AI Avatar For Zoom Meetings

AI Avatar For Zoom Meetings — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  SEMAT

  SEMAT (Software Engineering Method and Theory) is an initiative to reshape software engineering such that software engineering qualifies as a rigorous discipline. The initiative was launched in December 2009 by Ivar Jacobson, Bertrand Meyer, and Richard Soley with a call for action statement and a vision statement. The initiative was envisioned as a multi-year effort for bridging the gap between the developer community and the academic community and for creating a community giving value to the whole software community. The work is now structured in four different but strongly related areas: Practice, Education, Theory, and Community. The Practice area primarily addresses practices. The Education area is concerned with all issues related to training for both the developers and the academics including students. The Theory area is primarily addressing the search for a General Theory in Software Engineering. Finally, the Community area works with setting up legal entities, creating websites and community growth. It was expected that the Practice area, the Education area and the Theory area would at some point in time integrate in a way of value to all of them: the Practice area would be a "customer" of the Theory area, and direct the research to useful results for the developer community. The Theory area would give a solid and practical platform for the Practice area. And, the Education area would communicate the results in proper ways. == Practice area == The first step was here to develop a common ground or a kernel including the essence of software engineering – things we always have, always do, always produce when developing software. The second step was envisioned to add value on top of this kernel in the form of a library of practices to be composed to become specific methods, specific for all kinds of reasons such as the preferences of the team using it, kind of software being built, etc. The first step is as of this writing just about to be concluded. The results are a kernel including universal elements for software development – called the Essence Kernel, and a language – called the Essence Language - to describe these elements (and elements built on top of the kernel (practices, methods, and more). Essence, including both the kernel and language, has been published as an OMG standard in beta status in July 2013 and is expected to become a formally adopted standard in early 2014. The second step has just started, and the Practice area will be divided into a number of separate but interconnected tracks: the practice (library track), the tool track are so far identified and work has started or is about to get started. The practice track is currently working on a Users Guide. == Education area == The area focuses on leveraging the work of SEMAT in software engineering education, both within academia and industry. It promotes global education based on a common ground called Essence. The area's target groups are instructors such as university professors and industrial coaches as well as their students and learning practitioners. The goal of the area is to create educational courses and course materials that are internationally viable, identify pedagogical approaches that are appropriate and effective for specific target groups and disseminate experience and lessons learned. The area includes members from a number of universities and institutes worldwide. Most members have already been involved in leveraging aspects of SEMAT in the context of their software engineering courses. They are gathering their resources and starting a common venture towards defining a new generation of SEMAT-powered software engineering curricula. As of 2018, some studies of utilizing Essence in educational settings exist. One example of the use of Essence in university education was a software engineering course carried out in Norwegian University of Science and Technology. A study was conducted by introducing Essence into a project-based software engineering course, with the aim of understanding what difficulties the students faced in using Essence, and whether they considered it to have been useful. The results indicated that Essence could also be useful for novice software engineers by (1) encouraging them to look up and study new practices and methods in order to create their own, (2) encouraging them to adjust their way-of-working reflectively and in a situation-specific manner, (3) helping them structure their way of working. The findings of another study introducing students to Essence through a digital game supported these findings: the students felt that Essence will be useful to them in future, real-world projects, and that they wish to utilize it in them. == Theory area == An important part of SEMAT is that a general theory of software engineering is planned to emerge with significant benefits. A series of workshops held under the title SEMAT Workshop on a General Theory of Software Engineering (GTSE) are a key component in awareness building around general theories. In addition to community awareness building, SEMAT also aims to contribute with a specific general theory of software engineering. This theory should be solidly based on the SEMAT Essence language and kernel, and should support software engineering practitioners' goal-oriented decision making. As argued elsewhere, such support is predicated on the predictive capabilities of the theory. Thus, the SEMAT Essence should be augmented to allow the prediction of critical software engineering phenomena. The GTSE workshop series assists in the development of the SEMAT general software engineering theory by engaging a larger community in the search for, development of, and evaluation of promising theories, which may be used as a base for the SEMAT theory. == Organizational structure == === Main organization === SEMAT is chaired by Sumeet S. Malhotra of Tata Consultancy Services. The CEO of the organization is Ste Nadin of Fujitsu. The Executive Management Committee of SEMAT are Ivar Jacobson, Ste Nadin, Sumeet S. Malhotra, Paul E. McMahon, Michael Goedicke and Cecile Peraire. === Japan Chapter === Japan Chapter was established in April 2013, and it has more than 250 members as of November 2013. Member activities include carrying out seminars about SEMAT, considering utilization of SEMAT Essence for integrating different requirements engineering techniques and body of knowledges (BoKs), and translating articles into Japanese. === Korea Chapter === The chapter was inaugurated with about 50 members in October 2013. Member activities include: 2e Consulting started rewriting their IT service engagement methods using the Essence kernel, and uEngine Solutions started developing a tool to orchestrate Essence-kernel based practices into a project method. Korean government supported KAIST to conduct research in Essence. === Latin American Chapter === Semat Latin American Chapter was created in August 2011 in Medellin (Colombia) by Ivar Jacobson during the Latin American Software Engineering Symposium. This Chapter has 9 Executive Committee members from Colombia, Venezuela, Peru, Brazil, Argentina, Chile, and Mexico, chaired by Dr. Carlos Zapata from Colombia. More than 80 people signed the initial declaration of the Chapter and nowadays the Chapter members are in charge of disseminating the Semat ideas in all Latin America. Chapter members have participated in various Latin American conferences, including the Latin American Conference on Informatics (CLEI), the Ibero American Software Engineering and Knowledge Engineering Journeys (JIISIC), the Colombian Computing Conference (CCC), and the Chilean Computing Meeting (ECC). The Chapter contributed in the submission sent in response to the OMG call for proposals and currently studies didactic strategies for teaching the Semat kernel by games, theoretical studies about some kernel elements, and practical representations of several software development and quality methods by using the Semat kernel. Some of the members also translated the Essence book and some other Semat materials and papers into Spanish. === Russia Chapter === Russian Chapter has about 20 members. A few universities have incorporated SEMAT in their training courses , including Moscow State University, Moscow Institute of Physics and Technology, Higher School of Economics, Moscow State University of Economics, Statistics, and Informatics. The chapter and some commercial companies are carrying out seminars about SEMAT. INCOSE Russian Chapter is working on an extension of SEMAT to systems engineering. EC-leasing is working on an extension of the Kernel for Software Life Cycle. Russian Chapter attended in two conferences: Actual Problems of System and Software Engineering and SECR with SEMAT section and articles. Translation of the Essence book into Russian is in progress. == Practical Applications of SEMAT == Ideas developed by the SEMAT community have been applied by both industry and ac

  Read more →
• 

  Artisse AI

  Artisse AI is a Hong Kong-based technology company founded by William Wu. The company developed a mobile photography application using generative artificial intelligence to transform selfies into high-quality, personalized images. The app allows users to visualize themselves in various scenarios, outfits, and hairstyles, and they can adjust lighting and ambiance to match their preferences. The app launched in 2023 across multiple markets, including the United States, United Kingdom, Japan, South Korea, Canada, and Australia. By January 2024, users had generated over 5 million images. That same month, the company secured $6.7 million in seed funding to support product development and marketing. == History == Artisse was originally founded in South Korea in 2022 by William Wu. The early concept was connected to a virtual idol initiative developed in collaboration with a K-pop agency, intended to support Wu's blockchain gaming business. The project later evolved into a standalone AI photography application. The current version of the Artisse app was developed following the company's relocation to Hong Kong in 2022. In January 2024, Artisse secured $6.7 million in seed funding, led by The London Fund. The investment was aimed at supporting product development, marketing, and user acquisition. Artisse uses an AI algorithm to create hyperrealistic images from uploaded photos. The app generates personalized images by combining generative AI technology, a global pool of licensed talent, and finished art services. The app works with individual users and businesses, offering professional-grade photos and advertisement images. According to the British newspaper Evening Standard the company has developed the world's first and most advanced AI photographer. It captures 15-30 photos of the user and generates 2D images, placing them in various outfits and locations worldwide. === Catheron Gaming === Artisse AI originated from Catheon Gaming, a blockchain gaming and entertainment company founded in 2021 by William Wu. Catheon Gaming published more than 30 Web3 titles in its first year, developed a blockchain game distribution platform, and offered advisory services to external developers. In 2022, HSBC and KPMG listed Catheon Gaming among the "Top 10 Emerging Giants" in the Asia–Pacific region, selected from a pool of more than 6,000 startups. In June 2023, Catheon Gaming was rebranded as Artisse Interactive, creating two divisions: Artisse Gaming, which continued blockchain and Web3 game development, and Artisse AI, which focused on generative photography technology. == Technology == Artisse uses a proprietary generative AI model combined with open-source imaging frameworks and diffusion models. Users are prompted to upload between 15 and 30 personal images, allowing the AI to train a personalized model in 30 to 40 minutes. After training, the app generates new images based on either textual or visual prompts, with options to adjust elements such as clothing, hairstyles, lighting, and backgrounds. To enhance realism, the app integrates augmented reality features and image refinement tools. The company has introduced features to address representation issues related to body shape and skin tone, although concerns persist about the ethical implications of altering personal traits. == Products == === Artisse mobile app === Available on iOS and Android platforms in 35 languages. Users initially receive 25 free images, after which the app adopts a subscription pricing model ranging from approximately $6 to $30 per month. By early 2024, the app reported around 4,000 paying subscribers out of more than 200,000 downloads. === Business and enterprise services === Artisse provides B2B solutions for creating marketing imagery and partners with agencies like Iconic Management to enable cost-effective virtual photoshoots. Additional features in development include virtual try-on capabilities and augmented reality integration for fashion retail. == Reception == Media coverage has noted the app's photorealistic image outputs with some sources highlighting its ease of use. However, concerns have been raised regarding image authenticity, algorithmic biases, and the potential impact on professional photography and modeling. Artisse has been widely covered by media outlets including TechCrunch, PetaPixel, Forbes Australia, and The Evening Standard. These publications discussed the app's integration of generative AI technology within the consumer photography space, its growing market influence, and its rapid adoption by users worldwide.

  Read more →
• 

  Logistics automation

  Logistics automation is the application of computer software or automated machinery to logistics operations in order to improve its efficiency. Typically this refers to operations within a warehouse or distribution center, with broader tasks undertaken by supply chain engineering systems and enterprise resource planning systems. Logistics automation systems can powerfully complement the facilities provided by these higher level computer systems. The focus on an individual node within a wider logistics network allows systems to be highly tailored to the requirements of that node. == Components == Logistics automation systems comprise a variety of hardware and software components: Fixed machinery Automated storage and retrieval systems, including: Cranes serve a rack of locations, allowing many levels of stock to be stacked vertically, and allowing for higher storage densities and better space utilization than alternatives. In systems produced by Amazon Robotics, automated guided vehicles move items to a human picker. Conveyors: Containers can enter automated conveyors in one area of the warehouse and, either through hard-coded rules or data input, be moved to a selected destination. Vertical carousels based on the paternoster lift system or using space optimization, similar to vending machines, but on a larger scale. Sortation systems: similar to conveyors but typically with higher capacity and able to divert containers more quickly. Typically used to distribute high volumes of small cartons to a large set of locations. Industrial robots: four- to six-axis industrial robots, e.g. palletizing robots, are used for palletizing, depalletizing, packaging, commissioning and order picking. Typically all of these will automatically identify and track containers using barcodes or, increasingly, RFID tags. Motion check weighers may be used to reject cases or individual products that are under or over their specified weight. They are often used in kitting conveyor lines to ensure all pieces belonging in the kit are present. Mobile technology Radio data terminals: these are handheld or truck-mounted terminals which connect by radio to logistics automation software and provide instructions to operators moving throughout the warehouse. Many also have barcode scanners to allow identification of containers more quickly and accurately than manual keyboard entry. Software Integration software: this provides overall control of the automation machinery and allows cranes to be connected to conveyors for seamless stock movements. Operational control software: provides low-level decision-making, such as where to store incoming containers, and where to retrieve them when requested. Business control software: provides higher-level functionality, such as identification of incoming deliveries/stock, scheduling order fulfillment, and assignment of stock to outgoing trailers. == Benefits == A typical warehouse or distribution center will receive stock of a variety of products from suppliers and store these until the receipt of orders from customers, whether individual buyers (e.g. mail order), retail branches (e.g. chain stores), or other companies (e.g. wholesalers). A logistics automation system may provide the following: Automated goods in processes: Incoming goods can be marked with barcodes and the automation system notified of the expected stock. On arrival, the goods can be scanned and thereby identified, and taken via conveyors, sortation systems, and automated cranes into an automatically assigned storage location. Automated goods retrieval for orders: On receipt of orders, the automation system is able to immediately locate goods and retrieve them to a pick-face location. Automated dispatch processing: Combining knowledge of all orders placed at the warehouse the automation system can assign picked goods into dispatch units and then into outbound loads. Sortation systems and conveyors can then move these onto the outgoing trailers. If needed, repackaging to ensure proper protection for further distribution or to change the package format for specific retailers/customers. A complete warehouse automation system can drastically reduce the workforce required to run a facility, with human input required only for a few tasks, such as picking units of product from a bulk packed case. Even here, assistance can be provided with equipment such as pick-to-light units. Smaller systems may only be required to handle part of the process. Examples include automated storage and retrieval systems, which simply use cranes to store and retrieve identified cases or pallets, typically into a high-bay storage system which would be unfeasible to access using fork-lift trucks or any other means. The use of Automatic Guided Vehicles maximizes the output compared to humans since they can do repetitive tasks for long hours and with least to no supervision. An AGV is built and programmed for precision and accuracy thereby reducing the chances of errors in a warehouse, especially when dealing with fragile goods. == Automation software == Software or cloud-based SaaS solutions are used for logistics automation which helps the supply chain industry in automating the workflow as well as management of the system. Knowledge @ Wharton staff writers noted in 2011 that some manufacturers and retailers were weathering the Great Recession "by signing up for pay-as-you-go logistics services available through the Internet 'cloud'". They identified the benefits and reduced costs which came from sharing information about shipments with suppliers, hauliers and end users. There is little generalized software available in this market. This is because there is no rule to generalize the system as well as work flow even though the practice is more or less the same. Most of the commercial companies do use one or the other of the custom solutions. But there are various software solutions that are being used within the departments of logistics. There are a few departments in Logistics, namely: Conventional Department, Container Department, Warehouse, Marine Engineering, Heavy Haulage, etc. Software used in these departments Conventional department : CVT software / CTMS software. Container Trucking: CTMS software Warehouse : WMS/WCS Improving Effectiveness of Logistics Management Logistical Network Information Transportation Sound Inventory Management Warehousing, Materials Handling & Packaging

  Read more →
• 

  Qlone

  Qlone is a 3D scanning app based on photogrammetry for creation of 3D models on mobile devices. The resultant 3D models can be exported for external use. Qlone was featured at the Apple Worldwide Developers Conference in 2021. It was also featured on BBC Click. == Qlone features == === 3D scanning === 3D scanning with Qlone requires the use of an included mat design. The user prints the mat onto a sheet of paper, then places the object to be scanned in the centre of the mat. An augmented reality dome within the Qlone app guides the user through the subsequent scanning process. The iOS version of Qlone allows scanning without the mat. === 3D editing === Qlone's editing features allow users to adjust 3D scanned models using texture mapping, polygon mesh size simplification, digital sculpting, cleaning and smoothing, and artistic effects. === File export === Qlone exports directly to multiple 3D platforms including SketchFab, i.materialise, Lens Studio for Snapchat, Shapeways and CGTrader. Models can also be exported in different 3D formats for use in other 3D tools – OBJ, STL, FBX, USDZ, GLB (Binary gLTF), PLY, and X3D. == Use in Science, Education and Academia == Due to its inexpensive, simple and accessible nature for creating 3D models, Qlone was used in many academically educational and scientific research projects. The European Space Agency used Qlone to scan rocks in a Tele-Robotic rock collection experiment. Neurosurgeons from the University of Southern California and surgeons from Tulane University School of Medicine used Qlone to create 3D models of cadaveric specimens and anatomical models with the aim of increasing access to such components for enhancing anatomy training and allowing realistic surgical simulations for neurosurgeons and practitioners worldwide. Archaeologists from Texas A&M University used Qlone to create 3D replicas of artifacts and models and students from Vancouver iTech Preparatory Middle School used Qlone to create 3D scans of more than 100 artifacts from Fort Vancouver National Historic Site.

  Read more →
• 

  Neural operators

  Neural operators are a class of deep learning architectures designed to learn maps between infinite-dimensional function spaces. Neural operators represent an extension of traditional artificial neural networks, marking a departure from the typical focus on learning mappings between finite-dimensional Euclidean spaces or finite sets. Neural operators directly learn operators between function spaces; they can receive input functions, and the output function can be evaluated at any discretization. The primary application of neural operators is in learning surrogate maps for the solution operators of partial differential equations (PDEs), which are critical tools in modeling the natural environment. Standard PDE solvers can be time-consuming and computationally intensive, especially for complex systems. Neural operators have demonstrated improved performance in solving PDEs compared to existing machine learning methodologies while being significantly faster than numerical solvers. Neural operators have also been applied to various scientific and engineering disciplines such as turbulent flow modeling, computational mechanics, graph-structured data, and the geosciences. In particular, they have been applied to learning stress-strain fields in materials, classifying complex data like spatial transcriptomics, predicting multiphase flow in porous media, and carbon dioxide migration simulations. Finally, the operator learning paradigm allows learning maps between function spaces, and is different from parallel ideas of learning maps from finite-dimensional spaces to function spaces, and subsumes these settings as special cases when limited to a fixed input resolution. == Operator learning == Understanding and mapping relationships between function spaces has many applications in engineering and the sciences. In particular, one can cast the problem of solving partial differential equations as identifying a map between function spaces, such as from an initial condition to a time-evolved state. In other PDEs this map takes an input coefficient function and outputs a solution function. Operator learning is a machine learning paradigm to learn solution operators mapping the input function to the output function . Using traditional machine learning methods, addressing this problem would involve discretizing the infinite-dimensional input and output function spaces into finite-dimensional grids and applying standard learning models, such as neural networks. This approach reduces the operator learning to finite-dimensional function learning and has some limitations, such as generalizing to discretizations beyond the grid used in training. The primary properties of neural operators that differentiate them from traditional neural networks is discretization invariance and discretization convergence. Unlike conventional neural networks, which are fixed on the discretization of training data, neural operators can adapt to various discretizations without re-training. This property improves the robustness and applicability of neural operators in different scenarios, providing consistent performance across different resolutions and grids. == Definition and formulation == Architecturally, neural operators are similar to feed-forward neural networks in the sense that they are composed of alternating linear maps and non-linearities. Since neural operators act on and output functions, neural operators have been instead formulated as a sequence of alternating linear integral operators on function spaces and point-wise non-linearities. Using an analogous architecture to finite-dimensional neural networks, similar universal approximation theorems have been proven for neural operators. In particular, it has been shown that neural operators can approximate any continuous operator on a compact set. Neural operators seek to approximate some operator G : A → U {\displaystyle {\mathcal {G}}:{\mathcal {A}}\to {\mathcal {U}}} between function spaces A {\displaystyle {\mathcal {A}}} and U {\displaystyle {\mathcal {U}}} by building a parametric map G ϕ : A → U {\displaystyle {\mathcal {G}}_{\phi }:{\mathcal {A}}\to {\mathcal {U}}} . Such parametric maps G ϕ {\displaystyle {\mathcal {G}}_{\phi }} can generally be defined in the form G ϕ := Q ∘ σ ( W T + K T + b T ) ∘ ⋯ ∘ σ ( W 1 + K 1 + b 1 ) ∘ P , {\displaystyle {\mathcal {G}}_{\phi }:={\mathcal {Q}}\circ \sigma (W_{T}+{\mathcal {K}}_{T}+b_{T})\circ \cdots \circ \sigma (W_{1}+{\mathcal {K}}_{1}+b_{1})\circ {\mathcal {P}},} where P , Q {\displaystyle {\mathcal {P}},{\mathcal {Q}}} are the lifting (lifting the codomain of the input function to a higher dimensional space) and projection (projecting the codomain of the intermediate function to the output dimension) operators, respectively. These operators act pointwise on functions and are typically parametrized as multilayer perceptrons. σ {\displaystyle \sigma } is a pointwise nonlinearity, such as a rectified linear unit (ReLU), or a Gaussian error linear unit (GeLU). Each layer t = 1 , … , T {\displaystyle t=1,\dots ,T} has a respective local operator W t {\displaystyle W_{t}} (usually parameterized by a pointwise neural network), a kernel integral operator K t {\displaystyle {\mathcal {K}}_{t}} , and a bias function b t {\displaystyle b_{t}} . Given some intermediate functional representation v t {\displaystyle v_{t}} with domain D {\displaystyle D} in the t {\displaystyle t} -th hidden layer, a kernel integral operator K ϕ {\displaystyle {\mathcal {K}}_{\phi }} is defined as ( K ϕ v t ) ( x ) := ∫ D κ ϕ ( x , y , v t ( x ) , v t ( y ) ) v t ( y ) d y , {\displaystyle ({\mathcal {K}}_{\phi }v_{t})(x):=\int _{D}\kappa _{\phi }(x,y,v_{t}(x),v_{t}(y))v_{t}(y)dy,} where the kernel κ ϕ {\displaystyle \kappa _{\phi }} is a learnable implicit neural network, parametrized by ϕ {\displaystyle \phi } . In practice, one is often given the input function to the neural operator at a specific resolution. For instance, consider the setting where one is given the evaluation of v t {\displaystyle v_{t}} at n {\displaystyle n} points { y j } j n {\displaystyle \{y_{j}\}_{j}^{n}} . Borrowing from Nyström integral approximation methods such as Riemann sum integration and Gaussian quadrature, the above integral operation can be computed as follows: ∫ D κ ϕ ( x , y , v t ( x ) , v t ( y ) ) v t ( y ) d y ≈ ∑ j n κ ϕ ( x , y j , v t ( x ) , v t ( y j ) ) v t ( y j ) Δ y j , {\displaystyle \int _{D}\kappa _{\phi }(x,y,v_{t}(x),v_{t}(y))v_{t}(y)dy\approx \sum _{j}^{n}\kappa _{\phi }(x,y_{j},v_{t}(x),v_{t}(y_{j}))v_{t}(y_{j})\Delta _{y_{j}},} where Δ y j {\displaystyle \Delta _{y_{j}}} is the sub-area volume or quadrature weight associated to the point y j {\displaystyle y_{j}} . Thus, a simplified layer can be computed as v t + 1 ( x ) ≈ σ ( ∑ j n κ ϕ ( x , y j , v t ( x ) , v t ( y j ) ) v t ( y j ) Δ y j + W t ( v t ( y j ) ) + b t ( x ) ) . {\displaystyle v_{t+1}(x)\approx \sigma \left(\sum _{j}^{n}\kappa _{\phi }(x,y_{j},v_{t}(x),v_{t}(y_{j}))v_{t}(y_{j})\Delta _{y_{j}}+W_{t}(v_{t}(y_{j}))+b_{t}(x)\right).} The above approximation, along with parametrizing κ ϕ {\displaystyle \kappa _{\phi }} as an implicit neural network, results in the graph neural operator (GNO). There have been various parameterizations of neural operators for different applications. These typically differ in their parameterization of κ {\displaystyle \kappa } . The most popular instantiation is the Fourier neural operator (FNO). FNO takes κ ϕ ( x , y , v t ( x ) , v t ( y ) ) := κ ϕ ( x − y ) {\displaystyle \kappa _{\phi }(x,y,v_{t}(x),v_{t}(y)):=\kappa _{\phi }(x-y)} and by applying the convolution theorem, arrives at the following parameterization of the kernel integral operator: ( K ϕ v t ) ( x ) = F − 1 ( R ϕ ⋅ ( F v t ) ) ( x ) , {\displaystyle ({\mathcal {K}}_{\phi }v_{t})(x)={\mathcal {F}}^{-1}(R_{\phi }\cdot ({\mathcal {F}}v_{t}))(x),} where F {\displaystyle {\mathcal {F}}} represents the Fourier transform and R ϕ {\displaystyle R_{\phi }} represents the Fourier transform of some periodic function κ ϕ {\displaystyle \kappa _{\phi }} . That is, FNO parameterizes the kernel integration directly in Fourier space, using a prescribed number of Fourier modes. When the grid at which the input function is presented is uniform, the Fourier transform can be approximated using the discrete Fourier transform (DFT) with frequencies below some specified threshold. The discrete Fourier transform can be computed using a fast Fourier transform (FFT) implementation. == Training == Training neural operators is similar to the training process for a traditional neural network. Neural operators are typically trained in some Lp norm or Sobolev norm. In particular, for a dataset { ( a i , u i ) } i = 1 N {\displaystyle \{(a_{i},u_{i})\}_{i=1}^{N}} of size N {\displaystyle N} , neural operators minimize (a discretization of) L U ( { ( a i , u i ) } i = 1 N ) := ∑ i = 1 N ‖ u i − G θ ( a i ) ‖ U 2 {\displaystyle {\mathcal {L}}_{\mathca

  Read more →
• 

  Cepstral mean and variance normalization

  Cepstral mean and variance normalization (CMVN) is a computationally efficient normalization technique for robust speech recognition. The performance of CMVN is known to degrade for short utterances. This is due to insufficient data for parameter estimation and loss of discriminable information as all utterances are forced to have zero mean and unit variance. CMVN minimizes distortion by noise contamination for robust feature extraction by linearly transforming the cepstral coefficients to have the same segmental statistics. Cepstral Normalization has been effective in the CMU Sphinx for maintaining a high level of recognition accuracy over a wide variety of acoustical environments. == Cepstral Normalization Techniques == There are multiple algorithms that achieve Cepstral Normalization in different ways. === Fixed codeword-dependent cepstral normalization (FCDCN) === FCDCN was developed to provide a form of compensation that provides greater recognition accuracy than SDCN but in a more computationally-efficient manner than the CDCN algorithm. The FCDCN algorithm applies an additive correction that depends on the instantaneous SNR of the input (like SDCN), but that can also vary from codeword to codeword (like CDCN). === Multiple Fixed Codeword-dependent Cepstral Normalization (MFCDCN) === MFCDCN is a simple extension of FCDCN algorithm that does not need environment specific training. In MFCDCN, compensation vectors are pre-computed in parallel for a set of target environments, using the FCDCN algorithm. === Incremental Multiple Fixed Codeword-dependent Cepstral Normalization (IMFCDCN) === While environment selection for the compensation vectors of MFCDCN is generally performed on an utterance-by-utterance basis, IMFCFCN improves on it by allowing the classification process to make use of cepstral vectors from previous utterances in a given session. == Cepstral Noise Subtraction == Automatic speech recognition (ASR) describes the steps of transcribing speech utterances represented as acoustic wave forms to written words. As is, CMVN has been used in different applications as this technique has proven to provide better speech recognitions results in different environments. CMVN has the capabilities to reduce differences between test and training data produced by channel distortions and colorizations . CMVN has also been found to be able to reduce differences in feature representation between speakers can also partly reduce the influence of background noise.

  Read more →
• 

  YaDICs

  YaDICs is a program written to perform digital image correlation on 2D and 3D tomographic images. The program was designed to be both modular, by its plugin strategy and efficient, by it multithreading strategy. It incorporates different transformations (Global, Elastic, Local), optimizing strategy (Gauss-Newton, Steepest descent), Global and/or local shape functions (Rigid-body motions, homogeneous dilatations, flexural and Brazilian test models)... == Theoretical background == === Context === In solid mechanics, digital image correlation is a tool that allows to identify the displacement field to register a reference image (called herein fixed image) to images during an experiment (mobile image). For example, it is possible to observe the face of a specimen with a painted speckle on it in order to determine its displacement fields during a tensile test. Before the appearance of such methods, researchers usually used strain gauges to measure the mechanical state of the material but strain gauges only measure the strain on a point and don't allow to understand material with an heterogeneous behavior. One can obtain a full in plane strain tensor by derivation of the displacement fields. Many methods are based upon the optical flow. In fluid mechanics a similar method is used, called Particle Image Velocimetry (PIV); the algorithms are similar to those of DIC but it is impossible to ensure that the optical flow is conserved so a vast majority of the software used the normalized cross correlation metric. In mechanics the displacement or velocity fields are the only concern, registering images is just a side effect. There is another process called image registration using the same algorithms (on monomodal images) but where the goal is to register images and thereby identifying the displacement field is just a side effect. YaDICs uses the general principle of image registration with a particular attention to the displacement fields basis. === Image registration principle === YaDICs can be explained using the classical image registration framework: === Image registration general scheme === The common idea of image registration and digital image correlation is to find the transformation between a fixed image and a moving one for a given metric using an optimization scheme. While there are many methods to achieve such a goal, Yadics focuses on registering images with the same modality. The idea behind the creation of this software is to be able to process data that comes from a μ-tomograph; i.e.: data cube over 10003 voxels. With such a size it is not possible to use naive approach usually used in a two-dimensional context. In order to get sufficient performances OpenMP parallelism is used and data are not globally stored in memory. As an extensive description of the different algorithms is given in. === Sampling === Contrary to image registration, Digital Image Correlation targets the transformation, one wants to extracted the most accurate transformation from the two images and not just match the images. Yadics uses the whole image as a sampling grid: it is thus a total sampling. === Interpolator === It is possible to choose between bilinear interpolation and bicubic interpolation for the grey level evaluation at non integer coordinates. The bi-cubic interpolation is the recommended one. === Metrics === ==== Sum of squared differences (SSD) ==== The SSD is also known as mean squared error. The equation below defines the SSD metric: S S D ( μ , I F , I M ) = 1 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) 2 , {\displaystyle SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {1}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)^{2},} where I F {\displaystyle {\mathcal {I_{F}}}} is the fixed image, I M {\displaystyle {\mathcal {I_{M}}}} the moving one, Ω F {\displaystyle \Omega _{F}} the integration area | Ω F | {\displaystyle \left|\Omega _{F}\right|} the number of pi(vo)xels (cardinal) and T μ {\displaystyle {T}_{\mu }} the transformation parametrized by μ The transformation can be written as: T μ ( x ) = x + { Φ ( x ) } t { μ } . {\displaystyle T_{\mu }(x)=x+\left\{\Phi (x)\right\}^{t}\left\{\mu \right\}.} This metric is the main one used in the YaDICs as it works well with same modality images. One has to find the minimum of this metric ==== Normalized cross-correlation ==== The normalized cross-correlation (NCC) is used when one cannot assure the optical flow conservation; it happens in case of change of lighting or if particles disappear from the scene can occur in particle images velocimetry (PIV). The NCC is defined by: N C C ( μ , I F , I M ) = ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) ( I M ( T μ ( x i ) ) − I M ¯ ) ∑ x i ∈ Ω F ( I F ( x i ) − I F ¯ ) 2 ∑ x i ∈ Ω F ( I M ( T μ ( x i ) ) − I M ¯ ) 2 , {\displaystyle NCC(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})={\dfrac {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)}{\sqrt {\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\overline {\mathcal {I_{F}}}}\right)^{2}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{M}}}({T}_{\mu }(x_{i}))-{\overline {\mathcal {I_{M}}}}\right)^{2}}}},} where I F ¯ {\displaystyle {\overline {\mathcal {I_{F}}}}} and I M ¯ {\displaystyle {\overline {\mathcal {I_{M}}}}} are the mean values of the fixed and mobile images. This metric is only used to find local translation in Yadics. This metric with translation transform can be solved using cross-correlation methods, which are non iterative and can be accelerated using Fast Fourier Transform . === Classification of transformations === There are three categories of parametrization: elastic, global and local transformation. The elastic transformations respect the partition of unity, there are no holes created or surfaces counted several times. This is commonly used in Image Registration by the use of B-Spline functions and in solid mechanics with finite element basis. The global transformations are defined on the whole picture using rigid body or affine transformation (which is equivalent to homogeneous strain transformation). More complex transformations can be defined such as mechanically based one. These transformations have been used for stress intensity factor identification by and for rod strain by. The local transformation can be considered as the same global transformation defined on several Zone Of Interest (ZOI) of the fixed image. ==== Global ==== Several global transforms have been implemented: Rigid and homogeneous (Tx,Ty,Rz in 2D; Tx,Ty,Tz,Rx,Ry,Rz,Exx,Eyy,Ezz,Eyz,Exz,Exy in 3D) Brazilian (Only in 2D), Dynamic Flexion, ==== Elastic ==== First-order quadrangular finite elements Q4P1 are used in Yadics. ===== Local ===== Every global transform can be used on a local mesh. === Optimization === The YaDICs optimization process follows a gradient descent scheme. The first step is to compute the gradient of the metric regarding the transform parameters ∂ S S D ( μ , I F , I M ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ∂ I M ( T μ ( x i ) ∂ μ = 2 | Ω F | ∑ x i ∈ Ω F ( I F ( x i ) − I M ( T μ ( x i ) ) ) ( ∂ T μ ( x i ) ∂ μ ) t ∂ I M ( T μ ( x i ) ) ∂ x {\displaystyle {\begin{array}{lcl}{\dfrac {\partial SSD(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right){\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i})}{\partial \mu }}\\&=&{\dfrac {2}{\left|\Omega _{F}\right|}}\sum _{x_{i}\in \Omega _{F}}\left({\mathcal {I_{F}}}(x_{i})-{\mathcal {I_{M}}}({T}_{\mu }(x_{i}))\right)\left({\dfrac {\partial {T}_{\mu }(x_{i})}{\partial \mu }}\right)^{t}{\dfrac {\partial {\mathcal {I_{M}}}({T}_{\mu }(x_{i}))}{\partial x}}\\\end{array}}} ==== Gradient method ==== Once the metric gradient has been computed, one has to find an optimization strategy The gradient method principle is explained below: μ k + 1 = μ k + α k d k {\displaystyle \mu _{k+1}=\mu _{k}+\alpha _{k}d_{k}} The gradient step can be constant or updated at every iteration. d k = − γ k ∂ C ( μ , I F , I M ) ∂ μ {\displaystyle d_{k}=-\gamma _{k}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}} , γ k {\displaystyle \gamma _{k}} allows one to choose between the following methods : γ k {\displaystyle \gamma _{k}} ⟹ {\displaystyle \Longrightarrow } steepest descent, γ k = [ ∂ C ( μ , I F , I M ) ∂ μ ∂ C ( μ , I F , I M ) ∂ μ t ] − 1 {\displaystyle \gamma _{k}=\left[{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}{\dfrac {\partial {\mathcal {C}}(\mu ,{\mathcal {I_{F}}},{\mathcal {I_{M}}})}{\partial \mu }}^{t}\right]^{-1}} ⟹ {\displaystyle \Longrightarrow } Gauss-Newto

  Read more →
• 

  Shape factor (image analysis and microscopy)

  Shape factors are dimensionless quantities used in image analysis and microscopy that numerically describe the shape of a particle, independent of its size. Shape factors are calculated from measured dimensions, such as diameter, chord lengths, area, perimeter, centroid, moments, etc. The dimensions of the particles are usually measured from two-dimensional cross-sections or projections, as in a microscope field, but shape factors also apply to three-dimensional objects. The particles could be the grains in a metallurgical or ceramic microstructure, or the microorganisms in a culture, for example. The dimensionless quantities often represent the degree of deviation from an ideal shape, such as a circle, sphere or equilateral polyhedron. Shape factors are often normalized, that is, the value ranges from zero to one. A shape factor equal to one usually represents an ideal case or maximum symmetry, such as a circle, sphere, square or cube. == Aspect ratio == The most common shape factor is the aspect ratio, a function of the largest diameter and the smallest diameter orthogonal to it: A R = d min d max {\displaystyle A_{R}={\frac {d_{\min }}{d_{\max }}}} The normalized aspect ratio varies from approaching zero for a very elongated particle, such as a grain in a cold-worked metal, to near unity for an equiaxed grain. The reciprocal of the right side of the above equation is also used, such that the AR varies from one to approaching infinity. == Circularity == Another very common shape factor is the circularity (or isoperimetric quotient), a function of the perimeter P and the area A: f circ = 4 π A P 2 {\displaystyle f_{\text{circ}}={\frac {4\pi A}{P^{2}}}} The circularity of a circle is 1, and much less than one for a starfish footprint. The reciprocal of the circularity equation is also used, such that fcirc varies from one for a circle to infinity. == Elongation shape factor == The less-common elongation shape factor is defined as the square root of the ratio of the two second moments in of the particle around its principal axes. f elong = i 2 i 1 {\displaystyle f_{\text{elong}}={\sqrt {\frac {i_{2}}{i_{1}}}}} == Compactness shape factor == The compactness shape factor is a function of the polar second moment in of a particle and a circle of equal area A. f comp = A 2 2 π i 1 2 + i 2 2 {\displaystyle f_{\text{comp}}={\frac {A^{2}}{2\pi {\sqrt {{i_{1}}^{2}+{i_{2}}^{2}}}}}} The fcomp of a circle is one, and much less than one for the cross-section of an I-beam. == Waviness shape factor == The waviness shape factor of the perimeter is a function of the convex portion Pcvx of the perimeter to the total. f wav = P cvx P {\displaystyle f_{\text{wav}}={\frac {P_{\text{cvx}}}{P}}} Some properties of metals and ceramics, such as fracture toughness, have been linked to grain shapes. == An application of shape factors == Greenland, the largest island in the world, has an area of 2,166,086 km2; a coastline (perimeter) of 39,330 km; a north–south length of 2670 km; and an east–west length of 1290 km. The aspect ratio of Greenland is A R = 1290 2670 = 0.483 {\displaystyle A_{R}={\frac {1290}{2670}}=0.483} The circularity of Greenland is f circ = 4 π ( 2166086 ) 39330 2 = 0.0176. {\displaystyle f_{\text{circ}}={\frac {4\pi (2166086)}{39330^{2}}}=0.0176.} The aspect ratio is agreeable with an eyeball-estimate on a globe. Such an estimate on a typical flat map, using the Mercator projection, would be less accurate due to the distorted scale at high latitudes. The circularity is deceptively low, due to the fjords that give Greenland a very jagged coastline (see the coastline paradox). A low value of circularity does not necessarily indicate a lack of symmetry, and shape factors are not limited to microscopic objects.

  Read more →
• 

  The Triple Revolution

  "The Triple Revolution" was an open memorandum sent to U.S. President Lyndon B. Johnson and other government figures on March 22, 1964. It concerned three megatrends of the time: increasing use of automation, the nuclear arms race, and advancements in human rights. Drafted under the auspices of the Center for the Study of Democratic Institutions, it was signed by an array of noted social activists, professors, and technologists who identified themselves as the Ad Hoc Committee on the Triple Revolution. The chief initiator of the proposal was W. H. "Ping" Ferry, at that time a vice-president of CSDI, basing it in large part on the ideas of the futurist Robert Theobald. == Overview == The statement identified three revolutions underway in the world: the cybernation revolution of increasing automation; the weaponry revolution of mutually assured destruction; and the human rights revolution. It discussed primarily the cybernation revolution. The committee claimed that machines would usher in "a system of almost unlimited productive capacity" while continually reducing the number of manual laborers needed, and increasing the skill needed to work, thereby producing increasing levels of unemployment. It proposed that the government should ease this transformation through large-scale public works, low-cost housing, public transit, electrical power development, income redistribution, union representation for the unemployed, and government restraint on technology deployment. == Legacy == Martin Luther King Jr.'s final Sunday sermon, delivered six days before his April 1968 assassination, explicitly references the thesis of "The Triple Revolution": There can be no gainsaying of the fact that a great revolution is taking place in the world today. In a sense it is a triple revolution: that is, a technological revolution, with the impact of automation and cybernation; then there is a revolution in weaponry, with the emergence of atomic and nuclear weapons of warfare; then there is a human rights revolution, with the freedom explosion that is taking place all over the world. Yes, we do live in a period where changes are taking place. And there is still the voice crying through the vista of time saying, "Behold, I make all things new; former things are passed away." In Harlan Ellison's 1967 anthology Dangerous Visions, Philip José Farmer's story "Riders of the Purple Wage" uses the Triple Revolution document as the premise of a future society, in which the "purple wage" of the title is a guaranteed income dole on which most of the population lives. At the 1968 World Science Fiction Convention in San Francisco, Farmer delivered a lengthy Guest of Honor speech in which he called for the founding of a grassroots activist organization called REAP which would work for implementation of the Ad Hoc Committee's recommendations. Looking back on the proposal in his 2008 book, Daniel Bell wrote: "the cybernetic revolution quickly proved to be illusory. There were no spectacular jumps in productivity. ... Cybernation had proved to be one more instance of the penchant for overdramatizing a momentary innovation and blowing it up far out of proportion to its actuality. ... The image of a completely automated production economy—with an endless capacity to turn out goods—was simply a social-science fiction of the early 1960s. Paradoxically, the vision of Utopia was suddenly replaced by the spectre of Doomsday. In place of the early-sixties theme of endless plenty, the picture by the end of the decade was one of a fragile planet of limited resources whose finite stocks were being rapidly depleted, and whose wastes from soaring industrial production were polluting the air and waters." In his 2015 book Rise of the Robots, Martin Ford claims The Triple Revolution's predictions of steady decline in future employment were not wrong, but rather premature. He cites "Seven Deadly Trends" that began in the 1970s-1980s and by the mid-2010s appeared set to continue: Stagnation in real wages Decline in labor's share of national income in many countries (breakdown of Bowley's law), while corporate profits increased Declining labor force participation Diminishing job creation, lengthening jobless recoveries, and soaring long-term unemployment Rising inequality Declining incomes, and underemployment for recent college graduates Polarization and part-time jobs (middle-class jobs are disappearing, to be replaced by a small number of high-paying jobs and large number of low-paying jobs) According to Ford, the 1960s were part of what in retrospect seems like a golden age for labor in the United States, when productivity and wages rose together in near lockstep, and unemployment was low. But after about 1980, wages began stagnating while productivity continued to rise. Labor's share of the economic output began to decline. Ford describes the role that automation and information technology play in these trends, and how new technologies including narrow AI threaten to destroy jobs faster than displaced workers can be retrained for new jobs, before automation takes the new jobs as well. This includes many job categories, such as in transportation, that were never threatened by automation before. According to a 2013 study, about 47% of US jobs are susceptible to automation. == Signatories ==

  Read more →
• 

  Feed forward (control)

  A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward

  Read more →
• 

  Automaton

  An automaton ( ; pl.: automata or automatons) is a relatively self-operating machine or control mechanism designed to automatically follow a sequence of operations or respond to predetermined instructions. Some automata, such as bellstrikers in mechanical clocks, are designed to give the illusion to the casual observer that they are operating under their own power or will, like a mechanical robot. The term has long been commonly associated with automated puppets that resemble moving humans or animals, built to impress and/or to entertain people. Animatronics are a modern type of automata with electronics, often used for the portrayal of characters or creatures in films and in theme park attractions. == Etymology == The word automaton is the latinization of the Ancient Greek automaton (αὐτόματον), which means "acting of one's own will". It was first used by Homer to describe an automatic door opening, or automatic movement of wheeled tripods. It is more often used to describe non-electronic moving machines, especially those that have been made to resemble human or animal actions, such as the jacks on old public striking clocks, or the cuckoo and any other animated figures on a cuckoo clock. == History == === Ancient === There are many examples of automata in Greek mythology: Hephaestus created automata for his workshop; Talos was an artificial man of bronze; King Alkinous of the Phaiakians employed gold and silver watchdogs. According to Aristotle, Daedalus used quicksilver to make his wooden statue of Aphrodite move. In other Greek legends he used quicksilver to install voice in his moving statues. The automata in the Hellenistic world were intended as tools, toys, religious spectacles, or prototypes for demonstrating basic scientific principles. Numerous water-powered automata were built by Ktesibios, a Greek inventor and the first head of the Great Library of Alexandria; for example, he "used water to sound a whistle and make a model owl move. He had invented the world's first 'cuckoo clock'". This tradition continued in Alexandria with inventors such as the Greek mathematician Hero of Alexandria (sometimes known as Heron), whose writings on hydraulics, pneumatics, and mechanics described siphons, a fire engine, a water organ, the aeolipile, and a programmable cart. Philo of Byzantium was famous for his inventions. Complex mechanical devices are known to have existed in Hellenistic Greece, though the only surviving example is the Antikythera mechanism, the earliest known analog computer. The clockwork is thought to have come originally from Rhodes, where there was apparently a tradition of mechanical engineering; the island was renowned for its automata; to quote Pindar's seventh Olympic Ode: The animated figures stand Adorning every public street And seem to breathe in stone, or move their marble feet. However, the information gleaned from recent scans of the fragments indicate that it may have come from the colonies of Corinth in Sicily and implies a connection with Archimedes. According to Jewish legend, King Solomon used his wisdom to design a throne with mechanical animals which hailed him as king when he ascended it; upon sitting down an eagle would place a crown upon his head, and a dove would bring him a Torah scroll. It is also said that when King Solomon stepped upon the throne, a mechanism was set in motion. As soon as he stepped upon the first step, a golden ox and a golden lion each stretched out one foot to support him and help him rise to the next step. On each side, the animals helped the King up until he was comfortably seated upon the throne. In ancient China, a curious account of automata is found in the Lie Zi text, believed to have originated around 400 BCE and compiled around the fourth century CE. Within it there is a description of a much earlier encounter between King Mu of Zhou (1023–957 BCE) and a mechanical engineer known as Yan Shi, an 'artificer'. The latter proudly presented the king with a very realistic and detailed life-size, human-shaped figure of his mechanical handiwork: The king stared at the figure in astonishment. It walked with rapid strides, moving its head up and down, so that anyone would have taken it for a live human being. The artificer touched its chin, and it began singing, perfectly in tune. He touched its hand, and it began posturing, keeping perfect time...As the performance was drawing to an end, the robot winked its eye and made advances to the ladies in attendance, whereupon the king became incensed and would have had Yen Shih [Yan Shi] executed on the spot had not the latter, in mortal fear, instantly taken the robot to pieces to let him see what it really was. And, indeed, it turned out to be only a construction of leather, wood, glue and lacquer, variously coloured white, black, red and blue. Examining it closely, the king found all the internal organs complete—liver, gall, heart, lungs, spleen, kidneys, stomach and intestines; and over these again, muscles, bones and limbs with their joints, skin, teeth and hair, all of them artificial...The king tried the effect of taking away the heart, and found that the mouth could no longer speak; he took away the liver and the eyes could no longer see; he took away the kidneys and the legs lost their power of locomotion. The king was delighted. Other notable examples of automata include Archytas' dove, mentioned by Aulus Gellius. Similar Chinese accounts of flying automata are written of the 5th century BC Mohist philosopher Mozi and his contemporary Lu Ban, who made artificial wooden birds (ma yuan) that could successfully fly according to the Han Fei Zi and other texts. === Medieval === The manufacturing tradition of automata continued in the Greek world well into the Middle Ages. On his visit to Constantinople in 949 ambassador Liutprand of Cremona described automata in the emperor Theophilos' palace, including "lions, made either of bronze or wood covered with gold, which struck the ground with their tails and roared with open mouth and quivering tongue," "a tree of gilded bronze, its branches filled with birds, likewise made of bronze gilded over, and these emitted cries appropriate to their species" and "the emperor's throne" itself, which "was made in such a cunning manner that at one moment it was down on the ground, while at another it rose higher and was to be seen up in the air." Similar automata in the throne room (singing birds, roaring and moving lions) were described by Luitprand's contemporary the Byzantine emperor Constantine Porphyrogenitus, in his book De Ceremoniis (Perì tês Basileíou Tákseōs). In the mid-8th century, the first wind powered automata were built: "statues that turned with the wind over the domes of the four gates and the palace complex of the Round City of Baghdad". The "public spectacle of wind-powered statues had its private counterpart in the 'Abbasid palaces where automata of various types were predominantly displayed." Also in the 8th century, the Muslim alchemist, Jābir ibn Hayyān (Geber), included recipes for constructing artificial snakes, scorpions, and humans that would be subject to their creator's control in his coded Book of Stones. In 827, Abbasid caliph al-Ma'mun had a silver and golden tree in his palace in Baghdad, which had the features of an automatic machine. There were metal birds that sang automatically on the swinging branches of this tree built by Muslim inventors and engineers. The Abbasid caliph al-Muqtadir also had a silver and golden tree in his palace in Baghdad in 917, with birds on it flapping their wings and singing. In the 9th century, the Banū Mūsā brothers invented a programmable automatic flute player and which they described in their Book of Ingenious Devices. Al-Jazari described complex programmable humanoid automata amongst other machines he designed and constructed in the Book of Knowledge of Ingenious Mechanical Devices in 1206. His automaton was a boat with four automatic musicians that floated on a lake to entertain guests at royal drinking parties. His mechanism had a programmable drum machine with pegs (cams) that bump into little levers that operate the percussion. The drummer could be made to play different rhythms and drum patterns if the pegs were moved around. Al-Jazari constructed a hand washing automaton first employing the flush mechanism now used in modern toilets. It features a female automaton standing by a basin filled with water. When the user pulls the lever, the water drains and the automaton refills the basin. His "peacock fountain" was another more sophisticated hand washing device featuring humanoid automata as servants who offer soap and towels. Mark E. Rosheim describes it as follows: "Pulling a plug on the peacock's tail releases water out of the beak; as the dirty water from the basin fills the hollow base a float rises and actuates a linkage which makes a servant figure appear from behind a door under the peacock and offer soap.

  Read more →
• 

  Automation integrator

  An automation integrator is a systems integrator company or individual who makes different versions of automation hardware and software work together, generally combining several subsystems to work together as one large system. The title may refer to those who only integrate hardware, although these will often work with software integrators. Software created by automation integrators allows devices to communicate with each other, as well as collecting and reporting data. The magazine Control Engineering publishes an annual “Automation Integrator Guide” which lists over 2,000 automation integrators. They also give an annual system integrator of the year award to three automation integration firms. The Control System Integrators Association (CSIA) maintains a buyers' guide of over 1200 member and nonmember systems integrators known as the Industrial Automation Exchange, or CSIA Exchange for short. == Certification == The Control System Integrators Association (CSIA) certifies automation integrators, through an audit based on 79 critical criteria from the best practices manual. Companies must be associate members of the CSIA to be eligible for certification. Integrators can also receive certification through a program launched in 2012 by the Robotics Industries Association. == Industries == Automation Integrators work in a wide variety of industries which use robotics and automation. Some of the most common include:

  Read more →
• 

  Artificial psychology

  Artificial psychology (AP) has had multiple meanings dating back to 19th century, with recent usage related to artificial intelligence (AI).Artificial psychology is a theoretical field related to artificial intelligence, cognitive science, and psychology, which explores how advanced AI systems may develop human-like decision-making processes. In 1999, Zhiliang Wang and Lun Xie presented a theory of artificial psychology based on artificial intelligence. They analyze human psychology using information science research methods and artificial intelligence research to probe deeper into the human mind. == Main Theory == Dan Curtis (b. 1963) proposed AP is a theoretical discipline. The theory considers the situation when an artificial intelligence approaches the level of complexity where the intelligence meets two conditions: Condition I A: Makes all of its decisions autonomously B: Is capable of making decisions based on information that is New Abstract Incomplete C: The artificial intelligence is capable of reprogramming itself based on the new data, allowing it to evolve. D: And is capable of resolving its own programming conflicts, even in the presence of incomplete data. This means that the intelligence autonomously makes value-based decisions, referring to values that the intelligence has created for itself. Condition II All four criteria are met in situations that are not part of the original operating program When both conditions are met, then, according to this theory, the possibility exists that the intelligence will reach irrational conclusions based on real or created information. At this point, the criteria are met for intervention which will not necessarily be resolved by simple re-coding of processes due to extraordinarily complex nature of the codebase itself; but rather a discussion with the intelligence in a format which more closely resembles classical (human) psychology. If the intelligence cannot be reprogrammed by directly inputting new code, but requires the intelligence to reprogram itself through a process of analysis and decision based on information provided by a human, in order for it to overcome behavior which is inconsistent with the machines purpose or ability to function normally, then artificial psychology is by definition, what is required. The level of complexity that is required before these thresholds are met is currently a subject of extensive debate. The theory of artificial psychology does not address the specifics of what those levels may be, but only that the level is sufficiently complex that the intelligence cannot simply be recoded by a software developer, and therefore dysfunctionality must be addressed through the same processes that humans must go through to address their own dysfunctionalities. Along the same lines, artificial psychology does not address the question of whether or not the intelligence is conscious. As of 2022, the level of artificial intelligence does not approach any threshold where any of the theories or principles of artificial psychology can even be tested, and therefore, artificial psychology remains a largely theoretical discipline. Even at a theoretical level, artificial psychology remains an advanced stage of artificial intelligence.

  Read more →
• 

  Reference Software International

  Reference Software International, Inc. (RSI), was an American software developer active from 1985 to 1993 and based in Albuquerque, New Mexico, and San Francisco, California. The company released several productivity and reference software packages, including the Grammatik grammar checker, for MS-DOS. The company was acquired by WordPerfect Corporation in 1993. == History == === Background (1980–1985) === Reference Software International, Inc., was founded by Donald "Don" Emery and Bruce Wampler in 1985 in San Francisco, California. Both Wampler and Emery were college professors when they founded RSI: Wampler at the University of New Mexico as a professor of computer science and Emery a professor of marketing at San Francisco State University. After graduating from the University of Utah in around 1978, Wampler founded his first software company, Aspen Software, in Tijeras, New Mexico, in 1979. Wampler founded Aspen to develop an early spell checker software package, called Proofreader, for the TRS-80, licensing Random House's Webster's Unabridged Dictionary for the package's lexicon. In 1980, he began development on a grammar checker inspired by Writer's Workbench, a pioneering grammar checker for Unix systems. Wampler used Writer's Workbench heavily during the writer of his doctoral dissertation but disliked having to jump between the Apple II on which he composed the dissertation and the mainframe on which Writer's Workbench ran, and so wanted to develop a version of the latter for microcomputers. Wampler's work came to fruition as Grammatik in 1981, eventually ported to several other microcomputer platforms in the early 1980s. In 1983, by which point the company had 12 employees and sold a combined 80,000 units of Grammatik and Proofreader, Wampler sold Aspen to Dictronics, a software company best known for developing the Electronic Thesaurus, an early thesaurus program for microcomputers. Dictronics was in turn purchased by Wang Laboratories; according to Wampler, "Wang bought [Aspen] and sat on it. They did nothing with it". Wampler moved on to teach for the University of New Mexico, but, frustrated by Wang's inaction, got the urge to resurrect his work. In 1985, he was able to license back Grammatik and Proofreader from a small California-based software firm that had grandfathered rights to a forked version of both. In the same year, he met Emery, who, impressed by Wampler's, founded Reference Software International to market his software. RSI's research and development headquarters were based in Albuquerque, while the company's sales and marketing department was based in Walnut Creek, California. === Success (1985–1992) === In August 1985, RSI released their first product: the Random House Reference Set, a new version of Proofreader for the IBM Personal Computer and compatibles, revised to be a terminate-and-stay-resident program that ran atop other word processors such as WordStar or WordPerfect. At the time, Reference Set was the only such program on the market that functioned like this. RSI netted $114,000 from sales of Reference Set by the end of 1985. In June 1986, they released version 2.0 of Grammatik as Grammatik II for the PC. The latter was a breakout hit for RSI, receiving praise in the press (including technology journals such as PC Magazine) and RSI selling 1,000 units a month. In spring 1987, they released Reference Set II, which allowed users to import their own words into the built-in dictionary and added a thesaurus of 300,000 words. In November 1987, they released version 3.0 of Reference Set, which comprised two new field-specific dictionaries for the medical and legal professions. As well as the general Random House dictionary and thesaurus, it included Stedman's Medical Dictionary and Black's Law Dictionary. Emery consulted Paul Brest and Bob Jackson—professors of law at Stanford Law School and San Francisco State respectively—for the curation of the law dictionary; and Burton Grebin—at the time the executive director of Mount Saint Mary's Hospital—for the curation of the medical dictionary. In fall 1988, the company released Grammatik III, a total rewrite that made use of artificial intelligence to more accurately judge the grammar of sentences by breaking them down into a syntactic hierarchy. Grammatik III received universal acclaim, with Gloria Morris of InfoWorld calling it the apparent leader in the grammar checking field and Sandra Anderson of Mac Home Journal calling it "hands down ... the best of the industry" six years after its release. By 1989, the product had competitors in Correct Grammar by Lifetree Software and RightWriter by Rightsoft, Inc. By 1990, RSI achieved annual sales of $9.7 million. In the same year they released Grammatik IV, which was the first to offer direct integration with WordPerfect on both MS-DOS and Windows. In March 1992—by which point RSI had sold 1.5 million copies of Grammatik across all versions—the company released version 5 of the program, another rewrite that updated the lexicon further and added new functions such as word redundancy detection. Around the same time, the company introduced Easy Proof, a pared-down version of Grammatik intended for novice writers, students, and family computers. In 1991, the company was engaged in a trademark dispute with Systems Compatibility Corporation (SCC) of Chicago, Illinois, over the rights to the Software Toolkit title. Both companies had published software bundles bearing the name in the turn of the 1990s; SCC had published theirs first in 1988 and registered the trademark with the USPTO. SCC was granted a restraining order against RSI in January 1991. The following month, RSI agreed to rename their product, preventing a protracted legal battle. === Decline and acquisition (1992–1993) === By early 1992, RSI achieved annual sales of more than $13 million, employed 120 people, and had opened international offices in London, Belgium, and Antwerp to sell foreign versions of Reference Set and Grammatik. The company reached peak employment in the middle of 1992, with 140 employees. However, RSI's launch of six disparate titles in the year proved problematic for the company when they failed to sell as well as they had projected, and the company laid off employees by the dozens. By December 1992, only 71 employees were left, 32 from their San Francisco office. On the last day of 1992, RSI received an acquisition offer from WordPerfect Corporation, makers of the namesake word processor based in Orem, Utah. The deal was inked in January 1993, RSI's stakeholders receiving $19 million. The company's remaining employees were absorbed into WordPerfect in Orem. WordPerfect continued selling Grammatik as a standalone product for several years.

  Read more →
• 

  Prosthesis

  In medicine, a prosthesis (pl.: prostheses; from Ancient Greek: πρόσθεσις, romanized: prósthesis, lit. 'addition, application, attachment'), or a prosthetic implant, is an artificial device that replaces a missing body part, which may be lost through physical trauma, disease, or a condition present at birth (congenital disorder). Prostheses may restore the normal functions of the missing body part, or may perform a cosmetic function. A person who has undergone an amputation is sometimes referred to as an amputee, Rehabilitation for someone with an amputation is primarily coordinated by a physiatrist as part of an inter-disciplinary team consisting of physiatrists, prosthetists, nurses, physical therapists, and occupational therapists. Prostheses can be created by hand or with computer-aided design (CAD), a software interface that helps creators design and analyze the creation with computer-generated 2-D and 3-D graphics as well as analysis and optimization tools. == Types == A person's prosthetic device should be designed and assembled to meet their individual appearance and functional needs. Depending on personal circumstances, co-morbidities, budget or health insurance coverage, and access to medical care, decisions may need to balance aesthetics and function. In addition, for some individuals, a myoelectric device, a body-powered device, or an activity-specific device may be appropriate options. The person's future goals and vocational aspirations and potential capabilities may help them choose between one or more devices. Craniofacial prostheses include intra-oral and extra-oral prostheses. Extra-oral prostheses are further divided into hemifacial, auricular (ear), nasal, orbital and ocular. Intra-oral prostheses include dental prostheses, such as dentures, obturators, and dental implants. Prostheses of the neck include larynx substitutes, trachea and upper esophageal replacements, Some prostheses of the torso include breast prostheses which may be either single or bilateral, full breast devices or nipple prostheses. Penile prostheses are used to treat erectile dysfunction, perform phalloplasty procedures in men, and to build a new penis in female-to-male gender reassignment surgeries. === Limb prostheses === Limb prostheses include both upper- and lower-extremity prostheses. Upper-extremity prostheses are used at varying levels of amputation: forequarter, shoulder disarticulation, transhumeral prosthesis, elbow disarticulation, transradial prosthesis, wrist disarticulation, full hand, partial hand, finger, partial finger. A transradial prosthesis is an artificial limb that replaces an arm missing below the elbow. Upper limb prostheses can be categorized in three main categories: Passive devices, Body Powered devices, and Externally Powered (myoelectric) devices. Passive devices can either be passive hands, mainly used for cosmetic purposes, or passive tools, mainly used for specific activities (e.g. leisure or vocational). An extensive overview and classification of passive devices can be found in a literature review by Maat et.al. A passive device can be static, meaning the device has no movable parts, or it can be adjustable, meaning its configuration can be adjusted (e.g. adjustable hand opening). Despite the absence of active grasping, passive devices are very useful in bimanual tasks that require fixation or support of an object, or for gesticulation in social interaction. According to scientific data a third of the upper limb amputees worldwide use a passive prosthetic hand. Body Powered or cable-operated limbs work by attaching a harness and cable around the opposite shoulder of the damaged arm. A recent body-powered approach has explored the utilization of the user's breathing to power and control the prosthetic hand to help eliminate actuation cable and harness. The third category of available prosthetic devices comprises myoelectric arms. This particular class of devices distinguishes itself from the previous ones due to the inclusion of a battery system. This battery serves the dual purpose of providing energy for both actuation and sensing components. While actuation predominantly relies on motor or pneumatic systems, a variety of solutions have been explored for capturing muscle activity, including techniques such as Electromyography, Sonomyography, Myokinetic, and others. These methods function by detecting the minute electrical currents generated by contracted muscles during upper arm movement, typically employing electrodes or other suitable tools. Subsequently, these acquired signals are converted into gripping patterns or postures that the artificial hand will then execute. In the prosthetics industry, a trans-radial prosthetic arm is often referred to as a "BE" or below elbow prosthesis. Lower-extremity prostheses provide replacements at varying levels of amputation. These include hip disarticulation, transfemoral prosthesis, knee disarticulation, transtibial prosthesis, Syme's amputation, foot, partial foot, and toe. The two main subcategories of lower extremity prosthetic devices are trans-tibial (any amputation transecting the tibia bone or a congenital anomaly resulting in a tibial deficiency) and trans-femoral (any amputation transecting the femur bone or a congenital anomaly resulting in a femoral deficiency). A transfemoral prosthesis is an artificial limb that replaces a leg missing above the knee. Transfemoral amputees can have a very difficult time regaining normal movement. In general, a transfemoral amputee must use approximately 80% more energy to walk than a person with two whole legs. This is due to the complexities in movement associated with the knee. In newer and more improved designs, hydraulics, carbon fiber, mechanical linkages, motors, computer microprocessors, and innovative combinations of these technologies are employed to give more control to the user. In the prosthetics industry, a trans-femoral prosthetic leg is often referred to as an "AK" or above the knee prosthesis. A transtibial prosthesis is an artificial limb that replaces a leg missing below the knee. A transtibial amputee is usually able to regain normal movement more readily than someone with a transfemoral amputation, due in large part to retaining the knee, which allows for easier movement. Lower extremity prosthetics describe artificially replaced limbs located at the hip level or lower. In the prosthetics industry, a transtibial prosthetic leg is often referred to as a "BK" or below the knee prosthesis. Prostheses are manufactured and fit by clinical prosthetists. Prosthetists are healthcare professionals responsible for making, fitting, and adjusting prostheses and for lower limb prostheses will assess both gait and prosthetic alignment. Once a prosthesis has been fit and adjusted by a prosthetist, a rehabilitation physiotherapist (called physical therapist in America) will help teach a new prosthetic user to walk with a leg prosthesis. To do so, the physical therapist may provide verbal instructions and may also help guide the person using touch or tactile cues. This may be done in a clinic or home. There is some research suggesting that such training in the home may be more successful if the treatment includes the use of a treadmill. Using a treadmill, along with the physical therapy treatment, helps the person to experience many of the challenges of walking with a prosthesis. In the United Kingdom, 75% of lower limb amputations are performed due to inadequate circulation (dysvascularity). This condition is often associated with many other medical conditions (co-morbidities) including diabetes and heart disease that may make it a challenge to recover and use a prosthetic limb to regain mobility and independence. For people who have inadequate circulation and have lost a lower limb, there is insufficient evidence due to a lack of research, to inform them regarding their choice of prosthetic rehabilitation approaches. Lower extremity prostheses are often categorized by the level of amputation or after the name of a surgeon: Transfemoral (Above-knee) Transtibial (Below-knee) Ankle disarticulation (more commonly known as Syme's amputation) Knee disarticulation (also see knee replacement) Hip disarticulation, (also see hip replacement) Hemi-pelvictomy Partial foot amputations (Pirogoff, Talo-Navicular and Calcaneo-cuboid (Chopart), Tarso-metatarsal (Lisfranc), Trans-metatarsal, Metatarsal-phalangeal, Ray amputations, toe amputations). Van Nes rotationplasty ==== Prosthetic raw materials ==== Prosthetic are made lightweight for better convenience for the amputee. Some of these materials include: Plastics: Polyethylene Polypropylene Acrylics Polyurethane Wood (early prosthetics) Rubber (early prosthetics) Lightweight metals: Aluminum Composites: Carbon fiber reinforced polymers Wheeled prostheses have also been used extensively in the rehabilitation of injured domestic animals, including dogs, cats, pigs, rabbits, and

  Read more →