AI Assistant Picture

AI Assistant Picture — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Application performance engineering

  Application performance engineering is a method to develop and test application performance in various settings, including mobile computing, the cloud, and conventional information technology (IT). == Methodology == According to the American National Institute of Standards and Technology, nearly four out of every five dollars spent on the total cost of ownership of an application is directly attributable to finding and fixing issues post-deployment. A full one-third of this cost could be avoided with better software testing. Application performance engineering attempts to test software before it is published. While practices vary among organizations, the method attempts to emulate the real-world conditions that software in development will confront, including network deployment and access by mobile devices. Techniques include network virtualization.

  Read more →
• 

  List of network buses

  List of electrical characteristics of single collision domain segment "slow speed" network buses: The number of nodes can be limited by either number of available addresses or bus capacitance. None of the above use any analog domain modulation techniques like MLT-3 encoding, PAM-5 etc. PSI5 designed with automation applications in mind is a bit unusual in that it uses Manchester code.

  Read more →
• 

  InfiniBand

  InfiniBand (IB) is a computer networking standard used in high-performance computing that features very high throughput and very low latency. It is used for data interconnect both among and within computers. InfiniBand is also used as either a direct or switched interconnect between servers and storage systems, as well as an interconnect between storage systems. It is designed to be scalable and uses a switched fabric network topology. Between 2014 and June 2016, it was the most commonly used interconnect in the TOP500 list of supercomputers. Mellanox (acquired by Nvidia) manufactures InfiniBand host bus adapters and network switches, which are used by large computer system and database vendors in their product lines. As a computer cluster interconnect, IB competes with Ethernet, Fibre Channel, and Intel Omni-Path. The technology is promoted by the InfiniBand Trade Association. == History == InfiniBand originated in 1999 from the merger of two competing designs: Future I/O and Next Generation I/O (NGIO). NGIO was led by Intel, with a specification released in 1998, and joined by Sun Microsystems and Dell. Future I/O was backed by Compaq, IBM, and Hewlett-Packard. This led to the formation of the InfiniBand Trade Association (IBTA), which included both sets of hardware vendors as well as software vendors such as Microsoft. At the time it was thought some of the more powerful computers were approaching the interconnect bottleneck of the PCI bus, in spite of upgrades like PCI-X. Version 1.0 of the InfiniBand Architecture Specification was released in 2000. Initially the IBTA vision for IB was simultaneously a replacement for PCI in I/O, Ethernet in the machine room, cluster interconnect and Fibre Channel. IBTA also envisaged decomposing server hardware on an IB fabric. Mellanox had been founded in 1999 to develop NGIO technology, but by 2001 shipped an InfiniBand product line called InfiniBridge at 10 Gbit/second speeds. Following the burst of the dot-com bubble there was hesitation in the industry to invest in such a far-reaching technology jump. By 2002, Intel announced that instead of shipping IB integrated circuits ("chips"), it would focus on developing PCI Express, and Microsoft discontinued IB development in favor of extending Ethernet. Sun Microsystems and Hitachi continued to support IB. In 2003, the System X supercomputer built at Virginia Tech used InfiniBand in what was estimated to be the third largest computer in the world at the time. The OpenIB Alliance (later renamed OpenFabrics Alliance) was founded in 2004 to develop an open set of software for the Linux kernel. By February, 2005, the support was accepted into the 2.6.11 Linux kernel. In November 2005 storage devices finally were released using InfiniBand from vendors such as Engenio. Cisco, desiring to keep technology superior to Ethernet off the market, adopted a "buy to kill" strategy. Cisco successfully killed InfiniBand switching companies such as Topspin via acquisition. Of the top 500 supercomputers in 2009, Gigabit Ethernet was the internal interconnect technology in 259 installations, compared with 181 using InfiniBand. In 2010, market leaders Mellanox and Voltaire merged, leaving just one other IB vendor, QLogic, primarily a Fibre Channel vendor. At the 2011 International Supercomputing Conference, links running at about 56 gigabits per second (known as FDR, see below), were announced and demonstrated by connecting booths in the trade show. In 2012, Intel acquired QLogic's InfiniBand technology, leaving only one independent supplier. By 2014, InfiniBand was the most popular internal connection technology for supercomputers, although within two years, 10 Gigabit Ethernet started displacing it. In 2016, it was reported that Oracle Corporation (an investor in Mellanox) might engineer its own InfiniBand hardware. In 2019 Nvidia acquired Mellanox, the last independent supplier of InfiniBand products. == Specification == Specifications are published by the InfiniBand trade association. === Performance === Original names for speeds were single-data rate (SDR), double-data rate (DDR) and quad-data rate (QDR) as given below. Subsequently, other three-letter initialisms were added for even higher data rates. Notes Each link is duplex. Links can be aggregated: most systems use a 4 link/lane connector (QSFP). HDR often makes use of 2x links (aka HDR100, 100 Gb link using 2 lanes of HDR, while still using a QSFP connector). NDR introduced OSFP connectors which host one or two links at 2x (NDR200) or 4x (NDR400). They are not logically configured as a single 8x link, even when connecting switches together with an OSFP cable. InfiniBand provides remote direct memory access (RDMA) capabilities for low CPU overhead. === Topology === InfiniBand uses a switched fabric topology, as opposed to early shared medium Ethernet. All transmissions begin or end at a channel adapter. Each processor contains a host channel adapter (HCA) and each peripheral has a target channel adapter (TCA). These adapters can also exchange information for security or quality of service (QoS). === Messages === InfiniBand transmits data in packets of up to 4 KB that are taken together to form a message. A message can be: a remote direct memory access read or write a channel send or receive a transaction-based operation (that can be reversed) a multicast transmission an atomic operation === Physical interconnection === In addition to a board form factor connection, it can use both active and passive copper (up to 10 meters) and optical fiber cable (up to 10 km). QSFP connectors are used. The InfiniBand Association also specified the CXP connector system for speeds up to 120 Gbit/s over copper, active optical cables, and optical transceivers using parallel multi-mode fiber cables with 24-fiber MPO connectors. === Software interfaces === Mellanox operating system support is available for Solaris, FreeBSD, Red Hat Enterprise Linux, SUSE Linux Enterprise Server (SLES), Windows, HP-UX, VMware ESX, and AIX. InfiniBand has no specific standard application programming interface (API). The standard only lists a set of verbs such as ibv_open_device or ibv_post_send, which are abstract representations of functions or methods that must exist. The syntax of these functions is left to the vendors. Sometimes for reference this is called the verbs API. The de facto standard software is developed by OpenFabrics Alliance and called the Open Fabrics Enterprise Distribution (OFED). It is released under two licenses GPL2 or BSD license for Linux and FreeBSD, and as Mellanox OFED for Windows (product names: WinOF / WinOF-2; attributed as host controller driver for matching specific ConnectX 3 to 5 devices) under a choice of BSD license for Windows. It has been adopted by most of the InfiniBand vendors, for Linux, FreeBSD, and Microsoft Windows. IBM refers to a software library called libibverbs, for its AIX operating system, as well as "AIX InfiniBand verbs". The Linux kernel support was integrated in 2005 into the kernel version 2.6.11. === Ethernet over InfiniBand === Ethernet over InfiniBand, abbreviated to EoIB, is an Ethernet implementation over the InfiniBand protocol and connector technology. EoIB enables multiple Ethernet bandwidths varying on the InfiniBand (IB) version. Ethernet's implementation of the Internet Protocol Suite, usually referred to as TCP/IP, is different in some details compared to the direct InfiniBand protocol in IP over IB (IPoIB).

  Read more →
• 

  G.9972

  G.9972 (also known as G.cx) is a Recommendation developed by ITU-T that specifies a coexistence mechanism for networking transceivers capable of operating over electrical power line wiring. It allows G.hn devices to coexist with other devices implementing G.9972 and operating on the same power line wiring. G.9972 received consent during the meeting of ITU-T Study Group 15, on October 9, 2009, and final approval on June 11, 2010. G.9972 specifies two mechanisms for coexistence between G.hn home networks and broadband over power lines (BPL) Internet access networks: Frequency-division multiplexing (FDM), in which the available spectrum is divided into two parts: frequencies below 10 or 14 MHz (specific value can be selected by the access network) are reserved for the access network, while frequencies above them are reserved for the in-home network. Time-division multiplexing (TDM), in which the available channel time is split equally between both networks. 50% of time slots are allocated for the access network, and 50% are allocated to the in-home network.

  Read more →
• 

  Decision tree pruning

  Pruning is a data compression technique in machine learning and search algorithms that reduces the size of decision trees by removing sections of the tree that are non-critical and redundant to classify instances. Pruning reduces the complexity of the final classifier, and hence improves predictive accuracy by the reduction of overfitting. One of the questions that arises in a decision tree algorithm is the optimal size of the final tree. A tree that is too large risks overfitting the training data and poorly generalizing to new samples. A small tree might not capture important structural information about the sample space. However, it is hard to tell when a tree algorithm should stop because it is impossible to tell if the addition of a single extra node will dramatically decrease error. This problem is known as the horizon effect. A common strategy is to grow the tree until each node contains a small number of instances then use pruning to remove nodes that do not provide additional information. Pruning should reduce the size of a learning tree without reducing predictive accuracy as measured by a cross-validation set. There are many techniques for tree pruning that differ in the measurement that is used to optimize performance. == Techniques == Pruning processes can be divided into two types (pre- and post-pruning). Pre-pruning procedures prevent a complete induction of the training set by replacing a stop () criterion in the induction algorithm (e.g. max. Tree depth or information gain (Attr)> minGain). Pre-pruning methods are considered to be more efficient because they do not induce an entire set, but rather trees remain small from the start. Prepruning methods share a common problem, the horizon effect. This is to be understood as the undesired premature termination of the induction by the stop () criterion. Post-pruning (or just pruning) is the most common way of simplifying trees. Here, nodes and subtrees are replaced with leaves to reduce complexity. Pruning can not only significantly reduce the size but also improve the classification accuracy of unseen objects. It may be the case that the accuracy of the assignment on the train set deteriorates, but the accuracy of the classification properties of the tree increases overall. The procedures are differentiated on the basis of their approach in the tree (top-down or bottom-up). === Bottom-up pruning === These procedures start at the last node in the tree (the lowest point). Following recursively upwards, they determine the relevance of each individual node. If the relevance for the classification is not given, the node is dropped or replaced by a leaf. The advantage is that no relevant sub-trees can be lost with this method. These methods include Reduced Error Pruning (REP), Minimum Cost Complexity Pruning (MCCP), or Minimum Error Pruning (MEP). === Top-down pruning === In contrast to the bottom-up method, this method starts at the root of the tree. Following the structure below, a relevance check is carried out which decides whether a node is relevant for the classification of all n items or not. By pruning the tree at an inner node, it can happen that an entire sub-tree (regardless of its relevance) is dropped. One of these representatives is pessimistic error pruning (PEP), which brings quite good results with unseen items. == Pruning algorithms == === Reduced error pruning === One of the simplest forms of pruning is reduced error pruning. Starting at the leaves, each node is replaced with its most popular class. If the prediction accuracy is not affected then the change is kept. While somewhat naive, reduced error pruning has the advantage of simplicity and speed. === Cost complexity pruning === Cost complexity pruning generates a series of trees ⁠ T 0 … T m {\displaystyle T_{0}\dots T_{m}} ⁠ where ⁠ T 0 {\displaystyle T_{0}} ⁠ is the initial tree and ⁠ T m {\displaystyle T_{m}} ⁠ is the root alone. At step ⁠ i {\displaystyle i} ⁠, the tree is created by removing a subtree from tree ⁠ i − 1 {\displaystyle i-1} ⁠ and replacing it with a leaf node with value chosen as in the tree building algorithm. The subtree that is removed is chosen as follows: Define the error rate of tree ⁠ T {\displaystyle T} ⁠ over data set ⁠ S {\displaystyle S} ⁠ as ⁠ err ⁡ ( T , S ) {\displaystyle \operatorname {err} (T,S)} ⁠. The subtree t {\displaystyle t} that minimizes err ⁡ ( prune ⁡ ( T , t ) , S ) − err ⁡ ( T , S ) | leaves ⁡ ( T ) | − | leaves ⁡ ( prune ⁡ ( T , t ) ) | {\displaystyle {\frac {\operatorname {err} (\operatorname {prune} (T,t),S)-\operatorname {err} (T,S)}{\left\vert \operatorname {leaves} (T)\right\vert -\left\vert \operatorname {leaves} (\operatorname {prune} (T,t))\right\vert }}} is chosen for removal. The function ⁠ prune ⁡ ( T , t ) {\displaystyle \operatorname {prune} (T,t)} ⁠ defines the tree obtained by pruning the subtrees ⁠ t {\displaystyle t} ⁠ from the tree ⁠ T {\displaystyle T} ⁠. Once the series of trees has been created, the best tree is chosen by generalized accuracy as measured by a training set or cross-validation. == Examples == Pruning could be applied in a compression scheme of a learning algorithm to remove the redundant details without compromising the model's performances. In neural networks, pruning removes entire neurons or layers of neurons.

  Read more →
• 

  Instant messaging

  Instant messaging (IM) technology is a type of synchronous computer-mediated communication involving the immediate (real-time) transmission of messages between two or more parties over the Internet or another computer network. Originally involving simple text message exchanges, modern instant messaging applications and services (also variously known as instant messenger, messaging app, chat app, chat client, or simply a messenger) tend to also feature the exchange of multimedia, emojis, file transfer, VoIP (voice calling), and video chat capabilities. Instant messaging systems facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list") or in chat rooms, and can be standalone apps or integrated into a wider social media platform, or in a website where it can, for instance, be used for conversational commerce. Originally the term "instant messaging" was distinguished from "text messaging" by being run on a computer network instead of a cellular/mobile network, being able to write longer messages, real-time communication, presence ("status"), and being free (only cost of access instead of per SMS message sent). Instant messaging was pioneered in the early Internet era; the IRC protocol was the earliest to achieve wide adoption. Later in the 1990s, ICQ was among the first closed and commercialized instant messengers, and several rival services appeared afterwards as it became a popular use of the Internet. Beginning with its first introduction in 2005, BlackBerry Messenger became the first popular example of mobile-based IM, combining features of traditional IM and mobile SMS. Instant messaging remains very popular today; IM apps are the most widely used smartphone apps: in 2018 for instance there were 980 million monthly active users of WeChat and 1.3 billion monthly users of WhatsApp, the largest IM network. == Overview == Instant messaging (IM), sometimes also called "messaging" or "texting", consists of computer-based human communication between two users (private messaging) or more (chat room or "group") in real-time, allowing immediate receipt of acknowledgment or reply. This is in direct contrast to email, where conversations are not in real-time, and the perceived quasi-synchrony of the communications by the users (although many systems allow users to send offline messages that the other user receives when logging in). Earlier IM networks were limited to text-based communication, not dissimilar to mobile text messaging. As technology has moved forward, IM has expanded to include voice calling using a microphone, videotelephony using webcams, file transfer, location sharing, image and video transfer, voice notes, and other features. IM is conducted over the Internet or other types of networks (see also LAN messenger). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client–server (when all clients have to first connect to the central server). Primary IM services are controlled by their corresponding companies and usually follow the client-server model. At one point, the term "Instant Messenger" was a service mark of AOL Time Warner and could not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". === Clients === Modern IM services generally provide their own client, either a separately installed application or a browser-based client. They are normally centralised networks run by the servers of the platform's operators, unlike peer-to-peer protocols like XMPP. These usually only work within the same IM network, although some allow limited function with other services (see #Interoperability). Third-party client software applications exist that will connect with most of the major IM services. There is the class of instant messengers that uses the serverless model, which doesn't require servers, and the IM network consists only of clients. There are several serverless messengers: RetroShare, Tox, Bitmessage, Ricochet. See also: LAN messenger. Some examples of popular IM services today include Signal, Telegram, WhatsApp Messenger, WeChat, QQ Messenger, Viber, Line, and Snapchat. The popularity of certain apps greatly differ between different countries. Certain apps have an emphasis on certain uses - for example, Skype focuses on video calling, Slack focuses on messaging and file sharing for work teams, and Snapchat focuses on image messages. Some social networking services offer messaging services as a component of their overall platform, such as Facebook's Facebook Messenger, who also own WhatsApp. Others have a direct IM function as an additional adjunct component of their social networking platforms, like Instagram, Reddit, Tumblr, TikTok, Clubhouse and Twitter; this also includes for example dating websites, such as OkCupid or Plenty of Fish, and online gaming chat platforms. === Features === ==== Private and group messaging ==== Private chat allows users to converse privately with another person or a group. Privacy can also be enhanced in several ways, such as end-to-end encryption by default. Public and group chat features allow users to communicate with multiple people simultaneously. ==== Calling ==== Many major IM services and applications offer a call feature for user-to-user voice calls, conference calls, and voice messages. The call functionality is useful for professionals who utilize the application for work purposes and as a hands-free method. Videotelephony using a webcam is also possible by some. ==== Games and entertainment ==== Some IM applications include in-app games for entertainment. Yahoo! Messenger, for example, introduced these where users could play a game and viewed by friends in real-time. MSN Messenger featured a number of playable games within the interface. Facebook's Messenger has had a built-in option to play games with people in a chat, including games like Tetris and Blackjack. Discord features multiple games built inside the "activities" tab in voice channels. ==== Payments ==== A relatively new feature to instant messaging, peer-to-peer payments are available for financial tasks on top of communication. The lack of a service fee also makes these advantageous to financial applications. IM services such as Facebook Messenger and the WeChat 'super-app' for example offer a payment feature. == History == === Early systems === Though the term dates from the 1990s, instant messaging predates the Internet, first appearing on multi-user operating systems like Compatible Time-Sharing System (CTSS) and Multiplexed Information and Computing Service (Multics) in the mid-1960s. Initially, some of these systems were used as notification systems for services like printing, but quickly were used to facilitate communication with other users logged into the same machine. CTSS facilitated communication via text message for up to 30 people. Parallel to instant messaging were early online chat facilities, the earliest of which was Talkomatic (1973) on the PLATO system, which allowed 5 people to chat simultaneously on a 512 x 512 plasma display (5 lines of text + 1 status line per person). During the bulletin board system (BBS) phenomenon that peaked during the 1980s, some systems incorporated chat features which were similar to instant messaging; Freelancin' Roundtable was one prime example. The first such general-availability commercial online chat service (as opposed to PLATO, which was educational) was the CompuServe CB Simulator in 1980, created by CompuServe executive Alexander "Sandy" Trevor in Columbus, Ohio. As networks developed, the protocols spread with the networks. Some of these used a peer-to-peer protocol (e.g. talk, ntalk and ytalk), while others required peers to connect to a server (see talker and IRC). The Zephyr Notification Service (still in use at some institutions) was invented at MIT's Project Athena in the 1980s to allow service providers to locate and send messages to users. Early instant messaging programs were primarily real-time text, where characters appeared as they were typed. This includes the Unix "talk" command line program, which was popular in the 1980s and early 1990s. Some BBS chat programs (i.e. Celerity BBS) also used a similar interface. Modern implementations of real-time text also exist in instant messengers, such as AOL's Real-Time IM as an optional feature. In the latter half of the 1980s and into the early 1990s, the Quantum Link online service for Commodore 64 computers offered user-to-user messages between concurrently connected customers, which they called "On-Line Messages" (or OLM for short), and later "FlashMail." Quantum Link later became America Online and made AOL Instant Messenger (AIM, discussed later). While the Quantum Link client software ran on a Commodore 64, using only

  Read more →
• 

  Codebook

  A codebook is a type of document used for gathering and storing cryptography codes. Originally, codebooks were often literally books, but today "codebook" is a byword for the complete record of a series of codes, regardless of physical format. == Cryptography == In cryptography, a codebook is a document used for implementing a code. A codebook contains a lookup table for coding and decoding; each word or phrase has one or more strings which replace it. To decipher messages written in code, corresponding copies of the codebook must be available at either end. The distribution and physical security of codebooks presents a special difficulty in the use of codes compared to the secret information used in ciphers, the key, which is typically much shorter. The United States National Security Agency documents sometimes use codebook to refer to block ciphers; compare their use of combiner-type algorithm to refer to stream ciphers. Codebooks come in two forms, one-part or two-part: In one-part codes, the plaintext words and phrases and the corresponding code words are in the same alphabetical order. They are organized similar to a standard dictionary. Such codes are half the size of two-part codes but are more vulnerable since an attacker who recovers some code word meanings can often infer the meaning of nearby code words. One-part codes may be used simply to shorten messages for transmission or have their security enhanced with superencryption methods, such as adding a secret number to numeric code words. In two-part codes, one part is for converting plaintext to ciphertext, the other for the opposite purpose. They are usually organized similarly to a language translation dictionary, with plaintext words (in the first part) and ciphertext words (in the second part) presented like dictionary headwords. The earliest known use of a codebook system was by Gabriele de Lavinde in 1379 working for the Antipope Clement VII. Two-part codebooks go back as least as far as Antoine Rossignol in the 1800s. From the 15th century until the middle of the 19th century, nomenclators (named after nomenclator) were the most used cryptographic method. Codebooks with superencryption were the most used cryptographic method of World War I. The JN-25 code used in World War II used a codebook of 30,000 code groups superencrypted with 30,000 random additives. The book used in a book cipher or the book used in a running key cipher can be any book shared by sender and receiver and is different from a cryptographic codebook. == Social sciences == In social sciences, a codebook is a document containing a list of the codes used in a set of data to refer to variables and their values, for example locations, occupations, or clinical diagnoses. == Data compression == Codebooks were also used in 19th- and 20th-century commercial codes for the non-cryptographic purpose of data compression. Codebooks are used in relation to precoding and beamforming in mobile networks such as 5G and LTE. The usage is standardized by 3GPP, for example in the document TS 38.331, NR; Radio Resource Control (RRC); Protocol specification.

  Read more →
• 

  G.9972

  G.9972 (also known as G.cx) is a Recommendation developed by ITU-T that specifies a coexistence mechanism for networking transceivers capable of operating over electrical power line wiring. It allows G.hn devices to coexist with other devices implementing G.9972 and operating on the same power line wiring. G.9972 received consent during the meeting of ITU-T Study Group 15, on October 9, 2009, and final approval on June 11, 2010. G.9972 specifies two mechanisms for coexistence between G.hn home networks and broadband over power lines (BPL) Internet access networks: Frequency-division multiplexing (FDM), in which the available spectrum is divided into two parts: frequencies below 10 or 14 MHz (specific value can be selected by the access network) are reserved for the access network, while frequencies above them are reserved for the in-home network. Time-division multiplexing (TDM), in which the available channel time is split equally between both networks. 50% of time slots are allocated for the access network, and 50% are allocated to the in-home network.

  Read more →
• 

  Tesla Dojo

  Tesla Dojo is a series of supercomputers designed and built by Tesla for computer vision video processing and recognition. It was used for training Tesla's machine learning models to improve its Full Self-Driving (FSD) advanced driver-assistance system. It went into production in July 2023. Dojo's goal was to efficiently process millions of terabytes of video data captured from real-life driving situations from Tesla's 4+ million cars. This goal led to a considerably different architecture than conventional supercomputer designs. In August 2025, Bloomberg News reported that the Dojo project had been disbanded, though it was restarted in January 2026. == History == Tesla operates several massively parallel computing clusters for developing its Autopilot advanced driver assistance system. Its primary unnamed cluster using 5,760 Nvidia A100 graphics processing units (GPUs) was touted by Andrej Karpathy in 2021 at the fourth International Joint Conference on Computer Vision and Pattern Recognition (CCVPR 2021) to be "roughly the number five supercomputer in the world" at approximately 81.6 petaflops, based on scaling the performance of the Nvidia Selene supercomputer, which uses similar components. However, the performance of the primary Tesla GPU cluster has been disputed, as it was not clear if this was measured using single-precision or double-precision floating point numbers (FP32 or FP64). Tesla also operates a second 4,032 GPU cluster for training and a third 1,752 GPU cluster for automatic labeling of objects. The primary unnamed Tesla GPU cluster has been used for processing one million video clips, each ten seconds long, taken from Tesla Autopilot cameras operating in Tesla cars in the real world, running at 36 frames per second. Collectively, these video clips contained six billion object labels, with depth and velocity data; the total size of the data set was 1.5 petabytes. This data set was used for training a neural network intended to help Autopilot computers in Tesla cars understand roads. By August 2022, Tesla had upgraded the primary GPU cluster to 7,360 GPUs. Dojo was first mentioned by Elon Musk in April 2019 during Tesla's "Autonomy Investor Day". In August 2020, Musk stated it was "about a year away" due to power and thermal issues. Dojo was officially announced at Tesla's Artificial Intelligence (AI) Day on August 19, 2021. Tesla revealed details of the D1 chip and its plans for "Project Dojo", a datacenter that would house 3,000 D1 chips; the first "Training Tile" had been completed and delivered the week before. In October 2021, Tesla released a "Dojo Technology" whitepaper describing the Configurable Float8 (CFloat8) and Configurable Float16 (CFloat16) floating point formats and arithmetic operations as an extension of Institute of Electrical and Electronics Engineers (IEEE) standard 754. At the follow-up AI Day in September 2022, Tesla announced it had built several System Trays and one Cabinet. During a test, the company stated that Project Dojo drew 2.3 megawatts (MW) of power before tripping a local San Jose, California power substation. At the time, Tesla was assembling one Training Tile per day. In August 2023, Tesla powered on Dojo for production use as well as a new training cluster configured with 10,000 Nvidia H100 GPUs. In January 2024, Musk described Dojo as "a long shot worth taking because the payoff is potentially very high. But it's not something that is a high probability." In June 2024, Musk explained that ongoing construction work at Gigafactory Texas is for a computing cluster claiming that it is planned to comprise an even mix of "Tesla AI" and Nvidia/other hardware with a total thermal design power of at first 130 MW and eventually exceeding 500 MW. In August 2025, Bloomberg News reported that the Dojo project was disbanded, though Musk announced it would be restarted in January 2026 with a new chip iteration. == Technical architecture == The fundamental unit of the Dojo supercomputer is the D1 chip, designed by a team at Tesla led by ex-AMD CPU designer Ganesh Venkataramanan, including Emil Talpes, Debjit Das Sarma, Douglas Williams, Bill Chang, and Rajiv Kurian. The D1 chip is manufactured by the Taiwan Semiconductor Manufacturing Company (TSMC) using 7 nanometer (nm) semiconductor nodes, has 50 billion transistors and a large die size of 645 mm2 (1.0 square inch). Updating at Artificial Intelligence (AI) Day in 2022, Tesla announced that Dojo would scale by deploying multiple ExaPODs, in which there would be: 10 Cabinets per ExaPOD (1,062,000 cores, 3,000 D1 chips) 2 System Trays per Cabinet (106,200 cores, 300 D1 chips) 6 Training Tiles per System Tray (53,100 cores, along with host interface hardware) 25 D1 chips per Training Tile (8,850 cores) 354 computing cores per D1 chip According to Venkataramanan, Tesla's senior director of Autopilot hardware, Dojo will have more than an exaflop (a million teraflops) of computing power. For comparison, according to Nvidia, in August 2021, the (pre-Dojo) Tesla AI-training center used 720 nodes, each with eight Nvidia A100 Tensor Core GPUs for 5,760 GPUs in total, providing up to 1.8 exaflops of performance. === D1 chip === Each node (computing core) of the D1 processing chip is a general purpose 64-bit CPU with a superscalar core. It supports internal instruction-level parallelism, and includes simultaneous multithreading (SMT). It doesn't support virtual memory and uses limited memory protection mechanisms. Dojo software/applications manage chip resources. The D1 instruction set supports both 64-bit scalar and 64-byte single instruction, multiple data (SIMD) vector instructions. The integer unit mixes reduced instruction set computer (RISC-V) and custom instructions, supporting 8, 16, 32, or 64 bit integers. The custom vector math unit is optimized for machine learning kernels and supports multiple data formats, with a mix of precisions and numerical ranges, many of which are compiler composable. Up to 16 vector formats can be used simultaneously. ==== Node ==== Each D1 node uses a 32-byte fetch window holding up to eight instructions. These instructions are fed to an eight-wide decoder which supports two threads per cycle, followed by a four-wide, four-way SMT scalar scheduler that has two integer units, two address units, and one register file per thread. Vector instructions are passed further down the pipeline to a dedicated vector scheduler with two-way SMT, which feeds either a 64-byte SIMD unit or four 8×8×4 matrix multiplication units. The network on-chip (NOC) router links cores into a two-dimensional mesh network. It can send one packet in and one packet out in all four directions to/from each neighbor node, along with one 64-byte read and one 64-byte write to local SRAM per clock cycle. Hardware native operations transfer data, semaphores and barrier constraints across memories and CPUs. System-wide double data rate 4 (DDR4) synchronous dynamic random-access memory (SDRAM) memory works like bulk storage. ==== Memory ==== Each core has a 1.25 megabytes (MB) of SRAM main memory. Load and store speeds reach 400 gigabytes (GB) per second and 270 GB/sec, respectively. The chip has explicit core-to-core data transfer instructions. Each SRAM has a unique list parser that feeds a pair of decoders and a gather engine that feeds the vector register file, which together can directly transfer information across nodes. ==== Die ==== Twelve nodes (cores) are grouped into a local block. Nodes are arranged in an 18×20 array on a single die, of which 354 cores are available for applications. The die runs at 2 gigahertz (GHz) and totals 440 MB of SRAM (360 cores × 1.25 MB/core). It reaches 376 teraflops using 16-bit brain floating point (BF16) numbers or using configurable 8-bit floating point (CFloat8) numbers, which is a Tesla proposal, and 22 teraflops at FP32. Each die comprises 576 bi-directional serializer/deserializer (SerDes) channels along the perimeter to link to other dies, and moves 8 TB/sec across all four die edges. Each D1 chip has a thermal design power of approximately 400 watts. === Training Tile === The water-cooled Training Tile packages 25 D1 chips into a 5×5 array. Each tile supports 36 TB/sec of aggregate bandwidth via 40 input/output (I/O) chips - half the bandwidth of the chip mesh network. Each tile supports 10 TB/sec of on-tile bandwidth. Each tile has 11 GB of SRAM memory (25 D1 chips × 360 cores/D1 × 1.25 MB/core). Each tile achieves 9 petaflops at BF16/CFloat8 precision (25 D1 chips × 376 TFLOP/D1). Each tile consumes 15 kilowatts; 288 amperes at 52 volts. === System Tray === Six tiles are aggregated into a System Tray, which is integrated with a host interface. Each host interface includes 512 x86 cores, providing a Linux-based user environment. Previously, the Dojo System Tray was known as the Training Matrix, which includes six Training Tiles, 20 Dojo Interface Processor cards across four host servers, and Ethernet-l

  Read more →
• 

  Sysomos

  Sysomos Inc. is a Toronto-based social media analytics company owned by Outside Insight market leaders Meltwater. The company developed text analytics and machine learning technologies for user generated content, and served 80% of the top agencies and Fortune 500. == History == Sysomos was founded by Nilesh Bansal and Nick Koudas. The company is a spinoff of the University of Toronto research project BlogScope. The BlogScope project, which started in 2005, resulted in creation of the underlying content aggregation and analysis engine commercialized by Sysomos. The company raised venture capital in 2008 and was acquired by Marketwire in 2010. The company's original flagship product, Media Analysis Platform (MAP), mines and analyzes content from social media or user-generated content to create a picture of media coverage. Sysomos launched its flagship offering MAP in Sept 2007, followed by addition of Heartbeat to its product suite in 2009. In addition to the two main products, the company released FourWhere, a free location-based social search service that mashes up Foursquare in March 2010. The company also offers Sysomos Heartbeat which provides social media monitoring and engagement capabilities to communication professionals, brand managers and customer support groups. In 2013, Heartbeat was extended to add publishing components to deliver a complete end-to-end social media marketing platform. On July 6, 2010, it was announced that Marketwire, a press release distribution company, had acquired Sysomos. After the acquisition, Sysomos founders Nick Koudas and Nilesh Bansal, left Sysomos to start Aislelabs. In February 2015, Sysomos split from Marketwired, as an independent company, and appointed Adnan Ahmed as the new CEO. In March 2015, newly independent Sysomos launched a redesign for its Heartbeat product and a new API for its MAP product. In the same year, the company acquired Expion. In September 2016, Peter Heffring was announced as the new CEO. In April 2017, Sysomos showcased a new unified platform offering new insights. In April 2018, media monitoring firm Meltwater announced it had acquired Sysomos. The CEO of Sysomos, Peter Heffring, said the company will continue to operate as an independent unit of Meltwater. Heffring will run the social analytics division of Meltwater. == Reports == Inside Twitter series of reports is the most extensive third-party survey on Twitter's growth and demographics. Another extensive survey regarding the top 5% of most active Twitter users found that over 25% of all tweets are machine created. The report also confirms Twitter's international growth. Inside Facebook Pages report found that only four percent of pages have more than 10,000 fans, 0.76% of pages have more than 100,000 fans, and 0.05% of pages (or 297 in total) have more than a million fans. Inside YouTube reports focus more on video hosting services and YouTube.

  Read more →
• 

  Private message

  In computer networking, a private message (PM), or direct message (DM), refers to a private communication, often text-based, sent or received by a user of a private communication channel on any given platform. Unlike public posts, PMs are only viewable by the participants. Long a function present on IRCs and Internet forums, private channels for PMs have also been prevalent features on instant messaging (IM) and on social media networks. It may be either synchronous (e.g. on an IM) or asynchronous (e.g. on an Internet forum). The term private message (PM) originated as a feature on internet forums, while the term direct message (DM) originated as a feature on Twitter. Due to the popularity of the latter service, DM has since been appropriated by other platforms, such as Instagram, and is often genericized in popular usage. == Overview == There are two main types of private messages, and one obscure type: One type includes those found on IRCs and Internet forums, as well as on social media services like Twitter, Facebook, and Instagram, where the focus is public posting, PMs allow users to communicate privately without leaving the platform. The second type are those relayed through instant messaging platforms such as WhatsApp and Snapchat, where users join the networks primarily to exchange PMs. A third type, peer-to-peer messaging, occurs when users create and own the infrastructure used to transmit and store the messages; while features vary depending on application, they give the user full control over the data they transmit. An example of software that enables this kind of messaging is Classified-ads. Besides serving as a tool to connect privately with friends and family, PMs have gained momentum in the workplace. Working professionals use PMs to reach coworkers in other spaces and increase efficiency during meetings. Although useful, using PMs in the workplace may blur the boundary between work and private lives. Some common forms of private messaging today include Facebook messaging (sometimes referred to as "inboxing"), Twitter direct messaging, and Instagram direct messaging. These forms of private messaging provide a private space on a usually public site. For instance, most activity on Twitter is public, but Twitter DMs provide a private space for communication between two users. This differs from mediums like email, texting, and Snapchat, where most or all activity is always private. Modern forms of private messaging may include multimedia messages, such as pictures or videos. == History == Email was first developed to send messages between different computers on ARPANET in 1971. Access to ARPANET was primarily limited to universities and other research institutions. Starting in 1983 or 1984, FidoNet allowed home computer users to send and receive email via bulletin board systems. Information services such as CompuServe, America Online, and Prodigy also helped to popularizes online messaging. The advent of the public World Wide Web in 1993 increased access to email via internet service providers, and later via webmail. Instant messaging systems became popular in the mid 1990s, as Internet access improved and personal computers became more common. The introduction of Skype in 2003 popularized Internet-based voice and video messaging. Direct messaging is now a feature of all major social networking services. == Privacy concerns == In January 2014, Matthew Campbell and Michael Hurley filed a class-action lawsuit against Facebook for breaching the Electronic Communications Privacy Act. They alleged that private messages which contained URLs were being read and used to generate profit, through data mining and user profiling, and that it was misleading for Facebook to refer to the functionality as "private" with the implication that the communication was "free from surveillance". In 2012, some Facebook users misinterpreted a redesign of the Facebook wall as publicly sharing private messages from 2008–2009. These were found to be public wall posts from those years, made at a time when it was not possible to like or comment on a wall post, making the notes look like private messages.

  Read more →
• 

  Cover (telecommunications)

  In telecommunications and tradecraft, cover is the technique of concealing or altering the characteristics of communications patterns for the purpose of denying an unauthorized receiver information that would be of value. The purpose of cover is not to make the communication secure, but to make it look like noise, rendering it uninteresting and not worth analysis. Even if an attacker recognizes the communication as interesting, cover makes traffic analysis more difficult since he must crack the cover before he can find out to whom it is addressed. Usually, the covered communication is also encrypted. In this way, enemies have no idea you sent a message; friends know you sent a message, but don't know what you said; the intended recipient knows what you said. Technically, cover sometimes refers to the specific process of modulo two additions of a pseudorandom bit stream generated by a cryptographic device with bits from the control message. Source: from Federal Standard 1037C and from MIL-STD-188

  Read more →
• 

  Pixel aspect ratio

  A pixel aspect ratio (PAR) is a mathematical ratio that describes how the width of a pixel in a digital image compares to the height of that pixel. Most digital imaging systems display an image as a grid of tiny, square pixels. However, some imaging systems, especially those that must be compatible with standard-definition television motion pictures, display an image as a grid of rectangular pixels, in which the pixel width and height are different. Pixel aspect ratio describes this difference. Use of pixel aspect ratio mostly involves pictures pertaining to standard-definition television and some other exceptional cases. Most other imaging systems, including those that comply with SMPTE standards and practices, use square pixels. PAR is also known as sample aspect ratio and abbreviated SAR, though it can be confused with storage aspect ratio. == Introduction == The ratio of the width to the height of an image is known as the aspect ratio, or more precisely the display aspect ratio (DAR) – the aspect ratio of the image as displayed; for TV, DAR was traditionally 4:3 (a.k.a. fullscreen), with 16:9 (a.k.a. widescreen) now the standard for HDTV. In digital images, there is a distinction with the storage aspect ratio (SAR), which is the ratio of pixel dimensions. If an image is displayed with square pixels, then these ratios agree; if not, then non-square, "rectangular" pixels are used, and these ratios disagree. The aspect ratio of the pixels themselves is known as the pixel aspect ratio (PAR) – for square pixels this is 1:1 – and these are related by the identity: Rearranging (solving for PAR) yields: For example: A 640 × 480 VGA image has a SAR of 640/480 = 4:3, and if displayed on a 4:3 display (DAR = 4:3) has square pixels, hence a PAR of 1:1. By contrast, a 720 × 576 D-1 PAL image has a SAR of 720/576 = 5:4, but if displayed on a 4:3 display (DAR = 4:3) the PAR is 4/3 : 5/4 = 16:15 ≈ 1.066. This means that the pixels of the PAL picture must be "stretched" by this amount to fit in the 4:3 display. In analog images such as film there is no notion of pixel, nor notion of SAR or PAR, but in the digitization of analog images the resulting digital image has pixels, hence SAR (and accordingly PAR, if displayed at the same aspect ratio as the original). Non-square pixels arise often in early digital TV standards, related to digitalization of analog TV signals – whose vertical and "effective" horizontal resolutions differ and are thus best described by non-square pixels – and also in some digital video cameras and computer display modes, such as Color Graphics Adapter (CGA). Today they arise also in transcoding between resolutions with different SARs. Actual displays do not generally have non-square pixels, though digital sensors might; they are rather a mathematical abstraction used in resampling images to convert between resolutions. There are several complicating factors in understanding PAR, particularly as it pertains to digitization of analog video: First, analog video does not have pixels, but rather a raster scan, and thus has a well-defined vertical resolution (the lines of the raster), but not a well-defined horizontal resolution, since each line is an analog signal. However, by a standardized sampling rate, the effective horizontal resolution can be determined by the sampling theorem, as is done below. Second, due to overscan, some of the lines at the top and bottom of the raster are not visible, as are some of the possible image on the left and right – see Overscan: Analog to digital resolution issues. Also, the resolution may be rounded (DV NTSC uses 480 lines, rather than the 486 that are possible). Third, analog video signals are interlaced – each image (frame) is sent as two "fields", each with half the lines. Thus either the pixels are twice as tall as they would be without interlacing, or the image is deinterlaced. == Background == Video is presented as a sequential series of images called video frames. Historically, video frames were created and recorded in analog form. As digital display technology, digital broadcast technology, and digital video compression evolved separately, it resulted in video frame differences that must be addressed using pixel aspect ratio. Digital video frames are generally defined as a grid of pixels used to present each sequential image. The horizontal component is defined by pixels (or samples), and is known as a video line. The vertical component is defined by the number of lines, as in 480 lines. Standard-definition television standards and practices were developed as broadcast technologies and intended for terrestrial broadcasting, and were therefore not designed for digital video presentation. Such standards define an image as an array of well-defined horizontal "Lines", well-defined vertical "Line Duration" and a well-defined picture center. However, there is not a standard-definition television standard that properly defines image edges or explicitly demands a certain number of picture elements per line. Furthermore, analog video systems such as NTSC 480i and PAL 576i, instead of employing progressively displayed frames, employ fields or interlaced half-frames displayed in an interwoven manner to reduce flicker and double the image rate for smoother motion. === Analog-to-digital conversion === As a result of computers becoming powerful enough to serve as video editing tools, video digital-to-analog converters and analog-to-digital converters were made to overcome this incompatibility. To convert analog video lines into a series of square pixels, the industry adopted a default sampling rate at which luma values were extracted into pixels. The luma sampling rate for 480i pictures was 12+3⁄11 MHz and for 576i pictures was 14+3⁄4 MHz. The term pixel aspect ratio was first coined when ITU-R BT.601 (commonly known as Rec. 601) specified that standard-definition television pictures are made of lines of exactly 720 non-square pixels. ITU-R BT.601 did not define the exact pixel aspect ratio but did provide enough information to calculate the exact pixel aspect ratio based on industry practices: The standard luma sampling rate of precisely 13+1⁄2 MHz. Based on this information: The pixel aspect ratio for 480i would be 10:11 as: 12 3 11 ÷ 13 1 2 = 10 11 {\displaystyle 12{\tfrac {3}{11}}\div 13{\tfrac {1}{2}}={\tfrac {10}{11}}} The pixel aspect ratio for 576i would be 59:54 as: 14 3 4 ÷ 13 1 2 = 59 54 {\displaystyle 14{\tfrac {3}{4}}\div 13{\tfrac {1}{2}}={\tfrac {59}{54}}} SMPTE RP 187 further attempted to standardize the pixel aspect ratio values for 480i and 576i. It designated 177:160 for 480i or 1035:1132 for 576i. However, due to significant difference with practices in effect by industry and the computational load that they imposed upon the involved hardware, SMPTE RP 187 was simply ignored. SMPTE RP 187 information annex A.4 further suggested the use of 10:11 for 480i. As of this writing, ITU-R BT.601-6, which is the latest edition of ITU-R BT.601, still implies that the pixel aspect ratios mentioned above are correct. === Digital video processing === As stated above, ITU-R BT.601 specified that standard-definition television pictures are made of lines of 720 non-square pixels, sampled with a precisely specified sampling rate. A simple mathematical calculation reveals that a 704 pixel width would be enough to contain a 480i or 576i standard 4:3 picture: A 4:3 480-line picture, digitized with the Rec. 601-recommended sampling rate, would be 704 non-square pixels wide. x 480 × 10 11 = 4 3 ⇒ x = 480 × 11 × 4 10 × 3 = 704 {\displaystyle {\frac {x}{480}}\times {\frac {10}{11}}={\frac {4}{3}}\Rightarrow x={\frac {480\times 11\times 4}{10\times 3}}=704} A 4:3 576-line picture, digitized with the Rec. 601-recommended sampling rate, would be 702+54⁄59 non-square pixels wide. x 576 × 59 54 = 4 3 ⇒ x = 576 × 54 × 4 59 × 3 = 702 54 59 {\displaystyle {\frac {x}{576}}\times {\frac {59}{54}}={\frac {4}{3}}\Rightarrow x={\frac {576\times 54\times 4}{59\times 3}}=702{\tfrac {54}{59}}} Unfortunately, not all standard TV pictures are exactly 4:3: As mentioned earlier, in analog video, the center of a picture is well-defined but the edges of the picture are not standardized. As a result, some analog devices (mostly PAL devices but also some NTSC devices) generated motion pictures that were horizontally (slightly) wider. This also proportionately applies to anamorphic widescreen (16:9) pictures. Therefore, to maintain a safe margin of error, ITU-R BT.601 required sampling 16 more non-square pixels per line (8 more at each edge) to ensure saving all video data near the margins. This requirement, however, had implications for PAL motion pictures. PAL pixel aspect ratios for standard (4:3) and anamorphic wide screen (16:9), respectively 59:54 and 118:81, were awkward for digital image processing, especially for mixing PAL and NTSC video clips. Therefore, video editing products chose the almost equivalent value

  Read more →
• 

  Utah Social Media Regulation Act

  S.B. 152 and H.B. 311, collectively known as the Utah Social Media Regulation Act, were social media regulation bills that were passed by the Utah State Legislature in March 2023. The bills would have collectively imposed restrictions on how social networking services serve minors in the state of Utah, including mandatory age verification and age restrictions, as well as restrictions on data collection and on algorithmic recommendations. The Act was intended to take effect in March 2024. However, following a lawsuit over the Act by NetChoice, a tech industry lobby group, the Utah attorney general stated in January 2024 that its implementation had been delayed to October 2024, but was likely to be repealed and amended. On September 10, 2024 Chief Judge Robert J. Shelby issued a written order granting a request from NetChoice for a preliminary injunction, meaning that Utah will be unable to enforce its social media law as litigation plays out. The law was appealed to the 10th Circuit on October 11, 2024 and is awaiting a decision. == Provisions == The Act comprises two bills, S.B. 152 and H.B. 311, which respectively regulate access to social network accounts registered to minors, and impose obligations on social networking services to follow design practices that protect the privacy of minors. The bills would apply to social networks with more than 5 million active users in the United States. Social networking services would've verified the age of all users in the state of Utah, or else their account must've been deleted. The Act does not specify a specific method of age verification. Users who are under 18 must have consent from a parent or guardian to open an account, and the parent must be able to have access to the account and its data for monitoring. Unless required to comply with state or federal law, social networks were prohibited from collecting data based on the activity of minors, and may've not displayed targeted advertising or algorithmic recommendations of content, users, or groups to minors. A social network must not allow minors to access the service between the hours of 10:30 p.m., and 6:30 a.m. without parental consent. H.B. 311 prohibits social networks from exposing features to minors that cause them to have an "addiction" to the platform; the service must perform quarterly audits, and may be sued by users for harms caused by providing "addictive" features; there is a rebuttable presumption of harm if the plaintiff is 16 or younger. The bills prescribed fines of $2,500 per-violation for violations of the provisions of S.B. 152, and up to $250,000 in liabilities (plus fines of $2,500 per-user) for violations of the addiction rules. == History == The two bills were passed in early-March 2023, and signed by Governor Spencer Cox on March 23, 2023. Cox cited studies linking social media addiction to increases in depression and suicide among youth. They were originally intended to take effect on March 1, 2024. In the wake of a lawsuit in Arkansas by the trade association NetChoice over a similar bill, state senator and bill author Mike McKell stated that he planned to introduce amendments when the legislature resumed in 2024. In December 2023, NetChoice filed a lawsuit in Utah seeking to block the Act, citing that its definition of a social network was too vague, and that it "restricts who can express themselves, what can be said, and when and how speech on covered websites can occur, down to the very hours of the day minors can use covered websites. The First Amendment, reinforced by decades of precedent, allows none of this." In regards to its age verification requirements, NetChoice argued that "it may not be enough to simply verify the age of whatever person may be listed on a form of identification (even if they have such a record) because that record may not accurately reflect who the individual actually is." The office of the attorney general stated that the state was "reviewing the lawsuit but remains intently focused on the goal of this legislation: Protecting young people from negative and harmful effects of social media use." In January 2024, Attorney General Sean Reyes asked the court to delay a hearing over the bill, stating that its effective date had been delayed to October 2024, and that the legislature planned to repeal and replace the bills. On September 10, 2024, Federal Chief Judge Robert Shelby granted a preliminary injunction to stop enforcement of the law as litigation continues. The law was later appealed on October 11, 2024, by the state of Utah and had a court hearing on the appeal on November 20, 2025.

  Read more →
• 

  Data product

  In data management and product management, a data product is a reusable, active, and standardized data asset designed to deliver measurable value to its users, whether internal or external, by applying the rigorous principles of product thinking and management. It comprises one or more data artifacts (e.g., datasets, models, pipelines) and is enriched with metadata, including governance policies, data quality rules, data contracts, and, where applicable, a software bill of materials (SBOM) to document its dependencies and components. Ownership of a data product is aligned to a specific domain or use case, ensuring accountability, stewardship, and its continuous evolution throughout its lifecycle. Adhering to the FAIR principles – findable, accessible, interoperable, and reusable – a data product is designed to be discoverable, scalable, reusable, and aligned with both business and regulatory standards, driving innovation and efficiency in modern data ecosystems. == History == In 2012, DJ Patil proposed the first documented definition: a data product is a product that facilitates an end goal through the use of data. In 2019, Zhamak Dehghani introduced Data Mesh, with a strong focus on domain-oriented data products. Later, in 2020, she solidifies Data Mesh around four principles, one being Data as a Product, in which she defines Data Product as the node on the mesh that encapsulates three structural components required for its function, providing access to the domain's analytical data as a product. In 2024, Andrea Gioia published one of the first books specifically on data products post Data Mesh announcement. In his book, Gioia defines the concept of pure data product. In 2025, during the Data Day Texas conference, Jean-Georges Perrin and a collective of product managers and data engineers got together to craft the current definition and make it available to the public domain. In July 2025, Bitol, a project of The Linux Foundation, released and early version of the Open Data Product Standard (ODPS) aiming at normalizing data products

  Read more →