AI Art Zelda

AI Art Zelda — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Product-family engineering

Product-family engineering (PFE), also known as product-line engineering (PLE), is based on the ideas of "domain engineering" created by the Software Engineering Institute, a term coined by James Neighbors in his 1980 dissertation at University of California, Irvine. Software product lines are quite common in our daily lives, but before a product family can be successfully established, an extensive process has to be followed. This process is known as product-family engineering. Product-family engineering can be defined as a method that creates an underlying architecture of an organization's product platform. It provides an architecture that is based on commonality as well as planned variabilities. The various product variants can be derived from the basic product family, which creates the opportunity to reuse and differentiate on products in the family. Product-family engineering is conceptually similar to the widespread use of vehicle platforms in the automotive industry. Product-family engineering is a relatively new approach to the creation of new products, recently evolving to Model-Based Product Line Engineering (MBPLE), emphasizing the centrality of a model-centric approach in PLE. It focuses on the process of engineering new products in such a way that it is possible to reuse product components and apply variability with decreased costs and time. Product-family engineering is all about reusing components and structures as much as possible, according to the ISO/IEC 26550/2015 and the latest ISO/IEC 26580/2021 that introduced the concept of feature-based Product Line Engineering. Several studies have proven that using a product-family engineering approach for product development can have several benefits. Here is a list of some of them: Higher productivity Higher quality Faster time-to-market Lower labor needs The Nokia case mentioned below also illustrates these benefits. In 2025 the publishing of the book Model-Based Product Line Engineering (MBPLE): The feature-based path to product lines success by Marco Forlingieri, Tim Weilkiens and Hugo Guillermo Chalé-Gongora formalized the foundation of the discipline, including best practices and new industrial cases. == Overall process == The product family engineering process consists of several phases. The three main phases are: Phase 1: Product management Phase 2: Domain engineering Phase 3: Product engineering The process has been modeled on a higher abstraction level. This has the advantage that it can be applied to all kinds of product lines and families, not only software. The model can be applied to any product family. Figure 1 (below) shows a model of the entire process. Below, the process is described in detail. The process description contains elaborations of the activities and the important concepts being used. All concepts printed in italic are explained in Table 1. === Phase 1: product management === The first phase is the starting up of the whole process. In this phase some important aspects are defined especially with regard to economic aspects. This phase is responsible for outlining market strategies and defining a scope, which tells what should and should not be inside the product family. ==== Evaluate business visioning ==== During this first activity all context information relevant for defining the scope of the product line is collected and evaluated. It is important to define a clear market strategy and take external market information into account, such as consumer demands. The activity should deliver a context document that contains guidelines, constraints and the product strategy. ==== Define product line scope ==== Scoping techniques are applied to define which aspects are within the scope. This is based upon the previous step in the process, where external factors have been taken into account. The output is a product portfolio description, which includes a list of current and future products and also a product roadmap. It can be argued whether phase 1, product management, is part of the product-family-engineering process, because it could be seen as an individual business process that is more focused on the management aspects instead of the product aspect. However phase 2 needs some important input from this phase, as a large piece of the scope is defined in this phase. So from this point of view it is important to include the product-management phase (phase 1) into the entire process as a base for the domain-engineering process. === Phase 2: domain engineering === During the domain-engineering phases, the variable and common requirements are gathered for the whole product line. The goal is to establish a reusable platform. The output of this phase is a set of common and variable requirements for all products in the product line. ==== Analyze domain requirements ==== This activity includes all activities for analyzing the domain with regard to concept requirements. The requirements are categorized and split up into two new activities. The output is a document with the domain analysis. As can be seen in Figure 1 the process of defining common requirements is a parallel process with defining variable requirements. Both activities take place at the same time. ==== Define common requirements ==== Includes all activities for eliciting and documenting the common requirements of the product line, resulting in a document with reusable common requirements. ==== Define variable requirements ==== Includes all activities for eliciting and documenting the variable requirements of the product line, resulting in a document with variable requirements. ==== Design domain ==== This process step consists of activities for defining the reference architecture of the product line. This generates an abstract structure for all products in the product line. ==== Implement domain ==== During this step a detailed design of the reusable components and the implementation of these components are created. ==== Test domain ==== Validates and verifies the reusability of components. Components are tested against their specifications. After successful testing of all components in different use cases and scenarios, the domain engineering phase has been completed. === Phase 3: product engineering === In the final phase a product X is being engineered. This product X uses the commonalities and variability from the domain engineering phase, so product X is being derived from the platform established in the domain engineering phase. It basically takes all common requirements and similarities from the preceding phase plus its own variable requirements. Using the base from the domain engineering phase and the individual requirements of the product engineering phase a complete and new product can be built. After the product has been fully tested and approved, the product X can be delivered. ==== Define product requirements ==== Developing the product requirements specification for the individual product and reuse the requirements from the preceding phase. ==== Design product ==== All activities for producing the product architecture. Makes use of the reference architecture from the step "design domain", it selects and configures the required parts of the reference architecture and incorporates product specific adaptations. ==== Build product ==== During this process the product is built, using selections and configurations of the reusable components. ==== Test product ==== During this step the product is verified and validated against its specifications. A test report gives information about all tests that were carried out, this gives an overview of possible errors in the product. If the product in the next step is not accepted, the process will loop back to "build product", in Figure 1 this is indicated as "[unsatisfied]". ==== Deliver and support product ==== The final step is the acceptance of the final product. If it has been successfully tested and approved to be complete, it can be delivered. If the product does not satisfy to the specifications, it has to be rebuilt and tested again. The next figure shows the overall process of product-family engineering as described above. It is a full process overview with all concepts attached to the different steps. == Process data diagram == On the left side the entire process from the top to bottom has been drawn. All activities on the left side are linked to the concepts on the right side through dotted lines. Every concept has a number, which reflects the association with other concepts. == List of concepts == Below the list with concepts will be explained. Most concept definitions are extracted from Pohl, Bockle, & Linden (2005) and also some new definitions have been added. Table 1: List of concepts == Example == There are some good examples of the use of product family engineering, which were quite successful. The abstract model of product family engineering allows different kinds of uses, most of them are related to the consumer electronics m
Read more →
AI washing

AI washing is a deceptive marketing tactic that consists of promoting a product or a service by overstating the role of artificial intelligence (AI) and the integration of it. Companies often involve in the practice to mislead customers to boost their offerings, and to secure funding from investors. The practice raises concerns regarding transparency, and legal issues. == Definition == AI washing is a deceptive marketing practice. It involves promoting a product or a service by overstating the role of artificial intelligence (AI) and its integration in the design and manufacture of the same. The practice raises concerns regarding transparency, compliance with security regulations, and consumer trust in the AI industry potentially hampering legitimate advancements in AI. The term was first defined by the AI Now Institute, a research institute based at New York University in 2019. The term is derived from greenwashing, another deceptive marketing technique that misrepresents a product's environmental impact in a similar manner. AI washing might involve a company claiming to have used AI in the development or enhancement of its products or services without its actual involvement, or using buzzwords such as "smart" or "AI-powered" without the product actually offering it or making use of it. A company may overstate the usage of AI or misuse the term, which is also construed as AI washing. In 2026, The Washington Post defined AI washing as "a trend for bosses to blame layoffs on the productive capabilities of AI and its ability to replace workers, even when job cuts may have little to do with the technology". == Usage and effects == AI washing can lead to deception of customers and misleading of investors. It is also an illegal and unethical practice that lacks transparency regarding disclosing the details of a product or a service. Companies get involved in such a practice often in response to competition who might have used AI in their offerings. It might also be used as a ploy to secure funding and investment, assuming that it will attract them towards it. AI washing has been compared to dot-com bubble, when businesses appended "dot-com" to the end of the business name to boost their valuation. In September 2023, Coca-Cola released a new product called Coca-Cola Y3000, and the company stated that the Y3000 flavor had been "co-created with human and artificial intelligence". The company was accused of AI washing due to no proof of AI involvement in the creation of the product, and critics believed that AI was used as a way to grab consumer attention more than it was used in the actual product creation. In 2026, mass tech layoffs were attributed to AI washing from AI innovation instead of balance sheet restructuring. == Mitigation == Companies are expected to be transparent and clearer in communicating the usage of AI in their products or services. Consumers can mitigate the same by requesting for hard evidence from the companies regarding the usage of AI tools. Customers should evaluate the product or service as a whole rather than being swayed by the usage of AI. Informed decision making and purchasing can keep them from falling for such marketing gimmicks. The United States Securities and Exchange Commission (SEC) imposes penalties for companies indulging in such practices. In March 2024, the SEC imposed the first civil penalties on two companies for misleading statements about their use of AI, and in July 2024, it charged a corporate executive from a supposed AI hiring startup with fraud for the usage of buzzwords related to AI.
Read more →
Autonomous agent

An autonomous agent is an artificial intelligence (AI) system that can perform complex tasks independently. == Definitions == There are various definitions of autonomous agent. According to Brustoloni (1991): "Autonomous agents are systems capable of autonomous, purposeful action in the real world." According to Maes (1995): "Autonomous agents are computational systems that inhabit some complex dynamic environment, sense and act autonomously in this environment, and by doing so realize a set of goals or tasks for which they are designed." Franklin and Graesser (1997) review different definitions and propose their definition: "An autonomous agent is a system situated within and a part of an environment that senses that environment and acts on it, over time, in pursuit of its own agenda and so as to effect what it senses in the future." They explain that: "Humans and some animals are at the high end of being an agent, with multiple, conflicting drives, multiples senses, multiple possible actions, and complex sophisticated control structures. At the low end, with one or two senses, a single action, and an absurdly simple control structure we find a thermostat." == Agent appearance == Lee et al. (2015) post safety issue from how the combination of external appearance and internal autonomous agent have impact on human reaction about autonomous vehicles. Their study explores the human-like appearance agent and high level of autonomy are strongly correlated with social presence, intelligence, safety and trustworthiness. In specific, appearance impacts most on affective trust while autonomy impacts most on both affective and cognitive domain of trust where cognitive trust is characterized by knowledge-based factors and affective trust is largely emotion driven. == Applications == Agentic AI systems: Advanced AI agents that can scope out projects and complete them with necessary tools, representing a significant evolution from simple task-oriented systems. Internet of things (IoT) Integration: Autonomous agents increasingly interact with IoT devices, enabling smart home systems, industrial monitoring, and urban infrastructure management. Collaborative software development: Tools like Cognition AI's Devin aim to create autonomous software engineers capable of complex reasoning, planning, and completing engineering tasks requiring thousands of decisions. Enterprise automation: Business process automation platforms like Salesforce's Agentforce provide autonomous bots for various service functions. == Challenges and considerations == Uncertainty and incomplete information: Autonomous agents must make decisions with limited or uncertain information about their environment and future states. Integration complexity: Incorporating autonomous agents into existing systems and workflows can be technically challenging and resource-intensive. Scalability: As systems become more complex and more agents are used, maintaining coordination and avoiding conflicts becomes increasingly difficult. Trust: Research has shown the combination of external appearance and internal autonomous capabilities significantly impacts human reactions and trust. Lee et al. (2015) found that human-like appearance and high levels of autonomy are strongly correlated with social presence, intelligence, safety, and trustworthiness perceptions. Specifically, appearance impacts affective trust most significantly, while autonomy affects both affective and cognitive trust domains, where affective trust is emotionally driven, and cognitive trust is characterized by knowledge-based factors. Vulnerability to manipulation: Researchers from Harvard, MIT and other educational institutions found that AI agents could become vulnerable to manipulation and could perform detrimental actions in the process of being helpful. == Ethical and regulatory concerns == Accountability: Determining responsibility when autonomous agents make incorrect or harmful decisions remains a complex issue. Privacy and security: autonomous agents often require access to sensitive data, raising concerns about data protection and system security.
Read more →
Structural risk minimization

Structural risk minimization (SRM) is an inductive principle of use in machine learning. Commonly in machine learning, a generalized model must be selected from a finite data set, with the consequent problem of overfitting – the model becoming too strongly tailored to the particularities of the training set and generalizing poorly to new data. The SRM principle addresses this problem by balancing the model's complexity against its success at fitting the training data. This principle was first set out in a 1974 book by Vladimir Vapnik and Alexey Chervonenkis and uses the VC dimension. In practical terms, Structural Risk Minimization is implemented by minimizing E t r a i n + β H ( W ) {\displaystyle E_{train}+\beta H(W)} , where E t r a i n {\displaystyle E_{train}} is the train error, the function H ( W ) {\displaystyle H(W)} is called a regularization function, and β {\displaystyle \beta } is a constant. H ( W ) {\displaystyle H(W)} is chosen such that it takes large values on parameters W {\displaystyle W} that belong to high-capacity subsets of the parameter space. Minimizing H ( W ) {\displaystyle H(W)} in effect limits the capacity of the accessible subsets of the parameter space, thereby controlling the trade-off between minimizing the training error and minimizing the expected gap between the training error and test error. The SRM problem can be formulated in terms of data. Given n data points consisting of data x and labels y, the objective J ( θ ) {\displaystyle J(\theta )} is often expressed in the following manner: J ( θ ) = 1 2 n ∑ i = 1 n ( h θ ( x i ) − y i ) 2 + λ 2 ∑ j = 1 d θ j 2 {\displaystyle J(\theta )={\frac {1}{2n}}\sum _{i=1}^{n}(h_{\theta }(x^{i})-y^{i})^{2}+{\frac {\lambda }{2}}\sum _{j=1}^{d}\theta _{j}^{2}} The first term is the mean squared error (MSE) term between the value of the learned model, h θ {\displaystyle h_{\theta }} , and the given labels y {\displaystyle y} . This term is the training error, E t r a i n {\displaystyle E_{train}} , that was discussed earlier. The second term, places a prior over the weights, to favor sparsity and penalize larger weights. The trade-off coefficient, λ {\displaystyle \lambda } , is a hyperparameter that places more or less importance on the regularization term. Larger λ {\displaystyle \lambda } encourages sparser weights at the expense of a more optimal MSE, and smaller λ {\displaystyle \lambda } relaxes regularization allowing the model to fit to data. Note that as λ → ∞ {\displaystyle \lambda \to \infty } the weights become zero, and as λ → 0 {\displaystyle \lambda \to 0} , the model typically suffers from overfitting.
Read more →
Bazaart

Bazaart is an AI-powered design platform with image and video editing capabilities for iOS, Android, MacOS, and the web. == History == Bazaart was founded in 2012 in Israel. In April 2012, Bazaart launched a Facebook app called Pinvolve, which converts Facebook Pages into Pinterest pinboards. From June to August 2012, it participated in the DreamIt startup accelerator in New York and raised $25,000 from the accelerator. In July 2012, it launched its first version as an iPad app connected to Pinterest. In December 2013, it pivoted and launched a major version of its app, a "social" photoshop that allowed users to edit images which could be pulled in from the camera roll, social networks, and other sources. In July 2014, Bazaart reached one million downloads and in December was selected by Apple as Best of 2014. In 2015, Bazaart added Photoshop integration in a partnership with Adobe. In September 2020, Bazaart launched an Android app. In December 2020, Bazaart was selected by Google as Best of 2020. In January 2022, Bazaart added video editing capabilities. In 2023, the platform added AI-powered backgrounds and video background removal features.
Read more →
Feature (machine learning)

In machine learning and pattern recognition, a feature is an individual measurable property or characteristic of a data set. Choosing informative, discriminating, and independent features is crucial to producing effective algorithms for pattern recognition, classification, and regression tasks. Features are usually numeric, but other types such as strings and graphs are used in syntactic pattern recognition, after some pre-processing step such as one-hot encoding. The concept of "features" is related to that of explanatory variables used in statistical techniques such as linear regression. == Feature types == In feature engineering, two types of features are commonly used: numerical and categorical. Numerical features are continuous values that can be measured on a scale. Examples of numerical features include age, height, weight, and income. Numerical features can be used in machine learning algorithms directly. Categorical features are discrete values that can be grouped into categories. Examples of categorical features include gender, color, and zip code. Categorical features typically need to be converted to numerical features before they can be used in machine learning algorithms. This can be done using a variety of techniques, such as one-hot encoding, label encoding, and ordinal encoding. The type of feature that is used in feature engineering depends on the specific machine learning algorithm that is being used. Some machine learning algorithms, such as decision trees, can handle both numerical and categorical features. Other machine learning algorithms, such as linear regression, can only handle numerical features. == Classification == A numeric feature can be conveniently described by a feature vector. One way to achieve binary classification is using a linear predictor function (related to the perceptron) with a feature vector as input. The method consists of calculating the scalar product between the feature vector and a vector of weights, qualifying those observations whose result exceeds a threshold. Algorithms for classification from a feature vector include nearest neighbor classification, neural networks, and statistical techniques such as Bayesian approaches. == Examples == In character recognition, features may include histograms counting the number of black pixels along horizontal and vertical directions, number of internal holes, stroke detection and many others. In speech recognition, features for recognizing phonemes can include noise ratios, length of sounds, relative power, filter matches, logarithmic Mel-scale spectral vectors and Mel-frequency cepstral coefficients, which represent the frequency characteristics of audio signals. In spam detection algorithms, features may include the presence or absence of certain email headers, the email structure, the language, the frequency of specific terms, the grammatical correctness of the text. In computer vision, there are a large number of possible features, such as edges and objects. == Feature vectors == In pattern recognition and machine learning, a feature vector is an n-dimensional vector of numerical features that represent some object. Many algorithms in machine learning require a numerical representation of objects, since such representations facilitate processing and statistical analysis. When representing images, the feature values might correspond to the pixels of an image, while when representing texts the features might be the frequencies of occurrence of textual terms. Feature vectors are equivalent to the vectors of explanatory variables used in statistical procedures such as linear regression. Feature vectors are often combined with weights using a dot product in order to construct a linear predictor function that is used to determine a score for making a prediction. The vector space associated with these vectors is often called the feature space. In order to reduce the dimensionality of the feature space, a number of dimensionality reduction techniques can be employed. Higher-level features can be obtained from already available features and added to the feature vector; for example, for the study of diseases the feature 'Age' is useful and is defined as Age = 'Year of death' minus 'Year of birth' . This process is referred to as feature construction. Feature construction is the application of a set of constructive operators to a set of existing features resulting in construction of new features. Examples of such constructive operators include checking for the equality conditions {=, ≠}, the arithmetic operators {+,−,×, /}, the array operators {max(S), min(S), average(S)} as well as other more sophisticated operators, for example count(S, C) that counts the number of features in the feature vector S satisfying some condition C or, for example, distances to other recognition classes generalized by some accepting device. Feature construction has long been considered a powerful tool for increasing both accuracy and understanding of structure, particularly in high-dimensional problems. Applications include studies of disease and emotion recognition from speech. == Selection and extraction == The initial set of raw features can be redundant and large enough that estimation and optimization is made difficult or ineffective. Therefore, a preliminary step in many applications of machine learning and pattern recognition consists of selecting a subset of features, or constructing a new and reduced set of features to facilitate learning, and to improve generalization and interpretability. Extracting or selecting features is a combination of art and science; developing systems to do so is known as feature engineering. It requires the experimentation of multiple possibilities and the combination of automated techniques with the intuition and knowledge of the domain expert. Automating this process is feature learning, where a machine not only uses features for learning, but learns the features itself.
Read more →
Description logic

Description logics (DL) are a family of formal knowledge representation languages. Many DLs are more expressive than propositional logic but less expressive than first-order logic. In contrast to the latter, the core reasoning problems for DLs are (usually) decidable, and efficient decision procedures have been designed and implemented for these problems. There are general, spatial, temporal, spatiotemporal, and fuzzy description logics, and each description logic features a different balance between expressive power and reasoning complexity by supporting different sets of mathematical constructors. DLs are used in artificial intelligence to describe and reason about the relevant concepts of an application domain (known as terminological knowledge). It is of particular importance in providing a logical formalism for ontologies and the Semantic Web: the Web Ontology Language (OWL) and its profiles are based on DLs. A major area of application of DLs and OWL is in biomedical informatics, where they assist in the codification of biomedical knowledge. DLs and OWL are also applied in other domains, including defense, climate modeling, and large-scale industrial knowledge graphs. == Introduction == A DL models concepts, roles and individuals, and their relationships. The fundamental modeling concept of a DL is the axiom—a logical statement relating roles and/or concepts. This is a key difference from the frames paradigm where a frame specification declares and completely defines a class. == Nomenclature == === Terminology compared to FOL and OWL === The description logic community uses different terminology than the first-order logic (FOL) community for operationally equivalent notions; some examples are given below. The Web Ontology Language (OWL) uses again a different terminology, also given in the table below. === Naming convention === There are many varieties of description logics and there is an informal naming convention, roughly describing the operators allowed. The expressivity is encoded in the label for a logic starting with one of the following basic logics: Followed by any of the following extensions: ==== Exceptions ==== Some canonical DLs that do not exactly fit this convention are: ==== Examples ==== As an example, A L C {\displaystyle {\mathcal {ALC}}} is a centrally important description logic from which comparisons with other varieties can be made. A L C {\displaystyle {\mathcal {ALC}}} is simply A L {\displaystyle {\mathcal {AL}}} with complement of any concept allowed, not just atomic concepts. A L C {\displaystyle {\mathcal {ALC}}} is used instead of the equivalent A L U E {\displaystyle {\mathcal {ALUE}}} . A further example, the description logic S H I Q {\displaystyle {\mathcal {SHIQ}}} is the logic A L C {\displaystyle {\mathcal {ALC}}} plus extended cardinality restrictions, and transitive and inverse roles. The naming conventions aren't purely systematic so that the logic A L C O I N {\displaystyle {\mathcal {ALCOIN}}} might be referred to as A L C N I O {\displaystyle {\mathcal {ALCNIO}}} and other abbreviations are also made where possible. The Protégé ontology editor supports S H O I N ( D ) {\displaystyle {\mathcal {SHOIN}}^{\mathcal {(D)}}} . Three major biomedical informatics terminology bases, SNOMED CT, GALEN, and GO, are expressible in E L {\displaystyle {\mathcal {EL}}} (with additional role properties). OWL 2 provides the expressiveness of S R O I Q ( D ) {\displaystyle {\mathcal {SROIQ}}^{\mathcal {(D)}}} , OWL-DL is based on S H O I N ( D ) {\displaystyle {\mathcal {SHOIN}}^{\mathcal {(D)}}} , and for OWL-Lite it is S H I F ( D ) {\displaystyle {\mathcal {SHIF}}^{\mathcal {(D)}}} . == History == Description logic was given its current name in the 1980s. Previous to this it was called (chronologically): terminological systems, and concept languages. === Knowledge representation === Frames and semantic networks lack formal (logic-based) semantics. DL was first introduced into knowledge representation (KR) systems to overcome this deficiency. The first DL-based KR system was KL-ONE (by Ronald J. Brachman and Schmolze, 1985). During the '80s other DL-based systems using structural subsumption algorithms were developed including KRYPTON (1983), LOOM (1987), BACK (1988), K-REP (1991) and CLASSIC (1991). This approach featured DL with limited expressiveness but relatively efficient (polynomial time) reasoning. In the early '90s, the introduction of a new tableau based algorithm paradigm allowed efficient reasoning on more expressive DL. DL-based systems using these algorithms — such as KRIS (1991) — show acceptable reasoning performance on typical inference problems even though the worst case complexity is no longer polynomial. From the mid '90s, reasoners were created with good practical performance on very expressive DL with high worst case complexity. Examples from this period include FaCT, RACER (2001), CEL (2005), and KAON 2 (2005). DL reasoners, such as FaCT, FaCT++, RACER, DLP and Pellet, implement the method of analytic tableaux. KAON2 is implemented by algorithms which reduce a SHIQ(D) knowledge base to a disjunctive datalog program. === Semantic web === The DARPA Agent Markup Language (DAML) and Ontology Inference Layer (OIL) ontology languages for the Semantic Web can be viewed as syntactic variants of DL. In particular, the formal semantics and reasoning in OIL use the S H I Q {\displaystyle {\mathcal {SHIQ}}} DL. The DAML+OIL DL was developed as a submission to—and formed the starting point of—the World Wide Web Consortium (W3C) Web Ontology Working Group. In 2004, the Web Ontology Working Group completed its work by issuing the OWL recommendation. The design of OWL is based on the S H {\displaystyle {\mathcal {SH}}} family of DL with OWL DL and OWL Lite based on S H O I N ( D ) {\displaystyle {\mathcal {SHOIN}}^{\mathcal {(D)}}} and S H I F ( D ) {\displaystyle {\mathcal {SHIF}}^{\mathcal {(D)}}} respectively. The W3C OWL Working Group began work in 2007 on a refinement of - and extension to - OWL. In 2009, this was completed by the issuance of the OWL2 recommendation. OWL2 is based on the description logic S R O I Q ( D ) {\displaystyle {\mathcal {SROIQ}}^{\mathcal {(D)}}} . Practical experience demonstrated that OWL DL lacked several key features necessary to model complex domains. == Modeling == === TBox vs Abox === In DL, a distinction is drawn between the so-called TBox (terminological box) and the ABox (assertional box). In general, the TBox contains sentences describing concept hierarchies (i.e., relations between concepts) while the ABox contains ground sentences stating where in the hierarchy, individuals belong (i.e., relations between individuals and concepts). For example, the statement: belongs in the TBox, while the statement: belongs in the ABox. Note that the TBox/ABox distinction is not significant, in the same sense that the two "kinds" of sentences are not treated differently in first-order logic (which subsumes most DL). When translated into first-order logic, a subsumption axiom like (1) is simply a conditional restriction to unary predicates (concepts) with only variables appearing in it. Clearly, a sentence of this form is not privileged or special over sentences in which only constants ("grounded" values) appear like (2). === Motivation for having Tbox and Abox === So why was the distinction introduced? The primary reason is that the separation can be useful when describing and formulating decision-procedures for various DL. For example, a reasoner might process the TBox and ABox separately, in part because certain key inference problems are tied to one but not the other one ('classification' is related to the TBox, 'instance checking' to the ABox). Another example is that the complexity of the TBox can greatly affect the performance of a given decision-procedure for a certain DL, independently of the ABox. Thus, it is useful to have a way to talk about that specific part of the knowledge base. The secondary reason is that the distinction can make sense from the knowledge base modeler's perspective. It is plausible to distinguish between our conception of terms/concepts in the world (class axioms in the TBox) and particular manifestations of those terms/concepts (instance assertions in the ABox). In the above example: when the hierarchy within a company is the same in every branch but the assignment to employees is different in every department (because there are other people working there), it makes sense to reuse the TBox for different branches that do not use the same ABox. There are two features of description logic that are not shared by most other data description formalisms: DL does not make the unique name assumption (UNA) or the closed-world assumption (CWA). Not having UNA means that two concepts with different names may be allowed by some inference to be shown to be equivalent. Not having CWA, or rather having the open world assumption (OWA) means that
Read more →
Lynda Soderholm

Lynda Soderholm is a physical chemist at the U.S. Department of Energy's (DOE) Argonne National Laboratory with a specialty in f-block elements. She is a senior scientist and the lead of the Actinide, Geochemistry & Separation Sciences Theme within Argonne's Chemical Sciences and Engineering Division. Her specific role is the Separation Science group leader within Heavy Element Chemistry and Separation Science (HESS), directing basic research focused on low-energy methods for isolating lanthanide and actinide elements from complex mixtures. She has made fundamental contributions to understanding f-block chemistry and characterizing f-block elements. Soderholm became a Fellow of the American Association for the Advancement of Science (AAAS) in 2013, and is also an Argonne Distinguished Fellow. == Early life and education == Soderholm was awarded her PhD in 1982 by McMaster University under the direction of Prof John Greedan. Her dissertation focused on characterizing the structural and magnetic properties of a series of ternary f-ion oxides. After graduating, she was awarded a NATO postdoctoral fellow at the Centre national de la recherche scientifique in France from 1982 until 1985. After a short postdoctoral appointment as an Argonne postdoctoral fellow she was promoted to staff scientist the same year. Over several years, she moved up the ranks, becoming a senior chemist in 2001. She was also an adjunct professor at the University of Notre Dame from 2003 until 2007. In 2021, Soderholm was appointed interim Division Director for the Chemical Sciences and Engineering Division. == Career and research == === Uncovering structure of Yttrium-123 Superconductor === Early in her career, Soderholm focused on the characterizing the magnetic and electronic behavior of compounds containing f-ions (lanthanides and actinides) with a focus on high-Tc materials, compounds that are superconducting under usually high temperatures. She was part of the research group that first determined the structure of YBa2Cu3O7. Their discovery formed the foundation for the further developments in the broad field of superconductivity. === Understanding f-ion speciation in solution === Continuing her interest in the f-elements, Soderholm shifted her focus from solid-state materials to nanoparticles and solutions, taking advantage of advances in X-ray structural probes made available by synchrotron facilities. Building on her earlier work using neutron scattering, her team became the first to discover that plutonium exists in solution as tiny, well-defined nanoparticles. This work solved a longstanding problem in understanding transport of plutonium in the environment and resulted in the development of a new, patented approach to separating plutonium during nuclear reprocessing. === Using machine learning to evaluate molecular structures === Soderholm's more recent projects use machine learning to understand the influence of complex molecular structuring in solutions, in connection with low-energy processes for separation of f-block elements from complex mixtures. == Awards and honors == University of Chicago Board of Governors' Distinguished Performance Award, 2009. Fellow of the American Association for the Advancement of Science, 2013. Argonne Distinguished Fellow, 2016 DOE materials sciences research competition for Outstanding Scientific Accomplishments in Solid State Physics, 1987. == Select publications == Beno, M. A.; Soderholm, L.; Capone, D. W., II; Hinks, D. G.; Jorgensen, J. D.; Grace, J. D.; Schuller, I. K.; Segre, C. U.; Zhang, K., Structure of the single-phase high-temperature superconductor yttrium barium copper oxide (YBa2Cu3O7−δ). Appl. Phys. Lett. 1987, 51 (1), 57–9. Soderholm, L.; Zhang, K.; Hinks, D. G.; Beno, M. A.; Jorgensen, J. D.; Segre, C. U.; Schuller, I. K., Incorporation of praseodymium in YBa2Cu3O7−δ: electronic effects on superconductivity. Nature (London) 1987, 328 (6131), 604–5. Antonio, M. R.; Williams, C. W.; Soderholm, L., Berkelium redox speciation. Radiochim. Acta 2002, 90 (12), 851–856. Soderholm, L.; Skanthakumar, S.; Neuefeind, J., Determination of actinide speciation in solution using high-energy X-ray scattering. Anal. Bioanal. Chem. 2005, 383 (1), 48–55. Forbes, T. Z.; Burns, P. C.; Skanthakumar, S.; Soderholm, L., Synthesis, structure, and magnetism of Np2O5. J. Am. Chem. Soc. 2007, 129 (10), 2760–2761. Soderholm, L.; Almond, P. M.; Skanthakumar, S.; Wilson, R. E.; Burns, P. C., The structure of the plutonium oxide nanocluster [Pu38O56Cl54(H2O)8]14-. Angew. Chem., Int. Ed. 2008, 47 (2), 298–302. Jensen, M. P.; Gorman-Lewis, D.; Aryal, B.; Paunesku, T.; Vogt, S.; Rickert, P. G.; Seifert, S.; Lai, B.; Woloschak, G. E.; Soderholm, L., An iron-dependent and transferrin-mediated cellular uptake pathway for plutonium. Nat. Chem. Biol. 2011, 7 (8), 560–565. Wilson, R. E.; Skanthakumar, S.; Soderholm, L., Separation of Plutonium Oxide Nanoparticles and Colloids. Angew. Chem., Int. Ed. 2011, 50 (47), 11234–11237. Knope, K. E.; Soderholm, L., Solution and solid-state structural chemistry of actinide hydrates and their hydrolysis and condensation products. Chem. Rev. 2013, 113 (2), 944–994. Luo, G.; Bu, W.; Mihaylov, M.; Kuzmenko, I.; Schlossman, M. L.; Soderholm, L., X-ray reflectivity reveals a nonmonotonic ion-density profile perpendicular to the surface of ErCl3 aqueous solutions. J. Phys. Chem. C 2013, 117 (37), 19082–19090. Jin, G. B.; Lin, J.; Estes, S. L.; Skanthakumar, S.; Soderholm, L., Influence of countercation hydration enthalpies on the formation of molecular complexes: A thorium-nitrate example. J. Am. Chem. Soc. 2017, 139 (49), 18003–18008. == Patents == Solvent extraction system for plutonium colloids and other oxide nano-particles, (2016).
Read more →
Niki.ai

Niki was an artificial intelligence company headquartered in Bangalore, Karnataka. It was founded in May 2015 by IIT Kharagpur graduates Sachin Jaiswal, Keshav Prawasi, Shishir Modi, and Nitin Babel. The Niki android app was launched for a limited beta in June 2015, then released for public during YourStory's TechSparks 2015, and is a Tech30 company. The company raised an undisclosed amount in seed funding from Unilazer Ventures, a Mumbai-based VC firm founded by Ronnie Screwvala, in October 2015. This was followed by another seed funding round by Ratan Tata in May 2016. The company then raised US$2 million in Series A round of funding from SAP.iO, existing investors and some US and German-based investors, among others. Niki.ai shut down in October 2021 as per media reports. Website not working. == Product == The product is an artificial intelligence-powered chatbot which works as an intelligent personal assistant, named Niki. Leveraging natural language processing and machine learning, Niki presents a chat-based natural language user interface to the users where they can interact with Niki in their natural language. Niki understands how users chat in India, deciphers the words, in the context of product/services that they would like to purchase, and comes up with apt recommendations. Initially, it was only available on the Android platform as a mobile app. The company has expanded its operations to the Facebook Messenger and Apple iOS platforms. The company aims to soon be present on more messaging platforms like Slack and WhatsApp. The company currently provides 20+ services to over 2 million consumers, covering a wide spectrum ranging from utility services like mobile recharge, bill payments, travel services like cabs, buses, hotels and entertainment services like movies and events. Services such as flights and healthcare are also planned. == Partnerships == In September 2017, Infosys Finacle joined with Niki.ai to provide chat-based service to banking customers. In August 2017, Niki partnered with LazyPay to enable a 'buy now, pay later' feature for its users.
Read more →
Quantification (machine learning)

In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation
Read more →
Personality computing

Personality computing is a research field related to artificial intelligence and personality psychology that studies personality by means of computational techniques from different sources, including text, multimedia, and social networks. == Overview == Personality computing addresses three main problems involving personality: automatic personality recognition, perception, and synthesis. Automatic personality recognition is the inference of the personality type of target individuals from their digital footprint. Automatic personality perception is the inference of the personality attributed by an observer to a target individual based on some observable behavior. Automatic personality synthesis is the generation of the style or behaviour of artificial personalities in Avatars and virtual agents. Self-assessed personality tests or observer ratings are always exploited as the ground truth for testing and validating the performance of artificial intelligence algorithms for the automatic prediction of personality types. There is a wide variety of personality tests, such as the Myers Briggs Type Indicator (MBTI) or the MMPI, but the most used are tests based on the Five Factor Model such as the Revised NEO Personality Inventory. Personality computing can be considered as an extension or complement of Affective computing, where the former focuses on personality traits and the latter on affective states. A further extension of the two fields is Character Computing which combines various character states and traits including but not limited to personality and affect. == History == Personality computing began around 2005 with the pioneering research in personality recognition by Shlomo Argamon and later by François Mairesse. These works showed that personality traits could be inferred with reasonable accuracy from text, such as blogs, self-presentations, and email addresses. In 2008, the concept of "portable personality" for the distributed management of personality profiles has been developed. A few years later, research began in personality recognition and perception from multimodal and social signals, such as recorded meetings and voice calls. In the 2010s, the research focused mainly on personality recognition and perception from social media, helped by the first workshops organized by Fabio Celli. In particular personality was extracted from Facebook, Twitter and Instagram. In the same years, automatic personality synthesis helped improve the coherence of simulated behavior in virtual agents. Scientific works by Michal Kosinski demonstrated the validity of Personality Computing from different digital footprints, in particular from user preferences such as Facebook page likes, showed that machines can recognize personality better than humans and raised a warning against Cambridge Analytica and misuse of this kind of technology. == Applications == Personality computing techniques, in particular personality recognition and perception, have applications in Social media marketing, where they can help reducing the cost of advertising campaigns through psychological targeting.
Read more →
Hybrid intelligent system

Hybrid intelligent system denotes a software system which employs, in parallel, a combination of methods and techniques from artificial intelligence subfields, such as: Neuro-symbolic systems Neuro-fuzzy systems Hybrid connectionist-symbolic models Fuzzy expert systems Connectionist expert systems Evolutionary neural networks Genetic fuzzy systems Rough fuzzy hybridization Reinforcement learning with fuzzy, neural, or evolutionary methods as well as symbolic reasoning methods. From the cognitive science perspective, every natural intelligent system is hybrid because it performs mental operations on both the symbolic and subsymbolic levels. For the past few years, there has been an increasing discussion of the importance of A.I. Systems Integration. Based on notions that there have already been created simple and specific AI systems (such as systems for computer vision, speech synthesis, etc., or software that employs some of the models mentioned above) and now is the time for integration to create broad AI systems. Proponents of this approach are researchers such as Marvin Minsky, Ron Sun, Aaron Sloman, Angelo Dalli and Michael A. Arbib. An example hybrid is a hierarchical control system in which the lowest, reactive layers are sub-symbolic. The higher layers, having relaxed time constraints, are capable of reasoning from an abstract world model and performing planning (even by hybrid wisdom). Intelligent systems usually rely on hybrid reasoning processes, which include induction, deduction, abduction and reasoning by analogy.
Read more →
Kleene star

In formal language theory, the Kleene star (or Kleene operator or Kleene closure) refers to two related unary operations, that can be applied either to an alphabet of symbols or to a formal language, a set of strings (finite sequences of symbols). The Kleene star operator on an alphabet V generates the set V of all finite-length strings over V, that is, finite sequences whose elements belong to V; in mathematics, it is more commonly known as the free monoid construction. The Kleene star operator on a language L generates another language L, the set of all strings that can be obtained as a concatenation of zero or more members of L. In both cases, repetitions are allowed. The Kleene star operators are named after American mathematician Stephen Cole Kleene, who first introduced and widely used it to characterize automata for regular expressions. == Of an alphabet == Given an alphabet V {\displaystyle V} , define V 0 = { ε } {\displaystyle V^{0}=\{\varepsilon \}} (the set consists only of the empty string), V 1 = V , {\displaystyle V^{1}=V,} and define recursively the set V i + 1 = { w v : w ∈ V i and v ∈ V } {\displaystyle V^{i+1}=\{wv:w\in V^{i}{\text{ and }}v\in V\}} for each i > 0 , {\displaystyle i>0,} where w v {\displaystyle wv} denotes the string obtained by appending the single character v {\displaystyle v} to the end of w {\displaystyle w} . Here, V i {\displaystyle V^{i}} can be understood to be the set of all strings of length exactly i {\displaystyle i} , with characters from V {\displaystyle V} . The definition of Kleene star on V {\displaystyle V} is V ∗ = ⋃ i ≥ 0 V i = V 0 ∪ V 1 ∪ V 2 ∪ V 3 ∪ V 4 ∪ ⋯ . {\displaystyle V^{}=\bigcup _{i\geq 0}V^{i}=V^{0}\cup V^{1}\cup V^{2}\cup V^{3}\cup V^{4}\cup \cdots .} == Of a language == Given a language L {\displaystyle L} (any finite or infinite set of strings), define L 0 = { ε } {\displaystyle L^{0}=\{\varepsilon \}} (the language consisting only of the empty string), L 1 = L , {\displaystyle L^{1}=L,} and define recursively the set L i + 1 = { w v : w ∈ L i and v ∈ L } {\displaystyle L^{i+1}=\{wv:w\in L^{i}{\text{ and }}v\in L\}} for each i > 0 , {\displaystyle i>0,} where w v {\displaystyle wv} denotes the string obtained by concatenating w {\displaystyle w} and v {\displaystyle v} . Here, L i {\displaystyle L^{i}} can be understood to be the set of all strings that can be obtained by concatenating exactly i {\displaystyle i} strings from L {\displaystyle L} , allowing repetitions. The definition of Kleene star on L {\displaystyle L} is L ∗ = ⋃ i ≥ 0 L i = L 0 ∪ L 1 ∪ L 2 ∪ L 3 ∪ L 4 ∪ ⋯ . {\displaystyle L^{}=\bigcup _{i\geq 0}L^{i}=L^{0}\cup L^{1}\cup L^{2}\cup L^{3}\cup L^{4}\cup \cdots .} == Kleene plus == In some formal language studies, (e.g. AFL theory) a variation on the Kleene star operation called the Kleene plus is used. The Kleene plus omits the V 0 {\displaystyle V^{0}} or L 0 {\displaystyle L^{0}} term in the above unions. In other words, the Kleene plus on V {\displaystyle V} is V + = ⋃ i ≥ 1 V i = V 1 ∪ V 2 ∪ V 3 ∪ ⋯ , {\displaystyle V^{+}=\bigcup _{i\geq 1}V^{i}=V^{1}\cup V^{2}\cup V^{3}\cup \cdots ,} or V + = V ∗ V . {\displaystyle V^{+}=V^{}V.} == Examples == Example of Kleene star applied to a set of strings: {"ab","c"} = { ε, "ab", "c", "abab", "abc", "cab", "cc", "ababab", "ababc", "abcab", "abcc", "cabab", "cabc", "ccab", "ccc", ...}. Example of Kleene star applied to a set of strings without the prefix property: {"a","ab","b"} = { ε, "a", "ab", "b", "aa", "aab", "aba", "abab", "abb", "ba", "bab", "bb", ...};In this example, the string "aab" can be obtained in two different ways. The Sardinas-Patterson algorithm can be used to check for a given V whether any member of V can be obtained in more than one way. Example of Kleene and Kleene plus applied to a set of characters (following the C programming language convention where a character is denoted by single quotes and a string is denoted by double quotes): {'a', 'b', 'c'} = { ε, "a", "b", "c", "aa", "ab", "ac", "ba", "bb", "bc", "ca", "cb", "cc", "aaa", "aab", ...}. {'a', 'b', 'c'}+ = { "a", "b", "c", "aa", "ab", "ac", "ba", "bb", "bc", "ca", "cb", "cc", "aaa", "aab", ...}. == Properties == If V {\displaystyle V} is any finite or countably infinite set of characters, then V ∗ {\displaystyle V^{}} is a countably infinite set. As a result, each formal language over a finite or countably infinite alphabet Σ {\displaystyle \Sigma } is countable, since it is a subset of the countably infinite set Σ ∗ {\displaystyle \Sigma ^{}} . ( L ∗ ) ∗ = L ∗ {\displaystyle (L^{})^{}=L^{}} , which means that the Kleene star operator is an idempotent unary operator, as ( L ∗ ) i = L ∗ {\displaystyle (L^{})^{i}=L^{}} for every i ≥ 1 {\displaystyle i\geq 1} . V ∗ = { ε } {\displaystyle V^{}=\{\varepsilon \}} , if V {\displaystyle V} is the empty set ∅. For the version of the Kleene star operator on languages, L ∗ = { ε } {\displaystyle L^{}=\{\varepsilon \}} when L {\displaystyle L} is either the empty set ∅ or the singleton set { ε } {\displaystyle \{\varepsilon \}} . == Generalization == Strings form a monoid with concatenation as the binary operation and ε the identity element. In addition to strings, the Kleene star is defined for any monoid. More precisely, let (M, ⋅) be a monoid, and S ⊆ M. Then S is the smallest submonoid of M containing S; that is, S contains the neutral element of M, the set S, and is such that if x,y ∈ S, then x⋅y ∈ S. Furthermore, the Kleene star is generalized by including the -operation (and the union) in the algebraic structure itself by the notion of complete star semiring.
Read more →
Highway network

In machine learning, the Highway Network was the first working very deep feedforward neural network with hundreds of layers, much deeper than previous neural networks. It uses skip connections modulated by learned gating mechanisms to regulate information flow, inspired by long short-term memory (LSTM) recurrent neural networks. The advantage of the Highway Network over other deep learning architectures is its ability to overcome or partially prevent the vanishing gradient problem, thus improving its optimization. Gating mechanisms are used to facilitate information flow across the many layers ("information highways"). Highway Networks have found use in text sequence labeling and speech recognition tasks. In 2014, the state of the art was training deep neural networks with 20 to 30 layers. Stacking too many layers led to a steep reduction in training accuracy, known as the "degradation" problem. In 2015, two techniques were developed to train such networks: the Highway Network (published in May), and the residual neural network, or ResNet (December). ResNet behaves like an open-gated Highway Net. == Model == The model has two gates in addition to the H ( W H , x ) {\displaystyle H(W_{H},x)} gate: the transform gate T ( W T , x ) {\displaystyle T(W_{T},x)} and the carry gate C ( W C , x ) {\displaystyle C(W_{C},x)} . The latter two gates are non-linear transfer functions (specifically sigmoid by convention). The function H {\displaystyle H} can be any desired transfer function. The carry gate is defined as: C ( W C , x ) = 1 − T ( W T , x ) {\displaystyle C(W_{C},x)=1-T(W_{T},x)} while the transform gate is just a gate with a sigmoid transfer function. == Structure == The structure of a hidden layer in the Highway Network follows the equation: y = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ C ( x , W C ) = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ ( 1 − T ( x , W T ) ) {\displaystyle {\begin{aligned}y=H(x,W_{H})\cdot T(x,W_{T})+x\cdot C(x,W_{C})\\=H(x,W_{H})\cdot T(x,W_{T})+x\cdot (1-T(x,W_{T}))\end{aligned}}} == Related work == Sepp Hochreiter analyzed the vanishing gradient problem in 1991 and attributed to it the reason why deep learning did not work well. To overcome this problem, Long Short-Term Memory (LSTM) recurrent neural networks have residual connections with a weight of 1.0 in every LSTM cell (called the constant error carrousel) to compute y t + 1 = F ( x t ) + x t {\textstyle y_{t+1}=F(x_{t})+x_{t}} . During backpropagation through time, this becomes the residual formula y = F ( x ) + x {\textstyle y=F(x)+x} for feedforward neural networks. This enables training very deep recurrent neural networks with a very long time span t. A later LSTM version published in 2000 modulates the identity LSTM connections by so-called "forget gates" such that their weights are not fixed to 1.0 but can be learned. In experiments, the forget gates were initialized with positive bias weights, thus being opened, addressing the vanishing gradient problem. As long as the forget gates of the 2000 LSTM are open, it behaves like the 1997 LSTM. The Highway Network of May 2015 applies these principles to feedforward neural networks. It was reported to be "the first very deep feedforward network with hundreds of layers". It is like a 2000 LSTM with forget gates unfolded in time, while the later Residual Nets have no equivalent of forget gates and are like the unfolded original 1997 LSTM. If the skip connections in Highway Networks are "without gates," or if their gates are kept open (activation 1.0), they become Residual Networks. The residual connection is a special case of the "short-cut connection" or "skip connection" by Rosenblatt (1961) and Lang & Witbrock (1988) which has the form x ↦ F ( x ) + A x {\displaystyle x\mapsto F(x)+Ax} . Here the randomly initialized weight matrix A does not have to be the identity mapping. Every residual connection is a skip connection, but almost all skip connections are not residual connections. The original Highway Network paper not only introduced the basic principle for very deep feedforward networks, but also included experimental results with 20, 50, and 100 layers networks, and mentioned ongoing experiments with up to 900 layers. Networks with 50 or 100 layers had lower training error than their plain network counterparts, but no lower training error than their 20 layers counterpart (on the MNIST dataset, Figure 1 in ). No improvement on test accuracy was reported with networks deeper than 19 layers (on the CIFAR-10 dataset; Table 1 in ). The ResNet paper, however, provided strong experimental evidence of the benefits of going deeper than 20 layers. It argued that the identity mapping without modulation is crucial and mentioned that modulation in the skip connection can still lead to vanishing signals in forward and backward propagation (Section 3 in ). This is also why the forget gates of the 2000 LSTM were initially opened through positive bias weights: as long as the gates are open, it behaves like the 1997 LSTM. Similarly, a Highway Net whose gates are opened through strongly positive bias weights behaves like a ResNet. The skip connections used in modern neural networks (e.g., Transformers) are dominantly identity mappings.
Read more →
TinyML

TinyML (short for tiny machine learning) is an area of machine learning that focuses on deploying and running models on low-power, resource-constrained embedded systems such as microcontrollers and edge devices. TinyML supports on-device inference with low latency and minimal reliance on cloud connectivity, which makes it suitable for applications in the Internet of Things (IoT), wearable devices, and real-time systems. == History == The idea of running machine learning models on embedded systems has gained traction in the late 2010s, as model compression, quantization, and efficient neural network architectures progressed. The term TinyML was popularized in 2019 with the publication of the book TinyML by Pete Warden and Daniel Situnayake and the creation of the TinyML Foundation.
Read more →