AI Assistant Gemini

AI Assistant Gemini — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Double descent

Double descent in statistics and machine learning is the phenomenon where a model's error rate on the test set initially decreases with the number of parameters, then peaks, then decreases again. This phenomenon has been considered surprising, as it contradicts assumptions about overfitting in classical machine learning. The increase usually occurs near the interpolation threshold, where the number of parameters is the same as the number of training data points (the model is just large enough to fit the training data). Or, more precisely, it is the maximum number of samples on which the model/training procedure achieves approximately on average 0 training error. == History == Early observations of what would later be called double descent in specific models date back to 1989. The term "double descent" was coined by Belkin et. al. in 2019, when the phenomenon gained popularity as a broader concept exhibited by many models. The latter development was prompted by a perceived contradiction between the conventional wisdom that too many parameters in the model result in a significant overfitting error (an extrapolation of the bias–variance tradeoff), and the empirical observations in the 2010s that some modern machine learning techniques tend to perform better with larger models. == Theoretical models == Double descent occurs in linear regression with isotropic Gaussian covariates and isotropic Gaussian noise. A model of double descent at the thermodynamic limit has been analyzed using the replica trick, and the result has been confirmed numerically. A number of works have suggested that double descent can be explained using the concept of effective dimension: While a network may have a large number of parameters, in practice only a subset of those parameters are relevant for generalization performance, as measured by the local Hessian curvature. This explanation is formalized through PAC-Bayes compression-based generalization bounds, which show that less complex models are expected to generalize better under a Solomonoff prior.
Read more →
Novell File Reporter

Novell File Reporter (NFR) is software that allows network administrators to identify files stored on the network and generates reports regarding the size of individual files, file type, when files were last accessed, and where duplicates exist. Additionally, the File Reporter tracks storage volume capacity and usage. It is a component of the Novell File Management Suite. == How it works == Novell File Reporter examines and reports on terabytes of data via a central reporting engine (NFR Engine) and distributed agents (NFR Agents). The NFR Engine schedules the scans of file instances conducted by NFR Agents, processes and compiles the scans for reporting purposes, and provides report information to the user interface. In addition to the standard reports it can generate, the NFR Engine can also produce "trigger reports" in response to specific events (a server volume crossing a capacity threshold, for example). Accordingly, the NFR Engine monitors the data gathered by the NFR Agents in order to identify these "triggers." The NFR Engine when working in either eDirectory or Active Directory connects to the directory via a Directory Services Interface (DSI) and thus can monitor and check file permissions.
Read more →
Technical data management system

A technical data management system (TDMS) is a document management system (DMS) pertaining to the management of technical and engineering drawings and documents. Often the data are contained in 'records' of various forms, such as on paper, microfilms or digital media. Hence technical data management is also concerned with record management involving technical data. Technical document management systems are used within large organisations with large scale projects involving engineering. For example, a TDMS can be used for integrated steel plants (ISP), automobile factories, aero-space facilities, infrastructure companies, city corporations, research organisations, etc. In such organisations, technical archives or technical documentation centres are created as central facilities for effective management of technical data and records. TDMS functions are similar to that of conventional archive functions in concepts, except that the archived materials in this case are essentially engineering drawings, survey maps, technical specifications, plant and equipment data sheets, feasibility reports, project reports, operation and maintenance manuals, standards, etc. Document registration, indexing, repository management, reprography, etc. are parts of TDMS. Various kinds of sophisticated technologies such as document scanners, microfilming and digitization camera units, wide format printers, digital plotters, software, etc. are available, making TDMS functions an easier process than previous times. == Constituents of a technical data management system == Technical data refers to both scientific and technical information recorded and presented in any form or manner (excluding financial and management information). A Technical Data Management System is created within an organisation for archiving and sharing information such as technical specifications, datasheets and drawings. Similar to other types of data management system, a Technical Data Management System consists of the 4 crucial constituents mentioned below. === Data planning === Data plans (long-term or short-term) are constructed as the first essential step of a proper and complete TDMS. It is created to ultimately help with the 3 other constituents, data acquisition, data management and data sharing. A proper data plan should not exceed 2 pages and should address the following basics: Types of data (samples, experiment results, reports, drawings, etc.) and metadata (data that summarizes and describes other data. In this case, it refers to details such as sample sizes, experiment conditions and procedures, dates of reports, explanations of drawings, etc.) Means of researches and collections of data (field works, experiments in production lines, etc.) Costs of researches Policies for access, sharing (re-use within the organisation and re-distribution to the public) Proposals for archiving data and maintaining access to it === Data acquisition === Raw data is collected from primary sites of the organisations through the use of modern technologies. Please reference the table below for examples. The data collected is then transferred to technical data centres for data management. === Data management === After data acquisition, data is sorted out, whilst useful data is archived, unwanted data is disposed. When managing and archiving data, the features below of the data are considered. Names, labels, values and descriptions for variables and records. (In the case of TDMS, one example is names of equipments on an equipment datasheet) Derived data from the original data, with code, algorithm or command file used to create them. (In the case of TDMS, one example is an expectation report derived from the analysis of an equipment datasheet) Metadata associates with the data being archived === Data sharing === Archived and managed data are accessible to rightful entities. A proper and complete TDMS should share data to a suitable extent, under suitable security, in order to achieve optimal usage of data within the organisation. It aims for easy access when reused by other researchers and hence it enhances other research processes. Data is often referred in other tests and technical specifications, where new analysis is generated, managed and archived again. As a result, data is flowing within the organisation under effective management through the use of TDMS. == Advantages and disadvantages of usage of technical data management systems == There are strengths and weakness when using technical data management systems (TDMS) to archive data. Some of the advantages and disadvantages are listed below. === Advantages === ==== 1. Faster and easier data management ==== Since TDMS is integrated into the organisation's systems, whenever workers develop data files (SolidWorks, AutoCAD, Microsoft Word, etc.), they can also archive and manage data, linking what they need to their current work, at the same time they can also update the archives with useful data. This speeds up working processes and makes them more efficient. ==== 2. Increased security ==== All data files are centralized, hence internal and external data leakages are less likely to happen, and the data flow is more closely monitored. As a result, data in the organisation is more secured. ==== 3. Increased collaboration within the organisation ==== Since the data files are centralized and the data flow within the organisation increases, researchers and workers within the organisation are able to work on joint projects. More complex tasks can be performed for higher yields. ==== 4. Compatible to various formats of data ==== TDMS is compatible to many formats of data, from basic data like Microsoft Words to complex data like voice data. This enhances the quality of the management of data archived. === Disadvantages === ==== 1. Higher financial costs ==== Implementing TDMS into the organisation's systems involves monetary costs. Maintenance costs certain amount of human resources and money as well. These resources involve opportunity costs as they can be utilized in other aspects. ==== 2. Lower stability ==== Since TDMS manages and centralizes all the data the organisation processes, it links the working processes within the whole organisation together. It also increases the vulnerability of the organisation data network. If TDMS is not stable enough or when it is exposed to hacker and virus attacks, the organisation's data flow might shut down completely, affecting the work in an organisation-wide scale and leading to a lower stability as results. == Comparison between traditional data management approaches and technical data management systems == Test engineers and researchers are facing great challenges in turning complex test results and simulation data into usable information for higher yields of firms. These challenges are listed below. Increase in complication of designs Reduced in time and budgets available Higher quality is demanded === Traditional data management approaches === Many organisations are still applying the conventional file management systems, due to the difficulty in building a proper and complete archives for data management. The first approach is the simple file-folder system. This costs the problem of ineffectiveness as workers and researchers have to manually go through numerous layers of systems and files for the target data. Moreover, the target data may contain files with different formats and these files may not be stored in the same machine. These files are also easily lost if renamed or moved to another location. The second approach is conventional databases such as Oracle. These databases are capable of enabling easy search and access of data. However, a great drawback is that huge effort for preparing and modeling the data is required. For large-scale projects, huge monetary costs are induced, and extra IT human resources must be employed for constant handling, expanding and maintaining the inflexible system, which is custom for specific tasks, instead of all tasks. In the long-term, it is not cost-effective. === Technical data management systems (TDMS) === TDMS is developed based on 3 principles, flexible and organized file storage, self-scaling hybrid data index, and an interactive post-processing environment. The system in practical, mainly consists of 3 components, data files with essential and relevant Metadata, data finders for organizing and managing data regardless of files formats, and, a software of searching, analyzing and reporting. With metadata attached to original data files, the data finder can identify different related data files during searches, even if they are in different file formats. TDMS hence allows researchers to search for data like browsing the Internet. Last but not least, it can adapt to changes and update itself according to the changes, unlike databases. == Comparison between strong information systems and weak information systems == Complex organizations may need large amounts
Read more →
Bibliographic database

A bibliographic database is a database of bibliographic records. This is an organised online collection of references to published written works like journal and newspaper articles, conference proceedings, reports, government and legal publications, patents and books. In contrast to library catalogue entries, a majority of the records in bibliographic databases describe articles and conference papers rather than complete monographs, and they generally contain very rich subject descriptions in the form of keywords, subject classification terms, or abstracts. A bibliographic database may cover a wide range of topics or one academic field like computer science. A significant number of bibliographic databases are marketed under a trade name by licensing agreement from vendors, or directly from their makers: the indexing and abstracting services. Many bibliographic databases have evolved into digital libraries, providing the full text of the organised contents:for instance CORE also organises and mirrors scholarly articles and OurResearch develops a search engine for open access content in Unpaywall. Others merge with non-bibliographic and scholarly databases to create more complete disciplinary search engine systems, such as Chemical Abstracts or Entrez. == History == Prior to the mid-20th century, individuals searching for published literature had to rely on printed bibliographic indexes, generated manually from index cards. During the early 1960s computers were used to digitize text for the first time; the purpose was to reduce the cost and time required to publish two American abstracting journals, the Index Medicus of the National Library of Medicine and the Scientific and Technical Aerospace Reports of the National Aeronautics and Space Administration (NASA). By the late 1960s, such bodies of digitized alphanumeric information, known as bibliographic and numeric databases, constituted a new type of information resource. Online interactive retrieval became commercially viable in the early 1970s over private telecommunications networks. The first services offered a few databases of indexes and abstracts of scholarly literature. These databases contained bibliographic descriptions of journal articles that were searchable by keywords in author and title, and sometimes by journal name or subject heading. The user interfaces were crude, the access was expensive, and searching was done by librarians on behalf of "end users".
Read more →
Cross-language information retrieval

Cross-language information retrieval (CLIR) is a subfield of information retrieval dealing with retrieving information written in a language different from the language of the user's query. The term "cross-language information retrieval" has many synonyms, of which the following are perhaps the most frequent: cross-lingual information retrieval, translingual information retrieval, multilingual information retrieval. The term "multilingual information retrieval" refers more generally both to technology for retrieval of multilingual collections and to technology which has been moved to handle material in one language to another. The term Multilingual Information Retrieval (MLIR) involves the study of systems that accept queries for information in various languages and return objects (text, and other media) of various languages, translated into the user's language. Cross-language information retrieval refers more specifically to the use case where users formulate their information need in one language and the system retrieves relevant documents in another. To do so, most CLIR systems use various translation techniques. CLIR techniques can be classified into different categories based on different translation resources: Dictionary-based CLIR techniques Parallel corpora based CLIR techniques Comparable corpora based CLIR techniques Machine translator based CLIR techniques CLIR systems have improved so much that the most accurate multi-lingual and cross-lingual adhoc information retrieval systems today are nearly as effective as monolingual systems. Other related information access tasks, such as media monitoring, information filtering and routing, sentiment analysis, and information extraction require more sophisticated models and typically more processing and analysis of the information items of interest. Much of that processing needs to be aware of the specifics of the target languages it is deployed in. Mostly, the various mechanisms of variation in human language pose coverage challenges for information retrieval systems: texts in a collection may treat a topic of interest but use terms or expressions which do not match the expression of information need given by the user. This can be true even in a mono-lingual case, but this is especially true in cross-lingual information retrieval, where users may know the target language only to some extent. The benefits of CLIR technology for users with poor to moderate competence in the target language has been found to be greater than for those who are fluent. Specific technologies in place for CLIR services include morphological analysis to handle inflection, decompounding or compound splitting to handle compound terms, and translations mechanisms to translate a query from one language to another. The first workshop on CLIR was held in Zürich during the SIGIR-96 conference. Workshops have been held yearly since 2000 at the meetings of the Cross Language Evaluation Forum (CLEF). Researchers also convene at the annual Text Retrieval Conference (TREC) to discuss their findings regarding different systems and methods of information retrieval, and the conference has served as a point of reference for the CLIR subfield. Early CLIR experiments were conducted at TREC-6, held at the National Institute of Standards and Technology (NIST) on November 19–21, 1997. Google Search had a cross-language search feature that was removed in 2013.
Read more →
Behavior selection algorithm

In artificial intelligence, a behavior selection algorithm, or action selection algorithm, is an algorithm that selects appropriate behaviors or actions for one or more intelligent agents. In game artificial intelligence, it selects behaviors or actions for one or more non-player characters. Common behavior selection algorithms include: Finite-state machines Hierarchical finite-state machines Decision trees Behavior trees Hierarchical task networks Hierarchical control systems Utility systems Dialogue tree (for selecting what to say) == Related concepts == In application programming, run-time selection of the behavior of a specific method is referred to as the strategy design pattern.
Read more →
System of record

A system of record (SOR) or source system of record (SSoR) is a data management term for an information storage system (commonly implemented on a computer system running a database management system) that is the authoritative data source for a given data element or piece of information, like for example a row (or record) in a table. In data vault it is referred to as the record source. == Background == The need to identify systems of record can become acute in organizations where management information systems have been built by taking output data from multiple source systems, re-processing this data, and then re-presenting the result for a new business use. In these cases, multiple information systems may disagree about the same piece of information. These disagreements may stem from semantic differences, differences in opinion, use of different sources, differences in the timing of the extract, transform, load processes that create the data they report against, or may simply be the result of bugs. == Use == The integrity and validity of any data set is open to question when there is no traceable connection to a good source, and listing a source system of record is a solution to this. Where the integrity of the data is vital, if there is an agreed system of record, the data element must either be linked to, or extracted directly from it. In other cases, the provenance and estimated data quality should be documented. The "system of record" approach is a good fit for environments where both: there is a single authority over all data consumers, and all consumers have similar needs == Trade-offs == In diverse environments, one instead needs to support the presence of multiple opinions. Consumers may accept different authorities or may differ on what constitutes an authoritative source—researchers may prefer carefully vetted data, while tactical military systems may require the most recent credible report.
Read more →
Pol.is

Polis (or Pol.is) is wiki survey software designed for large group collaborations. As a civic technology, Polis allows people to share their opinions and ideas, and its algorithm is intended to elevate ideas that can facilitate better decision-making, especially when there are lots of participants. Polis has been credited for assisting the passage of legislation in Taiwan. Pol.is has been used by governments in the United States, Canada, Singapore, Philippines, Finland, Spain and elsewhere. == History == Pol.is was founded by Colin Megill, Christopher Small, and Michael Bjorkegren after the Occupy Wall Street and Arab Spring movements. In Taiwan, pol.is has been "one of the key parts" of vTaiwan's suite of open-source tools for its citizen engagement efforts arising out of the Sunflower Student Movement. vTaiwan claims that of the 26 national issues related to technology discussed on the platform, 80% led to government action. Pol.is is also utilized by "Join," a national platform for online deliberation run by the Taiwanese government. In 2022, Wired reported that Polis was an influence on the Community Notes project at Twitter. In 2023, Megill advised OpenAI on how to facilitate deliberation at scale in a way that was more efficient than Polis, which still required significant human labor and analysis at the time. He helped to award $1 million in grants to teams working on solving the problem of deliberation at scale. In 2023, Anthropic was also exploring steering model behavior using Polis. In 2025, it helped the county that includes Bowling Green, Kentucky make a 25 year plan by facilitating the collection and review of ideas from thousands of residents, representing 10% of the county. 2,370 of 3,940 unique ideas were agreed-upon by over 80% of survey respondents. Ideas were screened by volunteers if they were redundant to an existing idea, off-topic or obscene. == How it works == Pol.is participants are anonymous and cannot reply directly to others posts, in an effort to avoid personal attacks for users. Its algorithms are designed not for engagement and scrolling, but to find areas of agreement to better understand the nuances of a wide range of opinions. Participants are prompted for ideas and vote on other participants' ideas. == Reception == Andrew Leonard, The Financial Times, and VentureBeat describe Pol.is as a possible antidote to the divisiveness of traditional internet discourse by gamifying consensus. Audrey Tang agreed saying, "Polis is quite well known in that it's a kind of social media that instead of polarizing people to drive so called engagement or addiction or attention, it automatically drives bridge making narratives and statements. So only the ideas that speak to both sides or to multiple sides will gain prominence in Polis." Niall Ferguson argues that the approach to utilize tools like Pol.is and Join in Taiwan empowers ordinary people instead of the elite and protects individual freedoms, providing a contrast to the AI-enhanced panopticon model seen in China. Carl Miller praised the technology as having "gamified finding consensus." Darshana Narayanan, in an op-ed in the Economist, argues that open-source machine-learning-based tools like Polis can help to bypass the influence of special interests or experts. Jamie Susskind cited polis and vTaiwan as a model for democracies, particularly around digital policy issues.
Read more →
Anderson's rule (computer science)

In the field of computer security, Anderson's rule refers to a principle formulated by Ross J. Anderson: systems that handle sensitive personal information involve a trilemma of security, functionality, and scale, of which you can choose any two. A system that has information on many data subjects and to which many people require access is hard to secure unless its functionality is severely restricted. If it has rich functionality, you may have to restrict the number of people with access, or accept that some information will leak.
Read more →
Conceptions of Library and Information Science

Conceptions of Library and Information Science (CoLIS) is a series of conferences about historical, empirical and theoretical perspectives in Library and Information Science. == CoLIS conferences == CoLIS 1 1991 in Tampere, Finland CoLIS 2 1996 in Copenhagen, Denmark CoLIS 3 1999 in Dubrovnik, Croatia CoLIS 4 2002 in Seattle, US CoLIS 5 2005 in Glasgow, Scotland CoLIS 6 2007 in Borås, Sweden CoLIS 7 June 2010 in London, at City University London. CoLIS 8 August 19–22, 2013, in Copenhagen, Denmark, at The Royal School of Library and Information Science. CoLIS 9 June 27–29, 2016, in Uppsala, Sweden, at Uppsala University. CoLIS 10 June 16–19, 2019, in Ljubljana, Slovenia, Faculty of Arts CoLIS 11 May 29–June 1, 2022, in Oslo, Norway, Oslo Metropolitan University.
Read more →
Ontology (information science)

In information science, an ontology encompasses a representation, formal naming, and definitions of the categories, properties, and relations between the concepts, data, or entities that pertain to one, many, or all domains of discourse. More simply, an ontology is a way of showing the properties of a subject area and how they are related, by defining a set of terms and relational expressions that represent the entities in that subject area. The field which studies ontologies so conceived is sometimes referred to as applied ontology. Every academic discipline or field, in creating its terminology, thereby lays the groundwork for an ontology. Each uses ontological assumptions to frame explicit theories, research and applications. Improved ontologies may improve problem solving within that domain, interoperability of data systems, and discoverability of data. Translating research papers within every field is a problem made easier when experts from different countries maintain a controlled vocabulary of jargon between each of their languages. For instance, the definition and ontology of economics is a primary concern in Marxist economics, but also in other subfields of economics. An example of economics relying on information science occurs in cases where a simulation or model is intended to enable economic decisions, such as determining what capital assets are at risk and by how much (see risk management). What ontologies in both information science and philosophy have in common is the attempt to represent entities, including both objects and events, with all their interdependent properties and relations, according to a system of categories. In both fields, there is considerable work on problems of ontology engineering (e.g., Quine and Kripke in philosophy, Sowa and Guarino in information science), and debates concerning to what extent normative ontology is possible (e.g., foundationalism and coherentism in philosophy, BFO and Cyc in artificial intelligence). Applied ontology is considered by some as a successor to prior work in philosophy. However many current efforts are more concerned with establishing controlled vocabularies of narrow domains than with philosophical first principles, or with questions such as the mode of existence of fixed essences or whether enduring objects (e.g., perdurantism and endurantism) may be ontologically more primary than processes. Artificial intelligence has retained considerable attention regarding applied ontology in subfields like natural language processing within machine translation and knowledge representation, but ontology editors are being used often in a range of fields, including biomedical informatics and industry. Such efforts often use ontology editing tools such as Protégé. == Ontology in philosophy == Ontology is a branch of philosophy and intersects areas such as metaphysics, epistemology, and philosophy of language, as it considers how knowledge, language, and perception relate to the nature of reality. Metaphysics deals with questions like "what exists?" and "what is the nature of reality?". One of five traditional branches of philosophy, metaphysics is concerned with exploring existence through properties, entities and relations such as those between particulars and universals, intrinsic and extrinsic properties, or essence and existence. Metaphysics has been an ongoing topic of discussion since recorded history. == Etymology == The compound word ontology combines onto-, from the Greek ὄν, on (gen. ὄντος, ontos), i.e. "being; that which is", which is the present participle of the verb εἰμί, eimí, i.e. "to be, I am", and -λογία, -logia, i.e. "logical discourse", see classical compounds for this type of word formation. While the etymology is Greek, the oldest extant record of the word itself, the Neo-Latin form ontologia, appeared in 1606 in the work Ogdoas Scholastica by Jacob Lorhard (Lorhardus) and in 1613 in the Lexicon philosophicum by Rudolf Göckel (Goclenius). The first occurrence in English of ontology as recorded by the OED (Oxford English Dictionary, online edition, 2008) came in Archeologia Philosophica Nova or New Principles of Philosophy (1663) by Gideon Harvey. == Formal ontology == Since the mid-1970s, researchers in the field of artificial intelligence (AI) have recognized that knowledge engineering is the key to building large and powerful AI systems. AI researchers argued that they could create new ontologies as computational models that enable certain kinds of automated reasoning, which was only marginally successful. In the 1980s, the AI community began to use the term ontology to refer to both a theory of a modeled world and a component of knowledge-based systems. In particular, David Powers introduced the word ontology to AI to refer to real world or robotic grounding, publishing in 1990 literature reviews emphasizing grounded ontology in association with the call for papers for a AAAI Summer Symposium Machine Learning of Natural Language and Ontology, with an expanded version published in SIGART Bulletin and included as a preface to the proceedings. Some researchers, drawing inspiration from philosophical ontologies, viewed computational ontology as a kind of applied philosophy. In 1993, the widely cited web page and paper "Toward Principles for the Design of Ontologies Used for Knowledge Sharing" by Tom Gruber used ontology as a technical term in computer science closely related to earlier idea of semantic networks and taxonomies. Gruber introduced the term as a specification of a conceptualization: An ontology is a description (like a formal specification of a program) of the concepts and relationships that can formally exist for an agent or a community of agents. This definition is consistent with the usage of ontology as set of concept definitions, but more general. And it is a different sense of the word than its use in philosophy. Attempting to distance ontologies from taxonomies and similar efforts in knowledge modeling that rely on classes and inheritance, Gruber stated (1993): Ontologies are often equated with taxonomic hierarchies of classes, class definitions, and the subsumption relation, but ontologies need not be limited to these forms. Ontologies are also not limited to conservative definitions, that is, definitions in the traditional logic sense that only introduce terminology and do not add any knowledge about the world (Enderton, 1972). To specify a conceptualization, one needs to state axioms that do constrain the possible interpretations for the defined terms. Recent experimental ontology frameworks have also explored resonance-based AI-human co-evolution structures, such as IAMF (Illumination AI Matrix Framework), OntoMotoOS (a meta-operating system concept for ethical and ontological AI–human co-evolution), and PSRT (Phase-Structural Reality Theory across multi-scale ontological layers). Though not yet widely adopted in academic discourse, such models propose phased approaches to ethical harmonization and structural emergence. As refinement of Gruber's definition Feilmayr and Wöß (2016) stated: "An ontology is a formal, explicit specification of a shared conceptualization that is characterized by high semantic expressiveness required for increased complexity." == Formal ontology components == Contemporary ontologies share many structural similarities, regardless of the language in which they are expressed. Most ontologies describe individuals (instances), classes (concepts), attributes and relations. === Types === ==== Domain ontology ==== A domain ontology (or domain-specific ontology) represents concepts which belong to a realm of the world, such as biology or politics. Each domain ontology typically models domain-specific definitions of terms. For example, the word card has many different meanings. An ontology about the domain of poker would model the "playing card" meaning of the word, while an ontology about the domain of computer hardware would model the "punched card" and "video card" meanings. Since domain ontologies are written by different people, they represent concepts in very specific and unique ways, and are often incompatible within the same project. As systems that rely on domain ontologies expand, they often need to merge domain ontologies by hand-tuning each entity or using a combination of software merging and hand-tuning. This presents a challenge to the ontology designer. Different ontologies in the same domain arise due to different languages, different intended usage of the ontologies, and different perceptions of the domain (based on cultural background, education, ideology, etc.). At present, merging ontologies that are not developed from a common upper ontology is a largely manual process and therefore time-consuming and expensive. Domain ontologies that use the same upper ontology to provide a set of basic elements with which to specify the meanings of the domain ontology entities can be merged with less effo
Read more →
Automatic image annotation

Automatic image annotation (also known as automatic image tagging or linguistic indexing) is the process by which a computer system automatically assigns metadata in the form of captioning or keywords to a digital image. This application of computer vision techniques is used in image retrieval systems to organize and locate images of interest from a database. This method can be regarded as a type of multi-class image classification with a very large number of classes - as large as the vocabulary size. Typically, image analysis in the form of extracted feature vectors and the training annotation words are used by machine learning techniques to attempt to automatically apply annotations to new images. The first methods learned the correlations between image features and training annotations. Subsequently, techniques were developed using machine translation to attempt to translate the textual vocabulary into the 'visual vocabulary,' represented by clustered regions known as blobs. Subsequent work has included classification approaches, relevance models, and other related methods. The advantages of automatic image annotation versus content-based image retrieval (CBIR) are that queries can be more naturally specified by the user. At present, Content-Based Image Retrieval (CBIR) generally requires users to search by image concepts such as color and texture or by finding example queries. However, certain image features in example images may override the concept that the user is truly focusing on. Traditional methods of image retrieval, such as those used by libraries, have relied on manually annotated images, which is expensive and time-consuming, especially given the large and constantly growing image databases in existence.
Read more →
Mastodon (social network)

Mastodon is a free and open-source software platform for decentralized social networking with microblogging features similar to Twitter. It operates as a federated network of independently managed servers that communicate using the ActivityPub protocol, allowing users to connect across different instances within the Fediverse. Each Mastodon instance establishes its own moderation policies and content guidelines, distinguishing it from centrally controlled social media platforms. First released in 2016 by Eugen Rochko, Mastodon has positioned itself as an alternative to mainstream social media, particularly for users seeking decentralized, community-driven spaces. The platform has experienced multiple surges in adoption, most notably following the Twitter acquisition by Elon Musk in 2022, as users sought alternatives to Twitter. It is part of a broader shift toward decentralized social networks, including Bluesky and Lemmy. Mastodon emphasizes user privacy and moderation flexibility, offering features such as granular post visibility controls, content warning options, and local community-driven moderation. The software is written in Ruby on Rails and Node.js, with a web interface built using React and Redux. It is interoperable with other ActivityPub-based platforms, such as Threads, and supports various third-party applications on desktop and mobile devices. == Functionality == Users post short-form status messages, historically known as "toots", for others to see and interact with. On a standard Mastodon instance, these messages can include up to 500 text-based characters, greater than Twitter's 280-character limit. Some instances support even longer messages. Images, audio files, videos or polls can also be added to a message. Users join a specific Mastodon server, rather than a single centralized website or application. The servers are connected as nodes in a network, and each server can administer its own rules, account privileges, and whether to share messages to and from other servers. Users can communicate and follow each other across connected Mastodon servers with usernames similar in format to full email addresses. Since version 2.9.0, Mastodon's web user interface has offered a single-column mode for new users by default. In advanced mode, the interface approximates the microblogging interface of TweetDeck. === Privacy === Mastodon includes a number of specific privacy features. Each message has a variety of privacy options available, and users can choose whether the message is public or private. Messages can display public on a global feed, known as a timeline, or can be shared only to the user's followers. Messages can also be marked as unlisted from timelines or direct between users. Users can also mark their accounts as completely private. In the timeline, messages can display with an optional content warning feature, which requires readers to click on the hidden main body of the message to reveal it. Mastodon servers have used this feature to hide spoilers, trigger warnings, and not safe for work (NSFW) content, though some accounts use the feature to hide links and thoughts others might not want to read. Mastodon aggregates messages in local and federated timelines in real time. The local timeline shows messages from users on a singular server, while the federated timeline shows messages across all participating Mastodon servers. === Content moderation === In early 2017, journalists like Sarah Jeong distinguished Mastodon from Twitter for its approach to combating harassment. Mastodon uses community-based moderation, in which each server can limit or filter out undesirable types of content, while Twitter uses a single, global policy on content moderation. Servers can choose to limit or filter out messages with disparaging content. The founder of Mastodon, Eugen Rochko, believes that small, closely related communities deal with unwanted behavior more effectively than a large company's small safety team. In Move Slowly and Build Bridges, Robert W. Gehl argues that predominantly white participation has shaped Mastodon in ways that affect how reports of racism are received and limit its ability to replicate Black Twitter on Twitter. Users can also block and report others to administrators, much like on Twitter. Instance administrators can block other instances from interacting with their own, an action called defederation. By posting toots hashtagged with #fediblock, some instance administrators and users alert others of issues requiring moderation. === Searching === Mastodon by default allows searching for hashtags and mentioned accounts in the Fediverse. Server administrators can optionally enable Elasticsearch to search the full-text of public posts that have opted in to being indexed. == Versions == In September 2018, with the release of version 2.5 with redesigned public profile pages, Mastodon marked its 100th release. Mastodon 2.6 was released in October 2018, introducing the possibilities of verified profiles and live, in-stream link previews for images and videos. Version 2.7, in January 2019, made it possible to search for multiple hashtags at once, instead of searching for just a single hashtag, with more robust moderation capabilities for server administrators and moderators, while accessibility, such as contrast for users with sight issues, was improved. The ability for users to create and vote in polls, as well as a new invitation system to manage registrations was integrated in April 2019. Mastodon 2.8.1, released in May 2019, made images with content warnings blurred instead of completely hidden. In version 2.9 in June 2019, an optional single-column view was added. This view became the default displayed to new users, with a user "preferences" option to switch to a multiple-column-based view. In August 2020, Mastodon 3.2 was released. It included a redesigned audio player with custom thumbnails and the ability to add personal notes to one's profile. In July 2021, an official client for iOS devices was released. According to the project's then CEO, Eugen Rochko, the release was part of an effort to attract new users. Mastodon 4.0 was released in November 2022, including language support for translating posts, editing posts and following hashtags. Mastodon 4.5 was released in November 2025. Among other features it introduced quote posts, which were previously rejected from being implemented due to concerns about toxicity and harassment. To mitigate these issues Mastodon's quote post feature has been designed in a way that lets users decide if and by whom their posts can be quoted. == Software == Mastodon is published as free and open-source software under the Affero GPL license, allowing anyone to use the software or modify it as they wish. Servers can be run by any individual or organization, and users can join these servers as they wish. The server software itself is powered by Ruby on Rails and Node.js, with its web client being written in React.js and Redux. The only database software supported is PostgreSQL, with Redis being used for job processing and various actions that Mastodon needs to process. The service is interoperable with the fediverse, a collection of social networking services which use the ActivityPub protocol for communication between each other, with previous versions containing support for OStatus. Client apps for interacting with the Mastodon API are available for desktop computer operating systems, including Windows, macOS and the Linux family of operating systems, as well as mobile phones running iOS and Android. The API is open for anyone to utilize, allowing clients to be built for any operating system that can connect to the internet. === Integration with Fediverse === Mastodon uses the ActivityPub protocol for federation; this allows users to communicate between independent Mastodon instances and other ActivityPub compatible services. Thus, Mastodon is generally considered to be a part of the Fediverse. Services utilizing the ActivityPub protocol exist which allow for searching all posts on all instances as long as users opt-in. For similar reasons, only hashtags can appear in a Mastodon instance's trending topics, not arbitrary popular words. Trending topics vary between instances, since individual instances are aware of different subsets of posts from the whole fediverse. === Security concerns === While Mastodon's decentralized structure is one of its most distinctive features, it also poses additional security challenges. Since many Mastodon instances are run by volunteers, some security experts are concerned about data security and responsiveness to new threats and vulnerabilities across the network, considering the difficulty of configuring and maintaining an instance as well as uneven skill levels among administrators. Administrators of an instance also have access to the private information of any users that are either registered with that instance or have federated
Read more →
Authoritative Legal Entity Identifier

An Authoritative Legal Entity Identifier (ALEI) is the identifier assigned by a government jurisdiction authorized by statute or decree to create a legal entity and to maintain the authoritative registries of legal entities. ALEIs are used within supply chain data, ERP applications and master data management systems to support accurate and consistent identification of entities in digital records, supply chains, and government databases. ALEIs are described in the international standard ISO 8000-116, which outlines a structured format that makes the locally unique identifier into a globally unique one and ensures global interoperability and data quality. == Structure == An ALEI is composed of three main components: a prefix that identifies the jurisdiction and register, a subdomain element (optional), and the local registration number of the entity. For example, the identifier "US-DE.BER:3031657" refers to an entity registered in the Delaware Business Entity Register in the United States. The standardization of this structure is governed by ISO 8000-116, which is designed to ensure each ALEI is globally unique and resolvable. == Comparison with other identifiers == ALEIs differ from proxy identifiers such as the DUNS number, NCAGE code, or the Legal Entity Identifier (LEI) managed by GLEIF. While proxy identifiers can be issued by institutions that do not create legal entities, ALEIs are created and maintained by public bodies with the authority to form and register legal entities. This authoritative origin makes ALEIs particularly suitable for applications involving legal traceability, government regulation, and international transparency efforts. == Usage == ALEIs are increasingly utilized to identify legal entities in public and private datasets. The identifiers support supply chain accuracy, regulatory compliance, and the unification of master data. The first practical implementation of an ALEI was the International Business Registration Number (IBRN), developed to provide globally unique identifiers for registered business entities. IBRNs are issued by authorized government jurisdictions and are used to verify entities across borders, particularly in the context of trade facilitation and data exchange systems. For instance, business directories and registration systems in U.S. states like Connecticut provide structured registration documents that can be used to verify the ALEIs they issue. The use of ALEIs has been recommended by international organizations such as the Extractive Industries Transparency Initiative (EITI) and Open ownership to improve beneficial ownership registries. == Policy and regulation == ALEIs have been referenced in policy consultations such as those related to the U.S. Financial Data Transparency Act. Federal institutions including the Federal Reserve and FDIC have examined the potential for ALEIs to unify entity identification across regulatory databases.
Read more →
Savepoint

A savepoint is a way of implementing subtransactions (also known as nested transactions) within a relational database management system by indicating a point within a transaction that can be "rolled back to" without affecting any work done in the transaction before the savepoint was created. Multiple savepoints can exist within a single transaction. Savepoints are useful for implementing complex error recovery in database applications. If an error occurs in the midst of a multiple-statement transaction, the application may be able to recover from the error (by rolling back to a savepoint) without needing to abort the entire transaction. A savepoint can be declared by issuing a SAVEPOINT name statement. All changes made after a savepoint has been declared can be undone by issuing a ROLLBACK TO SAVEPOINT name command. Issuing RELEASE SAVEPOINT name will cause the named savepoint to be discarded, but will not otherwise affect anything. Issuing the commands ROLLBACK or COMMIT will also discard any savepoints created since the start of the main transaction. Savepoints are defined in the SQL standard and are supported by all established SQL relational databases, including PostgreSQL, Oracle Database, Microsoft SQL Server, MySQL, IBM Db2, SQLite (since 3.6.8), Firebird, H2 Database Engine, and Informix (since version 11.50xC3).
Read more →