vectors in a high-dimensional space. Cosine similarity ranges between -1 and 1, where a value closer to 1 indicates higher similarity, and a value closer to -1 indicates lower similarity. By visualizing two lines originating from the origin and extending to the respective points of interest, and then measuring the angle between these lines, one can determine the similarity between the associated points. Cosine similarity is less affected by document length, so it may be better at producing medoids that are representative of the content of a cluster instead of the lengt

  Read more →
• 

  Valantic

  Valantic GmbH (stylised as valantic) is an IT service and consulting company headquartered in Munich, Germany. == History == Valantic GmbH was founded in 2012 under the name Dabero Service Group. Until it was renamed Valantic GmbH in 2017, the company merged with IT service providers and consulting firms. These included, among others, Realtime AG, a company for SAP systems. The companies involved in these mergers were also renamed in 2017 and have since used the Valantic brand name. Realtime AG, for example, became Valantic ERP Services AG. During the COVID-19 pandemic and the resulting economic pressures, demand increased for IT service providers, particularly those offering customised software, IT consulting, SAP services, customer experience, cybersecurity, IoT, and digital work environments. In the following years, Valantic expanded by integrating additional companies. In 2021, Valantic expanded into other European countries through the integration of the Dutch company ISM eCompany and the Portuguese consulting firm Abaco. In 2022, the consulting firm C-Clear/Atom Ideas from Belgium joined Valantic. In February 2019, DPE Deutsche Private Equity Management III GmbH (DPE) took over the majority shareholding in Valantic. The founder, Holger von Daniels, and the further management retained a 25% stake. By 2025, DPE had invested €500 million in Valantic. In the following years, Valantic expanded its international locations. In 2023, Valantic incorporated the Danish company Inspari into the group, thereby entering the Scandinavian market. Inspari is a company for Microsoft technologies such as Azure and Power Platform. In the same year, Valantic joined forces with the Aiopsgroup, an international provider of online shopping applications for private and business customers of large companies. The company is based in Bulgaria with additional locations across Eastern Europe and other places. Additionally, the SAP applications division was expanded through the merger with the Spanish company Saptools. As a result, the companies became one of the largest European end-to-end consulting and implementation house for SAP services. By the end of 2023, Valantic had locations in 18 countries. In November 2024, Valantic announced its merger with the Danish digital consultancy Venzo. Through the integration of the company, founded in 2007 and oriented towards Microsoft technologies and digital transformation projects in the areas of automation, artificial intelligence, security, infrastructure and change management, Valantic further expanded its presence in Denmark and the Nordic countries. In July 2025, Valantic announced its merger with Utiligence GmbH, a Mannheim-based consulting firm for SAP technologies. Utiligence works primarily for the energy industry and supports companies in the integration of SAP S/4HANA and the digitalisation of business processes. == Company structure == Valantic is a partnership-based organisation, with partners acting as decision-makers in matters relating to corporate strategy, employee development and acquisitions. Valantic pursues a holacratic approach, promoting an open and self-organised way of working instead of hierarchical structures. By merging with other companies, Valantic is expanding its range of services and tapping into international markets and market shares. The new companies use Valantic's core systems and support processes, but usually retain their original structure. In the 2024 financial year, the company generated revenue of €544 million and employed 3,874 on average. Valantic has over 40 locations internationally. == Services == Valantic GmbH is a consulting firm, software provider and implementation partner. The company offers services in the areas of digital strategy and analytics (business intelligence and data science), customer experience management, SAP services, smart industries (Industry 4.0, supply chain management, and production planning and control processes), and financial services automation. The automation of financial services is aimed at financial service providers and banks. Valantic has been offering services in the field of generative artificial intelligence (GenAI) since 2023. Part of these services involves enabling companies to use GenAI securely and in compliance with regulations in order to make internal work processes more efficient. Its customers include large corporations, several medium-sized companies and DAX-listed companies. == Research == Since 2018, Valantic has published an annual study on the development of the SAP landscape in German-speaking countries. The study examines topics such as the migration to SAP S/4HANA, cloud strategies, technological trends and the use of artificial intelligence in business processes. The 2025 survey of 201 SAP professionals from the DACH region showed, for example, an increase in ongoing and completed S/4HANA migration projects, as well as a further shift towards private-cloud systems. The use of artificial intelligence continued to grow, as did the use of the SAP Business Technology Platform and the Business Data Cloud. In 2025, Valantic, together with the Handelsblatt Research Institute, published the trend study Digital 2030 – The Rise of Applied AI. The study was based on a survey of around 700 executives from companies in Germany, Austria, and Switzerland on the economic effects of current digitalisation trends. According to the study, most respondents consider artificial intelligence, cybersecurity, and cloud computing to hold the greatest strategic importance for business success by 2030. Around 70% of the participating companies stated that they are already achieving measurable business benefits through the use of AI applications, for example in quality control, document management, logistics, or customer service.

  Read more →
• 

  Jpred

  Jpred v.4 is the latest version of the JPred Protein Secondary Structure Prediction Server which provides predictions by the JNet algorithm, one of the most accurate methods for secondary structure prediction, that has existed since 1998 in different versions. In addition to protein secondary structure, JPred also makes predictions of solvent accessibility and coiled-coil regions. The JPred service runs up to 134 000 jobs per month and has carried out over 2 million predictions in total for users in 179 countries. == JPred 2 == The static HTML pages of JPred 2 are still available for reference. == JPred 3 == The JPred v3 followed on from previous versions of JPred developed and maintained by James Cuff and Jonathan Barber (see JPred References). This release added new functionality and fixed many bugs. The highlights are: New, friendlier user interface Retrained and optimised version of Jnet (v2) - mean secondary structure prediction accuracy of >81% Batch submission of jobs Better error checking of input sequences/alignments Predictions now (optionally) returned via e-mail Users may provide their own query names for each submission JPred now makes a prediction even when there are no PSI-BLAST hits to the query PS/PDF output now incorporates all the predictions == JPred 4 == The current version of JPred (v4) has the following improvements and updates incorporated: Retrained on the latest UniRef90 and SCOPe/ASTRAL version of Jnet (v2.3.1) - mean secondary structure prediction accuracy of >82%. Upgraded the Web Server to the latest technologies (Bootstrap framework, JavaScript) and updating the web pages – improving the design and usability through implementing responsive technologies. Added RESTful API and mass-submission and results retrieval scripts - resulting in peak throughput above 20,000 predictions per day. Added prediction jobs monitoring tools. Upgraded the results reporting – both, on the web-site, and through the optional email summary reports: improved batch submission, added results summary preview through Jalview results visualization summary in SVG and adding full multiple sequence alignments into the reports. Improved help-pages, incorporating tool-tips, and adding one-page step-by-step tutorials. Sequence residues are categorised or assigned to one of the secondary structure elements, such as alpha-helix, beta-sheet and coiled-coil. Jnet uses two neural networks for its prediction. The first network is fed with a window of 17 residues over each amino acid in the alignment plus a conservation number. It uses a hidden layer of nine nodes and has three output nodes, one for each secondary structure element. The second network is fed with a window of 19 residues (the result of first network) plus the conservation number. It has a hidden layer with nine nodes and has three output nodes.

  Read more →
• 

  U-matrix

  The U-matrix (unified distance matrix) is a representation of a self-organizing map (SOM) where the Euclidean distance between the codebook vectors of neighboring neurons is depicted in a grayscale image. This image is used to visualize the data in a high-dimensional space using a 2D image. == Construction procedure == Once the SOM is trained using the input data, the final map is not expected to have any twists. If the map is twist-free, the distance between the codebook vectors of neighboring neurons gives an approximation of the distance between different parts of the underlying data. When such distances are depicted in a grayscale image, light colors depict closely spaced node codebook vectors and darker colors indicate more widely separated node codebook vectors. Thus, groups of light colors can be considered as clusters, and the dark parts as the boundaries between the clusters. This representation can help to visualize the clusters in the high-dimensional spaces, or to automatically recognize them using relatively simple image processing techniques.

  Read more →
• 

  Vapnik–Chervonenkis dimension

  In Vapnik–Chervonenkis theory, the Vapnik–Chervonenkis (VC) dimension is a measure of the size (capacity, complexity, expressive power, richness, or flexibility) of a class of sets. The notion can be extended to classes of binary functions. It is defined as the cardinality of the largest set of points that the function class can shatter—that is, for which all possible binary labelings can be realized by some function in the class. It was originally defined by Vladimir Vapnik and Alexey Chervonenkis. Informally, the capacity of a classification model is related to how complicated it can be. For example, consider the thresholding of a high-degree polynomial: if the polynomial evaluates above zero, that point is classified as positive, otherwise as negative. A high-degree polynomial can be wiggly, so that it can fit a given set of training points well. Such a polynomial has a high capacity. A much simpler alternative is to threshold a linear function. This function may not fit the training set well, because it has a low capacity. This notion of capacity is made rigorous below. == Definitions == === VC dimension of a set-family === Let C = { C } C ∈ C {\displaystyle {\mathcal {C}}=\{C\}_{C\in {\mathcal {C}}}} be a family of sets (also called set family, collection of sets or set of sets) and X {\displaystyle X} a set. Their intersection is defined as the following set family: C ∩ X := { C ∩ X ∣ C ∈ C } . {\displaystyle {\mathcal {C}}\cap X:=\{C\cap X\mid C\in {\mathcal {C}}\}.} Here typically X {\displaystyle X} and each C ∈ C {\displaystyle C\in {\mathcal {C}}} are subsets of a big "universe" of possibilities U {\displaystyle U} where intersection takes place. We say that a set X {\displaystyle X} is shattered by C {\displaystyle {\mathcal {C}}} if P ( X ) = C ∩ X {\displaystyle {\mathcal {P}}(X)={\mathcal {C}}\cap X} i.e. the set of intersections contains (hence is equal to) all the subsets of X {\displaystyle X} . For finite sets X {\displaystyle X} this is equivalent to | C ∩ X | = 2 | X | . {\displaystyle |{\mathcal {C}}\cap X|=2^{|X|}.} The VC dimension D {\displaystyle D} of C {\displaystyle {\mathcal {C}}} is the cardinality of the largest set that is shattered by C {\displaystyle {\mathcal {C}}} . If arbitrarily large sets can be shattered, the VC dimension of C {\displaystyle {\mathcal {C}}} is ∞ {\displaystyle \infty } . === VC dimension of a classification model === A binary classification model f {\displaystyle f} with some parameter vector θ {\displaystyle \theta } is said to shatter a set of generally positioned data points ( x 1 , x 2 , … , x n ) {\displaystyle (x_{1},x_{2},\ldots ,x_{n})} if, for every assignment of labels to those points, there exists a θ {\displaystyle \theta } such that the model f {\displaystyle f} makes no errors when evaluating that set of data points. The VC dimension of a model f {\displaystyle f} is the maximum number of points that can be arranged so that f {\displaystyle f} shatters them. More formally, it is the maximum cardinal D {\displaystyle D} such that there exists a generally positioned data point set of cardinality D {\displaystyle D} that can be shattered by f {\displaystyle f} . == Examples == f {\displaystyle f} is a constant classifier (with no parameters); Its VC dimension is 0 since it cannot shatter even a single point. In general, the VC dimension of a finite classification model, which can return at most 2 d {\displaystyle 2^{d}} different classifiers, is at most d {\displaystyle d} (this is an upper bound on the VC dimension; the Sauer–Shelah lemma gives a lower bound on the dimension). f {\displaystyle f} is a single-parametric threshold classifier on real numbers; i.e., for a certain threshold θ {\displaystyle \theta } , the classifier f θ {\displaystyle f_{\theta }} returns 1 if the input number is larger than θ {\displaystyle \theta } and 0 otherwise. The VC dimension of f {\displaystyle f} is 1 because: (a) It can shatter a single point. For every point x {\displaystyle x} , a classifier f θ {\displaystyle f_{\theta }} labels it as 0 if θ > x {\displaystyle \theta >x} and labels it as 1 if θ < x {\displaystyle \theta x + 2 {\displaystyle \theta >x+2} , as (1,0) if θ ∈ [ x − 4 , x − 2 ) {\displaystyle \theta \in [x-4,x-2)} , as (1,1) if θ ∈ [ x − 2 , x ] {\displaystyle \theta \in [x-2,x]} , and as (0,1) if θ ∈ ( x , x + 2 ] {\displaystyle \theta \in (x,x+2]} . (b) It cannot shatter any set of three points. For every set of three numbers, if the smallest and the largest are labeled 1, then the middle one must also be labeled 1, so not all labelings are possible. f {\displaystyle f} is a straight line as a classification model on points in a two-dimensional plane (this is the model used by a perceptron). The line should separate positive data points from negative data points. There exist sets of 3 points that can indeed be shattered using this model (any 3 points that are not collinear can be shattered). However, no set of 4 points can be shattered: by Radon's theorem, any four points can be partitioned into two subsets with intersecting convex hulls, so it is not possible to separate one of these two subsets from the other. Thus, the VC dimension of this particular classifier is 3. It is important to remember that while one can choose any arrangement of points, the arrangement of those points cannot change when attempting to shatter for some label assignment. Note, only 3 of the 23 = 8 possible label assignments are shown for the three points. f {\displaystyle f} is a single-parametric sine classifier, i.e., for a certain parameter θ {\displaystyle \theta } , the classifier f θ {\displaystyle f_{\theta }} returns 1 if the input number x {\displaystyle x} has sin ⁡ ( θ x ) > 0 {\displaystyle \sin(\theta x)>0} and 0 otherwise. The VC dimension of f {\displaystyle f} is infinite, since it can shatter any finite subset of the set { 2 − m ∣ m ∈ N } {\displaystyle \{2^{-m}\mid m\in \mathbb {N} \}} . == Uses == === In statistical learning theory === The VC dimension can predict a probabilistic upper bound on the test error of a classification model. Vapnik proved that the probability of the test error (i.e., risk with 0–1 loss function) distancing from an upper bound (on data that is drawn i.i.d. from the same distribution as the training set) is given by: Pr ( test error ⩽ training error + 1 N [ D ( log ⁡ ( 2 N D ) + 1 ) − log ⁡ ( η 4 ) ] ) = 1 − η , {\displaystyle \Pr \left({\text{test error}}\leqslant {\text{training error}}+{\sqrt {{\frac {1}{N}}\left[D\left(\log \left({\tfrac {2N}{D}}\right)+1\right)-\log \left({\tfrac {\eta }{4}}\right)\right]}}\,\right)=1-\eta ,} where D {\displaystyle D} is the VC dimension of the classification model, 0 < η ⩽ 1 {\displaystyle 0<\eta \leqslant 1} , and N {\displaystyle N} is the size of the training set (restriction: this formula is valid when D ≪ N {\displaystyle D\ll N} . When D {\displaystyle D} is larger, the test-error may be much higher than the training-error. This is due to overfitting). The VC dimension also appears in sample-complexity bounds. A space of binary functions with VC dimension D {\displaystyle D} can be learned with: N = Θ ( D + ln ⁡ 1 δ ε 2 ) {\displaystyle N=\Theta \left({\frac {D+\ln {1 \over \delta }}{\varepsilon ^{2}}}\right)} samples, where ε {\displaystyle \varepsilon } is the learning error and δ {\displaystyle \delta } is the failure probability. Thus, the sample-complexity is a linear function of the VC dimension of the hypothesis space. === In computational geometry === The VC dimension is one of the critical parameters in the size of ε-nets, which determines the complexity of approximation algorithms based on them; range sets without finite VC dimension may not have finite ε-nets at all. == Bounds == The VC dimension of the dual set-family of C {\displaystyle {\mathcal {C}}} is strictly less than 2 vc ⁡ ( C ) + 1 {\displaystyle 2^{\operatorname {vc} ({\mathcal {C}})+1}} , and this is best possible. The VC dimension of a finite set-family C {\displaystyle {\mathcal {C}}} is at most log 2 ⁡ | C | {\displaystyle \log _{2}|{\mathcal {C}}|} . This is because | C ∩ X | ≤ | X | {\displaystyle |{\mathcal {C}}\cap X|\leq |X|} by definition. Given a set-fa

  Read more →
• 

  Fake nude photography

  Fake nude photography is the creation of nude photographs designed to appear as genuine nudes of an individual. The motivations for the creation of these modified photographs include curiosity, sexual gratification, the stigmatization or embarrassment of the subject, and commercial gain, such as through the sale of the photographs via pornographic websites. Fakes can be created using image editing software or through machine learning. Fake images created using the latter method are called deepfakes. == History == Magazines such as Celebrity Skin published non-fake paparazzi shots and illicitly obtained nude photos, showing there was a market for such images. Subsequently, some websites hosted fake nude or pornographic photos of celebrities, which are sometimes referred to as celebrity fakes. In the 1990s and 2000s, fake nude images of celebrities proliferated on Usenet and on websites, leading to campaigns to take legal action against the creators of the images and websites dedicated to determining the veracity of nude photos. "Deepfakes", which use artificial neural networks to superimpose one person's face into an image or video of someone else, were popularized in the late 2010s, leading to concerns about the technology's use in fake news and revenge porn. Fake nude photography is sometimes confused with Deepfake pornography, but the two are distinct. Fake nude photography typically starts with human-made non-sexual images, and merely makes it appear that the people in them are nude (but not having sex). Deepfake pornography typically starts with human-made sexual (pornographic) images or videos, and alters the actors' facial features to make the participants in the sexual act look like someone else. === DeepNude === In June 2019, a downloadable Windows and Linux application called DeepNude was released which used a Generative Adversarial Network to remove clothing from images of women. The images it produced were typically not pornographic, merely nude. Because there were more images of nude women than men available to its creator, the images it produced were all female, even when the original was male. The app had both a paid and unpaid version. A few days later, on June 27, the creators removed the application and refunded consumers, although various copies of the app, both free and for charge, continue to exist. On GitHub, the open-source version of this program called "open-deepnude" was deleted. The open-source version had the advantage of allowing it to be trained on a larger dataset of nude images to increase the resulting nude image's accuracy level. A successor free software application, Dreamtime, was later released, and some copies of it remain available, though some have been suppressed. === Deepfake Telegram Bot === In July 2019 a deepfake bot service was launched on messaging app Telegram that used AI technology to create nude images of women. The service was free and enabled users to submit photos and receive manipulated nude images within minutes. The service was connected to seven Telegram channels, including the main channel that hosts the bot, technical support, and image sharing channels. While the total number of users was unknown, the main channel had over 45,000 members. As of July 2020, it is estimated that approximately 24,000 manipulated images had been shared across the image sharing channels. === Nudify websites === By late 2024, most ways to produce nude images from photographs of clothed people were accessible at websites rather than in apps, and required payment. == Purposes == The reasons for the creation of nude photos may range from a need to discredit the target publicly, personal hatred for the target, or the promise of pecuniary gains for such work on the part of the creator of such photos. Fake nude photos often target prominent figures such as businesspeople or politicians. == Notable cases == In 2010, 97 people were arrested in Korea after spreading fake nude pictures of the group Girls' Generation on the internet. In 2011, a 53-year-old Incheon man was arrested after spreading more fake pictures of the same group. In 2012, South Korean police identified 157 Korean artists of whom fake nudes were circulating. In 2012, when Liu Yifei's fake nude photography released on the network, Liu Yifei Red Star Land Company declared a legal search to find out who created and released the photos. In the same year, Chinese actor Huang Xiaoming released nude photos that sparked public controversy, but they were ultimately proven to be real pictures. In 2014, supermodel Kate Upton threatened to sue a website for posting her fake nude photos. Previously, in 2011, this page was threatened by Taylor Swift. In November 2014, singer Rain was angry because of a fake nude photo that spread throughout the internet. Information reveals that: "Rain's nude photo was released from Kim Tae-hee's lost phone." Rain's label, Cube Entertainment, stated that the person in the nude photo is not Rain and the company has since stated that it will take strict legal action against those who post photos together with false comments. In July 2018, Seoul police launched an investigation after a fake nude photo of President Moon Jae-in was posted on the website of the Korean radical feminist group WOMAD. In early 2019, Alexandria Ocasio-Cortez, a Democratic politician, was berated by other political parties over a fake nude photo of her in the bathroom. The picture created a huge wave of media controversy in the United States. == Methods == Fake nude images can be created using image editing software or neural network applications. There are two basic methods: Combine and superimpose existing images onto source images, adding the face of the subject onto a nude model. Remove clothes from the source image to make it look like a nude photo. == Impact == Images of this type may have a negative psychological impact on the victims and may be used for extortion purposes.

  Read more →
• 

  Teacher forcing

  Teacher forcing is an algorithm for training the weights of recurrent neural networks (RNNs). It involves feeding observed sequence values (i.e. ground-truth samples) back into the RNN after each step, thus forcing the RNN to stay close to the ground-truth sequence. The term "teacher forcing" can be motivated by comparing the RNN to a human student taking a multi-part exam where the answer to each part (for example a mathematical calculation) depends on the answer to the preceding part. In this analogy, rather than grading every answer in the end, with the risk that the student fails every single part even though they only made a mistake in the first one, a teacher records the score for each individual part and then tells the student the correct answer, to be used in the next part. The use of an external teacher signal is in contrast to real-time recurrent learning (RTRL). Teacher signals are known from oscillator networks. The promise is, that teacher forcing helps to reduce the training time. The term "teacher forcing" was introduced in 1989 by Ronald J. Williams and David Zipser, who reported that the technique was already being "frequently used in dynamical supervised learning tasks" around that time. A NeurIPS 2016 paper introduced the related method of "professor forcing".

  Read more →
• 

  Fitness approximation

  Fitness approximation aims to approximate the objective or fitness functions in evolutionary optimization by building up machine learning models based on data collected from numerical simulations or physical experiments. The machine learning models for fitness approximation are also known as meta-models or surrogates, and evolutionary optimization based on approximated fitness evaluations are also known as surrogate-assisted evolutionary approximation. Fitness approximation in evolutionary optimization can be seen as a sub-area of data-driven evolutionary optimization. == Approximate models in function optimization == === Motivation === In many real-world optimization problems including engineering problems, the number of fitness function evaluations needed to obtain a good solution dominates the optimization cost. In order to obtain efficient optimization algorithms, it is crucial to use prior information gained during the optimization process. Conceptually, a natural approach to utilizing the known prior information is building a model of the fitness function to assist in the selection of candidate solutions for evaluation. A variety of techniques for constructing such a model, often also referred to as surrogates, metamodels or approximation models – for computationally expensive optimization problems have been considered. === Approaches === Common approaches to constructing approximate models based on learning and interpolation from known fitness values of a small population include: Low-degree polynomials and regression models Fourier surrogate modeling Artificial neural networks including Multilayer perceptrons Radial basis function network Support vector machines Due to the limited number of training samples and high dimensionality encountered in engineering design optimization, constructing a globally valid approximate model remains difficult. As a result, evolutionary algorithms using such approximate fitness functions may converge to local optima. Therefore, it can be beneficial to selectively use the original fitness function together with the approximate model.

  Read more →