The ACTS Gigabit Satellite Network was a pioneering, high-speed communications satellite network in the years 1993-2004, created as a prototype system to explore high-speed networking of digital endpoints. The system was jointly sponsored by NASA and ARPA, implemented by BBN Technologies and Motorola, and was inducted into the Space Technology Hall of Fame in April 1997. The Advanced Communications Technology Satellite (ACTS) network was designed to provide fiber-compatible SONET service to remote nodes and networks through a wideband satellite system, and provided long-haul, point-to-point and point-to-multipoint full-duplex SONET services, at rates up to 622 Mbit/s, over NASA's Advanced Communication Technology Satellite (ACTS). The Advanced Communications Technology Satellite itself, built and operated by Lockheed Martin, was launched on STS-51 on September 12, 1993, by the Space Shuttle Discovery, and occupied a geostationary orbit at 100° west longitude. It was the first communication satellite to operate in the 20–30 GHz frequency band (Ka band), with 30 GHz uplink and 20 GHz downlink signals. The satellite incorporated advanced on-board switching and multiple dynamically-hopping spot-beam antennas for selected areas of the United States including Hawaii. Up to 3 uplink and 3 downlink antenna beams could be active simultaneously. The ACTS network ground terminals were transportable Gigabit Earth Stations (GES) with fiber-optic SONET interfaces (OC-3 and OC-12), which also supported the Asynchronous Transfer Mode (ATM) protocol suite. The network control and management functions are distributed in the various Gigabit Earth Stations, with the operator's interface being centralized in a Network Management Terminal (NMT), which could be collocated at a GES, or anywhere in the Internet. The system was operational and used for experiments for 127 months, instead of the originally planned 24–48 months. In all, 53 terminals were built and used by more than 100 experimenters to test ACTS abilities. In Nov. 1997 a record data rate of 520 Mbit/s TCP/IP throughput was achieved using ATM between several ground stations via ACTS. On May 31, 2000 the ACTS experiments program officially came to a close, but the system continued to support experiments until it was deactivated on April 28, 2004.
Windows Live OneCare Safety Scanner
Windows Live OneCare Safety Scanner (formerly Windows Live Safety Center and codenamed Vegas) was an online scanning, PC cleanup, and diagnosis service to help remove of viruses, spyware/adware, and other malware. It was a free web service that was part of Windows Live. On November 18, 2008, Microsoft announced the discontinuation of Windows Live OneCare, offering users a new free anti-malware suite Microsoft Security Essentials, which had been available since the second half of 2009. However, Windows Live OneCare Safety Scanner, under the same branding as Windows Live OneCare, was not discontinued during that time. The service was officially discontinued on April 15, 2011 and replaced with Microsoft Safety Scanner. == Overview == Windows Live OneCare Safety Scanner offered a free online scanning and protection from threats. The Windows Live OneCare Safety Scanner must be downloaded and installed to your computer to scan your computer. The "Full Service Scan" looks for common PC health issues such as viruses, temporary files, and open network ports. It searches and removes viruses, improves a computer's performance, and removes unnecessary clutter on the PC's hard disk. The user can choose between a "Full Scan" (which can be customized) or a "Quick Scan". The "Full Scan" scans for viruses (comprehensive scan or quick scan), hard disk performance (Disk fragmentation scan and/or Desk cleanup scan) and network safety (open port scan). The "Quick Scan" only scans for viruses, only on specific areas on the computer. The quick scan is faster than the full scan, hence that appellation. The service also provides a virus database, information about online threats, and general computer security documentation and tools. == Limits == The virus scanner on the Windows Live OneCare Safety Scanner site runs a scan of the user's computer only when the site is visited. It does not run periodic scans of the system, and does not provide features to prevent viruses from infecting the computer at the time, or thereafter. It simply resolves detected infections. Many users who have posted on the Product Feedback forum report script errors relating to Internet Explorer 7 (besides IE being the only browser supported by this service). The OneCare safety scanner team have been actively solving these problems, many of them registry-related.
Niki.ai
Niki was an artificial intelligence company headquartered in Bangalore, Karnataka. It was founded in May 2015 by IIT Kharagpur graduates Sachin Jaiswal, Keshav Prawasi, Shishir Modi, and Nitin Babel. The Niki android app was launched for a limited beta in June 2015, then released for public during YourStory's TechSparks 2015, and is a Tech30 company. The company raised an undisclosed amount in seed funding from Unilazer Ventures, a Mumbai-based VC firm founded by Ronnie Screwvala, in October 2015. This was followed by another seed funding round by Ratan Tata in May 2016. The company then raised US$2 million in Series A round of funding from SAP.iO, existing investors and some US and German-based investors, among others. Niki.ai shut down in October 2021 as per media reports. Website not working. == Product == The product is an artificial intelligence-powered chatbot which works as an intelligent personal assistant, named Niki. Leveraging natural language processing and machine learning, Niki presents a chat-based natural language user interface to the users where they can interact with Niki in their natural language. Niki understands how users chat in India, deciphers the words, in the context of product/services that they would like to purchase, and comes up with apt recommendations. Initially, it was only available on the Android platform as a mobile app. The company has expanded its operations to the Facebook Messenger and Apple iOS platforms. The company aims to soon be present on more messaging platforms like Slack and WhatsApp. The company currently provides 20+ services to over 2 million consumers, covering a wide spectrum ranging from utility services like mobile recharge, bill payments, travel services like cabs, buses, hotels and entertainment services like movies and events. Services such as flights and healthcare are also planned. == Partnerships == In September 2017, Infosys Finacle joined with Niki.ai to provide chat-based service to banking customers. In August 2017, Niki partnered with LazyPay to enable a 'buy now, pay later' feature for its users.
Query understanding
Query understanding is the process of inferring the intent of a search engine user by extracting semantic meaning from the searcher’s keywords. Query understanding methods generally take place before the search engine retrieves and ranks results. It is related to natural language processing but specifically focused on the understanding of search queries. == Methods == === Stemming and lemmatization === Many languages inflect words to reflect their role in the utterance they appear in. The variation between various forms of a word is likely to be of little importance for the relatively coarse-grained model of meaning involved in a retrieval system, and for this reason the task of conflating the various forms of a word is a potentially useful technique to increase recall of a retrieval system. Stemming algorithms, also known as stemmers, typically use a collection of simple rules to remove suffixes intended to model the language’s inflection rules. For some languages, there are simple lemmatisation methods to reduce a word in query to its lemma or root form or its stem; for others, this operation involves non-trivial string processing and may require recognizing the word's part of speech or referencing a lexical database. The effectiveness of stemming and lemmatization varies across languages. === Query Segmentation === Query segmentation is a key component of query understanding, aiming to divide a query into meaningful segments. Traditional approaches, such as the bag-of-words model, treat individual words as independent units, which can limit interpretative accuracy. For languages like Chinese, where words are not separated by spaces, segmentation is essential, as individual characters often lack standalone meaning. Even in English, the BOW model may not capture the full meaning, as certain phrases—such as "New York"—carry significance as a whole rather than as isolated terms. By identifying phrases or entities within queries, query segmentation enhances interpretation, enabling search engines to apply proximity and ordering constraints, ultimately improving search accuracy and user satisfaction. === Entity recognition === Entity recognition is the process of locating and classifying entities within a text string. Named-entity recognition specifically focuses on named entities, such as names of people, places, and organizations. In addition, entity recognition includes identifying concepts in queries that may be represented by multi-word phrases. Entity recognition systems typically use grammar-based linguistic techniques or statistical machine learning models. === Query rewriting === Query rewriting is the process of automatically reformulating a search query to more accurately capture its intent. Query expansion adds additional query terms, such as synonyms, in order to retrieve more documents and thereby increase recall. Query relaxation removes query terms to reduce the requirements for a document to match the query, thereby also increasing recall. Other forms of query rewriting, such as automatically converting consecutive query terms into phrases and restricting query terms to specific fields, aim to increase precision. === Spelling Correction === Automatic spelling correction is a critical feature of modern search engines, designed to address common spelling errors in user queries. Such errors are especially frequent as users often search for unfamiliar topics. By correcting misspelled queries, search engines enhance their understanding of user intent, thereby improving the relevance and quality of search results and overall user experience.
Condensation algorithm
The condensation algorithm (Conditional Density Propagation) is a computer vision algorithm. The principal application is to detect and track the contour of objects moving in a cluttered environment. Object tracking is one of the more basic and difficult aspects of computer vision and is generally a prerequisite to object recognition. Being able to identify which pixels in an image make up the contour of an object is a non-trivial problem. Condensation is a probabilistic algorithm that attempts to solve this problem. The algorithm itself is described in detail by Isard and Blake in a publication in the International Journal of Computer Vision in 1998. One of the most interesting facets of the algorithm is that it does not compute on every pixel of the image. Rather, pixels to process are chosen at random, and only a subset of the pixels end up being processed. Multiple hypotheses about what is moving are supported naturally by the probabilistic nature of the approach. The evaluation functions come largely from previous work in the area and include many standard statistical approaches. The original part of this work is the application of particle filter estimation techniques. The algorithm's creation was inspired by the inability of Kalman filtering to perform object tracking well in the presence of significant background clutter. The presence of clutter tends to produce probability distributions for the object state which are multi-modal and therefore poorly modeled by the Kalman filter. The condensation algorithm in its most general form requires no assumptions about the probability distributions of the object or measurements. == Algorithm overview == The condensation algorithm seeks to solve the problem of estimating the conformation of an object described by a vector x t {\displaystyle \mathbf {x_{t}} } at time t {\displaystyle t} , given observations z 1 , . . . , z t {\displaystyle \mathbf {z_{1},...,z_{t}} } of the detected features in the images up to and including the current time. The algorithm outputs an estimate to the state conditional probability density p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} by applying a nonlinear filter based on factored sampling and can be thought of as a development of a Monte-Carlo method. p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is a representation of the probability of possible conformations for the objects based on previous conformations and measurements. The condensation algorithm is a generative model since it models the joint distribution of the object and the observer. The conditional density of the object at the current time p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is estimated as a weighted, time-indexed sample set { s t ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{t}^{(n)},n=1,...,N\}} with weights π t ( n ) {\displaystyle \pi _{t}^{(n)}} . N is a parameter determining the number of sample sets chosen. A realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} is obtained by sampling with replacement from the set s t {\displaystyle s_{t}} with probability equal to the corresponding element of π t {\displaystyle \pi _{t}} . The assumptions that object dynamics form a temporal Markov chain and that observations are independent of each other and the dynamics facilitate the implementation of the condensation algorithm. The first assumption allows the dynamics of the object to be entirely determined by the conditional density p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} . The model of the system dynamics determined by p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} must also be selected for the algorithm, and generally includes both deterministic and stochastic dynamics. The algorithm can be summarized by initialization at time t = 0 {\displaystyle t=0} and three steps at each time t: === Initialization === Form the initial sample set and weights by sampling according to the prior distribution. For example, specify as Gaussian and set the weights equal to each other. === Iterative procedure === Sample with replacement N {\displaystyle N} times from the set { s 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{s_{0}^{(n)},n=1,...,N\}} with probability { π 0 ( n ) , n = 1 , . . . , N } {\displaystyle \{\pi _{0}^{(n)},n=1,...,N\}} to generate a realization of p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} . Apply the learned dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} to each element of this new set, to generate a new set { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . To take into account the current observation z t {\displaystyle \mathbf {z_{t}} } , set π t ( n ) = p ( z t | s ( n ) ) ∑ j = 1 N p ( z t | s ( j ) ) {\displaystyle \pi _{t}^{(n)}={\frac {p(\mathbf {z_{t}} |s^{(n)})}{\sum _{j=1}^{N}p(\mathbf {z_{t}} |s^{(j)})}}} for each element { s t ( n ) } {\displaystyle \{s_{t}^{(n)}\}} . This algorithm outputs the probability distribution p ( x t | z 1 , . . . , z t ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {z_{1},...,z_{t}} )} which can be directly used to calculate the mean position of the tracked object, as well as the other moments of the tracked object. Cumulative weights can instead be used to achieve a more efficient sampling. == Implementation considerations == Since object-tracking can be a real-time objective, consideration of algorithm efficiency becomes important. The condensation algorithm is relatively simple when compared to the computational intensity of the Ricatti equation required for Kalman filtering. The parameter N {\displaystyle N} , which determines the number of samples in the sample set, will clearly hold a trade-off in efficiency versus performance. One way to increase efficiency of the algorithm is by selecting a low degree of freedom model for representing the shape of the object. The model used by Isard 1998 is a linear parameterization of B-splines in which the splines are limited to certain configurations. Suitable configurations were found by analytically determining combinations of contours from multiple views, of the object in different poses, and through principal component analysis (PCA) on the deforming object. Isard and Blake model the object dynamics p ( x t | x t − 1 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )} as a second order difference equation with deterministic and stochastic components: p ( x t | x t − 1 ) ∝ e − 1 2 | | B − 1 ( ( x t − x ¯ ) − A ( x t − 1 − x ¯ ) ) | | 2 ) {\displaystyle p(\mathbf {x_{t}} |\mathbf {x_{t-1}} )\propto e^{-{\frac {1}{2}}||B^{-1}((\mathbf {x_{t}} -\mathbf {\bar {x}} )-A(\mathbf {x_{t-1}} -\mathbf {\bar {x}} ))||^{2})}} where x ¯ {\displaystyle \mathbf {\bar {x}} } is the mean value of the state, and A {\displaystyle A} , B {\displaystyle B} are matrices representing the deterministic and stochastic components of the dynamical model respectively. A {\displaystyle A} , B {\displaystyle B} , and x ¯ {\displaystyle \mathbf {\bar {x}} } are estimated via Maximum Likelihood Estimation while the object performs typical movements. The observation model p ( z | x ) {\displaystyle p(\mathbf {z} |\mathbf {x} )} cannot be directly estimated from the data, requiring assumptions to be made in order to estimate it. Isard 1998 assumes that the clutter which may make the object not visible is a Poisson random process with spatial density λ {\displaystyle \lambda } and that any true target measurement is unbiased and normally distributed with standard deviation σ {\displaystyle \sigma } . The basic condensation algorithm is used to track a single object in time. It is possible to extend the condensation algorithm using a single probability distribution to describe the likely states of multiple objects to track multiple objects in a scene at the same time. Since clutter can cause the object probability distribution to split into multiple peaks, each peak represents a hypothesis about the object configuration. Smoothing is a statistical technique of conditioning the distribution based on both past and future measurements once the tracking is complete in order to reduce the effects of multiple peaks. Smoothing cannot be directly done in real-time since it requires information of future measurements. == Applications == The algorithm can be used for vision-based robot localization of mobile robots. Instead of tracking the position of an object in the scene, however, the position of the camera platform is tracked. This allows the camera platform to be globally localized given a visual map of the environment. Extensions of the condensation algorithm have also been used to recognize human gestures in image sequences. This application of the condensation algorithm impacts the ran
Automatic acquisition of sense-tagged corpora
The knowledge acquisition bottleneck is perhaps the major impediment to solving the word-sense disambiguation (WSD) problem. Unsupervised learning methods rely on knowledge about word senses, which is barely formulated in dictionaries and lexical databases. Supervised learning methods depend heavily on the existence of manually annotated examples for every word sense, a requisite that can so far be met only for a handful of words for testing purposes, as it is done in the Senseval exercises. == Existing methods == Therefore, one of the most promising trends in WSD research is using the largest corpus ever accessible, the World Wide Web, to acquire lexical information automatically. WSD has been traditionally understood as an intermediate language engineering technology which could improve applications such as information retrieval (IR). In this case, however, the reverse is also true: Web search engines implement simple and robust IR techniques that can be successfully used when mining the Web for information to be employed in WSD. The most direct way of using the Web (and other corpora) to enhance WSD performance is the automatic acquisition of sense-tagged corpora, the fundamental resource to feed supervised WSD algorithms. Although this is far from being commonplace in the WSD literature, a number of different and effective strategies to achieve this goal have already been proposed. Some of these strategies are: acquisition by direct Web searching (searches for monosemous synonyms, hypernyms, hyponyms, parsed gloss' words, etc.), Yarowsky algorithm (bootstrapping), acquisition via Web directories, and acquisition via cross-language meaning evidences. == Summary == === Optimistic results === The automatic extraction of examples to train supervised learning algorithms reviewed has been, by far, the best explored approach to mine the web for word-sense disambiguation. Some results are certainly encouraging: In some experiments, the quality of the Web data for WSD equals that of human-tagged examples. This is the case of the monosemous relatives plus bootstrapping with Semcor seeds technique and the examples taken from the ODP Web directories. In the first case, however, Semcor-size example seeds are necessary (and only available for English), and it has only been tested with a very limited set of nouns; in the second case, the coverage is quite limited, and it is not yet clear whether it can be grown without compromising the quality of the examples retrieved. It has been shown that a mainstream supervised learning technique trained exclusively with web data can obtain better results than all unsupervised WSD systems which participated at Senseval-2. Web examples made a significant contribution to the best Senseval-2 English all-words system. === Difficulties === There are, however, several open research issues related to the use of Web examples in WSD: High precision in the retrieved examples (i.e., correct sense assignments for the examples) does not necessarily lead to good supervised WSD results (i.e., the examples are possibly not useful for training). The most complete evaluation of Web examples for supervised WSD indicates that learning with Web data improves over unsupervised techniques, but the results are nevertheless far from those obtained with hand-tagged data, and do not even beat the most-frequent-sense baseline. Results are not always reproducible; the same or similar techniques may lead to different results in different experiments. Compare, for instance, Mihalcea (2002) with Agirre and Martínez (2004), or Agirre and Martínez (2000) with Mihalcea and Moldovan (1999). Results with Web data seem to be very sensitive to small differences in the learning algorithm, to when the corpus was extracted (search engines change continuously), and on small heuristic issues (e.g., differences in filters to discard part of the retrieved examples). Results are strongly dependent on bias (i.e., on the relative frequencies of examples per word sense). It is unclear whether this is simply a problem of Web data, or an intrinsic problem of supervised learning techniques, or just a problem of how WSD systems are evaluated (indeed, testing with rather small Senseval data may overemphasize sense distributions compared to sense distributions obtained from the full Web as corpus). In any case, Web data has an intrinsic bias, because queries to search engines directly constrain the context of the examples retrieved. There are approaches that alleviate this problem, such as using several different seeds/queries per sense or assigning senses to Web directories and then scanning directories for examples; but this problem is nevertheless far from being solved. Once a Web corpus of examples is built, it is not entirely clear whether its distribution is safe from a legal perspective. === Future === Besides automatic acquisition of examples from the Web, there are some other WSD experiments that have profited from the Web: The Web as a social network has been successfully used for cooperative annotation of a corpus (OMWE, Open Mind Word Expert project), which has already been used in three Senseval-3 tasks (English, Romanian and Multilingual). The Web has been used to enrich WordNet senses with domain information: topic signatures and Web directories, which have in turn been successfully used for WSD. Also, some research benefited from the semantic information that the Wikipedia maintains on its disambiguation pages. It is clear, however, that most research opportunities remain largely unexplored. For instance, little is known about how to use lexical information extracted from the Web in knowledge-based WSD systems; and it is also hard to find systems that use Web-mined parallel corpora for WSD, even though there are already efficient algorithms that use parallel corpora in WSD.
Region Based Convolutional Neural Networks
Region-based Convolutional Neural Networks (R-CNN) are a family of machine learning models for computer vision, and specifically object detection and localization. The original goal of R-CNN was to take an input image and produce a set of bounding boxes as output, where each bounding box contains an object and also the category (e.g. car or pedestrian) of the object. In general, R-CNN architectures perform selective search over feature maps outputted by a CNN. R-CNN has been extended to perform other computer vision tasks, such as: tracking objects from a drone-mounted camera, locating text in an image, and enabling object detection in Google Lens. Mask R-CNN is also one of seven tasks in the MLPerf Training Benchmark, which is a competition to speed up the training of neural networks. == History == The following covers some of the versions of R-CNN that have been developed. November 2013: R-CNN. April 2015: Fast R-CNN. June 2015: Faster R-CNN. March 2017: Mask R-CNN. December 2017: Cascade R-CNN is trained with increasing Intersection over Union (IoU, also known as the Jaccard index) thresholds, making each stage more selective against nearby false positives. June 2019: Mesh R-CNN adds the ability to generate a 3D mesh from a 2D image. == Architecture == For review articles see. === Selective search === Given an image (or an image-like feature map), selective search (also called Hierarchical Grouping) first segments the image by the algorithm in (Felzenszwalb and Huttenlocher, 2004), then performs the following: Input: (colour) image Output: Set of object location hypotheses L Segment image into initial regions R = {r1, ..., rn} using Felzenszwalb and Huttenlocher (2004) Initialise similarity set S = ∅ foreach Neighbouring region pair (ri, rj) do Calculate similarity s(ri, rj) S = S ∪ s(ri, rj) while S ≠ ∅ do Get highest similarity s(ri, rj) = max(S) Merge corresponding regions rt = ri ∪ rj Remove similarities regarding ri: S = S \ s(ri, r∗) Remove similarities regarding rj: S = S \ s(r∗, rj) Calculate similarity set St between rt and its neighbours S = S ∪ St R = R ∪ rt Extract object location boxes L from all regions in R === R-CNN === With R-CNN, prediction follows a two-step process. A preprocessing selective search step generates a large set of candidate objects (typically as many as 2000), known as regions of interest (ROI). These are forwarded to a CNN, which predicts an object class score and bounding box estimate, independently for each ROI. Importantly, the ROIs are heavily filtered to remove excess candidates. This is achieved using two mechanism. Filtering begins by removing ROIs assigned to the background category. This is a specialized category, which is scored by the CNN alongside other categories. An unfortunate reality is that remaining ROIs typically suffer from heavy duplication. Namely, multiple ROIs that cover same objects in the image are all assigned non-background categories. This is resolved by a heuristic non-maximum suppression (NMS) step. === Fast R-CNN === While the original R-CNN independently computed the neural network features on each of as many as two thousand regions of interest, Fast R-CNN runs the neural network once on the whole image. At the end of the network is a ROIPooling module, which slices out each ROI from the network's output tensor, reshapes it, and classifies it. As in the original R-CNN, the Fast R-CNN uses selective search to generate its region proposals. === Faster R-CNN === While Fast R-CNN used selective search to generate ROIs, Faster R-CNN integrates the ROI generation into the neural network itself. === Mask R-CNN === While previous versions of R-CNN focused on object detections, Mask R-CNN adds instance segmentation. Mask R-CNN also replaced ROIPooling with a new method called ROIAlign, which can represent fractions of a pixel.