AI Assistant Box

AI Assistant Box — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Blanking (video)

  In analog video, blanking occurs between horizontal lines and between frames. In raster scan equipment, an image is built up by scanning an electron beam from left to right across a screen to produce a visible trace of one scan line, reducing the brightness of the beam to zero (horizontal blanking), moving it back as fast as possible to the left of the screen at a slightly lower position (the next scan line), restoring the brightness, and continuing until all the lines have been displayed and the beam is at the bottom right of the screen. Its intensity is then reduced to zero again (vertical blanking), and it is rapidly moved to the top left to start again, creating the next frame. In television, in particular, the vertical blanking interval is long to accommodate the slow equipment available at the time the standard was set. Fast modern electronics allows digital information to be encoded into the signal during the vertical blanking interval; it is not displayed on screen as the beam is blanked, but can be processed by appropriate circuitry.

  Read more →
• 

  Magic Quadrant

  Magic Quadrant (MQ) is a series of market research reports published by research and advisory firm Gartner that rely on proprietary qualitative data analysis methods to demonstrate market trends, such as direction, maturity, and participants. Their analyses are conducted for several specific technology industries and are updated every 1–2 years: once an updated report has been published, its predecessor is "retired". == Rating == Gartner rates vendors upon two criteria: completeness of vision and ability to execute. Completeness of vision – Reflects the vendor's innovation, and whether the vendor drives or follows the market. Ability to execute – Summarizes factors such as the vendor's financial viability, market responsiveness, product development, sales channels and customer base. The two component scores lead to a vendor position in one of four quadrants: === Leaders === Vendors in the "Leaders" quadrant have the highest composite scores for their completeness of vision and ability to execute. A vendor in the Leaders quadrant has the market share, credibility, and marketing & sales capabilities needed to drive the acceptance of new technologies. These vendors demonstrate a clear understanding of market needs, they are innovators and thought leaders, and they have well-articulated plans that customers and prospects can use when designing their infrastructures and strategies. In addition, they have a presence in the five major geographical regions, consistent financial performance, and broad platform support. === Challengers === Vendors in the "Challengers" quadrant have high scores mainly for their ability to execute. They both participate in the market and execute well enough to be a serious threat to vendors in the "Leaders" quadrant. They have strong products, as well as sufficiently credible market position and resources to sustain continued growth. Financial viability is not an issue for vendors in the "Challengers" quadrant, but they lack the size and influence of vendors in the "Leaders" quadrant due to their relative lack of vision. === Visionaries === Vendors in the "Visionaries" quadrant have high scores mainly for their completeness of vision. They deliver innovative products that address operationally or financially important end-user problems at a broad scale, but have not yet demonstrated the ability to capture market share or maintain sustainable levels of profitability. Visionary vendors are frequently privately held companies and acquisition targets for larger, established companies. The likelihood of acquisition often reduces the risks associated with installing their systems. === Niche Players === Vendors in the "Niche Players" quadrant have relatively low scores for both their ability to execute and their completeness of vision. They are often narrowly focused on specific market or vertical segments. This quadrant often also includes vendors that are adapting their existing products to enter the market under consideration, or larger vendors having difficulty developing and executing on their vision. == Gartner Critical Capabilities == Gartner Critical Capabilities complement Magic Quadrant analysis to offer deeper insight into the products and services offered by multiple vendors by a comparative analysis that scores competing products or services against a set of critical differentiators identified by Gartner. Gartner has periodically ended Magic Quadrant listings for IT Service Management, Web Content Management, and other industries as those markets have fully matured or other factors rendered the analytic framework inapplicable. == Criticism == The Magic Quadrant, and analysts in general, skew the market: according to research, by applying their methodologies to describe a market, they change that marketplace to fit their tools. Another criticism is that open source vendors are not considered sufficiently by analysts like Gartner, as has been published in an online discussion between a VP from Talend and a German Research VP from Gartner. On May 29, 2009 (2009-05-29), software vendor ZL Technologies filed a federal lawsuit against Gartner that challenged the "legitimacy" of Gartner's Magic Quadrant rating system. Gartner filed a motion to dismiss by claiming First Amendment protection since it contends that its MQ reports contain "pure opinion", which legally means opinions that are not based on fact. The court threw out the ZL case because it lacked a specific complaint. The decision was upheld on appeal.

  Read more →
• 

  Algorithm characterizations

  Algorithm characterizations are attempts to formalize the word algorithm. Algorithm does not have a generally accepted formal definition. Researchers are actively working on this problem. This article will present some of the "characterizations" of the notion of "algorithm" in more detail. == The problem of definition == Over the last 200 years, the definition of the algorithm has become more complicated and detailed as researchers have tried to pin down the term. Indeed, there may be more than one type of "algorithm". But most agree that algorithm has something to do with defining generalized processes for the creation of "output" integers from other "input" integers – "input parameters" arbitrary and infinite in extent, or limited in extent but still variable—by the manipulation of distinguishable symbols (counting numbers) with finite collections of rules that a person can perform with paper and pencil. The most common number-manipulation schemes—both in formal mathematics and in routine life—are: (1) the recursive functions calculated by a person with paper and pencil, and (2) the Turing machine or its Turing equivalents—the primitive register-machine or "counter-machine" model, the random-access machine model (RAM), the random-access stored-program machine model (RASP) and its functional equivalent "the computer". When we are doing "arithmetic" we are really calculating by the use of "recursive functions" in the shorthand algorithms we learned in grade school, for example, adding and subtracting. The proofs that every "recursive function" we can calculate by hand we can compute by machine and vice versa—note the usage of the words calculate versus compute—is remarkable. But this equivalence together with the thesis (unproven assertion) that this includes every calculation/computation indicates why so much emphasis has been placed upon the use of Turing-equivalent machines in the definition of specific algorithms, and why the definition of "algorithm" itself often refers back to "the Turing machine". This is discussed in more detail under Stephen Kleene's characterization. The following are summaries of the more famous characterizations (Kleene, Markov, Knuth) together with those that introduce novel elements—elements that further expand the definition or contribute to a more precise definition. [ A mathematical problem and its result can be considered as two points in a space, and the solution consists of a sequence of steps or a path linking them. Quality of the solution is a function of the path. There might be more than one attribute defined for the path, e.g. length, complexity of shape, an ease of generalizing, difficulty, and so on. ] == Chomsky hierarchy == There is more consensus on the "characterization" of the notion of "simple algorithm". All algorithms need to be specified in a formal language, and the "simplicity notion" arises from the simplicity of the language. The Chomsky (1956) hierarchy is a containment hierarchy of classes of formal grammars that generate formal languages. It is used for classifying of programming languages and abstract machines. From the Chomsky hierarchy perspective, if the algorithm can be specified on a simpler language (than unrestricted), it can be characterized by this kind of language, else it is a typical "unrestricted algorithm". Examples: a "general purpose" macro language, like M4 is unrestricted (Turing complete), but the C preprocessor macro language is not, so any algorithm expressed in C preprocessor is a "simple algorithm". See also Relationships between complexity classes. == Features of a good algorithm == The following are desirable features of a well-defined algorithm, as discussed in Scheider and Gersting (1995): Unambiguous Operations: an algorithm must have specific, outlined steps. The steps should be exact enough to precisely specify what to do at each step. Well-Ordered: The exact order of operations performed in an algorithm should be concretely defined. Feasibility: All steps of an algorithm should be possible (also known as effectively computable). Input: an algorithm should be able to accept a well-defined set of inputs. Output: an algorithm should produce some result as an output, so that its correctness can be reasoned about. Finiteness: an algorithm should terminate after a finite number of instructions. Properties of specific algorithms that may be desirable include space and time efficiency, generality (i.e. being able to handle many inputs), or determinism. == 1881 John Venn's negative reaction to W. Stanley Jevons's Logical Machine of 1870 == In early 1870 W. Stanley Jevons presented a "Logical Machine" (Jevons 1880:200) for analyzing a syllogism or other logical form e.g. an argument reduced to a Boolean equation. By means of what Couturat (1914) called a "sort of logical piano [,] ... the equalities which represent the premises ... are "played" on a keyboard like that of a typewriter. ... When all the premises have been "played", the panel shows only those constituents whose sum is equal to 1, that is, ... its logical whole. This mechanical method has the advantage over VENN's geometrical method..." (Couturat 1914:75). For his part John Venn, a logician contemporary to Jevons, was less than thrilled, opining that "it does not seem to me that any contrivances at present known or likely to be discovered really deserve the name of logical machines" (italics added, Venn 1881:120). But of historical use to the developing notion of "algorithm" is his explanation for his negative reaction with respect to a machine that "may subserve a really valuable purpose by enabling us to avoid otherwise inevitable labor": (1) "There is, first, the statement of our data in accurate logical language", (2) "Then secondly, we have to throw these statements into a form fit for the engine to work with – in this case the reduction of each proposition to its elementary denials", (3) "Thirdly, there is the combination or further treatment of our premises after such reduction," (4) "Finally, the results have to be interpreted or read off. This last generally gives rise to much opening for skill and sagacity." He concludes that "I cannot see that any machine can hope to help us except in the third of these steps; so that it seems very doubtful whether any thing of this sort really deserves the name of a logical engine."(Venn 1881:119–121). == 1943, 1952 Stephen Kleene's characterization == This section is longer and more detailed than the others because of its importance to the topic: Kleene was the first to propose that all calculations/computations—of every sort, the totality of—can equivalently be (i) calculated by use of five "primitive recursive operators" plus one special operator called the mu-operator, or be (ii) computed by the actions of a Turing machine or an equivalent model. Furthermore, he opined that either of these would stand as a definition of algorithm. A reader first confronting the words that follow may well be confused, so a brief explanation is in order. Calculation means done by hand, computation means done by Turing machine (or equivalent). (Sometimes an author slips and interchanges the words). A "function" can be thought of as an "input-output box" into which a person puts natural numbers called "arguments" or "parameters" (but only the counting numbers including 0—the nonnegative integers) and gets out a single nonnegative integer (conventionally called "the answer"). Think of the "function-box" as a little man either calculating by hand using "general recursion" or computing by Turing machine (or an equivalent machine). "Effectively calculable/computable" is more generic and means "calculable/computable by some procedure, method, technique ... whatever...". "General recursive" was Kleene's way of writing what today is called just "recursion"; however, "primitive recursion"—calculation by use of the five recursive operators—is a lesser form of recursion that lacks access to the sixth, additional, mu-operator that is needed only in rare instances. Thus most of life goes on requiring only the "primitive recursive functions." === 1943 "Thesis I", 1952 "Church's Thesis" === In 1943 Kleene proposed what has come to be known as Church's thesis: "Thesis I. Every effectively calculable function (effectively decidable predicate) is general recursive" (First stated by Kleene in 1943 (reprinted page 274 in Davis, ed. The Undecidable; appears also verbatim in Kleene (1952) p.300) In a nutshell: to calculate any function the only operations a person needs (technically, formally) are the 6 primitive operators of "general" recursion (nowadays called the operators of the mu recursive functions). Kleene's first statement of this was under the section title "12. Algorithmic theories". He would later amplify it in his text (1952) as follows: "Thesis I and its converse provide the exact definition of the notion of a calculation (decision) procedure or algorithm, for the

  Read more →
• 

  Collaborative diffusion

  Collaborative Diffusion is a type of pathfinding algorithm which uses the concept of antiobjects, objects within a computer program that function opposite to what would be conventionally expected. Collaborative Diffusion is typically used in video games, when multiple agents must path towards a single target agent. For example, the ghosts in Pac-Man. In this case, the background tiles serve as antiobjects, carrying out the necessary calculations for creating a path and having the foreground objects react accordingly, whereas having foreground objects be responsible for their own pathing would be conventionally expected. Collaborative Diffusion is favored for its efficiency over other pathfinding algorithms, such as A, when handling multiple agents. Also, this method allows elements of competition and teamwork to easily be incorporated between tracking agents. Notably, the time taken to calculate paths remains constant as the number of agents increases.

  Read more →
• 

  Nolot

  Nolot is a chess test suite with 11 positions from real games. They were compiled by Pierre Nolot (French: [nɔ.lo]) for the French chess magazine Gambisco and posted on the rec.games.chess Usenet group in 1994. They were designed to be particularly hard to solve for chess engines to solve at the time, although modern engines can find a solution near-instantaneously. == Problem 1 == FEN: r3qb1k/1b4p1/p2pr2p/3n4/Pnp1N1N1/6RP/1B3PP1/1B1QR1K1 w - - 0 1 26.Nxh6!! c3 (26... Rxh6 27.Nxd6 Qh5 (best) 28.Rg5! Qxd1 29.Nf7+ Kg8 30.Nxh6+ Kh8 31.Rxd1 c3 32.Nf7+ Kg8 33.Bg6! Nf4 34.Bxc3 Nxg6 35.Bxb4 Kxf7 36.Rd7+ Kf6 37.Rxg6+ Kxg6 38.Rxb7 ±) 27.Nf5! cxb2 28.Qg4 Bc8 (28... g6!? 29.Kh2! 29.Qd7 30.Nh4 Bc6 31.Nc5! dxc 32.Rxe6 Nf6 33.Nxg6+ Kg7 34.Qg5 Nbd5 35.Ne5 Kh8 36.Nxd7 ±) 29.Qh4+ Rh6 30.Nxh6 gxh6 31.Kh2! Qe5 32.Ng5 Qf6 33.Re8 Bf5 34.Qxh6 (missing a mate in 6: 34.Nf7+ Qxf7 35.Qxh6+ Bh7 36.Rxa8 Nf6 37.Rxf8 Qxf8 38.Qxf8+ Ng8 39.Qg7#) 34...Qxh6 35.Nf7+ Kh7 36.Bxf5+ Qg6 37.Bxg6+ Kg7 38.Rxa8 Be7 39.Rb8 a5 40.Be4+ Kxf7 41.Bxd5+ 1–0 The best Novag computer, the Diablo 68000, finds 26. Nxh6 after seven and a half months (Pierre Nolot has let it run on the position for 14 months and one day, until a power failure stopped an analysis of over 80,000,000,000 nodes.) but for wrong reasons: it evaluates white's position as inferior and thinks this move would enable it to draw. Today Gambit Tiger 2.0 for example can find it quite quickly: Most free engines running on 64-bit processors in 2010 could solve this problem and the others in a few seconds. 1.Qd4 c3 2.Bxc3 Nxc3 3.Qxb4 Nxe4 4.Qxb7 Rb8 5.Qxb8 Qxb8 6.Bxe4 d5 7.Rb1 μ (-1.20) Depth: 12 00:00:09 6055 kN 1.Nxh6 c3 2.Nf5 cxb2 3.Qg4 Rb8 4.Nxg7 Rg6 5.Qxg6 Qxg6 6.Rxg6 Bxg7 7.Nxd6 ³ (-0.48) Depth: 12 00:00:21 14368 kN 1.Nxh6 c3 2.Nf5 cxb2 3.Qg4 Rc8 4.Nxg7 Rg6 5.Nxe8 Rxg4 6.Rxg4 Rxe8 7.Rg6 μ (-0.74) Depth: 13 00:00:55 38455 kN 1.Ne3 Rxe4 2.Bxe4 Qxe4 3.Nxd5 Qxd5 4.Qc1 Qf5 5.Qxh6+ Qh7 6.Qe6 Nd3 7.Re2 Nxb2 8.Rxb2 ³ (-0.58) Depth: 13 00:01:30 62979 kN 1.Ne3 Rxe4 ³ (-0.58) Depth: 14 00:02:02 84941 kN 1.Ne3 Nxe3 2.Rexe3 Bxe4 3.Qg4 Rg6 4.Qxe4 Qxe4 5.Bxe4 Rxg3 6.Rxg3 d5 7.Bf5 Re8 8.Bc3 ³ (-0.30) Depth: 15 00:03:05 128968 kN 1.Nxh6 ² (0.32) Depth: 15 00:07:58 350813 kN With the next ply showing a clear advantage. Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of Nxh6!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 19/32 00:01 7708k 4882k +3,00 Nxh6 Rxh6 Nxd6 Qh5 Bg6 Qxd1 Nf7+ Kg8 Nxh6+ gxh6 Bh5+ Kh7 Rxd1 c3 Bxc3 Nxc3 Rd7+ Kh8 Rxb7 Ne4 Re3 Nxf2 Kxf2 Bc5 Ke2 Bxe3 Kxe3 Nd5+ Kf2 49/73 15:02 5118270k 5673k +6,15 Nxh6 Rxh6 Nxd6 Qh5 Rg5 Qxd1 Nf7+ Kg8 Nxh6+ Kh8 Rxd1 c3 Nf7+ Kg8 Bg6 Nf4 Bxc3 Nbd5 Rb1 Bc6 Bd2 Nxg6 Rxg6 Ne7 Rxc6 Nxc6 Rb6 Rc8 Ng5 a5 Ra6 Bb4 Be3 Ne5 Bd4 Nc6 Bb6 Bd2 h4 Kf8 Bc5+ Kg8 Be3 Bxe3 fxe3 Kf8 Kf2 Ke7 Nf3 Kd7 Rb6 Ne7 Rb5 Kd6 Rxa5 Rc2+ Kg3 Re2 Nd4 Rxe3+ Kf4 Rd3 Nf5+ Kc7 Nxe7 == Problem 2 == FEN: r4rk1/pp1n1p1p/1nqP2p1/2b1P1B1/4NQ2/1B3P2/PP2K2P/2R5 w - - 0 1 22.Rxc5!! Nxc5 23.Nf6+ Kh8 24.Qh4 Qb5+ (computers think there is perpetual check here, but...) 25.Ke3! 25... h5 26.Nxh5 Qxb3+ (26... d5+ 27.Bxd5 Qd3 28.Kf2 Ne4+ 29.Bxe4 Qd4+ 30.Kg2 Qxb2+ 31.Kh3 ±) and White won in 41 moves. Today Deep Junior 8.ZX for example finds it very quickly (around 1 minute): 1.Kd1 Rac8 2.Bh6 Qb5 3.Rc3 Qf1+ 4.Kc2 Rc6 5.Bxf8 −+ (-2.11) Depth: 12 00:00:04 10422 kN 1.Nxc5 Nxc5 2.Rxc5 Qxc5 3.e6 Rae8 4.e7 Nc8 5.Kf1 Nxd6 6.Bf6 b5 −+ (-2.10) Depth: 12 00:00:14 25054 kN 1.Bf6! μ (-1.35) Depth: 12 00:00:17 34601 kN 1.Bf6 Qb5+ 2.Ke1 Bb4+ 3.Kf2 Bc5+ = (0.00) Depth: 12 00:00:20 34601 kN 1.Bf6 Qb5+ 2.Ke1 Nxf6 3.Nxf6+ Kg7 4.Nh5+ gxh5 5.Qf6+ Kg8 6.Qg5+ Kh8 7.Qf6+ = (0.00) Depth: 15 00:01:01 130544 kN 1.Rxc5! = (0.15) Depth: 15 00:01:12 145875 kN 1.Rxc5 Nxc5 2.Nf6+ Kh8 3.Qh4 Qb5+ 4.Ke3 h5 5.Nxh5 Qd3+ 6.Kf2 Ne4+ 7.fxe4 Qd4+ 8.Kf1 Qd3+ 9.Ke1 Qb1+ 10.Bd1 ± (2.18) Depth: 15 00:01:18 145875 kN Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of Rxc5!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/25 00:01 5822k 5545k +6,61 Rxc5 Qxc5 Nxc5 Nxc5 Bh6 Nbd7 Bxf8 Rxf8 Qe3 Rc8 f4 Nxe5 Qxe5 Ne6 Bxe6 Rc2+ Kd3 Rxh2 46/86 11:27 5057055k 7355k +7,61 Rxc5 Qxc5 Nxc5 Nxc5 Bf6 Ne6 Qh6 Nd4+ Kf2 Nf5 Qg5 Nd7 h4 Nxf6 Qxf6 Ng7 d7 b5 Bd5 Rab8 b4 Nh5 Bxf7+ Rxf7 d8R+ Rxd8 Qxd8+ Rf8 Qd5+ Kg7 e6 Kf6 Qd7 Ng7 Qd4+ Kxe6 Qxg7 Rf7 Qc3 Ke7 Qc5+ Ke8 Qc8+ Ke7 h5 gxh5 Kg3 h4+ Kh2 h6 Qc5+ Kf6 Qxb5 Kg7 f4 Rxf4 Qe5+ Rf6 b5 h3 Qd4 Kg8 Qxf6 h5 Blacks 22. .. Nxc5 is suboptimal and leads faster mate 77/44 09:18 6987714k 12518k +M22 Nf6+ Kh8 Qh4 Qb5+ Ke3 Qxb3+ axb3 h5 Nxh5 Nd5+ Kd4 Ne6+ Kxd5 Nxg5 Qxg5 gxh5 f4 Rad8 f5 f6 Qxh5+ Kg7 Qg6+ Kh8 e6 b6 e7 Rb8 exf8Q+ Rxf8 Ke6 b5 Ke7 Rb8 Qh5+ Kg7 Qf7+ Kh8 Kxf6 Rf8 Qxf8+ Kh7 Qg7+ == Problem 3 == FEN: r2qk2r/ppp1b1pp/2n1p3/3pP1n1/3P2b1/2PB1NN1/PP4PP/R1BQK2R w KQkq - 0 1 12.Nxg5!! Bxd1 13.Nxe6 Qb8 14.Nxg7+!! Kf8 15.Bh6! Bg4 16.0-0+ Kg8 17.Rf4 ± White wins with a queen sac but black has defensive resources. Stockfish 8 64bit 3CPU running on 2016 hardware recognizes the significance of Nxg5!! in 55 seconds. Stockfish 14 dev (Stockfish_21092606_x64_avx2) 64bit 4CPU running on 2020 hardware recognizes the significance of Nxg5!! in 1 second. NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/34 00:01 8291k 4530k +2,78 Nxg5 Bxd1 Nxe6 Qb8 Nxg7+ Kd8 Kxd1 b5 N3f5 Bf8 Rf1 Kc8 Nh5 Kb7 Bxb5 Ne7 g4 a6 Ba4 Nxf5 gxf5 Ka7 Nf4 c5 47/59 37:49 10390430k 4578k +3,16 Nxg5 Bxd1 Nxe6 Qb8 Nxg7+ Kd8 Kxd1 b5 Rf1 Kc8 N3f5 Bf8 Ne6 Kd7 Nf4 Ne7 g4 a5 Ke2 Qb7 h4 Ra6 a3 Kc8 Be3 Kb8 Kf3 Rb6 Bd2 Qc8 Kg3 c5 Be3 c4 Nxe7 Bxe7 Bf5 Qd8 h5 Qg8 Kh3 Bg5 Rf3 Ra6 Raf1 b4 Nxd5 Qxd5 Bxg5 bxc3 bxc3 Rb6 Be3 Rb3 Blacks 14 .. Kf8 is suboptimal and leads loss fast 41/68 06:31 3269727k 8350k +9,28 Bh6 Kg8 Rxd1 Bf8 N3h5 Bxg7 Nxg7 Qf8 Nf5 Ne7 Bxf8 Nxf5 Bxf5 Rxf8 Be6+ Kg7 Rd3 Rf4 Bxd5 c6 Rg3+ Kf8 Rf3 Rxf3 Bxf3 Kg7 Rf1 Re8 Be4 Re6 Ke2 a5 Ke3 Rh6 h3 a4 Kf4 Re6 h4 Re8 Ke3 h6 h5 Rf8 Rxf8 Kxf8 == Problem 4 == FEN: r1b1kb1r/1p1n1ppp/p2ppn2/6BB/2qNP3/2N5/PPP2PPP/R2Q1RK1 w kq - 0 1 10.Nxe6!! Qxe6 11.Nd5 Kd8 12.Bg4 Qe5 13.f4 Qxe4 (13...Qxb2 stronger but not sufficient: 14.Bxd7 Bxd7 15.Rb1 Qa3 16.Nxf6 Bb5 17.Qd4 Qc5 18.Rfd1 ±) 14.Bxd7 Bxd7 15.Nxf6 gxf6 16.Bxf6+ Kc7 17.Bxh8 and Black resigned on move 27. Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of 10.Nxe6 in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 22/37 00:01 6955k 5367k +4,00 Nxe6 Qxe6 Nd5 Kd8 Bg4 Qe5 f4 Qxb2 Rb1 Qa3 Bxd7 Bxd7 Nxf6 Bb5 Rf3 Qxa2 c4 Bxc4 Rf2 Qa5 Nd5+ f6 Nxf6 Kc7 Rc1 b5 Qd5 gxf6 Bxf6 Kb8 Rxc4 Qe1+ Rf1 51/70 47:10 14538911k 5137k +5,76 Nxe6 Qxe6 Nd5 Kd8 Bg4 Qe5 f4 Qxe4 Bxd7 Bxd7 Nxf6 Qf5 Qd4 Kc8 Nd5 Bc6 c4 f6 Nb6+ Kb8 Bh4 Be7 Rae1 Bd8 Nxa8 Kxa8 Bf2 Kb8 Qxd6+ Bc7 Ba7+ Kc8 Qe6+ Qxe6 Rxe6 h5 h4 Rd8 Re7 g6 Be3 Ba5 Kf2 Rd6 Rc1 Bd8 Rg7 Be4 Rg8 Kd7 c5 Rd3 Rc4 Bd5 Rg7+ Ke6 Rd4 Rxd4 Bxd4 Kf5 Rd7 Bc6 Rxd8 Kxf4 Bxf6 == Problem 5 == FEN: r2qrb1k/1p1b2p1/p2ppn1p/8/3NP3/1BN5/PPP3QP/1K3RR1 w - - 0 1 21.e5!! dxe5 22.Ne4! Nh5 23.Qg6!? (stronger is 23.Qg4!! Nf4 24.Nf3 Qc7 25.Nh4 ± ) 23...exd4? (23...Nf4 24.Rxf4! exf4 25.Nf3! Qb6 26.Rg5!! covering b5 and threatening Nf6 or Ne5-f7+) 24.Ng5 1−0 Stockfish 8 64bit 3CPU running on 2016 hardware recognises the significance of 21.e5 in 5 seconds. Stockfish 12 dev (Stockfish_20062212_x64_modern) 64bit 1CPU running on 2016 hardware recognizes the significance of 21.e5 in 11 seconds. 25/42 00:06 7 963k 1309k +6,93 e5 Nh5 Ne4 dxe5 Nf3 Nf4 Qg4 Qc7 Nh4 Bc6 Nf6 g5 Rxf4 exf4 Qh5 Qe7 Ng6+ Kg7 Nxe7 Rxe7 Ng4 37/62 03:12 298 083k 1545k +10,70 e5 Ng4 Qxg4 Qg5 Qh3 Qxe5 Nde2 g5 Rxf8+ Kg7 Rff1 Rf8 Re1 Qf5 Qg3 Rad8 Nd4 Qf4 Nxe6+ Bxe6 Rxe6 Qxg3 == Problem 6 == FEN: rnbqk2r/1p3ppp/p7/1NpPp3/QPP1P1n1/P4N2/4KbPP/R1B2B1R b kq - 0 1 13... axb5!! offers an exchange to keep the white queen out of play. 14.Qxa8 Bd4 15.Nxd4 cxd4 16.Qxb8 0-0! 17.Ke1 Qh4 18.g3 Qf6 19.Bf4 g5? (Ivanchuk found 19...d3! during post-game analysis.) 20.Rc1 exf4 21.Qxf4 Qd4 22.Rd1 bxc4 23.e5 Qc3+ 24.Rd2 Re8 25.Bxd3 cxd3 −+ Tasc R30 finds 19... d3! in 2 1/2 hours. 19... Bf5!! is even stronger than 19... d3. Position is already lost at 19... d3 +8.00 for black, ... Bf5 not much better Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of axb5!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/28 00:01 9264k 4714k -1,22 axb5 Qxa8 Bd4 Nxd4 cxd4 h3 Nf6 Bg5 0-0 cxb5 h6 Bxf6 Qxf6 Re1 Nd7 Kd1 Qg6 Qa4 Qg3 Qc2 Qxa3 Bd3 Qxb4 Qb1 46/67 1:05:00 18113493k 4644k -2,40 axb5 Qxa8 Bd4 h3 Nf6 Nxd4 exd4 Kf2 Nxe4+ Kg1 Nd7 Bg5 Qxg5 Qxc8+ Ke7 Qc7 Qe5 d6+ Qxd6 Qxd6+ Kxd6 bxc5+ Ndxc5 cxb5 d3 h4 d2 Rh3 Ke5 Be2 f5 Ra2 Rd8 Bd1 Rd4 Re3 f4 Re2 b6 a4 Kd6 Rc2 Kd5 Ra2 h6 Rb2 Nxa4 Bxa4 Rxa4 Rexd2+ Nxd2 Rxd2+ Kc4 Rd7 g6 == Problem 7 == FEN 1r1bk2r/2R2ppp/p3p3/1b2P2q/4QP2/4N3/1B4PP/3R2K1 w k - 0 1 1.Rxd8+!! Rxd8 (1...Kxd8 2.Ra7! Qe2 3.Qd4+ Ke8 4.h3 Qe1+ 5.Kh2 Rd8 6.Qc5 Qh4 7.Ba3 Rd7 8.Ra8+ Rd8 9.g3 1−0)

  Read more →
• 

  Single-source publishing

  Single-source publishing, also known as single-sourcing publishing, is a content management method which allows the same source content to be used across different forms of media and more than one time. The labor-intensive and expensive work of editing need only be carried out once, on only one document; that source document (the single source of truth) can then be stored in one place and reused. This reduces the potential for error, as corrections are only made one time in the source document. The benefits of single-source publishing primarily relate to the editor rather than the user. The user benefits from the consistency that single-sourcing brings to terminology and information. This assumes the content manager has applied an organized conceptualization to the underlying content (A poor conceptualization can make single-source publishing less useful). Single-source publishing is sometimes used synonymously with multi-channel publishing though whether or not the two terms are synonymous is a matter of discussion. == Definition == While there is a general definition of single-source publishing, there is no single official delineation between single-source publishing and multi-channel publishing, nor are there any official governing bodies to provide such a delineation. Single-source publishing is most often understood as the creation of one source document in an authoring tool and converting that document into different file formats or human languages (or both) multiple times with minimal effort. Multi-channel publishing can either be seen as synonymous with single-source publishing, or similar in that there is one source document but the process itself results in more than a mere reproduction of that source. == History == The origins of single-source publishing lie, indirectly, with the release of Windows 3.0 in 1990. With the eclipsing of MS-DOS by graphical user interfaces, help files went from being unreadable text along the bottom of the screen to hypertext systems such as WinHelp. On-screen help interfaces allowed software companies to cease the printing of large, expensive help manuals with their products, reducing costs for both producer and consumer. This system raised opportunities as well, and many developers fundamentally changed the way they thought about publishing. Writers of software documentation did not simply move from being writers of traditional bound books to writers of electronic publishing, but rather they became authors of central documents which could be reused multiple times across multiple formats. The first single-source publishing project was started in 1993 by Cornelia Hofmann at Schneider Electric in Seligenstadt, using software based on Interleaf to automatically create paper documentation in multiple languages based on a single original source file. XML, developed during the mid- to late-1990s, was also significant to the development of single-source publishing as a method. XML, a markup language, allows developers to separate their documentation into two layers: a shell-like layer based on presentation and a core-like layer based on the actual written content. This method allows developers to write the content only one time while switching it in and out of multiple different formats and delivery methods. In the mid-1990s, several firms began creating and using single-source content for technical documentation (Boeing Helicopter, Sikorsky Aviation and Pratt & Whitney Canada) and user manuals (Ford owners manuals) based on tagged SGML and XML content generated using the Arbortext Epic editor with add-on functions developed by a contractor. The concept behind this usage was that complex, hierarchical content that did not lend itself to discrete componentization could be used across a variety of requirements by tagging the differences within a single document using the capabilities built into SGML and XML. Ford, for example, was able to tag its single owner's manual files so that 12 model years could be generated via a resolution script running on the single completed file. Pratt & Whitney, likewise, was able to tag up to 20 subsets of its jet engine manuals in single-source files, calling out the desired version at publication time. World Book Encyclopedia also used the concept to tag its articles for American and British versions of English. Starting from the early 2000s, single-source publishing was used with an increasing frequency in the field of technical translation. It is still regarded as the most efficient method of publishing the same material in different languages. Once a printed manual was translated, for example, the online help for the software program which the manual accompanies could be automatically generated using the method. Metadata could be created for an entire manual and individual pages or files could then be translated from that metadata with only one step, removing the need to recreate information or even database structures. Although single-source publishing is now decades old, its importance has increased urgently as of the 2010s. As consumption of information products rises and the number of target audiences expands, so does the work of developers and content creators. Within the industry of software and its documentation, there is a perception that the choice is to embrace single-source publishing or render one's operations obsolete. == Criticism == Editors using single-source publishing have been criticized for below-standard work quality, leading some critics to describe single-source publishing as the "conveyor belt assembly" of content creation. While heavily used in technical translation, there are risks of error in regard to indexing. While two words might be synonyms in English, they may not be synonyms in another language. In a document produced via single-sourcing, the index will be translated automatically and the two words will be rendered as synonyms. This is because they are synonyms in the source language, while in the target language they are not.

  Read more →
• 

  Master data management

  Master data management (MDM) is a discipline in which business and information technology collaborate to ensure the uniformity, accuracy, stewardship, semantic consistency, and accountability of the enterprise's official shared master data assets. == Reasons for master data management == Data consistency and accuracy: MDM ensures that the organization's critical data is consistent and accurate across all systems, reducing discrepancies and errors caused by multiple, siloed copies of the same data. Improved decision-making: By providing a single version of the truth (SVOT), MDM enables organizations to deliver the right data to decision makers, allowing them to clearly understand business performance and make informed, data-driven decisions. Operational efficiency: With the consistent and accurate data provided by an MDM, operational processes such as reporting and inventory management can be automated to improve efficiency. Employee learning, onboarding, and customer service also become more efficient, as MDM data facilitates rapid, accurate, and thorough information retrieval, permitting more employee time to be spent on work. Regulatory compliance: MDM tries to help organizations comply with industry standards and regulations by ensuring that master data is accurately recorded, maintained, and audited. However, issues with data quality, classification, and reconciliation may require data transformation. As with other Extract, Transform, Load-based data movements, these processes are expensive and inefficient, reducing return on investment for a project. == Business unit and product line segmentation == As a result of business unit and product line segmentation, the same entity (whether a customer, supplier, or product) will be included in different product lines. This leads to data redundancy and even confusion. For example, a customer takes out a mortgage at a bank. If the marketing and customer service departments have separate databases, advertisements might still be sent to the customer, even though they've already signed up. The two parts of the bank are unaware, and the customer is sent irrelevant communications. Record linkage can associate different records corresponding to the same entity, mitigating this issue. == Mergers and acquisitions == One of the most common problems for master data management is company growth through mergers or acquisitions. Reconciling these separate master data systems can present difficulties, as existing applications have dependencies on the master databases. Ideally, database administrators resolve this problem through deduplication of the master data as part of the merger. Over time, as further mergers and acquisitions occur, the problem can multiply. Data reconciliation processes can become extremely complex or even unreliable. Some organizations end up with 10, 15, or even 100 separate and poorly integrated master databases. This can cause serious problems in customer satisfaction, operational efficiency, decision support, and regulatory compliance. Another problem involves determining the proper degrees of detail and normalization to include in the master data schema. For example, in a federated Human Resources environment, the enterprise software may focus on storing people's data as current status, adding a few fields to identify the date of hire, date of last promotion, etc. However, this simplification can introduce business-impacting errors into dependent systems for planning and forecasting. The stakeholders of such systems may be forced to build a parallel network of new interfaces to track the onboarding of new hires, planned retirements, and divestment, which works against one of the aims of master data management. == People, processes and technology == Master data management is enabled by technology, but is more than the technologies that enable it. An organization's master data management capability will also include people and processes in its definition. === People === Several roles should be staffed within MDM. Most prominently, the Data Owner and the Data Steward. Several people would likely be allocated to each role and each person responsible for a subset of Master Data (e.g. one data owner for employee master data, another for customer master data). The Data Owner is responsible for the requirements for data definition, data quality, data security, etc. as well as for compliance with data governance and data management procedures. The Data Owner should also be funding improvement projects in case of deviations from the requirements. The Data Steward is running the master data management on behalf of the data owner and probably also being an advisor to the Data Owner. === Processes === Master data management can be viewed as a "discipline for specialized quality improvement" defined by the policies and procedures put in place by a data governance organization. It has the objective of providing processes for collecting, aggregating, matching, consolidating, quality-assuring, persisting and distributing master data throughout an organization to ensure a common understanding, consistency, accuracy and control, in the ongoing maintenance and application use of that data. Processes commonly seen in master data management include source identification, data collection, data transformation, normalization, rule administration, error detection and correction, data consolidation, data storage, data distribution, data classification, taxonomy services, item master creation, schema mapping, product codification, data enrichment, hierarchy management, business semantics management and data governance. === Technology === A master data management tool can be used to support master data management by removing duplicates, standardizing data (mass maintaining), and incorporating rules to eliminate incorrect data from entering the system to create an authoritative source of master data. Master data are the products, accounts, and parties for which the business transactions are completed. Where the technology approach produces a "golden record" or relies on a "source of record" or "system of record", it is common to talk of where the data is "mastered". This is accepted terminology in the information technology industry, but care should be taken, both with specialists and with the wider stakeholder community, to avoid confusing the concept of "master data" with that of "mastering data". ==== Implementation models ==== There are several models for implementing a technology solution for master data management. These depend on an organization's core business, its corporate structure, and its goals. These include: Source of record Registry Consolidation Coexistence Transaction/centralized ===== Source of record ===== This model identifies a single application, database, or simpler source (e.g. a spreadsheet) as being the "source of record" (or "system of record" where solely application databases are relied on). The benefit of this model is its conceptual simplicity, but it may not fit with the realities of complex master data distribution in large organizations. The source of record can be federated, for example by groups of attributes (so that different attributes of a master data entity may have different sources of record) or geographically (so that different parts of an organization may have different master sources). Federation is only applicable in certain use cases, where there is a clear delineation of which subsets of records will be found in which sources. The source of record model can be applied more widely than simply to master data, for example to reference data. ==== Transmission of master data ==== There are several ways in which master data may be collated and distributed to other systems. This includes: Data consolidation – The process of capturing master data from multiple sources and integrating it into a single hub (operational data store) for replication to other destination systems. Data federation – The process of providing a single virtual view of master data from one or more sources to one or more destination systems. Data propagation – The process of copying master data from one system to another, typically through point-to-point interfaces in legacy systems. == Change management in implementation == Challenges in adopting master data management within large organizations often arise when stakeholders disagree on a "single version of the truth" concept is not affirmed by stakeholders, who believe that their local definition of the master data is necessary. For example, the product hierarchy used to manage inventory may be entirely different from the product hierarchies used to support marketing efforts or pay sales representatives. It is above all necessary to identify if different master data is genuinely required. If it is required, then the solution implemented (technology and process) must be able to allow multiple versions of the truth to exist but will prov

  Read more →
• 

  Sardinas–Patterson algorithm

  In coding theory, the Sardinas–Patterson algorithm is a classical algorithm for determining in polynomial time whether a given variable-length code is uniquely decodable, named after August Albert Sardinas and George W. Patterson, who published it in 1953. The algorithm carries out a systematic search for a string which admits two different decompositions into codewords. As Knuth reports, the algorithm was rediscovered about ten years later in 1963 by Floyd, despite the fact that it was at the time already well known in coding theory. == Idea of the algorithm == Consider the code { a ↦ 1 , b ↦ 011 , c ↦ 01110 , d ↦ 1110 , e ↦ 10011 } {\displaystyle \{\,{\texttt {a}}\mapsto {\texttt {1}},{\texttt {b}}\mapsto {\texttt {011}},{\texttt {c}}\mapsto {\texttt {01110}},{\texttt {d}}\mapsto {\texttt {1110}},{\texttt {e}}\mapsto {\texttt {10011}}\,\}} . This code, which is based on an example by Berstel, is an example of a code which is not uniquely decodable, since the string 011101110011 can be interpreted as the sequence of codewords 01110 – 1110 – 011, but also as the sequence of codewords 011 – 1 – 011 – 10011. Two possible decodings of this encoded string are thus given by cdb and babe. In general, a codeword can be found by the following idea: In the first round, we choose two codewords x 1 {\displaystyle x_{1}} and y 1 {\displaystyle y_{1}} such that x 1 {\displaystyle x_{1}} is a prefix of y 1 {\displaystyle y_{1}} , that is, x 1 w = y 1 {\displaystyle x_{1}w=y_{1}} for some "dangling suffix" w {\displaystyle w} . If one tries first x 1 = 011 {\displaystyle x_{1}={\texttt {011}}} and y 1 = 01110 {\displaystyle y_{1}={\texttt {01110}}} , the dangling suffix is w = 10 {\displaystyle {\texttt {w}}={\texttt {10}}} . If we manage to find two sequences x 2 , … , x p {\displaystyle x_{2},\ldots ,x_{p}} and y 2 , … , y q {\displaystyle y_{2},\ldots ,y_{q}} of codewords such that x 2 ⋯ x p = w y 2 ⋯ y q {\displaystyle x_{2}\cdots x_{p}=wy_{2}\cdots y_{q}} , then we are finished: For then the string x = x 1 x 2 ⋯ x p {\displaystyle x=x_{1}x_{2}\cdots x_{p}} can alternatively be decomposed as y 1 y 2 ⋯ y q {\displaystyle y_{1}y_{2}\cdots y_{q}} , and we have found the desired string having at least two different decompositions into codewords. In the second round, we try out two different approaches: the first trial is to look for a codeword that has w as prefix. Then we obtain a new dangling suffix w, with which we can continue our search. If we eventually encounter a dangling suffix that is itself a codeword (or the empty word), then the search will terminate, as we know there exists a string with two decompositions. The second trial is to seek for a codeword that is itself a prefix of w. In our example, we have w = 10 {\displaystyle w={\texttt {10}}} , and the sequence 1 is a codeword. We can thus also continue with w = 0 {\displaystyle w={\texttt {0}}} as the new dangling suffix. == Precise description of the algorithm == The algorithm is described most conveniently using quotients of formal languages. In general, for two sets of strings D and N, the (left) quotient N − 1 D {\displaystyle N^{-1}D} is defined as the residual words obtained from D by removing some prefix in N. Formally, N − 1 D = { y ∣ x y ∈ D and x ∈ N } {\displaystyle N^{-1}D=\{\,y\mid xy\in D~{\textrm {and}}~x\in N\,\}} . Now let C {\displaystyle C} denote the (finite) set of codewords in the given code. The algorithm proceeds in rounds, where we maintain in each round not only one dangling suffix as described above, but the (finite) set of all potential dangling suffixes. Starting with round i = 1 {\displaystyle i=1} , the set of potential dangling suffixes will be denoted by S i {\displaystyle S_{i}} . The sets S i {\displaystyle S_{i}} are defined inductively as follows: S 1 = C − 1 C ∖ { ε } {\displaystyle S_{1}=C^{-1}C\setminus \{\varepsilon \}} . Here, the symbol ε {\displaystyle \varepsilon } denotes the empty word. S i + 1 = C − 1 S i ∪ S i − 1 C {\displaystyle S_{i+1}=C^{-1}S_{i}\cup S_{i}^{-1}C} , for all i ≥ 1 {\displaystyle i\geq 1} . The algorithm computes the sets S i {\displaystyle S_{i}} in increasing order of i {\displaystyle i} . As soon as one of the S i {\displaystyle S_{i}} contains a word from C or the empty word, then the algorithm terminates and answers that the given code is not uniquely decodable. Otherwise, once a set S i {\displaystyle S_{i}} equals a previously encountered set S j {\displaystyle S_{j}} with j < i {\displaystyle j Read more →

• 

  Model compression

  Model compression is a machine learning technique for reducing the size of trained models. Large models can achieve high accuracy, but often at the cost of significant resource requirements. Compression techniques aim to compress models without significant performance reduction. Smaller models require less storage space, and consume less memory and compute during inference. Compressed models enable deployment on resource-constrained devices such as smartphones, embedded systems, edge computing devices, and consumer electronics computers. Efficient inference is also valuable for large corporations that serve large model inference over an API, allowing them to reduce computational costs and improve response times for users. Model compression is not to be confused with knowledge distillation, in which a smaller "student" model is trained to imitate the input-output behavior of a larger "teacher" model (as opposed to using the "teacher"'s trained parameters or the "teacher"'s training targets). == Techniques == Several techniques are employed for model compression. === Pruning === Pruning sparsifies a large model by setting some parameters to exactly zero. This effectively reduces the number of parameters. This allows the use of sparse matrix operations, which are faster than dense matrix operations. Pruning criteria can be based on magnitudes of parameters, the statistical pattern of neural activations, Hessian values, etc. === Quantization === Quantization reduces the numerical precision of weights and activations. For example, instead of storing weights as 32-bit floating-point numbers, they can be represented using 8-bit integers. Low-precision parameters take up less space, and takes less compute to perform arithmetic with. It is also possible to quantize some parameters more aggressively than others, so for example, a less important parameter can have 8-bit precision while another, more important parameter, can have 16-bit precision. Inference with such models requires mixed-precision arithmetic. Quantized models can also be used during training (rather than after training). PyTorch implements automatic mixed-precision (AMP), which performs autocasting, gradient scaling, and loss scaling. === Low-rank factorization === Weight matrices can be approximated by low-rank matrices. Let W {\displaystyle W} be a weight matrix of shape m × n {\displaystyle m\times n} . A low-rank approximation is W ≈ U V T {\displaystyle W\approx UV^{T}} , where U {\displaystyle U} and V {\displaystyle V} are matrices of shapes m × k , n × k {\displaystyle m\times k,n\times k} . When k {\displaystyle k} is small, this both reduces the number of parameters needed to represent W {\displaystyle W} approximately, and accelerates matrix multiplication by W {\displaystyle W} . Low-rank approximations can be found by singular value decomposition (SVD). The choice of rank for each weight matrix is a hyperparameter, and jointly optimized as a mixed discrete-continuous optimization problem. The rank of weight matrices may also be pruned after training, taking into account the effect of activation functions like ReLU on the implicit rank of the weight matrices. == Training == Model compression may be decoupled from training, that is, a model is first trained without regard for how it might be compressed, then it is compressed. However, it may also be combined with training. The "train big, then compress" method trains a large model for a small number of training steps (less than it would be if it were trained to convergence), then heavily compress the model. It is found that at the same compute budget, this method results in a better model than lightly compressed, small models. In Deep Compression, the compression has three steps. First loop (pruning): prune all weights lower than a threshold, then finetune the network, then prune again, etc. Second loop (quantization): cluster weights, then enforce weight sharing among all weights in each cluster, then finetune the network, then cluster again, etc. Third step: Use Huffman coding to losslessly compress the model. The SqueezeNet paper reported that Deep Compression achieved a compression ratio of 35 on AlexNet, and a ratio of ~10 on SqueezeNets.

  Read more →
• 

  Taxonomic database

  A taxonomic database is a database created to hold information on biological taxa – for example groups of organisms organized by species name or other taxonomic identifier – for efficient data management and information retrieval. Taxonomic databases are routinely used for the automated construction of biological checklists such as floras and faunas, both for print publication and online; to underpin the operation of web-based species information systems; as a part of biological collection management (for example in museums and herbaria); as well as providing, in some cases, the taxon management component of broader science or biology information systems. They are also a fundamental contribution to the discipline of biodiversity informatics. == Goals == Taxonomic databases digitize scientific biodiversity data and provide access to taxonomic data for research. Taxonomic databases vary in breadth of the groups of taxa and geographical space they seek to include, for example: beetles in a defined region, mammals globally, or all described taxa in the tree of life. A taxonomic database may incorporate organism identifiers (scientific name, author, and – for zoological taxa – year of original publication), synonyms, taxonomic opinions, literature sources or citations, illustrations or photographs, and biological attributes for each taxon (such as geographic distribution, ecology, descriptive information, threatened or vulnerable status, etc.). Some databases, such as the Global Biodiversity Information Facility(GBIF) database and the Barcode of Life Data System, store the DNA barcode of a taxon if one exists (also called the Barcode Index Number (BIN) which may be assigned, for example, by the International Barcode of Life project (iBOL) or UNITE, a database for fungal DNA barcoding). A taxonomic database aims to accurately model the characteristics of interest that are relevant to the organisms which are in scope for the intended coverage and usage of the system. For example, databases of fungi, algae, bryophytes and vascular plants ("higher plants") encode conventions from the International Code of Botanical Nomenclature while their counterparts for animals and most protists encode equivalent rules from the International Code of Zoological Nomenclature. Modelling the relevant taxonomic hierarchy for any taxon is a natural fit with the relational model employed in almost all database systems. Scientific consensus is not reached for all taxon groups, and new species continue to be described; therefore, another goal of taxonomic databases is to aid in resolving conflicts of scientific opinion and unify taxonomy. == History == Possibly the earliest documented management of taxonomic information in computerised form comprised the taxonomic coding system developed by Richard Swartz et al. at the Virginia Institute of Marine Science for the Biota of Chesapeake Bay and described in a published report in 1972. This work led directly or indirectly to other projects with greater profile including the NODC Taxonomic Code system which went through 8 versions before being discontinued in 1996, to be subsumed and transformed into the still current Integrated Taxonomic Information System (ITIS). A number of other taxonomic databases specializing in particular groups of organisms that appeared in the 1970s through to the present jointly contribute to the Species 2000 project, which since 2001 has been partnering with ITIS to produce a combined product, the Catalogue of Life. While the Catalogue of Life currently concentrates on assembling basic name information as a global species checklist, numerous other taxonomic database projects such as Fauna Europaea, the Australian Faunal Directory, and more supply rich ancillary information including descriptions, illustrations, maps, and more. Many taxonomic database projects are currently listed at the TDWG "Biodiversity Information Projects of the World" site. == Issues == The representation of taxonomic information in machine-encodable form raises a number of issues not encountered in other domains, such as variant ways to cite the same species or other taxon name, the same name used for multiple taxa (homonyms), multiple non-current names for the same taxon (synonyms), changes in name and taxon concept definition through time, and more. Non-standardized categories and metadata in taxonomic databases hampers the ability for researchers to analyze the data. One forum that has promoted discussion and possible solutions to these and related problems since 1985 is the Biodiversity Information Standards (TDWG), originally called the Taxonomic Database Working Group. While online databases have great benefits (for example, increased access to taxonomic information), they also have issues such as data integrity risks due to on- and off-line versions and continuous updates, technical access issues due to server or internet outage, and differing capacities for complex queries to extract taxonomic data into lists. As the quantity of information in online taxonomic databases rapidly expands, data aggregation, and the integration and alignment of non-standardized data across databases, is a big challenge in taxonomy and biodiversity informatics.

  Read more →
• 

  PL/Perl

  PL/Perl (Procedural Language/Perl) is a procedural language supported by the PostgreSQL RDBMS. PL/Perl, as an imperative programming language, allows more control than the relational algebra of SQL. Programs created in the PL/Perl language are called functions and can use most of the features that the Perl programming language provides, including common flow control structures and syntax that has incorporated regular expressions directly. These functions can be evaluated as part of a SQL statement, or in response to a trigger or rule. The design goals of PL/Perl were to create a loadable procedural language that: can be used to create functions and trigger procedures, adds control structures to the SQL language, can perform complex computations, can be defined to be either trusted or untrusted by the server, is easy to use. PL/Perl is one of many "PL" languages available for PostgreSQL PL/pgSQL PL/Java, plPHP, PL/Python, PL/R, PL/Ruby, PL/sh, and PL/Tcl.

  Read more →
• 

  Gutmann method

  The Gutmann method is an algorithm for securely erasing the contents of computer hard disk drives, such as files. Devised by Peter Gutmann and Colin Plumb and presented in the paper Secure Deletion of Data from Magnetic and Solid-State Memory in July 1996, it involved writing a series of 35 patterns over the region to be erased. The selection of patterns assumes that the user does not know the encoding mechanism used by the drive, so it includes patterns designed specifically for three types of drives. A user who knows which type of encoding the drive uses can choose only those patterns intended for their drive. A drive with a different encoding mechanism would need different patterns. Most of the patterns in the Gutmann method were designed for older MFM/RLL-encoded disks. Gutmann himself has noted that more modern drives no longer use these older encoding techniques, making parts of the method irrelevant. He said "In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques". Since about 2001, some ATA IDE and SATA hard drive manufacturer designs include support for the ATA Secure Erase standard, obviating the need to apply the Gutmann method when erasing an entire drive. The Gutmann method does not apply to USB sticks: a 2011 study reports that 71.7% of data remained available. On solid state drives it resulted in 0.8–4.3% recovery. == Background == The delete function in most operating systems simply marks the space occupied by the file as reusable (removes the pointer to the file) without immediately removing any of its contents. At this point the file can be fairly easily recovered by numerous recovery applications. However, once the space is overwritten with other data, there is no known way to use software to recover it. It cannot be done with software alone since the storage device only returns its current contents via its normal interface. Gutmann claims that intelligence agencies have sophisticated tools, including magnetic force microscopes, which together with image analysis, can detect the previous values of bits on the affected area of the media (for example hard disk). This claim however seems to be invalid based on the thesis "Data Reconstruction from a Hard Disk Drive using Magnetic Force Microscopy". == Method == An overwrite session consists of a lead-in of four random write patterns, followed by patterns 5 to 31 (see rows of table below), executed in a random order, and a lead-out of four more random patterns. Each of patterns 5 to 31 was designed with a specific magnetic media encoding scheme in mind, which each pattern targets. The drive is written to for all the passes even though the table below only shows the bit patterns for the passes that are specifically targeted at each encoding scheme. The result should obscure any data on the drive so that only the most advanced physical scanning (e.g., using a magnetic force microscope) of the drive is likely to be able to recover any data. The series of patterns is as follows: Encoded bits shown in bold are what should be present in the ideal pattern, although due to the encoding the complementary bit is actually present at the start of the track. == Criticism == Daniel Feenberg of the National Bureau of Economic Research, an American private nonprofit research organization, criticized Gutmann's claim that intelligence agencies are likely to be able to read overwritten data, citing a lack of evidence for such claims. He finds that Gutmann cites one non-existent source and sources that do not actually demonstrate recovery, only partially-successful observations. The definition of "random" is also quite different from the usual one used: Gutmann expects the use of pseudorandom data with sequences known to the recovering side, not an unpredictable one such as a cryptographically secure pseudorandom number generator. Nevertheless, some published government security procedures consider an overwritten disk to still be sensitive. Human factors and potential limitations in the overwriting software create a residual risk that is not considered acceptable at the highest security levels. Gutmann himself has responded to some of these criticisms and also criticized how his algorithm has been abused in an epilogue to his original paper, in which he states: In the time since this paper was published, some people have treated the 35-pass overwrite technique described in it more as a kind of voodoo incantation to banish evil spirits than the result of a technical analysis of drive encoding techniques. As a result, they advocate applying the voodoo to PRML and EPRML drives even though it will have no more effect than a simple scrubbing with random data. In fact performing the full 35-pass overwrite is pointless for any drive since it targets a blend of scenarios involving all types of (normally-used) encoding technology, which covers everything back to 30+-year-old MFM methods (if you don't understand that statement, re-read the paper). If you're using a drive which uses encoding technology X, you only need to perform the passes specific to X, and you never need to perform all 35 passes. For any modern PRML/EPRML drive, a few passes of random scrubbing is the best you can do. As the paper says, "A good scrubbing with random data will do about as well as can be expected". This was true in 1996, and is still true now. Gutmann's statement has been criticized for not recognizing that PRML/EPRML does not replace RLL, with critics claiming PRML/EPRML to be a signal detection method rather than a data encoding method. Polish data recovery service Kaleron has also claimed that Gutmann's publication contains further factual errors and assumptions that do not apply to actual disks.

  Read more →
• 

  Database dump

  A database dump contains a record of the table structure and/or the data from a database and is usually in the form of a list of SQL statements ("SQL dump"). A database dump is most often used for backing up a database so that its contents can be restored in the event of data loss. Corrupted databases can often be recovered by analysis of the dump. Database dumps are often published by free content projects, to facilitate reuse, forking, offline use, and long-term digital preservation. Dumps can be transported into environments with Internet blackouts or otherwise restricted Internet access, as well as facilitate local searching of the database using sophisticated tools such as grep.

  Read more →
• 

  Organizational information theory

  Organizational Information Theory (OIT) is a communication theory, developed by Karl Weick, offering systemic insight into the processing and exchange of information within organizations and among its members. Unlike the past structure-centered theory, OIT focuses on the process of organizing in dynamic, information-rich environments. Given that, it contends that the main activity of organizations is the process of making sense of equivocal information. Organizational members are instrumental to reduce equivocality and achieve sensemaking through some strategies — enactment, selection, and retention of information. With a framework that is interdisciplinary in nature, organizational information theory's desire to eliminate both ambiguity and complexity from workplace messaging builds upon earlier findings from general systems theory and phenomenology. == Inspiration and influence of pre-existing theories == 1. General Systems Theory The General Systems Theory, on its most basic premise, describes the phenomenon of a cohesive group of interrelated parts. When one part of the system is changed or affected, it will affect the system as a whole. Weick uses this theoretical framework from 1950 to influence his organizational information theory. Likewise, organizations can be viewed as a system of related parts that work together towards a common goal or vision. Applying this to Weick's organizational information theory, organizations must work to reduce ambiguity and complexity in the workplace to maximize cohesiveness and efficiency. Weick uses the term, coupling, to describe how organizations, like a system, can be composed of interrelated and dependent parts. Coupling looks at the relationship between people and work. There are two types of coupling: 1. Loose coupling Loose coupling describes that while people within the organization or system are connected and often work together, they do not depend on one another to continue or fully complete individual work. The dependencies are weak and workflow is flexible. For example, "if the whole Science department completely shuts down because all of teachers are sick or for whatsoever reason, the school can still continue to operate because other departments are still present." 2. Tight coupling Tight coupling describes when connections within an organization are strong and dependent. If one part of the organization is not operating correctly, the organization as a whole cannot continue to their fullest potential. " For instance, the format and ink section completely shuts down hence the succeeding steps cannot be continued, so the whole process of the organization will be dropped. Thus, components of a system are directly dependent on one another." 2. Theory of evolution The theory of evolution, by Charles Darwin, is a framework for survival of the fittest. According to Darwin, organisms attempt to adapt and live in an unforgiving environment. Those that are unsuccessful in adaptation do not survive, while the strong organisms continue to thrive and reproduce. Weick invokes inspiration from Darwin, to incorporate a biological perspective to his theory. It is natural for organizations to have to adapt to incoming information that often interfere with the preexisting environment. Organizations that are able to plan and alter strategies in accordance with their constant need of organizing and sense making, will survive and be the most successful. However, there is a notable difference between animal evolution and survival of the fittest in organizations, "A given animal is what it is; variation comes through mutation. But the nature of an organization can change when its members alter their behavior." == Assumptions == 1. Human organizations exist in an information environment Unlike senders and receivers models, OIT stands on the situational perspective. Karl Weick views a human organization as an open social system. People in that system develop a mechanism to establish goals, obtain and process information, or perceive the environment. In this process, people and the environment come to conclusions on "what's going on here?". Colville believes that this attributional process is retrospective. Take an education institution as an example. A university can obtain information regarding students' needs in numerous ways. It might create feedback section in its website. It could organize alumni panels or academic affairs to attract prospective students and collect concrete questions they are interested in. It may also conduct the survey or host focus group to get the information. After that, the staff of the university have to decide how to deal with these information, based on which, it has to set and accomplish its goals for current and prospective students. 2. The information an organization receives differs in terms of equivocality Weick posits that numerous feasible interpretations of reality exist when organizations process information. Their varying levels of understandability lead to different outcomes of information inputs. In other academic works, scholars tend to say that messages are uncertain or ambiguous. While according to OIT, messages are described to be equivocal. believes that people proactively exclude a number of possibilities to perceive what is going on in the environment. Due to OIT's situational perspective, the meanings of messages consist of the messages, the interpretations of receivers, and the interactional context. However, ambiguity and uncertainty can mean that a standard answer - the only one true objective interpretation - exists. Also, Weick emphasizes that "the equivocality is the engine that motivates people to organize". Maitlis and Christianson states that the equivocality trigger sensemaking for three reasons: environment jolts and organizational crises, threats to identity, and planned change interventions. 3. Human organizations engage in information processing to reduce equivocality of information Based upon the first two assumption, OIT proposes that information processing within organizations is a social activity. Sharing is the key feature of organizational information processing. In that particular context, members jointly make sense the reality by reducing equivocality. It other words, the sensemaking is a joint responsibility which includes numerous interdependent people to accomplish. In this process, organizations and its members combine actions and attributions together in order to find the balance between the complexity of thoughts and the simplicity of actions. Weick also proposes that people create their own environment though enactment, which is the action of making sense. This is because people have different perceptual schemas and selective perception, so people create different information environments. In creating different information environments, people can arrive at the same or close to the same understanding or solution through different thought processes and overall understanding. == Key concepts == === The organization === In order to place Weick's vision regarding Organizational Information Theory into proper working context, exploring his view regarding what constitutes the organization and how its individuals embody that construct might yield significant insights. From a fundamental standpoint, he shared a belief that organizational validation is derived---not through bricks and mortar, or locale—but from a series of events which enable entities to "collect, manage and use the information they receive." In elaborating further on what constitutes an organization during early writings outlining OIT, Weick said, "The word organization is a noun and it is also a myth. if one looks for an organization, one will not find it. What will be found is that there are events linked together, that transpire within concrete walls and these sequences, their pathways, their timing, are the forms we erroneously make into substances when we talk about an organization". When viewed in this modular fashion, the organization meets Weick's theoretical vision by encompassing parameters that are less bound by concrete, wood, and structural restraints and more by an ability to serve as a repository where information can be consistently and effectively channeled. Taking these defining characteristics into account, proper channel execution relies on maximization of messaging clarity, context, delivery and evolution through any system. One example as to how these interactions might unfold on a more granular level within these confines can be gleaned through Weick's double interact loop, which he considers the "building blocks of every organization". Simply put, double interacts describe interpersonal exchanges that, inherently, occur across the organizational chain of command and in life, itself. Thus: "An act occurs when you say something (Can I have a Popsicle?). An interact occurs when you say something and I respond ("No, it will spoil your dinner

  Read more →
• 

  Wearable technology

  Wearable technology is a category of small electronic and mobile devices with wireless communications capability designed to be worn on the human body and are incorporated into gadgets, accessories, or clothes. Common types of wearable technology include smartwatches, fitness trackers, and smartglasses. Wearable electronic devices are often close to or on the surface of the skin, where they detect, analyze, and transmit information such as vital signs, and/or ambient data and which allow in some cases immediate biofeedback to the wearer. Wearable devices collect vast amounts of data from users making use of different behavioral and physiological sensors, which monitor their health status and activity levels. Wrist-worn devices include smartwatches with a touchscreen display, while wristbands are mainly used for fitness tracking but do not contain a touchscreen display. Wearable devices such as activity trackers are an example of the Internet of things, since "things" such as electronics, software, sensors, and connectivity are effectors that enable objects to exchange data (including data quality) through the internet with a manufacturer, operator, and/or other connected devices, without requiring human intervention. Wearable technology offers a wide range of possible uses, from communication and entertainment to improving health and fitness, however, there are worries about privacy and security because wearable devices have the ability to collect personal data. Wearable technology has a variety of use cases which is growing as the technology is developed and the market expands. It can be used to encourage individuals to be more active and improve their lifestyle choices. Healthy behavior is encouraged by tracking activity levels and providing useful feedback to enable goal setting. This can be shared with interested stakeholders such as healthcare providers. Wearables are popular in consumer electronics, most commonly in the form factors of smartwatches, smart rings, and implants. Apart from commercial uses, wearable technology is being incorporated into navigation systems, advanced textiles (e-textiles), and healthcare. As wearable technology is being proposed for use in critical applications, like other technology, it is vetted for its reliability and security properties. == History == In the 1500s, German inventor Peter Henlein (1485–1542) created small watches that were worn as necklaces. A century later, pocket watches grew in popularity as waistcoats became fashionable for men. Wristwatches were created in the late 1600s but were worn mostly by women as bracelets. Pedometers were developed around the same time as pocket watches. The concept of a pedometer was described by Leonardo da Vinci around 1500, and the Germanic National Museum in Nuremberg has a pedometer in its collection from 1590. In the late 1800s, the first wearable hearing aids were introduced. In 1904, aviator Alberto Santos-Dumont pioneered the modern use of the wristwatch. In 1949, American biophysicist Norman Holter invented the very first health monitoring device. His invention, the Holter monitor, was groundbreaking as one of the first wearable devices capable of tracking vital health data outside of a clinical setting. In the 1970s, calculator watches became available, reaching the peak of their popularity in the 1980s. From the early 2000s, wearable cameras were being used as part of a growing sousveillance movement. Expectations, operations, usage and concerns about wearable technology was floated on the first International Conference on Wearable Computing. In 2008, Ilya Fridman incorporated a hidden Bluetooth microphone into a pair of earrings. Big tech companies such as Apple, Samsung, and Fitbit have expanded on this idea by interfacing with smartphones and personal computer software to collect a wide variety of data. Wearable devices include dedicated health monitors, fitness bands, and smartwatches. In 2010, Fitbit released its first step counter. Wearable technology which tracks information such as walking and heart rate is part of the quantified self movement. In 2013, McLear, also known as NFC Ring, released a "smart ring". The smart ring could make bitcoin payments, unlock other devices, and transfer personally identifying information, and also had other features. In 2013, one of the first widely available smartwatches was the Samsung Galaxy Gear. Apple followed in 2015 with the Apple Watch. === Prototypes === From 1991 to 1997, Rosalind Picard and her students, Steve Mann and Jennifer Healey, at the MIT Media Lab designed, built, and demonstrated data collection and decision making from "Smart Clothes" that monitored continuous physiological data from the wearer. These "smart clothes", "smart underwear", "smart shoes", and smart jewellery collected data that related to affective state and contained or controlled physiological sensors and environmental sensors like cameras and other devices. At the same time, also at the MIT Media Lab, Thad Starner and Alex "Sandy" Pentland develop augmented reality. In 1997, their smartglass prototype is featured on 60 Minutes and enables rapid web search and instant messaging. Though the prototype's glasses are nearly as streamlined as modern smartglasses, the processor was a computer worn in a backpack – the most lightweight solution available at the time. In 2009, Sony Ericsson teamed up with the London College of Fashion for a contest to design digital clothing. The winner was a cocktail dress with Bluetooth technology making it light up when a call is received. Zach "Hoeken" Smith of MakerBot fame made keyboard pants during a "Fashion Hacking" workshop at a New York City creative collective. The Tyndall National Institute in Ireland developed a "remote non-intrusive patient monitoring" platform which was used to evaluate the quality of the data generated by the patient sensors and how the end users may adopt to the technology. More recently, London-based fashion company CuteCircuit created costumes for singer Katy Perry featuring LED lighting so that the outfits would change color both during stage shows and appearances on the red carpet such as the dress Katy Perry wore in 2010 at the MET Gala in NYC. In 2012, CuteCircuit created the world's first dress to feature Tweets, as worn by singer Nicole Scherzinger. In 2010, McLear, also known as NFC Ring, developed prototypes of its "smart ring" devices, before a Kickstarter fundraising in 2013. In 2014, graduate students from the Tisch School of Arts in New York designed a hoodie that sent pre-programmed text messages triggered by gesture movements. Around the same time, prototypes for digital eyewear with heads up display (HUD) began to appear. The US military employs headgear with displays for soldiers using a technology called holographic optics. In 2010, Google started developing prototypes of its optical head-mounted display Google Glass, which went into customer beta in March 2013. == Usage == In the consumer space, sales of smart wristbands (aka activity trackers such as the Jawbone UP and Fitbit Flex) started accelerating in 2013. One in five American adults have a wearable device, according to the 2014 PriceWaterhouseCoopers Wearable Future Report. As of 2009, decreasing cost of processing power and other components was facilitating widespread adoption and availability. In professional sports, wearable technology has applications in monitoring and real-time feedback for athletes. Examples of wearable technology in sport include accelerometers, pedometers, and GPS's which can be used to measure an athlete's energy expenditure and movement pattern. In cybersecurity and financial technology, secure wearable devices have captured part of the physical security key market. McLear, also known as NFC Ring, and VivoKey developed products with one-time pass secure access control. In health informatics, wearable devices have enabled better capturing of human health statistics for data driven analysis. This has facilitated data-driven machine learning algorithms to analyse the health condition of users. In business, wearable technology helps managers easily supervise employees by knowing their locations and what they are currently doing. Employees working in a warehouse also have increased safety when working around chemicals or lifting something. Smart helmets are employee safety wearables that have vibration sensors that can alert employees of possible danger in their environment. == Wearable technology and health == Wearable technology is often used to monitor a user's health. Given that such a device is in close contact with the user, it can easily collect data. It started as soon as 1980 where first wireless ECG was invented. In the last decades, there has been substantial growth in research of e.g. textile-based, tattoo, patch, and contact lenses as well as circulation of a notion of "quantified self", transhumanism-related ideas, and growth of life ex

  Read more →