AI App Quora

AI App Quora — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Message queuing service

A message queueing service is a message-oriented middleware or MOM deployed in a compute cloud using software as a service model. Service subscribers access queues and or topics to exchange data using point-to-point or publish and subscribe patterns. It's important to differentiate between event-driven and message-driven (aka queue driven) services: Event-driven services (e.g. AWS SNS) are decoupled from their consumers. Whereas queue / message driven services (e.g. AWS SQS) are coupled with their consumers. Message queues can be a good buffer to handle spiky workloads but they have a finite capacity. According to Gregor Hohpe, message queues require proper mechanisms (aka flow controls) to avoid filling the queue beyond its manageable capacity and to keep the system stable. == Ordering Guarantees in Message Queues == Amazon SQS FIFO and Azure Service Bus sessions are queue-based messaging systems that provide ordering guarantees within a message group or session attempt but do not necessarily guarantee ordered delivery in cases of retries or failures. In SQS FIFO, messages in the same message group are processed in order, with subsequent messages held until the preceding message is successfully processed or moved to the dead-letter queue (DLQ). Once a message is placed in the DLQ, it is no longer retried, creating a gap in the sequence. However, the remaining messages continue to be delivered in order. Azure Service Bus sessions function similarly by maintaining ordering within a session, provided a single consumer processes messages sequentially. The implementation differs from SQS FIFO but follows the same fundamental ordering principle. In contrast, Apache Kafka is a distributed log-based messaging system that guarantees ordering within individual partitions rather than across the entire topic. Unlike queue-based systems, Kafka retains messages in a durable, append-only log, allowing multiple consumers to read at different offsets. Kafka uses manual offset management, giving consumers control over retries and failure handling. If a consumer fails to process a message, it can delay committing the offset, preventing further progress in that partition while other partitions remain unaffected. This partition-based design enables fault isolation and parallel processing while allowing ordering to be maintained within partitions, depending on consumer handling. == Vendors == Apache Kafka Apache Kafka is a distributed system consisting of servers that store and forward messages between producer client and consumer applications. IBM MQ IBM MQ offers a managed service that can be used on IBM Cloud and Amazon Web Services. Microsoft Azure Service Bus Service Bus offers queues, topics & subscriptions, and rules/actions in order to support publish-subscribe, temporal decoupling, and load balancing scenarios. Azure Service Bus is built on AMQP allowing any existing AMQP 1.0 client stack to interact with Service Bus directly or via existing .Net, Java, Node, and Python clients. Standard and Premium tiers allow for pay as you go or isolated resources at massive scale. Oracle Messaging Cloud Service This service provides a messaging solution for applications for asynchronous communication and is influenced by the Java Message Service (JMS) API specification. Any application platform that understands HTTP can also use Oracle Messaging Cloud Service through the REST interface. For Java applications, Oracle Messaging Cloud Service provides a Java library that implements and extends the JMS 1.1 interface. The Java library implements the JMS API by acting as a client of the REST API. Amazon Simple Queue Service Supports messages natively up to 256K, or up to 2GB by transmitting payload via S3. Highly scalable, durable and resilient. Provides loose-FIFO and 'at least once' delivery in order to provide massive scale. Supports REST API and optional Java Message Service client. Low latency. Utilizes Amazon Web Services. IronMQ Supports messages up to 64k; guarantees order; guarantees once only delivery; no delays retrieving messages. Supports REST API and beanstalkd open source protocol. Runs on multiple clouds including AWS and Rackspace. Scaling must be managed by user. RabbitMQ RabbitMQ is a reliable and mature messaging and streaming broker, which is easy to deploy on cloud environments, on-premises, and on your local machine. Supports AMQP, STOMP, MQTT StormMQ Open platform supports messages up to 50Mb. Uses AMQP to avoid vendor lock-in and provide language neutrality. Locate-It Option allows customers to audit the location of their data at all times and satisfy data protection principles. AnypointMQ An enterprise multi-tenant, cloud messaging service that performs advanced asynchronous messaging scenarios between applications. Anypoint MQ is fully integrated with Anypoint Platform, offering role based access control, client application management, and connectors.
Read more →
Cloud printing

There are, in essence, three kinds of Cloud printing. == Benefits == 76% of IT teams have moved, or plan to move, their print workflows to the cloud due to its simplicity. Consumers can print easily to any printer from their PC, tablet or smartphone, while the Cloud print service monitors the supplies level. Many printer vendors such as Lexmark propose an automatic supplies shipment based on the real-time analysis of the printer supplies and user behavior to ensure printing will always be possible. For IT department, Cloud Printing eliminates the need for print servers and represents the only way to print from Cloud virtual desktops and servers. For consumers, cloud ready printers eliminate the need for PC connections and print drivers, enabling them to print from mobile devices. As for publishers and content owners, cloud printing allows them to "avoid the cost and complexity of buying and managing the underlying hardware, software and processes" required for the production of professional print products. Leveraging cloud print for print on demand also allows businesses to cut down on the costs associated with mass production. Moreover, cloud printing can be considered more eco-friendly, as it significantly reduces the amount of paper used (13% reduction in print jobs yearly) and lowers carbon emissions from transportation. As many companies move their IT to the Cloud, some adopting the Windows 365 and Azure Virtual Desktop services from Microsoft, the connection from the Cloud environment to the on-premise printers become an issue as opening ports for incoming print flow traffic is not an option. In 2020, at the exact same time Google discontinued its Google Print offer, Microsoft has announced its Universal Print service offer, aimed at making printing compatible with Cloud Desktop environments, making printing driver-free and simple with no client to install on PC. With Universal Print Microsoft has built a disrupting architecture with a value proposition commodifying printers, removing print servers and drivers, allowing to move printers to VLAN for security purpose and printing from anywhere. Clients are free to use any printer from any model as they all work the same, clients are not tied anymore to any printer brand and that gave a significant boost to the Cloud print market. That Microsoft Universal Print architecture provides APIs to third-party developers who can develop add-ons such as Celiveo 365 to extend Microsoft Cloud Print with added features such as access control on printers and copiers, follow-me pull print, data encryption, advanced usage reporting or charge back. == Providers of Consumer Cloud Printing Solutions == Before 2020 only a handful of providers used to work towards a professional cloud print solution, operating in their own niche or focus on mobile devices. In 2020 Microsoft has boosted that market by announcing its Universal Print Cloud printing service and since then many publishers have started to propose solutions for that growing market. The Covid pandemic also created the need for employees to be able to print at home when using the corporate IT software. Closed VPN often prevent accessing home network printers from corporate laptops and Full Public Cloud solutions are meant to be a solution to that problem. After the decision by Google to terminate Google Cloud Print service on 31 December 2020, most printer vendors released their own mobile cloud solution to fill the gap, while Hewlett-Packard implemented its own cloud print with their ePrint solution. Those solutions are often proprietary, only working on printers proposed by the vendor. Google has decided to let third-party developers develop Cloud Print solutions and to limit its scope to certifying the best Print Management offers compatible with its Chrome Enterprise Cloud ecosystem. == Providers of Corporate Cloud Printing solutions == While many print solutions claim to be "Cloud Printing", there are actually three categories: full Private Cloud, full Public Cloud, and Hybrid Cloud. Their differences are real and have an impact on the overall TCO as the more software there is on-site, the more hidden cost there are. In the Full Public Cloud category, independent SaaS vendors like Celiveo, ezeep , Printix , and Y Soft support a wide range of printer brands and models, allowing clients to buy the best printer without being locked on any brand. They are leveraging cloud computing technology to offer cloud-based print infrastructure and cloud-based printing software as a Service (SaaS). These solutions have integrations to cloud enabled printers or provide embedded printer agents. They feature allow users to print to any printer in any network, isolated network or not, even if that printer is otherwise not reachable from the user's computer. This also allows IT departments to move printers to VLAN for maximum security, like what they are doing with IP phones. Google Chrome Enterprise Cloud ecosystem has its own technical particularities and Google certifies Print Management solutions, ensuring they comply with Google technical requirement, yet letting each solution differentiate from others with specific features or security. Many of solutions for Chrome Enterprise are Hybrid, a few are Full Public Cloud. Industry experts believe that as these services become more popular, users will no longer consider printers as necessary assets but rather as devices that they can access on demand when the need to generate a printed page presents itself. == Caveats of Cloud Printing == == Security == Print jobs flow through Public Internet. It is therefore important to verify no Man-in-the-Middle attack can be performed. The only technical solution is to ensure each printer and PC uses a non-self-generated cryptographic token or certificate allowing TLS mutual authentication and specific data encryption. Self-generated printer certificates are unknown from the Cloud and prevent trusted authentication. Microsoft has implemented its Zero Trust Access security in its Universal Print service, it generates a unique certificate on printers compatible with its service. Other Cloud Printing SaaS providers have followed Microsoft on that High Security path. Print jobs data stored on the Cloud is sensitive as it contains user information as well as all information appearing on pages. Good practices require such data is encrypted at rest and in motion, using asymmetric PKI keys instead of fixed encryption keys. Some solutions require to open incoming traffic ports on the firewall to let Cloud services communicate with printers attached behind that firewall (most of the time for IPP/IPPS flows), some other solutions use a pull model where the communication is always initiated by the printer and no firewall port needs to be open. In terms of security the later is to be preferred.
Read more →
Azure Maps

Azure Maps is a suite of cloud-based, location-based services provided by Microsoft as part of the company's Azure platform. The platform provides geospatial and location-based services via REST APIs and software development kits (SDKs). The service is typically used to integrate maps or geospatial data into applications. Azure Maps differs from Microsoft's other enterprise mapping service, Bing Maps, in its pricing model, focus on privacy, and its level of integration into the broader Azure cloud ecosystem. == History == Azure Maps was first introduced in public preview mode under the name "Azure Location Based Services" in 2017, primarily as an enterprise solution. The services was intended to add mapping and location-based functionality onto the existing Azure cloud services suite, seen as a critical part of Microsoft's broader Internet-of-Things (IoT) strategy. The preview version included APIs which could be used to develop location aware apps for use cases such as logistics and mobility. In 2018, the software was renamed "Azure Maps," and became generally available to the public, and a number of new functions were added, including route calculation, travel time calculation, and incorporation of real-time traffic data and incident information. Azure Maps was integrated with Azure IoT Central in 2018, which added tracking, monitoring, and geofencing capabilities. A set of mobility APIs on were added in 2019, with applications such as use in public transport apps and shared bicycle fleet management. “Azure Maps Creator,” which converts private facility floor plans into indoor map data, was also introduced in 2019. Some commentators linked these services to Microsoft's broader development of augmented reality products. In 2020, Azure Maps Visual for Power BI was released, integrating location-based features and mapping capabilities into Microsoft's business intelligence software. An elevation API (which was later retired), geolocation services, and an iOS and Android software development kit were introduced in 2021. In 2022, support for historical weather, air quality, and tropical storm data was made generally available and custom styling for indoor maps was also introduced. In 2023, Azure Maps was certified as HIPAA compliant in a move to target healthcare and health insurance companies. == Functionality == === Geocoding === Geocoding is one of the core functionalities of Azure Maps, converting addresses or place names into geographic coordinates. Batch geocoding is used to process large amounts of address data, a function used for route optimization and spatial analysis. === Reverse geocoding === Reverse geocoding derives human-readable information from geographic coordinates like longitude and latitude, used in navigation and by geographic information systems. === Routing === Azure Maps uses map data and routing algorithms to calculate the shortest or fastest routes between locations based on factors like vehicle size and type, traffic conditions, and distance. Routing also supports multi-modal routing, which include multiple modes of transport in a single trip, including cycling, walking, and ferries. This functionality is used for location-based searches and route optimization in applications like fleet management, proximity marketing, and emergency services as well as logistics and delivery, urban planning, ride sharing apps, and outdoor activities. === Map visualization === The platform supports map visualizations that can be modified to reflect real-time data (including from IoT sensors) as well as historical data patterns. Visualizations include heat maps, street maps, satellite imagery and other custom data layers. Maps are rendered using raster or vector tiles which reduce the load of displaying large data sets or complex maps. This can be used in various applications in areas like transportation, smart cities, retail and marketing, public health, and environmental monitoring. For example, it can be used for tracking the spread of diseases or measuring the impact of changing climatic patterns. === Geofencing and spatial analytics === Azure Maps supports polygonal geofencing, which enables the definition of custom geographic boundaries. Geofenced areas can be monitored in real-time for events of interest. For example, an application could send an alert when equipment or persons enter or leave a defined area. Tools for analyzing historical geofencing data are also available via the APIs for optimization purposes. == Industry usage == Azure Maps' geofencing function has seen usage in the construction industry, designating hazardous areas for safety purposes and sending alerts if anyone enters the area. Private facility maps are used by construction companies for monitoring large construction sites to increase productivity and prevent accidents or damage. In emergency management, New Zealand based company Beca has used Azure Maps to provide analysis on the impact of earthquakes to users, including information on the severity and location of an earthquake and the impact on affected properties. Alaska's Department of Transportation uses Azure Maps as part of an information system providing weather-related warnings and analytics to road crews. Airmap, an airspace management platform for drones, uses Azure Maps. Azure Maps has also been used in conjunction with Azure Monitor for risk monitoring by an insurance company. Other companies that use or have used Azure Maps include BMW, Banco Santander, Jvion, MV Transportation, C.H. Robertson, Wise Skulls, Tata Consultancy Services, Providence Health and Services, Gas Brasiliano Distribuidora S.A., Shell plc, Persistent Systems, Phase 2 Dining and Entertainment, Symbio, HID, Globant, and Insight Enterprises. == Partnerships == Azure Maps and TomTom have been partners since 2016, and TomTom provides location data to Azure Maps and can process data from Azure Maps for mapping purposes. In 2021, Azure Maps partnered with AccuWeather to make climatic data available via its APIs, making weather data along all parts of calculated routes available for mobility and logistics purposes. Microsoft has partnered with Esri, the developer of ArcGIS, and there is cross-compatibility between Azure and ArcGIS so that data from Azure Maps can be integrated into ArcGIS and vice versa. Azure Maps partnered with Moovit in 2019, a startup providing software that interfaces with public transport data. Moovit's database on global public transit networks, including information on which stations and facilities are wheelchair accessible, was linked to Azure Maps. This service was noted for its use increasing accessibility to public transport for the visually impaired by means of voice activated route planning assistance. NORAD has used some Azure Maps functions for their NORAD Tracks Santa website during Christmas holidays. == Components == === REST APIs === Various APIs cover the major functionalities across Azure Maps: Data registry API Geolocation API Render API Route API Search API Spatial API Time zone API Traffic API Weather API === SDKs === Azure Maps SDKs uses MapLibre-style specifications and open source MapLibre GL-based libraries as a rendering engine. The Web SDK is used for developing web apps with maps and location-based data and functionality. It includes a map control module as well as modules with drawing tools. It also supports Azure Maps Creator and various spatial data formats. The platform also includes a set of REST SDKs for developers integrating Azure Maps REST APIs into Python, C#, Java or JavaScript applications. Azure Maps also includes Android and iOS SDKs used for developing applications for Android and Apple devices. === Azure Maps Creator === Azure Maps Creator is a tool for generating custom maps for locations like large office complexes, construction sites, or university campuses. These maps can then be integrated into applications and used with other Azure Maps functions for purposes such as wayfinding and maintenance and security in building automation contexts. === Azure Maps Visual for Power BI === Azure Maps is integrated with Microsoft Power BI, a graphical tool for producing data visualizations. Since July 2020, Power BI can be used in conjunction with Azure Maps for developing map-based data visualizations. This functionality entered general availability in May 2023.
Read more →
C3D Toolkit

C3D Toolkit is a proprietary cross-platform geometric modeling kit software developed by Russian C3D Labs (previously part of ASCON Group). It's written in C++ . It can be licensed by other companies for use in their 3D computer graphics software products. The most widely known software in which C3D Toolkit is typically used are computer aided design (CAD), computer-aided manufacturing (CAM), and computer-aided engineering (CAE) systems. C3D Toolkit provides routines for 3D modeling, 3D constraint solving, polygonal mesh-to-B-rep conversion, 3D visualization, and 3D file conversions etc. == History == Nikolai Golovanov is a graduate of the Mechanical Engineering department of Bauman Moscow State Technical University as a designer of space launch vehicles. Upon his graduation, he began with the Kolomna Engineering Design bureau, which at the time employed the future founders of ASCON, Alexander Golikov and Tatiana Yankina. While at the bureau, Dr Golovanov developed software for analyzing the strength and stability of shell structures. In 1989, Alexander Golikov and Tatiana Yankina left Kolomna to start up ASCON as a private company. Although they began with just an electronic drawing board, even then they were already conceiving the idea of three-dimensional parametric modeling. This radical concept eventually changed flat drawings into three-dimensional models. The ASCON founders shared their ideas with Nikolai Golovanov, and in 1996 he moved to take up his current position with ASCON. As of 2012 he was involved in developing algorithms for C3D Toolkit. In 2012 the earliest version of the C3D Modeller kernel was extracted from KOMPAS-3D CAD. It was later adopted to a range of different platforms and advertised as a separate product. == Overview == It incorporates five modules: C3D Modeler constructs geometric models, generates flat projections of models, performs triangulations, calculates the inertial characteristics of models, and determines whether collisions occur between the elements of models; C3D Modeler for ODA enables advanced 3D modeling operations through the ODA's standard "OdDb3DSolid" API from the Open Design Alliance; C3D Solver makes connections between the elements of geometric models, and considers the geometric constraints of models being edited; C3D B-Shaper converts polygonal models to boundary representation (B-rep) bodies; C3D Vision controls the quality of rendering for 3D models using mathematical apparatus and software, and the workstation hardware; C3D Converter reads and writes geometric models in a variety of standard exchange formats. == Features == == Development == == Applications == Since 2013 - the date the company started issuing a license for the toolkit -, several companies have adopted C3D software components for their products, users include: Recently, C3D Modeler has been adapted to ODA Platform. In April 2017, C3D Viewer was launched for end users. The application allows to read 3D models in common formats and write it to the C3D file format. Free version is available.
Read more →
Non-separable wavelet

Non-separable wavelets are multi-dimensional wavelets that are not directly implemented as tensor products of wavelets on some lower-dimensional space. They have been studied since 1992. They offer a few important advantages. Notably, using non-separable filters leads to more parameters in design, and consequently better filters. The main difference, when compared to the one-dimensional wavelets, is that multi-dimensional sampling requires the use of lattices (e.g., the quincunx lattice). The wavelet filters themselves can be separable or non-separable regardless of the sampling lattice. Thus, in some cases, the non-separable wavelets can be implemented in a separable fashion. Unlike separable wavelet, the non-separable wavelets are capable of detecting structures that are not only horizontal, vertical or diagonal (show less anisotropy). == Examples == Red-black wavelets Contourlets Shearlets Directionlets Steerable pyramids Non-separable schemes for tensor-product wavelets
Read more →
Too Good To Go

Too Good To Go is a service with a mobile application that connects customers to restaurants and stores that have surplus unsold food. The service covers major European cities, and in October 2020 started operations in North America. As part of the initiatives taken on the International Day of Awareness of Food Loss and Waste to reduce food loss and waste, the app is suggested alongside OLIO among many others. In 2023 Too Good To Go was the fastest-growing sustainable food app startup by number of downloads. As of August 2023, it claimed 164,000 businesses, serving 62 million users, have saved 155 million bags of food. As of March 2023, it claimed to have saved over 200 million meals. == History == The company was created in 2015 in Denmark by Thomas Bjørn Momsen, Klaus Bagge Pedersen, Adam Sigbrand and Brian Christensen. In 2017, Mette Lykke (co-founder of Endomondo) joined as CEO. In February 2019, the company raised an additional 6 million euros in a new round of investment. In August 2019, Too Good To Go was re-launched in Austria. In September 2019, Too Good To Go acquired the Spanish startup weSAVEeat and merged it into its own brand. In November 2019, the offer of Too Good To Go extended to plants through a partnership with the French retail plants company Jardiland. In December 2019, Too Good To Go partnered with the French grocery retail stores Intermarché, and donated 60K euros to the French charity Restaurants du Cœur. In October 2021, Bonnie Wright teamed up with Too Good To Go to drive the initiative to reduce food waste. == Corporate affairs == The key trends for the Danish entity Too Good To Go ApS are (as of the financial year ending December 31): == International expansion == As of March 2026 the company serves the European countries Austria, Belgium, Czechia, Denmark, the Faroe Islands, France, Germany, Ireland, Italy, the Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, the United Kingdom. Outside of Europe the service is available in Australia, Canada, Japan, New Zealand and the United States. == Purpose == The purpose of Too Good To Go is to reduce food waste worldwide. It developed a mobile application that connects restaurants and stores that have unsold, surplus food, with customers who can then buy whatever food the outlet considers surplus to requirements—without being able to choose—at a much lower price than normal. The food on the app is priced at one-third its original price. The company claims this reduces the waste of food that would otherwise be discarded; food waste is a global problem that affects the environment. In three years active, the app reached more than 9.5 million users. As of 2022, more than 57.7 million users and 154,000 establishments have signed up, and 139 million meals have been collected. In 2019, the company had 350 employees in Europe. As of June 2023 the company was estimated to have 1,289 employees. == Use == Food outlets must notify the TGTG company about what they have available on each day, stating what sort of food they have (baked foods, meals, produce, vegan food), and the price for a 'surprise bag', whose contents they determine; the user cannot choose, but the original prices will be three or more times the TGTG price. Notification is made early based upon the quantity predicted to be left over, not at the end of a selling period. Users must register to use the service. A mobile phone with an Internet connection running Android or iOS is needed. The user runs the TGTG app, which lists outlets available within a chosen distance and time range. The customer can then order and pay for a 'surprise bag'. The supplier can cancel an order at any time if the expected surplus is not available—the purchaser is notified by text message—and the purchaser can cancel with two hours' notice. The phone must be taken to the food supplier in a specified pickup time window, often 30 or 60 minutes long, and the transaction is finalised by swiping the app—connected to the Internet—to confirm collection.
Read more →
Web application firewall

A Web application firewall (WAF) is a specific form of application firewall that filters, monitors, and blocks HTTP traffic to and from a web service. By inspecting HTTP traffic, it can prevent attacks exploiting a Web application's known vulnerabilities, such as SQL injection, cross-site scripting (XSS), file inclusion, and improper system configuration. Financial institutions often utilize WAFs to help in the mitigation of Web application zero-day vulnerabilities, as well as hard-to-patch bugs or weaknesses through custom attack signature strings. == History == Dedicated Web application firewalls entered the market in the late 1990s during a time when web server attacks were becoming more prevalent. Early WAF products, from Kavado and Gilian technologies, tried to solve the increasing amount of attacks on Web applications in the late 1990s. In 2002, the open-source project ModSecurity was formed in order to make WAF technology more accessible. They finalized a core rule set for protecting Web applications, based on OASIS Web Application Security Technical Committee’s (WAS TC) vulnerability work. In 2003, they expanded and standardized rules through the Open Web Application Security Project’s (OWASP) Top 10 List, an annual ranking for Web security vulnerabilities. This list would become the industry standard for Web application security compliance. Since then, the market has continued to grow and evolve, especially focusing on credit card fraud prevention. With the development of the Payment Card Industry Data Security Standard (PCI DSS), a standardization of control over cardholder data, security has become more regulated in this sector. == Description == A Web application firewall is a special type of application firewall that applies specifically to Web applications. It is deployed in front of Web applications and analyzes bi-directional web-based (HTTP) traffic – detecting and blocking anything malicious. The OWASP provides a broad technical definition for a WAF as “a security solution on the Web application level which – from a technical point of view – does not depend on the application itself”. According to the PCI DSS Information Supplement for requirement 6.6, a WAF is defined as “a security policy enforcement point positioned between a Web application and the client endpoint. This functionality can be implemented in software or hardware, running in an appliance device, or in a typical server running a common operating system. It may be a stand-alone device or integrated into other network components.” In other words, a WAF can be a virtual or physical appliance that prevents vulnerabilities in Web applications from being exploited by outside threats. These vulnerabilities may be because the application itself is a legacy type or was insufficiently coded by design. The WAF addresses these code shortcomings by special configurations of rule-sets, also known as policies. Previously unknown vulnerabilities can be discovered through penetration testing or via a vulnerability scanner. A Web application vulnerability scanner, also known as a web application security scanner, is defined in the SAMATE NIST 500-269 as “an automated program that examines Web applications for potential security vulnerabilities. In addition to searching for Web application-specific vulnerabilities, the tools also look for software coding errors.” Resolving vulnerabilities is commonly referred to as remediation. Corrections to the code can be made in the application, but typically a more prompt response is necessary. In these situations, the application of a custom policy for a unique Web application vulnerability to provide a temporary but immediate fix (known as a virtual patch) may be necessary. WAFs are not an ultimate security solution, rather they are meant to be used in conjunction with other network perimeter security solutions such as network firewalls and intrusion prevention systems to provide a holistic defense strategy. WAFs typically follow a positive security model, a negative security, or a combination of both as mentioned by the SANS Institute. WAFs use a combination of rule-based logic, parsing, and signatures to detect and prevent attacks such as cross-site scripting and SQL injection. In general, features like browser emulation, obfuscation and virtualization, and IP obfuscation are used to attempt to bypass WAFs. The OWASP produces a list of the top ten Web application security flaws. All commercial WAF offerings cover these ten flaws at a minimum. There are non-commercial options as well. As mentioned earlier, the well-known open-source WAF engine called ModSecurity is one of these options. A WAF engine alone is insufficient to provide adequate protection, therefore OWASP along with Trustwave's Spiderlabs help organize and maintain a Core-Rule Set via GitHub to use with the ModSecurity WAF engine. == Deployment options == Although the names for operating mode may differ, WAFs are basically deployed inline in three different ways. According to NSS Labs, deployment options are transparent bridge, transparent reverse proxy, and reverse proxy. "Transparent" refers to the fact that the HTTP traffic is sent straight to the Web application, therefore the WAF is transparent between the client and server. This is in contrast to reverse proxy, where the WAF acts as a proxy, and the client’s traffic is sent directly to the WAF. The WAF then separately sends filtered traffic to Web applications. This can provide additional benefits such as IP masking but may introduce disadvantages such as performance latencies. == JA3 fingerprint == JA3, developed by Salesforce in 2017, is a technique for generating a unique fingerprint for SSL/TLS traffic based on specific fields in the handshake, such as the version, cipher suites, and extensions used by the client. This fingerprint enables the identification and tracking of clients based on the characteristics of their encrypted traffic. In the context of distributed denial of service (DDoS) protection, JA3 fingerprints are used to detect and differentiate malicious traffic, often associated with attack bots, from legitimate traffic, allowing for more precise filtering of potential threats. In September 2023, AWS WAF announced built-in support for JA3, enabling customers to inspect the JA3 fingerprints of incoming requests. JA3 was deprecated in May 2025 in favor of JA4. JA4 is currently patent pending.
Read more →
Poop Map

Poop Map is a social app where users can track on a map where and when they defecate. In addition to logging location and time of each bowel movement, users can also add a photo, "like" other users' logs, and rate each account. The social elements of the app allow for groups of users to create a competitive league. Certain behaviors unlock achievements in-app. == Development == The app was created by app developer Nino Uzelac. It was launched in July 2013. == Popularity == The app charted at number one on the Apple App Store charts in 2021 after going viral on TikTok. As of September 2024, the app has a 4.8 rating on the App Store and more than 58,000 ratings. It also has more than one million downloads on the Google Play Store. Poop Map is notably popular among hikers, and has been written about in the outdoors magazine Outside.
Read more →
Imo.im

imo.im is a proprietary audio/video calling and instant messaging software service. It allows sending music, video, PDFs and other files, along with various free stickers. It supports encrypted group video and voice calls with up to 20 participants. According to its developer, the service possesses over 200 million users and over 50 million messages per day are sent through it. == History == The product was created as a web-based application in 2005 for accessing multiple chat platforms, including Facebook Messenger, Google Talk, Yahoo! Messenger, and Skype chat. It was developed by Pagebites, which is a subsidiary of Singularity IM, Inc. and required a subscriber's phone number to verify the users' account. In March 2014, support for all third-party messaging networks ended. In January 2018, the app reached 500 million installs. imo.im has implemented end-to-end encryption for its chats and calls, ensuring that the conversations remain private between the sender and receiver.
Read more →
Recruitee

Tellent Recruitee is a cloud-based applicant tracking system (ATS) for talent acquisition owned by Tellent. It is used by internal HR teams for processes including job postings, candidate sourcing, reporting, and applicant tracking. == History == Perry Oostdam and Pawel Smoczyk founded Recruitee after working on a mobile gaming startup. The Recruitee was launched in August 2015. In September 2015, it received a seed funding round with participation from investors Robert Pijselman and Luc Brandts. Merger In February 2021, Recruitee and the Finnish HR software provider Sympa merged their operations, backed by the growth equity firm Providence Strategic Growth (PSG). Acquisition In 2022, the group acquired the French company Javelo and the German company kiwiHR. The parent company was subsequently renamed as Tellent while Recruitee renamed as Tellent Recruitee and continues to operate as a product unit within the Tellent group. == Platform == Tellent Recruitee is a customizable recruitment software. It functions as an ATS and talent acquisition platform and includes tools to create and publish job listings, source candidates, manage recruitment agencies, and track applicants through customizable pipelines. The interface allows drag-and-drop organization of candidates. The platform also includes features for team collaboration, such as shared notes, task assignments, and candidate evaluations. It also has integrated scheduling tools and automated email communication. Tellent Recruitee also provides analytics and reports on hiring and career site metrics. The software allows for customization of career site pages and application forms. It supports integrations with other HR and productivity software, such as WhatsApp, and has various AI functionalities to support with manual recruitment tasks.
Read more →
Software development process

A software development process prescribes a process for developing software. It typically divides an overall effort into smaller steps or sub-processes that are intended to ensure high-quality results. The process may describe specific deliverables – artifacts to be created and completed. Although not strictly limited to it, software development process often refers to the high-level process that governs the development of a software system from its beginning to its end of life – known as a methodology, model or framework. The system development life cycle (SDLC) describes the typical phases that a development effort goes through from the beginning to the end of life for a system – including a software system. A methodology prescribes how engineers go about their work in order to move the system through its life cycle. A methodology is a classification of processes or a blueprint for a process that is devised for the SDLC. For example, many processes can be classified as a spiral model. Software process and software quality are closely interrelated; some unexpected facets and effects have been observed in practice. == Methodology == The SDLC drives the definition of a methodology in that a methodology must address the phases of the SDLC. Generally, a methodology is designed to result in a high-quality system that meets or exceeds expectations (requirements) and is delivered on time and within budget even though computer systems can be complex and integrate disparate components. Various methodologies have been devised, including waterfall, spiral, agile, rapid prototyping, incremental, and synchronize and stabilize. A major difference between methodologies is the degree to which the phases are sequential vs. iterative. Agile methodologies, such as XP and scrum, focus on lightweight processes that allow for rapid changes. Iterative methodologies, such as Rational Unified Process and dynamic systems development method, focus on stabilizing project scope and iteratively expanding or improving products. Sequential or big-design-up-front (BDUF) models, such as waterfall, focus on complete and correct planning to guide larger projects and limit risks to successful and predictable results. Anamorphic development is guided by project scope and adaptive iterations. In scrum, for example, one could say a single user story goes through all the phases of the SDLC within a two-week sprint. By contrast the waterfall methodology, where every business requirement is translated into feature/functional descriptions which are then all implemented typically over a period of months or longer. A project can include both a project life cycle (PLC) and an SDLC, which describe different activities. According to Taylor (2004), "the project life cycle encompasses all the activities of the project, while the systems development life cycle focuses on realizing the product requirements". === History === The term SDLC is often used as an abbreviated version of SDLC methodology. Further, some use SDLC and traditional SDLC to mean the waterfall methodology. According to Elliott (2004), SDLC "originated in the 1960s, to develop large scale functional business systems in an age of large scale business conglomerates. Information systems activities revolved around heavy data processing and number crunching routines". The structured systems analysis and design method (SSADM) was produced for the UK government Office of Government Commerce in the 1980s. Ever since, according to Elliott (2004), "the traditional life cycle approaches to systems development have been increasingly replaced with alternative approaches and frameworks, which attempted to overcome some of the inherent deficiencies of the traditional SDLC". The main idea of the SDLC has been "to pursue the development of information systems in a very deliberate, structured and methodical way, requiring each stage of the life cycle––from the inception of the idea to delivery of the final system––to be carried out rigidly and sequentially" within the context of the framework being applied. Other methodologies were devised later: 1970s Structured programming since 1969 Cap Gemini SDM, originally from PANDATA, the first English translation was published in 1974. SDM stands for System Development Methodology 1980s Structured systems analysis and design method (SSADM) from 1980 onwards Information Requirement Analysis/Soft systems methodology 1990s Object-oriented programming (OOP) developed in the early 1960s and became a dominant programming approach during the mid-1990s Rapid application development (RAD), since 1991 Dynamic systems development method (DSDM), since 1994 Scrum, since 1995 Team software process, since 1998 Rational Unified Process (RUP), maintained by IBM since 1998 Extreme programming, since 1999 2000s Agile Unified Process (AUP) maintained since 2005 by Scott Ambler Disciplined agile delivery (DAD) Supersedes AUP 2010s Scaled Agile Framework (SAFe) Large-Scale Scrum (LeSS) DevOps Since DSDM in 1994, all of the methodologies on the above list except RUP have been agile methodologies - yet many organizations, especially governments, still use pre-agile processes (often waterfall or similar). === Examples === The following are notable methodologies somewhat ordered by popularity. Agile Agile software development refers to a group of frameworks based on iterative development, where requirements and solutions evolve via collaboration between self-organizing cross-functional teams. The term was coined in the year 2001 when the Agile Manifesto was formulated. Waterfall The waterfall model is a sequential development approach, in which development flows one-way (like a waterfall) through the SDLC phases. Spiral In 1988, Barry Boehm published a software system development spiral model, which combines key aspects of the waterfall model and rapid prototyping, in an effort to combine advantages of top-down and bottom-up concepts. It emphases a key area many felt had been neglected by other methodologies: deliberate iterative risk analysis, particularly suited to large-scale complex systems. Incremental Various methods combine linear and iterative methodologies, with the primary objective of reducing inherent project risk by breaking a project into smaller segments and providing more ease-of-change during the development process. Prototyping Software prototyping is about creating prototypes, i.e. incomplete versions of the software program being developed. Rapid Rapid application development (RAD) is a methodology which favors iterative development and the rapid construction of prototypes instead of large amounts of up-front planning. The "planning" of software developed using RAD is interleaved with writing the software itself. The lack of extensive pre-planning generally allows software to be written much faster and makes it easier to change requirements. Shape Up Shape Up is a software development approach introduced by Basecamp in 2018. It is a set of principles and techniques that Basecamp developed internally to overcome the problem of projects dragging on with no clear end. Its primary target audience is remote teams. Shape Up has no estimation and velocity tracking, backlogs, or sprints, unlike waterfall, agile, or scrum. Instead, those concepts are replaced with appetite, betting, and cycles. As of 2022, besides Basecamp, notable organizations that have adopted Shape Up include UserVoice and Block. Chaos Chaos model has one main rule: always resolve the most important issue first. Incremental funding Incremental funding methodology - an iterative approach. Lightweight Lightweight methodology - a general term for methods that only have a few rules and practices. Structured systems analysis and design Structured systems analysis and design method - a specific version of waterfall. Slow programming As part of the larger slow movement, emphasizes careful and gradual work without (or minimal) time pressures. Slow programming aims to avoid bugs and overly quick release schedules. V-Model V-Model (software development) - an extension of the waterfall model. Unified Process Unified Process (UP) is an iterative software development methodology framework, based on Unified Modeling Language (UML). UP organizes the development of software into four phases, each consisting of one or more executable iterations of the software at that stage of development: inception, elaboration, construction, and guidelines. === Comparison === The waterfall model describes the SDLC phases such that each builds on the result of the previous one. Not every project requires that the phases be sequential. For relatively simple projects, phases may be combined or overlapping. Alternative methodologies to waterfall are described and compared below. == Process meta-models == Some process models are abstract descriptions for evaluating, comparing, and improving the specific process adopted by an organization. ISO/IEC 12207 ISO/IEC 12207 i
Read more →
Digital image correlation and tracking

Digital image correlation and tracking is an optical method that employs tracking and image registration techniques for accurate 2D and 3D measurements of changes in 2D images or 3D volumes. This method is often used to measure full-field displacement and strains, and it is widely applied in many areas of science and engineering. Compared to strain gauges and extensometers, digital image correlation methods provide finer details about deformation, due to the ability to provide both local and average data. == Overview == Digital image correlation (DIC) techniques have been increasing in popularity, especially in micro- and nano-scale mechanical testing applications due to their relative ease of implementation and use. Advances in computer technology and digital cameras have been the enabling technologies for this method and while white-light optics has been the predominant approach, DIC can be and has been extended to almost any imaging technology. The concept of using cross-correlation to measure shifts in datasets has been known for a long time, and it has been applied to digital images since at least the early 1970s. The present-day applications are almost innumerable, including image analysis, image compression, velocimetry, and strain estimation. Much early work in DIC in the field of mechanics was led by researchers at the University of South Carolina in the early 1980s and has been optimized and improved in recent years. Commonly, DIC relies on finding the maximum of the correlation array between pixel intensity array subsets on two or more corresponding images, which gives the integer translational shift between them. It is also possible to estimate shifts to a finer resolution than the resolution of the original images, which is often called "sub-pixel" registration because the measured shift is smaller than an integer pixel unit. For sub-pixel interpolation of the shift, other methods do not simply maximize the correlation coefficient. An iterative approach can also be used to maximize the interpolated correlation coefficient by using non-linear optimization techniques. The non-linear optimization approach tends to be conceptually simpler and can handle large deformations more accurately, but as with most nonlinear optimization techniques, it is slower. The two-dimensional discrete cross correlation r i j {\displaystyle r_{ij}} can be defined in several ways, one possibility being: r i j = ∑ m ∑ n [ f ( m + i , n + j ) − f ¯ ] [ g ( m , n ) − g ¯ ] ∑ m ∑ n [ f ( m , n ) − f ¯ ] 2 ∑ m ∑ n [ g ( m , n ) − g ¯ ] 2 . {\displaystyle r_{ij}={\frac {\sum _{m}\sum _{n}[f(m+i,n+j)-{\bar {f}}][g(m,n)-{\bar {g}}]}{\sqrt {\sum _{m}\sum _{n}{[f(m,n)-{\bar {f}}]^{2}}\sum _{m}\sum _{n}{[g(m,n)-{\bar {g}}]^{2}}}}}.} Here f(m, n) is the pixel intensity or the gray-scale value at a point (m, n) in the original image, g(m, n) is the gray-scale value at a point (m, n) in the translated image, f ¯ {\displaystyle {\bar {f}}} and g ¯ {\displaystyle {\bar {g}}} are mean values of the intensity matrices f and g respectively. However, in practical applications, the correlation array is usually computed using Fourier-transform methods, since the fast Fourier transform is a much faster method than directly computing the correlation. F = F { f } , G = F { g } . {\displaystyle \mathbf {F} ={\mathcal {F}}\{f\},\quad \mathbf {G} ={\mathcal {F}}\{g\}.} Then taking the complex conjugate of the second result and multiplying the Fourier transforms together elementwise, we obtain the Fourier transform of the correlogram, R {\displaystyle \ R} : R = F ∘ G ∗ , {\displaystyle R=\mathbf {F} \circ \mathbf {G} ^{},} where ∘ {\displaystyle \circ } is the Hadamard product (entry-wise product). It is also fairly common to normalize the magnitudes to unity at this point, which results in a variation called phase correlation. Then the cross-correlation is obtained by applying the inverse Fourier transform: r = F − 1 { R } . {\displaystyle \ r={\mathcal {F}}^{-1}\{R\}.} At this point, the coordinates of the maximum of r i j {\displaystyle r_{ij}} give the integer shift: ( Δ x , Δ y ) = arg ⁡ max ( i , j ) { r } . {\displaystyle (\Delta x,\Delta y)=\arg \max _{(i,j)}\{r\}.} == Deformation mapping == For deformation mapping, the mapping function that relates the images can be derived from comparing a set of subwindow pairs over the whole images. (Figure 1). The coordinates or grid points (xi, yj) and (xi, yj) are related by the translations that occur between the two images. If the deformation is small and perpendicular to the optical axis of the camera, then the relation between (xi, yj) and (xi, yj) can be approximated by a 2D affine transformation such as: x ∗ = x + u + ∂ u ∂ x Δ x + ∂ u ∂ y Δ y , {\displaystyle x^{}=x+u+{\frac {\partial u}{\partial x}}\Delta x+{\frac {\partial u}{\partial y}}\Delta y,} y ∗ = y + v + ∂ v ∂ x Δ x + ∂ v ∂ y Δ y . {\displaystyle y^{}=y+v+{\frac {\partial v}{\partial x}}\Delta x+{\frac {\partial v}{\partial y}}\Delta y.} Here u and v are translations of the center of the sub-image in the X and Y directions respectively. The distances from the center of the sub-image to the point (x, y) are denoted by Δ x {\displaystyle \Delta x} and Δ y {\displaystyle \Delta y} . Thus, the correlation coefficient rij is a function of displacement components (u, v) and displacement gradients ∂ u ∂ x , ∂ u ∂ y , ∂ v ∂ x , ∂ v ∂ y . {\displaystyle {\frac {\partial u}{\partial x}},{\frac {\partial u}{\partial y}},{\frac {\partial v}{\partial x}},{\frac {\partial v}{\partial y}}.} DIC has proven to be very effective at mapping deformation in macroscopic mechanical testing, where the application of specular markers (e.g. paint, toner powder) or surface finishes from machining and polishing provide the needed contrast to correlate images well. However, these methods for applying surface contrast do not extend to the application of free-standing thin films for several reasons. First, vapor deposition at normal temperatures on semiconductor grade substrates results in mirror-finish quality films with RMS roughnesses that are typically on the order of several nanometers. No subsequent polishing or finishing steps are required, and unless electron imaging techniques are employed that can resolve microstructural features, the films do not possess enough useful surface contrast to adequately correlate images. Typically this challenge can be circumvented by applying paint that results in a random speckle pattern on the surface, although the large and turbulent forces resulting from either spraying or applying paint to the surface of a free-standing thin film are too high and would break the specimens. In addition, the sizes of individual paint particles are on the order of μms, while the film thickness is only several hundred nanometers, which would be analogous to supporting a large boulder on a thin sheet of paper. == Digital volume correlation == Digital Volume Correlation (DVC, and sometimes called Volumetric-DIC) extends the 2D-DIC algorithms into three dimensions to calculate the full-field 3D deformation from a pair of 3D images. This technique is distinct from 3D-DIC, which only calculates the 3D deformation of an exterior surface using conventional optical images. The DVC algorithm is able to track full-field displacement information in the form of voxels instead of pixels. The theory is similar to above except that another dimension is added: the z-dimension. The displacement is calculated from the correlation of 3D subsets of the reference and deformed volumetric images, which is analogous to the correlation of 2D subsets described above. DVC can be performed using volumetric image datasets. These images can be obtained using confocal microscopy, X-ray computed tomography, Magnetic Resonance Imaging or other techniques. Similar to the other DIC techniques, the images must exhibit a distinct, high-contrast 3D "speckle pattern" to ensure accurate displacement measurement. DVC was first developed in 1999 to study the deformation of trabecular bone using X-ray computed tomography images. Since then, applications of DVC have grown to include granular materials, metals, foams, composites and biological materials. To date it has been used with images acquired by MRI imaging, Computer Tomography (CT), micro-CT, confocal microscopy, and lightsheet microscopy. DVC is currently considered to be ideal in the research world for 3D quantification of local displacements, strains, and stress in biological specimens. It is preferred because of the non-invasiveness of the method over traditional experimental methods. Two of the key challenges are improving the speed and reliability of the DVC measurement. The 3D imaging techniques produce noisier images than conventional 2D optical images, which reduces the quality of the displacement measurement. Computational speed is restricted by the file sizes of 3D images, which are significantly larger than 2D images. For example, an
Read more →
AirDine

AirDine was a mobile app within the platform economy where individuals acted as both supplier and customer for a supper club. AirDine discontinued their service after 31 October 2017. == Operations == AirDine was an online marketplace for home dining that connected users that liked to cook with users looking for a dining experience. Users were categorized as "Hosts" and "Guests," both of whom needed to register with AirDine. AirDine acted as a two-sided market for home dining that allowed hosts and guests, and did not act as a restaurant or host any dinners itself. AirDine charged a service fee. Security and safety of the host were not vetted by AirDine and were completely left to users based on published reviews. Profiles included user reviews and shared social connections to build trust among users. AirDine also included a private messaging system.
Read more →
Content as a service

Content as a service (CaaS) or managed content as a service (MCaaS) is a service-oriented model, where the service provider delivers the content on demand to the service consumer via web services that are licensed under subscription. The content is hosted by the service provider centrally in the cloud and offered to a number of consumers that need the content delivered into any applications or system, hence content can be demanded by the consumers as and when required. Content as a Service is a way to provide raw content (in other words, without the need for a specific human compatible representation, such as HTML) in a way that other systems can make use of it. Content as a Service is not meant for direct human consumption, but rather for other platforms to consume and make use of the content according to their particular needs. This happens usually on the cloud, with a centralized platform which can be globally accessible and provides a standard format for your content. With Content as a Service, you centralize your content into a single repository, where you can manage it, categorize it, make it available to others, search for it, or do whatever you wish with it. == Overview == The content delivered typically could be one or more of the following The technical terminology related to equipment or spares that is required to procure or design the materials The industrial terminology of the equipment or spares Technical values pertaining to various types, specifications, applications, characteristics of equipment or spares Sourcing information which will help in procurement or supply-chain management of equipment or spares Descriptive specifications of equipment or spares based on the product reference number or identifier UNSPSC codes or industry practiced classifications ISO, IEC compliant terminology Ontology or Technical Dictionary of products & services Predefined content for specific business needs The term "Content as a service" (CaaS) is considered to be part of the nomenclature of cloud computing service models & Service-oriented architecture along with Software as a service (SaaS), Infrastructure as a service (IaaS), and Platform as a service (PaaS).
Read more →
Gcore

Gcore is an edge AI, cloud, network, and security company headquartered in Luxembourg. Founded in 2014, the company provides low-latency services to industries including finance, healthcare, manufacturing, gaming, media and telecommunications internationally. As of March 2024, its global network includes over 180 Points of Presence (PoPs) across six continents. == History == Gcore was founded in 2014 in Luxembourg. The company built its own content delivery network, originally designed for the needs of the gaming industry. In 2016, Gcore's infrastructure expanded to multiple regions that were underserved by hyperscale cloud providers. In 2020, the company formed partnerships with Intel and Equinix. In 2022, Gcore launched the European AI Cloud, providing access to infrastructure for machine learning tasks. In March 2024, Gcore announced the acquisition of a web application and API protection (WAAP) solution from StackPath. In April 2024, Gcore received a commendation in the Industry Innovation category at the NVIDIA Partner Network Awards EMEA for developing the first speech-to-text technology for Luxembourgish, using the LuxemBERT AI model. In May 2024, Philipp Rösler, former vice-chancellor of Germany and federal minister of health joined the Gcore board. In July 2024, Gcore raised $60 million in a Series A funding round, marking the company's first external investment since its founding. In August 2024, Gcore was recognized as a Major Player in the IDC MarketScape report for European public cloud Infrastructure (IaaS) 2024 by IDC, the global market intelligence firm. In May 2025, Feiyu Xu became a member of the Gcore advisory board. == Network infrastructure == According to the company's website, Gcore has network locations in six continents: Europe, North America, Asia, South America, Africa, and Australia with over 14,000 peering partners and a network capacity exceeding 200 Tbps. According to a 2025 review by Geekflare, Gcore's CDN achieved an average global response time of around 30 milliseconds. Gcore offers AI cloud clusters, including a generative AI cluster with Nvidia GPUs in Luxembourg and additional sites in the Netherlands and Wales, as part of its European AI infrastructure. == Products and services == Gcore offers a range of services, including content delivery network (CDN), cloud computing,virtual machines, bare-metal servers, object storage AI infrastructure and inference, Kubernetes, video streaming, DDoS mitigation, web application and API protection (WAAP), Domain Name System (DNS). Gcore provides AI services and GPU cloud infrastructure to support model development, training, fine-tuning, and inference. In January 2025, the company introduced Everywhere Inference, a serverless inference solution that enables AI model deployment. == Controversies == Correctiv and Tageszeitung reported that Gcore supported the distribution of the TV network RT until April 2023, which has been under sanctions by the EU since March 2022. However, Gcore denies these allegations. == Collaborations == In 2024, Gcore and Qareeb Data Centres, a data center provider in the Middle East, launched a collaboration to integrate Gcore's AI, cloud and edge services across data centers in multiple Middle Eastern countries. In June 2025, Gcore joined the SmartSpires initiative, a €3.1 million smart city project co-funded by the Connecting Europe Facility. The three-year programme is coordinated by a public–private consortium including 5SKYE, the Luxembourg Institute of Science and Technology (LIST), Orange Luxembourg, and Gcore. The project aims to transform the Belval campus into a smart city by deploying 5G-enabled smart towers that integrate edge computing, artificial intelligence and IoT services. Within the consortium, Gcore acts as project coordinator and is responsible for the deployment of the edge infrastructure.
Read more →