AI App Builder Free Unlimited

AI App Builder Free Unlimited — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Version space learning

  Version space learning is a logical approach to machine learning, specifically binary classification. Version space learning algorithms search a predefined space of hypotheses, viewed as a set of logical sentences. Formally, the hypothesis space is a disjunction H 1 ∨ H 2 ∨ . . . ∨ H n {\displaystyle H_{1}\lor H_{2}\lor ...\lor H_{n}} (i.e., one or more of hypotheses 1 through n are true). A version space learning algorithm is presented with examples, which it will use to restrict its hypothesis space; for each example x, the hypotheses that are inconsistent with x are removed from the space. This iterative refining of the hypothesis space is called the candidate elimination algorithm, the hypothesis space maintained inside the algorithm, its version space. == The version space algorithm == In settings where there is a generality-ordering on hypotheses, it is possible to represent the version space by two sets of hypotheses: (1) the most specific consistent hypotheses, and (2) the most general consistent hypotheses, where "consistent" indicates agreement with observed data. The most specific hypotheses (i.e., the specific boundary SB) cover the observed positive training examples, and as little of the remaining feature space as possible. These hypotheses, if reduced any further, exclude a positive training example, and hence become inconsistent. These minimal hypotheses essentially constitute a (pessimistic) claim that the true concept is defined just by the positive data already observed: Thus, if a novel (never-before-seen) data point is observed, it should be assumed to be negative. (I.e., if data has not previously been ruled in, then it's ruled out.) The most general hypotheses (i.e., the general boundary GB) cover the observed positive training examples, but also cover as much of the remaining feature space without including any negative training examples. These, if enlarged any further, include a negative training example, and hence become inconsistent. These maximal hypotheses essentially constitute a (optimistic) claim that the true concept is defined just by the negative data already observed: Thus, if a novel (never-before-seen) data point is observed, it should be assumed to be positive. (I.e., if data has not previously been ruled out, then it's ruled in.) Thus, during learning, the version space (which itself is a set – possibly infinite – containing all consistent hypotheses) can be represented by just its lower and upper bounds (maximally general and maximally specific hypothesis sets), and learning operations can be performed just on these representative sets. After learning, classification can be performed on unseen examples by testing the hypothesis learned by the algorithm. If the example is consistent with multiple hypotheses, a majority vote rule can be applied. == Historical background == The notion of version spaces was introduced by Mitchell in the early 1980s as a framework for understanding the basic problem of supervised learning within the context of solution search. Although the basic "candidate elimination" search method that accompanies the version space framework is not a popular learning algorithm, there are some practical implementations that have been developed (e.g., Sverdlik & Reynolds 1992, Hong & Tsang 1997, Dubois & Quafafou 2002). A major drawback of version space learning is its inability to deal with noise: any pair of inconsistent examples can cause the version space to collapse, i.e., become empty, so that classification becomes impossible. One solution of this problem is proposed by Dubois and Quafafou that proposed the Rough Version Space, where rough sets based approximations are used to learn certain and possible hypothesis in the presence of inconsistent data.

  Read more →
• 

  Mixture model

  In statistics, a mixture model is a probabilistic model for representing the presence of subpopulations within an overall population, without requiring that an observed data set should identify the sub-population to which an individual observation belongs. Formally a mixture model corresponds to the mixture distribution that represents the probability distribution of observations in the overall population. However, while problems associated with "mixture distributions" relate to deriving the properties of the overall population from those of the sub-populations, "mixture models" are used to make statistical inferences about the properties of the sub-populations given only observations on the pooled population, without sub-population identity information. Mixture models are used for clustering, under the name model-based clustering, and also for density estimation. Mixture models should not be confused with models for compositional data, i.e., data whose components are constrained to sum to a constant value (1, 100%, etc.). However, compositional models can be thought of as mixture models, where members of the population are sampled at random. Conversely, mixture models can be thought of as compositional models, where the total size reading population has been normalized to 1. == Structure == === General mixture model === A typical finite-dimensional mixture model is a hierarchical model consisting of the following components: N random variables that are observed, each distributed according to a mixture of K components, with the components belonging to the same parametric family of distributions (e.g., all normal, all Zipfian, etc.) but with different parameters. However, it is also possible to have a finite mixture model where each component belongs to a different parametric family of distributions, for example, a mixture of a multivariate normal distribution and a generalized hyperbolic distribution. N random latent variables specifying the identity of the mixture component of each observation, each distributed according to a K-dimensional categorical distribution A set of K mixture weights, which are probabilities that sum to 1. A set of K parameters, each specifying the parameter of the corresponding mixture component. In many cases, each "parameter" is actually a set of parameters. For example, if the mixture components are Gaussian distributions, there will be a mean and variance for each component. If the mixture components are categorical distributions (e.g., when each observation is a token from a finite alphabet of size V), there will be a vector of V probabilities summing to 1. In addition, in a Bayesian setting, the mixture weights and parameters will themselves be random variables, and prior distributions will be placed over the variables. In such a case, the weights are typically viewed as a K-dimensional random vector drawn from a Dirichlet distribution (the conjugate prior of the categorical distribution), and the parameters will be distributed according to their respective conjugate priors. Mathematically, a basic parametric mixture model can be described as follows: K = number of mixture components N = number of observations θ i = 1 … K = parameter of distribution of observation associated with component i ϕ i = 1 … K = mixture weight, i.e., prior probability of a particular component i ϕ = K -dimensional vector composed of all the individual ϕ 1 … K ; must sum to 1 z i = 1 … N = component of observation i x i = 1 … N = observation i F ( x | θ ) = probability distribution of an observation, parametrized on θ z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N | z i = 1 … N ∼ F ( θ z i ) {\displaystyle {\begin{array}{lcl}K&=&{\text{number of mixture components}}\\N&=&{\text{number of observations}}\\\theta _{i=1\dots K}&=&{\text{parameter of distribution of observation associated with component }}i\\\phi _{i=1\dots K}&=&{\text{mixture weight, i.e., prior probability of a particular component }}i\\{\boldsymbol {\phi }}&=&K{\text{-dimensional vector composed of all the individual }}\phi _{1\dots K}{\text{; must sum to 1}}\\z_{i=1\dots N}&=&{\text{component of observation }}i\\x_{i=1\dots N}&=&{\text{observation }}i\\F(x|\theta )&=&{\text{probability distribution of an observation, parametrized on }}\theta \\z_{i=1\dots N}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}|z_{i=1\dots N}&\sim &F(\theta _{z_{i}})\end{array}}} In a Bayesian setting, all parameters are associated with random variables, as follows: K , N = as above θ i = 1 … K , ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N , F ( x | θ ) = as above α = shared hyperparameter for component parameters β = shared hyperparameter for mixture weights H ( θ | α ) = prior probability distribution of component parameters, parametrized on α θ i = 1 … K ∼ H ( θ | α ) ϕ ∼ S y m m e t r i c - D i r i c h l e t K ⁡ ( β ) z i = 1 … N | ϕ ∼ Categorical ⁡ ( ϕ ) x i = 1 … N | z i = 1 … N , θ i = 1 … K ∼ F ( θ z i ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\theta _{i=1\dots K},\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N},F(x|\theta )&=&{\text{as above}}\\\alpha &=&{\text{shared hyperparameter for component parameters}}\\\beta &=&{\text{shared hyperparameter for mixture weights}}\\H(\theta |\alpha )&=&{\text{prior probability distribution of component parameters, parametrized on }}\alpha \\\theta _{i=1\dots K}&\sim &H(\theta |\alpha )\\{\boldsymbol {\phi }}&\sim &\operatorname {Symmetric-Dirichlet} _{K}(\beta )\\z_{i=1\dots N}|{\boldsymbol {\phi }}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}|z_{i=1\dots N},\theta _{i=1\dots K}&\sim &F(\theta _{z_{i}})\end{array}}} This characterization uses F and H to describe arbitrary distributions over observations and parameters, respectively. Typically H will be the conjugate prior of F. The two most common choices of F are Gaussian aka "normal" (for real-valued observations) and categorical (for discrete observations). Other common possibilities for the distribution of the mixture components are: Binomial distribution, for the number of "positive occurrences" (e.g., successes, yes votes, etc.) given a fixed number of total occurrences Multinomial distribution, similar to the binomial distribution, but for counts of multi-way occurrences (e.g., yes/no/maybe in a survey) Negative binomial distribution, for binomial-type observations but where the quantity of interest is the number of failures before a given number of successes occurs Poisson distribution, for the number of occurrences of an event in a given period of time, for an event that is characterized by a fixed rate of occurrence Exponential distribution, for the time before the next event occurs, for an event that is characterized by a fixed rate of occurrence Log-normal distribution, for positive real numbers that are assumed to grow exponentially, such as incomes or prices Multivariate normal distribution (aka multivariate Gaussian distribution), for vectors of correlated outcomes that are individually Gaussian-distributed Multivariate Student's t-distribution, for vectors of heavy-tailed correlated outcomes A vector of Bernoulli-distributed values, corresponding, e.g., to a black-and-white image, with each value representing a pixel; see the handwriting-recognition example below === Specific examples === ==== Gaussian mixture model ==== A typical non-Bayesian Gaussian mixture model looks like this: K , N = as above ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N = as above θ i = 1 … K = { μ i = 1 … K , σ i = 1 … K 2 } μ i = 1 … K = mean of component i σ i = 1 … K 2 = variance of component i z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N ∼ N ( μ z i , σ z i 2 ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N}&=&{\text{as above}}\\\theta _{i=1\dots K}&=&\{\mu _{i=1\dots K},\sigma _{i=1\dots K}^{2}\}\\\mu _{i=1\dots K}&=&{\text{mean of component }}i\\\sigma _{i=1\dots K}^{2}&=&{\text{variance of component }}i\\z_{i=1\dots N}&\sim &\operatorname {Categorical} ({\boldsymbol {\phi }})\\x_{i=1\dots N}&\sim &{\mathcal {N}}(\mu _{z_{i}},\sigma _{z_{i}}^{2})\end{array}}} A Bayesian version of a Gaussian mixture model is as follows: K , N = as above ϕ i = 1 … K , ϕ = as above z i = 1 … N , x i = 1 … N = as above θ i = 1 … K = { μ i = 1 … K , σ i = 1 … K 2 } μ i = 1 … K = mean of component i σ i = 1 … K 2 = variance of component i μ 0 , λ , ν , σ 0 2 = shared hyperparameters μ i = 1 … K ∼ N ( μ 0 , λ σ i 2 ) σ i = 1 … K 2 ∼ I n v e r s e - G a m m a ⁡ ( ν , σ 0 2 ) ϕ ∼ S y m m e t r i c - D i r i c h l e t K ⁡ ( β ) z i = 1 … N ∼ Categorical ⁡ ( ϕ ) x i = 1 … N ∼ N ( μ z i , σ z i 2 ) {\displaystyle {\begin{array}{lcl}K,N&=&{\text{as above}}\\\phi _{i=1\dots K},{\boldsymbol {\phi }}&=&{\text{as above}}\\z_{i=1\dots N},x_{i=1\dots N}&=&{\text{as above}}\\\theta _{i=1\

  Read more →
• 

  NOMINATE (scaling method)

  NOMINATE (an acronym for nominal three-step estimation) is a multidimensional scaling application developed by US political scientists Keith T. Poole and Howard Rosenthal in the early 1980s to analyze preferential and choice data, such as legislative roll-call voting behavior. In its most well-known application, members of the US Congress are placed on a two-dimensional map, with politicians who are ideologically similar (i.e. who often vote the same) being close together. One of these two dimensions corresponds to the familiar left–right political spectrum (liberal–conservative in the United States). As computing capabilities grew, Poole and Rosenthal developed multiple iterations of their NOMINATE procedure: the original D-NOMINATE method, W-NOMINATE, and most recently DW-NOMINATE (for dynamic, weighted NOMINATE). In 2009, Poole and Rosenthal were the first recipients of the Society for Political Methodology's Best Statistical Software Award for their development of NOMINATE. In 2016, the society awarded Poole its Career Achievement Award, stating that "the modern study of the U.S. Congress would be simply unthinkable without NOMINATE legislative roll call voting scores." == Procedure == The main procedure is an application of multidimensional scaling techniques to political choice data. Though there are important technical differences between these types of NOMINATE scaling procedures, all operate under the same fundamental assumptions. First, that alternative choices can be projected on a basic, low-dimensional (often two-dimensional) Euclidean space. Second, within that space, individuals have utility functions which are bell-shaped (normally distributed), and maximized at their ideal point. Because individuals also have symmetric, single-peaked utility functions which center on their ideal point, ideal points represent individuals' most preferred outcomes. That is, individuals most desire outcomes closest their ideal point, and will choose/vote probabilistically for the closest outcome. Ideal points can be recovered from observing choices, with individuals exhibiting similar preferences placed more closely than those behaving dissimilarly. It is helpful to compare this procedure to producing maps based on driving distances between cities. For example, Los Angeles is about 1,800 miles from St. Louis; St. Louis is about 1,200 miles from Miami; and Miami is about 2,700 miles from Los Angeles. From this (dis)similarities data, any map of these three cities should place Miami far from Los Angeles, with St. Louis somewhere in between (though a bit closer to Miami than Los Angeles). Just as cities like Los Angeles and San Francisco would be clustered on a map, NOMINATE places ideologically similar legislators (e.g., liberal Senators Barbara Boxer (D-Calif.) and Al Franken (D-Minn.)) closer to each other, and farther from dissimilar legislators (e.g., conservative Senator Tom Coburn (R-Okla.)) based on the degree of agreement between their roll call voting records. At the heart of the NOMINATE procedures (and other multidimensional scaling methods, such as Poole's Optimal Classification method) are algorithms they utilize to arrange individuals and choices in low dimensional (usually two-dimensional) space. Thus, NOMINATE scores provide "maps" of legislatures. Using NOMINATE procedures to study congressional roll call voting behavior from the First Congress to the present-day, Poole and Rosenthal published Congress: A Political-Economic History of Roll Call Voting in 1997 and the revised edition Ideology and Congress in 2007. In 2009, Poole and Rosenthal were named the first recipients of the Society for Political Methodology's Best Statistical Software Award for their development of NOMINATE, a recognition conferred to "individual(s) for developing statistical software that makes a significant research contribution". In 2016, Keith T. Poole was awarded the Society for Political Methodology's Career Achievement Award. The citation for this award reads, in part, "One can say perfectly correctly, and without any hyperbole: the modern study of the U.S. Congress would be simply unthinkable without NOMINATE legislative roll call voting scores. NOMINATE has produced data that entire bodies of our discipline—and many in the press—have relied on to understand the U.S. Congress." == Dimensions == Poole and Rosenthal demonstrate that—despite the many complexities of congressional representation and politics—roll call voting in both the House and the Senate can be organized and explained by no more than two dimensions throughout the sweep of American history. The first dimension (horizontal or x-axis) is the familiar left-right (or liberal-conservative) spectrum on economic matters. The second dimension (vertical or y-axis) picks up attitudes on cross-cutting, salient issues of the day (which include or have included slavery, bimetallism, civil rights, regional, and social/lifestyle issues). Rosenthal and Poole have initially argued that the first dimension refers to socio-economic matters and the second dimension to race-relations. However, the often confusing and residual nature of the second dimension has led to the second dimension being largely ignored by other researchers. For the most part, congressional voting is uni-dimensional, with most of the variation in voting patterns explained by placement along the liberal-conservative first dimension. While the first dimension of the DW-NOMINATE score is able to predict results at 83% accuracy, the addition of the second dimension only increases accuracy to 85%. Furthermore, the second dimension only provided a significant increase in accuracy for Congresses 1-99. As late as the 1990s, the second dimension was able to measure partisan splits in abortion and gun rights issues. However, a 2017 analysis found that since 1987, the votes of the US Congress had best fit a one-dimensional model, suggesting increasing party polarization after 1987. == Interpretation of nominate scores == For illustrative purposes, consider the following plots which use W-NOMINATE scores to scale members of Congress and uses the probabilistic voting model (in which legislators farther from the "cutting line" between "yea" and "nay" outcomes become more likely to vote in the predicted manner) to illustrate some major Congressional votes in the 1990s. Some of these votes, like the House's vote on President Clinton's welfare reform package (the Personal Responsibility and Work Opportunity Act of 1996) are best modeled through the use of the first (economic liberal-conservative) dimension. On the welfare reform vote, nearly all Republicans joined the moderate-conservative bloc of House Democrats in voting for the bill, while opposition was virtually confined to the most liberal Democrats in the House. The errors (those representatives on the "wrong" side of the cutting line which separates predicted "yeas" and predicted "nays") are generally close to the cutting line, which is what we would expect. A legislator directly on the cutting line is indifferent between voting "yea" and "nay" on the measure. All members are shown on the left panel of the plot, while only errors are shown on the right panel: Economic ideology also dominates the Senate vote on the Balanced Budget Amendment of 1995: On other votes, however, a second dimension (which has recently come to represent attitudes on cultural and lifestyle issues) is important. For example, roll call votes on gun control routinely split party coalitions, with socially conservative "blue dog" Democrats joining most Republicans in opposing additional regulation and socially liberal Republicans joining most Democrats in supporting gun control. The addition of the second dimension accounts for these inter-party differences, and the cutting line is more horizontal than vertical (meaning the cleavage is found on the second dimension rather than the first dimension on these votes) This pattern was evident in the 1991 House vote to require waiting periods on handguns: == Political ideology == DW-NOMINATE scores have been used widely to describe the political ideology of political actors, political parties and political institutions. For instance, a score in the first dimension that is close to either pole means that such score is located at one of the extremes in the liberal-conservative scale. So, a score closer to 1 is described as conservative whereas a score closer to −1 can be described as liberal. Finally, a score at zero or close to zero is described as moderate. == Political polarization == Poole and Rosenthal (beginning with their 1984 article "The Polarization of American Politics") have also used NOMINATE data to show that, since the 1970s, party delegations in Congress have become ideologically homogeneous and distant from one another (a phenomenon known as "polarization"). Using DW-NOMINATE scores (which permit direct comparisons between members of different Congress

  Read more →
• 

  State–action–reward–state–action

  State–action–reward–state–action (SARSA) is an algorithm for learning a Markov decision process policy, used in the reinforcement learning area of machine learning. It was proposed by Rummery and Niranjan in a technical note with the name "Modified Connectionist Q-Learning" (MCQ-L). The alternative name SARSA, proposed by Rich Sutton, was only mentioned as a footnote. This name reflects the fact that the main function for updating the Q-value depends on the current state of the agent "S1", the action the agent chooses "A1", the reward "R2" the agent gets for choosing this action, the state "S2" that the agent enters after taking that action, and finally the next action "A2" the agent chooses in its new state. The acronym for the quintuple (St, At, Rt+1, St+1, At+1) is SARSA. Some authors use a slightly different convention and write the quintuple (St, At, Rt, St+1, At+1), depending on which time step the reward is formally assigned. The rest of the article uses the former convention. == Algorithm == Q new ( S t , A t ) ← ( 1 − α ) Q ( S t , A t ) + α [ R t + 1 + γ Q ( S t + 1 , A t + 1 ) ] {\displaystyle Q^{\textrm {new}}(S_{t},A_{t})\leftarrow (1-\alpha )Q(S_{t},A_{t})+\alpha \,[R_{t+1}+\gamma \,Q(S_{t+1},A_{t+1})]} A SARSA agent interacts with the environment and updates the policy based on actions taken, hence this is known as an on-policy learning algorithm. The Q value for a state-action is updated by an error, adjusted by the learning rate α. Q values represent the possible reward received in the next time step for taking action a in state s, plus the discounted future reward received from the next state-action observation. Watkin's Q-learning updates an estimate of the optimal state-action value function Q ∗ {\displaystyle Q^{}} based on the maximum reward of available actions. While SARSA learns the Q values associated with taking the policy it follows itself, Watkin's Q-learning learns the Q values associated with taking the optimal policy while following an exploration/exploitation policy. Some optimizations of Watkin's Q-learning may be applied to SARSA. == Hyperparameters == === Learning rate (alpha) === The learning rate determines to what extent newly acquired information overrides old information. A factor of 0 will make the agent not learn anything, while a factor of 1 would make the agent consider only the most recent information. === Discount factor (gamma) === The discount factor determines the importance of future rewards. A discount factor of 0 makes the agent "opportunistic", or "myopic", e.g., by only considering current rewards, while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the Q {\displaystyle Q} values may diverge. === Initial conditions (Q(S0, A0)) === Since SARSA is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. A high (infinite) initial value, also known as "optimistic initial conditions", can encourage exploration: no matter what action takes place, the update rule causes it to have higher values than the other alternative, thus increasing their choice probability. In 2013 it was suggested that the first reward r {\displaystyle r} could be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value of Q {\displaystyle Q} . This allows immediate learning in case of fixed deterministic rewards. This resetting-of-initial-conditions (RIC) approach seems to be consistent with human behavior in repeated binary choice experiments.

  Read more →
• 

  Czekanowski distance

  The Czekanowski distance (sometimes shortened as CZD) is a per-pixel quality metric that estimates quality or similarity by measuring differences between pixels. Because it compares vectors with strictly non-negative elements, it is often used to compare colored images, as color values cannot be negative. This different approach has a better correlation with subjective quality assessment than PSNR. == Definition == Androutsos et al. give the Czekanowski coefficient as follows: d z ( i , j ) = 1 − 2 ∑ k = 1 p min ( x i k , x j k ) ∑ k = 1 p ( x i k + x j k ) {\displaystyle d_{z}(i,j)=1-{\frac {2\sum _{k=1}^{p}{\text{min}}(x_{ik},\ x_{jk})}{\sum _{k=1}^{p}(x_{ik}+x_{jk})}}} Where a pixel x i {\displaystyle x_{i}} is being compared to a pixel x j {\displaystyle x_{j}} on the k-th band of color – usually one for each of red, green and blue. For a pixel matrix of size M × N {\displaystyle M\times N} , the Czekanowski coefficient can be used in an arithmetic mean spanning all pixels to calculate the Czekanowski distance as follows: 1 M N ∑ i = 0 M − 1 ∑ j = 0 N − 1 ( 1 − 2 ∑ k = 1 3 min ( A k ( i , j ) , B k ( i , j ) ) ∑ k = 1 3 ( A k ( i , j ) + B k ( i , j ) ) ) {\displaystyle {\frac {1}{MN}}\sum _{i=0}^{M-1}\sum _{j=0}^{N-1}{\begin{pmatrix}1-{\frac {2\sum _{k=1}^{3}{\text{min}}(A_{k}(i,j),\ B_{k}(i,j))}{\sum _{k=1}^{3}(A_{k}(i,j)+B_{k}(i,j))}}\end{pmatrix}}} Where A k ( i , j ) {\displaystyle A_{k}(i,j)} is the (i, j)-th pixel of the k-th band of a color image and, similarly, B k ( i , j ) {\displaystyle B_{k}(i,j)} is the pixel that it is being compared to. == Uses == In the context of image forensics – for example, detecting if an image has been manipulated –, Rocha et al. report the Czekanowski distance is a popular choice for Color Filter Array (CFA) identification.

  Read more →
• 

  KNIME

  KNIME ( ), the Konstanz Information Miner, is a data analytics, reporting and integrating platform. KNIME integrates various components for machine learning and data mining through its modular data pipelining "Building Blocks of Analytics" concept. A graphical user interface and use of Java Database Connectivity (JDBC) allows assembly of nodes blending different data sources, including preprocessing (extract, transform, load, or ETL), for modeling, data analysis and visualization with minimal, or no, programming. It is free and open-source software released under a GNU General Public License. Since 2006, KNIME has been used in pharmaceutical research, and in other areas including customer relationship management (CRM) and data analysis, business intelligence, text mining and financial data analysis. Recently, attempts were made to use KNIME as robotic process automation (RPA) tool. KNIME's headquarters are based in Zurich, with other offices in Konstanz, Berlin, and Austin (USA). == History == Development of KNIME began in January 2004, with a team of software engineers at the University of Konstanz, as an open-source platform. The original team, headed by Michael Berthold, came from a Silicon Valley pharmaceutical industry software company. The initial goal was to create a modular, highly scalable and open data processing platform that allows easy integration of different data loading, processing, transforming, analyzing, and visual exploring modules, without focus on any one application area. The platform was intended for collaborating, research, and for integrating various other data analysis projects. In 2006, the first version of KNIME was released. Several pharmaceutical companies began using KNIME, and several life science software vendors began integrating their tools into the platform. Later that year, after an article in the German magazine c't, users from a number of other areas joined ship. As of 2012, KNIME is in use by over 15,000 actual users (i.e. not counting downloads, but users regularly retrieving updates) in the life sciences and at banks, publishers, car manufacturer, telcos, consulting firms, and various other industries, and a large number of research groups, worldwide. Latest updates to KNIME Server and KNIME Big Data Extensions, provide support for Apache Spark 2.3, Parquet and HDFS-type storage. For the sixth year in a row, KNIME has been placed as a leader for data science and machine learning platforms in Gartner's Magic Quadrant. == Design philosophy, features == These are the design principles and features that KNIME software follows: Visual, Interactive Framework: KNIME Software prioritizes a user-friendly and intuitive approach to data analysis. This is achieved through a visual and interactive framework where data flows can be combined using a drag-and-drop interface. Users can develop customized and interactive applications by creating simple to advanced and highly-automated data pipelines. These may include, for example, access to databases, machine learning libraries, logic for workflow control (e.g., loops, switches, etc.), abstraction (e.g., interactive widgets), invocation, dynamic data apps, integrated deployment, or error handling. Modularity: processing units and data containers should remain independent of each other. This design choice enables easy distribution of computation and allows for the independent development of different algorithms. Data types within KNIME are encapsulated, meaning no types are predefined. This design choice facilitates adding new data types, and integrating them with extant types, while including type-specific renderers and comparators. This principle also enables inspecting results at the end of each single data operation. Extensibility: KNIME Software is designed to be extensible. Adding new processing nodes or views is made simple through a plug-in mechanism. This mechanism ensures that users can distribute their custom functionalities without the need for complicated install or uninstall procedures. Interleaving No-Code with Code: the platform supports integrating both visual programming (no-code) and script-based programming (e.g., Python, R, JavaScript) approaches to data analysis. This design principle is termed low-code. Automation and Scalability: for example, the use of parameterization via flow variables, or the encapsulation of workflow segments in components contribute to reduce manual work and errors in analyses. Further, the scheduling of workflow execution (available in KNIME Business Hub and KNIME Community Hub for Teams) reduces dependency on human resources. In terms of scalability, a few examples include the ability to handle large datasets (millions of rows), execute multiple processes simultaneously out of the box and reuse workflow segments. Full Usability: due to the open source nature, KNIME Analytics Platform provides free full usability with no limited trial periods. == Internals == KNIME allows users to visually create data flows (or pipelines), selectively execute some or all analysis steps, and later inspect the results, models, using interactive widgets and views. KNIME is written in Java and based on Eclipse. It makes use of an extension mechanism to add plug-ins providing added functions. The core version includes hundreds of modules for data integration (file input/output (I/O), database nodes supporting all common database management systems through JDBC or native connectors: SQLite, MS-Access, SQL Server, MySQL, Oracle, PostgreSQL, Vertica and H2), data transformation (filter, converter, splitter, combiner, joiner), and the commonly used methods of statistics, data mining, analysis and text analytics. Visualization is supported with the Report Designer extension. KNIME workflows can be used as data sets to create report templates that can be exported to document formats such as doc, ppt, xls, pdf and others. Other KNIME abilities are: KNIMEs core-architecture allows processing of large data volumes that are only limited by the available hard disk space (not limited to the available RAM). E.g., KNIME allows analyzing 300 million customer addresses, 20 million cell images, and 10 million molecular structures. Added plug-ins allow integrating methods for text mining, image mining, time series analysis, and networking. KNIME integrates various other open-source projects, e.g., machine learning algorithms from Weka, H2O, Keras, Spark, the R project and LIBSVM; plotly, JFreeChart, ImageJ, and the Chemistry Development Kit. KNIME is implemented in Java, allows for wrappers calling other code, in addition to providing nodes that allow it to run Java, Python, R, Ruby and other code fragments. Since 2021, KNIME's Python Integration utilizes Anaconda for Python distribution and environment management. == License == In 2024, KNIME version 5.3 is released under the same GPLv3 license as previous versions. As of version 2.1, KNIME is released under the GPLv3 license, with an exception that allow commercial software vendors to use the well-defined node application programming interface (API) to add proprietary extensions, or wrappers calling their tools from KNIME. == Courses == KNIME allows the performance of data analysis without programming skills. Several free, online courses are provided.

  Read more →
• 

  Weka (software)

  Waikato Environment for Knowledge Analysis (Weka) is a collection of machine learning and data analysis free software licensed under the GNU General Public License. It was developed at the University of Waikato, New Zealand, and is the companion software to the book "Data Mining: Practical Machine Learning Tools and Techniques". == Description == Weka contains a collection of visualization tools and algorithms for data analysis and predictive modeling, together with graphical user interfaces for easy access to these functions. The original non-Java version of Weka was a Tcl/Tk front-end to (mostly third-party) modeling algorithms implemented in other programming languages, plus data preprocessing utilities in C, and a makefile-based system for running machine learning experiments. This original version was primarily designed as a tool for analyzing data from agricultural domains, but the more recent fully Java-based version (Weka 3), for which development started in 1997, is now used in many different application areas, in particular for educational purposes and research. Advantages of Weka include: Free availability under the GNU General Public License. Portability, since it is fully implemented in the Java programming language and thus runs on almost any modern computing platform. A comprehensive collection of data preprocessing and modeling techniques. Ease of use due to its graphical user interfaces. Weka supports several standard data mining tasks, more specifically, data preprocessing, clustering, classification, regression, visualization, and feature selection. Input to Weka is expected to be formatted according the Attribute-Relational File Format and with the filename bearing the .arff extension. All of Weka's techniques are predicated on the assumption that the data is available as one flat file or relation, where each data point is described by a fixed number of attributes (normally, numeric or nominal attributes, but some other attribute types are also supported). Weka provides access to SQL databases using Java Database Connectivity and can process the result returned by a database query. Weka provides access to deep learning with Deeplearning4j. It is not capable of multi-relational data mining, but there is separate software for converting a collection of linked database tables into a single table that is suitable for processing using Weka. Another important area that is currently not covered by the algorithms included in the Weka distribution is sequence modeling. == Extension packages == In version 3.7.2, a package manager was added to allow the easier installation of extension packages. Some functionality that used to be included with Weka prior to this version has since been moved into such extension packages, but this change also makes it easier for others to contribute extensions to Weka and to maintain the software, as this modular architecture allows independent updates of the Weka core and individual extensions. == History == In 1993, the University of Waikato in New Zealand began development of the original version of Weka, which became a mix of Tcl/Tk, C, and makefiles. In 1997, the decision was made to redevelop Weka from scratch in Java, including implementations of modeling algorithms. In 2005, Weka received the SIGKDD Data Mining and Knowledge Discovery Service Award. In 2006, Pentaho Corporation acquired an exclusive licence to use Weka for business intelligence. It forms the data mining and predictive analytics component of the Pentaho business intelligence suite. Pentaho has since been acquired by Hitachi Vantara, and Weka now underpins the PMI (Plugin for Machine Intelligence) open source component. == Related tools == Auto-WEKA is an automated machine learning system for Weka. Environment for DeveLoping KDD-Applications Supported by Index-Structures (ELKI) is a similar project to Weka with a focus on cluster analysis, i.e., unsupervised methods. H2O.ai is an open-source data science and machine learning platform KNIME is a machine learning and data mining software implemented in Java. Massive Online Analysis (MOA) is an open-source project for large scale mining of data streams, also developed at the University of Waikato in New Zealand. Neural Designer is a data mining software based on deep learning techniques written in C++. Orange is a similar open-source project for data mining, machine learning and visualization based on scikit-learn. RapidMiner is a commercial machine learning framework implemented in Java which integrates Weka. scikit-learn is a popular machine learning library in Python.

  Read more →
• 

  Mutation (evolutionary algorithm)

  Mutation is a genetic operator used to maintain genetic diversity of the chromosomes of a population of an evolutionary algorithm (EA), including genetic algorithms in particular. It is analogous to biological mutation. The classic example of a mutation operator of a binary coded genetic algorithm (GA) involves a probability that an arbitrary bit in a genetic sequence will be flipped from its original state. A common method of implementing the mutation operator involves generating a random variable for each bit in a sequence. This random variable tells whether or not a particular bit will be flipped. This mutation procedure, based on the biological point mutation, is called single point mutation. Other types of mutation operators are commonly used for representations other than binary, such as floating-point encodings or representations for combinatorial problems. The purpose of mutation in EAs is to introduce diversity into the sampled population. Mutation operators are used in an attempt to avoid local minima by preventing the population of chromosomes from becoming too similar to each other, thus slowing or even stopping convergence to the global optimum. This reasoning also leads most EAs to avoid only taking the fittest of the population in generating the next generation, but rather selecting a random (or semi-random) set with a weighting toward those that are fitter. The following requirements apply to all mutation operators used in an EA: every point in the search space must be reachable by one or more mutations. there must be no preference for parts or directions in the search space (no drift). small mutations should be more probable than large ones. For different genome types, different mutation types are suitable. Some mutations are Gaussian, Uniform, Zigzag, Scramble, Insertion, Inversion, Swap, and so on. An overview and more operators than those presented below can be found in the introductory book by Eiben and Smith or in. == Bit string mutation == The mutation of bit strings ensue through bit flips at random positions. Example: The probability of a mutation of a bit is 1 l {\displaystyle {\frac {1}{l}}} , where l {\displaystyle l} is the length of the binary vector. Thus, a mutation rate of 1 {\displaystyle 1} per mutation and individual selected for mutation is reached. == Mutation of real numbers == Many EAs, such as the evolution strategy or the real-coded genetic algorithms, work with real numbers instead of bit strings. This is due to the good experiences that have been made with this type of coding. The value of a real-valued gene can either be changed or redetermined. A mutation that implements the latter should only ever be used in conjunction with the value-changing mutations and then only with comparatively low probability, as it can lead to large changes. In practical applications, the respective value range of the decision variables to be changed of the optimisation problem to be solved is usually limited. Accordingly, the values of the associated genes are each restricted to an interval [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} . Mutations may or may not take these restrictions into account. In the latter case, suitable post-treatment is then required as described below. === Mutation without consideration of restrictions === A real number x {\displaystyle x} can be mutated using normal distribution N ( 0 , σ ) {\displaystyle {\mathcal {N}}(0,\sigma )} by adding the generated random value to the old value of the gene, resulting in the mutated value x ′ {\displaystyle x'} : x ′ = x + N ( 0 , σ ) {\displaystyle x'=x+{\mathcal {N}}(0,\sigma )} In the case of genes with a restricted range of values, it is a good idea to choose the step size of the mutation σ {\displaystyle \sigma } so that it reasonably fits the range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} of the gene to be changed, e.g.: σ = x max − x min 6 {\displaystyle \sigma ={\frac {x_{\text{max}}-x_{\text{min}}}{6}}} The step size can also be adjusted to the smaller permissible change range depending on the current value. In any case, however, it is likely that the new value x ′ {\displaystyle x'} of the gene will be outside the permissible range of values. Such a case must be considered a lethal mutation, since the obvious repair by using the respective violated limit as the new value of the gene would lead to a drift. This is because the limit value would then be selected with the entire probability of the values beyond the limit of the value range. The evolution strategy works with real numbers and mutation based on normal distribution. The step sizes are part of the chromosome and are subject to evolution together with the actual decision variables. === Mutation with consideration of restrictions === One possible form of changing the value of a gene while taking its value range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} into account is the mutation relative parameter change of the evolutionary algorithm GLEAM (General Learning Evolutionary Algorithm and Method), in which, as with the mutation presented earlier, small changes are more likely than large ones. First, an equally distributed decision is made as to whether the current value x {\displaystyle x} should be increased or decreased and then the corresponding total change interval is determined. Without loss of generality, an increase is assumed for the explanation and the total change interval is then [ x , x max ] {\displaystyle [x,x_{\max }]} . It is divided into k {\displaystyle k} sub-areas of equal size with the width δ {\displaystyle \delta } , from which k {\displaystyle k} sub-change intervals of different size are formed: i {\displaystyle i} -th sub-change interval: [ x , x + δ ⋅ i ] {\displaystyle [x,x+\delta \cdot i]} with δ = ( x max − x ) k {\displaystyle \delta ={\frac {(x_{\text{max}}-x)}{k}}} and i = 1 , … , k {\displaystyle i=1,\dots ,k} Subsequently, one of the k {\displaystyle k} sub-change intervals is selected in equal distribution and a random number, also equally distributed, is drawn from it as the new value x ′ {\displaystyle x'} of the gene. The resulting summed probabilities of the sub-change intervals result in the probability distribution of the k {\displaystyle k} sub-areas shown in the adjacent figure for the exemplary case of k = 10 {\displaystyle k=10} . This is not a normal distribution as before, but this distribution also clearly favours small changes over larger ones. This mutation for larger values of k {\displaystyle k} , such as 10, is less well suited for tasks where the optimum lies on one of the value range boundaries. This can be remedied by significantly reducing k {\displaystyle k} when a gene value approaches its limits very closely. === Common properties === For both mutation operators for real-valued numbers, the probability of an increase and decrease is independent of the current value and is 50% in each case. In addition, small changes are considerably more likely than large ones. For mixed-integer optimization problems, rounding is usually used. == Mutation of permutations == Mutations of permutations are specially designed for genomes that are themselves permutations of a set. These are often used to solve combinatorial tasks. In the two mutations presented, parts of the genome are rotated or inverted. === Rotation to the right === The presentation of the procedure is illustrated by an example on the right: === Inversion === The presentation of the procedure is illustrated by an example on the right: === Variants with preference for smaller changes === The requirement raised at the beginning for mutations, according to which small changes should be more probable than large ones, is only inadequately fulfilled by the two permutation mutations presented, since the lengths of the partial lists and the number of shift positions are determined in an equally distributed manner. However, the longer the partial list and the shift, the greater the change in gene order. This can be remedied by the following modifications. The end index j {\displaystyle j} of the partial lists is determined as the distance d {\displaystyle d} to the start index i {\displaystyle i} : j = ( i + d ) mod | P 0 | {\displaystyle j=(i+d){\bmod {\left|P_{0}\right|}}} where d {\displaystyle d} is determined randomly according to one of the two procedures for the mutation of real numbers from the interval [ 0 , | P 0 | − 1 ] {\displaystyle \left[0,\left|P_{0}\right|-1\right]} and rounded. For the rotation, k {\displaystyle k} is determined similarly to the distance d {\displaystyle d} , but the value 0 {\displaystyle 0} is forbidden. For the inversion, note that i ≠ j {\displaystyle i\neq j} must hold, so for d {\displaystyle d} the value 0 {\displaystyle 0} must be excluded.

  Read more →
• 

  Reference Software International

  Reference Software International, Inc. (RSI), was an American software developer active from 1985 to 1993 and based in Albuquerque, New Mexico, and San Francisco, California. The company released several productivity and reference software packages, including the Grammatik grammar checker, for MS-DOS. The company was acquired by WordPerfect Corporation in 1993. == History == === Background (1980–1985) === Reference Software International, Inc., was founded by Donald "Don" Emery and Bruce Wampler in 1985 in San Francisco, California. Both Wampler and Emery were college professors when they founded RSI: Wampler at the University of New Mexico as a professor of computer science and Emery a professor of marketing at San Francisco State University. After graduating from the University of Utah in around 1978, Wampler founded his first software company, Aspen Software, in Tijeras, New Mexico, in 1979. Wampler founded Aspen to develop an early spell checker software package, called Proofreader, for the TRS-80, licensing Random House's Webster's Unabridged Dictionary for the package's lexicon. In 1980, he began development on a grammar checker inspired by Writer's Workbench, a pioneering grammar checker for Unix systems. Wampler used Writer's Workbench heavily during the writer of his doctoral dissertation but disliked having to jump between the Apple II on which he composed the dissertation and the mainframe on which Writer's Workbench ran, and so wanted to develop a version of the latter for microcomputers. Wampler's work came to fruition as Grammatik in 1981, eventually ported to several other microcomputer platforms in the early 1980s. In 1983, by which point the company had 12 employees and sold a combined 80,000 units of Grammatik and Proofreader, Wampler sold Aspen to Dictronics, a software company best known for developing the Electronic Thesaurus, an early thesaurus program for microcomputers. Dictronics was in turn purchased by Wang Laboratories; according to Wampler, "Wang bought [Aspen] and sat on it. They did nothing with it". Wampler moved on to teach for the University of New Mexico, but, frustrated by Wang's inaction, got the urge to resurrect his work. In 1985, he was able to license back Grammatik and Proofreader from a small California-based software firm that had grandfathered rights to a forked version of both. In the same year, he met Emery, who, impressed by Wampler's, founded Reference Software International to market his software. RSI's research and development headquarters were based in Albuquerque, while the company's sales and marketing department was based in Walnut Creek, California. === Success (1985–1992) === In August 1985, RSI released their first product: the Random House Reference Set, a new version of Proofreader for the IBM Personal Computer and compatibles, revised to be a terminate-and-stay-resident program that ran atop other word processors such as WordStar or WordPerfect. At the time, Reference Set was the only such program on the market that functioned like this. RSI netted $114,000 from sales of Reference Set by the end of 1985. In June 1986, they released version 2.0 of Grammatik as Grammatik II for the PC. The latter was a breakout hit for RSI, receiving praise in the press (including technology journals such as PC Magazine) and RSI selling 1,000 units a month. In spring 1987, they released Reference Set II, which allowed users to import their own words into the built-in dictionary and added a thesaurus of 300,000 words. In November 1987, they released version 3.0 of Reference Set, which comprised two new field-specific dictionaries for the medical and legal professions. As well as the general Random House dictionary and thesaurus, it included Stedman's Medical Dictionary and Black's Law Dictionary. Emery consulted Paul Brest and Bob Jackson—professors of law at Stanford Law School and San Francisco State respectively—for the curation of the law dictionary; and Burton Grebin—at the time the executive director of Mount Saint Mary's Hospital—for the curation of the medical dictionary. In fall 1988, the company released Grammatik III, a total rewrite that made use of artificial intelligence to more accurately judge the grammar of sentences by breaking them down into a syntactic hierarchy. Grammatik III received universal acclaim, with Gloria Morris of InfoWorld calling it the apparent leader in the grammar checking field and Sandra Anderson of Mac Home Journal calling it "hands down ... the best of the industry" six years after its release. By 1989, the product had competitors in Correct Grammar by Lifetree Software and RightWriter by Rightsoft, Inc. By 1990, RSI achieved annual sales of $9.7 million. In the same year they released Grammatik IV, which was the first to offer direct integration with WordPerfect on both MS-DOS and Windows. In March 1992—by which point RSI had sold 1.5 million copies of Grammatik across all versions—the company released version 5 of the program, another rewrite that updated the lexicon further and added new functions such as word redundancy detection. Around the same time, the company introduced Easy Proof, a pared-down version of Grammatik intended for novice writers, students, and family computers. In 1991, the company was engaged in a trademark dispute with Systems Compatibility Corporation (SCC) of Chicago, Illinois, over the rights to the Software Toolkit title. Both companies had published software bundles bearing the name in the turn of the 1990s; SCC had published theirs first in 1988 and registered the trademark with the USPTO. SCC was granted a restraining order against RSI in January 1991. The following month, RSI agreed to rename their product, preventing a protracted legal battle. === Decline and acquisition (1992–1993) === By early 1992, RSI achieved annual sales of more than $13 million, employed 120 people, and had opened international offices in London, Belgium, and Antwerp to sell foreign versions of Reference Set and Grammatik. The company reached peak employment in the middle of 1992, with 140 employees. However, RSI's launch of six disparate titles in the year proved problematic for the company when they failed to sell as well as they had projected, and the company laid off employees by the dozens. By December 1992, only 71 employees were left, 32 from their San Francisco office. On the last day of 1992, RSI received an acquisition offer from WordPerfect Corporation, makers of the namesake word processor based in Orem, Utah. The deal was inked in January 1993, RSI's stakeholders receiving $19 million. The company's remaining employees were absorbed into WordPerfect in Orem. WordPerfect continued selling Grammatik as a standalone product for several years.

  Read more →
• 

  Recursive neural network

  A recursive neural network is a kind of deep neural network created by applying the same set of weights recursively over a structured input, to produce a structured prediction over variable-size input structures, or a scalar prediction on it, by traversing a given structure in topological order. These networks were first introduced to learn distributed representations of structure (such as logical terms), but have been successful in multiple applications, for instance in learning sequence and tree structures in natural language processing (mainly continuous representations of phrases and sentences based on word embeddings). == Architectures == === Basic === In the simplest architecture, nodes are combined into parents using a weight matrix (which is shared across the whole network) and a non-linearity such as the tanh {\displaystyle \tanh } hyperbolic function. If c 1 {\displaystyle c_{1}} and c 2 {\displaystyle c_{2}} are n {\displaystyle n} -dimensional vector representations of nodes, their parent will also be an n {\displaystyle n} -dimensional vector, defined as: p 1 , 2 = tanh ⁡ ( W [ c 1 ; c 2 ] ) {\displaystyle p_{1,2}=\tanh(W[c_{1};c_{2}])} where W {\displaystyle W} is a learned n × 2 n {\displaystyle n\times 2n} weight matrix. This architecture, with a few improvements, has been used for successfully parsing natural scenes, syntactic parsing of natural language sentences, and recursive autoencoding and generative modeling of 3D shape structures in the form of cuboid abstractions. === Recursive cascade correlation (RecCC) === RecCC is a constructive neural network approach to deal with tree domains with pioneering applications to chemistry and extension to directed acyclic graphs. === Unsupervised RNN === A framework for unsupervised RNN has been introduced in 2004. === Tensor === Recursive neural tensor networks use a single tensor-based composition function for all nodes in the tree. == Training == === Stochastic gradient descent === Typically, stochastic gradient descent (SGD) is used to train the network. The gradient is computed using backpropagation through structure (BPTS), a variant of backpropagation through time used for recurrent neural networks. == Properties == The universal approximation capability of RNNs over trees has been proved in literature. == Related models == === Recurrent neural networks === Recurrent neural networks are recursive artificial neural networks with a certain structure: that of a linear chain. Whereas recursive neural networks operate on any hierarchical structure, combining child representations into parent representations, recurrent neural networks operate on the linear progression of time, combining the previous time step and a hidden representation into the representation for the current time step. === Tree Echo State Networks === An efficient approach to implement recursive neural networks is given by the Tree Echo State Network within the reservoir computing paradigm. === Extension to graphs === Extensions to graphs include graph neural network (GNN), Neural Network for Graphs (NN4G), and more recently convolutional neural networks for graphs.

  Read more →
• 

  Shattered set

  A class of sets is said to shatter another set if it is possible to "pick out" any element of that set using intersection. The concept of shattered sets plays an important role in Vapnik–Chervonenkis theory, also known as VC-theory. Shattering and VC-theory are used in the study of empirical processes as well as in statistical computational learning theory. == Definition == Suppose A is a set and C is a class of sets. The class C shatters the set A if for each subset a of A, there is some element c of C such that a = c ∩ A . {\displaystyle a=c\cap A.} Equivalently, C shatters A when their intersection is equal to A's power set: P(A) = { c ∩ A | c ∈ C }. We employ the letter C to refer to a "class" or "collection" of sets, as in a Vapnik–Chervonenkis class (VC-class). The set A is often assumed to be finite because, in empirical processes, we are interested in the shattering of finite sets of data points. == Example == We will show that the class of all discs in the plane (two-dimensional space) does not shatter every set of four points on the unit circle, yet the class of all convex sets in the plane does shatter every finite set of points on the unit circle. Let A be a set of four points on the unit circle and let C be the class of all discs. To test where C shatters A, we attempt to draw a disc around every subset of points in A. First, we draw a disc around the subsets of each isolated point. Next, we try to draw a disc around every subset of point pairs. This turns out to be doable for adjacent points, but impossible for points on opposite sides of the circle. Any attempt to include those points on the opposite side will necessarily include other points not in that pair. Hence, any pair of opposite points cannot be isolated out of A using intersections with class C and so C does not shatter A. As visualized below: Because there is some subset which can not be isolated by any disc in C, we conclude then that A is not shattered by C. And, with a bit of thought, we can prove that no set of four points is shattered by this C. However, if we redefine C to be the class of all elliptical discs, we find that we can still isolate all the subsets from above, as well as the points that were formerly problematic. Thus, this specific set of 4 points is shattered by the class of elliptical discs. Visualized below: With a bit of thought, we could generalize that any set of finite points on a unit circle could be shattered by the class of all convex sets (visualize connecting the dots). == Shatter coefficient == To quantify the richness of a collection C of sets, we use the concept of shattering coefficients (also known as the growth function). For a collection C of sets s ⊂ Ω {\displaystyle s\subset \Omega } , Ω {\displaystyle \Omega } being any space, often a sample space, we define the nth shattering coefficient of C as S C ( n ) = max ∀ x 1 , x 2 , … , x n ∈ Ω card ⁡ { { x 1 , x 2 , … , x n } ∩ s , s ∈ C } {\displaystyle S_{C}(n)=\max _{\forall x_{1},x_{2},\dots ,x_{n}\in \Omega }\operatorname {card} \{\,\{\,x_{1},x_{2},\dots ,x_{n}\}\cap s,s\in C\}} where card {\displaystyle \operatorname {card} } denotes the cardinality of the set and x 1 , x 2 , … , x n ∈ Ω {\displaystyle x_{1},x_{2},\dots ,x_{n}\in \Omega } is any set of n points,. S C ( n ) {\displaystyle S_{C}(n)} is the largest number of subsets of any set A of n points that can be formed by intersecting A with the sets in collection C. For example, if set A contains 3 points, its power set, P ( A ) {\displaystyle P(A)} , contains 2 3 = 8 {\displaystyle 2^{3}=8} elements. If C shatters A, its shattering coefficient(3) would be 8 and S C ( 2 ) {\displaystyle S_{C}(2)} would be 2 2 = 4 {\displaystyle 2^{2}=4} . However, if one of those sets in P ( A ) {\displaystyle P(A)} cannot be obtained through intersections in c, then S C ( 3 ) {\displaystyle S_{C}(3)} would only be 7. If none of those sets can be obtained, S C ( 3 ) {\displaystyle S_{C}(3)} would be 0. Additionally, if S C ( 2 ) = 3 {\displaystyle S_{C}(2)=3} , for example, then there is an element in the set of all 2-point sets from A that cannot be obtained from intersections with C. It follows from this that S C ( 3 ) {\displaystyle S_{C}(3)} would also be less than 8 (i.e. C would not shatter A) because we have already located a "missing" set in the smaller power set of 2-point sets. This example illustrates some properties of S C ( n ) {\displaystyle S_{C}(n)} : S C ( n ) ≤ 2 n {\displaystyle S_{C}(n)\leq 2^{n}} for all n because { s ∩ A | s ∈ C } ⊆ P ( A ) {\displaystyle \{s\cap A|s\in C\}\subseteq P(A)} for any A ⊆ Ω {\displaystyle A\subseteq \Omega } . If S C ( n ) = 2 n {\displaystyle S_{C}(n)=2^{n}} , that means there is a set of cardinality n, which can be shattered by C. If S C ( N ) < 2 N {\displaystyle S_{C}(N)<2^{N}} for some N > 1 {\displaystyle N>1} then S C ( n ) < 2 n {\displaystyle S_{C}(n)<2^{n}} for all n ≥ N {\displaystyle n\geq N} . The third property means that if C cannot shatter any set of cardinality N then it can not shatter sets of larger cardinalities. == Vapnik–Chervonenkis class == If A cannot be shattered by C, there will be a smallest value of n that makes the shatter coefficient(n) less than 2 n {\displaystyle 2^{n}} because as n gets larger, there are more sets that could be missed. Alternatively, there is also a largest value of n for which the S C ( n ) {\displaystyle S_{C}(n)} is still 2 n {\displaystyle 2^{n}} , because as n gets smaller, there are fewer sets that could be omitted. The extreme of this is S C ( 0 ) {\displaystyle S_{C}(0)} (the shattering coefficient of the empty set), which must always be 2 0 = 1 {\displaystyle 2^{0}=1} . These statements lends themselves to defining the VC dimension of a class C as: V C ( C ) = min n { n : S C ( n ) < 2 n } {\displaystyle VC(C)={\underset {n}{\min }}\{n:S_{C}(n)<2^{n}\}\,} or, alternatively, as V C 0 ( C ) = max n { n : S C ( n ) = 2 n } . {\displaystyle VC_{0}(C)={\underset {n}{\max }}\{n:S_{C}(n)=2^{n}\}.\,} Note that V C ( C ) = V C 0 ( C ) + 1. {\displaystyle VC(C)=VC_{0}(C)+1.} . The VC dimension is usually defined as V C 0 {\displaystyle VC_{0}} , the largest cardinality of points chosen that will still shatter A (i.e. n such that S C ( n ) = 2 n {\displaystyle S_{C}(n)=2^{n}} ). Altneratively, if for any n there is a set of cardinality n which can be shattered by C, then S C ( n ) = 2 n {\displaystyle S_{C}(n)=2^{n}} for all n and the VC dimension of this class C is infinite. A class with finite VC dimension is called a Vapnik–Chervonenkis class or VC class. A class C is uniformly Glivenko–Cantelli if and only if it is a VC class.

  Read more →
• 

  Harrison White

  Harrison Colyar White (March 21, 1930 – May 18, 2024) was an American sociologist who was the Giddings Professor of Sociology at Columbia University. White played an influential role in the “Harvard Revolution” in social networks and the New York School of relational sociology. He is credited with the development of a number of mathematical models of social structure including vacancy chains and blockmodels. He has been a leader of a revolution in sociology that is still in process, using models of social structure that are based on patterns of relations instead of the attributes and attitudes of individuals. Among social network researchers, White is widely respected. For instance, at the 1997 International Network of Social Network Analysis conference, the organizer held a special “White Tie” event, dedicated to White. Social network researcher Emmanuel Lazega refers to him as both “Copernicus and Galileo” because he invented both the vision and the tools. The most comprehensive documentation of his theories can be found in the book Identity and Control, first published in 1992. A major rewrite of the book appeared in June 2008. In 2011, White received the W.E.B. DuBois Career of Distinguished Scholarship Award from the American Sociological Association, which honors "scholars who have shown outstanding commitment to the profession of sociology and whose cumulative work has contributed in important ways to the advancement of the discipline." Before his retirement to live in Tucson, Arizona, White was interested in sociolinguistics and business strategy as well as sociology. == Life and career == === Early years === White was born on March 21, 1930, in Washington, D.C. He had three siblings and his father was a doctor in the US Navy. Although moving around to different Naval bases throughout his adolescence, he considered himself Southern, and Nashville, TN to be his home. At the age of 15, he entered the Massachusetts Institute of Technology (MIT), receiving his undergraduate degree at 20 years of age; five years later, in 1955, he received a doctorate in theoretical physics, also from MIT with John C. Slater as his advisor. His dissertation was titled A quantum-mechanical calculation of inter-atomic force constants in copper. This was published in the Physical Review as "Atomic Force Constants of Copper from Feynman's Theorem" (1958). While at MIT he also took a course with the political scientist Karl Deutsch, who White credits with encouraging him to move toward the social sciences. === Princeton University === After receiving his PhD in theoretical physics, he received a Fellowship from the Ford Foundation to begin his second doctorate in sociology at Princeton University. His dissertation advisor was Marion J. Levy. White also worked with Wilbert Moore, Fred Stephan, and Frank W. Notestein while at Princeton. His cohort was very small, with only four or five other graduate students including David Matza, and Stanley Udy. At the same time, he took up a position as an operations analyst at the Operations Research Office, Johns Hopkins University from 1955 to 1956. During this period, he worked with Lee S. Christie on Queuing with Preemptive Priorities or with Breakdown, which was published in 1958. Christie previously worked alongside mathematical psychologist R. Duncan Luce in the Small Group Laboratory at MIT while White was completing his first PhD in physics also at MIT. While continuing his studies at Princeton, White also spent a year as a fellow at the Center for Advanced Study in the Behavioral Sciences, Stanford University, California where he met Harold Guetzkow. Guetzkow was a faculty member at the Carnegie Institute of Technology, known for his application of simulations to social behavior and long-time collaborator with many other pioneers in organization studies, including Herbert A. Simon, James March, and Richard Cyert. Upon meeting Simon through his mutual acquaintance with Guetzkow, White received an invitation to move from California to Pittsburgh to work as an assistant professor of Industrial Administration and Sociology at the Graduate School of Industrial Administration, Carnegie Institute of Technology (later Carnegie-Mellon University), where he stayed for a couple of years, between 1957 and 1959. In an interview, he claimed to have fought with the dean, Leyland Bock, to have the word "sociology" included in his title. It was also during his time at the Stanford Center for Advanced Study that White met his first wife, Cynthia A. Johnson, who was a graduate of Radcliffe College, where she had majored in art history. The couple's joint work on the French Impressionists, Canvases and Careers (1965) and “Institutional Changes in the French Painting World” (1964), originally grew out of a seminar on art in 1957 at the Center for Advanced Study led by Robert Wilson. White originally hoped to use sociometry to map the social structure of French art to predict shifts, but he had an epiphany that it was not social structure but institutional structure which explained the shift. It was also during these years that White, still a graduate student in sociology, wrote and published his first social scientific work, "Sleep: A Sociological Interpretation" in Acta Sociologica in 1960, together with Vilhelm Aubert, a Norwegian sociologist. This work was a phenomenological examination of sleep which attempted to "demonstrate that sleep was more than a straightforward biological activity... [but rather also] a social event". For his dissertation, White carried out empirical research on a research and development department in a manufacturing firm, consisting of interviews and a 110-item questionnaire with managers. He specifically used sociometric questions, which he used to model the "social structure" of relationships between various departments and teams in the organization. In May 1960 he submitted as his doctoral dissertation, titled Research and Development as a Pattern in Industrial Management: A Case Study in Institutionalisation and Uncertainty, earning a PhD in sociology from Princeton University. His first publication based on his dissertation was ''Management conflict and sociometric structure'' in the American Journal of Sociology. === University of Chicago === In 1959 James Coleman left the University of Chicago to found a new department of social relations at Johns Hopkins University, this left a vacancy open for a mathematical sociologist like White. He moved to Chicago to start working as an associate professor at the Department of Sociology. At that time, highly influential sociologists, such as Peter Blau, Mayer Zald, Elihu Katz, Everett Hughes, Erving Goffman were there. As Princeton only required one year in residence, and White took the opportunity to take positions at Johns Hopkins, Stanford, and Carnegie while still working on his dissertation, it was at Chicago that White credits as being his "real socialization in a way, into sociology." It was here that White advised his first two graduate students Joel H. Levine and Morris Friedell, both who went on to make contributions to social network analysis in sociology. While at the Center for Advanced Study, White began learning anthropology and became fascinated with kinship. During his stay at the University of Chicago White was able to finish An Anatomy of Kinship, published in 1963 within the Prentice-Hall series in Mathematical Analysis of Social Behavior, with James Coleman and James March as chief editors. The book received significant attention from many mathematical sociologists of the time, and contributed greatly to establish White as a model builder. === The Harvard Revolution === In 1963, White left Chicago to be an associate professor of sociology at the Harvard Department of Social Relations—the same department founded by Talcott Parsons and still heavily influenced by the structural-functionalist paradigm of Parsons. As White previously only taught graduate courses at Carnegie and Chicago, his first undergraduate course was An Introduction to Social Relations (see Influence) at Harvard, which became infamous among network analysts. As he "thought existing textbooks were grotesquely unscientific," the syllabus of the class was noted for including few readings by sociologists, and comparatively more readings by anthropologists, social psychologists, and historians. White was also a vocal critic of what he called the "attributes and attitudes" approach of Parsonsian sociology, and came to be the leader of what has been variously known as the “Harvard Revolution," the "Harvard breakthrough," or the "Harvard renaissance" in social networks. He worked closely with small group researchers George C. Homans and Robert F. Bales, which was largely compatible with his prior work in organizational research and his efforts to formalize network analysis. Overlapping White's early years, Charles Tilly, a graduate of the Harvard Department of Social

  Read more →
• 

  Ave!Comics

  Ave!Comics Production is a privately owned French company editing comics on smartphones, tablets and computers. It was founded in 2008 and it is a subsidiary of Aquafadas, a software development company in digital publishing owned by Kobo Inc. AveComics is a comic book store for digital comic books that can be used on computers, tablets, and smartphones.(iOS, Android) Readers can buy and read comic books, manga and graphic novels in French, English and Spanish. AveComics uses a technology created by Aquafadas for comics transformation, distribution and reading, based around its AVE format. The AveComics application was also a finalist in the BlackBerry Innovation Awards 2009, in the "Entertainment" category. == Company history == Aquafadas, a company working on creative software for Flash, HTML5, photo, and video editing, created the application MyComics to allow the reading of comics on mobile in 2006. This application was made available in 2008, to enable the reading and storing of comics on iPhone and iPod Touch. A reading system adapted to low resolution screens was also available. In October of the same year, the company launched a comics library on both devices, in partnership with the Angoulême International Comics Festival, Fnac and SNCF. This library included the official selection of the festival, and was downloaded over 150 000 times. In December 2008 "The Adventures of Lucky Luke n°3", at Lucky Comics was published on both devices. The comic made a 50 000 € turnover. In April 2009, "Les Blondes" 10th volume was the top-selling comic for 10 months on the AppStore. After, in August 2009, the AveComics application was launched on iPhone, iPod Touch and BlackBerry. The company's website was launched in September when more than 100 titles were available on smartphones and computers. == Catalogue == AveComics works with over 80 international publishers including Glénat, Marsu Productions, Delcourt, Casterman, Soleil, Ubisoft, Les Humanoïdes Associés and Mad Fabrik. Comics such as "Assassin's Creed", "Talisman", "Titeuf", and "Seoul District" are sold by the company. == Award == Grand Prix Software Venture Capital - Senate 2008.

  Read more →
• 

  Quadratic unconstrained binary optimization

  Quadratic unconstrained binary optimization (QUBO), also known as unconstrained binary quadratic programming (UBQP), is a combinatorial optimization problem with a wide range of applications from finance and economics to machine learning. QUBO is an NP hard problem, and for many classical problems from theoretical computer science, like maximum cut, graph coloring and the partition problem, embeddings into QUBO have been formulated. Embeddings for machine learning models include support-vector machines, clustering and probabilistic graphical models. Moreover, due to its close connection to Ising models, QUBO constitutes a central problem class for adiabatic quantum computation, where it is solved through a physical process called quantum annealing. == Definition == Let B = { 0 , 1 } {\displaystyle \mathbb {B} =\lbrace 0,1\rbrace } the set of binary digits (or bits), then B n {\displaystyle \mathbb {B} ^{n}} is the set of binary vectors of fixed length n ∈ N {\displaystyle n\in \mathbb {N} } . Given a symmetric or upper triangular matrix Q ∈ R n × n {\displaystyle {\boldsymbol {Q}}\in \mathbb {R} ^{n\times n}} , whose entries Q i j {\displaystyle Q_{ij}} define a weight for each pair of indices i , j ∈ { 1 , … , n } {\displaystyle i,j\in \lbrace 1,\dots ,n\rbrace } , we can define the function f Q : B n → R {\displaystyle f_{\boldsymbol {Q}}:\mathbb {B} ^{n}\rightarrow \mathbb {R} } that assigns a value to each binary vector x {\displaystyle {\boldsymbol {x}}} through f Q ( x ) = x ⊺ Q x = ∑ i = 1 n ∑ j = 1 n Q i j x i x j . {\displaystyle f_{\boldsymbol {Q}}({\boldsymbol {x}})={\boldsymbol {x}}^{\intercal }{\boldsymbol {Qx}}=\sum _{i=1}^{n}\sum _{j=1}^{n}Q_{ij}x_{i}x_{j}.} Alternatively, the linear and quadratic parts can be separated as f Q ′ , q ( x ) = x ⊺ Q ′ x + q ⊺ x , {\displaystyle f_{{\boldsymbol {Q}}',{\boldsymbol {q}}}({\boldsymbol {x}})={\boldsymbol {x}}^{\intercal }{\boldsymbol {Q}}'{\boldsymbol {x}}+{\boldsymbol {q}}^{\intercal }{\boldsymbol {x}},} where Q ′ ∈ R n × n {\displaystyle {\boldsymbol {Q}}'\in \mathbb {R} ^{n\times n}} and q ∈ R n {\displaystyle {\boldsymbol {q}}\in \mathbb {R} ^{n}} . This is equivalent to the previous definition through Q = Q ′ + diag ⁡ [ q ] {\displaystyle {\boldsymbol {Q}}={\boldsymbol {Q}}'+\operatorname {diag} [{\boldsymbol {q}}]} using the diag operator, exploiting that x = x ⋅ x {\displaystyle x=x\cdot x} for all binary values x {\displaystyle x} . Intuitively, the weight Q i j {\displaystyle Q_{ij}} is added if both x i = 1 {\displaystyle x_{i}=1} and x j = 1 {\displaystyle x_{j}=1} . The QUBO problem consists of finding a binary vector x ∗ {\displaystyle {\boldsymbol {x}}^{}} that minimizes f Q {\displaystyle f_{\boldsymbol {Q}}} , i.e., ∀ x ∈ B n : f Q ( x ∗ ) ≤ f Q ( x ) {\displaystyle \forall {\boldsymbol {x}}\in \mathbb {B} ^{n}:~f_{\boldsymbol {Q}}({\boldsymbol {x}}^{})\leq f_{\boldsymbol {Q}}({\boldsymbol {x}})} . In general, x ∗ {\displaystyle {\boldsymbol {x}}^{}} is not unique, meaning there may be a set of minimizing vectors with equal value w.r.t. f Q {\displaystyle f_{\boldsymbol {Q}}} . The complexity of QUBO arises from the number of candidate binary vectors to be evaluated, as | B n | = 2 n {\displaystyle \left|\mathbb {B} ^{n}\right|=2^{n}} grows exponentially in n {\displaystyle n} . Sometimes, QUBO is defined as the problem of maximizing f Q {\displaystyle f_{\boldsymbol {Q}}} , which is equivalent to minimizing f − Q = − f Q {\displaystyle f_{-{\boldsymbol {Q}}}=-f_{\boldsymbol {Q}}} . == Properties == QUBO is scale invariant for positive factors α > 0 {\displaystyle \alpha >0} , which leave the optimum x ∗ {\displaystyle {\boldsymbol {x}}^{}} unchanged: f α Q ( x ) = x ⊺ ( α Q ) x = α ( x ⊺ Q x ) = α f Q ( x ) {\displaystyle f_{\alpha {\boldsymbol {Q}}}({\boldsymbol {x}})={\boldsymbol {x}}^{\intercal }(\alpha {\boldsymbol {Q}}){\boldsymbol {x}}=\alpha ({\boldsymbol {x}}^{\intercal }{\boldsymbol {Qx}})=\alpha f_{\boldsymbol {Q}}({\boldsymbol {x}})} . In its general form, QUBO is NP-hard and cannot be solved efficiently by any known polynomial-time algorithm. However, there are polynomially-solvable special cases, where Q {\displaystyle {\boldsymbol {Q}}} has certain properties, for example: If all coefficients are positive, the optimum is trivially x ∗ = ( 0 , … , 0 ) ⊺ {\displaystyle {\boldsymbol {x}}^{}=(0,\dots ,0)^{\intercal }} . Similarly, if all coefficients are negative, the optimum is x ∗ = ( 1 , … , 1 ) ⊺ {\displaystyle {\boldsymbol {x}}^{}=(1,\dots ,1)^{\intercal }} . If Q {\displaystyle {\boldsymbol {Q}}} is diagonal, the bits can be optimized independently, and the problem is solvable in O ( n ) {\displaystyle {\mathcal {O}}(n)} . The optimal variable assignments are simply x i ∗ = 1 {\displaystyle x_{i}^{}=1} if Q i i < 0 {\displaystyle Q_{ii}<0} , and x i ∗ = 0 {\displaystyle x_{i}^{}=0} otherwise. If all off-diagonal elements of Q {\displaystyle {\boldsymbol {Q}}} are non-positive, the corresponding QUBO problem is solvable in polynomial time. QUBO can be solved using integer linear programming solvers like CPLEX or Gurobi Optimizer. This is possible since QUBO can be reformulated as a linear constrained binary optimization problem. To achieve this, substitute the product x i x j {\displaystyle x_{i}x_{j}} by an additional binary variable z i j ∈ B {\displaystyle z_{ij}\in \mathbb {B} } and add the constraints x i ≥ z i j {\displaystyle x_{i}\geq z_{ij}} , x j ≥ z i j {\displaystyle x_{j}\geq z_{ij}} and x i + x j − 1 ≤ z i j {\displaystyle x_{i}+x_{j}-1\leq z_{ij}} . Note that z i j {\displaystyle z_{ij}} can also be relaxed to continuous variables within the bounds zero and one. == Applications == QUBO is a structurally simple, yet computationally hard optimization problem. It can be used to encode a wide range of optimization problems from various scientific areas. === Maximum Cut === Given a graph G = ( V , E ) {\displaystyle G=(V,E)} with vertex set V = { 1 , … , n } {\displaystyle V=\lbrace 1,\dots ,n\rbrace } and edges E ⊆ V × V {\displaystyle E\subseteq V\times V} , the maximum cut (max-cut) problem consists of finding two subsets S , T ⊆ V {\displaystyle S,T\subseteq V} with T = V ∖ S {\displaystyle T=V\setminus S} , such that the number of edges between S {\displaystyle S} and T {\displaystyle T} is maximized. The more general weighted max-cut problem assumes edge weights w i j ≥ 0 ∀ i , j ∈ V {\displaystyle w_{ij}\geq 0~\forall i,j\in V} , with ( i , j ) ∉ E ⇒ w i j = 0 {\displaystyle (i,j)\notin E\Rightarrow w_{ij}=0} , and asks for a partition S , T ⊆ V {\displaystyle S,T\subseteq V} that maximizes the sum of edge weights between S {\displaystyle S} and T {\displaystyle T} , i.e., max S ⊆ V ∑ i ∈ S , j ∉ S w i j . {\displaystyle \max _{S\subseteq V}\sum _{i\in S,j\notin S}w_{ij}.} By setting w i j = 1 {\displaystyle w_{ij}=1} for all ( i , j ) ∈ E {\displaystyle (i,j)\in E} this becomes equivalent to the original max-cut problem above, which is why we focus on this more general form in the following. For every vertex in i ∈ V {\displaystyle i\in V} we introduce a binary variable x i {\displaystyle x_{i}} with the interpretation x i = 0 {\displaystyle x_{i}=0} if i ∈ S {\displaystyle i\in S} and x i = 1 {\displaystyle x_{i}=1} if i ∈ T {\displaystyle i\in T} . As T = V ∖ S {\displaystyle T=V\setminus S} , every i {\displaystyle i} is in exactly one set, meaning there is a 1:1 correspondence between binary vectors x ∈ B n {\displaystyle {\boldsymbol {x}}\in \mathbb {B} ^{n}} and partitions of V {\displaystyle V} into two subsets. We observe that, for any i , j ∈ V {\displaystyle i,j\in V} , the expression x i ( 1 − x j ) + ( 1 − x i ) x j {\displaystyle x_{i}(1-x_{j})+(1-x_{i})x_{j}} evaluates to 1 if and only if i {\displaystyle i} and j {\displaystyle j} are in different subsets, equivalent to logical XOR. Let W ∈ R + n × n {\displaystyle {\boldsymbol {W}}\in \mathbb {R} _{+}^{n\times n}} with W i j = w i j ∀ i , j ∈ V {\displaystyle W_{ij}=w_{ij}~\forall i,j\in V} . By extending above expression to matrix-vector form we find that x ⊺ W ( 1 − x ) + ( 1 − x ) ⊺ W x = − 2 x ⊺ W x + ( W 1 + W ⊺ 1 ) ⊺ x {\displaystyle {\boldsymbol {x}}^{\intercal }{\boldsymbol {W}}({\boldsymbol {1}}-{\boldsymbol {x}})+({\boldsymbol {1}}-{\boldsymbol {x}})^{\intercal }{\boldsymbol {Wx}}=-2{\boldsymbol {x}}^{\intercal }{\boldsymbol {Wx}}+({\boldsymbol {W1}}+{\boldsymbol {W}}^{\intercal }{\boldsymbol {1}})^{\intercal }{\boldsymbol {x}}} is the sum of weights of all edges between S {\displaystyle S} and T {\displaystyle T} , where 1 = ( 1 , 1 , … , 1 ) ⊺ ∈ R n {\displaystyle {\boldsymbol {1}}=(1,1,\dots ,1)^{\intercal }\in \mathbb {R} ^{n}} . As this is a quadratic function over x {\displaystyle {\boldsymbol {x}}} , it is a QUBO problem whose parameter matrix we can read from above expression as Q = 2 W − diag ⁡ [ W 1 + W ⊺ 1 ] , {\displaystyle {\boldsymbol {Q}}=2{\boldsymbol {W}}-\operatorname {diag} [{\boldsymbol {W1}}+{\boldsymbol {W}}^{\intercal }{\bol

  Read more →
• 

  Winner-take-all (computing)

  Winner-take-all is a computational principle applied in computational models of neural networks by which neurons compete with each other for activation. In the classical form, only the neuron with the highest activation stays active while all other neurons shut down; however, other variations allow more than one neuron to be active, for example the soft winner take-all, by which a power function is applied to the neurons. == Neural networks == In the theory of artificial neural networks, winner-take-all networks are a case of competitive learning in recurrent neural networks. Output nodes in the network mutually inhibit each other, while simultaneously activating themselves through reflexive connections. After some time, only one node in the output layer will be active, namely the one corresponding to the strongest input. Thus the network uses nonlinear inhibition to pick out the largest of a set of inputs. Winner-take-all is a general computational primitive that can be implemented using different types of neural network models, including both continuous-time and spiking networks. Winner-take-all networks are commonly used in computational models of the brain, particularly for distributed decision-making or action selection in the cortex. Important examples include hierarchical models of vision, and models of selective attention and recognition. They are also common in artificial neural networks and neuromorphic analog VLSI circuits. It has been formally proven that the winner-take-all operation is computationally powerful compared to other nonlinear operations, such as thresholding. In many practical cases, there is not only one single neuron which becomes active but there are exactly k neurons which become active for a fixed number k. This principle is referred to as k-winners-take-all. === Example algorithm === Consider a single linear neuron, with inputs x 1 , … , x n {\displaystyle x_{1},\dots ,x_{n}} . Each input has weight w i {\displaystyle w_{i}} , and the output of the neuron is ∑ i w i x i {\displaystyle \sum _{i}w_{i}x_{i}} . In the Instar learning rule, on each input vector, the weight vectors are modified according to Δ w i = η ( x i − w i ) {\displaystyle \Delta w_{i}=\eta (x_{i}-w_{i})} where η {\displaystyle \eta } is the learning rate. This rule is unsupervised, since we need just the input vector, not a reference output. Now, consider multiple linear neurons y 1 , … , y m {\displaystyle y_{1},\dots ,y_{m}} . The output of each satisfies y i = ∑ j w i j x j {\displaystyle y_{i}=\sum _{j}w_{ij}x_{j}} . In the winner-take-all algorithm, the weights are modified as follows. Given an input vector x {\displaystyle x} , each output is computed. The neuron with the largest output is selected, and the weights going into that neuron are modified according to the Instar learning rule. All other weights remain unchanged. The k-winners-take-all rule is similar, except that the Instar learning rule is applied to the weights going into the k neurons with the largest outputs. == Circuit example == A simple, but popular CMOS winner-take-all circuit is shown on the right. This circuit was originally proposed by Lazzaro et al. (1989) using MOS transistors biased to operate in the weak-inversion or subthreshold regime. In the particular case shown there are only two inputs (IIN,1 and IIN,2), but the circuit can be easily extended to multiple inputs in a straightforward way. It operates on continuous-time input signals (currents) in parallel, using only two transistors per input. In addition, the bias current IBIAS is set by a single global transistor that is common to all the inputs. The largest of the input currents sets the common potential VC. As a result, the corresponding output carries almost all the bias current, while the other outputs have currents that are close to zero. Thus, the circuit selects the larger of the two input currents, i.e., if IIN,1 > IIN,2, we get IOUT,1 = IBIAS and IOUT,2 = 0. Similarly, if IIN,2 > IIN,1, we get IOUT,1 = 0 and IOUT,2 = IBIAS. A SPICE-based DC simulation of the CMOS winner-take-all circuit in the two-input case is shown on the right. As shown in the top subplot, the input IIN,1 was fixed at 6nA, while IIN,2 was linearly increased from 0 to 10nA. The bottom subplot shows the two output currents. As expected, the output corresponding to the larger of the two inputs carries the entire bias current (10nA in this case), forcing the other output current nearly to zero. == Other uses == In stereo matching algorithms, following the taxonomy proposed by Scharstein and Szelliski, winner-take-all is a local method for disparity computation. Adopting a winner-take-all strategy, the disparity associated with the minimum or maximum cost value is selected at each pixel. It is axiomatic that in the electronic commerce market, early dominant players such as AOL or Yahoo! get most of the rewards. By 1998, one study found the top 5% of all web sites garnered more than 74% of all traffic. The winner-take-all hypothesis in economics suggests that once a technology or a firm gets ahead, it will do better and better over time, whereas lagging technology and firms will fall further behind. See First-mover advantage.

  Read more →