AI Analytics Data

AI Analytics Data — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Semantic space

  Semantic spaces in the natural language domain aim to create representations of natural language that are capable of capturing meaning. The original motivation for semantic spaces stems from two core challenges of natural language: Vocabulary mismatch (the fact that the same meaning can be expressed in many ways) and ambiguity of natural language (the fact that the same term can have several meanings). The application of semantic spaces in natural language processing (NLP) aims at overcoming limitations of rule-based or model-based approaches operating on the keyword level. The main drawback with these approaches is their brittleness, and the large manual effort required to create either rule-based NLP systems or training corpora for model learning. Rule-based and machine learning based models are fixed on the keyword level and break down if the vocabulary differs from that defined in the rules or from the training material used for the statistical models. Research in semantic spaces dates back more than 20 years. In 1996, two papers were published that raised a lot of attention around the general idea of creating semantic spaces: latent semantic analysis and Hyperspace Analogue to Language. However, their adoption was limited by the large computational effort required to construct and use those semantic spaces. A breakthrough with regard to the accuracy of modelling associative relations between words (e.g. "spider-web", "lighter-cigarette", as opposed to synonymous relations such as "whale-dolphin", "astronaut-driver") was achieved by explicit semantic analysis (ESA) in 2007. ESA was a novel (non-machine learning) based approach that represented words in the form of vectors with 100,000 dimensions (where each dimension represents an Article in Wikipedia). However practical applications of the approach are limited due to the large number of required dimensions in the vectors. More recently, advances in neural network techniques in combination with other new approaches (tensors) led to a host of new recent developments: Word2vec from Google, GloVe from Stanford University, and fastText from Facebook AI Research (FAIR) labs.

  Read more →
• 

  Arattai

  Arattai Messenger (or simply Arattai) is an encrypted messaging service for instant messaging, voice calls, and video calls, developed by Zoho Corporation. The name Arattai means "chat" or "conversation" in Tamil. The app was soft-launched in January 2021. The app saw a sharp surge in downloads in September 2025, partially fueled by endorsements from Indian government officials. However, the app dropped from the top rankings in October 2025. == History == Arattai was initially tested internally among Zoho employees before being released publicly in early 2021. The launch coincided with a surge in interest for privacy-focused and messaging services, triggered by concerns over WhatsApp's updated terms of service. In September 2025, Arattai experienced a major surge in adoption, with daily sign-ups reportedly increasing 100-fold, from around 3,000 to more than 350,000 in three days. The surge in downloads was attributed to Zoho products being promoted by Indian government officials as part of their Make in India push for homegrown alternatives to foreign‐owned apps, amid deteriorating India–US relations. The growth temporarily strained Zoho's infrastructure, prompting rapid scaling of servers and capacity expansion. During the same period, the app reached the top position in Apple's App Store charts for the "Social Networking" category in India. The app dropped from the top ranking in late October 2025. == Reception == At launch, Arattai was positioned as a potential domestic rival to WhatsApp in India, but analysts noted that it faced challenges with encryption, ecosystem, and network effect. Critics pointed to occasional sync delays.

  Read more →
• 

  Human–robot interaction

  Human–robot interaction (HRI) is the study of interactions between humans and robots. Human–robot interaction is a multidisciplinary field with contributions from human–computer interaction, artificial intelligence, robotics, natural language processing, design, psychology and philosophy. A subfield known as physical human–robot interaction (pHRI) has tended to focus on device design to enable people to safely interact with robotic systems. == Origins == Human–robot interaction has been a topic of both science fiction and academic speculation even before any robots existed. Because much of active HRI development depends on natural language processing, many aspects of HRI are continuations of human communications, a field of research which is much older than robotics. The origin of HRI as a discrete problem was stated by 20th-century author Isaac Asimov in 1941, in his novel I, Robot. Asimov coined Three Laws of Robotics, namely: A robot may not injure a human being or, through inaction, allow a human being to come to harm. A robot must obey the orders given it by human beings except where such orders would conflict with the First Law. A robot must protect its own existence as long as such protection does not conflict with the First or Second Laws. These three laws provide an overview of the goals engineers and researchers hold for safety in the HRI field, although the fields of robot ethics and machine ethics are more complex than these three principles. However, generally human–robot interaction prioritizes the safety of humans that interact with potentially dangerous robotics equipment. Solutions to this problem range from the philosophical approach of treating robots as ethical agents (individuals with moral agency), to the practical approach of creating safety zones. These safety zones use technologies such as lidar to detect human presence or physical barriers to protect humans by preventing any contact between machine and operator. Although initially robots in the human–robot interaction field required some human intervention to function, research has expanded this to the extent that fully autonomous systems are now far more common than in the early 2000s. Autonomous systems include from simultaneous localization and mapping systems which provide intelligent robot movement to natural-language processing and natural-language generation systems which allow for natural, human-esque interaction which meet well-defined psychological benchmarks. Anthropomorphic robots (machines which imitate human body structure) are better described by the biomimetics field, but overlap with HRI in many research applications. Examples of robots which demonstrate this trend include Willow Garage's PR2 robot, the NASA Robonaut, and Honda ASIMO. However, robots in the human–robot interaction field are not limited to human-like robots: Paro and Kismet are both robots designed to elicit emotional response from humans, and so fall into the category of human–robot interaction. Goals in HRI range from industrial manufacturing through Cobots, medical technology through rehabilitation, autism intervention, and elder care devices, entertainment, human augmentation, and human convenience. Future research therefore covers a wide range of fields, much of which focuses on assistive robotics, robot-assisted search-and-rescue, and space exploration. == The goal of friendly human–robot interactions == Robots are artificial agents with capacities of perception and action in the physical world often referred by researchers as workspace. Their use has been generalized in factories but nowadays they tend to be found in the most technologically advanced societies in such critical domains as search and rescue, military battle, mine and bomb detection, scientific exploration, law enforcement, entertainment and hospital care. These new domains of applications imply a closer interaction with the user, sharing the workspace but also goals in terms of task achievement. The subfield of physical human–robot interaction (pHRI) has largely focused on device design to enable people to safely interact with robotic systems but is increasingly developing algorithmic approaches in an attempt to support fluent and expressive interactions between humans and robotic systems. With the advance in AI, the research is focusing on one part towards the safest physical interaction but also on a socially correct interaction, dependent on cultural criteria. The goal is to build an intuitive, and easy communication with the robot through speech, gestures, and facial expressions. Kerstin Dautenhahn refers to friendly Human–robot interaction as "Robotiquette" defining it as the "social rules for robot behaviour (a 'robotiquette') that is comfortable and acceptable to humans" The robot has to adapt itself to our way of expressing desires and orders and not the contrary. But every day environments such as homes have much more complex social rules than those implied by factories or even military environments. Thus, the robot needs perceiving and understanding capacities to build dynamic models of its surroundings. It needs to categorize objects, recognize and locate humans and further recognize their emotions. The need for dynamic capacities pushes forward every sub-field of robotics. Furthermore, by understanding and perceiving social cues, robots can enable collaborative scenarios with humans. For example, with the rapid rise of personal fabrication machines such as desktop 3D printers, laser cutters, etc., entering our homes, scenarios may arise where robots can collaboratively share control, co-ordinate and achieve tasks together. Industrial robots have already been integrated into industrial assembly lines and are collaboratively working with humans. The social impact of such robots have been studied and has indicated that workers still treat robots and social entities, rely on social cues to understand and work together. On the other end of HRI research the cognitive modelling of the "relationship" between human and the robots benefits the psychologists and robotic researchers the user study are often of interests on both sides. This research endeavours part of human society. For effective human – humanoid robot interaction numerous communication skills and related features should be implemented in the design of such artificial agents/systems. == General HRI research == HRI research spans a wide range of fields, some general to the nature of HRI. === Methods for perceiving humans === Methods for perceiving humans in the environment are based on sensor information. Research on sensing components and software led by Microsoft provide useful results for extracting the human kinematics (see Kinect). An example of older technique is to use colour information for example the fact that for light skinned people the hands are lighter than the clothes worn. In any case a human modelled a priori can then be fitted to the sensor data. The robot builds or has (depending on the level of autonomy the robot has) a 3D mapping of its surroundings to which is assigned the humans locations. Most methods intend to build a 3D model through vision of the environment. The proprioception sensors permit the robot to have information over its own state. This information is relative to a reference. Theories of proxemics may be used to perceive and plan around a person's personal space. A speech recognition system is used to interpret human desires or commands. By combining the information inferred by proprioception, sensor and speech the human position and state (standing, seated). In this matter, natural-language processing is concerned with the interactions between computers and human (natural) languages, in particular how to program computers to process and analyze large amounts of natural-language data. For instance, neural-network architectures and learning algorithms that can be applied to various natural-language processing tasks including part-of-speech tagging, chunking, named-entity recognition, and semantic role labeling. === Methods for motion planning === Motion planning in dynamic environments is a challenge that can at the moment only be achieved for robots with 3 to 10 degrees of freedom. Humanoid robots or even 2 armed robots, which can have up to 40 degrees of freedom, are unsuited for dynamic environments with today's technology. However lower-dimensional robots can use the potential field method to compute trajectories which avoid collisions with humans. === Cognitive models and theory of mind === Humans exhibit negative social and emotional responses as well as decreased trust toward some robots that closely, but imperfectly, resemble humans; this phenomenon has been termed the "Uncanny Valley". However recent research in telepresence robots has established that mimicking human body postures and expressive gestures has made the robots likeable and engaging in a remote setting. Further, the presence o

  Read more →
• 

  Single particle analysis

  Single particle analysis is a group of related computerized image processing techniques used to analyze images from transmission electron microscopy (TEM). These methods were developed to improve and extend the information obtainable from TEM images of particulate samples, typically proteins or other large biological entities such as viruses. Individual images of stained or unstained particles are very noisy, making interpretation difficult. Combining several digitized images of similar particles together gives an image with stronger and more easily interpretable features. An extension of this technique uses single particle methods to build up a three-dimensional reconstruction of the particle. Using cryo-electron microscopy it has become possible to generate reconstructions with sub-nanometer, near-atomic resolution resolution first in the case of highly symmetric viruses, and now in smaller, asymmetric proteins as well. == Techniques == Single particle analysis can be done on both negatively stained and vitreous ice-embedded transmission electron cryomicroscopy (CryoTEM) samples. Single particle analysis methods are, in general, reliant on the sample being homogeneous, although techniques for dealing with conformational heterogeneity are being developed. Images (micrographs) are taken with an electron microscope using charged-coupled device (CCD) detectors coupled to a phosphorescent layer (in the past, they were instead collected on film and digitized using high-quality scanners). The image processing is carried out using specialized software programs, often run on multi-processor computer clusters. Depending on the sample or the desired results, various steps of two- or three-dimensional processing can be done. === Alignment and classification === Biological samples, and especially samples embedded in thin vitreous ice, are highly radiation sensitive, thus only low electron doses can be used to image the sample. This low dose, as well as variations in the metal stain used (if used) means images have high noise relative to the signal given by the particle being observed. By aligning several similar images to each other so they are in register and then averaging them, an image with higher signal-to-noise ratio can be obtained. As the noise is mostly randomly distributed and the underlying image features constant, by averaging the intensity of each pixel over several images only the constant features are reinforced. Typically, the optimal alignment (a translation and an in-plane rotation) to map one image onto another is calculated by cross-correlation. However, a micrograph often contains particles in multiple different orientations and/or conformations, and so to get more representative image averages, a method is required to group similar particle images together into multiple sets. This is normally carried out using one of several data analysis and image classification algorithms, such as multi-variate statistical analysis and hierarchical ascendant classification, or k-means clustering. Often data sets of tens of thousands of particle images are used, and to reach an optimal solution an iterative procedure of alignment and classification is used, whereby strong image averages produced by classification are used as reference images for a subsequent alignment of the whole data set. === Image filtering === Image filtering (band-pass filtering) is often used to reduce the influence of high and/or low spatial frequency information in the images, which can affect the results of the alignment and classification procedures. This is particularly useful in negative stain images. The algorithms make use of fast Fourier transforms (FFT), often employing Gaussian shaped soft-edged masks in reciprocal space to suppress certain frequency ranges. High-pass filters remove low spatial frequencies (such as ramp or gradient effects), leaving the higher frequencies intact. Low-pass filters remove high spatial frequency features and have a blurring effect on fine details. === Contrast transfer function === Due to the nature of image formation in the electron microscope, bright-field TEM images are obtained using significant underfocus. This, along with features inherent in the microscope's lens system, creates blurring of the collected images visible as a point spread function. The combined effects of the imaging conditions are known as the contrast transfer function (CTF), and can be approximated mathematically as a function in reciprocal space. Specialized image processing techniques such as phase flipping and amplitude correction / Wiener filtering can (at least partially) correct for the CTF, and allow high resolution reconstructions. === Three-dimensional reconstruction === Transmission electron microscopy images are projections of the object showing the distribution of density through the object, similar to medical X-rays. By making use of the projection-slice theorem a three-dimensional reconstruction of the object can be generated by combining many images (2D projections) of the object taken from a range of viewing angles. Proteins in vitreous ice ideally adopt a random distribution of orientations (or viewing angles), allowing a fairly isotropic reconstruction if a large number of particle images are used. This contrasts with electron tomography, where the viewing angles are limited due to the geometry of the sample/imaging set up, giving an anisotropic reconstruction. Filtered back projection is a commonly used method of generating 3D reconstructions in single particle analysis, although many alternative algorithms exist. Before a reconstruction can be made, the orientation of the object in each image needs to be estimated. Several methods have been developed to work out the relative Euler angles of each image. Some are based on common lines (common 1D projections and sinograms), others use iterative projection matching algorithms. The latter works by beginning with a simple, low resolution 3D starting model and compares the experimental images to projections of the model and creates a new 3D to bootstrap towards a solution. Methods are also available for making 3D reconstructions of helical samples (such as tobacco mosaic virus), taking advantage of the inherent helical symmetry. Both real space methods (treating sections of the helix as single particles) and reciprocal space methods (using diffraction patterns) can be used for these samples. === Tilt methods === The specimen stage of the microscope can be tilted (typically along a single axis), allowing the single particle technique known as random conical tilt. An area of the specimen is imaged at both zero and at high angle (~60-70 degrees) tilts, or in the case of the related method of orthogonal tilt reconstruction, +45 and −45 degrees. Pairs of particles corresponding to the same object at two different tilts (tilt pairs) are selected, and by following the parameters used in subsequent alignment and classification steps a three-dimensional reconstruction can be generated relatively easily. This is because the viewing angle (defined as three Euler angles) of each particle is known from the tilt geometry. 3D reconstructions from random conical tilt suffer from missing information resulting from a restricted range of orientations. Known as the missing cone (due to the shape in reciprocal space), this causes distortions in the 3D maps. However, the missing cone problem can often be overcome by combining several tilt reconstructions. Tilt methods are best suited to negatively stained samples, and can be used for particles that adsorb to the carbon support film in preferred orientations. The phenomenon known as charging or beam-induced movement makes collecting high-tilt images of samples in vitreous ice challenging. === Map visualization and fitting === Various software programs are available that allow viewing the 3D maps. These often enable the user to manually dock in protein coordinates (structures from X-ray crystallography, NMR, or a computational model such as one found in the AlphaFold Protein Structure Database) of subunits into the electron density. Several programs can also fit subunits computationally; as of the 2020s using these programs tend to produce better accuracy than manual docking because they can perform labor-intensive tasks such as: The scale of SPA-derived maps depends on knowing the pixel size (angstorms per pixel), which is not always accurate. Programs can automatically correct for this difference by using coordinate data or by using knowledge of chemical bonds. Many proteins are made up of several roughly rigid protein domains linked by flexible parts. Pre-existing coordinate data, whether experimental or computational, may not exactly match the inter-domain positioning of the cyro-EM map. Modern programs can automatically "chop" pre-existing coordinate data into individual domains and fit them in individually. For higher-resolution structures, it is pos

  Read more →
• 

  Landweber iteration

  The Landweber iteration or Landweber algorithm is an algorithm to solve ill-posed linear inverse problems, and it has been extended to solve non-linear problems that involve constraints. The method was first proposed in the 1950s by Louis Landweber, and it can be now viewed as a special case of many other more general methods. == Basic algorithm == The original Landweber algorithm attempts to recover a signal x from (noisy) measurements y. The linear version assumes that y = A x {\displaystyle y=Ax} for a linear operator A. When the problem is in finite dimensions, A is just a matrix. When A is nonsingular, then an explicit solution is x = A − 1 y {\displaystyle x=A^{-1}y} . However, if A is ill-conditioned, the explicit solution is a poor choice since it is sensitive to any noise in the data y. If A is singular, this explicit solution doesn't even exist. The Landweber algorithm is an attempt to regularize the problem, and is one of the alternatives to Tikhonov regularization. We may view the Landweber algorithm as solving: min x ‖ A x − y ‖ 2 2 / 2 {\displaystyle \min _{x}\|Ax-y\|_{2}^{2}/2} using an iterative method. The algorithm is given by the update x k + 1 = x k − ω A ∗ ( A x k − y ) . {\displaystyle x_{k+1}=x_{k}-\omega A^{}(Ax_{k}-y).} where the relaxation factor ω {\displaystyle \omega } satisfies 0 < ω < 2 / σ 1 2 {\displaystyle 0<\omega <2/\sigma _{1}^{2}} . Here σ 1 {\displaystyle \sigma _{1}} is the largest singular value of A {\displaystyle A} . If we write f ( x ) = ‖ A x − y ‖ 2 2 / 2 {\displaystyle f(x)=\|Ax-y\|_{2}^{2}/2} , then the update can be written in terms of the gradient x k + 1 = x k − ω ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\omega \nabla f(x_{k})} and hence the algorithm is a special case of gradient descent. For ill-posed problems, the iterative method needs to be stopped at a suitable iteration index, because it semi-converges. This means that the iterates approach a regularized solution during the first iterations, but become unstable in further iterations. The reciprocal of the iteration index 1 / k {\displaystyle 1/k} acts as a regularization parameter. A suitable parameter is found, when the mismatch ‖ A x k − y ‖ 2 2 {\displaystyle \|Ax_{k}-y\|_{2}^{2}} approaches the noise level. Using the Landweber iteration as a regularization algorithm has been discussed in the literature. == Nonlinear extension == In general, the updates generated by x k + 1 = x k − τ ∇ f ( x k ) {\displaystyle x_{k+1}=x_{k}-\tau \nabla f(x_{k})} will generate a sequence f ( x k ) {\displaystyle f(x_{k})} that converges to a minimizer of f whenever f is convex and the stepsize τ {\displaystyle \tau } is chosen such that 0 < τ < 2 / ( ‖ ∇ f ‖ 2 ) {\displaystyle 0<\tau <2/(\|\nabla f\|^{2})} where ‖ ⋅ ‖ {\displaystyle \|\cdot \|} is the spectral norm. Since this is special type of gradient descent, there currently is not much benefit to analyzing it on its own as the nonlinear Landweber, but such analysis was performed historically by many communities not aware of unifying frameworks. The nonlinear Landweber problem has been studied in many papers in many communities; see, for example. == Extension to constrained problems == If f is a convex function and C is a convex set, then the problem min x ∈ C f ( x ) {\displaystyle \min _{x\in C}f(x)} can be solved by the constrained, nonlinear Landweber iteration, given by: x k + 1 = P C ( x k − τ ∇ f ( x k ) ) {\displaystyle x_{k+1}={\mathcal {P}}_{C}(x_{k}-\tau \nabla f(x_{k}))} where P {\displaystyle {\mathcal {P}}} is the projection onto the set C. Convergence is guaranteed when 0 < τ < 2 / ( ‖ A ‖ 2 ) {\displaystyle 0<\tau <2/(\|A\|^{2})} . This is again a special case of projected gradient descent (which is a special case of the forward–backward algorithm) as discussed in. == Applications == Since the method has been around since the 1950s, it has been adopted and rediscovered by many scientific communities, especially those studying ill-posed problems. In X-ray computed tomography it is called simultaneous iterative reconstruction technique (SIRT). It has also been used in the computer vision community and the signal restoration community. It is also used in image processing, since many image problems, such as deconvolution, are ill-posed. Variants of this method have been used also in sparse approximation problems and compressed sensing settings.

  Read more →
• 

  Automatic meter reading

  Automatic meter reading (AMR) is the technology of automatically collecting consumption, diagnostic, and status data from water meter or energy metering devices (gas, electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. This timely information coupled with analysis can help both utility providers and customers better control the use and production of electric energy, gas usage, or water consumption. AMR technologies include handheld, mobile and network technologies based on telephony platforms (wired and wireless), radio frequency (RF), or powerline transmission. == Technologies == === Touch technology === With touch-based AMR, a meter reader carries a handheld computer or data collection device with a wand or probe. The device automatically collects the readings from a meter by touching or placing the read probe close to a reading coil enclosed in the touchpad. When a button is pressed, the probe sends an interrogate signal to the touch module to collect the meter reading. The software in the device matches the serial number to one in the route database, and saves the meter reading for later download to a billing or data collection computer. Since the meter reader still has to go to the site of the meter, this is sometimes referred to as "on-site" AMR. Another form of contact reader uses a standardized infrared port to transmit data. Protocols are standardized between manufacturers by such documents as ANSI C12.18 or IEC 61107. === AMR hosting === AMR hosting is a back-office solution which allows a user to track their electricity, water, or gas consumption over the Internet. All data is collected in near real-time, and is stored in a database by data acquisition software. The user can view the data via a web application, and can analyze the data using various online analysis tools such as charting load profiles, analyzing tariff components, and verify their utility bill. === Radio frequency network === Radio frequency based AMR can take many forms. The more common ones are handheld, mobile, satellite and fixed network solutions. There are both two-way RF systems and one-way RF systems in use that use both licensed and unlicensed RF bands. In a two-way or "wake up" system, a radio signal is normally sent to an AMR meter's unique serial number, instructing its transceiver to power-up and transmit its data. The meter transceiver and the reading transceiver both send and receive radio signals. In a one-way "bubble-up" or continuous broadcast type system, the meter transmits continuously and data is sent every few seconds. This means the reading device can be a receiver only, and the meter a transmitter only. Data travels only from the meter transmitter to the reading receiver. There are also hybrid systems that combine one-way and two-way techniques, using one-way communication for reading and two-way communication for programming functions. RF-based meter reading usually eliminates the need for the meter reader to enter the property or home, or to locate and open an underground meter pit. The utility saves money by increased speed of reading, has less liability from entering private property, and has fewer missed readings from being unable to access the meter. The technology based on RF is not readily accepted everywhere. In several Asian countries, the technology faces a barrier of regulations in place pertaining to use of the radio frequency of any radiated power. For example, in India the radio frequency which is generally in ISM band is not free to use even for low power radio of 10 mW. The majority of manufacturers of electricity meters have radio frequency devices in the frequency band of 433/868 MHz for large scale deployment in European countries. The frequency band of 2.4 GHz can be now used in India for outdoor as well as indoor applications, but few manufacturers have shown products within this frequency band. Initiatives in radio frequency AMR in such countries are being taken up with regulators wherever the cost of licensing outweighs the benefits of AMR. ==== Handheld ==== In handheld AMR, a meter reader carries a handheld computer with a built-in or attached receiver/transceiver (radio frequency or touch) to collect meter readings from an AMR capable meter. This is sometimes referred to as "walk-by" meter reading since the meter reader walks by the locations where meters are installed as they go through their meter reading route. Handheld computers may also be used to manually enter readings without the use of AMR technology as an alternate but this will not support exhaustive data which can be accurately read using the meter reading electronically. ==== Mobile ==== Mobile or "drive-by" meter reading is where a reading device is installed in a vehicle. The meter reader drives the vehicle while the reading device automatically collects the meter readings. Often, for mobile meter reading, the reading equipment includes navigational and mapping features provided by GPS and mapping software. With mobile meter reading, the reader does not normally have to read the meters in any particular route order, but just drives the service area until all meters are read. Components often consist of a laptop or proprietary computer, software, RF receiver/transceiver, and external vehicle antennas. ==== Satellite ==== Transmitters for data collection satellites can be installed in the field next to existing meters. The satellite AMR devices communicate with the meter for readings, and then sends those readings over a fixed or mobile satellite network. This network requires a clear view to the sky for the satellite transmitter/receiver, but eliminates the need to install fixed towers or send out field technicians, thereby being particularly suited for areas with low geographic meter density. ==== RF technologies commonly used for AMR ==== Narrow Band (single fixed radio frequency) Spread spectrum Direct-sequence spread spectrum (DSSS) Frequency-hopping spread spectrum (FHSS) There are also meters using AMR with RF technologies such as cellular phone data systems, Zigbee, Bluetooth, Wavenis and others. Some systems operate with U.S. Federal Communications Commission (FCC) licensed frequencies and others under FCC Part 15, which allows use of unlicensed radio frequencies. ==== Wi-Fi ==== WiSmart is a versatile platform which can be used by a variety of electrical home appliances in order to provide wireless TCP/IP communication using the 802.11 b/g protocol. Devices such as the Smart Thermostat permit a utility to lower a home's power consumption to help manage power demand. The city of Corpus Christi became one of the first cities in the United States to implement citywide Wi-Fi, which had been free until May 31, 2007, mainly to facilitate AMR after a meter reader was attacked by a dog. Today many meters are designed to transmit using Wi-Fi, even if a Wi-Fi network is not available, and they are read using a drive-by local Wi-Fi hand held receiver. The meters installed in Corpus Christi are not directly Wi-Fi enabled, but rather transmit narrow-band burst telemetry on the 460 MHz band. This narrow-band signal has much greater range than Wi-Fi, so the number of receivers required for the project are far fewer. Special receiver stations then decode the narrow-band signals and resend the data via Wi-Fi. Most of the automated utility meters installed in the Corpus Christi area are battery powered. Wi-Fi technology is unsuitable for long-term battery-powered operation. === Power line communication === PLC is a method where electronic data is transmitted over power lines back to the substation, then relayed to a central computer in the utility's main office. This would be considered a type of fixed network system—the network being the distribution network which the utility has built and maintains to deliver electric power. Such systems are primarily used for electric meter reading. Some providers have interfaced gas and water meters to feed into a PLC type system. == Brief history == In 1972, Theodore George "Ted" Paraskevakos, while working with Boeing in Huntsville, Alabama, developed a sensor monitoring system which used digital transmission for security, fire and medical alarm systems as well as meter reading capabilities for all utilities. This technology was a spin-off of the automatic telephone line identification system, now known as caller ID. In 1974, Paraskevakos was awarded a U.S. patent for this technology. In 1977, he launched Metretek, Inc., which developed and produced the first fully automated, commercially available remote meter reading and load management system. Since this system was developed pre-Internet, Metret

  Read more →
• 

  AdBlock

  AdBlock is an ad-blocking browser extension for Google Chrome, Apple Safari (desktop and mobile), Firefox, Samsung Internet, Microsoft Edge and Opera. AdBlock allows users to prevent page elements, such as advertisements, from being displayed. It is free to download and use, and it includes optional donations to the developers. The AdBlock extension was created on December 8, 2009, which is the day that supports for extensions was added to Google Chrome. It was one of the first Google Chrome extensions that was made. Since 2016, AdBlock has been based on the Adblock Plus source code. In July 2018, AdBlock acquired uBlock, a commercial ad-blocker owned by uBlock LLC and based on uBlock Origin. In April 2021, eyeo GmbH (developer of Adblock Plus) announced its purchase of AdBlock, Inc (formerly BetaFish, Inc). == Crowdfunding == Gundlach launched a crowdfunding campaign on Crowdtilt in August 2013 in order to fund an ad campaign to raise awareness of ad-blocking and to rent a billboard at Times Square. After the one-month campaign, it raised $55,000. == Sales and acceptable ads == AdBlock was sold to an anonymous buyer in 2015 and on October 15, 2015, Gundlach's name was taken down from the site. In the terms of the deal, the original developer Michael Gundlach left operations to Adblock's continuing director, Gabriel Cubbage, and as of October 2, 2015, AdBlock began participating in the Acceptable Ads program. Acceptable Ads identifies "non-annoying" ads, which AdBlock shows by default. The intent is to allow non-invasive advertising, to either maintain support for websites that rely on advertising as a main source of revenue or for websites that have an agreement with the program. == Filters == AdBlock uses EasyList, the same filter syntax as Adblock Plus for Firefox, and natively supports the use of a number of filter lists. == Partnership with Amnesty International == On March 12, 2016, in support of World Day Against Cyber Censorship, and in partnership with Amnesty International, instead of blocking ads, AdBlock replaced ads with banners linked to articles on Amnesty's website, written by prominent free speech advocates such as Edward Snowden, to raise awareness of government-imposed online censorship and digital privacy issues around the world. The campaign was met with both praise and criticism, with AdBlock's CEO, Gabriel Cubbage, defending the decision in an essay on AdBlock's website, saying "We’re showing you Amnesty banners, just for today, because we believe users should be part of the conversation about online privacy. Tomorrow, those spaces will be vacant again. But take a moment to consider that in an increasingly information-driven world, when your right to digital privacy is threatened, so is your right to free expression." Meanwhile, Simon Sharwood of The Register characterized Cubbage's position as "'You should control your computer except when we feel political', says AdBlock CEO". == AdBlock for Firefox == On September 13, 2014, the AdBlock team released a version for Firefox users, ported from the code for Google Chrome, released under the same free software license as the original Adblock. The extension was removed on April 2, 2015, by an administrator on Mozilla Add-ons. On December 7, 2015, the official AdBlock site's knowledge base article stated that with version 44 or higher of Firefox desktop and Firefox Mobile, AdBlock will not be supported. The last version of Adblock for those platforms will work on older versions of Firefox. AdBlock was released again on Mozilla Add-ons on November 17, 2016. On April 1, 2012, Adblock developer Michael Gundlach tweaked the code to display LOLcats instead of simply blocking ads. Initially developed as a short-lived April Fools joke, the response was so positive that CatBlock was continued to be offered as an optional add-on supported by a monthly subscription. On October 23, 2014, the developer decided to end official support for CatBlock, and made it open-source, under GPLv3 licensing, as the original extension.

  Read more →
• 

  Quack.com

  Quack.com was an early voice portal company. The domain name later was used for Quack, an iPad search application from AOL. == History == It was founded in 1998 by Steven Woods, Jeromy Carriere and Alex Quilici as a Pittsburgh, Pennsylvania, USA, based voice portal infrastructure company named Quackware. Quack was the first company to try to create a voice portal: a consumer-based destination "site" in which consumers could not only access information by voice alone, but also complete transactions. Quackware launched a beta phone service in 1999 that allowed consumers to purchase books from sites such as Amazon and CDs from sites such as CDNow by answering a short set of questions. Quack followed with a set of information services from movie listings (inspired by, but expanding upon, Moviefone) to news, weather and stock quotes. This concept introduced a series of lookalike startups including Tellme Networks which raised more money than any Internet startup in history on a similar concept. Quack received its first venture funding from HDL Capital in 1999 and moved operations to Mountain View in Silicon Valley, California in 1999. A deal with Lycos was announced in May 2000. In September 2000 Quack was acquired for $200 million by America Online (AOL) and moved onto the Netscape campus with what was left of the Netscape team. Quack was attacked in the Canadian press for being representative of the Canadian "brain drain" to the US during the Internet bubble, focusing its recruiting efforts on the University of Waterloo, hiring more than 50 engineers from Waterloo in less than 10 months. Quack competitor Tellme Networks raised enormous funds in what became a highly competitive market in 2000, with the emergence of more than a dozen additional competitors in a 12-month period. Following its acquisition by America Online in an effort led by Ted Leonsis to bring Quack into AOL Interactive, the Quack voice service became AOLbyPhone as one of AOL's "web properties" along with MapQuest, Moviefone and others. Quack secured several patents that underlie the technical challenges of delivering interactive voice services. Constructing a voice portal required integrations and innovations not only in speech recognition and speech generation, but also in databases, application specification, constraint-based reasoning and artificial intelligence and computational linguistics. "Quack"'s name derived from the company goal of providing not only voice-based services, but more broadly "Quick Ubiquitous Access to Consumer Knowledge". The patents assigned to Quack.com include: System and method for voice access to Internet-based information, System and method for advertising with an Internet Voice Portal and recognizing the axiom that in interactive voice systems one must "know the set of possible answers to a question before asking it". System and method for determining if one web site has the same information as another web site. Quack.com was spoofed in The Simpsons in March 2002 in the episode "Blame It on Lisa" in which a "ComQuaak" sign is replaced by another equally crazy telecom company name. == 2010 onwards == In July 2010, quack.com became the focus of a new AOL iPad application, that was a web search experience. The product delivers web results and blends in picture, video and Twitter results. It enables you to preview the web results before you go to the site, search within each result, and flip through the results pages, making full use of the iPad's touch screen features. The iPad app was free via iTunes, but support discontinued in 2012.

  Read more →
• 

  Artipic

  Artipic is a graphics editor developed for Microsoft Windows. An older version for macOS is still available but unsupported. Artipic features drawing, editing, retouching, transforming and composing images including color corrections, effects and layer-based operations. It converts all common image formats and imports camera raw formats. In the global image editing ecosystem Artipic can be positioned somewhere in the middle. It differs from simple free photo editors by more advanced capabilities, however it does not cover the complete professional-level functionality pack provided by industry leaders like Adobe Photoshop. == History == Artipic developed by Swedish company Artipic AB. Artipic 1.0 was released in March 2014 as a free version. The first commercial version on Microsoft Windows was released in November 2014, on macOS – in October 2015. == Features == Supports Microsoft Windows and macOS Standard tools: select, crop, move, rotate, transform, stamp, color picking, text Advanced tools: custom brushes, gradients, shapes, paths, layers and masks Special tools: healing brush, red-eye effect reduction, dodge and burn brushes Adjustments: Brightness & Contrast, Hue & Saturation, Curves, Levels, Color Balance, Gamma Correction, Exposure, Color Temperature, Tint, Color Enhancer, Photo Filter Simulation, Posterization, Thresholding Filters: Smoothen, Sharpen, Vignetting, High-pass, Diffuse Glow, Shadow, Gaussian Blur Reversible (non-destructive) stylization presets Batch processing White balance RAW-converter including Gray Card Adobe Photoshop images supported == Version history ==

  Read more →
• 

  NeoPaint

  NeoPaint is a raster graphics editor for Windows and MS-DOS. It supports several file formats including JPEG, GIF, BMP, PNG, and TIFF. The developer, NeoSoft, advertises NeoPaint as "being simple enough for use by children while remaining powerful enough for the purposes of advanced image editing". The first version, NeoPaint 1.0, was released in 1992 on floppy disks. It supported video modes ranging from 640x350 to 1024x768 and multiple fonts. NeoPaint 2.2 came out for MS-DOS 3.1 in 1993, with support of for 2, 16, or 256 color images in Hercules, EGA, VGA, and Super VGA modes. NeoPaint 3.1 was released in 1995 supporting 24-bit images and formats like PCX, TIFF and BMP. NeoPaint 3.2 was released in 1996. An updated version, NeoPaint 3.2a, supported the GIF file format. NeoPaint 3.2d was released in 1998. A Windows 95 version named NeoPaint for Windows v4.0 was released in 1999 supporting the PNG file format. On September 1, 2018 the program was rebranded as PixelNEO, becoming one of the VisualNEO software products. Formats such as JPEG 2000, ICO, CUR, PSD and RAW are supported.

  Read more →
• 

  Scan line

  A scan line (also scanline) is one line, or row, in a raster scanning pattern, such as a line of video on a cathode-ray tube (CRT) display of a television set or computer monitor. On CRT screens the horizontal scan lines are visually discernible, even when viewed from a distance, as alternating colored lines and black lines, especially when a progressive scan signal with below maximum vertical resolution is displayed. This is sometimes used today as a visual effect in computer graphics. The term is used, by analogy, for a single row of pixels in a raster graphics image. Scan lines are important in representations of image data, because many image file formats have special rules for data at the end of a scan line. For example, there may be a rule that each scan line starts on a particular boundary (such as a byte or word; see for example BMP file format). This means that even otherwise compatible raster data may need to be analyzed at the level of scan lines in order to convert between formats.

  Read more →
• 

  Dabbler

  Dabbler is natural media drawing software for beginners. It was initially developed by Fractal Design Corporation. It is a simplified version of Fractal Design Painter, and included multimedia tutorials and a fullscreen interface. Dabbler was released as "Art Dabbler" after the MetaCreations merger, and rights were eventually transferred to Corel. Dabbler operating systems are Mac OS and Microsoft Windows.

  Read more →
• 

  Elements (toolchain)

  RemObjects Elements is a toolchain for software development, comprising six programming languages: C#, Swift, Go, Java, Oxygene (a form of modern Object Pascal), and Visual Basic .NET. All languages interoperate, meaning a single project can use any combination of languages, and they can all be compiled to .NET, the JVM, native, or WebAssembly. Elements supports Microsoft Windows, all Apple Inc. platforms (including iOS, visionOS and watchOS), Android, and Linux. Elements also supports language conversion, allowing source code in one language to be rewritten in another. Elements is supported in Visual Studio, but RemObjects also makes their own IDEs, Fire (on MacOS) and Water (on Windows.) == Background == RemObjects began in 2002, creating software for Delphi, but in 2005 in response to the growth of .NET and that Delphi was targeting only native Windows, they released Oxygene (known as Chrome at the time) as a new version of Object Pascal, with more modern syntax as well as being .NET-native. Since then, five other languages have been added to the suite, as well as compiling for the web via WebAssembly and to native architectures (eg Intel 32/64 or ARM64). Elements is primarily intended for developers who want to pull together libraries and codebases written in multiple languages, including legacy codebases in older languages while modernizing either with newer syntax and features or by adding in the use of newer or more popular languages. Because of the Oxygene flavour of Object Pascal, supporting Delphi apps is a primary focus, including allowing Pascal to be compiled for other architectures or providing language features that match other prominent languages. == Approach == New versions of the Elements come out approximately every week. RemObjects names its programming languages after chemical elements, sometimes with poetic or musical spelling, rather than referring to them directly. They are: C#: Hydrogene Object Pascal: Oxygene Java: Iodine Visual Basic: Mercury Go: Gold Swift: Silver == History == The Elements compiler was first introduced with version 1.0 in 2005 under the name "Chrome", with support for only the Oxygene language on the .NET platform, primarily as a response to the then-new and not well-received Delphi .NET compiler from Embarcadero. Chrome saw updates to version 1.5 'Floorshow' and Chrome 2.0 'Joyride' over the next few years, moving in parallel with major advancements on the .NET platform for .NET 2.0 (Generics) and .NET 3.x (LINQ), respectively. With the release of version 3.0 (code-named Oxygène after the Jean-Michel Jarre album of the same name) Chrome was rebranded to Oxygene in 2008, and also shipped co-branded by Embarcadero as Delphi Prism (later just Prism) as part of RAD Studio, replacing Embarcadero's own and now-defunct Delphi.NET compiler. 2010 saw the release of Oxygene 4 ("Echoes"), the last version to focus on just a single language and platform. With Oxygene 5 in 2011 and Oxygene 6 in 2013, RemObjects introduced new platform support for Java/Android (code-name "Cooper") and then Cocoa, the Apple development platform (code-name "Toffee"). Elements 7.0 was released at the beginning of 2014, adding the second programming language, C# to the compiler, and delegating Oxygene from the product name to merely branding the Object Pascal-based language. Over the subsequent years, Elements gained support for additional languages, with Apple Swift in 2015, Java in 2017, and subsequently Google's Go and Mercury, a revitalized Visual Basic.NET. Elements also gained support for its fourth target platform, "Island", for CPU-native compilation for Windows, Linux, and WebAssembly. In addition to the chemical elements-based names for the different languages, the "Elements" concept was carried on with the introduction of dedicated development environments alchemically named Fire (for the Mac, in 2015) and Water (for Windows, in 2018). == Fire and Water (IDEs) == Fire and Water are integrated development environments developed by RemObjects Software. They are designed specifically for use with the Elements Compiler. Fire is the version developed for macOS, while Water is intended for Microsoft Windows. Both IDEs are designed to work closely with the Elements compiler and are primarily intended for developers using the RemObjects language ecosystem. They support software development across multiple platforms, including .NET, Android, iOS, macOS, Windows, Linux, and WebAssembly. The IDEs include standard development tools such as syntax highlighting, code completion, debugging, and project navigation. Build operations are managed using a custom system known as EBuild, which is part of the broader Elements toolchain. The IDEs are distributed as part of the RemObjects Elements package and are updated in coordination with the compiler itself. == In media == Oxygene has been mentioned several times by Verity Stob in their Chronicles of Delphi series, currently living at The Register.

  Read more →
• 

  Computer-aided lean management

  Computer-aided lean management, in business management, is a methodology of developing and using software-controlled, lean systems integration. Its goal is to drive innovation towards cost and cycle-time savings. It attempts to create an efficient use of capital and resources through the development and use of one integrated system model to run a business's planning, engineering, design, maintenance, and operations. == Overview == Computer-Aided Lean Management (CALM) is a management philosophy that uses software to reduce risk and inefficiencies. CALM acts on uncertainties and business inefficiencies to increase profitability through the use of computational decision-making tools that enable opportunities for additional value creation. It is based on the application of software to enable continuous improvement through an Integrated System Model (ISM) of the business’s physical assets, business processes, and machine learning. This integration of software applications using lean principles was developed in the aerospace industry and has migrated to the energy industry. The creation of an ISM removes the barriers posed by the silos or stovepipes inherent in the departmentalization of most companies. Integration enables lean uses of information for the creation of actionable knowledge. CALM strives to create such a lean management approach to running the company through the rigors of software enforcement. From this software enforcement comes clear policy and procedures that are adhered to, activity-based costing, measurement of effectiveness, and the capability of using advanced algorithms for dramatic improvements in optimization of resources. CALM creates business capabilities through software to enable technology application, streamlining of processes, and a lean organizational structure. The methodology is based on a common sense approach for running a business, by measuring actions taken and using those measurements to design more efficient processes. == History == CALM was inspired by lean processes and techniques that were already dominant management technologies with a wide diversity of applications and successes. Motorola and General Electric had been known for the concepts of Six Sigma; Boeing had been managing mass (using modular and flexible assembly options), and Toyota combined elements of these methodologies to create the Toyota Production System. Boeing then took the Toyota model and added computer-aided enforcement of lean methodologies throughout the manufacturing process. One of the major sources for CALM's outgrowth was integrated definition (IDEF) modeling in aerospace manufacturing that was pioneered by the U.S. Air Force in the 1970s. IDEF is a methodology designed to model the end-to-end decisions, actions, and activities of an organization or system so that costs, performance, and cycle times can be optimized. IDEF methods have been adapted for wider use in automotive, aerospace, pharmaceuticals, and software development industries. IDEF methods serve as a starting point to understand lean management through semantic data modeling. The IDEF process begins by mapping the existing functions of an enterprise, creating a graphical model, or road map, that shows what controls each important function, who performs it, what resources are required for carrying it out, what it produces, how much it costs, and what relationships it has to other functions of the organization. IDEF simulations have been found to be efficient at streamlining and modernizing both companies and governmental agencies. Perhaps the best-developed evolution of the IDEF model beyond Toyota was at Boeing. Their project life-cycle process has grown into a rigorous software system that links people, tasks, tools, materials, and the environmental impact of any newly planned project, before any building is allowed to begin. Routinely, more than half of the time for any given project is spent building the precedence diagrams, or three-dimensional process maps, integrating with outside suppliers, and designing the implementation plan–all on the computer. Once real activity is initiated, an action tracker is used to monitor inputs and outputs versus the schedule and delivery metrics in real time throughout the organization. When the execution of a new airplane design begins, it is so well organized that it consistently cuts both costs and build time in half for each successive generation of airframe. Boeing created a complex lean management process called 'define and control airplane configuration/manufacturing resource management' (DCAC/MRM). The process was built with the help of the operations research and computer sciences departments of the University of Pittsburgh. The manufacture of the Boeing 777 was ultimately a success, and it became the precursor to succeeding generations of CALM at Boeing. The methodology of CALM has recently been applied to field orientated infrastructure based businesses with highly interdependent systems, such as electric utilities where a smart grid concept is being researched and developed. The management of infrastructure-based industries like oil, gas, electricity, water, transportation, and renewables requires massive investments in interdependent, physical infrastructure, as well as simultaneous attention to disparate market forces. In infrastructure businesses that manage field assets, uncertainty is the biggest impediment to profitability, rather than the maintenance of efficient supply chains or the management of factory assembly lines. These businesses are dominated by risk from uncertainties such as weather, market variations, transportation disruptions, government actions, logistic difficulties, geology, and asset reliability. CALM has been applied to deal with these types of infrastructure based challenges.

  Read more →
• 

  Blackmagic Design

  Blackmagic Design Pty Ltd is an Australian company that develops digital cinema technology and manufactures professional video production hardware and software. Headquartered in South Melbourne, it is known for producing high-end digital movie cameras and a range of broadcast and post-production equipment. The company also develops software applications, including the DaVinci Resolve application for non-linear video editing, color correction, color grading, visual effects, and audio post-production. == History == Blackmagic Design Pty Ltd was founded on 7 September 2001 by Grant Petty. Its first product, DeckLink, introduced in 2002, was a video capture card for macOS that supported uncompressed 10-bit video, marking a shift toward professional-grade yet affordable video workflows. Subsequent versions—including the DeckLink 2, Pro SDI, HD Plus, and Multibridge—added capabilities such as color correction, Windows support, and compatibility with major editing software like Adobe Premiere Pro, to broaden the product's appeal. At the 2012 NAB Show, Blackmagic announced its first Cinema Camera, a digital movie camera. Blackmagic made several acquisitions over the next decade. In 2009, it acquired da Vinci Systems, known for its color-grading tools. In 2010, it acquired Echolab's ATEM switcher line, in 2014, it added eyeon Software (developer of the Blackmagic Fusion compositing software) and London's Cintel (film scanning and restoration), and in 2016, it acquired Fairlight, an audio technology company known for its CMI synthesizers as well as mixing consoles. == Products == List of all products developed by the company. Editing, Color Correction and Audio Post Production DaVinci Resolve (free version) and DaVinci Resolve Studio (paid version), computer software for non-linear video editing, color correction, color grading, visual effects, and audio post-production. Audio/Video Controller Consoles: Editor Keyboard, Speed Editor, DaVinci Resolve Replay Editor, Micro Panel, Mini Panel, DaVinci Resolve Micro Color Panel, Advanced Panel, Fairlight Console Channel Fader, Fairlight Console Channel Control, Fairlight Console LCD Monitor, Fairlight Console Audio Editor, Fairlight Desktop Audio Editor, Fairlight Desktop Console, Fairlight Audio Interface Cintel Film Scanner (Generations 1-3) Live Production Home Streaming: ATEM Mini, ATEM Mini Pro/ISO, ATEM Mini Extreme, ATEM Mini Extreme ISO (The ATEM Mini series has both HDMI and SDI variants) Production Switchers: ATEM 1,2 & 4 M/E Constellation HD, ATEM 1,2 & 4 M/E Constellation 4K, ATEM Constellation 8K, ATEM 1,2 & 4 M/E Production Studio 4K, ATEM Television Studio HD8 & HD8 ISO Switcher & Camera Controllers: ATEM Camera Control Panel, ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel, ATEM 4 M/E Advanced Panel Chroma Keyers: Ultimatte 12 HD Mini, Ultimatte 12 HD, Ultimatte 12 4K, Ultimatte 12 8K Recording and Storage: HyperDeck Studio HD Mini, HyperDeck Studio HD Plus, HyperDeck Studio HD Plus, HyperDeck Studio 4K Pro, HyperDeck Extreme 8K HDR, HyperDeck Extreme 4K HDR, HyperDeck Extreme Control, HyperDeck Shuttle HD, Duplicator 4K, MultiDock 10G, Video Assist 7" 12G HDR, Video Assist 5" 12G HDR Capture and Playback UltraStudio: 3G, HD Mini, 4K Mini, 4K Extreme 3 DeckLink (PCIe cards): Mini Recorder, Mini Monitor, Mini Monitor 4K, Mini Recorder 4K, Duo 2 Mini, Duo 2, Quad 2, SDI 4K, Studio 4K, 4K Extreme 12G, 8K Pro, Quad HDMI Recorder Network Storage Cloud Store Cloud Pod Broadcast Converters Micro Converter: BiDirectional SDI/HDMI 3G wPSU, HDMI to SDI 3G wPSU, SDI to HDMI 3G wPSU, BiDirectional SDI/HDMI 3G, HDMI to SDI 3G, SDI to HDMI 3G Mini Converters: Audio to SDI, Optical Fiber 12G, SDI Multiplex 4K, Quad SDI to HDMI 4K, SDI Distribution 4K, SDI to Analog 4K, Audio to SDI 4K, SDI to Audio 4K, HDMI to SDI 6G, SDI to HDMI 6G Teranex Mini: SDI Distribution 12G, SDI to HDMI 12G, Audio to SDI 12G, SDI to Analog 12G, SDI to HDMI 8K HDR, SDI to DisplayPort 8K HDR 2110 IP Converters Routing and Distribution Videohub

  Read more →