AI Assistant Job Description

AI Assistant Job Description — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Real-time transcription

Real-time transcription is the general term for transcription by court reporters using real-time text technologies to deliver computer text screens within a few seconds of the words being spoken. Specialist software allows participants in court hearings or depositions to make notes in the text and highlight portions for future reference. Real-time transcription is also used in the broadcasting environment where it is more commonly termed "captioning." == Career opportunities == Real-time reporting is used in a variety of industries, including entertainment, television, the Internet, and law. Specific careers include the following: Judicial reporters use a stenotype to provide instant transcripts on computer screens as a trial or deposition occurs. Communication access real-time translation (CART) reporters assist the hearing-impaired by transcribing spoken words, giving them personal access to the communications they need day to day. Television broadcast captioners use real-time reporting technology to allow hard-of-hearing or deaf people to see what is being said on live television broadcasts such as news, emergency broadcasts, sporting events, awards shows, and other programs. Internet information (or Webcast) reporters provide real-time reporting of sales meetings, press conferences, and other events, while simultaneously transmitting the transcripts to computers worldwide. Other rapid data entry positions. == History == Before the advent of the stenotype machine, court reporters wrote official trial transcripts by hand using a shorthand system of stenoforms that could later be translated into readable English. It often took eight years of training to learn this manual form of writing at the necessary speed. Walter Heironimus was among the first stenographers to make use of the stenotype machine during his work in the U.S. District Court system in New Jersey in 1935. A "transcript crisis" arose during the later half of the twentieth century due to the increasing volume of lawsuits. There were not enough number of court reporters to match the increasing number of trials. Not only were court reporters unavailable to attend many court proceedings, court transcripts were constantly late and the qualities varied. Some believed it was due to the non-interchangeability between court reporters, and others believed it was simply due to a labor shortage. In the meantime, magnetic audiotape recording, or known as electronic recording (ER) began to threaten all reporters' job since it could record long-hour courtroom trials and replace a court reporter's position in the courtroom. As a result, machine translation (MT) intended to serve as a solution for preventing ER from potentially replacing reporters' jobs. However, MT relied heavily on human labors operating behind the system and many started to question if it should be the right way to end the "transcript crisis." Later in 1964, set up by CIA, the Automatic Language Processing Advisory Committee (ALPAC) was set to review whether MT was capable of solving this crisis. They concluded that MT had failed to do so. Then Patrick O'Neill, a skilled and experienced court reporter, stayed to work on the stenotype-translation project with CIA and developed the prototype CAT system. After adopting the CAT system in court-reporting community, CAT was brought into the television broadcasting system, aiming to provide captions for the deaf or hard-of-hearing communities. In 1983, Linda Miller developed a further use for the CAT system. She successfully translated a lecture live on the television screen and provided a transcript for students. This technique is known as Computer-Aided Real-time Translation, or CART. == Court reporter == It is the court reporter's job to note down the exact words spoken by every participants during a court or deposition proceeding. Then court reporters will provide verbatim transcripts. The reason to have an official court transcript is that the real-time transcriptions allows attorneys and judges to have immediate access to the transcript. It also helps when there's a need to look up for information from the proceeding. Additionally, the deaf and the hard-of-hearing communities can also participate in the judicial process with the help of real-time transcriptions provided by court reporters. === Education and training === The required degree level for a court reporter to have is an Associate's degree or postsecondary certificate. In order to become a court reporter, more than 150 reporter training programs are provided at proprietary schools, community colleges, and four-year universities. After graduation, court reporters can choose to further pursue certifications to achieve a higher level of expertise and increase their marketability during a job search. In most states, Certificates of Proficiency from the NCRA or from state agencies are now required certificates for court reporters to have in order to qualify for appointments. The NCRA aims to set the national standard for the certification of court reporters, and since 1937 it has offered its certification program which is now accepted by 22 states instead of state licenses. Court reporter training programs include but not limited to: Training in rapid writing skill, or shorthand, which will enable students to record, with accuracy, at least 225 words per minute Training in typing, which will enable students to type at least 60 words per minute A general training in English, which covers aspects of grammar, word formation, punctuation, spelling and capitalization Taking Law related courses in order to understand the overall principles of civil and criminal law, legal terminology and common Latin phrases, rules of evidence, court procedures, the duties of court reporters, the ethics of the profession Visits to actual trials Taking courses in elementary anatomy and physiology and medical word study including medical prefixes, roots and suffixes. Other than official court reporters, who are assigned to and work for a particular court, other types of court reporters include free-lance reporter, who either works for a court reporting firm or self-employed. They are different from official court reporters in that they have the chances to work on a wider range of assignments and work on basis of hourly wage. Hearing reporters work at governmental agency hearings. Legislative reporters work in law-making bodies. The demand for reporters is not limited in just the court settings. Reporters are also needed in conferences, meetings, conventions, investigations, and a variety of industries with needs for employers with real-time data entry skills. == Non-English transcription == Transcription services are universally necessary, so it is not limited to the English language. A stenographer's ability to transcribe languages beyond only English is especially valuable as society as a whole becomes increasingly multilingual. Education in non-English transcription demands a comprehensive understanding of the given language. Phonetic differences between English and other languages are a particular challenge in carrying English transcription skills over into other languages. Stenography represents various sounds of a language in a formal system of shorthand, so differences within the sets of sounds that emerge in other languages require an alternative system of shorthand transcription. For example, the presence of many diphthongs and triphthongs in Spanish requires certain sounds to be distinguished that would not be present in transcribing English into shorthand. == Controversies == The usage of transcription in the context of linguistic discussions has been controversial. Typically, two kinds of linguistic records are considered to be scientifically relevant. First, linguistic records of general acoustic features, and secondly, records that only focuses on the distinctive phonemes of a language. While transcriptions are not entirely illegitimate, transcriptions without enough detailed commentary regarding any linguistic features, or transcriptions of poor quality resources, has a great chance of the content being misinterpreted. Besides misinterpretation, transcribers could also bring in cultural biases and ignorance that reflect onto their transcription. These instances may cause a disruption of reliability in the final real-time transcription, which could influence how the written utterance is seen as an evidence for a court-case. === Quality issues === Problems in the final resulting transcription can be caused by either the quality of the transcriber or the original source that is being transcribed. Transcribers can come from different levels of skill and training background. This makes the final transcription prone to poor quality, or if the transcription is being done by multiple people, lack of consistency in the content. If the source of the transcription is a recording, the problem may root back to the quality of the re
Read more →
Digital cinematography

Digital cinematography is the process of capturing (recording) a motion picture using digital image sensors rather than through film stock. As digital technology has improved in recent years, this practice has become dominant. Since the 2000s, most movies across the world have been captured as well as distributed digitally. Many vendors have brought products to market, including traditional film camera vendors like Arri and Panavision, as well as new vendors like Red, Blackmagic, Silicon Imaging, Vision Research and companies which have traditionally focused on consumer and broadcast video equipment, like Sony, GoPro, and Panasonic. As of 2023, professional 4K digital cameras were approximately equal to 35mm film in their resolution and dynamic range capacity. Some filmmakers still prefer to use film picture formats to achieve the desired results. == History == The basis for digital cameras are metal–oxide–semiconductor (MOS) image sensors. The first practical semiconductor image sensor was the charge-coupled device (CCD), based on MOS capacitor technology. Following the commercialization of CCD sensors during the late 1970s to early 1980s, the entertainment industry slowly began transitioning to digital imaging and digital video over the next two decades. The CCD was followed by the CMOS active-pixel sensor (CMOS sensor), developed in the 1990s. Beginning in the late 1980s, Sony began marketing the concept of "electronic cinematography," utilizing its analog Sony HDVS professional video cameras. The effort met with very little success. However, this led to one of the earliest high definition video shot feature movies, Julia and Julia (1987). Rainbow (1996) was the world's first film to utilize extensive digital post production techniques. Shot entirely with Sony's first Solid State Electronic Cinematography cameras and featuring over 35 minutes of digital image processing and visual effects, all post production, sound effects, editing and scoring were completed digitally. The Digital High Definition image was transferred to a 35mm negative via an electron beam recorder for theatrical release. The first digitally videoed and post produced feature was Windhorse, shot in Tibet and Nepal in 1996 on the Sony DVW-700WS Digital Betacam and the prosumer Sony DCR-VX1000. The offline editing (Avid) and the online post and color work (Roland House / da Vinci) were also all digital. The film, transferred to 35mm negative for theatrical release, won Best U.S. Feature at the Santa Barbara Film Festival in 1998. In 1997, with the introduction of HDCAM recorders and 1920 × 1080 pixel digital professional video cameras based on CCD technology, the idea, now re-branded as "digital cinematography," began to gain traction in the market. Shot and released in 1998, The Last Broadcast is believed by some to be the first feature-length video shot and edited entirely on consumer-level digital equipment. In May 1999, George Lucas challenged the supremacy of the movie-making medium of film for the first time by including footage filmed with high-definition digital cameras in Star Wars: Episode I – The Phantom Menace. The digital footage blended seamlessly with the footage shot on film and he announced later that year he would film its sequels entirely on hi-def digital video. Also in 1999, digital projectors were installed in four theaters for the showing of The Phantom Menace. In May 2000, Vidocq, which was directed by Pitof, began principal photography shot entirely using a Sony HDW-F900 camera, with the video being released in September the next year. According to the Guinness World Records, Vidocq is the first full length feature filmed in digital high resolution. In June 2000, Star Wars: Episode II – Attack of the Clones began principal photography shot entirely using a Sony HDW-F900 camera as Lucas had previously stated. The film was released in May 2002. In May 2001 Once Upon a Time in Mexico was also shot in 24 frame-per-second high-definition digital video, partially developed by George Lucas using a Sony HDW-F900 camera, following Robert Rodriguez's introduction to the camera at Lucas' Skywalker Ranch facility whilst editing the sound for Spy Kids. A lesser-known movie, Russian Ark (2002), was also shot with the same camera and was the first tapeless digital movie, recorded on HDD instead of tape. In 2009, Slumdog Millionaire became the first movie shot mainly in digital to be awarded the Academy Award for Best Cinematography. The highest-grossing movie in the history of cinema, Avatar (2009), not only was shot on digital cameras as well, but also made the main revenues at the box office no longer by film, but digital projection. Major movies shot on digital video overtook those shot on film in 2013. Since 2016 over 90% of major films were shot on digital video. As of 2017, 92% of films are shot on digital. Only 24 major films released in 2018 were shot on 35mm. Since the 2000s, most movies across the world have been captured as well as distributed digitally. Today, cameras from companies like Sony, Panasonic, JVC and Canon offer a variety of choices for shooting high-definition video. At the high-end of the market, there has been an emergence of cameras aimed specifically at the digital cinema market. These cameras from Sony, Vision Research, Arri, Blackmagic Design, Panavision, Grass Valley and Red offer resolution and dynamic range that exceeds that of traditional video cameras, which are designed for the limited needs of broadcast television. == Technology == Digital cinematography captures motion pictures digitally in a process analogous to digital photography. While there is a clear technical distinction that separates the images captured in digital cinematography from video, the term "digital cinematography" is usually applied only in cases where digital acquisition is substituted for film acquisition, such as when shooting a feature film. The term is seldom applied when digital acquisition is substituted for video acquisition, as with live broadcast television programs. === Recording === ==== Cameras ==== Professional cameras include the Sony CineAlta (F) Series, Blackmagic Cinema Camera, Red One, Arri D-20, D-21 and Alexa, Panavision Genesis, Silicon Imaging SI-2K, Thomson Viper, Vision Research Phantom, IMAX 3D camera based on two Vision Research Phantom cores, Weisscam HS-1 and HS-2, GS Vitec noX, and the Fusion Camera System. Independent micro-budget filmmakers have also pressed low-cost consumer and prosumer cameras into service for digital filmmaking. Flagship smartphones like the Apple iPhone have been used to shoot movies like Unsane (shot on the iPhone 7 Plus) and Tangerine (shot on three iPhone 5S phones) and in January 2018, Unsane's director and Oscar winner Steven Soderbergh expressed an interest in filming other productions solely with iPhones going forward. ==== Sensors ==== Digital cinematography cameras capture digital images using image sensors, either charge-coupled device (CCD) sensors or CMOS active-pixel sensors, usually in one of two arrangements. Single chip cameras designed specifically for the digital cinematography market often use a single sensor (much like digital photo cameras), with dimensions similar in size to a 16 or 35 mm film frame or even (as with the Vision 65) a 65 mm film frame. An image can be projected onto a single large sensor exactly the same way it can be projected onto a film frame, so cameras with this design can be made with PL, PV and similar mounts, in order to use the wide range of existing high-end cinematography lenses available. Their large sensors also let these cameras achieve the same shallow depth of field as 35 or 65 mm motion picture film cameras, which many cinematographers consider an essential visual tool. Codecs Professional raw video recording codecs include Blackmagic Raw, Red Raw, Arri Raw and Canon Raw. ==== Video formats ==== Unlike other video formats, which are specified in terms of vertical resolution (for example, 1080p, which is 1920×1080 pixels), digital cinema formats are usually specified in terms of horizontal resolution. As a shorthand, these resolutions are often given in "nK" notation, where n is the multiplier of 1024 such that the horizontal resolution of a corresponding full-aperture, digitized film frame is exactly 1024 n {\displaystyle 1024n} pixels. Here the "K" has a customary meaning corresponding to the binary prefix "kibi" (ki). For instance, a 2K image is 2048 pixels wide, and a 4K image is 4096 pixels wide. Vertical resolutions vary with aspect ratios though; so a 2K image with an HDTV (16:9) aspect ratio is 2048×1152 pixels, while a 2K image with a SDTV or Academy ratio (4:3) is 2048×1536 pixels, and one with a Panavision ratio (2.39:1) would be 2048×856 pixels, and so on. Due to the "nK" notation not corresponding to specific horizontal resolutions per format a 2K image lacking, for example, the typical 35mm film soundtrack space, is only 182
Read more →
Content strategy

Content strategy guides the planning, development, and management of content. It is a recognized field in user experience design, and it also draws from adjacent disciplines such as information architecture, content management, business analysis, digital marketing, and technical communication. == Definitions == Content strategy has been described as planning for "the creation, publication, and governance of useful, usable content." It has also been called "a repeatable system that defines the entire editorial content development process for a website development project." In a 2007 article titled "Content Strategy: The Philosophy of Data," Rachel Lovinger describes the goal of content strategy as using "words and data to create unambiguous content that supports meaningful, interactive experiences." Here, she also provided the analogy that "content strategy is to copywriting as information architecture is to design." She encourages content strategists and collaborators to engage in early discussions about content meaning, models, and tools, to make sure strategy is integrated from the start rather than as an afterthought. The Content Strategy Alliance combines Kevin Nichols' definition with Kristina Halvorson's and defines content strategy as "getting the right content to the right user at the right time through strategic planning of content creation, delivery, and governance." == Practitioners == Content strategists are often familiar with a wide range of approaches, techniques, and tools. The perspectives that content strategists bring also depend heavily on their professional training and education. For instance, some specialize in "front-end strategy," which includes developing personas, journey mapping the user experience, aligning business strategy and user needs, developing a brand strategy, exploring different channels, and creating style guidelines and search engine optimization (SEO) guidelines. Others specialize in "back-end strategy," which includes creating content models, planning taxonomies and metadata, structuring content management systems, and building systems to support content reuse. Both roles involve addressing workflow and governance issues. Many organizations and individuals tend to confuse content strategists with editors. However, content strategy is "about more than just the written word," according to Washington State University associate professor Brett Atwood. For example, Atwood indicates that a practitioner needs to also "consider how content might be re-distributed and/or re-purposed in other channels of delivery." It has also been proposed that the content strategist performs the role of a curator. Just as a museum curator sifts through a collection of content and identifies key pieces that can be juxtaposed against each other to create meaning and spur excitement, a content strategist "must approach a business’s content as a medium that needs to be strategically selected and placed to engage the audience, convey a message, and inspire action."
Read more →
Groundswell (book)

Groundswell is a book by Forrester Research executives Charlene Li and Josh Bernoff that focuses on how companies can take advantage of emerging social technologies. It was published in 2008 by Harvard Business Press. A revised edition was published in 2011. The book attempts to explain a shift in the relationship between customers and companies, in which companies are no longer able to control customers' attitudes through market research, customer service, and advertising. Instead, customers are controlling the conversation by using new media to communicate about products and companies. == Synopsis == The groundswell is characterized by several tactics that guide companies into using social technologies strategically and effectively. Listening: Businesses should listen to their customers to understand what the market is looking for in their products. In order to do this, a company needs to find out if their customers are using social technologies and how they are using them. Talking: Instead of advertising to customers, marketing departments should find creative ways to connect with users about their experience with a product and their feelings about the brand. One common method is participation in social networks. Energizing: Enthusiastic customers are part of the groundswell, and companies can recognize and appreciate these customers by creating online communities and social platforms where they can connect with the brand and provide reviews. Supporting: Businesses can harness the support of their own employees by creating internal social applications for them to connect with the brand, also known as enterprise social software. == Groundswell in action == === Examples === Some companies distinguish their product through the use of social technologies. Tom Dickson successfully marketed his Blendtec line of blenders through the viral marketing campaign Will It Blend? The groundswell spread marketing messages through Digg and YouTube with a small budget and little marketing experience. Other companies have been able to listen to and talk with the groundswell by building their own online communities. Procter & Gamble created beinggirl.com Archived 2016-04-10 at the Wayback Machine to introduce girls to P&G feminine care products. The community approach worked because the company could reach girls with information that might seem embarrassing or sensitive in a traditional marketing campaign. === Risks === Features of particular industries or companies can make direct customer engagement more difficult. For instance, some companies must work within industry regulations, national or multinational corporations must balance corporate and local engagement, and other companies must find ways to engage with customers on time-sensitive issues. == Reception == Kevin Allison of the Financial Times praised the book for its focus on Web analytics: "[Groundswell] is not so much a manifesto or a dissection of online culture as it is a how-to manual for executives and mid-level managers trying to navigate this fast-changing and often confusing environment." The book won the American Marketing Association Foundation’s Berry-AMA Book Prize for best marketing book of 2009. It was also listed by: Amazon, as one of the Top 10 Business & Investing Books of 2008 CIO Insight, as one of the Top 10 Business-Tech Books of 2008 and one of 10 Insightful Web 2.0 Books Fortune as Magazine as one of the 3 best Web books of 2008 Advertising Age as number 3 of 10 Books You Should Have Read BusinessWeek as one of the Best Innovation & Design Books of 2008 "strategy+business" as one of the Best Business Books 2008 and “Top Shelf” in Marketing
Read more →
Computational semantics

Computational semantics is a subfield of computational linguistics. Its goal is to elucidate the cognitive mechanisms supporting the generation and interpretation of meaning in humans. It usually involves the creation of computational models that simulate particular semantic phenomena, and the evaluation of those models against data from human participants. While computational semantics is a scientific field, it has many applications in real-world settings and substantially overlaps with Artificial Intelligence. Broadly speaking, the discipline can be subdivided into areas that mirror the internal organization of linguistics. For example, lexical semantics and frame semantics have active research communities within computational linguistics. Some popular methodologies are also strongly inspired by traditional linguistics. Most prominently, the area of distributional semantics, which underpins investigations into embeddings and the internals of Large Language Models, has roots in the work of Zellig Harris. Some traditional topics of interest in computational semantics are: construction of meaning representations, semantic underspecification, anaphora resolution, presupposition projection, and quantifier scope resolution. Methods employed usually draw from formal semantics or statistical semantics. Computational semantics has points of contact with the areas of lexical semantics (word-sense disambiguation and semantic role labeling), discourse semantics, knowledge representation and automated reasoning (in particular, automated theorem proving). Since 1999 there has been an ACL special interest group on computational semantics, SIGSEM.
Read more →
Electronic submission

Electronic submission refers to the submission of a document by electronic means: that is, via e-mail or a web form on the Internet, or on an electronic medium such as a compact disc, a hard disk or a USB flash drive. Traditionally, the term "manuscript" referred to anything that was explicitly "written by hand". However, in popular usage and especially in the context of computers and the internet, the term "manuscript" may even refer to documents (text or otherwise) typed out or prepared on typewriters and computers and can be extended to digital photographs and videos, and online surveys too. In other words, any manuscript prepared and submitted online can be considered to be an electronic submission. == History and early usage == There is no concrete data indicating when and by whom were electronic submissions used for the first time. However, research based universities in several countries have been encouraging the collection of course assignments and projects in the form of electronic submissions for almost a decade now. Several governments and organizations are also switching to electronic submissions for the collection of research papers, grant applications and government application forms. == Types of electronic submissions == Since modern computers can store and process information and data in virtually any format and with the Internet allowing easy transfer of this data, the number of scenarios in which submissions can be collected electronically has increased exponentially in the last few years. Some of these scenarios are described below. In most of these scenarios, submissions were collected on hard paper until the Information Technology revolution occurred. === Academic Submissions === Teachers, professors and teaching assistants often collect course assignments and projects electronically. Electronic submissions are usually collected using a web-based system which more often than not also helps in the management of submissions collected and stored on it. (Explained By Henny L, University of Lethbridge, AB, Canada) === Research Papers === In call-for-paper or academic conferences, prospective presenters are usually asked to submit a short abstract or a full paper on their presentation or research work electronically, which is reviewed before being accepted for the conference. === Proposals for Grants === Several grant-giving organizations like the NSA, W3C, NIA, NIH etc. require grant seekers to submit a proposal which if accepted result in the desired grants. A majority of these proposals are now submitted electronically on systems that also help in the managing and tracking the proposals submitted. === Articles for Publication === Magazines, newspapers and other publishing houses have begun accepting electronic submissions for articles from various sources - both internal (by journalists and writers hired by them) as well as external (by users and popular readers). The submitted articles are stored on a server hosted by the publication house or by a third-party Archived 2019-10-13 at the Wayback Machine vendor and are usually evaluated before being given a green signal. === Contests and Competition Entries === Almost every kind of contest or competition requires participants to submit an entry in a format described by the organizers of the contest. If the contest is an Internet-based one, then the entries or nominations for the contest are collected electronically using e-mail or other electronic means depending on feasibility and the choice of the organizers. === Government Applications === The governments of several countries are turning to electronic submission of applications and forms for various government procedures. Electronic submissions allow easier management of the applications and forms submitted. === Legal documents === Many legal documents may be submitted to the courts electronically. In England and Wales, the Civil Procedure Rules include a suitable "document exchange" as an acceptable "method of service". Case law in employment law cases has established that where a claim is submitted electronically, a prudent legal adviser should "check that it has been received and there must be systems in place for doing that". === Resumés and CVs === It has become commonplace for job-seekers to submit soft copies (electronic versions) of their resumés and CVs to recruiting agencies and online job portals. This is usually done over the Internet using e-mail or a pre-hosted web-based system. == Submission management systems == The art and science of collecting and managing electronic submissions is called Submission Management. Certain software vendors have begun developing submission management systems to assist in the collection, tracking and management of complex submission processes realized electronically. Most of these systems are web based and accessible from any device with a browser and an Internet connection. However, a majority of these systems are application specific and cannot be applied to all submission management scenarios. == Resistance to electronic submissions == Despite the easier management and tracking of electronic submissions compared to their paper-based counterparts, widespread adoption and use of electronic submissions and systems for managing them has been hampered by several facts, which include but are not limited to: Inconvenience while drawing figures, diagrams and equations on a computer Resistance to change and adoption of new technologies Lack of or limited access to the Internet.
Read more →
Quality of experience

Quality of experience (QoE) is a measure of the delight or annoyance of a customer's experiences with a service (e.g., web browsing, phone call, TV broadcast). QoE focuses on the entire service experience; it is a holistic concept, similar to the field of user experience, but with its roots in telecommunication. QoE is an emerging multidisciplinary field based on social psychology, cognitive science, economics, and engineering science, focused on understanding overall human quality requirements. == Definition and concepts == In 2013, within the context of the COST Action QUALINET, QoE has been defined as:The degree of delight or annoyance of the user of an application or service. It results from the fulfillment of his or her expectations with respect to the utility and / or enjoyment of the application or service in the light of the user’s personality and current state.This definition has been adopted in 2016 by the International Telecommunication Union in Recommendation ITU-T P.10/G.100. Before, various definitions of QoE had existed in the domain, with the above-mentioned definition now finding wide acceptance in the community. QoE has historically emerged from Quality of Service (QoS), which attempts to objectively measure service parameters (such as packet loss rates or average throughput). QoS measurement is most of the time not related to a customer, but to the media or network itself. QoE however is a purely subjective measure from the user's perspective of the overall quality of the service provided, by capturing people's aesthetic and hedonic needs. QoE looks at a vendor's or purveyor's offering from the standpoint of the customer or end user, and asks, "What mix of goods, services, and support, do you think will provide you with the perception that the total product is providing you with the experience you desired and/or expected?" It then asks, "Is this what the vendor/purveyor has actually provided?" If not, "What changes need to be made to enhance your total experience?" In short, QoE provides an assessment of human expectations, feelings, perceptions, cognition and satisfaction with respect to a particular product, service or application. QoE is a blueprint of all human subjective and objective quality needs and experiences arising from the interaction of a person with technology and with business entities in a particular context. Although QoE is perceived as subjective, it is an important measure that counts for customers of a service. Being able to measure it in a controlled manner helps operators understand what may be wrong with their services and how to improve them. == QoE factors == QoE aims at taking into consideration every factor that contributes to a user's perceived quality of a system or service. This includes system, human and contextual factors. The following so-called "influence factors" have been identified and classified by Reiter et al.: Human Influence Factors Low-level processing (visual and auditory acuity, gender, age, mood, …) Higher-level processing (cognitive processes, socio-cultural and economic background, expectations, needs and goals, other personality traits…) System Influence Factors Content-related Media-related (encoding, resolution, sample rate, …) Network-related (bandwidth, delay, jitter, …) Device-related (screen resolution, display size, …) Context Influence Factors Physical context (location and space) Temporal context (time of day, frequency of use, …) Social context (inter-personal relations during experience) Economic context Task context (multitasking, interruptions, task type) Technical and information context (relationship between systems) Studies in the field of QoE have typically focused on system factors, primarily due to its origin in the QoS and network engineering domains. Through the use of dedicated test laboratories, the context is often sought to be kept constant. == QoE versus User Experience == QoE is strongly related to but different from the field of User Experience (UX), which also focuses on users' experiences with services. Historically, QoE has emerged from telecommunication research, while UX has its roots in Human–Computer Interaction. Both fields can be considered multi-disciplinary. In contrast to UX, the goal of improving QoE for users was more strongly motivated by economic needs. Wechsung and De Moor identify the following key differences between the fields: == QoE measurement == As a measure of the end-to-end performance at the service level from the user's perspective, QoE is an important metric for the design of systems and engineering processes. This is particularly relevant for video services because – due to their high traffic demands –, bad network performance may highly affect the user's experience. So, when designing systems, the expected output, i.e. the expected QoE, is often taken into account – also as a system output metric and optimization goal. To measure this level of QoE, human ratings can be used. The mean opinion score (MOS) is a widely used measure for assessing the quality of media signals. It is a limited form of QoE measurement, relating to a specific media type, in a controlled environment and without explicitly taking into account user expectations. The MOS as an indicator of experienced quality has been used for audio and speech communication, as well as for the assessment of quality of Internet video, television and other multimedia signals, and web browsing. Due to inherent limitations in measuring QoE in a single scalar value, the usefulness of the MOS is often debated. Subjective quality evaluation requires a lot of human resources, establishing it as a time-consuming process. Objective evaluation methods can provide quality results faster, but require dedicated computing resources. Since such instrumental video quality algorithms are often developed based on a limited set of subjective data, their QoE prediction accuracy may be low when compared to human ratings. QoE metrics are often measured at the end devices and can conceptually be seen as the remaining quality after the distortion introduced during the preparation of the content and the delivery through the network, until it reaches the decoder at the end device. There are several elements in the media preparation and delivery chain, and some of them may introduce distortion. This causes degradation of the content, and several elements in this chain can be considered as "QoE-relevant" for the offered services. The causes of degradation are applicable for any multimedia service, that is, not exclusive to video or speech. Typical degradations occur at the encoding system (compression degradation), transport network, access network (e.g., packet loss or packet delay), home network (e.g. WiFi performance) and end device (e.g. decoding performance). == QoE management == Several QoE-centric network management and bandwidth management solutions have been proposed, which aim to improve the QoE delivered to the end-users. When managing a network, QoE fairness may be taken into account in order to keep the users sufficiently satisfied (i.e., high QoE) in a fair manner. From a QoE perspective, network resources and multimedia services should be managed in order to guarantee specific QoE levels instead of classical QoS parameters, which are unable to reflect the actual delivered QoE. A pure QoE-centric management is challenged by the nature of the Internet itself, as the Internet protocols and architecture were not originally designed to support today's complex and high demanding multimedia services. As an example for an implementation of QoE management, network nodes can become QoE-aware by estimating the status of the multimedia service as perceived by the end-users. This information can then be used to improve the delivery of the multimedia service over the network and proactively improve the users' QoE. This can be achieved, for example, via traffic shaping. QoE management gives the service provider and network operator the capability to minimize storage and network resources by allocating only the resources that are sufficient to maintain a specific level of user satisfaction. As it may involve limiting resources for some users or services in order to increase the overall network performance and QoE, the practice of QoE management requires that net neutrality regulations are considered.
Read more →
Duck face

Duck face or duck lips is a photographic pose that is common on profile pictures in social networks. The lips are pressed together as in a pout and the cheeks are typically also sucked in. The pose is usually seen as an attempt to appear alluring, but it can be ironic or an attempt to hide self-conscious embarrassment. == History == Fashion models frequently use exaggerated pouts, and self-portraits with a pouty face go back to Rembrandt. In the 1994 film Four Weddings and a Funeral, one of the lead characters, Henrietta, played by Anna Chancellor, is nicknamed Duckface for her pouty expressions. Ben Stiller mocked models' pouty expressions in 1996 comedy sketches and the 2001 feature film Zoolander. The silly expressions made by his narcissistic character have retroactively been identified as an example of duck face. As social networks became popular, young women frequently made exaggeratedly pouty expressions. This became a major fad by the 2010s, provoking a strong negative reaction among some viewers. OxfordDictionaries.com added "duck face" as a new word in 2014 to their list of current and modern words, but it has not been added to the Oxford English Dictionary. In an animal communication studies of capuchin monkeys, the "duck face" term has been used synonymously with "protruded lip face", which females exhibit in the proceptive phase before mating.
Read more →
Sarpa (snakebite app)

Sarpa or SARPA (Snake Awareness, Rescue and Protection app) is a snakebite app, an application for mobile devices developed in India to provide rapid, life-saving help for victims of snakebite, which kill an estimated 58,000 people a year in India. The app provides information about snakes, gets fast aid for people bitten, and helps in the development of antivenoms. Similar systems developed in India include SnakeHub, Snake Lens, Snakepedia, Serpent and the Big Four Mapping Project. The apps provide rapid response to snakebite incidents, often in remote areas, using a network of volunteers managed by local wildlife departments; their use can save human lives by providing rapid medical care, and also snakes, by helping to avoid interaction between the species. In 2026, it was announced that the app had plans to offer real-time contact from doctors directly from the app to provide users with decision-making advice.
Read more →
Directed-energy weapon wildfire conspiracy theories

The directed-energy weapon wildfire conspiracy theories are claims circulating on social media and in fringe commentary that 2020s wildfires in places such as California, Hawaii and Texas were started or steered by directed-energy weapons or other lasers or directed-energy systems rather than by the documented ignition sources identified by investigators. Fact-checking organisations and newsrooms have repeatedly shown that widely shared images and clips said to depict “beams from the sky” are unrelated, miscaptioned or fabricated, and that official inquiries point to causes such as damaged or re-energised power lines, vegetation and extreme wind conditions. Coverage of the January 2025 Los Angeles fires described a resurgence of familiar hoaxes while local and federal agencies coordinated public rebuttals. == Background == Rumours linking directed-energy weapons to wildfire outbreaks appeared during earlier disaster seasons, then re-emerged at scale during the 2018 Camp Fire and again with the 2023 Maui wildfires and the 2025 Los Angeles fires. Journalists documented how large disasters reliably attract miscaptioned imagery and speculative narratives that portray official explanations as cover stories, while researchers and emergency managers noted that such claims tend to flourish during the information vacuum that accompanies fast-moving events. == Narratives and debunks == Recurring claims include assertions that videos show lasers igniting neighbourhoods, that “green” or “blue” items or roofs were spared because lasers cannot burn those colours, that trees remaining upright indicate precision targeting of houses, and that beams recorded over Hawaii or Texas came from secret platforms. Investigations show that a purported laser-strike video was actually an explosion at a Russian gas station recorded years earlier, that a photograph said to capture an “attack” was an Ohio gas flare from 2018, and that a separate video of green lights over Hawaii was captured months before the Maui fires by an astronomical camera and is unrelated. Fact-checks addressing colour myths have further explained that images of intact blue roofs were either misinterpreted or in at least one widely shared instance artificially generated, and that laser interaction with materials is not governed by such simplistic rules. == Investigations and identified causes == Authorities who examined specific incidents have published findings that contradict DEW narratives. A multi-agency investigation into the Maui disaster concluded that downed and later re-energised lines ignited an initial morning fire that re-kindled under extreme winds in the afternoon, with reports detailing the timeline and infrastructure context; summaries by national outlets echoed those conclusions. Investigators of the February 2024 Smokehouse Creek Fire in the Texas Panhandle reported that power lines ignited both the state’s largest wildfire and another major blaze, and the regional utility acknowledged its facilities appeared to have been involved; subsequent media coverage outlined the findings and regulatory follow-up. For the 2018 Camp Fire in Northern California, public reports from Butte County and subsequent proceedings identified PG&E transmission equipment as the source of ignition, with documentation of maintenance issues on the Caribou–Palermo line preceding the event. == Platform and agency responses == As major fires burned in and around Los Angeles in January 2025, officials from city agencies and national partners pursued a coordinated strategy to counter falsehoods by issuing timely updates, flagging fake imagery and directing residents to verified resources. Reporters described how federal emergency managers and local departments used social channels and briefings to rebut specific rumours, including claims about lasers and targeted ignition, and to clarify that early imagery often misleads during fast-moving disasters.
Read more →
Information Age

The Information Age is a historical period that began in the mid-20th century. It is characterized by a rapid shift from traditional industries, as established during the Industrial Revolution, to an economy centered on information technology. The onset of the Information Age has been linked to the development of the transistor in 1947. Advances in computer miniaturization, internet communication, and semiconductor technology enabled the rapid expansion of digital systems and global information networks. The Information Age transformed industries such as education, healthcare, finance, entertainment, and communication through digital infrastructure and connected technologies. The rise of smartphones and cloud-based services further accelerated global internet accessibility and digital interaction. == Digital applications and mobile technology == The expansion of Android and iOS ecosystems during the 21st century contributed to the widespread use of utility applications and mobile productivity tools. Applications related to calculations, scheduling, digital organization, and educational support became increasingly common on smartphones and tablets. Mobile utility software demonstrates how modern digital platforms support accessibility and everyday online services. Independent developers have contributed to this technological ecosystem through lightweight applications focused on mobile usability and internet-based functionality. == Influence on modern society == The Information Age has reshaped the way individuals communicate, consume information, and interact with digital services. Social media platforms, artificial intelligence systems, cloud storage, and mobile computing continue to influence modern economies and online communities worldwide. Emerging technologies such as the Internet of things, machine learning, and advanced automation are often associated with the transition toward the Fourth Industrial Revolution. == History == The digital revolution converted technology from analog format to digital format. By doing this, it became possible to make copies that were identical to the original. In digital communications, for example, repeating hardware was able to amplify the digital signal and pass it on with no loss of information in the signal. Of equal importance to the revolution was the ability to easily move the digital information between media and to access or distribute it remotely. One turning point of the revolution was the change from analog to digitally recorded music. During the 1980s, the digital format of optical compact discs gradually replaced analog formats, such as vinyl records and cassette tapes, as the popular medium of choice. === Previous inventions === Humans have manufactured tools for counting and calculating since ancient times, such as the abacus, astrolabe, equatorium, and mechanical timekeeping devices. More complicated devices started appearing in the 1600s, including the slide rule and mechanical calculators. By the early 1800s, the Industrial Revolution had produced mass-market calculators like the arithmometer and the enabling technology of the punch card. Charles Babbage proposed a mechanical general-purpose computer called the Analytical Engine, but it was never successfully built, and was largely forgotten by the 20th century, and unknown to most of the inventors of modern computers. The Second Industrial Revolution, in the last quarter of the 19th century, developed useful electrical circuits and the telegraph. In the 1880s, Herman Hollerith developed electromechanical tabulating and calculating devices using punch cards and unit record equipment, which became widespread in business and government. Meanwhile, various analog computer systems used electrical, mechanical, or hydraulic systems to model problems and calculate answers. These included an 1872 tide-predicting machine, differential analysers, perpetual calendar machines, the Deltar for water management in the Netherlands, network analyzers for electrical systems, and various machines for aiming military guns and bombs. The construction of problem-specific analog computers continued in the late 1940s and beyond, with FERMIAC for neutron transport, Project Cyclone for various military applications, and the Phillips Machine for economic modeling. Building on the complexity of the Z1 and Z2, German inventor Konrad Zuse used electromechanical systems to complete in 1941 the Z3, the world's first working programmable, fully automatic digital computer. Also, during World War II, Allied engineers constructed electromechanical bombes to break the German Enigma machine encoding. The base-10 electromechanical Harvard Mark I was completed in 1944, and was to some degree improved with inspiration from Charles Babbage's designs. === 1947–1969: Origins === In 1947, the first working transistor, the germanium-based point-contact transistor, was invented by John Bardeen and Walter Houser Brattain while working under William Shockley at Bell Labs. This led the way to more advanced digital computers. From the late 1940s, universities, the military, and businesses developed computer systems to digitally replicate and automate previously manually performed mathematical calculations, with the LEO being the first commercially available general-purpose computer. Digital communication became economical for widespread adoption after the invention of the personal computer in the 1970s. Claude Shannon, a Bell Labs mathematician, is generally credited with laying the foundations of digitalization in his pioneering 1948 article, A Mathematical Theory of Communication. In 1948, Bardeen and Brattain patented an insulated-gate transistor (IGFET) with an inversion layer. Their concept forms the basis of CMOS and DRAM technology today. In 1957, at Bell Labs, Frosch and Derick were able to manufacture planar silicon dioxide transistors, later a team at Bell Labs demonstrated a working MOSFET. The first integrated circuit milestone was achieved by Jack Kilby in 1958. Other important technological developments included the invention of the monolithic integrated circuit chip by Robert Noyce at Fairchild Semiconductor in 1959, made possible by the planar process developed by Jean Hoerni. In 1963, complementary MOS (CMOS) was developed by Chih-Tang Sah and Frank Wanlass at Fairchild Semiconductor. The self-aligned gate transistor, which further facilitated mass production, was invented in 1966 by Robert Bower at Hughes Aircraft and independently by Robert Kerwin, Donald Klein, and John Sarace at Bell Labs. In 1962, AT&T deployed the T-carrier for long-haul pulse-code modulation (PCM) digital voice transmission. The T1 format carried 24 pulse-code modulated, time-division multiplexed speech signals, each encoded in 64 kbit/s streams, leaving 8 kbit/s of framing information, which facilitated the synchronization and demultiplexing at the receiver. Over the subsequent decades, the digitisation of voice became the norm for all but the last mile (where analogue continued to be the norm right into the late 1990s). Following the development of MOS integrated circuit chips in the early 1960s, MOS chips reached higher transistor density and lower manufacturing costs than bipolar integrated circuits by 1964. MOS chips further increased in complexity at a rate predicted by Moore's law, leading to large-scale integration (LSI) with hundreds of transistors on a single MOS chip by the late 1960s. The application of MOS LSI chips to computing was the basis for the first microprocessors, as engineers began recognizing that a complete computer processor could be contained on a single MOS LSI chip. In 1968, Fairchild engineer Federico Faggin improved MOS technology with his development of the silicon-gate MOS chip, which he later used to develop the Intel 4004, the first single-chip microprocessor. It was released by Intel in 1971 and laid the foundations for the microcomputer revolution that began in the 1970s. MOS technology also led to the development of semiconductor image sensors suitable for digital cameras. The first such image sensor was the charge-coupled device, developed by Willard S. Boyle and George E. Smith at Bell Labs in 1969, based on MOS capacitor technology. === 1969–1989: Invention of the internet, rise of home computers === The public was first introduced to the concepts that led to the Internet when a message was sent over the ARPANET in 1969. Packet switched networks such as ARPANET, Mark I, CYCLADES, Merit Network, Tymnet, and Telenet, were developed in the late 1960s and early 1970s using a variety of protocols. The ARPANET in particular led to the development of protocols for internetworking, in which multiple separate networks could be joined into a network of networks. The Whole Earth movement of the 1960s advocated the use of new technology. In the 1970s, the home computer was introduced, time-sharing computers, the video game console, the first coin-op vide
Read more →
T.38

T.38 is an ITU recommendation for allowing transmission of fax over IP networks (FoIP) in real time. == History == The T.38 fax relay standard was devised in 1998 as a way to transport faxes across IP networks between existing Group 3 (G3) fax terminals. T.4 and related fax standards were published by the ITU in 1980, before the rise of the Internet. In the late 1990s, VoIP, or voice over IP, began to gain ground as an alternative to the conventional public switched telephone network (PSTN). However, because most VoIP systems are optimized (through their use of aggressive lossy bandwidth-saving compression) for voice rather than data calls, conventional fax machines worked poorly or not at all on them due to the network impairments such as delay, jitter, packet loss, and so on. Thus, some way of transmitting fax over IP was needed. == Overview == In practical scenarios, a T.38 fax call has at least part of the call being carried over PSTN, although this is not required by the T.38 definition, and two T.38 devices can send faxes to each other. This particular type of device is called Internet-Aware Fax device, or IAF, and it is capable of initiating or completing a fax call towards the IP network. The typical scenario where T.38 is used is – T.38 fax relay – where a T.30 fax device sends a fax over PSTN to a T.38 fax gateway which converts or encapsulates the T.30 protocol into a T.38 data stream. This is then sent either to a T.38-enabled end point such as fax machine or fax server or another T.38 gateway that converts it back to a PSTN PCM or analog signal and terminates the fax on a T.30 device. The T.38 recommendation defines the use of both TCP and UDP to transport T.38 packets. Implementations tend to use UDP, due to TCP's requirement for acknowledgement packets and resulting retransmission during packet loss, which introduces delays. When using UDP, T.38 copes with packet loss by using redundant data packets. T.38 is not a call setup protocol, thus the T.38 devices need to use standard call setup protocols to negotiate the T.38 call, e.g. H.323, SIP & MGCP. == Operation == There are two primary ways that fax transactions are conveyed across packet networks. The T.37 standard specifies how a fax image is encapsulated in e-mail and transported, ultimately, to the recipient using a store-and-forward process through intermediary entities. T.38, however, defines a protocol that supports the use of the T.30 protocol in both the sender and recipient terminals. (See diagram above.) T.38 lets one transmit a fax across an IP network in real time, just as the original G3 fax standards did for the traditional (time-division multiplexed (TDM)) network, also called the public switched telephone network or PSTN. A special protocol is needed for real-time fax over IP (Internet Protocol) since existing fax terminals only supported PSTN connections, where the information flow was generally smooth and uninterrupted, as opposed to the jittery arrival of IP packets. The trick was to come up with a protocol that makes the IP network “invisible” to the endpoint fax terminals, which would mean the user of a legacy fax terminal need not know that the fax call was traversing an IP network. The network interconnections supported by T.38 are shown above. The two fax terminals on either side of the figure communicate using the T.30 fax protocol published by the ITU in 1980. Interconnection of the PSTN with the IP packet network requires a “gateway” between the PSTN and IP networks. PSTN-IP Gateways support TDM voice on the PSTN side and VoIP and FoIP on the packet side. For voice sessions, the gateway will take in voice packets on the IP side, accumulate a few packets to ensure a smooth flow of TDM data upon their release, and then meter them out over TDM where they eventually are heard by a human or stored on a computer for later playback. The gateway employs packet-management techniques to enhance the quality of the speech in the presence of network errors by taking advantage of the natural ability of a listener to not really hear the occasional missing or repeated packet. But facsimile data are transmitted by modems, which aren't as forgiving as the human ear is for speech. Missing packets will often cause a fax session to fail at worst or create one or more image lines in error at best. So the job of T.38 is to “fool” the terminal into “thinking” that it's communicating directly with another T.30 terminal. It will also correct for network delays with so-called spoofing techniques, and missing or delayed packets with fax-aware buffer-management techniques. Spoofing refers to the logic implemented in the protocol engine of a T.38 relay that modifies the protocol commands and responses on the TDM side to keep network delays on the IP side from causing the transaction to fail. This is done, for example, by padding image lines or deliberately causing a message to be re-transmitted to render network delays transparent to the sending/receiving fax terminals. Networks that do not have packet loss or excessive delay can exhibit acceptable fax performance without T.38, provided the PCM clocks in all gateways are of very high accuracy (explained below). T.38 not only removes the effect of PCM clocks not being synchronized, but also reduces the required network bandwidth by a factor of 10, while it corrects for packet loss and delay. === Bandwidth reduction === As shown in the diagram below, a T.38 gateway is composed of two primary elements: the fax modems and the T.38 subsystem. The fax modems modulate and demodulate the PCM samples of the analog data, turning the sampled-data representation of the fax terminal's analog signal to its binary translation, and vice versa. The PSTN network samples the analog signal of a voice or modem signal (it doesn't know the difference) 8,000 times per second (SPS), and encodes them as 8-bit data bytes. This means 8000 samples-per-second times 8-bits per sample, or 64,000 bits per second (bit/s) to represent the modem (or voice) data in one direction. For both directions the modem transaction consumes 128,000 bits of network bandwidth. However, the typical modem in a fax terminal transmits the image data at 33,600 bit/s, so if the analog data are first converted to the digital content they represent, only 33,600 bits (plus network overhead of a few bytes) are needed. And since T.30 fax is a half-duplex protocol, the network is only needed for one direction at a time. Refer to RFC 3261 === PCM clock synchronization === In the diagram above, there is a sample-rate clock in the fax terminal and one in the gateway's modems that is used to trigger the sampling of the analog line 8,000 times per second. These clocks are usually quite accurate, but in some low-cost terminal adapters (a one or two-line gateway) the PCM clock can be surprisingly inaccurate. If the terminal is sending data to the gateway, and the gateway's clock is too slow, the buffers (jitter buffers) in the gateway will eventually overflow, causing the transaction to fail. Since the difference is often quite small, this problem occurs on long, detailed fax images giving the clocks more time to cause the jitter buffer in gateway to either underflow or overflow, which is just the same as missing or duplicated packets. === Packet loss === T.38 provides facilities to eliminate the effects of packet loss through data redundancy. When a packet is sent, either zero, one, two, three, or even more of the previously sent packets are repeated. (The specification does not impose a limit.) This increases the network bandwidth required (it's still much less than not using T.38) but it allows the receiving gateway to reconstruct the complete packet sequence, even with a fairly high level of packet loss. == Related standards == T.4 is the umbrella specification for fax. It specifies the standard image sizes, two forms of image-data compression (encoding), the image-data format, and references, T.30 and the various modem standards. T.6 specifies a compression scheme that reduces the time required to transmit an image by roughly 50-percent. T.30 specifies the procedures that a sending and receiving terminal use to set up a fax call, determine the image size, encoding, and transfer speed, the demarcation between pages, and the termination of the call. T.30 also references the various modem standards. V.21, V.27ter, V.29, V.17, V.34: ITU modem standards used in facsimile. The first three were ratified prior to 1980, and were specified in the original T.4 and T.30 standards. V.34 was published for fax in 1994. T.37 The ITU standard for sending a fax-image file via e-mail to the intended recipient of a fax. G.711 pass through - this is where the T.30 fax call is carried in a VoIP call encoded as audio. This is sensitive to network packet loss, jitter and clock synchronization. When using voice high-compression encoding techniques such as, but not limited to, G.729, some fax tonal signa
Read more →
30 Boxes

30 Boxes is a minimalist calendaring IOS application created by 83 Degrees. Originating as a web application in March 2006, 30 Boxes was founded by Webshots cofounder Narendra Rocherolle. The website shut down some time in 2020, but relaunched for the IOS in February 2021. The original website was tailored towards "social media junkies". == Reception == Barry Collins of The Sunday Times appreciated the website's plain-language event adding feature, but did not appreciate that he was unable to see more than one month of events at a time. Collins was also unhappy that the website was not capable of warning him when he had two events scheduled at the same time. In a list of the best web-based calendar software for small businesses, Forbes ranked 30 Boxes second, after Google Calendar. They described 30 Boxes like “buying a new car with manual transmission and lots of extras—you don't just want to drive it, you want to fool around with it to see what it can do”.
Read more →
Digital anthropology

Digital anthropology is the anthropological study of the relationship between humans and digital-era technology. The field is new, and thus has a variety of names with a variety of emphases. These include techno-anthropology, digital ethnography, cyberanthropology, and virtual anthropology. == Definition and scope == Most anthropologists who use the phrase "digital anthropology" are specifically referring to online and Internet technology. The study of humans' relationship to a broader range of technology may fall under other subfields of anthropological study, such as cyborg anthropology. The Digital Anthropology Group (DANG) is classified as an interest group in the American Anthropological Association. DANG's mission includes promoting the use of digital technology as a tool of anthropological research, encouraging anthropologists to share research using digital platforms, and outlining ways for anthropologists to study digital communities. Cyberspace or the "virtual world" itself can serve as a "field" site for anthropologists, allowing the observation, analysis, and interpretation of the sociocultural phenomena springing up and taking place in any interactive space. National and transnational communities, enabled by digital technology, establish a set of social norms, practices, traditions, storied history and associated collective memory, migration periods, internal and external conflicts, potentially subconscious language features and memetic dialects comparable to those of traditional, geographically confined communities. This includes the various communities built around free and open-source software, online platforms such as Facebook, Twitter/X, Instagram, 4chan and Reddit and their respective sub-sites, and politically motivated groups like Anonymous, WikiLeaks, or the Occupy movement. A number of academic anthropologists have conducted traditional ethnographies of virtual worlds, such as Bonnie Nardi's study of World of Warcraft or Tom Boellstorff's study of Second Life. Academic Gabriella Coleman has done ethnographic work on the Debian software community and the Anonymous hacktivist network. Theorist Nancy Mauro-Flude conducts ethnographic field work on computing arts and computer subcultures such as systerserver.net a part of the communities of feminist web servers and the Feminist Internet network. Eitan Y. Wilf examines the intersection of artists' creativity and digital technology and artificial intelligence. Yongming Zhou studied how in China the internet is used to participate in politics. Eve M. Zucker and colleagues study the shift to digital memorialization of mass atrocities and the emergent role of artificial intelligence in these processes. Victoria Bernal conducted ethnographic research on the themes of nationalism and citizenship among Eritreans participating in online political engagement with their homeland. Anthropological research can help designers adapt and improve technology. Australian anthropologist Genevieve Bell did extensive user experience research at Intel that informed the company's approach to its technology, users, and market. == Methodology == === Digital fieldwork === Many digital anthropologists who study online communities use traditional methods of anthropological research. They participate in online communities in order to learn about their customs and worldviews, and back their observations with private interviews, historical research, and quantitative data. Their product is an ethnography, a qualitative description of their experience and analyses. Other anthropologists and social scientists have conducted research that emphasizes data gathered by websites and servers. However, academics often have trouble accessing user data on the same scale as social media corporations like Facebook and data mining companies like Acxiom. In terms of method, there is a disagreement in whether it is possible to conduct research exclusively online or if research will only be complete when the subjects are studied holistically, both online and offline. Tom Boellstorff, who conducted a three-year research as an avatar in the virtual world Second Life, defends the first approach, stating that it is not just possible, but necessary to engage with subjects “in their own terms”. Others, such as Daniel Miller, have argued that an ethnographic research should not exclude learning about the subject's life outside the internet. === Digital technology as a tool of anthropology === The American Anthropological Association offers an online guide for students using digital technology to store and share data. Data can be uploaded to digital databases to be stored, shared, and interpreted. Text and numerical analysis software can help produce metadata, while a codebook may help organize data. == Ethics == Online fieldwork offers new ethical challenges. According to the American Anthropological Association's ethics guidelines, anthropologists researching a community must make sure that all members of that community know they are being studied and have access to data the anthropologist produces. However, many online communities' interactions are publicly available for anyone to read, and may be preserved online for years. Digital anthropologists debate the extent to which lurking in online communities and sifting through public archives is ethical. The Association also asserts that anthropologists' ability to collect and store data at all is "a privilege", and researchers have an ethical duty to store digital data responsibly. This means protecting the identity of participants, sharing data with other anthropologists, and making backup copies of all data. == Prominent figures == Genevieve Bell is an Australian cultural anthropologist credited for pioneering the User Experience field. During her time working for Intel Corporation, Bell studied how various cultures from around the world interacted with and experienced technology. Researching and improving user experience allows companies and designers to gather data regarding how users utilize their digital products and what requires improvement or expansion. Tom Boellstorff is an anthropologist known for Coming of Age in Second Life: An Anthropologist Explores the Virtually Human where he conducted research on how engaging in virtual worlds affects the player’s sense of self. Gabriella Coleman is an American anthropologist concerned with the politics, ethics, and culture of hacking and online activism. Coleman’s most notable ethnography features the hacktivist collective Anonymous, where she argues that various genres of hacking exist according to the social conditions at play. Coleman is dedicated to making her ethnography accessible to a diverse audience, including academics and non-academics. Diana E. Forsythe was an American anthropologist of science and technology and the author of the essays featured in Studying Those Who Study Us: An Anthropologist in the World of Artificial Intelligence. She asked relevant questions such as how should humans interact with computers and how gender roles are maintained in technology-oriented occupations. Heather Horst is a sociocultural anthropologist interested in the relationship between digital social relations and material culture. Nancy Mauro-Flude is a design anthropologist whose work explores the tacit relations between embodied cognition, computational materiality, maker culture, self-hosted webserver cooperatives, creative practice, and artistic research in digital infrastructure and Internet publishing. Mizuko Ito is a Japanese cultural anthropologist specializing in technology use and the intersection between computers and the social sciences. Her primary interest is in how young people utilize media technology and how it can be used to engage students in education. Daniel Miller is an anthropologist with a concentration in digital anthropology. His research includes the smartphone and perpetual opportunism, the intent and consequences of posting on social media in various geographical locations, and how hospice patients use media to socialize in the last stage of their lives. Mike Wesch is a cultural anthropologist interested in how people share their lives, cultures, and beliefs through digital media.
Read more →
Hardware compatibility list

A hardware compatibility list (HCL) is a list of computer hardware (typically including many types of peripheral devices) that is compatible with a particular operating system or device management software. The list contains both whole computer systems and specific hardware elements including motherboards, sound cards, and video cards. In today's world, there is a vast amount of computer hardware in circulation, and many operating systems too. A hardware compatibility list is a database of hardware models and their compatibility with a certain operating system. HCLs can be centrally controlled (one person or team keeps the list of hardware maintained) or user-driven (users submit reviews on hardware they have used). There are many HCLs. Usually, each operating system will have an official HCL on its website.
Read more →