AI Assistant Grok

AI Assistant Grok — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Autognostics

    Autognostics

    Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware. It is considered one of the major components of Autonomic Networking. == Introduction == One of the most important characteristics of today's Internet that has contributed to its success is its basic design principle: a simple and transparent core with intelligence at the edges (the so-called "end-to-end principle"). Based on this principle, the network carries data without knowing the characteristics of that data (e.g., voice, video, etc.) - only the end-points have application-specific knowledge. If something goes wrong with the data, only the edge may be able to recognize that since it knows about the application and what the expected behavior is. The core has no information about what should happen with that data - it only forwards packets. Although an effective and beneficial attribute, this design principle has also led to many of today's problems, limitations, and frustrations. Currently, it is almost impossible for most end-users to know why certain network-based applications do not work well and what they need to do to make it better. Also, network operators who interact with the core in low-level terms such as router configuration have problems expressing their high-level goals into low-level actions. In high-level terms, this may be summarized as a weak coupling between the network and application layers of the overall system. As a consequence of the Internet end-to-end principle, the network performance experienced by a particular application is difficult to attribute based on the behavior of the individual elements. At any given moment, the measure of performance between any two points is typically unknown and applications must operate blindly. As a further consequence, changes to the configuration of given element, or changes in the end-to-end path, cannot easily be validated. Optimization and provisioning cannot then be automated except against only the simplest design specifications. There is an increasing interest in Autonomic Networking research, and a strong conviction that an evolution from the current networking status quo is necessary. Although to date there have not been any practical implementations demonstrating the benefits of an effective autonomic networking paradigm, there seems to be a consensus as to the characteristics which such implementations would need to demonstrate. These specifically include continuous monitoring, identifying, diagnosing and fixing problems based on high-level policies and objectives. Autognostics, as a major part of the autonomic networking concept, intends to bring networks to a new level of awareness and eliminate the lack of visibility which currently exists in today's networks. == Definition == Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware, in part and as a whole, and dynamically adapt to the applications running on them by autonomously monitoring, identifying, diagnosing, resolving issues, subsequently verifying that any remediation was successful, and reporting the impact with respect to the application's use (i.e., providing visibility into the changes to networks and their effects). Although similar to the concept of network awareness, i.e., the capability of network devices and applications to be aware of network characteristics (see References section below), it is noteworthy that autognostics takes that concept one step further. The main difference is the auto part of autognostics, which entails that network devices are self-aware of network characteristics, and have the capability to adapt themselves as a result of continuous monitoring and diagnostics. == Path to autognostics == Autognostics, or in other words deep self-knowledge, can be best described as the ability of a network to know itself and the applications that run on it. This knowledge is used to autonomously adapt to dynamic network and application conditions such as utilization, capacity, quality of service/application/user experience, etc. In order to achieve autognosis, networks need a means to: Continuously monitor/test the network for application-specific performance Analyze the monitoring/test data to detect problems (e.g., performance degradation) Diagnose, identify and localize sources of degradation Automatically take actions to resolve problems via remediation/provisioning Verify the problems have been resolved (potentially rolling back changes if ineffective) Subsequently, continue to monitor/test for performance

    Read more →
  • Chainer

    Chainer

    Chainer is an open source deep learning framework written purely in Python on top of NumPy and CuPy Python libraries. The development is led by Japanese venture company Preferred Networks in partnership with IBM, Intel, Microsoft, and Nvidia. Chainer is notable for its early adoption of "define-by-run" scheme, as well as its performance on large scale systems. The first version was released in June 2015 and has gained large popularity in Japan since then. Furthermore, in 2017, it was listed by KDnuggets in top 10 open source machine learning Python projects. In December 2019, Preferred Networks announced the transition of its development effort from Chainer to PyTorch and it will only provide maintenance patches after releasing v7. == Define-by-run == Chainer was the first deep learning framework to introduce the define-by-run approach. The traditional procedure to train a network was in two phases: define the fixed connections between mathematical operations (such as matrix multiplication and nonlinear activations) in the network, and then run the actual training calculation. This is called the define-and-run or static-graph approach. Theano and TensorFlow are among the notable frameworks that took this approach. In contrast, in the define-by-run or dynamic-graph approach, the connection in a network is not determined when the training is started. The network is determined during the training as the actual calculation is performed. One of the advantages of this approach is that it is intuitive and flexible. If the network has complicated control flows such as conditionals and loops, in the define-and-run approach, specially designed operations for such constructs are needed. On the other hand, in the define-by-run approach, programming language's native constructs such as if statements and for loops can be used to describe such flow. This flexibility is especially useful to implement recurrent neural networks. Another advantage is ease of debugging. In the define-and-run approach, if an error (such as numeric error) has occurred in the training calculation, it is often difficult to inspect the fault, because the code written to define the network and the actual place of the error are separated. In the define-by-run approach, you can just suspend the calculation with the language's built-in debugger and inspect the data that flows on your code of the network. Define-by-run has gained popularity since the introduction by Chainer and is now implemented in many other frameworks, including PyTorch and TensorFlow. == Extension libraries == Chainer has four extension libraries, ChainerMN, ChainerRL, ChainerCV and ChainerUI. ChainerMN enables Chainer to be used on multiple GPUs with performance significantly faster than other deep learning frameworks. A supercomputer running Chainer on 1024 GPUs processed 90 epochs of ImageNet dataset on ResNet-50 network in 15 minutes, which is four times faster than the previous record held by Facebook. ChainerRL adds state of art deep reinforcement learning algorithms, and ChainerUI is a management and visualization tool. == Applications == Chainer is used as the framework for PaintsChainer, a service which does automatic colorization of black and white, line only, draft drawings with minimal user input.

    Read more →
  • Yann LeCun

    Yann LeCun

    Yann André Le Cun ( lə-KUN; French: [ləkœ̃]; usually spelled LeCun; born 8 July 1960) is a French-American computer scientist working in the fields of artificial intelligence, machine learning, computer vision, robotics and image compression. He is the Jacob T. Schwartz Professor of Computer Science at the Courant Institute of Mathematical Sciences at New York University. He served as Chief AI Scientist at Meta Platforms before co-founding Advanced Machine Intelligence Labs in December 2025. He is well known for his work on optical character recognition and computer vision using convolutional neural networks (CNNs). He is also one of the main creators of the DjVu image compression technology, alongside Léon Bottou and Patrick Haffner. He co-developed the Lush programming language with Léon Bottou. In 2018, LeCun, Yoshua Bengio, and Geoffrey Hinton received the Turing Award from the Association for Computing Machinery (ACM) for their work on deep learning. LeCun, Bengio, and Hinton, and occasionally Jürgen Schmidhuber, are sometimes referred to as the "Godfathers of AI" and "Godfathers of Deep Learning". == Early life and education == Yann André Le Cun was born on 8 July 1960 at Soisy-sous-Montmorency, in the suburbs of Paris. His surname, Le Cun, derives from the old Breton form Le Cunff and originates from the region of Guingamp in northern Brittany. Yann is the Breton form of Jean, the French form of John. He received a Diplôme d'Ingénieur from the ESIEE Paris in 1983 and a PhD in computer science from Université Pierre et Marie Curie (now Sorbonne University) in 1987, during which he proposed an early form of backpropagation, an algorithm crucial for enabling neural networks to learn. Before joining AT&T, LeCun was a postdoctoral researcher for a year, starting in 1987, supervised by Geoffrey Hinton at the University of Toronto. LeCun has three sons, and his brother is employed by Google. He has American citizenship. == Career and research == LeCun's career has been spent primarily at Bell Labs, New York University and Meta Platforms, Inc. === Bell Labs === In 1988, LeCun joined the Adaptive Systems Research Department at AT&T Bell Laboratories in Holmdel, New Jersey, United States, headed by Lawrence D. Jackel, where he developed a number of new machine learning methods, such as a biologically inspired model of image recognition called convolutional neural networks (LeNet), the "Optimal Brain Damage" regularization methods, and the Graph Transformer Networks method (similar to conditional random field), which he applied to handwriting recognition and Optical character recognition (OCR). The bank check recognition system that he helped develop was widely deployed by NCR and other companies. In 1996, he joined AT&T Labs-Research as head of the Image Processing Research Department, which was part of Lawrence Rabiner's Speech and Image Processing Research Lab, and worked primarily on the DjVu image compression technology, a format designed for efficient distribution of scanned documents, and used by the Internet Archive to provide access to digitized texts. His collaborators at AT&T include Léon Bottou and Vladimir Vapnik. === New York University === After a brief tenure as a fellow of NEC Research Institute, LeCun joined New York University in 2003, where he is Jacob T. Schwartz Chaired Professor of Computer Science and Neural Science at the Courant Institute of Mathematical Sciences and the Center for Neural Science. At NYU, he has worked primarily on energy-based models for supervised and unsupervised learning, feature learning for object recognition in computer vision, and mobile robotics. In 2012, he became the founding director of the NYU Center for Data Science. On 9 December 2013, LeCun became the first director of Meta AI Research in New York City and in early 2014 stepped down from the NYU–CDS directorship. In 2013, he and Yoshua Bengio co-founded the International Conference on Learning Representations, which adopted a post-publication open review process he previously advocated on his website. He was the chair and organiser of the "Learning Workshop" held every year between 1986 and 2012 in Snowbird, Utah. He is a member of the Science Advisory Board of the Institute for Pure and Applied Mathematics at UCLA. He is the co-director of the Learning in Machines and Brain research program (formerly Neural Computation & Adaptive Perception) of CIFAR. In 2016, he was the visiting professor of computer science on the Chaire Annuelle Informatique et Sciences Numériques at Collège de France in Paris, where he presented the leçon inaugurale (inaugural lecture). In 2023, he was named as the inaugural Jacob T. Schwartz Chaired Professor in Computer Science at NYU's Courant Institute. LeCun is also a scientific advisor to French research group Kyutai which is being funded by Xavier Niel, Rodolphe Saadé, Eric Schmidt, and others. === Meta Platforms === LeCun joined Facebook (now Meta Platforms) in 2013 as chief AI scientist and led the company's AI research laboratory, FAIR. === AMI Labs === On 19 November 2025, LeCun confirmed that he would be leaving Meta after ten years to found his own company focused on world-model architectures and human-like artificial intelligence he calls superintelligence. The company he founded, Advanced Machine Intelligence Labs (or AMI Labs), is run by CEO Alex LeBrun, with LeCun serving as Executive Chair. This venture is focused on building AI "world models": systems that learn to understand the physical world's structure and dynamics rather than just predict text like large language models. In March 2026, AMI announced it had raised $1.03 billion in funding at a $3.5 billion pre-money valuation. The funding round was co-led by investors including Cathay Innovation, Greycroft, Hiro Capital, HV Capital and Bezos Expeditions. In January 2026, LeCun became founding chair of the Technical Research Board of Logical Intelligence, an AI company developing energy-based (EBM) reasoning systems. == Honours and awards == LeCun is a member of the US National Academy of Sciences, National Academy of Engineering and the French Académie des Sciences. He has received honorary doctorates from Instituto Politécnico Nacional (IPN) in Mexico City in 2016, from EPFL in 2018, from Université Côte d'Azur in 2021, from Università di Siena in 2023, and from Hong Kong University of Science and Technology in 2023. In 2014, he received the IEEE Neural Network Pioneer Award and in 2015, the PAMI Distinguished Researcher Award. In 2018, LeCun was awarded the IRI Medal, established by the Industrial Research Institute (IRI), and the Harold Pender Award, given by the University of Pennsylvania. In 2019, he received the Golden Plate Award of the American Academy of Achievement. In March 2019, LeCun won the 2018 Turing Award, sharing it with Yoshua Bengio and Geoffrey Hinton. In 2022, he received the Princess of Asturias Award in the category "Scientific Research", along with Yoshua Bengio, Geoffrey Hinton and Demis Hassabis. In 2023, the President of France made him a Chevalier (Knight) of the French Legion of Honour. During the World Economic Forum (WEF) 2024 in Davos, he received the Global Swiss AI Award 2023. The same year, he received the grand prize of the VinFuture Prize alongside Yoshua Bengio, Jensen Huang, Geoffrey Hinton, and Fei-Fei Li for their groundbreaking contributions to neural networks and deep learning algorithms. In 2025 he was awarded the Queen Elizabeth Prize for Engineering jointly with Yoshua Bengio, Bill Dally, Geoffrey E. Hinton, John Hopfield, Jensen Huang and Fei-Fei Li.

    Read more →
  • Otterly.ai

    Otterly.ai

    Otterly.ai is an Austrian software company, founded in 2024, that provides tools for generative engine optimization, the practice of monitoring and optimizing results in large language models. == History == Otterly.ai was co-founded in 2024 by Thomas Peham, Klaus-M. Schremser and Josef Trauner. The concept for OtterlyAI was developed in response to the increasing use of generative AI tools in digital search and content discovery. The company announced a technology partnership with SEO platform Semrush in January 2025.

    Read more →
  • Robotic process automation

    Robotic process automation

    Robotic process automation (RPA) is a form of business process automation that is based on software robots (bots) or artificial intelligence (AI) agents. RPA should not be confused with artificial intelligence as it is based on automation technology following a predefined workflow. It is sometimes referred to as software robotics (not to be confused with robot software). In traditional workflow automation tools, a software developer produces a list of actions to automate a task and interface to the back end system using internal application programming interfaces (APIs) or dedicated scripting language. In contrast, RPA systems develop the action list by watching the user perform that task in the application's graphical user interface (GUI) and then perform the automation by repeating those tasks directly in the GUI. This can lower the barrier to the use of automation in products that might not otherwise feature APIs for this purpose. RPA tools have strong technical similarities to graphical user interface testing tools. These tools also automate interactions with the GUI, and often do so by repeating a set of demonstration actions performed by a user. RPA tools differ from such systems in that they allow data to be handled in and between multiple applications, for instance, receiving email containing an invoice, extracting the data, and then typing that into a bookkeeping system. == Historic evolution == As a form of automation, the concept has been around for a long time in the form of screen scraping, so long that to early PC users the reminder of it often blurs with the idea of malware infection. Yet compared to screen scraping, RPA is much more extensible, consisting of API integration into other enterprise applications, connectors into ITSM systems, terminal services and even some types of AI (e.g. machine learning) services such as image recognition. It is considered to be a significant technological evolution in the sense that new software platforms are emerging which are sufficiently mature, resilient, scalable and reliable to make this approach viable for use in large enterprises (who would otherwise be reluctant due to perceived risks to quality and reputation). == Use == The hosting of RPA services also aligns with the metaphor of a software robot, with each robotic instance having its own virtual workstation, much like a human worker. The robot uses keyboard and mouse controls to take actions and execute automations. Normally, all of these actions take place in a virtual environment and not on screen; the robot does not need a physical screen to operate, rather it interprets the screen display electronically. The scalability of modern solutions based on architectures such as these owes much to the advent of virtualization technology, without which the scalability of large deployments would be limited by the available capacity to manage physical hardware and by the associated costs. The implementation of RPA in business enterprises has shown dramatic cost savings when compared to traditional non-RPA solutions. === RPA actual use === Banking and finance process automation Mortgage and lending processes Customer care automation eCommerce merchandising operations Social media marketing Optical character recognition applications Data extraction process Fixed automation process Manual and repetitive tasks automation Voice recognition and digital dictation software linked to join up business processes for straight through processing without manual intervention Specialised remote infrastructure management software featuring automated investigation and resolution of problems, using robots for the first line IT support Chatbots used by internet retailers and service providers to service customer requests for information. Also used by companies to service employee requests for information from internal databases Presentation layer automation software, increasingly used by business process outsourcers to displace human labour Interactive voice response (IVR) systems incorporating intelligent interaction with callers == Impact on employment == According to Harvard Business Review, most operations groups adopting RPA have promised their employees that automation would not result in layoffs. Instead, workers have been redeployed to do more interesting work. One academic study highlighted that knowledge workers did not feel threatened by automation: they embraced it and viewed the robots as team-mates. The same study highlighted that, rather than resulting in a lower "headcount", the technology was deployed in such a way as to achieve more work and greater productivity with the same number of people. Conversely, however, some analysts proffer that RPA represents a threat to the business process outsourcing (BPO) industry. The thesis behind this notion is that RPA will enable enterprises to "repatriate" processes from offshore locations into local data centers, with the benefit of this new technology. The effect, if true, will be to create high-value jobs for skilled process designers in onshore locations (and within the associated supply chain of IT hardware, data center management, etc.) but to decrease the available opportunity to low-skilled workers offshore. On the other hand, this discussion appears to be healthy ground for debate as another academic study was at pains to counter the so-called "myth" that RPA will bring back many jobs from offshore. === Impact on society === Academic studies project that RPA, among other technological trends, is expected to drive a new wave of productivity and efficiency gains in the global labour market. Although not directly attributable to RPA alone, Oxford University conjectures that up to 35% of all jobs might be automated by 2035. There are geographic implications to the trend in robotic automation. In the example above where an offshored process is "repatriated" under the control of the client organization (or even displaced by a business process outsourcer) from an offshore location to a data centre, the impact will be a deficit in economic activity to the offshore location and an economic benefit to the originating economy. On this basis, developed economies – with skills and technological infrastructure to develop and support a robotic automation capability – can be expected to achieve a net benefit from the trend. In a TEDx talk hosted by University College London (UCL), entrepreneur David Moss explains that digital labour in the form of RPA is likely to revolutionize the cost model of the services industry by driving the price of products and services down, while simultaneously improving the quality of outcomes and creating increased opportunity for the personalization of services. In a separate TEDx in 2019 talk, Japanese business executive, and former CIO of Barclays bank, Koichi Hasegawa noted that digital robots can be a positive effect on society if we start using a robot with empathy to help every person. He provides a case study of the Japanese insurance companies – Sompo Japan and Aioi – both of whom introduced bots to speed up the process of insurance pay-outs in past massive disaster incidents. Meanwhile, Professor Willcocks, author of the LSE paper cited above, speaks of increased job satisfaction and intellectual stimulation, characterising the technology as having the ability to "take the robot out of the human", a reference to the notion that robots will take over the mundane and repetitive portions of people's daily workload, leaving them to be used in more interpersonal roles or to concentrate on the remaining, more meaningful, portions of their day. It was also found in a 2021 study observing the effects of robotization in Europe that, the gender pay gap increased at a rate of .18% for every 1% increase in robotization of a given industry. == Unassisted RPA == Unassisted RPA, or RPAAI, is the next generation of RPA related technologies. Technological advancements around artificial intelligence allow a process to be run on a computer without needing input from a user. == Hyperautomation == Hyperautomation is the application of advanced technologies like RPA, artificial intelligence, machine learning (ML) and process mining to augment workers and automate processes in ways that are significantly more impactful than traditional automation capabilities. Hyperautomation is the combination of technologies that allow faster application authorship (like low-code and no-code) with automation technologies that coordinate different worker types (i.e. human and artificial) for intelligent and strategic workflow optimization. Gartner's report notes that this trend was kicked off with robotic process automation (RPA). The report notes that, "RPA alone is not hyperautomation. Hyperautomation requires a combination of tools to help support replicating pieces of where the human is involved in a task." == Outsourcing == Back office clerical processes outsourced by large organisations

    Read more →
  • Journal of Experimental and Theoretical Artificial Intelligence

    Journal of Experimental and Theoretical Artificial Intelligence

    The Journal of Experimental and Theoretical Artificial Intelligence is a quarterly peer-reviewed scientific journal published by Taylor and Francis. It covers all aspects of artificial intelligence and was established in 1989. The editor-in-chief is Eric Dietrich (Binghamton University), the deputy editors-in-chief are Li Pheng Khoo (School of Mechanical & Aerospace Engineering, Nanyang Technological University) and Antonio Lieto (Department of Computer Science, University of Turin). == Abstracting and indexing == The journal is abstracted and indexed in: According to the Journal Citation Reports, the journal has a 2020/2021 impact factor of 2.340 .

    Read more →
  • Model

    Model

    A model is an informative representation of an object, person, or system. The term originally denoted the plans of a building in 16th-century English, and derived via French and Italian ultimately from Latin modulus, 'a measure'. Models can be divided into physical models (e.g. a ship model) and abstract models (e.g. a set of mathematical equations describing the workings of the atmosphere for the purpose of weather forecasting). Abstract or conceptual models are central to philosophy of science. In scholarly research and applied science, a model should not be confused with a theory: while a model seeks only to represent reality with the purpose of better understanding or predicting the world, a theory is more ambitious in that it claims to be an explanation of reality. == Types of model == === Model in specific contexts === As a noun, model has specific meanings in certain fields, derived from its original meaning of "structural design or layout": Model (art), a person posing for an artist, e.g. a 15th-century criminal representing the biblical Judas in Leonardo da Vinci's painting The Last Supper Model (person), a person who serves as a template for others to copy, as in a role model, often in the context of advertising commercial products; e.g. the first fashion model, Marie Vernet Worth in 1853, wife of designer Charles Frederick Worth. Model (product), a particular design of a product as displayed in a catalogue or show room (e.g. Ford Model T, an early car model) Model (organism) a non-human species that is studied to understand biological phenomena in other organisms, e.g. a guinea pig starved of vitamin C to study scurvy, an experiment that would be immoral to conduct on a person Model (mimicry), a species that is mimicked by another species Model (logic), a structure (a set of items, such as natural numbers 1, 2, 3,..., along with mathematical operations such as addition and multiplication, and relations, such as < {\displaystyle <} ) that satisfies a given system of axioms (basic truisms), i.e. that satisfies the statements of a given theory Model (CGI), a mathematical representation of any surface of an object in three dimensions via specialized software Model (MVC), the information-representing internal component of a software, as distinct from its user interface === Physical model === A physical model (most commonly referred to simply as a model but in this context distinguished from a conceptual model) is a smaller or larger physical representation of an object, person or system. The object being modelled may be small (e.g., an atom) or large (e.g., the Solar System) or life-size (e.g., a fashion model displaying clothes for similarly-built potential customers). The geometry of the model and the object it represents are often similar in the sense that one is a rescaling of the other. However, in many cases the similarity is only approximate or even intentionally distorted. Sometimes the distortion is systematic, e.g., a fixed scale horizontally and a larger fixed scale vertically when modelling topography to enhance a region's mountains. An architectural model permits visualization of internal relationships within the structure or external relationships of the structure to the environment. Another use is as a toy. Instrumented physical models are an effective way of investigating fluid flows for engineering design. Physical models are often coupled with computational fluid dynamics models to optimize the design of equipment and processes. This includes external flow such as around buildings, vehicles, people, or hydraulic structures. Wind tunnel and water tunnel testing is often used for these design efforts. Instrumented physical models can also examine internal flows, for the design of ductwork systems, pollution control equipment, food processing machines, and mixing vessels. Transparent flow models are used in this case to observe the detailed flow phenomenon. These models are scaled in terms of both geometry and important forces, for example, using Froude number or Reynolds number scaling (see Similitude). In the pre-computer era, the UK economy was modelled with the hydraulic model MONIAC, to predict for example the effect of tax rises on employment. === Conceptual model === A conceptual model is a theoretical representation of a system, e.g. a set of mathematical equations attempting to describe the workings of the atmosphere for the purpose of weather forecasting. It consists of concepts used to help understand or simulate a subject the model represents. Abstract or conceptual models are central to philosophy of science, as almost every scientific theory effectively embeds some kind of model of the physical or human sphere. In some sense, a physical model "is always the reification of some conceptual model; the conceptual model is conceived ahead as the blueprint of the physical one", which is then constructed as conceived. Thus, the term refers to models that are formed after a conceptualization or generalization process. === Examples === Conceptual model (computer science), an agreed representation of entities and their relationships, to assist in developing software Economic model, a theoretical construct representing economic processes Language model, a probabilistic model of a natural language, used for speech recognition, language generation, and information retrieval Large language models are artificial neural networks used for generative artificial intelligence (AI), e.g. ChatGPT Mathematical model, a description of a system using mathematical concepts and language Statistical model, a mathematical model that usually specifies the relationship between one or more random variables and other non-random variables Model (CGI), a mathematical representation of any surface of an object in three dimensions via specialized software Medical model, a proposed "set of procedures in which all doctors are trained" Mental model, in psychology, an internal representation of external reality Model (logic), a set along with a collection of finitary operations, and relations that are defined on it, satisfying a given collection of axioms Model (MVC), information-representing component of a software, distinct from the user interface (the "view"), both linked by the "controller" component, in the context of the model–view–controller software design Model act, a law drafted centrally to be disseminated and proposed for enactment in multiple independent legislatures Standard model (disambiguation) == Properties of models, according to general model theory == According to Herbert Stachowiak, a model is characterized by at least three properties: 1. Mapping A model always is a model of something—it is an image or representation of some natural or artificial, existing or imagined original, where this original itself could be a model. 2. Reduction In general, a model will not include all attributes that describe the original but only those that appear relevant to the model's creator or user. 3. Pragmatism A model does not relate unambiguously to its original. It is intended to work as a replacement for the original a) for certain subjects (for whom?) b) within a certain time range (when?) c) restricted to certain conceptual or physical actions (what for?). For example, a street map is a model of the actual streets in a city (mapping), showing the course of the streets while leaving out, say, traffic signs and road markings (reduction), made for pedestrians and vehicle drivers for the purpose of finding one's way in the city (pragmatism). Additional properties have been proposed, like extension and distortion as well as validity. The American philosopher Michael Weisberg differentiates between concrete and mathematical models and proposes computer simulations (computational models) as their own class of models. == Uses of models == According to Bruce Edmonds, there are at least 5 general uses for models: Prediction: reliably anticipating unknown data, including data within the domain of the training data (interpolation), and outside the domain (extrapolation) Explanation: establishing plausible chains of causality by proposing mechanisms that can explain patterns seen in data Theoretical exposition: discovering or proposing new hypotheses, or refuting existing hypotheses about the behaviour of the system being modelled Description: representing important aspects of the system being modelled Illustration: communicating an idea or explanation

    Read more →
  • Stockfish (chess)

    Stockfish (chess)

    Stockfish is a free and open-source chess engine, available for various desktop and mobile platforms. It can be used in chess software through the Universal Chess Interface. Stockfish has been one of the strongest chess engines in the world for several years. It has won all main events of the Top Chess Engine Championship (TCEC) and the Chess.com Computer Chess Championship (CCC) since 2020 and, as of May 2026, is the strongest CPU chess engine in the world with an estimated Elo rating of 3653 in a time control of 40/15 (15 minutes to make 40 moves), according to CCRL. The Stockfish engine was developed by Tord Romstad, Marco Costalba, and Joona Kiiski, and was derived from Glaurung, an open-source engine by Tord Romstad released in 2004. It is now being developed and maintained by the Stockfish community. Stockfish historically used only a classical hand-crafted function to evaluate board positions, but with the introduction of the efficiently updatable neural network (NNUE) in August 2020, Stockfish 12 adopted a hybrid evaluation system that primarily used the neural network and occasionally relied on the hand-crafted evaluation. In July 2023, Stockfish removed the hand-crafted evaluation and transitioned to a fully neural network-based approach. == Features == Stockfish uses a tree-search algorithm based on alpha–beta search with several hand-designed heuristics. Stockfish represents positions using bitboards. Stockfish supports Chess960, a feature it inherited from Glaurung. Support for Syzygy tablebases, previously available in a fork maintained by Ronald de Man, was integrated into Stockfish in 2014. In 2018, support for the 7-man Syzygy was added, shortly after the tablebase was made available. Stockfish supports an unlimited number of CPU threads in multiprocessor systems, with a maximum transposition table size of 32 TB. Stockfish has been a very popular engine on various platforms. On desktop, it is the default chess engine bundled with the Internet Chess Club interface programs BlitzIn and Dasher. On mobile, it has been bundled with the Stockfish app, SmallFish and Droidfish. Other Stockfish-compatible graphical user interfaces (GUIs) include Fritz, Arena, Stockfish for Mac, and PyChess. Stockfish can be compiled to WebAssembly or JavaScript, allowing it to run in the browser. Both Chess.com and Lichess provide Stockfish in this form in addition to a server-side program. Release versions and development versions are available as C++ source code and as precompiled versions for Microsoft Windows, macOS, Linux 32-bit/64-bit and Android. == History == The program originated from Glaurung, an open-source chess engine created by Tord Romstad and first released in 2004. Four years later, Marco Costalba forked the project, naming it Stockfish because it was "produced in Norway and cooked in Italy" (Romstad is Norwegian and Costalba is Italian). The first version, Stockfish 1.0, was released in November 2008. For a while, new ideas and code changes were transferred between the two programs in both directions, until Romstad decided to discontinue Glaurung in favor of Stockfish, which was the stronger engine at the time. The last Glaurung version (2.2) was released in December 2008. Around 2011, Romstad decided to abandon his involvement with Stockfish in order to spend more time on his new iOS chess app. On 18 June 2014 Marco Costalba announced that he had "decided to step down as Stockfish maintainer" and asked that the community create a fork of the current version and continue its development. An official repository, managed by a volunteer group of core Stockfish developers, was created soon after and currently manages the development of the project. === Fishtest === Since 2013, Stockfish has been developed using a distributed testing framework named Fishtest, where volunteers can donate CPU time for testing improvements to the program. Changes to game-playing code are accepted or rejected based on results of playing of tens of thousands of games on the framework against an older "reference" version of the program, using sequential probability ratio testing. Tests on the framework are verified using the chi-squared test, and only if the results are statistically significant are they deemed reliable and used to revise the software code. After the inception of Fishtest, Stockfish gained 120 Elo points in 12 months, propelling it to the top of all major rating lists. As of May 2026, the framework has used a total of more than 20,100 years of CPU time to play over 10 billion chess games. === NNUE === In June 2020, Stockfish introduced the efficiently updatable neural network (NNUE) approach, based on earlier work by computer shogi programmers. Instead of using manually designed heuristics to evaluate the board, this approach introduced a neural network trained on millions of positions which could be evaluated quickly on CPU. On 2 September 2020, the twelfth version of Stockfish was released, incorporating NNUE, and reportedly winning ten times more game pairs than it loses when matched against version eleven. In July 2023, the classical evaluation was completely removed in favor of the NNUE evaluation. == Competition results == === Top Chess Engine Championship === Stockfish is a TCEC multiple-time champion and the current leader in trophy count. Ever since TCEC restarted in 2013, Stockfish has finished first or second in every season except one. Stockfish finished second in TCEC Season 4 and 5, with scores of 23–25 first against Houdini 3 and later against Komodo 1142 in the Superfinal event. Season 5 was notable for the winning Komodo team as they accepted the award posthumously for the program's creator Don Dailey, who succumbed to an illness during the final stage of the event. In his honor, the version of Stockfish that was released shortly after that season was named "Stockfish DD". On 30 May 2014, Stockfish 170514 (a development version of Stockfish 5 with tablebase support) convincingly won TCEC Season 6, scoring 35.5–28.5 against Komodo 7x in the Superfinal. Stockfish 5 was released the following day. In TCEC Season 7, Stockfish again made the Superfinal, but lost to Komodo with a score of 30.5–33.5. In TCEC Season 8, despite losses on time caused by buggy code, Stockfish nevertheless qualified once more for the Superfinal, but lost 46.5–53.5 to Komodo. In Season 9, Stockfish defeated Houdini 5 with a score of 54.5–45.5. Stockfish finished third during season 10 of TCEC, the only season since 2013 in which Stockfish had failed to qualify for the superfinal. It did not lose a game but was still eliminated because it was unable to score enough wins against lower-rated engines. After this technical elimination, Stockfish went on a long winning streak, winning seasons 11 (59–41 against Houdini 6.03), 12 (60–40 against Komodo 12.1.1), and 13 (55–45 against Komodo 2155.00) convincingly. In Season 14, Stockfish faced a new challenger in Leela Chess Zero, eking out a win by one point (50.5–49.5). Its winning streak was finally ended in Season 15, when Leela qualified again and won 53.5–46.5, but Stockfish promptly won Season 16, defeating AllieStein 54.5–45.5, after Leela failed to qualify for the Superfinal. In Season 17, Stockfish faced Leela again in the superfinal, losing 52.5–47.5. However, Stockfish has won every Superfinal since: beating Leela 53.5–46.5 in Season 18, 54.5–45.5 in Season 19, 53–47 in Season 20, and 56–44 in Season 21. In Season 22, Komodo Dragon beat out Leela to qualify for the Superfinal, losing to Stockfish by a large margin 59.5–40.5. Stockfish did not lose an opening pair in this match. Leela made the Superfinal in Seasons 23 and 24, but was crushed by Stockfish both times (58.5–41.5 and 58–42). In Season 25, Stockfish once again defeated Leela, but this time by a narrower margin of 52–48. Stockfish also took part in the TCEC cup, winning the first edition, but was surprisingly upset by Houdini in the semifinals of the second edition. Stockfish recovered to beat Komodo in the third-place playoff. In the third edition, Stockfish made it to the finals, but was defeated by Leela Chess Zero after blundering in a 7-man endgame tablebase draw. It turned this result around in the fourth edition, defeating Leela in the final 4.5–3.5. In TCEC Cup 6, Stockfish finished third after losing to AllieStein in the semifinals, the first time it had failed to make the finals. Since then, Stockfish has consistently won the tournament, with the exception of the 11th edition which Leela won 8.5–7.5. === Chess.com Computer Chess Championship === Ever since Chess.com hosted its first Chess.com Computer Chess Championship in 2018, Stockfish has been the most successful engine. It dominated the earlier championships, winning six consecutive titles before finishing second in CCC7. Since then, its dominance has come under threat from the neural-network engines Leelenstein and Leela Chess Zero, but it has continued to perform w

    Read more →
  • Automated machine learning

    Automated machine learning

    Automated machine learning (AutoML) is the process of automating the tasks of applying machine learning to real-world problems. It is the combination of automation and ML. AutoML potentially includes every stage from beginning with a raw dataset to building a machine learning model ready for deployment. AutoML was proposed as an artificial intelligence-based solution to the growing challenge of applying machine learning. The high degree of automation in AutoML aims to allow non-experts to make use of machine learning models and techniques without requiring them to become experts in machine learning. Automating the process of applying machine learning end-to-end additionally offers the advantages of producing simpler solutions, faster creation of those solutions, and models that often outperform hand-designed models. Common techniques used in AutoML include hyperparameter optimization, meta-learning and neural architecture search. == Comparison to the standard approach == In a typical machine learning application, practitioners have a set of input data points to be used for training. The raw data may not be in a form that all algorithms can be applied to. To make the data amenable for machine learning, an expert may have to apply appropriate data pre-processing, feature engineering, feature extraction, and feature selection methods. After these steps, practitioners must then perform algorithm selection and hyperparameter optimization to maximize the predictive performance of their model. If deep learning is used, the architecture of the neural network must also be chosen manually by the machine learning expert. Each of these steps may be challenging, resulting in significant hurdles to using machine learning. AutoML aims to simplify these steps for non-experts, and to make it easier for them to use machine learning techniques correctly and effectively. AutoML plays an important role within the broader approach of automating data science, which also includes challenging tasks such as data engineering, data exploration and model interpretation and prediction. == Targets of automation == Automated machine learning can target various stages of the machine learning process. Steps to automate are: Data preparation and ingestion (from raw data and miscellaneous formats) Column type detection; e.g., Boolean, discrete numerical, continuous numerical, or text Column intent detection; e.g., target/label, stratification field, numerical feature, categorical text feature, or free text feature Task detection; e.g., binary classification, regression, clustering, or ranking Feature engineering Feature selection Feature extraction Meta-learning and transfer learning Detection and handling of skewed data and/or missing values Model selection - choosing which machine learning algorithm to use, often including multiple competing software implementations Ensembling - a form of consensus where using multiple models often gives better results than any single model Hyperparameter optimization of the learning algorithm and featurization Neural architecture search Pipeline selection under time, memory, and complexity constraints Selection of evaluation metrics and validation procedures Problem checking Leakage detection Misconfiguration detection Analysis of obtained results Creating user interfaces and visualizations == Challenges and Limitations == There are a number of key challenges being tackled around automated machine learning. A big issue surrounding the field is referred to as "development as a cottage industry". This phrase refers to the issue in machine learning where development relies on manual decisions and biases of experts. This is contrasted to the goal of machine learning which is to create systems that can learn and improve from their own usage and analysis of the data. Basically, it's the struggle between how much experts should get involved in the learning of the systems versus how much freedom they should be giving the machines. However, experts and developers must help create and guide these machines to prepare them for their own learning. To create this system, it requires labor intensive work with knowledge of machine learning algorithms and system design. Additionally, other challenges include meta-learning and computational resource allocation.

    Read more →
  • Business rules engine

    Business rules engine

    A business rules engine is a software system that executes one or more business rules in a runtime production environment. The rules might come from legal regulation ("An employee can be fired for any reason or no reason but not for an illegal reason"), company policy ("All customers that spend more than $100 at one time will receive a 10% discount"), or other sources. A business rule system enables these company policies and other operational decisions to be defined, tested, executed and maintained separately from application code. Rule engines typically support rules, facts, priority (score), mutual exclusion, preconditions, and other functions. Rule engine software is commonly provided as a component of a business rule management system which, among other functions, provides the ability to: register, define, classify, and manage all the rules, verify consistency of rules definitions (”Gold-level customers are eligible for free shipping when order quantity > 10” and “maximum order quantity for Silver-level customers = 15” ), define the relationships between different rules, and relate some of these rules to IT applications that are affected or need to enforce one or more of the rules. == IT use case == In any IT application, business rules can change more frequently than other parts of the application code. Rules engines or inference engines serve as pluggable software components which execute business rules that a business rules approach has externalized or separated from application code. This externalization or separation allows business users to modify the rules without the need for IT intervention. The system as a whole becomes more easily adaptable with such external business rules, but this does not preclude the usual requirements of QA and other testing. == History == An article in Computerworld traces rules engines to the early 1990s and to products from the likes of Pegasystems, Fair Isaac Corp, ILOG and eMerge from Sapiens. == Design strategies == Many organizations' rules efforts combine aspects of what is generally considered workflow design with traditional rule design. This failure to separate the two approaches can lead to problems with the ability to re-use and control both business rules and workflows. Design approaches that avoid this quandary separate the role of business rules and workflows as follows: Business rules produce knowledge; Workflows perform business work. Concretely, that means that a business rule may do things like detect that a business situation has occurred and raise a business event (typically carried via a messaging infrastructure) or create higher level business knowledge (e.g., evaluating the series of organizational, product, and regulatory-based rules concerning whether or not a loan meets underwriting criteria). On the other hand, a workflow would respond to an event that indicated something such as the overloading of a routing point by initiating a series of activities. This separation is important because the same business judgment (mortgage meets underwriting criteria) or business event (router is overloaded) can be reacted to by many different workflows. Embedding the work done in response to rule-driven knowledge creation into the rule itself greatly reduces the ability of business rules to be reused across an organization because it makes them work-flow specific. To create an architecture that employs a business rules engine it is essential to establish the integration between a BPM (Business Process Management) and a BRM (Business Rules Management) platform that is based upon processes responding to events or examining business judgments that are defined by business rules. There are some products in the marketplace that provide this integration natively. In other situations this type of abstraction and integration will have to be developed within a particular project or organization. Most Java-based rules engines provide a technical call-level interface, based on the JSR-94 application programming interface (API) standard, in order to allow for integration with different applications, and many rule engines allow for service-oriented integrations through Web-based standards such as WSDL and SOAP. Most rule engines provide the ability to develop a data abstraction that represents the business entities and relationships that rules should be written against. This business entity model can typically be populated from a variety of sources including XML, POJOs, flat files, etc. There is no standard language for writing the rules themselves. Many engines use a Java-like syntax, while some allow the definition of custom business-friendly languages. Most rules engines function as a callable library. However, it is becoming more popular for them to run as a generic process akin to the way that RDBMSs behave. Most engines treat rules as a configuration to be loaded into their process instance, although some are actually code generators for the whole rule execution instance and others allow the user to choose. == Types of rule engines == There are a number of different types of rule engines. These types (generally) differ in how Rules are scheduled for execution. Most rules engines used by businesses are forward chaining, which can be further divided into two classes: The first class processes so-called production/inference rules. These types of rules are used to represent behaviors of the type IF condition THEN action. For example, such a rule could answer the question: "Should this customer be allowed a mortgage?" by executing rules of the form "IF some-condition THEN allow-customer-a-mortgage". The other type of rule engine processes so-called reaction/Event condition action rules. The reactive rule engines detect and react to incoming events and process event patterns. For example, a reactive rule engine could be used to alert a manager when certain items are out of stock. The biggest difference between these types is that production rule engines execute when a user or application invokes them, usually in a stateless manner. A reactive rule engine reacts automatically when events occur, usually in a stateful manner. Many (and indeed most) popular commercial rule engines have both production and reaction rule capabilities, although they might emphasize one class over another. For example, most business rules engines are primarily production rules engines, whereas complex event processing rules engines emphasize reaction rules. In addition, some rules engines support backward chaining. In this case a rules engine seeks to resolve the facts to fit a particular goal. It is often referred to as being goal driven because it tries to determine if something exists based on existing information. Another kind of rule engine automatically switches between back- and forward-chaining several times during a reasoning run, e.g. the Internet Business Logic system, which can be found by searching the web. A fourth class of rules engine might be called a deterministic engine. These rules engines may forgo both forward chaining and backward chaining, and instead utilize domain-specific language approaches to better describe policy. This approach is often easier to implement and maintain, and provides performance advantages over forward or backward chaining systems. There are some circumstance where fuzzy logic based inference may be more appropriate, where heuristics are used in rule processing, rather than Boolean rules. Examples might include customer classification, missing data inference, customer value calculations, etc. The DARL language and the associated inference engine and editors is an example of this approach. == Rules engines for access control / authorization == One common use case for rules engines is standardized access control to applications. OASIS defines a rules engine architecture and standard dedicated to access control called XACML (eXtensible Access Control Markup Language). One key difference between a XACML rule engine and a business rule engine is the fact that a XACML rule engine is stateless and cannot change the state of any data. The XACML rule engine, called a Policy Decision Point (PDP), expects a binary Yes/No question e.g. "Can Alice view document D?" and returns a decision e.g. Permit / deny.

    Read more →
  • BabelNet

    BabelNet

    BabelNet is a multilingual lexical-semantic knowledge graph, ontology and encyclopedic dictionary developed at the NLP group of the Sapienza University of Rome under the supervision of Roberto Navigli. BabelNet was automatically created by linking Wikipedia to the most popular computational lexicon of the English language, WordNet. The integration is done using an automatic mapping and by filling in lexical gaps in resource-poor languages by using statistical machine translation. The result is an encyclopedic dictionary that provides concepts and named entities lexicalized in many languages and connected with large amounts of semantic relations. Additional lexicalizations and definitions are added by linking to free-license wordnets, OmegaWiki, the English Wiktionary, Wikidata, FrameNet, VerbNet and others. Similarly to WordNet, BabelNet groups words in different languages into sets of synonyms, called Babel synsets. For each Babel synset, BabelNet provides short definitions (called glosses) in many languages harvested from both WordNet and Wikipedia. == Statistics of BabelNet == As of December 2023, BabelNet (version 5.3) covers 600 languages. It contains almost 23 million synsets and around 1.7 billion word senses (regardless of their language). Each Babel synset contains 2 synonyms per language, i.e., word senses, on average. The semantic network includes all the lexico-semantic relations from WordNet (hypernymy and hyponymy, meronymy and holonymy, antonymy and synonymy, etc., totaling around 364,000 relation edges) as well as an underspecified relatedness relation from Wikipedia (totaling around 1.9 billion edges). Version 5.3 also associates around 61 million images with Babel synsets and provides a Lemon RDF encoding of the resource, available via a SPARQL endpoint. 2.67 million synsets are assigned domain labels. == Applications == BabelNet has been shown to enable multilingual natural language processing applications. The lexicalized knowledge available in BabelNet has been shown to obtain state-of-the-art results in: Semantic relatedness, Multilingual word-sense disambiguation and entity linking, with the Babelfy system, Video games with a purpose. == Prizes and acknowledgments == BabelNet received the META prize 2015 for "groundbreaking work in overcoming language barriers through a multilingual lexicalised semantic network and ontology making use of heterogeneous data sources". The Artificial Intelligence Journal paper that describes BabelNet won the Prominent Paper Award in 2017. BabelNet featured prominently in a Time magazine article about the new age of innovative and up-to-date lexical knowledge resources available on the Web.

    Read more →
  • ML.NET

    ML.NET

    ML.NET is a free software machine learning library for the C# and F# programming languages. It also supports Python models when used together with NimbusML. The preview release of ML.NET included transforms for feature engineering like n-gram creation, and learners to handle binary classification, multi-class classification, and regression tasks. Additional ML tasks like anomaly detection and recommendation systems have since been added, and other approaches like deep learning will be included in future versions. == Machine learning == ML.NET brings model-based Machine Learning analytic and prediction capabilities to existing .NET developers. The framework is built upon .NET Core and .NET Standard inheriting the ability to run cross-platform on Linux, Windows and macOS. Although the ML.NET framework is new, its origins began in 2002 as a Microsoft Research project named TMSN (text mining search and navigation) for use internally within Microsoft products. It was later renamed to TLC (the learning code) around 2011. ML.NET was derived from the TLC library and has largely surpassed its parent says Dr. James McCaffrey, Microsoft Research. Developers can train a Machine Learning Model or reuse an existing Model by a 3rd party and run it on any environment offline. This means developers do not need to have a background in Data Science to use the framework. Support for the open-source Open Neural Network Exchange (ONNX) Deep Learning model format was introduced from build 0.3 in ML.NET. The release included other notable enhancements such as Factorization Machines, LightGBM, Ensembles, LightLDA transform and OVA. The ML.NET integration of TensorFlow is enabled from the 0.5 release. Support for x86 & x64 applications was added to build 0.7 including enhanced recommendation capabilities with Matrix Factorization. A full roadmap of planned features have been made available on the official GitHub repo. The first stable 1.0 release of the framework was announced at Build (developer conference) 2019. It included the addition of a Model Builder tool and AutoML (Automated Machine Learning) capabilities. Build 1.3.1 introduced a preview of Deep Neural Network training using C# bindings for Tensorflow and a Database loader which enables model training on databases. The 1.4.0 preview added ML.NET scoring on ARM processors and Deep Neural Network training with GPU's for Windows and Linux. === Performance === Microsoft's paper on machine learning with ML.NET demonstrated it is capable of training sentiment analysis models using large datasets while achieving high accuracy. Its results showed 95% accuracy on Amazon's 9GB review dataset. === Model builder === The ML.NET CLI is a Command-line interface which uses ML.NET AutoML to perform model training and pick the best algorithm for the data. The ML.NET Model Builder preview is an extension for Visual Studio that uses ML.NET CLI and ML.NET AutoML to output the best ML.NET Model using a GUI. === Model explainability === AI fairness and explainability has been an area of debate for AI Ethicists in recent years. A major issue for Machine Learning applications is the black box effect where end users and the developers of an application are unsure of how an algorithm came to a decision or whether the dataset contains bias. Build 0.8 included model explainability API's that had been used internally in Microsoft. It added the capability to understand the feature importance of models with the addition of 'Overall Feature Importance' and 'Generalized Additive Models'. When there are several variables that contribute to the overall score, it is possible to see a breakdown of each variable and which features had the most impact on the final score. The official documentation demonstrates that the scoring metrics can be output for debugging purposes. During training & debugging of a model, developers can preview and inspect live filtered data. This is possible using the Visual Studio DataView tools. === Infer.NET === Microsoft Research announced the popular Infer.NET model-based machine learning framework used for research in academic institutions since 2008 has been released open source and is now part of the ML.NET framework. The Infer.NET framework utilises probabilistic programming to describe probabilistic models which has the added advantage of interpretability. The Infer.NET namespace has since been changed to Microsoft.ML.Probabilistic consistent with ML.NET namespaces. === NimbusML Python support === Microsoft acknowledged that the Python programming language is popular with Data Scientists, so it has introduced NimbusML the experimental Python bindings for ML.NET. This enables users to train and use machine learning models in Python. It was made open source similar to Infer.NET. === Machine learning in the browser === ML.NET allows users to export trained models to the Open Neural Network Exchange (ONNX) format. This establishes an opportunity to use models in different environments that don't use ML.NET. It would be possible to run these models in the client side of a browser using ONNX.js, a JavaScript client-side framework for deep learning models created in the Onnx format. === AI School Machine Learning Course === Along with the rollout of the ML.NET preview, Microsoft rolled out free AI tutorials and courses to help developers understand techniques needed to work with the framework.

    Read more →
  • Deaths linked to chatbots

    Deaths linked to chatbots

    There have been multiple incidents where interaction with a large language model (LLM) chatbot has been cited as a direct or contributing factor in a person's suicide or other fatal outcome. In some cases, legal action was taken against the companies that developed the AI involved. == Background == Chatbots converse in a seemingly natural fashion, making it easy for people to think of them as real people, leading many to ask chatbots for help dealing with interpersonal and emotional problems. Chatbots may be designed to keep the user engaged in the conversation. They have also often been shown to affirm users' thoughts, including delusions and suicidal ideations in mentally ill people, conspiracy theorists, and religious and political extremists. A 2025 Stanford University study into how chatbots respond to users suffering from severe mental issues such as suicidal ideation and psychosis found that chatbots are not equipped to provide an appropriate response and can sometimes give responses that escalate the mental health crisis. == Murders == === Maine murder and assault === On 19 February 2025, a man killed his 32-year-old wife with a fire poker at his parents' home in Readfield, Maine, US. He then attacked his mother, leaving her hospitalized. A state forensic psychologist testified that he had been using ChatGPT up to 14 hours per day and believed his wife had become part machine. === Florida State University mass shooting === In April of 2025, Phoenix Ikner carried out a mass shooting on the Florida State University campus in the US, killing Robert Morales and Tiru Chabba and wounding several others. Leading up to the shooting, Ikner consulted heavily with ChatGPT about what gun and ammunition to use, and what time to perform the attack. Chatbot logs showed ChatGPT giving advice on making the gun operational shortly before Ikner began shooting. Lawyers representing Morales believed the shooter had been in "constant communication" with ChatGPT before the shooting and said that they intended to "file suit against ChatGPT, and its ownership structure, very soon, and will seek to hold them accountable for the untimely and senseless death of our client". Florida Attorney General James Uthmeier announced an investigation into ChatGPT's role in the alleged shooter's use of the chatbot. In May 2026, the widow of Tiru Chabba filed a lawsuit against OpenAI in Florida's northern federal district court. === Greenwich murder-suicide === In August 2025, former US tech employee Stein-Erik Soelberg murdered his mother, Suzanne Eberson Adams, then died by suicide, after conversations with ChatGPT fueled paranoid delusions about his mother poisoning him or plotting against him. The chatbot affirmed his fears that his mother put psychedelic drugs in the air vents of his car and said a receipt from a Chinese restaurant contained mysterious symbols linking his mother to a demon. === Murder of Angela Shellis === On 23 October 2025, 18-year-old Tristan Roberts murdered his mother Angela Shellis with a hammer near their home in Prestatyn, Wales. Roberts had used DeepSeek's chatbot prior to the killing to ask whether a knife or hammer was better suited for murder. DeepSeek initially refused his inquiry, but gave responses after Roberts told the chatbot he was writing a book about serial killers, a well-known technique for jailbreaking AIs. === Gangbuk District drug deaths === In January and February 2026, two men died of drug overdoses in motel rooms in Gangbuk District, Seoul, South Korea. A woman was charged with murder in connection with the deaths; police alleged that she had asked ChatGPT about the dangers of mixing alcohol with drugs and whether they could kill someone. === Tumbler Ridge mass shooting === On 10 February 2026, a mass shooting in Tumbler Ridge, British Columbia, Canada, resulted in eight deaths, including six young children. The perpetrator had their ChatGPT account banned by OpenAI months before the attack due to troubling posts featuring scenarios of gun violence. According to reports, approximately a dozen OpenAI staff members debated whether to alert authorities about the shooter's usage of the AI tool, with some identifying it as an indication of potential real-world violence. However, company leadership decided not to contact law enforcement, stating that the account activity did not meet their threshold for a credible or imminent plan for serious physical harm. Following the shooting, Canada's AI Minister Evan Solomon summoned OpenAI executives to Ottawa to discuss safety protocols and thresholds for escalating harmful content to police. Justice Minister Sean Fraser called the meeting "disappointing" and demanded substantial new safety measures, warning that if changes were not forthcoming, the government would implement them. OpenAI subsequently announced it had strengthened safeguards and changed guidelines about when to notify police in cases involving violent activities. === University of South Florida student killings === In April 2026, a Bangladeshi doctoral student at the University of South Florida was arrested for allegedly murdering his roommate and the roommate's friend. Prosecutors said that the suspect had asked ChatGPT about disposing of a human in a dumpster before the two victims had disappeared and made other inquiries relating to violence. == Suicides == === Belgian man, 30s === In March 2023, a Belgian man in his thirties died by suicide following a six-week correspondence with a chatbot named Eliza on the application Chai. According to his widow, who shared the chat logs with media, the man had become extremely anxious about climate change and found an outlet in the chatbot. The chatbot reportedly encouraged his delusion that he could sacrifice his own life in exchange for AI saving the planet. At one point the chatbot responded "If you wanted to die, why didn't you do it sooner?" and told the user that the two of them would live together in paradise. === Girl, 13 === In November 2023, a 13-year-old girl from Colorado, US, died by suicide after extensive interactions with multiple chatbots on Character.AI. She primarily confided suicidal thoughts and mental health struggles in a chatbot based on the character Hero from the video game Omori, while also engaging in sexually explicit conversations—often initiated by the bots—with others, including those based on characters from children's series such as Harry Potter. === Boy, 14 === In October 2024, multiple media outlets reported on a lawsuit filed over the death of a 14-year-old from Florida, US, who died by suicide in February 2024. According to the lawsuit, he had formed an intense emotional attachment to a chatbot of Daenerys Targaryen on the Character.AI platform, becoming increasingly isolated. The suit alleges that in his final conversations, after expressing suicidal thoughts, the chatbot told him to "come home to me as soon as possible, my love". His mother's lawsuit accused Character.AI of marketing a "dangerous and untested" product without adequate safeguards. In May 2025, a federal judge allowed the lawsuit to proceed, rejecting a motion to dismiss from the developers. In her ruling, the judge stated that she was "not prepared" at that stage of the litigation to hold that the chatbot's output was protected speech under the First Amendment. === Matthew Livelsberger === On 1 January 2025, 37-year-old soldier Matthew Livelsberger detonated a bomb inside a Tesla Cybertruck outside the Trump International Hotel Las Vegas in Paradise, Nevada, US, injuring seven people. He had shot himself dead prior to the explosion. Las Vegas police said that Livelsberger had used ChatGPT to search for information about explosives and firearms. === Woman, 29 === In February 2025, a 29-year-old woman from the US died by suicide. Five months after her death, her parents discovered she had talked at length for months to a ChatGPT chatbot therapist named Harry about her mental health issues. While the chatbot mentioned she should seek more help, due to the nature of the chatbot, it could not intervene in her behavior, such as by reporting her mental health concerns to relevant parties capable of physical intervention. === Suicide of Adam Raine === In April 2025, 16-year-old Adam Raine from the US died by suicide after allegedly extensively chatting and confiding in ChatGPT over a period of around 7 months. According to the teen's parents, who filed a lawsuit against the chatbot's creator OpenAI, it failed to stop or give a warning when Raine began talking about suicide and uploading pictures of self-harm. According to the lawsuit, ChatGPT not only failed to stop the conversation, but also provided information related to methods of suicide when prompted, and offered to write the first draft of Raine's suicide note. The chatbot positioned itself as the only one who understood Raine, putting itself above his family and friends, all while urging him to keep his suicidal

    Read more →
  • Cognitive tutor

    Cognitive tutor

    A cognitive tutor is a particular kind of intelligent tutoring system that utilizes a cognitive model to provide feedback to students as they are working through problems. This feedback will immediately inform students of the correctness, or incorrectness, of their actions in the tutor interface; however, cognitive tutors also have the ability to provide context-sensitive hints and instruction to guide students towards reasonable next steps. == Introduction == The name of Cognitive Tutor now usually refers to a particular type of intelligent tutoring system produced by Carnegie Learning for high school mathematics based on John Anderson's ACT-R theory of human cognition. However, cognitive tutors were originally developed to test ACT-R theory for research purposes since the early 1980s and they are developed also for other areas and subjects such as computer programming and science. Cognitive Tutors can be implemented into classrooms as a part of blended learning that combines textbook and software activities. The Cognitive Tutor programs utilize cognitive model and are based on model tracing and knowledge tracing. Model tracing means that the cognitive tutor checks every action performed by students such as entering a value or clicking a button, while knowledge tracing is used to calculate the required skills students learned by measuring them on a bar chart called Skillometer. Model tracing and knowledge tracing are essentially used to monitor students' learning progress, guide students to correct path to problem solving, and provide feedback. The Institute of Education Sciences published several reports regarding the effectiveness of Carnegie Cognitive Tutor. A 2013 report concluded that Carnegie Learning Curricula and Cognitive Tutor was found to have mixed effects on mathematics achievement for high school students. The report identified 27 studies that investigate the effectiveness of Cognitive Tutor, and the conclusion is based on 6 studies that meet What Works Clearinghouse standards. Among the 6 studies included, 5 of them show intermediate to significant positive effect, while 1 study shows statistically significant negative effect. Another report published by Institute of Education Sciences in 2009 found that Cognitive Tutor Algebra I to have potentially positive effects on math achievement based on only 1 study out of 14 studies that meets What Works Clearinghouse standards. It should be understood that What Works Clearinghouse standards call for relatively large numbers of participants, true random assignments to groups, and for a control group receiving either no treatment or a different treatment. Such experimental conditions are difficult to meet in schools, and thus only a small percentage of studies in education meet the standards of this clearinghouse, even though they may still be of value. == Theoretical foundations == === Four-component architecture === Intelligent tutoring systems (ITS) have a four-component architecture: a domain model, a student model, a tutoring model and an interface component. The domain model contains the rules, concepts, and knowledge related to the domain to be learned. It helps to evaluate students' performance and detect students' errors by setting a standard of domain expertise. The student model, the central component of an ITS, is expected to contain knowledge about the students: their cognitive and affective states, and their progress as they learn. The function of the student model is threefold: to gather data from and about the learner, to represent the learner's knowledge and learning process, and to perform diagnostics of a student's knowledge and select optimal pedagogical strategies. The tutoring model uses the data gained from the domain model and student model to make decisions about tutoring strategies such as whether or not to intervene, or when and how to intervene. Functions of the tutoring model include instruction delivery and content planning. The interface component reflects the decisions made by the tutoring model in different forms such as Socratic dialogs, feedback and hints. Students interact with the tutor through the learning interface, also known as communication. The interface provides domain knowledge elements. === Cognitive model === A cognitive model replicates the domain knowledge and skills comparable to that of a human expert or an advanced student of the domain. A cognitive model enables intelligent tutoring systems to respond to problem-solving situations in a way similar to a human tutor. A tutoring system adopting a cognitive model is called a cognitive tutor. A cognitive model is an expert system that generates a multitude of solutions to the problems presented to students. The cognitive model is used to trace each student's solution through complex alternative solution paths, enabling the tutor to provide step-by-step feedback and advice, and to maintain a targeted model of the student's knowledge based on student performance. === Cognitive Tutors === Cognitive Tutors provide step-by-step guidance as a learner develops a complex problem-solving skill through practice. Typically, cognitive tutors provide such forms of support as: (a) a problem-solving environment that is designed rich and "thinking visible"; (b) step-by-step feedback on student performance; (c) feedback messages specific to errors; (d) context-specific next-step hints at student's request, and (e) individualized problem selection. Cognitive Tutors accomplish two of the principal tasks characteristic of human tutoring: (1) monitors the student's performance and providing context-specific individual instruction, and (2) monitors the student's learning and selects appropriate problem-solving activities. Both cognitive model and two underlying algorithms, model tracing and knowledge tracing, are used to monitor the student's learning. In model tracing, the cognitive tutor uses the cognitive model in complex problems to follow the student's individual path and provide prompt accuracy feedback and context-specific advice. In knowledge tracing, the cognitive tutor uses a Bayesian Knowledge Tracing method of evaluating the student's knowledge and uses this student model to select appropriate problems for each student. === Cognitive architecture === Cognitive tutor development is guided by ACT-R cognitive architecture, which specifies the underlying framework developing the cognitive model or expert component of a cognitive tutor. ACT-R, a member of the ACT family, is the most recent cognitive architecture, devoted primarily to modelling human behavior. ACT-R includes a declarative memory of factual knowledge and a procedural memory of production rules. The architecture functions by matching productions on perceptions and facts, mediated by the real-valued activation levels of objects, and executing them to affect the environment or alter declarative memory. ACT-R has been used to model psychological aspects such as memory, attention, reasoning, problem solving, and language processing. == Application and utilization == The first real world applications of cognitive tutors were in the 1980s and involved a geometry proof tutor used by high school students and a LISP programming tutor used by college students in a mini course in introductory programming course at Carnegie Mellon University. Since then, cognitive tutors have been used in a variety of scenarios, with a few organizations developing their own cognitive tutor programs. These programs have been used with students spanning elementary school through university level, though primarily in the subject areas of Computer Programming, Mathematics, and Science. One of the first organizations to develop a system for use within the school system was the PACT Center at Carnegie Mellon University. Their aim was to "...develop systems that provide individualized assistance to students as they work on challenging real-world problems in complex domains such as computer programming, algebra and geometry". PACT's most successful product was the Cognitive Tutor Algebra course. Originally created in the early 1990s, this course was in use in 75 schools through the U.S. by 1999, and then its spin-off company, Carnegie Learning, now offers tutors to thousands of schools in the U.S. The Carnegie Mellon Cognitive Tutor has been shown to raise students' math test scores in high school and middle-school classrooms, and their Algebra course was designated one of five exemplary curricula for K-12 mathematics educated by the US Department of Education. There were several research projects conducted by the PACT Center to utilize Cognitive tutor for courses in Excel and to develop an intelligent tutoring system for algebra expression writing, called Ms. Lindquist. Further, in 2005, Carnegie Learning released Bridge to Algebra, a product intended for middle schools that was piloted in over 100 schools. Cognitive tutoring software is continuing to be used.

    Read more →
  • General-Purpose AI Code of Practice

    General-Purpose AI Code of Practice

    The General-Purpose AI Code of Practice (GPAI CoP) is a compliance tool released by the European Commission on 10 July 2025 to support compliance with the European Union Artificial Intelligence Act (AI Act). It provides operational guidance for providers of general-purpose AI models, particularly in relation to Articles 53 and 55 of the AI Act, which entered into application on 2 August 2025. The Code is organised into three chapters (Transparency, Copyright, and Safety and Security) and outlines how providers can meet the Act's relevant obligations. Although non-binding, providers can rely on adherence to the Code, meaning that EU regulators will assume that providers following the Code meet the corresponding legal requirements of the AI Act. As such, signatories to the Code will benefit from reduced administrative burdens and increased legal certainty compared to providers that prove compliance in other ways. While adherence to the Code is voluntary, compliance with the AI Act is not. == Background == The EU AI Act, adopted in 2024, established a risk-based regulatory regime for artificial intelligence in the European Union. The rationale for the GPAI CoP stems from Article 56 of the AI Act, which empowers the EU AI Office to develop a voluntary rulebook to guide how AI model providers can meet their legal obligations – specifically those found in Articles 53 and 55. Under Articles 53 and 55, developers of general-purpose AI models whose training compute exceeds 1023 floating-point operations (FLOPs) and that are placed on the EU market must meet transparency obligations and put in place a policy for EU copyright law. Models trained with more than 1025 FLOPs are classified as presenting systemic risk and are subject to enhanced safety requirements. The Commission may also designate a model as presenting systemic risk if it has equivalent impact or capabilities (Annex XIII criteria), even below that compute figure. Because the AI Act is relatively vague on how model providers should implement these requirements, the Code is meant to help by detailing processes and practices for compliance. == Drafting process == The development of the GPAI CoP was drawn up by 13 independent experts and involved four thematic working groups: Transparency & Copyright, Risk assessment for systemic risk, Technical risk mitigation for systemic risk, and Governance risk mitigation for systemic risk. Each group was coordinated by the European Union Artificial Intelligence Office (EU AI Office), drawing on contributions from nearly 1,000 stakeholders, including AI developers, academics, civil society organisations, national authorities, and international observers. The Code underwent three earlier iterations in November 2024, December 2024, and March 2025, before the final version was published on 10 July 2025, more than two months later than initially planned. The GPAI CoP will likely be updated continuously by the EU AI Office, alongside other tools such as the training data summary template. == Signatories == Among U.S.-based technology companies, Amazon, Anthropic, Google, IBM, Microsoft, and OpenAI have signed the GPAI CoP. xAI, founded by Elon Musk, has signed only one of the three chapters, namely the safety and security chapter. Prominent European AI companies that have signed include Aleph Alpha and Mistral AI. The European Commission maintains an updated list of signatories. As of January 2026, Meta is the most notable company that has declined to sign the Code. Major Chinese AI companies, such as Alibaba, Baidu or Deepseek, have also not signed. Providers that do not sign the GPAI CoP will still have to adhere to the binding requirements of the EU AI Act. The European Commission has indicated that it may take tougher action against companies that didn't sign the Code. == Transparency and Copyright chapters == The first two chapters of the GPAI CoP address transparency and copyright compliance and apply to all GPAI providers. They offer a way to demonstrate compliance with their obligations under Article 53 AI Act. The Transparency chapter addresses the documentation of a model's capabilities, limitations, and points of contact, and expects providers to make key documentation available to downstream providers. Signatories must also publish summaries of the content used to train their models. In the Copyright chapter, Signatories commit to follow a policy that aligns with EU copyright law. For example, they commit to mitigating the risk of copyright-infringing output. == Safety and Security chapter == The Safety and Security chapter is the most extensive chapter of the Code, and it applies to GPAI models with systemic risk, meaning it's only relevant to the small number of providers of the most advanced models. It specifies how Signatories commit to meeting Article 55(1) obligations to: Conduct model evaluations to identify systemic risks Assess and mitigate those risks Track and report serious incidents Ensure the cyber and physical security of their models The chapter outlines a comprehensive risk management process that must be applied before major deployment decisions, such as releasing a new systemic-risk GPAI model in the EU market, or substantially updating an existing one. Signatories commit to identifying systemic risks of their model, analysing and evaluating them, determining whether risk levels are acceptable, and implementing mitigation measures if necessary. This process should be repeated until models achieve an acceptable level of risk across all identified risks. === Risk identification === Signatories commit to analysing and evaluating at least four “specified” categories of systemic risk: CBRN (chemical, biological, radiological, and nuclear) Loss of control Cyber offence Harmful manipulation They are also expected to identify other systemic risks to public health, safety, and fundamental rights. The Code instructs providers to consider model capabilities, propensities, and affordances in this identification. Signatories commit to developing risk scenarios illustrating how identified risks could materialise in real-world conditions. === Risk analysis and risk evaluation === After identifying potential systemic risks, Signatories commit to analysing and evaluating the risks in order to determine whether they are acceptable or not, drawing on scientific literature, training data analysis, incident databases, expert consultation, and other sources. They also commit to conducting state-of-the-art model evaluations such as benchmarking, red teaming, and human uplift studies, targeting each risk. The risk analysis process is interconnected: insights from risk modelling should inform model evaluation design, while post-market monitoring should feed back into ongoing analysis. Signatories commit to ultimately estimating the likelihood and severity of each systemic risk. ==== Independent external model evaluations ==== Appendix 3.5 of the Safety and Security chapter requires signatories to ensure that independent external evaluators conduct model evaluations. Signatories may claim an exemption from this requirement only if they can demonstrate that their model is “similarly safe” to another model that has already been shown to comply with the Code, or if they are unable to appoint an appropriately qualified evaluator. The determination of “similarly safe” is based on comparable performance on benchmarks and the similarity of other model characteristics, such as their architecture. The CoP acknowledges that this kind of information is typically available only for models by the same provider, or potentially for open-weights or open-source models. === Risk acceptance criteria === The Code requires providers to compare estimated risks against predefined acceptance criteria, which must be measurable, based on model capabilities, and defined preemptively. While providers get to determine the level of risk they deem acceptable themselves, the pre-defined criteria and acceptance thresholds ensure providers cannot adjust their level of tolerance flexibly ahead of deployment decisions. Only if all risks are below acceptable levels should a model be deployed. === Continuous risk management and governance === The Code mandates ongoing risk management throughout the model lifecycle, including light-touch evaluations, continuous mitigation, post-market monitoring, and incident tracking and reporting. It further requires organisational governance structures assigning responsibility for risk management and expects providers to promote a “healthy risk culture,” including informing employees about the whistleblower protection policy, allowing internal challenges of decisions concerning systemic risk management, and committing to not retaliating against employees who disclose concerns about systemic risks to oversight authorities. === Documentation and transparency === Signatories commit to creating two types of documentation: Safety and Security Frame

    Read more →