AI App Use In Hindi

AI App Use In Hindi — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Uniform convergence in probability

    Uniform convergence in probability

    Uniform convergence in probability is a form of convergence in probability in statistical asymptotic theory and probability theory. It means that, under certain conditions, the empirical frequencies of all events in a certain event-family uniformly converge to their theoretical probabilities. Uniform convergence in probability has applications to statistics as well as machine learning as part of statistical learning theory. Specifically, the Glivenko-Cantelli theorem and the homonymous classes of functions are fundamentally related to uniform convergence. The law of large numbers says that, for each single event A {\displaystyle A} , its empirical frequency in a sequence of independent trials converges (with high probability) to its theoretical probability. In many application however, the need arises to judge simultaneously the probabilities of events of an entire class S {\displaystyle S} from one and the same sample. Moreover, it, is required that the relative frequency of the events converge to the probability uniformly over the entire class of events S {\displaystyle S} . The Uniform Convergence Theorem gives a sufficient condition for this convergence to hold. Roughly, if the event-family is sufficiently simple (its VC dimension is sufficiently small) then uniform convergence holds. == Definitions == For a class of predicates H {\displaystyle H} defined on a set X {\displaystyle X} and a set of samples x = ( x 1 , x 2 , … , x m ) {\displaystyle x=(x_{1},x_{2},\dots ,x_{m})} , where x i ∈ X {\displaystyle x_{i}\in X} , the empirical frequency of h ∈ H {\displaystyle h\in H} on x {\displaystyle x} is Q ^ x ( h ) = 1 m | { i : 1 ≤ i ≤ m , h ( x i ) = 1 } | . {\displaystyle {\widehat {Q}}_{x}(h)={\frac {1}{m}}|\{i:1\leq i\leq m,h(x_{i})=1\}|.} The theoretical probability of h ∈ H {\displaystyle h\in H} is defined as Q P ( h ) = P { y ∈ X : h ( y ) = 1 } . {\displaystyle Q_{P}(h)=P\{y\in X:h(y)=1\}.} The Uniform Convergence Theorem states, roughly, that if H {\displaystyle H} is "simple" and we draw samples independently (with replacement) from X {\displaystyle X} according to any distribution P {\displaystyle P} , then with high probability, the empirical frequency will be close to its expected value, which is the theoretical probability. Here "simple" means that the Vapnik–Chervonenkis dimension of the class H {\displaystyle H} is small relative to the size of the sample. In other words, a sufficiently simple collection of functions behaves roughly the same on a small random sample as it does on the distribution as a whole. The Uniform Convergence Theorem was first proved by Vapnik and Chervonenkis using the concept of growth function. == Uniform Convergence Theorem == The statement of the Uniform Convergence Theorem is as follows: If H {\displaystyle H} is a set of { 0 , 1 } {\displaystyle \{0,1\}} -valued functions defined on a set X {\displaystyle X} and P {\displaystyle P} is a probability distribution on X {\displaystyle X} then for ε > 0 {\displaystyle \varepsilon >0} and m {\displaystyle m} a positive integer, we have: P m { | Q P ( h ) − Q x ^ ( h ) | ≥ ε for some h ∈ H } ≤ 4 Π H ( 2 m ) e − ε 2 m / 8 . {\displaystyle P^{m}\{|Q_{P}(h)-{\widehat {Q_{x}}}(h)|\geq \varepsilon {\text{ for some }}h\in H\}\leq 4\Pi _{H}(2m)e^{-\varepsilon ^{2}m/8}.} In the above, for any x ∈ X m , {\displaystyle x\in X^{m},} Q P ( h ) = P { ( y ∈ X : h ( y ) = 1 } , {\displaystyle Q_{P}(h)=P\{(y\in X:h(y)=1\},} Q ^ x ( h ) = 1 m | { i : 1 ≤ i ≤ m , h ( x i ) = 1 } | {\displaystyle {\widehat {Q}}_{x}(h)={\frac {1}{m}}|\{i:1\leq i\leq m,h(x_{i})=1\}|} and | x | = m . {\displaystyle |x|=m.} P m {\displaystyle P^{m}} indicates that the probability is taken over x {\displaystyle x} consisting of m {\displaystyle m} i.i.d. draws from the distribution P . {\displaystyle P.} Finally, the growth function Π H {\displaystyle \Pi _{H}} is defined in the following way, for any { 0 , 1 } {\displaystyle \{0,1\}} -valued functions H {\displaystyle H} over X {\displaystyle X} and for any natural number m {\displaystyle m} : Π H ( m ) = max | { h ∩ D : D ⊆ X , | D | = m , h ∈ H } | . {\displaystyle \Pi _{H}(m)=\max |\{h\cap D:D\subseteq X,|D|=m,h\in H\}|.} From the point of view of Learning Theory one can consider H {\displaystyle H} to be the Concept/Hypothesis class defined over the instance set X {\displaystyle X} . Crucially, the Sauer–Shelah lemma implies that Π H ( m ) ≤ m d {\displaystyle \Pi _{H}(m)\leq m^{d}} , where d {\displaystyle d} is the VC dimension of H {\displaystyle H} . == Proof of the Uniform Convergence Theorem == and are the sources of the proof below. Before we get into the details of the proof of the Uniform Convergence Theorem we will present a high level overview of the proof. Symmetrization: We transform the problem of analyzing | Q P ( h ) − Q ^ x ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{x}(h)|\geq \varepsilon } into the problem of analyzing | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} , where r {\displaystyle r} and s {\displaystyle s} are i.i.d samples of size m {\displaystyle m} drawn according to the distribution P {\displaystyle P} . One can view r {\displaystyle r} as the original randomly drawn sample of length m {\displaystyle m} , while s {\displaystyle s} may be thought as the testing sample which is used to estimate Q P ( h ) {\displaystyle Q_{P}(h)} . Permutation: Since r {\displaystyle r} and s {\displaystyle s} are picked identically and independently, so swapping elements between them will not change the probability distribution on r {\displaystyle r} and s {\displaystyle s} . So, we will try to bound the probability of | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} for some h ∈ H {\displaystyle h\in H} by considering the effect of a specific collection of permutations of the joint sample x = r | | s {\displaystyle x=r||s} . Specifically, we consider permutations σ ( x ) {\displaystyle \sigma (x)} which swap x i {\displaystyle x_{i}} and x m + i {\displaystyle x_{m+i}} in some subset of 1 , 2 , . . . , m {\displaystyle {1,2,...,m}} . The symbol r | | s {\displaystyle r||s} means the concatenation of r {\displaystyle r} and s {\displaystyle s} . Reduction to a finite class: We can now restrict the function class H {\displaystyle H} to a fixed joint sample and hence, if H {\displaystyle H} has finite VC Dimension, it reduces to the problem to one involving a finite function class. We present the technical details of the proof. It should be stressed that this proof glosses over details like the measurability of the events V {\displaystyle V} and R {\displaystyle R} ; measurability is granted in the case of H {\displaystyle H} being finite or countable, but this is not normally the case in standard applications of the theorem (e.g. for statistical learning theory or to prove the Glivenko-Cantelli theorem). To get measurability, one needs to use a notion of separability of the underlying space, possibly related to H {\displaystyle H} . === Symmetrization === Lemma: Let V = { x ∈ X m : | Q P ( h ) − Q ^ x ( h ) | ≥ ε for some h ∈ H } {\displaystyle V=\{x\in X^{m}:|Q_{P}(h)-{\widehat {Q}}_{x}(h)|\geq \varepsilon {\text{ for some }}h\in H\}} and R = { ( r , s ) ∈ X m × X m : | Q r ^ ( h ) − Q ^ s ( h ) | ≥ ε / 2 for some h ∈ H } . {\displaystyle R=\{(r,s)\in X^{m}\times X^{m}:|{\widehat {Q_{r}}}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2{\text{ for some }}h\in H\}.} Then for m ≥ 2 ε 2 {\displaystyle m\geq {\frac {2}{\varepsilon ^{2}}}} , P m ( V ) ≤ 2 P 2 m ( R ) {\displaystyle P^{m}(V)\leq 2P^{2m}(R)} . Proof: By the triangle inequality, if | Q P ( h ) − Q ^ r ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon } and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2} then | Q ^ r ( h ) − Q ^ s ( h ) | ≥ ε / 2 {\displaystyle |{\widehat {Q}}_{r}(h)-{\widehat {Q}}_{s}(h)|\geq \varepsilon /2} . Therefore, P 2 m ( R ) ≥ P 2 m { ∃ h ∈ H , | Q P ( h ) − Q ^ r ( h ) | ≥ ε and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 } = ∫ V P m { s : ∃ h ∈ H , | Q P ( h ) − Q ^ r ( h ) | ≥ ε and | Q P ( h ) − Q ^ s ( h ) | ≤ ε / 2 } d P m ( r ) = A {\displaystyle {\begin{aligned}&P^{2m}(R)\\[5pt]\geq {}&P^{2m}\{\exists h\in H,|Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon {\text{ and }}|Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2\}\\[5pt]={}&\int _{V}P^{m}\{s:\exists h\in H,|Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon {\text{ and }}|Q_{P}(h)-{\widehat {Q}}_{s}(h)|\leq \varepsilon /2\}\,dP^{m}(r)\\[5pt]={}&A\end{aligned}}} since r {\displaystyle r} and s {\displaystyle s} are independent. Now for r ∈ V {\displaystyle r\in V} fix an h ∈ H {\displaystyle h\in H} such that | Q P ( h ) − Q ^ r ( h ) | ≥ ε {\displaystyle |Q_{P}(h)-{\widehat {Q}}_{r}(h)|\geq \varepsilon } . For this h {\displaystyle h} , we shall

    Read more →
  • Aseprite

    Aseprite

    Aseprite ( ace-prite) is a proprietary, source-available image editor designed primarily for pixel art drawing and animation. It runs on Windows, macOS, and Linux, and features different tools for image and animation editing such as layers, frames, tilemap support, command-line interface, Lua scripting, among others. It is developed by Igara Studio S.A. and led by the developers David, Gaspar, and Martín Capello. Aseprite can be downloaded as freeware, (albeit it does not have the ability to save sprites) or purchased on Steam or Itch.io. Aseprite source code and binaries are distributed under EULA, educational, and Steam proprietary licenses. == History == Aseprite, formerly known as Allegro Sprite Editor, had its first release in 2001 as a free software project under the GPLv2 license. This license was kept until August 2016 with version v1.1.8, when the developers switched to a EULA, thus making the software proprietary. On the 1st of September 2016, the main developer, David Capello, wrote a post on the Aseprite Devblog explaining this change. The EULA permits others to download the Aseprite source code, compile it, and use it for personal purposes, but forbids its redistribution to third parties. After the license change, LibreSprite, a free and open source version of it, was created. Both before and after the license change, Aseprite was sold online, on Steam, itch.io, and the project's website. The project's code repository was hosted on Google Code until August 2014, when it was migrated to GitHub, where it remains hosted to date. As of October 2022, its repository has had 68 contributors and around 19 thousand stars. From 2014 to 2021, Aseprite had 66 different releases. Aseprite was used in the development of several notable games such as TowerFall (2013), Celeste (2018), Minit (2018), Wargroove (2019), Loop Hero (2021), Eastward (2021), Unpacking (2021), Haiku the Robot (2022) and Pizza Tower (2023). == Design and features == The main design purpose of Aseprite is to create animated 2D pixel-art sprites. Some of its features include: Layers and frames, with layer grouping and animation tagging Pixel-art specific transformations and tools (pixel-perfect modes, custom brushes, etc.) Animation real-time preview and onion skinning Tilemap and tileset modes Color palette managing, including 65 default palettes Color profiles and modes (RGBA, indexed and grayscale) Non-square pixels Command line interface (CLI) and Lua scripting Aseprite uses its own binary file type to store data, which is typically saved with .ase or .aseprite extensions. Different third-party projects were developed to support parsing of .ase files in programming languages including C#, Python and JavaScript, and in game engines such as Unity and Godot. Images and animations can be exported to different file formats including PNG, GIF, FLC, FLI, JPEG, PCX, TGA, ICO, SVG, and bitmap (BMP).

    Read more →
  • CapCut

    CapCut

    CapCut, known domestically as JianYing (Chinese: 剪映; pinyin: Jiǎnyìng) and formerly internationally as ViaMaker, is a video editor developed by ByteDance, available as a mobile app, desktop app, and web app. == History == The app was first released in China in 2019 and was initially available for iPhone and Android. In 2020, it was rebranded in English from ViaMaker to CapCut and became available globally. It later expanded to include web and desktop versions for Mac and Windows. In 2022, CapCut reached 200 million active users. According to The Wall Street Journal, in March 2023, it was the second-most downloaded app in the U.S., behind that of Chinese discount retailer Temu. In January 2025, CapCut had over 1 billion downloads on the Google Play Store. On February 1, 2021, CapCut Pro for Windows was launched. On November 27, the Pro version for Mac was launched. In July 2025, CapCut Pro for HarmonyOS was available on HarmonyOS NEXT tablets. In July 2024, CapCut was reported by the South China Morning Post to be a generative AI (GenAI) application that led global AI app downloads, with approximately 38.42 million downloads and 323 million monthly active users. == Features == CapCut supports basic video editing functions, including editing, trimming, and adding or splitting clips. Editing projects is limited to single-layer editing, but the app supports overlay options that enable additional effects, including multi-layer editing. The app includes a library of pre-made templates and a tool that generates editable video captions. It also provides photo editing tools, including retouch and product photo features integrated within the editing interface. CapCut's video editor includes AI-based features such as video and script generation. Users can export or save completed projects directly to different social media platforms. CapCut includes a free version and a paid Pro version with cloud storage and advanced features. == Controversies == === Illegal data collection === In July 2023, many users of CapCut accused it of illegally profiting off their personal data. A class-action lawsuit filed in the U.S. District Court for the Northern District of Illinois on July 28, 2023, alleged that CapCut illegally harvests and profits from user data including biometric information and geolocation without consent. In September 2025, a federal court excluded most of the lawsuit, which alleged that TikTok’s parent company improperly scraped private data from CapCut's video editing software, as lacking grounds, with some of the class action continuing to move forward. == Bans and restrictions == === Ban in India === As a response to border clashes with China in May 2020, the Indian government banned around 56 Chinese applications including CapCut and TikTok, which is owned by CapCut's parent company ByteDance. Indian users were unable to use and download the application. As of February 2022, around 273 Chinese applications have been banned by the Indian government under the concern of national security and Indian user privacy. === Ban in the United States === On January 18, 2025, at 10 PM EST, CapCut was banned in the United States along with TikTok and all other ByteDance apps due to the implementation of the Protecting Americans from Foreign Adversary Controlled Applications Act. Hours after the suspension of services took effect, President Donald Trump indicated on Truth Social that he would issue an executive order on the day of his inauguration "to extend the period of time before the law's prohibitions take effect". On January 21, CapCut began restoring service. On February 13, Google and Apple restored CapCut on the App Store and Google Play Store.

    Read more →
  • Adobe InDesign

    Adobe InDesign

    Adobe InDesign is a desktop publishing and page layout designing software application produced by Adobe and first released in 1999. It can be used to create works such as posters, flyers, brochures, magazines, newspapers, presentations, books and ebooks. InDesign can also publish content suitable for tablet devices in conjunction with Adobe Digital Publishing Suite. Graphic designers and production artists are the principal users. InDesign is the successor to PageMaker, which Adobe acquired by buying Aldus Corporation in late 1994. (Freehand, Aldus's competitor to Adobe Illustrator, was licensed from Altsys, the maker of Fontographer.) By 1998, PageMaker had lost much of the professional market to the comparatively feature-rich QuarkXPress version 3.3, released in 1992, and version 4.0, released in 1996. In 1999, Quark announced its offer to buy Adobe and to divest the combined company of PageMaker to avoid problems under United States antitrust law. Adobe declined Quark's offer and continued to develop a new desktop publishing application. Aldus had begun developing a successor to PageMaker, code-named "Shuksan". Later, Adobe code-named the project "K2", and Adobe released InDesign 1.0 in 1999. InDesign exports documents in Adobe's Portable Document Format (PDF) and supports multiple languages. It was the first DTP application to support Unicode character sets, advanced typography with OpenType fonts, advanced transparency features, layout styles, optical margin alignment, and cross-platform scripting with JavaScript. Later versions of the software introduced new file formats. To support the new features, especially typography, introduced with InDesign CS, the program and its document format are not backward-compatible. Instead, InDesign CS2 introduced the INX (.inx) format, an XML-based document representation, to allow backward compatibility with future versions. InDesign CS versions updated with the 3.1 April 2005 update can read InDesign CS2-saved files exported to the .inx format. The InDesign Interchange format does not support versions earlier than InDesign CS. With InDesign CS4, Adobe replaced INX with InDesign Markup Language (IDML), another XML-based document representation. InDesign was the first native Mac OS X publishing software. With the third major version, InDesign CS, Adobe increased InDesign's distribution by bundling it with Adobe Photoshop, Adobe Illustrator, and Adobe Acrobat in Adobe Creative Suite. Adobe developed InDesign CS3 (and Creative Suite 3) as universal binary software compatible with native Intel and PowerPC Macs in 2007, two years after the announced 2005 schedule, inconveniencing early adopters of Intel-based Macs. Adobe CEO Bruce Chizen said, "Adobe will be first with a complete line of universal applications." == File format == The MIME type is not official File Open formats: indd, indl, indt, indb, inx, idml, pmd, xqx New File formats: indd, indl, indb File Save As formats: indd, indt Save file format for InCopy: icma (Assignment file) icml (Content file, Exported file) icap (Package for InCopy) idap (Package for InDesign) File Export formats: pdf, idml, icml, eps, jpg, txt, XML, rtf == Versions == Newer versions can, as a rule, open files created by older versions, but the reverse is not true. Current versions can export the InDesign file as an IDML file (InDesign Markup Language), which can be opened by InDesign versions from CS4 upwards; older versions from CS4 down can export to an INX file (InDesign Interchange format). === Server version === In October 2005, Adobe released InDesign Server CS2, a modified version of InDesign (without a user interface) for Windows and Macintosh server platforms. It does not provide any editing client; rather, it is for use by developers in creating client-server solutions with the InDesign plug-in technology. In March 2007 Adobe officially announced Adobe InDesign CS3 Server as part of the Adobe InDesign family. == Features == Paragraph styles are an essential tool for designers when working with text in Adobe InDesign. Despite their menacing appearance, they are straightforward to operate. Other features that make InDesign a good tool for working with text and paragraphs include: Creating frames and shapes Aligning objects with grids and guides Manipulating objects Organizing objects Importing text Formatting text Spell checking Importing images Parent pages (formerly master pages) Paragraph styles == Internationalization and localization == InDesign Middle Eastern editions have unique settings for laying out Arabic or Hebrew text. They feature: Text settings: Special settings for laying out Arabic or Hebrew text, such as: Ability to use Arabic, Persian or Hindi digits; Use kashidas for letter spacing and full justification; Ligature option; Adjust the position of diacritics, such as vowels of the Arabic script; Justify text in three possible ways: Standard, Arabic, Naskh; Option to insert special characters, including Geresh, Gershayim, Maqaf for Hebrew and Kashida for Arabic texts; Apply standard, Arabic, or Hebrew styles for page, paragraph, and footnote numbering. Bi-directional text flow: Right-to-left behavior applies to several objects: Story, paragraph, character, and table. It allows mixing right-to-left and left-to-right words, paragraphs, and stories in a document. Changing the direction of neutral characters (e.g., / or ?) is possible according to the user's keyboard language. Table of contents: Provides a table of contents titles, one for each supported language. This table is sorted according to the chosen language. InDesign CS4 Middle Eastern versions allow users to select the language of the index title and cross-references. Indices: This allows the creation of a simple keyword index or a somewhat more detailed index of the information in the text using embedded indexing codes. Unlike more sophisticated programs, InDesign cannot insert character style information as part of an index entry (e.g., when indexing book, journal, or movie titles). Indices are limited to four levels (the top level and three sub-levels). Like tables of contents, indices can be sorted according to the selected language. Importing and exporting: Can import QuarkXPress files up to version 4.1 (1999), even using Arabic XT, Arabic Phonyx, or Hebrew XPressWay fonts, retaining the layout and content. Includes 50 import/export filters, including a Microsoft Word 97-98-2000 import filter and a plain text import filter. Exports IDML files can be read by QuarkXPress 2017. Reverse layout: Include a reverse layout feature to reverse the layout of a document when converting a left-to-right document to a right-to-left one or vice versa. Complex script rendering: InDesign supports Unicode character encoding, and Middle Eastern editions support complex text layouts for Arabic and Hebrew complex scripts. The underlying Arabic and Hebrew support is present in the Western editions of InDesign CS4, CS5, CS5.5, and CS6, but the user interface is not exposed, making it difficult to access.

    Read more →
  • Similarity learning

    Similarity learning

    Similarity learning is an area of supervised machine learning in artificial intelligence. It is closely related to regression and classification, but the goal is to learn a similarity function that measures how similar or related two objects are. It has applications in ranking, in recommendation systems, visual identity tracking, face verification, and speaker verification. == Learning setup == There are four common setups for similarity and metric distance learning. Regression similarity learning In this setup, pairs of objects are given ( x i 1 , x i 2 ) {\displaystyle (x_{i}^{1},x_{i}^{2})} together with a measure of their similarity y i ∈ R {\displaystyle y_{i}\in R} . The goal is to learn a function that approximates f ( x i 1 , x i 2 ) ∼ y i {\displaystyle f(x_{i}^{1},x_{i}^{2})\sim y_{i}} for every new labeled triplet example ( x i 1 , x i 2 , y i ) {\displaystyle (x_{i}^{1},x_{i}^{2},y_{i})} . This is typically achieved by minimizing a regularized loss min W ∑ i l o s s ( w ; x i 1 , x i 2 , y i ) + r e g ( w ) {\displaystyle \min _{W}\sum _{i}loss(w;x_{i}^{1},x_{i}^{2},y_{i})+reg(w)} . Classification similarity learning Given are pairs of similar objects ( x i , x i + ) {\displaystyle (x_{i},x_{i}^{+})} and non similar objects ( x i , x i − ) {\displaystyle (x_{i},x_{i}^{-})} . An equivalent formulation is that every pair ( x i 1 , x i 2 ) {\displaystyle (x_{i}^{1},x_{i}^{2})} is given together with a binary label y i ∈ { 0 , 1 } {\displaystyle y_{i}\in \{0,1\}} that determines if the two objects are similar or not. The goal is again to learn a classifier that can decide if a new pair of objects is similar or not. Ranking similarity learning Given are triplets of objects ( x i , x i + , x i − ) {\displaystyle (x_{i},x_{i}^{+},x_{i}^{-})} whose relative similarity obey a predefined order: x i {\displaystyle x_{i}} is known to be more similar to x i + {\displaystyle x_{i}^{+}} than to x i − {\displaystyle x_{i}^{-}} . The goal is to learn a function f {\displaystyle f} such that for any new triplet of objects ( x , x + , x − ) {\displaystyle (x,x^{+},x^{-})} , it obeys f ( x , x + ) > f ( x , x − ) {\displaystyle f(x,x^{+})>f(x,x^{-})} (contrastive learning). This setup assumes a weaker form of supervision than in regression, because instead of providing an exact measure of similarity, one only has to provide the relative order of similarity. For this reason, ranking-based similarity learning is easier to apply in real large-scale applications. Locality sensitive hashing (LSH) Hashes input items so that similar items map to the same "buckets" in memory with high probability (the number of buckets being much smaller than the universe of possible input items). It is often applied in nearest neighbor search on large-scale high-dimensional data, e.g., image databases, document collections, time-series databases, and genome databases. A common approach for learning similarity is to model the similarity function as a bilinear form. For example, in the case of ranking similarity learning, one aims to learn a matrix W that parametrizes the similarity function f W ( x , z ) = x T W z {\displaystyle f_{W}(x,z)=x^{T}Wz} . When data is abundant, a common approach is to learn a siamese network – a deep network model with parameter sharing. == Metric learning == Similarity learning is closely related to distance metric learning. Metric learning is the task of learning a distance function over objects. A metric or distance function has to obey four axioms: non-negativity, identity of indiscernibles, symmetry and subadditivity (or the triangle inequality). In practice, metric learning algorithms ignore the condition of identity of indiscernibles and learn a pseudo-metric. When the objects x i {\displaystyle x_{i}} are vectors in R d {\displaystyle R^{d}} , then any matrix W {\displaystyle W} in the symmetric positive semi-definite cone S + d {\displaystyle S_{+}^{d}} defines a distance pseudo-metric of the space of x through the form D W ( x 1 , x 2 ) 2 = ( x 1 − x 2 ) ⊤ W ( x 1 − x 2 ) {\displaystyle D_{W}(x_{1},x_{2})^{2}=(x_{1}-x_{2})^{\top }W(x_{1}-x_{2})} . When W {\displaystyle W} is a symmetric positive definite matrix, D W {\displaystyle D_{W}} is a metric. Moreover, as any symmetric positive semi-definite matrix W ∈ S + d {\displaystyle W\in S_{+}^{d}} can be decomposed as W = L ⊤ L {\displaystyle W=L^{\top }L} where L ∈ R e × d {\displaystyle L\in R^{e\times d}} and e ≥ r a n k ( W ) {\displaystyle e\geq rank(W)} , the distance function D W {\displaystyle D_{W}} can be rewritten equivalently D W ( x 1 , x 2 ) 2 = ( x 1 − x 2 ) ⊤ L ⊤ L ( x 1 − x 2 ) = ‖ L ( x 1 − x 2 ) ‖ 2 2 {\displaystyle D_{W}(x_{1},x_{2})^{2}=(x_{1}-x_{2})^{\top }L^{\top }L(x_{1}-x_{2})=\|L(x_{1}-x_{2})\|_{2}^{2}} . The distance D W ( x 1 , x 2 ) 2 = ‖ x 1 ′ − x 2 ′ ‖ 2 2 {\displaystyle D_{W}(x_{1},x_{2})^{2}=\|x_{1}'-x_{2}'\|_{2}^{2}} corresponds to the Euclidean distance between the transformed feature vectors x 1 ′ = L x 1 {\displaystyle x_{1}'=Lx_{1}} and x 2 ′ = L x 2 {\displaystyle x_{2}'=Lx_{2}} . Many formulations for metric learning have been proposed. Some well-known approaches for metric learning include learning from relative comparisons, which is based on the triplet loss, large margin nearest neighbor, and information theoretic metric learning (ITML). In statistics, the covariance matrix of the data is sometimes used to define a distance metric called Mahalanobis distance. == Applications == Similarity learning is used in information retrieval for learning to rank, in face verification or face identification, and in recommendation systems. Also, many machine learning approaches rely on some metric. This includes unsupervised learning such as clustering, which groups together close or similar objects. It also includes supervised approaches like K-nearest neighbor algorithm which rely on labels of nearby objects to decide on the label of a new object. Metric learning has been proposed as a preprocessing step for many of these approaches. == Scalability == Metric and similarity learning scale quadratically with the dimension of the input space, as can easily see when the learned metric has a bilinear form f W ( x , z ) = x T W z {\displaystyle f_{W}(x,z)=x^{T}Wz} . Scaling to higher dimensions can be achieved by enforcing a sparseness structure over the matrix model, as done with HDSL, and with COMET. == Software == metric-learn is a free software Python library which offers efficient implementations of several supervised and weakly-supervised similarity and metric learning algorithms. The API of metric-learn is compatible with scikit-learn. OpenMetricLearning is a Python framework to train and validate the models producing high-quality embeddings. == Further information == For further information on this topic, see the surveys on metric and similarity learning by Bellet et al. and Kulis.

    Read more →
  • Photoanalysis

    Photoanalysis

    Photoanalysis (or photo analysis) refers to the study of pictures to compile various types of data, for example, to measure the size distribution of virtually anything that can be captured by photo. Photoanalysis technology has changed the way mines and mills quantify fragmented material. Images are an effective way to document conditions before, after, and even during blasting activities. The technology is advancing at a high rate, and lenses, storage media memory, light sensitivity and resolution have been improving steadily. Today's digital cameras and camcorders include high-resolution optics, compact size, automatic time and date stamps, good battery life, shutters to freeze motion, and computers to autofocus and eliminate jitter using image stabilization. == Mining == Photoanalysis in mining operations can provide an automated system that forewarns a company of potential problems with materials, leading to economies and reduced damage caused from over-sized materials. It can also help determine the effectiveness of blasts. A company can use this technology to monitor materials moving on a conveyor belt in an underground environment, to measure piles left over from a blast, and even measure the amount of material being carried by dump trucks or vessels to a destination. Photoanalysis is being used on SAG mills worldwide to control the size of rock being crushed. Companies are using this technology to determine the size of particles being processed in the SAG Mill.[1] Archived 2009-05-23 at the Wayback Machine Having oversize material entering the SAG mill makes an operation less efficient, costing companies money in electrical and maintenance costs. Photoanalysis technology can eliminate unwanted material before it enters the mill, keeping rock crushing costs low. == Forestry == Wood chip size can affect the overall quality of a product. With automated photoanalysis systems, companies can remove any unwanted wrong-size particles without stopping their mill process. Photoanalysis can affect how efficiently forestry companies operate. In mills worldwide, photoanalysis technology is improving the use of lumber products, cutting back on the amount of trees being used to operate, and saving companies money through quality control optimization.[2] With the current downturn in the North American forestry industry, operators are looking at making their mills more efficient and effective when processing materials. Photoanalysis technology helps identify any weaknesses in the process by continuously monitoring different sections of an operation. == Agriculture == Agricultural companies can, using photoanalysis, monitor conveyor belts of food without contaminating the product by touching it. Other benefits of photoanalysis systems include: Automated removal of any unwanted material on food conveyor Improved quality control for the most important parts of the agricultural process Pinpoint accuracy that helps the efficiency and effectiveness of product handling techniques The importance of photoanalysis technology is being noticed by the agricultural industry as it identifies any unwanted materials going through the process. In an example, if a mouse is on a conveyor of corn, photoanalysis technology would be able to identify the unwanted object and remove it before it contaminates the whole process. == Origins of photoanalysis technology == Photoanalysis technology was created by using the Waterloo Image Enhancement Process in the 1980s. After further development of the imaging process with explosives producer DuPont, engineers Tom Palangio and Takis Katsabanis began selling photoanalysis software commercially. They later renamed the process WipFrag, standing for Waterloo Image Process Fragmentation Today, photoanalysis technology has evolved into stabilized and portable systems that can automatically capture and analyze results instantly. Thousands of these products are currently being used around the world to measure fragmented material. == Photoanalysis equipment photos == == Fragmentation analysis == Fragmentation analysis is becoming a popular term in mining, agricultural and forestry industries. With the majority of money in these industries directed towards the proper sizing of materials, companies are using fragmentation analysis to determine various factors within an operation.[3] The two main ways a company keeps track of fragmented material are through manual and automated sieving procedures. Manual sieving involves extracting a sample of material to analyze the size distribution. The results can be tabulated within two days. Automated sieving is an advanced way of sieving materials running through a process. Without having to extract the material, photoanalysis can take place, allowing for immediate results with pinpoint accuracy. == Blast Fragmentation Software == Operators are using fragmentation analysis to determine the effectiveness of various blasts. With automated sieving technology, workers can track the success of these blasts and receive instant results. Companies are using these results to determine what blasting method yielded the best results for their specific operation. The common variables associated with blast optimization are the provided Particle Size Distribution (PSD) from a shovel fragmentation system, geology including rock type and fracturing, and energy factor. By using photoanalysis the fragmented materials can be monitored, offering pinpoint accuracy and allowing mine operators to make adjustments to future blasting procedures. See Optical Granulometry to view the automated sieving process. == Pre-crushing analysis == Maintenance costs can be significantly reduced if an operation focuses on the fragmentation of the particles passing through their process. Automated sieving systems can detect and help remove any oversize material before it enters the crusher and causes maintenance problems. It also helps determine the effectiveness of the mining process prior to crushing; the sizing of material is always a critical part of operations in the mining, forestry and agricultural industries. Having an analysis taking place at every major point in an operation allows for the proper tracking of material being processed. Engineers can then determine what part of the process needs improving based solely on the size of material. == Post-crushing analysis == Measuring how effective industrial crushers are, can help save a company millions of dollars in energy costs on an annual basis. There are two components that affect a typical crusher: the size of the material inputted, and the speed at which the crusher is moving. If the user can find a perfect balance between these two components, the materials will be crushed to the right size in the shortest time possible. Meeting the material standards set by governments and large companies can be hard. Having a post-crushing analysis taking place ensures that no oversize material gets shipped; eliminating the chance of getting fined for not meeting industry specifications.

    Read more →
  • Teleradiology

    Teleradiology

    Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.

    Read more →
  • Voice activity detection

    Voice activity detection

    Voice activity detection (VAD), also known as speech activity detection or speech detection, is the detection of the presence or absence of human speech, used in speech processing. The main uses of VAD are in speaker diarization, speech coding and speech recognition. It can facilitate speech processing, and can also be used to deactivate some processes during non-speech section of an audio session: it can avoid unnecessary coding/transmission of silence packets in Voice over Internet Protocol (VoIP) applications, saving on computation and on network bandwidth. VAD is an important enabling technology for a variety of speech-based applications. Therefore, various VAD algorithms have been developed that provide varying features and compromises between latency, sensitivity, accuracy and computational cost. Some VAD algorithms also provide further analysis, for example whether the speech is voiced, unvoiced or sustained. Voice activity detection is usually independent of language. It was first investigated for use on time-assignment speech interpolation (TASI) systems. == Algorithm overview == The typical design of a VAD algorithm is as follows: There may first be a noise reduction stage, e.g. via spectral subtraction. Then some features or quantities are calculated from a section of the input signal. A classification rule is applied to classify the section as speech or non-speech – often this classification rule finds when a value exceeds a certain threshold. There may be some feedback in this sequence, in which the VAD decision is used to improve the noise estimate in the noise reduction stage, or to adaptively vary the threshold(s). These feedback operations improve the VAD performance in non-stationary noise (i.e. when the noise varies a lot). A representative set of recently published VAD methods formulates the decision rule on a frame by frame basis using instantaneous measures of the divergence distance between speech and noise. The different measures which are used in VAD methods include spectral slope, correlation coefficients, log likelihood ratio, cepstral, weighted cepstral, and modified distance measures. Independently from the choice of VAD algorithm, a compromise must be made between having voice detected as noise, or noise detected as voice (between false positive and false negative). A VAD operating in a mobile phone must be able to detect speech in the presence of a range of very diverse types of acoustic background noise. In these difficult detection conditions it is often preferable that a VAD should fail-safe, indicating speech detected when the decision is in doubt, to lower the chance of losing speech segments. The biggest difficulty in the detection of speech in this environment is the very low signal-to-noise ratios (SNRs) that are encountered. It may be impossible to distinguish between speech and noise using simple level detection techniques when parts of the speech utterance are buried below the noise. == Applications == VAD is an integral part of different speech communication systems such as audio conferencing, echo cancellation, speech recognition, speech encoding, speaker recognition and hands-free telephony. In the field of multimedia applications, VAD allows simultaneous voice and data applications. Similarly, in Universal Mobile Telecommunications Systems (UMTS), it controls and reduces the average bit rate and enhances overall coding quality of speech. In cellular radio systems (for instance GSM and CDMA systems) based on Discontinuous Transmission (DTX) mode, VAD is essential for enhancing system capacity by reducing co-channel interference and power consumption in portable digital devices. In speech processing applications, voice activity detection plays an important role since non-speech frames are often discarded. For a wide range of applications such as digital mobile radio, Digital Simultaneous Voice and Data (DSVD) or speech storage, it is desirable to provide a discontinuous transmission of speech-coding parameters. Advantages can include lower average power consumption in mobile handsets, higher average bit rate for simultaneous services like data transmission, or a higher capacity on storage chips. However, the improvement depends mainly on the percentage of pauses during speech and the reliability of the VAD used to detect these intervals. On the one hand, it is advantageous to have a low percentage of speech activity. On the other hand, clipping, that is the loss of milliseconds of active speech, should be minimized to preserve quality. This is the crucial problem for a VAD algorithm under heavy noise conditions. === Use in telemarketing === One controversial application of VAD is in conjunction with predictive dialers used by telemarketing firms. In order to maximize agent productivity, telemarketing firms set up predictive dialers to call more numbers than they have agents available, knowing most calls will end up in either "Ring – No Answer" or answering machines. When a person answers, they typically speak briefly ("Hello", "Good evening", etc.) and then there is a brief period of silence. Answering machine messages are usually 3–15 seconds of continuous speech. By setting VAD parameters correctly, dialers can determine whether a person or a machine answered the call and, if it's a person, transfer the call to an available agent. If it detects an answering machine message, the dialer hangs up. Often, even when the system correctly detects a person answering the call, no agent may be available, resulting in a "silent call". Call screening with a multi-second message like "please say who you are, and I may pick up the phone" will frustrate such automated calls. == Performance evaluation == To evaluate a VAD, its output using test recordings is compared with those of an "ideal" VAD – created by hand-annotating the presence or absence of voice in the recordings. The performance of a VAD is commonly evaluated on the basis of the following four parameters: FEC (Front End Clipping): clipping introduced in passing from noise to speech activity; MSC (Mid Speech Clipping): clipping due to speech misclassified as noise; OVER: noise interpreted as speech due to the VAD flag remaining active in passing from speech activity to noise; NDS (Noise Detected as Speech): noise interpreted as speech within a silence period. Although the method described above provides useful objective information concerning the performance of a VAD, it is only an approximate measure of the subjective effect. For example, the effects of speech signal clipping can at times be hidden by the presence of background noise, depending on the model chosen for the comfort noise synthesis, so some of the clipping measured with objective tests is in reality not audible. It is therefore important to carry out subjective tests on VADs, the main aim of which is to ensure that the clipping perceived is acceptable. In VoIP applications, front-end clipping can be reduced by rewinding to shortly before the detection and sending very slightly delayed data. This kind of test requires a certain number of listeners to judge recordings containing the processing results of the VADs being tested, giving marks to several speech sequences on the following features: Quality; Comprehension difficulty; Audibility of clipping. These marks are then used to calculate average results for each of the features listed above, thus providing a global estimate of the behavior of the VAD being tested. To conclude, whereas objective methods are very useful in an initial stage to evaluate the quality of a VAD, subjective methods are more significant. As they require the participation of several people for a few days, increasing cost, they are generally only used when a proposal is about to be standardized. == Implementations == One early standard VAD is that developed by British Telecom for use in the Pan-European digital cellular mobile telephone service in 1991. It uses inverse filtering trained on non-speech segments to filter out background noise, so that it can then more reliably use a simple power-threshold to decide if a voice is present. The G.729 standard calculates the following features for its VAD: line spectral frequencies, full-band energy, low-band energy (<1 kHz), and zero-crossing rate. It applies a simple classification using a fixed decision boundary in the space defined by these features, and then applies smoothing and adaptive correction to improve the estimate. The GSM standard includes two VAD options developed by ETSI. Option 1 computes the SNR in nine bands and applies a threshold to these values. Option 2 calculates different parameters: channel power, voice metrics, and noise power. It then thresholds the voice metrics using a threshold that varies according to the estimated SNR. The Speex audio compression library uses a procedure named Improved Minima Controlled Recursive Averaging, which uses a smoothed representation of spectral pow

    Read more →
  • Contract management software

    Contract management software

    Contract management software constitutes software and associated data management used to support contract management, contract lifecycle management, and contractor management on projects in the procurement of goods and services. It may be used together with project management software. == History == Historically, contract management was seen as a "paper-intensive" process. Early steps from the early 2000's reported by the Aberdeen Group required extensive data conversion work to enable documents to be handled electronically. With the adoption of the European Union's General Data Protection Regulation (GDPR) in 2016, companies needed to take additional steps in regards to contract management. Each data responsible entity was obliged to sign data processing agreements (DPAs) with the various vendors, who treat personal data on behalf of the data responsible. DPAs need to be regularly controlled, adjusted and renewed, which adds an extra agreement to such vendors or at least an extra DPA addendum to each agreement. By 2018, Ardent Partner's research had found that software used for automating contract management activities was being more extensively used among major companies or businesses with "Best-in-Class" procurement teams. Contract management process automation was found to be closely linked with more effective internal business collaboration, standardization and risk management. == Advantages and key functions == Using contract management software can have multiple benefits compared to manually managing paper contracts. This software can help keep track of multiple activities and can have features for automating administration, ensuring compliance, monitoring risk, running reports and triggering alerts. In addition to these types of features, contract management software systems provide a centralized repository for employees to quickly access all contracts worldwide in one place. Contract management software is produced by many companies, working on a range of scales and offering varying degrees of customizability. Basic functions should include the ability to store contract documents, track changes to contract documents, search documents for a particular criterion, send key date alerts and to report required aspects of the contract. Other functions include managing a new contract request, capturing related data, following a document through a review and approval process, and collecting digital signatures. Contract management software may also be an aid to project portfolio management and spend analysis, and may also monitor KPIs. Leading contract management software provides contract visibility, monitoring, and compliance to automate and streamline the contract lifecycle process. Contract management software which uses artificial intelligence (AI) can identify contract types based on pattern recognition. AI contracting software trains its algorithms on a set of contract data to recognize patterns and extract variables such as clauses, dates, and parties. It also offers simple prediction capabilities, by sorting through a large volume of contracts and flagging individual contracts based on specified criteria. AI software can also read contracts in multiple formats and languages, extract contract data, and provide analytics. It can reduce the risk of human error in contract drafting and review. A centralized repository provides a critical advantage allowing for all contract documents to be stored within one location. Having contracts stored in multiple locations can delay and interrupt the contracting process. == Contract risk management software (CRMS) for capital projects == Very large enterprises, such as capital expenditure (capex) projects, involve multiple parties and high risk and uncertainty. They are unlike traditional operating contracts in that they are subject to shared deadlines in unique situations. As the complexity of these unique projects increases, the relationships between parties become more important. This requires contract management software, or contract risk management software (CRMS), to become more dynamic and responsive. The terms of these capex contracts necessarily involve assumptions at the start of the process and are likely to change over the lifetime of the project lifecycle. For this reason, CRMS must be capable of recording one single instance of agreed changes to contract terms and incorporating these changes in an auditable and legally robust way. With multiple decision makers involved, CRMS should also make accountability more transparent and enable faster decisions about variation proposals.

    Read more →
  • Deep Zoom

    Deep Zoom

    Deep Zoom is a technology developed by Microsoft for efficiently transmitting and viewing images. It allows users to pan around and zoom in on a large, high resolution image or a large collection of images. It reduces the time required for initial load by downloading only the region being viewed or only at the resolution it is displayed at. Subsequent regions are downloaded as the user pans to (or zooms into) them; animations are used to hide any jerkiness in the transition. The libraries are also available in other platforms including Java and Flash. == History == The Deep Zoom file format is very similar to the Google Maps image format where images are broken into tiles and then displayed as required. The tiling typically follows a quadtree pattern of increasing resolution of image (in other words twice the zoom and twice the resolution). The main difference is that with Google Maps the actual details on the image change from one zoom level to another, while with Deep Zoom the same image is displayed at each zoom level. Seadragon Software, formerly Sand Codex, first created the Seadragon technology and its implementation of what is now called Deep Zoom. This technology was then absorbed into the Microsoft Live Labs when Seadragon Software was acquired. Engineers from Seadragon now work with Microsoft to integrate their work into technology such as Silverlight and Photosynth. == Deep Zoom examples == The most famous implementation of Deep Zoom was probably the first: the memorabilia collection at the Hard Rock website. Conceived and designed by Duncan/Channon and built by Vertigo, it was demonstrated for the first time in March 2008 at the Microsoft MIX convention in Las Vegas. In 2010, Microsoft Live Labs partnered with the University of California, Berkeley to create ChronoZoom, a DeepZoom-powered time visualization tool that pushed the limits of DeepZoom, since it required zooming from the scale of 13 billion years down to a single day. The project has since graduated to development under Microsoft Research. Another example is the Deep Earth project. It is described by its creators as "a community project focused on creating a rich interactive mapping control using Silverlight2 Deep Zoom. Concentrating on Microsoft Virtual Earth imagery and data the project offers team members the opportunity to learn and share while creating something cool and useful." A paintings collection project http://galleryzoom.co.uk/ shows 1000 high resolution/sensor images individually indexed. (Using Deep Zoom Composer). Blaise Aguera y Arcas gave a demonstration of Seadragon and Photosynth at the 2007 TED conference. In November 2009, 352 Media Group, a Silverlight developer in the Microsoft Silverlight Partner Program, created an example of Deep Zoom using Microsoft Silverlight version 3. It is online at 352 Media Group's Web site. The Winston Churchill Deep Zoom Archived 2010-07-04 at the Wayback Machine mosaic, created by Silverlight developers Shoothill, features as both an online interactive deep zoom and a standalone deep zoom which forms part of the Churchill exhibit in the Churchill War Rooms in Whitehall. In 2010, Shoothill built the Sumatran Tiger Deep Zoom - the largest seen to date - for worldwide conservation charity Fauna and Flora International, featuring thousands of images of endangered species. An early example of Deep Zoom-like technology was implemented at The Department of Maori Affairs in New Zealand in 1997. The technology was used to display Maori land ownership. == Deep Zoom images == The file format used by Deep Zoom (as well as Photosynth and Seadragon Ajax) is XML based. Users can specify a single large image (dzi) or a collection of images (dzc). It also allows for "Sparse Images"; where some parts of the image have greater resolution than others, an example of which can be found on the Seadragon Ajax home page; The bike image displayed is a sparse image. Though used in the proprietary Deep Zoom, the dzi format is open and able to be used by anyone. === Deep Zoom image (dzi) === A DZI has two parts: a DZI file (with either a .dzi or .xml extension) and a subdirectory of image folders. Each folder in the image subdirectory is labeled with its level of resolution. Higher numbers correspond to a higher resolution level; inside each folder are the image tiles corresponding to that level of resolution, numbered consecutively in columns from top left to bottom right. === Deep Zoom collection (dzc) === A DZC is a collection of some number of DZIs linked and referenced by a DZC file (with either a .dzc or .xml extension). At a high level, a collection is a number of image thumbnails whose location is kept track of by the .dzc/.xml file, when zooming into an image, it accesses greater resolutions tiles. A DZC's structure is similar to that of a DZI; the .dzc/.xml file defines the collection and the subdirectory of folders maps to the DZI file structure, each with their set of .dzi/.xml and image tiles. The DZC is used in Microsoft's Pivot, but not in SeaDragon per se. === Sparse Images === Sparse images are a sub-classification of the DZI file type. A sparse image is normally a number of separate photographs with varying resolution levels that have been placed in a single DZI instead of a DZC. Sparse images have no different file structure than that of a DZI and differ only in that there is not a single "highest resolution" level for the entire DZI. == Software that uses Deep Zoom == Image Composite Editor - image stitching tool created by Microsoft Research Deep Zoom Composer - collage maker and simple panorama tool created by Microsoft. Images' resolution is maintained when exporting for web use (via Silverlight Deep Zoom or JavaScript using a third-party template). No longer available for download from Microsoft though it can be found on various other sources such as Internet Archive. == iPhone OS development == Microsoft Live Labs has created an application for the App Store called Seadragon Mobile. It is run over the internet and includes Deep Zoom on the following categories; art, history, maps, photos, Photosynth which anybody can upload to, space and technology & web.

    Read more →
  • Creately

    Creately

    Creately is a SaaS visual collaboration tool with diagramming and design capabilities designed by Cinergix. The application is mostly known for creating flowcharts, organization charts, project charts, UML diagrams, mind maps, and other business visuals. == History == The initial beta version of Creately was released by Chandika Jayasundara. Hiraash Thawfeek, Nick Foster and Charanjit Singh joined the project in the same year. Chandika Jayasundara is CEO of Cinergix. The headquarters of the company is located at Mentone, Victoria, Australia. == Features and reception == Creately provides predefined templates and diagram elements for incorporating in the projects. It provides drag and drop feature with which both predefined and custom made shapes can be included to build the desired diagram while the same workspace can be shared with multiple persons for collaboration. Some experts have reviewed the application by commenting on its lacking in accessible integration options as its downside. The company claims Creately to have integration feature with Slack, Confluence while not having the integration with Zapier and OneDrive yet. It is compatible with Google Drive and Dropbox. The software is available as both freemium and paid option.

    Read more →
  • Augment (app)

    Augment (app)

    Augment is an augmented reality SaaS platform that allows users to visualize their products in 3D in real environment and in real-time through tablets or smartphones. The software can be used for retail, e-commerce, architecture, and other purposes. Augment created a mobile app of the same name, used to visualize 3D models in augmented reality and a web application called Augment Manager for 3D content management. The company is based in Paris, France, and was founded in October 2011 by Jean-François Chianetta, Cyril Champier, and Mickaël Jordan. In March 2016, Augment announced €3 million in its series-A round from Salesforce Ventures, which bringing the total funding since launch to $4.7 million. Augment lets businesses and 3D professionals visualize projects in their actual size and environment, on iPhone, iPad, and Android, using the power of augmented reality. Users can print the Augment tracker or create their own tracker to place the 3D models in space and at scale in real time. Common uses of the technology include product presentations, interactive print campaigns and e-Commerce product visualization. Augment has just released its augmented reality SDK solutions for retail and augmented commerce. The SDK solutions, available for both native mobile app and web integrations, allow companies to embed augmented reality product visualization in their existing eCommerce platforms. == Technology == Augment uses the following 3D technologies: Vuforia Augmented Reality SDK OpenGL == Customer cases == Companies such as Coca-Cola, Siemens, Nokia, Nestle, and Boeing are using Augment's solutions. == History == Augment was first created by Jean-François Chianetta in October 2011. Chianetta later teamed up with Cyril Champier and Mickaël Jordan for further development. The co-founding team was among the 12 startups of Season 3 of French accelerator Le Camping. The team raised one million euros (US$1,300,000) in April 2013 and moved its office to Paris. In March 2016, Augment raised US$3M Series A funding from Salesforce and other investors. In 2013, Augment's first service, Boost Business Catalog, was made available to help businesses catalogue and display their product models. Customers can rotate the images in 3D and view augmented content before deciding what to buy. == Awards == "Best Innovation" at Ecommerce Mag Trophy 2013

    Read more →
  • Quantexa

    Quantexa

    Quantexa is a UK-based software company that develops artificial intelligence-based applications for data analytics and decision-making. The company was founded in 2016 and is headquartered in London, with operations in North America, Europe, and the Asia-Pacific region. As of 2025, Quantexa reported a valuation of $2.6 billion and provides services to organizations in over 70 countries. Investors include Warburg Pincus, HSBC, and the Ontario Teachers’ Pension Plan. == History == Quantexa was founded in London in 2016 by several co-founders, including Jamie Hutton, Richard Seewald, Imam Hoque, Felix Hoddinott, and Vishal Marria, who also serves as the company's chief executive officer. The company was established to develop tools intended to address limitations in traditional data analysis methods, particularly those related to identifying hidden connections across large datasets. The name "Quantexa" is derived from the company's focus on quantitative methods and data analysis. In 2023, Quantexa acquired Dublin-based AI firm Aylien. In April 2023, the company completed a Series E funding round, raising $129 million at a valuation of approximately $1.8 billion, marking its entry into "unicorn" status. In October 2024, the company reported annual recurring revenue (ARR) exceeding $100 million. In early 2025, Quantexa participated in the World Economic Forum's Unicorn Program, which supports high-growth technology companies. In March 2025, Quantexa completed a Series F funding round of $175 million, led by Teachers' Venture Growth, the venture arm of the Ontario Teachers' Pension Plan. That August, the company was reported to be considering a 2026 IPO. The company formed a partnership with Zurich in October 2025, the first insurer to add its AI-based Decision Intelligence platform to enhance fraud detection.

    Read more →
  • List of robotics journals

    List of robotics journals

    List of robotics journals includes notable academic and scientific journals that focus on research in the field of robotics and automation. == Journals == Acta Mechanica et Automatica Advanced Robotics Annual Review of Control, Robotics, and Autonomous Systems IEEE Robotics and Automation Letters IEEE Transactions on Robotics IEEE Transactions on Field Robotics The International Journal of Advanced Manufacturing Technology International Journal of Humanoid Robotics International Journal of Robotics Research Journal of Cognitive Engineering and Decision Making Journal of Field Robotics Journal of Intelligent & Robotic Systems Paladyn Robotics and Autonomous Systems Robotics Science Robotics SLAS Technology

    Read more →
  • Computer-aided lean management

    Computer-aided lean management

    Computer-aided lean management, in business management, is a methodology of developing and using software-controlled, lean systems integration. Its goal is to drive innovation towards cost and cycle-time savings. It attempts to create an efficient use of capital and resources through the development and use of one integrated system model to run a business's planning, engineering, design, maintenance, and operations. == Overview == Computer-Aided Lean Management (CALM) is a management philosophy that uses software to reduce risk and inefficiencies. CALM acts on uncertainties and business inefficiencies to increase profitability through the use of computational decision-making tools that enable opportunities for additional value creation. It is based on the application of software to enable continuous improvement through an Integrated System Model (ISM) of the business’s physical assets, business processes, and machine learning. This integration of software applications using lean principles was developed in the aerospace industry and has migrated to the energy industry. The creation of an ISM removes the barriers posed by the silos or stovepipes inherent in the departmentalization of most companies. Integration enables lean uses of information for the creation of actionable knowledge. CALM strives to create such a lean management approach to running the company through the rigors of software enforcement. From this software enforcement comes clear policy and procedures that are adhered to, activity-based costing, measurement of effectiveness, and the capability of using advanced algorithms for dramatic improvements in optimization of resources. CALM creates business capabilities through software to enable technology application, streamlining of processes, and a lean organizational structure. The methodology is based on a common sense approach for running a business, by measuring actions taken and using those measurements to design more efficient processes. == History == CALM was inspired by lean processes and techniques that were already dominant management technologies with a wide diversity of applications and successes. Motorola and General Electric had been known for the concepts of Six Sigma; Boeing had been managing mass (using modular and flexible assembly options), and Toyota combined elements of these methodologies to create the Toyota Production System. Boeing then took the Toyota model and added computer-aided enforcement of lean methodologies throughout the manufacturing process. One of the major sources for CALM's outgrowth was integrated definition (IDEF) modeling in aerospace manufacturing that was pioneered by the U.S. Air Force in the 1970s. IDEF is a methodology designed to model the end-to-end decisions, actions, and activities of an organization or system so that costs, performance, and cycle times can be optimized. IDEF methods have been adapted for wider use in automotive, aerospace, pharmaceuticals, and software development industries. IDEF methods serve as a starting point to understand lean management through semantic data modeling. The IDEF process begins by mapping the existing functions of an enterprise, creating a graphical model, or road map, that shows what controls each important function, who performs it, what resources are required for carrying it out, what it produces, how much it costs, and what relationships it has to other functions of the organization. IDEF simulations have been found to be efficient at streamlining and modernizing both companies and governmental agencies. Perhaps the best-developed evolution of the IDEF model beyond Toyota was at Boeing. Their project life-cycle process has grown into a rigorous software system that links people, tasks, tools, materials, and the environmental impact of any newly planned project, before any building is allowed to begin. Routinely, more than half of the time for any given project is spent building the precedence diagrams, or three-dimensional process maps, integrating with outside suppliers, and designing the implementation plan–all on the computer. Once real activity is initiated, an action tracker is used to monitor inputs and outputs versus the schedule and delivery metrics in real time throughout the organization. When the execution of a new airplane design begins, it is so well organized that it consistently cuts both costs and build time in half for each successive generation of airframe. Boeing created a complex lean management process called 'define and control airplane configuration/manufacturing resource management' (DCAC/MRM). The process was built with the help of the operations research and computer sciences departments of the University of Pittsburgh. The manufacture of the Boeing 777 was ultimately a success, and it became the precursor to succeeding generations of CALM at Boeing. The methodology of CALM has recently been applied to field orientated infrastructure based businesses with highly interdependent systems, such as electric utilities where a smart grid concept is being researched and developed. The management of infrastructure-based industries like oil, gas, electricity, water, transportation, and renewables requires massive investments in interdependent, physical infrastructure, as well as simultaneous attention to disparate market forces. In infrastructure businesses that manage field assets, uncertainty is the biggest impediment to profitability, rather than the maintenance of efficient supply chains or the management of factory assembly lines. These businesses are dominated by risk from uncertainties such as weather, market variations, transportation disruptions, government actions, logistic difficulties, geology, and asset reliability. CALM has been applied to deal with these types of infrastructure based challenges.

    Read more →