The Conference on Neural Information Processing Systems (abbreviated as NeurIPS and formerly NIPS) is a machine learning and computational neuroscience conference held annually in December. Along with ICLR and ICML, it is one of the three primary conferences of high impact in machine learning and artificial intelligence research. The conference includes three days of invited talks along with oral and poster presentations of refereed papers, followed by two days of workshops and competitions. == History == The NeurIPS meeting was first proposed in 1986 at the annual invitation-only Snowbird Meeting on Neural Networks for Computing organized by The California Institute of Technology and Bell Laboratories. NeurIPS was designed as a complementary open interdisciplinary meeting for researchers exploring biological and artificial Neural Networks. Reflecting this multidisciplinary approach, NeurIPS began in 1987 with information theorist Ed Posner as the conference president and learning theorist Yaser Abu-Mostafa as program chairman. Research presented in the early NeurIPS meetings included a wide range of topics from efforts to solve purely engineering problems to the use of computer models as a tool for understanding biological nervous systems. Since then, the biological and artificial systems research streams have diverged, and recent NeurIPS proceedings have been dominated by papers on machine learning, artificial intelligence and statistics. From 1987 until 2000 NeurIPS was held in Denver, United States. Since then, the conference was held in Vancouver, Canada (2001–2010), Granada, Spain (2011), and Lake Tahoe, United States (2012–2013). In 2014 and 2015, the conference was held in Montreal, Canada, in Barcelona, Spain in 2016, in Long Beach, United States in 2017, in Montreal, Canada in 2018 and Vancouver, Canada in 2019. Reflecting its origins at Snowbird, Utah, the meeting was accompanied by workshops organized at a nearby ski resort up until 2013, when it outgrew ski resorts. The first NeurIPS Conference was sponsored by the IEEE. The following NeurIPS Conferences have been organized by the NeurIPS Foundation, established by Ed Posner. Terrence Sejnowski has been the president of the NeurIPS Foundation since Posner's death in 1993. The board of trustees consists of previous general chairs of the NeurIPS Conference. The first proceedings was published in book form by the American Institute of Physics in 1987, and was entitled Neural Information Processing Systems, then the proceedings from the following conferences have been published by Morgan Kaufmann (1988–1993), MIT Press (1994–2004) and Curran Associates (2005–present) under the name Advances in Neural Information Processing Systems. The conference was originally abbreviated as "NIPS". By 2018 a few commentators were criticizing the abbreviation as encouraging sexism due to its association with the word nipples, and as being a slur against Japanese. The board changed the abbreviation to "NeurIPS" in November 2018. == Topics == Along with machine learning and neuroscience, other fields represented at NeurIPS include cognitive science, psychology, computer vision, statistical linguistics, and information theory. Over the years, NeurIPS became a premier conference on machine learning and although the 'Neural' in the NeurIPS acronym had become something of a historical relic, the resurgence of deep learning in neural networks since 2012, fueled by faster computers and big data, has led to achievements in speech recognition, object recognition in images, image captioning, language translation and world championship performance in the game of Go, based on neural architectures inspired by the hierarchy of areas in the visual cortex (ConvNet) and reinforcement learning inspired by the basal ganglia (Temporal difference learning). Notable affinity groups have emerged from the NeurIPS conference and displayed diversity, including Black in AI (in 2017), Queer in AI (in 2016), and others. === Named lectures === In addition to invited talks and symposia, NeurIPS also organizes two named lectureships to recognize distinguished researchers. The NeurIPS Board introduced the Posner Lectureship in honor of NeurIPS founder Ed Posner; two Posner Lectures were given each year up to 2015. Past lecturers have included: 2010 – Josh Tenenbaum and Michael I. Jordan 2011 – Rich Sutton and Bernhard Schölkopf 2012 – Thomas Dietterich and Terry Sejnowski 2013 – Daphne Koller and Peter Dayan 2014 – Michael Kearns and John Hopfield 2015 – Zoubin Ghahramani and Vladimir Vapnik 2016 – Yann LeCun 2017 – John Platt 2018 – Joëlle Pineau 2019 – Yoshua Bengio 2020 – Christopher Bishop 2021 – Peter Bartlett In 2015, the NeurIPS Board introduced the Breiman Lectureship to highlight work in statistics relevant to conference topics. The lectureship was named for statistician Leo Breiman, who served on the NeurIPS Board from 1994 to 2005. Past lecturers have included: 2015 – Robert Tibshirani 2016 – Susan Holmes 2017 – Yee Whye Teh 2018 – David Spiegelhalter 2019 – Bin Yu 2020 – Marloes Maathuis 2021 – Gabor Lugosi 2022 – Emmanuel Candes 2023 – Susan Murphy 2024 – Arnaud Doucet == NeurIPS consistency experiment == In NIPS 2014, the program chairs duplicated 10% of all submissions and sent them through separate reviewers to evaluate randomness in the reviewing process. Several researchers interpreted the result. Regarding whether the decision in NIPS is completely random or not, John Langford writes: "Clearly not—a purely random decision would have arbitrariness of ~78%. It is, however, quite notable that 60% is much closer to 78% than 0%." He concludes that the result of the reviewing process is mostly arbitrary. In NeurIPS 2021, the program chairs repeated the 2014 experiment and found similar levels of review inconsistency; 23% of duplicated submissions received different accept/reject decisions, and 50.6% of accepted papers would have been rejected under re-review. == Locations == 1987–2000: Denver, Colorado, United States 2001–2010: Vancouver, British Columbia, Canada 2011: Granada, Spain 2012 & 2013: Stateline, Nevada, United States 2014 & 2015: Montréal, Quebec, Canada 2016: Barcelona, Spain 2017: Long Beach, California, United States 2018: Montréal, Quebec, Canada 2019: Vancouver, British Columbia, Canada 2020: Vancouver, British Columbia, Canada (virtual conference) 2021: Virtual conference 2022 & 2023: New Orleans, Louisiana, United States 2024: Vancouver, British Columbia, Canada 2025: San Diego, California, United States and Mexico City, Mexico 2026: Sydney, New South Wales, Australia, with satellite events in Atlanta and Paris
Production (computer science)
In computer science, a production or production rule is a rewrite rule that replaces some symbols with other symbols. A finite set of productions P {\displaystyle P} is the main component in the specification of a formal grammar (specifically a generative grammar). In such grammars, a set of productions is a special case of relation on the set of strings V ∗ {\displaystyle V^{}} (where ∗ {\displaystyle {}^{}} is the Kleene star operator) over a finite set of symbols V {\displaystyle V} called a vocabulary that defines which non-empty strings can be substituted with others. The set of productions is thus a special kind subset P ⊂ V ∗ × V ∗ {\displaystyle P\subset V^{}\times V^{}} and productions are then written in the form u → v {\displaystyle u\to v} to mean that ( u , v ) ∈ P {\displaystyle (u,v)\in P} (not to be confused with → {\displaystyle \to } being used as function notation, since there may be multiple rules for the same u {\displaystyle u} ). Given two subsets A , B ⊂ V ∗ {\displaystyle A,B\subset V^{}} , productions can be restricted to satisfy P ⊂ A × B {\displaystyle P\subset A\times B} , in which case productions are said "to be of the form A → B {\displaystyle A\to B} . Different choices and constructions of A , B {\displaystyle A,B} lead to different types of grammars. In general, any production of the form u → ϵ , {\displaystyle u\to \epsilon ,} where ϵ {\displaystyle \epsilon } is the empty string (sometimes also denoted λ {\displaystyle \lambda } ), is called an erasing rule, while productions that would produce strings out of nowhere, namely of the form ϵ → v , {\displaystyle \epsilon \to v,} are never allowed. In order to allow the production rules to create meaningful sentences, the vocabulary is partitioned into (disjoint) sets Σ {\displaystyle \Sigma } and N {\displaystyle N} providing two different roles: Σ {\displaystyle \Sigma } denotes the terminal symbols known as an alphabet containing the symbols allowed in a sentence; N {\displaystyle N} denotes nonterminal symbols, containing a distinguished start symbol S ∈ N {\displaystyle S\in N} , that are needed together with the production rules to define how to build the sentences. In the most general case of an unrestricted grammar, a production u → v {\displaystyle u\to v} , is allowed to map arbitrary strings u {\displaystyle u} and v {\displaystyle v} in V {\displaystyle V} (terminals and nonterminals), as long as u {\displaystyle u} is not empty. So unrestricted grammars have productions of the form V ∗ ∖ { ϵ } → V ∗ {\displaystyle V^{}\setminus \{\epsilon \}\to V^{}} or if we want to disallow changing finished sentences V ∗ N V ∗ = ( V ∗ ∖ Σ ∗ ) → V ∗ {\displaystyle V^{}NV^{}=(V^{}\setminus \Sigma ^{})\to V^{}} , where V ∗ N V ∗ {\displaystyle V^{}NV^{}} indicates concatenation and forces a non-terminal symbol to always be present on the left-hand side of the productions, and ∖ {\displaystyle \setminus } denotes set minus or set difference. If we do not allow the start symbol to occur in v {\displaystyle v} (the word on the right side), we have to replace V ∗ {\displaystyle V^{}} with ( V ∖ { S } ) ∗ {\displaystyle (V\setminus \{S\})^{}} on the right-hand side. The other types of formal grammar in the Chomsky hierarchy impose additional restrictions on what constitutes a production. Notably in a context-free grammar, the left-hand side of a production must be a single nonterminal symbol. So productions are of the form: N → V ∗ {\displaystyle N\to V^{}} == Grammar generation == To generate a string in the language, one begins with a string consisting of only a single start symbol, and then successively applies the rules (any number of times, in any order) to rewrite this string. This stops when a string containing only terminals is obtained. The language consists of all the strings that can be generated in this manner. Any particular sequence of legal choices taken during this rewriting process yields one particular string in the language. If there are multiple different ways of generating this single string, then the grammar is said to be ambiguous. For example, assume the alphabet consists of a {\displaystyle a} and b {\displaystyle b} , with the start symbol S {\displaystyle S} , and we have the following rules: 1. S → a S b {\displaystyle S\rightarrow aSb} 2. S → b a {\displaystyle S\rightarrow ba} then we start with S {\displaystyle S} , and can choose a rule to apply to it. If we choose rule 1, we replace S {\displaystyle S} with a S b {\displaystyle aSb} and obtain the string a S b {\displaystyle aSb} . If we choose rule 1 again, we replace S {\displaystyle S} with a S b {\displaystyle aSb} and obtain the string a a S b b {\displaystyle aaSbb} . This process is repeated until we only have symbols from the alphabet (i.e., a {\displaystyle a} and b {\displaystyle b} ). If we now choose rule 2, we replace S {\displaystyle S} with b a {\displaystyle ba} and obtain the string a a b a b b {\displaystyle aababb} , and are done. We can write this series of choices more briefly, using symbols: S ⇒ a S b ⇒ a a S b b ⇒ a a b a b b {\displaystyle S\Rightarrow aSb\Rightarrow aaSbb\Rightarrow aababb} . The language of the grammar is the set of all the strings that can be generated using this process: { b a , a b a b , a a b a b b , a a a b a b b b , … } {\displaystyle \{ba,abab,aababb,aaababbb,\dotsc \}} .
Audio-visual speech recognition
Audio visual speech recognition (AVSR) is a technique that uses image processing capabilities in lip reading to aid speech recognition systems in recognizing indeterministic phones or giving preponderance among near probability decisions. Each system of lip reading and speech recognition works separately, then their results are mixed at the stage of feature fusion. As the name suggests, it has two parts. First one is the audio part and second one is the visual part. In audio part we use features like log mel spectrogram, mfcc etc. from the raw audio samples and we build a model to get feature vector out of it . For visual part generally we use some variant of convolutional neural network to compress the image to a feature vector after that we concatenate these two vectors (audio and visual ) and try to predict the target object.
Automated storage and retrieval system
An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie
Bin picking
Bin picking (also referred to as random bin picking) is a core problem in computer vision and robotics. The goal is to have a robot with sensors and cameras attached to it pick-up known objects with random poses out of a bin using a suction gripper, parallel gripper, or other kind of robot end effector. Early work on bin picking made use of Photometric Stereo in recovering the shapes of objects and to determine their orientation in space. Amazon previously held a competition focused on bin picking referred to as the "Amazon Picking Challenge", which was held from 2015 to 2017. The challenge tasked entrants with building their own robot hardware and software that could attempt simplified versions of the general task of picking and stowing items on shelves. The robots were scored by how many items were picked and stowed in a fixed amount of time. The first Amazon Robotics challenge was won by a team from TU Berlin in 2015, followed by a team from TU Delft and the Dutch company "Fizyr" in 2016. The last Amazon Robotics Challenge was won by the Australian Centre for Robotic Vision at Queensland University of Technology with their robot named Cartman. The Amazon Robotics/Picking Challenge was discontinued following the 2017 competition. Although there can be some overlap, bin picking is distinct from "each picking" and the bin packing problem.
Radar geo-warping
Radar geo-warping is the adjustment of geo-referenced radar images and video data to be consistent with a geographical projection. This image warping avoids any restrictions when displaying it together with video from multiple radar sources or with other geographical data including scanned maps and satellite images which may be provided in a particular projection. There are many areas where geo warping has unique benefits: Single radar video signal displayed together with maps of different geographical projections. E.g. Mercator UTM stereographic Multiple radar video signals displayed simultaneously: Having the computing power to do so on one computer. Adapting the projection of all radar signals allowing the geographically correct display and accurate superimposition of those videos. Slant range correction: a modern 3D radar system can measure the height of a target and hence it is possible to correct the radar video by the real corrected range of the target. Slant Range Correction also allows to compensate the radar tower height e.g. for maritime surveillance radars. == Introduction == Radar video presents the echoes of electromagnetic waves a radar system has emitted and received as reflections afterwards. These echoes are typically presented on a computer screen with a color-coding scheme depicting the reflection strength. Two problems have to be solved during such a visualization process. The first problem arises from the fact that typically the radar antenna turns around its position and measures the reflection echo distances from its position in one direction. This effectively means that the radar video data are present in polar coordinates. In older systems the polar oriented picture has been displayed in so called plan position indicators (PPI). The PPI-scope uses a radial sweep pivoting about the center of the presentation. This results in a map-like picture of the area covered by the radar beam. A long-persistence screen is used so that the display remains visible until the sweep passes again. Bearing to the target is indicated by the target's angular position in relation to an imaginary line extending vertically from the sweep origin to the top of the scope. The top of the scope is either true north (when the indicator is operated in the true bearing mode) or ship's heading (when the indicator is operated in the relative bearing mode). For visualization on a modern computer screen the polar coordinates have to be converted into Cartesian coordinates. This process called radar scan conversion is presented with more detail in the next section. The second problem to solve arises from the fact that a radar system is placed in the real world and measures real world echo positions. These echoes have to be displayed together with other real world data like object positions, vector maps and satellite images in a consistent way. All this information refers to the curved earth surface but is displayed on a flat computer display. Building a link from real world earth positions to display pixels is commonly called geographical referencing or in short geo-referencing. Part of the geo-referencing process is to map the 3D earth surface onto a 2D display. This process of a geographical projection can be performed in many ways, but different data sources have their own 'natural' projection. E.g. Cartesian radar video data from a radar source on the earth surface are geo-referenced by a so-called radar projection. When using this radar projection the Cartesian radar video pixels can directly displayed on a computer screen (only being linearly transformed according to the current position on the screen and e.g. the current zoom level). A problem now arises if e.g. also a satellite map shall be shown together with the radar video data. The 'natural' geographical projection of a satellite image would be a satellite projection which depends on the satellite orbit, position and further parameters. Now either the satellite image has to be reprojected to a radar projection or the radar video has to use the satellite projection. This geographical re-projection is also called geographical warping or Geo Warping where each image pixel has to be transformed from one projection into another. This article describes in further detail the Geo Warping of radar video images in real time. It will also show that radar video Geo Warping is done most efficiently when it is integrated with the radar scan conversion process. == Radar-scan conversion == This section describes the principles of the radar-scan conversion (RSC) process. The radar supplies its measured data in polar coordinates (ρ,θ) directly from the rotating antenna. ρ defines the target/echo distance and θ the target angle in polar world coordinates. These data are measured, digitized and stored in a polar coordinate polar store or polar pixmap. The main RSC task is to convert these data to Cartesian (x, y) display coordinates, creating the necessary display pixels. The RSC process is influenced by the current zoom, shift and rotation settings defining which part of the 'world' shall be visible in the display image. As detailed later the RSC process also takes the currently used geographical projection into account when the radar video images are Geo Warped. The OpenGL RSC is implemented using a reverse scan conversion approach which calculates for every image pixel the most appropriate radar amplitude value in the polar store. This approach generates an optimal image without any artifacts known from forward spoke fill algorithms. By applying bi-linear filtering between adjacent pixels in the polar store during the conversion process the OpenGL RSC finally achieves a very high visual quality radar display image for every zoom level, creating smooth images of the radar echoes. == Radar projection == This section illustrates how radar video data are geo referenced and displayed on a computer screen. The radar sensor is positioned on the earth surface with a height h above the ground. It measures the direct distance d to the target (and not e.g. the distance the target is away from the radar if one would move on the earth surface). This distance is then used in the display plane after adjustment to the current display zoom level by the radar scan converter (RSC). Now it has to be clarified how the radar video data is geo referenced. This basically means, that if we want to display a geographical real world object (like e.g. a light house) which is at the same real world position as the radar target, that it also shall appear at the same position in the display plane. This is realized by calculating the distance from the radar sensor to the respective real world object and use that distance in the display plane. The position of the real world object is typically given in geographical coordinates (latitude, longitude and height above the earth surface). In other words, using a radar projection with geographical data is done by simulating a radar measurement process with the real world objects and use the resulting range and azimuth in the display plane. The second picture to the right shows an example radar projection with the center of projection (COP) at latitude 50.0° and longitude 0.0° which is also the radar position. The dashed lines are the equal-latitude and equal-longitude lines on top of the background map. The solid lines show equal-range and equal-azimuth with the respect to the radar position. It is a feature of the radar projection that equal-range lines are circles and equal-azimuth lines are straight lines. This is necessary to display radar video consistently with other map data when using a radar projection where the projection center has to be the radar position. == Geo Warping process == This section explains the actual geo warping or re-projection process when applied to radar video in real time. Assume we want to display radar video on top of a satellite image. As an example we use the CIB projection which is used to display satellite data in CIB (Controlled Image Base) format. The Figure Geo Warping Radar to CIB Projection shows dashed the maximal range circle for a range of 111 km or 60 miles using the radar projection. Such a range is typical for long range coastal surveillance radars. As stated in the last section this is a perfect circle also on the computer screen. The solid line ellipse shows the same range circle for the CIB projection. Typically the errors occurring without Geo Warping are smallest near the radar position if at least the projection center (COP) coincides with the radar position, as realized in our example. Otherwise the error distribution depends both on the used projection and also on the projection parameters. Thus, in our case the errors are most significant near the maximum radar range. The CIB projection error corrected in east–west direction at half the radar range is 2.6 km and is 5.3 km at the full radar range of 111 km. An error of 5.3 km is
Echo Lake (software)
Echo Lake (AKA Family Album Creator) was the most notable multimedia software product produced by Delrina, which debuted in June 1995. It was touted internally as a "cross [of] Quark Xpress and Myst". It featured an immersive 3D environment where a user could go to a virtual desktop in a virtual office and assemble video and audio clips along with images, and then print them out as either a virtual book other users of the program could use, or for print. It was a highly innovative product for its time, and ultimately was hampered by the inability of many users able to input their own multimedia content easily into a computer from that period. Creative Wonders bought the rights to the Echo Lake multimedia product, which was re-shaped as an introductory program on multimedia and re-released as Family Album Creator in 1996.