AI Avatar For Videos

AI Avatar For Videos — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Distributed manufacturing

Distributed manufacturing, also known as distributed production, cloud producing, distributed digital manufacturing, and local manufacturing, is a form of decentralized manufacturing practiced by enterprises using a network of geographically dispersed manufacturing facilities that are coordinated using information technology. It can also refer to local manufacture via the historic cottage industry model, or manufacturing that takes place in the homes of consumers. == Enterprise == In enterprise environments, the primary attribute of distributed manufacturing is the ability to create value at geographically dispersed locations. For example, shipping costs could be minimized when products are built geographically close to their intended markets. Also, products manufactured in a number of small facilities distributed over a wide area can be customized with details adapted to individual or regional tastes. Manufacturing components in different physical locations and then managing the supply chain to bring them together for final assembly of a product is also considered a form of distributed manufacturing. Digital networks combined with additive manufacturing allow companies a decentralized and geographically independent distributed production (cloud manufacturing). == Consumer == Within the maker movement and DIY culture, small scale production by consumers often using peer-to-peer resources is being referred to as distributed manufacturing. Consumers download digital designs from an open design repository website like Youmagine or Thingiverse and produce a product for low costs through a distributed network of 3D printing services such as 3D Hubs, Geomiq. In the most distributed form of distributed manufacturing the consumer becomes a prosumer and manufacturers products at home with an open-source 3-D printer such as the RepRap. In 2013 a desktop 3-D printer could be economically justified as a personal product fabricator and the number of free and open hardware designs were growing exponentially. Today there are millions of open hardware product designs at hundreds of repositories and there is some evidence consumers are 3-D printing to save money. For example, 2017 case studies probed the quality of: (1) six common complex toys; (2) Lego blocks; and (3) the customizability of open source board games and found that all filaments analyzed saved the prosumer over 75% of the cost of commercially available true alternative toys and over 90% for recyclebot filament. Overall, these results indicate a single 3D printing repository, MyMiniFactory, is saving consumers well over $60 million/year in offset purchases of only toys. These 3-D printers can now be used to make sophisticated high-value products like scientific instruments. Similarly, a study in 2022 found that 81% of open source designs provided economic savings and the total savings for the 3D printing community is more than $35 million from downloading only the top 100 products at YouMagine. In general, the savings are largest when compared to conventional products when prosumers use recycled materials in 'distributed recycling and additive manufacturing' (DRAM). == Emergency Distributed Manufacturing During COVID-19 Pandemic == Distributed manufacturing became far more visible during the COVID-19 pandemic because it offered a practical response to the breakdown of centralized global supply chains. As lock downs, border restrictions, and factory shutdowns disrupted conventional production, decentralized networks using local facilities such as Open Source Medical Supplies stepped in and manufactured over 48 million products. Additive manufacturing /3D printing were used to produce urgently needed items such as face shields, ventilators and their components, nasopharyngeal swabs, and other personal protective equipment. This demonstrated that distributed manufacturing could reduce lead times, improve responsiveness, and lessen dependence on distant suppliers during crisis conditions for a wide range of products. Peer-reviewed studies on pandemic-era manufacturing note that additive manufacturing was especially valuable because digital design files could be shared rapidly and produced close to the point of need, enabling hospitals, universities, small firms, and maker communities to supplement strained medical supply chains. The pandemic also helped shift distributed manufacturing from being seen as a niche or experimental model to a credible strategy for resilience, flexibility, and emergency response. At the same time, scholars caution that its wider adoption depends on solving issues related to quality assurance, regulation, material consistency, and coordination across distributed production sites. Overall, COVID-19 popularized distributed manufacturing by showing that localized, digitally enabled production could complement traditional manufacturing systems when speed, adaptability, and supply-chain resilience were critical. == Social change == Some call attention to the conjunction of commons-based peer production with distributed manufacturing techniques. The self-reinforced fantasy of a system of eternal growth can be overcome with the development of economies of scope, and here, the civil society can play an important role contributing to the raising of the whole productive structure to a higher plateau of more sustainable and customised productivity. Further, it is true that many issues, problems and threats rise due to the large democratization of the means of production, and especially regarding the physical ones. For instance, the recyclability of advanced nanomaterials is still questioned; weapons manufacturing could become easier; not to mention the implications on counterfeiting and on "intellectual property". It might be maintained that in contrast to the industrial paradigm whose competitive dynamics were about economies of scale, commons-based peer production and distributed manufacturing could develop economies of scope. While the advantages of scale rest on cheap global transportation, the economies of scope share infrastructure costs (intangible and tangible productive resources), taking advantage of the capabilities of the fabrication tools. And following Neil Gershenfeld in that "some of the least developed parts of the world need some of the most advanced technologies", commons-based peer production and distributed manufacturing may offer the necessary tools for thinking globally but act locally in response to certain problems and needs. As well as supporting individual personal manufacturing social and economic benefits are expected to result from the development of local production economies. In particular, the humanitarian and development sector are becoming increasingly interested in how distributed manufacturing can overcome the supply chain challenges of last mile distribution. Further, distributed manufacturing has been proposed as a key element in the Cosmopolitan localism or cosmolocalism framework to reconfigure production by prioritizing socio-ecological well-being over corporate profits, over-production and excess consumption. == Technology == By localizing manufacturing, distributed manufacturing may enable a balance between two opposite extreme qualities in technology development: Low technology and High tech. This balance is understood as an inclusive middle, a "mid-tech", that may go beyond the two polarities, incorporating them into a higher synthesis. Thus, in such an approach, low-tech and high-tech stop being mutually exclusive. They instead become a dialectic totality. Mid-tech may be abbreviated to "both…and…" instead of "neither…nor…". Mid-tech combines the efficiency and versatility of digital/automated technology with low-tech's potential for autonomy and resilience. == Contracting in Distributed Manufacturing == Research into contracting and order processing models tailored for distributed manufacturing has highlighted the need for flexible, role-based frameworks and advanced digital tools. These tools and frameworks are essential for addressing issues related to quality assurance, payment structures, legal compliance, and coordination among multiple actors. By addressing these challenges, contracting models for distributed manufacturing can unlock its potential for more localized, efficient, and sustainable production systems. A system prototype has been developed to simplify contracting for distributed manufacturing. This tool allows buyers to manage orders across multiple manufacturers using a single interface, automating workflows to ensure clarity and accountability for everyone involved. This research was led by the Internet of Production, as part of the mAkE project (African European Maker Innovation Ecosystem), funded by the European Horizon 2020 research and innovation programme.
Read more →
VideoThang

VideoThang was free video editing software for Windows 2000, XP, and Vista. The software has three parts to it which are My Stuff, Edit My Stuff, and My Mix. The software accepts MOV, AVI, MPG, MP4, PNG, WMV, FLV, and MP3 standards. Its official website is now no longer available. == Reception == Jan Ozer, of Pcmag, said that the software "suffers from several unfortunate design and implementation flaws that dramatically limit output quality and overall utility." Jon L. Jacobi, of PC World, said that the software "may not be the most flexible multimedia editor in the world, but the trim/zoom basics are there, it's free, and it's so simple to use that just about anyone in the world should be able figure it out." Amit Agarwal, of Digital Inspiration, said that the software "doesn’t offer loads of features like other video editors but is perfect for making quick video slideshows of your pictures that you can upload on the web or share via email."
Read more →
Pixel binning

Pixel binning, also known as binning, is a process image sensors of digital cameras use to combine adjacent pixels throughout an image, by summing or averaging their values, during or after readout. It improves low-light performance while still allowing for highly detailed photographs in good light. Charge from adjacent pixels in CCD or charge-coupled device image sensors and some other image sensors can be combined during readout, increasing the line rate or frame rate. In the context of image processing, binning is the procedure of combining clusters of adjacent pixels, throughout an image, into single pixels. For example, in 2×2 binning, an array of 4 pixels becomes a single larger pixel, reducing the number of pixels to 1/4 and halving the image resolution in each dimension. The result can be the sum, average, median, minimum, or maximum value of the cluster. Some systems use more advanced algorithms such as considering the values of nearby pixels, edge detection, self-claimed "AI", etc. to increase the perceived visual quality of the final downsized image. This aggregation, although associated with loss of information, reduces the amount of data to be processed, facilitating analysis. The binned image has lower resolution, but the relative noise level in each pixel is generally reduced. == History == Normally, an increase in megapixel count on a constant image sensor size would lead to a sacrifice of the surface size of the individual pixels, which would result in each pixel being able to catch less light in the same time, thus leading to a darker and/or noisier image in low light (given the same exposure time). In the past, camera manufacturers had to compromise between low-light performance and the amount of detail in good light, by dropping the megapixel count like HTC did in 2013 with their four-megapixel "UltraPixel" camera. However, this results in less detailed images in daylight where enough light is available. With pixel binning, the camera has "the best of both worlds", meaning both the benefit of high detail in good light and the benefit of high brightness in low light. In low light, the surfaces of four or more pixels can act as one large pixel that catches far more light. For example, some smartphones such as the Samsung Galaxy A15 are able to capture photographs with up to fifty megapixels in daylight. However, in low light, the individual pixels would be too small to capture the light needed for a bright image with the short exposure time available for handheld shooting. Therefore, with pixel binning activated, the 50-megapixel image sensor acts as a 12.5-megapixel image sensor, a quarter of its original resolution, with an accordingly larger surface area per pixel.
Read more →
Colors!

Colors! is a series of digital painting applications for handheld game consoles and mobile devices. Originally created as a homebrew application for Nintendo DS (as Colors!), which was since legitimately distributed on PlayStation Vita, iOS, and Android, the project eventually evolved into an officially licensed application for Nintendo 3DS (as Colors! 3D) and Nintendo Switch (as Colors Live). == History == === Colors! === Colors! was originally released in June 2007 as a simple homebrew painting application for the Nintendo DS. It was developed by Jens Andersson, a programmer and designer on sabbatical from the games industry who wanted to experiment with the potential of the new handheld platform. Shortly after, Rafał Piasek created an online gallery where users could upload paintings made with the program. Colors! quickly became one of the best-known homebrew applications on the Nintendo DS, and in September 2008, it was also released for the iPhone and iPod Touch. As of August 2010, it had been downloaded almost half a million times. It was voted the most popular homebrew application on the Nintendo DS by readers of the R4 for DS blog. Development of Colors! DS homebrew officially ended in December 2010 although the official gallery still accepted submissions from DS users until 2020 when Colors! Gallery was discontinued. === Colors! 3D === Colors! 3D is a successor to the application Colors! for the Nintendo 3DS. It was released as an officially licensed application for the Nintendo eShop in North America on April 5, 2012, and in the PAL region on April 19, 2012. It was later released in Japan on August 21, 2013, published by Arc System Works. Colors! 3D allows users to draw on five layers, each on their own stereoscopic 3D plane. Drawing is done on the bottom screen, while the top screen displays the painting in 3D. While drawing, players can use the various controls on the Nintendo 3DS to change layers, zoom and pan, and alter the pressure of their brush. Pressing the L button allows users to access a menu to change brush type, size, and opacity, modify the layers, use the camera to provide references, and more. When the user finishes their painting, they can export it to the SD card for viewing in the Nintendo 3DS Camera application. Users can also upload their finished creations to an online gallery, viewed on the 3DS or the official website. Gallery features include hashtags and the ability to follow artists and post comments. Each painting also features a replay feature that allows viewers to see how it was drawn. The application also features local multiplayer, allowing several people to work cooperatively on a painting. In April 2024, the developers of Colors! 3D collaborated with the Pretendo Network project to officially add support for the application, meaning Colors! 3D will continue to operate as normal when using Pretendo Network. ==== Reception ==== IGN gave the application a score of 9.0 and an Editor's Choice award, praising its simple interface and tutorials. Destructoid gave the app a 9.0, calling it "a simple and incredibly fun tool with an amazing community of artists proudly displaying their beautiful and funny 3D images." Nintendo Life gave the app a 9/10, stating, "Though lacking in any structured play, Colors! 3D’s robust free drawing system and unique ability to let anyone create their own three-dimensional artwork more than make up for this." === Colors Live === A Nintendo Switch successor called Colors Live (stylised as Colors L!ve) was released in 2020 after being funded via a Kickstarter campaign. This expanded upon the features of previous installments by adding new brushes, increasing the maximum number of layers to ten, and introducing blend modes. A new game mode called Colors Quest was also included. A pressure-sensitive pen called the Colors SonarPen was developed in collaboration with GreenBulb to facilitate drawing on the Nintendo Switch, and comes pre-bundled with physical copies of the game. ==== Colors Quest ==== This new mode acts as a story-driven adventure wherein players are given a daily drawing challenge with a specific theme and certain stipulations that must be fulfilled. Once the drawing is complete, players must anonymously score other players' submissions, these scores are then aggregated to produce a personal ranking that measures the improvement in the player's art skills over time.
Read more →
Product-family engineering

Product-family engineering (PFE), also known as product-line engineering (PLE), is based on the ideas of "domain engineering" created by the Software Engineering Institute, a term coined by James Neighbors in his 1980 dissertation at University of California, Irvine. Software product lines are quite common in our daily lives, but before a product family can be successfully established, an extensive process has to be followed. This process is known as product-family engineering. Product-family engineering can be defined as a method that creates an underlying architecture of an organization's product platform. It provides an architecture that is based on commonality as well as planned variabilities. The various product variants can be derived from the basic product family, which creates the opportunity to reuse and differentiate on products in the family. Product-family engineering is conceptually similar to the widespread use of vehicle platforms in the automotive industry. Product-family engineering is a relatively new approach to the creation of new products, recently evolving to Model-Based Product Line Engineering (MBPLE), emphasizing the centrality of a model-centric approach in PLE. It focuses on the process of engineering new products in such a way that it is possible to reuse product components and apply variability with decreased costs and time. Product-family engineering is all about reusing components and structures as much as possible, according to the ISO/IEC 26550/2015 and the latest ISO/IEC 26580/2021 that introduced the concept of feature-based Product Line Engineering. Several studies have proven that using a product-family engineering approach for product development can have several benefits. Here is a list of some of them: Higher productivity Higher quality Faster time-to-market Lower labor needs The Nokia case mentioned below also illustrates these benefits. In 2025 the publishing of the book Model-Based Product Line Engineering (MBPLE): The feature-based path to product lines success by Marco Forlingieri, Tim Weilkiens and Hugo Guillermo Chalé-Gongora formalized the foundation of the discipline, including best practices and new industrial cases. == Overall process == The product family engineering process consists of several phases. The three main phases are: Phase 1: Product management Phase 2: Domain engineering Phase 3: Product engineering The process has been modeled on a higher abstraction level. This has the advantage that it can be applied to all kinds of product lines and families, not only software. The model can be applied to any product family. Figure 1 (below) shows a model of the entire process. Below, the process is described in detail. The process description contains elaborations of the activities and the important concepts being used. All concepts printed in italic are explained in Table 1. === Phase 1: product management === The first phase is the starting up of the whole process. In this phase some important aspects are defined especially with regard to economic aspects. This phase is responsible for outlining market strategies and defining a scope, which tells what should and should not be inside the product family. ==== Evaluate business visioning ==== During this first activity all context information relevant for defining the scope of the product line is collected and evaluated. It is important to define a clear market strategy and take external market information into account, such as consumer demands. The activity should deliver a context document that contains guidelines, constraints and the product strategy. ==== Define product line scope ==== Scoping techniques are applied to define which aspects are within the scope. This is based upon the previous step in the process, where external factors have been taken into account. The output is a product portfolio description, which includes a list of current and future products and also a product roadmap. It can be argued whether phase 1, product management, is part of the product-family-engineering process, because it could be seen as an individual business process that is more focused on the management aspects instead of the product aspect. However phase 2 needs some important input from this phase, as a large piece of the scope is defined in this phase. So from this point of view it is important to include the product-management phase (phase 1) into the entire process as a base for the domain-engineering process. === Phase 2: domain engineering === During the domain-engineering phases, the variable and common requirements are gathered for the whole product line. The goal is to establish a reusable platform. The output of this phase is a set of common and variable requirements for all products in the product line. ==== Analyze domain requirements ==== This activity includes all activities for analyzing the domain with regard to concept requirements. The requirements are categorized and split up into two new activities. The output is a document with the domain analysis. As can be seen in Figure 1 the process of defining common requirements is a parallel process with defining variable requirements. Both activities take place at the same time. ==== Define common requirements ==== Includes all activities for eliciting and documenting the common requirements of the product line, resulting in a document with reusable common requirements. ==== Define variable requirements ==== Includes all activities for eliciting and documenting the variable requirements of the product line, resulting in a document with variable requirements. ==== Design domain ==== This process step consists of activities for defining the reference architecture of the product line. This generates an abstract structure for all products in the product line. ==== Implement domain ==== During this step a detailed design of the reusable components and the implementation of these components are created. ==== Test domain ==== Validates and verifies the reusability of components. Components are tested against their specifications. After successful testing of all components in different use cases and scenarios, the domain engineering phase has been completed. === Phase 3: product engineering === In the final phase a product X is being engineered. This product X uses the commonalities and variability from the domain engineering phase, so product X is being derived from the platform established in the domain engineering phase. It basically takes all common requirements and similarities from the preceding phase plus its own variable requirements. Using the base from the domain engineering phase and the individual requirements of the product engineering phase a complete and new product can be built. After the product has been fully tested and approved, the product X can be delivered. ==== Define product requirements ==== Developing the product requirements specification for the individual product and reuse the requirements from the preceding phase. ==== Design product ==== All activities for producing the product architecture. Makes use of the reference architecture from the step "design domain", it selects and configures the required parts of the reference architecture and incorporates product specific adaptations. ==== Build product ==== During this process the product is built, using selections and configurations of the reusable components. ==== Test product ==== During this step the product is verified and validated against its specifications. A test report gives information about all tests that were carried out, this gives an overview of possible errors in the product. If the product in the next step is not accepted, the process will loop back to "build product", in Figure 1 this is indicated as "[unsatisfied]". ==== Deliver and support product ==== The final step is the acceptance of the final product. If it has been successfully tested and approved to be complete, it can be delivered. If the product does not satisfy to the specifications, it has to be rebuilt and tested again. The next figure shows the overall process of product-family engineering as described above. It is a full process overview with all concepts attached to the different steps. == Process data diagram == On the left side the entire process from the top to bottom has been drawn. All activities on the left side are linked to the concepts on the right side through dotted lines. Every concept has a number, which reflects the association with other concepts. == List of concepts == Below the list with concepts will be explained. Most concept definitions are extracted from Pohl, Bockle, & Linden (2005) and also some new definitions have been added. Table 1: List of concepts == Example == There are some good examples of the use of product family engineering, which were quite successful. The abstract model of product family engineering allows different kinds of uses, most of them are related to the consumer electronics m
Read more →
Auto-defrost

Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.
Read more →
Conference app

A conference app, also known as an event app or meeting app, is a mobile app developed to help attendees and meeting planners manage their conference experience. It typically includes conference proceedings and venue information, allowing users to create personalized schedules and engage with other users. A conference app can be a native app or web-based. In recent years, conference apps have gained in popularity as a sustainable solution for event management by reducing paper produced by printed materials. Advanced features often include real-time notifications for updates or changes, integration with virtual meeting platforms for hybrid or fully online events, and analytics tools for organizers to measure attendance and engagement. Additionally, some apps support sponsorship and exhibitor features, enabling businesses to showcase their products or services directly within the app.
Read more →
Uniphore

Uniphore is an American software company that develops artificial intelligence platforms for business use. The company is headquartered in Palo Alto, California, with offices in the United States, United Kingdom, Spain, Israel, United Arab Emirates, and India. Uniphore is known for its "Business AI Cloud," an enterprise AI platform that combines data, knowledge, models, and software agents for use in sales, marketing, and service. The company has also acquired firms in video emotion AI, AI agents, low-code automation, knowledge automation, voice and screen capture, customer data platforms, and data engineering. == History == Uniphore Software Systems was founded by Umesh Sachdev and Ravi Saraogi in 2008 and was incubated at IIT Madras. The company received an initial grant of $100,000 from the National Research Development Corporation. Early work focused on speech technologies for emerging markets. Uniphore partnered with companies that specialized in English and European languages, and adapting the technology for Indian languages and dialects. In 2014, Uniphore released its first flagship products, auMina, along with two other products, Akeira and amVoice. Uniphore raised series A funding, led by Kris Gopalakrishnan (cofounder of Infosys), in April 2015. The next month, Uniphore received additional investment from IDG Ventures. With input from its investors, Uniphore changed its business model from license fee-based income to a software as a service-based subscription fee model in 2015. By June 2016, it had added more than 70 global languages and expanded its services to Southeast Asia, the Middle East, and the United States. The company opened operations in Singapore in October 2016. The company raised Series B funding in October 2017, led by John Chambers and existing investors. Series C funding of $51 million was announced in August 2019 and led by March Capital. Uniphore acquired an exclusive third-party license for robotic process automation technology from NTT DATA in October 2020. In January 2021, Uniphore acquired Emotion Research Lab, a startup based in Spain that uses artificial intelligence and machine learning to analyze video and interpret emotions. The company received $140 million in Series D funding, led by Sorenson Capital Partners, in March 2021, bringing total funding to $210 million. In January 2021, Uniphore acquired Emotion Research Lab. In July 2021, it agreed to acquire Jacada, a provider of low-code/no-code automation; the transaction closed in October 2021. On February 16, 2022, Uniphore announced a $400 million Series E financing led by NEA, which valued the company at $2.5 billion. Hilarie Koplow-McAdams, an NEA venture partner and former Salesforce/New Relic executive, joined Uniphore's board in 2022. Uniphore's board has also included former Cisco CEO John Chambers, former Convergys CEO Andrea J. Ayers, and CrowdStrike CFO Burt Podbere (appointed January 2021). In February 2023, Uniphore acquired UK-based Red Box, a platform for capturing voice and screen recordings used in regulated and large-scale environments. It also acquired France-based Hexagone, a behavioral analytics firm combining computer vision and natural-language techniques. On December 5, 2024, Uniphore announced agreements to acquire ActionIQ, a customer data platform (CDP) vendor, and Infoworks, an enterprise data engineering platform. Uniphore launched the Business AI Cloud on June 9, 2025. The Business AI Cloud consists of a single, unified platform that includes data, knowledge, AI models, and AI agents. Uniphore announced in August 2025 that it had acquired Orby AI and intended to acquire Autonom8 to extend multi-agent and workflow automation capabilities. As of September 2025, Uniphore's customers included the United States Coast Guard, Singapore Police Force, London Underground, DirecTV, JPMorgan Chase, LG, DHL, UPS, Vodafone, Verizon, NTT Data, and as of May 2021, Firstsource. In October 2025, Uniphore raised $260 million in a Series F round at a reported valuation of $2.5 billion. Investors included March Capital, NEA, Nvidia, AMD, Snowflake, and Databricks. In January 2026, KPMG and Uniphore announced a collaboration focused on deploying AI agents powered by specialized small language models. The announcement was made at the World Economic Forum held in Davos. Cognizant and Uniphore announced a partnership in February 2026 to develop industry-specific AI tools for regulated sectors, which would initially focus on life sciences and finance. Uniphore and Rackspace also announced a partnership in March 2026. This partnership was announced in order to create an "Infrastructure-to-Agents" architecture, focusing on Business AI as a private cloud service. == Products == As of 2025, Uniphore's core offering is the Business AI Cloud and Business AI Suite of agentic AI applications. === Business AI Cloud === Uniphore’s Business AI Cloud is a full-stack platform that organizes enterprise data and knowledge for agentic AI applications. The platform enables deployment across clouds and existing data sources. Key layers and capabilities include the following. Agentic layer: Includes prebuilt agents, a natural-language agent builder, and orchestration based on Business Process Model and Notation (BPMN) to run AI workflows across business units. Model layer: Supports an open, interoperable mix of closed and open-source large language models (LLMs). Models can be orchestrated, governed, and replaced as needed. Knowledge layer: Organizes raw data into structured knowledge used for retrieval, explainability, and fine-tuning of small language models (SLMs). Data layer: Connects to data across multiple platforms and clouds through a zero-copy, composable fabric, enabling in-place preparation and supporting data residency and sovereignty requirements. === Business AI Suite === The Uniphore Business AI Suite has various prebuilt AI agents that can be used in customer service, sales, marketing, and human resources. The Uniphore Business AI Suite includes several LOBs (Lines of Business) for business functions with intelligent agents that are prebuilt, but composable. Built on the Uniphore Business AI Cloud, each application combines agentic automation and fine-tuned models. Marketing AI, Customer Service AI, Sales AI, and People AI (for human resources) are included. Competitors include Palantir, Microsoft Azure, Amazon Bedrock, Google's Vertex AI, Databricks, and Snowflake. == Recognition == Deloitte Technology Fast 50 India identified Uniphore as the 17th fastest-growing technology company in India in 2012 and one of the top 500 fastest growing companies in the Asia-Pacific region in 2014. In 2016, Time included Sachdev on its list of "10 millennials who are changing the world" for “building a phone that can understand almost any language”. NASSCOM named Uniphore to its "League of 10" emerging Indian technology companies in 2017. In 2020, the San Francisco Business Times ranked Uniphore as No. 7 among small companies in its list of the best places to work in the San Francisco Bay Area. In 2022, the company was featured on the Forbes AI 50 list. Uniphore was mentioned in the Deloitte Technology Fast 500 list in 2023, 2024, and 2025. In 2025, Inc. included Uniphore in its Best in Business program.
Read more →
Lesk algorithm

The Lesk algorithm is a classical algorithm for word sense disambiguation introduced by Michael E. Lesk in 1986. It operates on the premise that words within a given context are likely to share a common meaning. This algorithm compares the dictionary definitions of an ambiguous word with the words in its surrounding context to determine the most appropriate sense. Variations, such as the Simplified Lesk algorithm, have demonstrated improved precision and efficiency. However, the Lesk algorithm has faced criticism for its sensitivity to definition wording and its reliance on brief glosses. Researchers have sought to enhance its accuracy by incorporating additional resources like thesauruses and syntactic models. == Overview == The Lesk algorithm is based on the assumption that words in a given "neighborhood" (section of text) will tend to share a common topic. A simplified version of the Lesk algorithm is to compare the dictionary definition of an ambiguous word with the terms contained in its neighborhood. Versions have been adapted to use WordNet. An implementation might look like this: for every sense of the word being disambiguated one should count the number of words that are in both the neighborhood of that word and in the dictionary definition of that sense the sense that is to be chosen is the sense that has the largest number of this count. A frequently used example illustrating this algorithm is for the context "pine cone". The following dictionary definitions are used: PINE 1. kinds of evergreen tree with needle-shaped leaves 2. waste away through sorrow or illness CONE 1. solid body which narrows to a point 2. something of this shape whether solid or hollow 3. fruit of certain evergreen trees As can be seen, the best intersection is Pine #1 ⋂ Cone #3 = 2. == Simplified Lesk algorithm == In Simplified Lesk algorithm, the correct meaning of each word in a given context is determined individually by locating the sense that overlaps the most between its dictionary definition and the given context. Rather than simultaneously determining the meanings of all words in a given context, this approach tackles each word individually, independent of the meaning of the other words occurring in the same context. "A comparative evaluation performed by Vasilescu et al. (2004) has shown that the simplified Lesk algorithm can significantly outperform the original definition of the algorithm, both in terms of precision and efficiency. By evaluating the disambiguation algorithms on the Senseval-2 English all words data, they measure a 58% precision using the simplified Lesk algorithm compared to the only 42% under the original algorithm. Note: Vasilescu et al. implementation considers a back-off strategy for words not covered by the algorithm, consisting of the most frequent sense defined in WordNet. This means that words for which all their possible meanings lead to zero overlap with current context or with other word definitions are by default assigned sense number one in WordNet." Simplified LESK Algorithm with smart default word sense (Vasilescu et al., 2004) The COMPUTEOVERLAP function returns the number of words in common between two sets, ignoring function words or other words on a stop list. The original Lesk algorithm defines the context in a more complex way. == Criticisms == Unfortunately, Lesk’s approach is very sensitive to the exact wording of definitions, so the absence of a certain word can radically change the results. Further, the algorithm determines overlaps only among the glosses of the senses being considered. This is a significant limitation in that dictionary glosses tend to be fairly short and do not provide sufficient vocabulary to relate fine-grained sense distinctions. A lot of work has appeared offering different modifications of this algorithm. These works use other resources for analysis (thesauruses, synonyms dictionaries or morphological and syntactic models): for instance, it may use such information as synonyms, different derivatives, or words from definitions of words from definitions. == Lesk variants == Original Lesk (Lesk, 1986) Adapted/Extended Lesk (Banerjee and Pederson, 2002/2003): In the adaptive lesk algorithm, a word vector is created corresponds to every content word in the wordnet gloss. Concatenating glosses of related concepts in WordNet can be used to augment this vector. The vector contains the co-occurrence counts of words co-occurring with w in a large corpus. Adding all the word vectors for all the content words in its gloss creates the Gloss vector g for a concept. Relatedness is determined by comparing the gloss vector using the Cosine similarity measure. There are a lot of studies concerning Lesk and its extensions: Wilks and Stevenson, 1998, 1999; Mahesh et al., 1997; Cowie et al., 1992; Yarowsky, 1992; Pook and Catlett, 1988; Kilgarriff and Rosensweig, 2000; Kwong, 2001; Nastase and Szpakowicz, 2001; Gelbukh and Sidorov, 2004.
Read more →
Video renderer

A video renderer is software that processes a video file and sends it sequentially to the video display controller card for display on a computer screen. An example of a video renderer, is the VMR-7 that was used by Microsoft's DirectShow. An example of a UNIX video renderer is the one container within GStreamer. Commonly used video renderers are: Enhanced Video Renderer VMR9 Renderless Haali's Video Renderer Madvr Video Renderer JRVR, a part of JRiver Media Center
Read more →
Autonomous things

Autonomous things, abbreviated AuT, or the Internet of autonomous things, abbreviated as IoAT, is an emerging term for the technological developments that are expected to bring computers into the physical environment as autonomous entities without human direction, freely moving and interacting with humans and other objects. Self-navigating drones are the first AuT technology in (limited) deployment. It is expected that the first mass-deployment of AuT technologies will be the autonomous car, generally expected to be available around 2020. Other currently expected AuT technologies include home robotics (e.g., machines that provide care for the elderly, infirm or young), and military robots (air, land or sea autonomous machines with information-collection or target-attack capabilities). AuT technologies share many common traits, which justify the common notation. They are all based on recent breakthroughs in the domains of (deep) machine learning and artificial intelligence. They all require extensive and prompt regulatory developments to specify the requirements from them and to license and manage their deployment (see the further reading below). And they all require unprecedented levels of safety (e.g., automobile safety) and security, to overcome concerns about the potential negative impact of the new technology. As an example, the autonomous car both addresses the main existing safety issues and creates new issues. It is expected to be much safer than existing vehicles, by eliminating the single most dangerous element – the driver. The US's National Highway Traffic Safety Administration estimates 94 percent of US accidents were the result of human error and poor decision-making, including speeding and impaired driving, and the Center for Internet and Society at Stanford Law School claims that "Some ninety percent of motor vehicle crashes are caused at least in part by human error". So while safety standards like the ISO 26262 specify the required safety, there is still a burden on the industry to demonstrate acceptable safety. While car accidents claim every year 35,000 lives in the US, and 1.25 million worldwide, some believe that even "a car that's 10 times as safe, which means 3,500 people die on the roads each year [in the US alone]" would not be accepted by the public. The acceptable level may be closer to the current figures on aviation accidents and incidents, with under a thousand worldwide deaths in most years – three orders of magnitude lower than cars. This underscores the unprecedented nature of the safety requirements that will need to be met for cars, with similar levels of safety expected for other Autonomous Things.
Read more →
Clips (software)

Clips is a discontinued mobile video editing software application created by Apple Inc. It was released onto the iOS App Store on April 6, 2017, for free. Initially, it was only available on 64-bit devices running iOS 10.3 or later; as of version 3.1.3, it requires iOS 16.0 or later. Apple describes it as an app for "making and sharing fun videos with text, effects, graphics, and more.". Its final release was on May 9, 2024 before was removed from the App Store on October 10, 2025. == Features == After launching of the app, the user sees the view of the front-facing camera. The app allows the user to create a new clip by tapping on a red record button, or use photos or videos from the device's photo library. Once a clip is recorded, it can be added to a project timeline shown at the bottom of the screen. The user can share their project on social media platforms. The user can also add filters and effects to the project. "Live Titles" (available in several styles) can also be created by dictating to the device.
Read more →
AI washing

AI washing is a deceptive marketing tactic that consists of promoting a product or a service by overstating the role of artificial intelligence (AI) and the integration of it. Companies often involve in the practice to mislead customers to boost their offerings, and to secure funding from investors. The practice raises concerns regarding transparency, and legal issues. == Definition == AI washing is a deceptive marketing practice. It involves promoting a product or a service by overstating the role of artificial intelligence (AI) and its integration in the design and manufacture of the same. The practice raises concerns regarding transparency, compliance with security regulations, and consumer trust in the AI industry potentially hampering legitimate advancements in AI. The term was first defined by the AI Now Institute, a research institute based at New York University in 2019. The term is derived from greenwashing, another deceptive marketing technique that misrepresents a product's environmental impact in a similar manner. AI washing might involve a company claiming to have used AI in the development or enhancement of its products or services without its actual involvement, or using buzzwords such as "smart" or "AI-powered" without the product actually offering it or making use of it. A company may overstate the usage of AI or misuse the term, which is also construed as AI washing. In 2026, The Washington Post defined AI washing as "a trend for bosses to blame layoffs on the productive capabilities of AI and its ability to replace workers, even when job cuts may have little to do with the technology". == Usage and effects == AI washing can lead to deception of customers and misleading of investors. It is also an illegal and unethical practice that lacks transparency regarding disclosing the details of a product or a service. Companies get involved in such a practice often in response to competition who might have used AI in their offerings. It might also be used as a ploy to secure funding and investment, assuming that it will attract them towards it. AI washing has been compared to dot-com bubble, when businesses appended "dot-com" to the end of the business name to boost their valuation. In September 2023, Coca-Cola released a new product called Coca-Cola Y3000, and the company stated that the Y3000 flavor had been "co-created with human and artificial intelligence". The company was accused of AI washing due to no proof of AI involvement in the creation of the product, and critics believed that AI was used as a way to grab consumer attention more than it was used in the actual product creation. In 2026, mass tech layoffs were attributed to AI washing from AI innovation instead of balance sheet restructuring. == Mitigation == Companies are expected to be transparent and clearer in communicating the usage of AI in their products or services. Consumers can mitigate the same by requesting for hard evidence from the companies regarding the usage of AI tools. Customers should evaluate the product or service as a whole rather than being swayed by the usage of AI. Informed decision making and purchasing can keep them from falling for such marketing gimmicks. The United States Securities and Exchange Commission (SEC) imposes penalties for companies indulging in such practices. In March 2024, the SEC imposed the first civil penalties on two companies for misleading statements about their use of AI, and in July 2024, it charged a corporate executive from a supposed AI hiring startup with fraud for the usage of buzzwords related to AI.
Read more →
Gapo

Gapo is a Vietnamese social networking service based in Hanoi, Vietnam. Users are able to create a personal profile and share text, photos and videos with others on the platform. Users can also use Gapo for live streaming, instant messaging, blogging, and online payments. Gapo was launched in July 2019 by Hà Trung Kiên and Duong Vi Khoa. == History == Gapo was founded in response to calls for Vietnam's Communist-led government to produce a domestic alternative to social media giants like Facebook and Google. Gapo officially launched on July 23, 2019 at an event in Hanoi. The company received 500 billion đồng (US$22 million) in funding from technology corporation G-Group to be utilized in the first phase of development. They also partnered with Sony Music Entertainment to provide music content to its services. == Features == Gapo features a news feed for posting content, livestreaming, instant messaging, and blogging. It also allows users to pay online and access public services. == Reception == Within two days of launch, Gapo received about 200,000 registrations. By September 2019, the user base increased to one million. Upon launch, Gapo experienced significant technical difficulties. Users complained about the inability to sign up for a new account and said that certain functions were not available for use at launch. This issue caused Gapo to temporarily suspend their services in order to perform upgrades and bug fixes. Gapo relaunched the next day, though many users reported that the access speed decreased. The mobile app also received mixed reviews from users in both the App Store and the Google Play Store, with an average rating of 3.1 and 3.5, respectively. Most users found the app to be a knockoff of Facebook, although some users praised the app for being locally developed. === Expert opinions on platform viability === Le Hong Hiep of the ISEAS - Yusof Ishak Institute was doubtful that a Vietnamese-owned social network service could be as powerful as a foreign-based service, stating that Vietnam might not be able to develop a viable social media network to compete with the likes of Facebook or Google. Others, like blogger Ann Chi, said that, due to local players complying with local censorship policy, there is a chance that locals might not trust Gapo and other local services in light of possible surveillance. Regarding the targeted user base figure for the end of 2019 and 2021, experts cautioned that the company might need an additional trillion đồng of funding to reach its planned user base targets. In response, the company stated that Gapo was never meant to compete with Facebook, but instead noted that the main difference between Gapo and Facebook is that Gapo provides a personalized user experience through customization. == Censorship == Gapo has the right to censor posts and news that are deemed offensive and inaccurate by users or not approved by the censorship curators.
Read more →
Shepp–Logan phantom

The Shepp–Logan phantom is a standard test image created by Larry Shepp and Benjamin F. Logan for their 1974 paper "The Fourier Reconstruction of a Head Section". It serves as the model of a human head in the development and testing of image reconstruction algorithms. == Definition == The function describing the phantom is defined as the sum of 10 ellipses inside a 2×2 square:
Read more →