AI Avatar Generator Online Free

AI Avatar Generator Online Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Device-independent pixel

    Device-independent pixel

    A device-independent pixel (also: density-independent pixel, dip, dp) is a unit of length. A typical use is to allow mobile device software to scale the display of information and user interaction to different screen sizes. The abstraction allows an application to work in pixels as a measurement, while the underlying graphics system converts the abstract pixel measurements of the application into real pixel measurements appropriate to the particular device. For example, on the Android operating system a device-independent pixel is equivalent to one physical pixel on a 160 dpi screen, while the Windows Presentation Foundation specifies one device-independent pixel as equivalent to 1/96th of an inch. As dp is a physical unit it has an absolute value which can be measured in traditional units, e.g. for Android devices 1 dp equals 1/160 of inch or 0.15875 mm. While traditional pixels only refer to the display of information, device-independent pixels may also be used to measure user input such as input on a touch screen device.

    Read more →
  • Back-Up Interceptor Control

    Back-Up Interceptor Control

    Backup Interceptor Control (BUIC, ) was the Electronic Systems Division 416M System to backup the SAGE 416L System in the United States and Canada. BUIC deployed Cold War command, control, and coordination systems to SAGE radar stations to create dispersed NORAD Control Centers. == Background == Prior to the SAGE Direction Centers becoming operational, the USAF deployed data link systems at NORAD Control Centers with ground computers for controlling crewed interceptors. After SAGE IBM AN/FSQ-7 Combat Direction Centrals became operational and the Super Combat Centers with improved (digital) computers were cancelled, a backup to SAGE was planned in the event the above-ground SAGE Air Defense Direction Center failed. == General Electric AN/GPA-37 Course Directing Group == BUIC began with deployment of General Electric AN/GPA-37 Course Directing Groups to several Long Range Radar stations. Units designated included the "U.S. Air Force 858th Air Defense Group (BUIC) [which became] a permanent operating facility" at Naval Air Station Fallon in Nevada. == BUIC II == BUIC II was used to command and control sites using the Burroughs AN/GSA-51 Radar Course Directing Group. North Truro AFS became the first ADC installation configured for BUIC II. == BUIC III == The AN/GYK-19 (initially AN/GSA-51A) was an upgraded version of the BUIC II system designated AN/GSA-51A and required a larger building than the AN/GSA-51. The first BUIC III site was Fort Fisher AFS, and Air Defense Command's was first installed at Fort Fisher Air Force Station, North Carolina. Although more advanced systems were contemplated, the final design of the BUIC III system was an upgraded version of the BUIC II with around twice the performance. == Closure and upgrade == In 1972, the USAF decided to shut down most of the BUIC sites; most of the sites mothballed by 1974, except for the BUIC III site at Tyndall Air Force Base. In Canada the BUIC site at Senneterre was shut down, but St Margarets remained open. The remaining sites were closed between 1983-1984 when SAGE was replaced by the Joint Surveillance System. The AN/FYQ-47 Common Digitizer for the Joint Surveillance System, and the Radar Video Data Processor (RVDP) was a combined system for the Air Force and Federal Aviation Administration (FAA), it replaced the SAGE Burroughs AN/FST-2 Coordinate Data Transmitting Sets.

    Read more →
  • G.hn

    G.hn

    Gigabit Home Networking (G.hn) is a specification for wired home networking that supports speeds up to 2 Gbit/s and operates over four types of legacy wires: telephone wiring, coaxial cables, power lines and plastic optical fiber. Some benefits of a multi-wire standard are lower equipment development costs and lower deployment costs for service providers (by allowing customer self-install). == History == G.hn was developed under the International Telecommunication Union's Telecommunication Standardization sector (the ITU-T) and promoted by the HomeGrid Forum and several other organizations. ITU-T Recommendation (the ITU's term for standard) G.9960, which received approval on October 9, 2009, specified the physical layers and the architecture of G.hn. The Data Link Layer (Recommendation G.9961) was approved on June 11, 2010. Prominent organizations, including CEPca, HomePNA, and UPA, who were creators of some of these interfaces, rallied behind the latest version of the standard, emphasizing its potential and significance in the home networking domain. Moreover, the ITU-T extended the technology with multiple input, multiple output (MIMO) technology to increase data rates and signaling distance. This new feature was approved in March 2012 under G.9963 Recommendation. The development and promotion of G.hn have been significantly supported by the HomeGrid Forum and several other organizations. The technology was not only designed to address home-networking challenges but also found applications beyond this initial scope, showcasing its versatility and potential in the networking domain. == Technical specifications == === Technical overview === G.hn specifies a single physical layer based on fast Fourier transform (FFT) orthogonal frequency-division multiplexing (OFDM) modulation and low-density parity-check code (LDPC) forward error correction (FEC) code. G.hn includes the capability to notch specific frequency bands to avoid interference with amateur radio bands and other licensed radio services. G.hn includes mechanisms to avoid interference with legacy home networking technologies and also with other wireline systems such as VDSL2 or other types of DSL used to access the home. OFDM systems split the transmitted signal into multiple orthogonal sub-carriers. In G.hn each one of the sub-carriers is modulated using QAM. The maximum QAM constellation supported by G.hn is 4096-QAM (12-bit QAM). The G.hn media access control is based on a time division multiple access (TDMA) architecture, in which a "domain master" schedules Transmission Opportunities (TXOPs) that can be used by one or more devices in the "domain". There are two types of TXOPs: Contention-Free Transmission Opportunities (CFTXOP), which have a fixed duration and are allocated to a specific pair of transmitter and receiver. CFTXOP are used for implementing TDMA Channel Access for specific applications that require quality of service (QoS) guarantees. Shared Transmission Opportunities (STXOP), which are shared among multiple devices in the network. STXOP are divided into Time Slots (TS). There are two types of TS: Contention-Free Time Slots (CFTS), which are used for implementing "implicit" token passing Channel Access. In G.hn, a series of consecutive CFTS is allocated to a number of devices. The allocation is performed by the "domain master" and broadcast to all nodes in the network. There are pre-defined rules that specify which device can transmit after another device has finished using the channel. As all devices know "who is next", there is no need to explicitly send a "token" between devices. The process of "passing the token" is implicit and ensures that there are no collisions during Channel access. Contention-Based Time Slots (CBTS), which are used for implementing CSMA/CARP Channel Access. In general, CSMA systems cannot completely avoid collisions, so CBTS are only useful for applications that do not have strict Quality of Service requirements. ==== Optimization for each medium ==== Although most elements of G.hn are common for all three media supported by the standard (power lines, phone lines and coaxial cable), G.hn includes media-specific optimizations for each media. Some of these media-specific parameters include: OFDM Carrier Spacing: 195.31 kHz in coaxial, 48.82 kHz in phone lines, 24.41 kHz in power lines. FEC Rates: G.hn's FEC can operate with code rates 1/2, 2/3, 5/6, 16/18 and 20/21. Although these rates are not media specific, it is expected that the higher code rates will be used in cleaner media (such as coaxial) while the lower code rates will be used in noisy environments such as power lines. Automatic repeat request (ARQ) mechanisms: G.hn supports operation both with and without ARQ (re-transmission). Although this is not media specific, it is expected that ARQ-less operation is sometimes appropriate for cleaner media (such as coaxial) while ARQ operation is appropriate for noisy environments such as power lines. Power levels and frequency bands: G.hn defines different power masks for each medium. MIMO support: Recommendation G.9963 includes provisions for transmitting G.hn signals over multiple AC wires (phase, neutral, ground), if they are physically available. In July 2016, G.9963 was updated to include MIMO support over twisted pairs. ==== Security ==== G.hn uses the Advanced Encryption Standard (AES) encryption algorithm (with a 128-bit key length) using the CCMP protocol to ensure confidentiality and message integrity. Authentication and key exchange is done following ITU-T Recommendation X.1035. G.hn specifies point-to-point security inside a domain, which means that each pair of transmitter and receiver uses a unique encryption key which is not shared by other devices in the same domain. For example, if node Alice sends data to node Bob, node Eve (in the same domain as Alice and Bob) will not be able to easily eavesdrop their communication. G.hn supports the concept of relays, in which one device can receive a message from one node and deliver it to another node farther away in the same domain. Relaying becomes critical for applications with complex network topologies that need to cover large distances, such as those found in industrial or utility applications. While a relay can read the source and target addresses, it cannot read the message's content due to its body being end-to-end-encrypted. ==== Profiles ==== The G.hn architecture includes the concept of profiles. Profiles are intended to address G.hn nodes with significantly different levels of complexity. In G.hn the higher complexity profiles are proper supersets of lower complexity profiles, so that devices based on different profiles can interoperate with each other. Examples of G.hn devices based on high complexity profiles are Residential Gateways or Set-Top Boxes. Examples of G.hn devices based on low complexity profiles are home automation, home security and smart grid devices. ==== Technical parameters ==== The chart depicts a summary of the crucial technical specifications of the G.hn standard. Many of these technical elements are consistent across different physical media, with variations seen in areas such as Tone Spacing and frequency ranges. This uniformity is essential as it allows silicon manufacturers to produce a singular chip capable of implementing all three media types, leading to cost savings. Presently, G.hn chipsets are compatible with all three media types. This compatibility allows system manufacturers to create devices that can adjust to any wiring type simply by modifying a software configuration in the equipment. === Spectrum === The G.hn spectrum depends on the medium as shown in the diagram below: === Protocol stack === G.hn specifies the physical layer and the data link layer, according to the OSI model. The G.hn Data Link Layer (Recommendation G.9961) is divided into three sub-layers: The Application Protocol Convergence (APC) Layer, which accepts frames (usually in Ethernet format) from the upper layer (Application Entity) and encapsulates them into G.hn APC protocol data units (APDUs). The maximum payload of each APDU is 214 bytes. The logical link control (LLC), which is responsible for encryption, aggregation, segmentation and automatic repeat-request. This sub-layer is also responsible for "relaying" of APDUs between nodes that may not be able to communicate through a direct connection. The medium access control (MAC), which schedules channel access. The G.hn physical layer (Recommendation G.9960) is divided into three sub-layers: The Physical Coding Sub-layer (PCS), responsible for generating PHY headers. The Physical Medium Attachment (PMA), responsible for scrambling and forward error correction coding/decoding. The Physical Medium Dependent (PMD), responsible for bit-loading and OFDM modulation. The interface between the Application Entity and the Data Link Layer is called A-interface. The interface between the Data Link Layer and the ph

    Read more →
  • Social employee

    Social employee

    A social employee is a worker operating within a social business model. Following an organization's social computing guidelines, social employees use social media tools both for internal workflow and collaboration purposes and for external engagement with customers, prospects and stakeholders through a combination of social media marketing, content marketing, social marketing, and social selling. Social employee programs are considered to be as much about culture and engagement as they are about business processes and best practices. In addition to increased leads and sales, social employee best practices are said to improve business outcomes important to social media marketing, such as increased connections and web traffic, improved brand identification and "chatter", and better customer advocacy. == Overview == The term "social employee" was first introduced to describe those exhibiting the emerging characteristics of workers operating under a social business model. The term is often used interchangeably with similar designations like "employee advocate" or "social employee advocate". Crucial to the perceived value of the social employee is the concept of the digital footprint. While organizations are able to generate large bases of followers through social media, research shows that brand marketing and engagement efforts through these networks are not as effective as those of individual employees. In fact, some research indicates that employee experts are more trusted than any other member of an organization. Because of this, social employee programs are designed to train, empower, and support employee engagement efforts in the hopes of authentically engaging larger communities, increasing the frequency of shares, reviews, and other forms of "earned media" and expanding the brand's presence on the web. == The personal or employee brand == A foundational concept of the social employee is the idea of the personal or employee brand. This concept first gained popular attention in a 1997 FastCompany article by business leader Tom Peters titled "The Brand Called You". In the article, Peters argued that the premium placed on branding impacted workers' lives to such an extent that creating and cultivating a distinct personal brand had become a professional necessity. According to Peters, doing so built trust, loyalty, visibility, influence, and employability. With increased adoption of social media tools by both businesses and consumers in the early 21st century, many business leaders became increasingly concerned with social engagement, both internally among employees and externally with customers and other stakeholders. While many in the business community acknowledged the potential social tools had for improved collaboration, productivity, and brand messaging, the concern that employees would misrepresent their brand, disclose proprietary information, or otherwise damage their company's reputation or ability to conduct business persisted. As a result, many began to advocate for employee branding as a solution to this problem. This helped give new meaning to the concept of brand ambassadorship, positioning everyday employees in public, and potentially high-profile, engagement roles. == Characteristics == === Engaged === Because social employee advocacy is dependent on the perceived authenticity of the employee, engagement is highly valued in social organizations. Further, data show the measurable impact of employee engagement on organizational productivity and profitability: Happy employees were found to be 12 percent more productive. In one study, engaged employees were found to be 38 percent more likely to produce at above-average rates. In another, organizations with engaged employees had a 19 percent higher than average shareholder return, while organizations with disengaged employees experienced shareholder return that was 44 percent below average. Engaged companies were found to outperform disengaged companies by up to 202 percent. Companies with strong focus on culture were found to have an average 13.9 percent turnover rate, while those with a low focus experience were found to have a 48.4 percent turnover rate. === Flexible job environment and work–life balance === The number of professionals working mobile or remote has risen considerably since 2010. While estimates vary, one study found that number of organizations with mobile or remote employees is expected to rise from 24 percent in 2012 to 89 percent by 2020. Other research has estimated that by 2020, 105.4 million professionals will work remotely in America, about 72.3 percent of the total workforce. This change has been linked to a rise in social technologies, including biometrics, wearables, near-field communications, and augmented reality. Social employees have also put a greater emphasis on work–life balance, with many believing that advances in technology can directly support efforts in this area. Purported benefits of this shift include a more flexible workforce, reduced business costs, and greater organizational leverage in attracting and retaining top talent. === Buys into the brand's story === In 2009, thought leader Simon Sinek presented a speech called "How Great Leaders Inspire Action" at a TEDxPugetSound event. Sinek's central argument in this speech was, "People don't buy what you do. They buy why you do it." This concept—that the story behind a business or product offering is a more compelling sales tool than the product itself—is frequently cited in social media marketing as a way to build authentic connections with stakeholders. However, others have argued that for employees to share a brand's story authentically, they must be engaged in that story themselves, and as a result, many companies have made storytelling part of their culture programs. === Collaborative === An implicit tenet in social business is that social technologies aren't a barrier to productivity, but rather a path to increased connectivity. The shift in enterprise software systems like IBM Connections to incorporate social communication models, such as mentions, wikis, and newsfeeds, reflects the changing communication dynamics within business. With an increase in diversity and sophistication in collaborative software platforms, social organizations have sought to find new creative ways to utilize these tools and secure employee buy-in around them. Crowdsourcing has also become popular in social businesses. Examples include AT&T's program The Innovation Pipeline (TIP), begun in 2009, which has generated over 28,000 ideas that have led to over 75 projects with funding exceeding $44 million. IBM has also put considerable resources into such processes, producing its social computing guidelines through employee crowdsourcing, as well as its Connections platform through the Technology Adoption Program (TAP), a more formalized crowdsourcing initiative. Another popular form of internal collaboration is the hack day, or hackathon. Organizations such as Netflix, Facebook, and IBM use hack days to pull employees out of their day-to-day work environments and encourage them to collaborate in nontraditional ways in an attempt to drive disruptive innovation. Social employees are often encouraged to seek external collaboration opportunities with customers and prospects. For example, Procter & Gamble introduced the Live Well Collaborative to connect with external stakeholders and develop products and services for the 50+ demographic. === Social listener === A social listener is someone who engages in social listening, or social media monitoring, for professional means. Social employees can use social media monitoring for a variety of reasons, including professional development, industry news and trends, and gauging market sentiment. Some have argued that social listening is one of the most important components of social business, as it enables organizations to collect rich market data, make more informed strategic decisions, and respond to customer needs more authentically. === Customer-centric === Advocates of customer-centricity in social business argue that social media has changed the dynamic from one-way brand messaging to shared interactions between brand and customer. Brand and customer engagement is seen as a means of creating more lasting connections with customers and prospects and empowering them to become brand promoters. Customer-centric interactions are seen to have distinct value to brands, as research shows that prospects are far more likely to trust brand-related messaging from a friend or family member than they are from a brand. As a means of building social employees, some social advocates have also called for a broader definition of customer to include the employees themselves. In the book The Pursuit of Social Business Excellence, authors Vala Afshar and Brad Martin made the following argument: A social business operates with the guiding principle that each employee's responsi

    Read more →
  • North Atlantic Population Project

    North Atlantic Population Project

    The North Atlantic Population Project (NAPP) is a collaboration of historical demographers in Britain, Canada, Denmark, Germany, Iceland, Norway, and Sweden to produce a massive census microdata collection for the North Atlantic Region in the late-nineteenth century. The database includes complete individual-level census enumerations for each country, and provides information on over 110 million people. This large scale allows detailed analysis of small geographic areas and population subgroups. The NAPP database is designed to be compatible with the Integrated Public Use Microdata Series (IPUMS), and is disseminated through the IPUMS data-access system at the Minnesota Population Center, University of Minnesota. Major collaborators on the project include Lisa Dillon, University of Montreal; Chad Gaffield, University of Ottawa; Ólöf Garðarsdóttir, Statistics Iceland; Marianne Jarnes Erikstad, University of Tromsø; Jan Oldervall University of Bergen; Evan Roberts, University of Minnesota; Steven Ruggles, University of Minnesota; Kevin Schürer, UK Data Archive; Gunnar Thorvaldsen, University of Tromsø; and Matthew Woollard, UK Data Archive. The project is also coordinated by the Minnesota Population Center at the University of Minnesota.

    Read more →
  • Instagram egg

    Instagram egg

    The Instagram egg is a photo of an egg posted by the account @world_record_egg on the social media platform Instagram. It became a global phenomenon and an internet meme within days of its publication on 4 January 2019. It is the second most-liked Instagram post and was the most-liked Instagram post from 14 January 2019 until 20 December 2022, when it was overtaken by Lionel Messi's post showing him and his teammates celebrating after Argentina won the 2022 FIFA World Cup. The owner of the account was revealed to be Chris Godfrey, a British advertising creative, who later worked with his two friends Alissa Khan-Whelan and CJ Brown on a Hulu commercial featuring the egg, intended to raise mental health awareness. == Background == The photo was originally taken by Serghei Platanov, who then posted it to Shutterstock on 23 June 2015 with the title "eggs isolated on white background". == History == On 4 January 2019, the @world_record_egg account was created, and posted an image of a bird egg with the caption, "Let's set a world record together and get the most liked post on Instagram. Beating the current world record held by Kylie Jenner (18 million)! We got this." Jenner's previous record, the first photo of her daughter Stormi, had garnered a total of 18.4 million likes. The post quickly reached 18.4 million likes in just under 10 days, becoming the most-liked Instagram post at the time. It then continued to rise over 45 million likes in the next 48 hours, surpassing the "Despacito" music video and taking the world record for the most-liked online post (on any media platform) in history. After the account became verified on 14 January 2019, the post rose in popularity and likes, which snowballed into coverage in various media outlets. By 18 March 2019, the post had accumulated over 53.3 million likes, nearly three times the previous record of 18.4 million. It posted frequent updates for a few days in the form of Instagram Stories. Alongside the like tally, as of January 2023 the post has 3.8 million comments. Several individuals tried to claim that they were the account's creator, the claims being dismissed by "the egg" on Instagram direct messages. On 3 February 2019, the creator of the Instagram egg was revealed by Hulu and The New York Times to be Chris Godfrey, a British advertising creative. Alissa Khan-Whelan, his colleague, was also outed. On 18 January 2019, the account posted a second picture of an egg, almost identical to the first one apart from a small crack at the top left. As of 25 February 2019, the post accumulated 11.8 million likes. On 22 January 2019, the account posted a third picture of an egg, this time having two larger cracks. In less than 25 minutes, the post accumulated 1 million likes, and by 25 February 2019, it had accumulated 9.5 million likes. On 29 January 2019, a fourth picture of an egg was posted to the account which has another large crack on the right hand side, attracting 7.6 million likes by 25 February 2019. On 1 February 2019, a fifth picture of an egg was posted with stitching like that of a football, referencing the upcoming Super Bowl. That post had accumulated 6.5 million likes by 25 February 2019. The account promised that it would reveal what was inside the egg on 3 February, on the subscription video on demand service Hulu. The Hulu Instagram egg reveal was used to promote an animation about a mental health campaign. A caption from the clip read, "Recently I've started to crack, the pressure of social media is getting to me. If you're struggling too, talk to someone." The video was later posted on the @world_record_egg Instagram account, and this post received over 33 million views by May 2019. As of May 2020, it had received over 41 million views. On 16 July 2019, Chris Godfrey (the creator of the account) was listed as one of the top 25 most influential people on the internet. On 20 December 2022, the record for the most-liked Instagram post was surpassed by a post from Argentine footballer Lionel Messi, showing him and his teammates celebrating after winning the 2022 FIFA World Cup with their national team. The world record egg responded to being overtaken in likes by Messi with "Today [Lionel Messi] has taken the crown, for now. But I'm still left with one question… Who is the greatest of all time – Cristiano Ronaldo or Leo Messi?" The account sold to Dubai-based investor Mustafa El Fishawy in April 2024 for an undisclosed seven-figure sum. Reed Smith, who advised Godfrey, Brown, and Khan-Whelan in the transaction, stated they opted to sell it to "focus on new ventures." On 3 June, @world_record_egg posted an egg with the flag of Palestine in support of the country during the Gaza war; the post's caption described it as an "Egg for Peace" and hoped to "set a new world record together and get the most liked post on Instagram for a good cause." == Reception == In response to breaking the world record for the most-liked Instagram post, the account's owner wrote "This is madness. What a time to be alive." Hours later, Jenner posted a video on Instagram of her cracking open an egg and pouring its yolk onto the ground, with the caption: "Take that little egg." Pundits pontificated on the meaning of the egg picture's dominance over social media's "first family". As Vogue observed, tapping a heart pictogram is easy, and eggs are "lovable". More pointedly: [T]he attention economy is a scam based on requiring little to no labor from both producer and consumer despite commanding the most space, and therefore value, in our digital lives... but it very well could be: As a metaphor for the fragility of the influencer ecosystem, the egg has broken the Internet. The significance of the event and its massive republishing are a topic of discussion. A University of Westminster researcher of internet memes compared it to the movement to name a scientific research vessel in the United Kingdom as Boaty McBoatface. The Instagrammer's success is a rare victory for the unpaid viral campaign on social media. "There is a bit of an anti-celebrity revolt here – 'look what we can do with a simple egg'" The researcher suggests that the accomplishment of becoming such a widely heralded unpaid viral post may become increasingly rare, as social networks rely more on paid and business promotion. The post's spread has been characterized as a populist backlash against "consumerism" and is seen by some as a triumph of community over celebrity. However, propelled by their popular success, the creators promised to release 'egg-centric' memorabilia. Hundreds of games based on the Instagram egg have appeared on Apple's App Store. The creators of the Instagram egg also reached a deal to promote Hulu.

    Read more →
  • Memory-hard function

    Memory-hard function

    In cryptography, a memory-hard function (MHF) is a function that costs a significant amount of memory to efficiently evaluate. It differs from a memory-bound function, which incurs cost by slowing down computation through memory latency. MHFs have found use in key stretching and proof of work as their increased memory requirements significantly reduce the computational efficiency advantage of custom hardware over general-purpose hardware compared to non-MHFs. == Introduction == MHFs are designed to consume large amounts of memory on a computer in order to reduce the effectiveness of parallel computing. In order to evaluate the function using less memory, a significant time penalty is incurred. As each MHF computation requires a large amount of memory, the number of function computations that can occur simultaneously is limited by the amount of available memory. This reduces the efficiency of specialised hardware, such as application-specific integrated circuits and graphics processing units, which utilise parallelisation, in computing a MHF for a large number of inputs, such as when brute-forcing password hashes or mining cryptocurrency. == Motivation and examples == Bitcoin's proof-of-work uses repeated evaluation of the SHA-256 function, but modern general-purpose processors, such as off-the-shelf CPUs, are inefficient when computing a fixed function many times over. Specialized hardware, such as application-specific integrated circuits (ASICs) designed for Bitcoin mining, can use 30,000 times less energy per hash than x86 CPUs whilst having much greater hash rates. This led to concerns about the centralization of mining for Bitcoin and other cryptocurrencies. Because of this inequality between miners using ASICs and miners using CPUs or off-the shelf hardware, designers of later proof-of-work systems utilised hash functions for which it was difficult to construct ASICs that could evaluate the hash function significantly faster than a CPU. As memory cost is platform-independent, MHFs have found use in cryptocurrency mining, such as for Litecoin, which uses scrypt as its hash function. They are also useful in password hashing because they significantly increase the cost of trying many possible passwords against a leaked database of hashed passwords without significantly increasing the computation time for legitimate users. == Measuring memory hardness == There are various ways to measure the memory hardness of a function. One commonly seen measure is cumulative memory complexity (CMC). In a parallel model, CMC is the sum of the memory required to compute a function over every time step of the computation. Other viable measures include integrating memory usage against time and measuring memory bandwidth consumption on a memory bus. Functions requiring high memory bandwidth are sometimes referred to as "bandwidth-hard functions". == Variants == MHFs can be categorized into two different groups based on their evaluation patterns: data-dependent memory-hard functions (dMHF) and data-independent memory-hard functions (iMHF). As opposed to iMHFs, the memory access pattern of a dMHF depends on the function input, such as the password provided to a key derivation function. Examples of dMHFs are scrypt and Argon2d, while examples of iMHFs are Argon2i and catena. Many of these MHFs have been designed to be used as password hashing functions because of their memory hardness. A notable problem with dMHFs is that they are prone to side-channel attacks such as cache timing. This has resulted in a preference for using iMHFs when hashing passwords. However, iMHFs have been mathematically proven to have weaker memory hardness properties than dMHFs.

    Read more →
  • Software token

    Software token

    A software token (a.k.a. soft token) is a piece of a two-factor authentication security device that may be used to authorize the use of computer services. Software tokens are stored on a general-purpose electronic device such as a desktop computer, laptop, PDA, or mobile phone and can be duplicated. (Contrast hardware tokens, where the credentials are stored on a dedicated hardware device and therefore cannot be duplicated — absent physical invasion of the device) Because software tokens are something one does not physically possess, they are exposed to unique threats based on duplication of the underlying cryptographic material - for example, computer viruses and software attacks. Both hardware and software tokens are vulnerable to bot-based man-in-the-middle attacks, or to simple phishing attacks in which the one-time password provided by the token is solicited, and then supplied to the genuine website in a timely manner. Software tokens do have benefits: there is no physical token to carry, they do not contain batteries that will run out, and they are cheaper than hardware tokens. == Security architecture == There are two primary architectures for software tokens: shared secret and public-key cryptography. For a shared secret, an administrator will typically generate a configuration file for each end-user. The file will contain a username, a personal identification number, and the secret. This configuration file is given to the user. The shared secret architecture is potentially vulnerable in a number of areas. The configuration file can be compromised if it is stolen and the token is copied. With time-based software tokens, it is possible to borrow an individual's PDA or laptop, set the clock forward, and generate codes that will be valid in the future. Any software token that uses shared secrets and stores the PIN alongside the shared secret in a software client can be stolen and subjected to offline attacks. Shared secret tokens can be difficult to distribute, since each token is essentially a different piece of software. Each user must receive a copy of the secret, which can create time constraints. Some newer software tokens rely on public-key cryptography, or asymmetric cryptography. This architecture eliminates some of the traditional weaknesses of software tokens, but does not affect their primary weakness (ability to duplicate). A PIN can be stored on a remote authentication server instead of with the token client, making a stolen software token no good unless the PIN is known as well. However, in the case of a virus infection, the cryptographic material can be duplicated and then the PIN can be captured (via keylogging or similar) the next time the user authenticates. If there are attempts made to guess the PIN, it can be detected and logged on the authentication server, which can disable the token. Using asymmetric cryptography also simplifies implementation, since the token client can generate its own key pair and exchange public keys with the server.

    Read more →
  • Single particle analysis

    Single particle analysis

    Single particle analysis is a group of related computerized image processing techniques used to analyze images from transmission electron microscopy (TEM). These methods were developed to improve and extend the information obtainable from TEM images of particulate samples, typically proteins or other large biological entities such as viruses. Individual images of stained or unstained particles are very noisy, making interpretation difficult. Combining several digitized images of similar particles together gives an image with stronger and more easily interpretable features. An extension of this technique uses single particle methods to build up a three-dimensional reconstruction of the particle. Using cryo-electron microscopy it has become possible to generate reconstructions with sub-nanometer, near-atomic resolution resolution first in the case of highly symmetric viruses, and now in smaller, asymmetric proteins as well. == Techniques == Single particle analysis can be done on both negatively stained and vitreous ice-embedded transmission electron cryomicroscopy (CryoTEM) samples. Single particle analysis methods are, in general, reliant on the sample being homogeneous, although techniques for dealing with conformational heterogeneity are being developed. Images (micrographs) are taken with an electron microscope using charged-coupled device (CCD) detectors coupled to a phosphorescent layer (in the past, they were instead collected on film and digitized using high-quality scanners). The image processing is carried out using specialized software programs, often run on multi-processor computer clusters. Depending on the sample or the desired results, various steps of two- or three-dimensional processing can be done. === Alignment and classification === Biological samples, and especially samples embedded in thin vitreous ice, are highly radiation sensitive, thus only low electron doses can be used to image the sample. This low dose, as well as variations in the metal stain used (if used) means images have high noise relative to the signal given by the particle being observed. By aligning several similar images to each other so they are in register and then averaging them, an image with higher signal-to-noise ratio can be obtained. As the noise is mostly randomly distributed and the underlying image features constant, by averaging the intensity of each pixel over several images only the constant features are reinforced. Typically, the optimal alignment (a translation and an in-plane rotation) to map one image onto another is calculated by cross-correlation. However, a micrograph often contains particles in multiple different orientations and/or conformations, and so to get more representative image averages, a method is required to group similar particle images together into multiple sets. This is normally carried out using one of several data analysis and image classification algorithms, such as multi-variate statistical analysis and hierarchical ascendant classification, or k-means clustering. Often data sets of tens of thousands of particle images are used, and to reach an optimal solution an iterative procedure of alignment and classification is used, whereby strong image averages produced by classification are used as reference images for a subsequent alignment of the whole data set. === Image filtering === Image filtering (band-pass filtering) is often used to reduce the influence of high and/or low spatial frequency information in the images, which can affect the results of the alignment and classification procedures. This is particularly useful in negative stain images. The algorithms make use of fast Fourier transforms (FFT), often employing Gaussian shaped soft-edged masks in reciprocal space to suppress certain frequency ranges. High-pass filters remove low spatial frequencies (such as ramp or gradient effects), leaving the higher frequencies intact. Low-pass filters remove high spatial frequency features and have a blurring effect on fine details. === Contrast transfer function === Due to the nature of image formation in the electron microscope, bright-field TEM images are obtained using significant underfocus. This, along with features inherent in the microscope's lens system, creates blurring of the collected images visible as a point spread function. The combined effects of the imaging conditions are known as the contrast transfer function (CTF), and can be approximated mathematically as a function in reciprocal space. Specialized image processing techniques such as phase flipping and amplitude correction / Wiener filtering can (at least partially) correct for the CTF, and allow high resolution reconstructions. === Three-dimensional reconstruction === Transmission electron microscopy images are projections of the object showing the distribution of density through the object, similar to medical X-rays. By making use of the projection-slice theorem a three-dimensional reconstruction of the object can be generated by combining many images (2D projections) of the object taken from a range of viewing angles. Proteins in vitreous ice ideally adopt a random distribution of orientations (or viewing angles), allowing a fairly isotropic reconstruction if a large number of particle images are used. This contrasts with electron tomography, where the viewing angles are limited due to the geometry of the sample/imaging set up, giving an anisotropic reconstruction. Filtered back projection is a commonly used method of generating 3D reconstructions in single particle analysis, although many alternative algorithms exist. Before a reconstruction can be made, the orientation of the object in each image needs to be estimated. Several methods have been developed to work out the relative Euler angles of each image. Some are based on common lines (common 1D projections and sinograms), others use iterative projection matching algorithms. The latter works by beginning with a simple, low resolution 3D starting model and compares the experimental images to projections of the model and creates a new 3D to bootstrap towards a solution. Methods are also available for making 3D reconstructions of helical samples (such as tobacco mosaic virus), taking advantage of the inherent helical symmetry. Both real space methods (treating sections of the helix as single particles) and reciprocal space methods (using diffraction patterns) can be used for these samples. === Tilt methods === The specimen stage of the microscope can be tilted (typically along a single axis), allowing the single particle technique known as random conical tilt. An area of the specimen is imaged at both zero and at high angle (~60-70 degrees) tilts, or in the case of the related method of orthogonal tilt reconstruction, +45 and −45 degrees. Pairs of particles corresponding to the same object at two different tilts (tilt pairs) are selected, and by following the parameters used in subsequent alignment and classification steps a three-dimensional reconstruction can be generated relatively easily. This is because the viewing angle (defined as three Euler angles) of each particle is known from the tilt geometry. 3D reconstructions from random conical tilt suffer from missing information resulting from a restricted range of orientations. Known as the missing cone (due to the shape in reciprocal space), this causes distortions in the 3D maps. However, the missing cone problem can often be overcome by combining several tilt reconstructions. Tilt methods are best suited to negatively stained samples, and can be used for particles that adsorb to the carbon support film in preferred orientations. The phenomenon known as charging or beam-induced movement makes collecting high-tilt images of samples in vitreous ice challenging. === Map visualization and fitting === Various software programs are available that allow viewing the 3D maps. These often enable the user to manually dock in protein coordinates (structures from X-ray crystallography, NMR, or a computational model such as one found in the AlphaFold Protein Structure Database) of subunits into the electron density. Several programs can also fit subunits computationally; as of the 2020s using these programs tend to produce better accuracy than manual docking because they can perform labor-intensive tasks such as: The scale of SPA-derived maps depends on knowing the pixel size (angstorms per pixel), which is not always accurate. Programs can automatically correct for this difference by using coordinate data or by using knowledge of chemical bonds. Many proteins are made up of several roughly rigid protein domains linked by flexible parts. Pre-existing coordinate data, whether experimental or computational, may not exactly match the inter-domain positioning of the cyro-EM map. Modern programs can automatically "chop" pre-existing coordinate data into individual domains and fit them in individually. For higher-resolution structures, it is pos

    Read more →
  • Data Management Association

    Data Management Association

    The Data Management Association (DAMA), formerly known as the Data Administration Management Association, is a global not-for-profit organization which aims to advance concepts and practices about information management and data management. It describes itself as vendor-independent, all-volunteer organization, and has a membership consisting of technical and business professionals. Its international branch is called DAMA International (or DAMA-I), and DAMA also has various continental and national branches around the world. == History == The Data Management Association International was founded in 1980 in Los Angeles. Other early chapters were: San Francisco, Portland, Seattle, Minneapolis, New York, and Washington D.C. == Data Management Body of Knowledge == DAMA has published the Data Management Body of Knowledge (DMBOK), which contains suggestions on best practices and suggestions of a common vernacular for enterprise data management. The first edition (DAMA-DMBOK) was published on 2009 November 1, the second edition (DAMA-DMBOK2) was published on 2017 July 1., and the Revised second edition (DAMA-DMBOK2 rev.2) was published on 2019 March 19. DMBOK has been described by the authors as being an "equivalent" to the Project Management Body of Knowledge (PMBOK) and Business Analysis Body of Knowledge (BABOK). It encompasses topics such as data architecture, security, quality, modelling, governance, big data, data science, and more. DMBOK also includes the DAMA Data Wheel, an infographic which represents core data management practices. The center of the infographic is data governance, and the surrounding segments each represent a different aspect of data management: Data architecture Data modeling and design Data storage and operations Data security Data integration and interoperability Document management Content management Master data management Reference data and master data Data warehousing Metadata management Data quality Business intelligence Data science == Professional Accreditation == DAMA also provides a professional data management certification for individuals known as a Certified Data Management Professional (CDMP), which is based on the DMBOK as a study reference. There are four levels of certification based on career experience and exam results. The highest level, Fellow, requires 25 years of experience and nomination by DAMA members. It is an example of one of many competing certifications for data management professionals.

    Read more →
  • Clustered file system

    Clustered file system

    A clustered file system (CFS) is a file system which is shared by being simultaneously mounted on multiple servers. There are several approaches to clustering, most of which do not employ a clustered file system (only direct attached storage for each node). Clustered file systems can provide features like location-independent addressing and redundancy which improve reliability or reduce the complexity of the other parts of the cluster. Parallel file systems are a type of clustered file system that spread data across multiple storage nodes, usually for redundancy or performance. == Shared-disk file system == A shared-disk file system uses a storage area network (SAN) to allow multiple computers to gain direct disk access at the block level. Access control and translation from file-level operations that applications use to block-level operations used by the SAN must take place on the client node. The most common type of clustered file system, the shared-disk file system – by adding mechanisms for concurrency control – provides a consistent and serializable view of the file system, avoiding corruption and unintended data loss even when multiple clients try to access the same files at the same time. Shared-disk file-systems commonly employ some sort of fencing mechanism to prevent data corruption in case of node failures, because an unfenced device can cause data corruption if it loses communication with its sister nodes and tries to access the same information other nodes are accessing. The underlying storage area network may use any of a number of block-level protocols, including SCSI, iSCSI, HyperSCSI, ATA over Ethernet (AoE), Fibre Channel, network block device, and InfiniBand. There are different architectural approaches to a shared-disk filesystem. Some distribute file information across all the servers in a cluster (fully distributed). === Examples === == Distributed file systems == Distributed file systems do not share block level access to the same storage but use a network protocol. These are commonly known as network file systems, even though they are not the only file systems that use the network to send data. Distributed file systems can restrict access to the file system depending on access lists or capabilities on both the servers and the clients, depending on how the protocol is designed. The difference between a distributed file system and a distributed data store is that a distributed file system allows files to be accessed using the same interfaces and semantics as local files – for example, mounting/unmounting, listing directories, read/write at byte boundaries, system's native permission model. Distributed data stores, by contrast, require using a different API or library and have different semantics (most often those of a database). === Design goals === Distributed file systems may aim for "transparency" in a number of aspects. That is, they aim to be "invisible" to client programs, which "see" a system which is similar to a local file system. Behind the scenes, the distributed file system handles locating files, transporting data, and potentially providing other features listed below. Access transparency: clients are unaware that files are distributed and can access them in the same way as local files are accessed. Location transparency: a consistent namespace exists encompassing local as well as remote files. The name of a file does not give its location. Concurrency transparency: all clients have the same view of the state of the file system. This means that if one process is modifying a file, any other processes on the same system or remote systems that are accessing the files will see the modifications in a coherent manner. Failure transparency: the client and client programs should operate correctly after a server failure. Heterogeneity: file service should be provided across different hardware and operating system platforms. Scalability: the file system should work well in small environments (1 machine, a dozen machines) and also scale gracefully to bigger ones (hundreds through tens of thousands of systems). Replication transparency: Clients should not have to be aware of the file replication performed across multiple servers to support scalability. Migration transparency: files should be able to move between different servers without the client's knowledge. === History === The Incompatible Timesharing System used virtual devices for transparent inter-machine file system access in the 1960s. More file servers were developed in the 1970s. In 1976, Digital Equipment Corporation created the File Access Listener (FAL), an implementation of the Data Access Protocol as part of DECnet Phase II which became the first widely used network file system. In 1984, Sun Microsystems created the file system called "Network File System" (NFS) which became the first widely used Internet Protocol based network file system. Other notable network file systems are Andrew File System (AFS), Apple Filing Protocol (AFP), NetWare Core Protocol (NCP), and Server Message Block (SMB) which is also known as Common Internet File System (CIFS). In 1986, IBM announced client and server support for Distributed Data Management Architecture (DDM) for the System/36, System/38, and IBM mainframe computers running CICS. This was followed by the support for IBM Personal Computer, AS/400, IBM mainframe computers under the MVS and VSE operating systems, and FlexOS. DDM also became the foundation for Distributed Relational Database Architecture, also known as DRDA. There are many peer-to-peer network protocols for open-source distributed file systems for cloud or closed-source clustered file systems, e. g.: 9P, AFS, Coda, CIFS/SMB, DCE/DFS, WekaFS, Lustre, PanFS, Google File System, Mnet, Chord Project. === Examples === == Network-attached storage == Network-attached storage (NAS) provides both storage and a file system, like a shared disk file system on top of a storage area network (SAN). NAS typically uses file-based protocols (as opposed to block-based protocols a SAN would use) such as NFS (popular on UNIX systems), SMB/CIFS (Server Message Block/Common Internet File System) (used with MS Windows systems), AFP (used with Apple Macintosh computers), or NCP (used with OES and Novell NetWare). == Design considerations == === Avoiding single point of failure === The failure of disk hardware or a given storage node in a cluster can create a single point of failure that can result in data loss or unavailability. Fault tolerance and high availability can be provided through data replication of one sort or another, so that data remains intact and available despite the failure of any single piece of equipment. For examples, see the lists of distributed fault-tolerant file systems and distributed parallel fault-tolerant file systems. === Performance === A common performance measurement of a clustered file system is the amount of time needed to satisfy service requests. In conventional systems, this time consists of a disk-access time and a small amount of CPU-processing time. But in a clustered file system, a remote access has additional overhead due to the distributed structure. This includes the time to deliver the request to a server, the time to deliver the response to the client, and for each direction, a CPU overhead of running the communication protocol software. === Concurrency === Concurrency control becomes an issue when more than one person or client is accessing the same file or block and want to update it. Hence updates to the file from one client should not interfere with access and updates from other clients. This problem is more complex with file systems due to concurrent overlapping writes, where different writers write to overlapping regions of the file concurrently. This problem is usually handled by concurrency control or locking which may either be built into the file system or provided by an add-on protocol. == History == IBM mainframes in the 1970s could share physical disks and file systems if each machine had its own channel connection to the drives' control units. In the 1980s, Digital Equipment Corporation's TOPS-20 and OpenVMS clusters (VAX/ALPHA/IA64) included shared disk file systems.

    Read more →
  • Social recruiting

    Social recruiting

    Social recruiting (social hiring or social media recruitment) is recruiting candidates by using social platforms as talent databases or for advertising. Social recruiting uses social media profiles, blogs, and other Internet sites to find information on candidates. It also uses social media to advertise jobs either through HR vendors or through crowdsourcing where job seekers and others share job openings within their online social networks. Social recruiting's effectiveness and return on investment have been difficult to determine, since applicants do not usually apply through the social channels which first attracted them. In May 2013, Maximum Employment Marketing Group released the Social Recruitment Monitor, which ranks the reach, engagement, and interactivity of employers' social recruiting efforts around the world. == Social recruitment software == The social recruitment software market (a form of e-recruitment) is often included in the wider talent management software sector. Bersin & Associates valued the wider talent management market at over $2bn in 2007. Social recruitment increasingly sits at an intersection of a number of fast-moving areas including social networking, recruitment and now cloud computing. Additionally, mobile recruiting has become another hot topic, especially with the rise in tablet and smartphone usage. In 2012, there was a rise of tech companies using social recruiting applications to find and screen applicants. As more companies saw value in filling jobs by putting them on the social platforms where millions of people spend at least 37 minutes daily, there developed a much larger focus on social recruiting among the talent acquisition community. By mid-2013, many major enterprise companies such as Pepsi, Gap, AIG, and Oracle had begun effectively utilizing social recruiting software, making it clear that large corporations were open to automating or streamlining (and ultimately investing in) their social recruiting processes.

    Read more →
  • Umple

    Umple

    Umple is a language for both object-oriented programming and modelling with class diagrams and state diagrams. The name Umple is a portmanteau of "UML", "ample" and "Simple", indicating that it is designed to provide ample features to extend programming languages with UML capabilities. == History and philosophy == The design of Umple started in 2008 at the University of Ottawa. Umple was open-sourced and its development was moved to Google Code in early 2011 and to GitHub in 2015. Umple was developed, in part, to address certain problems observed in the modelling community. Most specifically, it was designed to bring modelling and programming into alignment, It was intended to help overcome inhibitions against modelling common in the programmer community. It was also intended to reduce some of the difficulties of model-driven development that arise from the need to use large, expensive or incomplete tools. One design objective is to enable programmers to model in a way they see as natural, by adding modelling constructs to programming languages. == Features and capabilities == Umple can be used to represent in a textual manner many UML modelling entities found in class diagrams and state diagrams. Umple can generate code for these in various programming languages. Currently Umple fully supports Java, C++ and PHP as target programming languages and has functional, but somewhat incomplete support for Ruby. Umple also incorporates various features not related to UML, such as the singleton pattern, keys, immutability, mixins and aspect-oriented code injection. The class diagram notations Umple supports includes classes, interfaces, attributes, associations, generalizations and operations. The code Umple generates for attributes include code in the constructor, 'get' methods and 'set' methods. The generated code differs considerably depending on whether the attribute has properties such as immutability, has a default value, or is part of a key. Umple generates many methods for manipulating, querying and navigating associations. It supports all combinations of UML multiplicity and enforces referential integrity. Umple supports the vast majority of UML state machine notation, including arbitrarily deep nested states, concurrent regions, actions on entry, exit and transition, plus long-lasting activities while in a state. A state machine is treated as an enumerated attribute where the value is controlled by events. Events encoded in the state machine can be methods written by the user, or else generated by the Umple compiler. Events are triggered by calling the method. An event can trigger transitions (subject to guards) in several different state machines. Since a program can be entirely written around one or more state machines, Umple enables automata-based programming. The bodies of methods are written in one of the target programming languages. The same is true for other imperative code such as state machine actions and guards, and code to be injected in an aspect-oriented manner. Such code can be injected before many of the methods in the code Umple generates, for example before or after setting or getting attributes and associations. The Umple notation for UML constructs can be embedded in any of its supported target programming languages. When this is done, Umple can be seen as a pre-processor: The Umple compiler expands the UML constructs into code of the target language. Code in a target language can be passed to the Umple compiler directly; if no Umple-specific notation is found, then the target-language code is emitted unchanged by the Umple compiler. Umple, combined with one of its target languages for imperative code, can be seen and used as a complete programming language. Umple plus Java can therefore be seen as an extension of Java. Alternatively, if imperative code and Umple-specific concepts are left out, Umple can be seen as a way of expressing a large subset of UML in a purely textual manner. Code in one of the supported programming languages can be added in the same manner as UML envisions adding action language code. == License == Umple is licensed under an MIT-style license. == Examples == Here is the classic Hello world program written in Umple (extending Java): This example looks just like Java, because Umple extends other programming languages. With the program saved in a file named HelloWorld.ump, it can be compiled from the command line: $ java -jar umple.jar HelloWorld.ump To run it: $ java HelloWorld The following is a fully executable example showing embedded Java methods and declaration of an association. The following example describes a state machine called status, with states Open, Closing, Closed, Opening and HalfOpen, and with various events that cause transitions from one state to another. class GarageDoor { status { Open { buttonOrObstacle -> Closing; } Closing { buttonOrObstacle -> Opening; reachBottom -> Closed; } Closed { buttonOrObstacle -> Opening; } Opening { buttonOrObstacle -> HalfOpen; reachTop -> Open; } HalfOpen { buttonOrObstacle -> Opening; } } } == Umple use in practice == The first version of the Umple compiler was written in Java, Antlr and Jet (Java Emitter Templates), but in a bootstrapping process, the Java code was converted to Umple following a technique called Umplification. The Antlr and Jet were also later converted to native Umple. Umple is therefore now written entirely in itself, in other words it is self-hosted and serves as its own largest test case. Umple and UmpleOnline have been used in the classroom by several instructors to teach UML and modelling. In one study it was found to help speed up the process of teaching UML, and was also found to improve the grades of students. == Tools == Umple is available as a Jar file so it can be run from the command line, and as an Eclipse plugin. There is also an online tool for Umple called UmpleOnline , which allows a developer to create an Umple system by drawing a UML class diagram, editing Umple code or both. Umple models created with UmpleOnline are stored in the cloud. Currently UmpleOnline only supports Umple programs consisting of a single input file. In addition to code, Umple's tools can generate a variety of other types of output, including user interfaces based on the Umple model.

    Read more →
  • Secret London

    Secret London

    Secret London is a Facebook group started by 21-year-old Bristol University graduate, Tiffany Philippou, on 19 January 2010 in response to a Saatchi & Saatchi competition. The group grew rapidly (180,000 members as of 8 February 2010) and is composed mostly of Londoners who use the site to share suggestions and photos of London. After the group's early success, the founder announced her intention to launch a website of the same name by crowdsourcing the design and development. The website was launched on 16 February 2010. == Other secret cities == Following the initial success of Secret London, a number of other secret groups were independently started around the world, some of which already have over 100,000 users. As of 19 February 2010, the list of other groups includes: Secret Frankfurt, Secret Tel Aviv, Secret Paris, Secret New York, Secret Tokyo, Secret Toronto, Secret Los Angeles, Secret Exeter, Secret Boston, Secret Norwich, Secret Singapore, Secret Brighton, Secret Minneapolis, Secret Sydney, Secret Canberra, Secret Brisbane, Secret Wellington, Secret Christchurch, Secret Madeira, Secret Funchal, Secret Bristol and Secret Cardiff. == Controversy == Some commentators have questioned whether it possible to share secrets without compromising them, and whether sharing tips publicly will lead to over-exposure of the businesses who are recommended.

    Read more →
  • Social network hosting service

    Social network hosting service

    A social network hosting service is a web hosting service that specifically hosts the user creation of web-based social networking services, alongside related applications. Such services are also known as vertical social networks due to the creation of SNSes which cater to specific user interests and niches; like larger, interest-agnostic SNSes, such niche networking services may also possess the ability to create increasingly niche groups of users. == List of social network hosting services == Federated Media Publishing's BigTent BroadVision Clearvale Ning Wall.fm

    Read more →