Teacher forcing is an algorithm for training the weights of recurrent neural networks (RNNs). It involves feeding observed sequence values (i.e. ground-truth samples) back into the RNN after each step, thus forcing the RNN to stay close to the ground-truth sequence. The term "teacher forcing" can be motivated by comparing the RNN to a human student taking a multi-part exam where the answer to each part (for example a mathematical calculation) depends on the answer to the preceding part. In this analogy, rather than grading every answer in the end, with the risk that the student fails every single part even though they only made a mistake in the first one, a teacher records the score for each individual part and then tells the student the correct answer, to be used in the next part. The use of an external teacher signal is in contrast to real-time recurrent learning (RTRL). Teacher signals are known from oscillator networks. The promise is, that teacher forcing helps to reduce the training time. The term "teacher forcing" was introduced in 1989 by Ronald J. Williams and David Zipser, who reported that the technique was already being "frequently used in dynamical supervised learning tasks" around that time. A NeurIPS 2016 paper introduced the related method of "professor forcing".
Automated storage and retrieval system
An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie
Optical sorting
Optical sorting (sometimes called digital sorting) is the automated process of sorting solid products using cameras and/or lasers. Depending on the types of sensors used and the software-driven intelligence of the image processing system, optical sorters can recognize an object's color, size, shape, structural properties and chemical composition. The sorter compares objects to user-defined accept/reject criteria to identify and remove defective products and foreign material (FM) from the production line, or to separate product of different grades or types of materials. Optical sorters are in widespread use in the food industry worldwide, with the highest adoption in processing harvested foods such as potatoes, fruits, vegetables and nuts where it achieves non-destructive, 100 percent inspection in-line at full production volumes. The technology is also used in pharmaceutical manufacturing and nutraceutical manufacturing, tobacco processing, waste recycling and other industries. Compared to manual sorting, which is subjective and inconsistent, optical sorting helps improve product quality, maximize throughput and increase yields while reducing labor costs. == History == Optical sorting is an idea that first came out of the desire to automate industrial sorting of agricultural goods like fruits and vegetables. Before automated optical sorting technology was conceived in the 1930s, companies like Unitec were producing wooden machinery to assist in the mechanical sorting of fruit processing. In 1931, a company known as “the Electric Sorting Company” was incorporated and began the creation of the world’s first color sorters, which were being installed and used in Michigan’s bean industry by 1932. In 1937, optical sorting technology had advanced to allow for systems based on a two-color principle of selection. The next few decades saw the installation of new and improved sorting mechanisms, like gravity feed systems and the implementation of optical sorting in more agricultural industries. In the late 1960s, optical sorting began to be implemented to new industries beyond agriculture, like the sorting of ferrous and non-ferrous metals. By the 1990s, optical sorting was being used heavily in the sorting of solid wastes. With the large technological revolution happening in the late 1990s and early 2000s, optical sorters were being made more efficient via the implementation of new optical sensors, like CCD, UV, and IR cameras. Today, optical sorting is used in a wide variety of industries and, as such, is implemented with a varying selection of mechanisms to assist in that specific sorter’s task. == The sorting system == In general, optical sorters feature four major components: the feed system, the optical system, image processing software, and the separation system. The objective of the feed system is to spread products into a uniform monolayer so products are presented to the optical system evenly, without clumps, at a constant velocity. The optical system includes lights and sensors housed above and/or below the flow of the objects being inspected. The image processing system compares objects to user-defined accept/reject thresholds to classify objects and actuate the separation system. The separation system — usually compressed air for small products and mechanical devices for larger products, like whole potatoes — pinpoints objects while in-air and deflects the objects to remove into a reject chute while the good product continues along its normal trajectory. The ideal sorter to use depends on the application. Therefore, the product's characteristics and the user's objectives determine the ideal sensors, software-driven capabilities and mechanical platform. == Sensors == Optical sorters require a combination of lights and sensors to illuminate and capture images of the objects so the images can be processed. The processed images will determine if the material should be accepted or rejected. There are camera sorters, laser sorters and sorters that feature a combination of the two on one platform. Lights, cameras, lasers and laser sensors can be designed to function within visible light wavelengths as well as the infrared (IR) and ultraviolet (UV) spectrums. The optimal wavelengths for each application maximize the contrast between the objects to be separated. Cameras and laser sensors can differ in spatial resolution, with higher resolutions enabling the sorter to detect and remove smaller defects. === Cameras === Monochromatic cameras detect shades of gray from black to white and can be effective when sorting products with high-contrast defects. Sophisticated color cameras with high color resolution are capable of detecting millions of colors to better distinguish more subtle color defects. Trichromatic color cameras (also called three-channel cameras) divide light into three bands, which can include red, green and/or blue within the visible spectrum as well as IR and UV. The interaction of different materials with parts of the electromagnetic spectrum make these contrasts more evident than how they appear to the naked human eye. Coupled with intelligent software, sorters that feature cameras are capable of recognizing each object's color, size and shape; as well as the color, size, shape and location of a defect on a product. Some intelligent sorters even allow the user to define a defective product based on the total defective surface area of any given object. === Lasers === While cameras capture product information based primarily on material reflectance, lasers and their sensors are able to distinguish a material's structural properties along with their color. This structural property inspection allows lasers to detect a wide range of organic and inorganic foreign material such as insects, glass, metal, sticks, rocks and plastic; even if they are the same color as the good product. Lasers can be designed to operate within specific wavelengths of light; whether on the visible spectrum or beyond. For example, lasers can detect chlorophyll by stimulating fluorescence using specific wavelengths; which is a process that is very effective for removing foreign material from green vegetables. === Camera/laser combinations === Sorters equipped with cameras and lasers on one platform are generally capable of identifying the widest variety of attributes. Cameras are often better at recognizing color, size and shape while laser sensors identify differences in structural properties to maximize foreign material detection and removal. === Hyperspectral Imaging === Driven by the need to solve previously impossible sorting challenges, a new generation of sorters that feature multispectral and hyperspectral imaging Optical Sorters. Like trichromatic cameras, multispectral and hyperspectral cameras collect data from the electromagnetic spectrum. Unlike trichromatic cameras, which divide light into three bands, hyperspectral systems can divide light into hundreds of narrow bands over a continuous range that covers a vast portion of the electromagnetic spectrum. This opens the door for more detailed analysis that leads to a more consistent product. Using IR alone might detect some defects, but combining it with a broader range of the spectrum makes it more effective. Compared to the three data points per pixel collected by trichromatic cameras, hyperspectral cameras can collect hundreds of data points per pixel, which are combined to create a unique spectral signature (also called a fingerprint) for each object. When complemented by capable software intelligence, a hyperspectral sorter processes those fingerprints to enable sorting on the chemical composition of the product. This is an emerging area of chemometrics. == Software-driven intelligence == Once the sensors capture the object's response to the energy source, image processing is used to manipulate the raw data. The image processing extracts and categorizes information about specific features. The user then defines accept/reject thresholds that are used to determine what is good and bad in the raw data flow. The art and science of image processing lies in developing algorithms that maximize the effectiveness of the sorter while presenting a simple user-interface to the operator. Object-based recognition is a classic example of software-driven intelligence. It allows the user to define a defective product based on where a defect lies on the product and/or the total defective surface area of an object. It offers more control in defining a wider range of defective products. When used to control the sorter's ejection system, it can improve the accuracy of ejecting defective products. This improves product quality and increases yields. New software-driven capabilities are constantly being developed to address the specific needs of various applications. As computing hardware becomes more powerful, new software-driven advancements become possible. Some of these advancements enhance the effectivene
Anti-Grain Geometry
Anti-Grain Geometry (AGG) is a 2D rendering graphics library written in C++. It features anti-aliasing and sub-pixel resolution. It is not a graphics library, per se, but rather a framework to build a graphics library upon. The library is operating system independent and renders to an abstract memory object. It comes with examples interfaced to the X Window System, Microsoft Windows, Mac OS X, AmigaOS, BeOS, SDL. The examples also include an SVG viewer. The design of AGG uses C++ templates only at a very high level, rather than extensively, to achieve the flexibility to plug custom classes into the rendering pipeline, without requiring a rigid class hierarchy, and allows the compiler to inline many of the method calls for high performance. For a library of its complexity, it is remarkably lightweight: it has no dependencies above the standard C++ libraries and it avoids the C++ STL in the implementation of the basic algorithms. The implicit interfaces are not well documented, however, and this can make the learning process quite cumbersome. While AGG version 2.5 is licensed under the GNU General Public License, version 2 or greater, AGG version 2.4 is still available under the 3-clause BSD license and is virtually the same as version 2.5. == History == Active development of the AGG codebase stalled in 2006, around the time of the v2.5 release, due to shifting priorities of its main developer and maintainer Maxim Shemanarev. M. Shemanarev remained active in the community until his sudden death in 2013. Development has continued on a fork of the more liberally licensed v2.4 on SourceForge.net. == Usage == The Haiku operating system uses AGG in its windowing system. It is one of the renderers available for use in GNU's Gnash Flash player. Graphical version of Rebol language interpreter is using AGG for scalable vector graphics DRAW dialect. Hilti uses it in some of their rebar detection tools, like the PS 1000. Matplotlib uses AGG as its canonical renderer for interactive user interfaces. fpGUI Toolkit has an optional AggPas back-end rendering engine. Work is being done to make AggPas the default or sole rendering engine for fpGUI. Mapnik, the toolkit that renders the maps on the OpenStreetMap website, uses AGG for all its bitmap map rendering by default. HTTPhotos uses AGG to scale photos. Pdfium, the PDF rendering engine used by Google Chrome makes use of AGG, although work is progressing to replace this with Skia Graphics Engine. Graphics Mill, the .NET imaging SDK uses AGG as its drawing engine. Image-Line FL Studio, a digital audio workstation, since version 10.8 released on September 30, 2012, uses AGG for drawing. Native Instruments's Supercharger and Supercharger GT compressors use AGG for its user interface. == Author == The main author of the library was Maxim Shemanarev (Russian: Максим Шеманарёв). On November 26, 2013 Shemanarev (born June 15, 1966, Nizhny Novgorod, Russia) was reported dead at the age of 47 at his home in Columbia, Maryland (US). He died suddenly, allegedly from an epileptic seizure that he had suffered for a while. He was a graduate from Nizhny Novgorod State Technical University. Little is known about his personal life. It's known though that he was divorced and his mother was alive at the time of his death. He used to love skiing, snowboarding (in Colorado), and inline skating. He was praised by his friends for his intelligent programming skills.
Co–Star
Co–Star is an American astrological social networking service founded in 2017, and headquartered in New York City. Users enter the date, time and place they were born to generate an astrological chart and daily horoscopes, which can be compared with those of other users. == History == The concept for Co-Star began in 2015 when Banu Guler created an astrological chart as a gift. The idea later developed into a mobile application with collaborators Anna Kopp and Ben Weitzman. The app publicly launched in 2017. The app includes astrological readings, charts, and daily push notifications that have been noted for their unconventional tone. In early 2018, the company raised a $750,000 pre-seed round from Female Founders Fund. In 2019, Co–Star raised a $5.2 million seed round from Maveron, Aspect, and 14W. In January 2020, Co–Star for Android was launched to a 120,000-person waitlist—two years after their iOS version. In April 2021, the company announced a $15 million Series A, led by Spark Capital. As of that date, Co–Star reported more than 20 million downloads and increased adoption among young women in the United States. == Features == Co–Star employs artificial intelligence to analyze publicly accessible NASA JPL data and find patterns in a user's transits. Co–Star's algorithm maps human-written snippets of text to planetary movements to display personalized content for each user. That content has been called “slightly robotic,” “wildly beautiful,” “truly insane," “brutally honest,” and compared to “a free therapy session.” In July 2023, Co–Star released an in-app service called The Void that allows users to ask open-ended questions and receive answers informed by Co–Star's astrological database.
Autoscaling
Autoscaling, (also written as auto scaling, auto-scaling, or known as automatic scaling), is a method used in cloud computing that dynamically adjusts the amount of computational resources in a server farm - typically measured by the number of active servers - automatically based on the load on the farm. For example, the number of servers running behind a web application may be increased or decreased automatically based on the number of active users on the site. Since such metrics may change dramatically throughout the course of the day, and servers are a limited resource that cost money to run even while idle, there is often an incentive to run "just enough" servers to support the current load while still being able to support sudden and large spikes in activity. Autoscaling is helpful for such needs, as it can reduce the number of active servers when activity is low, and launch new servers when activity is high. Autoscaling is closely related to, and builds upon, the idea of load balancing. == Advantages == Autoscaling offers the following advantages: For companies running their own web server infrastructure, autoscaling typically means allowing some servers to go to sleep during times of low load, saving on electricity costs (as well as water costs if water is being used to cool the machines). For companies using infrastructure hosted in the cloud, autoscaling can mean lower bills, because most cloud providers charge based on total usage rather than maximum capacity. Even for companies that cannot reduce the total compute capacity they run or pay for at any given time, autoscaling can help by allowing the company to run less time-sensitive workloads on machines that get freed up by autoscaling during times of low traffic. Autoscaling solutions, such as the one offered by Amazon Web Services, can also take care of replacing unhealthy instances and therefore protecting somewhat against hardware, network, and application failures. Autoscaling can offer greater uptime and more availability in cases where production workloads are variable and unpredictable. Autoscaling differs from having a fixed daily, weekly, or yearly cycle of server use in that it is responsive to actual usage patterns, and thus reduces the potential downside of having too few or too many servers for the traffic load. For instance, if traffic is usually lower at midnight, then a static scaling solution might schedule some servers to sleep at night, but this might result in downtime on a night where people happen to use the Internet more (for instance, due to a viral news event). Autoscaling, on the other hand, can handle unexpected traffic spikes better. == Terminology == In the list below, we use the terminology used by Amazon Web Services (AWS). However, alternative names are noted and terminology that is specific to the names of Amazon services is not used for the names. == Practice == === Amazon Web Services (AWS) === Amazon Web Services launched the Amazon Elastic Compute Cloud (EC2) service in August 2006, that allowed developers to programmatically create and terminate instances (machines). At the time of initial launch, AWS did not offer autoscaling, but the ability to programmatically create and terminate instances gave developers the flexibility to write their own code for autoscaling. Third-party autoscaling software for AWS began appearing around April 2008. These included tools by Scalr and RightScale. RightScale was used by Animoto, which was able to handle Facebook traffic by adopting autoscaling. On May 18, 2009, Amazon launched its own autoscaling feature along with Elastic Load Balancing, as part of Amazon Elastic Compute Cloud. Autoscaling is now an integral component of Amazon's EC2 offering. Autoscaling on Amazon Web Services is done through a web browser or the command line tool. In May 2016 Autoscaling was also offered in AWS ECS Service. On-demand video provider Netflix documented their use of autoscaling with Amazon Web Services to meet their highly variable consumer needs. They found that aggressive scaling up and delayed and cautious scaling down served their goals of uptime and responsiveness best. In an article for TechCrunch, Zev Laderman, the co-founder and CEO of Newvem, a service that helps optimize AWS cloud infrastructure, recommended that startups use autoscaling in order to keep their Amazon Web Services costs low. Various best practice guides for AWS use suggest using its autoscaling feature even in cases where the load is not variable. That is because autoscaling offers two other advantages: automatic replacement of any instances that become unhealthy for any reason (such as hardware failure, network failure, or application error), and automatic replacement of spot instances that get interrupted for price or capacity reasons, making it more feasible to use spot instances for production purposes. Netflix's internal best practices require every instance to be in an autoscaling group, and its conformity monkey terminates any instance not in an autoscaling group in order to enforce this best practice. === Microsoft's Windows Azure === On June 27, 2013, Microsoft announced that it was adding autoscaling support to its Windows Azure cloud computing platform. Documentation for the feature is available on the Microsoft Developer Network. === Oracle Cloud === Oracle Cloud Platform allows server instances to automatically scale a cluster in or out by defining an auto-scaling rule. These rules are based on CPU and/or memory utilization and determine when to add or remove nodes. === Google Cloud Platform === On November 17, 2014, the Google Compute Engine announced a public beta of its autoscaling feature for use in Google Cloud Platform applications. As of March 2015, the autoscaling tool is still in Beta. === Facebook === In a blog post in August 2014, a Facebook engineer disclosed that the company had started using autoscaling to bring down its energy costs. The blog post reported a 27% decline in energy use for low traffic hours (around midnight) and a 10-15% decline in energy use over the typical 24-hour cycle. === Kubernetes Horizontal Pod Autoscaler === Kubernetes Horizontal Pod Autoscaler automatically scales the number of pods in a replication controller, deployment or replicaset based on observed CPU utilization (or, with beta support, on some other, application-provided metrics) == Alternative autoscaling decision approaches == Autoscaling by default uses reactive decision approach for dealing with traffic scaling: scaling only happens in response to real-time changes in metrics. In some cases, particularly when the changes occur very quickly, this reactive approach to scaling is insufficient. Two other kinds of autoscaling decision approaches are described below. === Scheduled autoscaling approach === This is an approach to autoscaling where changes are made to the minimum size, maximum size, or desired capacity of the autoscaling group at specific times of day. Scheduled scaling is useful, for instance, if there is a known traffic load increase or decrease at specific times of the day, but the change is too sudden for reactive approach based autoscaling to respond fast enough. AWS autoscaling groups support scheduled scaling. === Predictive autoscaling === This approach to autoscaling uses predictive analytics. The idea is to combine recent usage trends with historical usage data as well as other kinds of data to predict usage in the future, and autoscale based on these predictions. For parts of their infrastructure and specific workloads, Netflix found that Scryer, their predictive analytics engine, gave better results than Amazon's reactive autoscaling approach. In particular, it was better for: Identifying huge spikes in demand in the near future and getting capacity ready a little in advance Dealing with large-scale outages, such as failure of entire availability zones and regions Dealing with variable traffic patterns, providing more flexibility on the rate of scaling out or in based on the typical level and rate of change in demand at various times of day On November 20, 2018, AWS announced that predictive scaling would be available as part of its autoscaling offering.
Procreate (software)
Procreate is a raster graphics editor app for digital painting developed and published by the Australian company Savage Interactive for iOS and iPadOS. It was launched on the App Store in 2011. == Versions == === Procreate === Procreate for iPad was first released in 2011 by the Tasmanian software company Savage Interactive. In June 2013, Savage launched Procreate 2 in conjunction with iOS 7, adding new features such as higher resolution capabilities and more brush options. In 2016, Procreate became one of the top ten best-selling iPad apps on the App Store. In 2018, Procreate became the overall best selling iPad app. With iOS 26, Procreate adapted Liquid Glass into its software. As of March 2026, the most recent version of Procreate for the iPad is 5.4.9. === Procreate Pocket === Procreate Pocket was released to the App Store in December 2014. In 2018, Savage launched Procreate Pocket 2.0 to the App Store. In December 2018, Procreate Pocket received Apple's "App of the Year" award. As of September 2025, the most recent version of Procreate Pocket (for the iPhone) is 4.0.15. === Procreate Dreams === Procreate Dreams, their more recent app focused on 2D animation, was released on the App Store on November 22, 2023. While the application is commended for its intuitive interface and accessibility, some reviewers have noted that it may lack some key animations features, such as reference layers. In June 2024, Procreate Dreams received the 2024 Apple Design Award for Innovation. In December 2025, Savage Interactive released Procreate Dreams 2, a long awaited update and redesign to Procreate Dreams. == Features == The current versions of Procreate use Valkyrie, a proprietary graphics engine to allow customisable brush options and importing brushes from Adobe Photoshop. Procreate offers known features like layers, masks, and blending mode. Its biggest standout compared to other professional drawing software is its simple UI and comparatively easy learning curve. The app also allows for animation. Savage expanded upon Procreate's animation features with a companion app dedicated to 2D animation called Procreate Dreams, released in November 2023. On August 2024, Procreate announced that it would not be incorporating generative artificial intelligence into its software. Savage offers a free internet forum called Procreate Discussions in which users can ask for help, suggest ideas, and share user-generated content on the marketplace or the resources board. == Notable users == Concept artist Doug Chiang creates robot, vehicle, and creature designs for Star Wars in Procreate. Professional artists have also used Procreate to create the posters for Stranger Things, Logan, and Blade Runner 2049, as well as several covers for The New Yorker. It has also been professionally adopted at Marvel Comics, DC Comics, Disney Animation, and Pixar.