AI Art Prints

AI Art Prints — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  ISO/IEC JTC 1/SC 24

  ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of computer graphics, image processing, and environmental data representation. The international secretariat of ISO/IEC JTC 1/SC 24 is the British Standards Institute (BSI) located in the United Kingdom. == History == ISO/IEC JTC 1/SC 24 was formed in 1987 from ISO/TC 97 as a result of Resolution 21 at the ISO/IEC JTC 1 plenary. The group's origins began in computer graphics, the standardization of which was originally under ISO/IEC JTC 1/SC 21/WG 2. However, when ISO/IEC JTC 1/SC 24 was created, the standardization activity of ISO/IEC JTC 1/SC 21/WG 2 was carried over to the new subcommittee. The initial five working groups of ISO/IEC JTC 1/SC 24 were titled, “Architecture,” “Application programming interfaces,” “Metafiles and interfaces,” “Language bindings,” and “Validation, testing and registration.” The work of ISO/IEC JTC 1/SC 24 began with the Graphical Kernel System (GKS), which was adopted from ISO/IEC JTC 1/SC 21/WG 2. However, since GKS only addressed 2D functionality, attention turned to the standardization of 3D functionality. This resulted in two standards being published: GKS-3D in 1988 and PHIGS in 1989, both of which addressed 3D functionality. Since 1991, ISO/IEC JTC 1/SC 24 has held plenaries in a number of countries, including the Netherlands, Germany, United States, France, Canada, Japan, Sweden, Korea, United Kingdom, Australia, and Czech Republic. == Scope == The scope of ISO/IEC JTC 1/SC 24 is the “Standardization of interfaces for information technology based applications relating to”: Computer graphics Image processing Environmental data representation Support for the Mixed and Augmented Reality (MAR) Interaction with, and visual representation of, information Included are the following related areas: Modeling and simulation and related reference models Virtual reality with accompanying augmented reality/augmented virtuality aspects and related reference models Application program interfaces Functional specifications Representation models Interchange formats, encodings and their specifications, including metafiles Device interfaces Testing methods Registration procedures Presentation and support for creation of multimedia, hypermedia, and mixed reality documents Excluded are the following areas: Character and image coding Coding of multimedia, hypermedia, and mixed reality document interchange formats JTC 1 work in user system interfaces and document presentation ISO/TC 207 work on ISO 14000 environment management, ISO/TC 211 work on geographic information and geomatics Software environments as described by ISO/IEC JTC 1/SC 22 == Structure == ISO/IEC JTC 1/SC 24 is made up of four active working groups, each of which carries out specific tasks in standards development within the field of computer graphics, image processing and environmental data representation, together with ITU-T Study Group 16. As a response to changing standardization needs, working groups of ISO/IEC JTC 1/SC 24 can be disbanded if their area of work is no longer applicable, or established if new working areas arise. The focus of each working group is described in the group's terms of reference. Active working groups of ISO/IEC JTC 1/SC 24 are: == Collaborations == ISO/IEC JTC 1/SC 24 works in close collaboration with a number of other organizations or subcommittees, both internal and external to ISO or IEC, in order to avoid conflicting or duplicative work. Organizations internal to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: ISO/IEC JTC 1/WG 7, Sensor Networks ISO/IEC JTC 1/SC 29, Coding of audio, picture, multimedia and hypermedia information ISO/IEC JTC 1/SC 32, Data management and interchange ISO/TAG 14, Imagery and technology ISO/TC 130, Graphic Technology ISO/TC 184/SC 4, Industrial data ISO/TC 211, Geographic information/Geomatics ISO/TC 215, Health informatics IEC TC 100, Audio, video and multimedia system and equipment Some organizations external to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: Defence Geospatial Information Working Group (DGIWG) Digital Imaging and Communications in Medicine (DICOM) International Hydrographic Organization (IHO) The Khronos Group NATO - Joint Intelligence Surveillance and Reconnaissance Capability Group (JISRCG) OMG Robotics DTF Open CGM Open Geospatial Consortium (OGC) SEDRIS Organization Simulation Interoperability Standards Organization (SISO) US National Imagery Transmission Format Standard (NITFS) Technical Board (US NTB) Web3D Consortium World Intellectual Property Organization (WIPO) World Wide Web Consortium (W3C) == Member countries == Countries pay a fee to ISO to be members of subcommittees. The 11 "P" (participating) members of ISO/IEC JTC 1/SC 24 are: Australia, China, Egypt, France, India, Japan, Republic of Korea, Portugal, Russian Federation, United Kingdom, and United States. The 22 "O" (observer) members of ISO/IEC JTC 1/SC 24 are: Argentina, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Canada, Cuba, Czech Republic, Finland, Ghana, Hungary, Iceland, Indonesia, Islamic Republic of Iran, Italy, Kazakhstan, Malaysia, Poland, Romania, Serbia, Slovakia, Switzerland, and Thailand. == Published standards == ISO/IEC JTC 1/SC 24 currently has 80 published standards under their direct responsibility within the field of computer graphics, image processing, and environmental data representation, including:

  Read more →
• 

  Packard Bell Statesman

  The Packard Bell Statesman was an economy line of notebook-sized laptops introduced in 1993 by Packard Bell. They were slower in performance and lacked features compared to most competitor products, but they were lower in price. It was created in a collaboration between Packard Bell and Zenith Data Systems. The Statesman series was essentially a rebrand of Zenith Data Systems Z-Star 433 series, with the only notable difference of the logo in the middle and text on the front bezel. == History == In June 1993 Zenith Data Systems announced an alliance with Packard Bell. Zenith acquired about 20% of Packard Bell and they would both now work together to design and build PC's. Zenith would also provide Packard Bell with private-label versions of their portable PC's. The Packard Bell Statesman was a rebrand of the Zenith Z-Star notebook computer series. While the Statesman was being advertised by Packard Bell, the Z-Star series was also still being sold by Zenith. The Statesman was first introduced on October 4, 1993. Prices started at $1,500 for a monochrome or color DSTN model with a 33 MHz Cyrix Cx486SLC, 4 MB of RAM, 200 MB hard disk drive, internal 1.44 MB floppy disk drive, and MS-DOS 6.0 with Windows 3.1 for the included software. A "J mouse" pointing device was included, similar to the TrackPoint. The Statesman was expected to begin shipping within the next few weeks. == Specifications == === Hardware === CPU The first two models, the 200M and 200C, used the Cyrix Cx486SLC. This was Cyrix's first processor, which was a 386SX pin-compatible chip with on-board L1 cache and 486 instructions, being known as a "hybrid chip". The processor was clocked at 33 MHz and had 1 KB of L1 cache. It was a 16-bit processor and was pin compatible with the Intel 80386SX. On the bottom of the unit, the motherboard had an empty socket for a Cyrix FasMath co-processor, which could improve floating-point math performance. The 200M and 200C plus models had a Cyrix Cx486SLC2 clocked at 50 MHz, which was 50% faster than the original 486SLC. The SLC2 similarly had 1 KB of on-board cache and was pin compatible with the previous model. Graphics & Display For video all models used three versions of the Chips & Technologies 655xx, the CT65520, 65525, and 65530. The 65520 was first introduced in early 1992 as the first controller with Super VGA resolution. It supported resolutions up to 1024x768 in 16 colors or shades of gray. If in 800x600 resolution, it can display up to 256 colors. All 3 chips were the same, with the CT65525 identifying as a CT65530. The CT65530 had an ability of 5V and 3.3V mixed operation and linear video memory addressing. All models used a 9.5in 800x600 resolution DSTN LCD. The 200M and 200M Plus had a monochrome display, while the 200C and 200C Plus had a color display. Audio All models had only basic audio available, with just a piezo speaker soldered onto the motherboard and no sound controller. Memory Standard RAM included was 4-8 MB of EDO RAM. The RAM was on a proprietary SIPP package that could only be upgraded to 12 MB maximum if the user had compatible modules. Storage For storage all models used a hard drive with a size of 100 or 200 MB, and all models had an internal 1.44 MB floppy disk drive located on the side of the unit. The maximum capacity hard drive compatible if the user wanted to upgrade was 500 MB.Ports & Expansion For ports all models had 1x serial, 1x parallel, 1x VGA output, and 1x PS/2 keyboard/mouse input. For expansion all models only had one PCMCIA type II slot. Keyboard & Mouse All models used a small-scale keyboard with control keys. One interesting feature of the keyboard is that the J key also acted as a mouse, working similar to IBM's ThinkPad TrackPoint. On some models additional keys such as S, D, F, G and space let you do other mouse actions such as right click, left click, double click, and middle mouse click. === Software === The series shipped with MS-DOS and Windows 3.1 as the included operating system. == Model Comparison == Statesman 200M — The first Statesman model, it came with a DSTN monochrome screen, and a Nickel-cadmium battery pack which could last up to 4 hours. It weighed 7.4 lb and was $1500. Statesman 200C — The second Statesman model, it was the same as the 200M with the only notable differences of a DSTN color display rather than monochrome and a slightly decreased battery life of about 3 hours. It cost $700 more than the 200M at $2200. Statesman 200M/200C Plus — The 200M/200C Plus were both identical to their previous base models, with the only difference of them having a Cx486SLC2 running at 50 MHz. In 1994 it cost around $2,295 for the 200C plus with 4 MB of ram, with 8 MB costing an extra $400. == Reception == The Statesman received fair reception, with most reviewers giving positivity for the low price and high battery life, but mainly criticizing the performance and screen quality of the model line. A review by PC World writer Rex Farrance and Owen Linderholm said the 200M had a good price, being only $1500, and a good battery life which lasted about 4 hours. In benchmarks however, the 200M performed "noticeably below the average". It was noted that the 200M's worst feature was its monochrome display, being "cloudy and a bit dim for our tastes". The J mouse was considered a decent choice, and was said to be "highly usable" after some practice. The 200M was listed as number 3 on PC World's top 20 budget PC list. PC World also reviewed the 200C, saying the color display is only a "marginal, although an improvement on the monochrome version". The 200C placed 9 on the PC World top 20 budget PC list. Compute! Magazine reviewed the 200C Plus in September 1994 stating it "lagged far behind the others, especially the DXs, but then speed isn't everything". It was given pros for low cost and good display, but criticized for its low performance, not having a trackball, and poor external monitor support.

  Read more →
• 

  Amino (app)

  Amino was a social media application originally developed by Narvii, Inc. It was originally created by Yin Wang and Ben Anderson in 2010, and then launched as an app in 2012. Amino was acquired by MediaLab AI Inc in January 2021, and the founders are no longer associated with the application. The platform ceased all operations in December 2025. == History == In 2010, Wang and Anderson came up with the idea for a convention-like community while attending an anime convention in Boston, Massachusetts. Later that year, they would release two apps revolving around K-pop and photography that allowed fans of those subjects to chat freely. That same year, Amino was officially released. === Shutdown === In early December 2025, the Amino platform abruptly stopped all operations. Users worldwide lost access to the mobile application and website, with server requests returning connection time-out errors. Parent company MediaLab AI has issued no official statement regarding the cause to date, or declared any possible cause behind it. === Final Message === According to Shawn, a member of Amino support, Amino has ceased operations as of December 19th. The message that was sent out from Shawn reads: "Hey there, Thanks for your message. Amino has ceased operations. As of December 19th, we no longer retain personal data relating to you. Accordingly, we are unable to provide a copy of your data. Kind regards, - Amino Support" This message was sent on January 4th, 2026. This was the final support message sent from the Amino Support mail. == Growth == Amino received 1.65 million dollars of seed funding in 2014, primarily from Union Ventures. Some additional seed investors include Google Ventures, SV Angel, Box Group, and other interested parties. By July 2014, Amino's apps were downloaded 500,000 times. Though only having 15 communities at that time, Amino eventually grew to have 41 communities in September 2015. Amino's apps had been downloaded 13 million times by July 2016. Fandoms had migrated from websites like Facebook and Reddit to Amino, partly because of the app's mobile-native experience. Before 2016, when a user wanted to join a new Amino, they had to download another app for the Amino they wanted to join, with each apps name beginning with "Amino for:". In 2016, Amino Apps launched a centralized portal that hosted every Amino community in one app, meaning users no longer had to download multiple apps. In July of the same year, ACM, an app that allowed users to create their own communities, was launched. This resulted in the number of communities on Amino skyrocketing to over 2.5 million as of June 2018. == Features == The main feature of Amino was communities dedicated to a certain topic that users could join. Users could also chat with other members of a community in three ways: text, voice, or screening room, which allowed users to watch videos together while voice chatting. Other features include polls, blog posts, image posts, wiki entries, stories, and quizzes. In some cases, posts that were very well-made and had been noticed by a community's administration would end up receiving a feature, making it appear on the front page along with other featured content. In 2018, a premium membership option called Amino+ was added. Amino+ comes with additional features such as exclusive stickers, the ability to make stickers, custom chat bubbles, high resolution images, and other perks. Membership can now only be purchased with money. Amino coins can be purchased or earned through enabling ads, watching ad videos, completing activities on the Offer Wall, and playing Lucky Draw when checking in, but are of little use due to the users not being able to buy Amino+ by amino coins anymore. Members can give and receive coins through props. In 2019, Amino introduced six original short-form animated series, labelled "Amino Originals," produced by independent artists from across the internet. ATJ's "Little Red," a re-imagining of Little Red Riding Hood, premiered on November 15, 2019. "Little Red" was joined by five other shows in late December. Sophie Feher's "The Reef," a comedy featuring an aspiring marine biologist meeting a merman, premiered on December 27 alongside "Princely," an LGBT fairy tale created by Matt Bruneau-Richardson of Tiny Siren Animation. "Spaced Out," an alien abduction comedy by Michael Jae, and YouTuber Alex Clark's "Wyndvania II" premiered on December 28. Mysie Pereira's fairy tale "Turned to Stone" and Marcin Pawlowski's "Stranded" premiered on December 29, 2019. == Administration == On each community, there are two types of staff members, these being ‘Leader’ and ‘Curator.’ Leaders are higher rank than curators. Curators are usually the ones who feature posts, or post important announcements for users to see. Curators are able to disable a post or public chat, delete comments or chat threads, manage featured content, manage posts in topic categories, and approve Wiki entries. Leaders have more power than curators. In addition to curator powers, leaders can submit a community to be listed, change the Amino's features, change navigation, alter the community appearance, change the Amino's privacy settings, manage the Amino's join requests, send invites, appoint or demote Curators, strike or ban members, manage flagged content, change users' custom titles, manage topics and wiki categories, and create broadcasts (notifications sent for posts). One leader will have the status of agent. An agent is the primary leader of a community; the person who created the community is automatically agent. An agent has the ability to delete their community as long as it is not too large or too active. An agent can appoint and remove both leaders and curators. Agent status can be transferred voluntarily to another leader, curator, or community member. If an agent is inactive, Team Amino may assist in transferring agent status. == Apps == === Amino Community Manager === Otherwise known as ACM, this application is what users use to create and manage their own community in Amino. This app allows moderators to customize a community's theme, icon, and categories. ACM also allows moderation to customize community descriptions, pick leaders, change language settings, create a tagline for the community, change the home page lay out, alter the side navigation menu, and more. Unlisted communities are able to change their community's title and Amino ID, but this is not an option once a community is listed. A leader can use ACM to submit a request for their community to be listed on the explore page, after which the community will be reviewed by Team Amino for approval. Communities can be deleted on ACM, but only by the agent of that community. == Guidelines == Amino has a set of guidelines that all communities must comply with. Amino does not allow harassment or hate, spam or self-promotion (including promotion of one's own Amino community), sexual/NSFW content, self harm, real graphic/gross content (fictional content is generally acceptable), unsafe/illegal content, or content that violates copyright. Communities are allowed to have additional rules so long as they do not violate Amino's rules. In addition to Amino's rules, users are required to be at least 13 years of age in the U.S. and 16 years of age in European Union countries. While sexual imagery is not allowed in any community and text based sexual content is not allowed in public areas, some private communities are allowed to discuss sexual themes. However, they are not exempt from Amino's rules on NSFW content. If guidelines are broken, a leader may disable content or impose a warning, strike, or ban, depending on the severity of the infringement. A warning is a message informing the user that they have violated a guideline and may face further punishment unless they change their behaviour. A strike will put the user in read-only mode for up to 24 hours; this mode prevents the user from posting, chatting, or interacting with posts in that community. A ban removes the user from the community. Team Amino can separately issue users with strikes or bans across the entire platform. == Controversies == In 2017, organizations in Argentina for the protection of minors reported inappropriate material on the app, ranging from pornography to material promoting suicide to underage users. In 2019, Abilene police in Texas released a statement that sexual predators were using Amino chat rooms to approach minors. In 2020, authorities from the Christian County in the state of Kentucky alerted parents about possible sexual predators on Amino. In 2025, the British Police identified Amino as one of several platforms used by a child exploitation network that had previously extorted minors in different countries in Europe and North America. Several families reported to the National Society for the Prevention of Cruelty to Children that pedophiles were using the app for the purpose of sexual role-playing with minors, c

  Read more →
• 

  Mixvoip

  Mixvoip S.A. is a Luxembourg-based telecommunications service provider founded in 2008. The company offers IP telephony, high-speed Internet connectivity, and IT solutions to businesses and individuals. == Company history == In November 2017, Mixvoip expanded its operations to Belgium and Germany. At the beginning of 2019, the company acquired the telecommunications provider Voipgate. In December 2019, Mixvoip was named Telecom Company of the Year at the Luxembourg ICT Awards 2019 organized by Farvest and IT One. A 2024 article in Duke described the company's transition during the 2010s from traditional telephony services to cloud-based communication platforms. In the end of 2024, the ILR published the statistics about electronic communications in Luxembourg, including Mixvoip in the fix telephony section. In July 2025, Mixvoip acquired Crossing Telecom. In 2026, Mixvoip acquired Nomado's portfolio.

  Read more →
• 

  Plotting algorithms for the Mandelbrot set

  There are many programs and algorithms used to plot the Mandelbrot set and other fractals, some of which are described in fractal-generating software. These programs use a variety of algorithms to determine the color of individual pixels efficiently. == Escape time algorithm == The simplest algorithm for generating a representation of the Mandelbrot set is known as the "escape time" algorithm. A repeating calculation is performed for each x, y point in the plot area and based on the behavior of that calculation, a color is chosen for that pixel. === Unoptimized naïve escape time algorithm === In both the unoptimized and optimized escape time algorithms, the x and y locations of each point are used as starting values in a repeating, or iterating calculation (described in detail below). The result of each iteration is used as the starting values for the next. The values are checked during each iteration to see whether they have reached a critical "escape" condition, or "bailout". If that condition is reached, the calculation is stopped, the pixel is drawn, and the next x, y point is examined. For some starting values, escape occurs quickly, after only a small number of iterations. For starting values very close to but not in the set, it may take hundreds or thousands of iterations to escape. For values within the Mandelbrot set, escape will never occur. The programmer or user must choose how many iterations–or how much "depth"–they wish to examine. The higher the maximal number of iterations, the more detail and subtlety emerge in the final image, but the longer time it will take to calculate the fractal image. Escape conditions can be simple or complex. Because no complex number with a real or imaginary part greater than 2 can be part of the set, a common bailout is to escape when either coefficient exceeds 2. A more computationally complex method that detects escapes sooner, is to compute distance from the origin using the Pythagorean theorem, i.e., to determine the absolute value, or modulus, of the complex number. If this value exceeds 2, or equivalently, when the sum of the squares of the real and imaginary parts exceed 4, the point has reached escape. More computationally intensive rendering variations include the Buddhabrot method, which finds escaping points and plots their iterated coordinates. The color of each point represents how quickly the values reached the escape point. Often black is used to show values that fail to escape before the iteration limit, and gradually brighter colors are used for points that escape. This gives a visual representation of how many cycles were required before reaching the escape condition. To render such an image, the region of the complex plane we are considering is subdivided into a certain number of pixels. To color any such pixel, let c {\displaystyle c} be the midpoint of that pixel. We now iterate the critical point 0 under P c {\displaystyle P_{c}} , checking at each step whether the orbit point has modulus larger than 2. When this is the case, we know that c {\displaystyle c} does not belong to the Mandelbrot set, and we color our pixel according to the number of iterations used to find out. Otherwise, we keep iterating up to a fixed number of steps, after which we decide that our parameter is "probably" in the Mandelbrot set, or at least very close to it, and color the pixel black. In pseudocode, this algorithm would look as follows. The algorithm does not use complex numbers and manually simulates complex-number operations using two real numbers, for those who do not have a complex data type. The program may be simplified if the programming language includes complex-data-type operations. for each pixel (Px, Py) on the screen do x0 := scaled x coordinate of pixel (scaled to lie in the Mandelbrot X scale (-2.00, 0.47)) y0 := scaled y coordinate of pixel (scaled to lie in the Mandelbrot Y scale (-1.12, 1.12)) x := 0.0 y := 0.0 iteration := 0 max_iteration := 1000 while (xx + yy ≤ 22 AND iteration < max_iteration) do xtemp := xx - yy + x0 y := 2xy + y0 x := xtemp iteration := iteration + 1 color := palette[iteration] plot(Px, Py, color) Here, relating the pseudocode to c {\displaystyle c} , z {\displaystyle z} and P c {\displaystyle P_{c}} : z = x + i y {\displaystyle z=x+iy\ } z 2 = x 2 + 2 i x y {\displaystyle z^{2}=x^{2}+2ixy} - y 2 {\displaystyle y^{2}\ } c = x 0 + i y 0 {\displaystyle c=x_{0}+iy_{0}\ } and so, as can be seen in the pseudocode in the computation of x and y: x = R e ⁡ ( z 2 + c ) = x 2 − y 2 + x 0 {\displaystyle x=\mathop {\mathrm {Re} } (z^{2}+c)=x^{2}-y^{2}+x_{0}} and y = I m ⁡ ( z 2 + c ) = 2 x y + y 0 . {\displaystyle y=\mathop {\mathrm {Im} } (z^{2}+c)=2xy+y_{0}.\ } To get colorful images of the set, the assignment of a color to each value of the number of executed iterations can be made using one of a variety of functions (linear, exponential, etc.). One practical way, without slowing down calculations, is to use the number of executed iterations as an entry to a palette initialized at startup. If the color table has, for instance, 500 entries, then the color selection is n mod 500, where n is the number of iterations. === Optimized escape time algorithms === The code in the previous section uses an unoptimized inner while loop for clarity. In the unoptimized version, one must perform five multiplications per iteration. To reduce the number of multiplications the following code for the inner while loop may be used instead: x2:= 0 y2:= 0 w:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x:= x2 - y2 + x0 y:= w - x2 - y2 + y0 x2:= x x y2:= y y w:= (x + y) (x + y) iteration:= iteration + 1 The above code works via some algebraic simplification of the complex multiplication: ( i y + x ) 2 = − y 2 + 2 i y x + x 2 = x 2 − y 2 + 2 i y x {\displaystyle {\begin{aligned}(iy+x)^{2}&=-y^{2}+2iyx+x^{2}\\&=x^{2}-y^{2}+2iyx\end{aligned}}} Using the above identity, the number of multiplications can be reduced to three instead of five. The above inner while loop can be further optimized by expanding w to w = x 2 + 2 x y + y 2 {\displaystyle w=x^{2}+2xy+y^{2}} Substituting w into y = w − x 2 − y 2 + y 0 {\displaystyle y=w-x^{2}-y^{2}+y_{0}} yields y = 2 x y + y 0 {\displaystyle y=2xy+y_{0}} and hence calculating w is no longer needed. The further optimized pseudocode for the above is: x:= 0 y:= 0 x2:= 0 y2:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x2:= x x y2:= y y y:= 2 x y + y0 x:= x2 - y2 + x0 iteration:= iteration + 1 Note that in the above pseudocode, 2 x y {\displaystyle 2xy} seems to increase the number of multiplications by 1, but since 2 is the multiplier the code can be optimized via ( x + x ) y {\displaystyle (x+x)y} . == Coloring algorithms == In addition to plotting the set, a variety of algorithms have been developed to efficiently color the set in an aesthetically pleasing way show structures of the data (scientific visualisation) === Histogram coloring === A more complex coloring method involves using a histogram which pairs each pixel with said pixel's maximum iteration count before escape/bailout. This method will equally distribute colors to the same overall area, and, importantly, is independent of the maximum number of iterations chosen. This algorithm has four passes. The first pass involves calculating the iteration counts associated with each pixel (but without any pixels being plotted). These are stored in an array IterationCounts[x][y], where x and y are the x and y coordinates of said pixel on the screen respectively. The first step of the second pass is to create an array NumIterationsPerPixel[n], where the array size n is the maximum iteration count. Next, one must iterate over the array of pixel-iteration count pairs IterationCounts[x][y], and retrieve each pixel's saved iteration count, i, via e.g. i = IterationCounts[x][y]. After each pixel's iteration count i is retrieved, it is necessary to index the NumIterationsPerPixel array at i and increment the indexed value (which is initially zero) -- e.g. NumIterationsPerPixel[i] = NumIterationsPerPixel[i] + 1. for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do i:= IterationCounts[x][y] NumIterationsPerPixel[i]++ The third pass iterates through the NumIterationsPerPixel array and adds up all the stored values, saving them in total. The array index represents the number of pixels that reached that iteration count before bailout. total: = 0 for (i = 0; i < max_iterations; i++) do total += NumIterationsPerPixel[i] After this, the fourth pass begins and all the values in the IterationCounts array are indexed, and, for each iteration count i, associated with each pixel, the count is added to a global sum of all the iteration counts from 1 to i in the NumIterationsPerPixel array . This value is then normalized by dividing the sum by the total value computed earlier. hue[][]:= 0.0 for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do iteration:= Iteration

  Read more →
• 

  Mini-STX

  Mini-STX (mSTX, Mini Socket Technology EXtended, originally "Intel 5x5") is a computer motherboard form factor that was released by Intel in 2015 (as "Intel 5x5"). These motherboards measure 147mm by 140mm (5.8" x 5.5"), making them larger than "4x4" NUC (102x102mm / 4.01" x 4.01" inches) and Nano-ITX (120x120mm / 4.7" x 4.7") boards, but notably smaller than the more common Mini-ITX (170x170mm / 6.7" x 6.7") boards. Unlike these standards, which use a square shape, the Mini-STX form factor is 7mm longer from front-to-rear, making it slightly rectangular. == Mini-STX design elements == The Mini-STX design suggests (but does not require) support for: Socketed processors (e.g. LGA or PGA CPUs) Onboard power regulation circuitry, enabling direct DC power input IO ports embedded on the front and rear of the motherboard (akin to NUC, but unlike typical motherboards which often use headers instead to connect built-in ports on enclosures) == Adoption by manufacturers == This motherboard form factor is still not in particularly common use with consumer-PC manufacturers, although there are a few offerings: ASRock offers both DeskMini kits (that use mini-STX boards) and standalone motherboards, Asus offer VivoMini kits (that use mini-STX boards) and standalone motherboards, Gigabyte offers a few motherboards, and industrial PC suppliers (e.g. Kontron, Iesy, ASRock Industrial) also provide some options for mini-STX equipment. == Derivatives == ASRock developed a derivative of mini-STX, dubbed micro-STX, for their 'DeskMini GTX/RX' small form-factor PCs and industrial motherboards. Micro-STX adds an MXM slot which allows the use of special PCI Express expansion cards, including graphics or machine learning accelerators, but increases the width of the board to be extended two inches, resulting in measurements of 147 x 188 mm (5.8" x 7.4")

  Read more →
• 

  Personal media

  Personal media are media of communication which are used by an individual rather than by a corporation or institution. They are generally contrasted with mass media which are produced by teams of people and broadcast to a general population. In other words, personal media allow individuals, as opposed to corporate entities, to contribute knowledge and opinion to the public. The term dates from the 1980s. New technologies such as social media and self-publishing are creating a variety of modes for modern media. Marika Lüders suggests a two-dimensional model for classifying such media with one dimension being the degree of interaction between the senders and receivers; and the other dimension being the level of institutionalisation and professionalism. Katherine Nashleanas links the concept of personal media to the notion of 'control' by an individual as opposed to a centralised authority. She argues that although personal media including the fax have been available to the general public since the 1960s, more recent technologies such as the smartphone confer greater control over content production and distribution to their users.

  Read more →
• 

  Digital media service

  A digital media service (DMS) is an online service provider that sells access to digital library of content such as films, software, games, images, literature, etc. While no transfer of property is made, a nearly perfect duplicate of the data (song movie, etc.) is made on a customer's computer. Content is either primarily hosted on a dedicated server, which is owned by the service provider, or it is hosted primarily on the hard drives of its customers using a P2P protocol with, perhaps, a dedicated server to supplement. == History == One example of the older business model is the iTunes Store, which still markets and prices data as individual retail products. There are no examples of the latter business model in operation yet, but one is currently in development by Global Gaming Factory X and expected to begin operation some time after they acquire The Pirate Bay domain on August 27, 2009. A key difference between the two models is that the model which relies on its customer base for offering their bandwidth for other customers to access customer hosted data can operate at significantly lower costs than a company that seeks to limit data access to a per-download fee in order to supplement the cost of using its own hosting and bandwidth. The P2P model holds the potential for companies to offer unlimited access to the largest data library in the history of the internet to its customers for a reasonably low membership rate that is relevant to the cost of operation. While the market is virtually untouched, the P2P supplemented model will need entrepreneurs who are able to overcome a series of challenges in order to compete with the older business model as well as that which is offered for free (and often against the wishes of copyright holders) by hundreds of P2P communities on the internet. These challenges include, but are not limited to: Offering better data quality, speed, convenience and ease of use, protocol, sense of security, indexing and search organization, site up time, data library size, customer support, advertising, artist/copyright holder incentives and compensation, incentives and compensation for customers hosting data and providing bandwidth, guaranteed seeding (available access to indexed data at all times), than competitors.

  Read more →
• 

  Abiquo Enterprise Edition

  Abiquo Hybrid Cloud Management Platform is a web-based cloud computing software platform developed by Abiquo. Written entirely in Java, it is used to build, integrate and manage public and private clouds in homogeneous environments. Users can deploy and manage servers, storage system and network and virtual devices. It also supports LDAP integration. == Hypervisors == Abiquo supports five hypervisor systems. VMware ESXi Microsoft Hyper-V Citrix XenServer Oracle VM Server for x86 KVM From version 3.1, it also supports multiple public cloud providers: Amazon AWS Rackspace Google Compute Engine HP Cloud ElasticHosts DigitalOcean Abiquo version 3.2 added: Microsoft Azure Abiquo version 3.4 added: Support for Docker hosts, adding multi-tenant networking, storage management and private registry management for Docker SoftLayer CloudSigma Later versions continued to add features including autoscaling on any cloud, integration to VMware NSX and OpenStack Neutron for software defined networking, guest config with cloud-init and integrated monitoring driving guest automation. == Storage services == Abiquo supports any vendor for hypervisor storage, and also supports tiered storage pools, enabling storage-as-a-service from specific vendors and technologies including: NFS Generic iSCSI NetApp Nexenta == SAAS version == In April 2014 Abiquo launched Abiquo anyCloud, a SAAS version of the Abiquo Hybrid Cloud Platform software. This version lets users manage public cloud resources from: Amazon AWS Microsoft Azure IBM SoftLayer DigitalOcean Rackspace Open Cloud (an OpenStack cloud) HP Public Cloud (an OpenStack cloud) Google Compute Engine ElasticHosts Additional security and process features include workflow, to have an enterprise administrator electronically sign off on changes, an audit trail of activity and the ability to share cloud accounts among and enterprise team in a secure way. == Reviews and awards == Finalist for the 2015 Cloud Awards Finalist for the 2015 UK Cloud Awards in the category Cloud Management Product of the Year EMA Radar for Private Cloud platforms 2013 Global Telecoms Business Innovation Summit and Awards 2013 (with Interoute) EuroCloud UK Awards

  Read more →
• 

  LTE Advanced

  LTE Advanced, also named or recognized as LTE+, LTE-A or 4G+, is a 4G mobile cellular communication standard developed by 3GPP as a major enhancement of the Long Term Evolution (LTE) standard. Three technologies from the LTE-Advanced tool-kit – carrier aggregation, 4x4 MIMO and 256QAM modulation in the downlink – if used together and with sufficient aggregated bandwidth, can deliver maximum peak downlink speeds approaching, or even exceeding, 1 Gbit/s. This is significantly more than the peak 300 Mbit/s rate offered by the preceding LTE standard. Later developments have resulted in LTE Advanced Pro (or 4.9G) which increases bandwidth even further. The first ever LTE Advanced network was deployed in 2013 by SK Telecom in South Korea. In August 2019, the Global mobile Suppliers Association (GSA) reported that there were 304 commercially launched LTE-Advanced networks in 134 countries. Overall, 335 operators are investing in LTE-Advanced (in the form of tests, trials, deployments or commercial service provision) in 141 countries. == Name == LTE Advanced is also named (indicated as) LTE+, LTE-A, or (on Samsung Galaxy and Xiaomi smartphones) as 4G+. Such networks have also often been described as ‘Gigabit LTE networks’ mirroring a term that is also used in the fixed broadband industry. == History == The mobile communication industry and standards organizations have therefore started work on 4G access technologies, such as LTE Advanced. At a workshop in April 2008 in China, 3GPP agreed the plans for work on Long Term Evolution (LTE). A first set of specifications were approved in June 2008. Besides the peak data rate 1 Gb/s as defined by the ITU-R, it also targets faster switching between power states and improved performance at the cell edge. Detailed proposals are being studied within the working groups. The LTE+ format was first proposed by NTT DoCoMo of Japan and has been adopted as the international standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10. The work by 3GPP to define a 4G candidate radio interface technology started in Release 9 with the study phase for LTE-Advanced. Being described as a 3.9G (beyond 3G but pre-4G), the first release of LTE did not meet the requirements for 4G (also called IMT Advanced as defined by the International Telecommunication Union) such as peak data rates up to 1 Gb/s. The ITU has invited the submission of candidate Radio Interface Technologies (RITs) following their requirements in a circular letter, 3GPP Technical Report (TR) 36.913, "Requirements for Further Advancements for E-UTRA (LTE-Advanced)." These are based on ITU's requirements for 4G and on operators’ own requirements for advanced LTE. Major technical considerations include the following: Continual improvement to the LTE radio technology and architecture Scenarios and performance requirements for working with legacy radio technologies Backward compatibility of LTE-Advanced with LTE. An LTE terminal should be able to work in an LTE-Advanced network and vice versa. Any exceptions will be considered by 3GPP. Consideration of recent World Radiocommunication Conference (WRC-07) decisions regarding frequency bands to ensure that LTE-Advanced accommodates the geographically available spectrum for channels above 20 MHz. Also, specifications must recognize those parts of the world in which wideband channels are not available. Likewise, 'WiMAX 2', 802.16m, has been approved by ITU as the IMT Advanced family. WiMAX 2 is designed to be backward compatible with WiMAX 1 devices. Most vendors now support conversion of 'pre-4G', pre-advanced versions and some support software upgrades of base station equipment from 3G. == Proposals == The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE. In the feasibility study for LTE Advanced, 3GPP determined that LTE Advanced would meet the ITU-R requirements for 4G. The results of the study are published in 3GPP Technical Report (TR) 36.912. One of the important LTE Advanced benefits is the ability to take advantage of advanced topology networks; optimized heterogeneous networks with a mix of macrocells with low power nodes such as picocells, femtocells and new relay nodes. The next significant performance leap in wireless networks will come from making the most of topology, and brings the network closer to the user by adding many of these low power nodes – LTE Advanced further improves the capacity and coverage, and ensures user fairness. LTE Advanced also introduces multicarrier to be able to use ultra wide bandwidth, up to 100 MHz of spectrum supporting very high data rates. In the research phase many proposals have been studied as candidates for LTE Advanced (LTE-A) technologies. The proposals could roughly be categorized into: Support for relay node base stations Coordinated multipoint (CoMP) transmission and reception UE Dual TX antenna solutions for SU-MIMO and diversity MIMO, commonly referred to as 2x2 MIMO Scalable system bandwidth exceeding 20 MHz, up to 100 MHz Carrier aggregation of contiguous and non-contiguous spectrum allocations Local area optimization of air interface Nomadic / Local Area network and mobility solutions Flexible spectrum usage Cognitive radio Automatic and autonomous network configuration and operation Support of autonomous network and device test, measurement tied to network management and optimization Enhanced precoding and forward error correction Interference management and suppression Asymmetric bandwidth assignment for FDD Hybrid OFDMA and SC-FDMA in uplink UL/DL inter eNB coordinated MIMO SONs, Self Organizing Networks methodologies Within the range of system development, LTE-Advanced and WiMAX 2 can use up to 8x8 MIMO and 128-QAM in downlink direction. Example performance: 100 MHz aggregated bandwidth, LTE-Advanced provides almost 3.3 Gbit peak download rates per sector of the base station under ideal conditions. Advanced network architectures combined with distributed and collaborative smart antenna technologies provide several years road map of commercial enhancements. The 3GPP standards Release 12 added support for 256-QAM. A summary of a study carried out in 3GPP can be found in TR36.912. == Timeframe and introduction of additional features == Original standardization work for LTE-Advanced was done as part of 3GPP Release 10, which was frozen in April 2011. Trials were based on pre-release equipment. Major vendors support software upgrades to later versions and ongoing improvements. In order to improve the quality of service for users in hotspots and on cell edges, heterogeneous networks (HetNets) are formed of a mixture of macro-, pico- and femto base stations serving corresponding-size areas. Frozen in December 2012, 3GPP Release 11 concentrates on better support of HetNet. Coordinated Multi-Point operation (CoMP) is a key feature of Release 11 in order to support such network structures. Whereas users located at a cell edge in homogenous networks suffer from decreasing signal strength compounded by neighbor cell interference, CoMP is designed to enable use of a neighboring cell to also transmit the same signal as the serving cell, enhancing quality of service on the perimeter of a serving cell. In-device Co-existence (IDC) is another topic addressed in Release 11. IDC features are designed to ameliorate disturbances within the user equipment caused between LTE/LTE-A and the various other radio subsystems such as WiFi, Bluetooth, and the GPS receiver. Further enhancements for MIMO such as 4x4 configuration for the uplink were standardized. The higher number of cells in HetNet results in user equipment changing the serving cell more frequently when in motion. The ongoing work on LTE-Advanced in Release 12, amongst other areas, concentrates on addressing issues that come about when users move through HetNet, such as frequent hand-overs between cells. It also included use of 256-QAM. == First technology demonstrations and field trials == This list covers technology demonstrations and field trials up to the year 2014, paving the way for a wider commercial deployment of the VoLTE technology worldwide. From 2014 onwards various further operators trialled and demonstrated the technology for future deployment on their respective networks. These are not covered here. Instead a coverage of commercial deployments can be found in the section below. == LTE Advanced Pro == LTE Advanced Pro (LTE-A Pro, also known as 4.5G, 4.5G Pro, 4.9G, Pre-5G, 5G Project) is a name for 3GPP release 13 and 14. It is an evolution of LTE Advanced (LTE-A) cellular standard supporting data rates in excess of 3 Gbit/s using 32-carrier aggregation. It also introduces th

  Read more →
• 

  Browser sniffing

  Browser sniffing (also known as User agent sniffing and browser detection) is a set of techniques used in websites and web applications in order to determine the web browser a visitor is using, and to serve browser-appropriate content to the visitor. It is also used to detect mobile browsers and send them mobile-optimized websites. This practice is sometimes used to circumvent incompatibilities between browsers due to misinterpretation of HTML, Cascading Style Sheets (CSS), or the Document Object Model (DOM). While the World Wide Web Consortium maintains up-to-date central versions of some of the most important Web standards in the form of recommendations, in practice no software developer has designed a browser which adheres exactly to these standards; implementation of other standards and protocols, such as SVG and XMLHttpRequest, varies as well. As a result, different browsers display the same page differently, and so browser sniffing was developed to detect the web browser in order to help ensure consistent display of content. == Sniffer methods == === Client-side sniffing === Web pages can use programming languages such as JavaScript which are interpreted by the user agent, with results sent to the web server. For example: This code is run by the client computer, and the results are used by other code to make necessary adjustments on client-side. In this example, the client computer is asked to determine whether the browser can use a feature called ActiveX. Since this feature was proprietary to Microsoft, a positive result will indicate that the client may be running Microsoft's Internet Explorer. This is no longer a reliable indicator since Microsoft's open-source release of the ActiveX code, however, meaning that it can be used by any browser. === Standard Browser detection method === The web server communicates with the client using a communication protocol known as HTTP, or Hypertext Transfer Protocol, which specifies that the client send the server information about the browser being used to view the website in a User-Agent header. === Server-side sniffing === Extensive browser techniques enable persistent user tracking even if users try to stay anonymous. See device fingerprint for more details on browser fingerprinting. == Issues and standards == Many websites use browser sniffing to determine whether a visitor's browser is unable to use certain features (such as JavaScript, DHTML, ActiveX, or cascading style sheets), and display an error page if a certain browser is not used. However, it is virtually impossible to account for the tremendous variety of browsers available to users. Generally, a web designer using browser sniffing to determine what kind of page to present will test for the three or four most popular browsers, and provide content tailored to each of these. If a user is employing a user agent not tested for, there is no guarantee that a usable page will be served; thus, the user may be forced either to change browsers or to avoid the page. The World Wide Web Consortium, which sets standards for the construction of web pages, recommends that web sites be designed in accordance with its standards, and be arranged to "fail gracefully" when presented to a browser which cannot deal with a particular standard. Browser sniffing increases maintenance needed. Websites treating some browsers differently should provide an alternative version for other browsers. Use of user agent strings are error-prone because the developer must check for the appropriate part, such as "Gecko" instead of "Firefox". They must also ensure that future versions are supported. Furthermore, some browsers allow changing the user agent string, making the technique useless.

  Read more →
• 

  Creative work

  A creative work is a manifestation of creative effort in the world through a creative process involving one or more individuals. The term includes fine artwork (sculpture, paintings, drawing, sketching, performance art), dance, writing (literature), filmmaking, and musical composition. The term is frequently used in the context of copyright. It is an important concept in both philosophy and law. Creative works require a creative mindset and are not typically rendered in an arbitrary fashion, although works may demonstrate (i.e., have in common) a degree of arbitrariness, such that it is improbable that two people would independently create the same work. At its base, creative work involves two main steps – having an idea, and then turning that idea into a substantive form or process. Typically, the creative process results in work that has some aesthetic value, identified as a creative expression. Naturally, this expression generally invokes external stimuli (e.g., influences and experiences) which a person draws on because they view the source as creative or inspirational; the degree to which this is reflected may be used in determinations of the derivativeness of the created work. Alternatively, the creator may draw on imagination, and their references may be clouded even to them, for the nature of imagination is as yet not fully understood philosophically, and the level of necessary self-examination of an artist's internal processing is a challenge for even those most self-aware of their minds and mental processes. == Legal definition == === United Kingdom === For the purpose of section 221(2)(c) of the Income Tax (Trading and Other Income) Act 2005, the expression "creative works" means: (a) literary, dramatic, musical or artistic works, or (b) designs,created by the taxpayer personally or, if the qualifying trade, profession or vocation is carried on in partnership, by one or more of the partners personally.

  Read more →
• 

  MyPertamina

  MyPertamina is a digital financial service platform from Pertamina that integrated with the apps LinkAja. This application is used for non-cash fuel oil payments at Pertamina's public fueling stations. == History == Originally, MyPertamina were merchandise outlets of Pertamina products. It was launched on December 21, 2016, with 3 outlets in Jakarta. MyPertamina sells clothes, hats, and other products with Pertamina products brands. One month later (January 2017), Pertamina and Bank Mandiri entered into a partnership to launch the Mandiri Credit Card Pertamina Mastercard product, so that consumers can make payments when users fill up fuel at Pertamina gas stations. In August 2017, MyPertamina app and electronic card were launched through MyPertamina Loyalty program at Gaikindo Indonesia International Auto Show 2017. The card can be used on EDC machines for non-cash payments. Initial balances are in its own app, that can be top up by ATMs and online banking.

  Read more →
• 

  Ambient awareness

  Ambient awareness (AmA) is a term used by social scientists to describe a form of peripheral social awareness through social media. This awareness is propagated from relatively constant contact with one's friends and colleagues via social networking platforms on the Internet. The term essentially defines the sort of omnipresent knowledge one experiences by being a regular user of these media outlets that allow a constant connection with one's social circle. According to Clive Thompson of The New York Times, ambient awareness is "very much like being physically near someone and picking up on mood through the little things; body language, sighs, stray comments". Academic Andreas Kaplan defines ambient awareness as "awareness created through regular and constant reception, and/or exchange of information fragments through social media". Two friends who regularly follow one another's digital information can already be aware of each other's lives without actually being physically present to have had a conversation. == Social == Socially speaking, ambient awareness and social media are products of the new generations who are being born or growing up in the digital age, starting circa 1998 and running to current times. Social media is personal media (what you're doing in the moment, how you feel, a picture of where you are) combined with social communication. Social media is the lattice work for ambient awareness. Without social media the state of ambient awareness cannot exist. Artificial Social Networking Intelligence (ASNI) refers to the application of artificial intelligence within social networking services and social media platforms. It encompasses various technologies and techniques used to automate, personalize, enhance, improve, and synchronize user's interactions and experiences within social networks. ASNI is expected to evolve rapidly, influencing how we interact online and shaping their digital experiences. Transparency, ethical considerations, media influence bias, and user control over data will be crucial to ensure responsible development and positive impact. A significant feature of social media is that it is created by those who also consume it. Mostly, those participating in this phenomenon are adolescents, college age, or young adult professionals. According to Dr. Mimi Ito, a cultural anthropologist and Professor in Residence at the University of California at Irvine, the mobile device is the greatest proxy device used to create and distribute Social Media. She reportedly states that "teenagers capture and produce their own media, and stay in constant ambient contact with each other..." using mobile devices. Usually while doing this they are consuming other forms of media such as music or video content via their smart phones, tablets, or other similar devices. Effectively this has led social scientists to believe that learning and multitasking will have a new face as the products of the digital generation enter the work force and begin to integrate their learning methods into the standard preexisting business models of today. Professors Kaplan and Haenlein see ambient awareness as one of the major reasons for the success of such microblogging sites as Twitter. == Origins == The earliest available technology that could be used for constant social contact is the cell phone. For the first time, people could be contacted readily and at will beyond the confines of their work or homes. Then later, with the additional service of texting, one can see the somewhat primitive form of the status update. Since the text message only allows for 160 characters to transmit pertinent information it paved the way for the status update as we know it today. The transition from only having a few points of regular long distance contact, to being constantly available via cell phone, is what primed society for social networking websites. Perhaps the first instance where these websites created the possibility of larger scale ambient awareness was when Facebook installed the news feed. The news feed automatically sends compiled information on all of a users contacts activities directly to them so that they can access all of the happenings in their world from one location. For the first time, becoming someone's Facebook friend was the equivalent of subscribing to a feed of their daily minutiae. Since this innovation, a new wave of micro-blogging services have emerged, such as Twitter or Tumblr. Although these services have often been criticized as containing seemingly meaningless snippets of information, when a follower gathers a certain amount of information, they begin to obtain an ambient understanding of who they are following. This has led to the mass usage of social media as not only a social tool but also as a marketing and business tool. == Uses in marketing == Websites such as Twitter, YouTube, Facebook, and Myspace, among many others, have been used by people in all forms of business to create a closer digital/ambient bond with their clientele base. This is most notably seen in the music industry where social media networking has become the mainstay of all advertising for independent and major artists. The effect of this type of ambient marketing is that the consumer begins to get a sense of the artist's life style and personality. In this way social media outlets and ambient awareness have managed to tighten the gap between consumers and producers in all areas of business. == Uses in business processes == As web-based collaboration tools and social project management suites proliferate, the addition of activity streams to those products help to create business context-specific ambient awareness, and produce a new class of products, such as social project management platforms.

  Read more →
• 

  Remote scripting

  Remote scripting is a technology which allows scripts and programs that are running inside a browser to exchange information with a server. The local scripts can invoke scripts on the remote side and process the returned information. The earliest form of asynchronous remote scripting was developed before XMLHttpRequest existed, and made use of very simple process: a static web page opens a dynamic web page (e.g. at other target frame) that is reloaded with new JavaScript content, generated remotely on the server side. The XMLHttpRequest and similar "client-side script remote procedure call" functions, open the possibility of use and triggering web services from the web page interface. The web development community subsequently developed a range of techniques for remote scripting in order to enable consistent results across different browsers. Early examples include JSRS library from 2000, the introduction of the Image/Cookie technique in 2000. == JavaScript Remote Scripting == JavaScript Remote Scripting (JSRS) is a web development technique for creating interactive web applications using a combination of: HTML (or XHTML) The Document Object Model manipulated through JavaScript to dynamically display and interact with the information presented A transport layer. Different technologies may be used, though using a script tag or an iframe is used the most because it has better browser support than XMLHttpRequest A data format. XML with WDDX can be used as well as JSON or any other text format. Schematic A similar approach is Ajax, though it depends on the XmlHttpRequest in newer web browsers. === Libraries === Brent Ashley's original JSRS library released in 2000 BlueShoes JSRS with added encoding and OO RPC abstractions Simple Tutorials: Javascript Remote Scripting with PHP at the Wayback Machine (archived 2006-04-14) MSDN article

  Read more →