AI Avatar For Videos

AI Avatar For Videos — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Control system

A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.
Read more →
AsoSoft text corpus

The AsoSoft text corpus is the first large-scale Kurdish text corpus, collected and processed by the AsoSoft research and development group. It contains 458,000 documents (188 million tokens) that are collected from sources such as websites, news agencies, books, and magazines. The corpus is partially tagged by topic, so it can be used for topic identification tasks. Also, it is applicable for extracting language model and computational lexicon information. Part of the corpus (75 million tokens) is available online for non-commercial use. The corpus uses the TEI format.
Read more →
Computational photography

Computational photography refers to digital image capture and processing techniques that use digital computation instead of optical processes. Computational photography can improve the capabilities of a camera, or introduce features that were not possible at all with film-based photography, or reduce the cost or size of camera elements. Examples of computational photography include in-camera computation of digital panoramas, high-dynamic-range images, and light field cameras. Light field cameras use novel optical elements to capture three-dimensional scene information, which can then be used to produce 3D images, enhanced depth-of-field, and selective de-focusing (or "post focus"). Enhanced depth-of-field reduces the need for mechanical focusing systems. All of these features use computational imaging techniques. The definition of computational photography has evolved to cover a number of subject areas in computer graphics, computer vision, and applied optics. These areas are given below, organized according to a taxonomy proposed by Shree K. Nayar. Within each area is a list of techniques, and for each technique, one or two representative papers or books are cited. Deliberately omitted from the taxonomy are image processing (see also digital image processing) techniques applied to traditionally captured images to produce better images. Examples of such techniques are image scaling, dynamic range compression (i.e. tone mapping), color management, image completion (a.k.a. inpainting or hole filling), image compression, digital watermarking, and artistic image effects. Also omitted are techniques that produce range data, volume data, 3D models, 4D light fields, 4D, 6D, or 8D BRDFs, or other high-dimensional image-based representations. Epsilon photography is a sub-field of computational photography. == Effect on photography == Photos taken using computational photography can allow amateurs to produce photographs rivalling the quality of professional photographers, but as of 2019 do not outperform the use of professional-level equipment. == Computational illumination == This is controlling photographic illumination in a structured fashion, then processing the captured images, to create new images. The applications include image-based relighting, image enhancement, image deblurring, geometry/material recovery and so forth. High-dynamic-range imaging uses differently exposed pictures of the same scene to extend dynamic range. Other examples include processing and merging differently illuminated images of the same subject matter ("lightspace"). == Computational optics == This is a capture of optically coded images, followed by computational decoding to produce new images. Coded aperture imaging was mainly applied in astronomy and X-ray imaging to boost the image quality. Instead of a single pin-hole, a pinhole pattern is applied in imaging, and deconvolution is performed to recover the image. In coded exposure imaging, the on/off state of the shutter is coded to modify the kernel of motion blur. In this way, motion deblurring becomes a well-conditioned problem. Similarly, in a lens based coded aperture, the aperture can be modified by inserting a broadband mask. Thus, out of focus deblurring becomes a well-conditioned problem. The coded aperture can also improve the quality in light field acquisition using Hadamard transform optics. Coded aperture patterns can also be designed using color filters, in order to apply different codes at different wavelengths. This allows for increase the amount of light that reaches the camera sensor, compared to binary masks. == Computational imaging == Computational imaging is a set of imaging techniques that combine data acquisition and data processing to create the image of an object through indirect means to yield enhanced resolution, additional information such as optical phase or 3D reconstruction. The information is often recorded without using a conventional optical microscope configuration or with limited datasets. Computational imaging allows going beyond physical limitations of optical systems, such as numerical aperture, or even obliterates the need for optical elements. For parts of the optical spectrum where imaging elements such as objectives are difficult to manufacture or image sensors cannot be miniaturized, computational imaging provides useful alternatives, in fields such as X-ray and THz radiations. === Common techniques === Among common computational imaging techniques are lensless imaging, computational speckle imaging , ptychography and Fourier ptychography. Computational imaging technique often draws on compressive sensing or phase retrieval techniques, where the angular spectrum of the object is reconstructed. Other techniques are related to the field of computational imaging, such as digital holography, computer vision and inverse problems such as tomography. == Computational processing == This is the processing of non-optically-coded images to produce new images. == Computational sensors == These are detectors that combine sensing and processing, typically in hardware, like the oversampled binary image sensor. == Early work in computer vision == Although computational photography is a currently popular buzzword in computer graphics, many of its techniques first appeared in the computer vision literature, either under other names or within papers aimed at 3D shape analysis. == Art history == Computational photography, as an art form, has been practiced by capturing differently exposed pictures of the same subject matter and combining them. This was the inspiration for the development of the wearable computer in the 1970s and early 1980s. Computational photography was inspired by the work of Charles Wyckoff, and thus computational photography datasets (e.g. differently exposed pictures of the same subject matter that are taken in order to make a single composite image) are sometimes referred to as Wyckoff Sets, in his honor. Early work in this area (joint estimation of image projection and exposure value) was undertaken by Mann and Candoccia. Charles Wyckoff devoted much of his life to creating special kinds of 3-layer photographic films that captured different exposures of the same subject matter. A picture of a nuclear explosion, taken on Wyckoff's film, appeared on the cover of Life Magazine and showed the dynamic range from the dark outer areas to the inner core.
Read more →
Lose It!

Lose It! is an American health and wellness mobile app developed by FitNow, Inc. The app generates calorie budgets for users by tracking weight, exercise, food and calorie intake, and personal goals, primarily to assist them in achieving weight loss. == History == Lose It! was developed in Boston and debuted in 2008. The app and its associated company were founded by J.J. Allaire, Charles Teague and Paul Dicristina. Prior to founding Lose It!, Teague and Allaire had founded the online research tool Onfolio, which was acquired by Microsoft in 2006. The Lose It! app was originally released as an iOS app before being released as a website in 2010 and an Android app in 2011. In 2015, Lose It! announced plans to release the app internationally. Lose It! was also available as an app for Apple Watch at its launch in 2015. The app’s “Snap It” feature, which allows users to approximate calorie counts by taking pictures of their daily meals and snacks, was released in beta in 2016. Snap It was named an Innovation Awards Honoree at the 2017 Consumer Electronics Show in Las Vegas. In 2020, Patrick Wetherille, one of the company’s earliest employees, was appointed chief executive officer. == App == Lose It! is weight loss app. The app allows users to set goals such as increasing strength, overall health/maintenance, and weight loss. It provides users recommended calorie budgets based on data such as their current weight and their desired weight. Lose It! also tracks data such as exercise/activity level and food consumption and allows users to track calories consumed by scanning barcodes for food products then retrieving calorie information for products. The app can also estimate the amount of calories in a food products. Lose It! has integration features connecting it to other apps such as Fitbit and Runkeeper. It also has social features such as joining groups and sharing progress with friends. The Premium version of the app allows users to track foods according to specific diets like keto, heart healthy or Mediterranean.
Read more →
Kernel (image processing)

In image processing, a kernel, convolution matrix, or mask is a small matrix used for blurring, sharpening, embossing, edge detection, and more. This is accomplished by doing a convolution between the kernel and an image. Or more simply, when each pixel in the output image is a function of the nearby pixels (including itself) in the input image, the kernel is that function. == Details == The general expression of a convolution is g x , y = ω ∗ f x , y = ∑ i = − a a ∑ j = − b b ω i , j f x − i , y − j , {\displaystyle g_{x,y}=\omega f_{x,y}=\sum _{i=-a}^{a}{\sum _{j=-b}^{b}{\omega _{i,j}f_{x-i,y-j}}},} where g ( x , y ) {\displaystyle g(x,y)} is the filtered image, f ( x , y ) {\displaystyle f(x,y)} is the original image, ω {\displaystyle \omega } is the filter kernel. Every element of the filter kernel is considered by − a ≤ i ≤ a {\displaystyle -a\leq i\leq a} and − b ≤ j ≤ b {\displaystyle -b\leq j\leq b} . Depending on the element values, a kernel can cause a wide range of effects: The above are just a few examples of effects achievable by convolving kernels and images. === Origin === The origin is the position of the kernel which is above (conceptually) the current output pixel. This could be outside of the actual kernel, though usually it corresponds to one of the kernel elements. For a symmetric kernel, the origin is usually the center element. == Convolution == Convolution is the process of adding each element of the image to its local neighbors, weighted by the kernel. This is related to a form of mathematical convolution. The matrix operation being performed—convolution—is not traditional matrix multiplication, despite being similarly denoted by . For example, if we have two three-by-three matrices, the first a kernel, and the second an image piece, convolution is the process of flipping both the rows and columns of the kernel and multiplying locally similar entries and summing. The element at coordinates [2, 2] (that is, the central element) of the resulting image would be a weighted combination of all the entries of the image matrix, with weights given by the kernel: ( [ a b c d e f g h i ] ∗ [ 1 2 3 4 5 6 7 8 9 ] ) [ 2 , 2 ] = {\displaystyle \left({\begin{bmatrix}a&b&c\\d&e&f\\g&h&i\end{bmatrix}}{\begin{bmatrix}1&2&3\\4&5&6\\7&8&9\end{bmatrix}}\right)[2,2]=} ( i ⋅ 1 ) + ( h ⋅ 2 ) + ( g ⋅ 3 ) + ( f ⋅ 4 ) + ( e ⋅ 5 ) + ( d ⋅ 6 ) + ( c ⋅ 7 ) + ( b ⋅ 8 ) + ( a ⋅ 9 ) . {\displaystyle (i\cdot 1)+(h\cdot 2)+(g\cdot 3)+(f\cdot 4)+(e\cdot 5)+(d\cdot 6)+(c\cdot 7)+(b\cdot 8)+(a\cdot 9).} The other entries would be similarly weighted, where we position the center of the kernel on each of the boundary points of the image, and compute a weighted sum. The values of a given pixel in the output image are calculated by multiplying each kernel value by the corresponding input image pixel values. This can be described algorithmically with the following pseudo-code: for each image row in input image: for each pixel in image row: set accumulator to zero for each kernel row in kernel: for each element in kernel row: if element position corresponding to pixel position then multiply element value corresponding to pixel value add result to accumulator endif set output image pixel to accumulator corresponding input image pixels are found relative to the kernel's origin. If the kernel is symmetric then place the center (origin) of the kernel on the current pixel. The kernel will overlap the neighboring pixels around the origin. Each kernel element should be multiplied with the pixel value it overlaps with and all of the obtained values should be summed. This resultant sum will be the new value for the current pixel currently overlapped with the center of the kernel. If the kernel is not symmetric, it has to be flipped both around its horizontal and vertical axis before calculating the convolution as above. The general form for matrix convolution is [ x 11 x 12 ⋯ x 1 n x 21 x 22 ⋯ x 2 n ⋮ ⋮ ⋱ ⋮ x m 1 x m 2 ⋯ x m n ] ∗ [ y 11 y 12 ⋯ y 1 n y 21 y 22 ⋯ y 2 n ⋮ ⋮ ⋱ ⋮ y m 1 y m 2 ⋯ y m n ] = ∑ i = 0 m − 1 ∑ j = 0 n − 1 x ( m − i ) ( n − j ) y ( 1 + i ) ( 1 + j ) {\displaystyle {\begin{bmatrix}x_{11}&x_{12}&\cdots &x_{1n}\\x_{21}&x_{22}&\cdots &x_{2n}\\\vdots &\vdots &\ddots &\vdots \\x_{m1}&x_{m2}&\cdots &x_{mn}\\\end{bmatrix}}{\begin{bmatrix}y_{11}&y_{12}&\cdots &y_{1n}\\y_{21}&y_{22}&\cdots &y_{2n}\\\vdots &\vdots &\ddots &\vdots \\y_{m1}&y_{m2}&\cdots &y_{mn}\\\end{bmatrix}}=\sum _{i=0}^{m-1}\sum _{j=0}^{n-1}x_{(m-i)(n-j)}y_{(1+i)(1+j)}} === Edge handling === Kernel convolution usually requires values from pixels outside of the image boundaries. There are a variety of methods for handling image edges. Extend The nearest border pixels are conceptually extended as far as necessary to provide values for the convolution. Corner pixels are extended in 90° wedges. Other edge pixels are extended in lines. Wrap The image is conceptually wrapped (or tiled) and values are taken from the opposite edge or corner. Mirror The image is conceptually mirrored at the edges. For example, attempting to read a pixel 3 units outside an edge reads one 3 units inside the edge instead. Crop / Avoid overlap Any pixel in the output image which would require values from beyond the edge is skipped. This method can result in the output image being slightly smaller, with the edges having been cropped. Move kernel so that values from outside of image is never required. Machine learning mainly uses this approach. Example: Kernel size 10x10, image size 32x32, result image is 23x23. Kernel Crop Any pixel in the kernel that extends past the input image isn't used and the normalizing is adjusted to compensate. Constant Use constant value for pixels outside of image. Usually black or sometimes gray is used. Generally this depends on application. === Normalization === Normalization is defined as the division of each element in the kernel by the sum of all kernel elements, so that the sum of the elements of a normalized kernel is unity. This will ensure the average pixel in the modified image is as bright as the average pixel in the original image. === Optimization === Fast convolution algorithms include: separable convolution ==== Separable convolution ==== 2D convolution with an M × N kernel requires M × N multiplications for each sample (pixel). If the kernel is separable, then the computation can be reduced to M + N multiplications. Using separable convolutions can significantly decrease the computation by doing 1D convolution twice instead of one 2D convolution. === Implementation === Here a concrete convolution implementation done with the GLSL shading language :
Read more →
Text Retrieval Conference

The Text REtrieval Conference (TREC) is an ongoing series of workshops focusing on a list of different information retrieval (IR) research areas, or tracks. It is co-sponsored by the National Institute of Standards and Technology (NIST) and the Intelligence Advanced Research Projects Activity (part of the office of the Director of National Intelligence), and began in 1992 as part of the TIPSTER Text program. Its purpose is to support and encourage research within the information retrieval community by providing the infrastructure necessary for large-scale evaluation of text retrieval methodologies and to increase the speed of lab-to-product transfer of technology. TREC's evaluation protocols have improved many search technologies. A 2010 study estimated that "without TREC, U.S. Internet users would have spent up to 3.15 billion additional hours using web search engines between 1999 and 2009." Hal Varian the Chief Economist at Google wrote that "The TREC data revitalized research on information retrieval. Having a standard, widely available, and carefully constructed set of data laid the groundwork for further innovation in this field." Each track has a challenge wherein NIST provides participating groups with data sets and test problems. Depending on track, test problems might be questions, topics, or target extractable features. Uniform scoring is performed so the systems can be fairly evaluated. After evaluation of the results, a workshop provides a place for participants to collect together thoughts and ideas and present current and future research work.Text Retrieval Conference started in 1992, funded by DARPA (US Defense Advanced Research Project) and run by NIST. Its purpose was to support research within the information retrieval community by providing the infrastructure necessary for large-scale evaluation of text retrieval methodologies. == Goals == Encourage retrieval search based on large text collections Increase communication among industry, academia, and government by creating an open forum for the exchange of research ideas Speed the transfer of technology from research labs into commercial products by demonstrating substantial improvements retrieval methodologies on real world problems To increase the availability of appropriate evaluation techniques for use by industry and academia including development of new evaluation techniques more applicable to current systems TREC is overseen by a program committee consisting of representatives from government, industry, and academia. For each TREC, NIST provide a set of documents and questions. Participants run their own retrieval system on the data and return to NIST a list of retrieved top-ranked documents. NIST pools the individual result judges the retrieved documents for correctness and evaluates the results. The TREC cycle ends with a workshop that is a forum for participants to share their experiences. == Relevance judgments in TREC == TREC defines relevance as: "If you were writing a report on the subject of the topic and would use the information contained in the document in the report, then the document is relevant." Most TREC retrieval tasks use binary relevance: a document is either relevant or not relevant. Some TREC tasks use graded relevance, capturing multiple degrees of relevance. Most TREC collections are too large to perform complete relevance assessment; for these collections it is impossible to calculate the absolute recall for each query. To decide which documents to assess, TREC usually uses a method call pooling. In this method, the top-ranked n documents from each contributing run are aggregated, and the resulting document set is judged completely. == Various TRECs == In 1992 TREC-1 was held at NIST. The first conference attracted 28 groups of researchers from academia and industry. It demonstrated a wide range of different approaches to the retrieval of text from large document collections .Finally TREC1 revealed the facts that automatic construction of queries from natural language query statements seems to work. Techniques based on natural language processing were no better no worse than those based on vector or probabilistic approach. TREC2 Took place in August 1993. 31 group of researchers participated in this. Two types of retrieval were examined. Retrieval using an ‘ad hoc’ query and retrieval using a ‘routing' query In TREC-3 a small group experiments worked with Spanish language collection and others dealt with interactive query formulation in multiple databases TREC-4 they made even shorter to investigate the problems with very short user statements TREC-5 includes both short and long versions of the topics with the goal of carrying out deeper investigation into which types of techniques work well on various lengths of topics In TREC-6 Three new tracks speech, cross language, high precision information retrieval were introduced. The goal of cross language information retrieval is to facilitate research on system that are able to retrieve relevant document regardless of language of the source document TREC-7 contained seven tracks out of which two were new Query track and very large corpus track. The goal of the query track was to create a large query collection TREC-8 contain seven tracks out of which two –question answering and web tracks were new. The objective of QA query is to explore the possibilities of providing answers to specific natural language queries TREC-9 Includes seven tracks In TREC-10 Video tracks introduced Video tracks design to promote research in content based retrieval from digital video In TREC-11 Novelty tracks introduced. The goal of novelty track is to investigate systems abilities to locate relevant and new information within the ranked set of documents returned by a traditional document retrieval system TREC-12 held in 2003 added three new tracks; Genome track, robust retrieval track, HARD (Highly Accurate Retrieval from Documents) == Tracks == === Current tracks === New tracks are added as new research needs are identified, this list is current for TREC 2018. CENTRE Track – Goal: run in parallel CLEF 2018, NTCIR-14, TREC 2018 to develop and tune an IR reproducibility evaluation protocol (new track for 2018). Common Core Track – Goal: an ad hoc search task over news documents. Complex Answer Retrieval (CAR) – Goal: to develop systems capable of answering complex information needs by collating information from an entire corpus. Incident Streams Track – Goal: to research technologies to automatically process social media streams during emergency situations (new track for TREC 2018). The News Track – Goal: partnership with The Washington Post to develop test collections in news environment (new for 2018). Precision Medicine Track – Goal: a specialization of the Clinical Decision Support track to focus on linking oncology patient data to clinical trials. Real-Time Summarization Track (RTS) – Goal: to explore techniques for real-time update summaries from social media streams. === Past tracks === Chemical Track – Goal: to develop and evaluate technology for large scale search in chemistry-related documents, including academic papers and patents, to better meet the needs of professional searchers, and specifically patent searchers and chemists. Clinical Decision Support Track – Goal: to investigate techniques for linking medical cases to information relevant for patient care Contextual Suggestion Track – Goal: to investigate search techniques for complex information needs that are highly dependent on context and user interests. Crowdsourcing Track – Goal: to provide a collaborative venue for exploring crowdsourcing methods both for evaluating search and for performing search tasks. Genomics Track – Goal: to study the retrieval of genomic data, not just gene sequences but also supporting documentation such as research papers, lab reports, etc. Last ran on TREC 2007. Dynamic Domain Track – Goal: to investigate domain-specific search algorithms that adapt to the dynamic information needs of professional users as they explore in complex domains. Enterprise Track – Goal: to study search over the data of an organization to complete some task. Last ran on TREC 2008. Entity Track – Goal: to perform entity-related search on Web data. These search tasks (such as finding entities and properties of entities) address common information needs that are not that well modeled as ad hoc document search. Cross-Language Track – Goal: to investigate the ability of retrieval systems to find documents topically regardless of source language. After 1999, this track spun off into CLEF. FedWeb Track – Goal: to select best resources to forward a query to, and merge the results so that most relevant are on the top. Federated Web Search Track – Goal: to investigate techniques for the selection and combination of search results from a large number of real on-line web search services. Filtering Track – Goal: to binarily decide retrieval of new
Read more →
Application software

Application software is software that is intended for end-user use – not operating, administering or programming a computer. It includes programs such as word processors, web browsers, media players, and mobile applications used in daily tasks. An application (app, application program, software application) is any program that can be categorized as application software. Application is a subjective classification that is often used to differentiate from system and utility software. Application software represents the user-facing layer of computing systems, designed to translate complex system capabilities into task-oriented, goal-driven workflows. Unlike system software, which focuses on hardware orchestration and resource management, application software is centered on problem abstraction, user interaction, and domain-specific functionality. The abbreviation app became popular with the 2008 introduction of the iOS App Store, to refer to applications for mobile devices such as smartphones and tablets. Later, with the release of the Mac App Store in 2010 and the Windows Store in 2011, it began to be used to refer to end-user software in general, regardless of platform. Applications may be bundled with the computer and its system software or published separately. Applications may be proprietary or open-source. == Terminology == === Meaning program and software === When used as an adjective, application can have a broader meaning than that described in this article. For example, concepts such as application programming interface (API), application server, application virtualization, application lifecycle management and portable application refer to programs and software in general. === Distinction between system and application software === The distinction between system and application software is subjective and has been the subject of controversy. For example, one of the key questions in the United States v. Microsoft Corp. antitrust trial was whether Microsoft's Internet Explorer web browser was part of its Windows operating system or a separate piece of application software. As another example, the GNU/Linux naming controversy is, in part, due to disagreement about the relationship between the Linux kernel and the operating systems built over this kernel. In some types of embedded systems, the application software and the operating system software may be indistinguishable by the user, as in the case of software used to control a VCR, DVD player, or microwave oven. The above definitions may exclude some applications that may exist on some computers in large organizations. For an alternative definition of an app: see Application Portfolio Management. === Killer application === A killer application (killer app, coined in the late 1980s) is an application that is so popular that it causes demand for its host platform to increase. For example, VisiCalc was the first modern spreadsheet software for the Apple II and helped sell the then-new personal computers into offices. For the BlackBerry, it was its email software. === Software suite === As software suite consists of multiple applications bundled together. They usually have related functions, features, and user interfaces, and may be able to interact with each other, e.g. open each other's files. Business applications often come in suites, e.g. Microsoft Office, LibreOffice and iWork, which bundle together a word processor, a spreadsheet, etc.; but suites exist for other purposes, e.g. graphics or music. == Ways to classify == As there so many applications and since their attributes vary so dramatically, there are many different ways to classify them. === By legal aspects === Proprietary software is protected under an exclusive copyright, and a software license grants limited usage rights. Such applications may allow add-ons from third parties. Free and open-source software (FOSS) can be run, distributed, sold, and extended for any purpose. FOSS software released under a free license may be perpetual and also royalty-free. Perhaps, the owner, the holder or third-party enforcer of any right (copyright, trademark, patent, or ius in re aliena) are entitled to add exceptions, limitations, time decays or expiring dates to the license terms of use. Public-domain software is a type of FOSS that is royalty-free and can be run, distributed, modified, reversed, republished, or created in derivative works without any copyright attribution and therefore revocation. It can even be sold, but without transferring the public domain property to other single subjects. Public-domain software can be released under a (un)licensing legal statement, which enforces those terms and conditions for an indefinite duration (for a lifetime, or forever). === By platform === An application can be categorized by the host platform on which it runs. Notable platforms include operating system (native), web browser, cloud computing and mobile. For example a web application runs in a web browser whereas a more traditional, native application runs in the environment of a computer's operating system. There has been a contentious debate regarding web applications replacing native applications for many purposes, especially on mobile devices such as smartphones and tablets. Web apps have indeed greatly increased in popularity for some uses, but the advantages of applications make them unlikely to disappear soon, if ever. Furthermore, the two can be complementary, and even integrated. === Horizontal vs. vertical === Application software can be seen as either horizontal or vertical. Horizontal applications are more popular and widespread, because they are general purpose, for example word processors or databases. Vertical applications are niche products, designed for a particular type of industry or business, or department within an organization. Integrated suites of software will try to handle every specific aspect possible of, for example, manufacturing or banking worker, accounting, or customer service. === By purpose === There are many types of application software: Enterprise Addresses the needs of an entire organization's processes and data flows, across several departments, often in a large distributed environment. Examples include enterprise resource planning systems, customer relationship management (CRM) systems, data replication engines, and supply chain management software. Departmental Software is a sub-type of enterprise software with a focus on smaller organizations or groups within a large organization. (Examples include travel expense management and IT Helpdesk.) Enterprise infrastructure Provides common capabilities needed to support enterprise software systems. (Examples include databases, email servers, and systems for managing networks and security.) Application platform as a service (aPaaS) A cloud computing service that offers development and deployment environments for application services. Knowledge worker Lets users create and manage information, often for and individual media editors may aid in multiple information worker tasks. Content access Used primarily to access content without editing, but may include software that allows for content editing. Such software addresses the needs of individuals and groups to consume digital entertainment and published digital content. (Examples include media players, web browsers, and help browsers.) Educational Related to content access software, but has the content or features adapted for use by educators or students. For example, it may deliver evaluations (tests), track progress through material, or include collaborative capabilities. Simulation Simulates physical or abstract systems for either research, training, or entertainment purposes. Media development Generates print and electronic media for others to consume, most often in a commercial or educational setting. This includes graphic-art software, desktop publishing software, multimedia development software, HTML editors, digital-animation editors, digital audio and video composition, and many others. Engineering Used in developing hardware and software products. This includes computer-aided design (CAD), computer-aided engineering (CAE), computer language editing and compiling tools, integrated development environments, and application programmer interfaces. Entertainment Refers to video games, screen savers, programs to display motion pictures or play recorded music, and other forms of entertainment which can be experienced through the use of a computing device. == Taxonomy == This section is a taxonomy of kinds of applications. This organization is but one of many different ways to organize them. A kind is included in only one category even if it logically fits in multiple. === General-purpose === Calculator Spreadsheet Web browser Web mapping E-commerce Social media === Communication === Chat Email Presentation software Phone Messages Networking software Web conferencing === Documentation === Desktop
Read more →
Keyword extraction

Keyword extraction is tasked with the automatic identification of terms that best describe the subject of a document. Key phrases, key terms, key segments or just keywords are the terminology which is used for defining the terms that represent the most relevant information contained in the document. Although the terminology is different, function is the same: characterization of the topic discussed in a document. The task of keyword extraction is an important problem in text mining, information extraction, information retrieval and natural language processing (NLP). == Keyword assignment vs. extraction == Keyword assignment methods can be roughly divided into: keyword assignment (keywords are chosen from controlled vocabulary or taxonomy) and keyword extraction (keywords are chosen from words that are explicitly mentioned in original text). Methods for automatic keyword extraction can be supervised, semi-supervised, or unsupervised. Unsupervised methods can be further divided into simple statistics, linguistics or graph-based, or ensemble methods that combine some or most of these methods.
Read more →
Agent verification

Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio
Read more →
Lesk algorithm

The Lesk algorithm is a classical algorithm for word sense disambiguation introduced by Michael E. Lesk in 1986. It operates on the premise that words within a given context are likely to share a common meaning. This algorithm compares the dictionary definitions of an ambiguous word with the words in its surrounding context to determine the most appropriate sense. Variations, such as the Simplified Lesk algorithm, have demonstrated improved precision and efficiency. However, the Lesk algorithm has faced criticism for its sensitivity to definition wording and its reliance on brief glosses. Researchers have sought to enhance its accuracy by incorporating additional resources like thesauruses and syntactic models. == Overview == The Lesk algorithm is based on the assumption that words in a given "neighborhood" (section of text) will tend to share a common topic. A simplified version of the Lesk algorithm is to compare the dictionary definition of an ambiguous word with the terms contained in its neighborhood. Versions have been adapted to use WordNet. An implementation might look like this: for every sense of the word being disambiguated one should count the number of words that are in both the neighborhood of that word and in the dictionary definition of that sense the sense that is to be chosen is the sense that has the largest number of this count. A frequently used example illustrating this algorithm is for the context "pine cone". The following dictionary definitions are used: PINE 1. kinds of evergreen tree with needle-shaped leaves 2. waste away through sorrow or illness CONE 1. solid body which narrows to a point 2. something of this shape whether solid or hollow 3. fruit of certain evergreen trees As can be seen, the best intersection is Pine #1 ⋂ Cone #3 = 2. == Simplified Lesk algorithm == In Simplified Lesk algorithm, the correct meaning of each word in a given context is determined individually by locating the sense that overlaps the most between its dictionary definition and the given context. Rather than simultaneously determining the meanings of all words in a given context, this approach tackles each word individually, independent of the meaning of the other words occurring in the same context. "A comparative evaluation performed by Vasilescu et al. (2004) has shown that the simplified Lesk algorithm can significantly outperform the original definition of the algorithm, both in terms of precision and efficiency. By evaluating the disambiguation algorithms on the Senseval-2 English all words data, they measure a 58% precision using the simplified Lesk algorithm compared to the only 42% under the original algorithm. Note: Vasilescu et al. implementation considers a back-off strategy for words not covered by the algorithm, consisting of the most frequent sense defined in WordNet. This means that words for which all their possible meanings lead to zero overlap with current context or with other word definitions are by default assigned sense number one in WordNet." Simplified LESK Algorithm with smart default word sense (Vasilescu et al., 2004) The COMPUTEOVERLAP function returns the number of words in common between two sets, ignoring function words or other words on a stop list. The original Lesk algorithm defines the context in a more complex way. == Criticisms == Unfortunately, Lesk’s approach is very sensitive to the exact wording of definitions, so the absence of a certain word can radically change the results. Further, the algorithm determines overlaps only among the glosses of the senses being considered. This is a significant limitation in that dictionary glosses tend to be fairly short and do not provide sufficient vocabulary to relate fine-grained sense distinctions. A lot of work has appeared offering different modifications of this algorithm. These works use other resources for analysis (thesauruses, synonyms dictionaries or morphological and syntactic models): for instance, it may use such information as synonyms, different derivatives, or words from definitions of words from definitions. == Lesk variants == Original Lesk (Lesk, 1986) Adapted/Extended Lesk (Banerjee and Pederson, 2002/2003): In the adaptive lesk algorithm, a word vector is created corresponds to every content word in the wordnet gloss. Concatenating glosses of related concepts in WordNet can be used to augment this vector. The vector contains the co-occurrence counts of words co-occurring with w in a large corpus. Adding all the word vectors for all the content words in its gloss creates the Gloss vector g for a concept. Relatedness is determined by comparing the gloss vector using the Cosine similarity measure. There are a lot of studies concerning Lesk and its extensions: Wilks and Stevenson, 1998, 1999; Mahesh et al., 1997; Cowie et al., 1992; Yarowsky, 1992; Pook and Catlett, 1988; Kilgarriff and Rosensweig, 2000; Kwong, 2001; Nastase and Szpakowicz, 2001; Gelbukh and Sidorov, 2004.
Read more →
Application performance engineering

Application performance engineering is a method to develop and test application performance in various settings, including mobile computing, the cloud, and conventional information technology (IT). == Methodology == According to the American National Institute of Standards and Technology, nearly four out of every five dollars spent on the total cost of ownership of an application is directly attributable to finding and fixing issues post-deployment. A full one-third of this cost could be avoided with better software testing. Application performance engineering attempts to test software before it is published. While practices vary among organizations, the method attempts to emulate the real-world conditions that software in development will confront, including network deployment and access by mobile devices. Techniques include network virtualization.
Read more →
Query understanding

Query understanding is the process of inferring the intent of a search engine user by extracting semantic meaning from the searcher’s keywords. Query understanding methods generally take place before the search engine retrieves and ranks results. It is related to natural language processing but specifically focused on the understanding of search queries. == Methods == === Stemming and lemmatization === Many languages inflect words to reflect their role in the utterance they appear in. The variation between various forms of a word is likely to be of little importance for the relatively coarse-grained model of meaning involved in a retrieval system, and for this reason the task of conflating the various forms of a word is a potentially useful technique to increase recall of a retrieval system. Stemming algorithms, also known as stemmers, typically use a collection of simple rules to remove suffixes intended to model the language’s inflection rules. For some languages, there are simple lemmatisation methods to reduce a word in query to its lemma or root form or its stem; for others, this operation involves non-trivial string processing and may require recognizing the word's part of speech or referencing a lexical database. The effectiveness of stemming and lemmatization varies across languages. === Query Segmentation === Query segmentation is a key component of query understanding, aiming to divide a query into meaningful segments. Traditional approaches, such as the bag-of-words model, treat individual words as independent units, which can limit interpretative accuracy. For languages like Chinese, where words are not separated by spaces, segmentation is essential, as individual characters often lack standalone meaning. Even in English, the BOW model may not capture the full meaning, as certain phrases—such as "New York"—carry significance as a whole rather than as isolated terms. By identifying phrases or entities within queries, query segmentation enhances interpretation, enabling search engines to apply proximity and ordering constraints, ultimately improving search accuracy and user satisfaction. === Entity recognition === Entity recognition is the process of locating and classifying entities within a text string. Named-entity recognition specifically focuses on named entities, such as names of people, places, and organizations. In addition, entity recognition includes identifying concepts in queries that may be represented by multi-word phrases. Entity recognition systems typically use grammar-based linguistic techniques or statistical machine learning models. === Query rewriting === Query rewriting is the process of automatically reformulating a search query to more accurately capture its intent. Query expansion adds additional query terms, such as synonyms, in order to retrieve more documents and thereby increase recall. Query relaxation removes query terms to reduce the requirements for a document to match the query, thereby also increasing recall. Other forms of query rewriting, such as automatically converting consecutive query terms into phrases and restricting query terms to specific fields, aim to increase precision. === Spelling Correction === Automatic spelling correction is a critical feature of modern search engines, designed to address common spelling errors in user queries. Such errors are especially frequent as users often search for unfamiliar topics. By correcting misspelled queries, search engines enhance their understanding of user intent, thereby improving the relevance and quality of search results and overall user experience.
Read more →
Cross-validation (statistics)

Cross-validation, sometimes called rotation estimation or out-of-sample testing, is any of various similar model validation techniques for assessing how the results of a statistical analysis will generalize to an independent data set. Cross-validation includes resampling and sample splitting methods that use different portions of the data to test and train a model on different iterations. It is often used in settings where the goal is prediction, and one wants to estimate how accurately a predictive model will perform in practice. It can also be used to assess the quality of a fitted model and the stability of its parameters. In a prediction problem, a model is usually given a dataset of known data on which training is run (training dataset), and a dataset of unknown data (or first seen data) against which the model is tested (called the validation dataset or testing set). The goal of cross-validation is to test the model's ability to predict new data that was not used in estimating it, in order to flag problems like overfitting or selection bias and to give an insight on how the model will generalize to an independent dataset (i.e., an unknown dataset, for instance from a real problem). One round of cross-validation involves partitioning a sample of data into complementary subsets, performing the analysis on one subset (called the training set), and validating the analysis on the other subset (called the validation set or testing set). To reduce variability, in most methods multiple rounds of cross-validation are performed using different partitions, and the validation results are combined (e.g. averaged) over the rounds to give an estimate of the model's predictive performance. In summary, cross-validation combines (averages) measures of fitness in prediction to derive a more accurate estimate of model prediction performance. == Motivation == Assume a model with one or more unknown parameters, and a data set to which the model can be fit (the training data set). The fitting process optimizes the model parameters to make the model fit the training data as well as possible. If an independent sample of validation data is taken from the same population as the training data, it will generally turn out that the model does not fit the validation data as well as it fits the training data. The size of this difference is likely to be large especially when the size of the training data set is small, or when the number of parameters in the model is large. Cross-validation is a way to estimate the size of this effect. === Example: linear regression === In linear regression, there exist real response values y 1 , … , y n {\textstyle y_{1},\ldots ,y_{n}} , and n p-dimensional vector covariates x1, ..., xn. The components of the vector xi are denoted xi1, ..., xip. If least squares is used to fit a function in the form of a hyperplane ŷ = a + βTx to the data (xi, yi) 1 ≤ i ≤ n, then the fit can be assessed using the mean squared error (MSE). The MSE for given estimated parameter values a and β on the training set (xi, yi) 1 ≤ i ≤ n is defined as: MSE = 1 n ∑ i = 1 n ( y i − y ^ i ) 2 = 1 n ∑ i = 1 n ( y i − a − β T x i ) 2 = 1 n ∑ i = 1 n ( y i − a − β 1 x i 1 − ⋯ − β p x i p ) 2 {\displaystyle {\begin{aligned}{\text{MSE}}&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-{\hat {y}}_{i})^{2}={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-{\boldsymbol {\beta }}^{T}\mathbf {x} _{i})^{2}\\&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-\beta _{1}x_{i1}-\dots -\beta _{p}x_{ip})^{2}\end{aligned}}} If the model is correctly specified, it can be shown under mild assumptions that the expected value of the MSE for the training set is (n − p − 1)/(n + p + 1) < 1 times the expected value of the MSE for the validation set (the expected value is taken over the distribution of training sets). Thus, a fitted model and computed MSE on the training set will result in an optimistically biased assessment of how well the model will fit an independent data set. This biased estimate is called the in-sample estimate of the fit, whereas the cross-validation estimate is an out-of-sample estimate. Since in linear regression it is possible to directly compute the factor (n − p − 1)/(n + p + 1) by which the training MSE underestimates the validation MSE under the assumption that the model specification is valid, cross-validation can be used for checking whether the model has been overfitted, in which case the MSE in the validation set will substantially exceed its anticipated value. (Cross-validation in the context of linear regression is also useful in that it can be used to select an optimally regularized cost function.) === General case === In most other regression procedures (e.g. logistic regression), there is no simple formula to compute the expected out-of-sample fit. Cross-validation is, thus, a generally applicable way to predict the performance of a model on unavailable data using numerical computation in place of theoretical analysis. == Types == Two types of cross-validation can be distinguished: exhaustive and non-exhaustive cross-validation. === Exhaustive cross-validation === Exhaustive cross-validation methods are cross-validation methods which learn and test on all possible ways to divide the original sample into a training and a validation set. ==== Leave-p-out cross-validation ==== Leave-p-out cross-validation (LpO CV) involves using p observations as the validation set and the remaining observations as the training set. This is repeated on all ways to cut the original sample on a validation set of p observations and a training set. LpO cross-validation require training and validating the model C p n {\displaystyle C_{p}^{n}} times, where n is the number of observations in the original sample, and where C p n {\displaystyle C_{p}^{n}} is the binomial coefficient. For p > 1 and for even moderately large n, LpO CV can become computationally infeasible. For example, with n = 100 and p = 30, C 30 100 ≈ 3 × 10 25 . {\displaystyle C_{30}^{100}\approx 3\times 10^{25}.} A variant of LpO cross-validation with p=2 known as leave-pair-out cross-validation has been recommended as a nearly unbiased method for estimating the area under ROC curve of binary classifiers. ==== Leave-one-out cross-validation ==== Leave-one-out cross-validation (LOOCV) is a particular case of leave-p-out cross-validation with p = 1. The process looks similar to jackknife; however, with cross-validation one computes a statistic on the left-out sample(s), while with jackknifing one computes a statistic from the kept samples only. LOO cross-validation requires less computation time than LpO cross-validation because there are only C 1 n = n {\displaystyle C_{1}^{n}=n} passes rather than C p n {\displaystyle C_{p}^{n}} . However, n {\displaystyle n} passes may still require quite a large computation time, in which case other approaches such as k-fold cross validation may be more appropriate. Pseudo-code algorithm: Input: x, {vector of length N with x-values of incoming points} y, {vector of length N with y-values of the expected result} interpolate( x_in, y_in, x_out ), { returns the estimation for point x_out after the model is trained with x_in-y_in pairs} Output: err, {estimate for the prediction error} Steps: err ← 0 for i ← 1, ..., N do // define the cross-validation subsets x_in ← (x[1], ..., x[i − 1], x[i + 1], ..., x[N]) y_in ← (y[1], ..., y[i − 1], y[i + 1], ..., y[N]) x_out ← x[i] y_out ← interpolate(x_in, y_in, x_out) err ← err + (y[i] − y_out)^2 end for err ← err/N === Non-exhaustive cross-validation === Non-exhaustive cross validation methods do not compute all ways of splitting the original sample. These methods are approximations of leave-p-out cross-validation. ==== k-fold cross-validation ==== In k-fold cross-validation, the original sample is randomly partitioned into k equal sized subsamples, often referred to as "folds". Of the k subsamples, a single subsample is retained as the validation data for testing the model, and the remaining k − 1 subsamples are used as training data. The cross-validation process is then repeated k times, with each of the k subsamples used exactly once as the validation data. The k results can then be averaged to produce a single estimation. The advantage of this method over repeated random sub-sampling (see below) is that all observations are used for both training and validation, and each observation is used for validation exactly once. 10-fold cross-validation is commonly used, but in general k remains an unfixed parameter. For example, setting k = 2 results in 2-fold cross-validation. In 2-fold cross-validation, the dataset is randomly shuffled into two sets d0 and d1, so that both sets are equal size (this is usually implemented by shuffling the data array and then splitting it in two). We then train on d0 and validate on d1, followed by training on d1 and validating on d0. When k = n (the number of observations), k-fold cross-validation is equivalent to leave-one-out cr
Read more →
Deep learning

In machine learning, deep learning (DL) focuses on utilizing multilayered neural networks to perform tasks such as classification, regression, and representation learning. The field takes inspiration from biological neuroscience and revolves around stacking artificial neurons into layers and "training" them to process data. The adjective "deep" refers to the use of multiple layers (ranging from three to several hundred or thousands) in the network. Methods used can be supervised, semi-supervised or unsupervised. Some common deep learning network architectures include fully connected networks, deep belief networks, recurrent neural networks, convolutional neural networks, generative adversarial networks, transformers, and neural radiance fields. These architectures have been applied to fields including computer vision, speech recognition, natural language processing, machine translation, bioinformatics, drug design, medical image analysis, climate science, material inspection and board game programs, where they have produced results comparable to and in some cases surpassing human expert performance. Early forms of neural networks were inspired by information processing and distributed communication nodes in biological systems, particularly the human brain. However, current neural networks do not intend to model the brain function of organisms, and are generally seen as low-quality models for that purpose. == Overview == Most modern deep learning models are based on multi-layered neural networks such as convolutional neural networks and transformers, although they can also include propositional formulas or latent variables organized layer-wise in deep generative models such as the nodes in deep belief networks and deep Boltzmann machines. Fundamentally, deep learning refers to a class of machine learning algorithms in which a hierarchy of layers is used to transform input data into a progressively more abstract and composite representation. For example, in an image recognition model, the raw input may be an image (represented as a tensor of pixels). The first representational layer may attempt to identify basic shapes such as lines and circles, the second layer may compose and encode arrangements of edges, the third layer may encode a nose and eyes, and the fourth layer may recognize that the image contains a face. Importantly, a deep learning process can learn which features to optimally place at which level on its own. Prior to deep learning, machine learning techniques often involved hand-crafted feature engineering to transform the data into a more suitable representation for a classification algorithm to operate on. In the deep learning approach, features are not hand-crafted and the model discovers useful feature representations from the data automatically. This does not eliminate the need for hand-tuning; for example, varying numbers of layers and layer sizes can provide different degrees of abstraction. The word "deep" in "deep learning" refers to the number of layers through which the data is transformed. More precisely, deep learning systems have a substantial credit assignment path (CAP) depth. The CAP is the chain of transformations from input to output. CAPs describe potentially causal connections between input and output. For a feedforward neural network, the depth of the CAPs is that of the network and is the number of hidden layers plus one (as the output layer is also parameterized). For recurrent neural networks, in which a signal may propagate through a layer more than once, the CAP depth is potentially unlimited. No universally agreed-upon threshold of depth divides shallow learning from deep learning, but most researchers agree that deep learning involves CAP depth higher than two. CAP of depth two has been shown to be a universal approximator in the sense that it can emulate any function. Beyond that, more layers do not add to the function approximator ability of the network. Deep models (CAP > two) are able to extract better features than shallow models and hence, extra layers help in learning the features effectively. Deep learning architectures can be constructed with a greedy layer-by-layer method. Deep learning helps to disentangle these abstractions and pick out which features improve performance. Deep learning algorithms can be applied to unsupervised learning tasks. This is an important benefit because unlabeled data is more abundant than labeled data. Examples of deep structures that can be trained in an unsupervised manner are deep belief networks. The term deep learning was introduced to the machine learning community by Rina Dechter in 1986, and to artificial neural networks by Igor Aizenberg and colleagues in 2000, in the context of Boolean threshold neurons. The etymology of the term is more complicated. == Interpretations == Deep neural networks are generally interpreted in terms of the universal approximation theorem or probabilistic inference. The classic universal approximation theorem concerns the capacity of feedforward neural networks with a single hidden layer of finite size to approximate continuous functions. In 1989, the first proof was published by George Cybenko for sigmoid activation functions and was generalised to feed-forward multi-layer architectures in 1991 by Kurt Hornik. Recent work also showed that universal approximation also holds for non-bounded activation functions such as Kunihiko Fukushima's rectified linear unit. The universal approximation theorem for deep neural networks concerns the capacity of networks with bounded width but the depth is allowed to grow. Lu et al. proved that if the width of a deep neural network with ReLU activation is strictly larger than the input dimension, then the network can approximate any Lebesgue integrable function; if the width is smaller or equal to the input dimension, then a deep neural network is not a universal approximator. The probabilistic interpretation derives from the field of machine learning. It features inference, as well as the optimization concepts of training and testing, related to fitting and generalization, respectively. More specifically, the probabilistic interpretation considers the activation nonlinearity as a cumulative distribution function. The probabilistic interpretation led to the introduction of dropout as regularizer in neural networks. The probabilistic interpretation was introduced by researchers including Hopfield, Widrow and Narendra and popularized in surveys such as the one by Bishop. == History == === Before 1980 === There are two types of artificial neural network (ANN): feedforward neural network (FNN) or multilayer perceptron (MLP) and recurrent neural networks (RNN). RNNs have cycles in their connectivity structure, whereas FNNs do not. In the 1920s, Wilhelm Lenz and Ernst Ising created the Ising model which is essentially a non-learning RNN architecture consisting of neuron-like threshold elements. In 1972, Shun'ichi Amari made this architecture adaptive. His learning RNN was republished by John Hopfield in 1982. Other early recurrent neural networks were published by Kaoru Nakano in 1971. Already in 1948, Alan Turing produced work on "Intelligent Machinery" that was not published in his lifetime, containing "ideas related to artificial evolution and learning RNNs". Frank Rosenblatt (1958) proposed the perceptron, an MLP with 3 layers: an input layer, a hidden layer with randomized weights that did not learn, and an output layer. He later published a 1962 book that also introduced variants and computer experiments, including a version with four-layer perceptrons "with adaptive preterminal networks" where the last two layers have learned weights (here he credits H. D. Block and B. W. Knight). The book cites an earlier network by R. D. Joseph (1960) "functionally equivalent to a variation of" this four-layer system (the book mentions Joseph over 30 times). Should Joseph therefore be considered the originator of proper adaptive multilayer perceptrons with learning hidden units? Unfortunately, the learning algorithm was not a functional one, and fell into oblivion. The first working deep learning algorithm was the Group method of data handling, a method to train arbitrarily deep neural networks, published by Alexey Ivakhnenko and Lapa in 1965. They regarded it as a form of polynomial regression, or a generalization of Rosenblatt's perceptron to handle more complex, nonlinear, and hierarchical relationships. A 1971 paper described a deep network with eight layers trained by this method, which is based on layer by layer training through regression analysis. Superfluous hidden units are pruned using a separate validation set. Since the activation functions of the nodes are Kolmogorov-Gabor polynomials, these were also the first deep networks with multiplicative units or "gates". The first deep learning multilayer perceptron trained by stochastic gradient descent was published in 1967 by Shun'ichi
Read more →
Abdul Majid Bhurgri Institute of Language Engineering

Abdul Majid Bhurgri Institute of Language Engineering (Sindhi: عبدالماجد ڀرڳڙي انسٽيٽيوٽ آف لئنگئيج انجنيئرنگ) is an autonomous body under the administrative control of the Culture, Tourism and Antiquities Department, Government of Sindh established for bringing Sindhi language at par with national and international languages in all computational process and Natural language processing. == Establishment == In recognition to services of Abdul-Majid Bhurgri, who is the founder of Sindhi computing, Government of Sindh has established the institute after his name. The institute was primarily initiated on the concept given by a language engineer and linguist Amar Fayaz Buriro in briefing to the Minister, Culture, Tourism and Antiquities, Government of Sindh, Syed Sardar Ali Shah on 21 February 2017 on celebration of International Mother Language Day in Sindhi Language Authority, Hyderabad, Sindh. After the presentation and concept given by Amar Fayaz Buriro, the minister Syed Sardar Ali Shah had announced the Institute. Then, Government of Sindh added the development scheme in the Budget of fiscal year 2017-2018. == Projects == The Institute has developed several projects aimed at advancing the Sindhi language and promoting linguistic research. Notable initiatives include the AMBILE Hamiz Ali Sindhi Optical character recognition, which allows for the accurate digitization of Sindhi text, and the ongoing Sindhi WordNet System, a project to build a comprehensive lexical database for Natural language processing. The institute has also created the Font, which integrates symbols from the Indus script, Khudabadi script, and modern Perso-Arabic Script Code for Information Interchange into a single resource for researchers]. Additionally, institute has developed online converter tools that automatically transliterate between the Arabic-Perso script and Devanagari script, improving linguistic accessibility. Another key project is Bhittaipedia, a digital platform dedicated to the preservation and dissemination of the poetry of Shah Abdul Latif Bhittai, one of Sindh's most renowned poet. == Location == The institute is established behind Sindh Museum and Sindhi Language Authority, N-5 National Highway, Qasimabad, Hyderabad, Sindh.
Read more →