AI App Notebook Lm

AI App Notebook Lm — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Scientific Working Group – Imaging Technology

  The Scientific Working Group on Imaging Technology was convened by the Federal Bureau of Investigation in 1997 to provide guidance to law enforcement agencies and others in the criminal justice system regarding the best practices for photography, videography, and video and image analysis. This group was terminated in 2015. == History == As technology has advanced through the years, law enforcement has needed to stay abreast of emerging technological advances and use these in the investigation of crime. A factor that is considered when new technology is used in these investigations is the determination of whether the use of that new technology will be admissible in court. The judicial system in the United States currently has two standards used in the determination of admissibility of testimony regarding scientific evidence; the Daubert Standard and the Frye Standard. These standards guide the courts in the admissibility of testimony derived from the use of new technologies and scientific techniques. The Federal Bureau of Investigation (FBI), seeking to address possible admissibility issues with such testimony, established Scientific Working Groups starting with the Scientific Working Group on DNA Analysis and Methods (SWGDAM) in 1988. The goal of these groups is to open lines of communication between law enforcement agencies and forensic laboratories around the world while providing guidance on the use of new and innovative technologies and techniques. This guidance can lead to admissibility of evidence and/or testimony, provided proper methods in the collection of evidence and its analysis are employed. In 2009, the National Academy of Sciences released a report entitled, "Strengthening Forensic Science in the United States: A Path Forward." This report addresses many topics including challenges and disparities facing the forensic science community, standardization, certification of practitioners and accreditation of their respective entities, problems related to the interpretation of forensic evidence, the need for research, and the admission of forensic science evidence in litigation. This report mentions the Scientific Working Groups and their role in forensic science. The history of imaging technology (photography) can be said to extend back to the times of Chinese philosopher Mo-Ti (470-390 B.C.) who described the principles behind the precursor to the camera obscura. Since that time, advances in imaging technology include the discovery of chemical photographic processes in the 19th century and the use of electronic imaging technology that includes analog video cameras and digital video and still cameras. By the mid 1990s, it was apparent that technologically advanced camera systems such as these were being adopted for use in the criminal justice system. This led the FBI to convene a meeting of individuals working in the field of forensic imaging from federal, state, local, and foreign law enforcement, and the U.S. military, during the summer of 1997. As a result of this meeting, the Technical Working Group on Imaging Technology was formed from a core group of the meeting’s participants. This group later became the Scientific Working Group on Imaging Technology (SWGIT). Prior to the inception of SWGIT, some law enforcement agencies began adopting digital imaging technology. Due to the lack of guidelines or standards, some of these agencies attempted to replace all their film cameras with substandard digital cameras, only to find that the equipment they had purchased was not capable of accomplishing the mission for which they were intended. At that time only low resolution digital cameras were deemed affordable by some law enforcement agencies. Some of these agencies were forced to rethink their photography procedures and reverted to the use of film cameras or replaced their low-resolution digital cameras with higher quality, more expensive equipment. Also lacking at this early stage was guidance on how to store and archive digital image files. When SWGIT was formed, it was tasked with providing guidance to law enforcement and others in the criminal justice system by releasing documents that describe the best practices and guidelines for the use of imaging technology, to include these concerns and many others. This group was terminated in 2015. == SWGIT Function == During its existence, SWGIT provided information on the appropriate use of various imaging technologies including both established and new. This was accomplished through the release of documents such as the SWGIT Best Practices documents. As changes in technology occurred, these documents were updated. Over the course of its existence, SWGIT collaborated with other Scientific Working Groups to address imaging concerns within their respective disciplines. SWGIT published over 20 documents that dealt specifically with imaging technology. SWGIT also co-published documents with the Scientific Working Group on Digital Evidence (SWGDE) that had a component or components dealing with imaging technology. SWGIT also provided imaging technology guidance and input for documents from the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group for Forensic Document Examination (SWGDOC), and the Scientific Working Group on Shoeprint and Tire Tread Evidence (SWGTREAD). SWGIT assisted the American Society of Crime Lab Directors/Laboratory Accreditation Board (ASCLD/LAB) in the writing of definitions and standards for the accreditation of Digital and Multimedia Evidence sections of crime laboratories. In addition to releasing documents, SWGIT members disseminated best practices for law enforcement professionals where imaging technology was concerned. This was carried out by attending and lecturing at meetings and conferences of various forensic organizations that included: The American Academy of Forensic Sciences (AAFS) The International Association for Identification (IAI) The Law Enforcement and Emergency Services Video Association (LEVA) The American Society of Crime Lab Directors (ASCLD) The SWGIT membership consisted of approximately fifty scientists, photographers, instructors, and managers from more than two dozen federal, state, and local law enforcement agencies, as well as from the academic and research communities. The membership elected its officers from within. SWGIT was composed of the Executive Committee, four standing subcommittees, and ad hoc subcommittees appointed on an as-needed basis. The standing subcommittees were: Image Analysis, Forensic Photography, Video, and Outreach. This group was terminated in 2015. == Legal Proceedings == The following court cases have conducted Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579 (1993) hearings in which SWGIT best practice documents have been cited as accepted protocol, methodology, and as generally accepted techniques in the forensic community: U. S. v. Rudy Frabizio, U.S. District Court, Boston, MA, 2008 (Image Authentication) U.S. v. Nobumochi Furukawa, U.S. District Court, Minnesota, 2007 (Video Authentication) U.S. v. John Stroman, U.S. District Court, South Carolina, 2007 (Facial Comparison Analysis) State of Texas v. Daniel Day, Tarrant County Texas, 2005 (Camera Identification to Images) U.S. v. Marc Watzman, U.S. District Court, Northern Illinois, 2004 (Video Authentication) U.S. v. McKreith, U.S. District Court, Fort Lauderdale, FL, 2002 (Photo comparison of shirt) == Termination == This group was unfunded by the FBI in 2015.

  Read more →
• 

  Psychology in cybersecurity

  The psychology of cybersecurity (often intersecting with usable security and cyberpsychology) is an interdisciplinary field studying how human behavior, cognitive biases, and social dynamics influence information security. While traditional cybersecurity focuses on hardware and software vulnerabilities, this discipline addresses the "human factor," which is exploited in cyberattacks. Psychology in cybersecurity draws from cognitive psychology and human–computer interaction. == History and evolution == The challenge of human behavior in computing was noted as early as the 1960s with multi-user mainframes like the Compatible Time-Sharing System (CTSS). In 1966, a software error on CTSS caused the system's master password file to be displayed to every user upon login—one of the earliest documented security incidents attributable to a combination of system design and human factors. These behaviors gained broader significance in the 1990s as the Internet became widely accessible. High-profile incidents involving figures like Kevin Mitnick demonstrated how human trust could be exploited through social engineering such as pretexting over the phone. == Cognitive and behavioral factors == Much of the psychology of cybersecurity focuses on decision-making under stress or uncertainty. Researchers apply frameworks like dual process theory to explain why humans fall for phishing or business email compromise. Threat actors design malicious communications to trigger fast, emotional "System 1" thinking—using urgency, authority, or panic, which prompts users to click a link or wire funds before their analytical "System 2" can assess the situation's legitimacy. Industry research has consistently documented the effectiveness of these techniques at scale, pointing to several recurring psychological phenomena that influence daily security practices: Cognitive biases: The optimism bias leads users to believe they are unlikely to be targeted by cybercriminals, resulting in lax password practices or delayed software updates. The availability heuristic causes individuals to focus on highly publicized, sophisticated threats while ignoring common, statistically probable risks like credential reuse. Social influence: Attackers leverage established principles of persuasion, such as those categorized by Robert Cialdini. Impersonating a CEO leverages the psychological trigger of authority, while fake tech support scams use reciprocity (offering to fix a problem before asking for network credentials). == Neurological and pre-cognitive factors == Functional magnetic resonance imaging (fMRI) studies show that neural activation in visual and attentional regions decreases with repeated exposure to the same stimulus, a phenomenon termed repetition suppression. Experiments have confirmed this effect in the context of security warnings: static warning designs produce declines in user attention and adherence. Information processing research on phishing indicates that affective cues, such as artificial urgency or fear, increase cognitive load and elicit automatic heuristic processing, reducing the likelihood of analytical evaluation and facilitating compliance with malicious requests. == Security fatigue and organizational dynamics == Aggressive cybersecurity postures can sometimes lead to mental and emotional exhaustion, a phenomenon known as security fatigue. === Alert fatigue === One example is alert fatigue, which most frequently affects both end-users and security operations center analysts. Continuous exposure to browser warnings or antivirus pop-ups, particularly those that are false positives, conditions users to dismiss alerts automatically due to the volume of notifications rather than their repetitive appearance (see § Neurological and pre-cognitive factors). The scale of this problem is significant in enterprise: SOC teams in large organizations receive thousands of alerts daily, and a survey published in ACM Computer Surveys found that analysts spend over 25% of their time handling false positives, meaning that malicious indicators can be buried in the noise. === Password fatigue === Similarly, password fatigue is the feeling experienced by many people who are required to remember an excessive number of passwords as part of their daily routine, such as to log in to a computer at work. Users cope with the memory burden by making predictable, iterative changes to their passwords (such as updating "Password01!" to "Password02!"), which decreases password security.

  Read more →
• 

  Per-pixel lighting

  In computer graphics, per-pixel lighting refers to any technique for lighting an image or scene that calculates illumination for each pixel on a rendered image. This is in contrast to other popular methods of lighting such as vertex lighting, which calculates illumination at each vertex of a 3D model and then interpolates the resulting values over the model's faces to calculate the final per-pixel color values. Per-pixel lighting is commonly used with techniques, such as blending, alpha blending, alpha to coverage, anti-aliasing, texture filtering, clipping, hidden-surface determination, Z-buffering, stencil buffering, shading, mipmapping, normal mapping, bump mapping, displacement mapping, parallax mapping, shadow mapping, specular mapping, shadow volumes, high-dynamic-range rendering, ambient occlusion (screen space ambient occlusion, screen space directional occlusion, ray-traced ambient occlusion), ray tracing, global illumination, and tessellation. Each of these techniques provides some additional data about the surface being lit or the scene and light sources that contributes to the final look and feel of the surface. Most modern video game engines implement lighting using per-pixel techniques instead of vertex lighting to achieve increased detail and realism. The id Tech 4 engine, used to develop such games as Brink and Doom 3, was one of the first game engines to implement a completely per-pixel shading engine. All versions of the CryENGINE, Frostbite Engine, and Unreal Engine, among others, also implement per-pixel shading techniques. Deferred shading is a recent development in per-pixel lighting notable for its use in the Frostbite Engine and Battlefield 3. Deferred shading techniques are capable of rendering potentially large numbers of small lights inexpensively (other per-pixel lighting approaches require full-screen calculations for each light in a scene, regardless of size). == History == While only recently have personal computers and video hardware become powerful enough to perform full per-pixel shading in real-time applications such as games, many of the core concepts used in per-pixel lighting models have existed for decades. Frank Crow published a paper describing the theory of shadow volumes in 1977. This technique uses the stencil buffer to specify areas of the screen that correspond to surfaces that lie in a "shadow volume", or a shape representing a volume of space eclipsed from a light source by some object. These shadowed areas are typically shaded after the scene is rendered to buffers by storing shadowed areas with the stencil buffer. Jim Blinn first introduced the idea of normal mapping in a 1978 SIGGRAPH paper. Blinn pointed out that the earlier idea of unlit texture mapping proposed by Edwin Catmull was unrealistic for simulating rough surfaces. Instead of mapping a texture onto an object to simulate roughness, Blinn proposed a method of calculating the degree of lighting a point on a surface should receive based on an established "perturbation" of the normals across the surface. == Hardware rendering == Real-time applications, such as video games, usually implement per-pixel lighting through the use of pixel shaders, allowing the GPU hardware to process the effect. The scene to be rendered is first rasterized onto a number of buffers storing different types of data to be used in rendering the scene, such as depth, normal direction, and diffuse color. Then, the data is passed into a shader and used to compute the final appearance of the scene, pixel-by-pixel. Deferred shading is a per-pixel shading technique that has recently become feasible for games. With deferred shading, a "g-buffer" is used to store all terms needed to shade a final scene on the pixel level. The format of this data varies from application to application depending on the desired effect, and can include normal data, positional data, specular data, diffuse data, emissive maps and albedo, among others. Using multiple render targets, all of this data can be rendered to the g-buffer with a single pass, and a shader can calculate the final color of each pixel based on the data from the g-buffer in a final "deferred pass". Because deferred shading assumes only one visible fragment per pixel sample, transparent objects are generally handled in a separate forward pass. == Software rendering == Per-pixel lighting is also performed in software on many high-end commercial rendering applications which typically do not render at interactive framerates. This is called offline rendering or software rendering. NVidia's mental ray rendering software, which is integrated with such suites as Autodesk's Softimage is a well-known example.

  Read more →
• 

  List of monochrome and RGB color formats

  This list of monochrome and RGB palettes includes generic repertoires of colors (color palettes) to produce black-and-white and RGB color pictures by a computer's display hardware. RGB is the most common method to produce colors for displays; so these complete RGB color repertoires have every possible combination of R-G-B triplets within any given maximum number of levels per component. Each palette is represented by a series of color patches. When the number of colors is low, a 1-pixel-size version of the palette appears below it, for easily comparing relative palette sizes. Huge palettes are given directly in one-color-per-pixel color patches. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 256-level grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet, and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. These images are not necessarily representative of how the image would be displayed on the original graphics hardware, as the hardware may have additional limitations regarding the maximum display resolution, pixel aspect ratio and color placement. Implementation of these formats is specific to each machine. Therefore, the number of colors that can be simultaneously displayed in a given text or graphic mode might be different. Also, the actual displayed colors are subject to the output format used - PAL or NTSC, composite or component video, etc. - and might be slightly different. For simulated images and specific hardware and alternate methods to produce colors other than RGB (ex: composite), see the List of 8-bit computer hardware palettes, the List of 16-bit computer hardware palettes and the List of video game console palettes. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit color depth displays, see the List of software palettes. == Monochrome palettes == These palettes only have some shades of gray, from black to white (considered the darkest and lightest "grays", respectively). The general rule is that those palettes have 2n different shades of gray, where n is the number of bits needed to represent a single pixel. === Monochrome (1-bit grayscale) === Monochrome graphics displays typically have a black background with a white or light gray image, though green and amber monochrome monitors were also common. Such a palette requires only one bit per pixel. Where photo-realism was desired, these early computer systems had a heavy reliance on dithering to make up for the limits of the technology. In some systems, as Hercules and CGA graphic cards for the IBM PC, a bit value of 1 represents white pixels (light on) and a value of 0 the black ones (light off); others, like the Playdate and Atari ST and Apple Macintosh with monochrome monitors, a bit value of 0 means a white pixel (no ink) and a value of 1 means a black pixel (dot of ink), which it approximates to the printing logic. === 2-bit Grayscale === In a 2-bit color palette each pixel's value is represented by 2 bits resulting in a 4-value palette (22 = 4). 2-bit dithering: It has black, white and two intermediate levels of gray as follows: A monochrome 2-bit palette is used on: The Monochrome Display Adapter for the IBM PC NeXT Computer, NeXTcube and NeXTstation monochrome graphic displays. Original Game Boy system portable video game console. Macintosh PowerBook 150 monochrome LC displays. Amiga with A2024 monochrome monitor in high-resolution mode. The original Amazon Kindle The original WonderSwan The Tiger Electronics Game.com portable video game console The original Neo Geo Pocket. === 4-bit Grayscale === In a 4-bit color palette each pixel's value is represented by 4 bits resulting in a 16-value palette (24 = 16): 4-bit grayscale dithering does a fairly good job of reducing visible banding of the level changes: A monochrome 4-bit palette is used on: MOS Technology VDC (on the Commodore 128 with monochrome monitor) Amstrad CPC series with a GT64/GT65 Green Monitor (16 unique green shades) Amstrad CPC Plus series with the MM12 Monochrome monitor (16 shades of grey) Some Apple PowerBooks equipped with monochrome displays like the PowerBook 5300 The original VideoNow === 8-bit Grayscale === In an 8-bit color palette each pixel's value is represented by 8 bits resulting in a 256-value palette (28 = 256). This is usually the maximum number of grays in ordinary monochrome systems; each image pixel occupies a single memory byte. Most scanners can capture images in 8-bit grayscale, and image file formats like TIFF and JPEG natively support this monochrome palette size. Alpha channels employed for video overlay also use (conceptually) this palette. The gray level indicates the opacity of the blended image pixel over the background image pixel. == Dichrome palettes == === 16-bit RG palette === The RG or red–green color space is a color space that uses only two primary colors: red and green. It was used on early color processes for films. It was used as an additive format, similar to the RGB color model but without a blue channel, on processes such as Kinemacolor, Prizma, Technicolor I, Raycol, etc., producing shades of black, red, green and yellow. Alternatively, it was used as a subtractive format on Brewster Color I, Kodachrome I, Prizma II, Technicolor II, etc., producing shades of transparent, red, green and black. Until recently, its primary use was in low-cost light-emitting diode displays in which red and green tended to be far more common than the still nascent blue LED technology, but full-color LEDs with blue have become more common in recent years. ColorCode 3-D, a anaglyph stereoscopic color scheme, uses the RG color space to simulate a broad spectrum of color in one eye, while the blue portion of the spectrum transmits a black-and-white (black-and-blue) image to the other eye to give depth perception. === 16-bit RB palette === === 16-bit GB palette === == Regular RGB palettes == Here are grouped those full RGB hardware palettes that have the same number of binary levels (i.e., the same number of bits) for every red, green and blue components using the full RGB color model. Thus, the total number of colors are always the number of possible levels by component, n, raised to a power of 3: n×n×n = n3. === 3-bit RGB === 3-bit RGB dithering: Systems with a 3-bit RGB palette use 1 bit for each of the red, green and blue color components. That is, each component is either "on" or "off" with no intermediate states. This results in an 8-color palette ((21)3 = 23 = 8) that has black, white, the three RGB primary colors red, green and blue and their correspondent complementary colors cyan, magenta and yellow as follows: The color indices vary between implementations; therefore, index numbers are not given. The 3-bit RGB palette is used by: Text terminals following the ECMA-48 standard (sometimes known as the "ANSI standard", although ANSI X3.128 does not define colors) World System Teletext Level 1/1.5 Videotex Oric computers BBC Micro PC-8801 (up to the MkII) PC-9801 (with original 8086 CPU, before the VM/VX models) Sharp X1 (models before the X1 Turbo Z) Sharp MZ 700 FM-7, FM New 7, FM 77 (before the FM77AV) Sinclair QL Space Invaders Part II (arcade hardware) Macintosh SE (with a color printer or external monitor) Atari 2600 (SECAM version) Color Maximite (PIC32 based microcomputer) Arcadia 2001 PV-1000 Monkey Magic (arcade hardware) VIC-20 (high-res mode) Mouse Trap (arcade hardware) Sanyo MBC-550 series Windows 1.0 (includes dithering) === 6-bit RGB === Systems with a 6-bit RGB palette use 2 bits for each of the red, green, and blue color components. This results in a (22)3 = 43 = 64-color palette as follows: 6-bit RGB systems include the following: Enhanced Graphics Adapter (EGA) for IBM PC/AT (16 colors at once) Sega Master System video game console (32 colors at once) GIME for TRS-80 Color Computer 3 (16 colors at once) Pebble Time smartwatch which has a 6-bit (64 color) e-paper display Parallax Propeller using the reference VGA circuit === 9-bit RGB === Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (23)3 = 83 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega Nomad TurboGrafx-16 (NEC PC-Engine) ZX Spectrum Next The NEC PC-88

  Read more →
• 

  NIS2 Directive

  The Directive (EU) 2022/2555, commonly known as NIS2 is a directive of the European Union aimed at protecting digital infrastructure, in particular critical infrastructure. It broadened the sectors covered by EU network and information security rules and updated incident reporting and oversight compared to the NIS1. Member States were required to transpose NIS2 by 17 October 2024, and the earlier NIS Directive was repealed on 18 October 2024. Only 23 Member States have fully implemented the measures contained with the NIS Directive. Infringement proceedings against them to enforce the Directive have not taken place, and they are not expected to take place in the near future. This failed implementation has led to the fragmentation of cybersecurity capabilities across the EU, with differing standards, incident reporting requirements and enforcement requirements being implemented in different Member States. From the EFTA countries (to April 2026) only Liechtenstein has fully transposed the NIS2 Directive. While the EFTA commission is conducting preparations to transpose the directive into its legislation. == National implementations == === Czech Republic === It is implemented through the Act No. 264/2025 Coll. also called Zákon o kybernetické bezpečnosti (Cybersecurity law) and through another five implementing regulations. The transposing legislation came into force on November 1st, 2025. === Germany === It is implemented through the Gesetz zur Umsetzung der NIS-2-Richtlinie und zur Regelung wesentlicher Grundzüge des Informationssicherheitsmanagements in der Bundesverwaltung. === Ireland === It is implemented through the National Cyber Security Bill. === The Netherlands === It is implemented through the Cyberbeveiligingswet (Cbw). === Slovakia === It is implemented through via an amendment of the Act No. 69/2018 Coll. also called Zákon o kybernetickej bezpečnosti a o zmene a doplnení niektorých zákonov (Law on Cybersecurity and change and amendment of certain laws). It came into force on November 1st, 2025. === Spain === It is implemented through the Esquema Nacional de Seguridad (ENS).

  Read more →
• 

  Supertoroid

  In geometry and computer graphics, a supertoroid or supertorus is usually understood to be a family of doughnut-like surfaces (technically, a topological torus) whose shape is defined by mathematical formulas similar to those that define the superellipsoids. The plural of "supertorus" is either supertori or supertoruses. The family was described and named by Alan Barr in 1994. Barr's supertoroids have been fairly popular in computer graphics as a convenient model for many objects, such as smooth frames for rectangular things. One quarter of a supertoroid can provide a smooth and seamless 90-degree joint between two superquadric cylinders. However, they are not algebraic surfaces (except in special cases). == Formulas == Alan Barr's supertoroids are defined by parametric equations similar to the trigonometric equations of the torus, except that the sine and cosine terms are raised to arbitrary powers. Namely, the generic point P(u, v) of the surface is given by P ( u , v ) = ( X ( u , v ) Y ( u , v ) Z ( u , v ) ) = ( ( a + C u s ) C v t ( b + C u s ) S v t S u s ) {\displaystyle P(u,v)=\left({\begin{array}{c}X(u,v)\\Y(u,v)\\Z(u,v)\end{array}}\right)=\left({\begin{array}{c}(a+C_{u}^{s})C_{v}^{t}\\(b+C_{u}^{s})S_{v}^{t}\\S_{u}^{s}\end{array}}\right)} where C θ ε = sgn ⁡ ( cos ⁡ θ ) | cos ⁡ θ | ε , S θ ε = sgn ⁡ ( sin ⁡ θ ) | sin ⁡ θ | ε , {\displaystyle {\begin{aligned}C_{\theta }^{\varepsilon }&=\operatorname {sgn} (\cos \theta )\,\left|\,\cos \theta \,\right|^{\varepsilon },\\S_{\theta }^{\varepsilon }&=\operatorname {sgn} (\sin \theta )\ \left|\,\sin \theta \ \right|^{\varepsilon },\end{aligned}}} sgn is the sign function, and the parameters u, v range from 0 to 360 degrees (0 to 2π radians). In these formulas, the parameter s > 0 controls the "squareness" of the vertical sections, t > 0 controls the squareness of the horizontal sections, and a, b ≥ 1 are the major radii in the x and y directions. With s = t = 1 and a = b = R one obtains the ordinary torus with major radius R and minor radius 1, with the center at the origin and rotational symmetry about the z-axis. In general, the supertorus defined as above spans the intervals: − ( a + 1 ) ≤ x ≤ + ( a + 1 ) − ( b + 1 ) ≤ y ≤ + ( b + 1 ) − 1 ≤ z ≤ + 1 {\displaystyle {\begin{array}{rcccl}-(a+1)&\leq &x&\leq &+(a+1)\\[4pt]-(b+1)&\leq &y&\leq &+(b+1)\\[4pt]-1&\leq &z&\leq &+1\end{array}}} The whole shape is symmetric about the planes x = 0, y = 0, and z = 0. The hole runs in the z direction and spans the intervals − ( a − 1 ) ≤ x ≤ + ( a − 1 ) − ( b − 1 ) ≤ y ≤ + ( b − 1 ) − ∞ ≤ z ≤ + ∞ {\displaystyle {\begin{array}{rcccl}-(a-1)&\leq &x&\leq &+(a-1)\\[4pt]-(b-1)&\leq &y&\leq &+(b-1)\\[4pt]-\infty &\leq &z&\leq &+\infty \end{array}}} A curve of constant u on this surface is a horizontal Lamé curve with exponent ⁠ 2 t , {\displaystyle {\tfrac {2}{t}},} ⁠ scaled in x and y and displaced in z. A curve of constant v, projected on the plane x = 0 or y = 0, is a Lamé curve with exponent ⁠ 2 s , {\displaystyle {\tfrac {2}{s}},} ⁠ scaled and horizontally shifted. If v = 0, the curve is planar and spans the intervals: a − 1 ≤ x ≤ a + 1 − 1 ≤ z ≤ + 1 {\displaystyle {\begin{array}{rcccl}a-1&\leq &x&\leq &a+1\\[4pt]-1&\leq &z&\leq &+1\end{array}}} and similarly if v = 90°, 180°, 270°. The curve is also planar if a = b. In general, if a ≠ b and v is not a multiple of 90 degrees, the curve of constant v will not be planar; and, conversely, a vertical plane section of the supertorus will not be a Lamé curve. The basic supertoroid shape defined above is often modified by non-uniform scaling to yield supertoroids of specific width, length, and vertical thickness. == Plotting code == The following GNU Octave code generates plots of a supertorus:

  Read more →
• 

  Truth discovery

  Truth discovery (also known as truth finding) is the process of choosing the actual true value for a data item when different data sources provide conflicting information on it. Several algorithms have been proposed to tackle this problem, ranging from simple methods like majority voting to more complex ones able to estimate the trustworthiness of data sources. Truth discovery problems can be divided into two sub-classes: single-truth and multi-truth. In the first case only one true value is allowed for a data item (e.g birthday of a person, capital city of a country). While in the second case multiple true values are allowed (e.g. cast of a movie, authors of a book). Typically, truth discovery is the last step of a data integration pipeline, when the schemas of different data sources have been unified and the records referring to the same data item have been detected. == General principles == The abundance of data available on the web makes more and more probable to find that different sources provide (partially or completely) different values for the same data item. This, together with the fact that we are increasing our reliance on data to derive important decisions, motivates the need of developing good truth discovery algorithms. Many currently available methods rely on a voting strategy to define the true value of a data item. Nevertheless, recent studies, have shown that, if we rely only on majority voting, we could get wrong results even in 30% of the data items. The solution to this problem is to assess the trustworthiness of the sources and give more importance to votes coming from trusted sources. Ideally, supervised learning techniques could be exploited to assign a reliability score to sources after hand-crafted labeling of the provided values; unfortunately, this is not feasible since the number of needed labeled examples should be proportional to the number of sources, and in many applications the number of sources can be prohibitive. == Single-truth vs multi-truth discovery == Single-truth and multi-truth discovery are two very different problems. Single-truth discovery is characterized by the following properties: only one true value is allowed for each data item; different values provided for a given data item oppose to each other; values and sources can either be correct or erroneous. While in the multi-truth case the following properties hold: the truth is composed by a set of values; different values could provide a partial truth; claiming one value for a given data item does not imply opposing to all the other values; the number of true values for each data item is not known a priori. Multi-truth discovery has unique features that make the problem more complex and should be taken into consideration when developing truth-discovery solutions. The examples below point out the main differences of the two methods. Knowing that in both examples the truth is provided by source 1, in the single truth case (first table) we can say that sources 2 and 3 oppose to the truth and as a result provide wrong values. On the other hand, in the second case (second table), sources 2 and 3 are neither correct nor erroneous, they instead provide a subset of the true values and at the same time they do not oppose the truth. == Source trustworthiness == The vast majority of truth discovery methods are based on a voting approach: each source votes for a value of a certain data item and, at the end, the value with the highest vote is select as the true one. In the more sophisticated methods, votes do not have the same weight for all the data sources, more importance is indeed given to votes coming from trusted sources. Source trustworthiness usually is not known a priori but estimated with an iterative approach. At each step of the truth discovery algorithm the trustworthiness score of each data source is refined, improving the assessment of the true values that in turn leads to a better estimation of the trustworthiness of the sources. This process usually ends when all the values reach a convergence state. Source trustworthiness can be based on different metrics, such as accuracy of provided values, copying values from other sources and domain coverage. Detecting copying behaviors is very important, in fact, copy allows to spread false values easily making truth discovery very hard, since many sources would vote for the wrong values. Usually systems decrease the weight of votes associated to copied values or even don’t count them at all. == Single-truth methods == Most of the currently available truth discovery methods have been designed to work well only in the single-truth case. Below are reported some of the characteristics of the most relevant typologies of single-truth methods and how different systems model source trustworthiness. === Majority voting === Majority voting is the simplest method, the most popular value is selected as the true one. Majority voting is commonly used as a baseline when assessing the performances of more complex methods. === Web-link based === These methods estimate source trustworthiness exploiting a similar technique to the one used to measure authority of web pages based on web links. The vote assigned to a value is computed as the sum of the trustworthiness of the sources that provide that particular value, while the trustworthiness of a source is computed as the sum of the votes assigned to the values that the source provides. === Information-retrieval based === These methods estimate source trustworthiness using similarity measures typically used in information retrieval. Source trustworthiness is computed as the cosine similarity (or other similarity measures) between the set of values provided by the source and the set of values considered true (either selected in a probabilistic way or obtained from a ground truth). === Bayesian based === These methods use Bayesian inference to define the probability of a value being true conditioned on the values provided by all the sources. P ( v ∣ ψ ( o ) ) = P ( ψ ( o ) ∣ v ) ⋅ P ( v ) P ( ψ ( o ) ) {\displaystyle P(v\mid \psi (o))={\frac {P(\psi (o)\mid v)\cdot P(v)}{P(\psi (o))}}} where v {\displaystyle \textstyle v} is a value provided for a data item o {\displaystyle \textstyle o} and ψ ( o ) {\displaystyle \textstyle \psi (o)} is the set of the observed values provided by all the sources for that specific data item. The trustworthiness of a source is then computed based on the accuracy of the values that provides. Other more complex methods exploit Bayesian inference to detect copying behaviors and use these insights to better assess source trustworthiness. == Multi-truth methods == Due to its complexity, less attention has been devoted to the study of the multi-truth discovery Below are reported two typologies of multi-truth methods and their characteristics. === Bayesian based === These methods use Bayesian inference to define the probability of a group of values being true conditioned on the values provided by all the data sources. In this case, since there could be multiple true values for each data item, and sources can provide multiple values for a single data item, it is not possible to consider values individually. An alternative is to consider mappings and relations between set of provided values and sources providing them. The trustworthiness of a source is then computed based on the accuracy of the values that provides. More sophisticated methods also consider domain coverage and copying behaviors to better estimate source trustworthiness. === Probabilistic Graphical Models based === These methods use probabilistic graphical models to automatically define the set of true values of given data item and also to assess source quality without need of any supervision. == Applications == Many real-world applications can benefit from the use of truth discovery algorithms. Typical domains of application include: healthcare, crowd/social sensing, crowdsourcing aggregation, information extraction and knowledge base construction. Truth discovery algorithms could be also used to revolutionize the way in which web pages are ranked in search engines, going from current methods based on link analysis like PageRank, to procedures that rank web pages based on the accuracy of the information they provide.

  Read more →
• 

  CityEngine

  ArcGIS CityEngine is a commercial 3D modeling program. Developed by Esri R&D Center Zurich (formerly Procedural Inc.), it specializes in the generation of 3D urban environments to support the creation of detailed large-scale 3D city models. Unlike traditional 3D modeling methodology, which uses computer-aided design (CAD) tools and techniques, CityEngine takes a procedural modeling approach which shapes generation via a rules-based system. Due to its integration with the wider ArcGIS platform, CityEngine can also be used with geographic information system (GIS) datasets. CityEngine can be used for urban planning and architecture, graphics visualization, game development, entertainment, and archeology. CityEngine can be used to visualize the building information modeling (BIM) data of buildings in a larger urban context, making for more realistic construction projects. == History and releases == === Software history === ArcGIS CityEngine, originally named Esri CityEngine, was developed at Swiss technology university ETH Zurich by Pascal Mueller, the co-founder and CEO of Procedural Inc. While researching for his PhD at the ETH Computer Vision Lab, Mueller invented a number of techniques for procedural modeling of 3D architecture that make up the foundation of CityEngine. CityEngine publically debuted at the 2001 SIGGRAPH conference; since then, additional research papers have been published that have contributed to CityEngine and its features. The first commercial version of CityEngine was released in 2008. In 2007, Procedural Inc. was founded and separated from ETH Zurich, the top-ranking technology university in Switzerland. In the summer of 2011, Procedural Inc. was acquired by Esri Inc., becoming Esri R&D Center Zurich. Esri CityEngine was renamed to ArcGIS CityEngine in June 2020 to offically make it a part of the ArcGIS software suite. === Releases === === Licensing and pricing === ArcGIS CityEngine is included in the Professional and Professional Plus tiers of ArcGIS Online. Pricing may vary by region and distributors. In the US, the professional tier costs US$2,200 per year; in the UK, it is £4,200 per year (excluding VAT). CityEngine can be purchased elsewhere via a local Esri partner. . Once purchased, users can download and obtain license details from the MyEsri portal. == Features == CGA (computer generated architecture) parametric modeling rules to control mass, geometry assets, proportions, or texturing of buildings or streets on a citywide scale Select a target location and import geo-referenced satellite imagery and 3D terrain of the location to more quickly build accurate urban environments through OpenStreetMap integration Interactively control specific street or building parameters, such as height or age Import/export geo-spatial/vector data with industry-standard formats such as Esri Shapefile, File Geodatabase, and OpenStreetMap, as well as file formats for WebGL, KMZ, Collada, Autodesk FBX, Autodesk Maya, 3DS, Wavefront OBJ, RenderMan RIB, Alembic, e-on software's Vue, Universal Scene Description USD, Khronos Group GLTF, Unreal Engine, and Unreal Datasmith Script and generate rules-based reports to show socioeconomic figures (e.g., Gross Floor Area (GFA) and Floor Area Ratio (FAR)) to analyze their urban design proposals. VR viewing of modeled environments with Samsung Gear VR Use a variety of materials through the Esri materials library == Procedural modeling == ArcGIS CityEngine uses a procedural modeling approach to automatically generate models through a predefined rule set. The rules are defined through a CGA shape grammar system, enabling the creation of complex parametric models. Users can change or add the shape grammar as needed. Urban environments can be modeled within CityEngine by starting with creating a street network (either from the street drawing tool or with data imported from map data). Then, lots may be subdivided as many times as specified, resulting in a map of multiple lots and streets. CityEngine can then be instructed to start generating the buildings using defined procedural modeling rules. At this point, the city model can be re-designed and adjusted by changing the parameters or the shape grammar. === Geodesign === Though CityEngine is not an analytical tool like GIS, discussions about geodesign often mention the use of ArcGIS CityEngine. As it can be used to enhance 3D shape generation in ArcGIS, ArcGIS CityEngine is a critical product to improve the applicability of geodesign by using geospatial information to design or analyze a city. == Applications == === Urban design and planning === Garsdale Design used ArcGIS CityEngine in the creation of city master plans in Iraq before 2013, both to model existing historic areas and also model future plans. Larger companies like Foster+Partners and HOK Architects have also used CityEngine in their urban planning projects. === Urban and environmental studies === Because its primary feature is building informative city models, some urban researchers use CityEngine to compare land-use planning schemes, for example in very dense global cities such as Hong Kong and Seoul. Environmental scientists can also utilize the instant 3D model generation in CityEngine, which can make for more convenient informative research than modeling a city by creating each building individually. === Game development === CityEngine can be used as a tool in the creation of video games that require detailed 3D environments to assign interactive scripts. === Movie industry === Zootopia (also known outside of the US as Zootopolis), which won the 2016 Academy Award for Best Animated Feature Film, used CityEngine to model the city in its movie. multi-scaling city, the designers used CityEngine due to its rule-based system. CityEngine was also used to create Big Hero 6's San-Fransokyo. === Military === Due to its integration with the Esri product suite and its ability to process geospatial data to create 3D scenes/maps, CityEngine can be used within military/defense organizations. == List of movies and TV shows using CityEngine == Studios and companies rarely state what software they use in their pipelines. When CityEngine is mentioned as a tool in production, it's often in a small reference in a larger article. Movies only claimed to use CityEngine by a single Esri employee Presented at FMX 2025 workshop == Ports == ArcGIS CityEngine is built on top of Eclipse IDE, and has therefore able to be used on Windows and Linux operating systems. Support for macOS was stopped in March 2021. == Plugins and extensions == ArcGIS CityEngine currently works with a number of third party 3D modeling, rendering, and analytical software products via its SDK and API; these currently are: ArcGIS CityEngine for ArcGIS Urban: ArcGIS Urban Suite Puma: ArcGIS CityEngine for Rhinoceros 3D Palladio: ArcGIS CityEngine for Houdini Serlio: ArcGIS CityEngine for Maya PyPRT: ArcGIS CityEngine for Python ArcGIS CityEngine provides a Python scripting interface built on Jython (current version 2.7.0) which allows users to create their own tools and functionality. == Publications ==

  Read more →
• 

  Plum Voice

  The Plum Group, Inc. (DBA Plum Voice) is a company. Plum is headquartered in New York City with offices in Boston and Denver. == History == Plum Voice, founded in 2000 as The Plum Group, Inc., was incorporated to create technologies for personalized audio communication. By 2001, Plum had commercialized the open-standard Plum VoiceXML IVR platform which facilitated the creation of dynamic telecom applications. 2001 - Commercial launch of Plum VoiceXML IVR platform for customer-premises deployment 2002 - Launch of Plum Voice Hosting Centers for 24x7x365 managed IVR hosting 2004 - Plum Voice application suite receives a "Product of the Year" award from Customer Interactions magazine 2008 - Plum Survey builder launched, a do-it-yourself IVR survey tool. 2010 - Plum launched QuickFuse, a web-based rapid development platform used to create voice applications. 2013 - Plum launched VoiceTrends, an analytics and reporting toolkit designed specifically for voice applications. Plum achieves PCI-DSS Level 1. 2015 - Plum launched Plum Insight, a multi-channel (voice, web, mobile) survey platform. Plum achieves HIPAA compliance. 2016 - Plum launched a new version of QuickFuse called Fuse+. 2020 - Plum sunsets QuickFuse, rebrands Fuse+ as Plum Fuse.

  Read more →
• 

  Ware report

  Security Controls for Computer Systems, commonly called the Ware report, is a 1970 text by Willis Ware that was foundational in the field of computer security. == Development == A defense contractor in St. Louis, Missouri, had bought an IBM mainframe computer, which it was using for classified work on a fighter aircraft. To provide additional income, the contractor asked the Department of Defense (DoD) for permission to sell computer time on the mainframe to local businesses via remote terminals, while the classified work continued. At the time, the DoD did not have a policy to cover this. The DoD's Advanced Research Projects Agency (DARPA) asked Ware - a RAND employee - to chair a committee to examine and report on the feasibility of security controls for computer systems. The committee's report was a classified document given in January 1970 to the Defense Science Board (DSB), which had taken over the project from ARPA. After declassification, the report was published by RAND in October 1979. == Influence == The IEEE Computer Society said the report was widely circulated, and the IEEE Annals of the History of Computing said that it, together with Ware's 1967 Spring Joint Computer Conference session, marked the start of the field of computer security. The report influenced security certification standards and processes, especially in the banking and defense industries, where the report was instrumental in creating the Orange Book.

  Read more →
• 

  VOCEDplus

  VOCEDplus is a free international research database about tertiary education, maintained and developed by staff at the c (NCVER) in Adelaide, South Australia. The focus of the database content is the relation of post-compulsory education and training to workforce needs, skills development, and social inclusion. == Structure == The content of the VOCEDplus database encompasses vocational education and training (VET), higher education, lifelong learning, informal learning, VET in schools, adult and community education, apprenticeships/traineeships, international education, providers of education and training, and workforce development. It is international in scope and contains over 84,000 English language records, many with links to full text documents. VOCEDplus contains extensive Australian materials and includes a wide range of international information, covering outcomes of tertiary education in the shape of published research, practice, policy, and statistics. Entries are included for the following types of publications: reports; annual reports; papers; discussion papers; occasional papers; working papers; books; book chapters; conference papers; conference proceedings; journals; journal articles; policy documents; published statistics; theses; podcasts; and teaching and training materials. Each database entry contains standard bibliographic information and an abstract. Many entries include full text access via the publisher's website or a digitised copy. == History == === 1989-1997 === In the early years VOCEDplus was known as VOCED. The original database was produced by a network of clearinghouses across Australia with the aim of sharing activities in the technical and further education (TAFE) sector. VOCED was produced in hardcopy and an electronic version was distributed on diskette. === 1997-2001 === 1997 - the first web version of VOCED was made available from the National Centre for Vocational Education Research (NCVER) organisational website 1998 - a major project to upgrade the database and expand its international coverage commenced 2001 - creation of VOCED's own website 2001 - VOCED endorsed as the UNESCO international database for technical and vocational education and training (TVET) research information === 2001-2009 === Many changes to the database and website occurred during this period with a focus on continuous improvement to meet the needs of users and utilise emerging technologies. 2006 - materials produced for two adult literacy and learning programs funded by the Australian Department of Education, Employment and Workplace Relations (DEEWR) - the Workplace English Language and Learning (WELL) Programme and the Adult Literacy National Project (ALNP) included in VOCED 2007 - the Australian clearinghouse network transferred most of the hardcopy collections to NCVER, to form a centralised repository of resources 2009 - materials produced by Reframing the Future (RTF) a vocational education and training workforce development initiative of the Australian, State and Territory Governments included in VOCED === 2009-2014 === A major rebuild of the database and website was undertaken during this period to take advantage of the potential of new technologies to provide improved services and incorporate Web 2.0 technologies (RSS feeds, and share and bookmark tools). 2009 - scope expanded to more fully encompass the higher education sector 2011 - launch of VOCEDplus with the name change representing the enhanced features and extended focus 2012 - a major retrospective digitisation project commenced and by the end of the 2012-2013 financial year a total of 9,328 publications (593,534 pages/microfiche frames) had been digitised, ensuring these publications are available electronically for free === 2014-2019 === A number of significant curated content products were released during this period. 2015 - release of a refreshed look to adopt the new NCVER branding plus a number of search enhancements (Guided search, Expert search, and Glossary search) were added 2015 - first in the series of 'Focus on...' pages released 2016 - launch of the 'Pod Network', a convenient and efficient platform that allows instant access to research and a multitude of resources on a range of subjects 2017 - completion of the 'Pod Network', consisting of 20 Pods (on broad subjects including Apprenticeships and traineeships, Foundation skills, Teaching and learning, Career development, and Students) and 74 Podlets (on narrow topics including Online learning, Social media, VET in schools, STEM skills, and Adult literacy) 2018 - launch of the 'Timeline of Australian VET Policy Initiatives' and the 'VET Knowledge Bank' which contains a suite of products capturing Australia's diverse, complex and ever-changing VET system 2019 - after an internal review, a refreshed, streamlined version of the 'Pod Network' was released, consisting of 13 Pods and 20 Podlets 2019 - launch of the 'VET Practitioner Resource' which contains a range of information to support VET practitioners in their work and is organised into three sections: (1) Teaching, training and assessment: standards, guidance, research and good practice resources to inform daily work; (2) Practitioners as researchers: information for undertaking practitioner-led research; and (3) The VET workforce: information about VET teachers and trainers, and the professional development needs of the VET workforce 2019 - VOCEDplus celebrated 30 years of providing information to the tertiary education sector and the homepage was refreshed to make it more modern and easier to use === 2020- === VOCEDplus continued to be accessible throughout the COVID-19 pandemic. 2020-2021 - the VET Knowledge Bank added a dedicated page, 'COVID-19 announcements', that showcases the measures introduced by the Australian, state and territory governments to mitigate the impact of the pandemic and promote economic recovery 2020-2024 - published research about the effects of the pandemic on education and training, providers, students, labour markets, employment and employees was collected and made permanently available in the database 2024 - VOCEDplus celebrated 35 years of providing information to the tertiary education sector. The homepage was refreshed and a number of enhancements and new features were implemented including a new My Profile feature, improvements to My Selection, accessible search history and saved searches, enhanced search functionality, and improved navigation.

  Read more →
• 

  Database-as-IPC

  In computer programming, Database-as-IPC may be considered an anti-pattern where a disk persisted table in a database is used as the message queue store for routine inter-process communication (IPC) or subscribed data processing. If database performance is of concern, alternatives include sockets, network socket, or message queue. British computer scientist, Junade Ali, defined the Database-as-IPC Anti-Pattern as using a database to "schedule jobs or queue up tasks to be completed", noting that this anti-pattern centres around using a database for temporary messages instead of persistent data. == Controversy == The issue arises if there is a performance issue, and if additional systems (and servers) can be justified. In terms of performance, recent advancements in database systems provide more efficient mechanisms for signaling and messaging, and database systems also support memory (non-persisted) tables. There are databases with built-in notification mechanisms, such as PostgreSQL, SQL Server, and Oracle. These mechanisms and future improvements of database systems can make queuing much more efficient and avoid the need to set up a separate signaling or messaging queue system along with the server and management overhead. While MySQL doesn't have direct support for notifications, some workarounds are possible. However, they would be seen as non-standard and therefore more difficult to maintain.

  Read more →
• 

  Outline of machine learning

  The following outline is provided as an overview of, and topical guide to, machine learning: Machine learning (ML) is a subfield of artificial intelligence within computer science that evolved from the study of pattern recognition and computational learning theory. In 1959, Arthur Samuel defined machine learning as a "field of study that gives computers the ability to learn without being explicitly programmed". ML involves the study and construction of algorithms that can learn from and make predictions on data. These algorithms operate by building a model from a training set of example observations to make data-driven predictions or decisions expressed as outputs, rather than following strictly static program instructions. == How can machine learning be categorized? == An academic discipline A branch of science An applied science A subfield of computer science A branch of artificial intelligence A subfield of soft computing Application of statistics === Paradigms of machine learning === Supervised learning, where the model is trained on labeled data Unsupervised learning, where the model tries to identify patterns in unlabeled data Reinforcement learning, where the model learns to make decisions by receiving rewards or penalties. == Applications of machine learning == Applications of machine learning Bioinformatics Biomedical informatics Computer vision Customer relationship management Data mining Earth sciences Email filtering Inverted pendulum (balance and equilibrium system) Natural language processing Named Entity Recognition Automatic summarization Automatic taxonomy construction Dialog system Grammar checker Language recognition Handwriting recognition Optical character recognition Speech recognition Text to Speech Synthesis Speech Emotion Recognition Machine translation Question answering Speech synthesis Text mining Term frequency–inverse document frequency Text simplification Pattern recognition Facial recognition system Handwriting recognition Image recognition Optical character recognition Speech recognition Recommendation system Collaborative filtering Content-based filtering Hybrid recommender systems Search engine Search engine optimization Social engineering == Machine learning hardware == Graphics processing unit Tensor processing unit Vision processing unit == Machine learning tools == Comparison of machine learning software Comparison of deep learning software === Machine learning frameworks === ==== Proprietary machine learning frameworks ==== Amazon Machine Learning Microsoft Azure Machine Learning Studio DistBelief (replaced by TensorFlow) ==== Open source machine learning frameworks ==== Apache Singa Apache MXNet Caffe PyTorch mlpack TensorFlow Torch CNTK Accord.Net Jax MLJ.jl – A machine learning framework for Julia === Machine learning libraries === Deeplearning4j Theano scikit-learn Keras === Machine learning algorithms === == Machine learning methods == === Instance-based algorithm === K-nearest neighbors algorithm (KNN) Learning vector quantization (LVQ) Self-organizing map (SOM) === Regression analysis === Logistic regression Ordinary least squares regression (OLSR) Linear regression Stepwise regression Multivariate adaptive regression splines (MARS) Regularization algorithm Ridge regression Least Absolute Shrinkage and Selection Operator (LASSO) Elastic net Least-angle regression (LARS) Classifiers Probabilistic classifier Naive Bayes classifier Binary classifier Linear classifier Hierarchical classifier === Dimensionality reduction === Dimensionality reduction Canonical correlation analysis (CCA) Factor analysis Feature extraction Feature selection Independent component analysis (ICA) Linear discriminant analysis (LDA) Multidimensional scaling (MDS) Non-negative matrix factorization (NMF) Partial least squares regression (PLSR) Principal component analysis (PCA) Principal component regression (PCR) Projection pursuit Sammon mapping t-distributed stochastic neighbor embedding (t-SNE) === Ensemble learning === Ensemble learning AdaBoost Boosting Bootstrap aggregating (also "bagging" or "bootstrapping") Ensemble averaging Gradient boosted decision tree (GBDT) Gradient boosting Random Forest Stacked Generalization === Meta-learning === Meta-learning Inductive bias Metadata === Reinforcement learning === Reinforcement learning Q-learning State–action–reward–state–action (SARSA) Temporal difference learning (TD) Learning Automata === Supervised learning === Supervised learning Averaged one-dependence estimators (AODE) Artificial neural network Case-based reasoning Gaussian process regression Gene expression programming Group method of data handling (GMDH) Inductive logic programming Instance-based learning Lazy learning Learning Automata Learning Vector Quantization Logistic Model Tree Minimum message length (decision trees, decision graphs, etc.) Nearest Neighbor Algorithm Analogical modeling Probably approximately correct learning (PAC) learning Ripple down rules, a knowledge acquisition methodology Symbolic machine learning algorithms Support vector machines Random Forests Ensembles of classifiers Bootstrap aggregating (bagging) Boosting (meta-algorithm) Ordinal classification Conditional Random Field ANOVA Quadratic classifiers k-nearest neighbor Boosting SPRINT Bayesian networks Naive Bayes Hidden Markov models Hierarchical hidden Markov model ==== Bayesian ==== Bayesian statistics Bayesian knowledge base Naive Bayes Gaussian Naive Bayes Multinomial Naive Bayes Averaged One-Dependence Estimators (AODE) Bayesian Belief Network (BBN) Bayesian Network (BN) ==== Decision tree algorithms ==== Decision tree algorithm Decision tree Classification and regression tree (CART) Iterative Dichotomiser 3 (ID3) C4.5 algorithm C5.0 algorithm Chi-squared Automatic Interaction Detection (CHAID) Decision stump Conditional decision tree ID3 algorithm Random forest SLIQ ==== Linear classifier ==== Linear classifier Fisher's linear discriminant Linear regression Logistic regression Multinomial logistic regression Naive Bayes classifier Perceptron Support vector machine === Unsupervised learning === Unsupervised learning Expectation-maximization algorithm Vector Quantization Generative topographic map Information bottleneck method Association rule learning algorithms Apriori algorithm Eclat algorithm ==== Artificial neural networks ==== Artificial neural network Feedforward neural network Extreme learning machine Convolutional neural network Recurrent neural network Long short-term memory (LSTM) Logic learning machine Self-organizing map ==== Association rule learning ==== Association rule learning Apriori algorithm Eclat algorithm FP-growth algorithm ==== Hierarchical clustering ==== Hierarchical clustering Single-linkage clustering Conceptual clustering ==== Cluster analysis ==== Cluster analysis BIRCH DBSCAN Expectation–maximization (EM) Fuzzy clustering Hierarchical clustering k-means clustering k-medians Mean-shift OPTICS algorithm ==== Anomaly detection ==== Anomaly detection k-nearest neighbors algorithm (k-NN) Local outlier factor === Semi-supervised learning === Semi-supervised learning Active learning Generative models Low-density separation Graph-based methods Co-training Transduction === Deep learning === Deep learning Deep belief networks Deep Boltzmann machines Deep Convolutional neural networks Deep Recurrent neural networks Hierarchical temporal memory Generative Adversarial Network Style transfer Transformer Stacked Auto-Encoders === Other machine learning methods and problems === Anomaly detection Association rules Bias-variance dilemma Classification Multi-label classification Clustering Data Pre-processing Empirical risk minimization Feature engineering Feature learning Learning to rank Occam learning Online machine learning PAC learning Regression Reinforcement Learning Semi-supervised learning Statistical learning Structured prediction Graphical models Bayesian network Conditional random field (CRF) Hidden Markov model (HMM) Unsupervised learning VC theory == Machine learning research == List of artificial intelligence projects List of datasets for machine learning research == History of machine learning == History of machine learning Timeline of machine learning == Machine learning projects == Machine learning projects: DeepMind Google Brain OpenAI Meta AI Hugging Face == Machine learning organizations == === Machine learning conferences and workshops === Artificial Intelligence and Security (AISec) (co-located workshop with CCS) Conference on Neural Information Processing Systems (NIPS) ECML PKDD International Conference on Machine Learning (ICML) ML4ALL (Machine Learning For All) == Machine learning publications == === Books on machine learning === Mathematics for Machine Learning Hands-On Machine Learning Scikit-Learn, Keras, and TensorFlow The Hundred-Page Machine Learning Book === Machine learning journals === Machine Learning Journal of Machine Learning Research (JMLR) Neural Computation == Pe

  Read more →
• 

  Network eavesdropping

  Network eavesdropping, also known as eavesdropping attack, sniffing attack, or snooping attack, is a method that retrieves user information through the internet. This attack happens on electronic devices like computers and smartphones. This network attack typically happens under the usage of unsecured networks, such as public wifi connections or shared electronic devices. Eavesdropping attacks through the network is considered one of the most urgent threats in industries that rely on collecting and storing data. Internet users use eavesdropping via the Internet to improve information security. A typical network eavesdropper may be called a Black-hat hacker and is considered a low-level hacker as it is simple to network eavesdrop successfully. The threat of network eavesdroppers is a growing concern. Research and discussions are brought up in the public's eye, for instance, types of eavesdropping, open-source tools, and commercial tools to prevent eavesdropping. Models against network eavesdropping attempts are built and developed as privacy is increasingly valued. Sections on cases of successful network eavesdropping attempts and its laws and policies in the National Security Agency are mentioned. Some laws include the Electronic Communications Privacy Act and the Foreign Intelligence Surveillance Act. == Types of attacks == Types of network eavesdropping include intervening in the process of decryption of messages on communication systems, attempting to access documents stored in a network system, and listening on electronic devices. Types include electronic performance monitoring and control systems, keystroke logging, man-in-the-middle attacks, observing exit nodes on a network, and Skype & Type. === Electronic performance monitoring and control systems (EPMCSs) === Electronic performance monitoring and control systems are used by employees or companies and organizations to collect, store, analyze, and report actions or performances of employers when they are working. The beginning of this system is used to increase the efficiency of workers, but instances of unintentional eavesdropping can occur, for example, when employees' casual phone calls or conversations would be recorded. === Keystroke logging === Keystroke logging is a program that can oversee the writing process of the user. It can be used to analyze the user's typing activities, as keystroke logging provides detailed information on activities like typing speed, pausing, deletion of texts, and more behaviors. By monitoring the activities and sounds of the keyboard strikes, the message typed by the user can be translated. Although keystroke logging systems do not explain reasons for pauses or deletion of texts, it allows attackers to analyze text information. Keystroke logging can also be used with eye-tracking devices which monitor the movements of the user's eyes to determine patterns of the user's typing actions which can be used to explain the reasons for pauses or deletion of texts. === Man-in-the-middle attack (MitM) === A Man-in-the-middle attack is an active eavesdropping method that intrudes on the network system. It can retrieve and alter the information sent between two parties without anyone noticing. The attacker hijacks the communication systems and gains control over the transport of data, but cannot insert voice messages that sound or act like the actual users. Attackers also create independent communications through the system with the users acting as if the conversation between users is private. The "man-in-the-middle" can also be referred to as lurkers in a social context. A lurker is a person who rarely or never posts anything online, but the person stays online and observes other users' actions. Lurking can be valuable as it lets people gain knowledge from other users. However, like eavesdropping, lurking into other users' private information violates privacy and social norms. === Observing exit nodes === Distributed networks including communication networks are usually designed so that nodes can enter and exit the network freely. However, this poses a danger in which attacks can easily access the system and may cause serious consequences, for example, leakage of the user's phone number or credit card number. In many anonymous network pathways, the last node before exiting the network may contain actual information sent by users. Tor exit nodes are an example. Tor is an anonymous communication system that allows users to hide their IP addresses. It also has layers of encryption that protect information sent between users from eavesdropping attempts trying to observe the network traffic. However, Tor exit nodes are used to eavesdrop at the end of the network traffic. The last node in the network path flowing through the traffic, for instance, Tor exit nodes, can acquire original information or messages that were transmitted between different users. === Skype & Type (S&T) === Skype & Type (S&T) is a new keyboard acoustic eavesdropping attack that takes advantage of Voice-over IP (VoIP). S&T is practical and can be used in many applications in the real world, as it does not require attackers to be close to the victim and it can work with only some leaked keystrokes instead of every keystroke. With some knowledge of the victim's typing patterns, attackers can gain a 91.7% accuracy typed by the victim. Different recording devices including laptop microphones, smartphones, and headset microphones can be used for attackers to eavesdrop on the victim's style and speed of typing. It is especially dangerous when attackers know what language the victim is typing in. == Tools to prevent eavesdropping attacks == Computer programs where the source code of the system is shared with the public for free or for commercial use can be used to prevent network eavesdropping. They are often modified to cater to different network systems, and the tools are specific in what task it performs. In this case, Advanced Encryption Standard-256, Bro, Chaosreader, CommView, Firewalls, Security Agencies, Snort, Tcptrace, and Wireshark are tools that address network security and network eavesdropping. === Advanced encryption standard-256 (AES-256) === It is a cipher block chaining (CBC) mode for ciphered messages and hash-based message codes. The AES-256 contains 256 keys for identifying the actual user, and it represents the standard used for securing many layers on the internet. AES-256 is used by Zoom Phone apps that help encrypt chat messages sent by Zoom users. If this feature is used in the app, users will only see encrypted chats when they use the app, and notifications of an encrypted chat will be sent with no content involved. === Bro === Bro is a system that detects network attackers and abnormal traffic on the internet. It emerged at the University of California, Berkeley that detects invading network systems. The system does not apply to the detection of eavesdropping by default, but can be modified to an offline analyzing tool for eavesdropping attacks. Bro runs under Digital Unix, FreeBSD, IRIX, SunOS, and Solaris operating systems, with the implementation of approximately 22,000 lines of C++ and 1,900 lines of Bro. It is still in the process of development for real-world applications. === Chaosreader === Chaosreader is a simplified version of many open-source eavesdropping tools. It creates HTML pages on the content of when a network intrusion is detected. No actions are taken when an attack occurs and only information such as time, network location on which system or wall the user is trying to attack will be recorded. === CommView === CommView is specific to Windows systems which limits real-world applications because of its specific system usage. It captures network traffic and eavesdropping attempts by using packet analyzing and decoding. === Firewalls === Firewall technology filters network traffic and blocks malicious users from attacking the network system. It prevents users from intruding into private networks. Having a firewall in the entrance to a network system requires user authentications before allowing actions performed by users. There are different types of firewall technologies that can be applied to different types of networks. === Security agencies === A Secure Node Identification Agent is a mobile agent used to distinguish secure neighbor nodes and informs the Node Monitoring System (NMOA). The NMOA stays within nodes and monitors the energy exerted, and receives information about nodes including node ID, location, signal strength, hop counts, and more. It detects nodes nearby that are moving out of range by comparing signal strengths. The NMOA signals the Secure Node Identification Agent (SNIA) and updates each other on neighboring node information. The Node BlackBoard is a knowledge base that reads and updates the agents, acting as the brain of the security system. The Node Key Management agent is created when an encryption key is inserted to th

  Read more →
• 

  Tokken

  Tokken is a payment system and mobile app most known for being a legal and secure option for businesses transactions within the cannabis industry, because of its compliance with bank requirements. The startup company was created by Lamine Zarrad, a former regulator at the Office of the Comptroller of the Currency. == Operability == In order for a person to start using the app, they need to provide evidence, in the form of bioidentification data and mobile carrier records, that they can legally purchase weed. After they have been verified, customers can pay directly through the app at any dispensary that is using Tokken. Tokken turns credit card transactions into a digital token, which can be exchanged back for money that can later be deposited into a bank account. All transactions are logged publicly through a blockchain leger, making the process both anonymous and verified. === Banking services === Tokken has a "pay taxes" function which enables dispensaries to pay their taxes directly to the department.

  Read more →