AI Avatar For Videos

AI Avatar For Videos — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Multi-exposure HDR capture

  In photography and videography, multi-exposure HDR capture is a technique that creates high dynamic range (HDR) images (or extended dynamic range images) by taking and combining multiple exposures of the same subject matter at different exposures. Combining multiple images in this way results in an image with a greater dynamic range than what would be possible by taking one single image. The technique can also be used to capture video by taking and combining multiple exposures for each frame of the video. The term "HDR" is used frequently to refer to the process of creating HDR images from multiple exposures. Many smartphones have an automated HDR feature that relies on computational imaging techniques to capture and combine multiple exposures. A single image captured by a camera provides a finite range of luminosity inherent to the medium, whether it is a digital sensor or film. Outside this range, tonal information is lost and no features are visible; tones that exceed the range are "burned out" and appear pure white in the brighter areas, while tones that fall below the range are "crushed" and appear pure black in the darker areas. The ratio between the maximum and the minimum tonal values that can be captured in a single image is known as the dynamic range. In photography, dynamic range is measured in exposure value (EV) differences, also known as stops. The human eye's response to light is non-linear: halving the light level does not halve the perceived brightness of a space, it makes it look only slightly dimmer. For most illumination levels, the response is approximately logarithmic. Human eyes adapt fairly rapidly to changes in light levels. HDR can thus produce images that look more like what a human sees when looking at the subject. This technique can be applied to produce images that preserve local contrast for a natural rendering, or exaggerate local contrast for artistic effect. HDR is useful for recording many real-world scenes containing a wider range of brightness than can be captured directly, typically both bright, direct sunlight and deep shadows. Due to the limitations of printing and display contrast, the extended dynamic range of HDR images must be compressed to the range that can be displayed. The method of rendering a high dynamic range image to a standard monitor or printing device is called tone mapping; it reduces the overall contrast of an HDR image to permit display on devices or prints with lower dynamic range. == Benefits == One aim of HDR is to present a similar range of luminance to that experienced through the human visual system. The human eye, through non-linear response, adaptation of the iris, and other methods, adjusts constantly to a broad range of luminance present in the environment. The brain continuously interprets this information so that a viewer can see in a wide range of light conditions. Most cameras are limited to a much narrower range of exposure values within a single image, due to the dynamic range of the capturing medium. With a limited dynamic range, tonal differences can be captured only within a certain range of brightness. Outside of this range, no details can be distinguished: when the tone being captured exceeds the range in bright areas, these tones appear as pure white, and when the tone being captured does not meet the minimum threshold, these tones appear as pure black. Images captured with non-HDR cameras that have a limited exposure range (low dynamic range, LDR), may lose detail in highlights or shadows. Modern CMOS image sensors have improved dynamic range and can often capture a wider range of tones in a single exposure reducing the need to perform multi-exposure HDR. Color film negatives and slides consist of multiple film layers that respond to light differently. Original film (especially negatives versus transparencies or slides) feature a very high dynamic range (in the order of 8 for negatives and 4 to 4.5 for positive transparencies). Multi-exposure HDR is used in photography and also in extreme dynamic range applications such as welding or automotive work. In security cameras the term "wide dynamic range" is used instead of HDR. === Limitations === A fast-moving subject, or camera movement between the multiple exposures, will generate a "ghost" effect or a staggered-blur strobe effect due to the merged images not being identical. Unless the subject is static and the camera mounted on a tripod there may be a tradeoff between extended dynamic range and sharpness. Sudden changes in the lighting conditions (strobed LED light) can also interfere with the desired results, by producing one or more HDR layers that do have the luminosity expected by an automated HDR system, though one might still be able to produce a reasonable HDR image manually in software by rearranging the image layers to merge in order of their actual luminosity. Because of the nonlinearity of some sensors image artifacts can be common. Camera characteristics such as gamma curves, sensor resolution, noise, photometric calibration and color calibration affect resulting high-dynamic-range images. == Process == High-dynamic-range photographs are generally composites of multiple standard dynamic range images, often captured using exposure bracketing. Afterwards, photo manipulation software merges the input files into a single HDR image, which is then also tone mapped in accordance with the limitations of the planned output or display. === Capturing multiple images (exposure bracketing) === Any camera that allows manual exposure control can perform multi-exposure HDR image capture, although one equipped with automatic exposure bracketing (AEB) facilitates the process. Some cameras have an AEB feature that spans a far greater dynamic range than others, from ±0.6 in simpler cameras to ±18 EV in top professional cameras, as of 2020. The exposure value (EV) refers to the amount of light applied to the light-sensitive detector, whether film or digital sensor such as a CCD. An increase or decrease of one stop is defined as a doubling or halving of the amount of light captured. Revealing detail in the darkest of shadows requires an increased EV, while preserving detail in very bright situations requires very low EVs. EV is controlled using one of two photographic controls: varying either the size of the aperture or the exposure time. A set of images with multiple EVs intended for HDR processing should be captured only by altering the exposure time; altering the aperture size also would affect the depth of field and so the resultant multiple images would be quite different, preventing their final combination into a single HDR image. Multi-exposure HDR photography generally is limited to still scenes because any movement between successive images will impede or prevent success in combining them afterward. Also, because the photographer must capture three or more images to obtain the desired luminance range, taking such a full set of images takes extra time. Photographers have developed calculation methods and techniques to partially overcome these problems, but the use of a sturdy tripod is advised to minimize framing differences between exposures. === Merging the images into an HDR image === Tonal information and details from shadow areas can be recovered from images that are deliberately overexposed (i.e., with positive EV compared to the correct scene exposure), while similar tonal information from highlight areas can be recovered from images that are deliberately underexposed (negative EV). The process of selecting and extracting shadow and highlight information from these over/underexposed images and then combining them with image(s) that are exposed correctly for the overall scene is known as exposure fusion. Exposure fusion can be performed manually, relying on the HDR operator's judgment, experience, and training, but usually, fusion is performed automatically by software. === Storing === Information stored in high-dynamic-range images typically corresponds to the physical values of luminance or radiance that can be observed in the real world. This is different from traditional digital images, which represent colors as they should appear on a monitor or a paper print. Therefore, HDR image formats are often called scene-referred, in contrast to traditional digital images, which are device-referred or output-referred. Furthermore, traditional images are usually encoded for the human visual system (maximizing the visual information stored in the fixed number of bits), which is usually called gamma encoding or gamma correction. The values stored for HDR images are often gamma compressed using mathematical functions such as power laws logarithms, or floating point linear values, since fixed-point linear encodings are increasingly inefficient over higher dynamic ranges. HDR images often do not use fixed ranges per color channel, other than traditional images, to represent many more colors over a much wi

  Read more →
• 

  Rapid application development

  Rapid application development (RAD), also called rapid application building (RAB), is both a general term for adaptive software development approaches, and the name for James Martin's method of rapid development. In general, RAD approaches to software development put less emphasis on planning and more emphasis on an adaptive process. Prototypes are often used in addition to or sometimes even instead of design specifications. RAD is especially well suited for (although not limited to) developing software that is driven by user interface requirements. Graphical user interface builders are often called rapid application development tools. Other approaches to rapid development include the adaptive, agile, spiral, and unified models. == History == Rapid application development was a response to plan-driven waterfall processes, developed in the 1970s and 1980s, such as the Structured Systems Analysis and Design Method (SSADM). One of the problems with these methods is that they were based on a traditional engineering model used to design and build things like bridges and buildings. Software is an inherently different kind of artifact. Software can change the process used to solve a problem. As a result, knowledge gained from the development process itself can feed back to the requirements and design of the solution. Plan-driven approaches attempt to define requirements, the solution, and the implementation plan, and have a process that discourages changes. RAD approaches, on the other hand, recognize that software development is a knowledge intensive process and provide flexible processes that help take advantage of knowledge gained during the project to improve or adapt the solution. The first such RAD alternative was developed by Barry Boehm and was known as the spiral model. Boehm and other subsequent RAD approaches emphasized developing prototypes as well as or instead of rigorous design specifications. Prototypes had several advantages over traditional specifications: Risk reduction. A prototype could test some of the most difficult potential parts of the system early on in the life-cycle. This can provide valuable information as to the feasibility of a design and can prevent the team from pursuing solutions that turn out to be too complex or time-consuming to implement. This benefit of finding problems earlier in the life-cycle rather than later was a key benefit of the RAD approach. The earlier a problem can be found the cheaper it is to address. Users are better at using and reacting than at creating specifications. In the waterfall model it was common for a user to sign off on a set of requirements but then when presented with an implemented system to suddenly realize that a given design lacked some critical features or was too complex. In general most users give much more useful feedback when they can experience a prototype of the running system rather than abstractly define what that system should be. Prototypes can be usable and can evolve into the completed product. One approach used in some RAD methods was to build the system as a series of prototypes that evolve from minimal functionality to moderately useful to the final completed system. The advantage of this besides the two advantages above was that the users could get useful business functionality much earlier in the process. Starting with the ideas of Barry Boehm and others, James Martin developed the rapid application development approach during the 1980s at IBM and finally formalized it by publishing a book in 1991, Rapid Application Development. This has resulted in some confusion over the term RAD even among IT professionals. It is important to distinguish between RAD as a general alternative to the waterfall model and RAD as the specific method created by Martin. The Martin method was tailored toward knowledge intensive and UI intensive business systems. These ideas were further developed and improved upon by RAD pioneers like James Kerr and Richard Hunter, who together wrote the seminal book on the subject, Inside RAD, which followed the journey of a RAD project manager as he drove and refined the RAD Methodology in real-time on an actual RAD project. These practitioners, and those like them, helped RAD gain popularity as an alternative to traditional systems project life cycle approaches. The RAD approach also matured during the period of peak interest in business re-engineering. The idea of business process re-engineering was to radically rethink core business processes such as sales and customer support with the new capabilities of Information Technology in mind. RAD was often an essential part of larger business re engineering programs. The rapid prototyping approach of RAD was a key tool to help users and analysts "think out of the box" about innovative ways that technology might radically reinvent a core business process. Much of James Martin's comfort with RAD stemmed from Dupont's Information Engineering division and its leader Scott Schultz and their respective relationships with John Underwood who headed up a bespoke RAD development company that pioneered many successful RAD projects in Australia and Hong Kong. Successful projects that included ANZ Bank, Lendlease, BHP, Coca-Cola Amatil, Alcan, Hong Kong Jockey Club and numerous others. Success that led to both Scott Shultz and James Martin both spending time in Australia with John Underwood to understand the methods and details of why Australia was disproportionately successful in implementing significant mission critical RAD projects. == James Martin approach == The James Martin approach to RAD divides the process into four distinct phases: Requirements planning phase – combines elements of the system planning and systems analysis phases of the systems development life cycle (SDLC). Users, managers, and IT staff members discuss and agree on business needs, project scope, constraints, and system requirements. It ends when the team agrees on the key issues and obtains management authorization to continue. User design phase – during this phase, users interact with systems analysts and develop models and prototypes that represent all system processes, inputs, and outputs. The RAD groups or subgroups typically use a combination of joint application design (JAD) techniques and CASE tools to translate user needs into working models. User design is a continuous interactive process that allows users to understand, modify, and eventually approve a working model of the system that meets their needs. Construction phase – focuses on program and application development task similar to the SDLC. In RAD, however, users continue to participate and can still suggest changes or improvements as actual screens or reports are developed. Its tasks are programming and application development, coding, unit-integration and system testing. Cutover phase – resembles the final tasks in the SDLC implementation phase, including data conversion, testing, changeover to the new system, and user training. Compared with traditional methods, the entire process is compressed. As a result, the new system is built, delivered, and placed in operation much sooner. == Advantages == In modern Information Technology environments, many systems are now built using some degree of Rapid Application Development (not necessarily the James Martin approach). In addition to Martin's method, agile methods and the Rational Unified Process are often used for RAD development. The purported advantages of RAD include: Better quality. By having users interact with evolving prototypes the business functionality from a RAD project can often be much higher than that achieved via a waterfall model. The software can be more usable and has a better chance to focus on business problems that are critical to end users rather than technical problems of interest to developers. However, this excludes other categories of what are usually known as Non-functional requirements (AKA constraints or quality attributes) including security and portability. Risk control. Although much of the literature on RAD focuses on speed and user involvement a critical feature of RAD done correctly is risk mitigation. It's worth remembering that Boehm initially characterized the spiral model as a risk based approach. A RAD approach can focus in early on the key risk factors and adjust to them based on empirical evidence collected in the early part of the process. E.g., the complexity of prototyping some of the most complex parts of the system. More projects completed on time and within budget. By focusing on the development of incremental units the chances for catastrophic failures that have dogged large waterfall projects is reduced. In the Waterfall model it was common to come to a realization after six months or more of analysis and development that required a radical rethinking of the entire system. With RAD this kind of information can be discovered and acted upon earlier in the proces

  Read more →
• 

  Color balance

  In photography and image processing, color balance is the global adjustment of the intensities of the colors (typically red, green, and blue primary colors). An important goal of this adjustment is to render specific colors – particularly neutral colors like white or grey – correctly. Hence, the general method is sometimes called gray balance, neutral balance, or white balance. Color balance changes the overall mixture of colors in an image and is used for color correction. Generalized versions of color balance are used to correct colors other than neutrals or to deliberately change them for effect. White balance is one of the most common kinds of balancing, and is when colors are adjusted to make a white object (such as a piece of paper or a wall) appear white and not a shade of any other colour. Image data acquired by sensors – either film or electronic image sensors – must be transformed from the acquired values to new values that are appropriate for color reproduction or display. Several aspects of the acquisition and display process make such color correction essential – including that the acquisition sensors do not match the sensors in the human eye, that the properties of the display medium must be accounted for, and that the ambient viewing conditions of the acquisition differ from the display viewing conditions. The color balance operations in popular image editing applications usually operate directly on the red, green, and blue channel pixel values, without respect to any color sensing or reproduction model. In film photography, color balance is typically achieved by using color correction filters over the lights or on the camera lens. == Generalized color balance == Sometimes the adjustment to keep neutrals neutral is called white balance, and the phrase color balance refers to the adjustment that in addition makes other colors in a displayed image appear to have the same general appearance as the colors in an original scene. It is particularly important that neutral (gray, neutral, white) colors in a scene appear neutral in the reproduction. === Psychological color balance === Humans relate to flesh tones more critically than other colors. Trees, grass and sky can all be off without concern, but if human flesh tones are 'off' then the human subject can look sick or dead. To address this critical color balance issue, the tri-color primaries themselves are formulated to not balance as a true neutral color. The purpose of this color primary imbalance is to more faithfully reproduce the flesh tones through the entire brightness range. == Illuminant estimation and adaptation == Most digital cameras have means to select color correction based on the type of scene lighting, using either manual lighting selection, automatic white balance, or custom white balance. The algorithms for these processes perform generalized chromatic adaptation. Many methods exist for color balancing. Setting a button on a camera is a way for the user to indicate to the processor the nature of the scene lighting. Another option on some cameras is a button which one may press when the camera is pointed at a gray card or other neutral colored object. This captures an image of the ambient light, which enables a digital camera to set the correct color balance for that light. There is a large literature on how one might estimate the ambient lighting from the camera data and then use this information to transform the image data. A variety of algorithms have been proposed, and the quality of these has been debated. A few examples and examination of the references therein will lead the reader to many others. Examples are Retinex, an artificial neural network or a Bayesian method. == Chromatic colors == Color balancing an image affects not only the neutrals, but other colors as well. An image that is not color balanced is said to have a color cast, as everything in the image appears to have been shifted towards one color. Color balancing may be thought in terms of removing this color cast. Color balance is also related to color constancy. Algorithms and techniques used to attain color constancy are frequently used for color balancing, as well. Color constancy is, in turn, related to chromatic adaptation. Conceptually, color balancing consists of two steps: first, determining the illuminant under which an image was captured; and second, scaling the components (e.g., R, G, and B) of the image or otherwise transforming the components so they conform to the viewing illuminant. Viggiano found that white balancing in the camera's native RGB color model tended to produce less color inconstancy (i.e., less distortion of the colors) than in monitor RGB for over 4000 hypothetical sets of camera sensitivities. This difference typically amounted to a factor of more than two in favor of camera RGB. This means that it is advantageous to get color balance right at the time an image is captured, rather than edit later on a monitor. If one must color balance later, balancing the raw image data will tend to produce less distortion of chromatic colors than balancing in monitor RGB. == Mathematics of color balance == Color balancing is sometimes performed on a three-component image (e.g., RGB) using a 3x3 matrix. This type of transformation is appropriate if the image was captured using the wrong white balance setting on a digital camera, or through a color filter. Changing the color balance of an image can improve classifier results on a trained ML model. === Scaling monitor R, G, and B === In principle, one wants to scale all relative luminances in an image so that objects which are believed to be neutral appear so. If, say, a surface with R = 240 {\displaystyle R=240} was believed to be a white object, and if 255 is the count which corresponds to white, one could multiply all red values by 255/240. Doing analogously for green and blue would result, at least in theory, in a color balanced image. In this type of transformation the 3x3 matrix is a diagonal matrix. [ R G B ] = [ 255 / R w ′ 0 0 0 255 / G w ′ 0 0 0 255 / B w ′ ] [ R ′ G ′ B ′ ] {\displaystyle \left[{\begin{array}{c}R\\G\\B\end{array}}\right]=\left[{\begin{array}{ccc}255/R'_{w}&0&0\\0&255/G'_{w}&0\\0&0&255/B'_{w}\end{array}}\right]\left[{\begin{array}{c}R'\\G'\\B'\end{array}}\right]} where R {\displaystyle R} , G {\displaystyle G} , and B {\displaystyle B} are the color balanced red, green, and blue components of a pixel in the image; R ′ {\displaystyle R'} , G ′ {\displaystyle G'} , and B ′ {\displaystyle B'} are the red, green, and blue components of the image before color balancing, and R w ′ {\displaystyle R'_{w}} , G w ′ {\displaystyle G'_{w}} , and B w ′ {\displaystyle B'_{w}} are the red, green, and blue components of a pixel which is believed to be a white surface in the image before color balancing. This is a simple scaling of the red, green, and blue channels, and is why color balance tools in Photoshop have a white eyedropper tool. It has been demonstrated that performing the white balancing in the phosphor set assumed by sRGB tends to produce large errors in chromatic colors, even though it can render the neutral surfaces perfectly neutral. === Scaling X, Y, Z === If the image may be transformed into CIE XYZ tristimulus values, the color balancing may be performed there. This has been termed a "wrong von Kries" transformation. Although it has been demonstrated to offer usually poorer results than balancing in monitor RGB, it is mentioned here as a bridge to other things. Mathematically, one computes: [ X Y Z ] = [ X w / X w ′ 0 0 0 Y w / Y w ′ 0 0 0 Z w / Z w ′ ] [ X ′ Y ′ Z ′ ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\left[{\begin{array}{ccc}X_{w}/X'_{w}&0&0\\0&Y_{w}/Y'_{w}&0\\0&0&Z_{w}/Z'_{w}\end{array}}\right]\left[{\begin{array}{c}X'\\Y'\\Z'\end{array}}\right]} where X {\displaystyle X} , Y {\displaystyle Y} , and Z {\displaystyle Z} are the color-balanced tristimulus values; X w {\displaystyle X_{w}} , Y w {\displaystyle Y_{w}} , and Z w {\displaystyle Z_{w}} are the tristimulus values of the viewing illuminant (the white point to which the image is being transformed to conform to); X w ′ {\displaystyle X'_{w}} , Y w ′ {\displaystyle Y'_{w}} , and Z w ′ {\displaystyle Z'_{w}} are the tristimulus values of an object believed to be white in the un-color-balanced image, and X ′ {\displaystyle X'} , Y ′ {\displaystyle Y'} , and Z ′ {\displaystyle Z'} are the tristimulus values of a pixel in the un-color-balanced image. If the tristimulus values of the monitor primaries are in a matrix P {\displaystyle \mathbf {P} } so that: [ X Y Z ] = P [ L R L G L B ] {\displaystyle \left[{\begin{array}{c}X\\Y\\Z\end{array}}\right]=\mathbf {P} \left[{\begin{array}{c}L_{R}\\L_{G}\\L_{B}\end{array}}\right]} where L R {\displaystyle L_{R}} , L G {\displaystyle L_{G}} , and L B {\displaystyle L_{B}} are the un-gamma corrected monitor RGB, one may use: [ L R L G L B ] = P − 1 [ X w / X w ′ 0 0

  Read more →
• 

  Amazon Elastic Compute Cloud

  Amazon Elastic Compute Cloud (EC2) is a part of Amazon's cloud-computing platform, Amazon Web Services (AWS), that allows users to rent virtual computers on which to run their own computer applications. EC2 encourages scalable deployment of applications by providing a web service through which a user can boot an Amazon Machine Image (AMI) to configure a virtual machine, which Amazon calls an "instance", containing any software desired. A user can create, launch, and terminate server-instances as needed, paying by the second for active servers – hence the term "elastic". EC2 provides users with control over the geographical location of instances that allows for latency optimization and high levels of redundancy. In November 2010, Amazon switched its own retail website platform to EC2 and AWS. == History == Amazon announced a limited public beta test of EC2 on August 25, 2006, offering access on a first-come, first-served basis. Amazon added two new instance types (Large and Extra-Large) on October 16, 2007. On May 29, 2008, two more types were added, High-CPU Medium and High-CPU Extra Large. There were twelve types of instances available. Amazon added three new features on March 27, 2008: static IP addresses, availability zones, and user-selectable kernels. On August 20, 2008, Amazon added Elastic Block Store (EBS). This provides persistent storage, a feature that had been lacking since the service was introduced. Amazon EC2 went into full production when it dropped the beta label on October 23, 2008. On the same day, Amazon announced the following features: a service level agreement for EC2, Microsoft Windows in beta form on EC2, Microsoft SQL Server in beta form on EC2, plans for an AWS management console, and plans for load balancing, autoscaling, and cloud monitoring services. These features were subsequently added on May 18, 2009. Amazon EC2 was developed mostly by a team in Cape Town, South Africa led by Chris Pinkham. Pinkham provided the initial architecture guidance for EC2 and then built the team and led the development of the project along with Willem van Biljon. == Instance types == Initially, EC2 used Xen virtualization exclusively. However, on November 6, 2017, Amazon announced the new C5 family of instances that were based on a custom architecture around the KVM hypervisor, called Nitro. Each virtual machine, called an "instance", functions as a virtual private server. Amazon sizes instances based on "Elastic Compute Units". The performance of otherwise identical virtual machines may vary. On November 28, 2017, AWS announced a bare-metal instance, a departure from exclusively offering virtualized instance types. As of January 2019, the following instance types were offered: General Purpose: A1, T3, T2, M5, M5a, M4, T3a Compute Optimized: C5, C5n, C4 Memory Optimized: R5, R5a, R4, X1e, X1, High Memory, z1d Accelerated Computing: P3, P2, G3, F1 Storage Optimized: H1, I3, D2 As of April 2018, the following payment methods by instance were offered: On-demand: pay by the hour without commitment. Reserved: rent instances with one-time payment receiving discounts on the hourly charge. Spot: bid-based service: runs the jobs only if the spot price is below the bid specified by bidder. The spot price is claimed to be supply-demand based, however a 2011 study concluded that the price was generally not set to clear the market, but was dominated by an undisclosed reserve price. In 2025, AWS expanded EC2 with the compute-optimized C8gn family, powered by Graviton4 and offering up to 600 Gbit/s network bandwidth (about 30% higher compute performance than C7gn), and introduced G6f fractional-GPU instances that let customers provision one-eighth, one-quarter, or one-half of an NVIDIA L4 GPU for right-sized graphics/ML workloads. === Cost === As of April 2018, Amazon charged about $0.0058 per hour ($4.176 per month) for the smallest "Nano Instance" (t2.nano) virtual machine running Linux or Windows. Storage-optimized instances cost as much as $4.992 per hour (i3.16xlarge). "Reserved" instances can go as low as $2.50 per month for a three-year prepaid plan. The data transfer charge ranges from free to $0.12 per gigabyte, depending on the direction and monthly volume (inbound data transfer is free on all AWS services). EC2 costs can be analyzed using the Amazon Cost and Usage Report. There are many different cost categories for EC2 including: hourly Instance Charges, Data Transfer, EBS Volumes, EBS Volume Snapshots, and Nat Gateway. === Free tier === As of December 2010 Amazon offered a bundle of free resource credits to new account holders. The credits are designed to run a "micro" sized server, storage (EBS), and bandwidth for one year. Unused credits cannot be carried over from one month to the next. === Reserved instances === Reserved instances enable EC2 or RDS service users to reserve an instance for one or three years. The corresponding hourly rate charged by Amazon to operate the instance is 35 to 75% lower than the rate charged for on-demand instances. Reserved instances can be purchased with three different payment options: All Upfront, Partial Upfront and No Upfront. The different purchase options allow for different structuring of payment models, with a larger discount given to customers that pay their reservation upfront. Reserved Instances are purchased based on a resource commitment. These reservations are made based on an instance type and a count of that instance type. For example, you could reserve 100 i3.large instances for a 3-year term. In September 2016, AWS announced several enhancements to Reserved instances, introducing a new feature called scope and a new reservation type called a Convertible. In October 2017, AWS announced the allowance to subdivide the instances purchased for more flexibility. === Spot instances === Cloud providers maintain large amounts of excess capacity they have to sell or risk incurring losses. Amazon EC2 Spot instances are spare compute capacity in the AWS cloud available at up to 90% discount compared to On-Demand prices. As a trade-off, AWS offers no SLA on these instances and customers take the risk that it can be interrupted with only two minutes of notification when Amazon needs the capacity back. Researchers from the Israeli Institute of Technology found that "they (Spot instances) are typically generated at random from within a tight price interval via a dynamic hidden reserve price". Some companies, like Spotinst, are using machine learning to predict spot interruptions up to 15 minutes in advance. === Savings Plans === In November 2019, Amazon announced Savings Plans. Savings Plans are an alternative to Reserved Instances that come in two different plan types: Compute Savings Plans and EC2 Instances Savings Plans. Compute Savings Plans allow an organization to commit to EC2 and Fargate usage with the freedom to change region, family, size, availability zone, OS and tenancy inside the lifespan of the commitment. EC2 Instance Savings plans provide a larger discount than Compute Savings Plans but are less flexible meaning a user must commit to individual instance families within a region to take advantage, but with the freedom to change instances within the family in that region. AWS uses the Cost Explorer to automatically calculate recommendations for the commitments you should make how that commitment will look like as a monthly charge on your AWS bill. AWS Savings Plans are purchased based on hourly spend commitment. This hourly commitment is made using the discounted pricing of the savings plan you are purchasing. For example, you could commit to spending $5 per hour, on a Compute Savings Plan, for a 3-year term. == Features == === Operating systems === When it launched in August 2006, the EC2 service offered Linux and later Sun Microsystems' OpenSolaris and Solaris Express Community Edition. In October 2008, EC2 added the Windows Server 2003 and Windows Server 2008 operating systems to the list of available operating systems. In March 2011, NetBSD AMIs became available. In November 2012, Windows Server 2012 support was added. Since 2006, Colin Percival, a FreeBSD developer and Security Officer, solicited Amazon to add FreeBSD. In November 2012, Amazon officially supported running FreeBSD in EC2. The FreeBSD/EC2 platform is maintained by Percival who also developed the secure deduplicating Amazon S3-cloud based backup service Tarsnap. Amazon has their own Linux distribution based on Fedora and Red Hat Enterprise Linux as a low cost offering known as the Amazon Linux AMI. Version 2013.03 included: Linux kernel, Java OpenJDK Runtime Environment and GNU Compiler Collection. On November 30, 2020, Amazon announced that it would be adding macOS to the EC2 service. Initial support was announced for macOS Mojave and macOS Catalina running on Mac Mini. === Managed Container and Kubernetes Services === Amazon Elastic Container Registry (ECR) is a Docker registry service for Amazon EC2

  Read more →
• 

  Z-order

  Z-order is an ordering of overlapping two-dimensional objects, such as windows in a stacking window manager, shapes in a vector graphics editor, or objects in a 3D application. One of the features of a typical GUI is that windows may overlap, so that one window hides part or all of another. When two windows overlap, their Z-order determines which one appears on top of the other. == Definition == The term "Z-order" refers to the order of objects along the Z-axis. In coordinate geometry, X typically refers to the horizontal axis (left to right), Y to the vertical axis (up and down), and Z refers to the axis perpendicular to the other two (forward or backward). One can think of the windows in a GUI as a series of planes parallel to the surface of the monitor. The windows are therefore stacked along the Z-axis, and the Z-order information thus specifies the front-to-back ordering of the windows on the screen. An analogy would be some sheets of paper scattered on top of a table, each sheet being a window, the table your computer screen, and the top sheet having the highest Z value. == Use == Typically, users of a GUI can affect the Z-order by selecting a window to be brought to the foreground (that is, "above" or "in front of" all the other windows). Some window managers allow interaction with windows while they are not in the foreground, while others will bring a window to the front whenever it receives input from the user. It is also possible for special windows to be designated "always on top"; these are then fixed to the top of the Z-order so that (with few exceptions) no other window can overlap them. When dealing with visual objects on a computer screen, an object with a Z-order of 1 would be visually "underneath" an object with a Z-order of 2 or greater. This is the same as making "layers" of objects where the Z-order determines what object is on top of another. An HTML page can use CSS to specify the Z-order so that some objects can be layered over others. Z-ordering is also used in 3D applications to determine object visibility based on overlap from other objects. This confers a speed advantage to the user as the computer does not need to render unseen objects. In practice, of course, some objects may be only partially obscured, and this is a complication that must be taken into account. In early real-time 3D graphics, Z-order was applied on a per-polygon basis to avoid using Z-buffer, which was considered expensive at the time. In modern 3D graphics, Z-order is used for order-dependent rendering, for example with semi-transparent objects. It can also be used to reduce the problem of Z-fighting, by either rendering farther objects first and then using weak inequality as the depth test or, conversely, rendering front-to-back and using strict inequality. == z-index == The actual number assigned to a particular place in the Z-order is sometimes known as the z-index. In particular the CSS property that sets the stack order of specific elements is known as the z-index. An element with greater stack order is always in front of another element with lower stack order. Negative values can also be used in the same manner. A negative value will appear behind a positive one. z-index only works on elements that have a position value (e.g. position: relative;) and for many coders, this one of the first things to investigate when debugging why the z-index isn't working. Like all other CSS properties, it can be set with JavaScript, with the following syntax:

  Read more →
• 

  SurveyLab

  SurveyLab is an online system designed for creating and deploying surveys, questionnaires, web forms, tests, and quizzes. The platform functions as a web application, without the need for additional software installation. Founded in 2006, by the Polish company 7 Points, SurveyLab is used by businesses and professional users for market research, human resources assessments, customer feedback, and academic research. == History == SurveyLab was launched in 2006 under the name MySurveyLab, developed by the Warsaw-based company 7 Points. Early media coverage described the system as supporting online survey creation, real-time reporting, group collaboration and question logic, and noted that the platform was opened to custom feature development. MySurveyLab featured multi-user accounts, SSL-secured surveys, and support for right-to-left languages. Further 2010s updates improved reporting capabilities, expanded question types, and integration options. In 2020, the platform was rebranded to SurveyLab. By the early 2020s, the software supported integrations with external tools including Zapier, and offered additional analytics features. In 2025, 7 Points reported that SurveyLab had over 85,000 registered users and had processed over 7 million surveys. == Functionalities == SurveyLab is a web-based platform used for creating online surveys, questionnaires, and forms. Independent reviewers and software directories describe it as a tool used for market research, customer feedback management, and human resources-related assessments, including employee feedback surveys. According to the creators at 7 Points, SurveyLab supports customer satisfaction measurement, survey analysis, and 360-degree feedback evaluations. The platform allows users to create surveys with no limits on the number of questions or responses. Independent reviews describe SurveyLab as offering multiple-choice, matrix, rating-scale, and open-ended questions. According to 7 Points, the platform manages market-research workflows, including Net Promoter Score, Customer Satisfaction, and Customer Effort Score questions. The tool can also re-use previous answers in later questions, and create A/B survey variants. SurveyLab can integrate with external services and applications through APIs and third-party connectors. According to its developers, the platform can connect with customer service tools, as well as CRM, marketing automation, e-commerce, and data-storage tools An industry review cited workflow integrations with CINT, Slack, Salesforce, and Zendesk Other integrations included Aquera (SSO), Sona Systems (internet research), and Synerise (customer data management). == Data collection and aggregation == Independent descriptions note that SurveyLab can combine results from emails, SMS, website widgets and pop-ups, QR codes, and social media. Its surveys are also accessible through mobile apps on iOS and Android, used for online and offline data collection in the field. Developers state that the tool supports exporting data as CSV, Excel, and SPSS, with independent reviews also mentioning PDF and PowerPoint. SurveyLab can automate response collection through a multi-channel survey distribution and reporting. It includes data trends, offline responses, and reminders to non-respondents. According to its documentation, newer versions include AI-based tools that detect and analyze sentiment, and a survey builder generating questionnaires based on user prompts. === Data security and compliance === According to 7 Points, SurveyLab provides password-protected surveys, token-based access, IP-address filtering, and two-factor authentication for user accounts, and it complies with the General Data Protection Regulation. == Awards and accolades == In 2017, SurveyLab was listed in Capterra’s Top 20 Survey Software ranking, among 20 highest-scoring survey tools based on market presence and user base. In 2018, a software review platform FinancesOnline awarded SurveyLab the Rising Star Award and the Great User Experience Award, distinctions given to products that demonstrate positive user satisfaction and strong usability characteristics.

  Read more →
• 

  ISPConfig

  ISPConfig is an open source hosting control panel for Linux, licensed under BSD license and developed by the company ISPConfig UG. The ISPConfig project was started in autumn 2005 by Till Brehm from the German company projektfarm GmbH. == Overview == Using the dashboard, administrators have the ability to manage websites, email addresses, MySQL and MariaDB as well as PostgreSQL (since version 3.3) databases, FTP accounts, Shell accounts and DNS records through a web-based interface. The software has 4 login levels: administrator, reseller, client, and email-user, each with a different set of permissions. == Operating Systems == ISPConfig is only available on Linux, with CentOS, Debian, and Ubuntu being among the supported distributions. == Features == The following services and features are supported: Management of a single or multiple servers from one control panel. Web server management for Apache HTTP Server and Nginx. Mail server management (with virtual mail users) with spam and antivirus filter using Postfix (software) and Dovecot (software). DNS server management (BIND, Powerdns). Configuration mirroring and clusters. Administrator, reseller, client and mail-user login. Virtual server management for OpenVZ Servers. Website statistics using Webalizer and AWStats

  Read more →
• 

  Toggl Track

  Toggl Track (formerly Toggl) is a time tracking software developed by Toggl OÜ which is headquartered in Tallinn, Estonia. The company offers online time tracking and reporting services through their website along with mobile and desktop applications. Time can be tracked through a start/stop button, manual entry, or dragging and resizing time blocks in a calendar view. == History == According to Alari Aho, Toggl's CEO and founder, the application has been fully self-funded from the start. The name was created using a random name generator.

  Read more →
• 

  Pyramid (image processing)

  Pyramid, or pyramid representation, is a type of multi-scale signal representation developed by the computer vision, image processing and signal processing communities, in which a signal or an image is subject to repeated smoothing and subsampling. Pyramid representation is a predecessor to scale-space representation and multiresolution analysis. == Pyramid generation == There are two main types of pyramids: lowpass and bandpass. A lowpass pyramid is made by smoothing the image with an appropriate smoothing filter and then subsampling the smoothed image, usually by a factor of 2 along each coordinate direction. The resulting image is then subjected to the same procedure, and the cycle is repeated multiple times. Each cycle of this process results in a smaller image with increased smoothing, but with decreased spatial sampling density (that is, decreased image resolution). If illustrated graphically, the entire multi-scale representation will look like a pyramid, with the original image on the bottom and each cycle's resulting smaller image stacked one atop the other. A bandpass pyramid is made by forming the difference between images at adjacent levels in the pyramid and performing image interpolation between adjacent levels of resolution, to enable computation of pixelwise differences. == Pyramid generation kernels == A variety of different smoothing kernels have been proposed for generating pyramids. Among the suggestions that have been given, the binomial kernels arising from the binomial coefficients stand out as a particularly useful and theoretically well-founded class. Thus, given a two-dimensional image, we may apply the (normalized) binomial filter (1/4, 1/2, 1/4) typically twice or more along each spatial dimension and then subsample the image by a factor of two. This operation may then proceed as many times as desired, leading to a compact and efficient multi-scale representation. If motivated by specific requirements, intermediate scale levels may also be generated where the subsampling stage is sometimes left out, leading to an oversampled or hybrid pyramid. With the increasing computational efficiency of CPUs available today, it is in some situations also feasible to use wider supported Gaussian filters as smoothing kernels in the pyramid generation steps. === Gaussian pyramid === In a Gaussian pyramid, subsequent images are weighted down using a Gaussian average (Gaussian blur) and scaled down. Each pixel containing a local average corresponds to a neighborhood pixel on a lower level of the pyramid. This technique is used especially in texture synthesis. === Laplacian pyramid === A Laplacian pyramid is very similar to a Gaussian pyramid but saves the difference image of the blurred versions between each levels. Only the smallest level is not a difference image to enable reconstruction of the high resolution image using the difference images on higher levels. This technique can be used in image compression. === Steerable pyramid === A steerable pyramid, developed by Simoncelli and others, is an implementation of a multi-scale, multi-orientation band-pass filter bank used for applications including image compression, texture synthesis, and object recognition. It can be thought of as an orientation selective version of a Laplacian pyramid, in which a bank of steerable filters are used at each level of the pyramid instead of a single Laplacian or Gaussian filter. == Applications of pyramids == === Alternative representation === In the early days of computer vision, pyramids were used as the main type of multi-scale representation for computing multi-scale image features from real-world image data. More recent techniques include scale-space representation, which has been popular among some researchers due to its theoretical foundation, the ability to decouple the subsampling stage from the multi-scale representation, the more powerful tools for theoretical analysis as well as the ability to compute a representation at any desired scale, thus avoiding the algorithmic problems of relating image representations at different resolution. Nevertheless, pyramids are still frequently used for expressing computationally efficient approximations to scale-space representation. === Detail manipulation === Levels of a Laplacian pyramid can be added to or removed from the original image to amplify or reduce detail at different scales. However, detail manipulation of this form is known to produce halo artifacts in many cases, leading to the development of alternatives such as the bilateral filter. Some image compression file formats use the Adam7 algorithm or some other interlacing technique. These can be seen as a kind of image pyramid. Because those file format store the "large-scale" features first, and fine-grain details later in the file, a particular viewer displaying a small "thumbnail" or on a small screen can quickly download just enough of the image to display it in the available pixels—so one file can support many viewer resolutions, rather than having to store or generate a different file for each resolution.

  Read more →
• 

  Cryptee

  Cryptee is a privacy focused client-side encrypted and cross-platform productivity suite and data storage service. == History == Cryptee was founded in 2017, by John Ozbay, a cybersecurity researcher, commenter, and activist, to exclusively focus on providing a secure document editing service similar to Google Docs and Photos for everyone, with a particular focus on victims and survivors of domestic abuse, journalists and reporters. == Software == Users can write personal documents, notes, journals, store images, videos, and various kinds of other files. The source code of Cryptee is open source and publicly available to allow anyone to audit the service with ease, and help identify errors or potential vulnerabilities in a public and transparent manner. Cryptee has a few key features that differentiate it from other services in the industry, such as its Ghost Folders and Ghost Albums features, built specifically with victims and survivors of domestic abuse, journalists and reporters in mind. Cryptee allows users to hide (ghost) folders for plausible deniability also as known as deniable encryption in the field of cryptography and steganography, and ensure privacy even under coercion. === Features === Cryptee Docs' features include: To-do lists, Markdown support, KaTeX math and file attachments. cross-platform accessible, as it is a progressive web app. Bulk transfer from other note taking apps such as Evernote. Encrypted PDF and print-accurate (A4 and U.S. Letter paper-sized) text editing. Ability to edit docx files Cryptee Photos' features include: Ability to create slideshows. Ability to store original quality of photos. Ability to tag photos for organization. === Commercial strategy === The company's commercial strategy is focused on offering to its users an open source and transparent Photo Storage, Document Editor and Cloud Storage services without trackers or advertisements as it seeks to compete with Google Docs, Google Photos and similar services through its offerings. === Privacy === Cryptee utilizes zero-access storage to safe-keep all users' sensitive digital belongings. == Advocacy == === Lockdown mode === In July 2022, to fortify iPhones against the Pegasus Spyware, Apple announced a new, upcoming Lockdown Mode feature in iOS 16, welcomed by many experts. In the following weeks after Apple's announcement, in August 2022, the Founder and CEO of Cryptee, and privacy activist John Ozbay published their research detailing shortcoming of Apple's Lockdown Mode. They demonstrated that enabling Lockdown Mode makes it possible for all websites and online ads to be able to detect if users have Lockdown Mode enabled or not. This was due to the fact that disabling web fonts (an attack surface) was detectable by websites. === Confrontations against Apple === ==== On PWAs ==== In February 2024, Apple announced plans to kill progressive web apps on iOS devices in the EU, claiming it was to comply with the Digital Markets Act (DMA). The announcement was criticized as anti-competitive by many in the tech industry, including by Tim Sweeney, the CEO of Epic Games. In response, Cryptee started working together with Open Web Advocacy (OWA), an international not-for-profit digital rights group to advocate for the future of the open web, promote web browser choice on mobile operating systems through challenging Apple's anti-competitive third party browser engine ban, and to champion the use and equality of progressive web apps over native apps, by reaching out to the European Union's Digital Markets Act (DMA) team. To better understand the consequences of Apple's decision to kill web apps, the EU announced that they "seek to investigate Apple over cutting off web apps", and that they sent "requests for information to Apple and to app developers, who can provide useful information for our assessment". Apart from sending a response to the EU, Cryptee, along with the OWA, launched an open letter to Tim Cook, which in 48 hours, got thousands of signatories including European Parliament Members Karen Melchior and Patrick Breyer; and thousands of other developers and organizations from over 100 countries. Consequently, 24 hours later, Apple backed off, and reversed course on its plan to cut off progressive web apps in the EU. ==== Ozbay's representations ==== Following the events, eventually on March 18, 2024, Founder and CEO of Cryptee John Ozbay represented the Open Web Advocacy group in European Union's Digital Markets Act (DMA) hearing for Apple. At the hearing, OWA confronted Apple, accused Apple of "maliciously intending to undermine user choice", and stated that there was no defense for Apple's behavior. In response, according to the tech news outlet Ars Technica, Apple's spokesperson "seemed to dodge Ozbay's question". ==== Cooperation with the EU ==== Within a week of the hearing, the European Union announced a DMA non-compliance investigation against Apple and United States' Department of Justice filed an antitrust lawsuit against Apple. A few months later, on June 27, 2024, Cryptee, in cooperation with EDRi — an international advocacy group, along with Article 19 — a British international human rights organization, Privacy International, F-Droid, Free Software Foundation Europe, Guardian Project and others have submitted a comprehensive analysis to the European Commission about how Apple's plans to comply with the Digital Markets Act are insufficient. == Reviews == In a 2018 article, Wall Street Journal's MarketWatch reviewed Cryptee, articulating the fact that Cryptee offers zero-access storage for photos, files, documents and notes, and pointed out that: "Being based in Estonia puts Cryptee outside the “14 eyes jurisdiction,” an international surveillance alliance of European Union and North American countries, making it less likely it will be targeted with demands for data". In addition, the review highlighted Cryptee's Ghost Folders feature which ensures privacy even under coercion. In a 2019 article, Reclaim The Net named Cryptee as one of the "5 great privacy-focused Evernote alternatives to keep your notes safe", underlining that: "When it comes to security, this app is state of the art." and that "When making this app, the developers thought about every aspect of security and have taken every precaution to make it as secure as possible.". The review further underscored Cryptee's open-source nature, its strong encryption, and easy migration features. In a 2021 article, The Verge reviewed Cryptee, pointing out that Cryptee, based out of Europe, is one of the main photo storage service alternatives to Google Photos, and that it's their recommendation for users who are "concerned about privacy and like the idea of encryption" as Cryptee "offers to keep all your photos encrypted using AES-256". In a 2024 article, Beebom, enlisted Cryptee as one of the "7 best iCloud Photos Alternatives for iPhone and iPad", complimenting Cryptee's simplicity, its use of encryption to safeguard users' photos against hacking by not storing any unencrypted data. The article also provided further attention to Cryptee's additional features such as such as Ghost Albums, slideshows, easy-to-use drag and drop uploads, tagging and users' ability to store original-quality photos on Cryptee, concluding that Cryptee is "a safe bet if you are on the lookout for a privacy-centric iCloud Photos alternative".

  Read more →
• 

  Circular thresholding

  Circular thresholding is an algorithm for automatic image threshold selection in image processing. Most threshold selection algorithms assume that the values (e.g. intensities) lie on a linear scale. However, some quantities such as hue and orientation are a circular quantity, and therefore require circular thresholding algorithms. The example shows that the standard linear version of Otsu's method when applied to the hue channel of an image of blood cells fails to correctly segment the large white blood cells (leukocytes). In contrast the white blood cells are correctly segmented by the circular version of Otsu's method. == Methods == There are a relatively small number of circular image threshold selection algorithms. The following examples are all based on Otsu's method for linear histograms: (Tseng, Li and Tung 1995) smooth the circular histogram, and apply Otsu's method. The histogram is cyclically rotated so that the selected threshold is shifted to zero. Otsu's method and histogram rotation are applied iteratively until several heuristics involving class size, threshold location, and class variance are satisfied. (Wu et al. 2006) smooth the circular histogram until it contains only two peaks. The histogram is cyclically rotated so that the midpoint between the peaks is shifted to zero. Otsu's method and histogram rotation are applied iteratively until convergence of the threshold. (Lai and Rosin 2014) applied Otsu's method to the circular histogram. For the two class circular thresholding task they showed that, for a histogram with an even number of bins, the optimal solution for Otsu's criterion of within-class variance is obtained when the histogram is split into two halves. Therefore the optimal solution can be efficiently obtained in linear rather than quadratic time. == References and further reading == D.-C. Tseng, Y.-F. Li, and C.-T. Tung, Circular histogram thresholding for color image segmentation in Proc. Int. Conf. Document Anal. Recognit., 1995, pp. 673–676. J. Wu, P. Zeng, Y. Zhou, and C. Olivier, A novel color image segmentation method and its application to white blood cell image analysis in Proc. Int. Conf. Signal Process., vol. 2. 2006, pp. 16–20. Y.K. Lai, P.L. Rosin, Efficient Circular Thresholding, IEEE Trans. on Image Processing 23(3), 992–1001 (2014). doi:10.1109/TIP.2013.2297014

  Read more →
• 

  Toolchain

  A toolchain is a set of software development tools used to build and otherwise develop software. Often, the tools are executed sequentially and form a pipeline such that the output of one tool is the input for the next. Sometimes the term is used for a set of related tools that are not necessarily executed sequentially. A relatively common and simple toolchain consists of the tools to build for a particular operating system (OS) and CPU architecture: a compiler, a linker, and a debugger. With a cross-compiler, a toolchain can support cross-platform development. For building more complex software systems, many other tools may be in the toolchain. For example, for a video game, the toolchain may include tools for preparing sound effects, music, textures, 3-dimensional models and animations, and for combining these resources into the finished product.

  Read more →
• 

  Picture Prowler

  Picture Prowler was an early piece of photo management software developed around and meant to show off Xing Technology's JPEG image decompression library during the early 1990s. Little known today, it featured thumbnail based picture management, printing, etc. The primary developer was Ray Bunnage from compression / decompression libraries developed by Howard Gordon and Chris Eddy.

  Read more →
• 

  Limnu

  Limnu was an online whiteboarding app founded in 2015 by David DeBry and David Hart. It allowed users to draw on virtual whiteboards and invite others by e-mail or by sharing a link. Invitees see any changes to the board in real time and, if allowed by the owner of the board, can also draw on the board. The service was accessible through a web application in desktop and mobile web browsers, as well as through an iOS application. It was headquartered in San Mateo, California. == History == In 2018, ZipSocket, a maker of online meeting software acquired Limnu. == Staff Directory == Andrew Kunz - CEO & Founder of ZipSocket Jenny Rice - Product Manager Max Requenes - Software Engineer Henry Maguire - Machine Learning Engineer

  Read more →
• 

  Content Disarm and Reconstruction

  Content Disarm and Reconstruction (CDR) is a computer security technology for removing potentially malicious code from files. Unlike malware analysis, CDR technology does not determine or detect malware's functionality but removes all file components that are not approved within the system's definitions and policies. It is used to prevent cyber security threats from entering a corporate network perimeter. Channels that CDR can be used to protect include email and website traffic. Advanced solutions can also provide similar protection on computer endpoints, or cloud email and file sharing services. There are three levels of CDR; 1) flattening and converting the original file to a PDF, 2) stripping active content while keeping the original file type, and 3) eliminating all file-borne risk while maintaining file type, integrity and active content. Beyond these three levels, there are also more advanced forms of CDR that is able to perform "soft conversion" and "hard conversion", based on the user's preference in balancing usability and security. == Applications == CDR works by processing all incoming files of an enterprise network, deconstructing them, and removing the elements that do not match the file type's standards or set policies. CDR technology then rebuilds the files into clean versions that can be sent on to end users as intended. Because CDR removes all potentially malicious code, it can be effective against zero-day vulnerabilities that rely on being an unknown threat that other security technologies would need to patch against to maintain protection. CDR can be used to prevent cyber threats from variety of sources: Email Data Diodes Web Browsers Endpoints File Servers FTP Cloud email or webmail programs SMB/CIFS Removable media scanning (CDR Kiosk) CDR can be applied to a variety of file formats including: Images Office documents PDF Audio/video file formats Archives HTML == Open source implementations == DocBleach ExeFilter

  Read more →