AI Art That Looks Real

AI Art That Looks Real — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Scanimate

Scanimate is an analog computer animation (video synthesizer) system created by Lee Harrison III of Denver, Colorado. Harrison had developed its predecessor, ANIMAC, which generated used a motion capture system, based on a body suit with potentiometers. In contrast, Scanimate included TV technology. Scanimate's successor was called Caesar, and used a digital computer to control the analog system. The eight Scanimate systems were used to produce much of the video-based animation seen on television between most of the 1970s and early 1980s in commercials, promotions, and show openings. One of the major advantages the Scanimate system had over film-based animation and computer animation was the ability to create animations in real time. The speed with which animation could be produced on the system because of this, as well as its range of possible effects, helped it to supersede film-based animation techniques for television graphics. By the mid-1980s, it was superseded by digital computer animation, which produced sharper images and more sophisticated 3D imagery. Animations created on Scanimate and similar analog computer animation systems have a number of characteristic features that distinguish them from film-based animation: the motion is extremely fluid, using all 60 fields per second (in NTSC format video) or 50 fields (in PAL format video) rather than the 24 frames per second that film uses; the colors are much brighter and more saturated; and the images have a very "electronic" look that results from the direct manipulation of video signals through which the Scanimate produces the images. == How it works == A special high-resolution (around 945 lines) monochrome camera records high-contrast artwork. The image is then displayed on a high-resolution screen. Unlike a normal monitor, its deflection signals are passed through a special analog computer that enables the operator to bend the image in a variety of ways. The image is then shot from the screen by either a film camera or a video camera. In the case of a video camera, this signal is then fed into a colorizer, a device that takes certain shades of grey and turns it into color as well as transparency. The idea behind this is that the output of the Scanimate itself is always monochrome. Another advantage of the colorizer is that it gives the operator the ability to continuously add layers of graphics. This makes possible the creation of very complex graphics. This is done by using two video recorders. The background is played by one recorder and then recorded by another one. This process is repeated for every layer. This requires very high-quality video recorders (such as both the Ampex VR-2000 or IVC's IVC-9000 of Scanimate's era, the IVC-9000 being used quite frequently for Scanimate composition due to its very high generational quality between re-recordings). == Current usage == Two of the Scanimates are still in use at ZFx studios in Asheville, North Carolina. The original "Black Swan" R&D machine has been updated with more modern power supplies and can produce material in standard or 1080P high definition video. The "white Pearl" machine is the last one produced and is being kept in its original configuration for historical purposes by David Sieg at ZFx inc. The machines are installed in a working production environment with Grass Valley switchers, Kaleidoscope digital video effects systems, and Accom digital disk recorders for layering. == Use in television, music and films == === Music videos === Let's Groove by Earth, Wind & Fire Get Down on It by Kool & the Gang Blame It on the Boogie by The Jacksons Knock on Wood by Amii Stewart Popcorn Love by New Edition === TV programs/movies === === TV channels/home video/TV productions ===
Read more →
SwissCovid

SwissCovid is a COVID-19 contact tracing app used for digital contact tracing in Switzerland. Use of the app is voluntary and based on a decentralized approach using Bluetooth Low Energy and Decentralized Privacy-Preserving Proximity Tracing (dp3t). == Development == The app was developed in collaboration with the FOPH by Federal Office for Information Technology, Systems and Communications FOITT, École polytechnique fédérale de Lausanne (EPFL) and the Swiss Federal Institute of Technology in Zurich (ETH) as well as other experts. == Non-interoperability with applications in European countries == There is an agreement between EU countries to make applications compatible. However, there is no legal basis for the SwissCovid application to be part of this portal even though technically speaking it is ready, according to Sang-Ill Kim, head of the digital transformation department of the Federal Office of Public Health. == Criticism == === Not full open source and dependence on Google and Apple === In June 2020, researchers Serge Vaudenay and Martin Vuagnoux published a critical analysis of the application, noting that it relies heavily on Google and Apple's exposure notification system, which is integrated into their respective Android and iOS operating systems. Since Google and Apple have not released the full source code of this system, this would call into question the truly open source nature of the application. The researchers note that the dp3t collective, which includes the developers of the application, has asked Google and Apple to release their code. Moreover, they criticize the official description of the application and its functionalities, as well as the adequacy of the legal basis for its effective operation. === Cyber attacks === Professor Serge Vaudenay and Martin Vuagnoux identify also various security vulnerabilities in the application. The system would thus allow a third party to trace the movements of a phone using the application by means of Bluetooth sensors scattered along its path, for example in a building. Another possible attack would be to copy identifiers from the phones of people who may be ill (for example, in a hospital), and to reproduce those identifiers in order to receive notification of exposure to COVID-19 and illegitimately benefit from quarantine (thus entitling them to paid leave, a postponed examination, or other benefits). The system would also allow a third party to use a phone using the application by means of Bluetooth sensors scattered along the way. Paul-Olivier Dehaye of Personaldata.io and professor Joel Reardon of the University of Calgary published in June 2020 several examples of AEM (Associated Encrypted Metadata) replay and manipulation attacks via software development kits (SDKs) found in benign third-party mobile applications downloaded by the general public and having the phone's Bluetooth access permissions and in September 2020 a paper indicating that "Bluetooth-based proximity tracing apps are fundamentally insecure with respect to an attacker leveraging a malevolent app or SDK". === Costs === According to a publication by the federal administration, "the costs of developing the software for the mobile phone application, the GR back-end and the code management system as well as the costs for access management for the cantonal doctors' services are estimated at a one-off amount of 1.65 million francs. However, the Zurich-based company Ubique, responsible for the development of the application, was finally awarded the mandate to develop the application for an amount of 1.8 million francs. Through the Botnar Foundation based in Basel, École polytechnique fédérale de Lausanne received 3.5 million Swiss francs for the development of the application
Read more →
Application Lifecycle Framework

The Application Lifecycle Framework (ALF) was a project by the Eclipse Foundation that aimed to create a standardized, open-source system to allow different application lifecycle management (ALM) tools to work together more easily. The goal was to provide common protocols and integration services that would let software development tools from different vendors communicate and share data. However, the project failed to gain sufficient support from major industry players and was terminated in 2008.
Read more →
CEITON

CEITON is a web-based software system for facilitating and automating business processes such as planning, scheduling, and payroll using workflow technologies. The system is used by several media companies such as MDR, Yle, RAI and Red Bull Media House. In December 2018, the first CEITON User Group Meeting took place in Leipzig, Germany. == Architecture == The software runs on a server (on premises) or in the cloud and is scalable on parallel servers. Data security is warranted by role-based access control (RBAC). The software is used via web-browsers and not dependent on particular system software. == Structure and Features == CEITON combines the two classical approaches of production planning and control and workflow management. === Project Management === The scheduling system plans, manages, bills, and analyzes projects or tasks. It manages human and technical resources, material, and locations on a single GUI. The system uses a gantt chart to assign tasks to be done to available and eligible resources (i.e. staff), automatically or by drag-and-drop. The scheduling module includes material management, resource management/ human resource management, integration of freelancers, clients and suppliers, long-term budget planning, time-tracking, shift scheduling, quality management, delivery and logistics, document management, archive, analysis and controlling, business reporting, as well as all accounting and documentation processes. === Workflow === The workflow management system module coordinates business processes. Processes are defined once as a workflow and then repeatedly executed. Human resources are automatically assigned to steps (tasks) and integrated in workflow forms. Systems are integrated with an EAI/SOAP module, allowing data exchange with arbitrary external systems which are also involved in the business process. It also features a 3-D workflow overview in which the status of each project step can be determined by its color in the overview. === Process Management === For project and order processing management, business processes are designed as workflows, and coordinate communication automatically. Different user interfaces for staff, customers or suppliers can be created so each gets only relevant information. Different workflow forms are associated with different log-ins. The main application for the system is knowledge-based business processes, in which many people are involved and virtual results are produced, e.g. in research, or development of media products, such as TV and movies. Broadcasters and media companies such as MDR and Yle use CEITON to control their production processes for products and services and coordinate complex workflows with all kinds of resources. === Integrations === An integrated EAI module allows CEITON to integrate every external system in any business process without programming, using SOAP and similar technologies. Aspera and FileCatalyst were integrated for faster data transfer, yet complex ERP systems and numerous SAP modules have also been integrated, for example, to extract working times to payroll. === Mobile Working === Since Version 7, released in 2015, CEITON includes a time-tracking module allowing employees to enter their times from mobile devices such as tablets running Android, iPhones etc. == History == Ceiton Technologies (SME tech firm), the company developing CEITON, was founded in Leipzig, Germany in 2000, staffing solutions for the Bureau of Internal Revenue in Manila, Philippines, were implemented in 2000 together with the Deutsche Gesellschaft für Technische Zusammenarbeit of the German government. The first version (1.0) of the software was released in July 2001. The product was originally developed for German broadcasting companies. CEITON is named after the Japanese concept Seiton, one of the principles of Japanese workplace design methodology known as 5S. Since version 7, released in 2015, CEITON includes a time-tracking module allowing employees to enter their times from mobile devices such as tablets running Android, iPhones etc. In May 2005 CEITON won the IQ innovation award, sponsored by Siemens, in the category Excellent innovation in the IT-sector. Since 2007, CEITON has been present at the broadcast trade fairs NAB in Las Vegas and IBC in Amsterdam. In 2020, the company celebrated its 20th anniversary.
Read more →
Rclone

Rclone is an open source, multi threaded, command line computer program to manage or migrate content on cloud and other high latency storage. Its capabilities include sync, transfer, crypt, cache, union, compress and mount. The rclone website lists supported backends including S3 and Google Drive. Descriptions of rclone often carry the strapline "Rclone syncs your files to cloud storage". Those prior to 2020 include the alternative "Rsync for Cloud Storage". Rclone is well known for its rclone sync and rclone mount commands. It provides further management functions analogous to those ordinarily used for files on local disks, but which tolerate some intermittent and unreliable service. Rclone is commonly used with media servers such as Plex, Emby or Jellyfin to stream content direct from consumer file storage services. Official Ubuntu, Debian, Fedora, Gentoo, Arch, Brew, Chocolatey, and other package managers include rclone. == History == Nick Craig-Wood was inspired by rsync. Concerns about the noise and power costs arising from home computer servers prompted him to embrace cloud storage and he began developing rclone as open source software in 2012 under the name swiftsync. Rclone was promoted to stable version 1.00 in July 2014. In May 2017, Amazon Drive barred new users of rclone and other upload utilities, citing security concerns. Amazon Drive had been advertised as offering unlimited storage for £55 per year. Amazon's AWS S3 service continues to support new rclone users. The original rclone logo was updated in September 2018. In March 2020, Nick Craig-Wood resigned from Memset Ltd, a cloud hosting company he founded, to focus on open source software. Amazon's AWS April 2020 public sector blog explained how the Fred Hutch Cancer Research Center were using rclone in their Motuz tool to migrate very large biomedical research datasets in and out of AWS S3 object stores. In November 2020, rclone was updated to correct a weakness in the way it generated passwords. Passwords for encrypted remotes can be generated randomly by rclone or supplied by the user. In all versions of rclone from 1.49.0 to 1.53.2 the seed value for generated passwords was based on the number of seconds elapsed in the day, and therefore not truly random. CVE-2020-28924 recommended users upgrade to the latest version of rclone and check the passwords protecting their encrypted remotes. Release 1.55 of rclone in March 2021 included features sponsored by CERN and their CS3MESH4EOSC project. The work was EU funded to promote vendor-neutral application programming interfaces and protocols for synchronisation and sharing of academic data on cloud storage. == Backends and commands == Rclone supports the following services as backends. There are others, built on standard protocols such as WebDAV or S3, that work. WebDAV backends do not support rclone functionality dependent on server side checksum or modtime. Remotes are usually defined interactively from these backends, local disk, or memory (as S3), with rclone config. Rclone can further wrap those remotes with one or more of alias, chunk, compress, crypt or union, remotes. Once defined, the remotes are referenced by other rclone commands interchangeably with the local drive. Remote names are followed by a colon to distinguish them from local drives. For example, a remote example_remote containing a folder, or pseudofolder, myfolder is referred to within a command as a path example_remote:/myfolder. Rclone commands directly apply to remotes, or mount them for file access or streaming. With appropriate cache options the mount can be addressed as if a conventional, block level disk. Commands are provided to serve remotes over SFTP, HTTP, WebDAV, FTP and DLNA. Commands can have sub-commands and flags. Filters determine which files on a remote that rclone commands are applied to. rclone rc passes commands or new parameters to existing rclone sessions and has an experimental web browser interface. === Crypt remotes === Rclone's crypt implements encryption of files at rest in cloud storage. It layers an encrypted remote over a pre-existing, cloud or other remote. Crypt is commonly used to encrypt / decrypt media, for streaming, on consumer storage services such as Google Drive. Rclone's configuration file contains the crypt password. The password can be lightly obfuscated, or the whole rclone.conf file can be encrypted. Crypt can either encrypt file content and name, or additionally full paths. In the latter case there is a potential clash with encryption for cloud backends, such as Microsoft OneDrive, having limited path lengths. Crypt remotes do not encrypt object modification time or size. The encryption mechanism for content, name and path is available, for scrutiny, on the rclone website. Key derivation is with scrypt. === Example syntax (Linux) === These examples describe paths and file names but object keys behave similarly. To recursively copy files from directory remote_stuff, at the remote xmpl, to directory stuff in the home folder:- -v enables logging and -P, progress information. By default rclone checks the file integrity (hash) after copy; can retry each file up to three times if the operation is interrupted; uses up to four parallel transfer threads, and does not apply bandwidth throttling. Running the above command again copies any new or changed files at the remote to the local folder but, like default rsync behaviour, will not delete from the local directory, files which have been removed from the remote. To additionally delete files from the local folder which have been removed from the remote - more like the behaviour of rsync with a --delete flag:- And to delete files from the source after they have been transferred to the local directory - more like the behaviour of rsync with a --remove-source-file flag:- To mount the remote directory at a mountpoint in the pre-existing, empty stuff directory in the home directory (the ampersand at the end makes the mount command run as a background process):- Default rclone syntax can be modified. Alternative transfer, filter, conflict and backend specific flags are available. Performance choices include number of concurrent transfer threads; chunk size; bandwidth limit profiling, and cache aggression. == Academic evaluation == In 2018, University of Kentucky researchers published a conference paper comparing use of rclone and other command line, cloud data transfer agents for big data. The paper was published as a result of funding by the National Science Foundation. Later that year, University of Utah's Center for High Performance Computing examined the impact of rclone options on data transfer rates. == Rclone use at HPC research sites == Examples are University of Maryland, Iowa State University, Trinity College Dublin, NYU, BYU, Indiana University, CSC Finland, Utrecht University, University of Nebraska, University of Utah, North Carolina State University, Stony Brook, Tulane University, Washington State University, Georgia Tech, National Institutes of Health, Wharton, Yale, Harvard, Minnesota, Michigan State, Case Western Reserve University, University of South Dakota, Northern Arizona University, University of Pennsylvania, Stanford, University of Southern California, UC Santa Barbara, UC Irvine, UC Berkeley, and SURFnet. == Rclone and cybercrime == May 2020 reports stated rclone had been used by hackers to exploit Diebold Nixdorf ATMs with ProLock ransomware. The FBI issued a Flash Alert MI-000125-MW on May 4, 2020, in relation to the compromise. They issued a further, related alert 20200901–001 in September 2020. Attackers had exfiltrated / encrypted data from organisations involved in healthcare, construction, finance, and legal services. Multiple US government agencies, and industrial entities were affected. Researchers established the hackers spent about a month exploring the breached networks, using rclone to archive stolen data to cloud storage, before encrypting the target system. Reported targets included LaSalle County, and the city of Novi Sad. The FBI warned January 2021, in Private Industry Notification 20210106–001, of extortion activity using Egregor ransomware and rclone. Organisations worldwide had been threatened with public release of exfiltrated data. In some cases rclone had been disguised under the name svchost. Bookseller Barnes & Noble, US retailer Kmart, games developer Ubisoft and the Vancouver metro system have been reported as victims. An April 2021, cybersecurity investigation into SonicWall VPN zero-day vulnerability SNWLID-2021-0001 by FireEye's Mandiant team established attackers UNC2447 used rclone for reconnaissance and exfiltration of victims' files. Cybersecurity and Infrastructure Security Agency Analysis Report AR21-126A confirmed this use of rclone in FiveHands ransomware attacks. A June 2021, Microsoft Security Intelligence Twitter post identified use of rclone in BazaCall cyber attacks. The attackers sent emails e
Read more →
Cloud management

Cloud management refers to the administration and oversight of cloud computing products and services. Public clouds are managed by cloud service providers, which operate the underlying infrastructure such as servers, storage, networking, and data center facilities. Users may also opt to manage their public cloud services with a third-party cloud management tool. Users of public cloud services can generally select from three basic cloud provisioning categories: User self-provisioning: Customers purchase cloud services directly from the provider, typically through a web form or console interface. The customer pays on a per-transaction basis. Advanced provisioning: Customers contract in advance a predetermined amount of resources, which are prepared in advance of service. The customer pays a flat fee or a monthly fee. Dynamic provisioning: The provider allocates resources when the customer needs them, then decommissions them when they are no longer needed. The customer is charged on a pay-per-use basis. Managing a private cloud requires software tools to help create a virtualized pool of compute resources, provide a self-service portal for end users and handle security, resource allocation, tracking and billing. Management tools for private clouds tend to be service driven, as opposed to resource driven, because cloud environments are typically highly virtualized and organized in terms of portable workloads. In hybrid cloud environments, compute, network and storage resources must be managed across multiple domains, so a good management strategy should start by defining what needs to be managed, and where and how to do it. Policies to help govern these domains should include configuration and installation of images, access control, and budgeting and reporting. Access control often includes the use of Single sign-on (SSO), in which a user logs in once and gains access to all systems without being prompted to log in again at each of them. == Characteristics of Cloud Management == Cloud management combines software and technologies in a design for managing cloud environments. Software developers have responded to the management challenges of cloud computing with a variety of cloud management platforms and tools. These tools include native tools offered by public cloud providers as well as third-party tools designed to provide consistent functionality across multiple cloud providers. Administrators must balance the competing requirements of efficient consistency across different cloud platforms with access to different native functionality within individual cloud platforms. The growing acceptance of public cloud and increased multicloud usage is driving the need for consistent cross-platform management. Rapid adoption of cloud services is introducing a new set of management challenges for those technical professionals responsible for managing IT systems and services. Cloud-management platforms and tools should have the ability to provide minimum functionality in the following categories. Functionality can be both natively provided or orchestrated via third-party integration. Provisioning and orchestration: create, modify, and delete resources as well as orchestrate workflows and management of workloads Automation: Enable cloud consumption and deployment of app services via infrastructure-as-code and other DevOps concepts Security and compliance: manage role-based access of cloud services and enforce security configurations Service request: collect and fulfill requests from users to access and deploy cloud resources. Monitoring and logging: collect performance and availability metrics as well as automate incident management and log aggregation Inventory and classification: discover and maintain pre-existing brownfield cloud resources plus monitor and manage changes Cost management and optimization: track and rightsize cloud spend and align capacity and performance to actual demand Migration, backup, and DR: enable data protection, disaster recovery, and data mobility via snapshots and/or data replication Organizations may group these criteria into key use cases including Cloud Brokerage, DevOps Automation, Governance, and Day-2 Life Cycle Operations. Enterprises with large-scale cloud implementations may require more robust cloud management tools which include specific characteristics, such as the ability to manage multiple platforms from a single point of reference, or intelligent analytics to automate processes like application lifecycle management. High-end cloud management tools should also have the ability to handle system failures automatically with capabilities such as self-monitoring, an explicit notification mechanism, and include failover and self-healing capabilities. == Multi-Cloud and Hybrid Cloud Management Challenges == Legacy management infrastructures, which are based on the concept of dedicated system relationships and architecture constructs, are not well suited to cloud environments where instances are continually launched and decommissioned. Instead, the dynamic nature of cloud computing requires monitoring and management tools that are adaptable, extensible and customizable. Cloud computing presents a number of management challenges. Companies using public clouds do not have ownership of the equipment hosting the cloud environment, and because the environment is not contained within their own networks, public cloud customers do not have full visibility or control. Users of public cloud services must also integrate with an architecture defined by the cloud provider, using its specific parameters for working with cloud components. Integration includes tying into the cloud APIs for configuring IP addresses, subnets, firewalls and data service functions for storage. Because control of these functions is based on the cloud provider’s infrastructure and services, public cloud users must integrate with the cloud infrastructure management. Capacity management is a challenge for both public and private cloud environments because end users have the ability to deploy applications using self-service portals. Applications of all sizes may appear in the environment, consume an unpredictable amount of resources, then disappear at any time. A possible solution is profiling the applications impact on computational resources. As result, the performance models allow the prediction of how resource utilization changes according to application patterns. Thus, resources can be dynamically scaled to meet the expected demand. This is critical to cloud providers that need to provision resources quickly to meet a growing demand by their applications. Charge-back—or, pricing resource use on a granular basis—is a challenge for both public and private cloud environments. Charge-back is a challenge for public cloud service providers because they must price their services competitively while still creating profit. Users of public cloud services may find charge-back challenging because it is difficult for IT groups to assess actual resource costs on a granular basis due to overlapping resources within an organization that may be paid for by an individual business unit, such as electrical power. For private cloud operators, charge-back is fairly straightforward, but the challenge lies in guessing how to allocate resources as closely as possible to actual resource usage to achieve the greatest operational efficiency. Exceeding budgets can be a risk. Hybrid cloud environments, which combine public and private cloud services, sometimes with traditional infrastructure elements, present their own set of management challenges. These include security concerns if sensitive data lands on public cloud servers, budget concerns around overuse of storage or bandwidth and proliferation of mismanaged images. Managing the information flow in a hybrid cloud environment is also a significant challenge. On-premises clouds must share information with applications hosted off-premises by public cloud providers, and this information may change constantly. Hybrid cloud environments also typically include a complex mix of policies, permissions and limits that must be managed consistently across both public and private clouds. == Cloud Management Platforms (CMP) == CMPs provide a means for a cloud service customer to manage the deployment and operation of applications and associated datasets across multiple cloud service infrastructures, including both on-premises cloud infrastructure and public cloud service provider infrastructure. In other words, CMPs provide management capabilities for hybrid cloud and multi-cloud environments. A cloud management platform (CMP) provides broad cloud management functionality atop both public cloud provider platforms and private cloud platforms. CMPs manage cloud services and resources that are distributed across multiple cloud platforms. The value of CMPs stands in delivering the maximum level of consistency between platforms without comp
Read more →
Deconvolution

In mathematics, deconvolution is the inverse of convolution. Both operations are used in signal processing and image processing. For example, it may be possible to recover the original signal after a filter (convolution) by using a deconvolution method with a certain degree of accuracy. Due to the measurement error of the recorded signal or image, it can be demonstrated that the worse the signal-to-noise ratio (SNR), the worse the reversing of a filter will be; hence, inverting a filter is not always a good solution as the error amplifies. Deconvolution offers a solution to this problem. The foundations for deconvolution and time-series analysis were largely laid by Norbert Wiener of the Massachusetts Institute of Technology in his book Extrapolation, Interpolation, and Smoothing of Stationary Time Series (1949). The book was based on work Wiener had done during World War II but that had been classified at the time. Some of the early attempts to apply these theories were in the fields of weather forecasting and economics. == Description == In general, the objective of deconvolution is to find the solution f of a convolution equation of the form: f ∗ g = h {\displaystyle fg=h\,} Usually, h is some recorded signal, and f is some signal that we wish to recover, but has been convolved with a filter or distortion function g, before we recorded it. Usually, h is a distorted version of f and the shape of f can't be easily recognized by the eye or simpler time-domain operations. The function g represents the impulse response of an instrument or a driving force that was applied to a physical system. If we know g, or at least know the form of g, then we can perform deterministic deconvolution. However, if we do not know g in advance, then we need to estimate it. This can be done using methods of statistical estimation or building the physical principles of the underlying system, such as the electrical circuit equations or diffusion equations. There are several deconvolution techniques, depending on the choice of the measurement error and deconvolution parameters: === Raw deconvolution === When the measurement error is very low (ideal case), deconvolution collapses into a filter reversing. This kind of deconvolution can be performed in the Laplace domain. By computing the Fourier transform of the recorded signal h and the system response function g, you get H and G, with G as the transfer function. Using the convolution theorem, F = H / G {\displaystyle F=H/G\,} where F is the estimated Fourier transform of f. Finally, the inverse Fourier transform of the function F is taken to find the estimated deconvolved signal f. Note that G is at the denominator and could amplify elements of the error model if present. === Deconvolution with noise === In physical measurements, the situation is usually closer to ( f ∗ g ) + ε = h {\displaystyle (fg)+\varepsilon =h\,} In this case ε is noise that has entered our recorded signal. If a noisy signal or image is assumed to be noiseless, the statistical estimate of g will be incorrect. In turn, the estimate of ƒ will also be incorrect. The lower the signal-to-noise ratio, the worse the estimate of the deconvolved signal will be. That is the reason why inverse filtering the signal (as in the "raw deconvolution" above) is usually not a good solution. However, if at least some knowledge exists of the type of noise in the data (for example, white noise), the estimate of ƒ can be improved through techniques such as Wiener deconvolution. == Applications == === Seismology === The concept of deconvolution had an early application in reflection seismology. In 1950, Enders Robinson was a graduate student at MIT. He worked with others at MIT, such as Norbert Wiener, Norman Levinson, and economist Paul Samuelson, to develop the "convolutional model" of a reflection seismogram. This model assumes that the recorded seismogram s(t) is the convolution of an Earth-reflectivity function e(t) and a seismic wavelet w(t) from a point source, where t represents recording time. Thus, our convolution equation is s ( t ) = ( e ∗ w ) ( t ) . {\displaystyle s(t)=(ew)(t).\,} The seismologist is interested in e, which contains information about the Earth's structure. By the convolution theorem, this equation may be Fourier transformed to S ( ω ) = E ( ω ) W ( ω ) {\displaystyle S(\omega )=E(\omega )W(\omega )\,} in the frequency domain, where ω {\displaystyle \omega } is the frequency variable. By assuming that the reflectivity is white, we can assume that the power spectrum of the reflectivity is constant, and that the power spectrum of the seismogram is the spectrum of the wavelet multiplied by that constant. Thus, | S ( ω ) | ≈ k | W ( ω ) | . {\displaystyle |S(\omega )|\approx k|W(\omega )|.\,} If we assume that the wavelet is minimum phase, we can recover it by calculating the minimum phase equivalent of the power spectrum we just found. The reflectivity may be recovered by designing and applying a Wiener filter that shapes the estimated wavelet to a Dirac delta function (i.e., a spike). The result may be seen as a series of scaled, shifted delta functions (although this is not mathematically rigorous): e ( t ) = ∑ i = 1 N r i δ ( t − τ i ) , {\displaystyle e(t)=\sum _{i=1}^{N}r_{i}\delta (t-\tau _{i}),} where N is the number of reflection events, r i {\displaystyle r_{i}} are the reflection coefficients, t − τ i {\displaystyle t-\tau _{i}} are the reflection times of each event, and δ {\displaystyle \delta } is the Dirac delta function. In practice, since we are dealing with noisy, finite bandwidth, finite length, discretely sampled datasets, the above procedure only yields an approximation of the filter required to deconvolve the data. However, by formulating the problem as the solution of a Toeplitz matrix and using Levinson recursion, we can relatively quickly estimate a filter with the smallest mean squared error possible. We can also do deconvolution directly in the frequency domain and get similar results. The technique is closely related to linear prediction. === Optics and other imaging === In optics and imaging, the term "deconvolution" is specifically used to refer to the process of reversing the optical distortion that takes place in an optical microscope, electron microscope, telescope, or other imaging instrument, thus creating clearer images. It is usually done in the digital domain by a software algorithm, as part of a suite of microscope image processing techniques. Deconvolution is also practical to sharpen images that suffer from fast motion or jiggles during capturing. Early Hubble Space Telescope images were distorted by a flawed mirror and were sharpened by deconvolution. The usual method is to assume that the optical path through the instrument is optically perfect, convolved with a point spread function (PSF), that is, a mathematical function that describes the distortion in terms of the pathway a theoretical point source of light (or other waves) takes through the instrument. Usually, such a point source contributes a small area of fuzziness to the final image. If this function can be determined, it is then a matter of computing its inverse or complementary function, and convolving the acquired image with that. The result is the original, undistorted image. In practice, finding the true PSF is impossible, and usually an approximation of it is used, theoretically calculated or based on some experimental estimation by using known probes. Real optics may also have different PSFs at different focal and spatial locations, and the PSF may be non-linear. The accuracy of the approximation of the PSF will dictate the final result. Different algorithms can be employed to give better results, at the price of being more computationally intensive. Since the original convolution discards data, some algorithms use additional data acquired at nearby focal points to make up some of the lost information. Regularization in iterative algorithms (as in expectation-maximization algorithms) can be applied to avoid unrealistic solutions. When the PSF is unknown, it may be possible to deduce it by systematically trying different possible PSFs and assessing whether the image has improved. This procedure is called blind deconvolution. Blind deconvolution is a well-established image restoration technique in astronomy, where the point nature of the objects photographed exposes the PSF thus making it more feasible. It is also used in fluorescence microscopy for image restoration, and in fluorescence spectral imaging for spectral separation of multiple unknown fluorophores. The most common iterative algorithm for the purpose is the Richardson–Lucy deconvolution algorithm; the Wiener deconvolution (and approximations) are the most common non-iterative algorithms. For some specific imaging systems such as laser pulsed terahertz systems, PSF can be modeled mathematically. As a result, as shown in the figure, deconvolution of the modeled PS
Read more →
Inbox by Gmail

Inbox by Gmail was an email service developed by Google. Announced on a limited invitation-only basis on October 22, 2014, it was officially released to the public on May 28, 2015. Inbox was shut down by Google on April 2, 2019. Available on the web, and through mobile apps for Android and iOS, Inbox by Gmail aimed to improve email productivity and organization through several key features. Bundles gathered emails on the same topic together; highlighted surface key details from messages, reminders and assists; and a "snooze" functionality enabled users to control when specific information would appear. Updates to the service enabled an "undo send" feature; a "Smart Reply" feature that automatically generated short reply examples for certain emails; integration with Google Calendar for event organization, previews of newsletters; and a "Save to Inbox" feature that let users save links for later use. Inbox by Gmail received generally positive reviews. At its launch, it was called "minimalist and lovely, full of layers and easy to navigate", with features deemed helpful in finding the right messages—one reviewer noted that the service felt "a lot like the future of email". However, it also received criticism, particularly for a low density of information, algorithms that needed tweaking, and because the service required users to "give up the control" of organizing their own email, meaning that "Anyone who already has a system for organizing their emails will likely find themselves fighting Google's system". Google noted in March 2016 that 10% of all replies on mobile originated from Inbox's Smart Reply feature. Google announced it would discontinue Inbox by Gmail in March 2019, with many of its features integrated into Gmail proper. == Features == Inbox by Gmail scanned the user's incoming Gmail messages for information. It gathered email messages related to the same overall topic into an organized bundle, with a title describing the bundle's content. For example, flight tickets, car rentals, and hotel reservations were grouped under "Travel", giving the user an easier overview of emails. Users could also group emails together manually, to "teach" the Inbox how the user worked. The service highlighted key details and important information in messages, such as flight itineraries, event information, photos and documents. Inbox could retrieve updated information from the Internet, including the real-time status of flights and package deliveries. Users could set reminders to bring up important messages later. When a user needed particular information, Inbox could assist the user by displaying the necessary details. Where Inbox highlights information was not needed immediately, users could "snooze" a message or reminder, with options to make the information reappear at a later time or specific location. In June 2015, Google added an "Undo Send" feature to Inbox, giving the user 10 seconds to undo sending a message. In November 2015, Google added "Smart Reply" functionality to the mobile apps. With Smart Reply, Inbox determined which emails could be answered with a short reply, generating three example responses from which the user could select one with a single tap. Smart Reply (initially available only on the Android and iOS mobile apps) was added to the Inbox website in March 2016, Google announcing that "10% of all your replies on mobile already use Smart Reply". By May 2017, Google said Smart Reply was driving about 12% of replies in inbox on mobile. In April 2016, Google updated Inbox with three new features; Google Calendar event organization, newsletter previews, and a "Save to Inbox" functionality that let the user save links for later use, rather than having to email links to themselves. In December 2017, Google introduced an "Unsubscribe" card that let users easily unsubscribe from mailing lists. The card appeared for email messages (from specific senders) that the user had not opened for a month. A few popular Inbox by Gmail features were subsequently added to Gmail: "Snoozing" of emails Nudges: Gmail could move old messages back to the top of the inbox when it thought a follow up or reply might be required. Hover actions: Placing the mouse cursor over a certain part of the message could quickly effect an action, such as archiving, without its being opened. Smart reply: This feature employed boilerplate text to suggest appropriate replies. Google reportedly wished, at a time then to be decided, to add the "bundles" feature to Gmail, which at the time was available only in Inbox for Gmail. By March 2020, many Inbox features were still missing from Gmail. == Platforms == Inbox by Gmail was announced on a limited invitation-only basis on October 22, 2014, available on the web, and through the Android and iOS mobile operating systems. It was officially released to the public on May 28, 2015. == Reception == David Pierce of The Verge praised the service, writing that it was "minimalist and lovely, full of layers and easy to navigate. It's remarkably fast and smooth on all platforms, and far better on iOS than the Gmail app". However, he criticized the app's low density of information, with only a few emails visible on the screen at a time, making it "a bit of a challenge" for users who need to go through "hundreds of emails" every day. Although positive that "Inbox feels a lot like the future of email", Pierce wrote that there was "plenty of algorithm tweaking and design condensing to do", with particular attention needed on a "compact view" for denser view of information on the screen. Sarah Mitroff of CNET also praised Inbox, writing, "Not only is it visually appealing, it's also full of features that help you find every message you need, when you need it". She added that users must "give up the control" to organize their email, and that it "won't vibe with everyone", but admitted that "if you're willing ... the app will reward you with a smarter and cleaner inbox." Mitroff noted that, initially, users had to coach the app about which bundle was appropriate for certain emails, writing, "It's a tedious process at first, by [sic] in just a few days Inbox starts to get it right." Regarding any downsides of the service, Mitroff wrote that "Inbox has a built-in strategy for managing your emails that works best on its own. Anyone who already has a system for organizing their emails will likely find themselves fighting Google's system". == Discontinuation and legacy == Google ended the service in March 2019. Google called Inbox "a great place to experiment with new ideas" and noted that many of those ideas had been migrated to Gmail. The company wanted, going forward, to focus its resources on a single email system. Several services, like Shortwave, attempted to resurrect some of the features of Inbox by Gmail to attract its old users. Similarly, Inbox Reborn, an actively maintained browser extension developed by a team of volunteer developers from around the world since 2018, aims to recreate the core features and visual style of Inbox by Gmail within the standard Gmail interface. The project continues to focus on preserving functionalities such as email bundling and streamlined workflows to provide users with a familiar productivity experience. Afterwards, most people moved to Spark, Spike, or Newton. According to a product manager at Google, a "more focused approach" regarding email was the companies goal. This is likely the reason they moved away from Inbox.
Read more →
Trazzler

Trazzler is a travel destination app that specializes in unique and local destinations. The initial concept was developed by Adam Rugel and Biz Stone in 2006 at Twitter's original offices under the name "71 miles". More than 10,000 writers and photographers have contributed and more than $350,000 in freelance contracts have been issued as a result of Trazzeler's weekly writing and photography contests. Investors in the company include SV Angel, AOL Founder Steve Case, and the Twitter founders, Evan Williams, Jack Dorsey, and Biz Stone. The company's partners are the City of Chicago, Hawaii Tourism Authority, Fairmont Hotels & Resorts, Salon.com, and Air New Zealand. Trazzler is designed for use on the iOS, Android, and Facebook.
Read more →
Poop Map

Poop Map is a social app where users can track on a map where and when they defecate. In addition to logging location and time of each bowel movement, users can also add a photo, "like" other users' logs, and rate each account. The social elements of the app allow for groups of users to create a competitive league. Certain behaviors unlock achievements in-app. == Development == The app was created by app developer Nino Uzelac. It was launched in July 2013. == Popularity == The app charted at number one on the Apple App Store charts in 2021 after going viral on TikTok. As of September 2024, the app has a 4.8 rating on the App Store and more than 58,000 ratings. It also has more than one million downloads on the Google Play Store. Poop Map is notably popular among hikers, and has been written about in the outdoors magazine Outside.
Read more →
Dave's Redistricting

Dave's Redistricting App (DRA) is an online web app originally created by Dave Bradlee that allows anyone to simulate redistricting a U.S. state's congressional and legislative districts. == Purpose == According to Bradlee, the software was designed to "put power in people's hands," and so that they "can see how the process works, so it's a little less mysterious than it was 10 years ago." Bradlee has noticed that many citizens are taking this process seriously and using his app to create legitimate redistricting maps that could be put in place. Some websites have called Bradlee the pioneer and cause of the rise of do-it-yourself redistricting. States such as Montana in 2021 allowed the general population to use it to submit redistricting proposals following the 2020 United States Census. Dave's Redistricting has frequently been mentioned as a resource that can be used to combat gerrymandering, given that the public has free access to it. Political science firms such as FiveThirtyEight have used the website to draw examples of gerrymandered districts, including on their famous Atlas of Redistricting. Dave Bradlee built the first generation of DRA. DRA 2020 is built by a small team of volunteers—Dave Bradlee, Terry Crowley, Alec Ramsay, and David Rinn—all with a shared passion for technology & democracy and all Microsoft veterans. Their mission is to empower civic organizations and citizen activists to advocate for fair congressional and legislative districts and increased transparency in the redistricting process. == Functions == Users can redraw the congressional and state legislative districts for all 50 states, the District of Columbia, and Puerto Rico using a variety of census and election datasets including Cook PVI. Maps can be optimized for different criteria. DRA 2020 added several major features to the first generation app: Sharing & collaborative editing of maps, like Google Docs Multiple statewide elections for all 50 states including the ability to import your own data Comprehensive analytics for evaluating and comparing maps Custom overlays, and Block-level editing DRA remains free to use. == Versions == 2.2: This uses Bing Maps, an outdated software that projects the districts of a single state onto a map of the United States. 2.5: After Bing Maps announced that it would no longer be updating for the foreseen future, the U.S. Map feature was removed. DRA 2020: At the end of 2018, a beta version of 2020 was released. This version that did not require Microsoft Silverlight and could be used in any web browser. DRA 2020 has been under continuous development since and is built using React (JavaScript library), Mapbox, OpenStreetMap, TypeScript, Node.js, Amazon Web Services, as well as many open source components, tools, and icons.
Read more →
Apache Hama

Apache Hama is a distributed computing framework based on bulk synchronous parallel computing techniques for massive scientific computations e.g., matrix, graph and network algorithms. Originally a sub-project of Hadoop, it became an Apache Software Foundation top level project in 2012. It was created by Edward J. Yoon, who named it (short for "Hadoop Matrix Algebra"), and Hama also means hippopotamus in Yoon's native Korean language (하마), following the trend of naming Apache projects after animals and zoology (such as Apache Pig). Hama was inspired by Google's Pregel large-scale graph computing framework described in 2010. When executing graph algorithms, Hama showed a fifty-fold performance increase relative to Hadoop. Retired in April 2020, project resources are made available as part of the Apache Attic. Yoon cited issues of installation, scalability, and a difficult programming model for its lack of adoption. == Architecture == Hama consists of three major components: BSPMaster, GroomServers and Zookeeper. === BSPMaster === BSPMaster is responsible for: Maintaining groom server status Controlling super steps in a cluster Maintaining job progress information Scheduling jobs and assigning tasks to groom servers Disseminating execution class across groom servers Controlling fault Providing users with the cluster control interface. A BSP Master and multiple grooms are started by the script. Then, the bsp master starts up with a RPC server for groom servers. Groom servers starts up with a BSPPeer instance and a RPC proxy to contact the bsp master. After started, each groom periodically sends a heartbeat message that encloses its groom server status, including maximum task capacity, unused memory, and so on. Each time the BSP master receives a heartbeat message, it brings the groom server status up-to-date. The bsp master makes use of groom servers' status in order to assign tasks to idle groom servers - and returns a heartbeat response containing assigned tasks and others actions for a groom server to do. Currently BSP master has a FIFO job scheduler and simple task assignment algorithms. === GroomServer === A groom server (shortly referred to as groom) is a process that performs BSP tasks assigned by BSPMaster. Each groom contacts the BSPMaster, and it takes assigned tasks and reports its status by means of periodical piggybacks with BSPMaster. Each groom is designed to run with HDFS or other distributed storages. Basically, a groom server and a data node should be run on one physical node. === Zookeeper === A Zookeeper is used to manage the efficient barrier synchronisation of the BSPPeers.
Read more →
1.58-bit large language model

A 1.58-bit large language model (also known as a ternary LLM) is a type of large language model (LLM) designed to be computationally efficient. It achieves this by using weights that are restricted to only three values: -1, 0, and +1. This restriction significantly reduces the model's memory footprint and allows for faster processing, as computationally expensive multiplication operations can be replaced with lower-cost additions. This contrasts with traditional models that use 16-bit floating-point numbers (FP16 or BF16) for their weights. Studies have shown that for models up to several billion parameters, the performance of 1.58-bit LLMs on various tasks is comparable to their full-precision counterparts. This approach could enable powerful AI to run on less specialized and lower-power hardware. The name "1.58-bit" comes from the fact that a system with three states contains log 2 ⁡ 3 ≈ 1.58 {\displaystyle \log _{2}3\approx 1.58} bits of information. These models are sometimes also referred to as 1-bit LLMs in research papers, although this term can also refer to true binary models (with weights of -1 and +1). == BitNet == In 2024, Ma et al., researchers at Microsoft, declared that their 1.58-bit model, BitNet b1.58 is comparable in performance to the 16-bit Llama 2 and opens the era of 1-bit LLM. BitNet creators did not use the post-training quantization of weights but instead relied on the new BitLinear transform that replaced the nn.Linear layer of the traditional transformer design. In 2025, Microsoft researchers had released an open-weights and open inference code model BitNet b1.58 2B4T demonstrating performance competitive with the full precision models at 2B parameters and 4T training tokens. == Post-training quantization == BitNet derives its performance from being trained natively in 1.58 bit instead of being quantized from a full-precision model after training. Still, training is an expensive process and it would be desirable to be able to somehow convert an existing model to 1.58 bits. In 2024, HuggingFace reported a way to gradually ramp up the 1.58-bit quantization in fine-tuning an existing model down to 1.58 bits. == Critique == Some researchers point out that the scaling laws of large language models favor the low-bit weights only in case of undertrained models. As the number of training tokens increases, the deficiencies of low-bit quantization surface.
Read more →
Django (web framework)

Django ( JANG-goh; sometimes stylized as django) is a free and open-source, Python-based web framework that runs on a web server. It follows the model–template–views (MTV) architectural pattern. It is maintained by the Django Software Foundation (DSF), an independent organization established in the US as a 501(c)(3) non-profit. Django's primary goal is to ease the creation of complex, database-driven websites. The framework emphasizes reusability and "pluggability" of components, less code, low coupling, rapid development, and the principle of don't repeat yourself. Python is used throughout, even for settings, files, and data models. Django also provides an optional administrative create, read, update and delete interface that is generated dynamically through introspection and configured via admin models. Some well-known sites that use Django include Instagram, Mozilla, Disqus, Bitbucket, Nextdoor, and Clubhouse. == History == Django was created in the autumn of 2003, when the web programmers at the Lawrence Journal-World newspaper, Adrian Holovaty and Simon Willison, began using Python to build applications. Jacob Kaplan-Moss was hired early in Django's development shortly before Willison's internship ended. It was released publicly under a BSD license in July 2005. The framework was named after guitarist Django Reinhardt. Holovaty is a romani jazz guitar player inspired in part by Reinhardt's music. In June 2008, it was announced that a newly formed Django Software Foundation (DSF) would maintain Django in the future. == Features == === Components === Despite having its own nomenclature, such as naming the callable objects generating the HTTP responses "views", the core Django framework can be seen as an MVC architecture. It consists of an object-relational mapper (ORM) that mediates between data models (defined as Python classes) and a relational database ("Model"), a system for processing HTTP requests with a web templating system ("View"), and a regular-expression-based URL dispatcher ("Controller"). Also included in the core framework are: a lightweight and standalone web server for development and testing a form serialization and validation system that can translate between HTML forms and values suitable for storage in the database a template system that utilizes the concept of inheritance borrowed from object-oriented programming a caching framework that can use any of several cache methods support for middleware classes that can intervene at various stages of request processing and carry out custom functions an internal dispatcher system that allows components of an application to communicate events to each other via pre-defined signals an internationalization system, including translations of Django's own components into a variety of languages a serialization system that can produce and read XML and/or JSON representations of Django model instances a system for extending the capabilities of the template engine an interface to Python's built-in unit test framework === Bundled applications === The main Django distribution also bundles a number of applications in its "contrib" package, including: an extensible authentication system the dynamic administrative interface tools for generating RSS and Atom syndication feeds a "Sites" framework that allows one Django installation to run multiple websites, each with their own content and applications tools for generating Sitemaps built-in mitigation for cross-site request forgery, cross-site scripting, SQL injection, password cracking and other typical web attacks, most of them turned on by default a framework for creating geographic information system (GIS) applications === Extensibility === Django's configuration system allows third-party code to be plugged into a regular project, provided that it follows the reusable app conventions. More than 5000 packages are available to extend the framework's original behavior, providing solutions to issues the original tool didn't tackle: registration, search, API provision and consumption, CMS, etc. This extensibility is, however, mitigated by internal components' dependencies. While the Django philosophy implies loose coupling, the template filters and tags assume one engine implementation, and both the auth and admin bundled applications require the use of the internal ORM. None of these filters or bundled apps are mandatory to run a Django project, but reusable apps tend to depend on them, encouraging developers to keep using the official stack in order to benefit fully from the apps ecosystem. === Server arrangements === Django can be run on ASGI or WSGI-compliant web servers. Django officially supports five database backends: PostgreSQL, MySQL, MariaDB, SQLite, and Oracle. Microsoft SQL Server can be used with mssql-django. == Version history == The Django team will occasionally designate certain releases to be "long-term support" (LTS) releases. LTS releases will get security and data loss fixes applied for a guaranteed period of time, typically 3+ years, regardless of the pace of releases afterwards. == Community == === DjangoCon === There is a semiannual conference for Django developers and users, named "DjangoCon", that has been held since September 2008. DjangoCon is held annually in Europe, in May or June; while another is held in the United States in August or September, in various cities. ==== United States ==== The 2012 DjangoCon took place in Washington, D.C., from September 3 to 8. 2013 DjangoCon was held in Chicago at the Hyatt Regency Hotel and the post-conference Sprints were hosted at Digital Bootcamp, computer training center. The 2014 DjangoCon US returned to Portland, OR from August 30 to 6 September. The 2015 DjangoCon US was held in Austin, TX from September 6 to 11 at the AT&T Executive Center. The 2016 DjangoCon US was held in Philadelphia, PA at The Wharton School of the University of Pennsylvania from July 17 to 22. The 2017 DjangoCon US was held in Spokane, WA; in 2018 DjangoCon US was held in San Diego, CA. DjangoCon US 2019 was held again in San Diego, CA from September 22 to 27. DjangoCon 2021 took place virtually and in 2022, DjangoCon US returned to San Diego from October 16 to 21. DjangoCon US 2023 was held from October 16 to 20 at the Durham, NC convention center and DjangoCon US 2024 took place also in Durham in September 22 to 27. DjangoCon US 2025 was held from September 8 to 12 in Chicago, Illinois. ==== Europe ==== The 2025 edition of DjangoCon Europe took place in Dublin, Ireland from 23 to 27 April. In 2024, the conference was hosted in Vigo, Spain. Edinburgh, Scotland served as the venue for DjangoCon Europe in 2023. The 2022 conference was organized in Porto, Portugal. In 2021, DjangoCon Europe was held virtually due to the COVID-19 pandemic. The 2020 edition was also conducted as a fully virtual event. DjangoCon Europe 2019 was held in Copenhagen, Denmark. In 2018, the event took place in Heidelberg, Germany. The 2017 conference was convened in Florence, Italy. DjangoCon Europe 2012 was organized in Zurich, Switzerland. ==== Australia ==== Django mini-conferences are usually held every year as part of the Australian Python Conference 'PyCon AU'. Previously, these mini-conferences have been held in: Hobart, Australia, in July 2013, Brisbane, Australia, in August 2014 and 2015, Melbourne, Australia in August 2016 and 2017, and Sydney, Australia, in August 2018 and 2019. ==== Africa ==== The first DjangoCon Africa was held in Zanzibar, Tanzania, from 6 to 11 November 2023. The event hosted approximately 200 attendees from 22 countries, including 103 women. The conference featured 26 talks on topics such as software development, education, careers, accessibility, and agriculture, often highlighting perspectives from across the African continent. Future editions of the conference are planned, with details available on the official website === Community groups & programs === Django has spawned user groups and meetups around the world, a notable group is the Django Girls organization, which began in Poland but now has had events in 91 countries. Another initiative is Djangonaut Space, a mentorship program aimed at supporting new contributors to the Django ecosystem. The program pairs experienced mentors with developers to guide them through making meaningful contributions to Django and its community. It emphasizes long-term engagement, inclusion, and collaborative open-source development. == Ports to other languages == Programmers have ported Django's template engine design from Python to other languages, providing decent cross-platform support. Some of these options are more direct ports; others, though inspired by Django and retaining its concepts, take the liberty to deviate from Django's design: Liquid for Ruby Template::Swig for Perl Twig for PHP and JavaScript Jinja for Python ErlyDTL for Erlang == CMSs based on Django Framework == Django as a framework is capable of building a complete CMS
Read more →
Unit of work

A unit of work is a behavioral pattern in software development. Martin Fowler has defined it as everything one does during a business transaction which can affect the database. When the unit of work is finished, it will provide everything that needs to be done to change the database as a result of the work. A unit of work encapsulates one or more code repositories[de] and a list of actions to be performed which are necessary for the successful implementation of self-contained and consistent data change. A unit of work is also responsible for handling concurrency issues, and can be used for transactions and stability patterns.[de]
Read more →