AI Avatar Logo

AI Avatar Logo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Blanking (video)

In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.
Read more →
Web-based simulation

Web-based simulation (WBS) is the invocation of computer simulation services over the World Wide Web, specifically through a web browser. Increasingly, the web is being looked upon as an environment for providing modeling and simulation applications, and as such, is an emerging area of investigation within the simulation community. == Application == Web-based simulation is used in several contexts: In e-learning, various principles can quickly be illustrated to students by means of interactive computer animations, for example during lecture demonstrations and computer exercises. In distance learning, web-based simulation may provide an alternative to installing expensive simulation software on the student computer, or an alternative to expensive laboratory equipment. In software engineering, web-based emulation allows application development and testing on one platform for other target platforms, for example for various mobile operating systems or mobile web browsers, without the need of target hardware or locally installed emulation software. In online computer games, 3D environments can be simulated, and old home computers and video game consoles can be emulated, allowing the user to play old computer games in the web browser. In medical education, nurse education and allied health education (like sonographer training), web-based simulations can be used for learning and practicing clinical healthcare procedures. Web-based procedural simulations emphasize the cognitive elements such as the steps of the procedure, the decisions, the tools/devices to be used, and the correct anatomical location. == Client-side vs server-side approaches == Web-based simulation can take place either on the server side or on the client side. In server-side simulation, the numerical calculations and visualization (generation of plots and other computer graphics) is carried out on the web server, while the interactive graphical user interface (GUI) often partly is provided by the client-side, for example using server-side scripting such as PHP or CGI scripts, interactive services based on Ajax or a conventional application software remotely accessed through a VNC Java applet. In client-side simulation, the simulation program is downloaded from the server side but completely executed on the client side, for example using Java applets, Flash animations, JavaScript, or some mathematical software viewer plug-in. Server-side simulation is not scalable for many simultaneous users, but places fewer demands on the user computer performance and web-browser plug-ins than client-side simulation. The term on-line simulation sometimes refers to server-side web-based simulation, sometimes to symbiotic simulation, i.e. a simulation that interacts in real-time with a physical system. The upcoming cloud-computing technologies can be used for new server-side simulation approaches. For instance, there are multi-agent-simulation applications which are deployed on cloud-computing instances and act independently. This allows simulations to be highly scalable. == Existing tools == AgentSheets – graphically programmed tool for creating web-based The Sims-like simulation games, and for teaching beginner students programming. AnyLogic – a graphically programmed tool that generates Java code for discrete-event simulation, system dynamics and agent-based models Easy Java Simulations – a tool for modelling and visualization of physical phenomenons, that automatically generates Java code from mathematical expressions. ExploreLearning Gizmos – a large library of interactive online simulations for math and science education in grades 3–12. FreeFem++ Javascript Version – FreeFem++ is a free and open source PDE solver using the finite element method. GNU Octave web interfaces – MATLAB compatible open-source software Lanner Group Ltd L-SIM Server – Java-based discrete-event simulation engine which supports model standards such as BPMN 2.0 Nanohub – web 2.0 in-browser interactive simulation of nanotechnology NetLogo – a multi-agent programming language and integrated modeling environment that runs on the Java Virtual Machine OpenPlaG – PHP-based function graph plotter for the use on websites OpenEpi – web-based packet of tools for biostatistics Recursive Porous Agent Simulation Toolkit (Repast) – agent-based modeling and simulation toolkit implemented in Java and many other languages SageMath – open-source numerical-analysis software with web interface, based on the Python programming language SimScale – web-based simulation platform supporting computational fluid dynamics, solid mechanics, and thermodynamics StarLogo – agent-based simulation language written in Java. VisSim viewer – graphically programmed data-flow diagrams for simulation of dynamical systems webMathematica and Mathematica Player – a computer algebra system and programming language. VisualSim Architect – VisualSim Explorer enables system-level models to be embedded in documents for viewing, simulation and analysis from within a web browser without any local software installation.
Read more →
Clesh

Clesh (clip load edit share) is a cloud-based video editing platform, created by Forbidden Technologies plc, designed for the consumers, prosumers, and online communities to integrate user-generated content. The core technology is based on FORscene which is geared towards professionals working for example in broadcasting, news media, post production. Video, audio, and graphical content is uploaded to Clesh via a standard web browser, a mobile device such as a phone / tablet, or desktop software for DV capture over FireWire. The hosted material can then be reviewed, searched, edited, and published online by anyone with a standard web browser or compatible mobile device. Clesh supports storyboard shot selection, frame-accurate editing, transitions and various other functions such as; pan, zoom, colour and light correction, and audio levels. Content can be published in formats for example; Podcast, Mpeg2, HTML video or in a proprietary Java format. Cloud-based software provides greater scope for sharing information and collaborating compared to LAN or desktop based systems. Users of cloud-based software rely on the cloud's owner for adequate security, performance and resilience. Clesh does not assert any rights over uploaded content in contrast to other platforms (such as YouTube). All rights to any content uploaded to Clesh remain with the Author. == Features == Some of the services available to Clesh users: Access via Java enabled desktops or Android smartphones or tablets Real-time video rendering including effects and transitions Multiple audio tracks Secured log-on Frame accurate timeline for fine cut editing Logging / meta-data annotation assigns text to portions of video (usable by Clesh and web search engines) Storyboard assembles rough cuts using drag-and-drop Import, host, organise and search for media (DV tape and various video, audio, and still image formats) Publish content to in formats such as podcast, MPEG-2, web (Java Applet), Flash, Ogg, HTML and JPEG Chatrooms to talk to other Clesh users Showreel (a gallery for publishing material visible to internet users) Moderation for approval of material prior to distribution downstream Re-branding and integration support for white-label deployment == Technology == Clesh is based on the same technology as FORscene. An array of servers on the internet backbone provide the cloud computing platform to host Clesh. As a white-label solution Clesh would be branded and hosted per the client requirement. == User interface == End-users access Clesh on clients such as standard Java-enabled Web Browsers and / or Android enabled mobile devices such as tablets and smartphones. == History == Clesh was launched January 2006 and subject to several upgrades during the year to extend functionality including; storyboard, podcasting, moderation, chat and a showreel. During 2007 consumers are offered Clesh via a subscription model. Upgrades include Web Start and graphics upload. Mr Paparazzi selects Clesh as the platform to host its video offering and TrueTube does the same in 2008 by choosing to use Clesh to manage its video portal. Several further upgrades are applied and include; better audio quality, image enhancement controls, transitions, fades, titles, and additional publishing options such as JPEG. In 2010 a version of Clesh is demonstrated on an Android OS tablet device (Samsung Galaxy S Tab), and several upgrades are applied including; HTML publishing, pan, zoom, and overlays.
Read more →
Toggl Track

Toggl Track (formerly Toggl) is a time tracking software developed by Toggl OÜ which is headquartered in Tallinn, Estonia. The company offers online time tracking and reporting services through their website along with mobile and desktop applications. Time can be tracked through a start/stop button, manual entry, or dragging and resizing time blocks in a calendar view. == History == According to Alari Aho, Toggl's CEO and founder, the application has been fully self-funded from the start. The name was created using a random name generator.
Read more →
POP-11

POP-11 is a reflective, incrementally compiled programming language with many of the features of an interpreted language. It is the core language of the Poplog programming environment developed originally by the University of Sussex, and recently in the School of Computer Science at the University of Birmingham, which hosts the main Poplog website. POP-11 is an evolution of the language POP-2, developed in Edinburgh University, and features an open stack model (like Forth, among others). It is mainly procedural, but supports declarative language constructs, including a pattern matcher, and is mostly used for research and teaching in artificial intelligence, although it has features sufficient for many other classes of problems. It is often used to introduce symbolic programming techniques to programmers of more conventional languages like Pascal, who find POP syntax more familiar than that of Lisp. One of POP-11's features is that it supports first-class functions. POP-11 is the core language of the Poplog system. The availability of the compiler and compiler subroutines at run-time (a requirement for incremental compiling) gives it the ability to support a far wider range of extensions (including run-time extensions, such as adding new data-types) than would be possible using only a macro facility. This made it possible for (optional) incremental compilers to be added for Prolog, Common Lisp and Standard ML, which could be added as required to support either mixed language development or development in the second language without using any POP-11 constructs. This made it possible for Poplog to be used by teachers, researchers, and developers who were interested in only one of the languages. The most successful product developed in POP-11 was the Clementine data mining system, developed by ISL. After SPSS bought ISL, they renamed Clementine to SPSS Modeler and decided to port it to C++ and Java, and eventually succeeded with great effort, and perhaps some loss of the flexibility provided by the use of an AI language. POP-11 was for a time available only as part of an expensive commercial package (Poplog), but since about 1999 it has been freely available as part of the open-source software version of Poplog, including various added packages and teaching libraries. An online version of ELIZA using POP-11 is available at Birmingham. At the University of Sussex, David Young used POP-11 in combination with C and Fortran to develop a suite of teaching and interactive development tools for image processing and vision, and has made them available in the Popvision extension to Poplog. == Simple code examples == Here is an example of a simple POP-11 program: define Double(Source) -> Result; Source2 -> Result; enddefine; Double(123) => That prints out: 246 This one includes some list processing: define RemoveElementsMatching(Element, Source) -> Result; lvars Index; [[% for Index in Source do unless Index = Element or Index matches Element then Index; endunless; endfor; %]] -> Result; enddefine; RemoveElementsMatching("the", [[the cat sat on the mat]]) => ;;; outputs [[cat sat on mat]] RemoveElementsMatching("the", [[the cat] [sat on] the mat]) => ;;; outputs [[the cat] [sat on] mat] RemoveElementsMatching([[= cat]], [[the cat]] is a [[big cat]]) => ;;; outputs [[is a]] Examples using the POP-11 pattern matcher, which makes it relatively easy for students to learn to develop sophisticated list-processing programs without having to treat patterns as tree structures accessed by 'head' and 'tail' functions (CAR and CDR in Lisp), can be found in the online introductory tutorial. The matcher is at the heart of the SimAgent (sim_agent) toolkit. Some of the powerful features of the toolkit, such as linking pattern variables to inline code variables, would have been very difficult to implement without the incremental compiler facilities.
Read more →
WorkingPoint

WorkingPoint is a web-based application that provides a suite of small business management tools. It is designed to serve as a single point of access for various business operations, featuring a user-friendly interface. WorkingPoint's functionalities include double-entry bookkeeping, contact management, inventory management, invoicing, and bill and expense management. == Company == WorkingPoint, formerly Netbooks Inc, is a privately held corporation based in San Francisco, CA. The company is backed by CMEA Capital, also based in San Francisco. WorkingPoint has about ten employees and is led by CEO Tate Holt and Chairman Tom Proulx. Proulx is a co-founder of Intuit and an original author of that company’s Quicken personal finance software. The company was founded in 2007 under its original name Netbooks by co-creator Ridgely Evers. Evers set out to design a product that was more user-friendly than Intuit’s Quickbooks, which he also co-created. In mid-2009 the company officially rebranded itself and its flagship product “WorkingPoint”. The purpose of the re-branding was to disassociate the company from the product category of small laptops also known as netbooks. == Social Media Presence == WorkingPoint maintains a daily blog geared toward small business owners and managers. Each week the blog is updated with 3 WorkingPoint product feature or “how-to” posts, 2 subscriber company profiles, and 2 small business coaching posts. The company also maintains a Twitter page and a Facebook page. == Product Description (Free Version) == WorkingPoint allows businesses to invoice up to five customers (repeatedly) and provides account access for up to two individual users free of charge. Online Invoicing WorkingPoint allows users to create customized quotes and invoices online. The invoices can be used to bill customers via email or hardcopy post. WorkingPoint compiles the info from these invoices so users can track customer payments, inventory costs, shipping charges, accounts receivable and sales taxes. Users can also manage customer overpayments, provide customer loyalty discounts, and view a customer invoice history. Bill & Expense Management Users can track their bills and expenses by entering info into the WorkingPoint interface. WorkingPoint compiles this info so users can track categorized expenses, accounts paid, accounts payable, and vendor purchase history. The interface also allows users to add to their inventory while entering billing info. Double-Entry Bookeeping WorkingPoint automatically records entries under the double-entry bookkeeping system (also known as debits and credits) when the user completes invoicing and expense forms. Users can view transactions in general ledger format and perform closing entries if necessary. This functionality is designed for users who do not have an accounting background. Business Contact Management WorkingPoint provides an interface for users to manage their customer and vendor contact info. The software automatically tracks the user’s relationship with contacts, so users can track a contact’s sales and purchase history. Contacts can be imported and exported via numerous email clients including Microsoft Outlook, Yahoo! Mail, Google Gmail, and Mac Address Book. Inventory Management The software automatically adjusts inventory quantities after every purchase and sale. Users can track their current inventory quantity, average cost of inventory on-hand, cost of goods sold (COGS) and top-selling products. Users can also make manual adjustments to inventory when necessary. Financial Reporting Users can view a balance sheet, income statement, or cash flow statement pertaining to their business. The software automatically manages accruals to produce the balance sheet and income statement. Users can choose a data range from which to draw any of these reports. Financial reports can be converted to pdf format or exported (with formulas intact) to OpenOffice or Microsoft Excel. Cash Management WorkingPoint enables users to monitor cash balances on their bank accounts. The software automatically tracks cash inflows and outflows when users manage their accounts payable and accounts receivable. Business Dashboard The Business Dashboard visually and graphically displays key real-time business data. Users can customize the Dashboard to display data of their choosing. Online Company Profile Users can create an online company profile in order to have a presence on the Internet and as a basis for participation in WorkingPoint’s small business community features. Public profiles are featured in the WorkingPoint Company Directory and can be viewed externally using the URL format: https://businessname.workingpoint.com. == Product Description (Premium Version) == The premium version of WorkingPoint costs $10 per month. It includes all of the functionalities of the free version, allowing unlimited invoicing and account access. It also offers the following functions: 1099 Tax Reporting, invoice payment collection via PayPal, Email Marketing via VerticalResponse, and the Premium Reports & Accounting Package. 1099 Tax Reporting Users can identify qualifying companies and individuals for IRS Form 1099 or IRS Form 1096 reporting. WorkingPoint automatically tracks payments made to these companies and individuals. Users can then generate 1099 reports for distribution. Premium Reports & Accounting Package This includes: a Daily Operating Report providing users with sales and cash flow information, customizable accounts categorization, and cash flow statements using the indirect method of reporting. Invoice Payment Collection via PayPal Users can collect payment on their invoices via PayPal. Email Marketing via VerticalResponse The WorkingPoint premium package includes 500 email credits with the email marketing firm VerticalResponse.
Read more →
Nextcloud

Nextcloud is a modular workspace platform designed to provide teams and businesses with a comprehensive environment for digital collaboration. Beyond central data management, it integrates office suites like Collabora Online and EuroOffice office suites. for seamless, cooperative workflows. The platform features built-in tools for chat, videoconferencing, and a privacy-focused AI assistant capable of running entirely on local LLMs. Supported by a rich ecosystem of apps, it can be hosted in the cloud or on premises and can scale up to millions of users. It has been translated into over 100 languages. == Features == Nextcloud files are stored in conventional directory structures, accessible via WebDAV if necessary. A SQLite, MySQL/MariaDB or PostgreSQL database is required to provide additional functionality like permissions, shares, and comments. Nextcloud can synchronize with local clients running Windows (Windows 8.1 and above), macOS (10.14 or later), Linux and FreeBSD. Nextcloud permits user and group administration locally or via different backends like OpenID or LDAP. Content can be shared inside the system by defining granular read/write permissions between users and groups. Nextcloud users can create public URLs when sharing files. Logging of file-related actions, as well as disallowing access based on file access rules is also available. Security options like brute-force protection and multi-factor authentication using TOTP, WebAuthn, Oauth2, and OpenID Connect are available. Nextcloud has planned new features such as monitoring capabilities, full-text search and Kerberos authentication, as well as audio/video conferencing, expanded federation and smaller user interface improvements. == History == In April 2016 Frank Karlitschek and most core contributors left ownCloud Inc. These included some of ownCloud's staff according to sources near to the ownCloud community. Karlitschek and many of these contributors went on to fork ownCloud, creating Nextcloud. The fork was preceded by a blog post of Karlitschek announcing his departure and raising questions about the management of the ownCloud, its community, and priorities between growth, money, and sustainability. There have been no official statements about the reason for the fork. However, Karlitschek mentioned the fork several times in a talk at the 2018 FOSDEM conference and in two appearances on the FLOSS Weekly podcast, emphasizing cultural mismatch between open source developers and business oriented people not used to the open source community. On June 2, within 12 hours of the announcement of the fork, the American entity "ownCloud Inc." announced that it is shutting down with immediate effect, stating that "[...] main lenders in the US have cancelled our credit. Following American law, we are forced to close the doors of ownCloud, Inc. with immediate effect and terminate the contracts of 8 employees." ownCloud Inc. accused Karlitschek of poaching developers, while Nextcloud developers such as Arthur Schiwon stated that he "decided to quit because not everything in the ownCloud Inc. company world evolved as I imagined". ownCloud GmbH continued operations, secured financing from new investors and took over the business of ownCloud Inc. In April 2018 Informationstechnikzentrum Bund (ITZBund) reported Nextcloud won the tender for "Bundescloud" (Germany government cloud) project. In August 2019 it was announced that the governments of France, Sweden and the Netherlands would use Nextcloud for file transfer. In January 2020 Nextcloud 18 "Nextcloud Hub" was released. The major change was direct integration with an Office suite (OnlyOffice) and Nextcloud announced that their goal was to compete with Office 365 and Google Docs. A partnership with Ionos was revealed – its hosting location in Germany and compliance with GDPR should support the goal of data sovereignty. In spring 2020 remote work and web conferencing usage increased due to the COVID-19 pandemic and Nextcloud released version 19 with chat and videoconferencing Talk app integrated into the application core. Communication with an optional "high performance back-end" allows self-hosting of web conferences with more than 10 participants. Collabora Online was introduced as another integrated office suite. In August 2021 Nextcloud was chosen as a collaboration platform for European cloud software GAIA-X. In a September 2021 European Commission report it was mentioned as "the most widely deployed Open Source content collaboration platform" Following the 2025 United States tariffs against the European Union, fear of overreliance on US cloud providers such as Microsoft 365 and Google Workspace increased, with Nextcloud being one of the foremost contenders to replace them. Some governmental organisations including the European Data Protection Supervisor and the German state of Schleswig-Holstein have since switched from Microsoft's Sharepoint to Nextcloud. According to Nextcloud, during the first 5 months of 2025, customer interest in the software had tripled.
Read more →
Identi.ca

identi.ca is a free and open-source social networking and blogging service based on the pump.io software, using the Activity Streams protocol. Identi.ca stopped accepting new registrations in 2013, but continues to operate alongside several other pump.io-based hosts provided by E14N which continue to accept new registrations. == Features == Identi.ca is similar to social networking sites like Facebook and Google+, allowing unlimited length status updates, rich text, and images. The Activity Streams protocol supports many kinds of activities such as games. OpenFarmGame is a prototype application for an Activity Streams-based game. Previous features from its StatusNet version such as hashtags, groups, and global search are not supported. == History == === StatusNet === The service received more than 8,000 registrations and 19,000 updates within the first 24 hours of publicly launching on July 2, 2008, and reached its 1,000,000th notice on November 4, 2008. In January 2009, identi.ca received investment funds from venture capital group Montreal Start Up. On March 30, 2009, Control Yourself (since renamed StatusNet Inc) announced that Identi.ca was to become part of a hosted microblogging service called status.net to be launched in May 2009. Status.net offers individual microblogs under a subdomain to be chosen by the customer. Identi.ca will remain a free service. All notices will be published under the Creative Commons Attribution 3.0 license by default, but paying customers will be free to choose a different license. Formerly based on StatusNet, a micro-blogging software package built on the OStatus specification (and earlier based on the OpenMicroBlogging specification), Identi.ca allowed users to send text updates (known as "notices") up to 140 characters long. While similar to Twitter in both concept and operation, Identi.ca/StatusNet provided many features not currently implemented by Twitter, including XMPP support and personal tag clouds. In addition, Identi.ca/StatusNet allowed free export and exchange of personal and "friend" data based on the FOAF standard; therefore, notices could be fed into a Twitter account or other service, and also ported in to a private system similar to Yammer. === pump.io === Developer Evan Prodromou chose to change the site to the pump.io software platform in development, because pump.io offers more features making it technically more advanced. Registration on Identi.ca was closed in December 2012 in preparation for the switch to pump.io software (the popularity of Identi.ca and "official" Status.net hosting were considered a hindrance to the creation of a federated social network). The conversion was completed on 12 July 2013. The 140 character per post limit was removed (in StatusNet, it was a setting, not an inherent limitation); now the blog posts can contain formatting and images. Groups, hashtags, and a page listing popular posts are not yet implemented in pump.io.
Read more →
Artificial intelligence in fraud detection

Artificial intelligence is used by many different businesses and organizations. It is widely used in the financial sector, especially by accounting firms, to help detect fraud. In 2022, PricewaterhouseCoopers reported that fraud has impacted 46% of all businesses in the world. The shift from working in person to working from home has brought increased access to data. According to an FTC (Federal Trade Commission) study from 2022, customers reported fraud of approximately $5.8 billion in 2021, an increase of 70% from the year before. The majority of these scams were imposter scams and online shopping frauds. Furthermore, artificial intelligence plays a crucial role in developing advanced algorithms and machine learning models that enhance fraud detection systems, enabling businesses to stay ahead of evolving fraudulent tactics in an increasingly digital landscape. == Tools == === Expert systems === Expert systems were first designed in the 1970s as an expansion into artificial intelligence technologies. Their design is based on the premise of decreasing potential user error in decision-making and emulating mental reasoning used by experts in a particular field. They differentiate themselves from traditional linear reasoning models by separating identified points in data and processing them individually at the same time. Though, these systems do not rely purely on machine-learned intelligence. Information regarding rules, practices, and procedures in the form of "if-then" statements are implemented into the programming of the system. Users interact with the system by feeding information into the system either through direct entry or import of external data. An inference system compares the information provided by the user with corresponding rules that are believed to specifically apply to the situation. Using this information and the corresponding rules will be used to create a solution to the user's query. Expert systems will generally not operate properly when the common procedures for a specified situation are ambiguous due to the need for well-defined rules. Implementation of expert systems in accounting procedures is feasible in areas where professional judgment is required. Situations where expert systems are applicable include investigations into transactions that involve potential fraudulent entries, instances of going concern, and the evaluation of risk in the planning stages of an audit. === Continuous auditing === Continuous auditing is a set of processes that assess various aspects of information gathered in an audit to classify areas of risk and potential weaknesses in financial Internal controls at a more frequent rate than traditional methods. Instead of analyzing recorded transactions and journal entries periodically, continuous auditing focuses on interpreting the character of these actions more frequently. The frequency of these processes being undertaken as well as highlighting areas of importance is up to the discretion of their implementer, who commonly makes such decisions based on the level of risk in the accounts being evaluated and the goals of implementing the system. Performance of these processes can occur as frequently as being nearly instantaneous with an entry being posted. The processes involved with analyzing financial data in continuous auditing can include the creation of spreadsheets to allow for interactive information gathering, calculation of financial ratios for comparison with previously created models, and detection of errors in entered figures. A primary goal of this practice is to allow for quicker and easier detection of instances of faulty controls, errors, and instances of fraud. === Machine learning and deep learning === The ability of machine learning and deep learning to swiftly and effectively sort through vast volumes of data in the forms of various documents relevant to companies and documents being audited makes them applicable to the domains of audit and fraud detection. Examples of this include recognizing key language in contracts, identifying levels of risk of fraud in transactions, and assessing journal entries for misstatement. == Applications == === 'Big 4' Accounting Firms === Deloitte created an Al-enabled document-reviewing system in 2014. The system automates the method of reviewing and extracting relevant information from different business documents. Deloitte claims that this innovation has made a difference by reducing time spent going through lawful contract documents, invoices, money-related articulations, and board minutes by up to 50%. Working with IBM's Watson, Deloitte is developing cognitive-technology-enhanced commerce arrangements for its clients. LeasePoint is fueled by IBM TRIRIGA (this product evolved into IBM Maximo Real Estate and Facilities) and uses Deloitte's industrial information to create an end-to-end leasing portfolio. Automated Cognitive Resource Assessment employs IBM's Maximo innovation to progress the proficiency of asset inspection. Ernst and Young (EY) connected Al to the investigation of lease contracts. EY (Australia) has also received Al-enabled auditing technology. Collaborating with H20.ai, PwC developed an Al-enabled framework (GL.ai) capable of analyzing reports and preparing reports. PwC claims to have made a significant investment in normal dialect processing (NLP), an Al-enabled innovation to process unstructured information efficiently. KPMG built a portfolio of Al instruments, called KPMG Ignite, to upgrade trade decisions and forms. Working with Microsoft and IBM Watson, KPMG is creating instruments to coordinate Al, data analytics, Cognitive Technologies, and RPA. == Advantages == === Efficiency === The process of auditing an entity in an attempt to detect fraudulent activity requires the repeating of investigatory processes until an error or misstatement may be identified. Under traditional methods, these processes would be carried out by a human being. Proponents of artificial intelligence in fraud detection have stated that these traditional methods are inefficient and can be more quickly accomplished with the aid of an intelligent computing system. A survey of 400 chief executive officers created by KPMG in 2016 found that approximately 58% believed that artificial intelligence would play a key role in making audits more efficient in the future. === Data interpretation === Higher levels of fraud detection entail the use of professional judgement to interpret data. Supporters of artificial intelligence being used in financial audits have claimed that increased risks from instances of higher data interpretation can be minimized through such technologies. One necessary element of an audit of financial statements that requires professional judgement is the implementation of thresholds for materiality. Materiality entails the distinction between errors and transactions in financial statements that would impact decisions made by users of those financial statements. The threshold for materiality in an audit is set by the auditor based on various factors. Artificial intelligence has been used to interpret data and suggest materiality thresholds to be implemented through the use of expert systems. === Decreased costs === Those in favor of using artificial intelligence to complete investigations of fraud have stated that such technologies decrease the amount of time required to complete tasks that are repetitive. The claim further states that such efficiencies allow for lowered resource requirements, which can then be further spent on tasks that have not been fully automated. The audit firm Ernst & Young has posited these claims by declaring that their deep learning systems have been used to reduce time spent on administrative tasks by analyzing relevant audit documents. According to the firm, this has allowed their employees to focus more on judgement and analysis. == Disadvantages == === Job Displacement === The inescapable reception of computer based intelligence and robotization advancements might prompt critical work relocation across different enterprises. As artificial intelligence frameworks become more equipped for performing undertakings customarily completed by people, there is a worry that specific work jobs could become out of date, prompting joblessness and financial imbalance. === Initial investment requirement === Along with a knowledge of coding and building systems through computer programs, we are seeing the advantages of these systems, but since they are so new, they require a large investment to start building such a system. Any firm that is planning on implementing an AI system to detect fraud must hire a team of data scientists, along with upgrading their cloud system and data storage. The system must be consistently monitored and updated to be the most efficient form of itself, otherwise the likelihood of fraud being involved in those transactions increases. If one does not initially invest in such a syst
Read more →
Deep image compositing

Deep image compositing is a way of compositing and rendering digital images that emerged in the mid-2010s. In addition to the usual color and opacity channels a notion of spatial depth is created. This allows multiple samples in the depth of the image to make up the final resulting color. This technique produces high quality results and removes artifacts around edges that could not be dealt with otherwise. == Deep data == Deep data is encoded by advanced 3D renderers into an image that samples information about the path each rendered pixel takes along the z axis extending outward from the virtual camera through space, including the color and opacity of every non-opaque surface or volume it passes through along the way, as well as neighboring samples. It might be considered somewhat analogous to the way ray tracing generates simulated photon paths through such mediums; however, ray tracing and other traditional rendering techniques generally produce images that contain only three or four channels of color and opacity values per pixel, flattened into a two dimensional frame. Depth maps, on the other hand, contain z axis information encoded in a grayscale image. Each level of gray represents a different slice of the z space. The "thickness" of each slice is determined at time of render, allowing for more or less depth fidelity depending on how deep the scene is. Depth maps have been a boon to compositors for blending 3D renders with live action and practical elements. To be useful, the map must have high enough bit depth to encode separation between close-to-camera objects and objects near infinity. Most 3D software packages are now capable of generating 16-bit and 32-bit depth maps, providing up to 2 billion depth levels. Depth maps do not however include transparency information about non-opaque surfaces or volumes and as such, objects beyond and viewed through these semi- or fully-transparent objects will have no depth information of their own and may not get composited or blurred correctly. Even the popular addition of cryptomattes to many post-production and VFX studios' pipelines, while providing separate color-coded ID shapes for individual elements in a rendered scene to further bridge the gap between CGI and compositing, don't allow for the nearly automated and fully non-linear workflows that deep data does. This is because deep images encapsulate enough 3D information that normally time-intensive tasks such as rotoscoping with numerous holdout mattes for complex interactions between moving characters and semi-transparent environmental volumes like smoke or water, are essentially trivial. Instead of going through that process, multiple mattes could easily be generated from a single set of deep images with no need to re-render every matte element and background for each case. In addition to that efficiency and flexibility, deep data images inherently provide much higher visual quality in common areas that have been difficult with traditional renders, such as the motion-blurred edges of characters with semi-transparent elements like hair. One downside to the use of deep images is their substantial file size, since they encode a relatively enormous amount of data per frame compared to even multichannel formats such as OpenEXR. === Function-based (integrated) === The data is stored as a function of depth. This results in a function curve that can be used to look up the data at any arbitrary depth. Manipulating the data is harder. === Sample-based (deintegrated) === Each sample is considered as an independent piece and can so be manipulated easily. To make sure the data is representing the right detail, an additional expand value needs to be introduced. == Generating deep data == 3D renderers produce the necessary data as a part of the rendering pipeline. Samples are gathered in depth and then combined. The deep data can be written out before this happens and so is nothing new to the process. Generating deep data from camera data needs a proper depth map. This is used in a couple of cases but still not accurate enough for detailed representation. For basic holdout task this can be sufficient though. == Compositing deep data images == Deep images can be composited like regular images. The depth component makes it easier to determine the layering order. Traditionally this had to be input by the user. Deep images have that information for themselves and need no user input. Edge artifacts are reduced as transparent pixels have more data to work with. == History == Deep Images have been around in 3D rendering packages for quite a while now. The use of them for holdouts was first done at several VFX houses in shaders. Holdout mattes can be generated at render time. Using them in a more interactive manner was started recently by several companies, SideFX integrated it in their Houdini software and facilities like Industrial Light & Magic, DreamWorks Animation, Weta, AnimalLogic and DRD studios have implemented interactive solutions. In 2014 the Academy of Motion Picture Arts and Sciences honored the technology with its annual SciTech awards. Dr. Peter Hillman for the long-term development and continued advancement of innovative, robust and complete toolsets for deep compositing and to Colin Doncaster, Johannes Saam, Areito Echevarria, Janne Kontkanen and Chris Cooper for the development, prototyping and promotion of technologies and workflows for deep compositing. == Resources == Pixar Paper Deep Image Paper Video tutorial of Deep Imaging as used on 2012 film Rise of the Planet of the Apes, Nuke compositing software Deep Compositing Course Deep Image File Format at Google Code Academy Award for the Technology Theory of Deep Pixels OpenEXR Deep Pixels
Read more →
CloudSim

CloudSim is a framework for modeling and simulation of cloud computing infrastructures and services. Originally built primarily at the Cloud Computing and Distributed Systems (CLOUDS) Laboratory, the University of Melbourne, Australia, CloudSim has become one of the most popular open source cloud simulators in the research and academia. CloudSim is completely written in Java. The latest version of CloudSim is CloudSim v6.0.0-beta on GitHub. Cloudsim is suitable for implementing simulations scenarios based on Infrastructure as a service as well as with latest version Platform as a service, so get started here == CloudSim extensions == Initially developed as a stand-alone cloud simulator, CloudSim has further been extended by independent researchers. GPUCloudSim is an enhanced CloudSim tool for modeling GPU-based cloud infrastructures and data centers. It offers simulations for multi-GPU setups, customizable GPU policies, GPU remoting, etc. It also examines performance impacts and interactions within virtualized GPU environments. CloudSim Plus is a totally re-engineered CloudSim fork providing general-purpose cloud computing simulation and exclusive features such as: multi-cloud simulations, vertical and horizontal VM scaling, host fault injection and recovery, joint power- and network-aware simulations and more. Though CloudSim itself does not have a graphical user interface, extensions such as CloudReports offer a GUI for CloudSim simulations. CloudSimEx extends CloudSim by adding MapReduce simulation capabilities and parallel simulations. Cloud2Sim extends CloudSim to execute on multiple distributed servers, by leveraging Hazelcast distributed execution framework. RECAP DES extends the CloudSim Plus framework to model synchronous hierarchical architectures (such as ElasticSearch). ThermoSim extends CloudSim toolkit by incorporating thermal characteristics, and uses Deep learning-based temperature predictor for cloud nodes.
Read more →
The Business Cloud

The Business Cloud is an API enabled self-service platform, developed by Domo, that provides an array of services like data connection and data visualization. == History == Domo, Inc. was founded in 2010 by Josh James who also co-founded the web analytics software company Omniture in 1996, which he took public in 2006. Domo launched the Domo Appstore, with 1,000 apps with social and mobile capabilities, in 2016. This appstore creates a network of business apps and an ecosystem of companies into a single, integrated business cloud. This decision came after Domo announced a $131 million round of funding from BlackRock. According to the company, the concept behind The Business Cloud is to connect smaller clouds relating to apps or other functional areas of a business into a single business cloud that allows self-service and other social features to customers. == Services == The Business Cloud is offered as a free service, claimed to be the world's first business cloud with Domo appstore as one of its core services. This free package includes all of the Domo's features and functionality including Domo platform, Domo Apps, visualizations, alerts, company directories, org charts, profiles, tasks and Domo Mobile. The Business Cloud allows customers to leverage their preferred cloud as well as on-premises software and monitor all aspects of their business in routine. The company is supported by a $500 million fund from investors all over the world.
Read more →
Audio-visual speech recognition

Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.
Read more →
Amazon Elastic Compute Cloud

Amazon Elastic Compute Cloud (EC2) is a part of Amazon's cloud-computing platform, Amazon Web Services (AWS), that allows users to rent virtual computers on which to run their own computer applications. EC2 encourages scalable deployment of applications by providing a web service through which a user can boot an Amazon Machine Image (AMI) to configure a virtual machine, which Amazon calls an "instance", containing any software desired. A user can create, launch, and terminate server-instances as needed, paying by the second for active servers – hence the term "elastic". EC2 provides users with control over the geographical location of instances that allows for latency optimization and high levels of redundancy. In November 2010, Amazon switched its own retail website platform to EC2 and AWS. == History == Amazon announced a limited public beta test of EC2 on August 25, 2006, offering access on a first-come, first-served basis. Amazon added two new instance types (Large and Extra-Large) on October 16, 2007. On May 29, 2008, two more types were added, High-CPU Medium and High-CPU Extra Large. There were twelve types of instances available. Amazon added three new features on March 27, 2008: static IP addresses, availability zones, and user-selectable kernels. On August 20, 2008, Amazon added Elastic Block Store (EBS). This provides persistent storage, a feature that had been lacking since the service was introduced. Amazon EC2 went into full production when it dropped the beta label on October 23, 2008. On the same day, Amazon announced the following features: a service level agreement for EC2, Microsoft Windows in beta form on EC2, Microsoft SQL Server in beta form on EC2, plans for an AWS management console, and plans for load balancing, autoscaling, and cloud monitoring services. These features were subsequently added on May 18, 2009. Amazon EC2 was developed mostly by a team in Cape Town, South Africa led by Chris Pinkham. Pinkham provided the initial architecture guidance for EC2 and then built the team and led the development of the project along with Willem van Biljon. == Instance types == Initially, EC2 used Xen virtualization exclusively. However, on November 6, 2017, Amazon announced the new C5 family of instances that were based on a custom architecture around the KVM hypervisor, called Nitro. Each virtual machine, called an "instance", functions as a virtual private server. Amazon sizes instances based on "Elastic Compute Units". The performance of otherwise identical virtual machines may vary. On November 28, 2017, AWS announced a bare-metal instance, a departure from exclusively offering virtualized instance types. As of January 2019, the following instance types were offered: General Purpose: A1, T3, T2, M5, M5a, M4, T3a Compute Optimized: C5, C5n, C4 Memory Optimized: R5, R5a, R4, X1e, X1, High Memory, z1d Accelerated Computing: P3, P2, G3, F1 Storage Optimized: H1, I3, D2 As of April 2018, the following payment methods by instance were offered: On-demand: pay by the hour without commitment. Reserved: rent instances with one-time payment receiving discounts on the hourly charge. Spot: bid-based service: runs the jobs only if the spot price is below the bid specified by bidder. The spot price is claimed to be supply-demand based, however a 2011 study concluded that the price was generally not set to clear the market, but was dominated by an undisclosed reserve price. In 2025, AWS expanded EC2 with the compute-optimized C8gn family, powered by Graviton4 and offering up to 600 Gbit/s network bandwidth (about 30% higher compute performance than C7gn), and introduced G6f fractional-GPU instances that let customers provision one-eighth, one-quarter, or one-half of an NVIDIA L4 GPU for right-sized graphics/ML workloads. === Cost === As of April 2018, Amazon charged about $0.0058 per hour ($4.176 per month) for the smallest "Nano Instance" (t2.nano) virtual machine running Linux or Windows. Storage-optimized instances cost as much as $4.992 per hour (i3.16xlarge). "Reserved" instances can go as low as $2.50 per month for a three-year prepaid plan. The data transfer charge ranges from free to $0.12 per gigabyte, depending on the direction and monthly volume (inbound data transfer is free on all AWS services). EC2 costs can be analyzed using the Amazon Cost and Usage Report. There are many different cost categories for EC2 including: hourly Instance Charges, Data Transfer, EBS Volumes, EBS Volume Snapshots, and Nat Gateway. === Free tier === As of December 2010 Amazon offered a bundle of free resource credits to new account holders. The credits are designed to run a "micro" sized server, storage (EBS), and bandwidth for one year. Unused credits cannot be carried over from one month to the next. === Reserved instances === Reserved instances enable EC2 or RDS service users to reserve an instance for one or three years. The corresponding hourly rate charged by Amazon to operate the instance is 35 to 75% lower than the rate charged for on-demand instances. Reserved instances can be purchased with three different payment options: All Upfront, Partial Upfront and No Upfront. The different purchase options allow for different structuring of payment models, with a larger discount given to customers that pay their reservation upfront. Reserved Instances are purchased based on a resource commitment. These reservations are made based on an instance type and a count of that instance type. For example, you could reserve 100 i3.large instances for a 3-year term. In September 2016, AWS announced several enhancements to Reserved instances, introducing a new feature called scope and a new reservation type called a Convertible. In October 2017, AWS announced the allowance to subdivide the instances purchased for more flexibility. === Spot instances === Cloud providers maintain large amounts of excess capacity they have to sell or risk incurring losses. Amazon EC2 Spot instances are spare compute capacity in the AWS cloud available at up to 90% discount compared to On-Demand prices. As a trade-off, AWS offers no SLA on these instances and customers take the risk that it can be interrupted with only two minutes of notification when Amazon needs the capacity back. Researchers from the Israeli Institute of Technology found that "they (Spot instances) are typically generated at random from within a tight price interval via a dynamic hidden reserve price". Some companies, like Spotinst, are using machine learning to predict spot interruptions up to 15 minutes in advance. === Savings Plans === In November 2019, Amazon announced Savings Plans. Savings Plans are an alternative to Reserved Instances that come in two different plan types: Compute Savings Plans and EC2 Instances Savings Plans. Compute Savings Plans allow an organization to commit to EC2 and Fargate usage with the freedom to change region, family, size, availability zone, OS and tenancy inside the lifespan of the commitment. EC2 Instance Savings plans provide a larger discount than Compute Savings Plans but are less flexible meaning a user must commit to individual instance families within a region to take advantage, but with the freedom to change instances within the family in that region. AWS uses the Cost Explorer to automatically calculate recommendations for the commitments you should make how that commitment will look like as a monthly charge on your AWS bill. AWS Savings Plans are purchased based on hourly spend commitment. This hourly commitment is made using the discounted pricing of the savings plan you are purchasing. For example, you could commit to spending $5 per hour, on a Compute Savings Plan, for a 3-year term. == Features == === Operating systems === When it launched in August 2006, the EC2 service offered Linux and later Sun Microsystems' OpenSolaris and Solaris Express Community Edition. In October 2008, EC2 added the Windows Server 2003 and Windows Server 2008 operating systems to the list of available operating systems. In March 2011, NetBSD AMIs became available. In November 2012, Windows Server 2012 support was added. Since 2006, Colin Percival, a FreeBSD developer and Security Officer, solicited Amazon to add FreeBSD. In November 2012, Amazon officially supported running FreeBSD in EC2. The FreeBSD/EC2 platform is maintained by Percival who also developed the secure deduplicating Amazon S3-cloud based backup service Tarsnap. Amazon has their own Linux distribution based on Fedora and Red Hat Enterprise Linux as a low cost offering known as the Amazon Linux AMI. Version 2013.03 included: Linux kernel, Java OpenJDK Runtime Environment and GNU Compiler Collection. On November 30, 2020, Amazon announced that it would be adding macOS to the EC2 service. Initial support was announced for macOS Mojave and macOS Catalina running on Mac Mini. === Managed Container and Kubernetes Services === Amazon Elastic Container Registry (ECR) is a Docker registry service for Amazon EC2
Read more →
Galaksija BASIC

Galaksija BASIC was the BASIC interpreter of the Galaksija build-it-yourself home computer from Yugoslavia. While being partially based on code taken from TRS-80 Level 1 BASIC, which the creator believed to have been a Microsoft BASIC, the extensive modifications of Galaksija BASIC—such as to include rudimentary array support, video generation code (as the CPU itself did it in absence of dedicated video circuitry) and generally improvements to the programming language—is said to have left not much more than flow-control and floating point code remaining from the original. The core implementation of the interpreter was fully contained in the 4 KiB ROM "A" or "1". The computer's original mainboard had a reserved slot for an extension ROM "B" or "2" that added more commands and features such as a built-in Zilog Z80 assembler. == ROM "A"/"1" symbols and keywords == The core implementation, in ROM "A" or "1", contained 3 special symbols and 32 keywords: ! begins a comment (equivalent of standard BASIC REM command) # Equivalent of standard BASIC DATA statement & prefix for hex numbers ARR$(n) Allocates an array of strings, like DIM, but can allocate only array with name A$ BYTE serves as PEEK when used as a function (e.g. PRINT BYTE(11123)) and POKE when used as a command (e.g. BYTE 11123,123). CALL n Calls BASIC subroutine as GOSUB in most other BASICs (e.g. CALL 100+4X) CHR$(n) converts an ASCII numeric code into a corresponding character (string) DOT x, y draws (command) or inspects (function) a pixel at given coordinates (0<=x<=63, 0<=y<=47). DOT displays the clock or time controlled by content of Y$ variable. Not in standard ROM EDIT n causes specified program line to be edited ELSE standard part of IF-ELSE construct (Galaksija did not use THEN) EQ compare alphanumeric values X$ and Y$ FOR standard FOR loop GOTO standard GOTO command HOME equivalent of standard BASIC CLS command - clears the screen HOME n protects n characters from the top of the screen from being scrolled away IF standard part of IF-ELSE construct (Galaksija did not use THEN) INPUT user entry of variable INT(n) a function that returns the greatest integer value equal to or lesser than n KEY(n) test whether a particular keyboard key is pressed LIST lists the program. Optional numeric argument specifies the first line number to begin listing with. MEM returns memory consumption data (need details here) NEW clears the current BASIC program NEW n clears BASIC program and moves beginning of BASIC area NEXT standard terminator of FOR loop OLD loads a program from tape OLD n loads program to different address PTR Returns address of the variable PRINT Printing numeric or string expression. RETURN Return from BASIC subroutine RND function (takes no arguments) that returns a random number between 0 and 1. RUN runs (executes) BASIC program. Optional numeric argument specifies the line number to begin execution with. SAVE saves a program to tape. Optional two arguments specify memory range to be saved (need details here). STEP standard part of FOR loop STOP stops execution of BASIC program TAKE replacement for READ and RESTORE. If the parameter is variable name, acts as READ, if it is number, acts as RESTORE UNDOT x, y "undraws" (resets) at specified coordinates (see DOT) UNDOT Stops the clock, not part of ROM USR Calls machine code subroutine WORD Double byte PEEK and POKE == ROM "B"/"2" additional symbols and keywords == The extended BASIC features, in ROM "B" or "2", contained one extra reserved symbol and 22 extra keywords: % /LABEL ABS(x) ARCTG(x) COS(x) COSD(x) DEL DUMP EXP(x) INP(x) LDUMP LLIST LN(x) LPRINT OUT PI POW(x,y) REN SIN(x), SIND(x) SQR(x) TG(x) TGD(x)
Read more →