AI Apply Reddit

AI Apply Reddit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Color vision

    Color vision

    Color vision (CV), a feature of visual perception, is an ability to perceive differences between light composed of different frequencies independently of light intensity. Color perception is a part of the larger visual system and is mediated by a complex process between neurons that begins with differential stimulation of different types of photoreceptors by light entering the eye. Those photoreceptors then emit outputs that are propagated through many layers of neurons ultimately leading to higher cognitive functions in the brain. Color vision is found in many animals and is mediated by similar underlying mechanisms with common types of biological molecules and a complex history of the evolution of color vision within different animal taxa. In primates, color vision may have evolved under selective pressure for a variety of visual tasks including the foraging for nutritious young leaves, ripe fruit, and flowers, as well as detecting predator camouflage and emotional states in other primates. == Wavelength == Isaac Newton discovered that white light after being split into its component colors when passed through a dispersive prism could be recombined to make white light by passing them through a different prism. The visible light spectrum ranges from about 380 to 740 nanometers. Spectral colors (colors that are produced by a narrow band of wavelengths) such as red, orange, yellow, green, cyan, blue, and violet can be found in this range. These spectral colors do not refer to a single wavelength, but rather to a set of wavelengths: red, 625–740 nm; orange, 590–625 nm; yellow, 565–590 nm; green, 500–565 nm; cyan, 485–500 nm; blue, 450–485 nm; violet, 380–450 nm. Wavelengths longer or shorter than this range are called infrared or ultraviolet, respectively. Humans cannot generally see these wavelengths, but other animals may. === Hue detection === Sufficient differences in wavelength cause a difference in the perceived hue; the just-noticeable difference in wavelength varies from about 1 nm in the blue-green and yellow wavelengths to 10 nm and more in the longer red and shorter blue wavelengths. Although the human eye can distinguish up to a few hundred hues, when those pure spectral colors are mixed together or diluted with white light, the number of distinguishable chromaticities can be much higher. In very low light levels, vision is scotopic: light is detected by rod cells of the retina. Rods are maximally sensitive to wavelengths near 500 nm and play little, if any, role in color vision. In brighter light, such as daylight, vision is photopic: light is detected by cone cells which are responsible for color vision. Cones are sensitive to a range of wavelengths, but are most sensitive to wavelengths near 555 nm. Between these regions, mesopic vision comes into play and both rods and cones provide signals to the retinal ganglion cells. The shift in color perception from dim light to daylight gives rise to differences known as the Purkinje effect. The perception of "white" is formed by the entire spectrum of visible light, or by mixing colors of just a few wavelengths in animals with few types of color receptors. In humans, white light can be perceived by combining wavelengths such as red, green, and blue, or just a pair of complementary colors such as blue and yellow. === Non-spectral colors === There are a variety of colors in addition to spectral colors and their hues. These include grayscale colors, shades of colors obtained by mixing grayscale colors with spectral colors, violet-red colors, impossible colors, and metallic colors. Grayscale colors include white, gray, and black. Rods contain rhodopsin, which reacts to light intensity, providing grayscale coloring. Shades include colors such as pink or brown. Pink is obtained from mixing red and white. Brown may be obtained from mixing orange with gray or black. Navy is obtained from mixing blue and black. Violet-red colors include hues and shades of magenta. The light spectrum is a line on which violet is one end and the other is red, and yet we see hues of purple that connect those two colors. Impossible colors are a combination of cone responses that cannot be naturally produced. For example, medium cones cannot be activated completely on their own; if they were, we would see a 'hyper-green' color. == Dimensionality == Color vision is categorized foremost according to the dimensionality of the color gamut, which is defined by the number of primaries required to represent the color vision. This is generally equal to the number of photopsins expressed: a correlation that holds for vertebrates but not invertebrates. The common vertebrate ancestor possessed four photopsins (expressed in cones) plus rhodopsin (expressed in rods), so was tetrachromatic. However, many vertebrate lineages have lost one or many photopsin genes, leading to lower-dimension color vision. The dimensions of color vision range from 1-dimensional and up: == Physiology of color perception == Perception of color begins with specialized retinal cells known as cone cells. Cone cells contain different forms of opsin – a pigment protein – that have different spectral sensitivities. Humans contain three types, resulting in trichromatic color vision. Each individual cone contains pigments composed of opsin apoprotein covalently linked to a light-absorbing prosthetic group: either 11-cis-hydroretinal or, more rarely, 11-cis-dehydroretinal. The cones are conventionally labeled according to the ordering of the wavelengths of the peaks of their spectral sensitivities: short (S), medium (M), and long (L) cone types. These three types do not correspond well to particular colors as we know them. Rather, the perception of color is achieved by a complex process that starts with the differential output of these cells in the retina and which is finalized in the visual cortex and associative areas of the brain. For example, while the L cones have been referred to simply as red receptors, microspectrophotometry has shown that their peak sensitivity is in the greenish-yellow region of the spectrum. Similarly, the S cones and M cones do not directly correspond to blue and green, although they are often described as such. The RGB color model, therefore, is a convenient means for representing color but is not directly based on the types of cones in the human eye. The peak response of human cone cells varies, even among individuals with typical color vision; in some non-human species this polymorphic variation is even greater, and it may well be adaptive. === Theories === Two complementary theories of color vision are the trichromatic theory and the opponent process theory. The trichromatic theory, or Young–Helmholtz theory, proposed in the 19th century by Thomas Young and Hermann von Helmholtz, posits three types of cones preferentially sensitive to blue, green, and red, respectively. Others have suggested that the trichromatic theory is not specifically a theory of color vision but a theory of receptors for all vision, including color but not specific or limited to it. Equally, it has been suggested that the relationship between the phenomenal opponency described by Ewald Hering and the physiological opponent processes are not straightforward (see below), making of physiological opponency a mechanism that is relevant to the whole of vision, and not just to color vision alone. Hering proposed the opponent process theory in 1872. It states that the visual system interprets color in an antagonistic way: red vs. green, blue vs. yellow, black vs. white. Both theories are generally accepted as valid, describing different stages in visual physiology, visualized in the adjacent diagram. Green–magenta and blue–yellow are scales with mutually exclusive boundaries. In the same way that there cannot exist a "slightly negative" positive number, a single eye cannot perceive a bluish-yellow or a reddish-green. Although these two theories are both currently widely accepted theories, past and more recent work has led to criticism of the opponent process theory, stemming from a number of what are presented as discrepancies in the standard opponent process theory. For example, the phenomenon of an after-image of complementary color can be induced by fatiguing the cells responsible for color perception, by staring at a vibrant color for a length of time, and then looking at a white surface. This phenomenon of complementary colors shows that cyan, rather than green, is the complement of red, and that magenta, rather than red, is the complement of green. It therefore also shows that the reddish-green color supposed to be impossible by opponent process theory is actually the color yellow. Although this phenomenon is more readily explained by the trichromatic theory, explanations for the discrepancy may include alterations to the opponent process theory, such as redefining the opponent colors as red vs. cyan, to reflect this effect. Despite such criticis

    Read more →
  • Microsoft Office PerformancePoint Server

    Microsoft Office PerformancePoint Server

    Microsoft Office PerformancePoint Server is a business intelligence software product released in 2007 by Microsoft. The product was generally an integration of the acquisitions from ProClarity - the Planning Server and Monitoring Server - into Microsoft's SharePoint server product line. Although discontinued in 2009, the dashboard, scorecard, and analytics capabilities of PerformancePoint Server were incorporated into SharePoint 2010 and later versions. PerformancePoint Server also provided a planning and budgeting component directly integrated with Excel. == History == Microsoft offered preview releases of PerformancePoint Server starting in mid-2006. Previews of the product were formed from Business Scorecard Manager 2005 and the Planning Server component. Acquisitions ProClarity and Great Plains brought additional analytics and planning/reporting capabilities, as well as companion products ProClarity 6.3 and FRx. PerformancePoint Server was officially released in November 2007. Microsoft discontinued PerformancePoint Server as an independent product in 2009 and folded its dashboard, scorecard and analytics capabilities into PerformancePoint Services in SharePoint Server 2010. == Monitoring Server Component == Business monitoring capabilities, including dashboards, scorecards & key performance indicators, navigable reports for deeper analysis, strategy maps, and linked filtering, are provided by PerformancePoint's Monitoring Server component. A Dashboard Designer application that is distributed from Monitoring Server enables business analysts or IT Administrators to: create & test data source connections create views that use those data connections assemble the views into a dashboard deploy the dashboard as a SharePoint page Dashboard Designer saved content and security information back to the Monitoring Server. Data source connections, such as OLAP cubes or relational tables, were also made through Monitoring Server. After a dashboard has been published to the Monitoring Server database, it would be deployed as a SharePoint page and shared with other users as such. When the pages were opened in a web browser, Monitoring Server updated the data in the views by connecting back to the original data sources. == Planning Server Component == PerformancePoint's Planning Server component supported maintenance of logical business models, budget & approval workflows, enterprise data sources, and it followed Generally Accepted Accounting Principles. Planning Server made use of Excel for input and line-of-business reporting, as well as SQL Server for storing and processing business models. == Management Reporter Component == The Management Reporter component was designed to perform financial reporting and can read PerformancePoint Planning models directly. A development kit was also available to allow this component to read other models.

    Read more →
  • Explore-then-commit algorithm

    Explore-then-commit algorithm

    Explore Then Commit (ETC) is an algorithm for the multi-armed bandit problem foc,used on finding the best trade-off between exploration and exploitation. == Multi-armed bandit problem == The multi-armed bandit problem is a sequential game where one player has to choose at each turn between K {\displaystyle K} actions (arms). Behind every arm a {\displaystyle a} is an unknown distribution ν a {\displaystyle \nu _{a}} that lies in a set D {\displaystyle {\mathcal {D}}} known by the player (for example, D {\displaystyle {\mathcal {D}}} can be the set of Gaussian distributions or Bernoulli distributions). At each turn t {\displaystyle t} the player chooses (pulls) an arm a t {\displaystyle a_{t}} , they then get an observation X t {\displaystyle X_{t}} of the distribution ν a t {\displaystyle \nu _{a_{t}}} . === Regret minimization === The goal is to minimize the regret at time T {\displaystyle T} that is defined as R T := ∑ a = 1 K Δ a E [ N a ( T ) ] {\displaystyle R_{T}:=\sum _{a=1}^{K}\Delta _{a}\mathbb {E} [N_{a}(T)]} where μ a := E [ ν a ] {\displaystyle \mu _{a}:=\mathbb {E} [\nu _{a}]} is the mean of arm a {\displaystyle a} μ ∗ := max a μ a {\displaystyle \mu ^{}:=\max _{a}\mu _{a}} is the highest mean Δ a := μ ∗ − μ a {\displaystyle \Delta _{a}:=\mu ^{}-\mu _{a}} N a ( t ) {\displaystyle N_{a}(t)} is the number of pulls of arm a {\displaystyle a} up to turn t {\displaystyle t} The player has to find an algorithm that chooses at each turn t {\displaystyle t} which arm to pull based on the previous actions and observations ( a s , X s ) s < t {\displaystyle (a_{s},X_{s})_{s Read more →

  • Information explosion

    Information explosion

    Information explosion is the rapid increase in the amount of published information or data and the effects of this abundance. As the amount of available data grows, the problem of managing the information becomes more difficult, which can lead to information overload. The Online Oxford English Dictionary indicates use of the phrase in a March 1964 New Statesman article. The New York Times first used the phrase in its editorial content in an article by Walter Sullivan on June 7, 1964, in which he described the phrase as "much discussed". The earliest known use of the phrase was in a speech about television by NBC president Pat Weaver at the Institute of Practitioners of Advertising in London on September 27, 1955. The speech was rebroadcast on radio station WSUI in Iowa City and excerpted in the Daily Iowan newspaper two months later. Many sectors are seeing this rapid increase in the amount of information available such as healthcare, supermarkets, and governments. Another sector that is being affected by this phenomenon is journalism. Such a profession, which in the past was responsible for the dissemination of information, may be suppressed by the overabundance of information today. Techniques to gather knowledge from an overabundance of electronic information (e.g., data fusion may help in data mining) have existed since the 1970s. Another common technique to deal with such amount of information is qualitative research. Such approaches aim to organize the information, synthesizing, categorizing and systematizing in order to be more usable and easier to search. == Growth patterns == The world's technological capacity to store information grew from, optimally compressed, 2.6 exabytes in 1986 to 15.7 in 1993, over 54.5 in 2000, and to 295 exabytes in 2007. The world's technological capacity to receive information through one-way broadcast networks was 432 exabytes of (optimally compressed) information in 1986, 715 (optimally compressed) exabytes in 1993, 1,200 (optimally compressed) exabytes in 2000, and 1,900 in 2007. The world's effective capacity to exchange information through two-way telecommunications networks was 0.281 exabytes of (optimally compressed) information in 1986, 0.471 in 1993, 2.2 in 2000, and 65 (optimally compressed) exabytes in 2007. A new metric that is being used in an attempt to characterize the growth in person-specific information, is the disk storage per person (DSP), which is measured in megabytes/person (where megabytes is 106 bytes and is abbreviated MB). Global DSP (GDSP) is the total rigid disk drive space (in MB) of new units sold in a year divided by the world population in that year. The GDSP metric is a crude measure of how much disk storage could possibly be used to collect person-specific data on the world population. In 1983, one million fixed drives with an estimated total of 90 terabytes were sold worldwide; 30MB drives had the largest market segment. In 1996, 105 million drives, totaling 160,623 terabytes were sold with 1 and 2 gigabyte drives leading the industry. By the year 2000, with 20GB drive leading the industry, rigid drives sold for the year are projected to total 2,829,288 terabytes Rigid disk drive sales to top $34 billion in 1997. According to Latanya Sweeney, there are three trends in data gathering today: Type 1. Expansion of the number of fields being collected, known as the “collect more” trend. Type 2. Replace an existing aggregate data collection with a person-specific one, known as the “collect specifically” trend. Type 3. Gather information by starting a new person-specific data collection, known as the “collect it if you can” trend. == Related terms == Since "information" in electronic media is often used synonymously with "data", the term information explosion is closely related to the concept of data flood (also dubbed data deluge). Sometimes the term information flood is used as well. All of those basically boil down to the ever-increasing amount of electronic data exchanged per time unit. A term that covers the potential negative effects of information explosion is information inflation. The awareness about non-manageable amounts of data grew along with the advent of ever more powerful data processing since the mid-1960s. == Challenges == Even though the abundance of information can be beneficial in several levels, some problems may be of concern such as privacy, legal and ethical guidelines, filtering and data accuracy. Filtering refers to finding useful information in the middle of so much data, which relates to the job of data scientists. A typical example of a necessity of data filtering (data mining) is in healthcare since in the next years is due to have EHRs (Electronic Health Records) of patients available. With so much information available, the doctors will need to be able to identify patterns and select important data for the diagnosis of the patient. On the other hand, according to some experts, having so much public data available makes it difficult to provide data that is actually anonymous. Another point to take into account is the legal and ethical guidelines, which relates to who will be the owner of the data and how frequently he/she is obliged to the release this and for how long. With so many sources of data, another problem will be accuracy of such. An untrusted source may be challenged by others, by ordering a new set of data, causing a repetition in the information. According to Edward Huth, another concern is the accessibility and cost of such information. The accessibility rate could be improved by either reducing the costs or increasing the utility of the information. The reduction of costs according to the author, could be done by associations, which should assess which information was relevant and gather it in a more organized fashion. == Web servers == As of August 2005, there were over 70 million web servers. As of September 2007 there were over 135 million web servers. == Blogs == According to Technorati, the number of blogs doubles about every 6 months with a total of 35.3 million blogs as of April 2006. This is an example of the early stages of logistic growth, where growth is approximately exponential, since blogs are a recent innovation. As the number of blogs approaches the number of possible producers (humans), saturation occurs, growth declines, and the number of blogs eventually stabilizes.

    Read more →
  • Unspent transaction output

    Unspent transaction output

    In cryptocurrencies, an unspent transaction output (UTXO, often capitalized as UTxO) is a distinctive element in a subset of digital currency models. A UTXO represents a certain amount of cryptocurrency that has been authorized by a sender and is available to be spent by a recipient. The utilization of UTXOs in transaction processes is a key feature of many cryptocurrencies, but it primarily characterizes those implementing the UTXO model. UTXOs employ public key cryptography to ascertain and transfer ownership. More specifically, the recipient's public key is formatted into the UTXO, thereby limiting the capability to spend the UTXO to the account that can demonstrate ownership of the corresponding private key. A valid digital signature associated with the public key must be included for the UTXO to be spent. In the UTXO model, each unit of currency is treated as a discrete object. The history of a UTXO is documented only within the blocks where it is transferred. To ascertain the total balance of an account, one must scan each block to find the latest UTXOs linked to that account. While all nodes within a blockchain network must consent to the block history, the blocks relevant to an account's balance are unique to that account. UTXOs constitute a chain of ownership depicted as a series of digital signatures dating back to the coin's inception, regardless of whether the coin was minted via mining, staking, or another procedure determined by the cryptocurrency protocol. The UTXO model was invented for Bitcoin. Cardano uses an extended version of the UTXO model known as EUTXO. == Origins == The conceptual framework of the UTXO model can be traced back to Hal Finney's Reusable Proofs of Work proposal, which itself was based on Adam Back's 1997 Hashcash proposal. Bitcoin, released in 2009, was the first widespread implementation of the UTXO model in practice. == UTXO model vs. account Model == Cryptocurrencies that utilize the UTXO model function differently compared to those using the account model. In the UTXO model, individual units of cryptocurrency, termed as unspent transaction outputs (UTXOs), are transferred between users, analogous to the exchange of physical cash. This model impacts how transactions and ownership are recorded and verified within the blockchain network. The account model preserves a record of each account and its corresponding balance for every block added to the network. This setup enables quicker balance verification without the need to scan historical blocks, but it increases the raw size of each block (though data compression techniques can be utilized to alleviate this). However, both models necessitate the inspection of past blocks to fully authenticate the origin of coins. In the UTXO model, each object is immutable - units of coins cannot be 'edited' in the same way an account balance is modified when a transaction occurs. Rather, the balance is computed from the transaction history dating back to when the coins were first minted. This simplicity enhances security, as a UTXO either exists in its anticipated form or it does not. In contrast, the account model requires meticulous verification of the account's status during transactions, which can lead to oversights if not conducted correctly. In valid blockchain transactions, only unspent outputs (UTXOs) are permissible for funding subsequent transactions. This requirement is critical to prevent double-spending and fraud. Accordingly, inputs in a transaction are removed from the UTXO set, while outputs create new UTXOs that are added to the set. The holders of private keys, such as those with cryptocurrency wallets, can utilize these UTXOs for future transactions.

    Read more →
  • Certifying algorithm

    Certifying algorithm

    In theoretical computer science, a certifying algorithm is an algorithm that outputs, together with a solution to the problem it solves, a proof that the solution is correct. A certifying algorithm is said to be efficient if the combined runtime of the algorithm and a proof checker is slower by at most a constant factor than the best known non-certifying algorithm for the same problem. The proof produced by a certifying algorithm should be in some sense simpler than the algorithm itself, for otherwise any algorithm could be considered certifying (with its output verified by running the same algorithm again). Sometimes this is formalized by requiring that a verification of the proof take less time than the original algorithm, while for other problems (in particular those for which the solution can be found in linear time) simplicity of the output proof is considered in a less formal sense. For instance, the validity of the output proof may be more apparent to human users than the correctness of the algorithm, or a checker for the proof may be more amenable to formal verification. Implementations of certifying algorithms that also include a checker for the proof generated by the algorithm may be considered to be more reliable than non-certifying algorithms. For, whenever the algorithm is run, one of three things happens: it produces a correct output (the desired case), it detects a bug in the algorithm or its implication (undesired, but generally preferable to continuing without detecting the bug), or both the algorithm and the checker are faulty in a way that masks the bug and prevents it from being detected (undesired, but unlikely as it depends on the existence of two independent bugs). == Examples == Many examples of problems with checkable algorithms come from graph theory. For instance, a classical algorithm for testing whether a graph is bipartite would simply output a Boolean value: true if the graph is bipartite, false otherwise. In contrast, a certifying algorithm might output a 2-coloring of the graph in the case that it is bipartite, or a cycle of odd length if it is not. Any graph is bipartite if and only if it can be 2-colored, and non-bipartite if and only if it contains an odd cycle. Both checking whether a 2-coloring is valid and checking whether a given odd-length sequence of vertices is a cycle may be performed more simply than testing bipartiteness. Analogously, it is possible to test whether a given directed graph is acyclic by a certifying algorithm that outputs either a topological order or a directed cycle. It is possible to test whether an undirected graph is a chordal graph by a certifying algorithm that outputs either an elimination ordering (an ordering of all vertices such that, for every vertex, the neighbors that are later in the ordering form a clique) or a chordless cycle. And it is possible to test whether a graph is planar by a certifying algorithm that outputs either a planar embedding or a Kuratowski subgraph. The extended Euclidean algorithm for the greatest common divisor of two integers x and y is certifying: it outputs three integers g (the divisor), a, and b, such that ax + by = g. This equation can only be true of multiples of the greatest common divisor, so testing that g is the greatest common divisor may be performed by checking that g divides both x and y and that this equation is correct.

    Read more →
  • NewSQL

    NewSQL

    NewSQL is a class of relational database management systems that seek to provide the scalability of NoSQL systems for online transaction processing (OLTP) workloads while maintaining the ACID guarantees of a traditional database system. Many enterprise systems that handle high-profile data (e.g., financial and order processing systems) are too large for conventional relational databases, but have transactional and consistency requirements that are not practical for NoSQL systems. The only options previously available for these organizations were to either purchase more powerful computers or to develop custom middleware that distributes requests over conventional DBMS. Both approaches feature high infrastructure costs and/or development costs. NewSQL systems attempt to reconcile the conflicts. == History == The term was first used by 451 Group analyst Matthew Aslett in a 2011 research paper discussing the rise of a new generation of database management systems. One of the first NewSQL systems was the H-Store parallel database system. == Applications == Typical applications are characterized by heavy OLTP transaction volumes. OLTP transactions; are short-lived (i.e., no user stalls) touch small amounts of data per transaction use indexed lookups (no table scans) have a small number of forms (a small number of queries with different arguments). However, some support hybrid transactional/analytical processing (HTAP) applications. Such systems improve performance and scalability by omitting heavyweight recovery or concurrency control. == List of NewSQL-databases == Apache Trafodion Clustrix CockroachDB Couchbase CrateDB Google Spanner MySQL Cluster NuoDB OceanBase Pivotal GemFire XD SequoiaDB SingleStore was formerly known as MemSQL. TIBCO Active Spaces TiDB TokuDB TransLattice Elastic Database VoltDB YDB YugabyteDB == Features == The two common distinguishing features of NewSQL database solutions are that they support online scalability of NoSQL databases and the relational data model (including ACID consistency) using SQL as their primary interface. NewSQL systems can be loosely grouped into three categories: === New architectures === NewSQL systems adopt various internal architectures. Some systems employ a cluster of shared-nothing nodes, in which each node manages a subset of the data. They include components such as distributed concurrency control, flow control, and distributed query processing. === SQL engines === The second category are optimized storage engines for SQL. These systems provide the same programming interface as SQL, but scale better than built-in engines. === Transparent sharding === These systems automatically split databases across multiple nodes using Raft or Paxos consensus algorithm.

    Read more →
  • Artificial intelligence in government

    Artificial intelligence in government

    Artificial intelligence (AI) has a range of uses in government. It can be used to further public policy objectives (in areas such as emergency services, health and welfare), as well as assist the public to interact with the government (through the use of virtual assistants, for example). According to the Harvard Business Review, "Applications of artificial intelligence to the public sector are broad and growing, with early experiments taking place around the world." Hila Mehr from the Ash Center for Democratic Governance and Innovation at Harvard University notes that AI in government is not new, with postal services using machine methods in the late 1990s to recognise handwriting on envelopes to automatically route letters. The use of AI in government comes with significant benefits, including efficiencies resulting in cost savings (for instance by reducing the number of front office staff) and reducing the opportunities for corruption. However, it also carries risks (described below). == Uses of AI in government == The potential uses of AI in government are wide and varied, with Deloitte considering that "Cognitive technologies could eventually revolutionize every facet of government operations". Mehr suggests that six types of government problems are appropriate for AI applications: Resource allocation—such as where administrative support is required to complete tasks more quickly. Large datasets—where these are too large for employees to work efficiently and multiple datasets could be combined to provide greater insights. Expert shortage—including where basic questions could be answered and niche issues can be learned. Predictable scenario—historical data makes the situation predictable. Procedural tasks refer to repetitive tasks in which the answers to inputs or outputs are binary. Diverse data—where data takes various forms (such as visual and linguistic) and needs to be summarized regularly. Mehr states that "While applications of AI in government work have not kept pace with the rapid expansion of AI in the private sector, the potential use cases in the public sector mirror common applications in the private sector." Potential and actual uses of AI in government can be divided into three broad categories: those that contribute to public policy objectives, those that assist public interactions with the government, and other uses. === Contributing to public policy objectives === There are a range of examples of where AI can contribute to public policy objectives. These include: Receiving benefits at job loss, retirement, bereavement and child birth almost immediately, in an automated way (thus without requiring any actions from citizens at all) Social insurance service provision Classifying emergency calls based on their urgency (like the system used by the Cincinnati Fire Department in the United States) Detecting and preventing the spread of diseases Assisting public servants in making welfare payments and immigration decisions Adjudicating bail hearings Triaging health care cases Monitoring social media for public feedback on policies Monitoring social media to identify emergency situations Identifying fraudulent benefits claims Predicting a crime and recommending optimal police presence Predicting traffic congestion and car accidents Anticipating road maintenance requirements Identifying breaches of health regulations Providing personalised education to students Marking exam papers Assisting with defence and national security (see Artificial intelligence § Military and Applications of artificial intelligence § Other fields in which AI methods are implemented respectively) Artificial Intelligence in China has been used to drive both political and economic markets. In 2019, Shanghai’s government rolled out 100 billion yuan to assist in funding enterprises that used AI to introduce 22 new policy agendas. Shanghai invested in these enterprises to attract top international talent in order to set up the Shanghai Municipal Big Data Center. City Brain AI is an urban management platform made by Alibaba. China uses City Brain AI to maintain a significant share of capital investment through public and state owned enterprises. The synergy between public and private sectors are more than capital-driven with City Brain AI. The blend of both public and private shareholding is only made out to be through the role of provincial and sub-provincial governments. Both hold control over the direction that City Brain AI makes both socially and economically. === Assisting public interactions with government === AI can be used to assist members of the public to interact with government and access government services, for example by: Answering questions using virtual assistants or chatbots (see below) Directing requests to the appropriate area within government Filling out forms Assisting with searching documents (e.g. IP Australia's trade mark search) Scheduling appointments Various governments, including those of Australia and Estonia, have implemented virtual assistants to aid citizens in navigating services, with applications ranging from tax inquiries to life-event registrations. === Gerrymandering === Gerrymandering is a method of influencing political process by drawing map boundaries in favor of incumbent parties. Academic researchers Wendy Tam Cho and Bruce Cain have proposed partially automating the map-drawing process with an AI system to reduce partisan gerrymandering. Even with this AI system, the process may still be manipulated to favor partisan interests, so the researchers emphasized the importance of transparency and human involvement. === Other uses === Other uses of AI in government include: Translation Language interpretation pioneered by the European Commission's Directorate General for Interpretation and Florika Fink-Hooijer. Drafting documents == Potential benefits == AI offers potential efficiencies and cost savings for the government. For example, Deloitte has estimated that automation could save US Government employees between 96.7 million to 1.2 billion hours a year, resulting in potential savings of between $3.3 billion to $41.1 billion a year. The Harvard Business Review has stated that while this may lead a government to reduce employee numbers, "Governments could instead choose to invest in the quality of its services. They can re-employ workers' time towards more rewarding work that requires lateral thinking, empathy, and creativity—all things at which humans continue to outperform even the most sophisticated AI program." == Risks == Risks associated with the use of AI in government include AI becoming susceptible to bias, a lack of transparency in how an AI application may make decisions, and the accountability for any such decisions. For example, a 2026 lawsuit alleged that the U.S. Department of Government Efficiency used ChatGPT to flag and cancel federal humanities grants, including projects on Jewish history and Israeli culture, over some objections from NEH officials, illustrating how automated decision-making could affect funding outcomes.

    Read more →
  • LRE Map

    LRE Map

    The LRE Map (Language Resources and Evaluation) is a freely accessible large database on resources dedicated to Natural language processing. The original feature of LRE Map is that the records are collected during the submission of different major Natural language processing conferences. The records are then cleaned and gathered into a global database called "LRE Map". The LRE Map is intended to be an instrument for collecting information about language resources and to become, at the same time, a community for users, a place to share and discover resources, discuss opinions, provide feedback, discover new trends, etc. It is an instrument for discovering, searching and documenting language resources, here intended in a broad sense, as both data and tools. The large amount of information contained in the Map can be analyzed in many different ways. For instance, the LRE Map can provide information about the most frequent type of resource, the most represented language, the applications for which resources are used or are being developed, the proportion of new resources vs. already existing ones, or the way in which resources are distributed to the community. == Context == Several institutions worldwide maintain catalogues of language resources (ELRA, LDC, NICT Universal Catalogue, ACL Data and Code Repository, OLAC, LT World, etc.) However, it has been estimated that only 10% of existing resources are known, either through distribution catalogues or via direct publicity by providers (web sites and the like). The rest remains hidden, the only occasions where it briefly emerges being when a resource is presented in the context of a research paper or report at some conference. Even in this case, nevertheless, it might be that a resource remains in the background simply because the focus of the research is not on the resource per se. == History == The LRE Map originated under the name "LREC Map" during the preparation of LREC 2010 conference. More specifically, the idea was discussed within the FlaReNet project, and in collaboration with ELRA and the Institute of Computational Linguistics of CNR in Pisa, the Map was put in place at LREC 2010. The LREC organizers asked the authors to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors were then gathered in a global matrix called the LREC Map. The same methodology and requirements from the authors has been then applied and extended to other conferences, namely COLING-2010, EMNLP-2010, RANLP-2011, LREC 2012, LREC 2014 and LREC 2016. After this generalization to other conferences, the LREC Map has been renamed as the LRE Map. == Size and content == The size of the database increases over time. The data collected amount to 4776 entries. Each resource is described according to the following attributes: Resource type, e.g. lexicon, annotation tool, tagger/parser. Resource production status, e.g. newly created finished, existing-updated. Resource availability, e.g. freely available, from data center. Resource modality, e.g. speech, written, sign language. Resource use, e.g. named entity recognition, language identification, machine translation. Resource language, e.g. English, 23 European Union languages, official languages of India. == Uses == The LRE map is a very important tool to chart the NLP field. Compared to other studied based on subjective scorings, the LRE map is made of real facts. The map has a great potential for many uses, in addition to being an information gathering tool: It is a great instrument for monitoring the evolution of the field (useful for funders), if applied in different contexts and times. It can be seen as a huge joint effort, the beginning of an even larger cooperative action not just among few leaders but among all the researchers. It is also an "educational" means towards the broad acknowledgment of the need of meta-research activities with the active involvement of many. It is also instrumental in introducing the new notion of "citation of resources" that could provide an award and a means of scholarly recognition for researchers engaged in resource creation. It is used to help the organization of the conferences of the field like LREC. == Derived matrices == The data were then cleaned and sorted by Joseph Mariani (CNRS-LIMSI IMMI) and Gil Francopoulo (CNRS-LIMSI IMMI + Tagmatica) in order to compute the various matrices of the final FLaReNet reports. One of them, the matrix for written data at LREC 2010 is as follows: English is the most studied language. Secondly, come French and German languages and then Italian and Spanish. == Future == The LRE Map has been extended to Language Resources and Evaluation Journal and other conferences.

    Read more →
  • Explore-then-commit algorithm

    Explore-then-commit algorithm

    Explore Then Commit (ETC) is an algorithm for the multi-armed bandit problem foc,used on finding the best trade-off between exploration and exploitation. == Multi-armed bandit problem == The multi-armed bandit problem is a sequential game where one player has to choose at each turn between K {\displaystyle K} actions (arms). Behind every arm a {\displaystyle a} is an unknown distribution ν a {\displaystyle \nu _{a}} that lies in a set D {\displaystyle {\mathcal {D}}} known by the player (for example, D {\displaystyle {\mathcal {D}}} can be the set of Gaussian distributions or Bernoulli distributions). At each turn t {\displaystyle t} the player chooses (pulls) an arm a t {\displaystyle a_{t}} , they then get an observation X t {\displaystyle X_{t}} of the distribution ν a t {\displaystyle \nu _{a_{t}}} . === Regret minimization === The goal is to minimize the regret at time T {\displaystyle T} that is defined as R T := ∑ a = 1 K Δ a E [ N a ( T ) ] {\displaystyle R_{T}:=\sum _{a=1}^{K}\Delta _{a}\mathbb {E} [N_{a}(T)]} where μ a := E [ ν a ] {\displaystyle \mu _{a}:=\mathbb {E} [\nu _{a}]} is the mean of arm a {\displaystyle a} μ ∗ := max a μ a {\displaystyle \mu ^{}:=\max _{a}\mu _{a}} is the highest mean Δ a := μ ∗ − μ a {\displaystyle \Delta _{a}:=\mu ^{}-\mu _{a}} N a ( t ) {\displaystyle N_{a}(t)} is the number of pulls of arm a {\displaystyle a} up to turn t {\displaystyle t} The player has to find an algorithm that chooses at each turn t {\displaystyle t} which arm to pull based on the previous actions and observations ( a s , X s ) s < t {\displaystyle (a_{s},X_{s})_{s Read more →

  • Subject (documents)

    Subject (documents)

    In library and information science documents (such as books, articles and pictures) are classified and searched by subject – as well as by other attributes such as author, genre and document type. This makes "subject" a fundamental term in this field. Library and information specialists assign subject labels to documents to make them findable. There are many ways to do this and in general there is not always consensus about which subject should be assigned to a given document. To optimize subject indexing and searching, we need to have a deeper understanding of what a subject is. The question: "what is to be understood by the statement 'document A belongs to subject category X'?" has been debated in the field for more than 100 years (see below) == Theoretical view == === Charles Ammi Cutter (1837–1903) === For Cutter the stability of subjects depends on a social process in which their meaning is stabilized in a name or a designation. A subject "referred [...] to those intellections [...] that had received a name that itself represented a distinct consensus in usage" (Miksa, 1983a, p. 60) and: the "systematic structure of established subjects" is "resident in the public realm" (Miksa, 1983a, p. 69); "[s]ubjects are by their very nature locations in a classificatory structure of publicly accumulated knowledge (Miksa, 1983a, p. 61). Bernd Frohmann adds: "The stability of the public realm in turn relies upon natural and objective mental structures which, with proper education, govern a natural progression from particular to general concepts. Since for Cutter, mind, society, and SKO [Systems of Knowledge Organization] stand one behind the other, each supporting each, all manifesting the same structure, his discursive construction of subjects invites connections with discourses of mind, education, and society. The Dewey Decimal Classification (DDC), by contrast, severs those connections. Melvil Dewey emphasized more than once that his system maps no structure beyond its own; there is neither a "transcendental deduction" of its categories nor any reference to Cutter's objective structure of social consensus. It is content-free: Dewey disdained any philosophical excogitation of the meaning of his class symbols, leaving the job of finding verbal equivalents to others. His innovation and the essence of the system lay in the notation. The DDC is a poorly semiotic system of expanding nests of ten digits, lacking any referent beyond itself. In it, a subject is wholly constituted in terms of its position in the system. The essential characteristic of a subject is a class symbol which refers only to other symbols. Its verbal equivalent is accidental, a merely pragmatic characteristic... .... The conflict of interpretations over "subjects" became explicit in the battles between "bibliography" (an approach to subjects having much in common with Cutter's) and Dewey's "close classification". William Fletcher spoke for the scholarly bibliographer.... Fletcher's "subjects", like Cutter's, referred to the categories of a fantasized, stable social order, whereas Dewey's subjects were elements of a semiological system of standardized, techno-bureaucratic administrative software for the library in its corporate, rather than high culture, incarnation". (Frohmann, 1994, 112–113). Cutter's early view on what a subject is, is probably wiser than most understandings that dominated the 20th century – and also the understanding reflected in the ISO-standard quoted below. The early statements quoted by Frohmann indicate that subjects are somehow shaped in social processes. When that is said, it should be added that they are not particularly detailed or clear. We only get a vague idea of the social nature of subjects. === S. R. Ranganathan (1892–1972) === A classification system with an explicit theoretical foundation is Ranganathan's Colon Classification. Ranganathan provided an explicit definition of the concept of "subject": Subject – an organized body of ideas, whose extension and intension are likely to fall coherently within the field of interests and comfortably within the intellectual competence and the field of inevitable specialization of a normal person. A related definition is given by one of Ranganathan's students: A subject is an organized and systematized body of ideas. It may consist of one idea or a combination of several... Ranganathan's definition of "subject" is strongly influenced by his Colon Classification system. The colon system is based on the combination of single elements from facets to subject designation. This is the reason why the combined nature of subjects are emphasized so strongly. It leads, however, to absurdities such as the claim that gold cannot be a subject (but is alternatively termed "an isolate"). This aspect of the theory has been criticized by Metcalfe (1973, p. 318). Metcalfe's skepticism regarding Ranganathan's theory is formulated in hard words (op. cit., p. 317): "This pseudo-science imposed itself on British disciples from about 1950 on...". It seems unacceptable that Ranganathan defines the word subject in a way that favors his own system. A scientific concept like "subject" should make it possible to compare different ways of establishing access to information. Whether or not subjects are combined or not should be examined once their definition has been given, it should not determined a priori, in the definition. Besides the emphasis on the combined, organizing and systematizing nature of subjects contains Ranganathan's definition of subject the pragmatic demand, that a subject should be determined in a way that suits a normal person's competency or specialization. Again we see a strange kind of wishful thinking mixing a general understanding of a concept with demands put by his own specific system. One thing is what the word subject means, quite another issue is how to provide subject descriptions that fulfill demands such as the specificity of a given information retrieval language which fulfill demands put on the system, such as precision and recall. If researchers too often define terms in ways that favor specific kinds of systems, that are such definitions not useful to provide more general theories about subjects, subject analysis and IR. Among other things are comparative studies of different kinds of systems made difficult. Based on these arguments, as well as additional arguments which have been used in the literature, we may conclude that Ranganathan's definition of the concept "subject" is not suited for scientific use. Like the definition of "subject" given by the ISO-standard for topic maps, may Ranganathan's definition be useful within his own closed system. The purpose of a scientific and scholarly field is, however, to examine the relative fruitfulness of systems such as topic maps and Colon Classification. For such purpose is another understanding of "subject" necessary. === Patrick Wilson (1927–2003) === In his book Wilson (1968) examined – in particular by thought experiments – the suitability of different methods of examining the subject of a document. The methods were: identifying the author's purpose for writing the document, weighing the relative dominance and subordination of different elements in the picture, which the reading imposes on the reader, grouping or count the document's use of concepts and references, construing a set of rules for selecting elements deemed necessary (as opposed to unnecessary) for the work as a whole. Patrick Wilson shows convincingly that each of these methods are insufficient to determine the subject of a document and is led to conclude ( p. 89): "The notion of the subject of a writing is indeterminate..." or, on p. 92 (about what users may expect to find using a particular position in a library classification system): "For nothing definite can be expected of the things found at any given position". In connection to the last quote has Wilson an interesting footnote in which he writes that authors of documents often use terms in ambiguous ways ("hostility" is used as an example). Even if the librarian could personally develop a very precise understanding of a concept, he would be unable to use it in his classification, because none of the documents use the term in the same precise way. Based on this argumentation is Wilson led to conclude: "If people write on what are for them ill-defined phenomena, a correct description of their subjects must reflect the ill-definedness". Wilson's concept of subject was discussed by Hjørland (1992) who found that it is problematic to give up the precise understanding of such a basic term in LIS. Wilson's arguments led him to an agnostic position which Hjørland found unacceptable and unnecessary. Concerning the authors' use of ambiguous terms, the role of the subject analysis is to determine which documents would be fruitful for users to identify whether or not the documents use one or another term or whether a given term i

    Read more →
  • Ontology engineering

    Ontology engineering

    In computer science, information science and systems engineering, ontology engineering is a field which studies the methods and methodologies for building ontologies, which encompasses a representation, formal naming and definition of the categories, properties and relations between the concepts, data and entities of a given domain of interest. In a broader sense, this field also includes a knowledge construction of the domain using formal ontology representations such as OWL/RDF. A large-scale representation of abstract concepts such as actions, time, physical objects and beliefs would be an example of ontological engineering. Ontology engineering is one of the areas of applied ontology, and can be seen as an application of philosophical ontology. Core ideas and objectives of ontology engineering are also central in conceptual modeling. Ontology engineering aims at making explicit the knowledge contained within software applications, and within enterprises and business procedures for a particular domain. Ontology engineering offers a direction towards solving the inter-operability problems brought about by semantic obstacles, i.e. the obstacles related to the definitions of business terms and software classes. Ontology engineering is a set of tasks related to the development of ontologies for a particular domain. Automated processing of information not interpretable by software agents can be improved by adding rich semantics to the corresponding resources, such as video files. One of the approaches for the formal conceptualization of represented knowledge domains is the use of machine-interpretable ontologies, which provide structured data in, or based on, RDF, RDFS, and OWL. Ontology engineering is the design and creation of such ontologies, which can contain more than just the list of terms (controlled vocabulary); they contain terminological, assertional, and relational axioms to define concepts (classes), individuals, and roles (properties) (TBox, ABox, and RBox, respectively). Ontology engineering is a relatively new field of study concerning the ontology development process, the ontology life cycle, the methods and methodologies for building ontologies, and the tool suites and languages that support them. A common way to provide the logical underpinning of ontologies is to formalize the axioms with description logics, which can then be translated to any serialization of RDF, such as RDF/XML or Turtle. Beyond the description logic axioms, ontologies might also contain SWRL rules. The concept definitions can be mapped to any kind of resource or resource segment in RDF, such as images, videos, and regions of interest, to annotate objects, persons, etc., and interlink them with related resources across knowledge bases, ontologies, and LOD datasets. This information, based on human experience and knowledge, is valuable for reasoners for the automated interpretation of sophisticated and ambiguous contents, such as the visual content of multimedia resources. Application areas of ontology-based reasoning include, but are not limited to, information retrieval, automated scene interpretation, and knowledge discovery. == Languages == An ontology language is a formal language used to encode the ontology. There are a number of such languages for ontologies, both proprietary and standards-based: Common logic is ISO standard 24707, a specification for a family of ontology languages that can be accurately translated into each other. The Cyc project has its own ontology language called CycL, based on first-order predicate calculus with some higher-order extensions. The Gellish language includes rules for its own extension and thus integrates an ontology with an ontology language. IDEF5 is a software engineering method to develop and maintain usable, accurate, domain ontologies. KIF is a syntax for first-order logic that is based on S-expressions. Rule Interchange Format (RIF), F-Logic and its successor ObjectLogic combine ontologies and rules. OWL is a language for making ontological statements, developed as a follow-on from RDF and RDFS, as well as earlier ontology language projects including OIL, DAML and DAML+OIL. OWL is intended to be used over the World Wide Web, and all its elements (classes, properties and individuals) are defined as RDF resources, and identified by URIs. OntoUML is a well-founded language for specifying reference ontologies. SHACL (RDF SHapes Constraints Language) is a language for describing structure of RDF data. It can be used together with RDFS and OWL or it can be used independently from them. XBRL (Extensible Business Reporting Language) is a syntax for expressing business semantics. == Methodologies and tools == DOGMA KAON OntoClean HOZO Protégé (software) Large language models == In life sciences == Life sciences is flourishing with ontologies that biologists use to make sense of their experiments. For inferring correct conclusions from experiments, ontologies have to be structured optimally against the knowledge base they represent. The structure of an ontology needs to be changed continuously so that it is an accurate representation of the underlying domain. Recently, an automated method was introduced for engineering ontologies in life sciences such as Gene Ontology (GO), one of the most successful and widely used biomedical ontology. Based on information theory, it restructures ontologies so that the levels represent the desired specificity of the concepts. Similar information theoretic approaches have also been used for optimal partition of Gene Ontology. Given the mathematical nature of such engineering algorithms, these optimizations can be automated to produce a principled and scalable architecture to restructure ontologies such as GO. Open Biomedical Ontologies (OBO), a 2006 initiative of the U.S. National Center for Biomedical Ontology, provides a common 'foundry' for various ontology initiatives, amongst which are: The Generic Model Organism Project (GMOD) Gene Ontology Consortium Sequence Ontology Ontology Lookup Service The Plant Ontology Consortium Standards and Ontologies for Functional Genomics and more

    Read more →
  • Lexical choice

    Lexical choice

    Lexical choice is the subtask of Natural language generation that involves choosing the content words (nouns, non-auxiliary verbs, adjectives, and adverbs) in a generated text. Function words (determiners, for example) are usually chosen during realisation. == Examples == The simplest type of lexical choice involves mapping a domain concept (perhaps represented in an ontology) to a word. For example, the concept Finger might be mapped to the word finger. A more complex situation is when a domain concept is expressed using different words in different situations. For example, the domain concept Value-Change can be expressed in many ways: The temperature rose: the verb rose is used for a Value-Change in temperature which increases the value. The temperature fell: the verb fell is used for a Value-Change in temperature which decreases the value. The rain got heavier: the phrase got heavier is used for a Value-Change in precipitation amount when the precipitation is rain. Sometimes words can communicate additional contextual information, for example: The temperature plummeted: the verb plummeted is used for a Value-Change in temperature which decreases the value, when the change is rapid and large. Contextual information is especially significant for vague terms such as tall. For example, a 2m tall man is tall, but a 2m tall horse is small. == Linguistic perspective == Lexical choice modules must be informed by linguistic knowledge of how the system's input data maps onto words. This is a question of semantics, but it is also influenced by syntactic factors (such as collocation effects) and pragmatic factors (such as context). Hence NLG systems need linguistic models of how meaning is mapped to words in the target domain (genre) of the NLG system. Genre tends to be very important; for example the verb veer has a very specific meaning in weather forecasts (wind direction is changing in a clockwise direction) which it does not have in general English, and a weather-forecast generator must be aware of this genre-specific meaning. In some cases there are major differences in how different people use the same word; for example, some people use by evening to mean 6PM and others use it to mean midnight. Psycholinguists have shown that when people speak to each other, they agree on a common interpretation via lexical alignment; this is not something which NLG systems can yet do. Ultimately, lexical choice must deal with the fundamental issue of how language relates to the non-linguistic world. For example, a system which chose colour terms such as red to describe objects in a digital image would need to know which RGB pixel values could generally be described as red; how this was influenced by visual (lighting, other objects in the scene) and linguistic (other objects being discussed) context; what pragmatic connotations were associated with red (for example, when an apple is called red, it is assumed to be ripe as well as have the colour red); and so forth. == Algorithms and models == A number of algorithms and models have been developed for lexical choice in the research community, for example Edmonds developed a model for choosing between near-synonyms (words with similar core meanings but different connotations). However such algorithms and models have not been widely used in applied NLG systems; such systems have instead often used quite simple computational models, and invested development effort in linguistic analysis instead of algorithm development.

    Read more →
  • Information flow

    Information flow

    In discourse-based grammatical theory, information flow is any tracking of referential information by speakers. Information may be new, i.e., just introduced into the conversation; given, i.e., already active in the speakers' consciousness; or old, i.e., no longer active. The various types of activation, and how these are defined, are model-dependent. Information flow affects grammatical structures such as: Word order (topic, focus, and afterthought constructions). Active, passive, or middle voice. Choice of deixis, such as articles; "medial" deictics such as Spanish ese and Japanese sore are generally determined by the familiarity of a referent rather than by physical distance. Overtness of information, such as whether an argument of a verb is indicated by a lexical noun phrase, a pronoun, or not mentioned at all. Clefting: Splitting a single clause into two clauses, each with its own verb, e.g. ‘The chicken turtles tasted like chicken.’ becomes ‘It was the chicken turtle | that tasted like chicken.’ In this case, clefting is used to shift the focus of the sentence to the subject, the chicken turtle. Front focus: Placing at the start (front) of a sentence information that would normally occur later in the sentence, to give it extra prominence. For example, in pop culture, Yoda's speech often utilizes such syntactic construction, such as when he says 'much to learn you still have' to Luke Skywalker. End focus (or end weight): Given or familiar information followed by new information. This gives prominence to the final part of the sentences and can enable suspense to build, e.g. ‘Through the door came a gigantic wolf’.(Umer Prince)

    Read more →
  • PL/Perl

    PL/Perl

    PL/Perl (Procedural Language/Perl) is a procedural language supported by the PostgreSQL RDBMS. PL/Perl, as an imperative programming language, allows more control than the relational algebra of SQL. Programs created in the PL/Perl language are called functions and can use most of the features that the Perl programming language provides, including common flow control structures and syntax that has incorporated regular expressions directly. These functions can be evaluated as part of a SQL statement, or in response to a trigger or rule. The design goals of PL/Perl were to create a loadable procedural language that: can be used to create functions and trigger procedures, adds control structures to the SQL language, can perform complex computations, can be defined to be either trusted or untrusted by the server, is easy to use. PL/Perl is one of many "PL" languages available for PostgreSQL PL/pgSQL PL/Java, plPHP, PL/Python, PL/R, PL/Ruby, PL/sh, and PL/Tcl.

    Read more →