AI Art Backlash

AI Art Backlash — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  ByLock

  ByLock was a smartphone application that allowed users to communicate via a private, encrypted connection. It was launched in March 2014 on Google Play, Apple App Store The app was downloaded over 600,000 times from its launch in April 2014 until March 2016, when it was permanently shut down. The Turkish National Intelligence Organization (Turkish: Millî İstihbarat Teşkilatı, MİT) stated that the app was downloaded mainly in Turkey and the users were “Fetullahist Terror Organisation (FETÖ) which was formerly known as “Gülen movement” members. == Gülen Movement controversy == In Turkey, possession of the app is deemed evidence of membership in the Gülen Movement, which was allegedly connected to the failed Turkish coup d'état attempt in July 2016. Users of ByLock were deemed terrorists in Turkish courts. According to Deutsche Welle, of the 215,000 former ByLock users, an estimated 23,000 have been detained by Turkish authorities. Some believe that the MİT and other Turkish authorities manipulated the ByLock database in order to arrest suspected members of the Gülen Movement. Tuncay Beşikçi, a computer forensic expert in Turkey, emphasized that "the demands to investigate and analyze ByLock data from independent institutions are refused by the Turkish courts. But it is not normal". Tuncay Beşikçi believes that this application is precisely one of the channels for Gülen molecules to communicate and can also monitor the activities of other members of the organization. He also stated that the developers behind the Mor Beyin app, deliberately set a plan in motion that would put thousands of innocent people in prison as a cover for the Gülen movement. In December 2017, Turkish authorities revealed that almost half the people who had been prosecuted for having ByLock on their smartphones would have their legal cases reviewed, as they could have been redirected to the app without their knowledge. Following the failed coup attempt on 15 July 2016, the use of the ByLock messaging application by members of the Gülen Movement was the sole evidence in investigations and prosecutions to justify arrests and convictions for "membership in an armed terrorist organization." However, these decisions have been considered human rights violations by the European Court of Human Rights (ECHR), the United Nations Human Rights Committee, and the UN Working Group on Arbitrary Detention. Some of the relevant decisions include the following: === Decisions of the European Court of Human Rights === On 20 July 2021, in the case of Tekin Akgün v. Turkey, the European Court of Human Rights (ECHR) ruled that the use of the ByLock messaging application, unless supported by other evidence, does not create a reasonable suspicion of a crime. Based on this reasoning, the court found that the detention order violated Article 5 of the European Convention on Human Rights, which protects the right to liberty and security. In the Yüksel Yalçınkaya v. Turkey decision on 26 September 2023, the European Court of Human Rights (ECHR) examined an appeal against a conviction based on the use of ByLock. The Court ruled that the failure to provide an opportunity to challenge the authenticity of the ByLock data violated the right to a fair trial (Article 6 of the ECHR). The Court also stated that the mere use of ByLock could not be considered sufficient evidence for membership in an armed terrorist organization. It further noted that local courts had established an automatic presumption of guilt based solely on ByLock use, creating a broad and unpredictable interpretation of the law, making it nearly impossible for the accused to exonerate themselves. Therefore, the Court concluded that the conviction based on the use of ByLock violated the principle of no punishment without law (Article 7 of the ECHR). On 22 July 2025, in the Demirhan and 238 Others case, the European Court of Human Rights (ECHR) consolidated the applications of 239 individuals who had been convicted of "membership in an armed terrorist organization" based on their use of ByLock, as determined by 239 separate courts in Turkey. The Court ruled that the convictions violated the right to a fair trial under Article 6 and the principle of no punishment without law under Article 7 of the European Convention on Human Rights (ECHR). The ruling stated that the Turkish courts' "categorical approach" to the use of ByLock lacked legal foundation. In this context, it was emphasized that anyone who had used ByLock could not be convicted of membership in an armed terrorist organization based solely on this reasoning. The ruling also stated that, due to the large number of similar applications, the issue was "systemic in nature" and it called for a national solution to be developed by Turkey. While the Court did not order compensation for the 239 applicants, it emphasized that reopening the trial to ensure the enforcement of the violation ruling was the most appropriate remedy. This ruling, which confirms the violation finding in the Yüksel Yalçınkaya case of 26 September 2023, is considered a continuation of the ECHR's case law concerning trials based on ByLock evidence. === Decisions of the United Nations Human Rights Committee and Working Group === In the İsmet Özçelik and Turgay Karaman v. Turkey decision, dated 28 May 2019 (Application No. 2980/2017), the UN Human Rights Committee ruled that the use of ByLock and allegations of depositing money into Bank Asya could not justify the applicants' arrests. In the Mestan Yayman v. Turkey decision (Opinion No. 42/2018 – 21 August 2018) by the UN Human Rights Council Working Group on Arbitrary Detention, it was stated that using a public messaging application like ByLock cannot be considered criminal evidence, and that the use of such an application falls under the scope of freedom of thought and expression. The dozens of decisions later issued by the UN Human Rights Council Working Group are of the same nature.

  Read more →
• 

  Facial recognition system

  A facial recognition system is a technology potentially capable of matching a human face from a digital image or a video frame against a database of faces. Such a system is typically employed to authenticate users through ID verification services, and works by pinpointing and measuring facial features from a given image. Development on similar systems began in the 1960s as a form of computer application. Since their inception, facial recognition systems have seen wider uses in recent times on smartphones and in other forms of technology, such as robotics. Because computerized facial recognition involves the measurement of a human's physiological characteristics, facial recognition systems are categorized as biometrics. Although the accuracy of facial recognition systems as a biometric technology is lower than iris recognition, fingerprint image acquisition, palm recognition or voice recognition, it is widely adopted due to its contactless process. Facial recognition systems have been deployed in advanced human–computer interaction, video surveillance, law enforcement, passenger screening, decisions on employment and housing, and automatic indexing of images. Facial recognition systems are employed throughout the world today by governments and private companies. Their effectiveness varies, and some systems have previously been scrapped because of their ineffectiveness. The use of facial recognition systems has also raised controversy, with claims that the systems violate citizens' privacy, commonly make incorrect identifications, encourage gender norms and racial profiling, and do not protect important biometric data. The appearance of synthetic media such as deepfakes has also raised concerns about its security. These claims have led to the ban of facial recognition systems in several cities in the United States. Growing societal concerns led social networking company Meta Platforms to shut down its Facebook facial recognition system in 2021, deleting the face-scan data of more than one billion users. The change represented one of the largest shifts in facial recognition usage in the technology's history. IBM also stopped offering facial recognition technology due to similar concerns. == History of facial recognition technology == Automated facial recognition was pioneered in the 1960s by Woody Bledsoe, Helen Chan Wolf, and Charles Bisson, whose work focused on teaching computers to recognize human faces. Their early facial recognition project was dubbed "man-machine" because a human first needed to establish the coordinates of facial features in a photograph before they could be used by a computer for recognition. Using a graphics tablet, a human would pinpoint facial features coordinates, such as the pupil centers, the inside and outside corners of eyes, and the widows peak in the hairline. The coordinates were used to calculate 20 individual distances, including the width of the mouth and of the eyes. A human could process about 40 pictures an hour, building a database of these computed distances. A computer would then automatically compare the distances for each photograph, calculate the difference between the distances, and return the closed records as a possible match. In 1970, Takeo Kanade publicly demonstrated a face-matching system that located anatomical features such as the chin and calculated the distance ratio between facial features without human intervention. Later tests revealed that the system could not always reliably identify facial features. Nonetheless, interest in the subject grew and in 1977 Kanade published the first detailed book on facial recognition technology. In 1993, the Defense Advanced Research Project Agency (DARPA) and the Army Research Laboratory (ARL) established the face recognition technology program FERET to develop "automatic face recognition capabilities" that could be employed in a productive real life environment "to assist security, intelligence, and law enforcement personnel in the performance of their duties." Face recognition systems that had been trialled in research labs were evaluated. The FERET tests found that while the performance of existing automated facial recognition systems varied, a handful of existing methods could viably be used to recognize faces in still images taken in a controlled environment. The FERET tests spawned three US companies that sold automated facial recognition systems. Vision Corporation and Miros Inc were founded in 1994, by researchers who used the results of the FERET tests as a selling point. Viisage Technology was established by an identification card defense contractor in 1996 to commercially exploit the rights to the facial recognition algorithm developed by Alex Pentland at MIT. Following the 1993 FERET face-recognition vendor test, the Department of Motor Vehicles (DMV) offices in West Virginia and New Mexico became the first DMV offices to use automated facial recognition systems to prevent people from obtaining multiple driving licenses using different names. Driver's licenses in the United States were at that point a commonly accepted form of photo identification. DMV offices across the United States were undergoing a technological upgrade and were in the process of establishing databases of digital ID photographs. This enabled DMV offices to deploy the facial recognition systems on the market to search photographs for new driving licenses against the existing DMV database. DMV offices became one of the first major markets for automated facial recognition technology and introduced US citizens to facial recognition as a standard method of identification. The increase of the US prison population in the 1990s prompted U.S. states to established connected and automated identification systems that incorporated digital biometric databases, in some instances this included facial recognition. In 1999, Minnesota incorporated the facial recognition system FaceIT by Visionics into a mug shot booking system that allowed police, judges and court officers to track criminals across the state. Until the 1990s, facial recognition systems were developed primarily by using photographic portraits of human faces. Research on face recognition to reliably locate a face in an image that contains other objects gained traction in the early 1990s with the principal component analysis (PCA). The PCA method of face detection is also known as Eigenface and was developed by Matthew Turk and Alex Pentland. Turk and Pentland combined the conceptual approach of the Karhunen–Loève theorem and factor analysis, to develop a linear model. Eigenfaces are determined based on global and orthogonal features in human faces. A human face is calculated as a weighted combination of a number of Eigenfaces. Because few Eigenfaces were used to encode human faces of a given population, Turk and Pentland's PCA face detection method greatly reduced the amount of data that had to be processed to detect a face. Pentland in 1994 defined Eigenface features, including eigen eyes, eigen mouths and eigen noses, to advance the use of PCA in facial recognition. In 1997, the PCA Eigenface method of face recognition was improved upon using linear discriminant analysis (LDA) to produce Fisherfaces. LDA Fisherfaces became dominantly used in PCA feature based face recognition. While Eigenfaces were also used for face reconstruction. In these approaches no global structure of the face is calculated which links the facial features or parts. Purely feature based approaches to facial recognition were overtaken in the late 1990s by the Bochum system, which used Gabor filter to record the face features and computed a grid of the face structure to link the features. Christoph von der Malsburg and his research team at the University of Bochum developed Elastic Bunch Graph Matching in the mid-1990s to extract a face out of an image using skin segmentation. By 1997, the face detection method developed by Malsburg outperformed most other facial detection systems on the market. The so-called "Bochum system" of face detection was sold commercially on the market as ZN-Face to operators of airports and other busy locations. The software was "robust enough to make identifications from less-than-perfect face views. It can also often see through such impediments to identification as mustaches, beards, changed hairstyles and glasses—even sunglasses". Real-time face detection in video footage became possible in 2001 with the Viola–Jones object detection framework for faces. Paul Viola and Michael Jones combined their face detection method with the Haar-like feature approach to object recognition in digital images to launch AdaBoost, the first real-time frontal-view face detector. By 2015, the Viola–Jones algorithm had been implemented using small low power detectors on handheld devices and embedded systems. Therefore, the Viola–Jones algorithm has not only broadened the practical application of face recognition systems but

  Read more →
• 

  Weka (software)

  Waikato Environment for Knowledge Analysis (Weka) is a collection of machine learning and data analysis free software licensed under the GNU General Public License. It was developed at the University of Waikato, New Zealand, and is the companion software to the book "Data Mining: Practical Machine Learning Tools and Techniques". == Description == Weka contains a collection of visualization tools and algorithms for data analysis and predictive modeling, together with graphical user interfaces for easy access to these functions. The original non-Java version of Weka was a Tcl/Tk front-end to (mostly third-party) modeling algorithms implemented in other programming languages, plus data preprocessing utilities in C, and a makefile-based system for running machine learning experiments. This original version was primarily designed as a tool for analyzing data from agricultural domains, but the more recent fully Java-based version (Weka 3), for which development started in 1997, is now used in many different application areas, in particular for educational purposes and research. Advantages of Weka include: Free availability under the GNU General Public License. Portability, since it is fully implemented in the Java programming language and thus runs on almost any modern computing platform. A comprehensive collection of data preprocessing and modeling techniques. Ease of use due to its graphical user interfaces. Weka supports several standard data mining tasks, more specifically, data preprocessing, clustering, classification, regression, visualization, and feature selection. Input to Weka is expected to be formatted according the Attribute-Relational File Format and with the filename bearing the .arff extension. All of Weka's techniques are predicated on the assumption that the data is available as one flat file or relation, where each data point is described by a fixed number of attributes (normally, numeric or nominal attributes, but some other attribute types are also supported). Weka provides access to SQL databases using Java Database Connectivity and can process the result returned by a database query. Weka provides access to deep learning with Deeplearning4j. It is not capable of multi-relational data mining, but there is separate software for converting a collection of linked database tables into a single table that is suitable for processing using Weka. Another important area that is currently not covered by the algorithms included in the Weka distribution is sequence modeling. == Extension packages == In version 3.7.2, a package manager was added to allow the easier installation of extension packages. Some functionality that used to be included with Weka prior to this version has since been moved into such extension packages, but this change also makes it easier for others to contribute extensions to Weka and to maintain the software, as this modular architecture allows independent updates of the Weka core and individual extensions. == History == In 1993, the University of Waikato in New Zealand began development of the original version of Weka, which became a mix of Tcl/Tk, C, and makefiles. In 1997, the decision was made to redevelop Weka from scratch in Java, including implementations of modeling algorithms. In 2005, Weka received the SIGKDD Data Mining and Knowledge Discovery Service Award. In 2006, Pentaho Corporation acquired an exclusive licence to use Weka for business intelligence. It forms the data mining and predictive analytics component of the Pentaho business intelligence suite. Pentaho has since been acquired by Hitachi Vantara, and Weka now underpins the PMI (Plugin for Machine Intelligence) open source component. == Related tools == Auto-WEKA is an automated machine learning system for Weka. Environment for DeveLoping KDD-Applications Supported by Index-Structures (ELKI) is a similar project to Weka with a focus on cluster analysis, i.e., unsupervised methods. H2O.ai is an open-source data science and machine learning platform KNIME is a machine learning and data mining software implemented in Java. Massive Online Analysis (MOA) is an open-source project for large scale mining of data streams, also developed at the University of Waikato in New Zealand. Neural Designer is a data mining software based on deep learning techniques written in C++. Orange is a similar open-source project for data mining, machine learning and visualization based on scikit-learn. RapidMiner is a commercial machine learning framework implemented in Java which integrates Weka. scikit-learn is a popular machine learning library in Python.

  Read more →
• 

  Random projection

  In mathematics and statistics, random projection is a technique used to reduce the dimensionality of a set of points which lie in Euclidean space. According to theoretical results, random projection preserves distances well, but empirical results are sparse. They have been applied to many natural language tasks under the name random indexing. == Dimensionality reduction == Dimensionality reduction, as the name suggests, is reducing the number of random variables using various mathematical methods from statistics and machine learning. Dimensionality reduction is often used to reduce the problem of managing and manipulating large data sets. Dimensionality reduction techniques generally use linear transformations in determining the intrinsic dimensionality of the manifold as well as extracting its principal directions. For this purpose there are various related techniques, including: principal component analysis, linear discriminant analysis, canonical correlation analysis, discrete cosine transform, random projection, etc. Random projection is a simple and computationally efficient way to reduce the dimensionality of data by trading a controlled amount of error for faster processing times and smaller model sizes. The dimensions and distribution of random projection matrices are controlled so as to approximately preserve the pairwise distances between any two samples of the dataset. == Method == The core idea behind random projection is given in the Johnson-Lindenstrauss lemma, which states that if points in a vector space are of sufficiently high dimension, then they may be projected into a suitable lower-dimensional space in a way which approximately preserves pairwise distances between the points with high probability. In random projection, the original d {\displaystyle d} -dimensional data is projected to a k {\displaystyle k} -dimensional subspace, by multiplying on the left by a random matrix R ∈ R k × d {\displaystyle R\in \mathbb {R} ^{k\times d}} . Using matrix notation: If X d × N {\displaystyle X_{d\times N}} is the original set of N d-dimensional observations, then X k × N R P = R k × d X d × N {\displaystyle X_{k\times N}^{RP}=R_{k\times d}X_{d\times N}} is the projection of the data onto a lower k-dimensional subspace. Random projection is computationally simple: form the random matrix "R" and project the d × N {\displaystyle d\times N} data matrix X onto K dimensions of order O ( d k N ) {\displaystyle O(dkN)} . If the data matrix X is sparse with about c nonzero entries per column, then the complexity of this operation is of order O ( c k N ) {\displaystyle O(ckN)} . === Orthogonal random projection === A unit vector can be orthogonally projected to a random subspace. Let u {\displaystyle u} be the original unit vector, and let v {\displaystyle v} be its projection. The norm-squared ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as projecting a random point, uniformly sampled on the unit sphere, to its first k {\displaystyle k} coordinates. This is equivalent to sampling a random point in the multivariate gaussian distribution x ∼ N ( 0 , I d × d ) {\displaystyle x\sim {\mathcal {N}}(0,I_{d\times d})} , then normalizing it. Therefore, ‖ v ‖ 2 2 {\displaystyle \|v\|_{2}^{2}} has the same distribution as ∑ i = 1 k x i 2 ∑ i = 1 k x i 2 + ∑ i = k + 1 d x i 2 {\displaystyle {\frac {\sum _{i=1}^{k}x_{i}^{2}}{\sum _{i=1}^{k}x_{i}^{2}+\sum _{i=k+1}^{d}x_{i}^{2}}}} , which by the chi-squared construction of the Beta distribution, has distribution Beta ⁡ ( k / 2 , ( d − k ) / 2 ) {\displaystyle \operatorname {Beta} (k/2,(d-k)/2)} , with mean k / d {\displaystyle k/d} . We have a concentration inequality P r [ | ‖ v ‖ 2 − k d | ≥ ϵ k d ] ≤ 3 exp ⁡ ( − k ϵ 2 / 64 ) {\displaystyle Pr\left[\left|\|v\|_{2}-{\frac {k}{d}}\right|\geq \epsilon {\sqrt {\frac {k}{d}}}\right]\leq 3\exp \left(-k\epsilon ^{2}/64\right)} for any ϵ ∈ ( 0 , 1 ) {\displaystyle \epsilon \in (0,1)} . === Gaussian random projection === The random matrix R can be generated using a Gaussian distribution. The first row is a random unit vector uniformly chosen from S d − 1 {\displaystyle S^{d-1}} . The second row is a random unit vector from the space orthogonal to the first row, the third row is a random unit vector from the space orthogonal to the first two rows, and so on. In this way of choosing R, and the following properties are satisfied: Spherical symmetry: For any orthogonal matrix A ∈ O ( d ) {\displaystyle A\in O(d)} , RA and R have the same distribution. Orthogonality: The rows of R are orthogonal to each other. Normality: The rows of R are unit-length vectors. === More computationally efficient random projections === Achlioptas has shown that the random matrix can be sampled more efficiently. Either the full matrix can be sampled IID according to R i , j = 3 / k × { + 1 with probability 1 6 0 with probability 2 3 − 1 with probability 1 6 {\displaystyle R_{i,j}={\sqrt {3/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{6}}\\0&{\text{with probability }}{\frac {2}{3}}\\-1&{\text{with probability }}{\frac {1}{6}}\end{cases}}} or the full matrix can be sampled IID according to R i , j = 1 / k × { + 1 with probability 1 2 − 1 with probability 1 2 {\displaystyle R_{i,j}={\sqrt {1/k}}\times {\begin{cases}+1&{\text{with probability }}{\frac {1}{2}}\\-1&{\text{with probability }}{\frac {1}{2}}\end{cases}}} Both are efficient for database applications because the computations can be performed using integer arithmetic. More related study is conducted in. It was later shown how to use integer arithmetic while making the distribution even sparser, having very few nonzeroes per column, in work on the Sparse JL Transform. This is advantageous since a sparse embedding matrix means being able to project the data to lower dimension even faster. === Random Projection with Quantization === Random projection can be further condensed by quantization (discretization), with 1-bit (sign random projection) or multi-bits. It is the building block of SimHash, RP tree, and other memory efficient estimation and learning methods. == Large quasiorthogonal bases == The Johnson-Lindenstrauss lemma states that large sets of vectors in a high-dimensional space can be linearly mapped in a space of much lower (but still high) dimension n with approximate preservation of distances. One of the explanations of this effect is the exponentially high quasiorthogonal dimension of n-dimensional Euclidean space. There are exponentially large (in dimension n) sets of almost orthogonal vectors (with small value of inner products) in n–dimensional Euclidean space. This observation is useful in indexing of high-dimensional data. Quasiorthogonality of large random sets is important for methods of random approximation in machine learning. In high dimensions, exponentially large numbers of randomly and independently chosen vectors from equidistribution on a sphere (and from many other distributions) are almost orthogonal with probability close to one. This implies that in order to represent an element of such a high-dimensional space by linear combinations of randomly and independently chosen vectors, it may often be necessary to generate samples of exponentially large length if we use bounded coefficients in linear combinations. On the other hand, if coefficients with arbitrarily large values are allowed, the number of randomly generated elements that are sufficient for approximation is even less than dimension of the data space. == Implementations == RandPro - An R package for random projection sklearn.random_projection - A module for random projection from the scikit-learn Python library Weka implementation [1]

  Read more →
• 

  Pocketbook (application)

  Pocketbook was a Sydney-based free budget planner and personal finance app launched in 2012. The app helped users setup and manage budgets, track spending and manage bills. As of 2016 Pocketbook claimed to support over 250,000 Australians, in January 2018 that number was 435,000. After being acquired by Zip Co Ltd in 2016, it was announced in 2022 that the app was to be shut down and all user accounts deleted. == History == Pocketbook was founded by Alvin Singh and Bosco Tan in 2012. It was conceived in 2011 in a Wolli Creek apartment as a tool for Alvin and Bosco to take control of their money. In 2013, Pocketbook raised $500,000 from technology fund Tank Stream Ventures, and a group of investors including TV personality David Koch, Geoff Levy, David Shein and Peter Cooper. In September 2016 Digital retail finance and payment industry player zipMoney (now trading as Zip Co Limited) acquired Pocketbook in a $7.5m deal == Features == The app synced with the bank account of users and would organize spending into different categories. Users could also be reminded of bill payments, analyse spending and set spending limits. They can also be alerted of fraudulent transactions and deductions. The app employs security measures like end to end encryption, CloudFlare protection, fraud detection, identity protection etc. Pocketbook was available via web and mobile version. == Awards == Personal Finance Innovator of the Year by Fintech Business Awards 2017 Innovator of the Year by OPTUS MyBusiness Awards 2017 Best Finance App of 2016 by Australian Fintech Best Personal Finance App: Pocketbook won the 2016 Finder Innovation Awards, presented at a gala dinner hosted by media personality and The New Inventors presenter James O'Loghlin. Best Mobile App of the Year Winner: StartCon hosted the first annual Australasian Startup Awards. Over 200 nominations in 14 categories and an overall winner were reviewed, and winners were determined by public voting, with over 63,000 votes in total. Best New Startup 2014 by StartupSmart. Finalist in the SWIFT Innotribe startup competition in Dubai in 2013.

  Read more →
• 

  VIGRA

  VIGRA is the abbreviation for "Vision with Generic Algorithms". It is a free open-source computer vision library which focuses on customizable algorithms and data structures. VIGRA component can be easily adapted to specific needs of target application without compromising execution speed, by using template techniques similar to those in the C++ Standard Template Library. == Features == VIGRA is cross-platform, with working builds on Microsoft Windows, Mac OS X, Linux, and OpenBSD. Since version 1.7.1, VIGRA provides Python bindings based on numpy framework. == History == VIGRA was originally designed and implemented by scientists at University of Hamburg faculty of computer science; its core maintainers are now working at Heidelberg Collaboratory for Image Processing (HCI) University of Heidelberg. In the meantime, many developers have contributed to the project. == Application == CellCognition and ilastik uses VIGRA computer vision library. OpenOffice.org uses VIGRA as part of its headless software rendering backend; LibreOffice does so until version 5.2.

  Read more →
• 

  IDistance

  In pattern recognition, iDistance is an indexing and query processing technique for k-nearest neighbor queries on point data in multi-dimensional metric spaces. The kNN query is one of the hardest problems on multi-dimensional data, especially when the dimensionality of the data is high. iDistance is designed to process kNN queries in high-dimensional spaces efficiently and performs extremely well for skewed data distributions, which usually occur in real-life data sets. iDistance employs a two-phase search strategy involving an initial filtering of candidate regions and a subsequent refinement of results, an approach aligned with the Filter and Refine Principle (FRP). This means that the index first prunes the search space to eliminate unlikely candidates, then verifies the true nearest neighbors in a refinement step, following the general FRP paradigm used in database search algorithms. The iDistance index can also be augmented with machine learning models to learn data distributions for improved searching and storage of multi-dimensional data. == Indexing == Building the iDistance index has two steps: A number of reference points in the data space are chosen. There are various ways of choosing reference points. Using cluster centers as reference points is the most efficient way. The data points are partitioned into Voronoi cells based on well-chosen reference points. The distance between a data point and its closest reference point is calculated. This distance plus a scaling value is called the point's iDistance. By this means, points in a multi-dimensional space are mapped to one-dimensional values, and then a B+-tree can be adopted to index the points using the iDistance as the key. The figure on the right shows an example where three reference points (O1, O2, O3) are chosen. The data points are then mapped to a one-dimensional space and indexed in a B+-tree. Various extensions have been proposed to make the selection of reference points for effective query performance, including employing machine learning to learn the identification of reference points. == Query processing == To process a kNN query, the query is mapped to a number of one-dimensional range queries, which can be processed efficiently on a B+-tree. In the above figure, the query Q is mapped to a value in the B+-tree while the kNN search ``sphere" is mapped to a range in the B+-tree. The search sphere expands gradually until the k NNs are found. This corresponds to gradually expanding range searches in the B+-tree. The iDistance technique can be viewed as a way of accelerating the sequential scan. Instead of scanning records from the beginning to the end of the data file, the iDistance starts the scan from spots where the nearest neighbors can be obtained early with a very high probability. == Applications == The iDistance has been used in many applications including Image retrieval Video indexing Similarity search in P2P systems Mobile computing Recommender system == Historical background == The iDistance was first proposed by Cui Yu, Beng Chin Ooi, Kian-Lee Tan and H. V. Jagadish in 2001. Later, together with Rui Zhang, they improved the technique and performed a more comprehensive study on it in 2005.

  Read more →
• 

  Population model (evolutionary algorithm)

  The population model of an evolutionary algorithm (EA) describes the structural properties of its population to which its members are subject. A population is the set of all proposed solutions of an EA considered in one iteration, which are also called individuals according to the biological role model. The individuals of a population can generate further individuals as offspring with the help of the genetic operators of the procedure. The simplest and widely used population model in EAs is the global or panmictic model, which corresponds to an unstructured population. It allows each individual to choose any other individual of the population as a partner for the production of offspring by crossover, whereby the details of the selection are irrelevant as long as the fitness of the individuals plays a significant role. Due to global mate selection, the genetic information of even slightly better individuals can prevail in a population after a few generations (iteration of an EA), provided that no better other offspring have emerged in this phase. If the solution found in this way is not the optimum sought, that is called premature convergence. This effect can be observed more often in panmictic populations. In nature global mating pools are rarely found. What prevails is a certain and limited isolation due to spatial distance. The resulting local neighbourhoods initially evolve independently and mutants have a higher chance of persisting over several generations. As a result, genotypic diversity in the gene pool is preserved longer than in a panmictic population. It is therefore obvious to divide the previously global population by substructures. Two basic models were introduced for this purpose, the island models, which are based on a division of the population into fixed subpopulations that exchange individuals from time to time, and the neighbourhood models, which assign individuals to overlapping neighbourhoods, also known as cellular genetic or evolutionary algorithms (cGA or cEA). The associated division of the population also suggests a corresponding parallelization of the procedure. For this reason, the topic of population models is also frequently discussed in the literature in connection with the parallelization of EAs. == Island models == In the island model, also called the migration model or coarse grained model, evolution takes place in strictly divided subpopulations. These can be organised panmictically, but do not have to be. From time to time an exchange of individuals takes place, which is called migration. The time between an exchange is called an epoch and its end can be triggered by various criteria: E.g. after a given time or given number of completed generations, or after the occurrence of stagnation. Stagnation can be detected, for example, by the fact that no fitness improvement has occurred in the island for a given number of generations. Island models introduce a variety of new strategy parameters: Number of subpopulations Size of the subpopulations Neighbourhood relations between islands: they determine which islands are considered neighbouring and can thus exchange individuals, see picture of a simple unidirectional ring (black arrows) and its extension by additional bidirectional neighbourhood relations (additional green arrows) Criteria for the termination of an epoch, synchronous or asynchronous migration Migration rate: number or proportion of individuals involved in migration. Migrant selection: There are many alternatives for this. E.g. the best individuals can replace the worst or randomly selected ones. Depending on the migration rate, this can affect one or more individuals at a time. With these parameters, the selection pressure can be influenced to a considerable extent. For example, it increases with the interconnectedness of the islands and decreases with the number of subpopulations or the epoch length. == Neighbourhood models or cellular evolutionary algorithms == The neighbourhood model, also called diffusion model or fine grained model, defines a topological neighbouhood relation between the individuals of a population that is independent of their phenotypic properties. The fundamental idea of this model is to provide the EA population with a special structure defined as a connected graph, in which each vertex is an individual that communicates with its nearest neighbours. Particularly, individuals are conceptually set in a toroidal mesh, and are only allowed to recombine with close individuals. This leads to a kind of locality known as isolation by distance. The set of potential mates of an individual is called its neighbourhood or deme. The adjacent figure illustrates that by showing two slightly overlapping neighbourhoods of two individuals marked yellow, through which genetic information can spread between the two demes. It is known that in this kind of algorithm, similar individuals tend to cluster and create niches that are independent of the deme boundaries and, in particular, can be larger than a deme. There is no clear borderline between adjacent groups, and close niches could be easily colonized by competitive ones and maybe merge solution contents during this process. Simultaneously, farther niches can be affected more slowly. EAs with this type of population are also well known as cellular EAs (cEA) or cellular genetic algorithms (cGA). A commonly used structure for arranging the individuals of a population is a 2D toroidal grid, although the number of dimensions can be easily extended (to 3D) or reduced (to 1D, e.g. a ring, see the figure on the right). The neighbourhood of a particular individual in the grid is defined in terms of the Manhattan distance from it to others in the population. In the basic algorithm, all the neighbourhoods have the same size and identical shapes. The two most commonly used neighbourhoods for two-dimensional cEAs are L5 and C9, see the figure on the left. Here, L stands for Linear while C stands for Compact. Each deme represents a panmictic subpopulation within which mate selection and the acceptance of offspring takes place by replacing the parent. The rules for the acceptance of offspring are local in nature and based on the neighbourhood: for example, it can be specified that the best offspring must be better than the parent being replaced or, less strictly, only better than the worst individual in the deme. The first rule is elitist and creates a higher selective pressure than the second non-elitist rule. In elitist EAs, the best individual of a population always survives. In this respect, they deviate from the biological model. The overlap of the neighbourhoods causes a mostly slow spread of genetic information across the neighbourhood boundaries, hence the name diffusion model. A better offspring now needs more generations than in panmixy to spread in the population. This promotes the emergence of local niches and their local evolution, thus preserving genotypic diversity over a longer period of time. The result is a better and dynamic balance between breadth and depth search adapted to the search space during a run. Depth search takes place in the niches and breadth search in the niche boundaries and through the evolution of the different niches of the whole population. For the same neighbourhood size, the spread of genetic information is larger for elongated figures like L9 than for a block like C9, and again significantly larger than for a ring. This means that ring neighbourhoods are well suited for achieving high quality results, even if this requires comparatively long run times. On the other hand, if one is primarily interested in fast and good, but possibly suboptimal results, 2D topologies are more suitable. == Comparison == When applying both population models to genetic algorithms, evolutionary strategy and other EAs, the splitting of a total population into subpopulations usually reduces the risk of premature convergence and leads to better results overall more reliably and faster than would be expected with panmictic EAs. Island models have the disadvantage compared to neighbourhood models that they introduce a large number of new strategy parameters. Despite the existing studies on this topic in the literature, a certain risk of unfavourable settings remains for the user. With neighbourhood models, on the other hand, only the size of the neighbourhood has to be specified and, in the case of the two-dimensional model, the choice of the neighbourhood figure is added. == Parallelism == Since both population models imply population partitioning, they are well suited as a basis for parallelizing an EA. This applies even more to cellular EAs, since they rely only on locally available information about the members of their respective demes. Thus, in the extreme case, an independent execution thread can be assigned to each individual, so that the entire cEA can run on a parallel hardware platform. The island model also supports p

  Read more →
• 

  Eigenface

  An eigenface ( EYE-gən-) is the name given to a set of eigenvectors when used in the computer vision problem of human face recognition. The approach of using eigenfaces for recognition was developed by Sirovich and Kirby and used by Matthew Turk and Alex Pentland in face classification. The eigenvectors are derived from the covariance matrix of the probability distribution over the high-dimensional vector space of face images. The eigenfaces themselves form a basis set of all images used to construct the covariance matrix. This produces dimension reduction by allowing the smaller set of basis images to represent the original training images. Classification can be achieved by comparing how faces are represented by the basis set. == History == The eigenface approach began with a search for a low-dimensional representation of face images. Sirovich and Kirby showed that principal component analysis could be used on a collection of face images to form a set of basis features. These basis images, known as eigenpictures, could be linearly combined to reconstruct images in the original training set. If the training set consists of M images, principal component analysis could form a basis set of N images, where N < M. The reconstruction error is reduced by increasing the number of eigenpictures; however, the number needed is always chosen less than M. For example, if you need to generate a number of N eigenfaces for a training set of M face images, you can say that each face image can be made up of "proportions" of all the K "features" or eigenfaces: Face image1 = (23% of E1) + (2% of E2) + (51% of E3) + ... + (1% En). In 1991 M. Turk and A. Pentland expanded these results and presented the eigenface method of face recognition. In addition to designing a system for automated face recognition using eigenfaces, they showed a way of calculating the eigenvectors of a covariance matrix such that computers of the time could perform eigen-decomposition on a large number of face images. Face images usually occupy a high-dimensional space and conventional principal component analysis was intractable on such data sets. Turk and Pentland's paper demonstrated ways to extract the eigenvectors based on matrices sized by the number of images rather than the number of pixels. Once established, the eigenface method was expanded to include methods of preprocessing to improve accuracy. Multiple manifold approaches were also used to build sets of eigenfaces for different subjects and different features, such as the eyes. == Generation == A set of eigenfaces can be generated by performing a mathematical process called principal component analysis (PCA) on a large set of images depicting different human faces. Informally, eigenfaces can be considered a set of "standardized face ingredients", derived from statistical analysis of many pictures of faces. Any human face can be considered to be a combination of these standard faces. For example, one's face might be composed of the average face plus 10% from eigenface 1, 55% from eigenface 2, and even −3% from eigenface 3. Remarkably, it does not take many eigenfaces combined together to achieve a fair approximation of most faces. Also, because a person's face is not recorded by a digital photograph, but instead as just a list of values (one value for each eigenface in the database used), much less space is taken for each person's face. The eigenfaces that are created will appear as light and dark areas that are arranged in a specific pattern. This pattern is how different features of a face are singled out to be evaluated and scored. There will be a pattern to evaluate symmetry, whether there is any style of facial hair, where the hairline is, or an evaluation of the size of the nose or mouth. Other eigenfaces have patterns that are less simple to identify, and the image of the eigenface may look very little like a face. The technique used in creating eigenfaces and using them for recognition is also used outside of face recognition: handwriting recognition, lip reading, voice recognition, sign language/hand gestures interpretation and medical imaging analysis. Therefore, some do not use the term eigenface, but prefer to use 'eigenimage'. === Practical implementation === To create a set of eigenfaces, one must: Prepare a training set of face images. The pictures constituting the training set should have been taken under the same lighting conditions, and must be normalized to have the eyes and mouths aligned across all images. They must also be all resampled to a common pixel resolution (r × c). Each image is treated as one vector, simply by concatenating the rows of pixels in the original image, resulting in a single column with r × c elements. For this implementation, it is assumed that all images of the training set are stored in a single matrix T, where each column of the matrix is an image. Subtract the mean. The average image a has to be calculated and then subtracted from each original image in T. Calculate the eigenvectors and eigenvalues of the covariance matrix S. Each eigenvector has the same dimensionality (number of components) as the original images, and thus can itself be seen as an image. The eigenvectors of this covariance matrix are therefore called eigenfaces. They are the directions in which the images differ from the mean image. Usually this will be a computationally expensive step (if at all possible), but the practical applicability of eigenfaces stems from the possibility to compute the eigenvectors of S efficiently, without ever computing S explicitly, as detailed below. Choose the principal components. Sort the eigenvalues in descending order and arrange eigenvectors accordingly. The number of principal components k is determined arbitrarily by setting a threshold ε on the total variance. Total variance ⁠ v = ( λ 1 + λ 2 + . . . + λ n ) {\displaystyle v=(\lambda _{1}+\lambda _{2}+...+\lambda _{n})} ⁠, n = number of components, and λ {\displaystyle \lambda } represents component eigenvalue. k is the smallest number that satisfies ( λ 1 + λ 2 + . . . + λ k ) v > ϵ {\displaystyle {\frac {(\lambda _{1}+\lambda _{2}+...+\lambda _{k})}{v}}>\epsilon } These eigenfaces can now be used to represent both existing and new faces: we can project a new (mean-subtracted) image on the eigenfaces and thereby record how that new face differs from the mean face. The eigenvalues associated with each eigenface represent how much the images in the training set vary from the mean image in that direction. Information is lost by projecting the image on a subset of the eigenvectors, but losses are minimized by keeping those eigenfaces with the largest eigenvalues. For instance, working with a 100 × 100 image will produce 10,000 eigenvectors. In practical applications, most faces can typically be identified using a projection on between 100 and 150 eigenfaces, so that most of the 10,000 eigenvectors can be discarded. === Matlab example code === Here is an example of calculating eigenfaces with Extended Yale Face Database B. To evade computational and storage bottleneck, the face images are sampled down by a factor 4×4=16. Note that although the covariance matrix S generates many eigenfaces, only a fraction of those are needed to represent the majority of the faces. For example, to represent 95% of the total variation of all face images, only the first 43 eigenfaces are needed. To calculate this result, implement the following code: === Computing the eigenvectors === Performing PCA directly on the covariance matrix of the images is often computationally infeasible. If small images are used, say 100 × 100 pixels, each image is a point in a 10,000-dimensional space and the covariance matrix S is a matrix of 10,000 × 10,000 = 108 elements. However the rank of the covariance matrix is limited by the number of training examples: if there are N training examples, there will be at most N − 1 eigenvectors with non-zero eigenvalues. If the number of training examples is smaller than the dimensionality of the images, the principal components can be computed more easily as follows. Let T be the matrix of preprocessed training examples, where each column contains one mean-subtracted image. The covariance matrix can then be computed as S = TTT and the eigenvector decomposition of S is given by S v i = T T T v i = λ i v i {\displaystyle \mathbf {Sv} _{i}=\mathbf {T} \mathbf {T} ^{T}\mathbf {v} _{i}=\lambda _{i}\mathbf {v} _{i}} However TTT is a large matrix, and if instead we take the eigenvalue decomposition of T T T u i = λ i u i {\displaystyle \mathbf {T} ^{T}\mathbf {T} \mathbf {u} _{i}=\lambda _{i}\mathbf {u} _{i}} then we notice that by pre-multiplying both sides of the equation with T, we obtain T T T T u i = λ i T u i {\displaystyle \mathbf {T} \mathbf {T} ^{T}\mathbf {T} \mathbf {u} _{i}=\lambda _{i}\mathbf {T} \mathbf {u} _{i}} Meaning that, if ui is an eigenvector of TTT, then vi = Tui is an eigenvector of S. If we have

  Read more →
• 

  Elastic map

  Elastic maps provide a tool for nonlinear dimensionality reduction. By their construction, they are a system of elastic springs embedded in the data space. This system approximates a low-dimensional manifold. The elastic coefficients of this system allow the switch from completely unstructured k-means clustering (zero elasticity) to the estimators located closely to linear PCA manifolds (for high bending and low stretching modules). With some intermediate values of the elasticity coefficients, this system effectively approximates non-linear principal manifolds. This approach is based on a mechanical analogy between principal manifolds, that are passing through "the middle" of the data distribution, and elastic membranes and plates. The method was developed by A.N. Gorban, A.Y. Zinovyev and A.A. Pitenko in 1996–1998. == Energy of elastic map == Let S {\displaystyle {\mathcal {S}}} be a data set in a finite-dimensional Euclidean space. Elastic map is represented by a set of nodes w j {\displaystyle {\bf {w}}_{j}} in the same space. Each datapoint s ∈ S {\displaystyle s\in {\mathcal {S}}} has a host node, namely the closest node w j {\displaystyle {\bf {w}}_{j}} (if there are several closest nodes then one takes the node with the smallest number). The data set S {\displaystyle {\mathcal {S}}} is divided into classes K j = { s | w j is a host of s } {\displaystyle K_{j}=\{s\ |\ {\bf {w}}_{j}{\mbox{ is a host of }}s\}} . The approximation energy D is the distortion D = 1 2 ∑ j = 1 k ∑ s ∈ K j ‖ s − w j ‖ 2 {\displaystyle D={\frac {1}{2}}\sum _{j=1}^{k}\sum _{s\in K_{j}}\|s-{\bf {w}}_{j}\|^{2}} , which is the energy of the springs with unit elasticity which connect each data point with its host node. It is possible to apply weighting factors to the terms of this sum, for example to reflect the standard deviation of the probability density function of any subset of data points { s i } {\displaystyle \{s_{i}\}} . On the set of nodes an additional structure is defined. Some pairs of nodes, ( w i , w j ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j})} , are connected by elastic edges. Call this set of pairs E {\displaystyle E} . Some triplets of nodes, ( w i , w j , w k ) {\displaystyle ({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})} , form bending ribs. Call this set of triplets G {\displaystyle G} . The stretching energy is U E = 1 2 λ ∑ ( w i , w j ) ∈ E ‖ w i − w j ‖ 2 {\displaystyle U_{E}={\frac {1}{2}}\lambda \sum _{({\bf {w}}_{i},{\bf {w}}_{j})\in E}\|{\bf {w}}_{i}-{\bf {w}}_{j}\|^{2}} , The bending energy is U G = 1 2 μ ∑ ( w i , w j , w k ) ∈ G ‖ w i − 2 w j + w k ‖ 2 {\displaystyle U_{G}={\frac {1}{2}}\mu \sum _{({\bf {w}}_{i},{\bf {w}}_{j},{\bf {w}}_{k})\in G}\|{\bf {w}}_{i}-2{\bf {w}}_{j}+{\bf {w}}_{k}\|^{2}} , where λ {\displaystyle \lambda } and μ {\displaystyle \mu } are the stretching and bending moduli respectively. The stretching energy is sometimes referred to as the membrane, while the bending energy is referred to as the thin plate term. For example, on the 2D rectangular grid the elastic edges are just vertical and horizontal edges (pairs of closest vertices) and the bending ribs are the vertical or horizontal triplets of consecutive (closest) vertices. The total energy of the elastic map is thus U = D + U E + U G . {\displaystyle U=D+U_{E}+U_{G}.} The position of the nodes { w j } {\displaystyle \{{\bf {w}}_{j}\}} is determined by the mechanical equilibrium of the elastic map, i.e. its location is such that it minimizes the total energy U {\displaystyle U} . == Expectation-maximization algorithm == For a given splitting of dataset S {\displaystyle {\mathcal {S}}} in classes K j {\displaystyle K_{j}} , minimization of the quadratic functional U {\displaystyle U} is a linear problem with the sparse matrix of coefficients. Therefore, similar to principal component analysis or k-means, a splitting method is used: For given { w j } {\displaystyle \{{\bf {w}}_{j}\}} find { K j } {\displaystyle \{K_{j}\}} ; For given { K j } {\displaystyle \{K_{j}\}} minimize U {\displaystyle U} and find { w j } {\displaystyle \{{\bf {w}}_{j}\}} ; If no change, terminate. This expectation-maximization algorithm guarantees a local minimum of U {\displaystyle U} . For improving the approximation various additional methods are proposed. For example, the softening strategy is used. This strategy starts with a rigid grids (small length, small bending and large elasticity modules λ {\displaystyle \lambda } and μ {\displaystyle \mu } coefficients) and finishes with soft grids (small λ {\displaystyle \lambda } and μ {\displaystyle \mu } ). The training goes in several epochs, each epoch with its own grid rigidness. Another adaptive strategy is growing net: one starts from a small number of nodes and gradually adds new nodes. Each epoch goes with its own number of nodes. == Applications == Most important applications of the method and free software are in bioinformatics for exploratory data analysis and visualisation of multidimensional data, for data visualisation in economics, social and political sciences, as an auxiliary tool for data mapping in geographic informational systems and for visualisation of data of various nature. The method is applied in quantitative biology for reconstructing the curved surface of a tree leaf from a stack of light microscopy images. This reconstruction is used for quantifying the geodesic distances between trichomes and their patterning, which is a marker of the capability of a plant to resist to pathogenes. Recently, the method is adapted as a support tool in the decision process underlying the selection, optimization, and management of financial portfolios. The method of elastic maps has been systematically tested and compared with several machine learning methods on the applied problem of identification of the flow regime of a gas-liquid flow in a pipe. There are various regimes: Single phase water or air flow, Bubbly flow, Bubbly-slug flow, Slug flow, Slug-churn flow, Churn flow, Churn-annular flow, and Annular flow. The simplest and most common method used to identify the flow regime is visual observation. This approach is, however, subjective and unsuitable for relatively high gas and liquid flow rates. Therefore, the machine learning methods are proposed by many authors. The methods are applied to differential pressure data collected during a calibration process. The method of elastic maps provided a 2D map, where the area of each regime is represented. The comparison with some other machine learning methods is presented in Table 1 for various pipe diameters and pressure. Here, ANN stands for the backpropagation artificial neural networks, SVM stands for the support vector machine, SOM for the self-organizing maps. The hybrid technology was developed for engineering applications. In this technology, elastic maps are used in combination with Principal Component Analysis (PCA), Independent Component Analysis (ICA) and backpropagation ANN. The textbook provides a systematic comparison of elastic maps and self-organizing maps (SOMs) in applications to economic and financial decision-making.

  Read more →
• 

  Lattice Miner

  Lattice Miner is a formal concept analysis software tool for the construction, visualization and manipulation of concept lattices. It allows the generation of formal concepts and association rules as well as the transformation of formal contexts via apposition, subposition, reduction and object/attribute generalization, and the manipulation of concept lattices via approximation, projection and selection. Lattice Miner allows also the drawing of nested line diagrams. == Introduction == Formal concept analysis (FCA) is a branch of applied mathematics based on the formalization of concept and concept hierarchy and mainly used as a framework for conceptual clustering and rule mining. Over the last two decades, a collection of tools have emerged to help FCA users visualize and analyze concept lattices. They range from the earliest DOS-based implementations (e.g., ConImp and GLAD) to more recent implementations in Java like ToscanaJ, Galicia, ConExp and Coron. A main issue in the development of FCA tools is to visualize large concept lattices and provide efficient mechanisms to highlight patterns (e.g., concepts, associations) that could be relevant to the user. The initial objective of the FCA tool called Lattice Miner was to focus on visualization mechanisms for the representation of concept lattices, including nested line diagrams. Later on, many other interesting features were integrated into the tool. == Functional architecture of Lattice Miner == Lattice Miner is a Java-based platform whose functions are articulated around a core. The Lattice Miner core provides all low-level operations and structures for the representation and manipulation of contexts, lattices and association rules. Mainly, the core of Lattice Miner consists of three modules: context, concept and association rule modules. The user interface offers a context editor and concept lattice manipulator to assist the user in a set of tasks. The architecture of Lattice Miner is open and modular enough to allow the integration of new features and facilities in each one of its components. === Context module === The context module offers all the basic operations and structures to manipulate binary and valued contexts as well as context decomposition to produce nested line diagrams. Basic context operations include apposition, subposition, generalization, clarification, reduction as well as the complementary context computation. The module provides also the arrow relations (for context reduction and decomposition) [2]. The tool has an input LMB format and recognizes the binary format SLF found in Galicia and the format CEX produced by ConExp. === Concept module === The main function of the concept module is to generate the concepts of the current binary context and construct the corresponding lattice and nested structure (see Figures 2 and 3). It provides the user with basic operators such as projection, selection, and exact search as well as advanced features like pair approximation. Some known algorithms are included in this module such as Bordat’s procedure, Godin’s algorithm and NextClosure algorithm. The approximation feature implemented in Lattice Miner is based on the following idea: given a pair (X,Y) where X ⊆ G, and Y ⊆ M, is there a set of formal concepts (Ai,Bi) which are “close to” (X,Y)? To answer this question, The tool starts to identify the type of couple that the pair (X,Y) represents. It can be a formal concept, a protoconcept, a semiconcept or a preconcept. In the last case, the approximation is given by the interval [(X",X′),(Y′,Y")] and highlighted in the line diagram. === Association rule module === This module includes procedures for computing the (stem) Guigues–Duquenne base using NextClosure algorithm [3], as well as the generic and informative bases. Implications with negation can be obtained using the apposition of a context and its complementary. This module embeds also procedures for the computation of a non-redundant family C of implications and the closure of a set Y of attributes for the given implication set C. === User interface === The initial objective of Lattice Miner was to focus on lattice drawing and visualization either as a flat or nested structure by taking into account the cognitive process of human beings and known principles for lattice drawing (e.g., reducing the number of edge intersections, ensuring diagram symmetry). Some well-known visualization techniques were implemented such as focus & context and fisheye view. The basic idea behind focus & context visualization paradigm is to allow a viewer to see key (important) objects in full detail in the foreground (focus) while at the same time an overview of all the surrounding information (context) remains available in the background. Lattice Miner translates the focus & context paradigm into clear and blurred elements while the size of nodes and the intensity of their color were used to indicate their importance. Various forms of highlighting, labelling and animation are also provided. In order to better handle the display of large lattices, nested line diagrams are offered in the tool. Figure 3 shows the third level of the nested line diagram corresponding to the binary context of Figure 1 where three levels of nesting are defined. Each one of the inner nodes of this diagram represents a combination of attributes from the previous two (outer) levels. Real inner concepts (see the node on the left hand-side of the diagram) are identified by colored nodes while void elements are in grey color. Each node of levels 1 and 2 can be expanded to exhibit its internal line diagram. Both flat and nested diagrams can be saved as an image. Simple (flat) lattices can also be saved as an XML format file.

  Read more →
• 

  Radial basis function network

  In the field of mathematical modeling, a radial basis function network is an artificial neural network that uses radial basis functions as activation functions. The output of the network is a linear combination of radial basis functions of the inputs and neuron parameters. Radial basis function networks have many uses, including function approximation, time series prediction, classification, and system control. They were first formulated in a 1988 paper by Broomhead and Lowe, both researchers at the Royal Signals and Radar Establishment. == Network architecture == Radial basis function (RBF) networks typically have three layers: an input layer, a hidden layer with a non-linear RBF activation function and a linear output layer. The input can be modeled as a vector of real numbers x ∈ R n {\displaystyle \mathbf {x} \in \mathbb {R} ^{n}} . The output of the network is then a scalar function of the input vector, φ : R n → R {\displaystyle \varphi :\mathbb {R} ^{n}\to \mathbb {R} } , and is given by φ ( x ) = ∑ i = 1 N a i ρ ( | | x − c i | | ) {\displaystyle \varphi (\mathbf {x} )=\sum _{i=1}^{N}a_{i}\rho (||\mathbf {x} -\mathbf {c} _{i}||)} where N {\displaystyle N} is the number of neurons in the hidden layer, c i {\displaystyle \mathbf {c} _{i}} is the center vector for neuron i {\displaystyle i} , and a i {\displaystyle a_{i}} is the weight of neuron i {\displaystyle i} in the linear output neuron. Functions that depend only on the distance from a center vector are radially symmetric about that vector, hence the name radial basis function. In the basic form, all inputs are connected to each hidden neuron. The norm is typically taken to be the Euclidean distance (although the Mahalanobis distance appears to perform better with pattern recognition) and the radial basis function is commonly taken to be Gaussian ρ ( ‖ x − c i ‖ ) = exp ⁡ [ − β i ‖ x − c i ‖ 2 ] {\displaystyle \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}=\exp \left[-\beta _{i}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert ^{2}\right]} . The Gaussian basis functions are local to the center vector in the sense that lim | | x | | → ∞ ρ ( ‖ x − c i ‖ ) = 0 {\displaystyle \lim _{||x||\to \infty }\rho (\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert )=0} i.e. changing parameters of one neuron has only a small effect for input values that are far away from the center of that neuron. Given certain mild conditions on the shape of the activation function, RBF networks are universal approximators on a compact subset of R n {\displaystyle \mathbb {R} ^{n}} . This means that an RBF network with enough hidden neurons can approximate any continuous function on a closed, bounded set with arbitrary precision. The parameters a i {\displaystyle a_{i}} , c i {\displaystyle \mathbf {c} _{i}} , and β i {\displaystyle \beta _{i}} are determined in a manner that optimizes the fit between φ {\displaystyle \varphi } and the data. === Normalization === ==== Normalized architecture ==== In addition to the above unnormalized architecture, RBF networks can be normalized. In this case the mapping is φ ( x ) = d e f ∑ i = 1 N a i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N a i u ( ‖ x − c i ‖ ) {\displaystyle \varphi (\mathbf {x} )\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\sum _{i=1}^{N}a_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}a_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} where u ( ‖ x − c i ‖ ) = d e f ρ ( ‖ x − c i ‖ ) ∑ j = 1 N ρ ( ‖ x − c j ‖ ) {\displaystyle u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\frac {\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{j=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{j}\right\Vert {\big )}}}} is known as a normalized radial basis function. ==== Theoretical motivation for normalization ==== There is theoretical justification for this architecture in the case of stochastic data flow. Assume a stochastic kernel approximation for the joint probability density P ( x ∧ y ) = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) σ ( | y − e i | ) {\displaystyle P\left(\mathbf {x} \land y\right)={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,\sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}} where the weights c i {\displaystyle \mathbf {c} _{i}} and e i {\displaystyle e_{i}} are exemplars from the data and we require the kernels to be normalized ∫ ρ ( ‖ x − c i ‖ ) d n x = 1 {\displaystyle \int \rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}\,d^{n}\mathbf {x} =1} and ∫ σ ( | y − e i | ) d y = 1 {\displaystyle \int \sigma {\big (}\left\vert y-e_{i}\right\vert {\big )}\,dy=1} . The probability densities in the input and output spaces are P ( x ) = ∫ P ( x ∧ y ) d y = 1 N ∑ i = 1 N ρ ( ‖ x − c i ‖ ) {\displaystyle P\left(\mathbf {x} \right)=\int P\left(\mathbf {x} \land y\right)\,dy={1 \over N}\sum _{i=1}^{N}\,\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and The expectation of y given an input x {\displaystyle \mathbf {x} } is φ ( x ) = d e f E ( y ∣ x ) = ∫ y P ( y ∣ x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)\ {\stackrel {\mathrm {def} }{=}}\ E\left(y\mid \mathbf {x} \right)=\int y\,P\left(y\mid \mathbf {x} \right)dy} where P ( y ∣ x ) {\displaystyle P\left(y\mid \mathbf {x} \right)} is the conditional probability of y given x {\displaystyle \mathbf {x} } . The conditional probability is related to the joint probability through Bayes' theorem P ( y ∣ x ) = P ( x ∧ y ) P ( x ) {\displaystyle P\left(y\mid \mathbf {x} \right)={\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}} which yields φ ( x ) = ∫ y P ( x ∧ y ) P ( x ) d y {\displaystyle \varphi \left(\mathbf {x} \right)=\int y\,{\frac {P\left(\mathbf {x} \land y\right)}{P\left(\mathbf {x} \right)}}\,dy} . This becomes φ ( x ) = ∑ i = 1 N e i ρ ( ‖ x − c i ‖ ) ∑ i = 1 N ρ ( ‖ x − c i ‖ ) = ∑ i = 1 N e i u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)={\frac {\sum _{i=1}^{N}e_{i}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}{\sum _{i=1}^{N}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}}}=\sum _{i=1}^{N}e_{i}u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} when the integrations are performed. === Local linear models === It is sometimes convenient to expand the architecture to include local linear models. In that case the architectures become, to first order, φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) ρ ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} and φ ( x ) = ∑ i = 1 N ( a i + b i ⋅ ( x − c i ) ) u ( ‖ x − c i ‖ ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{N}\left(a_{i}+\mathbf {b} _{i}\cdot \left(\mathbf {x} -\mathbf {c} _{i}\right)\right)u{\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )}} in the unnormalized and normalized cases, respectively. Here b i {\displaystyle \mathbf {b} _{i}} are weights to be determined. Higher order linear terms are also possible. This result can be written φ ( x ) = ∑ i = 1 2 N ∑ j = 1 n e i j v i j ( x − c i ) {\displaystyle \varphi \left(\mathbf {x} \right)=\sum _{i=1}^{2N}\sum _{j=1}^{n}e_{ij}v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}} where e i j = { a i , if i ∈ [ 1 , N ] b i j , if i ∈ [ N + 1 , 2 N ] {\displaystyle e_{ij}={\begin{cases}a_{i},&{\mbox{if }}i\in [1,N]\\b_{ij},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} and v i j ( x − c i ) = d e f { δ i j ρ ( ‖ x − c i ‖ ) , if i ∈ [ 1 , N ] ( x i j − c i j ) ρ ( ‖ x − c i ‖ ) , if i ∈ [ N + 1 , 2 N ] {\displaystyle v_{ij}{\big (}\mathbf {x} -\mathbf {c} _{i}{\big )}\ {\stackrel {\mathrm {def} }{=}}\ {\begin{cases}\delta _{ij}\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [1,N]\\\left(x_{ij}-c_{ij}\right)\rho {\big (}\left\Vert \mathbf {x} -\mathbf {c} _{i}\right\Vert {\big )},&{\mbox{if }}i\in [N+1,2N]\end{cases}}} in the unnormalized case and in the normalized case. Here δ i j {\displaystyle \delta _{ij}} is a Kronecker delta function defined as δ i j = { 1 , if i = j 0 , if i ≠ j {\displaystyle \delta _{ij}={\begin{cases}1,&{\mbox{if }}i=j\\0,&{\mbox{if }}i\neq j\end{cases}}} . == Training == RBF networks are typically trained from pairs of input and target values x ( t ) , y ( t ) {\displaystyle \mathbf {x} (t),y(t)} , t = 1 , … , T {\displaystyle t=1,\dots ,T} by a two-step algorithm. In the first step, the center vectors c i {\displaystyle \mathbf {c} _{i}} of the RBF functions in the hidden layer

  Read more →
• 

  Photoanalysis

  Photoanalysis (or photo analysis) refers to the study of pictures to compile various types of data, for example, to measure the size distribution of virtually anything that can be captured by photo. Photoanalysis technology has changed the way mines and mills quantify fragmented material. Images are an effective way to document conditions before, after, and even during blasting activities. The technology is advancing at a high rate, and lenses, storage media memory, light sensitivity and resolution have been improving steadily. Today's digital cameras and camcorders include high-resolution optics, compact size, automatic time and date stamps, good battery life, shutters to freeze motion, and computers to autofocus and eliminate jitter using image stabilization. == Mining == Photoanalysis in mining operations can provide an automated system that forewarns a company of potential problems with materials, leading to economies and reduced damage caused from over-sized materials. It can also help determine the effectiveness of blasts. A company can use this technology to monitor materials moving on a conveyor belt in an underground environment, to measure piles left over from a blast, and even measure the amount of material being carried by dump trucks or vessels to a destination. Photoanalysis is being used on SAG mills worldwide to control the size of rock being crushed. Companies are using this technology to determine the size of particles being processed in the SAG Mill.[1] Archived 2009-05-23 at the Wayback Machine Having oversize material entering the SAG mill makes an operation less efficient, costing companies money in electrical and maintenance costs. Photoanalysis technology can eliminate unwanted material before it enters the mill, keeping rock crushing costs low. == Forestry == Wood chip size can affect the overall quality of a product. With automated photoanalysis systems, companies can remove any unwanted wrong-size particles without stopping their mill process. Photoanalysis can affect how efficiently forestry companies operate. In mills worldwide, photoanalysis technology is improving the use of lumber products, cutting back on the amount of trees being used to operate, and saving companies money through quality control optimization.[2] With the current downturn in the North American forestry industry, operators are looking at making their mills more efficient and effective when processing materials. Photoanalysis technology helps identify any weaknesses in the process by continuously monitoring different sections of an operation. == Agriculture == Agricultural companies can, using photoanalysis, monitor conveyor belts of food without contaminating the product by touching it. Other benefits of photoanalysis systems include: Automated removal of any unwanted material on food conveyor Improved quality control for the most important parts of the agricultural process Pinpoint accuracy that helps the efficiency and effectiveness of product handling techniques The importance of photoanalysis technology is being noticed by the agricultural industry as it identifies any unwanted materials going through the process. In an example, if a mouse is on a conveyor of corn, photoanalysis technology would be able to identify the unwanted object and remove it before it contaminates the whole process. == Origins of photoanalysis technology == Photoanalysis technology was created by using the Waterloo Image Enhancement Process in the 1980s. After further development of the imaging process with explosives producer DuPont, engineers Tom Palangio and Takis Katsabanis began selling photoanalysis software commercially. They later renamed the process WipFrag, standing for Waterloo Image Process Fragmentation Today, photoanalysis technology has evolved into stabilized and portable systems that can automatically capture and analyze results instantly. Thousands of these products are currently being used around the world to measure fragmented material. == Photoanalysis equipment photos == == Fragmentation analysis == Fragmentation analysis is becoming a popular term in mining, agricultural and forestry industries. With the majority of money in these industries directed towards the proper sizing of materials, companies are using fragmentation analysis to determine various factors within an operation.[3] The two main ways a company keeps track of fragmented material are through manual and automated sieving procedures. Manual sieving involves extracting a sample of material to analyze the size distribution. The results can be tabulated within two days. Automated sieving is an advanced way of sieving materials running through a process. Without having to extract the material, photoanalysis can take place, allowing for immediate results with pinpoint accuracy. == Blast Fragmentation Software == Operators are using fragmentation analysis to determine the effectiveness of various blasts. With automated sieving technology, workers can track the success of these blasts and receive instant results. Companies are using these results to determine what blasting method yielded the best results for their specific operation. The common variables associated with blast optimization are the provided Particle Size Distribution (PSD) from a shovel fragmentation system, geology including rock type and fracturing, and energy factor. By using photoanalysis the fragmented materials can be monitored, offering pinpoint accuracy and allowing mine operators to make adjustments to future blasting procedures. See Optical Granulometry to view the automated sieving process. == Pre-crushing analysis == Maintenance costs can be significantly reduced if an operation focuses on the fragmentation of the particles passing through their process. Automated sieving systems can detect and help remove any oversize material before it enters the crusher and causes maintenance problems. It also helps determine the effectiveness of the mining process prior to crushing; the sizing of material is always a critical part of operations in the mining, forestry and agricultural industries. Having an analysis taking place at every major point in an operation allows for the proper tracking of material being processed. Engineers can then determine what part of the process needs improving based solely on the size of material. == Post-crushing analysis == Measuring how effective industrial crushers are, can help save a company millions of dollars in energy costs on an annual basis. There are two components that affect a typical crusher: the size of the material inputted, and the speed at which the crusher is moving. If the user can find a perfect balance between these two components, the materials will be crushed to the right size in the shortest time possible. Meeting the material standards set by governments and large companies can be hard. Having a post-crushing analysis taking place ensures that no oversize material gets shipped; eliminating the chance of getting fined for not meeting industry specifications.

  Read more →
• 

  K-nearest neighbors algorithm

  In statistics, the k-nearest neighbors algorithm (k-NN) is a non-parametric supervised learning method. It was first developed by Evelyn Fix and Joseph Hodges in 1951, and later expanded by Thomas Cover. In classification, a new example is assigned a label based on the labels of its k nearest training examples; in regression, the prediction is computed from the values of those neighbors. Most often, it is used for classification, as a k-NN classifier, the output of which is a class membership. An object is classified by a plurality vote of its neighbors, with the object being assigned to the class most common among its k nearest neighbors (k is a positive integer, typically small). If k = 1, then the object is simply assigned to the class of that single nearest neighbor. The k-NN algorithm can also be generalized for regression. In k-NN regression, also known as nearest neighbor smoothing, the output is the property value for the object. This value is the average of the values of k nearest neighbors. If k = 1, then the output is simply assigned to the value of that single nearest neighbor, also known as nearest neighbor interpolation. For both classification and regression, a useful technique can be to assign weights to the contributions of the neighbors, so that nearer neighbors contribute more to the average than distant ones. For example, a common weighting scheme consists of giving each neighbor a weight of 1/d, where d is the distance to the neighbor. The input consists of the k closest training examples in a data set. The neighbors are taken from a set of objects for which the class (for k-NN classification) or the object property value (for k-NN regression) is known. This can be thought of as the training set for the algorithm, though no explicit training step is required. A peculiarity (sometimes even a disadvantage) of the k-NN algorithm is its sensitivity to the local structure of the data. In k-NN classification the function is only approximated locally and all computation is deferred until function evaluation. Since this algorithm relies on distance, if the features represent different physical units or come in vastly different scales, then feature-wise normalizing of the training data can greatly improve its accuracy. == Statistical setting == Suppose we have pairs ( X 1 , Y 1 ) , ( X 2 , Y 2 ) , … , ( X n , Y n ) {\displaystyle (X_{1},Y_{1}),(X_{2},Y_{2}),\dots ,(X_{n},Y_{n})} taking values in R d × { 1 , 2 } {\displaystyle \mathbb {R} ^{d}\times \{1,2\}} , where Y is the class label of X, so that X | Y = r ∼ P r {\displaystyle X|Y=r\sim P_{r}} for r = 1 , 2 {\displaystyle r=1,2} (and probability distributions P r {\displaystyle P_{r}} ). Given some norm ‖ ⋅ ‖ {\displaystyle \|\cdot \|} on R d {\displaystyle \mathbb {R} ^{d}} and a point x ∈ R d {\displaystyle x\in \mathbb {R} ^{d}} , let ( X ( 1 ) , Y ( 1 ) ) , … , ( X ( n ) , Y ( n ) ) {\displaystyle (X_{(1)},Y_{(1)}),\dots ,(X_{(n)},Y_{(n)})} be a reordering of the training data such that ‖ X ( 1 ) − x ‖ ≤ ⋯ ≤ ‖ X ( n ) − x ‖ {\displaystyle \|X_{(1)}-x\|\leq \dots \leq \|X_{(n)}-x\|} . == Algorithm == The training examples are vectors in a multidimensional feature space, each with a class label. The training phase of the algorithm consists only of storing the feature vectors and class labels of the training samples. In the classification phase, k is a user-defined constant, and an unlabeled vector (a query or test point) is classified by assigning the label which is most frequent among the k training samples nearest to that query point. A commonly used distance metric for continuous variables is Euclidean distance. For discrete variables, such as for text classification, another metric can be used, such as the overlap metric (or Hamming distance). In the context of gene expression microarray data, for example, k-NN has been employed with correlation coefficients, such as Pearson and Spearman, as a metric. Often, the classification accuracy of k-NN can be improved significantly if the distance metric is learned with specialized algorithms such as large margin nearest neighbor or neighborhood components analysis. A drawback of the basic "majority voting" classification occurs when the class distribution is skewed. That is, examples of a more frequent class tend to dominate the prediction of the new example, because they tend to be common among the k nearest neighbors due to their large number. One way to overcome this problem is to weight the classification, taking into account the distance from the test point to each of its k nearest neighbors. The class (or value, in regression problems) of each of the k nearest points is multiplied by a weight proportional to the inverse of the distance from that point to the test point. Another way to overcome skew is by abstraction in data representation. For example, in a self-organizing map (SOM), each node is a representative (a center) of a cluster of similar points, regardless of their density in the original training data. k-NN can then be applied to the SOM. == Parameter selection == The best choice of k depends upon the data; generally, larger values of k reduces effect of the noise on the classification, but make boundaries between classes less distinct. A good k can be selected by various heuristic techniques (see hyperparameter optimization). The special case where the class is predicted to be the class of the closest training sample (i.e. when k = 1) is called the nearest neighbor algorithm. The accuracy of the k-NN algorithm can be severely degraded by the presence of noisy or irrelevant features, or if the feature scales are not consistent with their importance. Much research effort has been put into selecting or scaling features to improve classification. A particularly popular approach is the use of evolutionary algorithms to optimize feature scaling. Another popular approach is to scale features by the mutual information of the training data with the training classes. In binary (two class) classification problems, it is helpful to choose k to be an odd number as this avoids tied votes. One popular way of choosing the empirically optimal k in this setting is via bootstrap method. == The 1-nearest neighbor classifier == The most intuitive nearest neighbour type classifier is the one nearest neighbour classifier that assigns a point x to the class of its closest neighbour in the feature space, that is C n 1 n n ( x ) = Y ( 1 ) {\displaystyle C_{n}^{1nn}(x)=Y_{(1)}} . As the size of training data set approaches infinity, the one nearest neighbour classifier guarantees an error rate of no worse than twice the Bayes error rate (the minimum achievable error rate given the distribution of the data). == The weighted nearest neighbour classifier == The k-nearest neighbour classifier can be viewed as assigning the k nearest neighbours a weight 1 / k {\displaystyle 1/k} and all others 0 weight. This can be generalised to weighted nearest neighbour classifiers. That is, where the ith nearest neighbour is assigned a weight w n i {\displaystyle w_{ni}} , with ∑ i = 1 n w n i = 1 {\textstyle \sum _{i=1}^{n}w_{ni}=1} . An analogous result on the strong consistency of weighted nearest neighbour classifiers also holds. Let C n w n n {\displaystyle C_{n}^{wnn}} denote the weighted nearest classifier with weights { w n i } i = 1 n {\displaystyle \{w_{ni}\}_{i=1}^{n}} . Subject to regularity conditions, which in asymptotic theory are conditional variables which require assumptions to differentiate among parameters with some criteria. On the class distributions the excess risk has the following asymptotic expansion R R ( C n w n n ) − R R ( C Bayes ) = ( B 1 s n 2 + B 2 t n 2 ) { 1 + o ( 1 ) } , {\displaystyle {\mathcal {R}}_{\mathcal {R}}(C_{n}^{wnn})-{\mathcal {R}}_{\mathcal {R}}(C^{\text{Bayes}})=\left(B_{1}s_{n}^{2}+B_{2}t_{n}^{2}\right)\{1+o(1)\},} for constants B 1 {\displaystyle B_{1}} and B 2 {\displaystyle B_{2}} where s n 2 = ∑ i = 1 n w n i 2 {\displaystyle s_{n}^{2}=\sum _{i=1}^{n}w_{ni}^{2}} and t n = n − 2 / d ∑ i = 1 n w n i { i 1 + 2 / d − ( i − 1 ) 1 + 2 / d } {\displaystyle t_{n}=n^{-2/d}\sum _{i=1}^{n}w_{ni}\left\{i^{1+2/d}-(i-1)^{1+2/d}\right\}} . The optimal weighting scheme { w n i ∗ } i = 1 n {\displaystyle \{w_{ni}^{}\}_{i=1}^{n}} , that balances the two terms in the display above, is given as follows: set k ∗ = ⌊ B n 4 d + 4 ⌋ {\displaystyle k^{}=\lfloor Bn^{\frac {4}{d+4}}\rfloor } , w n i ∗ = 1 k ∗ [ 1 + d 2 − d 2 k ∗ 2 / d { i 1 + 2 / d − ( i − 1 ) 1 + 2 / d } ] {\displaystyle w_{ni}^{}={\frac {1}{k^{}}}\left[1+{\frac {d}{2}}-{\frac {d}{2{k^{}}^{2/d}}}\{i^{1+2/d}-(i-1)^{1+2/d}\}\right]} for i = 1 , 2 , … , k ∗ {\displaystyle i=1,2,\dots ,k^{}} and w n i ∗ = 0 {\displaystyle w_{ni}^{}=0} for i = k ∗ + 1 , … , n {\displaystyle i=k^{}+1,\dots ,n} . With optimal weights the dominant term in the asymptotic expansion of the excess risk is O ( n − 4 d + 4 ) {\displaystyle {\mathcal {O}}(n^{-{\frac {4}{d+4}}})}

  Read more →
• 

  Low-rank approximation

  In mathematics, low-rank approximation refers to the process of approximating a given matrix by a matrix of lower rank. More precisely, it is a minimization problem, in which the cost function measures the fit between a given matrix (the data) and an approximating matrix (the optimization variable), subject to a constraint that the approximating matrix has reduced rank. The problem is used for mathematical modeling and data compression. The rank constraint is related to a constraint on the complexity of a model that fits the data. In applications, often there are other constraints on the approximating matrix apart from the rank constraint, e.g., non-negativity and Hankel structure. Low-rank approximation is closely related to numerous other techniques, including principal component analysis, factor analysis, total least squares, latent semantic analysis, orthogonal regression, and dynamic mode decomposition. == Definition == Given structure specification S : R n p → R m × n {\displaystyle {\mathcal {S}}:\mathbb {R} ^{n_{p}}\to \mathbb {R} ^{m\times n}} , vector of structure parameters p ∈ R n p {\displaystyle p\in \mathbb {R} ^{n_{p}}} , norm ‖ ⋅ ‖ {\displaystyle \|\cdot \|} , and desired rank r {\displaystyle r} , minimize over p ^ ‖ p − p ^ ‖ subject to rank ⁡ ( S ( p ^ ) ) ≤ r . {\displaystyle {\text{minimize}}\quad {\text{over }}{\widehat {p}}\quad \|p-{\widehat {p}}\|\quad {\text{subject to}}\quad \operatorname {rank} {\big (}{\mathcal {S}}({\widehat {p}}){\big )}\leq r.} == Applications == Linear system identification, in which case the approximating matrix is Hankel structured. Machine learning, in which case the approximating matrix is nonlinearly structured. Recommender systems, in which cases the data matrix has missing values and the approximation is categorical. Distance matrix completion, in which case there is a positive definiteness constraint. Natural language processing, in which case the approximation is nonnegative. Computer algebra, in which case the approximation is Sylvester structured. Matrix product states, in which case the approximation is usually rescaled to have fixed Frobenius norm. == Basic low-rank approximation problem == The unstructured problem with fit measured by the Frobenius norm, i.e., minimize over D ^ ‖ D − D ^ ‖ F subject to rank ⁡ ( D ^ ) ≤ r {\displaystyle {\text{minimize}}\quad {\text{over }}{\widehat {D}}\quad \|D-{\widehat {D}}\|_{\text{F}}\quad {\text{subject to}}\quad \operatorname {rank} {\big (}{\widehat {D}}{\big )}\leq r} has an analytic solution in terms of the singular value decomposition of the data matrix. The result is referred to as the matrix approximation lemma or Eckart–Young–Mirsky theorem. This problem was originally solved by Erhard Schmidt in the infinite dimensional context of integral operators (although his methods easily generalize to arbitrary compact operators on Hilbert spaces) and later rediscovered by C. Eckart and G. Young. L. Mirsky generalized the result to arbitrary unitarily invariant norms. Let D = U Σ V ⊤ ∈ R m × n , m ≥ n {\displaystyle D=U\Sigma V^{\top }\in \mathbb {R} ^{m\times n},\quad m\geq n} be the singular value decomposition of D {\displaystyle D} , where Σ =: diag ⁡ ( σ 1 , … , σ r ) {\displaystyle \Sigma =:\operatorname {diag} (\sigma _{1},\ldots ,\sigma _{r})} , where r ≤ min { m , n } = n {\displaystyle r\leq \min\{m,n\}=n} , is the m × n {\displaystyle m\times n} rectangular diagonal matrix with r {\displaystyle r} non-zero singular values σ 1 ≥ … ≥ σ r > σ r + 1 = … = σ n = 0 {\displaystyle \sigma _{1}\geq \ldots \geq \sigma _{r}>\sigma _{r+1}=\ldots =\sigma _{n}=0} . For a given k ∈ { 1 , … , r } {\displaystyle k\in \{1,\dots ,r\}} , partition U {\displaystyle U} , Σ {\displaystyle \Sigma } , and V {\displaystyle V} as follows: U =: [ U 1 U 2 ] , Σ =: [ Σ 1 0 0 Σ 2 ] , and V =: [ V 1 V 2 ] , {\displaystyle U=:{\begin{bmatrix}U_{1}&U_{2}\end{bmatrix}},\quad \Sigma =:{\begin{bmatrix}\Sigma _{1}&0\\0&\Sigma _{2}\end{bmatrix}},\quad {\text{and}}\quad V=:{\begin{bmatrix}V_{1}&V_{2}\end{bmatrix}},} where U 1 {\displaystyle U_{1}} is m × k {\displaystyle m\times k} , Σ 1 {\displaystyle \Sigma _{1}} is k × k {\displaystyle k\times k} , and V 1 {\displaystyle V_{1}} is n × k {\displaystyle n\times k} . Then the rank k {\displaystyle k} matrix D ^ ∗ := U 1 Σ 1 V 1 ⊤ , {\displaystyle {\widehat {D}}^{}:=U_{1}\Sigma _{1}V_{1}^{\top },} obtained from the truncated singular value decomposition is such that ‖ D − D ^ ∗ ‖ F = min rank ⁡ ( D ^ ) ≤ k ‖ D − D ^ ‖ F = σ k + 1 2 + ⋯ + σ r 2 . {\displaystyle \|D-{\widehat {D}}^{}\|_{\text{F}}=\min _{\operatorname {rank} ({\widehat {D}})\leq k}\|D-{\widehat {D}}\|_{\text{F}}={\sqrt {\sigma _{k+1}^{2}+\cdots +\sigma _{r}^{2}}}.} The minimizer D ^ ∗ {\displaystyle {\widehat {D}}^{}} is unique if and only if σ k > σ k + 1 {\displaystyle \sigma _{k}>\sigma _{k+1}} . == Proof of Eckart–Young–Mirsky theorem (for spectral norm) == Let A ∈ R m × n {\displaystyle A\in \mathbb {R} ^{m\times n}} be a real (possibly rectangular) matrix with m ≤ n {\displaystyle m\leq n} . Suppose that A = U Σ V ⊤ {\displaystyle A=U\Sigma V^{\top }} is the singular value decomposition of A {\displaystyle A} . Recall that U {\displaystyle U} and V {\displaystyle V} are orthogonal matrices, and Σ {\displaystyle \Sigma } is an m × n {\displaystyle m\times n} diagonal matrix with entries ( σ 1 , σ 2 , ⋯ , σ m ) {\displaystyle (\sigma _{1},\sigma _{2},\cdots ,\sigma _{m})} such that σ 1 ≥ σ 2 ≥ ⋯ ≥ σ m ≥ 0 {\displaystyle \sigma _{1}\geq \sigma _{2}\geq \cdots \geq \sigma _{m}\geq 0} . We claim that the best rank- k {\displaystyle k} approximation to A {\displaystyle A} in the spectral norm, denoted by ‖ ⋅ ‖ 2 {\displaystyle \|\cdot \|_{2}} , is given by A k := ∑ i = 1 k σ i u i v i ⊤ {\displaystyle A_{k}:=\sum _{i=1}^{k}\sigma _{i}u_{i}v_{i}^{\top }} where u i {\displaystyle u_{i}} and v i {\displaystyle v_{i}} denote the i {\displaystyle i} th column of U {\displaystyle U} and V {\displaystyle V} , respectively. First, note that we have ‖ A − A k ‖ 2 = ‖ ∑ i = 1 n σ i u i v i ⊤ − ∑ i = 1 k σ i u i v i ⊤ ‖ 2 = ‖ ∑ i = k + 1 n σ i u i v i ⊤ ‖ 2 = σ k + 1 {\displaystyle \|A-A_{k}\|_{2}=\left\|\sum _{i=1}^{\color {red}{n}}\sigma _{i}u_{i}v_{i}^{\top }-\sum _{i=1}^{\color {red}{k}}\sigma _{i}u_{i}v_{i}^{\top }\right\|_{2}=\left\|\sum _{i=\color {red}{k+1}}^{n}\sigma _{i}u_{i}v_{i}^{\top }\right\|_{2}=\sigma _{k+1}} Therefore, we need to show that if B k = X Y ⊤ {\displaystyle B_{k}=XY^{\top }} where X {\displaystyle X} and Y {\displaystyle Y} have k {\displaystyle k} columns then ‖ A − A k ‖ 2 = σ k + 1 ≤ ‖ A − B k ‖ 2 {\displaystyle \|A-A_{k}\|_{2}=\sigma _{k+1}\leq \|A-B_{k}\|_{2}} . Since Y {\displaystyle Y} has k {\displaystyle k} columns, then there must be a nontrivial linear combination of the first k + 1 {\displaystyle k+1} columns of V {\displaystyle V} , i.e., w = γ 1 v 1 + ⋯ + γ k + 1 v k + 1 , {\displaystyle w=\gamma _{1}v_{1}+\cdots +\gamma _{k+1}v_{k+1},} such that Y ⊤ w = 0 {\displaystyle Y^{\top }w=0} . Without loss of generality, we can scale w {\displaystyle w} so that ‖ w ‖ 2 = 1 {\displaystyle \|w\|_{2}=1} or (equivalently) γ 1 2 + ⋯ + γ k + 1 2 = 1 {\displaystyle \gamma _{1}^{2}+\cdots +\gamma _{k+1}^{2}=1} . Therefore, ‖ A − B k ‖ 2 2 ≥ ‖ ( A − B k ) w ‖ 2 2 = ‖ A w ‖ 2 2 = γ 1 2 σ 1 2 + ⋯ + γ k + 1 2 σ k + 1 2 ≥ σ k + 1 2 . {\displaystyle \|A-B_{k}\|_{2}^{2}\geq \|(A-B_{k})w\|_{2}^{2}=\|Aw\|_{2}^{2}=\gamma _{1}^{2}\sigma _{1}^{2}+\cdots +\gamma _{k+1}^{2}\sigma _{k+1}^{2}\geq \sigma _{k+1}^{2}.} The result follows by taking the square root of both sides of the above inequality. == Proof of Eckart–Young–Mirsky theorem (for Frobenius norm) == Let A ∈ R m × n {\displaystyle A\in \mathbb {R} ^{m\times n}} be a real (possibly rectangular) matrix with m ≤ n {\displaystyle m\leq n} . Suppose that A = U Σ V ⊤ {\displaystyle A=U\Sigma V^{\top }} is the singular value decomposition of A {\displaystyle A} . We claim that the best rank k {\displaystyle k} approximation to A {\displaystyle A} in the Frobenius norm, denoted by ‖ ⋅ ‖ F {\displaystyle \|\cdot \|_{F}} , is given by A k = ∑ i = 1 k σ i u i v i ⊤ {\displaystyle A_{k}=\sum _{i=1}^{k}\sigma _{i}u_{i}v_{i}^{\top }} where u i {\displaystyle u_{i}} and v i {\displaystyle v_{i}} denote the i {\displaystyle i} th column of U {\displaystyle U} and V {\displaystyle V} , respectively. First, note that we have ‖ A − A k ‖ F 2 = ‖ ∑ i = k + 1 n σ i u i v i ⊤ ‖ F 2 = ∑ i = k + 1 n σ i 2 {\displaystyle \|A-A_{k}\|_{F}^{2}=\left\|\sum _{i=k+1}^{n}\sigma _{i}u_{i}v_{i}^{\top }\right\|_{F}^{2}=\sum _{i=k+1}^{n}\sigma _{i}^{2}} Therefore, we need to show that if B k = X Y ⊤ {\displaystyle B_{k}=XY^{\top }} where X {\displaystyle X} and Y {\displaystyle Y} have k {\displaystyle k} columns then ‖ A − A k ‖ F 2 = ∑ i = k + 1 n σ i 2 ≤ ‖ A − B k ‖ F 2 . {\displaystyle \|A-A_{k}\|_{F}^{2}=\sum _{i=k+1}^{n}\sigma _{i}^{2}\leq \|A-B_{k}\|_{F}^{2}.} By the triangle inequality with the spectral norm

  Read more →