AI Art Detection

AI Art Detection — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

BLOOM (language model)

The BigScience Large Open-science Open-access Multilingual Language Model (BLOOM) is an open-access large language model (LLM) released in 2022. It was created by a volunteer-driven research effort to provide a transparently-created alternative to proprietary AI models. With 176 billion parameters, BLOOM is a transformer-based autoregressive model designed to generate text in 46 natural languages and 13 programming languages. The model is distributed under the project's "Responsible AI License". == Development == BLOOM is the main outcome of the BigScience initiative, a one-year-long research workshop. The project was coordinated by Hugging Face using funding from the French government and involved several hundred volunteer researchers and engineers from academia and the private sector. The model was trained between March and July 2022 on the Jean Zay public supercomputer in France, managed by GENCI and IDRIS (CNRS). Unlike GPT-3, BLOOM was trained to be multilingual. The source code is released under the Apache 2.0 license. The model's parameters are released under BigScience's "Responsible AI License" (RAIL), which grants open access and reuse rights but with some usage restrictions. BLOOM was used in the chatbots BLOOMChat and HuggingChat due to its multilingual abilities. BLOOM's training corpus, named ROOTS, combines data extracted from the then-latest version of the web-based OSCAR corpus (38% of ROOTS) and newly collected data extracted from a manually selected and documented list of language data sources. In total, the model was trained on approximately 366 billion (1.6TB) tokens. It was developed using the open-source libraries DeepSpeed Megatron. BigScience then released xP3, a multilingual dataset for LLM supervised learning. It also released BLOOMZ, a variant of BLOOM fine-tuned on xP3 to follow instructions.
Read more →
Information flow

In discourse-based grammatical theory, information flow is any tracking of referential information by speakers. Information may be new, i.e., just introduced into the conversation; given, i.e., already active in the speakers' consciousness; or old, i.e., no longer active. The various types of activation, and how these are defined, are model-dependent. Information flow affects grammatical structures such as: Word order (topic, focus, and afterthought constructions). Active, passive, or middle voice. Choice of deixis, such as articles; "medial" deictics such as Spanish ese and Japanese sore are generally determined by the familiarity of a referent rather than by physical distance. Overtness of information, such as whether an argument of a verb is indicated by a lexical noun phrase, a pronoun, or not mentioned at all. Clefting: Splitting a single clause into two clauses, each with its own verb, e.g. ‘The chicken turtles tasted like chicken.’ becomes ‘It was the chicken turtle | that tasted like chicken.’ In this case, clefting is used to shift the focus of the sentence to the subject, the chicken turtle. Front focus: Placing at the start (front) of a sentence information that would normally occur later in the sentence, to give it extra prominence. For example, in pop culture, Yoda's speech often utilizes such syntactic construction, such as when he says 'much to learn you still have' to Luke Skywalker. End focus (or end weight): Given or familiar information followed by new information. This gives prominence to the final part of the sentences and can enable suspense to build, e.g. ‘Through the door came a gigantic wolf’.(Umer Prince)
Read more →
Enterprise architecture

Enterprise architecture (EA) is a business function concerned with the structures and behaviours of a business, especially business roles and processes that create and use business data. The international definition according to the Federation of Enterprise Architecture Professional Organizations is "a well-defined practice for conducting enterprise analysis, design, planning, and implementation, using a comprehensive approach at all times, for the successful development and execution of strategy. Enterprise architecture applies architecture principles and practices to guide organizations through the business, information, process, and technology changes necessary to execute their strategies. These practices utilize the various aspects of an enterprise to identify, motivate, and achieve these changes." The United States Federal Government is an example of an organization that practices EA, in this case with its Capital Planning and Investment Control processes. Companies such as Independence Blue Cross, Intel, Volkswagen AG, and InterContinental Hotels Group also use EA to improve their business architectures as well as to improve business performance and productivity. Additionally, the Federal Enterprise Architecture's reference guide aids federal agencies in the development of their architectures. == Introduction == As a discipline, EA "proactively and holistically lead[s] enterprise responses to disruptive forces by identifying and analyzing the execution of change" towards organizational goals. EA gives business and IT leaders recommendations for policy adjustments and provides best strategies to support and enable business development and change within the information systems the business depends on. EA provides a guide for decision making towards these objectives. The National Computing Centre's EA best practice guidance states that an EA typically "takes the form of a comprehensive set of cohesive models that describe the structure and functions of an enterprise. The individual models in an EA are arranged in a logical manner that provides an ever-increasing level of detail about the enterprise." Important players within EA include enterprise architects and solutions architects. Enterprise architects are at the top level of the architect hierarchy, meaning they have more responsibilities than solutions architects. While solutions architects focus on their own relevant solutions, enterprise architects focus on solutions for and the impact on the whole organization. Enterprise architects oversee many solution architects and business functions. As practitioners of EA, enterprise architects support an organization's strategic vision by acting to align people, process, and technology decisions with actionable goals and objectives that result in quantifiable improvements toward achieving that vision. The practice of EA "analyzes areas of common activity within or between organizations, where information and other resources are exchanged to guide future states from an integrated viewpoint of strategy, business, and technology." === Definitions === The term enterprise can be defined as an organizational unit, organization, or collection of organizations that share a set of common goals and collaborate to provide specific products or services to customers. In that sense, the term enterprise covers various types of organizations, regardless of their size, ownership model, operational model, or geographical distribution. It includes those organizations' complete sociotechnical system, including people, information, processes, and technologies. Enterprise as a sociotechnical system defines the scope of EA. The term architecture refers to fundamental concepts or properties of a system in its environment; and embodied in its elements, relationships, and in the principles of its design and evolution. A methodology for developing and using architecture to guide the transformation of a business from a baseline state to a target state, sometimes through several transition states, is usually known as an enterprise architecture framework. A framework provides a structured collection of processes, techniques, artifact descriptions, reference models, and guidance for the production and use of an enterprise-specific architecture description. Open-source tools supporting EA practice, such as the Essential Project, have also been evaluated for suitability in academic and commercial training contexts. Paramount to changing the EA is the identification of a sponsor. Their mission, vision, strategy, and the governance framework define all roles, responsibilities, and relationships involved in the anticipated transformation. Changes considered by enterprise architects typically include innovations in the structure or processes of an organization; innovations in the use of information systems or technologies; the integration and/or standardization of business processes; and improvement of the quality and timeliness of business information. According to the standard ISO/IEC/IEEE 42010, the product used to describe the architecture of a system is called an architectural description. In practice, an architectural description contains a variety of lists, tables, and diagrams. These are models known as views. In the case of EA, these models describe the logical business functions or capabilities, business processes, human roles and actors, the physical organization structure, data flows and data stores, business applications and platform applications, hardware, and communications infrastructure. The first use of the term "enterprise architecture" is often incorrectly attributed to John Zachman's 1987 A framework for information systems architecture. The first publication to use it was instead a National Institute of Standards (NIST) Special Publication on the challenges of information system integration. The NIST article describes EA as consisting of several levels. Business unit architecture is the top level and might be a total corporate entity or a sub-unit. It establishes for the whole organization necessary frameworks for "satisfying both internal information needs" as well as the needs of external entities, which include cooperating organizations, customers, and federal agencies. The lower levels of the EA that provide information to higher levels are more attentive to detail on behalf of their superiors. In addition to this structure, business unit architecture establishes standards, policies, and procedures that either enhance or stymie the organization's mission. The main difference between these two definitions is that Zachman's concept was the creation of individual information systems optimized for business, while NIST's described the management of all information systems within a business unit. The definitions in both publications, however, agreed that due to the "increasing size and complexity of the [i]mplementations of [i]nformation systems... logical construct[s] (or architecture) for defining and controlling the interfaces and... [i]ntegration of all the components of a system" is necessary. Zachman in particular urged for a "strategic planning methodology." == Overview == === Schools of thought === Within the field of enterprise architecture, there are three overarching schools: Enterprise IT Design, Enterprise Integrating, and Enterprise Ecosystem Adaption. Which school one subscribes to will impact how they see the EA's purpose and scope, as well as the means of achieving it, the skills needed to conduct it, and the locus of responsibility for conducting it. Under Enterprise IT Design, the main purpose of EA is to guide the process of planning and designing an enterprise's IT/IS capabilities to meet the desired organizational objectives, often by greater alignment between IT/IS and business concerns. Architecture proposals and decisions are limited to the IT/IS aspects of the enterprise and other aspects service only as inputs. The Enterprise Integrating school believes that the purpose of EA is to create a greater coherency between the various concerns of an enterprise (HR, IT, Operations, etc.), including the link between strategy formulation and execution. Architecture proposals and decisions here encompass all aspects of the enterprise. The Enterprise Ecosystem Adaption school states that the purpose of EA is to foster and maintain the learning capabilities of enterprises so they may be sustainable. Consequently, a great deal of emphasis is put on improving the capabilities of the enterprise to improve itself, to innovate, and to coevolve with its environment. Typically, proposals and decisions encompass both the enterprise and its environment. === Benefits, challenges, and criticisms === The benefits of EA are achieved through its direct and indirect contributions to organizational goals. Notable benefits include support in the areas related to design and re-design of the organizational structures during mergers, acquisitions, or
Read more →
Artificial intelligence in India

The artificial intelligence (AI) market in India is projected to reach $8 billion by 2025, growing at 40% CAGR from 2020 to 2025. This growth is part of the broader AI boom, a global period of rapid technological advancements with India being pioneer starting in the early 2010s with NLP based Chatbots from Haptik, Corover.ai, Niki.ai and then gaining prominence in the early 2020s based on reinforcement learning, marked by breakthroughs such as generative AI models from Krutrim, Sarvam, CoRover, OpenAI and Alphafold by Google DeepMind. In India, the development of AI has been similarly transformative, with applications in healthcare, finance, and education, bolstered by government initiatives like NITI Aayog's 2018 National Strategy for Artificial Intelligence. Institutions such as the Indian Statistical Institute and the Indian Institute of Science published breakthrough AI research papers and patents. India's transformation to AI is primarily being driven by startups and government initiatives & policies like Digital India. By fostering technological trust through digital public infrastructure, India is tackling socioeconomic issues by taking a bottom-up approach to AI. NASSCOM and Boston Consulting Group estimate that by 2027, India's AI services might be valued at $17 billion. According to 2025 Technology and Innovation Report, by UN Trade and Development, India ranks 10th globally for private sector investments in AI. According to Mary Meeker, India has emerged as a key market for AI platforms, accounting for the largest share of ChatGPT's mobile app users and having the third-largest user base for DeepSeek in 2025. While AI presents significant opportunities for economic growth and social development in India, challenges such as data privacy concerns, skill shortages, and ethical considerations need to be addressed for responsible AI deployment. The growth of AI in India has also led to an increase in the number of cyberattacks that use AI to target organizations. == History == === Early days (1960s-1980s) === The TIFRAC (Tata Institute of Fundamental Research Automatic Calculator) was designed and developed by a team led by Rangaswamy Narasimhan between 1954 and 1960. He worked on pattern recognition from 1961 to 1964 at the University of Illinois Urbana-Champaign's Digital Computer Laboratory. In order to conduct research on database technology, computer networking, computer graphics, and systems software, he and M. G. K. Menon founded the National Centre for Software Development and Computing Techniques. In 1965, he established the Computer Society of India and supervised the initial research work on AI at Tata Institute of Fundamental Research. Jagdish Lal launched the first computer science program in 1976 at Motilal Nehru Regional Engineering College. H. K. Kesavan from the University of Waterloo and Vaidyeswaran Rajaraman from the University of Wisconsin–Madison joined the IIT Kanpur Electrical Engineering Department in 1963–1964 as Assistant Professor and Head of Department, respectively. H.N. Mahabala, who was employed at Bendix Corporation's Computer Division, joined the department in 1965. He previously worked with Marvin Minsky. The IIT Kanpur Computer Center was led by H. K. Kesavan, with Vaidyeswaran Rajaraman serving as his deputy. Kesavan informally permitted Rajaraman and Mahabala to introduce artificial intelligence into computer science classes. The computer science program was approved by IIT Kanpur in 1971 and split out from the electrical engineering department. In 1973, an IBM System/370 Model 155 was installed at IIT Madras. John McCarthy, head of the Artificial Intelligence Laboratory at Stanford University visited IIT Kanpur in 1971. He donated PDP-1 with a time-sharing operating system. During the 1970s, the balance of payments deficit in India restricted import of computers. The Department of Computer Science and Automation at the Indian Institute of Science established in 1969, played an important role in nurturing the development of data science and artificial intelligence in India. First course on AI was introduced in the 1970s by G. Krishna. B. L. Deekshatulu introduced the first course on pattern recognition in the early 1970s. === Foundation phase === ==== 1980s ==== In the 1980s, the Indian Statistical Institute's Optical Character Recognition Project was one of the country's first attempts at studying artificial intelligence and machine learning. OCR technology has benefited greatly from the work of ISI's Computer Vision and Pattern Recognition Unit, which is headed by Bidyut Baran Chaudhuri. He also contributed in the development of computer vision and digital image processing. As part of the Indian Fifth Generation Computer Systems Research Programme, the Department of Electronics, with support from the United Nations Development Programme, initiated the Knowledge Based Computer Systems Project in 1986, marking the beginning of India's first major AI research program. Prime Minister Rajiv Gandhi requested that the Department of Electronics and IISc to initiate the Parallel Processing Project in 1986–1987. The Center for Development of Advanced Computing eventually joined those efforts. IIT Madras was selected to develop system diagnosis, ISI for image processing, National Centre for Software Technology for natural language processing and TIFR for speech processing. In 1987, the proposal of N. Seshagiri, Director General of the National Informatics Centre for the prototype development of supercomputer was cleared. Negotiations for a Cray supercomputer were underway between the Reagan administration and the Rajiv Gandhi government. US Defense Secretaries Frank Carlucci and Caspar Weinberger visited New Delhi after the US approved the transfer in 1988. The sale of a lower-end XMP-14 supercomputer was permitted in lieu of the Cray XMP-24 supercomputer due to security concerns. The Center for Development of Advanced Computing was formally established in March 1988 by the Ministry of Communications and Information Technology (previously the Ministry of IT) within the Department of Information Technology (formerly the Department of Electronics) in response to a recommendation made to the Prime Minister by the Scientific Advisory Council. The National Initiative in Supercomputing, which produced the PARAM series, was led by Vijay P. Bhatkar. For the first ten years, supercomputing and Indian language computing were the two main focus areas. C-DAC has expanded its operations in order to meet the needs in a number of domains, including network and internet software, real-time systems, artificial intelligence, and NLP. Under the direction of Professor KV Ramakrishnamacharyulu from National Sanskrit University and Professor Rajeev Sangal from the International Institute of Information Technology, Hyderabad, the Akshar Bharati Research Group was established in 1984 with support from IIT Kanpur and the University of Hyderabad for computational processing of Indian languages. They focused on computational linguistics, NLP with ontological database systems, and Indian language/translation theories with linguistic tradition. ==== 1990s ==== From IIT Kanpur, Mohan Tambe joined C-DAC in the 1990s to work on Graphics and Intelligence based Script Technology (GIST), which addressed the challenge of adapting personal computer software based on Latin script to Devanagiri and a number of other Indian language scripts. He was previously working on the Machine Translation for Indian languages Project. Within C-DAC, he established the GIST group. The technology was expanded to encompass NLP, artificial intelligence-based machine-aided language learning and translation, multimedia and multilingual computing solutions, and more. GIST resulted in the creation of G-CLASS (GIST cross language search plug-ins suite), a cross-language search engine. The Applied Artificial Intelligence Group at C-DAC has developed some basic and novel applications in the field of NLP, including machine translation, information extraction/retrieval, automatic summarization, speech recognition, text-to-speech synthesis, intelligent language teaching, and natural language-based document management with Decision Support Systems. These applications are the result of the foundation laid by previous language technology activities. Software firms in the Indian private sector began looking into AI applications, mostly in the area of business process automation. In order to allow machines to read, comprehend, and interpret human languages, the Language Technologies Research Center was founded in October 1999 at the International Institute of Information Technology, Hyderabad. It focused on the advancements in semantic parsing, information extraction, natural language generation, sentiment analysis, and dialogue systems. Some of the early AI research in India was driven by societal needs. For example; Eklavya, a knowledge-based program created by I
Read more →
DreamLab

DreamLab was a volunteer computing Android and iOS app launched in 2015 by Imperial College London and the Vodafone Foundation. It was discontinued on 2nd April 2025. == Description == The app helped to research cancer, COVID-19, new drugs and tropical cyclones. To do this, DreamLab accessed part of the device's processing power, with the user's consent, while the owner charged their smartphone, to speed up the calculations of the algorithms from Imperial College London. The aim of the tropical cyclone project was to prepare for climate change risks. Other projects aimed to find existing drugs and food molecules that could help people with COVID-19 and other diseases. The performance of 100,000 smartphones would reach the annual output of all research computers at Imperial College in just three months, with a nightly runtime of six hours. The app was developed in 2015 by the Garvan Institute of Medical Research in Sydney and the Vodafone Foundation. In May 2020, the project had over 490,000 registered users.
Read more →
Behavior selection algorithm

In artificial intelligence, a behavior selection algorithm, or action selection algorithm, is an algorithm that selects appropriate behaviors or actions for one or more intelligent agents. In game artificial intelligence, it selects behaviors or actions for one or more non-player characters. Common behavior selection algorithms include: Finite-state machines Hierarchical finite-state machines Decision trees Behavior trees Hierarchical task networks Hierarchical control systems Utility systems Dialogue tree (for selecting what to say) == Related concepts == In application programming, run-time selection of the behavior of a specific method is referred to as the strategy design pattern.
Read more →
External memory algorithm

In computing, external memory algorithms or out-of-core algorithms are algorithms that are designed to process data that are too large to fit into a computer's main memory at once. Such algorithms must be optimized to efficiently fetch and access data stored in slow bulk memory (auxiliary memory) such as hard drives or tape drives, or when memory is on a computer network. External memory algorithms are analyzed in the external memory model. == Model == External memory algorithms are analyzed in an idealized model of computation called the external memory model (or I/O model, or disk access model). The external memory model is an abstract machine similar to the RAM machine model, but with a cache in addition to main memory. The model captures the fact that read and write operations are much faster in a cache than in main memory, and that reading long contiguous blocks is faster than reading randomly using a disk read-and-write head. The running time of an algorithm in the external memory model is defined by the number of reads and writes to memory required. The model was introduced by Alok Aggarwal and Jeffrey Vitter in 1988. The external memory model is related to the cache-oblivious model, but algorithms in the external memory model may know both the block size and the cache size. For this reason, the model is sometimes referred to as the cache-aware model. The model consists of a processor with an internal memory or cache of size M, connected to an unbounded external memory. Both the internal and external memory are divided into blocks of size B. One input/output or memory transfer operation consists of moving a block of B contiguous elements from external to internal memory, and the running time of an algorithm is determined by the number of these input/output operations. == Algorithms == Algorithms in the external memory model take advantage of the fact that retrieving one object from external memory retrieves an entire block of size B. This property is sometimes referred to as locality. Searching for an element among N objects is possible in the external memory model using a B-tree with branching factor B. Using a B-tree, searching, insertion, and deletion can be achieved in O ( log B ⁡ N ) {\displaystyle O(\log _{B}N)} time (in Big O notation). Information theoretically, this is the minimum running time possible for these operations, so using a B-tree is asymptotically optimal. External sorting is sorting in an external memory setting. External sorting can be done via distribution sort, which is similar to quicksort, or via a M B {\displaystyle {\tfrac {M}{B}}} -way merge sort. Both variants achieve the asymptotically optimal runtime of O ( N B log M B ⁡ N B ) {\displaystyle O\left({\frac {N}{B}}\log _{\frac {M}{B}}{\frac {N}{B}}\right)} to sort N objects. This bound also applies to the fast Fourier transform in the external memory model. The permutation problem is to rearrange N elements into a specific permutation. This can either be done either by sorting, which requires the above sorting runtime, or inserting each element in order and ignoring the benefit of locality. Thus, permutation can be done in O ( min ( N , N B log M B ⁡ N B ) ) {\displaystyle O\left(\min \left(N,{\frac {N}{B}}\log _{\frac {M}{B}}{\frac {N}{B}}\right)\right)} time. == Applications == The external memory model captures the memory hierarchy, which is not modeled in other common models used in analyzing data structures, such as the random-access machine, and is useful for proving lower bounds for data structures. The model is also useful for analyzing algorithms that work on datasets too big to fit in internal memory. A typical example is geographic information systems, especially digital elevation models, where the full data set easily exceeds several gigabytes or even terabytes of data. This methodology extends beyond general purpose CPUs and also includes GPU computing as well as classical digital signal processing. In general-purpose computing on graphics processing units (GPGPU), powerful graphics cards (GPUs) with little memory (compared with the more familiar system memory, which is most often referred to simply as RAM) are utilized with relatively slow CPU-to-GPU memory transfer (when compared with computation bandwidth). == History == An early use of the term "out-of-core" as an adjective is in 1962 in reference to devices that are other than the core memory of an IBM 360. An early use of the term "out-of-core" with respect to algorithms appears in 1971.
Read more →
Mobile content management system

A mobile content management system (MCMs) is a type of content management system (CMS) capable of storing and delivering content and services to mobile devices, such as mobile phones, smart phones, and PDAs. Mobile content management systems may be discrete systems, or may exist as features, modules or add-ons of larger content management systems capable of multi-channel content delivery. Mobile content delivery has unique, specific constraints including widely variable device capacities, small screen size, limitations on wireless bandwidth, sometimes small storage capacity, and (for some devices) comparatively weak device processors. Demand for mobile content management increased as mobile devices became increasingly ubiquitous and sophisticated. MCMS technology initially focused on the business to consumer (B2C) mobile market place with ringtones, games, text-messaging, news, and other related content. Since, mobile content management systems have also taken root in business-to-business (B2B) and business-to-employee (B2E) situations, allowing companies to provide more timely information and functionality to business partners and mobile workforces in an increasingly efficient manner. A 2008 estimate put global revenue for mobile content management at US$8 billion. == Key features == === Multi-channel content delivery === Multi-channel content delivery capabilities allow users not to manage a central content repository while simultaneously delivering that content to mobile devices such as mobile phones, smartphones, tablets and other mobile devices. Content can be stored in a raw format (such as Microsoft Word, Excel, PowerPoint, PDF, Text, HTML etc.) to which device-specific presentation styles can be applied. === Content access control === Access control includes authorization, authentication, access approval to each content. In many cases the access control also includes download control, wipe-out for specific user, time specific access. For the authentication, MCM shall have basic authentication which has user ID and password. For higher security many MCM supports IP authentication and mobile device authentication. === Specialized templating system === While traditional web content management systems handle templates for only a handful of web browsers, mobile CMS templates must be adapted to the very wide range of target devices with different capacities and limitations. There are two approaches to adapting templates: multi-client and multi-site. The multi-client approach makes it possible to see all versions of a site at the same domain (e.g. sitename.com), and templates are presented based on the device client used for viewing. The multi-site approach displays the mobile site on a targeted sub-domain (e.g. mobile.sitename.com). === Location-based content delivery === Location-based content delivery provides targeted content, such as information, advertisements, maps, directions, and news, to mobile devices based on current physical location. Currently, GPS (global positioning system) navigation systems offer the most popular location-based services. Navigation systems are specialized systems, but incorporating mobile phone functionality makes greater exploitation of location-aware content delivery possible.
Read more →
Camera interface

The Camera Interface block or CAMIF is the hardware block that interfaces with different image sensor interfaces and provides a standard output that can be used for subsequent image processing. A typical Camera Interface would support at least a parallel interface although these days many camera interfaces are beginning to support the Mobile Industry Processor Interface (MIPI) Camera Serial Interface (CSI) interface. == Electrical connections == The camera interface's parallel interface consists of the following lines: 8 to 12 bits parallel data line These are parallel data lines that carry pixel data. The data transmitted on these lines change with every Pixel Clock (PCLK). Horizontal Sync (HSYNC) This is a special signal that goes from the camera sensor or ISP to the camera interface. An HSYNC indicates that one line of the frame is transmitted. Vertical Sync (VSYNC) This signal is transmitted after the entire frame is transferred. This signal is often a way to indicate that one entire frame is transmitted. Pixel Clock (PCLK) This is the pixel clock and it would change on every pixel. NOTE: The above lines are all treated as input lines to the Camera Interface hardware.
Read more →
Informetrics

Informetrics is the study of quantitative aspects of information, it is an extension and evolution of traditional bibliometrics and scientometrics. Informetrics uses bibliometrics and scientometrics methods to study mainly the problems of literature information management and evaluation of science and technology. Informetrics is an independent discipline that uses quantitative methods from mathematics and statistics to study the process, phenomena, and law of informetrics. Informetrics has gained more attention as it is a common scientific method for academic evaluation, research hotspots in discipline, and trend analysis. Informetrics includes the production, dissemination, and use of all forms of information, regardless of its form or origin. Informetrics encompasses the following fields: Scientometrics, which studies quantitative aspects of science Webometrics, which studies quantitative aspects of the World Wide Web Bibliometrics, which studies quantitative aspects of recorded information Cybermetrics, which is similar to webometrics, but broadens its definition to include electronic resources == Origin and Development == The term informetrics (French: informétrie) was coined by German scholar Otto Nacke in 1979, and came from the German word 'informetrie’. The corresponding English terminology soon appeared in the subsequent literature. In September 1980, Professor Otto Nacke introduced the term 'informetrics' at the first seminar on Informetrics in Frankfurt, Germany. Later, Committee on Informetrics has established through The International Federation for Information and Documentation (FID). In 1987, informetrics started to be officially recognized by the international information community and several foreign information scientists. In 1988, at First International Conference on Bibliometrics and Theoretical Aspects of Information Retrieval Archived 2022-05-23 at the Wayback Machine, Brooks suggested bibliometrics and scientometrics can be included in the field of informetrics. In 1990, Leo Egghe and Ronald Rousseau proposed the formation of the discipline of informetrics: statistical bibliography (1923) to bibliometrics and scientometrics (1969) and then to informetrics (1979). In 1993, the International Society for Scientometrics and Informetrics (ISSI) Archived 2023-11-05 at the Wayback Machine was founded at the International Conference on Bibliometrics, Informetrics and Scientometrics in Berlin, and the first one was held in Belgium and organized by Leo Egghe and Ronald Rousseau. The society was formally incorporated in 1994 in the Netherlands and plays a significant role in the development of informetrics. The ISSI aims to promote the "exchange and communication of professional information in the fields of scientometrics and informetrics, including improve standards, theory and practice, as well as promote research, education and training". In addition, to "engage in relevant public conversation and policy discussions". In the western world, 20th century's Informetrics is mostly based on Lotka's law, named after Alfred J. Lotka, Zipf's law, named after George Kingsley Zipf, Bradford's law named after Samuel C. Bradford and on the work of Derek J. de Solla Price, Gerard Salton, Leo Egghe, Ronald Rousseau, Tibor Braun, Olle Persson, Peter Ingwersen, Manfred Bonitz, and Eugene Garfield. == Difference Between Informetrics, Bibliometrics and Scientometrics == Since the 1960s, three similar terms have emerged in the fields of library science, philology and science of science, they are bibliometrics, scientometrics and informetrics, representing three very similar quantitative sub-disciplines. The three metrics terms can be confusing and often misused. Informetrics and bibliometrics interpenetrate each other but have different aspects in research object, research scope, and measuring unit. Informetrics and scientometrics are very different in their research purpose and research object, as well as the research scope and application. Bibliometrics is categorised under the field of library science, it uses mathematical and statistical methods to describe, evaluate, and predict the current status and trends of science and technology. Also to study the "distribution structure, quantitative relationship, change law and quantitative management of literature information, quantitative relationships, patterns and quantitative management of literature and information". The term was first used by Alan Pritchard in 1969 in his paper Statistical Bibliography or Bibliometrics?. Scientometrics is a branch of science that quantitatively evaluates and predicts the process and management of scientific activities in order to reveal their development patterns and trends. The definition of scientometrics was described by Derek De Solla Price in his book Science to Science as the “quantitative study of science, communication in science, and science policy”. === Links between the three metrics terms === The most prominent connection between the three metrics terms is in their research objects. Since all three disciplines use literature information as their research object, therefore, they have some similarities and overlaps in their research methods and fields. Moreover, they all use mathematical methods as the basic research methods and they all apply the three basic laws, Bradford's law, Lotka's law and Zipf's law. === Distinctions between the three metrics terms === The distinction between the three metrics terms can tell from their research object and research purpose. The research of bibliometrics focuses on the analysis of "scientific output in the form of articles, publications, citations, and others". Scientometrics is to measure the basic characteristics and laws of scientific activities. Where informetrics is to investigate information sources and information distribution process. == Concept and System Structure == === Purpose of Informetrics Research === The main purpose of informetrics is to use its theocratical research to solve the methodological issues in the research process, and to discover and reveal the basic laws of information distribution through the study of information process and phenomenon. In this way, makes information management more scientific and provides a quantitative basis for information services and information management decisions. For informetrics, it is necessary to bring quantitative analysis methods to further reveal the structure of information units and the "quantitative change law of literature information”. Further to this, to improve the scientific accuracy of information science from a theoretical point of view. At the same time, to better solve the basic contradictions in the information service, overcome the information crisis, and make the information management work more effective to serve science and technology, economic and social development. Quantitative analysis of bibliographic data was pioneered by Robert K. Merton in an article called Science, Technology, and Society in Seventeenth Century England and originally published by Merton in 1938. === The Significance of Informetrics Research === The significance of informetrics research is to summarize various empirical laws from the theoretical point of view, at the same time test and modify the various empirical laws in the new information unit conditions, and explore its new applicability, therefore, the scientific nature of information science can be improved, but also to provide theoretical guidance for practical work. === The Objects of Informetrics Research === The object of informetrics is broader than the field of bibliometrics and scientometrics, including "messages, data, events, objects, text, and documents”. Informetrics is often used to inform policies and decisions across a broad range of fields, such as economy, politics, technology and social spheres that "influence the flow and use patterns of information". Tague-Sutcliffe describes the following uses of informetrics: Citation analysis; Characteristics of authors; Use of recorded information; Obsolescence of the literature; Concomitant growth of new concepts; Characteristics of publication sources; Definition and measurement o information; Growth of subject literature, databases, libraries; Types and characteristics of retrieval performance measures; Statistical aspects of language, word, and phrase frequencies. == Basic Laws == In the field of informetrics research, there are many outstanding contributors in the discipline with a solid knowledge of quantitative research methods. In the early 20th century, several scientists contributed empirical applications that have become the three basic laws of informetrics, Bradford's law, Lotka's law, and Zipf's law, which promote the development of informetrics. === Bradford's Law === The British documentalist and librarian Samuel C. Bradford first discovered the law of concentration and scattering of literature, and in 1934, it has be
Read more →
Wiki survey

Wiki surveys or wikisurveys are a software-based survey method that crowdsource discussions and help participants to find areas of agreement. Other names include bridging systems and collective response systems. The approach, inspired by Wikipedia, is to open up surveys where participants can shape the questions, instead of traditional 'closed' surveys where participants can only respond to the questions asked. Wiki surveys have been used for purposes including facilitating deliberative democracy, crowdsourcing opinions from experts and figuring out common beliefs on a given topic. A notable usage of wiki surveys is in Taiwan's government system, where citizens can participate in crowdsourced lawmaking through Pol.is wiki surveys. == Implementations == === All Our Ideas === All Our Ideas founders coined the term "wiki survey," explaining how they took inspiration from the organic evolution of Wikipedia and hoped to create something similar for surveys. They hosted 5000 surveys between 2010 and 2014. A 2020 survey using the tool found 3 of its top 10 findings were user-generated. === Decidim === Decidim has been used by governments throughout Spain and Europe to help with participatory budgeting and other public policy decisions. === Polis === Polis (also known as Pol.is) was developed in 2012. The focus of Polis is to project participants into an 'opinion space' where they can see how their voting behavior compares to other participants. The opinion space clusters participants into groups of similar opinion and is designed in a way to avoid tyranny of the majority by being able to include groups that have small numbers of participants. The questions participants are presented with are agree/disagree/pass on a single 'comment' submitted by a participant. The code for Polis is free and open-source software under the GNU AGPL. === Remesh === Remesh was founded in 2013 and has partnered with the United Nations and Alliance for Middle East Peace efforts to bring peaceful resolutions to conflicts. Participants are anonymous and the algorithm can be fine-tuned to better understand local dialects in specific regions. == Examples == PlaNYC used All Our Ideas to gather ideas on how to establish New York City's sustainability plan vTaiwan, a citizen-lead government process in Taiwan, uses Polis for enabling large amounts of citizens to deliberate and consequently provide input on Taiwan's legislative decisions OECD used All Our Ideas to gather ideas from the public prior to meeting for a forum and meeting on which skills are most important to invest in for the 21st century March On, an offshoot of the Women's March Movement, used Polis to understand the opinions of people wanting to support the movement Residents of Harrogate use Polis to debate issues in their community, with the results being released publicly to everyone == Characteristics == Wiki surveys often have these three characteristics: === Collaborativeness === Wiki surveys allow participants to contribute questions, as well as answer questions created by its participants. === Adaptivity === Wiki surveys adapt to elicit the most useful information from its participants. One example involves changing the ordering of questions based on the voting behavior of previous participants so as to maximize consensus. The heuristic determining the ordering of questions highly values showing the comments that have been voted on the least. === 'Greediness' === In the context of wiki surveys, 'greediness' simply means making full use of information that participants are willing to provide. Wiki surveys do not require participants to answer a fixed amount of questions, so participants can answer as little or as much as they want. This is intended to be more efficient in capturing participants' preferences by allowing more organic sharing of their perspectives. == Traditional survey methods vs. wiki surveys == Questions in traditional survey methods fall into two categories: Open and closed questions. Open questions ask the person taking the survey to write an open response while closed questions give a fixed set of responses to select from. Wiki surveys are like a hybrid of the two, enabling insightful consensus in certain situations where traditional survey methods may lack. Closed questions are easy to analyze quantitively, but the limited options to select from for a given question may cause bias. Open questions are not as subject to bias, but are difficult to analyze quantitatively at scale. Wiki surveys allow for open responses by the users' contribution of survey questions (also called 'items'), and uses machine learning techniques to (at least partially) automate the quantitative analysis of the responses to those questions.
Read more →
Applied Information Science in Economics

The Applied Information Science in Economics (Russian: Прикладная информатика в Экономике) or Applied Computer Science in Economics is a professional qualification generally awarded in Russian Federation. The degree inherited from the U.S.S.R. education system also known as Specialist degree. The degree is awarded after five years of full-time study and includes several internships, course-works, thesis writing and defense. The degree has similarities with German Magister Artium or Diplom degree. However, due to the Bologna Process number of such degrees are declining. Degree focuses on applying mathematical methods in economics involving maximum information technology. It is very close to applied mathematics, but includes also major part of computer science. == List of specialty codes in the education system == 080801 - Applied computer science in economics 351400 - Applied computer science == Fields of activity == Organization and management; Project design; Experimental research; Marketing; Consulting; Operational and Maintenance. == Major == Information Science and Programming. High Level Methods of Information Science and Programming. Information Technologies in Economics. Computer Systems, Networks and Telecommunications Services. Operational Environments, Systems and Shells. Architecture and Design of Information Systems for Companies. Data Bases. Information security. Information Management. Imitative Simulation.
Read more →
Ayoba

Ayoba is an African communication platform developed in South Africa. It is owned by Progressive Tech Holdings in Mauritius and managed by SIMFY Africa. Launched on May 4, 2019, as of April 2024, it has over 35 million active users. == History == Ayoba was first published on Google Play in February 2019. Its first marketing campaign and brand launch took place in Cameroon on May 4, 2019. In June 2019, the platform introduced its first eight channels. In November 2019, the platform reached one million active users, which increased to two million by June 2020. Subsequently, ayoba expanded its services, including the launch of games for Android in February 2020, Momo (Mobile Money) in Cameroon in May 2020, and MicroApps in May 2020. It also launched music and voice and video calling features in 12 territories in August 2020. The first version of ayoba for iOS was released in September 2020. In December of the same year, games and Messaging 2.0 were launched on the platform. In November 2020, it won Best Mobile Application at the African Digital Awards. In 2021, it won OTT Brand of the Year at the Marketing World Awards in Ghana. In December 2022, it received Top Innovative Technology and Telecom Product of the Year at the National Communications Awards in December 2022. In June 2023 ayoba partnered with BoomPlay and as of April 2024, it had 35 million monthly active users. Ayoba has partnered with Jumia Ghana to offer exclusive deals to users. Ayoba users can get a 10% discount on selected Jumia purchases through the app, with no data charges for MTN users. This partnership aims to make online shopping more affordable and accessible by integrating Jumia's offers into the ayoba app. Ayoba supports over 35 million users across Africa and provides services in 22 languages. To access the deals, users can download the ayoba app from the Google Play Store, iOS Store, or the official website. == Platform features == Chat, Call and Share: ayoba enables instant messaging, voice notes, picture sharing, and file sharing with contacts, even if they do not have the app installed. The app supports voice and video calls on both Android and iOS, as well as group chats, help channel and SMS continuity (non ayoba users receive messages as SMS, their responses appear in the ayoba app). Music: ayoba offers a free music player with daily updates on international and African music. Users can find playlists for different genres. Games: ayoba provides a selection of interactive games, including action, adventure, and children's games available on both Android and iOS. Mobile Money Transfers: In certain territories, ayoba supports mobile money transfers using MTN Mobile Money (MoMo) for transactions within the app. MicroApps: ayoba features individual MicroApps within the platform that offer content and services, including streaming channels, podcasts, and specialized apps. The availability of these apps may vary by country. == Operations == ayoba primarily focuses on the following territories: Nigeria, Cameroon, South Africa, Ghana, Côte d'Ivoire, Uganda, Republic of Congo, Benin, Zambia, Tanzania, Kenya, Senegal, Togo, Guinea Bissau, Guinea Conakry, Sudan, South Sudan, and Liberia. The company operates from its offices in Cape Town and Johannesburg, South Africa. David Gillaranz served as the CEO from 2019 to 2021, and Burak Akinci has been the CEO since 2021.
Read more →
Operational database

Operational database management systems (also referred to as OLTP databases or online transaction processing databases), are used to update data in real-time. These types of databases allow users to do more than simply view archived data. Operational databases allow you to modify that data (add, change or delete data), doing it in real-time. OLTP databases provide transactions as main abstraction to guarantee data consistency that guarantee the so-called ACID properties. Basically, the consistency of the data is guaranteed in the case of failures and/or concurrent access to the data. == History == Since the early 1990s, the operational database software market has been largely taken over by SQL engines. In 2014, the operational DBMS market (formerly OLTP) was evolving dramatically, with new, innovative entrants and incumbents supporting the growing use of unstructured data and NoSQL DBMS engines, as well as XML databases and NewSQL databases. NoSQL databases typically have focused on scalability and have renounced to data consistency by not providing transactions as OLTP system do. Operational databases are increasingly supporting distributed database architecture that can leverage distribution to provide high availability and fault tolerance through replication and scale out ability. The growing role of operational databases in the IT industry is moving fast from legacy databases to real-time operational databases capable to handle distributed web and mobile demand and to address Big data challenges. Recognizing this, Gartner started to publish the Magic Quadrant for Operational Database Management Systems in October 2013. == List of operational databases == Notable operational databases include: == Use in business == Operational databases are used to store, manage and track real-time business information. For example, a company might have an operational database used to track warehouse/stock quantities. As customers order products from an online web store, an operational database can be used to keep track of how many items have been sold and when the company will need to reorder stock. An operational database stores information about the activities of an organization, for example customer relationship management transactions or financial operations, in a computer database. Operational databases allow a business to enter, gather, and retrieve large quantities of specific information, such as company legal data, financial data, call data records, personal employee information, sales data, customer data, data on assets and many other information. An important feature of storing information in an operational database is the ability to share information across the company and over the Internet. Operational databases can be used to manage mission-critical business data, to monitor activities, to audit suspicious transactions, or to review the history of dealings with a particular customer. They can also be part of the actual process of making and fulfilling a purchase, for example in e-commerce. == Data warehouse terminology == In data warehousing, the term is even more specific: the operational database is the one which is accessed by an operational system (for example a customer-facing website or the application used by the customer service department) to carry out regular operations of an organization. Operational databases usually use an online transaction processing database which is optimized for faster transaction processing (create, read, update and delete operations). An operational database is the source for a data warehouse. Data from an operational database can be loaded into an operational data store at a data warehouse before the data is processed into the data warehouse.
Read more →
Virtual directory

In computing, the term virtual directory has a couple of meanings. It may simply designate (for example in IIS) a folder which appears in a path but which is not actually a subfolder of the preceding folder in the path. However, this article will discuss the term in the context of directory services and identity management. A virtual directory or virtual directory server (VDS) in this context is a software layer that delivers a single access point for identity management applications and service platforms. A virtual directory operates as a high-performance, lightweight abstraction layer that resides between client applications and disparate types of identity-data repositories, such as proprietary and standard directories, databases, web services, and applications. A virtual directory receives queries and directs them to the appropriate data sources by abstracting and virtualizing data. The virtual directory integrates identity data from multiple heterogeneous data stores and presents it as though it were coming from one source. This ability to reach into disparate repositories makes virtual directory technology ideal for consolidating data stored in a distributed environment. As of 2011, virtual directory servers most commonly use the LDAP protocol, but more sophisticated virtual directories can also support SQL as well as DSML and SPML. Industry experts have heralded the importance of the virtual directory in modernizing the identity infrastructure. According to Dave Kearns of Network World, "Virtualization is hot and a virtual directory is the building block, or foundation, you should be looking at for your next identity management project." In addition, Gartner analyst, Bob Blakley said that virtual directories are playing an increasingly vital role. In his report, “The Emerging Architecture of Identity Management,” Blakley wrote: “In the first phase, production of identities will be separated from consumption of identities through the introduction of a virtual directory interface.” == Capabilities == Virtual directories can have some or all of the following capabilities: Aggregate identity data across sources to create a single point of access. Create high-availability for authoritative data stores. Act as identity firewall by preventing denial-of-service attacks on the primary data stores through an additional virtual layer. Support a common searchable namespace for centralized authentication. Present a unified virtual view of user information stored across multiple systems. Delegate authentication to backend sources through source-specific security means. Virtualize data sources to support migration from legacy data stores without modifying the applications that rely on them. Enrich identities with attributes pulled from multiple data stores, based on a link between user entries. Some advanced identity virtualization platforms can also: Enable application-specific, customized views of identity data without violating internal or external regulations governing identity data. Reveal contextual relationships between objects through hierarchical directory structures. Develop advanced correlation across diverse sources using correlation rules. Build a global user identity by correlating unique user accounts across various data stores, and enrich identities with attributes pulled from multiple data stores, based on a link between user entries. Enable constant data refresh for real-time updates through a persistent cache. == Advantages == Virtual directories: Enable faster deployment because users do not need to add and sync additional application-specific data sources Leverage existing identity infrastructure and security investments to deploy new services Deliver high availability of data sources Provide application-specific views of identity data which can help avoid the need to develop a master enterprise schema Allow a single view of identity data without violating internal or external regulations governing identity data Act as identity firewalls by preventing denial-of-service attacks on the primary data-stores and providing further security on access to sensitive data Can reflect changes made to authoritative sources in real-time Leverages existing update processes of authoritative sources, so no separate (sometimes manual) process to update a central directory is needed Present a unified virtual view of user information from multiple systems so that it appears to reside in a single system Can secure all backend storage locations with a single security policy == Disadvantages == An original disadvantage is public perception of "push & pull technologies" which is the general classification of "virtual directories" depending on the nature of their deployment. Virtual directories were initially designed and later deployed with "push technologies" in mind, which also contravened with privacy laws of the United States. This is no longer the case. There are, however, other disadvantages in the current technologies. The classical virtual directory based on proxy cannot modify underlying data structures or create new views based on the relationships of data from across multiple systems. So if an application requires a different structure, such as a flattened list of identities, or a deeper hierarchy for delegated administration, a virtual directory is limited. Many virtual directories cannot correlate same-users across multiple diverse sources in the case of duplicate users Virtual directories without advanced caching technologies cannot scale to heterogeneous, high-volume environments. == Sample terminology == Unify metadata: Extract schemas from the local data source, map them to a common format, and link the same identities from different data silos based on a unique identifier. Namespace joining: Create a single large directory by bringing multiple directories together at the namespace level. For instance, if one directory has the namespace "ou=internal,dc=domain,dc=com" and a second directory has the namespace "ou=external,dc=domain,dc=com," then creating a virtual directory with both namespaces is an example of namespace joining. Identity joining: Enrich identities with attributes pulled from multiple data stores, based on a link between user entries. For instance if the user joeuser exists in a directory as "cn=joeuser,ou=users" and in a database with a username of "joeuser" then the "joeuser" identity can be constructed from both the directory and the database. Data remapping: The translation of data inside of the virtual directory. For instance, mapping “uid” to “samaccountname,” so a client application that only supports a standard LDAP-compliant data source is able to search an Active Directory namespace, as well. Query routing: Route requests based on certain criteria, such as “write operations going to a master, while read operations are forwarded to replicas.” Identity routing: Virtual directories may support the routing of requests based on certain criteria (such as write operations going to a master while read operations being forwarded to replicas). Authoritative source: A "virtualized" data repository, such as a directory or database, that the virtual directory can trust for user data. Server groups: Group one or more servers containing the same data and functionality. A typical implementation is the multi-master, multi-replica environment in which replicas process "read" requests and are in one server group, while masters process "write" requests and are in another, so that servers are grouped by their response to external stimuli, even though all share the same data. == Use cases == The following are sample use cases of virtual directories: Integrating multiple directory namespaces to create a central enterprise directory. Supporting infrastructure integrations after mergers and acquisitions. Centralizing identity storage across the infrastructure, making identity information available to applications through various protocols (including LDAP, JDBC, and web services). Creating a single access point for web access management (WAM) tools. Enabling web single sign-on (SSO) across varied sources or domains. Supporting role-based, fine-grained authorization policies Enabling authentication across different security domains using each domain’s specific credential checking method. Improving secure access to information both inside and outside of the firewall.
Read more →